etc/init.d/vz-redhat.in

#!/bin/sh
#  Copyright (C) 2000-2007 SWsoft. All rights reserved.
#
#  This program is free software; you can redistribute it and/or modify
#  it under the terms of the GNU General Public License as published by
#  the Free Software Foundation; either version 2 of the License, or
#  (at your option) any later version.
#
#  This program is distributed in the hope that it will be useful,
#  but WITHOUT ANY WARRANTY; without even the implied warranty of
#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#  GNU General Public License for more details.
#
#  You should have received a copy of the GNU General Public License
#  along with this program; if not, write to the Free Software
#  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
#
#
# OpenVZ startup script

###
# chkconfig: 2345 96 88
# description: OpenVZ startup script.
###

### BEGIN INIT INFO
# Provides: vz
# required-start: $network $remote_fs $local_fs sshd
# required-stop:
# Default-Start: 2 3 5
# Default-Stop:
# Description: OpenVZ startup script.
### END INIT INFO


# This line is needed to cheat /etc/init.d/rc who expects action word

VZCONF=@PKGCONFDIR@/vz.conf

[ -f ${VZCONF}   ] || exit 0
. ${VZCONF}
[ "${VIRTUOZZO}" = "no" ] && exit 0

VZCTL=@SBINDIR@/vzctl
VZQUOTA=@SBINDIR@/vzquota
LOCKFILE=/var/lock/subsys/vz_lock
VESTAT=/proc/vz/vestat
MODULES=
MODULES_OTHER=
NET_MODULES=

[ -x ${VZCTL} ] || exit 0

VZDEV=venet0
PRELOAD_MODULES="af_packet"
if [ "${MODULES_DISABLED}" != "yes" ]; then
	MODULES="vzmon vzdquota vzdev"
	CPT_MODULES="vzcpt vzrst"
	VETH_MODULES="vzethdev"
	MODULES_OTHER="vzcompat ${CPT_MODULES} ${VETH_MODULES}"
	NET_MODULES="vznetdev vznet"
	if [ "${VZWDOG}" = "yes" ]; then
		MODULES="${MODULES} vzwdog"
	fi
fi
IPT_MODULES="ip_tables ${IPTABLES} xt_tcpudp"

CONFIG_DIR=@PKGCONFDIR@/conf

rc_done='..done'
rc_failed='..failed'
# Source function library.
if [ -r /etc/init.d/functions ]; then
	source /etc/init.d/functions
	if [ -r /etc/redhat-release ] || [ -r /etc/centos-release ]; then
		DISTR=redhat
	fi
elif [ -r /etc/rc.status ]; then
	source /etc/rc.status
	if [ -r /etc/SuSE-release ]; then
		DISTR=suse
	fi
fi

VEINFO=""
RETVAL=0
# Number of the parallel VEs on stop.
# In case empty value the number of parallel VEs calculated as 'num_cpu * 4'
PARALLEL=
cd /

# We used to install OpenVZ cron job when the vzctl package was
# installed, irrespective of whether OpenVZ was actually being
# run. Although the cron jobs didn't create any problems if someone
# wasn't running OpenVZ some users complained about the cron log file
# filling up, resource usage, and power consumption since systems
# wouldn't really idle. It really only makes sense to run the OpenVZ
# cron job if the vz service is turned on and not just merely
# having the package installed. This init.d script is an obvious place
# to install or remove the cron jobs based on the service
# being enabled or not.
SRC_CRONSCRIPT_DIR=@CRONDDIR@
DST_CRONSCRIPT_DIR=@DST_CRONDDIR@

function setup_cron()
{
	[ -z "$SRC_CRONSCRIPT_DIR" ] && return
	[ -d "$SRC_CRONSCRIPT_DIR" ] || return
	install -m644 -o root -g root $SRC_CRONSCRIPT_DIR/vz \
		$DST_CRONSCRIPT_DIR
}

function remove_cron()
{
	[ -z "$SRC_CRONSCRIPT_DIR" ] && return
	[ -d "$SRC_CRONSCRIPT_DIR" ] || return
	cat > $DST_CRONSCRIPT_DIR/vz <<EOF
# DO NOT EDIT THIS FILE!
#
# Contents of this file managed by /etc/init.d/vz script
# Master copy is $SRC_CRONSCRIPT_DIR/vz.
# Consult that file for documentation.
EOF
}

function get_kern_ver()
{
	local ver=$1

	set -- $(IFS='.-'; echo ${ver})
	echo $(((($1 * 256) + $2) * 256 + $3))
}

function get_parallel()
{
	[ -n "${PARALLEL}" ] && return
	PARALLEL=`awk '
BEGIN { num=0; }
$1 == "processor" { num++; }
END { print num * 4; }' /proc/cpuinfo`
}

check_is_root()
{
        ID=`id -u`
        if [ ! $ID -eq 0 ]; then 
                echo "You need to be root to run this command."
                exit 1
        fi
}

get_veinfo()
{
	if [ -f /proc/vz/veinfo ]; then
		VEINFO=/proc/vz/veinfo
	elif [ -f /proc/veinfo ]; then
		VEINFO=/proc/veinfo
	elif [ ! -f $VESTAT ]; then
		return 1
	fi
	return 0
}

print_success()
{
	if [ "$DISTR" = "redhat" ]; then
		echo_success
	else
		echo -n "$rc_done"
	fi
	echo
}

print_failure()
{
	echo -n "$1"
	if [ "$DISTR" = "redhat" ]; then
		failure $"$1"
	else
		echo -n "$rc_failed"
	fi
	echo
}

