| /* SPDX-License-Identifier: LGPL-2.1+ */ |
| |
| #include "sd-bus.h" |
| |
| #include "alloc-util.h" |
| #include "bpf-firewall.h" |
| #include "bus-common-errors.h" |
| #include "bus-polkit.h" |
| #include "bus-util.h" |
| #include "cgroup-util.h" |
| #include "condition.h" |
| #include "dbus-job.h" |
| #include "dbus-unit.h" |
| #include "dbus-util.h" |
| #include "dbus.h" |
| #include "fd-util.h" |
| #include "install.h" |
| #include "locale-util.h" |
| #include "log.h" |
| #include "path-util.h" |
| #include "process-util.h" |
| #include "selinux-access.h" |
| #include "signal-util.h" |
| #include "special.h" |
| #include "string-table.h" |
| #include "string-util.h" |
| #include "strv.h" |
| #include "user-util.h" |
| #include "web-util.h" |
| |
| static bool unit_can_start_refuse_manual(Unit *u) { |
| return unit_can_start(u) && !u->refuse_manual_start; |
| } |
| |
| static bool unit_can_stop_refuse_manual(Unit *u) { |
| return unit_can_stop(u) && !u->refuse_manual_stop; |
| } |
| |
| static bool unit_can_isolate_refuse_manual(Unit *u) { |
| return unit_can_isolate(u) && !u->refuse_manual_start; |
| } |
| |
| static BUS_DEFINE_PROPERTY_GET_ENUM(property_get_collect_mode, collect_mode, CollectMode); |
| static BUS_DEFINE_PROPERTY_GET_ENUM(property_get_load_state, unit_load_state, UnitLoadState); |
| static BUS_DEFINE_PROPERTY_GET_ENUM(property_get_job_mode, job_mode, JobMode); |
| static BUS_DEFINE_PROPERTY_GET_ENUM(property_get_emergency_action, emergency_action, EmergencyAction); |
| static BUS_DEFINE_PROPERTY_GET(property_get_description, "s", Unit, unit_description); |
| static BUS_DEFINE_PROPERTY_GET2(property_get_active_state, "s", Unit, unit_active_state, unit_active_state_to_string); |
| static BUS_DEFINE_PROPERTY_GET(property_get_sub_state, "s", Unit, unit_sub_state_to_string); |
| static BUS_DEFINE_PROPERTY_GET2(property_get_unit_file_state, "s", Unit, unit_get_unit_file_state, unit_file_state_to_string); |
| static BUS_DEFINE_PROPERTY_GET(property_get_can_reload, "b", Unit, unit_can_reload); |
| static BUS_DEFINE_PROPERTY_GET(property_get_can_start, "b", Unit, unit_can_start_refuse_manual); |
| static BUS_DEFINE_PROPERTY_GET(property_get_can_stop, "b", Unit, unit_can_stop_refuse_manual); |
| static BUS_DEFINE_PROPERTY_GET(property_get_can_isolate, "b", Unit, unit_can_isolate_refuse_manual); |
| static BUS_DEFINE_PROPERTY_GET(property_get_need_daemon_reload, "b", Unit, unit_need_daemon_reload); |
| static BUS_DEFINE_PROPERTY_GET_GLOBAL(property_get_empty_strv, "as", 0); |
| |
| static int property_get_can_clean( |
| sd_bus *bus, |
| const char *path, |
| const char *interface, |
| const char *property, |
| sd_bus_message *reply, |
| void *userdata, |
| sd_bus_error *error) { |
| |
| Unit *u = userdata; |
| ExecCleanMask mask; |
| int r; |
| |
| assert(bus); |
| assert(reply); |
| |
| r = unit_can_clean(u, &mask); |
| if (r < 0) |
| return r; |
| |
| r = sd_bus_message_open_container(reply, 'a', "s"); |
| if (r < 0) |
| return r; |
| |
| for (ExecDirectoryType t = 0; t < _EXEC_DIRECTORY_TYPE_MAX; t++) { |
| if (!FLAGS_SET(mask, 1U << t)) |
| continue; |
| |
| r = sd_bus_message_append(reply, "s", exec_resource_type_to_string(t)); |
| if (r < 0) |
| return r; |
| } |
| |
| return sd_bus_message_close_container(reply); |
| } |
| |
| static int property_get_names( |
| sd_bus *bus, |
| const char *path, |
| const char *interface, |
| const char *property, |
| sd_bus_message *reply, |
| void *userdata, |
| sd_bus_error *error) { |
| |
| Set **s = userdata; |
| Iterator i; |
| const char *t; |
| int r; |
| |
| assert(bus); |
| assert(reply); |
| assert(s); |
| |
| r = sd_bus_message_open_container(reply, 'a', "s"); |
| if (r < 0) |
| return r; |
| |
| SET_FOREACH(t, *s, i) { |
| r = sd_bus_message_append(reply, "s", t); |
| if (r < 0) |
| return r; |
| } |
| |
| return sd_bus_message_close_container(reply); |
| } |
| |
| static int property_get_following( |
| sd_bus *bus, |
| const char *path, |
| const char *interface, |
| const char *property, |
| sd_bus_message *reply, |
| void *userdata, |
| sd_bus_error *error) { |
| |
| Unit *u = userdata, *f; |
| |
| assert(bus); |
| assert(reply); |
| assert(u); |
| |
| f = unit_following(u); |
| return sd_bus_message_append(reply, "s", f ? f->id : NULL); |
| } |
| |
| static int property_get_dependencies( |
| sd_bus *bus, |
| const char *path, |
| const char *interface, |
| const char *property, |
| sd_bus_message *reply, |
| void *userdata, |
| sd_bus_error *error) { |
| |
| Hashmap **h = userdata; |
| Iterator j; |
| Unit *u; |
| void *v; |
| int r; |
| |
| assert(bus); |
| assert(reply); |
| assert(h); |
| |
| r = sd_bus_message_open_container(reply, 'a', "s"); |
| if (r < 0) |
| return r; |
| |
| HASHMAP_FOREACH_KEY(v, u, *h, j) { |
| r = sd_bus_message_append(reply, "s", u->id); |
| if (r < 0) |
| return r; |
| } |
| |
| return sd_bus_message_close_container(reply); |
| } |
| |
| static int property_get_requires_mounts_for( |
| sd_bus *bus, |
| const char *path, |
| const char *interface, |
| const char *property, |
| sd_bus_message *reply, |
| void *userdata, |
| sd_bus_error *error) { |
| |
| Hashmap **h = userdata; |
| const char *p; |
| Iterator j; |
| void *v; |
| int r; |
| |
| assert(bus); |
| assert(reply); |
| assert(h); |
| |
| r = sd_bus_message_open_container(reply, 'a', "s"); |
| if (r < 0) |
| return r; |
| |
| HASHMAP_FOREACH_KEY(v, p, *h, j) { |
| r = sd_bus_message_append(reply, "s", p); |
| if (r < 0) |
| return r; |
| } |
| |
| return sd_bus_message_close_container(reply); |
| } |
| |
| static int property_get_unit_file_preset( |
| sd_bus *bus, |
| const char *path, |
| const char *interface, |
| const char *property, |
| sd_bus_message *reply, |
| void *userdata, |
| sd_bus_error *error) { |
| |
| Unit *u = userdata; |
| int r; |
| |
| assert(bus); |
| assert(reply); |
| assert(u); |
| |
| r = unit_get_unit_file_preset(u); |
| |
| return sd_bus_message_append(reply, "s", |
| r < 0 ? NULL: |
| r > 0 ? "enabled" : "disabled"); |
| } |
| |
| static int property_get_job( |
| sd_bus *bus, |
| const char *path, |
| const char *interface, |
| const char *property, |
| sd_bus_message *reply, |
| void *userdata, |
| sd_bus_error *error) { |
| |
| _cleanup_free_ char *p = NULL; |
| Job **j = userdata; |
| |
| assert(bus); |
| assert(reply); |
| assert(j); |
| |
| if (!*j) |
| return sd_bus_message_append(reply, "(uo)", 0, "/"); |
| |
| p = job_dbus_path(*j); |
| if (!p) |
| return -ENOMEM; |
| |
| return sd_bus_message_append(reply, "(uo)", (*j)->id, p); |
| } |
| |
| static int property_get_conditions( |
| sd_bus *bus, |
| const char *path, |
| const char *interface, |
| const char *property, |
| sd_bus_message *reply, |
| void *userdata, |
| sd_bus_error *error) { |
| |
| const char *(*to_string)(ConditionType type) = NULL; |
| Condition **list = userdata, *c; |
| int r; |
| |
| assert(bus); |
| assert(reply); |
| assert(list); |
| |
| to_string = streq(property, "Asserts") ? assert_type_to_string : condition_type_to_string; |
| |
| r = sd_bus_message_open_container(reply, 'a', "(sbbsi)"); |
| if (r < 0) |
| return r; |
| |
| LIST_FOREACH(conditions, c, *list) { |
| int tristate; |
| |
| tristate = |
| c->result == CONDITION_UNTESTED ? 0 : |
| c->result == CONDITION_SUCCEEDED ? 1 : -1; |
| |
| r = sd_bus_message_append(reply, "(sbbsi)", |
| to_string(c->type), |
| c->trigger, c->negate, |
| c->parameter, tristate); |
| if (r < 0) |
| return r; |
| |
| } |
| |
| return sd_bus_message_close_container(reply); |
| } |
| |
| static int property_get_load_error( |
| sd_bus *bus, |
| const char *path, |
| const char *interface, |
| const char *property, |
| sd_bus_message *reply, |
| void *userdata, |
| sd_bus_error *error) { |
| |
| _cleanup_(sd_bus_error_free) sd_bus_error e = SD_BUS_ERROR_NULL; |
| Unit *u = userdata; |
| int r; |
| |
| assert(bus); |
| assert(reply); |
| assert(u); |
| |
| r = bus_unit_validate_load_state(u, &e); |
| if (r < 0) |
| return sd_bus_message_append(reply, "(ss)", e.name, e.message); |
| |
| return sd_bus_message_append(reply, "(ss)", NULL, NULL); |
| } |
| |
| static int bus_verify_manage_units_async_full( |
| Unit *u, |
| const char *verb, |
| int capability, |
| const char *polkit_message, |
| bool interactive, |
| sd_bus_message *call, |
| sd_bus_error *error) { |
| |
| const char *details[9] = { |
| "unit", u->id, |
| "verb", verb, |
| }; |
| |
| if (polkit_message) { |
| details[4] = "polkit.message"; |
| details[5] = polkit_message; |
| details[6] = "polkit.gettext_domain"; |
| details[7] = GETTEXT_PACKAGE; |
| } |
| |
| return bus_verify_polkit_async( |
| call, |
| capability, |
| "org.freedesktop.systemd1.manage-units", |
| details, |
| interactive, |
| UID_INVALID, |
| &u->manager->polkit_registry, |
| error); |
| } |
| |
| static const char *const polkit_message_for_job[_JOB_TYPE_MAX] = { |
| [JOB_START] = N_("Authentication is required to start '$(unit)'."), |
| [JOB_STOP] = N_("Authentication is required to stop '$(unit)'."), |
| [JOB_RELOAD] = N_("Authentication is required to reload '$(unit)'."), |
