| /*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/ |
| |
| /*** |
| This file is part of systemd. |
| |
| Copyright 2010 Lennart Poettering |
| |
| systemd is free software; you can redistribute it and/or modify it |
| under the terms of the GNU Lesser General Public License as published by |
| the Free Software Foundation; either version 2.1 of the License, or |
| (at your option) any later version. |
| |
| systemd is distributed in the hope that it will be useful, but |
| WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| Lesser General Public License for more details. |
| |
| You should have received a copy of the GNU Lesser General Public License |
| along with systemd; If not, see <http://www.gnu.org/licenses/>. |
| ***/ |
| |
| #include <errno.h> |
| #include <signal.h> |
| #include <unistd.h> |
| |
| #include "async.h" |
| #include "manager.h" |
| #include "unit.h" |
| #include "service.h" |
| #include "load-fragment.h" |
| #include "load-dropin.h" |
| #include "log.h" |
| #include "strv.h" |
| #include "unit-name.h" |
| #include "unit-printf.h" |
| #include "dbus-service.h" |
| #include "special.h" |
| #include "exit-status.h" |
| #include "def.h" |
| #include "path-util.h" |
| #include "util.h" |
| #include "utf8.h" |
| #include "env-util.h" |
| #include "fileio.h" |
| #include "bus-error.h" |
| #include "bus-util.h" |
| #include "bus-kernel.h" |
| #include "formats-util.h" |
| #include "process-util.h" |
| #include "signal-util.h" |
| |
| static const UnitActiveState state_translation_table[_SERVICE_STATE_MAX] = { |
| [SERVICE_DEAD] = UNIT_INACTIVE, |
| [SERVICE_START_PRE] = UNIT_ACTIVATING, |
| [SERVICE_START] = UNIT_ACTIVATING, |
| [SERVICE_START_POST] = UNIT_ACTIVATING, |
| [SERVICE_RUNNING] = UNIT_ACTIVE, |
| [SERVICE_EXITED] = UNIT_ACTIVE, |
| [SERVICE_RELOAD] = UNIT_RELOADING, |
| [SERVICE_STOP] = UNIT_DEACTIVATING, |
| [SERVICE_STOP_SIGABRT] = UNIT_DEACTIVATING, |
| [SERVICE_STOP_SIGTERM] = UNIT_DEACTIVATING, |
| [SERVICE_STOP_SIGKILL] = UNIT_DEACTIVATING, |
| [SERVICE_STOP_POST] = UNIT_DEACTIVATING, |
| [SERVICE_FINAL_SIGTERM] = UNIT_DEACTIVATING, |
| [SERVICE_FINAL_SIGKILL] = UNIT_DEACTIVATING, |
| [SERVICE_FAILED] = UNIT_FAILED, |
| [SERVICE_AUTO_RESTART] = UNIT_ACTIVATING |
| }; |
| |
| /* For Type=idle we never want to delay any other jobs, hence we |
| * consider idle jobs active as soon as we start working on them */ |
| static const UnitActiveState state_translation_table_idle[_SERVICE_STATE_MAX] = { |
| [SERVICE_DEAD] = UNIT_INACTIVE, |
| [SERVICE_START_PRE] = UNIT_ACTIVE, |
| [SERVICE_START] = UNIT_ACTIVE, |
| [SERVICE_START_POST] = UNIT_ACTIVE, |
| [SERVICE_RUNNING] = UNIT_ACTIVE, |
| [SERVICE_EXITED] = UNIT_ACTIVE, |
| [SERVICE_RELOAD] = UNIT_RELOADING, |
| [SERVICE_STOP] = UNIT_DEACTIVATING, |
| [SERVICE_STOP_SIGABRT] = UNIT_DEACTIVATING, |
| [SERVICE_STOP_SIGTERM] = UNIT_DEACTIVATING, |
| [SERVICE_STOP_SIGKILL] = UNIT_DEACTIVATING, |
| [SERVICE_STOP_POST] = UNIT_DEACTIVATING, |
| [SERVICE_FINAL_SIGTERM] = UNIT_DEACTIVATING, |
| [SERVICE_FINAL_SIGKILL] = UNIT_DEACTIVATING, |
| [SERVICE_FAILED] = UNIT_FAILED, |
| [SERVICE_AUTO_RESTART] = UNIT_ACTIVATING |
| }; |
| |
| static int service_dispatch_io(sd_event_source *source, int fd, uint32_t events, void *userdata); |
| static int service_dispatch_timer(sd_event_source *source, usec_t usec, void *userdata); |
| static int service_dispatch_watchdog(sd_event_source *source, usec_t usec, void *userdata); |
| |
| static void service_enter_signal(Service *s, ServiceState state, ServiceResult f); |
| static void service_enter_reload_by_notify(Service *s); |
| |
| static void service_init(Unit *u) { |
| Service *s = SERVICE(u); |
| |
| assert(u); |
| assert(u->load_state == UNIT_STUB); |
| |
| s->timeout_start_usec = u->manager->default_timeout_start_usec; |
| s->timeout_stop_usec = u->manager->default_timeout_stop_usec; |
| s->restart_usec = u->manager->default_restart_usec; |
| s->type = _SERVICE_TYPE_INVALID; |
| s->socket_fd = -1; |
| s->bus_endpoint_fd = -1; |
| s->guess_main_pid = true; |
| |
| RATELIMIT_INIT(s->start_limit, u->manager->default_start_limit_interval, u->manager->default_start_limit_burst); |
| |
| s->control_command_id = _SERVICE_EXEC_COMMAND_INVALID; |
| } |
| |
| static void service_unwatch_control_pid(Service *s) { |
| assert(s); |
| |
| if (s->control_pid <= 0) |
| return; |
| |
| unit_unwatch_pid(UNIT(s), s->control_pid); |
| s->control_pid = 0; |
| } |
| |
| static void service_unwatch_main_pid(Service *s) { |
| assert(s); |
| |
| if (s->main_pid <= 0) |
| return; |
| |
| unit_unwatch_pid(UNIT(s), s->main_pid); |
| s->main_pid = 0; |
| } |
| |
| static void service_unwatch_pid_file(Service *s) { |
| if (!s->pid_file_pathspec) |
| return; |
| |
| log_unit_debug(UNIT(s), "Stopping watch for PID file %s", s->pid_file_pathspec->path); |
| path_spec_unwatch(s->pid_file_pathspec); |
| path_spec_done(s->pid_file_pathspec); |
| free(s->pid_file_pathspec); |
| s->pid_file_pathspec = NULL; |
| } |
| |
| static int service_set_main_pid(Service *s, pid_t pid) { |
| pid_t ppid; |
| |
| assert(s); |
| |
| if (pid <= 1) |
| return -EINVAL; |
| |
| if (pid == getpid()) |
| return -EINVAL; |
| |
| if (s->main_pid == pid && s->main_pid_known) |
| return 0; |
| |
| if (s->main_pid != pid) { |
| service_unwatch_main_pid(s); |
| exec_status_start(&s->main_exec_status, pid); |
| } |
| |
| s->main_pid = pid; |
| s->main_pid_known = true; |
| |
| if (get_parent_of_pid(pid, &ppid) >= 0 && ppid != getpid()) { |
| log_unit_warning(UNIT(s), "Supervising process "PID_FMT" which is not our child. We'll most likely not notice when it exits.", pid); |
| s->main_pid_alien = true; |
| } else |
| s->main_pid_alien = false; |
| |
| return 0; |
| } |
| |
| static void service_close_socket_fd(Service *s) { |
| assert(s); |
| |
| s->socket_fd = asynchronous_close(s->socket_fd); |
| } |
| |
| static void service_connection_unref(Service *s) { |
| assert(s); |
| |
| if (!UNIT_ISSET(s->accept_socket)) |
| return; |
| |
| socket_connection_unref(SOCKET(UNIT_DEREF(s->accept_socket))); |
| unit_ref_unset(&s->accept_socket); |
| } |
| |
| static void service_stop_watchdog(Service *s) { |
| assert(s); |
| |
| s->watchdog_event_source = sd_event_source_unref(s->watchdog_event_source); |
| s->watchdog_timestamp = DUAL_TIMESTAMP_NULL; |
| } |
| |
| static void service_start_watchdog(Service *s) { |
| int r; |
| |
| assert(s); |
| |
| if (s->watchdog_usec <= 0) |
| return; |
| |
| if (s->watchdog_event_source) { |
| r = sd_event_source_set_time(s->watchdog_event_source, s->watchdog_timestamp.monotonic + s->watchdog_usec); |
| if (r < 0) { |
| log_unit_warning_errno(UNIT(s), r, "Failed to reset watchdog timer: %m"); |
| return; |
| } |
| |
| r = sd_event_source_set_enabled(s->watchdog_event_source, SD_EVENT_ONESHOT); |
| } else { |
| r = sd_event_add_time( |
| UNIT(s)->manager->event, |
| &s->watchdog_event_source, |
| CLOCK_MONOTONIC, |
| s->watchdog_timestamp.monotonic + s->watchdog_usec, 0, |
| service_dispatch_watchdog, s); |
| if (r < 0) { |
| log_unit_warning_errno(UNIT(s), r, "Failed to add watchdog timer: %m"); |
| return; |
| } |
| |
| (void) sd_event_source_set_description(s->watchdog_event_source, "service-watchdog"); |
| |
| /* Let's process everything else which might be a sign |
| * of living before we consider a service died. */ |
| r = sd_event_source_set_priority(s->watchdog_event_source, SD_EVENT_PRIORITY_IDLE); |
| } |
| |
| if (r < 0) |
| log_unit_warning_errno(UNIT(s), r, "Failed to install watchdog timer: %m"); |
| } |
| |
| static void service_reset_watchdog(Service *s) { |
| assert(s); |
| |
| dual_timestamp_get(&s->watchdog_timestamp); |
| service_start_watchdog(s); |
| } |
| |
| static void service_fd_store_unlink(ServiceFDStore *fs) { |
| |
| if (!fs) |
| return; |
| |
| if (fs->service) { |
| assert(fs->service->n_fd_store > 0); |
| LIST_REMOVE(fd_store, fs->service->fd_store, fs); |
| fs->service->n_fd_store--; |
| } |
| |
| if (fs->event_source) { |
| sd_event_source_set_enabled(fs->event_source, SD_EVENT_OFF); |
| sd_event_source_unref(fs->event_source); |
| } |
| |
| safe_close(fs->fd); |
| free(fs); |
| } |
| |
| static void service_release_resources(Unit *u) { |
| Service *s = SERVICE(u); |
| |
| assert(s); |
| |
| if (!s->fd_store) |
| return; |
| |
| log_unit_debug(u, "Releasing all resources."); |
| |
| while (s->fd_store) |
| service_fd_store_unlink(s->fd_store); |
| |
| assert(s->n_fd_store == 0); |
| } |
| |
| static void service_done(Unit *u) { |
| Service *s = SERVICE(u); |
| |
| assert(s); |
| |
| free(s->pid_file); |
| s->pid_file = NULL; |
| |
| free(s->status_text); |
| s->status_text = NULL; |
| |
| free(s->reboot_arg); |
| s->reboot_arg = NULL; |
| |
| s->exec_runtime = exec_runtime_unref(s->exec_runtime); |
| exec_command_free_array(s->exec_command, _SERVICE_EXEC_COMMAND_MAX); |
| s->control_command = NULL; |
| s->main_command = NULL; |
| |
| exit_status_set_free(&s->restart_prevent_status); |
| exit_status_set_free(&s->restart_force_status); |
| exit_status_set_free(&s->success_status); |
| |
| /* This will leak a process, but at least no memory or any of |
| * our resources */ |
| service_unwatch_main_pid(s); |
| service_unwatch_control_pid(s); |
| service_unwatch_pid_file(s); |
| |
| if (s->bus_name) { |
| unit_unwatch_bus_name(u, s->bus_name); |
| free(s->bus_name); |
| s->bus_name = NULL; |
| } |
| |
| s->bus_endpoint_fd = safe_close(s->bus_endpoint_fd); |
| service_close_socket_fd(s); |
| service_connection_unref(s); |
| |
| unit_ref_unset(&s->accept_socket); |
| |
| service_stop_watchdog(s); |
| |
| s->timer_event_source = sd_event_source_unref(s->timer_event_source); |
| |
| service_release_resources(u); |
| } |
| |
| static int on_fd_store_io(sd_event_source *e, int fd, uint32_t revents, void *userdata) { |
| ServiceFDStore *fs = userdata; |
| |
| assert(e); |
| assert(fs); |
| |
| /* If we get either EPOLLHUP or EPOLLERR, it's time to remove this entry from the fd store */ |
| service_fd_store_unlink(fs); |
| return 0; |
| } |
| |
| static int service_add_fd_store(Service *s, int fd) { |
| ServiceFDStore *fs; |
| int r; |
| |
| assert(s); |
| assert(fd >= 0); |
| |
| if (s->n_fd_store >= s->n_fd_store_max) |
| return 0; |
| |
| LIST_FOREACH(fd_store, fs, s->fd_store) { |
| r = same_fd(fs->fd, fd); |
| if (r < 0) |
| return r; |
| if (r > 0) { |
| /* Already included */ |
| safe_close(fd); |
| return 1; |
| } |
| } |
| |
| fs = new0(ServiceFDStore, 1); |
| if (!fs) |
| return -ENOMEM; |
| |
| fs->fd = fd; |
| fs->service = s; |
| |
| r = sd_event_add_io(UNIT(s)->manager->event, &fs->event_source, fd, 0, on_fd_store_io, fs); |
| if (r < 0) { |
| free(fs); |
| return r; |
| } |
| |
| (void) sd_event_source_set_description(fs->event_source, "service-fd-store"); |
| |
| LIST_PREPEND(fd_store, s->fd_store, fs); |
| s->n_fd_store++; |
| |
| return 1; |
| } |
| |
| static int service_add_fd_store_set(Service *s, FDSet *fds) { |
| int r; |
| |
| assert(s); |
| |
| if (fdset_size(fds) <= 0) |
| return 0; |
| |