__echo()
{
	if [ "$DISTR" = "redhat" ]; then
		echo -n $"$1"
	else
		echo -n "$1"
	fi
}

status()
{
	local base=${0##*/}
	if get_veinfo; then
		echo "OpenVZ is running..."
		return 0
	else
		echo "OpenVZ is stopped."
		return 3
	fi
}

function setup_net()
{
	local mod

	if ip a l | grep -q "venet0:.*UP" 2>/dev/null; then
		return 0
	fi
	for mod in ${NET_MODULES}; do
        	modprobe ${mod} 2>/dev/null
	done
	get_veinfo
	if [ -z "$VEINFO" ]; then
		return 0
	fi
	__echo "Bringing up interface $VZDEV: " 
	ip link set $VZDEV up 
	if [ $? -eq 0 ] ; then
		print_success
	else
		print_failure
	fi
	ip addr add 0.0.0.0/0 dev $VZDEV
	__echo "Configuring interface $VZDEV: "
	sysctl -w net.ipv4.conf.$VZDEV.send_redirects=0 >/dev/null
	if [ $? -eq 0 ] ; then
		print_success
	else
		print_failure
	fi
	if [ "${IPV6}" = "yes" ]; then
		__echo "Configuring ipv6 $VZDEV: "
		# Fix me: ip addres should be generated
		ip -6 addr add fe80::1/128 dev $VZDEV
		if [ $? -eq 0 ] ; then
			print_success
		else
			print_failure
		fi
	fi
}

function hn_setup()
{
	if test -z "${VE0CPUUNITS}"; then
		echo "Warning: VE0CPUUNITS is not set in ${VZCONF}; using value of 1000"
		VE0CPUUNITS=1000
	fi
	msg=`${VZCTL} set 0 --cpuunits ${VE0CPUUNITS} 2>&1`
	if [ $? -ne 0 ]; then
		print_failure "vzctl set 0 --cpuunits ${VE0CPUUNITS} failed: $msg"
	fi

	if ! test -f "${CONFIG_DIR}/0.conf"; then
		return
	fi
	if ! grep -q '^ONBOOT=yes\|^ONBOOT=\"yes\"' ${CONFIG_DIR}/0.conf;
	then
		return
	fi
	__echo "Configure node UB resources: "
	msg=`$VZCTL set 0 --reset_ub 2>&1`
	if [ $? -eq 0 ]; then
		print_success
	else
		print_failure "$msg"
	fi
}

function ve_start()
{
	local veid
	local velist
	local msg
	local need_restart

	need_restart=""
	cd ${CONFIG_DIR} || return
	velist=`grep -l '^ONBOOT=yes\|^ONBOOT=\"yes\"' [0-9]*.conf 2>/dev/null | \
		sed -e 's/.conf//g' | sort -n`
	cd - >/dev/null
	echo "0" > /proc/sys/net/ipv4/route/src_check
	for veid in $velist; do
		[ "${veid}" = "0" ] && continue 
		__echo "Starting VE ${veid}: "
		if [ "x${VZFASTBOOT}" = "xyes" -a "x${DISK_QUOTA}" = "xyes" ]; 
		then
			$VZQUOTA stat ${veid} >/dev/null 2>&1
			if [ $? -eq 6 ]; then
				if $VZQUOTA show ${veid} 2>&1 | grep "vzquota : (warning) Quota is running" >/dev/null 2>&1; then
					$VZQUOTA on ${veid} --nocheck >/dev/null 2>&1
					need_restart="${need_restart} ${veid}"
				fi
			fi
		fi
		msg=`$VZCTL start ${veid} 2>&1`
		if [ $? -eq 0 ]; then
			print_success
		else
			print_failure "$msg"
		fi
	done
	for veid in ${need_restart}; do
		__echo "Stopping VE ${veid}: "
		$VZCTL stop ${veid} 2>&1 >/dev/null 2>&1
		if [ $? -eq 0 ]; then
			print_success
		else
			print_failure "$msg"
		fi
		__echo "Starting VE ${veid}: "
		msg=`$VZCTL start ${veid} 2>&1`
		if [ $? -eq 0 ]; then
			print_success
		else
			print_failure "$msg"
		fi
	done
}

function ve_stop()
{
	local veid
	local velist
	local msg
	local m
	local mounts
	local fail
	local iter
	local quota
	local pids

