regress/conf/ad21dbb0893240563ddfdd954b9903a1.conf

# Time-stamp: <2018-05-31 17:10:05 kmodi>
# https://github.com/tmux/tmux
# Hi-lock: (("\\(^\\s< \\**\\)\\(\\* *.*\\)" (1 'org-hide prepend) (2 '(:inherit org-level-1 :height 1.3 :weight bold :overline t :underline t) prepend)))
# Hi-Lock: end

# Running tmux built from master branch on tcsh in uxterm
# tmux version 2.5-RC+ dev

# Contents:
#
#  PREFIX
#  Source config
#  Pane Management
#    Window <-join/split-> Pane
#    Select Panes
#    Resize Panes
#    Dynamic Split
#  Window Management
#    Window Navigation
#    Swap Windows
#    Split Window
#    Layout
#  Session Management
#  Mouse
#    Drag pane border to resize
#    Left click on pane
#    Middle click on pane
#    Right click on pane
#    Wheel scroll in pane
#      Wheel scroll in pane WHILE in copy-mode
#    Left click on status
#    Middle click on status
#    Other mouse settings
#  Window Title
#  Status Bar
#    Left Status
#    Right Status
#    Pane Status
#  Colors
#    Status Bar Colors
#    Message Colors
#    Window Status Colors
#    Pane Colors
#    Mode Info Colors
#  Activity
#  Command Prompt
#  Audible and Visual Bells
#  Copy & Paste
#  Synchronize commands to panes/windows/sessions
#  Terminal Setting
#  Other Options
#    Server Options
#    Session Options
#    Window Options
#  Notes

# * PREFIX
set   -g prefix C-z
unbind C-b # unbind the default binding to send prefix key to the application
# Often you'll run a tmux inside another tmux and need a command sequence to
# send things to the inner session. With below binding that can be accomplished
# using "PREFIX Z <command>"
bind   Z send-prefix

# * Source config
unbind r # unbind default binding to force redraw of attached client
bind   r source-file ~/.tmux.conf \; display "Finished sourcing ~/.tmux.conf ."

# * Pane Management

set   -g pane-base-index 1   # start pane indices at 1
set   -g main-pane-width 100 # used by selectl main-vertical
bind   z resize-pane -Z      # zoom/unzoom the current pane
# If the window has >1 panes kill them without confirming. But confirm before kill
# the last pane (along with its window) in a window
bind   x if "tmux display -p \"#{window_panes}\" | grep ^1\$" \
    "confirm-before -p \"Kill the only pane in window? It will kill this window too! (y/n)\" kill-pane" \
    "kill-pane"
bind   C clear-history \; display "Cleared history of the current pane."
unbind C-p
bind   C-p run -b "tmux display -p -F '#{pane_current_path}' | xclip -i -sel pri" \; display "Copied current path '#{pane_current_path}' to the primary selection."

# Hooks need tmux 2.3+
# set-hook -g -u after-kill-pane # Remove after hook for kill-pane
set-hook -g after-kill-pane "selectl main-vertical"
# If -g options is used when setting the hook, it has to be used when
# removing (-u option) the hook too.

# ** Window <-join/split-> Pane
# Join a pane *from* a different window (of same or different session) into the CURRENT window
# Binding mnemonic: F for (F)etch/pull (as in git) from a different window
bind   F command-prompt -p "Join pane from [sess:]win#[.pane#] (ex: kmodi:3.1) into current window:" "join-pane -s '%%'"
# Join CURRENT pane *to* a different window
# Binding mnemonic: P for (P)ush (as in git) to a different window
bind   P command-prompt -p "Send CURRENT pane to [sess:]win# (ex: kmodi:3):" "join-pane -t '%%'"
# PREFIX ! : break-pane, convert the current pane to a window

