ybin/ybin

#! /bin/sh

###############################################################################
##
## ybin (YaBoot INstaller) installs/updates the yaboot bootloader.
## Copyright (C) 2000, 2001, 2002, 2003 Ethan Benson
##
## This program is free software; you can redistribute it and/or
## modify it under the terms of the GNU General Public License
## as published by the Free Software Foundation; either version 2
## of the License, or (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
##
###############################################################################

PATH="/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin"
## allow to run out of /target in boot-floppies
if [ -n "$PATH_PREFIX" ] ; then
    PATH="${PATH}:${PATH_PREFIX}/sbin:${PATH_PREFIX}/bin:${PATH_PREFIX}/usr/sbin:${PATH_PREFIX}/usr/bin:${PATH_PREFIX}/usr/local/sbin:${PATH_PREFIX}/usr/local/bin"
fi
PRG="${0##*/}"
ABSPRG="$0"
SIGINT="$PRG: Interrupt caught ... exiting"
VERSION=1.3.13
DEBUG=0
VERBOSE=0
TMP="${TMPDIR:-/tmp}"
export LC_COLLATE=C

## avoid older versions of ofpath shipped in debian boot-floppies etc.
if [ -x "${PATH_PREFIX}/usr/sbin/ofpath" ] ; then
    OFPATH="${PATH_PREFIX}/usr/sbin/ofpath"
else
    OFPATH=ofpath
fi

## catch signals, clean up junk in /tmp.
trap "cleanup" 0
trap "exit 129" 1
trap "echo 1>&2 $SIGINT ; exit 130" 2
trap "exit 131" 3
trap "exit 143" 15

## allow for non-existent config file, in which case it will be
## generated from command line arguments.
if [ -f /etc/yaboot.conf ] ; then
    CONF=/etc/yaboot.conf
    bootconf=$CONF
    ERR=" Error in $CONF:"
else
    CONF=/dev/null
    bootconf=/dev/null
fi

## define default configuration
boot=unconfigured

## allow default to work on packaged and non-packaged yaboot. 
## no default for magicboot since it is not required everywhere.
if [ -f /usr/local/lib/yaboot/yaboot ] ; then
    install=/usr/local/lib/yaboot/yaboot
elif [ -f /usr/lib/yaboot/yaboot ] ; then
    install=/usr/lib/yaboot/yaboot
fi

## defaults
usemount=no
if (cat /proc/cpuinfo 2> /dev/null | grep ^machine | grep -q 'CHRP IBM') ; then
    fstype=raw
else
    fstype=hfs
fi
hfstype=tbxi
hfscreator=UNIX
bless=yes
protect=no
hide=no
nonvram=0
defaultos=linux
brokenosx=no
cdrom=no
network=no
of=no
fgcolor=white
bgcolor=black

## yaboot autoconf defaults
label=Linux
timeout=40
image=/vmlinux
partition=3
root=/dev/hda3
device=hd:

## this program behaves differently based on how its called, this
## ensures that nothing nasty happens if someone makes a bogus
## symlink.
case "$PRG" in
    ybin)
    ;;
    mkofboot)
    ;;
    *)
    echo 1>&2 "This program must be called as either \`ybin' or \`mkofboot'"
    exit 1
    ;;
esac

## check for printf, use it if possible otherwise fall back on
## unreliable echo -e -n ("SUS" says echo shall support no switches)
if [ "$(printf printf_test 2>/dev/null)" = printf_test ] ; then
    PRINTF=printf
else
    PRINTF="echo -e -n"
fi

## make fake `id' if its missing, outputs 0 since if its missing we
## are probably running on boot floppies and thus are root.
if (command -v id > /dev/null 2>&1) ; then 
    true
else
    id()
    {
    echo 0
    }
fi

## --version output
version()
{
echo \
"$PRG $VERSION
Written by Ethan Benson

Copyright (C) 2000, 2001, 2002, 2003 Ethan Benson
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
}

## --help output.
usage()
{
echo \
"Usage: $PRG [OPTION]...
Update/install bootloader onto a bootstrap partition.

  -b, --boot                 set bootstrap partition device [ -b /dev/hda2 ]
  -o, --ofboot               set bootstrap partition OpenFirmware device
			       default: automatically determined [ -o hd:2 ]
  -i, --install              pathname to the actual bootloader binary
                               default: /usr/{local/}lib/yaboot/yaboot same as
                               install= in config file [ -i bootloader_file ]
  -C, --config               use alternate configuration file (ybin and yaboot)
			       [ -C config_file ]
  -m, --magicboot            pathname to a OpenFirmware magicboot (CHRP) script
      --filesystem           set the filesystem type of the bootstrap partition
                               available options are hfs, msdos, and raw
			       [ --filesystem hfs ] default is hfs
      --nobless              don't bless the root directory, this should only
                               be used if you are using a MacOS boot partition
			       as the bootstrap partition (not recommended)
  -M, --mount                don't use userspace hfsutils to modify the
			       bootstrap instead try and mount the filesystem
                               directly.  Note that attributes cannot be set
			       this way and you will have to manually modify
			       OpenFirmware to make your system bootable
      --protect              set the read-only (locked) bit on all bootstrap
			       files
      --hide                 set the invisible bit on all bootstrap files
                               this is useful of you don't want them to be
                               visible from MacOS.
      --nonvram              do not update the boot-device variable in nvram.
      --force                don't ever ask for confirmation
  -v, --verbose              make $PRG more verbose
      --debug                print boring junk only useful for debugging
  -h, --help                 display this help and exit
  -V, --version              output version information and exit"
}

## configuration file parsing. FIXME: need a method which can parse
## image= sections.
parseconf()
{
case "$1" in
    str)
       v=`grep "^$2[\ ,=]" "$CONF"` ; echo "${v#*=}"
       ;;
    flag)
       grep "^$2\>" "$CONF" > /dev/null && echo 0 || echo 1
       ;;
    ck)
       grep "^$2[\ ,=]" "$CONF" > /dev/null && echo 0 || echo 1
       ;;
esac
}

## check for existence of a configuration file, and make sure we have
## read permission.
confexist()
{
    if [ ! -e "$CONF" ] ; then
	echo 1>&2 "$PRG: $CONF: No such file or directory"
	return 1
    elif [ ! -f "$CONF" ] ; then
	echo 1>&2 "$PRG: $CONF: Not a regular file"
	return 1
    elif [ ! -r "$CONF" ] ; then
	echo 1>&2 "$PRG: $CONF: Permission denied"
	return 1
    else
	return 0
    fi
}

## check to make sure the configuration file is sane and correct.
## maybe this is an insane ammount of error checking, but I want to
## make sure (hopfully) nothing unexpected ever happens.  and i just
## like useful errors from programs.  every error just marks an error
## variable so we give the user as much info as possible before we
## abandon ship.
checkconf()
{
    if [ ! -e "$boot" ] ; then
	echo 1>&2 "$PRG: $boot: No such file or directory"
	local CONFERR=1
    elif [ ! -b "$boot" -a ! -f "$boot" ] ; then
	echo 1>&2 "$PRG: $boot: Not a regular file or block device"
	local CONFERR=1
    elif [ ! -w "$boot" -o ! -r "$boot" ] ; then
	[ -z "$mntpoint" ] && echo 1>&2 "$PRG: $boot: Permission denied"
	[ -z "$mntpoint" ] && CONFERR=1
    fi

    if [ ! -e "$install" ] ; then
	echo 1>&2 "$PRG: $install: No such file or directory"
	local CONFERR=1
    elif [ ! -f "$install" ] ; then
	echo 1>&2 "$PRG: $bootconf: Not a regular file"
	local CONFERR=1
    elif [ ! -r "$install" ] ; then
	echo 1>&2 "$PRG: $install: Permission denied"
	local CONFERR=1
    fi

    if [ "$bootconf" = auto ] ; then
	true
    elif [ ! -e "$bootconf" ] ; then
	echo 1>&2 "$PRG: $bootconf: No such file or directory"
	local CONFERR=1
    elif [ ! -f "$bootconf" ] ; then
	echo 1>&2 "$PRG: $bootconf: Not a regular file"
	local CONFERR=1
    elif [ ! -r "$bootconf" ] ; then
	echo 1>&2 "$PRG: $bootconf: Permission denied"
	local CONFERR=1
    fi

    if [ -n "$magicboot" ] ; then
	if [ ! -e "$magicboot" ] ; then
	    echo 1>&2 "$PRG: $magicboot: No such file or directory"
	    local CONFERR=1
	elif [ ! -f "$magicboot" ] ; then
	    echo 1>&2 "$PRG: $magicboot: Not a regular file"
	    local CONFERR=1
	elif [ ! -r "$magicboot" ] ; then
	    echo 1>&2 "$PRG: $magicboot: Permission denied"
	    local CONFERR=1
	fi
    fi

    case "$fstype" in
	hfs|msdos|raw)
	 ;;
	*)
	 if [ "$ARGFS" = 1 ] ; then
	    echo 1>&2 "$PRG: --filesystem must be either \`hfs', \`msdos', or \`raw'"
	 else
	    echo 1>&2 "$PRG:$ERR \`fstype' must be either \`hfs', \`msdos', or \`raw'"
	 fi
	 local CONFERR=1
	 ;;
    esac

