man/systemd-firstboot.xml - systemd-stable - Rivoreo Source Code Repositories

 <?xml version='1.0'?> <!--*-nxml-*-->
 <!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
   "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">

 <!--
   This file is part of systemd.

   Copyright 2014 Lennart Poettering

   systemd is free software; you can redistribute it and/or modify it
   under the terms of the GNU Lesser General Public License as published by
   the Free Software Foundation; either version 2.1 of the License, or
   (at your option) any later version.

   systemd is distributed in the hope that it will be useful, but
   WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
   Lesser General Public License for more details.

   You should have received a copy of the GNU Lesser General Public License
   along with systemd; If not, see <http://www.gnu.org/licenses/>.
 -->

 <refentry id="systemd-firstboot" conditional='ENABLE_FIRSTBOOT'
     xmlns:xi="http://www.w3.org/2001/XInclude">

   <refentryinfo>
     <title>systemd-firstboot</title>
     <productname>systemd</productname>

     <authorgroup>
       <author>
         <contrib>Developer</contrib>
         <firstname>Lennart</firstname>
         <surname>Poettering</surname>
         <email>lennart@poettering.net</email>
       </author>
     </authorgroup>
   </refentryinfo>

   <refmeta>
     <refentrytitle>systemd-firstboot</refentrytitle>
     <manvolnum>1</manvolnum>
   </refmeta>

   <refnamediv>
     <refname>systemd-firstboot</refname>
     <refname>systemd-firstboot.service</refname>
     <refpurpose>Initialize basic system settings on or before the first boot-up of a system</refpurpose>
   </refnamediv>

   <refsynopsisdiv>
     <cmdsynopsis>
       <command>systemd-firstboot</command>
       <arg choice="opt" rep="repeat">OPTIONS</arg>
     </cmdsynopsis>

     <para><filename>systemd-firstboot.service</filename></para>
   </refsynopsisdiv>

   <refsect1>
     <title>Description</title>

     <para><command>systemd-firstboot</command> initializes the most
     basic system settings interactively on the first boot, or
     optionally non-interactively when a system image is created. The
     following settings may be set up:</para>

     <itemizedlist>
       <listitem><para>The system locale, more specifically the two
       locale variables <varname>LANG=</varname> and
       <varname>LC_MESSAGES</varname></para></listitem>

       <listitem><para>The system time zone</para></listitem>

       <listitem><para>The system host name</para></listitem>

       <listitem><para>The machine ID of the system</para></listitem>

       <listitem><para>The root user's password</para></listitem>
     </itemizedlist>

     <para>Each of the fields may either be queried interactively from
     the users, set non-interactively on the tool's command line, or be
     copied from a host system that is used to set up the system
     image.</para>

     <para>If a setting is already initialized it will not be
     overwritten and the user will not be prompted for the
     setting.</para>

     <para>Note that this tool operates directly on the file system and
     does not involve any running system services, unlike
     <citerefentry project='man-pages'><refentrytitle>localectl</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
     <citerefentry><refentrytitle>timedatectl</refentrytitle><manvolnum>1</manvolnum></citerefentry>
     or
     <citerefentry><refentrytitle>hostnamectl</refentrytitle><manvolnum>1</manvolnum></citerefentry>.
     This allows <command>systemd-firstboot</command> to operate on
     mounted but not booted disk images and in early boot. It is not
     recommended to use <command>systemd-firstboot</command> on the
     running system while it is up.</para>
   </refsect1>

   <refsect1>
     <title>Options</title>

     <para>The following options are understood:</para>

     <variablelist>
       <varlistentry>
         <term><option>--root=<replaceable>root</replaceable></option></term>
         <listitem><para>Takes a directory path as an argument. All
         paths will be prefixed with the given alternate
         <replaceable>root</replaceable> path, including config search
         paths. This is useful to operate on a system image mounted to
         the specified directory instead of the host system itself.
         </para></listitem>
       </varlistentry>

       <varlistentry>
         <term><option>--locale=<replaceable>LOCALE</replaceable></option></term>
         <term><option>--locale-messages=<replaceable>LOCALE</replaceable></option></term>

         <listitem><para>Sets the system locale, more specifically the
         <varname>LANG=</varname> and <varname>LC_MESSAGES</varname>
         settings. The argument should be a valid locale identifier,
         such as <literal>de_DE.UTF-8</literal>. This controls the
         <citerefentry project='man-pages'><refentrytitle>locale.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>
         configuration file.</para></listitem>
       </varlistentry>

       <varlistentry>
         <term><option>--timezone=<replaceable>TIMEZONE</replaceable></option></term>

