scripts/vps-functions.in - vzctl - Rivoreo Source Code Repositories

 #!/bin/sh
 #  Copyright (C) 2000-2015, Parallels, Inc. All rights reserved.
 #
 #  This program is free software; you can redistribute it and/or modify
 #  it under the terms of the GNU General Public License as published by
 #  the Free Software Foundation; either version 2 of the License, or
 #  (at your option) any later version.
 #
 #  This program is distributed in the hope that it will be useful,
 #  but WITHOUT ANY WARRANTY; without even the implied warranty of
 #  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 #  GNU General Public License for more details.
 #
 #  You should have received a copy of the GNU General Public License
 #  along with this program; if not, write to the Free Software
 #  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 #
 #
 # Common stuff for vzctl helper scripts

 # get the name of the script
 SELFNAME="${0##*/}"

 # Set the sane umask
 umask 022

 # Error codes
 VZ_INVALID_PARAMETER_SYNTAX=20
 VZ_FS_NO_DISK_SPACE=46
 VZ_FS_BAD_TMPL=47
 VZ_FS_NEW_VE_PRVT=48
 VZ_CHANGEPASS=74
 VZ_CANT_ADDIP=34
 VZ_IP_INUSE=78

 VE_STATE_DIR="@VEIPDUMPDIR@"

 # From net/if.h
 IFF_UP=0x1
 IFF_BROADCAST=0x2
 IFF_DEBUG=0x4
 IFF_LOOPBACK=0x8
 IFF_POINTOPOINT=0x10
 IFF_NOTRAILERS=0x20
 IFF_RUNNING=0x40
 IFF_NOARP=0x80
 IFF_PROMISC=0x100
 IFF_ALLMULTI=0x200
 IFF_MASTER=0x400
 IFF_SLAVE=0x800
 IFF_MULTICAST=0x1000
 IFF_PORTSEL=0x2000
 IFF_AUTOMEDIA=0x4000
 IFF_DYNAMIC=0x8000

 ARPSEND_CMD="arpsend -c 1 -w 1"
 IP_CMD="ip"

 # For 'ip' and 'arpsend' to work,
 # make sure these dirs are in $PATH
 for d in /sbin /usr/sbin @SBINDIR@; do
 	case ":${PATH}:" in
 		*:"${d}":*)
 			;;
 		*)
 			PATH=${d}:$PATH
 			;;
 	esac
 done

 # Prints error message and exits
 # Parameters:
 #   $1 - error message
 #   $2 - exit code
 # Example of usage:
 #   vzerror "Fatal error" 1
 vzerror()
 {
 	# print errors to stderr too
 	ERR=$?
 	echo "$SELFNAME ERROR: $1" 1>&2
 	exit $2
 }

 # Prints warning message
 # Parameters:
 #   $1 - a message
 # Example of usage:
 #   vzwarning 'Invalid user'
 vzwarning()
 {
 	echo "$SELFNAME WARNING: $1" 1>&2
 }

 # Prints debug message
 # Parameters:
 #   $* - debug message
 # Example of usage:
 #   vzdebug Trying to start ls
 vzdebug()
 {
 	echo "$SELFNAME: $*" 1>&2
 }

 # Checks if environment variable exists,
 # and exits with exit code 1 if not
 # Parameters:
 #   $* - option names
 # Example:
 #   vzcheckvar VEID IP_ADDR
 vzcheckvar()
 {
 	local var

 	for var; do
 		eval test -n "\"\$$var\"" ||
 			vzerror "Missing parameter: $var" $VZ_INVALID_PARAMETER_SYNTAX
 	done
 }

 # Creates a pair of veth devices, being one of them in the host, and the other
 # inside the container The function should be called with the following env
 # variables set:
 #
 #  HNAME: The intended name of the device in the host side
 #  VNAME: The indented name of the device inside the container
 #  VEID:  The numerical container id.
 #
 # HNAME and VNAME must be different, since they will at some point cohexist at
 # the host side, and our name convention forced by vzctl tool guarantees that
 # this shouldn't be a problem for sane setups.
 #
 # This function leaves the host device in the "link up" state, but with no
 # further configuration. The container device setup is left entirely to the
 # container.
 #
 # If the device given by HNAME in the host already exists, this function exits
 # with no visible action.
 vzcreatepair()
 {
 	${IP_CMD} link show | grep -w -F $HNAME >/dev/null 2>&1 && return

