| /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ |
| /* |
| * Compatibility interface for userspace libc header coordination: |
| * |
| * Define compatibility macros that are used to control the inclusion or |
| * exclusion of UAPI structures and definitions in coordination with another |
| * userspace C library. |
| * |
| * This header is intended to solve the problem of UAPI definitions that |
| * conflict with userspace definitions. If a UAPI header has such conflicting |
| * definitions then the solution is as follows: |
| * |
| * * Synchronize the UAPI header and the libc headers so either one can be |
| * used and such that the ABI is preserved. If this is not possible then |
| * no simple compatibility interface exists (you need to write translating |
| * wrappers and rename things) and you can't use this interface. |
| * |
| * Then follow this process: |
| * |
| * (a) Include libc-compat.h in the UAPI header. |
| * e.g. #include <linux/libc-compat.h> |
| * This include must be as early as possible. |
| * |
| * (b) In libc-compat.h add enough code to detect that the comflicting |
| * userspace libc header has been included first. |
| * |
| * (c) If the userspace libc header has been included first define a set of |
| * guard macros of the form __UAPI_DEF_FOO and set their values to 1, else |
| * set their values to 0. |
| * |
| * (d) Back in the UAPI header with the conflicting definitions, guard the |
| * definitions with: |
| * #if __UAPI_DEF_FOO |
| * ... |
| * #endif |
| * |
| * This fixes the situation where the linux headers are included *after* the |
| * libc headers. To fix the problem with the inclusion in the other order the |
| * userspace libc headers must be fixed like this: |
| * |
| * * For all definitions that conflict with kernel definitions wrap those |
| * defines in the following: |
| * #if !__UAPI_DEF_FOO |
| * ... |
| * #endif |
| * |
| * This prevents the redefinition of a construct already defined by the kernel. |
| */ |
| #ifndef _UAPI_LIBC_COMPAT_H |
| #define _UAPI_LIBC_COMPAT_H |
| |
| /* We have included glibc headers... */ |
| #if defined(__GLIBC__) |
| |
| /* Coordinate with glibc net/if.h header. */ |
| #if defined(_NET_IF_H) && defined(__USE_MISC) |
| |
| /* GLIBC headers included first so don't define anything |
| * that would already be defined. */ |
| |
| #define __UAPI_DEF_IF_IFCONF 0 |
| #define __UAPI_DEF_IF_IFMAP 0 |
| #define __UAPI_DEF_IF_IFNAMSIZ 0 |
| #define __UAPI_DEF_IF_IFREQ 0 |
| /* Everything up to IFF_DYNAMIC, matches net/if.h until glibc 2.23 */ |
| #define __UAPI_DEF_IF_NET_DEVICE_FLAGS 0 |
| /* For the future if glibc adds IFF_LOWER_UP, IFF_DORMANT and IFF_ECHO */ |
| #ifndef __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO |
| #define __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO 1 |
| #endif /* __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO */ |
| |
| #else /* _NET_IF_H */ |
| |
| /* Linux headers included first, and we must define everything |
| * we need. The expectation is that glibc will check the |
