| sysvinit (2.88dsf) UNRELEASED; urgency=low |
| |
| [ Petter Reinholdtsen ] |
| * Mention new home on Savannah in README. |
| * Revert change from Fedora/RedHat where the now obsolete command |
| INIT_CMD_CHANGECONS was introduced. Based on feedback and patch |
| from Bill Nottingham. |
| * Adjust makefile to make sure the install directories are created |
| before files are copied into them. |
| * Simplify build rules, based on patch from Mike Frysinger and Gentoo. |
| * Fix minor bug in optimizing of argument parsing. Based on |
| report from jakemus on freshmeat. |
| * Add casts to get rid of compiler warning about signed/unsigned issues. |
| * Change tty handling in init to make sure the UTF-8 flag is not cleared |
| on boot. Patch from Samuel Thibault. |
| * Add Makefile in toplevel directory. |
| * Print usage information when shutdown is used by non-root user. |
| Patch from Mike Frysinger and Gentoo. |
| * Sync shutdown manual page and usage information. Patch from Mike |
| Frysinger and Gentoo. |
| * Fix race condition in utmp writing. Patch from Gil Kloepfer via |
| Mike Frysinger and Gentoo. |
| * Rewrite findtty() in bootlogd to recursively search /dev/ for the |
| correct device, to handle terminal devices for example in /dev/pty/. |
| Patch from Debian. |
| * Make sure bootlogd findpty() returns an error value when it fails to |
| find a usable pty. Patch from Rob Leslie via Debian. |
| * Make sure bootlogd fflush() every line, even if asked not to flush |
| to disk using fdatasync(). Patch from Scott Gifford via Debian. |
| |
| [ Werner Fink ] |
| * Add the comment from Andrea Arcangeli about the correct |
| place of setting the default childhandler within spawn(). |
| * Make sure that newline is printed out for last(1) even |
| if an utmp record entry is truncated. |
| * Check if utmp not only exists but also is writable and delay |
| writing out of the utmp runlevel record if utmp is not writable. |
| * Be able to find libcrypt also on 64 bit based architectures. |
| * Add option -w to the last command to display the full user and |
| domain names in the output. Patch from Petr Lautrbach. |
| * Add a manual page for utmpdump as this tool is sometimes |
| very useful even if not intended for normal use. |
| * Use paths.h macros for wall |
| * Change path "/etc/powerstatus" to "/var/run/powerstatus" |
| * Detected also removable block devices at halt/reboot to be able |
| to flush data and send them the ATA standby command. This should |
| avoid data loss on USB sticks and other removable block devices. |
| * Flush block devices on halt/reboot if not done by the kernel. |
| * Set SHELL to /bin/sh in the environmant of shutdown. |
| * Retry to write out shutdown messages if interrupted. |
| * pidof/killall5 - make omit pid list a dynamic one. |
| * pidof - provide '-n' to skip stat(2) syscall on network based FS. |
| * init - avoid compiler warnings |
| * init - initialize console by using the macros from ttydefaults.h |
| * init - add the possiblity to ignore further interrupts from keyboard |
| * init - add the possiblity to set sane terminal line settings |
| * sulogin - add the possibility to reset the terminal io |
| * Fix some minor problems |
| * init - enable is_selinux_enabled() to detect selinuxfs |
| * Add fix for Debian bug #536574 -- Can be enabled by -DACCTON_OFF |
| * Add helper program fstab-decode to make it easier to handle |
| /etc/mtab content. Patch by Miloslav Trmac and Fedora. |
| * Add fix for Debian bug #335023 - Make sure TERM is set on FreeBSD. |
| * Add fix for Debian bug #374038 - Make it clear that shutdown -c can |
| only cancel a waiting shutdown, not an active one. |
| * Add note to pidof manual page about the use of readlink(2). Patch by |
| Bill Nottingham and Fedora. |
| * Add changes for Debian bug #68621 - Add PAM support for programs spawned |
| by init on the console like sulogin. Based on patch by Topi Miettinen. |
| * Test out PAM support, extend PAM support by providing environment |
| is specified by /etc/pam.d/init |