| while (s->n_fd_store < s->n_fd_store_max) { |
| _cleanup_close_ int fd = -1; |
| |
| fd = fdset_steal_first(fds); |
| if (fd < 0) |
| break; |
| |
| r = service_add_fd_store(s, fd); |
| if (r < 0) |
| return log_unit_error_errno(UNIT(s), r, "Couldn't add fd to fd store: %m"); |
| if (r > 0) { |
| log_unit_debug(UNIT(s), "Added fd to fd store."); |
| fd = -1; |
| } |
| } |
| |
| if (fdset_size(fds) > 0) |
| log_unit_warning(UNIT(s), "Tried to store more fds than FDStoreMax=%u allows, closing remaining.", s->n_fd_store_max); |
| |
| return 0; |
| } |
| |
| static int service_arm_timer(Service *s, usec_t usec) { |
| int r; |
| |
| assert(s); |
| |
| if (s->timer_event_source) { |
| r = sd_event_source_set_time(s->timer_event_source, now(CLOCK_MONOTONIC) + usec); |
| if (r < 0) |
| return r; |
| |
| return sd_event_source_set_enabled(s->timer_event_source, SD_EVENT_ONESHOT); |
| } |
| |
| r = sd_event_add_time( |
| UNIT(s)->manager->event, |
| &s->timer_event_source, |
| CLOCK_MONOTONIC, |
| now(CLOCK_MONOTONIC) + usec, 0, |
| service_dispatch_timer, s); |
| if (r < 0) |
| return r; |
| |
| (void) sd_event_source_set_description(s->timer_event_source, "service-timer"); |
| |
| return 0; |
| } |
| |
| static int service_verify(Service *s) { |
| assert(s); |
| |
| if (UNIT(s)->load_state != UNIT_LOADED) |
| return 0; |
| |
| if (!s->exec_command[SERVICE_EXEC_START] && !s->exec_command[SERVICE_EXEC_STOP]) { |
| log_unit_error(UNIT(s), "Service lacks both ExecStart= and ExecStop= setting. Refusing."); |
| return -EINVAL; |
| } |
| |
| if (s->type != SERVICE_ONESHOT && !s->exec_command[SERVICE_EXEC_START]) { |
| log_unit_error(UNIT(s), "Service has no ExecStart= setting, which is only allowed for Type=oneshot services. Refusing."); |
| return -EINVAL; |
| } |
| |
| if (!s->remain_after_exit && !s->exec_command[SERVICE_EXEC_START]) { |
| log_unit_error(UNIT(s), "Service has no ExecStart= setting, which is only allowed for RemainAfterExit=yes services. Refusing."); |
| return -EINVAL; |
| } |
| |
| if (s->type != SERVICE_ONESHOT && s->exec_command[SERVICE_EXEC_START]->command_next) { |
| log_unit_error(UNIT(s), "Service has more than one ExecStart= setting, which is only allowed for Type=oneshot services. Refusing."); |
| return -EINVAL; |
| } |
| |
| if (s->type == SERVICE_ONESHOT && s->restart != SERVICE_RESTART_NO) { |
| log_unit_error(UNIT(s), "Service has Restart= setting other than no, which isn't allowed for Type=oneshot services. Refusing."); |
| return -EINVAL; |
| } |
| |
| if (s->type == SERVICE_ONESHOT && !exit_status_set_is_empty(&s->restart_force_status)) { |
| log_unit_error(UNIT(s), "Service has RestartForceStatus= set, which isn't allowed for Type=oneshot services. Refusing."); |
| return -EINVAL; |
| } |
| |
| if (s->type == SERVICE_DBUS && !s->bus_name) { |
| log_unit_error(UNIT(s), "Service is of type D-Bus but no D-Bus service name has been specified. Refusing."); |
| return -EINVAL; |
| } |
| |
| if (s->bus_name && s->type != SERVICE_DBUS) |
| log_unit_warning(UNIT(s), "Service has a D-Bus service name specified, but is not of type dbus. Ignoring."); |
| |
| if (s->exec_context.pam_name && !(s->kill_context.kill_mode == KILL_CONTROL_GROUP || s->kill_context.kill_mode == KILL_MIXED)) { |
| log_unit_error(UNIT(s), "Service has PAM enabled. Kill mode must be set to 'control-group' or 'mixed'. Refusing."); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int service_add_default_dependencies(Service *s) { |
| int r; |
| |
| assert(s); |
| |
| /* Add a number of automatic dependencies useful for the |
| * majority of services. */ |
| |
| /* First, pull in base system */ |
| r = unit_add_two_dependencies_by_name(UNIT(s), UNIT_AFTER, UNIT_REQUIRES, SPECIAL_BASIC_TARGET, NULL, true); |
| if (r < 0) |
| return r; |
| |
| /* Second, activate normal shutdown */ |
| return unit_add_two_dependencies_by_name(UNIT(s), UNIT_BEFORE, UNIT_CONFLICTS, SPECIAL_SHUTDOWN_TARGET, NULL, true); |
| } |
| |
| static void service_fix_output(Service *s) { |
| assert(s); |
| |
| /* If nothing has been explicitly configured, patch default |
| * output in. If input is socket/tty we avoid this however, |
| * since in that case we want output to default to the same |
| * place as we read input from. */ |
| |
| if (s->exec_context.std_error == EXEC_OUTPUT_INHERIT && |
| s->exec_context.std_output == EXEC_OUTPUT_INHERIT && |
| s->exec_context.std_input == EXEC_INPUT_NULL) |
| s->exec_context.std_error = UNIT(s)->manager->default_std_error; |
| |
| if (s->exec_context.std_output == EXEC_OUTPUT_INHERIT && |
| s->exec_context.std_input == EXEC_INPUT_NULL) |
| s->exec_context.std_output = UNIT(s)->manager->default_std_output; |
| } |
| |
| static int service_add_extras(Service *s) { |
| int r; |
| |
| assert(s); |
| |
| if (s->type == _SERVICE_TYPE_INVALID) { |
| /* Figure out a type automatically */ |
| if (s->bus_name) |
| s->type = SERVICE_DBUS; |
| else if (s->exec_command[SERVICE_EXEC_START]) |
| s->type = SERVICE_SIMPLE; |
| else |
| s->type = SERVICE_ONESHOT; |
| } |
| |
| /* Oneshot services have disabled start timeout by default */ |
| if (s->type == SERVICE_ONESHOT && !s->start_timeout_defined) |
| s->timeout_start_usec = 0; |
| |
| service_fix_output(s); |
| |
| r = unit_patch_contexts(UNIT(s)); |
| if (r < 0) |
| return r; |
| |
| r = unit_add_exec_dependencies(UNIT(s), &s->exec_context); |
| if (r < 0) |
| return r; |
| |
| r = unit_add_default_slice(UNIT(s), &s->cgroup_context); |
| if (r < 0) |
| return r; |
| |
| if (s->type == SERVICE_NOTIFY && s->notify_access == NOTIFY_NONE) |
| s->notify_access = NOTIFY_MAIN; |
| |
| if (s->watchdog_usec > 0 && s->notify_access == NOTIFY_NONE) |
| s->notify_access = NOTIFY_MAIN; |
| |
| if (s->bus_name) { |
| const char *n; |
| |
| n = strjoina(s->bus_name, ".busname"); |
| r = unit_add_dependency_by_name(UNIT(s), UNIT_AFTER, n, NULL, true); |
| if (r < 0) |
| return r; |
| |
| r = unit_watch_bus_name(UNIT(s), s->bus_name); |
| if (r == -EEXIST) |
| return log_unit_error_errno(UNIT(s), r, "Two services allocated for the same bus name %s, refusing operation.", s->bus_name); |
| if (r < 0) |
| return log_unit_error_errno(UNIT(s), r, "Cannot watch bus name %s: %m", s->bus_name); |
| } |
| |
| if (UNIT(s)->default_dependencies) { |
| r = service_add_default_dependencies(s); |
| if (r < 0) |
| return r; |
| } |
| |
| return 0; |
| } |
| |
| static int service_load(Unit *u) { |
| Service *s = SERVICE(u); |
| int r; |
| |
| assert(s); |
| |
| /* Load a .service file */ |
| r = unit_load_fragment(u); |
| if (r < 0) |
| return r; |
| |
| /* Still nothing found? Then let's give up */ |
| if (u->load_state == UNIT_STUB) |
| return -ENOENT; |
| |
| /* This is a new unit? Then let's add in some extras */ |
| if (u->load_state == UNIT_LOADED) { |
| |
| /* We were able to load something, then let's add in |
| * the dropin directories. */ |
| r = unit_load_dropin(u); |
| if (r < 0) |
| return r; |
| |
| /* This is a new unit? Then let's add in some |
| * extras */ |
| r = service_add_extras(s); |
| if (r < 0) |
| return r; |
| } |
| |
| return service_verify(s); |
| } |
| |
| static void service_dump(Unit *u, FILE *f, const char *prefix) { |
| ServiceExecCommand c; |
| Service *s = SERVICE(u); |
| const char *prefix2; |
| |
| assert(s); |
| |
| prefix = strempty(prefix); |
| prefix2 = strjoina(prefix, "\t"); |
| |
| fprintf(f, |
| "%sService State: %s\n" |
| "%sResult: %s\n" |
| "%sReload Result: %s\n" |
| "%sPermissionsStartOnly: %s\n" |
| "%sRootDirectoryStartOnly: %s\n" |
| "%sRemainAfterExit: %s\n" |
| "%sGuessMainPID: %s\n" |
| "%sType: %s\n" |
| "%sRestart: %s\n" |
| "%sNotifyAccess: %s\n" |
| "%sNotifyState: %s\n", |
| prefix, service_state_to_string(s->state), |
| prefix, service_result_to_string(s->result), |
| prefix, service_result_to_string(s->reload_result), |
| prefix, yes_no(s->permissions_start_only), |
| prefix, yes_no(s->root_directory_start_only), |
| prefix, yes_no(s->remain_after_exit), |
| prefix, yes_no(s->guess_main_pid), |
| prefix, service_type_to_string(s->type), |
| prefix, service_restart_to_string(s->restart), |
| prefix, notify_access_to_string(s->notify_access), |
| prefix, notify_state_to_string(s->notify_state)); |
| |
| if (s->control_pid > 0) |
| fprintf(f, |
| "%sControl PID: "PID_FMT"\n", |
| prefix, s->control_pid); |
| |
| if (s->main_pid > 0) |
| fprintf(f, |
| "%sMain PID: "PID_FMT"\n" |
| "%sMain PID Known: %s\n" |
| "%sMain PID Alien: %s\n", |
| prefix, s->main_pid, |
| prefix, yes_no(s->main_pid_known), |
| prefix, yes_no(s->main_pid_alien)); |
| |
| if (s->pid_file) |
| fprintf(f, |
| "%sPIDFile: %s\n", |
| prefix, s->pid_file); |
| |
| if (s->bus_name) |
| fprintf(f, |
| "%sBusName: %s\n" |
| "%sBus Name Good: %s\n", |
| prefix, s->bus_name, |
| prefix, yes_no(s->bus_name_good)); |
| |
| kill_context_dump(&s->kill_context, f, prefix); |
| exec_context_dump(&s->exec_context, f, prefix); |
| |
| for (c = 0; c < _SERVICE_EXEC_COMMAND_MAX; c++) { |
| |
| if (!s->exec_command[c]) |
| continue; |
| |
| fprintf(f, "%s-> %s:\n", |
| prefix, service_exec_command_to_string(c)); |
| |
| exec_command_dump_list(s->exec_command[c], f, prefix2); |
| } |
| |
| if (s->status_text) |
| fprintf(f, "%sStatus Text: %s\n", |
| prefix, s->status_text); |
| |
| if (s->n_fd_store_max > 0) { |
| fprintf(f, |
| "%sFile Descriptor Store Max: %u\n" |
| "%sFile Descriptor Store Current: %u\n", |
| prefix, s->n_fd_store_max, |
| prefix, s->n_fd_store); |
| } |
| } |
| |
| static int service_load_pid_file(Service *s, bool may_warn) { |
| _cleanup_free_ char *k = NULL; |
| int r; |
| pid_t pid; |
| |
| assert(s); |
| |
| if (!s->pid_file) |
| return -ENOENT; |
| |
| r = read_one_line_file(s->pid_file, &k); |
| if (r < 0) { |
| if (may_warn) |
| log_unit_info_errno(UNIT(s), r, "PID file %s not readable (yet?) after %s: %m", s->pid_file, service_state_to_string(s->state)); |
| return r; |
| } |
| |
| r = parse_pid(k, &pid); |
| if (r < 0) { |
| if (may_warn) |
| log_unit_info_errno(UNIT(s), r, "Failed to read PID from file %s: %m", s->pid_file); |
| return r; |
| } |
| |
| if (!pid_is_alive(pid)) { |
| if (may_warn) |
| log_unit_info(UNIT(s), "PID "PID_FMT" read from file %s does not exist or is a zombie.", pid, s->pid_file); |
| return -ESRCH; |
| } |
| |
| if (s->main_pid_known) { |
| if (pid == s->main_pid) |
| return 0; |
| |
| log_unit_debug(UNIT(s), "Main PID changing: "PID_FMT" -> "PID_FMT, s->main_pid, pid); |
| |
| service_unwatch_main_pid(s); |
| s->main_pid_known = false; |
| } else |
| log_unit_debug(UNIT(s), "Main PID loaded: "PID_FMT, pid); |
| |
| r = service_set_main_pid(s, pid); |
| if (r < 0) |
| return r; |
| |
| r = unit_watch_pid(UNIT(s), pid); |
| if (r < 0) { |
| /* FIXME: we need to do something here */ |
| log_unit_warning_errno(UNIT(s), r, "Failed to watch PID "PID_FMT" for service: %m", pid); |
| return r; |
| } |
| |
| return 0; |
| } |
| |
| static int service_search_main_pid(Service *s) { |
| pid_t pid; |
| int r; |
| |
| assert(s); |
| |