         <listitem><para>Sets the system time zone. The argument should
         be a valid time zone identifier, such as
         <literal>Europe/Berlin</literal>. This controls the
         <citerefentry><refentrytitle>localtime</refentrytitle><manvolnum>5</manvolnum></citerefentry>
         symlink.</para></listitem>
       </varlistentry>

       <varlistentry>
         <term><option>--hostname=<replaceable>HOSTNAME</replaceable></option></term>

         <listitem><para>Sets the system hostname. The argument should
         be a host name, compatible with DNS. This controls the
         <citerefentry><refentrytitle>hostname</refentrytitle><manvolnum>5</manvolnum></citerefentry>
         configuration file.</para></listitem>
       </varlistentry>

       <varlistentry>
         <term><option>--machine-id=<replaceable>ID</replaceable></option></term>

         <listitem><para>Sets the system's machine ID. This controls
         the
         <citerefentry><refentrytitle>machine-id</refentrytitle><manvolnum>5</manvolnum></citerefentry>
         file.</para></listitem>
       </varlistentry>

       <varlistentry>
         <term><option>--root-password=<replaceable>PASSWORD</replaceable></option></term>
         <term><option>--root-password-file=<replaceable>PATH</replaceable></option></term>

         <listitem><para>Sets the password of the system's root user.
         This creates a
         <citerefentry project='die-net'><refentrytitle>shadow</refentrytitle><manvolnum>5</manvolnum></citerefentry>
         file. This setting exists in two forms:
         <option>--root-password=</option> accepts the password to set
         directly on the command line,
         <option>--root-password-file=</option> reads it from a file.
         Note that it is not recommended specifying passwords on the
         command line as other users might be able to see them simply
         by invoking
         <citerefentry project='die-net'><refentrytitle>ps</refentrytitle><manvolnum>1</manvolnum></citerefentry>.</para></listitem>
       </varlistentry>

       <varlistentry>
         <term><option>--prompt-locale</option></term>
         <term><option>--prompt-timezone</option></term>
         <term><option>--prompt-hostname</option></term>
         <term><option>--prompt-root-password</option></term>

         <listitem><para>Prompt the user interactively for a specific
         basic setting. Note that any explicit configuration settings
         specified on the command line take precedence, and the user is
         not prompted for it.</para></listitem>
       </varlistentry>

       <varlistentry>
         <term><option>--prompt</option></term>

         <listitem><para>Query the user for locale, timezone, hostname
         and root password. This is equivalent to specifying
         <option>--prompt-locale</option>,
         <option>--prompt-timezone</option>,
         <option>--prompt-hostname</option>,
         <option>--prompt-root-password</option> in combination.</para>
         </listitem>
       </varlistentry>

       <varlistentry>
         <term><option>--copy-locale</option></term>
         <term><option>--copy-timezone</option></term>
         <term><option>--copy-root-password</option></term>

         <listitem><para>Copy a specific basic setting from the host.
         This only works in combination with <option>--root=</option>
         (see above).</para></listitem>
       </varlistentry>

       <varlistentry>
         <term><option>--copy</option></term>

         <listitem><para>Copy locale, time zone and root password from
         the host. This is equivalent to specifying
         <option>--copy-locale</option>,
         <option>--copy-timezone</option>,
         <option>--copy-root-password</option> in combination.</para>
         </listitem>
       </varlistentry>

       <varlistentry>
         <term><option>--setup-machine-id</option></term>

         <listitem><para>Initialize the system's machine ID to a random
         ID. This only works in combination with
         <option>--root=</option>.</para></listitem>
       </varlistentry>

       <xi:include href="standard-options.xml" xpointer="help" />
       <xi:include href="standard-options.xml" xpointer="version" />
     </variablelist>

   </refsect1>

   <refsect1>
     <title>Exit status</title>

     <para>On success, 0 is returned, a non-zero failure code
     otherwise.</para>
   </refsect1>

   <refsect1>
     <title>See Also</title>
     <para>
       <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
       <citerefentry project='man-pages'><refentrytitle>locale.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
       <citerefentry><refentrytitle>localtime</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
       <citerefentry><refentrytitle>hostname</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
       <citerefentry><refentrytitle>machine-id</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
       <citerefentry project='die-net'><refentrytitle>shadow</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
       <citerefentry><refentrytitle>systemd-machine-id-setup</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
       <citerefentry project='man-pages'><refentrytitle>localectl</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
       <citerefentry><refentrytitle>timedatectl</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
       <citerefentry><refentrytitle>hostnamectl</refentrytitle><manvolnum>1</manvolnum></citerefentry>
     </para>
   </refsect1>

 </refentry>
	<?xml version='1.0'?> <!---nxml--->
	<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
	"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">

	<!--
	This file is part of systemd.