    ## if we are not using HFS filesystems we don't care about HFS
    ## specific options.
    if [ "$fstype" = hfs ] ; then
	if [ `echo ${#hfstype}` != 4 ] ; then
	    if [ "$ARGTP" = 1 ] ; then
		echo 1>&2 "$PRG: --type must be 4 characters"
	    else
		echo 1>&2 "$PRG:$ERR \`hfstype' must be 4 characters"
	    fi
	    local CONFERR=1
	fi
	
	if [ `echo ${#hfscreator}` != 4 ] ; then
	    if [ "$ARGCT" = 1 ] ; then
		echo 1>&2 "$PRG: --creator must be 4 characters"
	    else
		echo 1>&2 "$PRG:$ERR \`hfscreator' must be 4 characters"
	    fi
	    local CONFERR=1
	fi
    fi

    ## some options are not compatible with fstype=raw
    if [ "$fstype" = raw ] ; then
	if [ -n "$mntpoint" ] ; then
	    echo 1>&2 "$PRG:$ERR \`mntpoint' is not compatible with fstype=raw"
	    local CONFERR=1
	fi
	if [ "$usemount" = yes ] ; then
	    echo 1>&2 "$PRG:$ERR \`usemount' is not compatible with fstype=raw"
	    local CONFERR=1
	fi
	if [ -n "$magicboot" ] ; then
	    echo 1>&2 "$PRG:$ERR \`magicboot' scripts cannot be used with fstype=raw"
	    local CONFERR=1
	fi
    fi

    if [ -n "$mntpoint" ] ; then
	## standard checks
	if [ ! -e "$mntpoint" ] ; then
	    echo 1>&2 "$PRG: $mntpoint: No such file or directory"
	    local CONFERR=1
	elif [ ! -d "$mntpoint" ] ; then
	    echo 1>&2 "$PRG: $mntpoint: Not a directory"
	    local CONFERR=1
	elif [ ! -w "$mntpoint" -o ! -r "$mntpoint" ] ; then
	    echo 1>&2 "$PRG: $mntpoint: Permission denied"
	    local CONFERR=1
	elif [ ! -O "$mntpoint" -a `id -u` != 0 ] ; then
	    echo 1>&2 "$PRG: $mntpoint: Permission denied (not owner)"
	    local CONFERR=1
	fi

	## make sure no embedded spaces exist
	echo "$mntpoint" | grep -q [[:space:]]
	if [ $? = 0 ] ; then
	    echo 1>&2 "$PRG:$ERR \`mntpoint=$mntpoint' contains embedded spaces, don't use lame filenames"
	    local CONFERR=1
	fi

	## make sure $mntpoint is on $boot, this matters to nvram updating.
	if [ "$(v=`df "$mntpoint" 2> /dev/null | grep ^/dev/` ; echo ${v%%[ ]*})" != "$boot" -a -d "$mntpoint" ] ; then
	    echo 1>&2 "$PRG: $mntpoint is not located on $boot"
	    local CONFERR=1
	    ## more then one subdirectory deep is not supported. no sed available on boot floppies ( / -> \ )
	elif [ "$mntpoint" != "$(v=`df "$mntpoint" 2> /dev/null | grep ^/dev/` ; echo ${v##*[ ]})" ] ; then
	    echo "$(v=`df "$mntpoint" 2>/dev/null | grep ^/dev/`; m=${v##*[ ]}; echo "${mntpoint##*$m/}")" | grep -q /
	    if [ $? = 0 ] ; then
		echo 1>&2 "$PRG:$ERR $mntpoint is more then one subdirectory deep from root of $boot"
		local CONFERR=1
	    else
		OFDIR="$(v=`df "$mntpoint" 2>/dev/null | grep ^/dev/`; m=${v##*[ ]}; echo "${mntpoint##*$m/}")"
	    fi
	fi

	if [ "$usemount" = no ] ; then
	    echo 1>&2 "$PRG:$ERR \`mntpoint=' requires \`usemount' be set"
	    local CONFERR=1
	fi
    fi

    if [ -n "$magicboot" ] ; then
	## check for bsd loader
	if [ -n "$bsd" ] ; then
	    if [ -f /usr/lib/yaboot/ofwboot -a -r /usr/lib/yaboot/ofwboot ] ; then
		BSDLOADER="/usr/lib/yaboot/ofwboot"
	    elif [ -f /usr/local/lib/yaboot/ofwboot -a -r /usr/local/lib/yaboot/ofwboot ] ; then
		BSDLOADER="/usr/local/lib/yaboot/ofwboot"
	    else
		echo 1>&2 "$PRG: /usr/local/lib/yaboot/ofwboot: No such file or directory"
		echo 1>&2 "$PRG: With the bsd= option set you must have the bsd boot loader ofwboot"
		CONFERR=1
	    fi
	fi

	## convert defaultos variable
	case "$defaultos" in 
	    linux|Linux|GNU|Gnu|gnu)
		defaultos=bootyaboot
		;;
	    bootyaboot)
		;;
	    bsd)
		defaultos=bootbsd
		if [ -z "$bsd" ] ; then
		    echo 1>&2 "$PRG:$ERR no entry for \`bsd' found, but defaultos is set to \`bsd'"
		    local CONFERR=1
		fi
		;;
	    macos)
		defaultos=bootmacos
		if [ -z "$macos" ] ; then
		    echo 1>&2 "$PRG:$ERR no entry for \`macos' found, but defaultos is set to \`macos'"
		    local CONFERR=1
		fi
		;;
	    macosx)
		defaultos=bootmacosx
		if [ -z "$macosx" ] ; then
		    echo 1>&2 "$PRG:$ERR no entry for \`macosx' found, but defaultos is set to \`macosx'"
		    local CONFERR=1
		fi
		;;
	    darwin)
		defaultos=bootdarwin
		if [ -z "$darwin" ] ; then
		    echo 1>&2 "$PRG:$ERR no entry for \`darwin' found, but defaultos is set to \`darwin'"
		    local CONFERR=1
		fi
		;;
	    *)
		echo 1>&2 "$PRG:$ERR \`defaultos' must be either \`linux', \`bsd', \`macos' or \`macosx'"
		local CONFERR=1
		;;
	esac
    fi

    ## nvsetenv requires /proc
    if [ ! -f /proc/uptime -a "$nonvram" = 0 ] ; then
	echo 1>&2 "$PRG: /proc filesystem is not mounted, nvram will not be updated"
	nonvram=1
    fi

    if [ "$nonvram" = 0 ] ; then
	## see if nvsetenv exists and is executable
	if (command -v nvsetenv > /dev/null 2>&1) ; then
	    [ -x `command -v nvsetenv` ] || MISSING=1 ; else MISSING=1
	fi

	if [ "$nonvram" = 0 ] ; then
	    ## if nvsetenv exists see if its the old broken version
	    if [ "$MISSING" != 1 ] ; then
		nvsetenv --version > /dev/null 2>&1 || OLD=1
	    else
		nonvram=1
		echo 1>&2 "$PRG: Warning: \`nvsetenv' could not be found, nvram will not be updated"
	    fi

	    if [ "$OLD" = 1 ] ; then
		## i check this myself to avoid misleading error
		## messages. nvsetenv should REALLY support --version.
		if [ ! -e /dev/nvram ] ; then
		    echo 1>&2 "$PRG: /dev/nvram: No such file or directory"
		    echo 1>&2 "$PRG: Warning: nvram will not be updated"
		    nonvram=1
		elif [ ! -c /dev/nvram ] ; then
		    echo 1>&2 "$PRG: /dev/nvram: Not a character device"
		    echo 1>&2 "$PRG: Warning: nvram will not be updated"
		    nonvram=1
		elif [ ! -w /dev/nvram -o ! -r /dev/nvram ] ; then
		    echo 1>&2 "$PRG: /dev/nvram: Permission denied"
		    echo 1>&2 "$PRG: Warning: nvram will not be updated"
		    nonvram=1
		elif ! (dd if=/dev/nvram of=/dev/null bs=1 count=10 > /dev/null 2>&1) ; then
		    echo 1>&2 "$PRG: /dev/nvram: No such device"
		    echo 1>&2 "$PRG: Warning: nvram will not be updated"
		    nonvram=1
		else
		    nonvram=1
		    echo 1>&2 "$PRG: Warning: Incompatible version of \`nvsetenv', nvram will not be updated"
		fi
	    fi
	fi

	if [ -f "$boot" ] ; then
	    echo 1>&2 "$PRG: $boot is a regular file, disabling nvram updating"
	    nonvram=1
	fi
    fi

