doc/examples/yaboot.conf.multi-boot

## Example yaboot.conf for ybin and yaboot >= 0.6
## see man yaboot.conf for more details.

## This example shows how to multi boot GNU/Linux, MacOS, MacOSX, and
## Darwin with SCSI disks.  This example also creates menu items for
## booting from the CDROM, the Network and into an OpenFirmware
## prompt.

## Change to your bootstrap partition ie: /dev/sda2
boot=unconfigured

## device is the OpenFirmware device path to the disk containing
## kernel images.  if your disk is /dev/hda you can find the
## OpenFirmware path by running the command:  ofpath /dev/hda

device=/pci@80000000/pci-bridge@d/ADPT,2930CU@2/@1:

## partition is the partition number where the kernel images are
## located.  The kernel images should be on your root filesystem, so
## this is usually the same partition number as your root filesystem.
## so if root = /dev/hda3 (the 3rd partition) then you should have
## partition=3  This *MUST* be set correct or yaboot won't boot!  This
## option can be either set globally as shown here, or per image in
## the image= sections.

partition=3

## delay is the amount of time in seconds the dual boot menu (if one
## is configured, by the presense of macos, macosx, etc options here)
## will wait before choosing the default OS (GNU/Linux or the value of
## defaultos=).  If you omit this then the value of timeout=
## (converted to seconds) will be used.

delay=10

## timeout is the amount of time in tenths of a second that yaboot
## will wait before booting the default kernel image (the first image=
## section in this config file or the value of default=).

timeout=20
install=/usr/local/lib/yaboot/yaboot
magicboot=/usr/local/lib/yaboot/ofboot

## Change the default colors, fgcolor is the text color, bgcolor is
## the screen background color. (default: fgcolor=white, bgcolor=black)
fgcolor=black
bgcolor=green

## Password supplied in plaintext, required for yaboot to boot, unless
## restricted is also present (see below).  Be sure to
## chmod 600 /boot/yaboot.conf if you set this!

#password=secret

## Password supplied as an md5 hash, see above

#password=$1$saltstrg$HnJ/gcM3oKhNbnzUPgXTD/

## A password is only required to boot an image specified here if
## parameters are specified on the command line or if the user enters
## an image is not specified in the configuration file at all (ie.
## arbitrary file load).  restricted can also be placed in an image
## section in that case any image not including the restricted keyword
## will be fully password protected.

#restricted

## image is the kernel itself, commonly kept in / but also commonly
## found in /boot.  Note that /boot should generally not be its own
## partition on powerpcs, its not necessary and complicates things.
## Make sure /boot is on the partition specified by partition= see
## above. /boot should never be an HFS filesystem.  You may point
## image= to a symbolic link so long as the symlink does not cross
## partition boundries.

image=/vmlinux
	label=Linux
	root=/dev/sda3
	read-only

image=/vmlinux.old
	label=Linux.old
	root=/dev/sda3
	read-only

## The {macos,macosx,darwin} variables can be either a unix /dev node or an
## OpenFirmware path, as shown here:

## BSD root partition with bsd kernel at /bsd.  you must have the BSD
## bootloader ofwboot installed at /usr/local/lib/yaboot/ofwboot
bsd=/dev/sda5

## unix node
macos=/dev/sda8

## OpenFirmware path, this would likely be /dev/sda9 if you used a
## unix node instead.
macosx=/pci@80000000/pci-bridge@d/ADPT,2930CU@2/@1:9

darwin=/pci@80000000/pci-bridge@d/ADPT,2930CU@2/@1:10

## Add a menu entry to boot from the CDROM:

enablecdboot

## Add a menu entry to boot from the Network:

enablenetboot

## Add a menu entry to boot into an OpenFirmware prompt:

enableofboot