| [JOB_RESTART] = N_("Authentication is required to restart '$(unit)'."), |
| [JOB_TRY_RESTART] = N_("Authentication is required to restart '$(unit)'."), |
| }; |
| |
| int bus_unit_method_start_generic( |
| sd_bus_message *message, |
| Unit *u, |
| JobType job_type, |
| bool reload_if_possible, |
| sd_bus_error *error) { |
| |
| const char *smode, *verb; |
| JobMode mode; |
| int r; |
| |
| assert(message); |
| assert(u); |
| assert(job_type >= 0 && job_type < _JOB_TYPE_MAX); |
| |
| r = mac_selinux_unit_access_check( |
| u, message, |
| job_type_to_access_method(job_type), |
| error); |
| if (r < 0) |
| return r; |
| |
| r = sd_bus_message_read(message, "s", &smode); |
| if (r < 0) |
| return r; |
| |
| mode = job_mode_from_string(smode); |
| if (mode < 0) |
| return sd_bus_error_setf(error, SD_BUS_ERROR_INVALID_ARGS, "Job mode %s invalid", smode); |
| |
| if (reload_if_possible) |
| verb = strjoina("reload-or-", job_type_to_string(job_type)); |
| else |
| verb = job_type_to_string(job_type); |
| |
| r = bus_verify_manage_units_async_full( |
| u, |
| verb, |
| CAP_SYS_ADMIN, |
| polkit_message_for_job[job_type], |
| true, |
| message, |
| error); |
| if (r < 0) |
| return r; |
| if (r == 0) |
| return 1; /* No authorization for now, but the async polkit stuff will call us again when it has it */ |
| |
| return bus_unit_queue_job(message, u, job_type, mode, |
| reload_if_possible ? BUS_UNIT_QUEUE_RELOAD_IF_POSSIBLE : 0, error); |
| } |
| |
| static int method_start(sd_bus_message *message, void *userdata, sd_bus_error *error) { |
| return bus_unit_method_start_generic(message, userdata, JOB_START, false, error); |
| } |
| |
| static int method_stop(sd_bus_message *message, void *userdata, sd_bus_error *error) { |
| return bus_unit_method_start_generic(message, userdata, JOB_STOP, false, error); |
| } |
| |
| static int method_reload(sd_bus_message *message, void *userdata, sd_bus_error *error) { |
| return bus_unit_method_start_generic(message, userdata, JOB_RELOAD, false, error); |
| } |
| |
| static int method_restart(sd_bus_message *message, void *userdata, sd_bus_error *error) { |
| return bus_unit_method_start_generic(message, userdata, JOB_RESTART, false, error); |
| } |
| |
| static int method_try_restart(sd_bus_message *message, void *userdata, sd_bus_error *error) { |
| return bus_unit_method_start_generic(message, userdata, JOB_TRY_RESTART, false, error); |
| } |
| |
| static int method_reload_or_restart(sd_bus_message *message, void *userdata, sd_bus_error *error) { |
| return bus_unit_method_start_generic(message, userdata, JOB_RESTART, true, error); |
| } |
| |
| static int method_reload_or_try_restart(sd_bus_message *message, void *userdata, sd_bus_error *error) { |
| return bus_unit_method_start_generic(message, userdata, JOB_TRY_RESTART, true, error); |
| } |
| |
| int bus_unit_method_enqueue_job(sd_bus_message *message, void *userdata, sd_bus_error *error) { |
| BusUnitQueueFlags flags = BUS_UNIT_QUEUE_VERBOSE_REPLY; |
| const char *jtype, *smode; |
| Unit *u = userdata; |
| JobType type; |
| JobMode mode; |
| int r; |
| |
| assert(message); |
| assert(u); |
| |
| r = sd_bus_message_read(message, "ss", &jtype, &smode); |
| if (r < 0) |
| return r; |
| |
| /* Parse the two magic reload types "reload-or-…" manually */ |
| if (streq(jtype, "reload-or-restart")) { |
| type = JOB_RESTART; |
| flags |= BUS_UNIT_QUEUE_RELOAD_IF_POSSIBLE; |
| } else if (streq(jtype, "reload-or-try-restart")) { |
| type = JOB_TRY_RESTART; |
| flags |= BUS_UNIT_QUEUE_RELOAD_IF_POSSIBLE; |
| } else { |
| /* And the rest generically */ |
| type = job_type_from_string(jtype); |
| if (type < 0) |
| return sd_bus_error_setf(error, SD_BUS_ERROR_INVALID_ARGS, "Job type %s invalid", jtype); |
| } |
| |
| mode = job_mode_from_string(smode); |
| if (mode < 0) |
| return sd_bus_error_setf(error, SD_BUS_ERROR_INVALID_ARGS, "Job mode %s invalid", smode); |
| |
| r = mac_selinux_unit_access_check( |
| u, message, |
| job_type_to_access_method(type), |
| error); |
| if (r < 0) |
| return r; |
| |
| r = bus_verify_manage_units_async_full( |
| u, |
| jtype, |
| CAP_SYS_ADMIN, |
| polkit_message_for_job[type], |
| true, |
| message, |
| error); |
| if (r < 0) |
| return r; |
| if (r == 0) |
| return 1; /* No authorization for now, but the async polkit stuff will call us again when it has it */ |
| |
| return bus_unit_queue_job(message, u, type, mode, flags, error); |
| } |
| |
| int bus_unit_method_kill(sd_bus_message *message, void *userdata, sd_bus_error *error) { |
| Unit *u = userdata; |
| const char *swho; |
| int32_t signo; |
| KillWho who; |
| int r; |
| |
| assert(message); |
| assert(u); |
| |
| r = mac_selinux_unit_access_check(u, message, "stop", error); |
| if (r < 0) |
| return r; |
| |
| r = sd_bus_message_read(message, "si", &swho, &signo); |
| if (r < 0) |
| return r; |
| |
| if (isempty(swho)) |
| who = KILL_ALL; |
| else { |
| who = kill_who_from_string(swho); |
| if (who < 0) |
| return sd_bus_error_setf(error, SD_BUS_ERROR_INVALID_ARGS, "Invalid who argument %s", swho); |
| } |
| |
| if (!SIGNAL_VALID(signo)) |
| return sd_bus_error_setf(error, SD_BUS_ERROR_INVALID_ARGS, "Signal number out of range."); |
| |
| r = bus_verify_manage_units_async_full( |
| u, |
| "kill", |
| CAP_KILL, |
| N_("Authentication is required to send a UNIX signal to the processes of '$(unit)'."), |
| true, |
| message, |
| error); |
| if (r < 0) |
| return r; |
| if (r == 0) |
| return 1; /* No authorization for now, but the async polkit stuff will call us again when it has it */ |
| |
| r = unit_kill(u, who, signo, error); |
| if (r < 0) |
| return r; |
| |
| return sd_bus_reply_method_return(message, NULL); |
| } |
| |
| int bus_unit_method_reset_failed(sd_bus_message *message, void *userdata, sd_bus_error *error) { |
| Unit *u = userdata; |
| int r; |
| |
| assert(message); |
| assert(u); |
| |
| r = mac_selinux_unit_access_check(u, message, "reload", error); |
| if (r < 0) |
| return r; |
| |
| r = bus_verify_manage_units_async_full( |
| u, |
| "reset-failed", |
| CAP_SYS_ADMIN, |
| N_("Authentication is required to reset the \"failed\" state of '$(unit)'."), |
| true, |
| message, |
| error); |
| if (r < 0) |
| return r; |
| if (r == 0) |
| return 1; /* No authorization for now, but the async polkit stuff will call us again when it has it */ |
| |
| unit_reset_failed(u); |
| |
| return sd_bus_reply_method_return(message, NULL); |
| } |
| |
| int bus_unit_method_set_properties(sd_bus_message *message, void *userdata, sd_bus_error *error) { |
| Unit *u = userdata; |
| int runtime, r; |
| |
| assert(message); |
| assert(u); |
| |
| r = mac_selinux_unit_access_check(u, message, "start", error); |
| if (r < 0) |
| return r; |
| |
| r = sd_bus_message_read(message, "b", &runtime); |
| if (r < 0) |
| return r; |
| |
| r = bus_verify_manage_units_async_full( |
| u, |
| "set-property", |
| CAP_SYS_ADMIN, |
| N_("Authentication is required to set properties on '$(unit)'."), |
| true, |
| message, |
| error); |
| if (r < 0) |
| return r; |
| if (r == 0) |
| return 1; /* No authorization for now, but the async polkit stuff will call us again when it has it */ |
| |
| r = bus_unit_set_properties(u, message, runtime ? UNIT_RUNTIME : UNIT_PERSISTENT, true, error); |
| if (r < 0) |
| return r; |
| |
| return sd_bus_reply_method_return(message, NULL); |
| } |
| |
| int bus_unit_method_ref(sd_bus_message *message, void *userdata, sd_bus_error *error) { |
| Unit *u = userdata; |
| int r; |
| |
| assert(message); |
| assert(u); |
| |
| r = mac_selinux_unit_access_check(u, message, "start", error); |
| if (r < 0) |
| return r; |
| |
| r = bus_verify_manage_units_async_full( |
| u, |
| "ref", |
| CAP_SYS_ADMIN, |
| NULL, |
| false, |
| message, |
| error); |
| if (r < 0) |
| return r; |
| if (r == 0) |
| return 1; /* No authorization for now, but the async polkit stuff will call us again when it has it */ |
| |
| r = bus_unit_track_add_sender(u, message); |
| if (r < 0) |
| return r; |
| |
| return sd_bus_reply_method_return(message, NULL); |
| } |
| |
| int bus_unit_method_unref(sd_bus_message *message, void *userdata, sd_bus_error *error) { |
| Unit *u = userdata; |
| int r; |
| |
| assert(message); |
| assert(u); |
| |
| r = bus_unit_track_remove_sender(u, message); |
| if (r == -EUNATCH) |
| return sd_bus_error_setf(error, BUS_ERROR_NOT_REFERENCED, "Unit has not been referenced yet."); |
| if (r < 0) |
| return r; |
| |
| return sd_bus_reply_method_return(message, NULL); |
| } |
| |
| int bus_unit_method_clean(sd_bus_message *message, void *userdata, sd_bus_error *error) { |
| ExecCleanMask mask = 0; |
| Unit *u = userdata; |
| int r; |
| |
| assert(message); |
| assert(u); |
| |
| r = mac_selinux_unit_access_check(u, message, "stop", error); |
| if (r < 0) |
| return r; |
| |
| r = sd_bus_message_enter_container(message, 'a', "s"); |
| if (r < 0) |
| return r; |
| |
| for (;;) { |
| const char *i; |
| |
| r = sd_bus_message_read(message, "s", &i); |
| if (r < 0) |
| return r; |
| if (r == 0) |
| break; |
| |
| if (streq(i, "all")) |
| mask |= EXEC_CLEAN_ALL; |
| else { |
| ExecDirectoryType t; |
| |
