etc/init.d/vz-redhat.in

#!/bin/sh
#  Copyright (C) 2000-2009, Parallels, Inc. All rights reserved.
#
#  This program is free software; you can redistribute it and/or modify
#  it under the terms of the GNU General Public License as published by
#  the Free Software Foundation; either version 2 of the License, or
#  (at your option) any later version.
#
#  This program is distributed in the hope that it will be useful,
#  but WITHOUT ANY WARRANTY; without even the implied warranty of
#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#  GNU General Public License for more details.
#
#  You should have received a copy of the GNU General Public License
#  along with this program; if not, write to the Free Software
#  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
#
#
# OpenVZ startup script, used for redhat and debian related distributions.

###
# chkconfig: 2345 96 88
# description: OpenVZ startup script.
###

### BEGIN INIT INFO
# Provides: vz
# required-start: $network $remote_fs $syslog
# required-stop:  $network $remote_fs $syslog
# Should-Start:  sshd
# Should-Stop:  sshd
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: OpenVZ startup script
# Description: OpenVZ startup script.
### END INIT INFO


# This line is needed to cheat /etc/init.d/rc who expects action word

VZCONF=@PKGCONFDIR@/vz.conf

[ -f ${VZCONF} ] || exit 0
. ${VZCONF}
[ "${VIRTUOZZO}" = "no" ] && exit 0

VZCTL=@SBINDIR@/vzctl
[ -x ${VZCTL} ] || exit 0

VZQUOTA=@SBINDIR@/vzquota
CONFIG_DIR=@PKGCONFDIR@/conf
LOCKFILE=/var/lock/subsys/vz_lock
SUBSYS_VZ=/var/lock/subsys/vz
VESTAT=/proc/vz/vestat
VZDEV=venet0
PRELOAD_MODULES=
MODULES=
MODULES_OTHER=
NET_MODULES=
IPT_MODULES=

if [ "${MODULES_DISABLED}" != "yes" ]; then
	PRELOAD_MODULES="af_packet"
	MODULES="vzmon vzdquota vzdev"
	CPT_MODULES="vzcpt vzrst"
	MODULES_OTHER="vzcompat ${CPT_MODULES}"
	VNET_MODULES="vznetdev vznet"
	VETH_MODULES="vzethdev"
	NET_MODULES="${VNET_MODULES} ${VETH_MODULES}"
	if [ "${VZWDOG}" = "yes" ]; then
		MODULES="${MODULES} vzwdog"
	fi
	IPT_MODULES="ip_tables ${IPTABLES} xt_tcpudp"
	if [ "${IPV6}" = "yes" ]; then
		IPT_MODULES="${IPT_MODULES} ${IP6TABLES}"
	fi
	VZFS_MODULES="simfs"
fi


rc_done='..done'
rc_failed='..failed'
# Source function library.
if [ -r /etc/init.d/functions ]; then
	source /etc/init.d/functions
	if [ -r /etc/redhat-release ] || [ -r /etc/centos-release ]; then
		DISTR=redhat
	fi
elif [ -r /etc/rc.status ]; then
	source /etc/rc.status
	if [ -r /etc/SuSE-release ]; then
		DISTR=suse
	fi
elif [ -r /etc/debian_version ]; then
	DISTR=debian
	LOCKFILE=/var/lock/vz_lock
	SUBSYS_VZ=/var/lock/vz
fi

VEINFO=""
RETVAL=0
# Number of the containers to stop in parallel.
# In case of empty value the number of CTs is calculated as 'num_cpu * 4'
PARALLEL=
cd /

# We used to install OpenVZ cron job when the vzctl package was
# installed, irrespective of whether OpenVZ was actually being
# run. Although the cron jobs didn't create any problems if someone
# wasn't running OpenVZ some users complained about the cron log file
# filling up, resource usage, and power consumption since systems
# wouldn't really idle. It really only makes sense to run the OpenVZ
# cron job if the vz service is turned on and not just merely
# having the package installed. This init.d script is an obvious place
# to install or remove the cron jobs based on the service
# being enabled or not.
SRC_CRONSCRIPT_DIR=@CRONDDIR@
DST_CRONSCRIPT_DIR=@DST_CRONDDIR@

check_old_cron_files()
{
	# avoid double OpenVZ cron settings
	local f
	for f in vpsreboot vpsnetclean; do
		[ -f $DST_CRONSCRIPT_DIR/$f ] && rm -f $DST_CRONSCRIPT_DIR/$f
	done
}

if ! type is_ignored_file >/dev/null 2>&1; then
	is_ignored_file() {
		case "$1" in
		    *~ | *.bak | *.orig | *.rpmnew | *.rpmorig | *.rpmsave)
			return 0
			;;
		esac
		return 1
	}
fi

