| # Copyright (C) 2000-2009, Parallels, Inc. All rights reserved. |
| # |
| # This program is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; either version 2 of the License, or |
| # (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program; if not, write to the Free Software |
| # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| # |
| |
| # Generic configuration |
| AC_PREREQ(2.59) |
| AC_INIT(vzctl, 4.0, devel@openvz.org) |
| AC_CONFIG_SRCDIR([src/vzctl.c]) |
| |
| # Change sysconfdir default since otherwise some important files |
| # (an initscript, files for logrotate, and udev) will be installed |
| # to some nonsence/non-working place like under /usr/local/etc/ |
| # |
| # NOTE: this changes expected configure behavior: if you specify --prefix |
| # it will not change sysconfdir, instead now one have to specify |
| # --sysconfdir explicitly. To make it more clear we print |
| # current sysconfdir value at the end of configure run. |
| # |
| # FIXME: dirty hack, may not work with some autoconf versions. |
| test $sysconfdir = '${prefix}/etc' && sysconfdir=/etc |
| |
| AC_CANONICAL_BUILD |
| AC_CANONICAL_HOST |
| AC_CANONICAL_TARGET |
| |
| # If we are on an x86_64, libraries should go to lib64. |
| if test "$target_cpu" = "x86_64" -a "$libdir" = '${exec_prefix}/lib'; then |
| libdir='${exec_prefix}/lib64' |
| fi |
| |
| # Automake |
| AM_INIT_AUTOMAKE([1.9 foreign dist-bzip2]) |
| |
| # Enable silent build rules by default, requires at least |
| # Automake-1.11. Disable by either passing --disable-silent-rules to |
| # configure or passing V=1 to make |
| m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])]) |
| |
| # Disable build of static libraries by default. |
| AC_DISABLE_STATIC |
| |
| # Checks for programs. |
| m4_ifdef([AC_USE_SYSTEM_EXTENSIONS], [AC_USE_SYSTEM_EXTENSIONS]) |
| AC_PROG_CC |
| AC_PROG_LIBTOOL |
| AC_PROG_INSTALL |
| AC_PROG_LN_S |
| AC_PROG_MAKE_SET |
| |
| # Compiler settings |
| CFLAGS="${CFLAGS} -Wall -Wpointer-arith -Wcast-qual -Winline -Wextra" |
| CFLAGS="${CFLAGS} -Wcast-align -Wno-unused-parameter" |
| CFLAGS="${CFLAGS} -Wno-missing-field-initializers" |
| CFLAGS="${CFLAGS} -D_FILE_OFFSET_BITS=64" |
| |
| # We need -m64 for ppc64 in order to get proper ioctls |
| if test x$target_cpu = xppc64 -o x$target_cpu = xpowerpc64; then |
| CFLAGS="${CFLAGS} -m64" |
| fi |
| |
| # Checks for libraries. |
| AC_CHECK_LIB(dl, dlopen, |
| DL_LIBS="-ldl", AC_MSG_ERROR([libdl not found]),) |
| |
| AC_SUBST(DL_LIBS) |
| |
| AC_CHECK_LIB(util, openpty, |
| UTIL_LIBS="-lutil", AC_MSG_ERROR([libutil not found]),) |
| |
| AC_SUBST(UTIL_LIBS) |
| |
| # Checks for header files. |
| AC_CHECK_HEADERS([arpa/inet.h fcntl.h limits.h netdb.h netinet/in.h \ |
| sys/file.h sys/ioctl.h sys/mount.h sys/param.h sys/socket.h \ |
| sys/vfs.h termios.h],, |
| AC_MSG_ERROR([some needed header(s) not found])) |
| #AC_HEADER_MAJOR |
| |
| # Checks for typedefs, structures, and compiler characteristics. |
| AC_C_INLINE |
| AC_CHECK_MEMBERS([struct stat.st_rdev],, |
| AC_MSG_ERROR([no st_rdev member in struct stat])) |
| AC_TYPE_SIZE_T |
| AC_TYPE_UID_T |
| m4_ifdef([AC_TYPE_UINT16_T], [AC_TYPE_UINT16_T]) |
| m4_ifdef([AC_TYPE_UINT32_T], [AC_TYPE_UINT32_T]) |
| m4_ifdef([AC_TYPE_UINT8_T], [AC_TYPE_UINT8_T]) |
| |
| # Checks for library functions. |
| AC_FUNC_ALLOCA |
| AC_FUNC_FORK |
| AC_FUNC_LSTAT_FOLLOWS_SLASHED_SYMLINK |
| AC_FUNC_MALLOC |
| AC_FUNC_REALLOC |
| AC_FUNC_STRNLEN |
| AC_CHECK_FUNCS([alarm bzero dup2 endgrent endpwent memset mkdir mkfifo \ |
| realpath rmdir select socket strcasecmp strchr strdup strerror \ |