| * Move utmp/wtmp before the execvp() in spawn() to be sure to |
| use the correct pid even on a controlling tty |
| * Remaining problem is that the pid of the second fork() for |
| getting a controlling tty isn't that reported by spawn() |
| * Re-enable writting utmp/wtmp for boot scripts |
| * Provide a simply /etc/pam.d/init as without it will not work (sigh!) |
| * Extend sulogin to support additional encryption algorithms |
| * Re-enable maintenance message of sulogin |
| * Remove PAM session start part from init as sulogin do not use |
| and will not use a PAM conv() function. The current sulogin |
| is able to handle DES as well as MD5, SHA, and Blowfish encrypted |
| passwords due using getpwnam(3). |
| * Enable the sulogin fallback password check to handle MD5, SHA, and |
| Blowfish encrypted passwords in case of getpwnam(3) fails. |
| * sulogin picking the SELinux context was broken. Patch by Daniel Walsh |
| |
| -- Petter Reinholdtsen <pere@hungry.com> Sun, 12 Jul 2009 19:58:10 +0200 |
| |
| sysvinit (2.87dsf) world; urgency=low |
| |
| * Fix typos and do minor updates in the manual pages. |
| * Correct section of mountpoint(1). |
| * Document -e and -t options for telinit in init(8). |
| * Update address of FSF in the COPYRIGHT file. |
| * Document in halt(8) that -n might not disable all syncing. |
| Patch by Bill Nottingham and Fedora |
| * Adjust output from "last -x". In reboot lines, print endpoint |
| of uptime too. In shutdown lines print downtimes rather than |
| the time between downs. Fix typo in string compare in last.c. |
| Patch by Thomas Hood. |
| * Improve handling of IPv6 addresses in last. Patch from Fedora. |
| * Document last options in usage information, previously only |
| mentioned in the manual page. |
| * Add new option -F to last, to output full date string instead |
| of the short form provided by default. Patch from Olaf Dabrunz |
| and SuSe. |
| * Adjust build rules to make sure the installed binaries |
| are stripped. |
| * Increase the compiler warning level when building. |
| * Fix utmp/wtmp updating on 64-bit platforms. Patch by Bill |
| Nottingham and Fedora. |
| * Avoid unchecked return value from malloc() in utmpdump. |
| Patch from Christian 'Dr. Disk' Hechelmann and Fedora. |
| * Make sure to use execle and no execl when passing environment to |
| the new process. Patch from RedHat. |
| * Correct init to make sure the waiting status is preserved across |
| re-exec. Patch from RedHat. |
| * Correct init to avoid race condition when starting programs during |
| boot. Patch from SuSe. |
| * Allow 'telinit u' in runlevels 0 and 6. Patch from Thomas Hood. |
| * Change install rules to make pidof an absolute symlink. Patch from |
| Thomas Hood. |
| * Improve error message from init if fork() fail. Patch found in Suse. |
| * Add support for SE Linux capability handling. Patch from Manoj |
| Srivastava, adjusted to avoid aborting if SE policy was loaded in |
| the initrd with patch from Bill Nottingham and Fedora. |
| * Add -c option to pidof for only matching processes with the same |
| process root. Ignore -c when not running as root. Patch from |
| Thomas Woerner and Fedora. |
| * Adjust init to terminate argv0 with one 0 rather than two so that |
| process name can be one character longer. Patch by Kir Kolyshkin. |
| * Make sure bootlogd exit with non-error exit code when forking of |
| the child successfully. |
| * Add bootlogd option -s to make it possible to control the use of |
| fdatasync(). Patch from Thomas Hood. |
| * Add bootlogd option -c to tell it to create the log file if it does |
| not exist. Patch from Thomas Hood. |
| * Let bootlogd also look at ttyB* devices to work on HPPA. Patch |
| from Thomas Hood. |
| * Change init to use setenv() instead of putenv, make sure the PATH |
| value is usable on re-exec. Patch from Thomas Hood. |
| * Add usleep in killall5 after killing processes, to force the kernel |
| to reschedule. Patch from SuSe. |
| * Modify pidof to not print empty line if no pid was found. |
| * Modify init and sulogin to fix emergency mode's tty, making sure ^C |
