| /*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/ |
| |
| /*** |
| This file is part of systemd. |
| |
| Copyright 2010 Lennart Poettering |
| |
| systemd is free software; you can redistribute it and/or modify it |
| under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| systemd is distributed in the hope that it will be useful, but |
| WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with systemd; If not, see <http://www.gnu.org/licenses/>. |
| ***/ |
| |
| #include <errno.h> |
| #include <signal.h> |
| #include <dirent.h> |
| #include <unistd.h> |
| |
| #include "unit.h" |
| #include "service.h" |
| #include "load-fragment.h" |
| #include "load-dropin.h" |
| #include "log.h" |
| #include "strv.h" |
| #include "unit-name.h" |
| #include "dbus-service.h" |
| #include "special.h" |
| #include "bus-errors.h" |
| #include "exit-status.h" |
| #include "def.h" |
| #include "util.h" |
| |
| #ifdef HAVE_SYSV_COMPAT |
| |
| #define DEFAULT_SYSV_TIMEOUT_USEC (5*USEC_PER_MINUTE) |
| |
| typedef enum RunlevelType { |
| RUNLEVEL_UP, |
| RUNLEVEL_DOWN, |
| RUNLEVEL_SYSINIT |
| } RunlevelType; |
| |
| static const struct { |
| const char *path; |
| const char *target; |
| const RunlevelType type; |
| } rcnd_table[] = { |
| /* Standard SysV runlevels for start-up */ |
| { "rc1.d", SPECIAL_RESCUE_TARGET, RUNLEVEL_UP }, |
| { "rc2.d", SPECIAL_RUNLEVEL2_TARGET, RUNLEVEL_UP }, |
| { "rc3.d", SPECIAL_RUNLEVEL3_TARGET, RUNLEVEL_UP }, |
| { "rc4.d", SPECIAL_RUNLEVEL4_TARGET, RUNLEVEL_UP }, |
| { "rc5.d", SPECIAL_RUNLEVEL5_TARGET, RUNLEVEL_UP }, |
| |
| #ifdef TARGET_SUSE |
| /* SUSE style boot.d */ |
| { "boot.d", SPECIAL_SYSINIT_TARGET, RUNLEVEL_SYSINIT }, |
| #endif |
| |
| #if defined(TARGET_DEBIAN) || defined(TARGET_UBUNTU) || defined(TARGET_ANGSTROM) |
| /* Debian style rcS.d */ |
| { "rcS.d", SPECIAL_SYSINIT_TARGET, RUNLEVEL_SYSINIT }, |
| #endif |
| |
| /* Standard SysV runlevels for shutdown */ |
| { "rc0.d", SPECIAL_POWEROFF_TARGET, RUNLEVEL_DOWN }, |
| { "rc6.d", SPECIAL_REBOOT_TARGET, RUNLEVEL_DOWN } |
| |
| /* Note that the order here matters, as we read the |
| directories in this order, and we want to make sure that |
| sysv_start_priority is known when we first load the |
| unit. And that value we only know from S links. Hence |
| UP/SYSINIT must be read before DOWN */ |
| }; |
| |
| #define RUNLEVELS_UP "12345" |
| /* #define RUNLEVELS_DOWN "06" */ |
| /* #define RUNLEVELS_BOOT "bBsS" */ |
| #endif |
| |
| static const UnitActiveState state_translation_table[_SERVICE_STATE_MAX] = { |
| [SERVICE_DEAD] = UNIT_INACTIVE, |
| [SERVICE_START_PRE] = UNIT_ACTIVATING, |
| [SERVICE_START] = UNIT_ACTIVATING, |
| [SERVICE_START_POST] = UNIT_ACTIVATING, |
| [SERVICE_RUNNING] = UNIT_ACTIVE, |
| [SERVICE_EXITED] = UNIT_ACTIVE, |
| [SERVICE_RELOAD] = UNIT_RELOADING, |
| [SERVICE_STOP] = UNIT_DEACTIVATING, |
| [SERVICE_STOP_SIGTERM] = UNIT_DEACTIVATING, |
| [SERVICE_STOP_SIGKILL] = UNIT_DEACTIVATING, |
| [SERVICE_STOP_POST] = UNIT_DEACTIVATING, |
| [SERVICE_FINAL_SIGTERM] = UNIT_DEACTIVATING, |
| [SERVICE_FINAL_SIGKILL] = UNIT_DEACTIVATING, |
| [SERVICE_FAILED] = UNIT_FAILED, |
| [SERVICE_AUTO_RESTART] = UNIT_ACTIVATING |
| }; |
| |
| static void service_init(Unit *u) { |
| Service *s = SERVICE(u); |
| |
| assert(u); |
| assert(u->meta.load_state == UNIT_STUB); |
| |
| s->timeout_usec = DEFAULT_TIMEOUT_USEC; |
| s->restart_usec = DEFAULT_RESTART_USEC; |
| s->timer_watch.type = WATCH_INVALID; |
| #ifdef HAVE_SYSV_COMPAT |
| s->sysv_start_priority = -1; |
| s->sysv_start_priority_from_rcnd = -1; |
| #endif |
| s->socket_fd = -1; |
| s->guess_main_pid = true; |
| |
| exec_context_init(&s->exec_context); |
| |
| RATELIMIT_INIT(s->ratelimit, 10*USEC_PER_SEC, 5); |
| |
| s->control_command_id = _SERVICE_EXEC_COMMAND_INVALID; |
| } |
| |
| static void service_unwatch_control_pid(Service *s) { |
| assert(s); |
| |
| if (s->control_pid <= 0) |
| return; |
| |
| unit_unwatch_pid(UNIT(s), s->control_pid); |
| s->control_pid = 0; |
| } |
| |
| static void service_unwatch_main_pid(Service *s) { |
| assert(s); |
| |
| if (s->main_pid <= 0) |
| return; |
| |
| unit_unwatch_pid(UNIT(s), s->main_pid); |
| s->main_pid = 0; |
| } |
| |
| static int service_set_main_pid(Service *s, pid_t pid) { |
| pid_t ppid; |
| |
| assert(s); |
| |
| if (pid <= 1) |
| return -EINVAL; |
| |
| if (pid == getpid()) |
| return -EINVAL; |
| |
| s->main_pid = pid; |
| s->main_pid_known = true; |
| |
| if (get_parent_of_pid(pid, &ppid) >= 0 && ppid != getpid()) { |
| log_warning("%s: Supervising process %lu which is not our child. We'll most likely not notice when it exits.", |
| s->meta.id, (unsigned long) pid); |
| |
| s->main_pid_alien = true; |
| } else |
| s->main_pid_alien = false; |
| |
| exec_status_start(&s->main_exec_status, pid); |
| |
| return 0; |
| } |
| |
| static void service_close_socket_fd(Service *s) { |
| assert(s); |
| |
| if (s->socket_fd < 0) |
| return; |
| |
| close_nointr_nofail(s->socket_fd); |
| s->socket_fd = -1; |
| } |
| |
| static void service_connection_unref(Service *s) { |
| assert(s); |
| |
| if (!s->accept_socket) |
| return; |
| |
| socket_connection_unref(s->accept_socket); |
| s->accept_socket = NULL; |
| } |
| |
| static void service_done(Unit *u) { |
| Service *s = SERVICE(u); |
| |
| assert(s); |
| |
| free(s->pid_file); |
| s->pid_file = NULL; |
| |
| #ifdef HAVE_SYSV_COMPAT |
| free(s->sysv_path); |
| s->sysv_path = NULL; |
| |
| free(s->sysv_runlevels); |
| s->sysv_runlevels = NULL; |
| #endif |
| |
| free(s->status_text); |
| s->status_text = NULL; |
| |
| exec_context_done(&s->exec_context); |
| exec_command_free_array(s->exec_command, _SERVICE_EXEC_COMMAND_MAX); |
| s->control_command = NULL; |
| s->main_command = NULL; |
| |
| /* This will leak a process, but at least no memory or any of |
| * our resources */ |
| service_unwatch_main_pid(s); |
| service_unwatch_control_pid(s); |
| |
| if (s->bus_name) { |
| unit_unwatch_bus_name(UNIT(u), s->bus_name); |
| free(s->bus_name); |
| s->bus_name = NULL; |
| } |
| |
| service_close_socket_fd(s); |
| service_connection_unref(s); |
| |
| set_free(s->configured_sockets); |
| |
| unit_unwatch_timer(u, &s->timer_watch); |
| } |
| |
| #ifdef HAVE_SYSV_COMPAT |
| static char *sysv_translate_name(const char *name) { |
| char *r; |
| |
| if (!(r = new(char, strlen(name) + sizeof(".service")))) |
| return NULL; |
| |
| #if defined(TARGET_DEBIAN) || defined(TARGET_UBUNTU) || defined(TARGET_ANGSTROM) |
| if (endswith(name, ".sh")) |
| /* Drop Debian-style .sh suffix */ |
| strcpy(stpcpy(r, name) - 3, ".service"); |
| #endif |
| #ifdef TARGET_SUSE |
| if (startswith(name, "boot.")) |
| /* Drop SuSE-style boot. prefix */ |
| strcpy(stpcpy(r, name + 5), ".service"); |
| #endif |
| #ifdef TARGET_FRUGALWARE |
| if (startswith(name, "rc.")) |
| /* Drop Frugalware-style rc. prefix */ |
| strcpy(stpcpy(r, name + 3), ".service"); |
| #endif |
| else |
| /* Normal init scripts */ |
| strcpy(stpcpy(r, name), ".service"); |
| |
| return r; |
| } |
| |
| static int sysv_translate_facility(const char *name, const char *filename, char **_r) { |
| |
| /* We silently ignore the $ prefix here. According to the LSB |
| * spec it simply indicates whether something is a |
| * standardized name or a distribution-specific one. Since we |
| * just follow what already exists and do not introduce new |
| * uses or names we don't care who introduced a new name. */ |
| |
| static const char * const table[] = { |
| /* LSB defined facilities */ |
| "local_fs", SPECIAL_LOCAL_FS_TARGET, |
| #ifndef TARGET_MANDRIVA |
| /* Due to unfortunate name selection in Mandriva, |
| * $network is provided by network-up which is ordered |
| * after network which actually starts interfaces. |
| * To break the loop, just ignore it */ |
| "network", SPECIAL_NETWORK_TARGET, |
| #endif |
| "named", SPECIAL_NSS_LOOKUP_TARGET, |
| "portmap", SPECIAL_RPCBIND_TARGET, |
| "remote_fs", SPECIAL_REMOTE_FS_TARGET, |
| "syslog", SPECIAL_SYSLOG_TARGET, |
| "time", SPECIAL_TIME_SYNC_TARGET, |
| |
| /* common extensions */ |
| "mail-transfer-agent", SPECIAL_MAIL_TRANSFER_AGENT_TARGET, |
| "x-display-manager", SPECIAL_DISPLAY_MANAGER_SERVICE, |
| "null", NULL, |
| |
| #if defined(TARGET_DEBIAN) || defined(TARGET_UBUNTU) || defined(TARGET_ANGSTROM) |
| "mail-transport-agent", SPECIAL_MAIL_TRANSFER_AGENT_TARGET, |
| #endif |
| |
| #ifdef TARGET_FEDORA |
| "MTA", SPECIAL_MAIL_TRANSFER_AGENT_TARGET, |
| "smtpdaemon", SPECIAL_MAIL_TRANSFER_AGENT_TARGET, |
| "httpd", SPECIAL_HTTP_DAEMON_TARGET, |
| #endif |
| |
| #ifdef TARGET_SUSE |
| "smtp", SPECIAL_MAIL_TRANSFER_AGENT_TARGET, |
| #endif |
| }; |
| |
| unsigned i; |
| char *r; |
| const char *n; |
| |
| assert(name); |
| assert(_r); |
| |
| n = *name == '$' ? name + 1 : name; |
| |
| for (i = 0; i < ELEMENTSOF(table); i += 2) { |
| |
| if (!streq(table[i], n)) |
| continue; |
| |
| if (!table[i+1]) |
| return 0; |
| |
| if (!(r = strdup(table[i+1]))) |
| return -ENOMEM; |
| |
| goto finish; |
| } |
| |
| /* If we don't know this name, fallback heuristics to figure |
| * out whether something is a target or a service alias. */ |
| |
| if (*name == '$') { |
| if (!unit_prefix_is_valid(n)) |
| return -EINVAL; |
| |
| /* Facilities starting with $ are most likely targets */ |
| r = unit_name_build(n, NULL, ".target"); |
| } else if (filename && streq(name, filename)) |
| /* Names equaling the file name of the services are redundant */ |
| return 0; |
| else |
| /* Everything else we assume to be normal service names */ |
| r = sysv_translate_name(n); |
| |
| if (!r) |
| return -ENOMEM; |
| |
| finish: |
| *_r = r; |
| |
| return 1; |
| } |
| |
| static int sysv_fix_order(Service *s) { |
| Meta *other; |
| int r; |
| |
| assert(s); |
| |
| if (s->sysv_start_priority < 0) |
| return 0; |
| |
| /* For each pair of services where at least one lacks a LSB |
| * header, we use the start priority value to order things. */ |
| |
| LIST_FOREACH(units_by_type, other, s->meta.manager->units_by_type[UNIT_SERVICE]) { |
| Service *t; |
| UnitDependency d; |
| bool special_s, special_t; |
| |
| t = (Service*) other; |
| |
| if (s == t) |
| continue; |
| |
| if (t->meta.load_state != UNIT_LOADED) |
| continue; |
| |
| if (t->sysv_start_priority < 0) |
| continue; |
| |
| /* If both units have modern headers we don't care |
| * about the priorities */ |
| if ((s->meta.fragment_path || s->sysv_has_lsb) && |
| (t->meta.fragment_path || t->sysv_has_lsb)) |
| continue; |
| |
| special_s = s->sysv_runlevels && !chars_intersect(RUNLEVELS_UP, s->sysv_runlevels); |
| special_t = t->sysv_runlevels && !chars_intersect(RUNLEVELS_UP, t->sysv_runlevels); |
| |
| if (special_t && !special_s) |
| d = UNIT_AFTER; |
| else if (special_s && !special_t) |
| d = UNIT_BEFORE; |
| else if (t->sysv_start_priority < s->sysv_start_priority) |
| d = UNIT_AFTER; |
| else if (t->sysv_start_priority > s->sysv_start_priority) |
| d = UNIT_BEFORE; |
| else |
| continue; |
| |
| /* FIXME: Maybe we should compare the name here lexicographically? */ |
| |
| if ((r = unit_add_dependency(UNIT(s), d, UNIT(t), true)) < 0) |
| return r; |
| } |
| |
| return 0; |
| } |
| |
| static ExecCommand *exec_command_new(const char *path, const char *arg1) { |
| ExecCommand *c; |