 	${IP_CMD} netns exec $VEID ${IP_CMD} link add name $HNAME type veth peer name $VNAME
 	${IP_CMD} netns exec $VEID ${IP_CMD} link set $HNAME netns $$
 	${IP_CMD} link set $HNAME up
 }

 # Move an already existing interface to the network namespace given by VEID
 vzmoveif()
 {
 	if [ ! -d "/sys/class/net/$HNAME" ]; then
 		vzerror "Can't move non-existent interface"
 		return;
 	fi

 	${IP_CMD} link set $HNAME netns $VEID
 }

 # Removes the interface referred to by VNAME from the container.
 vzdestroylink()
 {
 	${IP_CMD} netns exec $VEID ${IP_CMD} link delete $VNAME type veth
 }

 # Adjusts host-side and container's interface configuration so they have the
 # desired mac addresses.  The host mac address is given by HMAC, and the
 # container's by VMAC.  They are both optional parameters. If no mac is
 # specified, this function does nothing.
 vzadjustmacs()
 {
 	if [ "x$HMAC" != "x" ]; then
 		${IP_CMD} link set dev $HNAME address $HMAC
 	fi

 	if [ "x$VMAC" != "x" ]; then
 		${IP_CMD} netns exec $VEID ${IP_CMD} link set dev $VNAME address $VMAC
 	fi
 }

 # Bridge configuration function.
 #
 # It allows us to automatically insert a given host-side interface (HNAME) into
 # a bridge. Calling the bridge "venet0" has a special meaning, since this is a
 # bridge expected to always exist in our setup. In this case, we'll make sure
 # the bridge exists by creating it in case we are the first caller.  For all
 # other setups, the bridge is expected to already exist and be valid.
 vzconfbridge()
 {
 	if [ "x$BRIDGE" = "xvenet0" ]; then
 		if [ $(brctl show venet0 2>/dev/null | tail -n+2 | wc -l) -eq 0 ]; then
 			brctl addbr venet0
 			ifconfig venet0 up
 		fi
 	fi

 	if [ "x$BRIDGE" != "x" ]; then
 		brctl addif $BRIDGE $HNAME >/dev/null 2>&1
 	fi
 }

 # Move back an interface to the host namespace.
 #
 # When we move a physical host-side network device to the container, this is
 # what we should call to undo the operation.
 vzregainif()
 {
 	${IP_CMD} netns exec $VEID ${IP_CMD} link set $VNAME netns $$
 }

 # This function fills $NETDEVICES with all network interfaces
 # You should always call it before calling vzarp
 vzgetnetdev()
 {
 	# Get a list of interfaces, excluding ones with LOOPBACK,
 	# NOARP, or SLAVE flags
 	local flags
 	NETDEVICES=
 	for f in /sys/class/net/*/flags; do
 		[ -f "$f" ] || continue
 		flags="`cat \"$f\"`" || continue
 		[ $((flags&IFF_UP)) = 0 ] && continue
 		[ $((flags&(IFF_LOOPBACK|IFF_NOARP|IFF_SLAVE))) != 0 ] && continue
 		name="${f#/sys/class/net/}"
 		name="${name%/flags}"
 		[ -n "$NETDEVICES" ] && NETDEVICES="$NETDEVICES
 $name" || NETDEVICES="$name"
 	done
 }

 # Find neighbour interfaces for a given CT IP.
 # Make sure to source @PKGCONFDIR@/vz.conf before calling this,
 # in order to get the value of $NEIGHBOUR_DEVS from it.
 vz_get_neighbour_devs()
 {
 	[ -n "$NETDEVICES" ] || vzwarning 'Device list is empty'
 	[ -n "$1" -a -n "$NETDEVICES" ] || return 1

 	case "$NEIGHBOUR_DEVS" in
 	   detect)
 		# Fall through to detection code below
 		;;
 	   list:*)
 		echo "${NEIGHBOUR_DEVS#list:}"
 		return 0
 		;;
 	   all|"")
 		echo $NETDEVICES
 		return 0
 		;;
 	   *)
 		cat << EOF >&2
 WARNING: unknown value for NEIGHBOUR_DEVS: ${NEIGHBOUR_DEVS}.
 Please fix it in @PKGCONFDIR@/vz.conf; see man vz.conf for allowed values.
 EOF
 		# Assume "all" for now
 		echo $NETDEVICES
 		return 0
 		;;
 	   esac

 	local route devs dev netdev

 	route="$(${IP_CMD} route get "$1" |grep ' dev .* src ')"
 	# match: $1 ... dev $dev ...
 	devs="$(echo "$route" |sed -ne '/ via /! s/^.* dev \+\([^ ]\+\) .*$/\1/p;Q')"
 	[ -n "$devs" ] ||
 	# match: $1 ... via $1 ... dev $dev ...
 	devs="$(echo "$route" |sed -ne 's/^\([^ ]\+\) \(.* \)\?via \+\1 \(.* \)\?dev \+\([^ ]\+\) .*$/\4/p;Q')"
 	[ -n "$devs" ] || return 0

 	for netdev in $NETDEVICES; do
 		for dev in $devs; do
 			if [ "$dev" = "$netdev" ]; then
 				echo "$dev"
 			fi
 		done
 	done
 }