    ## check for newworld mac. use cat hack due to /proc wierdness.
    ## do not bail if we are on an OldWorld only warn (very loudly).
    if [ "$(v=`cat /proc/cpuinfo 2>/dev/null | grep pmac-generation` ; echo ${v##*:})" = NewWorld ] ; then
	true
    elif [ "$(v=`cat /proc/cpuinfo 2>/dev/null | grep pmac-generation` ; echo ${v##*:})" = OldWorld ] ; then
	echo 1>&2
	echo 1>&2 '@@@@@@@@@@@@@@ WARNING!! WARNING!! WARNING!! @@@@@@@@@@@@@@'
	echo 1>&2 "$PRG: Warning: This is an OldWorld PowerMac, $boot will **NOT** be bootable on this machine"
	echo 1>&2 "$PRG: Oldworld PowerMacs need to use the quik bootloader, not yaboot"
	echo 1>&2 '@@@@@@@@@@@@@@ WARNING!! WARNING!! WARNING!! @@@@@@@@@@@@@@'
	echo 1>&2
	[ "$nonvram" = 0 ] && echo 1>&2 "$PRG: OldWorld PowerMac, nvram will not be updated"
	nonvram=1
    elif (cat /proc/cpuinfo 2>/dev/null | grep ^motherboard | grep -q AAPL) ; then
	echo 1>&2
	echo 1>&2 '@@@@@@@@@@@@@@ WARNING!! WARNING!! WARNING!! @@@@@@@@@@@@@@'
	echo 1>&2 "$PRG: Warning: This is an OldWorld PowerMac, $boot will **NOT** be bootable on this machine"
	echo 1>&2 "$PRG: Oldworld PowerMacs need to use the quik bootloader, not yaboot"
	echo 1>&2 '@@@@@@@@@@@@@@ WARNING!! WARNING!! WARNING!! @@@@@@@@@@@@@@'
	echo 1>&2
	[ "$nonvram" = 0 ] && echo 1>&2 "$PRG: OldWorld PowerMac, nvram will not be updated"
	nonvram=1
    elif (cat /proc/cpuinfo 2> /dev/null | grep ^machine | grep -q 'CHRP IBM') ; then
	## IBM hardware does not need nvram update AFAICT
	nonvram=1
	ADDNOTE=yes
    else
	#echo 1>&2 "$PRG: Warning: Unknown archetecture, $boot may not be bootable on this machine"
	[ "$nonvram" = 0 ] && echo 1>&2 "$PRG: Warning: Unknown architecture, nvram will not be updated"
	nonvram=1
    fi

    ## convert human readable color values from config to proper color
    ## codes
    case "$fgcolor" in
	black) fgc=0 ;;	blue) fgc=1 ;; green) fgc=2 ;; cyan) fgc=3 ;;
	red) fgc=4 ;; purple) fgc=5 ;; brown) fgc=6 ;; light-gray) fgc=7 ;;
	dark-gray) fgc=8 ;; light-blue) fgc=9 ;; light-green) fgc=a ;;
	light-cyan) fgc=b ;; light-red) fgc=c ;; light-purple) fgc=d ;;
	yellow) fgc=e ;; white) fgc=f ;;
	*)
	echo 1>&2 "$PRG:$ERR Invalid fgcolor: \`$fgcolor'"
	local CONFERR=1
	;;
    esac
    case "$bgcolor" in
	black) bgc=0 ;;	blue) bgc=1 ;; green) bgc=2 ;; cyan) bgc=3 ;;
	red) bgc=4 ;; purple) bgc=5 ;; brown) bgc=6 ;; light-gray) bgc=7 ;;
	dark-gray) bgc=8 ;; light-blue) bgc=9 ;; light-green) bgc=a ;;
	light-cyan) bgc=b ;; light-red) bgc=c ;; light-purple) bgc=d ;;
	yellow) bgc=e ;; white) bgc=f ;;
	*)
	echo 1>&2 "$PRG:$ERR Invalid bgcolor: \`$bgcolor'"
	local CONFERR=1
	;;
    esac

    ## if delay is not set use yaboot's timeout
    if [ -z "$delay" ] ; then
	delay="$(($timeout / 10))"
    fi

    if [ "$CONFERR" = 1 ] ; then
	return 1
    else
	return 0
    fi
}


## if readlink is missing use a kludge
if (command -v readlink > /dev/null 2>&1) ; then
    true
else
    readlink()
    {
	local SYMTARGET="$(v=`ls -l "$2" 2>/dev/null` ; echo ${v##*> })"
	if [ -n "$SYMTARGET" ] ; then
	    echo "$SYMTARGET"
	    return 0
	else
	    return 1
	fi
    }
fi

## /etc/yaboot.conf with password should not be world readable.
permcheck()
{
if [ -L "$bootconf" ] ; then
    local realfile="$(readlink -f "$bootconf")" || return 0
else
    local realfile="$bootconf"
fi

## don't bother if we could not read the symlink
[ -z "$realfile" ] && return 0
[ ! -f "$realfile" ] && return 0

## get permissions, and don't bother checking if we can't
local PERM=`v=$(ls -l "$realfile" 2>/dev/null) ; echo ${v%% *}`
[ -z "$PERM" ] && return 0
[ `echo ${#PERM}` != 10 ] && return 0

case "$PERM" in
    -rw-------|-r--------)
      if [ ! -O "$realfile" -a `id -u` = 0 ] ; then
	 echo 1>&2 "$PRG: Warning: $bootconf is not owned by root"
      fi
      ;;
    -rw-r-----|-r--r-----)
      if [ ! -O "$realfile" -a `id -u` = 0 ] ; then
	 echo 1>&2 "$PRG: Warning: $bootconf is not owned by root"
      fi
      if [ ! -G "$realfile" -a `id -g` = 0 ] ; then
	 echo 1>&2 "$PRG: Warning: $bootconf is not owned by group root"
      fi
      ;;
    -r--r--r--|-rw-r--r--|-rw-rw-r--|-rw-rw-rw-|-rw-rw----)
      echo 1>&2 "$PRG: Warning: Insecure permissions on $bootconf: $PERM should be -rw-------"
      ;;
    *)
      echo 1>&2 "$PRG: Warning: Incorrect permissions on $bootconf: $PERM should be -rw-------"
      ;;
esac
}

convertpath()
{
    ## figure out bootstrap device OF pathname if user did not supply it.
    if [ -z "$ofboot" ] ; then
	[ "$VERBOSE" = 1 ] && echo "$PRG: Finding OpenFirmware device path to \`$boot'..."
	ofboot="$($OFPATH $boot)"
	if [ $? != 0 ] ; then
	    echo 1>&2 "$PRG: Unable to find OpenFirmware path for boot=$boot"
	    echo 1>&2 "$PRG: Please add ofboot=<path> where <path> is the OpenFirmware path to $boot to $CONF"
	    local CONVERR=1
	fi
	[ "$DEBUG" = 1 ] && echo 1>&2 "$PRG: DEBUG: ofboot set to \`$ofboot'"
    fi