| t = exec_resource_type_from_string(i); |
| if (t < 0) |
| return sd_bus_error_setf(error, SD_BUS_ERROR_INVALID_ARGS, "Invalid resource type: %s", i); |
| |
| mask |= 1U << t; |
| } |
| } |
| |
| r = sd_bus_message_exit_container(message); |
| if (r < 0) |
| return r; |
| |
| r = bus_verify_manage_units_async_full( |
| u, |
| "clean", |
| CAP_DAC_OVERRIDE, |
| N_("Authentication is required to delete files and directories associated with '$(unit)'."), |
| true, |
| message, |
| error); |
| if (r < 0) |
| return r; |
| if (r == 0) |
| return 1; /* No authorization for now, but the async polkit stuff will call us again when it has it */ |
| |
| r = unit_clean(u, mask); |
| if (r == -EOPNOTSUPP) |
| return sd_bus_error_setf(error, SD_BUS_ERROR_NOT_SUPPORTED, "Unit '%s' does not supporting cleaning.", u->id); |
| if (r == -EUNATCH) |
| return sd_bus_error_setf(error, BUS_ERROR_NOTHING_TO_CLEAN, "No matching resources found."); |
| if (r == -EBUSY) |
| return sd_bus_error_setf(error, BUS_ERROR_UNIT_BUSY, "Unit is not inactive or has pending job."); |
| if (r < 0) |
| return r; |
| |
| return sd_bus_reply_method_return(message, NULL); |
| } |
| |
| static int property_get_refs( |
| sd_bus *bus, |
| const char *path, |
| const char *interface, |
| const char *property, |
| sd_bus_message *reply, |
| void *userdata, |
| sd_bus_error *error) { |
| |
| Unit *u = userdata; |
| const char *i; |
| int r; |
| |
| assert(bus); |
| assert(reply); |
| |
| r = sd_bus_message_open_container(reply, 'a', "s"); |
| if (r < 0) |
| return r; |
| |
| for (i = sd_bus_track_first(u->bus_track); i; i = sd_bus_track_next(u->bus_track)) { |
| int c, k; |
| |
| c = sd_bus_track_count_name(u->bus_track, i); |
| if (c < 0) |
| return c; |
| |
| /* Add the item multiple times if the ref count for each is above 1 */ |
| for (k = 0; k < c; k++) { |
| r = sd_bus_message_append(reply, "s", i); |
| if (r < 0) |
| return r; |
| } |
| } |
| |
| return sd_bus_message_close_container(reply); |
| } |
| |
| const sd_bus_vtable bus_unit_vtable[] = { |
| SD_BUS_VTABLE_START(0), |
| |
| SD_BUS_PROPERTY("Id", "s", NULL, offsetof(Unit, id), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("Names", "as", property_get_names, offsetof(Unit, names), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("Following", "s", property_get_following, 0, 0), |
| SD_BUS_PROPERTY("Requires", "as", property_get_dependencies, offsetof(Unit, dependencies[UNIT_REQUIRES]), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("Requisite", "as", property_get_dependencies, offsetof(Unit, dependencies[UNIT_REQUISITE]), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("Wants", "as", property_get_dependencies, offsetof(Unit, dependencies[UNIT_WANTS]), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("BindsTo", "as", property_get_dependencies, offsetof(Unit, dependencies[UNIT_BINDS_TO]), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("PartOf", "as", property_get_dependencies, offsetof(Unit, dependencies[UNIT_PART_OF]), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("RequiredBy", "as", property_get_dependencies, offsetof(Unit, dependencies[UNIT_REQUIRED_BY]), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("RequisiteOf", "as", property_get_dependencies, offsetof(Unit, dependencies[UNIT_REQUISITE_OF]), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("WantedBy", "as", property_get_dependencies, offsetof(Unit, dependencies[UNIT_WANTED_BY]), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("BoundBy", "as", property_get_dependencies, offsetof(Unit, dependencies[UNIT_BOUND_BY]), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("ConsistsOf", "as", property_get_dependencies, offsetof(Unit, dependencies[UNIT_CONSISTS_OF]), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("Conflicts", "as", property_get_dependencies, offsetof(Unit, dependencies[UNIT_CONFLICTS]), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("ConflictedBy", "as", property_get_dependencies, offsetof(Unit, dependencies[UNIT_CONFLICTED_BY]), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("Before", "as", property_get_dependencies, offsetof(Unit, dependencies[UNIT_BEFORE]), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("After", "as", property_get_dependencies, offsetof(Unit, dependencies[UNIT_AFTER]), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("OnFailure", "as", property_get_dependencies, offsetof(Unit, dependencies[UNIT_ON_FAILURE]), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("Triggers", "as", property_get_dependencies, offsetof(Unit, dependencies[UNIT_TRIGGERS]), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("TriggeredBy", "as", property_get_dependencies, offsetof(Unit, dependencies[UNIT_TRIGGERED_BY]), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("PropagatesReloadTo", "as", property_get_dependencies, offsetof(Unit, dependencies[UNIT_PROPAGATES_RELOAD_TO]), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("ReloadPropagatedFrom", "as", property_get_dependencies, offsetof(Unit, dependencies[UNIT_RELOAD_PROPAGATED_FROM]), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("JoinsNamespaceOf", "as", property_get_dependencies, offsetof(Unit, dependencies[UNIT_JOINS_NAMESPACE_OF]), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("RequiresMountsFor", "as", property_get_requires_mounts_for, offsetof(Unit, requires_mounts_for), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("Documentation", "as", NULL, offsetof(Unit, documentation), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("Description", "s", property_get_description, 0, SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("LoadState", "s", property_get_load_state, offsetof(Unit, load_state), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("ActiveState", "s", property_get_active_state, 0, SD_BUS_VTABLE_PROPERTY_EMITS_CHANGE), |
| SD_BUS_PROPERTY("SubState", "s", property_get_sub_state, 0, SD_BUS_VTABLE_PROPERTY_EMITS_CHANGE), |
| SD_BUS_PROPERTY("FragmentPath", "s", NULL, offsetof(Unit, fragment_path), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("SourcePath", "s", NULL, offsetof(Unit, source_path), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("DropInPaths", "as", NULL, offsetof(Unit, dropin_paths), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("UnitFileState", "s", property_get_unit_file_state, 0, 0), |
| SD_BUS_PROPERTY("UnitFilePreset", "s", property_get_unit_file_preset, 0, 0), |
| BUS_PROPERTY_DUAL_TIMESTAMP("StateChangeTimestamp", offsetof(Unit, state_change_timestamp), SD_BUS_VTABLE_PROPERTY_EMITS_CHANGE), |
| BUS_PROPERTY_DUAL_TIMESTAMP("InactiveExitTimestamp", offsetof(Unit, inactive_exit_timestamp), SD_BUS_VTABLE_PROPERTY_EMITS_CHANGE), |
| BUS_PROPERTY_DUAL_TIMESTAMP("ActiveEnterTimestamp", offsetof(Unit, active_enter_timestamp), SD_BUS_VTABLE_PROPERTY_EMITS_CHANGE), |
| BUS_PROPERTY_DUAL_TIMESTAMP("ActiveExitTimestamp", offsetof(Unit, active_exit_timestamp), SD_BUS_VTABLE_PROPERTY_EMITS_CHANGE), |
| BUS_PROPERTY_DUAL_TIMESTAMP("InactiveEnterTimestamp", offsetof(Unit, inactive_enter_timestamp), SD_BUS_VTABLE_PROPERTY_EMITS_CHANGE), |
| SD_BUS_PROPERTY("CanStart", "b", property_get_can_start, 0, SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("CanStop", "b", property_get_can_stop, 0, SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("CanReload", "b", property_get_can_reload, 0, SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("CanIsolate", "b", property_get_can_isolate, 0, SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("CanClean", "as", property_get_can_clean, 0, SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("Job", "(uo)", property_get_job, offsetof(Unit, job), SD_BUS_VTABLE_PROPERTY_EMITS_CHANGE), |
| SD_BUS_PROPERTY("StopWhenUnneeded", "b", bus_property_get_bool, offsetof(Unit, stop_when_unneeded), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("RefuseManualStart", "b", bus_property_get_bool, offsetof(Unit, refuse_manual_start), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("RefuseManualStop", "b", bus_property_get_bool, offsetof(Unit, refuse_manual_stop), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("AllowIsolate", "b", bus_property_get_bool, offsetof(Unit, allow_isolate), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("DefaultDependencies", "b", bus_property_get_bool, offsetof(Unit, default_dependencies), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("OnFailureJobMode", "s", property_get_job_mode, offsetof(Unit, on_failure_job_mode), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("IgnoreOnIsolate", "b", bus_property_get_bool, offsetof(Unit, ignore_on_isolate), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("NeedDaemonReload", "b", property_get_need_daemon_reload, 0, SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("JobTimeoutUSec", "t", bus_property_get_usec, offsetof(Unit, job_timeout), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("JobRunningTimeoutUSec", "t", bus_property_get_usec, offsetof(Unit, job_running_timeout), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("JobTimeoutAction", "s", property_get_emergency_action, offsetof(Unit, job_timeout_action), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("JobTimeoutRebootArgument", "s", NULL, offsetof(Unit, job_timeout_reboot_arg), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("ConditionResult", "b", bus_property_get_bool, offsetof(Unit, condition_result), SD_BUS_VTABLE_PROPERTY_EMITS_CHANGE), |