# ** Select Panes
bind   o select-pane -t :.+  # cycle to the next pane number
bind   O select-pane -t :.-  # cycle to the previous pane number
# PREFIX ; : last-pane or select-pane -l, switch to the last active pane
# PREFIX ← : select-pane -L, switch to the pane on the left
# PREFIX → : select-pane -R, switch to the pane on the right
# PREFIX ↑ : select-pane -U, switch to the pane on the top
# PREFIX ↓ : select-pane -D, switch to the pane on the bottom
# PREFIX { : swap-pane -U, swap current pane with the pane above (not literally above)
# PREFIX } : swap-pane -D, swap current pane with the pane below (not literally below)

# ** Resize Panes
bind  -r   h resize-pane -L 2
bind  -r C-h resize-pane -L 2
bind  -r   j resize-pane -D 2
bind  -r C-j resize-pane -D 2
bind  -r   k resize-pane -U 2
bind  -r C-k resize-pane -U 2
unbind l # unbind default binding for `last-window`
bind  -r   l resize-pane -R 2
bind  -r C-l resize-pane -R 2

# ** Dynamic Split
# Key-chaining example, analogous to prefix maps in emacs
bind / switch-client -Tlauncher
# Run below -Tlauncher commands using "PREFIX / <binding>"
# Open calendar in a split window "PREFIX / c"
# FIXME: Below does not work; cal pane quits as soon as it launches (before "&& sleep .."
# was added). To make better of the situation, I now auto-close that pane after 3 seconds.
# bind -Tlauncher c split-window -h 'cal && sleep 3'
bind -Tlauncher c run "/home/kmodi/scripts/tcsh/tmux/dynamic_split.csh 'cal && sleep 3'"
# Start emacsclient in terminal mode in a split window "PREFIX / e"
# Use the emacs binding "C-x 5 0" to quit from that pane gracefully.
bind -Tlauncher e run "/home/kmodi/scripts/tcsh/tmux/dynamic_split.csh 'emacsclient -a \"\" -t'"
# Open man page "PREFIX / m"
# PREFIX / m will bring up the tmux command prompt. Enter the command for which
# you want to see the man page, example: ls. That man page will open in a split
# pane.  When you are done reviewing the man page, hit q and the split pane
# closes by itself.  Beautiful!
bind -Tlauncher m command-prompt -p "man" "run \"/home/kmodi/scripts/tcsh/tmux/dynamic_split.csh 'man %1'\""
# Open python interpreter in a split window for quick calculations "PREFIX / p"
# Ctrl-D in python quits python and thus closes the split window too.
bind -Tlauncher p run "/home/kmodi/scripts/tcsh/tmux/dynamic_split.csh 'ipython --profile=default --no-confirm-exit'"
# PREFIX Up, Down, Right, Left : Move cursor from one pane to another
# PREFIX Space                 : Cycle through different pane layouts
# PREFIX C-o                   : rotate-window, rotate panes in the current window

# * Window Management
set   -g base-index 1 # start window indices at 1
# automatically renumber the windows
# http://unix.stackexchange.com/questions/21742/renumbering-windows-in-tmux
set   -g renumber-windows on

bind C-f command-prompt -p "New window:" "new-window -c '#{pane_current_path}' -n %1"
bind C-r command-prompt -p "New name for this window:" "rename-window '%%'"
unbind L # unbind default binding for `switch-client -l`
bind   L list-windows -F '#{window_index}:#{window_name}: #{?pane_dead, (dead), (not dead)}'
unbind & # unbind default binding for `kill-window`
bind C-c confirm-before -p "Kill this window? (y/n)" kill-window
# Move the current window to another window index in the same or any other session
bind   m command-prompt -p "Move window to sess or sess:win# or win# (ex: kmodi or kmodi:3 or 2(of current session)):" "move-window -t '%%'"
# Move or bring a window from a different session to the current one
bind   M command-prompt -p "Move the window from sess:win# (ex: kmodi:3):" "move-window -s '%%'"