| and ^Z work when booting with 'emergency' kernel option. Patch from |
| Samuel Thibault. |
| * Modify init to allow some time for failed opens to resolve themselves. |
| Patch from Bill Nottingham and Fedora. |
| * Modify init to shut down IDE, SCSI and SATA disks properly. Patches |
| from Sebastian Reichelt, Werner Fink and SuSe. |
| * Modify wall to use UT_LINESIZE from <utmp.h> instead of hardcoded |
| string lengths. Patch from SuSe. |
| * Change wall to make halt include hostname in output. |
| * Change killall to avoid killing init by mistake. Patch from SuSe. |
| * Change killall5 to use the exit value to report if it found any |
| processes to kill. Patch from Debian. |
| * Add option -o opmitpid to killall5, to make it possible to skip |
| some pids during shutdown. Based on patch from Colin Watson and |
| Ubuntu. |
| * Add references between killall5 and pidof manual pages. Patch from Debian. |
| * Modify killall to work better with user space file system, by |
| changing cwd to /proc when stopping and killing processes, and |
| avoiding stat() when the value isn't used. Also, lock process |
| pages in memory to avoid paging when user processes are stopped. |
| Patch from Debian and Goswin von Brederlow with changes by Kel |
| Modderman. |
| * Change shutdown to only accept flags -H and -P with the -h flag, |
| and document this requirement in the manual page. |
| * Change reboot/halt to work properly when used as a login shell. |
| Patch by Dale R. Worley and Fedora. |
| * Let sulogin fall back to the staticly linked /bin/sash if both roots |
| shell and /bin/sh fail to execute. |
| |
| -- Petter Reinholdtsen <pere@hungry.com> Sun, 12 Jul 2009 19:58:10 +0200 |
| |
| sysvinit (2.86) cistron; urgency=low |
| |
| * Fixed up bootlogd to read /proc/cmdline. Also keep an internal |
| linebuffer to process \r, \t and ^H. It is becoming useable. |
| * Applied trivial OWL patches |
| * Block signals in syslog(), since syslog() is not re-entrant |
| (James Olin Oden <joden@malachi.lee.k12.nc.us>, redhat bug #97534) |
| * Minor adjustements so that sysvinit compiles on the Hurd |
| * killall5 now skips kernel threads |
| * Inittab entries with both 'S' and other runlevels were broken. |
| Fix by Bryan Kadzban <bryan@kadzban.is-a-geek.net> |
| * Changed initreq.h to be more flexible and forwards-compatible. |
| * You can now through /dev/initctl set environment variables in |
| init that will be inherited by its children. For now, only |
| variables prefixed with INIT_ can be set and the maximum is |
| 16 variables. There's also a length limit due to the size |
| of struct init_request, so it should be safe from abuse. |
| * Option -P and -H to shutdown set INIT_HALT=POWERDOWN and |
| INIT_HALT=HALT as environment variables as described above |
| * Add "mountpoint" utility. |
| * Slightly better algorithm in killall5.c:pidof() |
| * Added some patches from fedora-core (halt-usage, last -t, |
| sulogin-message, user-console) |
| |
| -- Miquel van Smoorenburg <miquels@cistron.nl> Fri, 30 Jul 2004 14:14:58 +0200 |
| |
| sysvinit (2.85) cistron; urgency=low |
| |
| * Add IPv6 support in last(1) |
| * Sulogin: even if the root password is empty, ask for a password- |
| otherwise there is no way to set a timeout. |
| * Removed support for ioctl.save. |
| * Turned of support for /etc/initrunlvl and /var/run/initrunlvl |
| * Fixed warts in dowall.c ("Dmitry V. Levin" <ldv@altlinux.org>) |
| * Fix init.c::spawn(). The "f" variable was used both as file descriptor |
| and waitpid(2) return code. In certain circumstances, this leads to |
| TIOCSCTTY with wrong file descriptor (Vladimir N. Oleynik). |
| * Fix fd leak in sulogin (Dmitry V. Levin). |
| * More error checking in all wait() calling code (Dmitry V. Levin). |
| * Fix argv[] initialization in spawn() (Dmitry V. Levin). |
| * Change strncpy to strncat in most places (Dmitry V. Levin). |
| |
| -- Miquel van Smoorenburg <miquels@cistron.nl> Tue, 15 Apr 2003 16:37:57 +0200 |
| |
| sysvinit (2.84) cistron; urgency=low |
| |