| SD_BUS_PROPERTY("AssertResult", "b", bus_property_get_bool, offsetof(Unit, assert_result), SD_BUS_VTABLE_PROPERTY_EMITS_CHANGE), |
| BUS_PROPERTY_DUAL_TIMESTAMP("ConditionTimestamp", offsetof(Unit, condition_timestamp), SD_BUS_VTABLE_PROPERTY_EMITS_CHANGE), |
| BUS_PROPERTY_DUAL_TIMESTAMP("AssertTimestamp", offsetof(Unit, assert_timestamp), SD_BUS_VTABLE_PROPERTY_EMITS_CHANGE), |
| SD_BUS_PROPERTY("Conditions", "a(sbbsi)", property_get_conditions, offsetof(Unit, conditions), SD_BUS_VTABLE_PROPERTY_EMITS_INVALIDATION), |
| SD_BUS_PROPERTY("Asserts", "a(sbbsi)", property_get_conditions, offsetof(Unit, asserts), SD_BUS_VTABLE_PROPERTY_EMITS_INVALIDATION), |
| SD_BUS_PROPERTY("LoadError", "(ss)", property_get_load_error, 0, SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("Transient", "b", bus_property_get_bool, offsetof(Unit, transient), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("Perpetual", "b", bus_property_get_bool, offsetof(Unit, perpetual), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("StartLimitIntervalUSec", "t", bus_property_get_usec, offsetof(Unit, start_ratelimit.interval), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("StartLimitBurst", "u", bus_property_get_unsigned, offsetof(Unit, start_ratelimit.burst), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("StartLimitAction", "s", property_get_emergency_action, offsetof(Unit, start_limit_action), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("FailureAction", "s", property_get_emergency_action, offsetof(Unit, failure_action), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("FailureActionExitStatus", "i", bus_property_get_int, offsetof(Unit, failure_action_exit_status), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("SuccessAction", "s", property_get_emergency_action, offsetof(Unit, success_action), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("SuccessActionExitStatus", "i", bus_property_get_int, offsetof(Unit, success_action_exit_status), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("RebootArgument", "s", NULL, offsetof(Unit, reboot_arg), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("InvocationID", "ay", bus_property_get_id128, offsetof(Unit, invocation_id), SD_BUS_VTABLE_PROPERTY_EMITS_CHANGE), |
| SD_BUS_PROPERTY("CollectMode", "s", property_get_collect_mode, offsetof(Unit, collect_mode), SD_BUS_VTABLE_PROPERTY_CONST), |
| SD_BUS_PROPERTY("Refs", "as", property_get_refs, 0, 0), |
| |
| SD_BUS_METHOD("Start", "s", "o", method_start, SD_BUS_VTABLE_UNPRIVILEGED), |
| SD_BUS_METHOD("Stop", "s", "o", method_stop, SD_BUS_VTABLE_UNPRIVILEGED), |
| SD_BUS_METHOD("Reload", "s", "o", method_reload, SD_BUS_VTABLE_UNPRIVILEGED), |
| SD_BUS_METHOD("Restart", "s", "o", method_restart, SD_BUS_VTABLE_UNPRIVILEGED), |
| SD_BUS_METHOD("TryRestart", "s", "o", method_try_restart, SD_BUS_VTABLE_UNPRIVILEGED), |
| SD_BUS_METHOD("ReloadOrRestart", "s", "o", method_reload_or_restart, SD_BUS_VTABLE_UNPRIVILEGED), |
| SD_BUS_METHOD("ReloadOrTryRestart", "s", "o", method_reload_or_try_restart, SD_BUS_VTABLE_UNPRIVILEGED), |
| SD_BUS_METHOD("EnqueueJob", "ss", "uososa(uosos)", bus_unit_method_enqueue_job, SD_BUS_VTABLE_UNPRIVILEGED), |
| SD_BUS_METHOD("Kill", "si", NULL, bus_unit_method_kill, SD_BUS_VTABLE_UNPRIVILEGED), |
| SD_BUS_METHOD("ResetFailed", NULL, NULL, bus_unit_method_reset_failed, SD_BUS_VTABLE_UNPRIVILEGED), |
| SD_BUS_METHOD("SetProperties", "ba(sv)", NULL, bus_unit_method_set_properties, SD_BUS_VTABLE_UNPRIVILEGED), |
| SD_BUS_METHOD("Ref", NULL, NULL, bus_unit_method_ref, SD_BUS_VTABLE_UNPRIVILEGED), |
| SD_BUS_METHOD("Unref", NULL, NULL, bus_unit_method_unref, SD_BUS_VTABLE_UNPRIVILEGED), |
| SD_BUS_METHOD("Clean", "as", NULL, bus_unit_method_clean, SD_BUS_VTABLE_UNPRIVILEGED), |
| |
| /* For dependency types we don't support anymore always return an empty array */ |
| SD_BUS_PROPERTY("RequiresOverridable", "as", property_get_empty_strv, 0, SD_BUS_VTABLE_HIDDEN), |
| SD_BUS_PROPERTY("RequisiteOverridable", "as", property_get_empty_strv, 0, SD_BUS_VTABLE_HIDDEN), |
| SD_BUS_PROPERTY("RequiredByOverridable", "as", property_get_empty_strv, 0, SD_BUS_VTABLE_HIDDEN), |
| SD_BUS_PROPERTY("RequisiteOfOverridable", "as", property_get_empty_strv, 0, SD_BUS_VTABLE_HIDDEN), |
| /* Obsolete alias names */ |
| SD_BUS_PROPERTY("StartLimitInterval", "t", bus_property_get_usec, offsetof(Unit, start_ratelimit.interval), SD_BUS_VTABLE_PROPERTY_CONST|SD_BUS_VTABLE_HIDDEN), |
| SD_BUS_PROPERTY("StartLimitIntervalSec", "t", bus_property_get_usec, offsetof(Unit, start_ratelimit.interval), SD_BUS_VTABLE_PROPERTY_CONST|SD_BUS_VTABLE_HIDDEN), |
| SD_BUS_VTABLE_END |
| }; |
| |
| static int property_get_slice( |
| sd_bus *bus, |
| const char *path, |
| const char *interface, |
| const char *property, |
| sd_bus_message *reply, |
| void *userdata, |
| sd_bus_error *error) { |
| |
| Unit *u = userdata; |
| |
| assert(bus); |
| assert(reply); |
| assert(u); |
| |
| return sd_bus_message_append(reply, "s", unit_slice_name(u)); |
| } |
| |
| static int property_get_current_memory( |
| sd_bus *bus, |
| const char *path, |
| const char *interface, |
| const char *property, |
| sd_bus_message *reply, |
| void *userdata, |
| sd_bus_error *error) { |
| |
| uint64_t sz = (uint64_t) -1; |
| Unit *u = userdata; |
| int r; |
| |
| assert(bus); |
| assert(reply); |
| assert(u); |
| |
| r = unit_get_memory_current(u, &sz); |
| if (r < 0 && r != -ENODATA) |
| log_unit_warning_errno(u, r, "Failed to get memory.usage_in_bytes attribute: %m"); |
| |
| return sd_bus_message_append(reply, "t", sz); |
| } |
| |
| static int property_get_current_tasks( |
| sd_bus *bus, |
| const char *path, |
| const char *interface, |
| const char *property, |
| sd_bus_message *reply, |
| void *userdata, |
| sd_bus_error *error) { |
| |
| uint64_t cn = (uint64_t) -1; |
| Unit *u = userdata; |
| int r; |
| |
| assert(bus); |
| assert(reply); |
| assert(u); |
| |
| r = unit_get_tasks_current(u, &cn); |
| if (r < 0 && r != -ENODATA) |
| log_unit_warning_errno(u, r, "Failed to get pids.current attribute: %m"); |
| |
| return sd_bus_message_append(reply, "t", cn); |
| } |
| |
| static int property_get_cpu_usage( |
| sd_bus *bus, |
| const char *path, |
| const char *interface, |
| const char *property, |
| sd_bus_message *reply, |
| void *userdata, |
| sd_bus_error *error) { |
| |
| nsec_t ns = (nsec_t) -1; |
| Unit *u = userdata; |
| int r; |
| |
| assert(bus); |
| assert(reply); |
| assert(u); |
| |
| r = unit_get_cpu_usage(u, &ns); |
| if (r < 0 && r != -ENODATA) |
| log_unit_warning_errno(u, r, "Failed to get cpuacct.usage attribute: %m"); |
| |
| return sd_bus_message_append(reply, "t", ns); |
| } |
| |
| static int property_get_cpuset_cpus( |
| sd_bus *bus, |
| const char *path, |
| const char *interface, |
| const char *property, |
| sd_bus_message *reply, |
| void *userdata, |
| sd_bus_error *error) { |
| |
| Unit *u = userdata; |
| _cleanup_(cpu_set_reset) CPUSet cpus = {}; |
| _cleanup_free_ uint8_t *array = NULL; |
| size_t allocated; |
| |
| assert(bus); |
| assert(reply); |
| assert(u); |
| |
| (void) unit_get_cpuset(u, &cpus, "cpuset.cpus.effective"); |
| (void) cpu_set_to_dbus(&cpus, &array, &allocated); |
| return sd_bus_message_append_array(reply, 'y', array, allocated); |
| } |
| |
| static int property_get_cpuset_mems( |
| sd_bus *bus, |
| const char *path, |
| const char *interface, |
| const char *property, |
| sd_bus_message *reply, |
| void *userdata, |
| sd_bus_error *error) { |
| |
| Unit *u = userdata; |
| _cleanup_(cpu_set_reset) CPUSet mems = {}; |
| _cleanup_free_ uint8_t *array = NULL; |
| size_t allocated; |
| |
| assert(bus); |
| assert(reply); |
| assert(u); |
| |
| (void) unit_get_cpuset(u, &mems, "cpuset.mems.effective"); |
| (void) cpu_set_to_dbus(&mems, &array, &allocated); |
| return sd_bus_message_append_array(reply, 'y', array, allocated); |
| } |
| |
| static int property_get_cgroup( |
| sd_bus *bus, |
| const char *path, |
| const char *interface, |
| const char *property, |
| sd_bus_message *reply, |
| void *userdata, |
| sd_bus_error *error) { |
| |
| Unit *u = userdata; |
| const char *t = NULL; |
| |
| assert(bus); |
| assert(reply); |
| assert(u); |
| |
| /* Three cases: a) u->cgroup_path is NULL, in which case the |
| * unit has no control group, which we report as the empty |
| * string. b) u->cgroup_path is the empty string, which |
| * indicates the root cgroup, which we report as "/". c) all |
| * other cases we report as-is. */ |
| |
| if (u->cgroup_path) |
| t = empty_to_root(u->cgroup_path); |
| |
| return sd_bus_message_append(reply, "s", t); |
| } |
| |
| static int append_process(sd_bus_message *reply, const char *p, pid_t pid, Set *pids) { |