	Copyright 2014 Lennart Poettering

	systemd is free software; you can redistribute it and/or modify it
	under the terms of the GNU Lesser General Public License as published by
	the Free Software Foundation; either version 2.1 of the License, or
	(at your option) any later version.

	systemd is distributed in the hope that it will be useful, but
	WITHOUT ANY WARRANTY; without even the implied warranty of
	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
	Lesser General Public License for more details.

	You should have received a copy of the GNU Lesser General Public License
	along with systemd; If not, see <http://www.gnu.org/licenses/>.
	-->

	<refentry id="systemd-firstboot" conditional='ENABLE_FIRSTBOOT'
	xmlns:xi="http://www.w3.org/2001/XInclude">

	<refentryinfo>
	<title>systemd-firstboot</title>
	<productname>systemd</productname>

	<authorgroup>
	<author>
	<contrib>Developer</contrib>
	<firstname>Lennart</firstname>
	<surname>Poettering</surname>
	<email>lennart@poettering.net</email>
	</author>
	</authorgroup>
	</refentryinfo>

	<refmeta>
	<refentrytitle>systemd-firstboot</refentrytitle>
	<manvolnum>1</manvolnum>
	</refmeta>

	<refnamediv>
	<refname>systemd-firstboot</refname>
	<refname>systemd-firstboot.service</refname>
	<refpurpose>Initialize basic system settings on or before the first boot-up of a system</refpurpose>
	</refnamediv>

	<refsynopsisdiv>
	<cmdsynopsis>
	<command>systemd-firstboot</command>
	<arg choice="opt" rep="repeat">OPTIONS</arg>
	</cmdsynopsis>

	<para><filename>systemd-firstboot.service</filename></para>
	</refsynopsisdiv>

	<refsect1>
	<title>Description</title>

	<para><command>systemd-firstboot</command> initializes the most
	basic system settings interactively on the first boot, or
	optionally non-interactively when a system image is created. The
	following settings may be set up:</para>

	<itemizedlist>
	<listitem><para>The system locale, more specifically the two
	locale variables <varname>LANG=</varname> and
	<varname>LC_MESSAGES</varname></para></listitem>

	<listitem><para>The system time zone</para></listitem>

	<listitem><para>The system host name</para></listitem>

	<listitem><para>The machine ID of the system</para></listitem>

	<listitem><para>The root user's password</para></listitem>
	</itemizedlist>

	<para>Each of the fields may either be queried interactively from
	the users, set non-interactively on the tool's command line, or be
	copied from a host system that is used to set up the system
	image.</para>

	<para>If a setting is already initialized it will not be
	overwritten and the user will not be prompted for the
	setting.</para>

	<para>Note that this tool operates directly on the file system and
	does not involve any running system services, unlike
	<citerefentry project='man-pages'><refentrytitle>localectl</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
	<citerefentry><refentrytitle>timedatectl</refentrytitle><manvolnum>1</manvolnum></citerefentry>
	or
	<citerefentry><refentrytitle>hostnamectl</refentrytitle><manvolnum>1</manvolnum></citerefentry>.
	This allows <command>systemd-firstboot</command> to operate on
	mounted but not booted disk images and in early boot. It is not
	recommended to use <command>systemd-firstboot</command> on the
	running system while it is up.</para>
	</refsect1>

	<refsect1>
	<title>Options</title>

	<para>The following options are understood:</para>

	<variablelist>
	<varlistentry>
	<term><option>--root=<replaceable>root</replaceable></option></term>
	<listitem><para>Takes a directory path as an argument. All
	paths will be prefixed with the given alternate
	<replaceable>root</replaceable> path, including config search
	paths. This is useful to operate on a system image mounted to
	the specified directory instead of the host system itself.
	</para></listitem>
	</varlistentry>

	<varlistentry>
	<term><option>--locale=<replaceable>LOCALE</replaceable></option></term>
	<term><option>--locale-messages=<replaceable>LOCALE</replaceable></option></term>

	<listitem><para>Sets the system locale, more specifically the
	<varname>LANG=</varname> and <varname>LC_MESSAGES</varname>
	settings. The argument should be a valid locale identifier,
	such as <literal>de_DE.UTF-8</literal>. This controls the
	<citerefentry project='man-pages'><refentrytitle>locale.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>
	configuration file.</para></listitem>
	</varlistentry>

	<varlistentry>
	<term><option>--timezone=<replaceable>TIMEZONE</replaceable></option></term>