| /* If we know it anyway, don't ever fallback to unreliable |
| * heuristics */ |
| if (s->main_pid_known) |
| return 0; |
| |
| if (!s->guess_main_pid) |
| return 0; |
| |
| assert(s->main_pid <= 0); |
| |
| pid = unit_search_main_pid(UNIT(s)); |
| if (pid <= 0) |
| return -ENOENT; |
| |
| log_unit_debug(UNIT(s), "Main PID guessed: "PID_FMT, pid); |
| r = service_set_main_pid(s, pid); |
| if (r < 0) |
| return r; |
| |
| r = unit_watch_pid(UNIT(s), pid); |
| if (r < 0) { |
| /* FIXME: we need to do something here */ |
| log_unit_warning_errno(UNIT(s), r, "Failed to watch PID "PID_FMT" from: %m", pid); |
| return r; |
| } |
| |
| return 0; |
| } |
| |
| static void service_set_state(Service *s, ServiceState state) { |
| ServiceState old_state; |
| const UnitActiveState *table; |
| |
| assert(s); |
| |
| table = s->type == SERVICE_IDLE ? state_translation_table_idle : state_translation_table; |
| |
| old_state = s->state; |
| s->state = state; |
| |
| service_unwatch_pid_file(s); |
| |
| if (!IN_SET(state, |
| SERVICE_START_PRE, SERVICE_START, SERVICE_START_POST, |
| SERVICE_RELOAD, |
| SERVICE_STOP, SERVICE_STOP_SIGABRT, SERVICE_STOP_SIGTERM, SERVICE_STOP_SIGKILL, SERVICE_STOP_POST, |
| SERVICE_FINAL_SIGTERM, SERVICE_FINAL_SIGKILL, |
| SERVICE_AUTO_RESTART)) |
| s->timer_event_source = sd_event_source_unref(s->timer_event_source); |
| |
| if (!IN_SET(state, |
| SERVICE_START, SERVICE_START_POST, |
| SERVICE_RUNNING, SERVICE_RELOAD, |
| SERVICE_STOP, SERVICE_STOP_SIGABRT, SERVICE_STOP_SIGTERM, SERVICE_STOP_SIGKILL, SERVICE_STOP_POST, |
| SERVICE_FINAL_SIGTERM, SERVICE_FINAL_SIGKILL)) { |
| service_unwatch_main_pid(s); |
| s->main_command = NULL; |
| } |
| |
| if (!IN_SET(state, |
| SERVICE_START_PRE, SERVICE_START, SERVICE_START_POST, |
| SERVICE_RELOAD, |
| SERVICE_STOP, SERVICE_STOP_SIGABRT, SERVICE_STOP_SIGTERM, SERVICE_STOP_SIGKILL, SERVICE_STOP_POST, |
| SERVICE_FINAL_SIGTERM, SERVICE_FINAL_SIGKILL)) { |
| service_unwatch_control_pid(s); |
| s->control_command = NULL; |
| s->control_command_id = _SERVICE_EXEC_COMMAND_INVALID; |
| } |
| |
| if (IN_SET(state, SERVICE_DEAD, SERVICE_FAILED, SERVICE_AUTO_RESTART)) |
| unit_unwatch_all_pids(UNIT(s)); |
| |
| if (!IN_SET(state, |
| SERVICE_START_PRE, SERVICE_START, SERVICE_START_POST, |
| SERVICE_RUNNING, SERVICE_RELOAD, |
| SERVICE_STOP, SERVICE_STOP_SIGABRT, SERVICE_STOP_SIGTERM, SERVICE_STOP_SIGKILL, SERVICE_STOP_POST, |
| SERVICE_FINAL_SIGTERM, SERVICE_FINAL_SIGKILL) && |
| !(state == SERVICE_DEAD && UNIT(s)->job)) { |
| service_close_socket_fd(s); |
| service_connection_unref(s); |
| } |
| |
| if (!IN_SET(state, SERVICE_START_POST, SERVICE_RUNNING, SERVICE_RELOAD)) |
| service_stop_watchdog(s); |
| |
| /* For the inactive states unit_notify() will trim the cgroup, |
| * but for exit we have to do that ourselves... */ |
| if (state == SERVICE_EXITED && UNIT(s)->manager->n_reloading <= 0) |
| unit_destroy_cgroup_if_empty(UNIT(s)); |
| |
| /* For remain_after_exit services, let's see if we can "release" the |
| * hold on the console, since unit_notify() only does that in case of |
| * change of state */ |
| if (state == SERVICE_EXITED && |
| s->remain_after_exit && |
| UNIT(s)->manager->n_on_console > 0) { |
| |
| ExecContext *ec; |
| |
| ec = unit_get_exec_context(UNIT(s)); |
| if (ec && exec_context_may_touch_console(ec)) { |
| Manager *m = UNIT(s)->manager; |
| |
| m->n_on_console --; |
| if (m->n_on_console == 0) |
| /* unset no_console_output flag, since the console is free */ |
| m->no_console_output = false; |
| } |
| } |
| |
| if (old_state != state) |
| log_unit_debug(UNIT(s), "Changed %s -> %s", service_state_to_string(old_state), service_state_to_string(state)); |
| |
| unit_notify(UNIT(s), table[old_state], table[state], s->reload_result == SERVICE_SUCCESS); |
| s->reload_result = SERVICE_SUCCESS; |
| } |
| |
| static int service_coldplug(Unit *u) { |
| Service *s = SERVICE(u); |
| int r; |
| |
| assert(s); |
| assert(s->state == SERVICE_DEAD); |
| |
| if (s->deserialized_state != s->state) { |
| |
| if (IN_SET(s->deserialized_state, |
| SERVICE_START_PRE, SERVICE_START, SERVICE_START_POST, |
| SERVICE_RELOAD, |
| SERVICE_STOP, SERVICE_STOP_SIGABRT, SERVICE_STOP_SIGTERM, SERVICE_STOP_SIGKILL, SERVICE_STOP_POST, |
| SERVICE_FINAL_SIGTERM, SERVICE_FINAL_SIGKILL)) { |
| |
| usec_t k; |
| |
| k = IN_SET(s->deserialized_state, SERVICE_START_PRE, SERVICE_START, SERVICE_START_POST, SERVICE_RELOAD) ? s->timeout_start_usec : s->timeout_stop_usec; |
| |
| /* For the start/stop timeouts 0 means off */ |
| if (k > 0) { |
| r = service_arm_timer(s, k); |
| if (r < 0) |
| return r; |
| } |
| } |
| |
| if (s->deserialized_state == SERVICE_AUTO_RESTART) { |
| |
| /* The restart timeouts 0 means immediately */ |
| r = service_arm_timer(s, s->restart_usec); |
| if (r < 0) |
| return r; |
| } |
| |
| if (pid_is_unwaited(s->main_pid) && |
| ((s->deserialized_state == SERVICE_START && IN_SET(s->type, SERVICE_FORKING, SERVICE_DBUS, SERVICE_ONESHOT, SERVICE_NOTIFY)) || |
| IN_SET(s->deserialized_state, |
| SERVICE_START, SERVICE_START_POST, |
| SERVICE_RUNNING, SERVICE_RELOAD, |
| SERVICE_STOP, SERVICE_STOP_SIGABRT, SERVICE_STOP_SIGTERM, SERVICE_STOP_SIGKILL, SERVICE_STOP_POST, |
| SERVICE_FINAL_SIGTERM, SERVICE_FINAL_SIGKILL))) { |
| r = unit_watch_pid(UNIT(s), s->main_pid); |
| if (r < 0) |
| return r; |
| } |
| |
| if (pid_is_unwaited(s->control_pid) && |
| IN_SET(s->deserialized_state, |
| SERVICE_START_PRE, SERVICE_START, SERVICE_START_POST, |
| SERVICE_RELOAD, |
| SERVICE_STOP, SERVICE_STOP_SIGABRT, SERVICE_STOP_SIGTERM, SERVICE_STOP_SIGKILL, SERVICE_STOP_POST, |
| SERVICE_FINAL_SIGTERM, SERVICE_FINAL_SIGKILL)) { |
| r = unit_watch_pid(UNIT(s), s->control_pid); |
| if (r < 0) |
| return r; |
| } |
| |
| if (!IN_SET(s->deserialized_state, SERVICE_DEAD, SERVICE_FAILED, SERVICE_AUTO_RESTART)) |
| unit_watch_all_pids(UNIT(s)); |
| |
| if (IN_SET(s->deserialized_state, SERVICE_START_POST, SERVICE_RUNNING, SERVICE_RELOAD)) |
| service_start_watchdog(s); |
| |
| service_set_state(s, s->deserialized_state); |
| } |
| |
| return 0; |
| } |
| |
| static int service_collect_fds(Service *s, int **fds, unsigned *n_fds) { |
| _cleanup_free_ int *rfds = NULL; |
| unsigned rn_fds = 0; |
| Iterator i; |
| int r; |
| Unit *u; |
| |
| assert(s); |
| assert(fds); |
| assert(n_fds); |
| |
| if (s->socket_fd >= 0) |
| return 0; |
| |
| SET_FOREACH(u, UNIT(s)->dependencies[UNIT_TRIGGERED_BY], i) { |
| int *cfds; |
| unsigned cn_fds; |
| Socket *sock; |
| |
| if (u->type != UNIT_SOCKET) |
| continue; |
| |
| sock = SOCKET(u); |
| |
| r = socket_collect_fds(sock, &cfds, &cn_fds); |
| if (r < 0) |
| return r; |
| |
| if (cn_fds <= 0) { |
| free(cfds); |
| continue; |
| } |
| |
| if (!rfds) { |
| rfds = cfds; |
| rn_fds = cn_fds; |
| } else { |
| int *t; |
| |
| t = realloc(rfds, (rn_fds + cn_fds) * sizeof(int)); |
| if (!t) { |
| free(cfds); |
| return -ENOMEM; |
| } |
| |
| memcpy(t + rn_fds, cfds, cn_fds * sizeof(int)); |
| rfds = t; |
| rn_fds += cn_fds; |
| |
| free(cfds); |
| |
| } |
| } |
| |
| if (s->n_fd_store > 0) { |
| ServiceFDStore *fs; |
| int *t; |
| |
| t = realloc(rfds, (rn_fds + s->n_fd_store) * sizeof(int)); |
| if (!t) |
| return -ENOMEM; |
| |
| rfds = t; |
| LIST_FOREACH(fd_store, fs, s->fd_store) |
| rfds[rn_fds++] = fs->fd; |
| } |
| |
| *fds = rfds; |
| *n_fds = rn_fds; |
| |
| rfds = NULL; |
| return 0; |
| } |
| |
| static int service_spawn( |
| Service *s, |
| ExecCommand *c, |
| usec_t timeout, |
| bool pass_fds, |
| bool apply_permissions, |
| bool apply_chroot, |
| bool apply_tty_stdin, |
| bool is_control, |
| pid_t *_pid) { |
| |
| pid_t pid; |
| int r; |
| int *fds = NULL; |
| _cleanup_free_ int *fdsbuf = NULL; |
| unsigned n_fds = 0, n_env = 0; |
| _cleanup_free_ char *bus_endpoint_path = NULL; |
| _cleanup_strv_free_ char |
| **argv = NULL, **final_env = NULL, **our_env = NULL; |
| const char *path; |
| ExecParameters exec_params = { |
| .apply_permissions = apply_permissions, |
| .apply_chroot = apply_chroot, |
| .apply_tty_stdin = apply_tty_stdin, |
| .bus_endpoint_fd = -1, |
| .selinux_context_net = s->socket_fd_selinux_context_net |
| }; |
| |
| assert(s); |
| assert(c); |
| assert(_pid); |
| |
| (void) unit_realize_cgroup(UNIT(s)); |
| if (s->reset_cpu_usage) { |
| (void) unit_reset_cpu_usage(UNIT(s)); |
| s->reset_cpu_usage = false; |
| } |
| |
| r = unit_setup_exec_runtime(UNIT(s)); |
| if (r < 0) |
| goto fail; |
| |
| if (pass_fds || |
| s->exec_context.std_input == EXEC_INPUT_SOCKET || |
| s->exec_context.std_output == EXEC_OUTPUT_SOCKET || |
| s->exec_context.std_error == EXEC_OUTPUT_SOCKET) { |
| |
| if (s->socket_fd >= 0) { |
| fds = &s->socket_fd; |
| n_fds = 1; |
| } else { |
| r = service_collect_fds(s, &fdsbuf, &n_fds); |
| if (r < 0) |
| goto fail; |
| |
| fds = fdsbuf; |
| } |
| } |
| |
| if (timeout > 0) { |
| r = service_arm_timer(s, timeout); |
| if (r < 0) |
| goto fail; |
| } else |
| s->timer_event_source = sd_event_source_unref(s->timer_event_source); |
| |
| r = unit_full_printf_strv(UNIT(s), c->argv, &argv); |
| if (r < 0) |
| goto fail; |
| |
| our_env = new0(char*, 6); |
| if (!our_env) { |
| r = -ENOMEM; |
| goto fail; |
| } |
| |
| if (is_control ? s->notify_access == NOTIFY_ALL : s->notify_access != NOTIFY_NONE) |
| if (asprintf(our_env + n_env++, "NOTIFY_SOCKET=%s", UNIT(s)->manager->notify_socket) < 0) { |
| r = -ENOMEM; |
| goto fail; |
| } |
| |
| if (s->main_pid > 0) |
| if (asprintf(our_env + n_env++, "MAINPID="PID_FMT, s->main_pid) < 0) { |
| r = -ENOMEM; |
| goto fail; |
| } |
| |
| if (UNIT(s)->manager->running_as != MANAGER_SYSTEM) |
| if (asprintf(our_env + n_env++, "MANAGERPID="PID_FMT, getpid()) < 0) { |
| r = -ENOMEM; |
| goto fail; |
| } |
| |
| if (UNIT_DEREF(s->accept_socket)) { |
| union sockaddr_union sa; |
| socklen_t salen = sizeof(sa); |
| |
| r = getpeername(s->socket_fd, &sa.sa, &salen); |
| if (r < 0) { |
| r = -errno; |
| goto fail; |
| } |
| |
| if (IN_SET(sa.sa.sa_family, AF_INET, AF_INET6)) { |
| _cleanup_free_ char *addr = NULL; |
| char *t; |
| int port; |
| |
| r = sockaddr_pretty(&sa.sa, salen, true, false, &addr); |
| if (r < 0) |
| goto fail; |
| |
| t = strappend("REMOTE_ADDR=", addr); |
| if (!t) { |
| r = -ENOMEM; |
| goto fail; |
| } |
| our_env[n_env++] = t; |
| |
| port = sockaddr_port(&sa.sa); |
| if (port < 0) { |
| r = port; |
| goto fail; |
| } |
| |
| if (asprintf(&t, "REMOTE_PORT=%u", port) < 0) { |
| r = -ENOMEM; |
| goto fail; |
| } |
| our_env[n_env++] = t; |
| } |
| } |
| |
| final_env = strv_env_merge(2, UNIT(s)->manager->environment, our_env, NULL); |
| if (!final_env) { |
| r = -ENOMEM; |
| goto fail; |
| } |
| |
| if (is_control && UNIT(s)->cgroup_path) { |
| path = strjoina(UNIT(s)->cgroup_path, "/control"); |
| cg_create(SYSTEMD_CGROUP_CONTROLLER, path); |
| } else |
| path = UNIT(s)->cgroup_path; |
| |
| if (s->exec_context.bus_endpoint) { |
| r = bus_kernel_create_endpoint(UNIT(s)->manager->running_as == MANAGER_SYSTEM ? "system" : "user", |
| UNIT(s)->id, &bus_endpoint_path); |
| if (r < 0) |
| goto fail; |