| * Don't use /etc/initlvl interface for telinit; only use /dev/initctl, |
| and give a clear error when that fails. |
| * Add -i/--init command line flag to init - this tells init |
| 'behave as system init even if you're not PID#1'. Useful for |
| testing in chroot/jail type environments. |
| |
| -- Miquel van Smoorenburg <miquels@cistron.nl> Tue, 27 Nov 2001 13:10:08 +0100 |
| |
| sysvinit (2.83) cistron; urgency=low |
| |
| * Fix bug in shutdown where it didn't check correctly for a |
| virtual console when checking /etc/shutdown.allow |
| * Fix race condition in waitpid() [Andrea Arcangeli] |
| * Call closelog() after openlog()/syslog() since recent libc's |
| keep the logging fd open and that is fd#0 aka stdin. |
| |
| -- Miquel van Smoorenburg <miquels@cistron.nl> Tue, 2 Oct 2001 23:27:06 +0200 |
| |
| sysvinit (2.82) cistron; urgency=low |
| |
| * Print out correct version number at startup. |
| * Fix spelling of initttab in init(8) |
| |
| -- Miquel van Smoorenburg <miquels@cistron.nl> Thu, 23 Aug 2001 17:50:44 +0200 |
| |
| sysvinit (2.81) cistron; urgency=low |
| |
| * Fix typo/bug in killall5/pidof, -o option failed to work since 2.79. |
| Reformatted source code to prevent this from happening again. |
| * shutdown.8: applied redhat manpage update |
| * sulogin: applied redhat sysvinit-2.78-sulogin-nologin.patch |
| * sulogin: applied redhat sysvinit-2.78-notty.patch |
| * sulogin: applied redhat sysvinit-2.78-sigint.patch |
| |
| sysvinit (2.80) cistron; urgency=low |
| |
| * Grammar/spelling fixes in shutdown.c (Christian Steinrueck) |
| * Don't set controlling tty for non-(sysinit,boot,single) runlevels |
| |
| -- Miquel van Smoorenburg <miquels@cistron.nl> Thu, 26 Jul 2001 13:26:56 +0200 |
| |
| sysvinit (2.79) cistron; urgency=low |
| |
| * New upstream version |
| * several fixes to wall by Tim Robbins <fyre@box3n.gumbynet.org> |
| * Several extra boundary checks by Solar Designer |
| * Make /dev/console controlling tty |
| * Stricter checks on ownership of tty by mesg(1) |
| * Documented and restricted -n option to wall(1) |
| * Make it compile with glibc 2.2.2 |
| * Document IO redirection in wall manpage (closes: #79491) |
| * Update README (closes: #85650) |
| * Fix init.8 manpage (closes: #75268) |
| * Fix typo in halt(8) manpage (closes: #67875) |
| * Check time argument of shutdown(8) for correctness (closes: #67825) |
| * Check for stale sessions in last(1) (Chris Wolf <cwolf@starclass.com>) |
| |
| -- Miquel van Smoorenburg <miquels@cistron.nl> Wed, 4 Jul 2001 15:04:36 +0200 |
| |
| sysvinit (2.78-2) frozen unstable; urgency=high |
| |
| * Change "booting" to "reloading" message at reload |
| * Add "-z xxx" dummy command line argument (closes: #54717) |
| |
| -- Miquel van Smoorenburg <miquels@cistron.nl> Fri, 11 Feb 2000 12:17:54 +0100 |
| |
| sysvinit (2.78-1) unstable; urgency=low |
| |
| * 2.78 will be the new upstream version, I'm skipping 2.77 |
| * Shutdown now calls sync before switching the runlevel to 0 or 6, |
| or before unmounting filesystems if -n was used (closes: #46461) |
| * Some cosmetic changes to init.c (closes: #32079) |
| |
| -- Miquel van Smoorenburg <miquels@cistron.nl> Thu, 30 Dec 1999 20:40:23 +0100 |
| |
| sysvinit (2.77-2) unstable; urgency=low |
| |
| * Fix last -i option |
| |
| -- Miquel van Smoorenburg <miquels@cistron.nl> Tue, 5 Oct 1999 21:51:50 +0200 |
| |
| sysvinit (2.77-1) unstable; urgency=low |
| |
| * Write reboot record into utmp file as well to make rms happy |
| * Fork and dump core in / if SIGSEGV is received for debugging purposes |
| * Patch by Craig Sanders <cas@vicnet.net.au> for "last" -i option |
| |
| -- Miquel van Smoorenburg <miquels@cistron.nl> Wed, 4 Aug 1999 11:16:23 +0200 |
| |
| sysvinit (2.76-4) unstable; urgency=low |
| |
| * Change dowall.c to handle Unix98 ptys correctly |
| * Add comment in rcS about usage of setup.sh and unconfigured.sh |
| * Shutdown now removes nologin file just before calling telinit |
| * SEGV handler now tries to continue after sleep of 30 seconds. |
| On a 386-class processor it also prints out the value of EIP. |