# ** Window Navigation
bind C-z last-window # switch to last active window
# Allow repeats for next/previous-window
bind -r p previous-window
bind -r n next-window
# switch to another window by name
bind   W split-window "tmux lsw | peco --initial-index `tmux lsw | awk '/active.$/ {print NR-1}'` | cut -d':' -f 1 | xargs tmux select-window -t"
# PREFIX <N> : switches to window with index=N

# ** Swap Windows
bind   N move-window -r # renumber the windows
unbind  , # unbind default binding for `rename-window`
bind -r , swap-window -t -1 # move window one position to the left
bind -r < swap-window -t -1 # move window one position to the left
unbind  . # unbind default binding to move window to user provided index
bind -r . swap-window -t +1 # move window one position to the right
bind -r > swap-window -t +1 # move window one position to the right
unbind t # unbind default binding to show time
bind   t swap-window -t 1 # swap the current window's position with window # 1, move it to the top

# ** Split Window
unbind & # unbind default binding for `split-window -h`
bind - split-window -v -c '#{pane_current_path}' # vertical split
bind _ split-window -v -c '#{pane_current_path}' -f # full vertical split (v2.3+)
bind \ split-window -h -c '#{pane_current_path}' # horizontal split
bind | split-window -h -c '#{pane_current_path}' -f # full horizontal split (v2.3+)
# https://www.reddit.com/r/tmux/comments/3paqoi/tmux_21_has_been_released/cw5wy00
bind w switch-client -Tsplit_wind
bind -Tsplit_wind v split-window -v -c '#{pane_current_path}'
bind -Tsplit_wind V split-window -v -c '#{pane_current_path}'\; swap-pane -U
bind -Tsplit_wind h split-window -h -c '#{pane_current_path}'
bind -Tsplit_wind H split-window -h -c '#{pane_current_path}'\; swap-pane -U

# ** Layout
bind Space   next-layout
bind C-Space select-layout -o # undo only the last layout change #v2.1

# * Session Management
bind C-t command-prompt -p "New name for this session:" "rename-session '%%'"
bind   b switch-client -l # switch to previously selected session
# switch to another session by name
bind   S split-window "tmux ls | peco --initial-index `tmux ls | awk '/attached.$/ {print NR-1}'` | cut -d':' -f 1 | xargs tmux switch-client -t"
# switch to ANY window in ANY session by name
bind   s split-window "tmux ls | cut -d: -f1 | xargs -I SESSION tmux lsw -F 'SESSION:#{window_name}' -t SESSION | peco --initial-index `tmux ls | cut -d: -f1 | xargs -I SESSION tmux lsw -F '___#{session_attached}#{window_active}___' -t SESSION | awk '/___11___/ {print NR-1}'` | xargs tmux switch-client -t"
# tmux kill-session -t NAME/SESSIONNUMBER # Kill session

# * Mouse
# setw  -g mode-mouse on # incompatible in tmux 2.1+
set -g mouse on

# ** Drag pane border to resize
# set   -g mouse-resize-pane off # incompatible in tmux 2.1+
bind -T root MouseDrag1Border resize-pane -M # default
# unbind -T root MouseDrag1Border # disable drag pane border to resize

bind -T root MouseDrag1Pane if -Ft= '#{mouse_any_flag}' 'if -Ft= "#{pane_in_mode}" "copy-mode -M" "send-keys -M"' 'copy-mode -M' # default

# ** Left click on pane
# set   -g mouse-select-pane on # incompatible in tmux 2.1+
# Left click on a pane selects it
# bind -T root MouseDown1Pane select-pane -t=\; send-keys -M # default
bind -T root MouseDown1Pane select-pane -t=

# Sun Feb 19 11:31:34 EST 2017 - kmodi
# Below break in tmux 2.4
# # Fri Aug 26 18:35:21 EDT 2016 - kmodi
# # FIXME Need to remember why I unbound the below 2 bindings
# unbind -temacs-copy MouseDown1Pane
# unbind -temacs-copy MouseUp1Pane
# #