| |
| /* Pass the fd to the exec_params so that the child process can upload the policy. |
| * Keep a reference to the fd in the service, so the endpoint is kept alive as long |
| * as the service is running. */ |
| exec_params.bus_endpoint_fd = s->bus_endpoint_fd = r; |
| } |
| |
| exec_params.argv = argv; |
| exec_params.fds = fds; |
| exec_params.n_fds = n_fds; |
| exec_params.environment = final_env; |
| exec_params.confirm_spawn = UNIT(s)->manager->confirm_spawn; |
| exec_params.cgroup_supported = UNIT(s)->manager->cgroup_supported; |
| exec_params.cgroup_path = path; |
| exec_params.cgroup_delegate = s->cgroup_context.delegate; |
| exec_params.runtime_prefix = manager_get_runtime_prefix(UNIT(s)->manager); |
| exec_params.watchdog_usec = s->watchdog_usec; |
| exec_params.bus_endpoint_path = bus_endpoint_path; |
| if (s->type == SERVICE_IDLE) |
| exec_params.idle_pipe = UNIT(s)->manager->idle_pipe; |
| |
| r = exec_spawn(UNIT(s), |
| c, |
| &s->exec_context, |
| &exec_params, |
| s->exec_runtime, |
| &pid); |
| if (r < 0) |
| goto fail; |
| |
| r = unit_watch_pid(UNIT(s), pid); |
| if (r < 0) |
| /* FIXME: we need to do something here */ |
| goto fail; |
| |
| *_pid = pid; |
| |
| return 0; |
| |
| fail: |
| if (timeout) |
| s->timer_event_source = sd_event_source_unref(s->timer_event_source); |
| |
| return r; |
| } |
| |
| static int main_pid_good(Service *s) { |
| assert(s); |
| |
| /* Returns 0 if the pid is dead, 1 if it is good, -1 if we |
| * don't know */ |
| |
| /* If we know the pid file, then let's just check if it is |
| * still valid */ |
| if (s->main_pid_known) { |
| |
| /* If it's an alien child let's check if it is still |
| * alive ... */ |
| if (s->main_pid_alien && s->main_pid > 0) |
| return pid_is_alive(s->main_pid); |
| |
| /* .. otherwise assume we'll get a SIGCHLD for it, |
| * which we really should wait for to collect exit |
| * status and code */ |
| return s->main_pid > 0; |
| } |
| |
| /* We don't know the pid */ |
| return -EAGAIN; |
| } |
| |
| _pure_ static int control_pid_good(Service *s) { |
| assert(s); |
| |
| return s->control_pid > 0; |
| } |
| |
| static int cgroup_good(Service *s) { |
| int r; |
| |
| assert(s); |
| |
| if (!UNIT(s)->cgroup_path) |
| return 0; |
| |
| r = cg_is_empty_recursive(SYSTEMD_CGROUP_CONTROLLER, UNIT(s)->cgroup_path, true); |
| if (r < 0) |
| return r; |
| |
| return !r; |
| } |
| |
| static bool service_shall_restart(Service *s) { |
| assert(s); |
| |
| /* Don't restart after manual stops */ |
| if (s->forbid_restart) |
| return false; |
| |
| /* Never restart if this is configured as special exception */ |
| if (exit_status_set_test(&s->restart_prevent_status, s->main_exec_status.code, s->main_exec_status.status)) |
| return false; |
| |
| /* Restart if the exit code/status are configured as restart triggers */ |
| if (exit_status_set_test(&s->restart_force_status, s->main_exec_status.code, s->main_exec_status.status)) |
| return true; |
| |
| switch (s->restart) { |
| |
| case SERVICE_RESTART_NO: |
| return false; |
| |
| case SERVICE_RESTART_ALWAYS: |
| return true; |
| |
| case SERVICE_RESTART_ON_SUCCESS: |
| return s->result == SERVICE_SUCCESS; |
| |
| case SERVICE_RESTART_ON_FAILURE: |
| return s->result != SERVICE_SUCCESS; |
| |
| case SERVICE_RESTART_ON_ABNORMAL: |
| return !IN_SET(s->result, SERVICE_SUCCESS, SERVICE_FAILURE_EXIT_CODE); |
| |
| case SERVICE_RESTART_ON_WATCHDOG: |
| return s->result == SERVICE_FAILURE_WATCHDOG; |
| |
| case SERVICE_RESTART_ON_ABORT: |
| return IN_SET(s->result, SERVICE_FAILURE_SIGNAL, SERVICE_FAILURE_CORE_DUMP); |
| |
| default: |
| assert_not_reached("unknown restart setting"); |
| } |
| } |
| |
| static void service_enter_dead(Service *s, ServiceResult f, bool allow_restart) { |
| int r; |
| assert(s); |
| |
| if (f != SERVICE_SUCCESS) |
| s->result = f; |
| |
| service_set_state(s, s->result != SERVICE_SUCCESS ? SERVICE_FAILED : SERVICE_DEAD); |
| |
| if (s->result != SERVICE_SUCCESS) { |
| log_unit_warning(UNIT(s), "Failed with result '%s'.", service_result_to_string(s->result)); |
| failure_action(UNIT(s)->manager, s->failure_action, s->reboot_arg); |
| } |
| |
| if (allow_restart && service_shall_restart(s)) { |
| |
| r = service_arm_timer(s, s->restart_usec); |
| if (r < 0) |
| goto fail; |
| |
| service_set_state(s, SERVICE_AUTO_RESTART); |
| } |
| |
| /* The next restart might not be a manual stop, hence reset the flag indicating manual stops */ |
| s->forbid_restart = false; |
| |
| /* We want fresh tmpdirs in case service is started again immediately */ |
| exec_runtime_destroy(s->exec_runtime); |
| s->exec_runtime = exec_runtime_unref(s->exec_runtime); |
| |
| /* Also, remove the runtime directory in */ |
| exec_context_destroy_runtime_directory(&s->exec_context, manager_get_runtime_prefix(UNIT(s)->manager)); |
| |
| /* Try to delete the pid file. At this point it will be |
| * out-of-date, and some software might be confused by it, so |
| * let's remove it. */ |
| if (s->pid_file) |
| unlink_noerrno(s->pid_file); |
| |
| return; |
| |
| fail: |
| log_unit_warning_errno(UNIT(s), r, "Failed to run install restart timer: %m"); |
| service_enter_dead(s, SERVICE_FAILURE_RESOURCES, false); |
| } |
| |
| static void service_enter_stop_post(Service *s, ServiceResult f) { |
| int r; |
| assert(s); |
| |
| if (f != SERVICE_SUCCESS) |
| s->result = f; |
| |
| service_unwatch_control_pid(s); |
| unit_watch_all_pids(UNIT(s)); |
| |
| s->control_command = s->exec_command[SERVICE_EXEC_STOP_POST]; |
| if (s->control_command) { |
| s->control_command_id = SERVICE_EXEC_STOP_POST; |
| |
| r = service_spawn(s, |
| s->control_command, |
| s->timeout_stop_usec, |
| false, |
| !s->permissions_start_only, |
| !s->root_directory_start_only, |
| true, |
| true, |
| &s->control_pid); |
| if (r < 0) |
| goto fail; |
| |
| service_set_state(s, SERVICE_STOP_POST); |
| } else |
| service_enter_signal(s, SERVICE_FINAL_SIGTERM, SERVICE_SUCCESS); |
| |
| return; |
| |
| fail: |
| log_unit_warning_errno(UNIT(s), r, "Failed to run 'stop-post' task: %m"); |
| service_enter_signal(s, SERVICE_FINAL_SIGTERM, SERVICE_FAILURE_RESOURCES); |
| } |
| |
| static int state_to_kill_operation(ServiceState state) { |
| switch (state) { |
| |
| case SERVICE_STOP_SIGABRT: |
| return KILL_ABORT; |
| |
| case SERVICE_STOP_SIGTERM: |
| case SERVICE_FINAL_SIGTERM: |
| return KILL_TERMINATE; |
| |
| case SERVICE_STOP_SIGKILL: |
| case SERVICE_FINAL_SIGKILL: |
| return KILL_KILL; |
| |
| default: |
| return _KILL_OPERATION_INVALID; |
| } |
| } |
| |
| static void service_enter_signal(Service *s, ServiceState state, ServiceResult f) { |
| int r; |
| |
| assert(s); |
| |
| if (f != SERVICE_SUCCESS) |
| s->result = f; |
| |
| unit_watch_all_pids(UNIT(s)); |
| |
| r = unit_kill_context( |
| UNIT(s), |
| &s->kill_context, |
| state_to_kill_operation(state), |
| s->main_pid, |
| s->control_pid, |
| s->main_pid_alien); |
| |
| if (r < 0) |
| goto fail; |
| |
| if (r > 0) { |
| if (s->timeout_stop_usec > 0) { |
| r = service_arm_timer(s, s->timeout_stop_usec); |
| if (r < 0) |
| goto fail; |
| } |
| |
| service_set_state(s, state); |
| } else if (IN_SET(state, SERVICE_STOP_SIGABRT, SERVICE_STOP_SIGTERM) && s->kill_context.send_sigkill) |
| service_enter_signal(s, SERVICE_STOP_SIGKILL, SERVICE_SUCCESS); |
| else if (IN_SET(state, SERVICE_STOP_SIGABRT, SERVICE_STOP_SIGTERM, SERVICE_STOP_SIGKILL)) |
| service_enter_stop_post(s, SERVICE_SUCCESS); |
| else if (state == SERVICE_FINAL_SIGTERM && s->kill_context.send_sigkill) |
| service_enter_signal(s, SERVICE_FINAL_SIGKILL, SERVICE_SUCCESS); |
| else |
| service_enter_dead(s, SERVICE_SUCCESS, true); |
| |
| return; |
| |
| fail: |
| log_unit_warning_errno(UNIT(s), r, "Failed to kill processes: %m"); |
| |
| if (IN_SET(state, SERVICE_STOP_SIGABRT, SERVICE_STOP_SIGTERM, SERVICE_STOP_SIGKILL)) |
| service_enter_stop_post(s, SERVICE_FAILURE_RESOURCES); |
| else |
| service_enter_dead(s, SERVICE_FAILURE_RESOURCES, true); |
| } |
| |
| static void service_enter_stop_by_notify(Service *s) { |
| assert(s); |
| |
| unit_watch_all_pids(UNIT(s)); |
| |
| if (s->timeout_stop_usec > 0) |
| service_arm_timer(s, s->timeout_stop_usec); |
| |
| /* The service told us it's stopping, so it's as if we SIGTERM'd it. */ |
| service_set_state(s, SERVICE_STOP_SIGTERM); |
| } |
| |
| static void service_enter_stop(Service *s, ServiceResult f) { |
| int r; |
| |
| assert(s); |
| |
| if (f != SERVICE_SUCCESS) |
| s->result = f; |
| |
| service_unwatch_control_pid(s); |
| unit_watch_all_pids(UNIT(s)); |
| |
| s->control_command = s->exec_command[SERVICE_EXEC_STOP]; |
| if (s->control_command) { |
| s->control_command_id = SERVICE_EXEC_STOP; |
| |
| r = service_spawn(s, |
| s->control_command, |
| s->timeout_stop_usec, |
| false, |
| !s->permissions_start_only, |
| !s->root_directory_start_only, |
| false, |
| true, |
| &s->control_pid); |
| if (r < 0) |
| goto fail; |
| |
| service_set_state(s, SERVICE_STOP); |
| } else |
| service_enter_signal(s, SERVICE_STOP_SIGTERM, SERVICE_SUCCESS); |
| |
| return; |
| |
| fail: |
| log_unit_warning_errno(UNIT(s), r, "Failed to run 'stop' task: %m"); |
| service_enter_signal(s, SERVICE_STOP_SIGTERM, SERVICE_FAILURE_RESOURCES); |
| } |
| |
| static void service_enter_running(Service *s, ServiceResult f) { |
| int main_pid_ok, cgroup_ok; |
| assert(s); |
| |
| if (f != SERVICE_SUCCESS) |
| s->result = f; |
| |
| main_pid_ok = main_pid_good(s); |
| cgroup_ok = cgroup_good(s); |
| |
| if ((main_pid_ok > 0 || (main_pid_ok < 0 && cgroup_ok != 0)) && |
| (s->bus_name_good || s->type != SERVICE_DBUS)) { |
| |
| /* If there are any queued up sd_notify() |
| * notifications, process them now */ |
| if (s->notify_state == NOTIFY_RELOADING) |
| service_enter_reload_by_notify(s); |
| else if (s->notify_state == NOTIFY_STOPPING) |
| service_enter_stop_by_notify(s); |
| else |
| service_set_state(s, SERVICE_RUNNING); |
| |
| } else if (s->remain_after_exit) |
| service_set_state(s, SERVICE_EXITED); |
| else |
| service_enter_stop(s, SERVICE_SUCCESS); |
| } |
| |
| static void service_enter_start_post(Service *s) { |
| int r; |
| assert(s); |
| |
| service_unwatch_control_pid(s); |
| service_reset_watchdog(s); |
| |
| s->control_command = s->exec_command[SERVICE_EXEC_START_POST]; |
| if (s->control_command) { |
| s->control_command_id = SERVICE_EXEC_START_POST; |
| |
| r = service_spawn(s, |
| s->control_command, |
| s->timeout_start_usec, |
| false, |
| !s->permissions_start_only, |
| !s->root_directory_start_only, |
| false, |
| true, |
| &s->control_pid); |
| if (r < 0) |
| goto fail; |
| |
| service_set_state(s, SERVICE_START_POST); |
| } else |
| service_enter_running(s, SERVICE_SUCCESS); |
| |
| return; |
| |
| fail: |
| log_unit_warning_errno(UNIT(s), r, "Failed to run 'start-post' task: %m"); |
| service_enter_stop(s, SERVICE_FAILURE_RESOURCES); |
| } |
| |
| static void service_kill_control_processes(Service *s) { |
| char *p; |
| |
| if (!UNIT(s)->cgroup_path) |
| return; |
| |
| p = strjoina(UNIT(s)->cgroup_path, "/control"); |