| * Fix for racecondition in check_init_fifo() by Richard Gooch |
| |
| -- Miquel van Smoorenburg <miquels@cistron.nl> Sat, 8 May 1999 17:22:57 +0200 |
| |
| sysvinit (2.76-3) frozen unstable; urgency=high |
| |
| * Small bugfix to last.c courtesy of Danek Duvall <duvall@emufarm.ml.org> |
| |
| -- Miquel van Smoorenburg <miquels@cistron.nl> Tue, 12 Jan 1999 12:12:44 +0100 |
| |
| sysvinit (2.76-1) frozen unstable; urgency=high |
| |
| * Fix bug in check_pipe() which crashes init on the Alpha. |
| |
| -- Miquel van Smoorenburg <miquels@cistron.nl> Tue, 3 Nov 1998 11:09:13 +0100 |
| |
| sysvinit (2.75-4) unstable; urgency=low |
| |
| * Change sulogin password buffer to 128 characters. |
| * Don't print control characters in dowall.c |
| * Try to open getenv ("CONSOLE"), /dev/console and /dev/tty0 in order. |
| For backwards compatibility when you try to boot a 2.0.x kernel |
| with a linux > 2.1.70 /dev/console device. |
| * Change src/Makefile for non-debian systems (mainly, RedHat) |
| * Try to create /dev/initctl if not present; check every time to see |
| if the dev/ino of /dev/initctl has changed and re-open it. This should |
| help devfs a bit. |
| * Send SIGUSR1 to init at bootup to let it re-open /dev/initctl; |
| again in support of devfs. |
| * Moved pidof to /bin (it's only a link to killall5 anyway) |
| |
| -- Miquel van Smoorenburg <miquels@cistron.nl> Mon, 5 Oct 1998 14:03:14 +0200 |
| |
| sysvinit (2.75-2) frozen unstable; urgency=medium |
| |
| * Fix last.c again. |
| * Add check to see if /dev/initctl is really a FIFO |
| * In ifdown.c first down all shaper devices then the real devices |
| |
| -- Miquel van Smoorenburg <miquels@cistron.nl> Tue, 2 Jun 1998 22:43:01 +0200 |
| |
| sysvinit (2.75-1) frozen unstable; urgency=low |
| |
| * Rewrote last.c to be much more memory friendly and correct, |
| thanks to Nick Andrew <nick@zeta.org.au> and |
| David Parrish <dparrish@zeta.org.au> |
| * Fixes bugs: |
| #21616: sysvinit: sulogin thinks md5 root password is bad |
| #21765: sysvinit: Typo in `killall5.c' |
| #21775: sysvinit: sysvinit does not support MD5 hashed passwords |
| #21990: /usr/bin/last: unnecessary memset and off-by-one bug |
| #22084: sysvinit 2.74-4: SIGPWR missing on sparc |
| #21900: init, powerfail events, and shutdown.allow |
| #21702: init 0 does not work as expected... |
| #21728: sysvinit: Typo in `init.c' |
| #22363: sysvinit: discrepance btw. manpage and /sbin/init |
| |
| -- Miquel van Smoorenburg <miquels@cistron.nl> Tue, 19 May 1998 11:02:29 +0200 |
| |
| sysvinit (2.74-4) frozen unstable; urgency=medium |
| |
| * Add -o option to last to process libc5 utmp files. |
| * Buffer overflow fixed in init.c (not very serious; only exploitable |
| by root). Thanks to Chris Evans <chris@ferret.lmh.ox.ac.uk> |
| |
| -- Miquel van Smoorenburg <miquels@cistron.nl> Wed, 15 Apr 1998 17:04:33 +0200 |
| |
| sysvinit (2.74-1) unstable; urgency=low |
| |
| * Should compile with glibc 1.99 :) |
| * Change behaviour of reboot(1) and halt(1) so that the default when |
| the runlevel can't be determined is to call shutdown. |
| * Added re-exec patch from Al Viro (21 Feb 1998): |
| 'U' flag added to telinit. It forces init to re-exec itself |
| (passing its state through exec, certainly). |
| May be useful for smoother (heh) upgrades. |
| 24 Feb 1998, AV: |
| did_boot made global and added to state - thanks, Miquel. |
| Yet another file descriptors leak - close state pipe if |
| re_exec fails. |
| |
| -- Miquel van Smoorenburg <miquels@cistron.nl> Thu, 12 Mar 1998 17:42:46 +0100 |
| |
| sysvinit (2.73-2) unstable; urgency=low |
| |
| * Change _NSIG to NSIG for 2.1.x kernel includes. |
| |
| -- Miquel van Smoorenburg <miquels@cistron.nl> Thu, 8 Jan 1998 16:01:02 +0100 |
| |
| sysvinit (2.73-1) unstable; urgency=low |
| |
| * Use siginterrupt, now that system calls are restarted by default. |
| Main symptom was that the sulogin timeout didn't work but there |
| might have been more hidden problems. |
| * Kill process immidiately if turned off in inittab |
| * Fixed sulogin check on tty arg. |