setup_cron()
{
	local f ch

	check_old_cron_files
	[ -z "$SRC_CRONSCRIPT_DIR" ] && return
	[ -d "$SRC_CRONSCRIPT_DIR" ] || return
	[ -d "$DST_CRONSCRIPT_DIR" ] || return
	for f in $SRC_CRONSCRIPT_DIR/vz*; do
		if ! is_ignored_file $f; then
			cat $f > $DST_CRONSCRIPT_DIR/vz && ch=yes
		fi
	done
	[ $ch = 'yes' ] && chmod 644 $DST_CRONSCRIPT_DIR/vz
}

remove_cron()
{
	check_old_cron_files
	[ -z "$SRC_CRONSCRIPT_DIR" ] && return
	[ -d "$SRC_CRONSCRIPT_DIR" ] || return
	[ -d "$DST_CRONSCRIPT_DIR" ] || return
	cat > $DST_CRONSCRIPT_DIR/vz <<EOF
# DO NOT EDIT THIS FILE!
#
# Contents of this file managed by /etc/init.d/vz script
# Master copy is in $SRC_CRONSCRIPT_DIR/vz* file(s).
# Consult $SRC_CRONSCRIPT_DIR/vz* for documentation.
EOF
}

# Actualize OpenVZ cron entry:
# if OpenVZ is running, add it, otherwise remove.
update_cron()
{
	if is_running; then
		__echo "Adding OpenVZ cron entries"
		setup_cron
	else
		__echo "Removing OpenVZ cron entries"
		remove_cron
	fi
	print_result
}

check_kernel()
{
	if ! test -d /proc/vz ; then
		print_failure "Running kernel is not OpenVZ kernel."
		exit 1
	fi
}

get_kernel_version()
{
	[ ! -z "$KERNEL_MAJOR" ] && return

	local ver=$(uname -r)
	local kernel=$(echo $ver | sed s/[-+].*//)
	KERNEL_MAJOR=$(echo $kernel | awk -F . '{print $1}')
	KERNEL_MINOR=$(echo $kernel | awk -F . '{print $2}')
	KERNEL_PATCHLEVEL=$(echo $kernel | awk -F . '{print $3}')
}

check_kernel_config()
{
	test -r /proc/config.gz || return 0

	local conf opt err=0
	local opt_must="SIM_FS VE VE_CALLS VZ_GENCALLS"
	get_kernel_version
	# For kernels >= 2.6.9 VZ_DEV must be set.
	test "${KERNEL_MINOR}" -ge 6 &&
		test "${KERNEL_PATCHLEVEL}" -gt 9 &&
			opt_must="${opt_must} VZ_DEV"
#	local opt_rec="SCHED_VCPU FAIRSCHED VZ_QUOTA VZ_QUOTA_UGID VE_NETDEV VE_ETHDEV
#			VE_IPTABLES VZ_CHECKPOINT VZ_WDOG"

	conf="`zcat /proc/config.gz 2>/dev/null | grep -E -v '^#|^$'`"

	for opt in $opt_must; do
		if ! echo "$conf" 2>/dev/null | grep -q "$opt="; then
			echo "ERROR: Missing kernel config option: CONFIG_$opt"
			err=1
		fi
	done
	if [ $err != 0 ]; then
		print_failure "Please recompile your kernel."
		exit 1
	fi
}

get_parallel()
{
	[ -n "${PARALLEL}" ] && return
	PARALLEL=`awk '
BEGIN { num=0; }
$1 == "processor" { num++; }
END { print num * 4; }' /proc/cpuinfo`
}

get_veinfo()
{
	if [ -f /proc/vz/veinfo ]; then
		VEINFO=/proc/vz/veinfo
	elif [ -f /proc/veinfo ]; then
		VEINFO=/proc/veinfo
	elif [ ! -f $VESTAT ]; then
		return 1
	fi
	return 0
}

print_success()
{
	if [ "$DISTR" = "redhat" ]; then
		echo_success
	else
		echo -n "$rc_done"
	fi
	echo
}

print_failure()
{
	echo -n "$1"
	if [ "$DISTR" = "redhat" ]; then
		failure $"$1"
	else
		echo -n "$rc_failed"
	fi
	echo
}

# Calls either print_success or print_failure, depending on $?
# Optional argument $1 -- an error string passed to print_failure.
print_result()
{
	if [ $? -eq 0 ] ; then
		print_success
	else
		print_failure "$1"
	fi
}