    ## figure out OF device path for macos/macosx if user supplied a unix device node.
    if [ -n "$bsd" ] ; then
	case "$bsd" in
	    /dev/*)
		[ "$VERBOSE" = 1 ] && echo "$PRG: Finding OpenFirmware device path to \`$bsd'..."
		local sbsd="$bsd"
		bsd="$($OFPATH $bsd)"
		if [ $? != 0 ] ; then
		    echo 1>&2 "$PRG: Unable to determine OpenFirmware path for bsd=$sbsd"
		    echo 1>&2 "$PRG: Try specifying the real OpenFirmware path for bsd=$sbsd in $CONF"
		    local CONVERR=1
		fi
		[ "$DEBUG" = 1 ] && echo 1>&2 "$PRG: DEBUG: bsd set to \`$bsd' from \`$sbsd'"
		;;
	    *)
		[ "$DEBUG" = 1 ] && echo 1>&2 "$PRG: DEBUG: bsd left alone: \`$bsd'"
		;;
	esac
    fi

    if [ -n "$macos" ] ; then
	case "$macos" in
	    /dev/*)
		[ "$VERBOSE" = 1 ] && echo "$PRG: Finding OpenFirmware device path to \`$macos'..."
		local smacos="$macos"
		macos="$($OFPATH $macos)"
		if [ $? != 0 ] ; then
		    echo 1>&2 "$PRG: Unable to determine OpenFirmware path for macos=$smacos"
		    echo 1>&2 "$PRG: Try specifying the real OpenFirmware path for macos=$smacos in $CONF"
		    local CONVERR=1
		fi
		[ "$DEBUG" = 1 ] && echo 1>&2 "$PRG: DEBUG: macos set to \`$macos' from \`$smacos'"
		;;
	    *)
		[ "$DEBUG" = 1 ] && echo 1>&2 "$PRG: DEBUG: macos left alone: \`$macos'"
		;;
	esac
    fi

    if [ -n "$macosx" ] ; then
	case "$macosx" in
	    /dev/*)
		[ "$VERBOSE" = 1 ] && echo "$PRG: Finding OpenFirmware device path to \`$macosx'..."
		local smacosx="$macosx"
		macosx="$($OFPATH $macosx)"
		if [ $? != 0 ] ; then
		    echo 1>&2 "$PRG: Unable to determine OpenFirmware path for macosx=$smacosx"
		    echo 1>&2 "$PRG: Try specifying the real OpenFirmware path for macosx=$smacosx in $CONF"
		    local CONVERR=1
		fi
		[ "$DEBUG" = 1 ] && echo 1>&2 "$PRG: DEBUG: macosx set to \`$macosx' from \`$smacosx'"
		;;
	    *)
		[ "$DEBUG" = 1 ] && echo 1>&2 "$PRG: DEBUG: macosx left alone: \`$macosx'"
		;;
	esac
    fi

    if [ -n "$darwin" ] ; then
	case "$darwin" in
	    /dev/*)
		[ "$VERBOSE" = 1 ] && echo "$PRG: Finding OpenFirmware device path to \`$darwin'..."
		local sdarwin="$darwin"
		darwin="$($OFPATH $darwin)"
		if [ $? != 0 ] ; then
		    echo 1>&2 "$PRG: Unable to determine OpenFirmware path for darwin=$sdarwin"
		    echo 1>&2 "$PRG: Try specifying the real OpenFirmware path for darwin=$sdarwin in $CONF"
		    local CONVERR=1
		fi
		[ "$DEBUG" = 1 ] && echo 1>&2 "$PRG: DEBUG: darwin set to \`$darwin' from \`$sdarwin'"
		;;
	    *)
		[ "$DEBUG" = 1 ] && echo 1>&2 "$PRG: DEBUG: darwin left alone: \`$darwin'"
		;;
	esac
    fi

    if [ "$CONVERR" = 1 ] ; then
	return 1
    else
	return 0
    fi
}

## make sure the hfsutils we need are installed and executable.
checkhfsutils()
{
    if (command -v hmount > /dev/null 2>&1) ; then
	[ -x `command -v hmount` ] || FAIL=1 ; else FAIL=1 ; fi
    if (command -v humount > /dev/null 2>&1) ; then
	[ -x `command -v humount` ] || FAIL=1 ; else FAIL=1 ; fi
    if (command -v hcopy > /dev/null 2>&1) ; then
	[ -x `command -v hcopy` ] || FAIL=1 ; else FAIL=1 ; fi
    if (command -v hattrib > /dev/null 2>&1) ; then
	[ -x `command -v hattrib` ] || FAIL=1 ; else FAIL=1 ; fi
    if (command -v hformat > /dev/null 2>&1) ; then
	[ -x `command -v hformat` ] || FAIL=1 ; else FAIL=1 ; fi

    if [ "$FAIL" = 1 ] ; then
	return 1
    else
	return 0
    fi
}

## This is gross, IBM CHRP OF needs a .note added to the yaboot
## binary, nobody knows whether this note will affect PowerMac OF or
## not (or could in the future). 
hack_yaboot()
{
    local YBDIR="${install%/*}"
    if [ -x "$YBDIR/addnote" ] ; then
	TMPYABOOT=`mktemp -q "$TMP/yaboot.XXXXXX"`
	if [ $? != 0 ] ; then
	    echo 1>&2 "$PRG: Could not create temporary file, aborting."
	    return 1
	else
	    if (cat "$install" > "$TMPYABOOT" 2> /dev/null) ; then
		install="$TMPYABOOT"
	    else
		echo 1>&2 "$PRG: Could not create temporary file, aborting."
		return 1
	    fi
	fi
	[ "$DEBUG" = 1 ] && echo "$PRG: Embedding CHRP note section in temp yaboot..."
	"$YBDIR/addnote" "$install" > /dev/null 2>&1
	if [ $? != 0 ] ; then
	    echo 1>&2 "$PRG: Could not install note section required by your architecture"
	    return 1
	fi
    else
	echo 1>&2 "$PRG: Your architecture requires $YBDIR/addnote which cannot be found"
	return 1
    fi
    return 0
}

## install using userspace utilities rather then kernel filesytem
## support.  hfsutils only, mtools not supported.
util_install()
{
    ## catch signals, and humount, cleanup done by trap 0.
    trap "humount $boot ; exit 129" 1
    trap "echo 1>&2 $SIGINT ; humount $boot ; exit 130" 2
    trap "humount $boot ; exit 131" 3
    trap "humount $boot ; exit 143" 15

    ## filenames on bootstrap partition. ofboot hard codes yaboot.
    local BTFILE=yaboot
    local CFFILE=yaboot.conf

    ## if there is a magicboot script to install we will give it the
    ## hfstype (should be "tbxi") and give yaboot type "boot".
    if [ -n "$magicboot" ] ; then
	local BTTYPE=boot
    else
	local BTTYPE="$hfstype"
    fi

    if [ -n "$magicboot" ] ; then
	local WRAP="${magicboot##*/}"
    fi

    ## set verbose messages here so they don't show temporary file paths
    local INSTALLFIRST="$PRG: Installing first stage bootstrap $magicboot onto $boot..."
    local INSTALLPRIMARY="$PRG: Installing primary bootstrap $install onto $boot..."

    ## repoint magicboot as the real first stage loader if using the
    ## modern automatic generating ofboot.b.
    if [ -n "$FIRST" ] ; then	
	magicboot="$FIRST"
	[ "$DEBUG" = 1 ] && echo 1>&2 "$PRG: DEBUG: set magicboot to $FIRST"
    fi

    ## gross hack, add note section for IBM CHRP
    if [ "$ADDNOTE" = yes ] ; then
	hack_yaboot || return 1
    fi

    if [ "$fstype" = hfs ] ; then
	if [ "$protect" = yes ] ; then
	    local LOCK="+l"
	fi
	
	if [ "$hide" = yes ] ; then
	    local INVISIBLE="+i"
	fi

	## make sure the device is not mounted as a filesystem before
	## we start mucking with it directly.
	mount | grep "^$boot\>" > /dev/null
	if [ $? = 0 ] ; then
	    echo 1>&2 "$PRG: $boot appears to be mounted! aborting."
	    return 1
	fi

	## hmount is really more of a way to make sure we have a valid HFS
	## filesystem before proceding, and hcopy requires it...
	hmount "$boot" > /dev/null
	if [ $? != 0 ] ; then
	    echo 1>&2 "$PRG: $boot appears to have never had a bootstrap installed, please run mkofboot"
	    return 1
	fi

	## must be explicit with target filename to avoid hfsutils
	## braindamage ("_" -> " " filename mangling) also avoid
	## ambiguity in the bootstrap partition.
	if [ -n "$magicboot" ] ; then
	    [ "$VERBOSE" = 1 ] && echo "$INSTALLFIRST"
	    hcopy -r "$magicboot" :ofboot.b
	    if [ $? != 0 ] ; then
	       echo 1>&2 "$PRG: An error occured while writing to $boot"
	       return 1
	    fi
	fi

	[ "$VERBOSE" = 1 ] && echo "$INSTALLPRIMARY"
	hcopy -r "$install" :"$BTFILE"
	if [ $? != 0 ] ; then
	    echo 1>&2 "$PRG: An error occured while writing to $boot"
	    return 1
	fi