| * Use strerror() instead of sys_errlist |
| * wall now supports a '-n' option to suppress [most of] the banner. |
| Debian doesn't use sysvinit's wall, but apparently Redhat does. |
| * Add '-F' (forcefsck) option to shutdown |
| * Close and reopen /dev/initctl on SIGUSR1 (mainly for a /dev in ram) |
| |
| -- Miquel van Smoorenburg <miquels@cistron.nl> Sat, 3 Jan 1998 16:32:39 +0100 |
| |
| sysvinit (2.72-3) unstable; urgency=low |
| |
| * Add extra fork() in dowall.c to avoid hanging in rare cases |
| |
| -- Miquel van Smoorenburg <miquels@cistron.nl> Wed, 22 Oct 1997 14:44:00 +0200 |
| |
| sysvinit (2.72) unstable; urgency=low |
| |
| * Applied manual page patches by Bill Hawes <whawes@star.net>. Thanks Bill! |
| * Applied patches to the sample Slackware scripts by |
| "Jonathan I. Kamens" <jik@kamens.brookline.ma.us> |
| * Fix halt and reboot runlevels 0 & 6 check. |
| * Only say "no more processes left in runlevel x" once |
| * Fix race condition with SIGCHLD in spawn() |
| (thanks to Alon Ziv <alonz@CS.Technion.AC.IL>) |
| * Compress all manpages (missed 2) |
| * Compiled for libc6 |
| * Added poweroff patch by Roderich Schupp <rsch@ExperTeam.de> |
| |
| -- Miquel van Smoorenburg <miquels@cistron.nl> Sun, 12 Oct 1997 17:20:17 +0200 |
| |
| sysvinit (2.71-2) frozen unstable; urgency=low |
| |
| * Print 2.71 instead of 2.70 on startup :) |
| |
| -- Miquel van Smoorenburg <miquels@cistron.nl> Mon, 5 May 1997 12:45:25 +0200 |
| |
| sysvinit (2.71-1) frozen unstable; urgency=high |
| |
| * Added code for updwtmp() in utmp.c for glibc (2.0.3) |
| * Fixed all programs to use functions from utmp.c and getutent() |
| * Do not try to clean up utmp in init itself (Bug#9022) |
| * Removed sync() from main loop. |
| * Hopefully fixes bug #8657 (shutdown signal handling) |
| |
| -- Miquel van Smoorenburg <miquels@cistron.nl> Sat, 26 Apr 1997 19:57:27 +0200 |
| |
| sysvinit (2.70-1) unstable; urgency=low |
| |
| * Respawn fix |
| * Removed StUdLy CaPs from source code |
| * Moved files in source archive around |
| * Fixes for glibc (utmp handling, signal handling). |
| * Fixed '-d' option to last (now also works without '-a'). |
| * Added extra checking in last.c to prevent showing dead entries |
| |
| -- Miquel van Smoorenburg <miquels@cistron.nl> Fri, 7 Feb 1997 15:31:30 +0100 |
| |
| sysvinit (2.69-1) frozen unstable; urgency=medium |
| |
| * Fixed bug that can throw X in a loop (or any other app that reads from |
| /dev/tty0) |
| |
| -- Miquel van Smoorenburg <miquels@cistron.nl> Sun, 1 Dec 1996 15:32:24 +0100 |
| |
| sysvinit (2.67-1) frozen unstable; urgency=high |
| |
| * Fixes problem with /dev/console being controlling terminal of some |
| daemons |
| * Puts copyright file in the right place |
| |
| -- Miquel van Smoorenburg <miquels@cistron.nl> Fri, 15 Nov 1996 12:23:33 +0100 |
| |
| sysvinit (2.66-1) unstable; urgency=medium |
| |
| * Skipped 2.65. A development 2.65 got out by accident and is apparently |
| being used.. |
| * Also compiles and runs with GNU libc (and on the Alpha) |
| * Fixed dowall.c not to exit when getpwuid() fails and uid == 0. |
| * Fixed init panic'ing on empty lines in /etc/inittab |
| * Changed default PATH to include /usr/local/sbin |
| * Set /dev/console as controlling terminal for sysinit,bootwait,wait,powerwait |
| This allows using ^C to interrupt some parts of eg the boot process. |
| * Remove old symlink in /var/log/initlvl; let init check both |
| /var/log and /etc itself. |
| |
| -- Miquel van Smoorenburg <miquels@cistron.nl> Tue, 29 Oct 1996 13:46:54 +0100 |
| |
| 2.66 29-Oct-1996 |
| - Skipped 2.65. A development 2.65 got out by accident and is apparently |
| being used.. |
| - Fixed dowall.c not to exit when getpwuid() fails and uid == 0. |
| - Fixed init panic'ing on empty lines in /etc/inittab |
| - Changed default PATH to include /usr/local/sbin |
| - Ported to Linux/Alpha and GNU libc. |
| - Set /dev/console as controlling terminal for sysinit,bootwait,wait,powerwait. |
| This allows using ^C to interrupt some parts of eg the boot process. |