| cg_kill_recursive(SYSTEMD_CGROUP_CONTROLLER, p, SIGKILL, true, true, true, NULL); |
| } |
| |
| static void service_enter_start(Service *s) { |
| ExecCommand *c; |
| pid_t pid; |
| int r; |
| |
| assert(s); |
| |
| service_unwatch_control_pid(s); |
| service_unwatch_main_pid(s); |
| |
| /* We want to ensure that nobody leaks processes from |
| * START_PRE here, so let's go on a killing spree, People |
| * should not spawn long running processes from START_PRE. */ |
| service_kill_control_processes(s); |
| |
| if (s->type == SERVICE_FORKING) { |
| s->control_command_id = SERVICE_EXEC_START; |
| c = s->control_command = s->exec_command[SERVICE_EXEC_START]; |
| |
| s->main_command = NULL; |
| } else { |
| s->control_command_id = _SERVICE_EXEC_COMMAND_INVALID; |
| s->control_command = NULL; |
| |
| c = s->main_command = s->exec_command[SERVICE_EXEC_START]; |
| } |
| |
| if (!c) { |
| assert(s->type == SERVICE_ONESHOT); |
| service_enter_start_post(s); |
| return; |
| } |
| |
| r = service_spawn(s, |
| c, |
| IN_SET(s->type, SERVICE_FORKING, SERVICE_DBUS, SERVICE_NOTIFY, SERVICE_ONESHOT) ? s->timeout_start_usec : 0, |
| true, |
| true, |
| true, |
| true, |
| false, |
| &pid); |
| if (r < 0) |
| goto fail; |
| |
| if (s->type == SERVICE_SIMPLE || s->type == SERVICE_IDLE) { |
| /* For simple services we immediately start |
| * the START_POST binaries. */ |
| |
| service_set_main_pid(s, pid); |
| service_enter_start_post(s); |
| |
| } else if (s->type == SERVICE_FORKING) { |
| |
| /* For forking services we wait until the start |
| * process exited. */ |
| |
| s->control_pid = pid; |
| service_set_state(s, SERVICE_START); |
| |
| } else if (s->type == SERVICE_ONESHOT || |
| s->type == SERVICE_DBUS || |
| s->type == SERVICE_NOTIFY) { |
| |
| /* For oneshot services we wait until the start |
| * process exited, too, but it is our main process. */ |
| |
| /* For D-Bus services we know the main pid right away, |
| * but wait for the bus name to appear on the |
| * bus. Notify services are similar. */ |
| |
| service_set_main_pid(s, pid); |
| service_set_state(s, SERVICE_START); |
| } else |
| assert_not_reached("Unknown service type"); |
| |
| return; |
| |
| fail: |
| log_unit_warning_errno(UNIT(s), r, "Failed to run 'start' task: %m"); |
| service_enter_signal(s, SERVICE_FINAL_SIGTERM, SERVICE_FAILURE_RESOURCES); |
| } |
| |
| static void service_enter_start_pre(Service *s) { |
| int r; |
| |
| assert(s); |
| |
| service_unwatch_control_pid(s); |
| |
| s->control_command = s->exec_command[SERVICE_EXEC_START_PRE]; |
| if (s->control_command) { |
| /* Before we start anything, let's clear up what might |
| * be left from previous runs. */ |
| service_kill_control_processes(s); |
| |
| s->control_command_id = SERVICE_EXEC_START_PRE; |
| |
| r = service_spawn(s, |
| s->control_command, |
| s->timeout_start_usec, |
| false, |
| !s->permissions_start_only, |
| !s->root_directory_start_only, |
| true, |
| true, |
| &s->control_pid); |
| if (r < 0) |
| goto fail; |
| |
| service_set_state(s, SERVICE_START_PRE); |
| } else |
| service_enter_start(s); |
| |
| return; |
| |
| fail: |
| log_unit_warning_errno(UNIT(s), r, "Failed to run 'start-pre' task: %m"); |
| service_enter_dead(s, SERVICE_FAILURE_RESOURCES, true); |
| } |
| |
| static void service_enter_restart(Service *s) { |
| _cleanup_bus_error_free_ sd_bus_error error = SD_BUS_ERROR_NULL; |
| int r; |
| |
| assert(s); |
| |
| if (UNIT(s)->job && UNIT(s)->job->type == JOB_STOP) { |
| /* Don't restart things if we are going down anyway */ |
| log_unit_info(UNIT(s), "Stop job pending for unit, delaying automatic restart."); |
| |
| r = service_arm_timer(s, s->restart_usec); |
| if (r < 0) |
| goto fail; |
| |
| return; |
| } |
| |
| /* Any units that are bound to this service must also be |
| * restarted. We use JOB_RESTART (instead of the more obvious |
| * JOB_START) here so that those dependency jobs will be added |
| * as well. */ |
| r = manager_add_job(UNIT(s)->manager, JOB_RESTART, UNIT(s), JOB_FAIL, false, &error, NULL); |
| if (r < 0) |
| goto fail; |
| |
| /* Note that we stay in the SERVICE_AUTO_RESTART state here, |
| * it will be canceled as part of the service_stop() call that |
| * is executed as part of JOB_RESTART. */ |
| |
| log_unit_debug(UNIT(s), "Scheduled restart job."); |
| return; |
| |
| fail: |
| log_unit_warning(UNIT(s), "Failed to schedule restart job: %s", bus_error_message(&error, -r)); |
| service_enter_dead(s, SERVICE_FAILURE_RESOURCES, false); |
| } |
| |
| static void service_enter_reload_by_notify(Service *s) { |
| assert(s); |
| |
| if (s->timeout_start_usec > 0) |
| service_arm_timer(s, s->timeout_start_usec); |
| |
| service_set_state(s, SERVICE_RELOAD); |
| } |
| |
| static void service_enter_reload(Service *s) { |
| int r; |
| |
| assert(s); |
| |
| service_unwatch_control_pid(s); |
| |
| s->control_command = s->exec_command[SERVICE_EXEC_RELOAD]; |
| if (s->control_command) { |
| s->control_command_id = SERVICE_EXEC_RELOAD; |
| |
| r = service_spawn(s, |
| s->control_command, |
| s->timeout_start_usec, |
| false, |
| !s->permissions_start_only, |
| !s->root_directory_start_only, |
| false, |
| true, |
| &s->control_pid); |
| if (r < 0) |
| goto fail; |
| |
| service_set_state(s, SERVICE_RELOAD); |
| } else |
| service_enter_running(s, SERVICE_SUCCESS); |
| |
| return; |
| |
| fail: |
| log_unit_warning_errno(UNIT(s), r, "Failed to run 'reload' task: %m"); |
| s->reload_result = SERVICE_FAILURE_RESOURCES; |
| service_enter_running(s, SERVICE_SUCCESS); |
| } |
| |
| static void service_run_next_control(Service *s) { |
| int r; |
| |
| assert(s); |
| assert(s->control_command); |
| assert(s->control_command->command_next); |
| |
| assert(s->control_command_id != SERVICE_EXEC_START); |
| |
| s->control_command = s->control_command->command_next; |
| service_unwatch_control_pid(s); |
| |
| r = service_spawn(s, |
| s->control_command, |
| IN_SET(s->state, SERVICE_START_PRE, SERVICE_START, SERVICE_START_POST, SERVICE_RUNNING, SERVICE_RELOAD) ? s->timeout_start_usec : s->timeout_stop_usec, |
| false, |
| !s->permissions_start_only, |
| !s->root_directory_start_only, |
| s->control_command_id == SERVICE_EXEC_START_PRE || |
| s->control_command_id == SERVICE_EXEC_STOP_POST, |
| true, |
| &s->control_pid); |
| if (r < 0) |
| goto fail; |
| |
| return; |
| |
| fail: |
| log_unit_warning_errno(UNIT(s), r, "Failed to run next control task: %m"); |
| |
| if (s->state == SERVICE_START_PRE) |
| service_enter_signal(s, SERVICE_FINAL_SIGTERM, SERVICE_FAILURE_RESOURCES); |
| else if (s->state == SERVICE_STOP) |
| service_enter_signal(s, SERVICE_STOP_SIGTERM, SERVICE_FAILURE_RESOURCES); |
| else if (s->state == SERVICE_STOP_POST) |
| service_enter_dead(s, SERVICE_FAILURE_RESOURCES, true); |
| else if (s->state == SERVICE_RELOAD) { |
| s->reload_result = SERVICE_FAILURE_RESOURCES; |
| service_enter_running(s, SERVICE_SUCCESS); |
| } else |
| service_enter_stop(s, SERVICE_FAILURE_RESOURCES); |
| } |
| |
| static void service_run_next_main(Service *s) { |
| pid_t pid; |
| int r; |
| |
| assert(s); |
| assert(s->main_command); |
| assert(s->main_command->command_next); |
| assert(s->type == SERVICE_ONESHOT); |
| |
| s->main_command = s->main_command->command_next; |
| service_unwatch_main_pid(s); |
| |
| r = service_spawn(s, |
| s->main_command, |
| s->timeout_start_usec, |
| true, |
| true, |
| true, |
| true, |
| false, |
| &pid); |
| if (r < 0) |
| goto fail; |
| |
| service_set_main_pid(s, pid); |
| |
| return; |
| |
| fail: |
| log_unit_warning_errno(UNIT(s), r, "Failed to run next main task: %m"); |
| service_enter_stop(s, SERVICE_FAILURE_RESOURCES); |
| } |
| |
| static int service_start_limit_test(Service *s) { |
| assert(s); |
| |
| if (ratelimit_test(&s->start_limit)) |
| return 0; |
| |
| log_unit_warning(UNIT(s), "Start request repeated too quickly."); |
| |
| return failure_action(UNIT(s)->manager, s->start_limit_action, s->reboot_arg); |
| } |
| |
| static int service_start(Unit *u) { |
| Service *s = SERVICE(u); |
| int r; |
| |
| assert(s); |
| |
| /* We cannot fulfill this request right now, try again later |
| * please! */ |
| if (IN_SET(s->state, |
| SERVICE_STOP, SERVICE_STOP_SIGABRT, SERVICE_STOP_SIGTERM, SERVICE_STOP_SIGKILL, SERVICE_STOP_POST, |
| SERVICE_FINAL_SIGTERM, SERVICE_FINAL_SIGKILL)) |
| return -EAGAIN; |
| |
| /* Already on it! */ |
| if (IN_SET(s->state, SERVICE_START_PRE, SERVICE_START, SERVICE_START_POST)) |
| return 0; |
| |
| /* A service that will be restarted must be stopped first to |
| * trigger BindsTo and/or OnFailure dependencies. If a user |
| * does not want to wait for the holdoff time to elapse, the |
| * service should be manually restarted, not started. We |
| * simply return EAGAIN here, so that any start jobs stay |
| * queued, and assume that the auto restart timer will |
| * eventually trigger the restart. */ |
| if (s->state == SERVICE_AUTO_RESTART) |
| return -EAGAIN; |
| |
| assert(IN_SET(s->state, SERVICE_DEAD, SERVICE_FAILED)); |
| |
| /* Make sure we don't enter a busy loop of some kind. */ |
| r = service_start_limit_test(s); |
| if (r < 0) { |
| service_enter_dead(s, SERVICE_FAILURE_START_LIMIT, false); |
| return r; |
| } |
| |
| s->result = SERVICE_SUCCESS; |
| s->reload_result = SERVICE_SUCCESS; |
| s->main_pid_known = false; |
| s->main_pid_alien = false; |
| s->forbid_restart = false; |
| s->reset_cpu_usage = true; |
| |
| free(s->status_text); |
| s->status_text = NULL; |
| s->status_errno = 0; |
| |
| s->notify_state = NOTIFY_UNKNOWN; |
| |
| service_enter_start_pre(s); |
| return 1; |
| } |
| |
| static int service_stop(Unit *u) { |
| Service *s = SERVICE(u); |
| |
| assert(s); |
| |
| /* Don't create restart jobs from manual stops. */ |
| s->forbid_restart = true; |
| |
| /* Already on it */ |
| if (IN_SET(s->state, |
| SERVICE_STOP, SERVICE_STOP_SIGABRT, SERVICE_STOP_SIGTERM, SERVICE_STOP_SIGKILL, SERVICE_STOP_POST, |
| SERVICE_FINAL_SIGTERM, SERVICE_FINAL_SIGKILL)) |
| return 0; |
| |
| /* A restart will be scheduled or is in progress. */ |
| if (s->state == SERVICE_AUTO_RESTART) { |
| service_set_state(s, SERVICE_DEAD); |
| return 0; |
| } |
| |
| /* If there's already something running we go directly into |
| * kill mode. */ |
| if (IN_SET(s->state, SERVICE_START_PRE, SERVICE_START, SERVICE_START_POST, SERVICE_RELOAD)) { |
| service_enter_signal(s, SERVICE_STOP_SIGTERM, SERVICE_SUCCESS); |
| return 0; |
| } |
| |
| assert(IN_SET(s->state, SERVICE_RUNNING, SERVICE_EXITED)); |
| |
| service_enter_stop(s, SERVICE_SUCCESS); |
| return 1; |
| } |
| |
| static int service_reload(Unit *u) { |
| Service *s = SERVICE(u); |
| |
| assert(s); |
| |
| assert(s->state == SERVICE_RUNNING || s->state == SERVICE_EXITED); |
| |
| service_enter_reload(s); |
| return 1; |
| } |
| |
| _pure_ static bool service_can_reload(Unit *u) { |
| Service *s = SERVICE(u); |
| |
| assert(s); |
| |
| return !!s->exec_command[SERVICE_EXEC_RELOAD]; |
| } |
| |
| static int service_serialize(Unit *u, FILE *f, FDSet *fds) { |