| strrchr strstr strtol strtoul strtoull uname],, |
| AC_MSG_ERROR([some needed function(s) not found])) |
| |
| AC_ARG_ENABLE([bashcomp], |
| [AS_HELP_STRING([--enable-bashcomp], |
| [Enable bashcompletion support])], |
| [case "${enableval}" in |
| yes) enable_bashcomp="+bashcomp";; |
| no) enable_bashcomp="-bashcomp";; |
| *) AC_MSG_ERROR(bad value ${enableval} for --enable-bashcomp);; |
| esac], |
| [enable_bashcomp="-bashcomp"]) |
| AM_CONDITIONAL(ENABLE_BASHCOMP, test "x$enable_bashcomp" = "x+bashcomp") |
| |
| AC_ARG_ENABLE([logrotate], |
| [AS_HELP_STRING([--enable-logrotate], |
| [Enable logrotate support])], |
| [case "${enableval}" in |
| yes) enable_logrotate="+logrotate";; |
| no) enable_logrotate="-logrotate";; |
| *) AC_MSG_ERROR(bad value ${enableval} for --enable-logrotate);; |
| esac], |
| [enable_logrotate="-logrotate"]) |
| AM_CONDITIONAL(ENABLE_LOGROTATE, test "x$enable_logrotate" = "x+logrotate") |
| |
| AC_ARG_ENABLE([udev], |
| [AS_HELP_STRING([--disable-udev], |
| [Disable udev support])], |
| [case "${enableval}" in |
| yes) enable_udev="+udev";; |
| no) enable_udev="-udev";; |
| *) AC_MSG_ERROR(bad value ${enableval} for --enable-udev);; |
| esac], |
| [enable_udev="+udev"]) |
| AM_CONDITIONAL(ENABLE_UDEV, test "x$enable_udev" = "x+udev") |
| |
| AC_ARG_WITH([ploop], |
| [AS_HELP_STRING([--with-ploop], |
| [Enable support for ploop])], |
| [case "${withval}" in |
| yes) with_ploop="+ploop";; |
| no) with_ploop="-ploop";; |
| *) AC_MSG_ERROR(bad value ${withval} for --with-ploop);; |
| esac], |
| [with_ploop="+ploop"]) |
| |
| AS_IF([test "x$with_ploop" = "x+ploop"], |
| [ AC_CHECK_HEADER(ploop/dynload.h, , |
| [ AC_MSG_ERROR( [ |
| The ploop library headers not found or way too old. You need to either |
| install recent ploop library headers (most probably ploop-devel package), |
| or use ./configure --without-ploop] ) ] |
| ) ] |
| ) |
| |
| AS_IF([test "x$with_ploop" = "x+ploop"], |
| [ AM_PATH_XML2(2.6.16, , |
| AC_MSG_ERROR([Please install libxml2 devel package])) |
| AC_DEFINE(HAVE_PLOOP, [1], [Define to enable ploop support]) ]) |
| AM_CONDITIONAL(HAVE_PLOOP, [test "x$with_ploop" = "x+ploop"]) |
| |
| AC_ARG_WITH([cgroup], |
| [AS_HELP_STRING([--with-cgroup], |
| [Enable support for cgroup and upstream kernel])], |
| [case "${withval}" in |
| yes) with_cgroup="+cgroup";; |
| no) with_cgroup="-cgroup";; |
| *) AC_MSG_ERROR(bad value ${withval} for --with-cgroup);; |
| esac], |
| [with_cgroup="+cgroup"]) |
| |
| AS_IF([test "x$with_cgroup" = "x+cgroup"], |
| [ PKG_CHECK_MODULES(CGROUP, [libcgroup >= 0.37]) |
| AC_DEFINE(HAVE_UPSTREAM, [1], [Define to enable upstream kernel support]) |
| AC_CHECK_FUNCS([setns]) ] |
| ) |
| AM_CONDITIONAL(HAVE_CGROUP, [test "x$with_cgroup" = "x+cgroup"]) |
| AC_SUBST(CGROUP_LIBS) |
| AC_SUBST(CGROUP_CFLAGS) |
| |
| # Final info page |
| AC_CONFIG_COMMANDS_PRE([SUMMARY="$PACKAGE_STRING configured successfully: |
| |
| CC: $CC ($($CC --version | head -n1)) |
| CFLAGS: '$CFLAGS' |
| build: $build |
| host: $host |
| target: $target |
| prefix: $prefix |
| sysconfdir: $sysconfdir |
| libdir: $libdir |
| features: $enable_bashcomp $enable_logrotate $enable_udev $with_ploop $with_cgroup |
| "]) |
| |
| # Output |
| AC_CONFIG_FILES([bin/Makefile |
| etc/bash_completion.d/Makefile |
| etc/conf/Makefile |
| etc/dists/Makefile |
| etc/init.d/Makefile |
| etc/logrotate.d/Makefile |
| etc/network/if-up.d/Makefile |
| etc/network-scripts/Makefile |
| etc/udev/Makefile |
| etc/Makefile |
| include/version.h |
| man/Makefile |
| scripts/Makefile |
| src/lib/Makefile |
| src/Makefile |
| Makefile]) |
| AC_OUTPUT |
| |
| AC_MSG_NOTICE([$SUMMARY]) |