| * __UAPI_DEF_* defines and adjust appropriately. */ |
| |
| #define __UAPI_DEF_IF_IFCONF 1 |
| #define __UAPI_DEF_IF_IFMAP 1 |
| #define __UAPI_DEF_IF_IFNAMSIZ 1 |
| #define __UAPI_DEF_IF_IFREQ 1 |
| /* Everything up to IFF_DYNAMIC, matches net/if.h until glibc 2.23 */ |
| #define __UAPI_DEF_IF_NET_DEVICE_FLAGS 1 |
| /* For the future if glibc adds IFF_LOWER_UP, IFF_DORMANT and IFF_ECHO */ |
| #define __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO 1 |
| |
| #endif /* _NET_IF_H */ |
| |
| /* Coordinate with glibc netinet/in.h header. */ |
| #if defined(_NETINET_IN_H) |
| |
| /* GLIBC headers included first so don't define anything |
| * that would already be defined. */ |
| #define __UAPI_DEF_IN_ADDR 0 |
| #define __UAPI_DEF_IN_IPPROTO 0 |
| #define __UAPI_DEF_IN_PKTINFO 0 |
| #define __UAPI_DEF_IP_MREQ 0 |
| #define __UAPI_DEF_SOCKADDR_IN 0 |
| #define __UAPI_DEF_IN_CLASS 0 |
| |
| #define __UAPI_DEF_IN6_ADDR 0 |
| /* The exception is the in6_addr macros which must be defined |
| * if the glibc code didn't define them. This guard matches |
| * the guard in glibc/inet/netinet/in.h which defines the |
| * additional in6_addr macros e.g. s6_addr16, and s6_addr32. */ |
| #if defined(__USE_MISC) || defined (__USE_GNU) |
| #define __UAPI_DEF_IN6_ADDR_ALT 0 |
| #else |
| #define __UAPI_DEF_IN6_ADDR_ALT 1 |
| #endif |
| #define __UAPI_DEF_SOCKADDR_IN6 0 |
| #define __UAPI_DEF_IPV6_MREQ 0 |
| #define __UAPI_DEF_IPPROTO_V6 0 |
| #define __UAPI_DEF_IPV6_OPTIONS 0 |
| #define __UAPI_DEF_IN6_PKTINFO 0 |
| #define __UAPI_DEF_IP6_MTUINFO 0 |
| |
| #else |
| |
| /* Linux headers included first, and we must define everything |
| * we need. The expectation is that glibc will check the |
| * __UAPI_DEF_* defines and adjust appropriately. */ |
| #define __UAPI_DEF_IN_ADDR 1 |
| #define __UAPI_DEF_IN_IPPROTO 1 |
| #define __UAPI_DEF_IN_PKTINFO 1 |
| #define __UAPI_DEF_IP_MREQ 1 |
| #define __UAPI_DEF_SOCKADDR_IN 1 |
| #define __UAPI_DEF_IN_CLASS 1 |
| |
| #define __UAPI_DEF_IN6_ADDR 1 |
| /* We unconditionally define the in6_addr macros and glibc must |
| * coordinate. */ |
| #define __UAPI_DEF_IN6_ADDR_ALT 1 |
| #define __UAPI_DEF_SOCKADDR_IN6 1 |
| #define __UAPI_DEF_IPV6_MREQ 1 |
| #define __UAPI_DEF_IPPROTO_V6 1 |
| #define __UAPI_DEF_IPV6_OPTIONS 1 |
| #define __UAPI_DEF_IN6_PKTINFO 1 |
| #define __UAPI_DEF_IP6_MTUINFO 1 |
| |
| #endif /* _NETINET_IN_H */ |
| |
| /* Coordinate with glibc netipx/ipx.h header. */ |
| #if defined(__NETIPX_IPX_H) |
| |
| #define __UAPI_DEF_SOCKADDR_IPX 0 |
| #define __UAPI_DEF_IPX_ROUTE_DEFINITION 0 |
| #define __UAPI_DEF_IPX_INTERFACE_DEFINITION 0 |
| #define __UAPI_DEF_IPX_CONFIG_DATA 0 |
| #define __UAPI_DEF_IPX_ROUTE_DEF 0 |
| |
| #else /* defined(__NETIPX_IPX_H) */ |
| |
| #define __UAPI_DEF_SOCKADDR_IPX 1 |
| #define __UAPI_DEF_IPX_ROUTE_DEFINITION 1 |
| #define __UAPI_DEF_IPX_INTERFACE_DEFINITION 1 |
| #define __UAPI_DEF_IPX_CONFIG_DATA 1 |
| #define __UAPI_DEF_IPX_ROUTE_DEF 1 |
| |
| #endif /* defined(__NETIPX_IPX_H) */ |
| |
| /* Definitions for xattr.h */ |
| #if defined(_SYS_XATTR_H) |