# https://groups.google.com/forum/#!topic/tmux-users/mHhdx7Au0Ds
# Fri Aug 26 18:30:15 EDT 2016 - kmodi
# Do not do the below!! That will update the primary selection with the top-most
# tmux buffer each time you left click on a pane.
# bind -T root MouseUp1Pane run -b "tmux show-buffer | xclip -i -sel pri"
#

# Left click in the pane *followed after a region selection* copies that to the
# secondary selection
bind -T root MouseUp1Pane run -b "tmux show-buffer | xclip -i -sel sec"
# Fri Aug 26 19:03:57 EDT 2016 - kmodi
# FIXME: As of today it needs to be figured out how to best paste the content
# from secondary selection

# ** Middle click on pane
# Middle click in a pane to paste from the primary selection
bind -T root MouseDown2Pane run -b "xclip -o -sel pri | tmux load-buffer - && tmux paste-buffer -s ' '"

# ** Right click on pane
# Right click on a pane selects and marks it *if not in copy-mode*; else
# passes on the mode keys
# bind -T root MouseDown3Pane select-pane -t= -m # default
bind -T root MouseDown3Pane if -Ft= '#{pane_in_mode}' 'send-keys -M' 'select-pane -t= -m'

# Sun Feb 19 11:32:00 EST 2017 - kmodi
# Below breaks in tmux 2.4
# # Right click *release* on a pane *in copy-mode* quits copy-mode
# bind -temacs-copy MouseUp3Pane cancel

# ** Wheel scroll in pane
unbind -T root WheelUpPane
unbind -T root WheelDownPane
# Do mouse wheel-up to enter copy mode and do page-up
# https://groups.google.com/d/msg/tmux-users/XTrSVUR15Zk/3iyJLMyQ7PwJ
# Below binding did not work
#   bind -T root WheelUpPane if -Ft= '#{mouse_any_flag}' 'if -Ft= "#{pane_in_mode}" "copy-mode -u" "send-keys -M"' 'copy-mode -u'
# Below works and allows the WheelUpPane binding in emacs-copy table to be effective
bind -T root WheelUpPane if -Ft= '#{mouse_any_flag}' 'send-keys -M' 'if -Ft= "#{pane_in_mode}" "send-keys -M" "copy-mode -u"'
# |---------------------+-----------------------------------------+--------------------------------|
# | using mouse? AND .. | #{pane_in_mode} (already in copy-mode?) | action                         |
# |---------------------+-----------------------------------------+--------------------------------|
# | Yes                 | Don't care                              | Send the mode keys             |
# | No                  | Yes                                     | Send the mode keys             |
# | No                  | No                                      | Enable copy-mode and do PageUp |
# |---------------------+-----------------------------------------+--------------------------------|

# *** Wheel scroll in pane WHILE in copy-mode
# Sun Feb 19 11:32:16 EST 2017 - kmodi
# Below breaks in tmux 2.4
# # Once in copy-mode, mouse wheel scrolls scrolls by half pages
# bind -temacs-copy WheelUpPane   halfpage-up
# bind -temacs-copy WheelDownPane halfpage-down

# ** Left click on status
# set   -g mouse-select-window on # incompatible in tmux 2.1+
# Left click on a window name in status bar to select it
bind -T root MouseDown1Status select-window -t= # default

# ** Middle click on status
# Middle click on a window name in status bar to kill it
bind -T root MouseDown2Status kill-window

# ** Other mouse settings
# The special token ‘{mouse}’ or ‘=’ may be used as target-window or target-pane in
# commands bound to mouse key bindings. Example: -t =

# * Window Title
set   -g set-titles on
set   -g set-titles-string '#h :: #S:W#I(#W).P#P'

# * Status Bar
set   -g status-interval     5 # default = 15 seconds
set   -g status-justify      centre

# ** Left Status
set   -g status-left-length  20
# Change the left status when prefix is pressed.
# https://www.reddit.com/r/tmux/comments/5cm2ca/post_you_favourite_tmux_tricks_here/d9ziuy9/
set   -g status-left "#{?client_prefix,#[fg=yellow]prefix pressed ..,[#S]}"