| |
| if (!(c = new0(ExecCommand, 1))) |
| return NULL; |
| |
| if (!(c->path = strdup(path))) { |
| free(c); |
| return NULL; |
| } |
| |
| if (!(c->argv = strv_new(path, arg1, NULL))) { |
| free(c->path); |
| free(c); |
| return NULL; |
| } |
| |
| return c; |
| } |
| |
| static int sysv_exec_commands(Service *s) { |
| ExecCommand *c; |
| |
| assert(s); |
| assert(s->sysv_path); |
| |
| if (!(c = exec_command_new(s->sysv_path, "start"))) |
| return -ENOMEM; |
| exec_command_append_list(s->exec_command+SERVICE_EXEC_START, c); |
| |
| if (!(c = exec_command_new(s->sysv_path, "stop"))) |
| return -ENOMEM; |
| exec_command_append_list(s->exec_command+SERVICE_EXEC_STOP, c); |
| |
| if (!(c = exec_command_new(s->sysv_path, "reload"))) |
| return -ENOMEM; |
| exec_command_append_list(s->exec_command+SERVICE_EXEC_RELOAD, c); |
| |
| return 0; |
| } |
| |
| static int service_load_sysv_path(Service *s, const char *path) { |
| FILE *f; |
| Unit *u; |
| unsigned line = 0; |
| int r; |
| enum { |
| NORMAL, |
| DESCRIPTION, |
| LSB, |
| LSB_DESCRIPTION |
| } state = NORMAL; |
| char *short_description = NULL, *long_description = NULL, *chkconfig_description = NULL, *description; |
| struct stat st; |
| |
| assert(s); |
| assert(path); |
| |
| u = UNIT(s); |
| |
| if (!(f = fopen(path, "re"))) { |
| r = errno == ENOENT ? 0 : -errno; |
| goto finish; |
| } |
| |
| zero(st); |
| if (fstat(fileno(f), &st) < 0) { |
| r = -errno; |
| goto finish; |
| } |
| |
| free(s->sysv_path); |
| if (!(s->sysv_path = strdup(path))) { |
| r = -ENOMEM; |
| goto finish; |
| } |
| |
| s->sysv_mtime = timespec_load(&st.st_mtim); |
| |
| if (null_or_empty(&st)) { |
| u->meta.load_state = UNIT_MASKED; |
| r = 0; |
| goto finish; |
| } |
| |
| while (!feof(f)) { |
| char l[LINE_MAX], *t; |
| |
| if (!fgets(l, sizeof(l), f)) { |
| if (feof(f)) |
| break; |
| |
| r = -errno; |
| log_error("Failed to read configuration file '%s': %s", path, strerror(-r)); |
| goto finish; |
| } |
| |
| line++; |
| |
| t = strstrip(l); |
| if (*t != '#') |
| continue; |
| |
| if (state == NORMAL && streq(t, "### BEGIN INIT INFO")) { |
| state = LSB; |
| s->sysv_has_lsb = true; |
| continue; |
| } |
| |
| if ((state == LSB_DESCRIPTION || state == LSB) && streq(t, "### END INIT INFO")) { |
| state = NORMAL; |
| continue; |
| } |
| |
| t++; |
| t += strspn(t, WHITESPACE); |
| |
| if (state == NORMAL) { |
| |
| /* Try to parse Red Hat style chkconfig headers */ |
| |
| if (startswith_no_case(t, "chkconfig:")) { |
| int start_priority; |
| char runlevels[16], *k; |
| |
| state = NORMAL; |
| |
| if (sscanf(t+10, "%15s %i %*i", |
| runlevels, |
| &start_priority) != 2) { |
| |
| log_warning("[%s:%u] Failed to parse chkconfig line. Ignoring.", path, line); |
| continue; |
| } |
| |
| /* A start priority gathered from the |
| * symlink farms is preferred over the |
| * data from the LSB header. */ |
| if (start_priority < 0 || start_priority > 99) |
| log_warning("[%s:%u] Start priority out of range. Ignoring.", path, line); |
| else |
| s->sysv_start_priority = start_priority; |
| |
| char_array_0(runlevels); |
| k = delete_chars(runlevels, WHITESPACE "-"); |
| |
| if (k[0]) { |
| char *d; |
| |
| if (!(d = strdup(k))) { |
| r = -ENOMEM; |
| goto finish; |
| } |
| |
| free(s->sysv_runlevels); |
| s->sysv_runlevels = d; |
| } |
| |
| } else if (startswith_no_case(t, "description:")) { |
| |
| size_t k = strlen(t); |
| char *d; |
| const char *j; |
| |
| if (t[k-1] == '\\') { |
| state = DESCRIPTION; |
| t[k-1] = 0; |
| } |
| |
| if ((j = strstrip(t+12)) && *j) { |
| if (!(d = strdup(j))) { |
| r = -ENOMEM; |
| goto finish; |
| } |
| } else |
| d = NULL; |
| |
| free(chkconfig_description); |
| chkconfig_description = d; |
| |
| } else if (startswith_no_case(t, "pidfile:")) { |
| |
| char *fn; |
| |
| state = NORMAL; |
| |
| fn = strstrip(t+8); |
| if (!path_is_absolute(fn)) { |
| log_warning("[%s:%u] PID file not absolute. Ignoring.", path, line); |
| continue; |
| } |
| |
| if (!(fn = strdup(fn))) { |
| r = -ENOMEM; |
| goto finish; |
| } |
| |
| free(s->pid_file); |
| s->pid_file = fn; |
| } |
| |
| } else if (state == DESCRIPTION) { |
| |
| /* Try to parse Red Hat style description |
| * continuation */ |
| |
| size_t k = strlen(t); |
| char *j; |
| |
| if (t[k-1] == '\\') |
| t[k-1] = 0; |
| else |
| state = NORMAL; |
| |
| if ((j = strstrip(t)) && *j) { |
| char *d = NULL; |
| |
| if (chkconfig_description) |
| d = join(chkconfig_description, " ", j, NULL); |
| else |
| d = strdup(j); |
| |
| if (!d) { |
| r = -ENOMEM; |
| goto finish; |
| } |
| |
| free(chkconfig_description); |
| chkconfig_description = d; |
| } |
| |
| } else if (state == LSB || state == LSB_DESCRIPTION) { |
| |
| if (startswith_no_case(t, "Provides:")) { |
| char *i, *w; |
| size_t z; |
| |
| state = LSB; |
| |
| FOREACH_WORD_QUOTED(w, z, t+9, i) { |
| char *n, *m; |
| |
| if (!(n = strndup(w, z))) { |
| r = -ENOMEM; |
| goto finish; |
| } |
| |
| r = sysv_translate_facility(n, file_name_from_path(path), &m); |
| free(n); |
| |
| if (r < 0) |
| goto finish; |
| |
| if (r == 0) |
| continue; |
| |
| if (unit_name_to_type(m) == UNIT_SERVICE) |
| r = unit_add_name(u, m); |
| else |
| /* NB: SysV targets |
| * which are provided |
| * by a service are |
| * pulled in by the |
| * services, as an |
| * indication that the |
| * generic service is |
| * now available. This |
| * is strictly |
| * one-way. The |
| * targets do NOT pull |
| * in the SysV |
| * services! */ |
| r = unit_add_two_dependencies_by_name(u, UNIT_BEFORE, UNIT_WANTS, m, NULL, true); |
| |
| if (r < 0) |
| log_error("[%s:%u] Failed to add LSB Provides name %s, ignoring: %s", path, line, m, strerror(-r)); |
| |
| free(m); |
| } |
| |
| } else if (startswith_no_case(t, "Required-Start:") || |
| startswith_no_case(t, "Should-Start:") || |
| startswith_no_case(t, "X-Start-Before:") || |
| startswith_no_case(t, "X-Start-After:")) { |
| char *i, *w; |
| size_t z; |
| |
| state = LSB; |
| |
| FOREACH_WORD_QUOTED(w, z, strchr(t, ':')+1, i) { |
| char *n, *m; |
| |
| if (!(n = strndup(w, z))) { |
| r = -ENOMEM; |
| goto finish; |
| } |
| |
| r = sysv_translate_facility(n, file_name_from_path(path), &m); |
| |
| if (r < 0) { |
| log_error("[%s:%u] Failed to translate LSB dependency %s, ignoring: %s", path, line, n, strerror(-r)); |
| free(n); |
| continue; |
| } |
| |
| free(n); |
| |
| if (r == 0) |
| continue; |
| |
| r = unit_add_dependency_by_name(u, startswith_no_case(t, "X-Start-Before:") ? UNIT_BEFORE : UNIT_AFTER, m, NULL, true); |
| |
| if (r < 0) |
| log_error("[%s:%u] Failed to add dependency on %s, ignoring: %s", path, line, m, strerror(-r)); |
| |
| free(m); |
| } |
| } else if (startswith_no_case(t, "Default-Start:")) { |
| char *k, *d; |
| |
| state = LSB; |
| |
| k = delete_chars(t+14, WHITESPACE "-"); |
| |
| if (k[0] != 0) { |
| if (!(d = strdup(k))) { |
| r = -ENOMEM; |
| goto finish; |
| } |
| |
| free(s->sysv_runlevels); |
| s->sysv_runlevels = d; |
| } |
| |
| } else if (startswith_no_case(t, "Description:")) { |
| char *d, *j; |
| |
| state = LSB_DESCRIPTION; |
| |
| if ((j = strstrip(t+12)) && *j) { |
| if (!(d = strdup(j))) { |
| r = -ENOMEM; |
| goto finish; |
| } |
| } else |
| d = NULL; |
| |
| free(long_description); |
| long_description = d; |
| |
| } else if (startswith_no_case(t, "Short-Description:")) { |
| char *d, *j; |
| |
| state = LSB; |
| |
| if ((j = strstrip(t+18)) && *j) { |
| if (!(d = strdup(j))) { |
| r = -ENOMEM; |
| goto finish; |
| } |
| } else |
| d = NULL; |
| |
| free(short_description); |
| short_description = d; |
| |
| } else if (state == LSB_DESCRIPTION) { |
| |
| if (startswith(l, "#\t") || startswith(l, "# ")) { |
| char *j; |
| |
| if ((j = strstrip(t)) && *j) { |
| char *d = NULL; |
| |
| if (long_description) |
| d = join(long_description, " ", t, NULL); |
| else |
| d = strdup(j); |
| |
| if (!d) { |
| r = -ENOMEM; |
| goto finish; |
| } |
| |
| free(long_description); |
| long_description = d; |
| } |
| |
| } else |
| state = LSB; |
| } |
| } |
| } |
| |
| if ((r = sysv_exec_commands(s)) < 0) |
| goto finish; |
| |
| if (s->sysv_runlevels && !chars_intersect(RUNLEVELS_UP, s->sysv_runlevels)) { |
| /* If there a runlevels configured for this service |
| * but none of the standard ones, then we assume this |
| * is some special kind of service (which might be |
| * needed for early boot) and don't create any links |
| * to it. */ |
| |
| s->meta.default_dependencies = false; |
| |
| /* Don't timeout special services during boot (like fsck) */ |
| s->timeout_usec = 0; |
| } else |
| s->timeout_usec = DEFAULT_SYSV_TIMEOUT_USEC; |
| |
| /* Special setting for all SysV services */ |
| s->type = SERVICE_FORKING; |
| s->remain_after_exit = !s->pid_file; |
| s->guess_main_pid = false; |
| s->restart = SERVICE_RESTART_NO; |
| |
| if (s->meta.manager->sysv_console) |
| s->exec_context.std_output = EXEC_OUTPUT_TTY; |
| |
| s->exec_context.kill_mode = KILL_PROCESS; |
| |
| /* We use the long description only if |
| * no short description is set. */ |
| |
| if (short_description) |
| description = short_description; |
| else if (chkconfig_description) |
| description = chkconfig_description; |
| else if (long_description) |
| description = long_description; |
| else |
| description = NULL; |
| |
| if (description) { |
| char *d; |
| |
| if (!(d = strappend(s->sysv_has_lsb ? "LSB: " : "SYSV: ", description))) { |
| r = -ENOMEM; |
| goto finish; |
| } |
| |
| u->meta.description = d; |
| } |
| |
| /* The priority that has been set in /etc/rcN.d/ hierarchies |
| * takes precedence over what is stored as default in the LSB |
| * header */ |
| if (s->sysv_start_priority_from_rcnd >= 0) |
| s->sysv_start_priority = s->sysv_start_priority_from_rcnd; |
| |
| u->meta.load_state = UNIT_LOADED; |
| r = 0; |
| |
| finish: |
| |
| if (f) |
| fclose(f); |
| |
| free(short_description); |
| free(long_description); |
| free(chkconfig_description); |
| |
| return r; |
| } |
| |
| static int service_load_sysv_name(Service *s, const char *name) { |
| char **p; |
| |
| assert(s); |
| assert(name); |
| |
| /* For SysV services we strip the boot.*, rc.* and *.sh |
| * prefixes/suffixes. */ |
| #if defined(TARGET_DEBIAN) || defined(TARGET_UBUNTU) || defined(TARGET_ANGSTROM) |
| if (endswith(name, ".sh.service")) |
| return -ENOENT; |
| #endif |
| |
| #ifdef TARGET_SUSE |
| if (startswith(name, "boot.")) |
| return -ENOENT; |
| #endif |
| |
| #ifdef TARGET_FRUGALWARE |
| if (startswith(name, "rc.")) |
| return -ENOENT; |
| #endif |
| |
| STRV_FOREACH(p, s->meta.manager->lookup_paths.sysvinit_path) { |
| char *path; |
| int r; |
| |
| path = join(*p, "/", name, NULL); |
| if (!path) |
| return -ENOMEM; |
| |
| assert(endswith(path, ".service")); |
| path[strlen(path)-8] = 0; |
| |
| r = service_load_sysv_path(s, path); |
| |
| #if defined(TARGET_DEBIAN) || defined(TARGET_UBUNTU) || defined(TARGET_ANGSTROM) |
| if (r >= 0 && s->meta.load_state == UNIT_STUB) { |
| /* Try Debian style *.sh source'able init scripts */ |
| strcat(path, ".sh"); |
| r = service_load_sysv_path(s, path); |
| } |
| #endif |
| free(path); |
| |
| #ifdef TARGET_SUSE |
| if (r >= 0 && s->meta.load_state == UNIT_STUB) { |
| /* Try SUSE style boot.* init scripts */ |
| |