| _cleanup_free_ char *buf = NULL, *cmdline = NULL; |
| int r; |
| |
| assert(reply); |
| assert(pid > 0); |
| |
| r = set_put(pids, PID_TO_PTR(pid)); |
| if (IN_SET(r, 0, -EEXIST)) |
| return 0; |
| if (r < 0) |
| return r; |
| |
| if (!p) { |
| r = cg_pid_get_path(SYSTEMD_CGROUP_CONTROLLER, pid, &buf); |
| if (r == -ESRCH) |
| return 0; |
| if (r < 0) |
| return r; |
| |
| p = buf; |
| } |
| |
| (void) get_process_cmdline(pid, SIZE_MAX, PROCESS_CMDLINE_COMM_FALLBACK, &cmdline); |
| |
| return sd_bus_message_append(reply, |
| "(sus)", |
| p, |
| (uint32_t) pid, |
| cmdline); |
| } |
| |
| static int append_cgroup(sd_bus_message *reply, const char *p, Set *pids) { |
| _cleanup_closedir_ DIR *d = NULL; |
| _cleanup_fclose_ FILE *f = NULL; |
| int r; |
| |
| assert(reply); |
| assert(p); |
| |
| r = cg_enumerate_processes(SYSTEMD_CGROUP_CONTROLLER, p, &f); |
| if (r == -ENOENT) |
| return 0; |
| if (r < 0) |
| return r; |
| |
| for (;;) { |
| pid_t pid; |
| |
| r = cg_read_pid(f, &pid); |
| if (r < 0) |
| return r; |
| if (r == 0) |
| break; |
| |
| if (is_kernel_thread(pid) > 0) |
| continue; |
| |
| r = append_process(reply, p, pid, pids); |
| if (r < 0) |
| return r; |
| } |
| |
| r = cg_enumerate_subgroups(SYSTEMD_CGROUP_CONTROLLER, p, &d); |
| if (r == -ENOENT) |
| return 0; |
| if (r < 0) |
| return r; |
| |
| for (;;) { |
| _cleanup_free_ char *g = NULL, *j = NULL; |
| |
| r = cg_read_subgroup(d, &g); |
| if (r < 0) |
| return r; |
| if (r == 0) |
| break; |
| |
| j = path_join(empty_to_root(p), g); |
| if (!j) |
| return -ENOMEM; |
| |
| r = append_cgroup(reply, j, pids); |
| if (r < 0) |
| return r; |
| } |
| |
| return 0; |
| } |
| |
| int bus_unit_method_get_processes(sd_bus_message *message, void *userdata, sd_bus_error *error) { |
| _cleanup_(sd_bus_message_unrefp) sd_bus_message *reply = NULL; |
| _cleanup_set_free_ Set *pids = NULL; |
| Unit *u = userdata; |
| pid_t pid; |
| int r; |
| |
| assert(message); |
| |
| r = mac_selinux_unit_access_check(u, message, "status", error); |
| if (r < 0) |
| return r; |
| |
| pids = set_new(NULL); |
| if (!pids) |
| return -ENOMEM; |
| |
| r = sd_bus_message_new_method_return(message, &reply); |
| if (r < 0) |
| return r; |
| |
| r = sd_bus_message_open_container(reply, 'a', "(sus)"); |
| if (r < 0) |
| return r; |
| |
| if (u->cgroup_path) { |
| r = append_cgroup(reply, u->cgroup_path, pids); |
| if (r < 0) |
| return r; |
| } |
| |
| /* The main and control pids might live outside of the cgroup, hence fetch them separately */ |
| pid = unit_main_pid(u); |
| if (pid > 0) { |
| r = append_process(reply, NULL, pid, pids); |
| if (r < 0) |
| return r; |
| } |
| |
| pid = unit_control_pid(u); |
| if (pid > 0) { |
| r = append_process(reply, NULL, pid, pids); |
| if (r < 0) |
| return r; |
| } |
| |
| r = sd_bus_message_close_container(reply); |
| if (r < 0) |
| return r; |
| |
| return sd_bus_send(NULL, reply, NULL); |
| } |
| |
| static int property_get_ip_counter( |
| sd_bus *bus, |
| const char *path, |
| const char *interface, |
| const char *property, |
| sd_bus_message *reply, |
| void *userdata, |
| sd_bus_error *error) { |
| |
| static const char *const table[_CGROUP_IP_ACCOUNTING_METRIC_MAX] = { |
| [CGROUP_IP_INGRESS_BYTES] = "IPIngressBytes", |
| [CGROUP_IP_EGRESS_BYTES] = "IPEgressBytes", |
| [CGROUP_IP_INGRESS_PACKETS] = "IPIngressPackets", |
| [CGROUP_IP_EGRESS_PACKETS] = "IPEgressPackets", |
| }; |
| |
| uint64_t value = UINT64_MAX; |
| Unit *u = userdata; |
| ssize_t metric; |
| |
| assert(bus); |
| assert(reply); |
| assert(property); |
| assert(u); |
| |
| assert_se((metric = string_table_lookup(table, ELEMENTSOF(table), property)) >= 0); |
| (void) unit_get_ip_accounting(u, metric, &value); |
| return sd_bus_message_append(reply, "t", value); |
| } |
| |
| static int property_get_io_counter( |
| sd_bus *bus, |
| const char *path, |
| const char *interface, |
| const char *property, |
| sd_bus_message *reply, |
| void *userdata, |
| sd_bus_error *error) { |
| |
| static const char *const table[_CGROUP_IO_ACCOUNTING_METRIC_MAX] = { |
| [CGROUP_IO_READ_BYTES] = "IOReadBytes", |
| [CGROUP_IO_WRITE_BYTES] = "IOWriteBytes", |
| [CGROUP_IO_READ_OPERATIONS] = "IOReadOperations", |
| [CGROUP_IO_WRITE_OPERATIONS] = "IOWriteOperations", |
| }; |
| |
| uint64_t value = UINT64_MAX; |
| Unit *u = userdata; |
| ssize_t metric; |
| |
| assert(bus); |
| assert(reply); |
| assert(property); |
| assert(u); |
| |
| assert_se((metric = string_table_lookup(table, ELEMENTSOF(table), property)) >= 0); |
| (void) unit_get_io_accounting(u, metric, false, &value); |
| return sd_bus_message_append(reply, "t", value); |
| } |
| |
| int bus_unit_method_attach_processes(sd_bus_message *message, void *userdata, sd_bus_error *error) { |
| |
| _cleanup_(sd_bus_creds_unrefp) sd_bus_creds *creds = NULL; |
| _cleanup_set_free_ Set *pids = NULL; |
| Unit *u = userdata; |
| const char *path; |
| int r; |
| |
| assert(message); |
| |
| /* This migrates the processes with the specified PIDs into the cgroup of this unit, optionally below a |
| * specified cgroup path. Obviously this only works for units that actually maintain a cgroup |
| * representation. If a process is already in the cgroup no operation is executed – in this case the specified |
| * subcgroup path has no effect! */ |
| |
| r = mac_selinux_unit_access_check(u, message, "start", error); |
| if (r < 0) |
| return r; |
| |
| r = sd_bus_message_read(message, "s", &path); |
| if (r < 0) |
| return r; |
| |
| path = empty_to_null(path); |
| if (path) { |
| if (!path_is_absolute(path)) |
| return sd_bus_error_setf(error, SD_BUS_ERROR_INVALID_ARGS, "Control group path is not absolute: %s", path); |
| |
| if (!path_is_normalized(path)) |
| return sd_bus_error_setf(error, SD_BUS_ERROR_INVALID_ARGS, "Control group path is not normalized: %s", path); |
| } |
| |
| if (!unit_cgroup_delegate(u)) |
| return sd_bus_error_setf(error, SD_BUS_ERROR_INVALID_ARGS, "Process migration not available on non-delegated units."); |
| |
| if (UNIT_IS_INACTIVE_OR_FAILED(unit_active_state(u))) |
| return sd_bus_error_setf(error, SD_BUS_ERROR_INVALID_ARGS, "Unit is not active, refusing."); |
| |
| r = sd_bus_query_sender_creds(message, SD_BUS_CREDS_EUID|SD_BUS_CREDS_PID, &creds); |
| if (r < 0) |
| return r; |
| |
| r = sd_bus_message_enter_container(message, 'a', "u"); |
| if (r < 0) |
| return r; |
| for (;;) { |
| uid_t process_uid, sender_uid; |
| uint32_t upid; |
| pid_t pid; |
| |
| r = sd_bus_message_read(message, "u", &upid); |
| if (r < 0) |
| return r; |
| if (r == 0) |
| break; |
| |
| if (upid == 0) { |
| r = sd_bus_creds_get_pid(creds, &pid); |
| if (r < 0) |
| return r; |
| } else |
| pid = (uid_t) upid; |
| |
| /* Filter out duplicates */ |
| if (set_contains(pids, PID_TO_PTR(pid))) |
| continue; |
| |
| /* Check if this process is suitable for attaching to this unit */ |
| r = unit_pid_attachable(u, pid, error); |
| if (r < 0) |
| return r; |
| |
| /* Let's query the sender's UID, so that we can make our security decisions */ |
| r = sd_bus_creds_get_euid(creds, &sender_uid); |
| if (r < 0) |
| return r; |
| |
| /* Let's validate security: if the sender is root, then all is OK. If the sender is any other unit, |
| * then the process' UID and the target unit's UID have to match the sender's UID */ |
| if (sender_uid != 0 && sender_uid != getuid()) { |
| r = get_process_uid(pid, &process_uid); |
| if (r < 0) |
| return sd_bus_error_set_errnof(error, r, "Failed to retrieve process UID: %m"); |
| |
| if (process_uid != sender_uid) |
| return sd_bus_error_setf(error, SD_BUS_ERROR_ACCESS_DENIED, "Process " PID_FMT " not owned by client's UID. Refusing.", pid); |
| if (process_uid != u->ref_uid) |
| return sd_bus_error_setf(error, SD_BUS_ERROR_ACCESS_DENIED, "Process " PID_FMT " not owned by target unit's UID. Refusing.", pid); |
| } |
| |
| if (!pids) { |
| pids = set_new(NULL); |
| if (!pids) |
| return -ENOMEM; |
| } |
| |
| r = set_put(pids, PID_TO_PTR(pid)); |
| if (r < 0) |
| return r; |
| } |
| |
| r = sd_bus_message_exit_container(message); |
| if (r < 0) |
| return r; |
| |
| r = unit_attach_pids_to_cgroup(u, pids, path); |
| if (r < 0) |
| return sd_bus_error_set_errnof(error, r, "Failed to attach processes to control group: %m"); |
| |
| return sd_bus_reply_method_return(message, NULL); |
| } |
| |
| const sd_bus_vtable bus_unit_cgroup_vtable[] = { |
| SD_BUS_VTABLE_START(0), |
| SD_BUS_PROPERTY("Slice", "s", property_get_slice, 0, 0), |
| SD_BUS_PROPERTY("ControlGroup", "s", property_get_cgroup, 0, 0), |
| SD_BUS_PROPERTY("MemoryCurrent", "t", property_get_current_memory, 0, 0), |
| SD_BUS_PROPERTY("CPUUsageNSec", "t", property_get_cpu_usage, 0, 0), |
| SD_BUS_PROPERTY("EffectiveCPUs", "ay", property_get_cpuset_cpus, 0, 0), |
| SD_BUS_PROPERTY("EffectiveMemoryNodes", "ay", property_get_cpuset_mems, 0, 0), |
| SD_BUS_PROPERTY("TasksCurrent", "t", property_get_current_tasks, 0, 0), |
| SD_BUS_PROPERTY("IPIngressBytes", "t", property_get_ip_counter, 0, 0), |
| SD_BUS_PROPERTY("IPIngressPackets", "t", property_get_ip_counter, 0, 0), |