# ** Right Status
set   -g status-right-length 20
set   -g status-right        "%l:%M %b %d %a "

# ** Pane Status
setw -g pane-border-status "bottom"
setw -g pane-border-format " #P #T "

# # tmux-powerline
# # https://github.com/erikw/tmux-powerline
# set -g status-left-length 30
# set -g status-right-length 30
# set -g status-left "#(~/usr_local/scripts/tmux-powerline/powerline.sh left)"
# set -g status-right "#(~/usr_local/scripts/tmux-powerline/powerline.sh right)"

# * Colors

# ** Status Bar Colors
set   -g status-style                 fg=colour246,bg=colour233 # default for whole status line
set   -g status-left-style            fg=white,bold,bg=colour233
set   -g status-right-style           fg=colour75,none,bg=colour233

# ** Message Colors
set   -g message-style                fg=colour2,bold,bg=default

# ** Window Status Colors
setw  -g window-status-style          default # default for all window statuses
setw  -g window-status-last-style     fg=default,bg=colour235
setw  -g window-status-current-style  fg=white,bold,bg=colour63
setw  -g window-status-bell-style     default
setw  -g window-status-activity-style fg=white,none,bg=colour196
# setw  -g window-status-content-style  fg=black,none,bg=green # incompatible with tmux 2.0+

# ** Pane Colors
setw  -g pane-active-border-style     fg=colour63,bg=default
setw  -g pane-border-style            fg=colour235,bg=default
setw  -g window-active-style          'bg=#330000' # bg color of active pane
setw  -g window-style                 'bg=black' # bg color of inactive pane(s)

# ** Mode Info Colors
# Color of display shown on top-right in copy-mode, highlighting
setw  -g mode-style                   fg=black,bg=colour244

# * Activity
# Notify when a window has activity
# This quick snippet will have tmux notify you in the status area when a
# window has activity:
setw  -g monitor-activity on
set   -g visual-activity  off # Display message telling that an activity happened (on/off)
# It lets me know that there is activity in a non-active window
# To try this, enter `sleep 10 && echo “Hi”` in a window and switch to
# another window.

# # Notify when a window has a content alert
# setw  -g monitor-content "--[A-Za-z][A-Za-z]sim Done--" # This string appears when a sim finishes, alert then # incompatible with tmux 2.0+
# # setw  -g monitor-content "" # Disable monitor-content
# set   -g visual-content  on # Display message telling that a content alert was triggered (on/off) # incompatible with tmux 2.0+

# * Command Prompt
# Move focus to command prompt. tmux commands can be entered there directly
# without using the `tmux` prefix and it also supports auto-complete.
bind C-x command-prompt # default command-prompt binding "PREFIX :" also works

# * Audible and Visual Bells
set   -g bell-action any
set   -g bell-on-alert off
set   -g visual-bell on

# * Copy & Paste
set -g set-clipboard off # default is on

# Copy tmux buffer to primary and clipboard selections
# run -b runs a shell command in background
# http://grota.github.io/blog/2012/05/08/tmux-clipboard-integration/
bind C-w run -b "tmux show-buffer | xclip -i -sel pri && tmux show-buffer | xclip -i -sel cli"
# Fri Aug 26 18:41:30 EDT 2016 - kmodi
# Below binding was suggested by Nicholas Marriott
# But the my older binding works fine so I am commenting out below for now.
# bind C-w run    "tmux saveb - | xclip -i -sel pri; tmux saveb - | xclip -i -sel cli"
# Paste into tmux; also replace LF characters with
# space as separator characters (-s) when pasting.
# Yank from primary
bind C-y run -b "xclip -o -sel pri | tmux load-buffer - && tmux paste-buffer -s ' '"
# Yank from clipboard
bind M-y run -b "xclip -o -sel cli | tmux load-buffer - && tmux paste-buffer -s ' '"
# Open the file/dir path that was copied by selection in existing emacs client
# Usage: Highlight a file name in ls output and press "PREFIX e"
bind   e run -b "tmux show-buffer | xclip -i -sel pri; (emacsclient -a '' `tmux display -p '#{pane_current_path}'`/`xclip -o -sel pri `&)"