	[ "$VERBOSE" = 1 ] && echo "$PRG: Installing $bootconf onto $boot..."
	hcopy -r "$bootconf" :"$CFFILE"
	if [ $? != 0 ] ; then
	    echo 1>&2 "$PRG: An error occured while writing to $boot"
	    return 1
	fi

	if [ -n "$BSDLOADER" ] ; then
	    [ "$VERBOSE" = 1 ] && echo "$PRG: Installing $BSDLOADER onto $boot..."
	    hcopy -r "$BSDLOADER" :ofwboot
	    if [ $? != 0 ] ; then
		echo 1>&2 "$PRG: An error occured while writing to $boot"
		return 1
	    fi
	fi

	## set all file's attributes, if a magicboot script exists it
	## gets the configured hfstype instead of yaboot (should be
	## "tbxi") so it gets booted by OF.
	if [ -n "$magicboot" ] ; then
	    [ "$VERBOSE" = 1 ] && echo "$PRG: Setting attributes on $WRAP..."
	    hattrib -t "$hfstype" -c "$hfscreator" $INVISIBLE $LOCK :ofboot.b
	    if [ $? != 0 ] ; then
		echo 1>&2 "$PRG: Warning: error setting attributes on $WRAP"
		echo 1>&2 "$PRG: This is probably bad but we'll ignore it."
	    fi
	fi

	[ "$VERBOSE" = 1 ] && echo "$PRG: Setting attributes on $BTFILE..."
	hattrib -t "$BTTYPE" -c "$hfscreator" $INVISIBLE $LOCK :"$BTFILE"
	if [ $? != 0 ] ; then
	    echo 1>&2 "$PRG: Warning: error setting attributes on $BTFILE"
	    echo 1>&2 "$PRG: This is probably bad but we'll ignore it"
	fi

	[ "$VERBOSE" = 1 ] && echo "$PRG: Setting attributes on $CFFILE..."
	hattrib -t "conf" -c "$hfscreator" $INVISIBLE $LOCK :"$CFFILE"
	if [ $? != 0 ] ; then
	    echo 1>&2 "$PRG: Warning: error setting attributes on $CFFILE"
	    echo 1>&2 "$PRG: This is probably unimportant so we'll ignore it"
	fi

	if [ -n "$BSDLOADER" ] ; then
	    [ "$VERBOSE" = 1 ] && echo "$PRG: Setting attributes on ofwboot..."
	    hattrib -t "bsdb" -c "$hfscreator" $INVISIBLE $LOCK :ofwboot
	    if [ $? != 0 ] ; then
		echo 1>&2 "$PRG: Warning: error setting attributes on ofwboot"
		echo 1>&2 "$PRG: This is probably unimportant so we'll ignore it"
	    fi
	fi

	## bless the root directory so OF will find the boot file
	if [ "$bless" = yes ] ; then
	    [ "$VERBOSE" = 1 ] && echo "$PRG: Blessing $boot with Holy Penguin Pee..."
	    hattrib -b :
	    if [ $? != 0 ] ; then
		echo 1>&2 "$PRG: Warning: error blessing $boot"
		echo 1>&2 "$PRG: This is probably bad but we'll ignore it"
	    fi
	fi

	## clean up the ~/.hcwd file hmount creates
	humount "$boot" > /dev/null
	sync ; sync

	## use explicit filename if we don't bless.
	if [ "$bless" = yes ] ; then
	    local OFFILE='\\:tbxi'
	else
	    if [ -n "$magicboot" ] ; then
		local OFFILE=ofboot.b
	    else
		local OFFILE="$BTFILE"
	    fi
	fi

	## update the boot-device variable in OF nvram.
	if [ "$nonvram" = 0 ] ; then
	    [ "$VERBOSE" = 1 ] && echo "$PRG: Updating OpenFirmware boot-device variable in nvram..."
	    [ "$DEBUG" = 1 ] && echo 1>&2 "$PRG: DEBUG: boot-device=${ofboot},${OFFILE}"
	    nvsetenv boot-device "${ofboot},${OFFILE}"
	    if [ $? != 0 ] ; then
		echo 1>&2 "$PRG: An error occured while updating nvram, we'll ignore it"
	    fi
	fi

    else
	echo 1>&2 "$PRG: mtools support is not implemented"
	echo 1>&2 "$PRG: Use --mount or add \`usemount' to $CONF"
	return 1
    fi

    return 0
}

## used by mnt_install so mntpoint= can be supported in a cleaner way.
mnt()
{
    ## we can even create bootstrap filesystem images directly if you
    ## ever wanted too.
    if [ -f "$boot" ] ; then
	local loop=",loop"
    fi

    if [ -e "$TMP/bootstrap.$$" ] ; then
	echo 1>&2 "$PRG: $TMP/bootstrap.$$ exists, aborting."
	return 1
    fi

    mkdir -m 700 "$TMP/bootstrap.$$"
    if [ $? != 0 ] ; then
	echo 1>&2 "$PRG: Could not create mountpoint directory, aborting."
	return 1
    fi

    mount | grep "^$boot\>" > /dev/null
    if [ $? = 0 ] ; then
	echo 1>&2 "$PRG: $boot appears to be mounted! aborting."
	return 1
    fi

    [ "$VERBOSE" = 1 ] && echo "$PRG: Mounting $boot..."
    mount -t "$fstype" -o rw,umask=077$loop "$boot" "$TMP/bootstrap.$$"
    if [ $? != 0 ] ; then
	echo 1>&2 "$PRG: An error occured mounting $boot"
	return 1
    fi

    ## catch signals, set here to avoid umounting something we did not
    ## mount. cleanup done by trap 0.
    trap "umount $boot ; exit 129" 1
    trap "echo 1>&2 $SIGINT ; umount $boot ; exit 130" 2
    trap "umount $boot ; exit 131" 3
    trap "umount $boot ; exit 143" 15

    TARGET="$TMP/bootstrap.$$"
    return 0
}

## umnt funtion which checks whether we mounted anything or not, for
## mntpoint= this makes the code below cleaner IMO.
umnt()
{
    if [ -z "$mntpoint" ] ; then
    	[ "$1" = failure ] && echo 1>&2 "$PRG: Attempting to umount $boot..."
	umount "$2"
	if [ $? != 0 ] ; then
	    echo 1>&2 "$PRG: umount of $boot failed!"
	    return 1
	else
	    [ "$1" = failure ] && echo 1>&2 "$PRG: umount successfull"
	    return 0
	fi
    else
	return 0
    fi
}

## Use kernel filesytem drivers to mount the bootstrap partition like
## any other filesystem and copy the files there with standard un*x
## utilities.
mnt_install()
{
    local BTFILE=yaboot
  
    ## msdosfs is broken, yaboot may not support this filename.
    if [ "$fstype" = msdos ] ; then
	local CFFILE=yaboot.cnf
    else
	local CFFILE=yaboot.conf
    fi

    if [ -n "$magicboot" ] ; then
	local WRAP="${magicboot##*/}"
    fi

    ## set verbose messages here so they don't show temporary file paths
    local INSTALLFIRST="$PRG: Installing first stage bootstrap $magicboot onto $boot..."
    local INSTALLPRIMARY="$PRG: Installing primary bootstrap $install onto $boot..."

    ## repoint magicboot as the real first stage loader if using the
    ## modern automatic generating ofboot.b.
    if [ -n "$FIRST" ] ; then
	magicboot="$FIRST"
	[ "$DEBUG" = 1 ] && echo 1>&2 "$PRG: DEBUG: set magicboot to $FIRST"
    fi

    ## gross hack, add note section for IBM CHRP
    if [ "$ADDNOTE" = yes ] ; then
	hack_yaboot || return 1
    fi

    ## call mnt() function to take care of mounting filesystem if needed
    if [ -z "$mntpoint" ] ; then
	mnt || return 1
    else
	TARGET="$mntpoint"
    fi

    ## this is probably insecure on modern filesystems, but i think
    ## safe on crippled hfs/dosfs. user should ensure mntpoint= is safe.
    if [ -n "$magicboot" ] ; then
	[ "$VERBOSE" = 1 ] && echo "$INSTALLFIRST"
	cp -f "$magicboot" "$TARGET/ofboot.b"
	if [ $? != 0 ] ; then
	    echo 1>&2 "$PRG: An error occured while writing to $boot"
	    umnt failure "$TARGET"
	    return 1
	fi
    fi

    [ "$VERBOSE" = 1 ] && echo "$INSTALLPRIMARY"
    cp -f "$install" "$TARGET/$BTFILE"
    if [ $? != 0 ] ; then
	echo 1>&2 "$PRG: An error occured while writing to $boot"
	umnt failure "$TARGET"
	return 1
    fi