| path = join(*p, "/boot.", name, NULL); |
| if (!path) |
| return -ENOMEM; |
| |
| /* Drop .service suffix */ |
| path[strlen(path)-8] = 0; |
| r = service_load_sysv_path(s, path); |
| free(path); |
| } |
| #endif |
| |
| #ifdef TARGET_FRUGALWARE |
| if (r >= 0 && s->meta.load_state == UNIT_STUB) { |
| /* Try Frugalware style rc.* init scripts */ |
| |
| path = join(*p, "/rc.", name, NULL); |
| if (!path) |
| return -ENOMEM; |
| |
| /* Drop .service suffix */ |
| path[strlen(path)-8] = 0; |
| r = service_load_sysv_path(s, path); |
| free(path); |
| } |
| #endif |
| |
| if (r < 0) |
| return r; |
| |
| if ((s->meta.load_state != UNIT_STUB)) |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int service_load_sysv(Service *s) { |
| const char *t; |
| Iterator i; |
| int r; |
| |
| assert(s); |
| |
| /* Load service data from SysV init scripts, preferably with |
| * LSB headers ... */ |
| |
| if (strv_isempty(s->meta.manager->lookup_paths.sysvinit_path)) |
| return 0; |
| |
| if ((t = s->meta.id)) |
| if ((r = service_load_sysv_name(s, t)) < 0) |
| return r; |
| |
| if (s->meta.load_state == UNIT_STUB) |
| SET_FOREACH(t, s->meta.names, i) { |
| if (t == s->meta.id) |
| continue; |
| |
| if ((r = service_load_sysv_name(s, t)) < 0) |
| return r; |
| |
| if (s->meta.load_state != UNIT_STUB) |
| break; |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| static int fsck_fix_order(Service *s) { |
| Meta *other; |
| int r; |
| |
| assert(s); |
| |
| if (s->fsck_passno <= 0) |
| return 0; |
| |
| /* For each pair of services where both have an fsck priority |
| * we order things based on it. */ |
| |
| LIST_FOREACH(units_by_type, other, s->meta.manager->units_by_type[UNIT_SERVICE]) { |
| Service *t; |
| UnitDependency d; |
| |
| t = (Service*) other; |
| |
| if (s == t) |
| continue; |
| |
| if (t->meta.load_state != UNIT_LOADED) |
| continue; |
| |
| if (t->fsck_passno <= 0) |
| continue; |
| |
| if (t->fsck_passno < s->fsck_passno) |
| d = UNIT_AFTER; |
| else if (t->fsck_passno > s->fsck_passno) |
| d = UNIT_BEFORE; |
| else |
| continue; |
| |
| if ((r = unit_add_dependency(UNIT(s), d, UNIT(t), true)) < 0) |
| return r; |
| } |
| |
| return 0; |
| } |
| |
| static int service_verify(Service *s) { |
| assert(s); |
| |
| if (s->meta.load_state != UNIT_LOADED) |
| return 0; |
| |
| if (!s->exec_command[SERVICE_EXEC_START]) { |
| log_error("%s lacks ExecStart setting. Refusing.", s->meta.id); |
| return -EINVAL; |
| } |
| |
| if (s->type != SERVICE_ONESHOT && |
| s->exec_command[SERVICE_EXEC_START]->command_next) { |
| log_error("%s has more than one ExecStart setting, which is only allowed for Type=oneshot services. Refusing.", s->meta.id); |
| return -EINVAL; |
| } |
| |
| if (s->type == SERVICE_ONESHOT && |
| s->exec_command[SERVICE_EXEC_RELOAD]) { |
| log_error("%s has an ExecReload setting, which is not allowed for Type=oneshot services. Refusing.", s->meta.id); |
| return -EINVAL; |
| } |
| |
| if (s->type == SERVICE_DBUS && !s->bus_name) { |
| log_error("%s is of type D-Bus but no D-Bus service name has been specified. Refusing.", s->meta.id); |
| return -EINVAL; |
| } |
| |
| if (s->exec_context.pam_name && s->exec_context.kill_mode != KILL_CONTROL_GROUP) { |
| log_error("%s has PAM enabled. Kill mode must be set to 'control-group'. Refusing.", s->meta.id); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int service_add_default_dependencies(Service *s) { |
| int r; |
| |
| assert(s); |
| |
| /* Add a number of automatic dependencies useful for the |
| * majority of services. */ |
| |
| /* First, pull in base system */ |
| if (s->meta.manager->running_as == MANAGER_SYSTEM) { |
| |
| if ((r = unit_add_two_dependencies_by_name(UNIT(s), UNIT_AFTER, UNIT_REQUIRES, SPECIAL_BASIC_TARGET, NULL, true)) < 0) |
| return r; |
| |
| } else if (s->meta.manager->running_as == MANAGER_USER) { |
| |
| if ((r = unit_add_two_dependencies_by_name(UNIT(s), UNIT_AFTER, UNIT_REQUIRES, SPECIAL_SOCKETS_TARGET, NULL, true)) < 0) |
| return r; |
| } |
| |
| /* Second, activate normal shutdown */ |
| return unit_add_two_dependencies_by_name(UNIT(s), UNIT_BEFORE, UNIT_CONFLICTS, SPECIAL_SHUTDOWN_TARGET, NULL, true); |
| } |
| |
| static void service_fix_output(Service *s) { |
| assert(s); |
| |
| /* If nothing has been explicitly configured, patch default |
| * output in. If input is socket/tty we avoid this however, |
| * since in that case we want output to default to the same |
| * place as we read input from. */ |
| |
| if (s->exec_context.std_error == EXEC_OUTPUT_INHERIT && |
| s->exec_context.std_output == EXEC_OUTPUT_INHERIT && |
| s->exec_context.std_input == EXEC_INPUT_NULL) |
| s->exec_context.std_error = s->meta.manager->default_std_error; |
| |
| if (s->exec_context.std_output == EXEC_OUTPUT_INHERIT && |
| s->exec_context.std_input == EXEC_INPUT_NULL) |
| s->exec_context.std_output = s->meta.manager->default_std_output; |
| } |
| |
| static int service_load(Unit *u) { |
| int r; |
| Service *s = SERVICE(u); |
| |
| assert(s); |
| |
| /* Load a .service file */ |
| if ((r = unit_load_fragment(u)) < 0) |
| return r; |
| |
| #ifdef HAVE_SYSV_COMPAT |
| /* Load a classic init script as a fallback, if we couldn't find anything */ |
| if (u->meta.load_state == UNIT_STUB) |
| if ((r = service_load_sysv(s)) < 0) |
| return r; |
| #endif |
| |
| /* Still nothing found? Then let's give up */ |
| if (u->meta.load_state == UNIT_STUB) |
| return -ENOENT; |
| |
| /* We were able to load something, then let's add in the |
| * dropin directories. */ |
| if ((r = unit_load_dropin(unit_follow_merge(u))) < 0) |
| return r; |
| |
| /* This is a new unit? Then let's add in some extras */ |
| if (u->meta.load_state == UNIT_LOADED) { |
| service_fix_output(s); |
| |
| if ((r = unit_add_exec_dependencies(u, &s->exec_context)) < 0) |
| return r; |
| |
| if ((r = unit_add_default_cgroups(u)) < 0) |
| return r; |
| |
| #ifdef HAVE_SYSV_COMPAT |
| if ((r = sysv_fix_order(s)) < 0) |
| return r; |
| #endif |
| |
| if ((r = fsck_fix_order(s)) < 0) |
| return r; |
| |
| if (s->bus_name) |
| if ((r = unit_watch_bus_name(u, s->bus_name)) < 0) |
| return r; |
| |
| if (s->type == SERVICE_NOTIFY && s->notify_access == NOTIFY_NONE) |
| s->notify_access = NOTIFY_MAIN; |
| |
| if (s->type == SERVICE_DBUS || s->bus_name) |
| if ((r = unit_add_two_dependencies_by_name(u, UNIT_AFTER, UNIT_REQUIRES, SPECIAL_DBUS_SOCKET, NULL, true)) < 0) |
| return r; |
| |
| if (s->meta.default_dependencies) |
| if ((r = service_add_default_dependencies(s)) < 0) |
| return r; |
| } |
| |
| return service_verify(s); |
| } |
| |
| static void service_dump(Unit *u, FILE *f, const char *prefix) { |
| |
| ServiceExecCommand c; |
| Service *s = SERVICE(u); |
| const char *prefix2; |
| char *p2; |
| |
| assert(s); |
| |
| p2 = strappend(prefix, "\t"); |
| prefix2 = p2 ? p2 : prefix; |
| |
| fprintf(f, |
| "%sService State: %s\n" |
| "%sPermissionsStartOnly: %s\n" |
| "%sRootDirectoryStartOnly: %s\n" |
| "%sRemainAfterExit: %s\n" |
| "%sGuessMainPID: %s\n" |
| "%sType: %s\n" |
| "%sRestart: %s\n" |
| "%sNotifyAccess: %s\n", |
| prefix, service_state_to_string(s->state), |
| prefix, yes_no(s->permissions_start_only), |
| prefix, yes_no(s->root_directory_start_only), |
| prefix, yes_no(s->remain_after_exit), |
| prefix, yes_no(s->guess_main_pid), |
| prefix, service_type_to_string(s->type), |
| prefix, service_restart_to_string(s->restart), |
| prefix, notify_access_to_string(s->notify_access)); |
| |
| if (s->control_pid > 0) |
| fprintf(f, |
| "%sControl PID: %lu\n", |
| prefix, (unsigned long) s->control_pid); |
| |
| if (s->main_pid > 0) |
| fprintf(f, |
| "%sMain PID: %lu\n" |
| "%sMain PID Known: %s\n" |
| "%sMain PID Alien: %s\n", |
| prefix, (unsigned long) s->main_pid, |
| prefix, yes_no(s->main_pid_known), |
| prefix, yes_no(s->main_pid_alien)); |
| |
| if (s->pid_file) |
| fprintf(f, |
| "%sPIDFile: %s\n", |
| prefix, s->pid_file); |
| |
| if (s->bus_name) |
| fprintf(f, |
| "%sBusName: %s\n" |
| "%sBus Name Good: %s\n", |
| prefix, s->bus_name, |
| prefix, yes_no(s->bus_name_good)); |
| |
| exec_context_dump(&s->exec_context, f, prefix); |
| |
| for (c = 0; c < _SERVICE_EXEC_COMMAND_MAX; c++) { |
| |
| if (!s->exec_command[c]) |
| continue; |
| |
| fprintf(f, "%s-> %s:\n", |
| prefix, service_exec_command_to_string(c)); |
| |
| exec_command_dump_list(s->exec_command[c], f, prefix2); |
| } |
| |
| #ifdef HAVE_SYSV_COMPAT |
| if (s->sysv_path) |
| fprintf(f, |
| "%sSysV Init Script Path: %s\n" |
| "%sSysV Init Script has LSB Header: %s\n" |
| "%sSysVEnabled: %s\n", |
| prefix, s->sysv_path, |
| prefix, yes_no(s->sysv_has_lsb), |
| prefix, yes_no(s->sysv_enabled)); |
| |
| if (s->sysv_start_priority >= 0) |
| fprintf(f, |
| "%sSysVStartPriority: %i\n", |
| prefix, s->sysv_start_priority); |
| |
| if (s->sysv_runlevels) |
| fprintf(f, "%sSysVRunLevels: %s\n", |
| prefix, s->sysv_runlevels); |
| #endif |
| |
| if (s->fsck_passno > 0) |
| fprintf(f, |
| "%sFsckPassNo: %i\n", |
| prefix, s->fsck_passno); |
| |
| if (s->status_text) |
| fprintf(f, "%sStatus Text: %s\n", |
| prefix, s->status_text); |
| |
| free(p2); |
| } |
| |
| static int service_load_pid_file(Service *s, bool warn_if_missing) { |
| char *k; |
| int r; |
| pid_t pid; |
| |
| assert(s); |
| |
| if (!s->pid_file) |
| return -ENOENT; |
| |
| if ((r = read_one_line_file(s->pid_file, &k)) < 0) { |
| if (warn_if_missing) |
| log_warning("Failed to read PID file %s after %s. The service might be broken.", |
| s->pid_file, service_state_to_string(s->state)); |
| return r; |
| } |
| |
| r = parse_pid(k, &pid); |
| free(k); |
| |
| if (r < 0) |
| return r; |
| |
| if (kill(pid, 0) < 0 && errno != EPERM) { |
| log_warning("PID %lu read from file %s does not exist. Your service or init script might be broken.", |
| (unsigned long) pid, s->pid_file); |
| return -ESRCH; |
| } |
| |
| if (s->main_pid_known) { |
| if (pid == s->main_pid) |
| return 0; |
| |
| log_debug("Main PID changing: %lu -> %lu", |
| (unsigned long) s->main_pid, (unsigned long) pid); |
| service_unwatch_main_pid(s); |
| s->main_pid_known = false; |
| } |
| |
| if ((r = service_set_main_pid(s, pid)) < 0) |
| return r; |
| |
| if ((r = unit_watch_pid(UNIT(s), pid)) < 0) |
| /* FIXME: we need to do something here */ |
| return r; |
| |
| return 0; |
| } |
| |
| static int service_search_main_pid(Service *s) { |
| pid_t pid; |
| int r; |
| |
| assert(s); |
| |
| /* If we know it anyway, don't ever fallback to unreliable |
| * heuristics */ |
| if (s->main_pid_known) |
| return 0; |
| |
| if (!s->guess_main_pid) |
| return 0; |
| |
| assert(s->main_pid <= 0); |
| |
| if ((pid = cgroup_bonding_search_main_pid_list(s->meta.cgroup_bondings)) <= 0) |
| return -ENOENT; |
| |
| if ((r = service_set_main_pid(s, pid)) < 0) |
| return r; |
| |
| if ((r = unit_watch_pid(UNIT(s), pid)) < 0) |
| /* FIXME: we need to do something here */ |
| return r; |
| |
| return 0; |
| } |
| |
| static int service_get_sockets(Service *s, Set **_set) { |
| Set *set; |
| Iterator i; |
| char *t; |
| int r; |
| |
| assert(s); |
| assert(_set); |
| |
| if (s->socket_fd >= 0) |
| return 0; |
| |
| if (!set_isempty(s->configured_sockets)) |
| return 0; |
| |
| /* Collects all Socket objects that belong to this |