	<listitem><para>Sets the system time zone. The argument should
	be a valid time zone identifier, such as
	<literal>Europe/Berlin</literal>. This controls the
	<citerefentry><refentrytitle>localtime</refentrytitle><manvolnum>5</manvolnum></citerefentry>
	symlink.</para></listitem>
	</varlistentry>

	<varlistentry>
	<term><option>--hostname=<replaceable>HOSTNAME</replaceable></option></term>

	<listitem><para>Sets the system hostname. The argument should
	be a host name, compatible with DNS. This controls the
	<citerefentry><refentrytitle>hostname</refentrytitle><manvolnum>5</manvolnum></citerefentry>
	configuration file.</para></listitem>
	</varlistentry>

	<varlistentry>
	<term><option>--machine-id=<replaceable>ID</replaceable></option></term>

	<listitem><para>Sets the system's machine ID. This controls
	the
	<citerefentry><refentrytitle>machine-id</refentrytitle><manvolnum>5</manvolnum></citerefentry>
	file.</para></listitem>
	</varlistentry>

	<varlistentry>
	<term><option>--root-password=<replaceable>PASSWORD</replaceable></option></term>
	<term><option>--root-password-file=<replaceable>PATH</replaceable></option></term>

	<listitem><para>Sets the password of the system's root user.
	This creates a
	<citerefentry project='die-net'><refentrytitle>shadow</refentrytitle><manvolnum>5</manvolnum></citerefentry>
	file. This setting exists in two forms:
	<option>--root-password=</option> accepts the password to set
	directly on the command line,
	<option>--root-password-file=</option> reads it from a file.
	Note that it is not recommended specifying passwords on the
	command line as other users might be able to see them simply
	by invoking
	<citerefentry project='die-net'><refentrytitle>ps</refentrytitle><manvolnum>1</manvolnum></citerefentry>.</para></listitem>
	</varlistentry>

	<varlistentry>
	<term><option>--prompt-locale</option></term>
	<term><option>--prompt-timezone</option></term>
	<term><option>--prompt-hostname</option></term>
	<term><option>--prompt-root-password</option></term>

	<listitem><para>Prompt the user interactively for a specific
	basic setting. Note that any explicit configuration settings
	specified on the command line take precedence, and the user is
	not prompted for it.</para></listitem>
	</varlistentry>

	<varlistentry>
	<term><option>--prompt</option></term>

	<listitem><para>Query the user for locale, timezone, hostname
	and root password. This is equivalent to specifying
	<option>--prompt-locale</option>,
	<option>--prompt-timezone</option>,
	<option>--prompt-hostname</option>,
	<option>--prompt-root-password</option> in combination.</para>
	</listitem>
	</varlistentry>

	<varlistentry>
	<term><option>--copy-locale</option></term>
	<term><option>--copy-timezone</option></term>
	<term><option>--copy-root-password</option></term>

	<listitem><para>Copy a specific basic setting from the host.
	This only works in combination with <option>--root=</option>
	(see above).</para></listitem>
	</varlistentry>

	<varlistentry>
	<term><option>--copy</option></term>

	<listitem><para>Copy locale, time zone and root password from
	the host. This is equivalent to specifying
	<option>--copy-locale</option>,
	<option>--copy-timezone</option>,
	<option>--copy-root-password</option> in combination.</para>
	</listitem>
	</varlistentry>

	<varlistentry>
	<term><option>--setup-machine-id</option></term>

	<listitem><para>Initialize the system's machine ID to a random
	ID. This only works in combination with
	<option>--root=</option>.</para></listitem>
	</varlistentry>

	<xi:include href="standard-options.xml" xpointer="help" />
	<xi:include href="standard-options.xml" xpointer="version" />
	</variablelist>

	</refsect1>

	<refsect1>
	<title>Exit status</title>

	<para>On success, 0 is returned, a non-zero failure code
	otherwise.</para>
	</refsect1>

	<refsect1>
	<title>See Also</title>
	<para>
	<citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
	<citerefentry project='man-pages'><refentrytitle>locale.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
	<citerefentry><refentrytitle>localtime</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
	<citerefentry><refentrytitle>hostname</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
	<citerefentry><refentrytitle>machine-id</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
	<citerefentry project='die-net'><refentrytitle>shadow</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
	<citerefentry><refentrytitle>systemd-machine-id-setup</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
	<citerefentry project='man-pages'><refentrytitle>localectl</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
	<citerefentry><refentrytitle>timedatectl</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
	<citerefentry><refentrytitle>hostnamectl</refentrytitle><manvolnum>1</manvolnum></citerefentry>
	</para>
	</refsect1>

	</refentry>