| SD_BUS_PROPERTY("IPEgressBytes", "t", property_get_ip_counter, 0, 0), |
| SD_BUS_PROPERTY("IPEgressPackets", "t", property_get_ip_counter, 0, 0), |
| SD_BUS_PROPERTY("IOReadBytes", "t", property_get_io_counter, 0, 0), |
| SD_BUS_PROPERTY("IOReadOperations", "t", property_get_io_counter, 0, 0), |
| SD_BUS_PROPERTY("IOWriteBytes", "t", property_get_io_counter, 0, 0), |
| SD_BUS_PROPERTY("IOWriteOperations", "t", property_get_io_counter, 0, 0), |
| SD_BUS_METHOD("GetProcesses", NULL, "a(sus)", bus_unit_method_get_processes, SD_BUS_VTABLE_UNPRIVILEGED), |
| SD_BUS_METHOD("AttachProcesses", "sau", NULL, bus_unit_method_attach_processes, SD_BUS_VTABLE_UNPRIVILEGED), |
| SD_BUS_VTABLE_END |
| }; |
| |
| static int send_new_signal(sd_bus *bus, void *userdata) { |
| _cleanup_(sd_bus_message_unrefp) sd_bus_message *m = NULL; |
| _cleanup_free_ char *p = NULL; |
| Unit *u = userdata; |
| int r; |
| |
| assert(bus); |
| assert(u); |
| |
| p = unit_dbus_path(u); |
| if (!p) |
| return -ENOMEM; |
| |
| r = sd_bus_message_new_signal( |
| bus, |
| &m, |
| "/org/freedesktop/systemd1", |
| "org.freedesktop.systemd1.Manager", |
| "UnitNew"); |
| if (r < 0) |
| return r; |
| |
| r = sd_bus_message_append(m, "so", u->id, p); |
| if (r < 0) |
| return r; |
| |
| return sd_bus_send(bus, m, NULL); |
| } |
| |
| static int send_changed_signal(sd_bus *bus, void *userdata) { |
| _cleanup_free_ char *p = NULL; |
| Unit *u = userdata; |
| int r; |
| |
| assert(bus); |
| assert(u); |
| |
| p = unit_dbus_path(u); |
| if (!p) |
| return -ENOMEM; |
| |
| /* Send a properties changed signal. First for the specific |
| * type, then for the generic unit. The clients may rely on |
| * this order to get atomic behavior if needed. */ |
| |
| r = sd_bus_emit_properties_changed_strv( |
| bus, p, |
| unit_dbus_interface_from_type(u->type), |
| NULL); |
| if (r < 0) |
| return r; |
| |
| return sd_bus_emit_properties_changed_strv( |
| bus, p, |
| "org.freedesktop.systemd1.Unit", |
| NULL); |
| } |
| |
| void bus_unit_send_change_signal(Unit *u) { |
| int r; |
| assert(u); |
| |
| if (u->in_dbus_queue) { |
| LIST_REMOVE(dbus_queue, u->manager->dbus_unit_queue, u); |
| u->in_dbus_queue = false; |
| } |
| |
| if (!u->id) |
| return; |
| |
| r = bus_foreach_bus(u->manager, u->bus_track, u->sent_dbus_new_signal ? send_changed_signal : send_new_signal, u); |
| if (r < 0) |
| log_unit_debug_errno(u, r, "Failed to send unit change signal for %s: %m", u->id); |
| |
| u->sent_dbus_new_signal = true; |
| } |
| |
| void bus_unit_send_pending_change_signal(Unit *u, bool including_new) { |
| |
| /* Sends out any pending change signals, but only if they really are pending. This call is used when we are |
| * about to change state in order to force out a PropertiesChanged signal beforehand if there was one pending |
| * so that clients can follow the full state transition */ |
| |
| if (!u->in_dbus_queue) /* If not enqueued, don't bother */ |
| return; |
| |
| if (!u->sent_dbus_new_signal && !including_new) /* If the unit was never announced, don't bother, it's fine if |
| * the unit appears in the new state right-away (except if the |
| * caller explicitly asked us to send it anyway) */ |
| return; |
| |
| if (MANAGER_IS_RELOADING(u->manager)) /* Don't generate unnecessary PropertiesChanged signals for the same unit |
| * when we are reloading. */ |
| return; |
| |
| bus_unit_send_change_signal(u); |
| } |
| |
| static int send_removed_signal(sd_bus *bus, void *userdata) { |
| _cleanup_(sd_bus_message_unrefp) sd_bus_message *m = NULL; |
| _cleanup_free_ char *p = NULL; |
| Unit *u = userdata; |
| int r; |
| |
| assert(bus); |
| assert(u); |
| |
| p = unit_dbus_path(u); |
| if (!p) |
| return -ENOMEM; |
| |
| r = sd_bus_message_new_signal( |
| bus, |
| &m, |
| "/org/freedesktop/systemd1", |
| "org.freedesktop.systemd1.Manager", |
| "UnitRemoved"); |
| if (r < 0) |
| return r; |
| |
| r = sd_bus_message_append(m, "so", u->id, p); |
| if (r < 0) |
| return r; |
| |
| return sd_bus_send(bus, m, NULL); |
| } |
| |
| void bus_unit_send_removed_signal(Unit *u) { |
| int r; |
| assert(u); |
| |
| if (!u->sent_dbus_new_signal || u->in_dbus_queue) |
| bus_unit_send_change_signal(u); |
| |
| if (!u->id) |
| return; |
| |
| r = bus_foreach_bus(u->manager, u->bus_track, send_removed_signal, u); |
| if (r < 0) |
| log_unit_debug_errno(u, r, "Failed to send unit remove signal for %s: %m", u->id); |
| } |
| |
| int bus_unit_queue_job( |
| sd_bus_message *message, |
| Unit *u, |
| JobType type, |
| JobMode mode, |
| BusUnitQueueFlags flags, |
| sd_bus_error *error) { |
| |
| _cleanup_(sd_bus_message_unrefp) sd_bus_message *reply = NULL; |
| _cleanup_free_ char *job_path = NULL, *unit_path = NULL; |
| _cleanup_(set_freep) Set *affected = NULL; |
| Iterator i; |
| Job *j, *a; |
| int r; |
| |
| assert(message); |
| assert(u); |
| assert(type >= 0 && type < _JOB_TYPE_MAX); |
| assert(mode >= 0 && mode < _JOB_MODE_MAX); |
| |
| r = mac_selinux_unit_access_check( |
| u, message, |
| job_type_to_access_method(type), |
| error); |
| if (r < 0) |
| return r; |
| |
| if (FLAGS_SET(flags, BUS_UNIT_QUEUE_RELOAD_IF_POSSIBLE) && unit_can_reload(u)) { |
| if (type == JOB_RESTART) |
| type = JOB_RELOAD_OR_START; |
| else if (type == JOB_TRY_RESTART) |
| type = JOB_TRY_RELOAD; |
| } |
| |
| if (type == JOB_STOP && |
| IN_SET(u->load_state, UNIT_NOT_FOUND, UNIT_ERROR, UNIT_BAD_SETTING) && |
| unit_active_state(u) == UNIT_INACTIVE) |
| return sd_bus_error_setf(error, BUS_ERROR_NO_SUCH_UNIT, "Unit %s not loaded.", u->id); |
| |
| if ((type == JOB_START && u->refuse_manual_start) || |
| (type == JOB_STOP && u->refuse_manual_stop) || |
| (IN_SET(type, JOB_RESTART, JOB_TRY_RESTART) && (u->refuse_manual_start || u->refuse_manual_stop)) || |
| (type == JOB_RELOAD_OR_START && job_type_collapse(type, u) == JOB_START && u->refuse_manual_start)) |
| return sd_bus_error_setf(error, BUS_ERROR_ONLY_BY_DEPENDENCY, "Operation refused, unit %s may be requested by dependency only (it is configured to refuse manual start/stop).", u->id); |
| |
| if (FLAGS_SET(flags, BUS_UNIT_QUEUE_VERBOSE_REPLY)) { |
| affected = set_new(NULL); |
| if (!affected) |
| return -ENOMEM; |
| } |
| |
| r = manager_add_job(u->manager, type, u, mode, affected, error, &j); |
| if (r < 0) |
| return r; |
| |
| r = bus_job_track_sender(j, message); |
| if (r < 0) |
| return r; |
| |
| /* Before we send the method reply, force out the announcement JobNew for this job */ |
| bus_job_send_pending_change_signal(j, true); |
| |
| job_path = job_dbus_path(j); |
| if (!job_path) |
| return -ENOMEM; |
| |
| /* The classic response is just a job object path */ |
| if (!FLAGS_SET(flags, BUS_UNIT_QUEUE_VERBOSE_REPLY)) |
| return sd_bus_reply_method_return(message, "o", job_path); |
| |
| /* In verbose mode respond with the anchor job plus everything that has been affected */ |
| r = sd_bus_message_new_method_return(message, &reply); |
| if (r < 0) |
| return r; |
| |
| unit_path = unit_dbus_path(j->unit); |
| if (!unit_path) |
| return -ENOMEM; |
| |
| r = sd_bus_message_append(reply, "uosos", |
| j->id, job_path, |
| j->unit->id, unit_path, |
| job_type_to_string(j->type)); |
| if (r < 0) |
| return r; |
| |
| r = sd_bus_message_open_container(reply, 'a', "(uosos)"); |
| if (r < 0) |
| return r; |
| |
| SET_FOREACH(a, affected, i) { |
| |
| if (a->id == j->id) |
| continue; |
| |
| /* Free paths from previous iteration */ |
| job_path = mfree(job_path); |
| unit_path = mfree(unit_path); |
| |
| job_path = job_dbus_path(a); |
| if (!job_path) |
| return -ENOMEM; |
| |
| unit_path = unit_dbus_path(a->unit); |
| if (!unit_path) |
| return -ENOMEM; |
| |
| r = sd_bus_message_append(reply, "(uosos)", |
| a->id, job_path, |
| a->unit->id, unit_path, |
| job_type_to_string(a->type)); |
| if (r < 0) |
| return r; |
| } |
| |
| r = sd_bus_message_close_container(reply); |
| if (r < 0) |
| return r; |
| |
| return sd_bus_send(NULL, reply, NULL); |
| } |
| |
| static int bus_unit_set_live_property( |
| Unit *u, |
| const char *name, |
| sd_bus_message *message, |
| UnitWriteFlags flags, |
| sd_bus_error *error) { |
| |
| int r; |
| |
| assert(u); |
| assert(name); |
| assert(message); |
| |
| /* Handles setting properties both "live" (i.e. at any time during runtime), and during creation (for transient |
| * units that are being created). */ |
| |
| if (streq(name, "Description")) { |
| const char *d; |
| |
| r = sd_bus_message_read(message, "s", &d); |
| if (r < 0) |
| return r; |
| |
| if (!UNIT_WRITE_FLAGS_NOOP(flags)) { |
| r = unit_set_description(u, d); |
| if (r < 0) |
| return r; |
| |
| unit_write_settingf(u, flags|UNIT_ESCAPE_SPECIFIERS, name, "Description=%s", d); |
| } |
| |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| static int bus_set_transient_emergency_action( |
| Unit *u, |
| const char *name, |
| EmergencyAction *p, |
| sd_bus_message *message, |
| UnitWriteFlags flags, |
| sd_bus_error *error) { |
| |
| const char *s; |
| EmergencyAction v; |
| int r; |
| bool system; |
| |
| assert(p); |
| |
| r = sd_bus_message_read(message, "s", &s); |