 # Adds/deletes public ARP records for given IP for all interfaces
 # Parameters:
 #   $1		- should be either "add" or "del"
 #   $2		- IP address
 #   $NETDEVICES - Network devices used to take MAC addresses from
 vzarp()
 {
 	local dev

 	for dev in $(vz_get_neighbour_devs "$2"); do
 		${IP_CMD} neigh "$1" proxy "$2" dev "$dev" >/dev/null 2>&1

 		# Send ARP request to update neighbour ARP caches
 		if [ "$1" = "add" ]; then
 			${ARPSEND_CMD} -U -i "$2" -e "$2" "$dev" ||
 				vzwarning "$ARPSEND_CMD -U -i $2 -e $2 $dev FAILED"
 		fi
 	done
 }

 # Send ARP request to detect that somebody already have this IP
 vzarpipdetect()
 {
 	[ -n "$1" ] || return
 	[ "$SKIP_ARPDETECT" = 'yes' ] && return
 	local errwarn
 	[ "$ERROR_ON_ARPFAIL" = 'yes' ] && errwarn=vzerror || errwarn=vzwarning

 	local dev ipm ip

 	for ipm in $1; do
 		ip=${ipm%%/*}
 		for dev in $(vz_get_neighbour_devs "$ip"); do
 			${ARPSEND_CMD} -D -e "$ip" "$dev" ||
 				$errwarn "$ARPSEND_CMD -D -e $ip $dev FAILED" 1
 		done
 	done
 }

 vzaddrouting4()
 {
 	local src_addr=

 	if [ -n "$VE_ROUTE_SRC_DEV" ]; then
 		src_addr=`${IP_CMD} route list table local dev "$VE_ROUTE_SRC_DEV" |
 			grep '^local' | cut -d' ' -f2 | grep -v '^127\.' | head -n 1`
 		[ -n "$src_addr" ] ||
 			vzerror "Unable to get source ip [${VE_ROUTE_SRC_DEV}]" $VZ_CANT_ADDIP
 		src_addr="src $src_addr"
 	fi
 	${IP_CMD} route add "$1" dev venet0 $src_addr ||
 		if [ "$FORCE_ROUTE" = 'yes' ]; then
 			${IP_CMD} route change "$1" dev venet0 $src_addr ||
 				vzerror "Unable to add or change route ${IP_CMD} route change $1 dev venet0 $src_addr" $VZ_CANT_ADDIP
 		else
 			vzerror "Unable to add route ${IP_CMD} route add $1 dev venet0 $src_addr" $VZ_CANT_ADDIP
 		fi
 }

 vzaddrouting6()
 {
 	${IP_CMD} route add "$1" dev venet0 ||
 		if [ "$FORCE_ROUTE" = 'yes' ]; then
 			${IP_CMD} route change "$1" dev venet0 ||
 				vzerror "Unable to add or change route ${IP_CMD} route change $1 dev venet0" $VZ_CANT_ADDIP
 		else
 			vzerror "Unable to add route ${IP_CMD} route add $1 dev venet0" $VZ_CANT_ADDIP
 		fi
 }

 # Sets VE0 source routing for given IP
 # Parameters:
 #   $1 - IP address
 vzaddrouting()
 {

 	${IP_CMD} route list table all "$1" | grep -Fq "$1 dev venet0" &&
 		return 0
 	if [ "${1#*:}" = "$1" ]; then
 		vzaddrouting4 "$1"
 	else
 		vzaddrouting6 "$1"
 	fi
 }

