| /* SPDX-License-Identifier: LicenseRef-crc32-no-restriction */ |
| /* This is copied from util-linux, which in turn copied in the version from Gary S. Brown */ |
| |
| /* |
| * COPYRIGHT (C) 1986 Gary S. Brown. You may use this program, or |
| * code or tables extracted from it, as desired without restriction. |
| * |
| * First, the polynomial itself and its table of feedback terms. The |
| * polynomial is |
| * X^32+X^26+X^23+X^22+X^16+X^12+X^11+X^10+X^8+X^7+X^5+X^4+X^2+X^1+X^0 |
| * |
| * Note that we take it "backwards" and put the highest-order term in |
| * the lowest-order bit. The X^32 term is "implied"; the LSB is the |
| * X^31 term, etc. The X^0 term (usually shown as "+1") results in |
| * the MSB being 1. |
| * |
| * Note that the usual hardware shift register implementation, which |
| * is what we're using (we're merely optimizing it by doing eight-bit |
| * chunks at a time) shifts bits into the lowest-order term. In our |
| * implementation, that means shifting towards the right. Why do we |
| * do it this way? Because the calculated CRC must be transmitted in |
| * order from highest-order term to lowest-order term. UARTs transmit |
| * characters in order from LSB to MSB. By storing the CRC this way, |
| * we hand it to the UART in the order low-byte to high-byte; the UART |
| * sends each low-bit to high-bit; and the result is transmission bit |
| * by bit from highest- to lowest-order term without requiring any bit |
| * shuffling on our part. Reception works similarly. |
| * |
| * The feedback terms table consists of 256, 32-bit entries. Notes |
| * |
| * The table can be generated at runtime if desired; code to do so |
| * is shown later. It might not be obvious, but the feedback |
| * terms simply represent the results of eight shift/xor opera- |
| * tions for all combinations of data and CRC register values. |
| * |
| * The values must be right-shifted by eight bits by the "updcrc" |
| * logic; the shift must be unsigned (bring in zeroes). On some |
| * hardware you could probably optimize the shift in assembler by |
| * using byte-swap instructions. |
| * polynomial $edb88320 |
| * |
| */ |
| |
| #include "crc32.h" |
| |
| static const UINT32 crc32_tab[] = { |
| 0x00000000L, 0x77073096L, 0xee0e612cL, 0x990951baL, 0x076dc419L, |
| 0x706af48fL, 0xe963a535L, 0x9e6495a3L, 0x0edb8832L, 0x79dcb8a4L, |
| 0xe0d5e91eL, 0x97d2d988L, 0x09b64c2bL, 0x7eb17cbdL, 0xe7b82d07L, |
| 0x90bf1d91L, 0x1db71064L, 0x6ab020f2L, 0xf3b97148L, 0x84be41deL, |
| 0x1adad47dL, 0x6ddde4ebL, 0xf4d4b551L, 0x83d385c7L, 0x136c9856L, |
| 0x646ba8c0L, 0xfd62f97aL, 0x8a65c9ecL, 0x14015c4fL, 0x63066cd9L, |
| 0xfa0f3d63L, 0x8d080df5L, 0x3b6e20c8L, 0x4c69105eL, 0xd56041e4L, |
| 0xa2677172L, 0x3c03e4d1L, 0x4b04d447L, 0xd20d85fdL, 0xa50ab56bL, |
| 0x35b5a8faL, 0x42b2986cL, 0xdbbbc9d6L, 0xacbcf940L, 0x32d86ce3L, |
| 0x45df5c75L, 0xdcd60dcfL, 0xabd13d59L, 0x26d930acL, 0x51de003aL, |
| 0xc8d75180L, 0xbfd06116L, 0x21b4f4b5L, 0x56b3c423L, 0xcfba9599L, |
| 0xb8bda50fL, 0x2802b89eL, 0x5f058808L, 0xc60cd9b2L, 0xb10be924L, |
| 0x2f6f7c87L, 0x58684c11L, 0xc1611dabL, 0xb6662d3dL, 0x76dc4190L, |
| 0x01db7106L, 0x98d220bcL, 0xefd5102aL, 0x71b18589L, 0x06b6b51fL, |
| 0x9fbfe4a5L, 0xe8b8d433L, 0x7807c9a2L, 0x0f00f934L, 0x9609a88eL, |
| 0xe10e9818L, 0x7f6a0dbbL, 0x086d3d2dL, 0x91646c97L, 0xe6635c01L, |