| if (r < 0) |
| return r; |
| |
| system = MANAGER_IS_SYSTEM(u->manager); |
| r = parse_emergency_action(s, system, &v); |
| if (r < 0) |
| return sd_bus_error_setf(error, SD_BUS_ERROR_INVALID_ARGS, |
| r == -EOPNOTSUPP ? "%s setting invalid for manager type: %s" |
| : "Invalid %s setting: %s", |
| name, s); |
| |
| if (!UNIT_WRITE_FLAGS_NOOP(flags)) { |
| *p = v; |
| unit_write_settingf(u, flags, name, |
| "%s=%s", name, s); |
| } |
| |
| return 1; |
| } |
| |
| static int bus_set_transient_exit_status( |
| Unit *u, |
| const char *name, |
| int *p, |
| sd_bus_message *message, |
| UnitWriteFlags flags, |
| sd_bus_error *error) { |
| |
| int32_t k; |
| int r; |
| |
| assert(p); |
| |
| r = sd_bus_message_read(message, "i", &k); |
| if (r < 0) |
| return r; |
| |
| if (k > 255) |
| return sd_bus_error_setf(error, SD_BUS_ERROR_INVALID_ARGS, "Exit status must be in range 0…255 or negative."); |
| |
| if (!UNIT_WRITE_FLAGS_NOOP(flags)) { |
| *p = k < 0 ? -1 : k; |
| |
| if (k < 0) |
| unit_write_settingf(u, flags, name, "%s=", name); |
| else |
| unit_write_settingf(u, flags, name, "%s=%i", name, k); |
| } |
| |
| return 1; |
| } |
| |
| static BUS_DEFINE_SET_TRANSIENT_PARSE(collect_mode, CollectMode, collect_mode_from_string); |
| static BUS_DEFINE_SET_TRANSIENT_PARSE(job_mode, JobMode, job_mode_from_string); |
| |
| static int bus_set_transient_conditions( |
| Unit *u, |
| const char *name, |
| Condition **list, |
| bool is_condition, |
| sd_bus_message *message, |
| UnitWriteFlags flags, |
| sd_bus_error *error) { |
| |
| const char *type_name, *param; |
| int trigger, negate, r; |
| bool empty = true; |
| |
| assert(list); |
| |
| r = sd_bus_message_enter_container(message, 'a', "(sbbs)"); |
| if (r < 0) |
| return r; |
| |
| while ((r = sd_bus_message_read(message, "(sbbs)", &type_name, &trigger, &negate, ¶m)) > 0) { |
| ConditionType t; |
| |
| t = is_condition ? condition_type_from_string(type_name) : assert_type_from_string(type_name); |
| if (t < 0) |
| return sd_bus_error_setf(error, SD_BUS_ERROR_INVALID_ARGS, "Invalid condition type: %s", type_name); |
| |
| if (t != CONDITION_NULL) { |
| if (isempty(param)) |
| return sd_bus_error_setf(error, SD_BUS_ERROR_INVALID_ARGS, "Condition parameter in %s is empty", type_name); |
| |
| if (condition_takes_path(t) && !path_is_absolute(param)) |
| return sd_bus_error_setf(error, SD_BUS_ERROR_INVALID_ARGS, "Path in condition %s is not absolute: %s", type_name, param); |
| } else |
| param = NULL; |
| |
| if (!UNIT_WRITE_FLAGS_NOOP(flags)) { |
| Condition *c; |
| |
| c = condition_new(t, param, trigger, negate); |
| if (!c) |
| return -ENOMEM; |
| |
| LIST_PREPEND(conditions, *list, c); |
| |
| if (t != CONDITION_NULL) |
| unit_write_settingf(u, flags|UNIT_ESCAPE_SPECIFIERS, name, |
| "%s=%s%s%s", type_name, |
| trigger ? "|" : "", negate ? "!" : "", param); |
| else |
| unit_write_settingf(u, flags, name, |
| "%s=%s%s", type_name, |
| trigger ? "|" : "", yes_no(!negate)); |
| } |
| |
| empty = false; |
| } |
| if (r < 0) |
| return r; |
| |
| r = sd_bus_message_exit_container(message); |
| if (r < 0) |
| return r; |
| |
| if (!UNIT_WRITE_FLAGS_NOOP(flags) && empty) { |
| *list = condition_free_list(*list); |
| unit_write_settingf(u, flags, name, "%sNull=", is_condition ? "Condition" : "Assert"); |
| } |
| |
| return 1; |
| } |
| |
| static int bus_unit_set_transient_property( |
| Unit *u, |
| const char *name, |
| sd_bus_message *message, |
| UnitWriteFlags flags, |
| sd_bus_error *error) { |
| |
| UnitDependency d = _UNIT_DEPENDENCY_INVALID; |
| int r; |
| |
| assert(u); |
| assert(name); |
| assert(message); |
| |
| /* Handles settings when transient units are created. This settings cannot be altered anymore after the unit |
| * has been created. */ |
| |
| if (streq(name, "SourcePath")) |
| return bus_set_transient_path(u, name, &u->source_path, message, flags, error); |
| |
| if (streq(name, "StopWhenUnneeded")) |
| return bus_set_transient_bool(u, name, &u->stop_when_unneeded, message, flags, error); |
| |
| if (streq(name, "RefuseManualStart")) |
| return bus_set_transient_bool(u, name, &u->refuse_manual_start, message, flags, error); |
| |
| if (streq(name, "RefuseManualStop")) |
| return bus_set_transient_bool(u, name, &u->refuse_manual_stop, message, flags, error); |
| |
| if (streq(name, "AllowIsolate")) |
| return bus_set_transient_bool(u, name, &u->allow_isolate, message, flags, error); |
| |
| if (streq(name, "DefaultDependencies")) |
| return bus_set_transient_bool(u, name, &u->default_dependencies, message, flags, error); |
| |
| if (streq(name, "OnFailureJobMode")) |
| return bus_set_transient_job_mode(u, name, &u->on_failure_job_mode, message, flags, error); |
| |
| if (streq(name, "IgnoreOnIsolate")) |
| return bus_set_transient_bool(u, name, &u->ignore_on_isolate, message, flags, error); |
| |
| if (streq(name, "JobTimeoutUSec")) { |
| r = bus_set_transient_usec_fix_0(u, name, &u->job_timeout, message, flags, error); |
| if (r >= 0 && !UNIT_WRITE_FLAGS_NOOP(flags) && !u->job_running_timeout_set) |
| u->job_running_timeout = u->job_timeout; |
| } |
| |
| if (streq(name, "JobRunningTimeoutUSec")) { |
| r = bus_set_transient_usec_fix_0(u, name, &u->job_running_timeout, message, flags, error); |
| if (r >= 0 && !UNIT_WRITE_FLAGS_NOOP(flags)) |
| u->job_running_timeout_set = true; |
| |
| return r; |
| } |
| |
| if (streq(name, "JobTimeoutAction")) |
| return bus_set_transient_emergency_action(u, name, &u->job_timeout_action, message, flags, error); |
| |
| if (streq(name, "JobTimeoutRebootArgument")) |
| return bus_set_transient_string(u, name, &u->job_timeout_reboot_arg, message, flags, error); |
| |
| if (streq(name, "StartLimitIntervalUSec")) |
| return bus_set_transient_usec(u, name, &u->start_ratelimit.interval, message, flags, error); |
| |
| if (streq(name, "StartLimitBurst")) |
| return bus_set_transient_unsigned(u, name, &u->start_ratelimit.burst, message, flags, error); |
| |
| if (streq(name, "StartLimitAction")) |
| return bus_set_transient_emergency_action(u, name, &u->start_limit_action, message, flags, error); |
| |
| if (streq(name, "FailureAction")) |
| return bus_set_transient_emergency_action(u, name, &u->failure_action, message, flags, error); |
| |
| if (streq(name, "SuccessAction")) |
| return bus_set_transient_emergency_action(u, name, &u->success_action, message, flags, error); |
| |
| if (streq(name, "FailureActionExitStatus")) |
| return bus_set_transient_exit_status(u, name, &u->failure_action_exit_status, message, flags, error); |
| |
| if (streq(name, "SuccessActionExitStatus")) |
| return bus_set_transient_exit_status(u, name, &u->success_action_exit_status, message, flags, error); |
| |
| if (streq(name, "RebootArgument")) |
| return bus_set_transient_string(u, name, &u->reboot_arg, message, flags, error); |
| |
| if (streq(name, "CollectMode")) |
| return bus_set_transient_collect_mode(u, name, &u->collect_mode, message, flags, error); |
| |
| if (streq(name, "Conditions")) |
| return bus_set_transient_conditions(u, name, &u->conditions, true, message, flags, error); |
| |
| if (streq(name, "Asserts")) |
| return bus_set_transient_conditions(u, name, &u->asserts, false, message, flags, error); |
| |
| if (streq(name, "Documentation")) { |
| _cleanup_strv_free_ char **l = NULL; |
| char **p; |
| |
| r = sd_bus_message_read_strv(message, &l); |
| if (r < 0) |
| return r; |
| |
| STRV_FOREACH(p, l) { |
| if (!documentation_url_is_valid(*p)) |
| return sd_bus_error_setf(error, SD_BUS_ERROR_INVALID_ARGS, "Invalid URL in %s: %s", name, *p); |
| } |
| |
| if (!UNIT_WRITE_FLAGS_NOOP(flags)) { |
| if (strv_isempty(l)) { |
| u->documentation = strv_free(u->documentation); |
| unit_write_settingf(u, flags, name, "%s=", name); |
| } else { |
| strv_extend_strv(&u->documentation, l, false); |
| |
| STRV_FOREACH(p, l) |
| unit_write_settingf(u, flags, name, "%s=%s", name, *p); |
| } |
| } |
| |
| return 1; |
| |
| } else if (streq(name, "Slice")) { |
| Unit *slice; |
| const char *s; |
| |
| if (!UNIT_HAS_CGROUP_CONTEXT(u)) |
| return sd_bus_error_setf(error, SD_BUS_ERROR_INVALID_ARGS, "The slice property is only available for units with control groups."); |
| if (u->type == UNIT_SLICE) |
| return sd_bus_error_setf(error, SD_BUS_ERROR_INVALID_ARGS, "Slice may not be set for slice units."); |
| if (unit_has_name(u, SPECIAL_INIT_SCOPE)) |
| return sd_bus_error_setf(error, SD_BUS_ERROR_INVALID_ARGS, "Cannot set slice for init.scope"); |
| |
| r = sd_bus_message_read(message, "s", &s); |
| if (r < 0) |
| return r; |
| |
| if (!unit_name_is_valid(s, UNIT_NAME_PLAIN)) |
| return sd_bus_error_setf(error, SD_BUS_ERROR_INVALID_ARGS, "Invalid unit name '%s'", s); |
| |
| /* Note that we do not dispatch the load queue here yet, as we don't want our own transient unit to be |
| * loaded while we are still setting it up. Or in other words, we use manager_load_unit_prepare() |
| * instead of manager_load_unit() on purpose, here. */ |
| r = manager_load_unit_prepare(u->manager, s, NULL, error, &slice); |
| if (r < 0) |
| return r; |
| |
| if (slice->type != UNIT_SLICE) |