# * Synchronize commands to panes/windows/sessions
# Send the same command to all panes in the same window
bind  C-a command-prompt -p "Command to all panes in this window:" \
          "run \"tmux list-panes                     -F '##{pane_index}'          | xargs -I PANE \
                 tmux send-keys     -t PANE          '%1' Enter\""
# Alternative to using the above "C-a" binding is to enable pane synchronization,
# type the command you want to execute in all panes in the same window and disable
# pane synchronization
# Also turn the pane borders red while pane synchronization is enabled.
#  - https://www.reddit.com/r/tmux/comments/5cm2ca/post_you_favourite_tmux_tricks_here/d9y6jzu/
bind  C-s if -F '#{pane_synchronized}' \
                     'setw synchronize-panes off; \
                      setw pane-active-border-style fg=colour63,bg=default; \
                      setw pane-border-format       " #P #T "' \
                   'setw synchronize-panes on; \
                    setw pane-active-border-style fg=red; \
                    setw pane-border-format       " #P - Pane Synchronization ON "'
# So it would be: C-s <type the command RET> C-s

# https://scripter.co/command-to-every-pane-window-session-in-tmux/
# Send the same command to all panes/windows in the current session
bind  C-e command-prompt -p "Command:" \
       "run \"tmux list-panes -s -F '##{session_name}:##{window_index}.##{pane_index}' \
              | xargs -I PANE tmux send-keys -t PANE '%1' Enter\""

# Send the same command to all panes/windows/sessions
bind E command-prompt -p "Command:" \
       "run \"tmux list-panes -a -F '##{session_name}:##{window_index}.##{pane_index}' \
              | xargs -I PANE tmux send-keys -t PANE '%1' Enter\""

# * Terminal Setting

# From `man tmux', about `default-terminal'
# Set the default terminal for new windows created in this session - the default
# value of the TERM environment variable.  For tmux to work correctly, this must
# be set to ‘screen’, ‘tmux’ or a derivative of them.
# set -g default-terminal "screen"
set -g default-terminal "screen-256color"
# Mon May 22 11:43:56 EDT 2017 - kmodi
# Blinking text (useful to show broken symlinks in ls) does not work when using tmux-24bits.
# set -g default-terminal "tmux-24bits"
# tmux-24bits is a custom terminfo profile created using the steps explained
# on https://github.com/ThomasAdam/tmux/blob/master/FAQ to support italics and
# 256 colors.

# Enable 24-bit color
# https://sunaku.github.io/tmux-24bit-color.html
set -ga terminal-overrides ",screen-256color:Tc"
# set -ga terminal-overrides ",tmux-24bits:Tc"

# Thu May 31 17:10:04 EDT 2018 - kmodi
# TODO: Try the 24-bit emacs+tmux config for ST
# https://www.reddit.com/r/emacs/comments/8ndm2x/gnu_emacs_261_24bit_colors_suckless_st_terminal/dzwh4vv/
# set -g default-terminal "tmux-256color"
# set -ga terminal-overrides ",*256col*:Tc"
#

setw -g xterm-keys on

# Uncomment below when using st (by suckless.org)
# set -g default-terminal "st-256color"
# # https://sunaku.github.io/tmux-24bit-color.html
# # st supports 24-bit color, so enable support for that in tmux
# set -ga terminal-overrides ",st-256color:Tc"
# setw -g xterm-keys off

bind R refresh-client
# bind R refresh-client \; display "Refreshed the client."