| 0x6b6b51f4L, 0x1c6c6162L, 0x856530d8L, 0xf262004eL, 0x6c0695edL, |
| 0x1b01a57bL, 0x8208f4c1L, 0xf50fc457L, 0x65b0d9c6L, 0x12b7e950L, |
| 0x8bbeb8eaL, 0xfcb9887cL, 0x62dd1ddfL, 0x15da2d49L, 0x8cd37cf3L, |
| 0xfbd44c65L, 0x4db26158L, 0x3ab551ceL, 0xa3bc0074L, 0xd4bb30e2L, |
| 0x4adfa541L, 0x3dd895d7L, 0xa4d1c46dL, 0xd3d6f4fbL, 0x4369e96aL, |
| 0x346ed9fcL, 0xad678846L, 0xda60b8d0L, 0x44042d73L, 0x33031de5L, |
| 0xaa0a4c5fL, 0xdd0d7cc9L, 0x5005713cL, 0x270241aaL, 0xbe0b1010L, |
| 0xc90c2086L, 0x5768b525L, 0x206f85b3L, 0xb966d409L, 0xce61e49fL, |
| 0x5edef90eL, 0x29d9c998L, 0xb0d09822L, 0xc7d7a8b4L, 0x59b33d17L, |
| 0x2eb40d81L, 0xb7bd5c3bL, 0xc0ba6cadL, 0xedb88320L, 0x9abfb3b6L, |
| 0x03b6e20cL, 0x74b1d29aL, 0xead54739L, 0x9dd277afL, 0x04db2615L, |
| 0x73dc1683L, 0xe3630b12L, 0x94643b84L, 0x0d6d6a3eL, 0x7a6a5aa8L, |
| 0xe40ecf0bL, 0x9309ff9dL, 0x0a00ae27L, 0x7d079eb1L, 0xf00f9344L, |
| 0x8708a3d2L, 0x1e01f268L, 0x6906c2feL, 0xf762575dL, 0x806567cbL, |
| 0x196c3671L, 0x6e6b06e7L, 0xfed41b76L, 0x89d32be0L, 0x10da7a5aL, |
| 0x67dd4accL, 0xf9b9df6fL, 0x8ebeeff9L, 0x17b7be43L, 0x60b08ed5L, |
| 0xd6d6a3e8L, 0xa1d1937eL, 0x38d8c2c4L, 0x4fdff252L, 0xd1bb67f1L, |
| 0xa6bc5767L, 0x3fb506ddL, 0x48b2364bL, 0xd80d2bdaL, 0xaf0a1b4cL, |
| 0x36034af6L, 0x41047a60L, 0xdf60efc3L, 0xa867df55L, 0x316e8eefL, |
| 0x4669be79L, 0xcb61b38cL, 0xbc66831aL, 0x256fd2a0L, 0x5268e236L, |
| 0xcc0c7795L, 0xbb0b4703L, 0x220216b9L, 0x5505262fL, 0xc5ba3bbeL, |
| 0xb2bd0b28L, 0x2bb45a92L, 0x5cb36a04L, 0xc2d7ffa7L, 0xb5d0cf31L, |
| 0x2cd99e8bL, 0x5bdeae1dL, 0x9b64c2b0L, 0xec63f226L, 0x756aa39cL, |
| 0x026d930aL, 0x9c0906a9L, 0xeb0e363fL, 0x72076785L, 0x05005713L, |
| 0x95bf4a82L, 0xe2b87a14L, 0x7bb12baeL, 0x0cb61b38L, 0x92d28e9bL, |
| 0xe5d5be0dL, 0x7cdcefb7L, 0x0bdbdf21L, 0x86d3d2d4L, 0xf1d4e242L, |
| 0x68ddb3f8L, 0x1fda836eL, 0x81be16cdL, 0xf6b9265bL, 0x6fb077e1L, |
| 0x18b74777L, 0x88085ae6L, 0xff0f6a70L, 0x66063bcaL, 0x11010b5cL, |
| 0x8f659effL, 0xf862ae69L, 0x616bffd3L, 0x166ccf45L, 0xa00ae278L, |
| 0xd70dd2eeL, 0x4e048354L, 0x3903b3c2L, 0xa7672661L, 0xd06016f7L, |
| 0x4969474dL, 0x3e6e77dbL, 0xaed16a4aL, 0xd9d65adcL, 0x40df0b66L, |
| 0x37d83bf0L, 0xa9bcae53L, 0xdebb9ec5L, 0x47b2cf7fL, 0x30b5ffe9L, |
| 0xbdbdf21cL, 0xcabac28aL, 0x53b39330L, 0x24b4a3a6L, 0xbad03605L, |
| 0xcdd70693L, 0x54de5729L, 0x23d967bfL, 0xb3667a2eL, 0xc4614ab8L, |
| 0x5d681b02L, 0x2a6f2b94L, 0xb40bbe37L, 0xc30c8ea1L, 0x5a05df1bL, |
| 0x2d02ef8dL |
| }; |
| |
| static inline UINT32 crc32_add_char(UINT32 crc, UINT8 c) { |
| return crc32_tab[(crc ^ c) & 0xff] ^ (crc >> 8); |
| } |
| |
| /* |
| * This a generic crc32() function, it takes seed as an argument, |
| * and does __not__ xor at the end. Then individual users can do |
| * whatever they need. |
| */ |
| UINT32 crc32(UINT32 seed, const VOID *buf, UINTN len) { |
| const UINT8 *p = buf; |
| UINT32 crc = seed; |
| |
| while (len > 0) { |
| crc = crc32_add_char(crc, *p++); |
| len--; |
| } |
| |
| return crc; |
| } |
| |
| UINT32 crc32_exclude_offset( |
| UINT32 seed, |
| const VOID *buf, |
| UINTN len, |
| UINTN exclude_off, |
| UINTN exclude_len) { |
| |
| const UINT8 *p = buf; |
| UINT32 crc = seed; |
| UINTN i; |
| |
| for (i = 0; i < len; i++) { |
| UINT8 x = *p++; |
| |
| if (i >= exclude_off && i < exclude_off + exclude_len) |
| x = 0; |
| |
| crc = crc32_add_char(crc, x); |
| } |
| |
| return crc; |
| } |