| #define __UAPI_DEF_XATTR 0 |
| #else |
| #define __UAPI_DEF_XATTR 1 |
| #endif |
| |
| /* If we did not see any headers from any supported C libraries, |
| * or we are being included in the kernel, then define everything |
| * that we need. Check for previous __UAPI_* definitions to give |
| * unsupported C libraries a way to opt out of any kernel definition. */ |
| #else /* !defined(__GLIBC__) */ |
| |
| /* Definitions for if.h */ |
| #ifndef __UAPI_DEF_IF_IFCONF |
| #define __UAPI_DEF_IF_IFCONF 1 |
| #endif |
| #ifndef __UAPI_DEF_IF_IFMAP |
| #define __UAPI_DEF_IF_IFMAP 1 |
| #endif |
| #ifndef __UAPI_DEF_IF_IFNAMSIZ |
| #define __UAPI_DEF_IF_IFNAMSIZ 1 |
| #endif |
| #ifndef __UAPI_DEF_IF_IFREQ |
| #define __UAPI_DEF_IF_IFREQ 1 |
| #endif |
| /* Everything up to IFF_DYNAMIC, matches net/if.h until glibc 2.23 */ |
| #ifndef __UAPI_DEF_IF_NET_DEVICE_FLAGS |
| #define __UAPI_DEF_IF_NET_DEVICE_FLAGS 1 |
| #endif |
| /* For the future if glibc adds IFF_LOWER_UP, IFF_DORMANT and IFF_ECHO */ |
| #ifndef __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO |
| #define __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO 1 |
| #endif |
| |
| /* Definitions for in.h */ |
| #ifndef __UAPI_DEF_IN_ADDR |
| #define __UAPI_DEF_IN_ADDR 1 |
| #endif |
| #ifndef __UAPI_DEF_IN_IPPROTO |
| #define __UAPI_DEF_IN_IPPROTO 1 |
| #endif |
| #ifndef __UAPI_DEF_IN_PKTINFO |
| #define __UAPI_DEF_IN_PKTINFO 1 |
| #endif |
| #ifndef __UAPI_DEF_IP_MREQ |
| #define __UAPI_DEF_IP_MREQ 1 |
| #endif |
| #ifndef __UAPI_DEF_SOCKADDR_IN |
| #define __UAPI_DEF_SOCKADDR_IN 1 |
| #endif |
| #ifndef __UAPI_DEF_IN_CLASS |
| #define __UAPI_DEF_IN_CLASS 1 |
| #endif |
| |
| /* Definitions for in6.h */ |
| #ifndef __UAPI_DEF_IN6_ADDR |
| #define __UAPI_DEF_IN6_ADDR 1 |
| #endif |
| #ifndef __UAPI_DEF_IN6_ADDR_ALT |
| #define __UAPI_DEF_IN6_ADDR_ALT 1 |
| #endif |
| #ifndef __UAPI_DEF_SOCKADDR_IN6 |
| #define __UAPI_DEF_SOCKADDR_IN6 1 |
| #endif |
| #ifndef __UAPI_DEF_IPV6_MREQ |
| #define __UAPI_DEF_IPV6_MREQ 1 |
| #endif |
| #ifndef __UAPI_DEF_IPPROTO_V6 |
| #define __UAPI_DEF_IPPROTO_V6 1 |
| #endif |
| #ifndef __UAPI_DEF_IPV6_OPTIONS |
| #define __UAPI_DEF_IPV6_OPTIONS 1 |
| #endif |
| #ifndef __UAPI_DEF_IN6_PKTINFO |
| #define __UAPI_DEF_IN6_PKTINFO 1 |
| #endif |
| #ifndef __UAPI_DEF_IP6_MTUINFO |
| #define __UAPI_DEF_IP6_MTUINFO 1 |
| #endif |
| |
| /* Definitions for ipx.h */ |
| #ifndef __UAPI_DEF_SOCKADDR_IPX |
| #define __UAPI_DEF_SOCKADDR_IPX 1 |
| #endif |
| #ifndef __UAPI_DEF_IPX_ROUTE_DEFINITION |
| #define __UAPI_DEF_IPX_ROUTE_DEFINITION 1 |
| #endif |
| #ifndef __UAPI_DEF_IPX_INTERFACE_DEFINITION |
| #define __UAPI_DEF_IPX_INTERFACE_DEFINITION 1 |
| #endif |
| #ifndef __UAPI_DEF_IPX_CONFIG_DATA |
| #define __UAPI_DEF_IPX_CONFIG_DATA 1 |
| #endif |
| #ifndef __UAPI_DEF_IPX_ROUTE_DEF |
| #define __UAPI_DEF_IPX_ROUTE_DEF 1 |
| #endif |
| |
| /* Definitions for xattr.h */ |
| #ifndef __UAPI_DEF_XATTR |
| #define __UAPI_DEF_XATTR 1 |
| #endif |
| |
| #endif /* __GLIBC__ */ |
| |
| #endif /* _UAPI_LIBC_COMPAT_H */ |