| - Remove old symlink in /var/log/initlvl; let init check both |
| /var/log and /etc itself. |
| |
| 2.64 28-Jun-1996 |
| - Init checks CONSOLE environment variable on startup (overrides /dev/console) |
| - Init sets CONSOLE variable for all its children. |
| - Wtmp(): when zeroing out old utmp entries, keep ut_id field |
| - Wtmp(): try to re-use ut_id field if possible. |
| - SetTerm(): only read from /etc/ioctl.save if written once. |
| - Included start-stop-daemon, C version (source only). |
| - Fixed wait() for the emergency shell. |
| - killall5: ignore signal before doing kill(-1, pid). |
| |
| 2.63 14-Jun-1996 |
| - Fixed preinst script for Debian |
| - Fixed init.c to become init daemon if name is init.new |
| - Fixed pidof to not return PIDs of shell scripts |
| |
| 2.62-2 09-Jun-1996 |
| - Changed debian /etc/init.d/boot script to create a nologin file |
| at boot and to remove it just before going multiuser. |
| |
| 2.62 31-May-1996 |
| - Decided to release a 2.62 version with a BIG WARNING about upgrading |
| init in it. Will send a patch to Linus for the linux/Documentation/Changes |
| file so that 2.62 or later is mentioned as the version to upgrade to. |
| - Added docs for Slackware |
| |
| 2.61-3 29-May-1996 |
| - Fixed debian/etc/init.d/network for the lo device. |
| - Added "-xdev" to the cd /tmp && find in debian/etc/init.d/boot |
| - Made remove time for files in /tmp configurable. |
| |
| 2.61 29-Apr-1996 |
| - Changed /etc/init.d/boot script again |
| - Fixed problem in init.c with trailing whitespace after entries in inittab |
| - Fixed killall5 problems |
| - Added manpage for lastb |
| - Added SHELL= environment variable to sulogin |
| - Fixed sulogin & shadow problems |
| - Added timeout option to sulogin |
| |
| 2.60-2 16-Apr-1996 |
| - Fixed sulogin (didn't work if root wasn't first entry in shadow file) |
| - Fixed mesg for systems with "tty" group (such as Debian) |
| - Fixed nsyslog() in killall5.c |
| |
| 2.60 01-Apr-1996 |
| - Fixed race condition in init.c, resulting in hanging shutdowns. |
| Courtesy of Max Neunhoeffer <Max.Neunhoeffer@urz.uni-heidelberg.de>. |
| - Fixed debian/etc/init.d/boot for swapon and mdadd |
| - Added architecture to debian.control |
| - Added manpages for rc.boot and rc.local |
| - Updated inittab manpage for 4-character runlevel field |
| - Added debian replaces for bsdutils < version_without_mesg |
| - Fixed init.c so that it also works with kernels 1.3.81 and up |
| |
| 2.59 10-Mar-1996 |
| - Init logs less to syslog (suspected to hang in syslog() or openlog() ) |
| - removed closelog() from init.c |
| - removed time check of runlevel record in halt. |
| - Added options to last to get hostname from ut_addr field |
| - Added last and mesg to installation targets |
| - rewrote /etc/init.d/boot a bit. |
| |
| 2.58-2 04-Jan-1996 |
| - Changed etc/init.d/rc to do a stty onlcr |
| - Added /var/log/initrunlvl symlink |
| |
| 2.58-1 31-Dec-1995 |
| - Added the latest debian files. |
| - Added support for 4-character id fields (if you have libc5). |
| - Fixed pidof (in killall5) parsing of /proc/.../stat |
| - Save restore GMT setting in /etc/init.d/boot |
| |
| 2.57d 03-Dec-1995 |
| - Added sulogin |
| - Added "-b" flag to init, gives a shell before |
| anything else (in case the startup scripts are screwed) |
| - Moved fastboot to /fastboot |
| - Folded in Debian patches. |
| - Removed old scripts |
| - Added debian /etc/directory. |
| |
| 2.57c 08-Oct-1995 |
| - Changed over to init_request (with initreq.h) |
| - Processes no longer killed when "process" field |
| changes, change takes effect after next respawn. |
| |
| 2.57b xx-Aug-1995 |
| - Bugfix release for Debian and Slackware 3.0 |
| |
| 2.57a 10-Jul-1995 |
| - Fixed race condition init init.c wrt got_chld |
| - Fixed one-off for malloc in killall5.c |
| - Changed dowall.c |
| - Console code: no relink to /dev/systty on CTRL-ALT-DEL) |
| |
| 2.57 22-May-1995 |
| - Changed a few things here and there, didn't |
| really document it :) |
| |
| 2.55 17-Jan-1995 |