 # Deletes VE0 source routing for given IP
 # Parameters:
 #   $1 - IP address
 vzdelrouting()
 {
 	${IP_CMD} route list table all "$1" | grep -Fq "$1 dev venet0" ||
 		return 0
 	local arg

 	if [ "${1%%:*}" = "$1" ]; then
 		arg="route del $1 dev venet0"
 	else
 		arg="-6 route flush $1 dev venet0"
 	fi
 	${IP_CMD} $arg ||
 		vzwarning "vzdelrouting: ${IP_CMD} $arg failed"
 }
	#!/bin/sh
	# Copyright (C) 2000-2015, Parallels, Inc. All rights reserved.
	#
	# This program is free software; you can redistribute it and/or modify
	# it under the terms of the GNU General Public License as published by
	# the Free Software Foundation; either version 2 of the License, or
	# (at your option) any later version.
	#
	# This program is distributed in the hope that it will be useful,
	# but WITHOUT ANY WARRANTY; without even the implied warranty of
	# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	# GNU General Public License for more details.
	#
	# You should have received a copy of the GNU General Public License
	# along with this program; if not, write to the Free Software
	# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
	#
	#
	# Common stuff for vzctl helper scripts

	# get the name of the script
	SELFNAME="${0##*/}"

	# Set the sane umask
	umask 022

	# Error codes
	VZ_INVALID_PARAMETER_SYNTAX=20
	VZ_FS_NO_DISK_SPACE=46
	VZ_FS_BAD_TMPL=47
	VZ_FS_NEW_VE_PRVT=48
	VZ_CHANGEPASS=74
	VZ_CANT_ADDIP=34
	VZ_IP_INUSE=78

	VE_STATE_DIR="@VEIPDUMPDIR@"

	# From net/if.h
	IFF_UP=0x1
	IFF_BROADCAST=0x2
	IFF_DEBUG=0x4
	IFF_LOOPBACK=0x8
	IFF_POINTOPOINT=0x10
	IFF_NOTRAILERS=0x20
	IFF_RUNNING=0x40
	IFF_NOARP=0x80
	IFF_PROMISC=0x100
	IFF_ALLMULTI=0x200
	IFF_MASTER=0x400
	IFF_SLAVE=0x800
	IFF_MULTICAST=0x1000
	IFF_PORTSEL=0x2000
	IFF_AUTOMEDIA=0x4000
	IFF_DYNAMIC=0x8000

	ARPSEND_CMD="arpsend -c 1 -w 1"
	IP_CMD="ip"

	# For 'ip' and 'arpsend' to work,
	# make sure these dirs are in $PATH
	for d in /sbin /usr/sbin @SBINDIR@; do
	case ":${PATH}:" in
	:"${d}":)
	;;
	*)
	PATH=${d}:$PATH
	;;
	esac
	done

	# Prints error message and exits
	# Parameters:
	# $1 - error message
	# $2 - exit code
	# Example of usage:
	# vzerror "Fatal error" 1
	vzerror()
	{
	# print errors to stderr too
	ERR=$?
	echo "$SELFNAME ERROR: $1" 1>&2
	exit $2
	}

	# Prints warning message
	# Parameters:
	# $1 - a message
	# Example of usage:
	# vzwarning 'Invalid user'
	vzwarning()
	{
	echo "$SELFNAME WARNING: $1" 1>&2
	}

	# Prints debug message
	# Parameters:
	# $* - debug message
	# Example of usage:
	# vzdebug Trying to start ls
	vzdebug()
	{
	echo "$SELFNAME: $*" 1>&2
	}

	# Checks if environment variable exists,
	# and exits with exit code 1 if not
	# Parameters:
	# $* - option names
	# Example:
	# vzcheckvar VEID IP_ADDR
	vzcheckvar()
	{
	local var

	for var; do
	eval test -n "\"\$$var\"" \|\|
	vzerror "Missing parameter: $var" $VZ_INVALID_PARAMETER_SYNTAX
	done
	}

	# Creates a pair of veth devices, being one of them in the host, and the other
	# inside the container The function should be called with the following env
	# variables set:
	#
	# HNAME: The intended name of the device in the host side
	# VNAME: The indented name of the device inside the container
	# VEID: The numerical container id.
	#
	# HNAME and VNAME must be different, since they will at some point cohexist at
	# the host side, and our name convention forced by vzctl tool guarantees that
	# this shouldn't be a problem for sane setups.
	#
	# This function leaves the host device in the "link up" state, but with no
	# further configuration. The container device setup is left entirely to the
	# container.
	#
	# If the device given by HNAME in the host already exists, this function exits
	# with no visible action.
	vzcreatepair()
	{
	${IP_CMD} link show \| grep -w -F $HNAME >/dev/null 2>&1 && return