# * Other Options

# ** Server Options
set -s escape-time       0 # Allows for faster key repetition

# ** Session Options
# Set the default shell to /bin/sh. If the default is tcsh, doing a split-window takes a long
# time as my tcsh init is loaded first (which takes really long).
set -g default-shell     /bin/sh
# If I am doing a new-window or split-window without a specified command, start the tcsh
# shell by default.
set -g default-command   tcsh
set -g history-limit     100000
set -g display-time      1000 # Duration of tmux display messages in milliseconds

# ** Window Options
# When a smaller terminal connects to a tmux client, it shrinks to fit it. The
# clients attached with bigger displays see this constrained view.
# aggressive-resize makes it such that the window is only resized if the smaller
# client is actively looking at it.
setw -g aggressive-resize on
setw -g mode-keys         emacs # Use emacs keybindings in copy mode
setw -g status-keys       emacs

# * Notes

# |-------------------+------------|
# | tmux command      | short form |
# |-------------------+------------|
# | set-option        | set        |
# | set-window-option | setw       |
# | bind-key          | bind       |
# | unbind-key        | unbind     |
# | display-message   | display    |
# | run-shell         | run        |
# | if-shell          | if         |
# |-------------------+------------|

# Colo'u'r table
# http://guns.github.io/xterm-color-table.vim/images/xterm-color-table.png

# CHARACTER PAIR       REPLACED WITH
#    #(command)        First line of command’s output
#    #[attributes]     Colour or attribute change
#    #H                Hostname of local host
#    #I                Current window index
#    #P                Current pane index
#    #S                Session name
#    #T                Current window title
#    #W                Current window name
#    ##                A literal ‘#’

# Variables used in time format
# Source: http://docs.splunk.com/Documentation/Splunk/5.0.2/SearchReference/Commontimeformatvariables
# %y = year in numbers (2-digit)
# %Y = year in numbers (4-digit)
# %m = month in number (eg: 12)
    # %B = full month name (eg: December)sho
# %b = short month name (eg: Dec)
# %d = day in numbers, with leading zeros (eg: 08)
# %e = day in numbers, no leading zeros (eg: 8)
# %A = full weekday name (eg: Sunday)
# %a = short weekday name (eg: Sun)
# %H = hours in 24-clock, with leading zeros
# %k = hours in 24-clock, no leading zeros
# %l = hours in 12-clock, with leading zeros
# %p = am/pm
# %T = time in 24-hour notation (%H:%M:%S)

# PREFIX ? : list-keys, display key bindings

# In command-prompt: show-options -g shows the global options
# In command-prompt: show-window-options -g shows the global windows options

# How do I know which tmux version I am running?
# tmux -V

# How to set bindings that don't need the prefix?
#   bind -n      .. or
#   bind -T root ..

# Changelog: https://github.com/tmux/tmux/blob/master/CHANGES

# style colors: default, black, red, green, yellow, blue, magenta, cyan, white,
#               colour0-colour255, hexadecimal RGB string '#ffffff'
# Use $SCRIPTS/bash/256-colors.sh to figure out the color number you want
# style attributes: none, bold/bright, dim, underscore, blink, reverse, hidden,
#                   or italics

# https://www.reddit.com/r/tmux/comments/3paqoi/tmux_21_has_been_released/cw552qd

# tmux buffers
# PREFIX # : List all paste buffers
# PREFIX - : Delete the most recently copied buffer of text
# PREFIX = : Choose which buffer to paste interactively from a list
# PREFIX ] : Paste the most recently copied buffer of text

# How to start a temporary tmux server in addition to an existing running one?
# > tmux -L temp

# In a shell environment in a terminal in tmux, the env var $TMUX will be
# defined to something like "/tmp/tmux-23273/default,31101,0". Outside tmux,
# $TMUX will be undefined.

# Notation to address a specific pane
# SESSION_NAME:WINDOW_INDEX.PANE_NUMBER (Example: foo:2.1 i.e. Pane 1 in Window 2 of Session foo)

# To print a message containing tmux variable values to stdout use '-p' option in display-message
#   tmux display-message -p '#{session_name}:#{window_name}.#{pane_index}', or
#   tmux display -p '#{session_name}:#{window_name}.#{pane_index}'