| - Added option to shutdown to run standalone. |
| |
| 2.54 12-Jan-1995 |
| - Added GNU copyrigh to all *.[ch] files. |
| - added /etc/initscript |
| - reboot and halt now call shutdown in runlevels 1-5 |
| - Can run from read-only root (CDROM) |
| |
| 2.53 10-Oct-1994 |
| - Renamed pidof to killall5, updated all scripts to |
| use killall5 instead of kill -1 .... |
| - Rewrote scripts to use this, and some general changes. |
| - Added SysV command line compatibility to shutdown. |
| |
| 2.52 30-Aug-1994 |
| - Added `powerfailnow' keyword, for when UPS battery is low. |
| - Updated `last'. |
| - Fixed utmp handling (wrt. CLEAN_UTMP) |
| TODO: |
| * Make last compatible with GNU/BSD (long options?) |
| * update powerd |
| * remote SIGPWR broadcast? in powerd? (with priv. port) |
| * remote shutdown |
| |
| 2.50 14-Feb-1994 |
| - Ignores unknown command line arguments. |
| - Modelled more after the "real" sysVinit |
| - Lots of changes all over the place. |
| (like showing runlevel in "ps" listing, logging |
| runlevel into utmp file etc) |
| - now using "reliable" signals instead of V7 style. |
| - Updated all scripts. Examples are in two directories: |
| etc (normal) and etc-sysv (sysv style scripts). |
| - runlevel 0 = halt, 1 = single user, 6 = reboot. |
| - added support for serial console. |
| - updated Propaganda, manpages. |
| - added shutdown access control. |
| |
| 2.4 24-May-93 |
| - Send out the official version into the world as |
| SysVinit-2.4.tar.z. |
| |
| 2.4g 15-May-93 |
| - Changed init to really catch SIGPWR 'cause we |
| hooked up an UPS to the Linux machine. The |
| keyword for catching the TreeFingerSalute is |
| now "ctrlaltdel" instead of "power{wait,fail}". |
| |
| 2.4a 22-Apr-93 |
| - Fixed last to reckognize BSD style wtmp logging. |
| - Changed init to write wtmp records that are |
| SysV compliant but are also reckognized by the |
| BSD last. Added a '+' option to the 'process' |
| field of inittab, for getties that want to do |
| their own utmp/wtmp housekeeping (kludge!). |
| - Now accepts a runlevel on the command line, |
| and reckognizes the 'auto' argument. (Sets the |
| environment variable AUTOBOOT to YES) |
| |
| 2.2.3 24-Mar-93 |
| - Ripped out the 'leave' action. To difficult, and |
| unneeded. |
| - Going single user now kills _all_ processes. |
| - Added '-t secs' option to all commands. |
| - This version is stable enough to post. |
| |
| 2.2 02-Mar-93 |
| - Made wait()'s asynchronous |
| - Changed whole thing to one big state machine |
| - Now using 'pseudo levels' # & * for SYSINIT & BOOT |
| - Added a new type of 'action', called leave. This |
| process will be executed when the system goes from a |
| runlevel specified in it's runlevel field to a |
| level that's not. Nice to bring down NFS and the like. |
| |
| 2.1 28-Jan-93 |
| - Fixed a bug with 'boot' and 'once'. |
| - Check 'initdefault' for validity. |
| - Reckognizes "single" as command line argument. |
| - Retries execvp with 'sh -c exec ..' if command |
| is a shell script. (shouldn't execvp do this?) |
| - Added patches to use syslog if defined. |
| |
| 2.0 08-Dec-92 |
| - Rewrote the code totally, so started with a new |
| version number. |
| - Dropped Minix support, this code now is Linux - specific. |
| - With TEST switch on, this init & telinit can |
| run standalone for test purposes. |
| |
| 1.3, 05-Jul-92 |
| - Got a 386, so installed Linux. Added 'soft' reboot |
| to be default under linux. Fixed some typos. |
| |
| 1.2, 16-Jun-92 |
| - Bugreport from Michael Haardt ; removed deadlock |
| and added 'waitpid' instead of 'wait' for SYSV. |
| |
| 1.1, 30-Apr-92 |
| - Read manual wrong: there is no 'action' field called |
| process, but all entries are of type process. Every |
| 'process' get exec'ed by /bin/sh -c 'exec command'. |
| - Rapidly respawning processes are caught in the act. |
| - _SYSV support is really Linux support, |
| done by poe@daimi.aau.dk on 25-Mar-92. |
| |
| 1.0, 01-Feb-92 |
| - Initial version, very primitive for the Minix |
| operating system. Required some mods. to the |
| kernel. |
| |