	${IP_CMD} netns exec $VEID ${IP_CMD} link add name $HNAME type veth peer name $VNAME
	${IP_CMD} netns exec $VEID ${IP_CMD} link set $HNAME netns $$
	${IP_CMD} link set $HNAME up
	}

	# Move an already existing interface to the network namespace given by VEID
	vzmoveif()
	{
	if [ ! -d "/sys/class/net/$HNAME" ]; then
	vzerror "Can't move non-existent interface"
	return;
	fi

	${IP_CMD} link set $HNAME netns $VEID
	}

	# Removes the interface referred to by VNAME from the container.
	vzdestroylink()
	{
	${IP_CMD} netns exec $VEID ${IP_CMD} link delete $VNAME type veth
	}

	# Adjusts host-side and container's interface configuration so they have the
	# desired mac addresses. The host mac address is given by HMAC, and the
	# container's by VMAC. They are both optional parameters. If no mac is
	# specified, this function does nothing.
	vzadjustmacs()
	{
	if [ "x$HMAC" != "x" ]; then
	${IP_CMD} link set dev $HNAME address $HMAC
	fi

	if [ "x$VMAC" != "x" ]; then
	${IP_CMD} netns exec $VEID ${IP_CMD} link set dev $VNAME address $VMAC
	fi
	}

	# Bridge configuration function.
	#
	# It allows us to automatically insert a given host-side interface (HNAME) into
	# a bridge. Calling the bridge "venet0" has a special meaning, since this is a
	# bridge expected to always exist in our setup. In this case, we'll make sure
	# the bridge exists by creating it in case we are the first caller. For all
	# other setups, the bridge is expected to already exist and be valid.
	vzconfbridge()
	{
	if [ "x$BRIDGE" = "xvenet0" ]; then
	if [ $(brctl show venet0 2>/dev/null \| tail -n+2 \| wc -l) -eq 0 ]; then
	brctl addbr venet0
	ifconfig venet0 up
	fi
	fi

	if [ "x$BRIDGE" != "x" ]; then
	brctl addif $BRIDGE $HNAME >/dev/null 2>&1
	fi
	}

	# Move back an interface to the host namespace.
	#
	# When we move a physical host-side network device to the container, this is
	# what we should call to undo the operation.
	vzregainif()
	{
	${IP_CMD} netns exec $VEID ${IP_CMD} link set $VNAME netns $$
	}

	# This function fills $NETDEVICES with all network interfaces
	# You should always call it before calling vzarp
	vzgetnetdev()
	{
	# Get a list of interfaces, excluding ones with LOOPBACK,
	# NOARP, or SLAVE flags
	local flags
	NETDEVICES=
	for f in /sys/class/net/*/flags; do
	[ -f "$f" ] \|\| continue
	flags="`cat \"$f\"`" \|\| continue
	[ $((flags&IFF_UP)) = 0 ] && continue
	[ $((flags&(IFF_LOOPBACK\|IFF_NOARP\|IFF_SLAVE))) != 0 ] && continue
	name="${f#/sys/class/net/}"
	name="${name%/flags}"
	[ -n "$NETDEVICES" ] && NETDEVICES="$NETDEVICES
	$name" \|\| NETDEVICES="$name"
	done
	}

	# Find neighbour interfaces for a given CT IP.
	# Make sure to source @PKGCONFDIR@/vz.conf before calling this,
	# in order to get the value of $NEIGHBOUR_DEVS from it.
	vz_get_neighbour_devs()
	{
	[ -n "$NETDEVICES" ] \|\| vzwarning 'Device list is empty'
	[ -n "$1" -a -n "$NETDEVICES" ] \|\| return 1

	case "$NEIGHBOUR_DEVS" in
	detect)
	# Fall through to detection code below
	;;
	list:*)
	echo "${NEIGHBOUR_DEVS#list:}"
	return 0
	;;
	all\|"")
	echo $NETDEVICES
	return 0
	;;
	*)
	cat << EOF >&2
	WARNING: unknown value for NEIGHBOUR_DEVS: ${NEIGHBOUR_DEVS}.
	Please fix it in @PKGCONFDIR@/vz.conf; see man vz.conf for allowed values.
	EOF
	# Assume "all" for now
	echo $NETDEVICES
	return 0
	;;
	esac

	local route devs dev netdev

	route="$(${IP_CMD} route get "$1" \|grep ' dev .* src ')"
	# match: $1 ... dev $dev ...
	devs="$(echo "$route" \|sed -ne '/ via /! s/^.* dev \+\([^ ]\+\) .*$/\1/p;Q')"
	[ -n "$devs" ] \|\|
	# match: $1 ... via $1 ... dev $dev ...
	devs="$(echo "$route" \|sed -ne 's/^\([^ ]\+\) \(.* \)\?via \+\1 \(.* \)\?dev \+\([^ ]\+\) .*$/\4/p;Q')"
	[ -n "$devs" ] \|\| return 0

	for netdev in $NETDEVICES; do
	for dev in $devs; do
	if [ "$dev" = "$netdev" ]; then
	echo "$dev"
	fi
	done
	done
	}