| * service. Note that a service might have multiple sockets |
| * via multiple names. */ |
| |
| if (!(set = set_new(NULL, NULL))) |
| return -ENOMEM; |
| |
| SET_FOREACH(t, s->meta.names, i) { |
| char *k; |
| Unit *p; |
| |
| /* Look for all socket objects that go by any of our |
| * units and collect their fds */ |
| |
| if (!(k = unit_name_change_suffix(t, ".socket"))) { |
| r = -ENOMEM; |
| goto fail; |
| } |
| |
| p = manager_get_unit(s->meta.manager, k); |
| free(k); |
| |
| if (!p) |
| continue; |
| |
| if ((r = set_put(set, p)) < 0) |
| goto fail; |
| } |
| |
| *_set = set; |
| return 0; |
| |
| fail: |
| set_free(set); |
| return r; |
| } |
| |
| static int service_notify_sockets_dead(Service *s) { |
| Iterator i; |
| Set *set, *free_set = NULL; |
| Socket *sock; |
| int r; |
| |
| assert(s); |
| |
| /* Notifies all our sockets when we die */ |
| |
| if (s->socket_fd >= 0) |
| return 0; |
| |
| if (!set_isempty(s->configured_sockets)) |
| set = s->configured_sockets; |
| else { |
| if ((r = service_get_sockets(s, &free_set)) < 0) |
| return r; |
| |
| set = free_set; |
| } |
| |
| SET_FOREACH(sock, set, i) |
| socket_notify_service_dead(sock); |
| |
| set_free(free_set); |
| |
| return 0; |
| } |
| |
| static void service_set_state(Service *s, ServiceState state) { |
| ServiceState old_state; |
| assert(s); |
| |
| old_state = s->state; |
| s->state = state; |
| |
| if (state != SERVICE_START_PRE && |
| state != SERVICE_START && |
| state != SERVICE_START_POST && |
| state != SERVICE_RELOAD && |
| state != SERVICE_STOP && |
| state != SERVICE_STOP_SIGTERM && |
| state != SERVICE_STOP_SIGKILL && |
| state != SERVICE_STOP_POST && |
| state != SERVICE_FINAL_SIGTERM && |
| state != SERVICE_FINAL_SIGKILL && |
| state != SERVICE_AUTO_RESTART) |
| unit_unwatch_timer(UNIT(s), &s->timer_watch); |
| |
| if (state != SERVICE_START && |
| state != SERVICE_START_POST && |
| state != SERVICE_RUNNING && |
| state != SERVICE_RELOAD && |
| state != SERVICE_STOP && |
| state != SERVICE_STOP_SIGTERM && |
| state != SERVICE_STOP_SIGKILL) { |
| service_unwatch_main_pid(s); |
| s->main_command = NULL; |
| } |
| |
| if (state != SERVICE_START_PRE && |
| state != SERVICE_START && |
| state != SERVICE_START_POST && |
| state != SERVICE_RELOAD && |
| state != SERVICE_STOP && |
| state != SERVICE_STOP_SIGTERM && |
| state != SERVICE_STOP_SIGKILL && |
| state != SERVICE_STOP_POST && |
| state != SERVICE_FINAL_SIGTERM && |
| state != SERVICE_FINAL_SIGKILL) { |
| service_unwatch_control_pid(s); |
| s->control_command = NULL; |
| s->control_command_id = _SERVICE_EXEC_COMMAND_INVALID; |
| } |
| |
| if (state == SERVICE_DEAD || |
| state == SERVICE_STOP || |
| state == SERVICE_STOP_SIGTERM || |
| state == SERVICE_STOP_SIGKILL || |
| state == SERVICE_STOP_POST || |
| state == SERVICE_FINAL_SIGTERM || |
| state == SERVICE_FINAL_SIGKILL || |
| state == SERVICE_FAILED || |
| state == SERVICE_AUTO_RESTART) |
| service_notify_sockets_dead(s); |
| |
| if (state != SERVICE_START_PRE && |
| state != SERVICE_START && |
| state != SERVICE_START_POST && |
| state != SERVICE_RUNNING && |
| state != SERVICE_RELOAD && |
| state != SERVICE_STOP && |
| state != SERVICE_STOP_SIGTERM && |
| state != SERVICE_STOP_SIGKILL && |
| state != SERVICE_STOP_POST && |
| state != SERVICE_FINAL_SIGTERM && |
| state != SERVICE_FINAL_SIGKILL && |
| !(state == SERVICE_DEAD && s->meta.job)) { |
| service_close_socket_fd(s); |
| service_connection_unref(s); |
| } |
| |
| /* For the inactive states unit_notify() will trim the cgroup, |
| * but for exit we have to do that ourselves... */ |
| if (state == SERVICE_EXITED && s->meta.manager->n_reloading <= 0) |
| cgroup_bonding_trim_list(s->meta.cgroup_bondings, true); |
| |
| if (old_state != state) |
| log_debug("%s changed %s -> %s", s->meta.id, service_state_to_string(old_state), service_state_to_string(state)); |
| |
| unit_notify(UNIT(s), state_translation_table[old_state], state_translation_table[state], !s->reload_failure); |
| s->reload_failure = false; |
| } |
| |
| static int service_coldplug(Unit *u) { |
| Service *s = SERVICE(u); |
| int r; |
| |
| assert(s); |
| assert(s->state == SERVICE_DEAD); |
| |
| if (s->deserialized_state != s->state) { |
| |
| if (s->deserialized_state == SERVICE_START_PRE || |
| s->deserialized_state == SERVICE_START || |
| s->deserialized_state == SERVICE_START_POST || |
| s->deserialized_state == SERVICE_RELOAD || |
| s->deserialized_state == SERVICE_STOP || |
| s->deserialized_state == SERVICE_STOP_SIGTERM || |
| s->deserialized_state == SERVICE_STOP_SIGKILL || |
| s->deserialized_state == SERVICE_STOP_POST || |
| s->deserialized_state == SERVICE_FINAL_SIGTERM || |
| s->deserialized_state == SERVICE_FINAL_SIGKILL || |
| s->deserialized_state == SERVICE_AUTO_RESTART) { |
| |
| if (s->deserialized_state == SERVICE_AUTO_RESTART || s->timeout_usec > 0) { |
| usec_t k; |
| |
| k = s->deserialized_state == SERVICE_AUTO_RESTART ? s->restart_usec : s->timeout_usec; |
| |
| if ((r = unit_watch_timer(UNIT(s), k, &s->timer_watch)) < 0) |
| return r; |
| } |
| } |
| |
| if ((s->deserialized_state == SERVICE_START && |
| (s->type == SERVICE_FORKING || |
| s->type == SERVICE_DBUS || |
| s->type == SERVICE_ONESHOT || |
| s->type == SERVICE_NOTIFY)) || |
| s->deserialized_state == SERVICE_START_POST || |
| s->deserialized_state == SERVICE_RUNNING || |
| s->deserialized_state == SERVICE_RELOAD || |
| s->deserialized_state == SERVICE_STOP || |
| s->deserialized_state == SERVICE_STOP_SIGTERM || |
| s->deserialized_state == SERVICE_STOP_SIGKILL) |
| if (s->main_pid > 0) |
| if ((r = unit_watch_pid(UNIT(s), s->main_pid)) < 0) |
| return r; |
| |
| if (s->deserialized_state == SERVICE_START_PRE || |
| s->deserialized_state == SERVICE_START || |
| s->deserialized_state == SERVICE_START_POST || |
| s->deserialized_state == SERVICE_RELOAD || |
| s->deserialized_state == SERVICE_STOP || |
| s->deserialized_state == SERVICE_STOP_SIGTERM || |
| s->deserialized_state == SERVICE_STOP_SIGKILL || |
| s->deserialized_state == SERVICE_STOP_POST || |
| s->deserialized_state == SERVICE_FINAL_SIGTERM || |
| s->deserialized_state == SERVICE_FINAL_SIGKILL) |
| if (s->control_pid > 0) |
| if ((r = unit_watch_pid(UNIT(s), s->control_pid)) < 0) |
| return r; |
| |
| service_set_state(s, s->deserialized_state); |
| } |
| |
| return 0; |
| } |
| |
| static int service_collect_fds(Service *s, int **fds, unsigned *n_fds) { |
| Iterator i; |
| int r; |
| int *rfds = NULL; |
| unsigned rn_fds = 0; |
| Set *set, *free_set = NULL; |
| Socket *sock; |
| |
| assert(s); |
| assert(fds); |
| assert(n_fds); |
| |
| if (s->socket_fd >= 0) |
| return 0; |
| |
| if (!set_isempty(s->configured_sockets)) |
| set = s->configured_sockets; |
| else { |
| if ((r = service_get_sockets(s, &free_set)) < 0) |
| return r; |
| |
| set = free_set; |
| } |
| |
| SET_FOREACH(sock, set, i) { |
| int *cfds; |
| unsigned cn_fds; |
| |
| if ((r = socket_collect_fds(sock, &cfds, &cn_fds)) < 0) |
| goto fail; |
| |
| if (!cfds) |
| continue; |
| |
| if (!rfds) { |
| rfds = cfds; |
| rn_fds = cn_fds; |
| } else { |
| int *t; |
| |
| if (!(t = new(int, rn_fds+cn_fds))) { |
| free(cfds); |
| r = -ENOMEM; |
| goto fail; |
| } |
| |
| memcpy(t, rfds, rn_fds * sizeof(int)); |
| memcpy(t+rn_fds, cfds, cn_fds * sizeof(int)); |
| free(rfds); |
| free(cfds); |
| |
| rfds = t; |
| rn_fds = rn_fds+cn_fds; |
| } |
| } |
| |
| *fds = rfds; |
| *n_fds = rn_fds; |
| |
| set_free(free_set); |
| |
| return 0; |
| |
| fail: |
| set_free(set); |
| free(rfds); |
| |
| return r; |
| } |
| |
| static int service_spawn( |
| Service *s, |
| ExecCommand *c, |
| bool timeout, |
| bool pass_fds, |
| bool apply_permissions, |
| bool apply_chroot, |
| bool apply_tty_stdin, |
| bool set_notify_socket, |
| pid_t *_pid) { |
| |
| pid_t pid; |
| int r; |
| int *fds = NULL, *fdsbuf = NULL; |
| unsigned n_fds = 0, n_env = 0; |
| char **argv = NULL, **final_env = NULL, **our_env = NULL; |
| |
| assert(s); |
| assert(c); |
| assert(_pid); |
| |
| if (pass_fds || |
| s->exec_context.std_input == EXEC_INPUT_SOCKET || |
| s->exec_context.std_output == EXEC_OUTPUT_SOCKET || |
| s->exec_context.std_error == EXEC_OUTPUT_SOCKET) { |
| |
| if (s->socket_fd >= 0) { |
| fds = &s->socket_fd; |
| n_fds = 1; |
| } else { |
| if ((r = service_collect_fds(s, &fdsbuf, &n_fds)) < 0) |
| goto fail; |
| |
| fds = fdsbuf; |
| } |
| } |
| |
| if (timeout && s->timeout_usec) { |
| if ((r = unit_watch_timer(UNIT(s), s->timeout_usec, &s->timer_watch)) < 0) |
| goto fail; |
| } else |
| unit_unwatch_timer(UNIT(s), &s->timer_watch); |
| |
| if (!(argv = unit_full_printf_strv(UNIT(s), c->argv))) { |
| r = -ENOMEM; |
| goto fail; |
| } |
| |
| if (!(our_env = new0(char*, 4))) { |
| r = -ENOMEM; |
| goto fail; |
| } |
| |
| if (set_notify_socket) |
| if (asprintf(our_env + n_env++, "NOTIFY_SOCKET=%s", s->meta.manager->notify_socket) < 0) { |
| r = -ENOMEM; |
| goto fail; |
| } |
| |
| if (s->main_pid > 0) |
| if (asprintf(our_env + n_env++, "MAINPID=%lu", (unsigned long) s->main_pid) < 0) { |
| r = -ENOMEM; |
| goto fail; |
| } |
| |
| if (!(final_env = strv_env_merge(2, |
| s->meta.manager->environment, |
| our_env, |
| NULL))) { |
| r = -ENOMEM; |
| goto fail; |
| } |
| |
| r = exec_spawn(c, |
| argv, |
| &s->exec_context, |
| fds, n_fds, |
| final_env, |
| apply_permissions, |
| apply_chroot, |
| apply_tty_stdin, |
| s->meta.manager->confirm_spawn, |
| s->meta.cgroup_bondings, |
| s->meta.cgroup_attributes, |
| &pid); |
| |
| if (r < 0) |
| goto fail; |
| |
| |
| if ((r = unit_watch_pid(UNIT(s), pid)) < 0) |
| /* FIXME: we need to do something here */ |
| goto fail; |
| |
| free(fdsbuf); |
| strv_free(argv); |
| strv_free(our_env); |
| strv_free(final_env); |
| |
| *_pid = pid; |
| |
| return 0; |
| |
| fail: |
| free(fdsbuf); |
| strv_free(argv); |
| strv_free(our_env); |
| strv_free(final_env); |
| |
| if (timeout) |
| unit_unwatch_timer(UNIT(s), &s->timer_watch); |
| |
| return r; |
| } |
| |
| static int main_pid_good(Service *s) { |
| assert(s); |
| |
| /* Returns 0 if the pid is dead, 1 if it is good, -1 if we |
| * don't know */ |
| |
| /* If we know the pid file, then lets just check if it is |
| * still valid */ |
| if (s->main_pid_known) { |
| |
| /* If it's an alien child let's check if it is still |
| * alive ... */ |
| if (s->main_pid_alien) |
| return kill(s->main_pid, 0) >= 0 || errno != ESRCH; |
| |
| /* .. otherwise assume we'll get a SIGCHLD for it, |
| * which we really should wait for to collect exit |
| * status and code */ |
| return s->main_pid > 0; |
| } |
| |
| /* We don't know the pid */ |
| return -EAGAIN; |
| } |
| |
| static int control_pid_good(Service *s) { |
| assert(s); |
| |
| return s->control_pid > 0; |
| } |
| |
| static int cgroup_good(Service *s) { |
| int r; |
| |
| assert(s); |
| |
| if ((r = cgroup_bonding_is_empty_list(s->meta.cgroup_bondings)) < 0) |
| return r; |
| |
| return !r; |
| } |
| |
| static void service_enter_dead(Service *s, bool success, bool allow_restart) { |
| int r; |
| assert(s); |
| |
| if (!success) |
| s->failure = true; |
| |
| if (allow_restart && |
| !s->forbid_restart && |
| (s->restart == SERVICE_RESTART_ALWAYS || |
| (s->restart == SERVICE_RESTART_ON_SUCCESS && !s->failure) || |