    [ "$VERBOSE" = 1 ] && echo "$PRG: Installing $bootconf onto $boot..."
    cp -f "$bootconf" "$TARGET/$CFFILE"
    if [ $? != 0 ] ; then
	echo 1>&2 "$PRG: An error occured while writing to $boot"
	umnt failure "$TARGET"
	return 1
    fi

    if [ -n "$BSDLOADER" ] ; then
	[ "$VERBOSE" = 1 ] && echo "$PRG: Installing $BSDLOADER onto $boot..."
	cp -f "$BSDLOADER" "$TARGET/ofwboot"
	if [ $? != 0 ] ; then
	    echo 1>&2 "$PRG: An error occured while writing to $boot"
	    umnt failure "$TARGET"
	    return 1
	fi
    fi

    if [ "$protect" = yes ] ; then
        [ "$VERBOSE" = 1 ] && echo "$PRG: Setting read-only attributes..."
	chmod a-w "$TARGET/$BTFILE"
	chmod a-w "$TARGET/$CFFILE"
	if [ -n "$magicboot" ] ; then
	    chmod a-w "$TARGET/ofboot.b"
	fi
	if [ -n "$BSDLOADER" ] ; then
	    chmod a-w "$TARGET/ofwboot"
	fi
    fi

    sync ; sync
    umnt success "$TARGET" || return 1

    ## make variable with a \ to avoid shell fsckage.  ugly ugly ugly.
    local BS='\'
    if [ -n "$magicboot" ] ; then
	[ -n "$OFDIR" ] && OFDIR="${BS}${OFDIR}${BS}"
	local OFFILE="${OFDIR}ofboot.b"
    else
	[ -n "$OFDIR" ] && OFDIR="${BS}${OFDIR}${BS}"
	local OFFILE="${OFDIR}${BTFILE}"
    fi

    ## update the boot-device variable in OF nvram.
    if [ "$nonvram" = 0 ] ; then
	[ "$VERBOSE" = 1 ] && echo "$PRG: Updating OpenFirmware boot-device variable in nvram..."
	[ "$DEBUG" = 1 ] && echo 1>&2 "$PRG: DEBUG: boot-device=${ofboot},${OFFILE}"
	nvsetenv boot-device "${ofboot},${OFFILE}"
	if [ $? != 0 ] ; then
	    echo 1>&2 "$PRG: An error occured while updating nvram, we'll ignore it"
	fi
    else
	echo 1>&2 "$PRG: Warning: You must manually configure OpenFirmware to boot."
    fi

    return 0
}

## raw installation, for IBM RS/6000 hardware, yaboot is dded to the
## bootstrap partition. 
raw_install()
{
    ## make sure the device is not mounted as a filesystem before
    ## we start mucking with it directly.
    mount | grep "^$boot\>" > /dev/null
    if [ $? = 0 ] ; then
	echo 1>&2 "$PRG: $boot appears to be mounted! aborting."
	return 1
    fi

    ## set verbosity message before munging the yaboot pathname
    local INSTALLPRIMARY="$PRG: Installing primary bootstrap $install onto $boot..."

    ## gross hack, add note section for IBM CHRP
    if [ "$ADDNOTE" = yes ] ; then
	hack_yaboot || return 1
    fi

    [ "$VERBOSE" = 1 ] && echo "$INSTALLPRIMARY"
    dd if=/dev/zero of="$boot" bs=512 count=1600 > /dev/null 2>&1
    dd if="$install" of="$boot" bs=512 > /dev/null 2>&1
    if [ $? != 0 ] ; then
	echo 1>&2 "$PRG: Installation failed."
	return 1
    fi
    sync ; sync
    [ "$VERBOSE" = 1 ] && echo "$PRG: Installation successful"
}

## make sure the first stage ofboot generator is compatible.
checkfirststage()
{
    grep -q "^#%ybinscript-" "$magicboot" 2> /dev/null
    if [ "$?" = 0 ] ; then
	local magic=`grep "^#%ybinscript-" "$magicboot"`
	local ver="${magic##*-}"
	if [ "$ver" = "1.1" ] ; then
	    FIRSTSTG=compat
	    return 0
	else
	    echo 1>&2 "$PRG: Incompatible version of first stage loader $magicboot.  aborting..."
	    return 1
        fi
    else
	FIRSTSTG=old
	return 0
    fi
}

## build the first stage loader.
mkfirststage()
{
    ## must have 7 backslashes to == \\ printf + shell = bizarre... or,
    ## make special variable to contain a \ (need \\ to make \) to work
    ## around echo -e -n brokeness.
    local BS='\\'
    local OS=1

    ## deal with mntpoint=
    [ -n "$OFDIR" ] && local OFDIR="${BS}${OFDIR}${BS}"

    ## some misguided people insist on installing OSX on
    ## HorribleFileSystem+ instead of UFS, as a result MacOS deblesses
    ## OSX, making it unbootable. if apple localizes the filesystem hierarchy again screw it.
    [ "$brokenosx" = yes ] && local OSXBOOT="${BS}System${BS}Library${BS}CoreServices${BS}BootX"
    [ "$brokenosx" = no ] && local OSXBOOT="${BS}${BS}:tbxi"

    ## assign variables for configured menu options.
    [ "$usemount" = no -a "$bless" = yes ] && local YB="yaboot GNU l $ofboot ,${BS}${BS}yaboot"
    [ "$usemount" = yes -o "$bless" = no ] && local YB="yaboot GNU l $ofboot ,${OFDIR}yaboot"
    [ -n "$bsd" ] && OS="$(($OS + 1))" && local BSD="ybsd BSD b $ofboot ,${BS}${BS}ofwboot/$bsd"
    [ -n "$macos" ] && OS="$(($OS + 1))" && local MAC="macos MacOS m $macos ,${BS}${BS}:tbxi"
    [ -n "$macosx" ] && OS="$(($OS + 1))" && local MX="macosx MacOSX x $macosx ,${OSXBOOT}"
    [ -n "$darwin" ] && OS="$(($OS + 1))" && local DW="darwin Darwin d $darwin ,${BS}${BS}:tbxi"
    [ "$cdrom" = yes ] && OS="$(($OS + 1))" && local CD="cd CDROM c cd: ,${BS}${BS}:tbxi"
    [ "$network" = yes ] && OS="$(($OS + 1))" && local NET="net Network n enet: 0"
    [ "$of" = yes ] && OS="$(($OS + 1))" && local OF="of OpenFirmware o quit now"
    [ "$DEBUG" = 1 ] && echo 1>&2 "$PRG: DEBUG: OS=$OS"

    ## call ofboot,
    ## Usage: OS-count defaultos timeout fgc bgc osname oslabel oskey osdev osfile ...
    [ "$DEBUG" = 1 ] && $PRINTF 1>&2 "$PRG: DEBUG: /bin/sh $magicboot $OS $defaultos $delay $fbc $bgc $YB $BSD $MAC $MX $DW $CD $NET $OF\n"
    FIRST="$(/bin/sh "$magicboot" "$OS" "$defaultos" "$delay" $fgc $bgc ${YB} ${BSD} ${MAC} ${MX} ${DW} ${CD} ${NET} ${OF})" || return 1

    return 0
}

## mkofboot function.
mkoffs()
{
    mount | grep "^$boot\>" > /dev/null
    if [ $? = 0 ] ; then
	echo 1>&2 "$PRG: $boot appears to be mounted! aborting."
        return 1
    fi

    case "$fstype" in
	hfs)
	    [ "$VERBOSE" = 1 ] && echo "$PRG: Creating HFS filesystem on $boot..."
	    if (command -v dd > /dev/null 2>&1) ; then
		dd if=/dev/zero of="$boot" bs=512 count=1600 > /dev/null 2>&1
	    fi
	    hformat -l bootstrap "$boot" > /dev/null
	    if [ $? != 0 ] ; then
		echo 1>&2 "$PRG: HFS filesystem creation failed!"
		return 1
	    fi
	    humount "$boot" ## otherwise we might get confused.
	    return 0
	    ;;
	msdos)
	    if (command -v mkdosfs > /dev/null 2>&1) ; then
		[ -x `command -v mkdosfs` ] || FAIL=1 ; else FAIL=1 ; fi
		if [ "$FAIL" = 1 ] ; then
		    echo 1>&2 "$PRG: mkdosfs is not installed or cannot be found"
		    return 1
		fi