| return sd_bus_error_setf(error, SD_BUS_ERROR_INVALID_ARGS, "Unit name '%s' is not a slice", s); |
| |
| if (!UNIT_WRITE_FLAGS_NOOP(flags)) { |
| r = unit_set_slice(u, slice); |
| if (r < 0) |
| return r; |
| |
| unit_write_settingf(u, flags|UNIT_PRIVATE, name, "Slice=%s", s); |
| } |
| |
| return 1; |
| |
| } else if (streq(name, "RequiresMountsFor")) { |
| _cleanup_strv_free_ char **l = NULL; |
| char **p; |
| |
| r = sd_bus_message_read_strv(message, &l); |
| if (r < 0) |
| return r; |
| |
| STRV_FOREACH(p, l) { |
| path_simplify(*p, true); |
| |
| if (!path_is_absolute(*p)) |
| return sd_bus_error_setf(error, SD_BUS_ERROR_INVALID_ARGS, "Path specified in %s is not absolute: %s", name, *p); |
| |
| if (!path_is_valid(*p)) |
| return sd_bus_error_setf(error, SD_BUS_ERROR_INVALID_ARGS, "Path specified in %s has invalid length: %s", name, *p); |
| |
| if (!path_is_normalized(*p)) |
| return sd_bus_error_setf(error, SD_BUS_ERROR_INVALID_ARGS, "Path specified in %s is not normalized: %s", name, *p); |
| |
| if (!UNIT_WRITE_FLAGS_NOOP(flags)) { |
| r = unit_require_mounts_for(u, *p, UNIT_DEPENDENCY_FILE); |
| if (r < 0) |
| return sd_bus_error_setf(error, SD_BUS_ERROR_INVALID_ARGS, "Failed to add required mount \"%s\": %m", *p); |
| |
| unit_write_settingf(u, flags, name, "%s=%s", name, *p); |
| } |
| } |
| |
| return 1; |
| } |
| |
| if (streq(name, "RequiresOverridable")) |
| d = UNIT_REQUIRES; /* redirect for obsolete unit dependency type */ |
| else if (streq(name, "RequisiteOverridable")) |
| d = UNIT_REQUISITE; /* same here */ |
| else |
| d = unit_dependency_from_string(name); |
| |
| if (d >= 0) { |
| const char *other; |
| |
| if (!IN_SET(d, |
| UNIT_REQUIRES, |
| UNIT_REQUISITE, |
| UNIT_WANTS, |
| UNIT_BINDS_TO, |
| UNIT_PART_OF, |
| UNIT_CONFLICTS, |
| UNIT_BEFORE, |
| UNIT_AFTER, |
| UNIT_ON_FAILURE, |
| UNIT_PROPAGATES_RELOAD_TO, |
| UNIT_RELOAD_PROPAGATED_FROM, |
| UNIT_JOINS_NAMESPACE_OF)) |
| return sd_bus_error_setf(error, SD_BUS_ERROR_INVALID_ARGS, "Dependency type %s may not be created transiently.", unit_dependency_to_string(d)); |
| |
| r = sd_bus_message_enter_container(message, 'a', "s"); |
| if (r < 0) |
| return r; |
| |
| while ((r = sd_bus_message_read(message, "s", &other)) > 0) { |
| if (!unit_name_is_valid(other, UNIT_NAME_PLAIN|UNIT_NAME_INSTANCE)) |
| return sd_bus_error_setf(error, SD_BUS_ERROR_INVALID_ARGS, "Invalid unit name %s", other); |
| |
| if (!UNIT_WRITE_FLAGS_NOOP(flags)) { |
| _cleanup_free_ char *label = NULL; |
| |
| r = unit_add_dependency_by_name(u, d, other, true, UNIT_DEPENDENCY_FILE); |
| if (r < 0) |
| return r; |
| |
| label = strjoin(name, "-", other); |
| if (!label) |
| return -ENOMEM; |
| |
| unit_write_settingf(u, flags, label, "%s=%s", unit_dependency_to_string(d), other); |
| } |
| |
| } |
| if (r < 0) |
| return r; |
| |
| r = sd_bus_message_exit_container(message); |
| if (r < 0) |
| return r; |
| |
| return 1; |
| |
| } else if (streq(name, "AddRef")) { |
| |
| int b; |
| |
| /* Why is this called "AddRef" rather than just "Ref", or "Reference"? There's already a "Ref()" method |
| * on the Unit interface, and it's probably not a good idea to expose a property and a method on the |
| * same interface (well, strictly speaking AddRef isn't exposed as full property, we just read it for |
| * transient units, but still). And "References" and "ReferencedBy" is already used as unit reference |
| * dependency type, hence let's not confuse things with that. |
| * |
| * Note that we don't actually add the reference to the bus track. We do that only after the setup of |
| * the transient unit is complete, so that setting this property multiple times in the same transient |
| * unit creation call doesn't count as individual references. */ |
| |
| r = sd_bus_message_read(message, "b", &b); |
| if (r < 0) |
| return r; |
| |
| if (!UNIT_WRITE_FLAGS_NOOP(flags)) |
| u->bus_track_add = b; |
| |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| int bus_unit_set_properties( |
| Unit *u, |
| sd_bus_message *message, |
| UnitWriteFlags flags, |
| bool commit, |
| sd_bus_error *error) { |
| |
| bool for_real = false; |
| unsigned n = 0; |
| int r; |
| |
| assert(u); |
| assert(message); |
| |
| /* We iterate through the array twice. First run we just check |
| * if all passed data is valid, second run actually applies |
| * it. This is to implement transaction-like behaviour without |
| * actually providing full transactions. */ |
| |
| r = sd_bus_message_enter_container(message, 'a', "(sv)"); |
| if (r < 0) |
| return r; |
| |
| for (;;) { |
| const char *name; |
| UnitWriteFlags f; |
| |
| r = sd_bus_message_enter_container(message, 'r', "sv"); |
| if (r < 0) |
| return r; |
| if (r == 0) { |
| if (for_real || UNIT_WRITE_FLAGS_NOOP(flags)) |
| break; |
| |
| /* Reached EOF. Let's try again, and this time for realz... */ |
| r = sd_bus_message_rewind(message, false); |
| if (r < 0) |
| return r; |
| |
| for_real = true; |
| continue; |
| } |
| |
| r = sd_bus_message_read(message, "s", &name); |
| if (r < 0) |
| return r; |
| |
| if (!UNIT_VTABLE(u)->bus_set_property) |
| return sd_bus_error_setf(error, SD_BUS_ERROR_PROPERTY_READ_ONLY, "Objects of this type do not support setting properties."); |
| |
| r = sd_bus_message_enter_container(message, 'v', NULL); |
| if (r < 0) |
| return r; |
| |
| /* If not for real, then mask out the two target flags */ |
| f = for_real ? flags : (flags & ~(UNIT_RUNTIME|UNIT_PERSISTENT)); |
| |
| r = UNIT_VTABLE(u)->bus_set_property(u, name, message, f, error); |
| if (r == 0 && u->transient && u->load_state == UNIT_STUB) |
| r = bus_unit_set_transient_property(u, name, message, f, error); |
| if (r == 0) |
| r = bus_unit_set_live_property(u, name, message, f, error); |
| if (r < 0) |
| return r; |
| |
| if (r == 0) |
| return sd_bus_error_setf(error, SD_BUS_ERROR_PROPERTY_READ_ONLY, "Cannot set property %s, or unknown property.", name); |
| |
| r = sd_bus_message_exit_container(message); |
| if (r < 0) |
| return r; |
| |
| r = sd_bus_message_exit_container(message); |
| if (r < 0) |
| return r; |
| |
| n += for_real; |
| } |
| |
| r = sd_bus_message_exit_container(message); |
| if (r < 0) |
| return r; |
| |
| if (commit && n > 0 && UNIT_VTABLE(u)->bus_commit_properties) |
| UNIT_VTABLE(u)->bus_commit_properties(u); |
| |
| return n; |
| } |
| |
| int bus_unit_validate_load_state(Unit *u, sd_bus_error *error) { |
| assert(u); |
| |
| /* Generates a pretty error if a unit isn't properly loaded. */ |
| |
| switch (u->load_state) { |
| |
| case UNIT_LOADED: |
| return 0; |
| |
| case UNIT_NOT_FOUND: |
| return sd_bus_error_setf(error, BUS_ERROR_NO_SUCH_UNIT, "Unit %s not found.", u->id); |
| |
| case UNIT_BAD_SETTING: |
| return sd_bus_error_setf(error, BUS_ERROR_BAD_UNIT_SETTING, "Unit %s has a bad unit file setting.", u->id); |
| |
| case UNIT_ERROR: /* Only show .load_error in UNIT_ERROR state */ |
| return sd_bus_error_set_errnof(error, u->load_error, "Unit %s failed to load properly: %m.", u->id); |
| |
| case UNIT_MASKED: |
| return sd_bus_error_setf(error, BUS_ERROR_UNIT_MASKED, "Unit %s is masked.", u->id); |
| |
| case UNIT_STUB: |
| case UNIT_MERGED: |
| default: |
| return sd_bus_error_setf(error, BUS_ERROR_NO_SUCH_UNIT, "Unexpected load state of unit %s", u->id); |
| } |
| } |
| |
| static int bus_unit_track_handler(sd_bus_track *t, void *userdata) { |
| Unit *u = userdata; |
| |
| assert(t); |
| assert(u); |
| |
| u->bus_track = sd_bus_track_unref(u->bus_track); /* make sure we aren't called again */ |
| |
| /* If the client that tracks us disappeared, then there's reason to believe that the cgroup is empty now too, |
| * let's see */ |
| unit_add_to_cgroup_empty_queue(u); |
| |
| /* Also add the unit to the GC queue, after all if the client left it might be time to GC this unit */ |
| unit_add_to_gc_queue(u); |
| |
| return 0; |
| } |
| |
| static int bus_unit_allocate_bus_track(Unit *u) { |
| int r; |
| |
| assert(u); |
| |
| if (u->bus_track) |
| return 0; |
| |
| r = sd_bus_track_new(u->manager->api_bus, &u->bus_track, bus_unit_track_handler, u); |
| if (r < 0) |
| return r; |
| |
| r = sd_bus_track_set_recursive(u->bus_track, true); |
| if (r < 0) { |
| u->bus_track = sd_bus_track_unref(u->bus_track); |
| return r; |
| } |
| |
| return 0; |
| } |
| |
| int bus_unit_track_add_name(Unit *u, const char *name) { |
| int r; |
| |
| assert(u); |
| |
| r = bus_unit_allocate_bus_track(u); |
| if (r < 0) |
| return r; |
| |
| return sd_bus_track_add_name(u->bus_track, name); |
| } |
| |
| int bus_unit_track_add_sender(Unit *u, sd_bus_message *m) { |
| int r; |
| |
| assert(u); |
| |
| r = bus_unit_allocate_bus_track(u); |
| if (r < 0) |
| return r; |
| |
| return sd_bus_track_add_sender(u->bus_track, m); |
| } |
| |
| int bus_unit_track_remove_sender(Unit *u, sd_bus_message *m) { |
| assert(u); |
| |
| /* If we haven't allocated the bus track object yet, then there's definitely no reference taken yet, return an |
| * error */ |
| if (!u->bus_track) |
| return -EUNATCH; |
| |
| return sd_bus_track_remove_sender(u->bus_track, m); |
| } |