| (s->restart == SERVICE_RESTART_ON_FAILURE && s->failure) || |
| (s->restart == SERVICE_RESTART_ON_ABORT && s->failure && |
| (s->main_exec_status.code == CLD_KILLED || |
| s->main_exec_status.code == CLD_DUMPED)))) { |
| |
| if ((r = unit_watch_timer(UNIT(s), s->restart_usec, &s->timer_watch)) < 0) |
| goto fail; |
| |
| service_set_state(s, SERVICE_AUTO_RESTART); |
| } else |
| service_set_state(s, s->failure ? SERVICE_FAILED : SERVICE_DEAD); |
| |
| s->forbid_restart = false; |
| |
| return; |
| |
| fail: |
| log_warning("%s failed to run install restart timer: %s", s->meta.id, strerror(-r)); |
| service_enter_dead(s, false, false); |
| } |
| |
| static void service_enter_signal(Service *s, ServiceState state, bool success); |
| |
| static void service_enter_stop_post(Service *s, bool success) { |
| int r; |
| assert(s); |
| |
| if (!success) |
| s->failure = true; |
| |
| service_unwatch_control_pid(s); |
| |
| if ((s->control_command = s->exec_command[SERVICE_EXEC_STOP_POST])) { |
| s->control_command_id = SERVICE_EXEC_STOP_POST; |
| |
| if ((r = service_spawn(s, |
| s->control_command, |
| true, |
| false, |
| !s->permissions_start_only, |
| !s->root_directory_start_only, |
| true, |
| false, |
| &s->control_pid)) < 0) |
| goto fail; |
| |
| |
| service_set_state(s, SERVICE_STOP_POST); |
| } else |
| service_enter_signal(s, SERVICE_FINAL_SIGTERM, true); |
| |
| return; |
| |
| fail: |
| log_warning("%s failed to run 'stop-post' task: %s", s->meta.id, strerror(-r)); |
| service_enter_signal(s, SERVICE_FINAL_SIGTERM, false); |
| } |
| |
| static void service_enter_signal(Service *s, ServiceState state, bool success) { |
| int r; |
| Set *pid_set = NULL; |
| bool wait_for_exit = false; |
| |
| assert(s); |
| |
| if (!success) |
| s->failure = true; |
| |
| if (s->exec_context.kill_mode != KILL_NONE) { |
| int sig = (state == SERVICE_STOP_SIGTERM || state == SERVICE_FINAL_SIGTERM) ? s->exec_context.kill_signal : SIGKILL; |
| |
| if (s->main_pid > 0) { |
| if (kill_and_sigcont(s->main_pid, sig) < 0 && errno != ESRCH) |
| log_warning("Failed to kill main process %li: %m", (long) s->main_pid); |
| else |
| wait_for_exit = !s->main_pid_alien; |
| } |
| |
| if (s->control_pid > 0) { |
| if (kill_and_sigcont(s->control_pid, sig) < 0 && errno != ESRCH) |
| log_warning("Failed to kill control process %li: %m", (long) s->control_pid); |
| else |
| wait_for_exit = true; |
| } |
| |
| if (s->exec_context.kill_mode == KILL_CONTROL_GROUP) { |
| |
| if (!(pid_set = set_new(trivial_hash_func, trivial_compare_func))) { |
| r = -ENOMEM; |
| goto fail; |
| } |
| |
| /* Exclude the main/control pids from being killed via the cgroup */ |
| if (s->main_pid > 0) |
| if ((r = set_put(pid_set, LONG_TO_PTR(s->main_pid))) < 0) |
| goto fail; |
| |
| if (s->control_pid > 0) |
| if ((r = set_put(pid_set, LONG_TO_PTR(s->control_pid))) < 0) |
| goto fail; |
| |
| if ((r = cgroup_bonding_kill_list(s->meta.cgroup_bondings, sig, true, pid_set)) < 0) { |
| if (r != -EAGAIN && r != -ESRCH && r != -ENOENT) |
| log_warning("Failed to kill control group: %s", strerror(-r)); |
| } else if (r > 0) |
| wait_for_exit = true; |
| |
| set_free(pid_set); |
| pid_set = NULL; |
| } |
| } |
| |
| if (wait_for_exit) { |
| if (s->timeout_usec > 0) |
| if ((r = unit_watch_timer(UNIT(s), s->timeout_usec, &s->timer_watch)) < 0) |
| goto fail; |
| |
| service_set_state(s, state); |
| } else if (state == SERVICE_STOP_SIGTERM || state == SERVICE_STOP_SIGKILL) |
| service_enter_stop_post(s, true); |
| else |
| service_enter_dead(s, true, true); |
| |
| return; |
| |
| fail: |
| log_warning("%s failed to kill processes: %s", s->meta.id, strerror(-r)); |
| |
| if (state == SERVICE_STOP_SIGTERM || state == SERVICE_STOP_SIGKILL) |
| service_enter_stop_post(s, false); |
| else |
| service_enter_dead(s, false, true); |
| |
| if (pid_set) |
| set_free(pid_set); |
| } |
| |
| static void service_enter_stop(Service *s, bool success) { |
| int r; |
| |
| assert(s); |
| |
| if (!success) |
| s->failure = true; |
| |
| service_unwatch_control_pid(s); |
| |
| if ((s->control_command = s->exec_command[SERVICE_EXEC_STOP])) { |
| s->control_command_id = SERVICE_EXEC_STOP; |
| |
| if ((r = service_spawn(s, |
| s->control_command, |
| true, |
| false, |
| !s->permissions_start_only, |
| !s->root_directory_start_only, |
| false, |
| false, |
| &s->control_pid)) < 0) |
| goto fail; |
| |
| service_set_state(s, SERVICE_STOP); |
| } else |
| service_enter_signal(s, SERVICE_STOP_SIGTERM, true); |
| |
| return; |
| |
| fail: |
| log_warning("%s failed to run 'stop' task: %s", s->meta.id, strerror(-r)); |
| service_enter_signal(s, SERVICE_STOP_SIGTERM, false); |
| } |
| |
| static void service_enter_running(Service *s, bool success) { |
| int main_pid_ok, cgroup_ok; |
| assert(s); |
| |
| if (!success) |
| s->failure = true; |
| |
| main_pid_ok = main_pid_good(s); |
| cgroup_ok = cgroup_good(s); |
| |
| if ((main_pid_ok > 0 || (main_pid_ok < 0 && cgroup_ok != 0)) && |
| (s->bus_name_good || s->type != SERVICE_DBUS)) |
| service_set_state(s, SERVICE_RUNNING); |
| else if (s->remain_after_exit) |
| service_set_state(s, SERVICE_EXITED); |
| else |
| service_enter_stop(s, true); |
| } |
| |
| static void service_enter_start_post(Service *s) { |
| int r; |
| assert(s); |
| |
| service_unwatch_control_pid(s); |
| |
| if ((s->control_command = s->exec_command[SERVICE_EXEC_START_POST])) { |
| s->control_command_id = SERVICE_EXEC_START_POST; |
| |
| if ((r = service_spawn(s, |
| s->control_command, |
| true, |
| false, |
| !s->permissions_start_only, |
| !s->root_directory_start_only, |
| false, |
| false, |
| &s->control_pid)) < 0) |
| goto fail; |
| |
| service_set_state(s, SERVICE_START_POST); |
| } else |
| service_enter_running(s, true); |
| |
| return; |
| |
| fail: |
| log_warning("%s failed to run 'start-post' task: %s", s->meta.id, strerror(-r)); |
| service_enter_stop(s, false); |
| } |
| |
| static void service_enter_start(Service *s) { |
| pid_t pid; |
| int r; |
| ExecCommand *c; |
| |
| assert(s); |
| |
| assert(s->exec_command[SERVICE_EXEC_START]); |
| assert(!s->exec_command[SERVICE_EXEC_START]->command_next || s->type == SERVICE_ONESHOT); |
| |
| if (s->type == SERVICE_FORKING) |
| service_unwatch_control_pid(s); |
| else |
| service_unwatch_main_pid(s); |
| |
| if (s->type == SERVICE_FORKING) { |
| s->control_command_id = SERVICE_EXEC_START; |
| c = s->control_command = s->exec_command[SERVICE_EXEC_START]; |
| |
| s->main_command = NULL; |
| } else { |
| s->control_command_id = _SERVICE_EXEC_COMMAND_INVALID; |
| s->control_command = NULL; |
| |
| c = s->main_command = s->exec_command[SERVICE_EXEC_START]; |
| } |
| |
| if ((r = service_spawn(s, |
| c, |
| s->type == SERVICE_FORKING || s->type == SERVICE_DBUS || s->type == SERVICE_NOTIFY, |
| true, |
| true, |
| true, |
| true, |
| s->notify_access != NOTIFY_NONE, |
| &pid)) < 0) |
| goto fail; |
| |
| if (s->type == SERVICE_SIMPLE) { |
| /* For simple services we immediately start |
| * the START_POST binaries. */ |
| |
| service_set_main_pid(s, pid); |
| service_enter_start_post(s); |
| |
| } else if (s->type == SERVICE_FORKING) { |
| |
| /* For forking services we wait until the start |
| * process exited. */ |
| |
| s->control_pid = pid; |
| service_set_state(s, SERVICE_START); |
| |
| } else if (s->type == SERVICE_ONESHOT || |
| s->type == SERVICE_DBUS || |
| s->type == SERVICE_NOTIFY) { |
| |
| /* For oneshot services we wait until the start |
| * process exited, too, but it is our main process. */ |
| |
| /* For D-Bus services we know the main pid right away, |
| * but wait for the bus name to appear on the |
| * bus. Notify services are similar. */ |
| |
| service_set_main_pid(s, pid); |
| service_set_state(s, SERVICE_START); |
| } else |
| assert_not_reached("Unknown service type"); |
| |
| return; |
| |
| fail: |
| log_warning("%s failed to run 'start' task: %s", s->meta.id, strerror(-r)); |
| service_enter_signal(s, SERVICE_FINAL_SIGTERM, false); |
| } |
| |
| static void service_enter_start_pre(Service *s) { |
| int r; |
| |
| assert(s); |
| |
| service_unwatch_control_pid(s); |
| |
| if ((s->control_command = s->exec_command[SERVICE_EXEC_START_PRE])) { |
| s->control_command_id = SERVICE_EXEC_START_PRE; |
| |
| if ((r = service_spawn(s, |
| s->control_command, |
| true, |
| false, |
| !s->permissions_start_only, |
| !s->root_directory_start_only, |
| true, |
| false, |
| &s->control_pid)) < 0) |
| goto fail; |
| |
| service_set_state(s, SERVICE_START_PRE); |
| } else |
| service_enter_start(s); |
| |
| return; |
| |
| fail: |
| log_warning("%s failed to run 'start-pre' task: %s", s->meta.id, strerror(-r)); |
| service_enter_dead(s, false, true); |
| } |
| |
| static void service_enter_restart(Service *s) { |
| int r; |
| DBusError error; |
| |
| assert(s); |
| dbus_error_init(&error); |
| |
| if (s->meta.job) { |
| log_info("Job pending for unit, delaying automatic restart."); |
| |
| if ((r = unit_watch_timer(UNIT(s), s->restart_usec, &s->timer_watch)) < 0) |
| goto fail; |
| } |
| |
| service_enter_dead(s, true, false); |
| |
| if ((r = manager_add_job(s->meta.manager, JOB_START, UNIT(s), JOB_FAIL, false, &error, NULL)) < 0) |
| goto fail; |
| |
| log_debug("%s scheduled restart job.", s->meta.id); |
| return; |
| |
| fail: |
| log_warning("%s failed to schedule restart job: %s", s->meta.id, bus_error(&error, -r)); |
| service_enter_dead(s, false, false); |
| |
| dbus_error_free(&error); |
| } |
| |
| static void service_enter_reload(Service *s) { |
| int r; |
| |
| assert(s); |
| |
| service_unwatch_control_pid(s); |
| |
| if ((s->control_command = s->exec_command[SERVICE_EXEC_RELOAD])) { |
| s->control_command_id = SERVICE_EXEC_RELOAD; |
| |
| if ((r = service_spawn(s, |
| s->control_command, |
| true, |
| false, |
| !s->permissions_start_only, |
| !s->root_directory_start_only, |
| false, |
| false, |
| &s->control_pid)) < 0) |
| goto fail; |
| |
| service_set_state(s, SERVICE_RELOAD); |
| } else |
| service_enter_running(s, true); |
| |
| return; |
| |
| fail: |
| log_warning("%s failed to run 'reload' task: %s", s->meta.id, strerror(-r)); |
| s->reload_failure = true; |
| service_enter_running(s, true); |
| } |
| |
| static void service_run_next_control(Service *s, bool success) { |
| int r; |
| |
| assert(s); |
| assert(s->control_command); |
| assert(s->control_command->command_next); |
| |
| if (!success) |
| s->failure = true; |
| |
| assert(s->control_command_id != SERVICE_EXEC_START); |
| |
| s->control_command = s->control_command->command_next; |
| service_unwatch_control_pid(s); |
| |
| if ((r = service_spawn(s, |
| s->control_command, |
| true, |
| false, |
| !s->permissions_start_only, |
| !s->root_directory_start_only, |
| s->control_command_id == SERVICE_EXEC_START_PRE || |
| s->control_command_id == SERVICE_EXEC_STOP_POST, |
| false, |
| &s->control_pid)) < 0) |
| goto fail; |
| |
| return; |
| |
| fail: |
| log_warning("%s failed to run next control task: %s", s->meta.id, strerror(-r)); |
| |
| if (s->state == SERVICE_START_PRE) |
| service_enter_signal(s, SERVICE_FINAL_SIGTERM, false); |
| else if (s->state == SERVICE_STOP) |
| service_enter_signal(s, SERVICE_STOP_SIGTERM, false); |
| else if (s->state == SERVICE_STOP_POST) |