| Service *s = SERVICE(u); |
| ServiceFDStore *fs; |
| |
| assert(u); |
| assert(f); |
| assert(fds); |
| |
| unit_serialize_item(u, f, "state", service_state_to_string(s->state)); |
| unit_serialize_item(u, f, "result", service_result_to_string(s->result)); |
| unit_serialize_item(u, f, "reload-result", service_result_to_string(s->reload_result)); |
| |
| if (s->control_pid > 0) |
| unit_serialize_item_format(u, f, "control-pid", PID_FMT, s->control_pid); |
| |
| if (s->main_pid_known && s->main_pid > 0) |
| unit_serialize_item_format(u, f, "main-pid", PID_FMT, s->main_pid); |
| |
| unit_serialize_item(u, f, "main-pid-known", yes_no(s->main_pid_known)); |
| unit_serialize_item(u, f, "bus-name-good", yes_no(s->bus_name_good)); |
| |
| if (s->status_text) { |
| _cleanup_free_ char *c = NULL; |
| |
| c = cescape(s->status_text); |
| unit_serialize_item(u, f, "status-text", strempty(c)); |
| } |
| |
| /* FIXME: There's a minor uncleanliness here: if there are |
| * multiple commands attached here, we will start from the |
| * first one again */ |
| if (s->control_command_id >= 0) |
| unit_serialize_item(u, f, "control-command", service_exec_command_to_string(s->control_command_id)); |
| |
| if (s->socket_fd >= 0) { |
| int copy; |
| |
| copy = fdset_put_dup(fds, s->socket_fd); |
| if (copy < 0) |
| return copy; |
| |
| unit_serialize_item_format(u, f, "socket-fd", "%i", copy); |
| } |
| |
| if (s->bus_endpoint_fd >= 0) { |
| int copy; |
| |
| copy = fdset_put_dup(fds, s->bus_endpoint_fd); |
| if (copy < 0) |
| return copy; |
| |
| unit_serialize_item_format(u, f, "endpoint-fd", "%i", copy); |
| } |
| |
| LIST_FOREACH(fd_store, fs, s->fd_store) { |
| int copy; |
| |
| copy = fdset_put_dup(fds, fs->fd); |
| if (copy < 0) |
| return copy; |
| |
| unit_serialize_item_format(u, f, "fd-store-fd", "%i", copy); |
| } |
| |
| if (s->main_exec_status.pid > 0) { |
| unit_serialize_item_format(u, f, "main-exec-status-pid", PID_FMT, s->main_exec_status.pid); |
| dual_timestamp_serialize(f, "main-exec-status-start", &s->main_exec_status.start_timestamp); |
| dual_timestamp_serialize(f, "main-exec-status-exit", &s->main_exec_status.exit_timestamp); |
| |
| if (dual_timestamp_is_set(&s->main_exec_status.exit_timestamp)) { |
| unit_serialize_item_format(u, f, "main-exec-status-code", "%i", s->main_exec_status.code); |
| unit_serialize_item_format(u, f, "main-exec-status-status", "%i", s->main_exec_status.status); |
| } |
| } |
| |
| if (dual_timestamp_is_set(&s->watchdog_timestamp)) |
| dual_timestamp_serialize(f, "watchdog-timestamp", &s->watchdog_timestamp); |
| |
| if (s->forbid_restart) |
| unit_serialize_item(u, f, "forbid-restart", yes_no(s->forbid_restart)); |
| |
| return 0; |
| } |
| |
| static int service_deserialize_item(Unit *u, const char *key, const char *value, FDSet *fds) { |
| Service *s = SERVICE(u); |
| int r; |
| |
| assert(u); |
| assert(key); |
| assert(value); |
| assert(fds); |
| |
| if (streq(key, "state")) { |
| ServiceState state; |
| |
| state = service_state_from_string(value); |
| if (state < 0) |
| log_unit_debug(u, "Failed to parse state value: %s", value); |
| else |
| s->deserialized_state = state; |
| } else if (streq(key, "result")) { |
| ServiceResult f; |
| |
| f = service_result_from_string(value); |
| if (f < 0) |
| log_unit_debug(u, "Failed to parse result value: %s", value); |
| else if (f != SERVICE_SUCCESS) |
| s->result = f; |
| |
| } else if (streq(key, "reload-result")) { |
| ServiceResult f; |
| |
| f = service_result_from_string(value); |
| if (f < 0) |
| log_unit_debug(u, "Failed to parse reload result value: %s", value); |
| else if (f != SERVICE_SUCCESS) |
| s->reload_result = f; |
| |
| } else if (streq(key, "control-pid")) { |
| pid_t pid; |
| |
| if (parse_pid(value, &pid) < 0) |
| log_unit_debug(u, "Failed to parse control-pid value: %s", value); |
| else |
| s->control_pid = pid; |
| } else if (streq(key, "main-pid")) { |
| pid_t pid; |
| |
| if (parse_pid(value, &pid) < 0) |
| log_unit_debug(u, "Failed to parse main-pid value: %s", value); |
| else { |
| service_set_main_pid(s, pid); |
| unit_watch_pid(UNIT(s), pid); |
| } |
| } else if (streq(key, "main-pid-known")) { |
| int b; |
| |
| b = parse_boolean(value); |
| if (b < 0) |
| log_unit_debug(u, "Failed to parse main-pid-known value: %s", value); |
| else |
| s->main_pid_known = b; |
| } else if (streq(key, "bus-name-good")) { |
| int b; |
| |
| b = parse_boolean(value); |
| if (b < 0) |
| log_unit_debug(u, "Failed to parse bus-name-good value: %s", value); |
| else |
| s->bus_name_good = b; |
| } else if (streq(key, "status-text")) { |
| char *t; |
| |
| r = cunescape(value, 0, &t); |
| if (r < 0) |
| log_unit_debug_errno(u, r, "Failed to unescape status text: %s", value); |
| else { |
| free(s->status_text); |
| s->status_text = t; |
| } |
| |
| } else if (streq(key, "control-command")) { |
| ServiceExecCommand id; |
| |
| id = service_exec_command_from_string(value); |
| if (id < 0) |
| log_unit_debug(u, "Failed to parse exec-command value: %s", value); |
| else { |
| s->control_command_id = id; |
| s->control_command = s->exec_command[id]; |
| } |
| } else if (streq(key, "socket-fd")) { |
| int fd; |
| |
| if (safe_atoi(value, &fd) < 0 || fd < 0 || !fdset_contains(fds, fd)) |
| log_unit_debug(u, "Failed to parse socket-fd value: %s", value); |
| else { |
| asynchronous_close(s->socket_fd); |
| s->socket_fd = fdset_remove(fds, fd); |
| } |
| } else if (streq(key, "endpoint-fd")) { |
| int fd; |
| |
| if (safe_atoi(value, &fd) < 0 || fd < 0 || !fdset_contains(fds, fd)) |
| log_unit_debug(u, "Failed to parse endpoint-fd value: %s", value); |
| else { |
| safe_close(s->bus_endpoint_fd); |
| s->bus_endpoint_fd = fdset_remove(fds, fd); |
| } |
| } else if (streq(key, "fd-store-fd")) { |
| int fd; |
| |
| if (safe_atoi(value, &fd) < 0 || fd < 0 || !fdset_contains(fds, fd)) |
| log_unit_debug(u, "Failed to parse fd-store-fd value: %s", value); |
| else { |
| r = service_add_fd_store(s, fd); |
| if (r < 0) |
| log_unit_error_errno(u, r, "Failed to add fd to store: %m"); |
| else if (r > 0) |
| fdset_remove(fds, fd); |
| } |
| |
| } else if (streq(key, "main-exec-status-pid")) { |
| pid_t pid; |
| |
| if (parse_pid(value, &pid) < 0) |
| log_unit_debug(u, "Failed to parse main-exec-status-pid value: %s", value); |
| else |
| s->main_exec_status.pid = pid; |
| } else if (streq(key, "main-exec-status-code")) { |
| int i; |
| |
| if (safe_atoi(value, &i) < 0) |
| log_unit_debug(u, "Failed to parse main-exec-status-code value: %s", value); |
| else |
| s->main_exec_status.code = i; |
| } else if (streq(key, "main-exec-status-status")) { |
| int i; |
| |
| if (safe_atoi(value, &i) < 0) |
| log_unit_debug(u, "Failed to parse main-exec-status-status value: %s", value); |
| else |
| s->main_exec_status.status = i; |
| } else if (streq(key, "main-exec-status-start")) |
| dual_timestamp_deserialize(value, &s->main_exec_status.start_timestamp); |
| else if (streq(key, "main-exec-status-exit")) |
| dual_timestamp_deserialize(value, &s->main_exec_status.exit_timestamp); |
| else if (streq(key, "watchdog-timestamp")) |
| dual_timestamp_deserialize(value, &s->watchdog_timestamp); |
| else if (streq(key, "forbid-restart")) { |
| int b; |
| |
| b = parse_boolean(value); |
| if (b < 0) |
| log_unit_debug(u, "Failed to parse forbid-restart value: %s", value); |
| else |
| s->forbid_restart = b; |
| } else |
| log_unit_debug(u, "Unknown serialization key: %s", key); |
| |
| return 0; |
| } |
| |
| _pure_ static UnitActiveState service_active_state(Unit *u) { |
| const UnitActiveState *table; |
| |
| assert(u); |
| |
| table = SERVICE(u)->type == SERVICE_IDLE ? state_translation_table_idle : state_translation_table; |
| |
| return table[SERVICE(u)->state]; |
| } |
| |
| static const char *service_sub_state_to_string(Unit *u) { |
| assert(u); |
| |
| return service_state_to_string(SERVICE(u)->state); |
| } |
| |
| static bool service_check_gc(Unit *u) { |
| Service *s = SERVICE(u); |
| |
| assert(s); |
| |
| /* Never clean up services that still have a process around, |
| * even if the service is formally dead. */ |
| if (cgroup_good(s) > 0 || |
| main_pid_good(s) > 0 || |
| control_pid_good(s) > 0) |
| return true; |
| |
| return false; |
| } |
| |
| _pure_ static bool service_check_snapshot(Unit *u) { |
| Service *s = SERVICE(u); |
| |
| assert(s); |
| |
| return s->socket_fd < 0; |
| } |
| |
| static int service_retry_pid_file(Service *s) { |
| int r; |
| |
| assert(s->pid_file); |
| assert(s->state == SERVICE_START || s->state == SERVICE_START_POST); |
| |
| r = service_load_pid_file(s, false); |
| if (r < 0) |
| return r; |
| |
| service_unwatch_pid_file(s); |
| |
| service_enter_running(s, SERVICE_SUCCESS); |
| return 0; |
| } |
| |
| static int service_watch_pid_file(Service *s) { |
| int r; |
| |
| log_unit_debug(UNIT(s), "Setting watch for PID file %s", s->pid_file_pathspec->path); |
| |
| r = path_spec_watch(s->pid_file_pathspec, service_dispatch_io); |
| if (r < 0) |
| goto fail; |
| |
| /* the pidfile might have appeared just before we set the watch */ |
| log_unit_debug(UNIT(s), "Trying to read PID file %s in case it changed", s->pid_file_pathspec->path); |
| service_retry_pid_file(s); |
| |
| return 0; |
| fail: |
| log_unit_error_errno(UNIT(s), r, "Failed to set a watch for PID file %s: %m", s->pid_file_pathspec->path); |
| service_unwatch_pid_file(s); |
| return r; |
| } |
| |
| static int service_demand_pid_file(Service *s) { |
| PathSpec *ps; |
| |
| assert(s->pid_file); |
| assert(!s->pid_file_pathspec); |
| |
| ps = new0(PathSpec, 1); |
| if (!ps) |
| return -ENOMEM; |
| |
| ps->unit = UNIT(s); |
| ps->path = strdup(s->pid_file); |
| if (!ps->path) { |
| free(ps); |
| return -ENOMEM; |
| } |
| |
| path_kill_slashes(ps->path); |
| |
| /* PATH_CHANGED would not be enough. There are daemons (sendmail) that |
| * keep their PID file open all the time. */ |
| ps->type = PATH_MODIFIED; |
| ps->inotify_fd = -1; |
| |
| s->pid_file_pathspec = ps; |
| |
| return service_watch_pid_file(s); |
| } |
| |
| static int service_dispatch_io(sd_event_source *source, int fd, uint32_t events, void *userdata) { |
| PathSpec *p = userdata; |
| Service *s; |
| |
| assert(p); |
| |
| s = SERVICE(p->unit); |
| |
| assert(s); |
| assert(fd >= 0); |
| assert(s->state == SERVICE_START || s->state == SERVICE_START_POST); |
| assert(s->pid_file_pathspec); |
| assert(path_spec_owns_inotify_fd(s->pid_file_pathspec, fd)); |
| |
| log_unit_debug(UNIT(s), "inotify event"); |
| |
| if (path_spec_fd_event(p, events) < 0) |
| goto fail; |
| |
| if (service_retry_pid_file(s) == 0) |
| return 0; |
| |
| if (service_watch_pid_file(s) < 0) |
| goto fail; |
| |
| return 0; |
| |
| fail: |
| service_unwatch_pid_file(s); |
| service_enter_signal(s, SERVICE_STOP_SIGTERM, SERVICE_FAILURE_RESOURCES); |
| return 0; |
| } |
| |
| static void service_notify_cgroup_empty_event(Unit *u) { |
| Service *s = SERVICE(u); |
| |
| assert(u); |
| |
| log_unit_debug(u, "cgroup is empty"); |