	    [ "$VERBOSE" = 1 ] && echo "$PRG: Creating DOS filesystem on $boot..."
            if (command -v dd > /dev/null 2>&1) ; then
                dd if=/dev/zero of="$boot" bs=512 count=1600 > /dev/null 2>&1
            fi  
	    mkdosfs -n bootstrap "$boot" > /dev/null
            if [ $? != 0 ] ; then
		echo 1>&2 "$PRG: DOS filesystem creation failed!"
		return 1
	    fi
	    return 0
	    ;;
    esac
}

confirm()
{
    if [ "$FORCE" = yes ] ; then
	return 0
    else
	echo 1>&2
	[ "$fstype" = raw ] && $PRINTF 1>&2 "$PRG: Overwrite contents of $boot with $install? [y/N] "
	[ "$fstype" != raw ] && $PRINTF 1>&2 "$PRG: Create $fstype filesystem on $boot? [y/N] "
	read ans
	case "$ans" in
	    y|Y)
		return 0
		;;
	    *)
		echo 1>&2 "$PRG: Abort."
		return 2
		;;
	esac
    fi
}

## for fstype=raw check if an ELF binary has already been dded.
luserck()
{
    if [ "$(dd if="$boot" bs=1 skip=1 count=3 2>/dev/null)" = ELF ] ; then
	return 0
    else
	echo 1>&2 "$PRG: This partition has never had yaboot installed before, please run mkofboot"
	return 1
    fi
}

mkconf()
{
## defaults for this are defined at the beginning of the script with
## other variables.

echo \
"## yaboot configuration file generated by ybin $VERSION

device=$device
timeout=$timeout

image=$image
	label=$label
	partition=$partition
	root=$root
	read-only
" > "$TMPCONF" || return 1

[ "$DEBUG" = 1 ] && $PRINTF 1>&2 "\nDEBUG: autoconf:\n----\n" && cat "$TMPCONF" 1>&2 && echo 1>&2 "----"
return 0
}

## take out the trash.
cleanup()
{
    if [ -n "$TMPCONF" ] ; then rm -f "$TMPCONF" ; fi
    if [ -n "$FIRST" ] ; then rm -f "$FIRST" ; fi
    if [ -n "$TMPYABOOT" ] ; then rm -f "$TMPYABOOT" ; fi
    if [ -d "$TMP/bootstrap.$$" -a "$usemount" = yes ] ; then rmdir "$TMP/bootstrap.$$" ; fi
    return 0
}

##########
## Main ##
##########

## absurdly bloated case statement to parse command line options.
if [ $# != 0 ] ; then
    while true ; do
	case "$1" in 
	    -V|--version)
		version
		exit 0
		;;
	    -h|--help)
		usage
		exit 0
		;;
	    --debug)
		DEBUG=1
		ARGS="$ARGS $1"
		shift
		;;
	    -v|--verbose)
		VERBOSE=1
		ARGS="$ARGS $1"
		shift
		;;
	    -f|--force)
		FORCE=yes
		ARGS="$ARGS $1"
		shift
		;;
	    -b|--boot)
		if [ -n "$2" ] ; then
		    if [ "$boot" = "unconfigured" ]; then
			boot="$2"
		    else
			boot="$boot $2"
		    fi
		    ARGBT=1
		    shift 2
		else
		    echo 1>&2 "$PRG: option requires an argument $1"
		    echo 1>&2 "Try \`$PRG --help' for more information."
		    exit 1
		fi
		;;
	    -o|--ofboot)
		if [ -n "$2" ] ; then
		    ofboot="$2"
		    ARGOB=1
		    ARGS="$ARGS $1 $2"
		    shift 2
		else
		    echo 1>&2 "$PRG: option requires an argument $1"
		    echo 1>&2 "Try \`$PRG --help' for more information."
		    exit 1
		fi
		;;
	    -i|--install)
		if [ -n "$2" ] ; then
		    install="$2"
		    ARGBF=1
		    ARGS="$ARGS $1 $2"
		    shift 2
		else
		    echo 1>&2 "$PRG: option requires an argument $1"
		    echo 1>&2 "Try \`$PRG --help' for more information."
		    exit 1
		fi
		;;
	    -C|--config)
		if [ -n "$2" ] ; then
		    CONF="$2"
		    bootconf="$2"
		    ERR=" Error in $CONF:"
		    ARGS="$ARGS $1 $2"
		    shift 2
		else
		    echo 1>&2 "$PRG: option requires an argument $1"
		    echo 1>&2 "Try \`$PRG --help' for more information."
		    exit 1
		fi
		;;
	    -m|--magicboot)
		if [ -n "$2" ] ; then
		    magicboot="$2"
		    ARGWP=1
		    ARGS="$ARGS $1 $2"
		    shift 2
		else
		    echo 1>&2 "$PRG: option requires an argument $1"
		    echo 1>&2 "Try \`$PRG --help' for more information."
		    exit 1
		fi
		;;
	    --filesystem)
		if [ -n "$2" ] ; then
		    fstype="$2"
		    ARGFS=1
		    ARGS="$ARGS $1 $2"
		    shift 2
		else
		    echo 1>&2 "$PRG: option requires an argument $1"
		    echo 1>&2 "Try \`$PRG --help' for more information."
		    exit 1
		fi
		;;
	    --nobless)
		bless=no
		ARGBS=1
		ARGS="$ARGS $1"
		shift
		;;
	    -M|--mount)
		usemount=yes
		ARGMT=1
		ARGS="$ARGS $1"
		shift
		;;
	    --protect)
		protect=yes
		ARGPT=1
		ARGS="$ARGS $1"
		shift
		;;
	    --hide)
		hide=yes
		ARGHD=1
		ARGS="$ARGS $1"
		shift
		;;
	    --nonvram)
		nonvram=1
		ARGNV=1
		ARGS="$ARGS $1"
		shift
		;;
	    --device)
		if [ -n "$2" ] ; then
		    device="$2"
		    bootconf=auto
		    echo 1>&2 "$PRG: WARNING: Deprecated option --device"
		    ARGS="$ARGS $1 $2"
		    shift 2
		else
		    echo 1>&2 "$PRG: option requires an argument $1"
		    echo 1>&2 "Try \`$PRG --help' for more information."
		    exit 1
		fi
		;;
	    --timeout)
		if [ -n "$2" ] ; then
		    timeout="$2"
		    bootconf=auto
		    echo 1>&2 "$PRG: WARNING: Deprecated option --device"
		    ARGS="$ARGS $1 $2"
		    shift 2
		else
		    echo 1>&2 "$PRG: option requires an argument $1"
		    echo 1>&2 "Try \`$PRG --help' for more information."
		    exit 1
		fi
		;;
	    --image)
		if [ -n "$2" ] ; then
		    image="$2"
		    bootconf=auto
		    echo 1>&2 "$PRG: WARNING: Deprecated option --device"
		    ARGS="$ARGS $1 $2"
		    shift 2
		else
		    echo 1>&2 "$PRG: option requires an argument $1"
		    echo 1>&2 "Try \`$PRG --help' for more information."
		    exit 1
		fi
		;;
	    --label)
		if [ -n "$2" ] ; then
		    label="$2"
		    bootconf=auto
		    echo 1>&2 "$PRG: WARNING: Deprecated option --device"
		    ARGS="$ARGS $1 $2"
		    shift 2
		else
		    echo 1>&2 "$PRG: option requires an argument $1"
		    echo 1>&2 "Try \`$PRG --help' for more information."
		    exit 1
		fi
		;;
	    --partition)
		if [ -n "$2" ] ; then
		    partition="$2"
		    bootconf=auto
		    echo 1>&2 "$PRG: WARNING: Deprecated option --device"
		    ARGS="$ARGS $1 $2"
		    shift 2
		else
		    echo 1>&2 "$PRG: option requires an argument $1"
		    echo 1>&2 "Try \`$PRG --help' for more information."
		    exit 1
		fi
		;;
	    --root)
		if [ -n "$2" ] ; then
		    root="$2"
		    bootconf=auto
		    echo 1>&2 "$PRG: WARNING: Deprecated option --device"
		    ARGS="$ARGS $1 $2"
		    shift 2
		else
		    echo 1>&2 "$PRG: option requires an argument $1"
		    echo 1>&2 "Try \`$PRG --help' for more information."
		    exit 1
		fi
		;;
	    "")
		break
		;;
	    *)
		echo 1>&2 "$PRG: unrecognized option \`$1'"
		echo 1>&2 "Try \`$PRG --help' for more information."
		exit 1
		;;
	esac
    done
fi

## check that specified config file exists, unless its /dev/null in
## which case we assume all options are done on the command line.
if [ "$CONF" = /dev/null ] ; then
    true
else
    confexist || exit 1
fi