| service_enter_dead(s, false, true); |
| else if (s->state == SERVICE_RELOAD) { |
| s->reload_failure = true; |
| service_enter_running(s, true); |
| } else |
| service_enter_stop(s, false); |
| } |
| |
| static void service_run_next_main(Service *s, bool success) { |
| pid_t pid; |
| int r; |
| |
| assert(s); |
| assert(s->main_command); |
| assert(s->main_command->command_next); |
| assert(s->type == SERVICE_ONESHOT); |
| |
| if (!success) |
| s->failure = true; |
| |
| s->main_command = s->main_command->command_next; |
| service_unwatch_main_pid(s); |
| |
| if ((r = service_spawn(s, |
| s->main_command, |
| false, |
| true, |
| true, |
| true, |
| true, |
| s->notify_access != NOTIFY_NONE, |
| &pid)) < 0) |
| goto fail; |
| |
| service_set_main_pid(s, pid); |
| |
| return; |
| |
| fail: |
| log_warning("%s failed to run next main task: %s", s->meta.id, strerror(-r)); |
| service_enter_stop(s, false); |
| } |
| |
| static int service_start(Unit *u) { |
| Service *s = SERVICE(u); |
| |
| assert(s); |
| |
| /* We cannot fulfill this request right now, try again later |
| * please! */ |
| if (s->state == SERVICE_STOP || |
| s->state == SERVICE_STOP_SIGTERM || |
| s->state == SERVICE_STOP_SIGKILL || |
| s->state == SERVICE_STOP_POST || |
| s->state == SERVICE_FINAL_SIGTERM || |
| s->state == SERVICE_FINAL_SIGKILL) |
| return -EAGAIN; |
| |
| /* Already on it! */ |
| if (s->state == SERVICE_START_PRE || |
| s->state == SERVICE_START || |
| s->state == SERVICE_START_POST) |
| return 0; |
| |
| assert(s->state == SERVICE_DEAD || s->state == SERVICE_FAILED || s->state == SERVICE_AUTO_RESTART); |
| |
| /* Make sure we don't enter a busy loop of some kind. */ |
| if (!ratelimit_test(&s->ratelimit)) { |
| log_warning("%s start request repeated too quickly, refusing to start.", u->meta.id); |
| return -ECANCELED; |
| } |
| |
| s->failure = false; |
| s->main_pid_known = false; |
| s->main_pid_alien = false; |
| s->forbid_restart = false; |
| |
| service_enter_start_pre(s); |
| return 0; |
| } |
| |
| static int service_stop(Unit *u) { |
| Service *s = SERVICE(u); |
| |
| assert(s); |
| |
| /* This is a user request, so don't do restarts on this |
| * shutdown. */ |
| s->forbid_restart = true; |
| |
| /* Already on it */ |
| if (s->state == SERVICE_STOP || |
| s->state == SERVICE_STOP_SIGTERM || |
| s->state == SERVICE_STOP_SIGKILL || |
| s->state == SERVICE_STOP_POST || |
| s->state == SERVICE_FINAL_SIGTERM || |
| s->state == SERVICE_FINAL_SIGKILL) |
| return 0; |
| |
| /* Don't allow a restart */ |
| if (s->state == SERVICE_AUTO_RESTART) { |
| service_set_state(s, SERVICE_DEAD); |
| return 0; |
| } |
| |
| /* If there's already something running we go directly into |
| * kill mode. */ |
| if (s->state == SERVICE_START_PRE || |
| s->state == SERVICE_START || |
| s->state == SERVICE_START_POST || |
| s->state == SERVICE_RELOAD) { |
| service_enter_signal(s, SERVICE_STOP_SIGTERM, true); |
| return 0; |
| } |
| |
| assert(s->state == SERVICE_RUNNING || |
| s->state == SERVICE_EXITED); |
| |
| service_enter_stop(s, true); |
| return 0; |
| } |
| |
| static int service_reload(Unit *u) { |
| Service *s = SERVICE(u); |
| |
| assert(s); |
| |
| assert(s->state == SERVICE_RUNNING || s->state == SERVICE_EXITED); |
| |
| service_enter_reload(s); |
| return 0; |
| } |
| |
| static bool service_can_reload(Unit *u) { |
| Service *s = SERVICE(u); |
| |
| assert(s); |
| |
| return !!s->exec_command[SERVICE_EXEC_RELOAD]; |
| } |
| |
| static int service_serialize(Unit *u, FILE *f, FDSet *fds) { |
| Service *s = SERVICE(u); |
| |
| assert(u); |
| assert(f); |
| assert(fds); |
| |
| unit_serialize_item(u, f, "state", service_state_to_string(s->state)); |
| unit_serialize_item(u, f, "failure", yes_no(s->failure)); |
| |
| if (s->control_pid > 0) |
| unit_serialize_item_format(u, f, "control-pid", "%lu", (unsigned long) s->control_pid); |
| |
| if (s->main_pid_known && s->main_pid > 0) |
| unit_serialize_item_format(u, f, "main-pid", "%lu", (unsigned long) s->main_pid); |
| |
| unit_serialize_item(u, f, "main-pid-known", yes_no(s->main_pid_known)); |
| |
| if (s->status_text) |
| unit_serialize_item(u, f, "status-text", s->status_text); |
| |
| /* There's a minor uncleanliness here: if there are multiple |
| * commands attached here, we will start from the first one |
| * again */ |
| if (s->control_command_id >= 0) |
| unit_serialize_item(u, f, "control-command", service_exec_command_to_string(s->control_command_id)); |
| |
| if (s->socket_fd >= 0) { |
| int copy; |
| |
| if ((copy = fdset_put_dup(fds, s->socket_fd)) < 0) |
| return copy; |
| |
| unit_serialize_item_format(u, f, "socket-fd", "%i", copy); |
| } |
| |
| if (s->main_exec_status.pid > 0) { |
| unit_serialize_item_format(u, f, "main-exec-status-pid", "%lu", (unsigned long) s->main_exec_status.pid); |
| dual_timestamp_serialize(f, "main-exec-status-start", &s->main_exec_status.start_timestamp); |
| dual_timestamp_serialize(f, "main-exec-status-exit", &s->main_exec_status.exit_timestamp); |
| |
| if (dual_timestamp_is_set(&s->main_exec_status.exit_timestamp)) { |
| unit_serialize_item_format(u, f, "main-exec-status-code", "%i", s->main_exec_status.code); |
| unit_serialize_item_format(u, f, "main-exec-status-status", "%i", s->main_exec_status.status); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int service_deserialize_item(Unit *u, const char *key, const char *value, FDSet *fds) { |
| Service *s = SERVICE(u); |
| |
| assert(u); |
| assert(key); |
| assert(value); |
| assert(fds); |
| |
| if (streq(key, "state")) { |
| ServiceState state; |
| |
| if ((state = service_state_from_string(value)) < 0) |
| log_debug("Failed to parse state value %s", value); |
| else |
| s->deserialized_state = state; |
| } else if (streq(key, "failure")) { |
| int b; |
| |
| if ((b = parse_boolean(value)) < 0) |
| log_debug("Failed to parse failure value %s", value); |
| else |
| s->failure = b || s->failure; |
| } else if (streq(key, "control-pid")) { |
| pid_t pid; |
| |
| if (parse_pid(value, &pid) < 0) |
| log_debug("Failed to parse control-pid value %s", value); |
| else |
| s->control_pid = pid; |
| } else if (streq(key, "main-pid")) { |
| pid_t pid; |
| |
| if (parse_pid(value, &pid) < 0) |
| log_debug("Failed to parse main-pid value %s", value); |
| else |
| service_set_main_pid(s, (pid_t) pid); |
| } else if (streq(key, "main-pid-known")) { |
| int b; |
| |
| if ((b = parse_boolean(value)) < 0) |
| log_debug("Failed to parse main-pid-known value %s", value); |
| else |
| s->main_pid_known = b; |
| } else if (streq(key, "status-text")) { |
| char *t; |
| |
| if ((t = strdup(value))) { |
| free(s->status_text); |
| s->status_text = t; |
| } |
| |
| } else if (streq(key, "control-command")) { |
| ServiceExecCommand id; |
| |
| if ((id = service_exec_command_from_string(value)) < 0) |
| log_debug("Failed to parse exec-command value %s", value); |
| else { |
| s->control_command_id = id; |
| s->control_command = s->exec_command[id]; |
| } |
| } else if (streq(key, "socket-fd")) { |
| int fd; |
| |
| if (safe_atoi(value, &fd) < 0 || fd < 0 || !fdset_contains(fds, fd)) |
| log_debug("Failed to parse socket-fd value %s", value); |
| else { |
| |
| if (s->socket_fd >= 0) |
| close_nointr_nofail(s->socket_fd); |
| s->socket_fd = fdset_remove(fds, fd); |
| } |
| } else if (streq(key, "main-exec-status-pid")) { |
| pid_t pid; |
| |
| if (parse_pid(value, &pid) < 0) |
| log_debug("Failed to parse main-exec-status-pid value %s", value); |
| else |
| s->main_exec_status.pid = pid; |
| } else if (streq(key, "main-exec-status-code")) { |
| int i; |
| |
| if (safe_atoi(value, &i) < 0) |
| log_debug("Failed to parse main-exec-status-code value %s", value); |
| else |
| s->main_exec_status.code = i; |
| } else if (streq(key, "main-exec-status-status")) { |
| int i; |
| |
| if (safe_atoi(value, &i) < 0) |
| log_debug("Failed to parse main-exec-status-status value %s", value); |
| else |
| s->main_exec_status.status = i; |
| } else if (streq(key, "main-exec-status-start")) |
| dual_timestamp_deserialize(value, &s->main_exec_status.start_timestamp); |
| else if (streq(key, "main-exec-status-exit")) |
| dual_timestamp_deserialize(value, &s->main_exec_status.exit_timestamp); |
| else |
| log_debug("Unknown serialization key '%s'", key); |
| |
| return 0; |
| } |
| |
| static UnitActiveState service_active_state(Unit *u) { |
| assert(u); |
| |
| return state_translation_table[SERVICE(u)->state]; |
| } |
| |
| static const char *service_sub_state_to_string(Unit *u) { |
| assert(u); |
| |
| return service_state_to_string(SERVICE(u)->state); |
| } |
| |
| static bool service_check_gc(Unit *u) { |
| Service *s = SERVICE(u); |
| |
| assert(s); |
| |
| /* Never clean up services that still have a process around, |
| * even if the service is formally dead. */ |
| if (cgroup_good(s) > 0 || |
| main_pid_good(s) > 0 || |
| control_pid_good(s) > 0) |
| return true; |
| |
| #ifdef HAVE_SYSV_COMPAT |
| if (s->sysv_path) |
| return true; |
| #endif |
| |
| return false; |
| } |
| |
| static bool service_check_snapshot(Unit *u) { |
| Service *s = SERVICE(u); |
| |
| assert(s); |
| |
| return !s->got_socket_fd; |
| } |
| |
| static void service_sigchld_event(Unit *u, pid_t pid, int code, int status) { |
| Service *s = SERVICE(u); |
| bool success; |
| |
| assert(s); |
| assert(pid >= 0); |
| |
| if (!s->meta.fragment_path) |
| success = is_clean_exit_lsb(code, status); |
| else |
| success = is_clean_exit(code, status); |
| |
| if (s->main_pid == pid) { |
| /* Forking services may occasionally move to a new PID. |
| * As long as they update the PID file before exiting the old |
| * PID, they're fine. */ |
| if (service_load_pid_file(s, false) == 0) |
| return; |
| |
| s->main_pid = 0; |
| exec_status_exit(&s->main_exec_status, &s->exec_context, pid, code, status); |
| |
| /* If this is not a forking service than the main |
| * process got started and hence we copy the exit |
| * status so that it is recorded both as main and as |
| * control process exit status */ |
| if (s->main_command) { |
| s->main_command->exec_status = s->main_exec_status; |
| |
| if (s->main_command->ignore) |
| success = true; |
| } |
| |
| log_full(success ? LOG_DEBUG : LOG_NOTICE, |
| "%s: main process exited, code=%s, status=%i", u->meta.id, sigchld_code_to_string(code), status); |
| s->failure = s->failure || !success; |
| |
| if (s->main_command && |
| s->main_command->command_next && |
| success) { |
| |
| /* There is another command to * |
| * execute, so let's do that. */ |
| |
| log_debug("%s running next main command for state %s", u->meta.id, service_state_to_string(s->state)); |
| service_run_next_main(s, success); |
| |
| } else { |
| |
| /* The service exited, so the service is officially |
| * gone. */ |
| s->main_command = NULL; |
| |
| switch (s->state) { |
| |
| case SERVICE_START_POST: |
| case SERVICE_RELOAD: |
| case SERVICE_STOP: |
| /* Need to wait until the operation is |
| * done */ |
| break; |
| |
| case SERVICE_START: |
| if (s->type == SERVICE_ONESHOT) { |
| /* This was our main goal, so let's go on */ |
| if (success) |
| service_enter_start_post(s); |
| else |
| service_enter_signal(s, SERVICE_FINAL_SIGTERM, false); |
| break; |
| } else { |