| |
| switch (s->state) { |
| |
| /* Waiting for SIGCHLD is usually more interesting, |
| * because it includes return codes/signals. Which is |
| * why we ignore the cgroup events for most cases, |
| * except when we don't know pid which to expect the |
| * SIGCHLD for. */ |
| |
| case SERVICE_START: |
| case SERVICE_START_POST: |
| /* If we were hoping for the daemon to write its PID file, |
| * we can give up now. */ |
| if (s->pid_file_pathspec) { |
| log_unit_warning(u, "Daemon never wrote its PID file. Failing."); |
| |
| service_unwatch_pid_file(s); |
| if (s->state == SERVICE_START) |
| service_enter_signal(s, SERVICE_FINAL_SIGTERM, SERVICE_FAILURE_RESOURCES); |
| else |
| service_enter_stop(s, SERVICE_FAILURE_RESOURCES); |
| } |
| break; |
| |
| case SERVICE_RUNNING: |
| /* service_enter_running() will figure out what to do */ |
| service_enter_running(s, SERVICE_SUCCESS); |
| break; |
| |
| case SERVICE_STOP_SIGABRT: |
| case SERVICE_STOP_SIGTERM: |
| case SERVICE_STOP_SIGKILL: |
| |
| if (main_pid_good(s) <= 0 && !control_pid_good(s)) |
| service_enter_stop_post(s, SERVICE_SUCCESS); |
| |
| break; |
| |
| case SERVICE_STOP_POST: |
| case SERVICE_FINAL_SIGTERM: |
| case SERVICE_FINAL_SIGKILL: |
| if (main_pid_good(s) <= 0 && !control_pid_good(s)) |
| service_enter_dead(s, SERVICE_SUCCESS, true); |
| |
| break; |
| |
| default: |
| ; |
| } |
| } |
| |
| static void service_sigchld_event(Unit *u, pid_t pid, int code, int status) { |
| Service *s = SERVICE(u); |
| ServiceResult f; |
| |
| assert(s); |
| assert(pid >= 0); |
| |
| if (UNIT(s)->fragment_path ? is_clean_exit(code, status, &s->success_status) : |
| is_clean_exit_lsb(code, status, &s->success_status)) |
| f = SERVICE_SUCCESS; |
| else if (code == CLD_EXITED) |
| f = SERVICE_FAILURE_EXIT_CODE; |
| else if (code == CLD_KILLED) |
| f = SERVICE_FAILURE_SIGNAL; |
| else if (code == CLD_DUMPED) |
| f = SERVICE_FAILURE_CORE_DUMP; |
| else |
| assert_not_reached("Unknown code"); |
| |
| if (s->main_pid == pid) { |
| /* Forking services may occasionally move to a new PID. |
| * As long as they update the PID file before exiting the old |
| * PID, they're fine. */ |
| if (service_load_pid_file(s, false) == 0) |
| return; |
| |
| s->main_pid = 0; |
| exec_status_exit(&s->main_exec_status, &s->exec_context, pid, code, status); |
| |
| if (s->main_command) { |
| /* If this is not a forking service than the |
| * main process got started and hence we copy |
| * the exit status so that it is recorded both |
| * as main and as control process exit |
| * status */ |
| |
| s->main_command->exec_status = s->main_exec_status; |
| |
| if (s->main_command->ignore) |
| f = SERVICE_SUCCESS; |
| } else if (s->exec_command[SERVICE_EXEC_START]) { |
| |
| /* If this is a forked process, then we should |
| * ignore the return value if this was |
| * configured for the starter process */ |
| |
| if (s->exec_command[SERVICE_EXEC_START]->ignore) |
| f = SERVICE_SUCCESS; |
| } |
| |
| log_struct(f == SERVICE_SUCCESS ? LOG_DEBUG : LOG_NOTICE, |
| LOG_UNIT_ID(u), |
| LOG_UNIT_MESSAGE(u, "Main process exited, code=%s, status=%i/%s", |
| sigchld_code_to_string(code), status, |
| strna(code == CLD_EXITED |
| ? exit_status_to_string(status, EXIT_STATUS_FULL) |
| : signal_to_string(status))), |
| "EXIT_CODE=%s", sigchld_code_to_string(code), |
| "EXIT_STATUS=%i", status, |
| NULL); |
| |
| if (f != SERVICE_SUCCESS) |
| s->result = f; |
| |
| if (s->main_command && |
| s->main_command->command_next && |
| f == SERVICE_SUCCESS) { |
| |
| /* There is another command to * |
| * execute, so let's do that. */ |
| |
| log_unit_debug(u, "Running next main command for state %s.", service_state_to_string(s->state)); |
| service_run_next_main(s); |
| |
| } else { |
| |
| /* The service exited, so the service is officially |
| * gone. */ |
| s->main_command = NULL; |
| |
| switch (s->state) { |
| |
| case SERVICE_START_POST: |
| case SERVICE_RELOAD: |
| case SERVICE_STOP: |
| /* Need to wait until the operation is |
| * done */ |
| break; |
| |
| case SERVICE_START: |
| if (s->type == SERVICE_ONESHOT) { |
| /* This was our main goal, so let's go on */ |
| if (f == SERVICE_SUCCESS) |
| service_enter_start_post(s); |
| else |
| service_enter_signal(s, SERVICE_FINAL_SIGTERM, f); |
| break; |
| } |
| |
| /* Fall through */ |
| |
| case SERVICE_RUNNING: |
| service_enter_running(s, f); |
| break; |
| |
| case SERVICE_STOP_SIGABRT: |
| case SERVICE_STOP_SIGTERM: |
| case SERVICE_STOP_SIGKILL: |
| |
| if (!control_pid_good(s)) |
| service_enter_stop_post(s, f); |
| |
| /* If there is still a control process, wait for that first */ |
| break; |
| |
| case SERVICE_STOP_POST: |
| case SERVICE_FINAL_SIGTERM: |
| case SERVICE_FINAL_SIGKILL: |
| |
| if (!control_pid_good(s)) |
| service_enter_dead(s, f, true); |
| break; |
| |
| default: |
| assert_not_reached("Uh, main process died at wrong time."); |
| } |
| } |
| |
| } else if (s->control_pid == pid) { |
| s->control_pid = 0; |
| |
| if (s->control_command) { |
| exec_status_exit(&s->control_command->exec_status, &s->exec_context, pid, code, status); |
| |
| if (s->control_command->ignore) |
| f = SERVICE_SUCCESS; |
| } |
| |
| log_unit_full(u, f == SERVICE_SUCCESS ? LOG_DEBUG : LOG_NOTICE, 0, |
| "Control process exited, code=%s status=%i", |
| sigchld_code_to_string(code), status); |
| |
| if (f != SERVICE_SUCCESS) |
| s->result = f; |
| |
| /* Immediately get rid of the cgroup, so that the |
| * kernel doesn't delay the cgroup empty messages for |
| * the service cgroup any longer than necessary */ |
| service_kill_control_processes(s); |
| |
| if (s->control_command && |
| s->control_command->command_next && |
| f == SERVICE_SUCCESS) { |
| |
| /* There is another command to * |
| * execute, so let's do that. */ |
| |
| log_unit_debug(u, "Running next control command for state %s.", service_state_to_string(s->state)); |
| service_run_next_control(s); |
| |
| } else { |
| /* No further commands for this step, so let's |
| * figure out what to do next */ |
| |
| s->control_command = NULL; |
| s->control_command_id = _SERVICE_EXEC_COMMAND_INVALID; |
| |
| log_unit_debug(u, "Got final SIGCHLD for state %s.", service_state_to_string(s->state)); |
| |
| switch (s->state) { |
| |
| case SERVICE_START_PRE: |
| if (f == SERVICE_SUCCESS) |
| service_enter_start(s); |
| else |
| service_enter_signal(s, SERVICE_FINAL_SIGTERM, f); |
| break; |
| |
| case SERVICE_START: |
| if (s->type != SERVICE_FORKING) |
| /* Maybe spurious event due to a reload that changed the type? */ |
| break; |
| |
| if (f != SERVICE_SUCCESS) { |
| service_enter_signal(s, SERVICE_FINAL_SIGTERM, f); |
| break; |
| } |
| |
| if (s->pid_file) { |
| bool has_start_post; |
| int r; |
| |
| /* Let's try to load the pid file here if we can. |
| * The PID file might actually be created by a START_POST |
| * script. In that case don't worry if the loading fails. */ |
| |
| has_start_post = !!s->exec_command[SERVICE_EXEC_START_POST]; |
| r = service_load_pid_file(s, !has_start_post); |
| if (!has_start_post && r < 0) { |
| r = service_demand_pid_file(s); |
| if (r < 0 || !cgroup_good(s)) |
| service_enter_signal(s, SERVICE_FINAL_SIGTERM, SERVICE_FAILURE_RESOURCES); |
| break; |
| } |
| } else |
| service_search_main_pid(s); |
| |
| service_enter_start_post(s); |
| break; |
| |
| case SERVICE_START_POST: |
| if (f != SERVICE_SUCCESS) { |
| service_enter_stop(s, f); |
| break; |
| } |
| |
| if (s->pid_file) { |
| int r; |
| |
| r = service_load_pid_file(s, true); |
| if (r < 0) { |
| r = service_demand_pid_file(s); |
| if (r < 0 || !cgroup_good(s)) |
| service_enter_stop(s, SERVICE_FAILURE_RESOURCES); |
| break; |
| } |
| } else |
| service_search_main_pid(s); |
| |
| service_enter_running(s, SERVICE_SUCCESS); |
| break; |
| |
| case SERVICE_RELOAD: |
| if (f == SERVICE_SUCCESS) { |
| service_load_pid_file(s, true); |
| service_search_main_pid(s); |
| } |
| |
| s->reload_result = f; |
| service_enter_running(s, SERVICE_SUCCESS); |
| break; |
| |
| case SERVICE_STOP: |
| service_enter_signal(s, SERVICE_STOP_SIGTERM, f); |
| break; |
| |
| case SERVICE_STOP_SIGABRT: |
| case SERVICE_STOP_SIGTERM: |
| case SERVICE_STOP_SIGKILL: |
| if (main_pid_good(s) <= 0) |
| service_enter_stop_post(s, f); |
| |
| /* If there is still a service |
| * process around, wait until |
| * that one quit, too */ |
| break; |
| |
| case SERVICE_STOP_POST: |
| case SERVICE_FINAL_SIGTERM: |
| case SERVICE_FINAL_SIGKILL: |
| if (main_pid_good(s) <= 0) |
| service_enter_dead(s, f, true); |
| break; |
| |
| default: |
| assert_not_reached("Uh, control process died at wrong time."); |
| } |
| } |
| } |
| |
| /* Notify clients about changed exit status */ |
| unit_add_to_dbus_queue(u); |
| |
| /* We got one SIGCHLD for the service, let's watch all |
| * processes that are now running of the service, and watch |
| * that. Among the PIDs we then watch will be children |
| * reassigned to us, which hopefully allows us to identify |
| * when all children are gone */ |
| unit_tidy_watch_pids(u, s->main_pid, s->control_pid); |
| unit_watch_all_pids(u); |
| |
| /* If the PID set is empty now, then let's finish this off */ |
| if (set_isempty(u->pids)) |
| service_notify_cgroup_empty_event(u); |
| } |
| |
| static int service_dispatch_timer(sd_event_source *source, usec_t usec, void *userdata) { |
| Service *s = SERVICE(userdata); |
| |
| assert(s); |
| assert(source == s->timer_event_source); |
| |
| switch (s->state) { |
| |
| case SERVICE_START_PRE: |
| case SERVICE_START: |
| log_unit_warning(UNIT(s), "%s operation timed out. Terminating.", s->state == SERVICE_START ? "Start" : "Start-pre"); |
| service_enter_signal(s, SERVICE_FINAL_SIGTERM, SERVICE_FAILURE_TIMEOUT); |
| break; |
| |
| case SERVICE_START_POST: |
| log_unit_warning(UNIT(s), "Start-post operation timed out. Stopping."); |
| service_enter_stop(s, SERVICE_FAILURE_TIMEOUT); |
| break; |
| |
| case SERVICE_RELOAD: |
| log_unit_warning(UNIT(s), "Reload operation timed out. Stopping."); |
| s->reload_result = SERVICE_FAILURE_TIMEOUT; |
| service_enter_running(s, SERVICE_SUCCESS); |
| break; |
| |
| case SERVICE_STOP: |
| log_unit_warning(UNIT(s), "Stopping timed out. Terminating."); |
| service_enter_signal(s, SERVICE_STOP_SIGTERM, SERVICE_FAILURE_TIMEOUT); |
| break; |
| |
| case SERVICE_STOP_SIGABRT: |
| log_unit_warning(UNIT(s), "State 'stop-sigabrt' timed out. Terminating."); |
| service_enter_signal(s, SERVICE_STOP_SIGTERM, SERVICE_FAILURE_TIMEOUT); |
| break; |
| |
| case SERVICE_STOP_SIGTERM: |
| if (s->kill_context.send_sigkill) { |
| log_unit_warning(UNIT(s), "State 'stop-sigterm' timed out. Killing."); |
| service_enter_signal(s, SERVICE_STOP_SIGKILL, SERVICE_FAILURE_TIMEOUT); |
| } else { |
| log_unit_warning(UNIT(s), "State 'stop-sigterm' timed out. Skipping SIGKILL."); |
| service_enter_stop_post(s, SERVICE_FAILURE_TIMEOUT); |
| } |
| |
| break; |
| |
| case SERVICE_STOP_SIGKILL: |
| /* Uh, we sent a SIGKILL and it is still not gone? |