	# Adds/deletes public ARP records for given IP for all interfaces
	# Parameters:
	# $1 - should be either "add" or "del"
	# $2 - IP address
	# $NETDEVICES - Network devices used to take MAC addresses from
	vzarp()
	{
	local dev

	for dev in $(vz_get_neighbour_devs "$2"); do
	${IP_CMD} neigh "$1" proxy "$2" dev "$dev" >/dev/null 2>&1

	# Send ARP request to update neighbour ARP caches
	if [ "$1" = "add" ]; then
	${ARPSEND_CMD} -U -i "$2" -e "$2" "$dev" \|\|
	vzwarning "$ARPSEND_CMD -U -i $2 -e $2 $dev FAILED"
	fi
	done
	}

	# Send ARP request to detect that somebody already have this IP
	vzarpipdetect()
	{
	[ -n "$1" ] \|\| return
	[ "$SKIP_ARPDETECT" = 'yes' ] && return
	local errwarn
	[ "$ERROR_ON_ARPFAIL" = 'yes' ] && errwarn=vzerror \|\| errwarn=vzwarning

	local dev ipm ip

	for ipm in $1; do
	ip=${ipm%%/*}
	for dev in $(vz_get_neighbour_devs "$ip"); do
	${ARPSEND_CMD} -D -e "$ip" "$dev" \|\|
	$errwarn "$ARPSEND_CMD -D -e $ip $dev FAILED" 1
	done
	done
	}

	vzaddrouting4()
	{
	local src_addr=

	if [ -n "$VE_ROUTE_SRC_DEV" ]; then
	src_addr=`${IP_CMD} route list table local dev "$VE_ROUTE_SRC_DEV" \|
	grep '^local' \| cut -d' ' -f2 \| grep -v '^127\.' \| head -n 1`
	[ -n "$src_addr" ] \|\|
	vzerror "Unable to get source ip [${VE_ROUTE_SRC_DEV}]" $VZ_CANT_ADDIP
	src_addr="src $src_addr"
	fi
	${IP_CMD} route add "$1" dev venet0 $src_addr \|\|
	if [ "$FORCE_ROUTE" = 'yes' ]; then
	${IP_CMD} route change "$1" dev venet0 $src_addr \|\|
	vzerror "Unable to add or change route ${IP_CMD} route change $1 dev venet0 $src_addr" $VZ_CANT_ADDIP
	else
	vzerror "Unable to add route ${IP_CMD} route add $1 dev venet0 $src_addr" $VZ_CANT_ADDIP
	fi
	}

	vzaddrouting6()
	{
	${IP_CMD} route add "$1" dev venet0 \|\|
	if [ "$FORCE_ROUTE" = 'yes' ]; then
	${IP_CMD} route change "$1" dev venet0 \|\|
	vzerror "Unable to add or change route ${IP_CMD} route change $1 dev venet0" $VZ_CANT_ADDIP
	else
	vzerror "Unable to add route ${IP_CMD} route add $1 dev venet0" $VZ_CANT_ADDIP
	fi
	}

	# Sets VE0 source routing for given IP
	# Parameters:
	# $1 - IP address
	vzaddrouting()
	{

	${IP_CMD} route list table all "$1" \| grep -Fq "$1 dev venet0" &&
	return 0
	if [ "${1#*:}" = "$1" ]; then
	vzaddrouting4 "$1"
	else
	vzaddrouting6 "$1"
	fi
	}

	# Deletes VE0 source routing for given IP
	# Parameters:
	# $1 - IP address
	vzdelrouting()
	{
	${IP_CMD} route list table all "$1" \| grep -Fq "$1 dev venet0" \|\|
	return 0
	local arg

	if [ "${1%%:*}" = "$1" ]; then
	arg="route del $1 dev venet0"
	else
	arg="-6 route flush $1 dev venet0"
	fi
	${IP_CMD} $arg \|\|
	vzwarning "vzdelrouting: ${IP_CMD} $arg failed"
	}