| assert(s->type == SERVICE_DBUS || s->type == SERVICE_NOTIFY); |
| |
| /* Fall through */ |
| } |
| |
| case SERVICE_RUNNING: |
| service_enter_running(s, success); |
| break; |
| |
| case SERVICE_STOP_SIGTERM: |
| case SERVICE_STOP_SIGKILL: |
| |
| if (!control_pid_good(s)) |
| service_enter_stop_post(s, success); |
| |
| /* If there is still a control process, wait for that first */ |
| break; |
| |
| default: |
| assert_not_reached("Uh, main process died at wrong time."); |
| } |
| } |
| |
| } else if (s->control_pid == pid) { |
| |
| s->control_pid = 0; |
| |
| if (s->control_command) { |
| exec_status_exit(&s->control_command->exec_status, &s->exec_context, pid, code, status); |
| |
| if (s->control_command->ignore) |
| success = true; |
| } |
| |
| log_full(success ? LOG_DEBUG : LOG_NOTICE, |
| "%s: control process exited, code=%s status=%i", u->meta.id, sigchld_code_to_string(code), status); |
| s->failure = s->failure || !success; |
| |
| if (s->control_command && |
| s->control_command->command_next && |
| success) { |
| |
| /* There is another command to * |
| * execute, so let's do that. */ |
| |
| log_debug("%s running next control command for state %s", u->meta.id, service_state_to_string(s->state)); |
| service_run_next_control(s, success); |
| |
| } else { |
| /* No further commands for this step, so let's |
| * figure out what to do next */ |
| |
| s->control_command = NULL; |
| s->control_command_id = _SERVICE_EXEC_COMMAND_INVALID; |
| |
| log_debug("%s got final SIGCHLD for state %s", u->meta.id, service_state_to_string(s->state)); |
| |
| switch (s->state) { |
| |
| case SERVICE_START_PRE: |
| if (success) |
| service_enter_start(s); |
| else |
| service_enter_signal(s, SERVICE_FINAL_SIGTERM, false); |
| break; |
| |
| case SERVICE_START: |
| assert(s->type == SERVICE_FORKING); |
| |
| /* Let's try to load the pid |
| * file here if we can. We |
| * ignore the return value, |
| * since the PID file might |
| * actually be created by a |
| * START_POST script */ |
| |
| if (success) { |
| service_load_pid_file(s, !s->exec_command[SERVICE_EXEC_START_POST]); |
| service_search_main_pid(s); |
| |
| service_enter_start_post(s); |
| } else |
| service_enter_signal(s, SERVICE_FINAL_SIGTERM, false); |
| |
| break; |
| |
| case SERVICE_START_POST: |
| if (success) { |
| service_load_pid_file(s, true); |
| service_search_main_pid(s); |
| } |
| |
| s->reload_failure = !success; |
| service_enter_running(s, true); |
| break; |
| |
| case SERVICE_RELOAD: |
| if (success) { |
| service_load_pid_file(s, true); |
| service_search_main_pid(s); |
| } |
| |
| s->reload_failure = !success; |
| service_enter_running(s, true); |
| break; |
| |
| case SERVICE_STOP: |
| service_enter_signal(s, SERVICE_STOP_SIGTERM, success); |
| break; |
| |
| case SERVICE_STOP_SIGTERM: |
| case SERVICE_STOP_SIGKILL: |
| if (main_pid_good(s) <= 0) |
| service_enter_stop_post(s, success); |
| |
| /* If there is still a service |
| * process around, wait until |
| * that one quit, too */ |
| break; |
| |
| case SERVICE_STOP_POST: |
| case SERVICE_FINAL_SIGTERM: |
| case SERVICE_FINAL_SIGKILL: |
| service_enter_dead(s, success, true); |
| break; |
| |
| default: |
| assert_not_reached("Uh, control process died at wrong time."); |
| } |
| } |
| } |
| |
| /* Notify clients about changed exit status */ |
| unit_add_to_dbus_queue(u); |
| } |
| |
| static void service_timer_event(Unit *u, uint64_t elapsed, Watch* w) { |
| Service *s = SERVICE(u); |
| |
| assert(s); |
| assert(elapsed == 1); |
| |
| assert(w == &s->timer_watch); |
| |
| switch (s->state) { |
| |
| case SERVICE_START_PRE: |
| case SERVICE_START: |
| log_warning("%s operation timed out. Terminating.", u->meta.id); |
| service_enter_signal(s, SERVICE_FINAL_SIGTERM, false); |
| break; |
| |
| case SERVICE_START_POST: |
| log_warning("%s operation timed out. Stopping.", u->meta.id); |
| service_enter_stop(s, false); |
| break; |
| |
| case SERVICE_RELOAD: |
| log_warning("%s operation timed out. Stopping.", u->meta.id); |
| s->reload_failure = true; |
| service_enter_running(s, true); |
| break; |
| |
| case SERVICE_STOP: |
| log_warning("%s stopping timed out. Terminating.", u->meta.id); |
| service_enter_signal(s, SERVICE_STOP_SIGTERM, false); |
| break; |
| |
| case SERVICE_STOP_SIGTERM: |
| if (s->exec_context.send_sigkill) { |
| log_warning("%s stopping timed out. Killing.", u->meta.id); |
| service_enter_signal(s, SERVICE_STOP_SIGKILL, false); |
| } else { |
| log_warning("%s stopping timed out. Skipping SIGKILL.", u->meta.id); |
| service_enter_stop_post(s, false); |
| } |
| |
| break; |
| |
| case SERVICE_STOP_SIGKILL: |
| /* Uh, we sent a SIGKILL and it is still not gone? |
| * Must be something we cannot kill, so let's just be |
| * weirded out and continue */ |
| |
| log_warning("%s still around after SIGKILL. Ignoring.", u->meta.id); |
| service_enter_stop_post(s, false); |
| break; |
| |
| case SERVICE_STOP_POST: |
| log_warning("%s stopping timed out (2). Terminating.", u->meta.id); |
| service_enter_signal(s, SERVICE_FINAL_SIGTERM, false); |
| break; |
| |
| case SERVICE_FINAL_SIGTERM: |
| if (s->exec_context.send_sigkill) { |
| log_warning("%s stopping timed out (2). Killing.", u->meta.id); |
| service_enter_signal(s, SERVICE_FINAL_SIGKILL, false); |
| } else { |
| log_warning("%s stopping timed out (2). Skipping SIGKILL. Entering failed mode.", u->meta.id); |
| service_enter_dead(s, false, true); |
| } |
| |
| break; |
| |
| case SERVICE_FINAL_SIGKILL: |
| log_warning("%s still around after SIGKILL (2). Entering failed mode.", u->meta.id); |
| service_enter_dead(s, false, true); |
| break; |
| |
| case SERVICE_AUTO_RESTART: |
| log_info("%s holdoff time over, scheduling restart.", u->meta.id); |
| service_enter_restart(s); |
| break; |
| |
| default: |
| assert_not_reached("Timeout at wrong time."); |
| } |
| } |
| |
| static void service_cgroup_notify_event(Unit *u) { |
| Service *s = SERVICE(u); |
| |
| assert(u); |
| |
| log_debug("%s: cgroup is empty", u->meta.id); |
| |
| switch (s->state) { |
| |
| /* Waiting for SIGCHLD is usually more interesting, |
| * because it includes return codes/signals. Which is |
| * why we ignore the cgroup events for most cases, |
| * except when we don't know pid which to expect the |
| * SIGCHLD for. */ |
| |
| case SERVICE_RUNNING: |
| service_enter_running(s, true); |
| break; |
| |
| case SERVICE_STOP_SIGTERM: |
| case SERVICE_STOP_SIGKILL: |
| |
| if (main_pid_good(s) <= 0 && !control_pid_good(s)) |
| service_enter_stop_post(s, true); |
| |
| break; |
| |
| case SERVICE_FINAL_SIGTERM: |
| case SERVICE_FINAL_SIGKILL: |
| if (main_pid_good(s) <= 0 && !control_pid_good(s)) |
| service_enter_dead(s, true, true); |
| |
| break; |
| |
| default: |
| ; |
| } |
| } |
| |
| static void service_notify_message(Unit *u, pid_t pid, char **tags) { |
| Service *s = SERVICE(u); |
| const char *e; |
| |
| assert(u); |
| |
| if (s->notify_access == NOTIFY_NONE) { |
| log_warning("%s: Got notification message from PID %lu, but reception is disabled.", |
| u->meta.id, (unsigned long) pid); |
| return; |
| } |
| |
| if (s->notify_access == NOTIFY_MAIN && pid != s->main_pid) { |
| log_warning("%s: Got notification message from PID %lu, but reception only permitted for PID %lu", |
| u->meta.id, (unsigned long) pid, (unsigned long) s->main_pid); |
| return; |
| } |
| |
| log_debug("%s: Got message", u->meta.id); |
| |
| /* Interpret MAINPID= */ |
| if ((e = strv_find_prefix(tags, "MAINPID=")) && |
| (s->state == SERVICE_START || |
| s->state == SERVICE_START_POST || |
| s->state == SERVICE_RUNNING || |
| s->state == SERVICE_RELOAD)) { |
| |
| if (parse_pid(e + 8, &pid) < 0) |
| log_warning("Failed to parse notification message %s", e); |
| else { |
| log_debug("%s: got %s", u->meta.id, e); |
| service_set_main_pid(s, pid); |
| } |
| } |
| |
| /* Interpret READY= */ |
| if (s->type == SERVICE_NOTIFY && |
| s->state == SERVICE_START && |
| strv_find(tags, "READY=1")) { |
| log_debug("%s: got READY=1", u->meta.id); |
| |
| service_enter_start_post(s); |
| } |
| |
| /* Interpret STATUS= */ |
| if ((e = strv_find_prefix(tags, "STATUS="))) { |
| char *t; |
| |
| if (e[7]) { |
| if (!(t = strdup(e+7))) { |
| log_error("Failed to allocate string."); |
| return; |
| } |
| |
| log_debug("%s: got %s", u->meta.id, e); |
| |
| free(s->status_text); |
| s->status_text = t; |
| } else { |
| free(s->status_text); |
| s->status_text = NULL; |
| } |
| |
| } |
| |
| /* Notify clients about changed status or main pid */ |
| unit_add_to_dbus_queue(u); |
| } |
| |
| #ifdef HAVE_SYSV_COMPAT |
| |
| #ifdef TARGET_SUSE |
| static void sysv_facility_in_insserv_conf(Manager *mgr) { |
| FILE *f=NULL; |
| int r; |
| |
| if (!(f = fopen("/etc/insserv.conf", "re"))) { |
| r = errno == ENOENT ? 0 : -errno; |
| goto finish; |
| } |
| |
| while (!feof(f)) { |
| char l[LINE_MAX], *t; |
| char **parsed = NULL; |
| |
| if (!fgets(l, sizeof(l), f)) { |
| if (feof(f)) |
| break; |
| |
| r = -errno; |
| log_error("Failed to read configuration file '/etc/insserv.conf': %s", strerror(-r)); |
| goto finish; |
| } |
| |
| t = strstrip(l); |
| if (*t != '$' && *t != '<') |
| continue; |
| |
| parsed = strv_split(t,WHITESPACE); |
| /* we ignore <interactive>, not used, equivalent to X-Interactive */ |
| if (parsed && !startswith_no_case (parsed[0], "<interactive>")) { |
| char *facility; |
| Unit *u; |
| if (sysv_translate_facility(parsed[0], NULL, &facility) < 0) |
| continue; |
| if ((u = manager_get_unit(mgr, facility)) && (u->meta.type == UNIT_TARGET)) { |
| UnitDependency e; |
| char *dep = NULL, *name, **j; |
| |
| STRV_FOREACH (j, parsed+1) { |
| if (*j[0]=='+') { |
| e = UNIT_WANTS; |
| name = *j+1; |
| } |
| else { |
| e = UNIT_REQUIRES; |
| name = *j; |
| } |
| if (sysv_translate_facility(name, NULL, &dep) < 0) |
| continue; |
| |
| r = unit_add_two_dependencies_by_name(u, UNIT_BEFORE, e, dep, NULL, true); |
| free(dep); |
| } |
| } |
| free(facility); |
| } |
| strv_free(parsed); |
| } |
| finish: |
| if (f) |
| fclose(f); |
| |
| } |
| #endif |
| |
| static int service_enumerate(Manager *m) { |
| char **p; |
| unsigned i; |
| DIR *d = NULL; |
| char *path = NULL, *fpath = NULL, *name = NULL; |
| Set *runlevel_services[ELEMENTSOF(rcnd_table)], *shutdown_services = NULL; |
| Unit *service; |
| Iterator j; |
| int r; |
| |
| assert(m); |
| |
| if (m->running_as != MANAGER_SYSTEM) |
| return 0; |
| |
| zero(runlevel_services); |
| |
| STRV_FOREACH(p, m->lookup_paths.sysvrcnd_path) |
| for (i = 0; i < ELEMENTSOF(rcnd_table); i ++) { |
| struct dirent *de; |
| |
| free(path); |
| path = join(*p, "/", rcnd_table[i].path, NULL); |
| if (!path) { |
| r = -ENOMEM; |
| goto finish; |
| } |
| |
| if (d) |
| closedir(d); |
| |
| if (!(d = opendir(path))) { |
| if (errno != ENOENT) |
| log_warning("opendir() failed on %s: %s", path, strerror(errno)); |
| |
| continue; |
| } |
| |
| while ((de = readdir(d))) { |
| int a, b; |
| |
| if (ignore_file(de->d_name)) |
| continue; |
| |
| if (de->d_name[0] != 'S' && de->d_name[0] != 'K') |
| continue; |
| |
| if (strlen(de->d_name) < 4) |
| continue; |
| |
| a = undecchar(de->d_name[1]); |
| b = undecchar(de->d_name[2]); |
| |
| if (a < 0 || b < 0) |
| continue; |