__echo()
{
	if [ "$DISTR" = "redhat" ]; then
		echo -n $"$1"
	else
		echo -n "$1"
	fi
}

is_running()
{
	get_veinfo || return 1
	[ -f $SUBSYS_VZ ] || return 1
}

status()
{
	check_kernel

	if is_running; then
		echo "OpenVZ is running..."
		return 0
	else
		echo "OpenVZ is stopped."
		return 3
	fi
}

start_net()
{
	local mod

	# load all kernel modules needed for containers networking
	for mod in ${NET_MODULES}; do
		modprobe ${mod} 2>/dev/null
	done

	if ip addr list | grep -q "venet0:.*UP" 2>/dev/null; then
		return 0
	fi

	get_veinfo
	if [ -z "$VEINFO" ]; then
		return 0
	fi
	__echo "Bringing up interface $VZDEV: "
	ip link set $VZDEV up
	print_result
	ip addr add 0.0.0.0/0 dev $VZDEV
	__echo "Configuring interface $VZDEV: "
	sysctl -q -w net.ipv4.conf.$VZDEV.send_redirects=0
	print_result
	if [ "${IPV6}" = "yes" ]; then
		__echo "Configuring ipv6 $VZDEV: "
		# Fix me: ip addres should be generated
		ip -6 addr add fe80::1/128 dev $VZDEV
		print_result
	fi
}

stop_net()
{
	local mod

	if ip addr list | grep -q "venet0:.*UP" 2>/dev/null; then
		__echo "Bringing down interface $VZDEV: "
		ip link set $VZDEV down
		print_result
	fi
	for mod in ${NET_MODULES}; do
		/sbin/modprobe -r ${mod} > /dev/null 2>&1
	done
}

setup_ve0()
{
	if test -z "${VE0CPUUNITS}"; then
		echo "Warning: VE0CPUUNITS is not set in ${VZCONF}; using value of 1000"
		VE0CPUUNITS=1000
	fi
	msg=`${VZCTL} set 0 --cpuunits ${VE0CPUUNITS} 2>&1`
	if [ $? -ne 0 ]; then
		print_failure "vzctl set 0 --cpuunits ${VE0CPUUNITS} failed: $msg"
	fi

	if ! test -f "${CONFIG_DIR}/0.conf"; then
		return
	fi
	if ! grep -q '^ONBOOT=yes\|^ONBOOT=\"yes\"' ${CONFIG_DIR}/0.conf;
	then
		return
	fi
	__echo "Configure node UB resources: "
	msg=`$VZCTL set 0 --reset_ub 2>&1`
	print_result "$msg"
}

start_ves()
{
	local veid
	local velist
	local msg
	local need_restart

	need_restart=""
	velist=$(vzlist -aH -octid,onboot -s-bootorder |
		awk '$2 == "yes" {print $1}')
	sysctl -q -w net.ipv4.route.src_check=0
	for veid in $velist; do
		[ "${veid}" = "0" ] && continue
		__echo "Starting CT ${veid}: "
		if [ "x${VZFASTBOOT}" = "xyes" -a "x${DISK_QUOTA}" = "xyes" ];
		then
			$VZQUOTA stat ${veid} >/dev/null 2>&1
			if [ $? -eq 6 ]; then
				if $VZQUOTA show ${veid} 2>&1 | grep "vzquota : (warning) Quota is running" >/dev/null 2>&1; then
					$VZQUOTA on ${veid} --nocheck >/dev/null 2>&1
					need_restart="${need_restart} ${veid}"
				fi
			fi
		fi
		msg=`$VZCTL start ${veid} 2>&1`
		print_result "$msg"
	done
	for veid in ${need_restart}; do
		__echo "Stopping CT ${veid}: "
		$VZCTL stop ${veid} 2>&1 >/dev/null 2>&1
		print_result "$msg"
		__echo "Starting CT ${veid}: "
		msg=`$VZCTL start ${veid} 2>&1`
		print_result "$msg"
	done
}

stop_ves()
{
	local veid
	local velist
	local msg
	local m
	local mounts
	local fail
	local iter
	local quota
	local pids