	if get_veinfo; then
		get_parallel
		for ((i = 0; i <= 2; i++)); do
			iter=0;
			pids=
			velist=`awk '$1 != "VEID" && $1 != "Version:" {print $1}' ${VESTAT}`
			for veid in $velist; do
				echo "Shutting down VE $veid"
				# Set fairsched parameters to maximum so
				# VE will stop fast
				$VZCTL set $veid --cpuunits 2000 --cpulimit 0 >/dev/null 2>&1
				$VZCTL --skiplock stop $veid >/dev/null 2>&1 &
				pids="$pids $!"
				let iter++
				if [ ${iter} -gt ${PARALLEL} ]; then
					for pid in ${pids}; do
						wait ${pid}
					done
					pids=
					iter=0
				fi
			done
			for pid in $pids; do
				wait $pid
			done
		done
	fi
	iter=0
	fail=1
	while test $iter -lt 5 -a $fail -ne 0; do
		fail=0
		mounts=`awk '{if ($3=="simfs") print $2}' /proc/mounts`
		for m in $mounts; do
			__echo "Unmounting VE area "
			echo -n $m
			msg=`umount $m 2>&1`
			if [ $? -eq 0 ]; then
				print_success
			else
				print_failure "$msg"
				fail=$((fail+1))
				fuser -k -m ${m} > /dev/null 2>&1
			fi
		done
		iter=$((iter+1))
	done
	# turn quota off
	quota=`awk -F: '/^[0-9]+:/{print $1}' /proc/vz/vzquota 2>/dev/null`
	for m in ${quota}; do
		__echo "Turn quota off for VE "
		echo -n $m
		msg=`vzquota off ${m} 2>&1`
		if [ $? -eq 0 ]; then
			print_success
		else
			print_failure "$msg"
		fi
	done
}

function lockfile()
{
        local TEMPFILE="${1}.$$"
        local LOCKFILE="${1}"

        echo $$ > ${TEMPFILE} 2> /dev/null || {
		echo "Can't write to ${TEMPFILE}"
        }
    	ln ${TEMPFILE} ${LOCKFILE} >/dev/null 2>&1 && {
            	rm -f ${TEMPFILE};
            	return 0;
    	}
	kill -0 `cat $LOCKFILE` >/dev/null 2>&1 && {
		return 1;
    	}
    	ln ${TEMPFILE} ${LOCKFILE} >/dev/null 2>&1 && {
            	rm -f ${TEMPFILE};
            	return 0;
    	}
	rm -f ${LOCKFILE}
        echo $$ > ${LOCKFILE}
	return 0
}

function start()
{
	local veid
	local velist
	local msg

	if ! lockfile $LOCKFILE; then
		__echo "OpenVZ is locked"
		print_failure
		return 1
	fi
	if [ -f /var/lock/subsys/vz ]; then
		__echo "OpenVZ already running"
		print_failure
		return 1
	fi
	__echo "Starting OpenVZ: "
	load_modules "${IPT_MODULES}"
	for MOD in $PRELOAD_MODULES; do
		/sbin/modprobe -r $MOD >/dev/null 2>&1
		/sbin/modprobe $MOD >/dev/null 2>&1
	done
	for MOD in $MODULES; do
		/sbin/modprobe $MOD >/dev/null 2>&1
		RETVAL=$?
		if [ $RETVAL -ne 0 ]; then
			print_failure "failed to load module ${MOD}"
			return $RETVAL
		fi
	done
	load_modules "${MODULES_OTHER}"
	print_success "loading OpenVZ modules"

	if [ ! -e /dev/vzctl ]; then
		# On most modern distros udev will create a device for you,
		# while on the old distros /dev/vzctl comes with vzctl rpm.
		# So the below mknod call is probably not needed at all.
		/bin/mknod -m 600 /dev/vzctl c 126 0 > /dev/null 2>&1
		RETVAL=$?
		if [ $RETVAL -ne 0 ]; then
			__echo "creating vzctl device"
			print_failure
			return $RETVAL
		fi
	fi
	
	setup_net
	hn_setup
	setup_cron
	ve_start
	
	rm -f $LOCKFILE
	touch /var/lock/subsys/vz
}

function stop()
{
	if ! lockfile $LOCKFILE; then
		__echo "OpenVZ is locked"
		print_failure
		RETVAL=1
		return 1
	fi

	ve_stop
	remove_cron
	__echo "Stopping OpenVZ: "
	ip link set ${VZDEV} down 2>/dev/null
	for MOD in $MODULES; do
		/sbin/modprobe -r $MOD > /dev/null 2>&1
	done
	for MOD in $PRELOAD_MODULES ${IPT_MODULES2} ${NET_MODULES}; do
		/sbin/modprobe -r $MOD > /dev/null 2>&1
	done
	print_success
	rm -f $LOCKFILE
	rm -f /var/lock/subsys/vz
}

function load_modules()
{
	local modules=$1
	local mod

	for mod in ${modules}; do
		if /sbin/lsmod | grep -qw ${mod}; then
			continue
		fi
		/sbin/modprobe $mod >/dev/null 2>&1
	done
}

# See how we were called.
case "$1" in
  start)
  	start
	;;
  stop)
	stop
	;;
  restart)
	stop
	start
	;;
  status)
  	status
	RETVAL=$?
	;;
  *)
  	echo "Usage: $0 {start|stop|status|restart}"
	exit 1
esac

exit $RETVAL