## if there is no config file use the automatic generation to make a
## generic yaboot.conf. do this before the confcheck to avoid wierd errors.
if [ "$bootconf" = /dev/null ] ; then
    if (command -v yabootconfig > /dev/null 2>&1) ; then
	echo 1>&2 "$PRG: Warning: no /etc/yaboot.conf, running yabootconfig to make one"
	yabootconfig --noinstall --quiet
	if [ $? != 0 ] ; then
	    echo 1>&2 "$PRG: yabootconfig failed, please supply a valid /etc/yaboot.conf"
	    echo 1>&2 "$PRG: You may also use $PRG's --boot, --image, --partition, and --device switches"
	    echo 1>&2 "$PRG: These switches will cause $PRG to generate a basic yaboot.conf on the fly"
	    exit 1
	else
	    CONF=/etc/yaboot.conf
	    bootconf=$CONF
	    ERR=" Error in $CONF:"
	    confexist || exit 1
	fi
    fi
fi

## Checks if each option was defined on the command line, and if so
## don't read it from the configuration file. this avoids
## configuration options from being set null, as well as command line
## options from being clobbered.
[ "$ARGBT" != 1 -a $(parseconf ck boot) = 0 ] && boot=`parseconf str boot`
[ "$ARGOB" != 1 -a $(parseconf ck ofboot) = 0 ] && ofboot=`parseconf str ofboot`
[ "$ARGBF" != 1 -a $(parseconf ck install) = 0 ] && install=`parseconf str install`
[ "$ARGWP" != 1 -a $(parseconf ck magicboot) = 0 ] && magicboot=`parseconf str magicboot`
[ "$ARGMT" != 1 -a $(parseconf flag usemount) = 0 ] && usemount=yes
[ "$ARGFS" != 1 -a $(parseconf ck fstype) = 0 ] && fstype=`parseconf str fstype`
[ "$ARGBS" != 1 -a $(parseconf flag nobless) = 0 ] && bless=no
[ "$ARGPT" != 1 -a $(parseconf flag protect) = 0 ] && protect=yes
[ "$ARGHD" != 1 -a $(parseconf flag hide) = 0 ] && hide=yes
[ "$ARGNV" != 1 -a $(parseconf flag nonvram) = 0 ] && nonvram=1
[ $(parseconf ck hfstype) = 0 ] && hfstype=`parseconf str hfstype`
[ $(parseconf ck hfscreator) = 0 ] && hfscreator=`parseconf str hfscreator`
[ $(parseconf ck mntpoint) = 0 ] && mntpoint=`parseconf str mntpoint`
[ $(parseconf ck delay) = 0 ] && delay=`parseconf str delay`
[ $(parseconf ck timeout) = 0 ] && timeout=`parseconf str timeout`
[ $(parseconf ck bsd) = 0 ] && bsd=`parseconf str bsd`
[ $(parseconf ck macos) = 0 ] && macos=`parseconf str macos`
[ $(parseconf ck macosx) = 0 ] && macosx=`parseconf str macosx`
[ $(parseconf ck darwin) = 0 ] && darwin=`parseconf str darwin`
[ $(parseconf ck defaultos) = 0 ] && defaultos=`parseconf str defaultos`
[ $(parseconf ck fgcolor) = 0 ] && fgcolor=`parseconf str fgcolor`
[ $(parseconf ck bgcolor) = 0 ] && bgcolor=`parseconf str bgcolor`
[ $(parseconf ck icon) = 0 ] && export YBINOFICON=`parseconf str icon`
[ $(parseconf flag enablecdboot) = 0 ] && cdrom=yes
[ $(parseconf flag enablenetboot) = 0 ] && network=yes
[ $(parseconf flag enableofboot) = 0 ] && of=yes
[ $(parseconf flag brokenosx) = 0 ] && brokenosx=yes

bootparts=0
for i in $boot; do
    bootparts=$(($bootparts + 1))
done
if [ "$bootparts" -gt 1 ]; then
    [ "$VERBOSE" = 1 ] && echo "$PRG: Iterating through list of boot partitions..."
    rc=0
    for i in $boot; do
        [ "$VERBOSE" = 1 ] && echo "$ABSPRG $ARGS -b $i"
        $ABSPRG $ARGS -b $i || rc=$?
    done
    exit $rc
fi

## ffs!! rtfm! foad!
if [ "$boot" = unconfigured ] ; then
    echo 1>&2 "$PRG: You must specify the device for the bootstrap partition. (ie: boot=/dev/hdaX)"
    echo 1>&2 "$PRG: Try \`$PRG --help' for more information."
    exit 1
fi

## if there is still no config file use the automatic generation to make a
## generic yaboot.conf. do this before the confcheck to avoid wierd errors.
if [ "$bootconf" = /dev/null ] ; then
    echo 1>&2 "$PRG: Warning: no yaboot.conf, using generic configuration."
    bootconf=auto
fi

## mntpoint is incompatible with mkofboot.
if [ "$PRG" = mkofboot -a -n "$mntpoint" ] ; then
    echo 1>&2 "$PRG: Cannot be used with \`mntpoint='"
    exit 1
fi

## validate configuration for sanity.
checkconf || exit 1

## check that we can use ofpath, its only needed for magicboot script
## building and nvram updates.
if [ -n "$magicboot" -o "$nonvram" = 0 ] ; then
    if [ -z "$ofboot" -o -n "$macos" -o -n "$macosx" -o -n "$darwin" ] ; then
	if (command -v ofpath > /dev/null 2>&1) ; then
	    [ -x `command -v ofpath` ]
	    if [ $? != 0 ] ; then
		echo 1>&2 "$PRG: ofpath could not be found, aborting."
		exit 1
	    fi
	else
	    echo 1>&2 "$PRG: ofpath could not be found, aborting."
	    exit 1
	fi
    fi
fi

## if password is set in yaboot.conf make sure permissions on that
## file are safe, warn if not.
if (grep -q '^[[:space:]]*password[[:space:]]*=' "$bootconf" > /dev/null 2>&1) ; then
    permcheck
fi

## check if we are root if needed.
if [ "$usemount" = yes -a -z "$mntpoint" ] ; then
    if [ `id -u` != 0 ] ; then
	echo 1>&2 "$PRG: \`usemount' requires root privileges, go away."
	exit 1
    fi
fi

if [ "$fstype" = hfs ] ; then
    checkhfsutils
    if [ $? != 0 ] ; then
	echo 1>&2 "$PRG: hfsutils is not installed or cannot be found"
	echo 1>&2 "$PRG: Try --mount if `uname -sr` supports HFS"
	exit 1
    fi
fi

## convert unix device nodes to OpenFirmware pathnames
if [ -n "$magicboot" -o "$nonvram" = 0 ] ; then
    convertpath || exit 1
fi

## yaboot.conf autogeneration. MUST have secure mktemp to
## avoid race conditions. Debian's mktemp qualifies.
if [ "$bootconf" = auto ] ; then
    TMPCONF=`mktemp -q "$TMP/$PRG.XXXXXX"`
    if [ $? != 0 ] ; then
	echo 1>&2 "$PRG: Could not create temporary file, aborting."
	exit 1
    fi

    mkconf
    if [ $? != 0 ] ; then
	echo 1>&2 "$PRG: An error occured generating yaboot.conf, aborting."
	exit 1
    fi

    bootconf="$TMPCONF"
fi

if [ -n "$magicboot" ] ; then
    checkfirststage || exit 1
    if [ "$FIRSTSTG" = compat ] ; then
	mkfirststage
	if [ $? != 0 ] ; then
	    echo 1>&2 "$PRG: An error occured while building first stage loader.  aborting..."
	    exit 1
	fi
    fi
fi

case "$PRG" in
    ybin)
	case "$usemount" in
	    no)
		if [ "$fstype" = raw ] ; then
		    luserck || exit 1
		    raw_install || exit 1
		else
		    util_install || exit 1
		fi
		exit 0
		;;
	    yes)
		mnt_install || exit 1
		exit 0
		;;
	esac
	;;
    mkofboot)
	case "$usemount" in
	    no)
		## its not nice to erase the partition and then bail!
		if [ "$fstype" = msdos ] ; then
		    echo 1>&2 "$PRG: mtools support is not implemented"
		    echo 1>&2 "$PRG: Use --mount or add \`usemount' to $CONF"
		    exit 1
		fi
		confirm || exit 2
		if [ "$fstype" = raw ] ; then
		    raw_install || exit 1
		else
		    mkoffs || exit 1
		    util_install || exit 1
		fi
		[ "$VERBOSE" = 1 ] && echo "$PRG: Installation complete."
		exit 0
		;;
	    yes)
		confirm || exit 2
		mkoffs || exit 1
		mnt_install || exit 1
		[ "$VERBOSE" = 1 ] && echo "$PRG: Installation complete."
		exit 0
		;;
	esac
	;;
esac

exit 0