| |
| free(fpath); |
| fpath = join(path, "/", de->d_name, NULL); |
| if (!fpath) { |
| r = -ENOMEM; |
| goto finish; |
| } |
| |
| if (access(fpath, X_OK) < 0) { |
| |
| if (errno != ENOENT) |
| log_warning("access() failed on %s: %s", fpath, strerror(errno)); |
| |
| continue; |
| } |
| |
| free(name); |
| if (!(name = sysv_translate_name(de->d_name + 3))) { |
| r = -ENOMEM; |
| goto finish; |
| } |
| |
| if ((r = manager_load_unit_prepare(m, name, NULL, NULL, &service)) < 0) { |
| log_warning("Failed to prepare unit %s: %s", name, strerror(-r)); |
| continue; |
| } |
| |
| if (de->d_name[0] == 'S') { |
| |
| if (rcnd_table[i].type == RUNLEVEL_UP || rcnd_table[i].type == RUNLEVEL_SYSINIT) { |
| SERVICE(service)->sysv_start_priority_from_rcnd = |
| MAX(a*10 + b, SERVICE(service)->sysv_start_priority_from_rcnd); |
| |
| SERVICE(service)->sysv_enabled = true; |
| } |
| |
| if ((r = set_ensure_allocated(&runlevel_services[i], trivial_hash_func, trivial_compare_func)) < 0) |
| goto finish; |
| |
| if ((r = set_put(runlevel_services[i], service)) < 0) |
| goto finish; |
| |
| } else if (de->d_name[0] == 'K' && |
| (rcnd_table[i].type == RUNLEVEL_DOWN || |
| rcnd_table[i].type == RUNLEVEL_SYSINIT)) { |
| |
| if ((r = set_ensure_allocated(&shutdown_services, trivial_hash_func, trivial_compare_func)) < 0) |
| goto finish; |
| |
| if ((r = set_put(shutdown_services, service)) < 0) |
| goto finish; |
| } |
| } |
| } |
| |
| /* Now we loaded all stubs and are aware of the lowest |
| start-up priority for all services, not let's actually load |
| the services, this will also tell us which services are |
| actually native now */ |
| manager_dispatch_load_queue(m); |
| |
| /* If this is a native service, rely on native ways to pull in |
| * a service, don't pull it in via sysv rcN.d links. */ |
| for (i = 0; i < ELEMENTSOF(rcnd_table); i ++) |
| SET_FOREACH(service, runlevel_services[i], j) { |
| service = unit_follow_merge(service); |
| |
| if (service->meta.fragment_path) |
| continue; |
| |
| if ((r = unit_add_two_dependencies_by_name_inverse(service, UNIT_AFTER, UNIT_WANTS, rcnd_table[i].target, NULL, true)) < 0) |
| goto finish; |
| } |
| |
| /* We honour K links only for halt/reboot. For the normal |
| * runlevels we assume the stop jobs will be implicitly added |
| * by the core logic. Also, we don't really distinguish here |
| * between the runlevels 0 and 6 and just add them to the |
| * special shutdown target. On SUSE the boot.d/ runlevel is |
| * also used for shutdown, so we add links for that too to the |
| * shutdown target.*/ |
| SET_FOREACH(service, shutdown_services, j) { |
| service = unit_follow_merge(service); |
| |
| if (service->meta.fragment_path) |
| continue; |
| |
| if ((r = unit_add_two_dependencies_by_name(service, UNIT_BEFORE, UNIT_CONFLICTS, SPECIAL_SHUTDOWN_TARGET, NULL, true)) < 0) |
| goto finish; |
| } |
| |
| r = 0; |
| |
| #ifdef TARGET_SUSE |
| sysv_facility_in_insserv_conf (m); |
| #endif |
| |
| finish: |
| free(path); |
| free(fpath); |
| free(name); |
| |
| for (i = 0; i < ELEMENTSOF(rcnd_table); i++) |
| set_free(runlevel_services[i]); |
| set_free(shutdown_services); |
| |
| if (d) |
| closedir(d); |
| |
| return r; |
| } |
| #endif |
| |
| static void service_bus_name_owner_change( |
| Unit *u, |
| const char *name, |
| const char *old_owner, |
| const char *new_owner) { |
| |
| Service *s = SERVICE(u); |
| |
| assert(s); |
| assert(name); |
| |
| assert(streq(s->bus_name, name)); |
| assert(old_owner || new_owner); |
| |
| if (old_owner && new_owner) |
| log_debug("%s's D-Bus name %s changed owner from %s to %s", u->meta.id, name, old_owner, new_owner); |
| else if (old_owner) |
| log_debug("%s's D-Bus name %s no longer registered by %s", u->meta.id, name, old_owner); |
| else |
| log_debug("%s's D-Bus name %s now registered by %s", u->meta.id, name, new_owner); |
| |
| s->bus_name_good = !!new_owner; |
| |
| if (s->type == SERVICE_DBUS) { |
| |
| /* service_enter_running() will figure out what to |
| * do */ |
| if (s->state == SERVICE_RUNNING) |
| service_enter_running(s, true); |
| else if (s->state == SERVICE_START && new_owner) |
| service_enter_start_post(s); |
| |
| } else if (new_owner && |
| s->main_pid <= 0 && |
| (s->state == SERVICE_START || |
| s->state == SERVICE_START_POST || |
| s->state == SERVICE_RUNNING || |
| s->state == SERVICE_RELOAD)) { |
| |
| /* Try to acquire PID from bus service */ |
| log_debug("Trying to acquire PID from D-Bus name..."); |
| |
| bus_query_pid(u->meta.manager, name); |
| } |
| } |
| |
| static void service_bus_query_pid_done( |
| Unit *u, |
| const char *name, |
| pid_t pid) { |
| |
| Service *s = SERVICE(u); |
| |
| assert(s); |
| assert(name); |
| |
| log_debug("%s's D-Bus name %s is now owned by process %u", u->meta.id, name, (unsigned) pid); |
| |
| if (s->main_pid <= 0 && |
| (s->state == SERVICE_START || |
| s->state == SERVICE_START_POST || |
| s->state == SERVICE_RUNNING || |
| s->state == SERVICE_RELOAD)) |
| service_set_main_pid(s, pid); |
| } |
| |
| int service_set_socket_fd(Service *s, int fd, Socket *sock) { |
| assert(s); |
| assert(fd >= 0); |
| |
| /* This is called by the socket code when instantiating a new |
| * service for a stream socket and the socket needs to be |
| * configured. */ |
| |
| if (s->meta.load_state != UNIT_LOADED) |
| return -EINVAL; |
| |
| if (s->socket_fd >= 0) |
| return -EBUSY; |
| |
| if (s->state != SERVICE_DEAD) |
| return -EAGAIN; |
| |
| s->socket_fd = fd; |
| s->got_socket_fd = true; |
| s->accept_socket = sock; |
| |
| return 0; |
| } |
| |
| static void service_reset_failed(Unit *u) { |
| Service *s = SERVICE(u); |
| |
| assert(s); |
| |
| if (s->state == SERVICE_FAILED) |
| service_set_state(s, SERVICE_DEAD); |
| |
| s->failure = false; |
| } |
| |
| static bool service_need_daemon_reload(Unit *u) { |
| Service *s = SERVICE(u); |
| |
| assert(s); |
| |
| #ifdef HAVE_SYSV_COMPAT |
| if (s->sysv_path) { |
| struct stat st; |
| |
| zero(st); |
| if (stat(s->sysv_path, &st) < 0) |
| /* What, cannot access this anymore? */ |
| return true; |
| |
| if (s->sysv_mtime > 0 && |
| timespec_load(&st.st_mtim) != s->sysv_mtime) |
| return true; |
| } |
| #endif |
| |
| return false; |
| } |
| |
| static int service_kill(Unit *u, KillWho who, KillMode mode, int signo, DBusError *error) { |
| Service *s = SERVICE(u); |
| int r = 0; |
| Set *pid_set = NULL; |
| |
| assert(s); |
| |
| if (s->main_pid <= 0 && who == KILL_MAIN) { |
| dbus_set_error(error, BUS_ERROR_NO_SUCH_PROCESS, "No main process to kill"); |
| return -ESRCH; |
| } |
| |
| if (s->control_pid <= 0 && who == KILL_CONTROL) { |
| dbus_set_error(error, BUS_ERROR_NO_SUCH_PROCESS, "No control process to kill"); |
| return -ESRCH; |
| } |
| |
| if (who == KILL_CONTROL || who == KILL_ALL) |
| if (s->control_pid > 0) |
| if (kill(s->control_pid, signo) < 0) |
| r = -errno; |
| |
| if (who == KILL_MAIN || who == KILL_ALL) |
| if (s->main_pid > 0) |
| if (kill(s->main_pid, signo) < 0) |
| r = -errno; |
| |
| if (who == KILL_ALL && mode == KILL_CONTROL_GROUP) { |
| int q; |
| |
| if (!(pid_set = set_new(trivial_hash_func, trivial_compare_func))) |
| return -ENOMEM; |
| |
| /* Exclude the control/main pid from being killed via the cgroup */ |
| if (s->control_pid > 0) |
| if ((q = set_put(pid_set, LONG_TO_PTR(s->control_pid))) < 0) { |
| r = q; |
| goto finish; |
| } |
| |
| if (s->main_pid > 0) |
| if ((q = set_put(pid_set, LONG_TO_PTR(s->main_pid))) < 0) { |
| r = q; |
| goto finish; |
| } |
| |
| if ((q = cgroup_bonding_kill_list(s->meta.cgroup_bondings, signo, false, pid_set)) < 0) |
| if (q != -EAGAIN && q != -ESRCH && q != -ENOENT) |
| r = q; |
| } |
| |
| finish: |
| if (pid_set) |
| set_free(pid_set); |
| |
| return r; |
| } |
| |
| static const char* const service_state_table[_SERVICE_STATE_MAX] = { |
| [SERVICE_DEAD] = "dead", |
| [SERVICE_START_PRE] = "start-pre", |
| [SERVICE_START] = "start", |
| [SERVICE_START_POST] = "start-post", |
| [SERVICE_RUNNING] = "running", |
| [SERVICE_EXITED] = "exited", |
| [SERVICE_RELOAD] = "reload", |
| [SERVICE_STOP] = "stop", |
| [SERVICE_STOP_SIGTERM] = "stop-sigterm", |
| [SERVICE_STOP_SIGKILL] = "stop-sigkill", |
| [SERVICE_STOP_POST] = "stop-post", |
| [SERVICE_FINAL_SIGTERM] = "final-sigterm", |
| [SERVICE_FINAL_SIGKILL] = "final-sigkill", |
| [SERVICE_FAILED] = "failed", |
| [SERVICE_AUTO_RESTART] = "auto-restart", |
| }; |
| |
| DEFINE_STRING_TABLE_LOOKUP(service_state, ServiceState); |
| |
| static const char* const service_restart_table[_SERVICE_RESTART_MAX] = { |
| [SERVICE_RESTART_NO] = "no", |
| [SERVICE_RESTART_ON_SUCCESS] = "on-success", |
| [SERVICE_RESTART_ON_FAILURE] = "on-failure", |
| [SERVICE_RESTART_ON_ABORT] = "on-abort", |
| [SERVICE_RESTART_ALWAYS] = "always" |
| }; |
| |
| DEFINE_STRING_TABLE_LOOKUP(service_restart, ServiceRestart); |
| |
| static const char* const service_type_table[_SERVICE_TYPE_MAX] = { |
| [SERVICE_SIMPLE] = "simple", |
| [SERVICE_FORKING] = "forking", |
| [SERVICE_ONESHOT] = "oneshot", |
| [SERVICE_DBUS] = "dbus", |
| [SERVICE_NOTIFY] = "notify" |
| }; |
| |
| DEFINE_STRING_TABLE_LOOKUP(service_type, ServiceType); |
| |
| static const char* const service_exec_command_table[_SERVICE_EXEC_COMMAND_MAX] = { |
| [SERVICE_EXEC_START_PRE] = "ExecStartPre", |
| [SERVICE_EXEC_START] = "ExecStart", |
| [SERVICE_EXEC_START_POST] = "ExecStartPost", |
| [SERVICE_EXEC_RELOAD] = "ExecReload", |
| [SERVICE_EXEC_STOP] = "ExecStop", |
| [SERVICE_EXEC_STOP_POST] = "ExecStopPost", |
| }; |
| |
| DEFINE_STRING_TABLE_LOOKUP(service_exec_command, ServiceExecCommand); |
| |
| static const char* const notify_access_table[_NOTIFY_ACCESS_MAX] = { |
| [NOTIFY_NONE] = "none", |
| [NOTIFY_MAIN] = "main", |
| [NOTIFY_ALL] = "all" |
| }; |
| |
| DEFINE_STRING_TABLE_LOOKUP(notify_access, NotifyAccess); |
| |
| const UnitVTable service_vtable = { |
| .suffix = ".service", |
| .sections = |
| "Unit\0" |
| "Service\0" |
| "Install\0", |
| .show_status = true, |
| |
| .init = service_init, |
| .done = service_done, |
| .load = service_load, |
| |
| .coldplug = service_coldplug, |
| |
| .dump = service_dump, |
| |
| .start = service_start, |
| .stop = service_stop, |
| .reload = service_reload, |
| |
| .can_reload = service_can_reload, |
| |
| .kill = service_kill, |
| |
| .serialize = service_serialize, |
| .deserialize_item = service_deserialize_item, |
| |
| .active_state = service_active_state, |
| .sub_state_to_string = service_sub_state_to_string, |
| |
| .check_gc = service_check_gc, |
| .check_snapshot = service_check_snapshot, |
| |
| .sigchld_event = service_sigchld_event, |
| .timer_event = service_timer_event, |
| |
| .reset_failed = service_reset_failed, |
| |
| .need_daemon_reload = service_need_daemon_reload, |
| |
| .cgroup_notify_empty = service_cgroup_notify_event, |
| .notify_message = service_notify_message, |
| |
| .bus_name_owner_change = service_bus_name_owner_change, |
| .bus_query_pid_done = service_bus_query_pid_done, |
| |
| .bus_interface = "org.freedesktop.systemd1.Service", |
| .bus_message_handler = bus_service_message_handler, |
| .bus_invalidating_properties = bus_service_invalidating_properties, |
| |
| #ifdef HAVE_SYSV_COMPAT |
| .enumerate = service_enumerate |
| #endif |
| }; |