	if get_veinfo; then
		get_parallel
		for i in 0 1 2; do
			iter=0;
			pids=
			velist=`awk '$1 != "VEID" && $1 != "Version:" {print $1}' ${VESTAT}`
			for veid in $velist; do
				echo "Shutting down CT $veid"
				# Set fairsched parameters to maximum so
				# CT will stop fast
				$VZCTL set $veid --cpuunits 2000 --cpulimit 0 >/dev/null 2>&1
				$VZCTL --skiplock stop $veid >/dev/null 2>&1 &
				pids="$pids $!"
				iter=$(($iter+1))
				if [ ${iter} -gt ${PARALLEL} ]; then
					for pid in ${pids}; do
						wait ${pid}
					done
					pids=
					iter=0
				fi
			done
			for pid in $pids; do
				wait $pid
			done
		done
	fi
	iter=0
	fail=1
	while test $iter -lt 5 -a $fail -ne 0; do
		fail=0
		mounts=`awk '{if ($3=="simfs") print $2}' /proc/mounts`
		for m in $mounts; do
			__echo "Unmounting CT area "
			echo -n $m
			msg=`umount $m 2>&1`
			if [ $? -eq 0 ]; then
				print_success
			else
				print_failure "$msg"
				fail=$((fail+1))
				fuser -k -m ${m} > /dev/null 2>&1
			fi
		done
		iter=$(($iter+1))
	done
	# turn quota off
	quota=`awk -F: '/^[0-9]+:/{print $1}' /proc/vz/vzquota 2>/dev/null`
	for m in ${quota}; do
		__echo "Turn quota off for CT "
		echo -n $m
		msg=`vzquota off ${m} 2>&1`
		print_result "$msg"
	done
}

lockfile()
{
	local TEMPFILE="${1}.$$"
	local LOCKFILE="${1}"

	trap -- "rm -f ${LOCKFILE} ${TEMPFILE}" EXIT

	echo $$ > ${TEMPFILE} 2> /dev/null || {
		echo "Can't write to ${TEMPFILE}"
	}
	ln ${TEMPFILE} ${LOCKFILE} >/dev/null 2>&1 && {
		rm -f ${TEMPFILE};
		return 0;
	}
	kill -0 `cat $LOCKFILE` >/dev/null 2>&1 && {
		return 1;
	}
	ln ${TEMPFILE} ${LOCKFILE} >/dev/null 2>&1 && {
		rm -f ${TEMPFILE};
		return 0;
	}
	rm -f ${LOCKFILE}
	echo $$ > ${LOCKFILE}
	return 0
}

start()
{
	local veid
	local velist
	local msg
	local mod

	check_kernel
	check_kernel_config

	if ! lockfile $LOCKFILE; then
		__echo "OpenVZ is locked"
		print_failure
		return 1
	fi
	if [ -f ${SUBSYS_VZ} ]; then
		__echo "OpenVZ already running"
		print_failure
		return 1
	fi
	__echo "Starting OpenVZ: "
	load_modules "${IPT_MODULES}"
	for mod in $PRELOAD_MODULES; do
		/sbin/modprobe -r $mod >/dev/null 2>&1
		/sbin/modprobe $mod >/dev/null 2>&1
	done
	for mod in $MODULES; do
		/sbin/modprobe $mod >/dev/null 2>&1
		RETVAL=$?
		if [ $RETVAL -ne 0 ]; then
			print_failure "failed to load module ${mod}"
			return $RETVAL
		fi
	done
	load_modules "${MODULES_OTHER} ${VZFS_MODULES}"
	print_success "loading OpenVZ modules"

	if [ ! -e /dev/vzctl ]; then
		# On most modern distros udev will create a device for you,
		# while on the old distros /dev/vzctl comes with vzctl rpm.
		# So the below mknod call is probably not needed at all.
		/bin/mknod -m 600 /dev/vzctl c 126 0 > /dev/null 2>&1
		RETVAL=$?
		if [ $RETVAL -ne 0 ]; then
			print_failure "creating /dev/vzctl"
			return $RETVAL
		fi
	fi

	start_net
	setup_ve0
	setup_cron
	start_ves

	rm -f $LOCKFILE
	touch $SUBSYS_VZ
}

stop()
{
	local mod

	if ! lockfile $LOCKFILE; then
		__echo "OpenVZ is locked"
		print_failure
		RETVAL=1
		return 1
	fi

	stop_ves
	remove_cron
	stop_net
	__echo "Stopping OpenVZ: "
	for mod in ${MODULES_OTHER} ${MODULES} ${PRELOAD_MODULES} ${IPT_MODULES} ${VZFS_MODULES}; do
		/sbin/modprobe -r ${mod} > /dev/null 2>&1
	done
	rm -f $LOCKFILE
	rm -f $SUBSYS_VZ
	print_success
}

load_modules()
{
	local modules=$1
	local mod

	for mod in ${modules}; do
		if /sbin/lsmod | grep -qw ${mod}; then
			continue
		fi
		/sbin/modprobe ${mod} >/dev/null 2>&1
	done
}

# See how we were called.
case "$1" in
  start)
	start
	;;
  stop)
	stop
	;;
  restart|force-reload)
	stop
	start
	;;
  status)
	status
	RETVAL=$?
	;;
  update-cron)
	update_cron
	RETVAL=0
	;;
  *)
	echo "Usage: $0 {start|stop|status|restart|force-reload|update-cron}"
	exit 1
esac

exit $RETVAL