| * Must be something we cannot kill, so let's just be |
| * weirded out and continue */ |
| |
| log_unit_warning(UNIT(s), "Processes still around after SIGKILL. Ignoring."); |
| service_enter_stop_post(s, SERVICE_FAILURE_TIMEOUT); |
| break; |
| |
| case SERVICE_STOP_POST: |
| log_unit_warning(UNIT(s), "State 'stop-post' timed out. Terminating."); |
| service_enter_signal(s, SERVICE_FINAL_SIGTERM, SERVICE_FAILURE_TIMEOUT); |
| break; |
| |
| case SERVICE_FINAL_SIGTERM: |
| if (s->kill_context.send_sigkill) { |
| log_unit_warning(UNIT(s), "State 'stop-final-sigterm' timed out. Killing."); |
| service_enter_signal(s, SERVICE_FINAL_SIGKILL, SERVICE_FAILURE_TIMEOUT); |
| } else { |
| log_unit_warning(UNIT(s), "State 'stop-final-sigterm' timed out. Skipping SIGKILL. Entering failed mode."); |
| service_enter_dead(s, SERVICE_FAILURE_TIMEOUT, false); |
| } |
| |
| break; |
| |
| case SERVICE_FINAL_SIGKILL: |
| log_unit_warning(UNIT(s), "Processes still around after final SIGKILL. Entering failed mode."); |
| service_enter_dead(s, SERVICE_FAILURE_TIMEOUT, true); |
| break; |
| |
| case SERVICE_AUTO_RESTART: |
| log_unit_info(UNIT(s), |
| s->restart_usec > 0 ? |
| "Service hold-off time over, scheduling restart." : |
| "Service has no hold-off time, scheduling restart."); |
| service_enter_restart(s); |
| break; |
| |
| default: |
| assert_not_reached("Timeout at wrong time."); |
| } |
| |
| return 0; |
| } |
| |
| static int service_dispatch_watchdog(sd_event_source *source, usec_t usec, void *userdata) { |
| Service *s = SERVICE(userdata); |
| char t[FORMAT_TIMESPAN_MAX]; |
| |
| assert(s); |
| assert(source == s->watchdog_event_source); |
| |
| log_unit_error(UNIT(s), "Watchdog timeout (limit %s)!", |
| format_timespan(t, sizeof(t), s->watchdog_usec, 1)); |
| |
| service_enter_signal(s, SERVICE_STOP_SIGABRT, SERVICE_FAILURE_WATCHDOG); |
| |
| return 0; |
| } |
| |
| static void service_notify_message(Unit *u, pid_t pid, char **tags, FDSet *fds) { |
| Service *s = SERVICE(u); |
| _cleanup_free_ char *cc = NULL; |
| bool notify_dbus = false; |
| const char *e; |
| |
| assert(u); |
| |
| cc = strv_join(tags, ", "); |
| |
| if (s->notify_access == NOTIFY_NONE) { |
| log_unit_warning(u, "Got notification message from PID "PID_FMT", but reception is disabled.", pid); |
| return; |
| } else if (s->notify_access == NOTIFY_MAIN && pid != s->main_pid) { |
| if (s->main_pid != 0) |
| log_unit_warning(u, "Got notification message from PID "PID_FMT", but reception only permitted for main PID "PID_FMT, pid, s->main_pid); |
| else |
| log_unit_debug(u, "Got notification message from PID "PID_FMT", but reception only permitted for main PID which is currently not known", pid); |
| return; |
| } else |
| log_unit_debug(u, "Got notification message from PID "PID_FMT" (%s)", pid, isempty(cc) ? "n/a" : cc); |
| |
| /* Interpret MAINPID= */ |
| e = strv_find_startswith(tags, "MAINPID="); |
| if (e && IN_SET(s->state, SERVICE_START, SERVICE_START_POST, SERVICE_RUNNING, SERVICE_RELOAD)) { |
| if (parse_pid(e, &pid) < 0) |
| log_unit_warning(u, "Failed to parse MAINPID= field in notification message: %s", e); |
| else { |
| service_set_main_pid(s, pid); |
| unit_watch_pid(UNIT(s), pid); |
| notify_dbus = true; |
| } |
| } |
| |
| /* Interpret RELOADING= */ |
| if (strv_find(tags, "RELOADING=1")) { |
| |
| s->notify_state = NOTIFY_RELOADING; |
| |
| if (s->state == SERVICE_RUNNING) |
| service_enter_reload_by_notify(s); |
| |
| notify_dbus = true; |
| } |
| |
| /* Interpret READY= */ |
| if (strv_find(tags, "READY=1")) { |
| |
| s->notify_state = NOTIFY_READY; |
| |
| /* Type=notify services inform us about completed |
| * initialization with READY=1 */ |
| if (s->type == SERVICE_NOTIFY && s->state == SERVICE_START) |
| service_enter_start_post(s); |
| |
| /* Sending READY=1 while we are reloading informs us |
| * that the reloading is complete */ |
| if (s->state == SERVICE_RELOAD && s->control_pid == 0) |
| service_enter_running(s, SERVICE_SUCCESS); |
| |
| notify_dbus = true; |
| } |
| |
| /* Interpret STOPPING= */ |
| if (strv_find(tags, "STOPPING=1")) { |
| |
| s->notify_state = NOTIFY_STOPPING; |
| |
| if (s->state == SERVICE_RUNNING) |
| service_enter_stop_by_notify(s); |
| |
| notify_dbus = true; |
| } |
| |
| /* Interpret STATUS= */ |
| e = strv_find_startswith(tags, "STATUS="); |
| if (e) { |
| _cleanup_free_ char *t = NULL; |
| |
| if (!isempty(e)) { |
| if (!utf8_is_valid(e)) |
| log_unit_warning(u, "Status message in notification message is not UTF-8 clean."); |
| else { |
| t = strdup(e); |
| if (!t) |
| log_oom(); |
| } |
| } |
| |
| if (!streq_ptr(s->status_text, t)) { |
| |
| free(s->status_text); |
| s->status_text = t; |
| t = NULL; |
| |
| notify_dbus = true; |
| } |
| } |
| |
| /* Interpret ERRNO= */ |
| e = strv_find_startswith(tags, "ERRNO="); |
| if (e) { |
| int status_errno; |
| |
| if (safe_atoi(e, &status_errno) < 0 || status_errno < 0) |
| log_unit_warning(u, "Failed to parse ERRNO= field in notification message: %s", e); |
| else { |
| if (s->status_errno != status_errno) { |
| s->status_errno = status_errno; |
| notify_dbus = true; |
| } |
| } |
| } |
| |
| /* Interpret WATCHDOG= */ |
| if (strv_find(tags, "WATCHDOG=1")) { |
| service_reset_watchdog(s); |
| } |
| |
| /* Add the passed fds to the fd store */ |
| if (strv_find(tags, "FDSTORE=1")) { |
| service_add_fd_store_set(s, fds); |
| } |
| |
| /* Notify clients about changed status or main pid */ |
| if (notify_dbus) |
| unit_add_to_dbus_queue(u); |
| } |
| |
| static int service_get_timeout(Unit *u, uint64_t *timeout) { |
| Service *s = SERVICE(u); |
| int r; |
| |
| if (!s->timer_event_source) |
| return 0; |
| |
| r = sd_event_source_get_time(s->timer_event_source, timeout); |
| if (r < 0) |
| return r; |
| |
| return 1; |
| } |
| |
| static void service_bus_name_owner_change( |
| Unit *u, |
| const char *name, |
| const char *old_owner, |
| const char *new_owner) { |
| |
| Service *s = SERVICE(u); |
| int r; |
| |
| assert(s); |
| assert(name); |
| |
| assert(streq(s->bus_name, name)); |
| assert(old_owner || new_owner); |
| |
| if (old_owner && new_owner) |
| log_unit_debug(u, "D-Bus name %s changed owner from %s to %s", name, old_owner, new_owner); |
| else if (old_owner) |
| log_unit_debug(u, "D-Bus name %s no longer registered by %s", name, old_owner); |
| else |
| log_unit_debug(u, "D-Bus name %s now registered by %s", name, new_owner); |
| |
| s->bus_name_good = !!new_owner; |
| |
| if (s->type == SERVICE_DBUS) { |
| |
| /* service_enter_running() will figure out what to |
| * do */ |
| if (s->state == SERVICE_RUNNING) |
| service_enter_running(s, SERVICE_SUCCESS); |
| else if (s->state == SERVICE_START && new_owner) |
| service_enter_start_post(s); |
| |
| } else if (new_owner && |
| s->main_pid <= 0 && |
| (s->state == SERVICE_START || |
| s->state == SERVICE_START_POST || |
| s->state == SERVICE_RUNNING || |
| s->state == SERVICE_RELOAD)) { |
| |
| _cleanup_bus_creds_unref_ sd_bus_creds *creds = NULL; |
| pid_t pid; |
| |
| /* Try to acquire PID from bus service */ |
| |
| r = sd_bus_get_name_creds(u->manager->api_bus, name, SD_BUS_CREDS_PID, &creds); |
| if (r >= 0) |
| r = sd_bus_creds_get_pid(creds, &pid); |
| if (r >= 0) { |
| log_unit_debug(u, "D-Bus name %s is now owned by process %u", name, (unsigned) pid); |
| |
| service_set_main_pid(s, pid); |
| unit_watch_pid(UNIT(s), pid); |
| } |
| } |
| } |
| |
| int service_set_socket_fd(Service *s, int fd, Socket *sock, bool selinux_context_net) { |
| _cleanup_free_ char *peer = NULL; |
| int r; |
| |
| assert(s); |
| assert(fd >= 0); |
| |
| /* This is called by the socket code when instantiating a new |
| * service for a stream socket and the socket needs to be |
| * configured. */ |
| |
| if (UNIT(s)->load_state != UNIT_LOADED) |
| return -EINVAL; |
| |
| if (s->socket_fd >= 0) |
| return -EBUSY; |
| |
| if (s->state != SERVICE_DEAD) |
| return -EAGAIN; |
| |
| if (getpeername_pretty(fd, &peer) >= 0) { |
| |
| if (UNIT(s)->description) { |
| _cleanup_free_ char *a; |
| |
| a = strjoin(UNIT(s)->description, " (", peer, ")", NULL); |
| if (!a) |
| return -ENOMEM; |
| |
| r = unit_set_description(UNIT(s), a); |
| } else |
| r = unit_set_description(UNIT(s), peer); |
| |
| if (r < 0) |
| return r; |
| } |
| |
| s->socket_fd = fd; |
| s->socket_fd_selinux_context_net = selinux_context_net; |
| |
| unit_ref_set(&s->accept_socket, UNIT(sock)); |
| |
| return unit_add_two_dependencies(UNIT(sock), UNIT_BEFORE, UNIT_TRIGGERS, UNIT(s), false); |
| } |
| |
| static void service_reset_failed(Unit *u) { |
| Service *s = SERVICE(u); |
| |
| assert(s); |
| |
| if (s->state == SERVICE_FAILED) |
| service_set_state(s, SERVICE_DEAD); |
| |
| s->result = SERVICE_SUCCESS; |
| s->reload_result = SERVICE_SUCCESS; |
| |
| RATELIMIT_RESET(s->start_limit); |
| } |
| |
| static int service_kill(Unit *u, KillWho who, int signo, sd_bus_error *error) { |
| Service *s = SERVICE(u); |
| |
| return unit_kill_common(u, who, signo, s->main_pid, s->control_pid, error); |
| } |
| |
| static const char* const service_state_table[_SERVICE_STATE_MAX] = { |
| [SERVICE_DEAD] = "dead", |
| [SERVICE_START_PRE] = "start-pre", |
| [SERVICE_START] = "start", |
| [SERVICE_START_POST] = "start-post", |
| [SERVICE_RUNNING] = "running", |
| [SERVICE_EXITED] = "exited", |
| [SERVICE_RELOAD] = "reload", |
| [SERVICE_STOP] = "stop", |
| [SERVICE_STOP_SIGABRT] = "stop-sigabrt", |
| [SERVICE_STOP_SIGTERM] = "stop-sigterm", |
| [SERVICE_STOP_SIGKILL] = "stop-sigkill", |
| [SERVICE_STOP_POST] = "stop-post", |
| [SERVICE_FINAL_SIGTERM] = "final-sigterm", |
| [SERVICE_FINAL_SIGKILL] = "final-sigkill", |
| [SERVICE_FAILED] = "failed", |
| [SERVICE_AUTO_RESTART] = "auto-restart", |
| }; |
| |
| DEFINE_STRING_TABLE_LOOKUP(service_state, ServiceState); |
| |
| static const char* const service_restart_table[_SERVICE_RESTART_MAX] = { |
| [SERVICE_RESTART_NO] = "no", |
| [SERVICE_RESTART_ON_SUCCESS] = "on-success", |
| [SERVICE_RESTART_ON_FAILURE] = "on-failure", |
| [SERVICE_RESTART_ON_ABNORMAL] = "on-abnormal", |
| [SERVICE_RESTART_ON_WATCHDOG] = "on-watchdog", |
| [SERVICE_RESTART_ON_ABORT] = "on-abort", |
| [SERVICE_RESTART_ALWAYS] = "always", |
| }; |
| |
| DEFINE_STRING_TABLE_LOOKUP(service_restart, ServiceRestart); |
| |
| static const char* const service_type_table[_SERVICE_TYPE_MAX] = { |
| [SERVICE_SIMPLE] = "simple", |
| [SERVICE_FORKING] = "forking", |
| [SERVICE_ONESHOT] = "oneshot", |
| [SERVICE_DBUS] = "dbus", |
| [SERVICE_NOTIFY] = "notify", |
| [SERVICE_IDLE] = "idle" |
| }; |
| |
| DEFINE_STRING_TABLE_LOOKUP(service_type, ServiceType); |
| |
| static const char* const service_exec_command_table[_SERVICE_EXEC_COMMAND_MAX] = { |
| [SERVICE_EXEC_START_PRE] = "ExecStartPre", |
| [SERVICE_EXEC_START] = "ExecStart", |
| [SERVICE_EXEC_START_POST] = "ExecStartPost", |
| [SERVICE_EXEC_RELOAD] = "ExecReload", |
| [SERVICE_EXEC_STOP] = "ExecStop", |
| [SERVICE_EXEC_STOP_POST] = "ExecStopPost", |
| }; |
| |
| DEFINE_STRING_TABLE_LOOKUP(service_exec_command, ServiceExecCommand); |
| |
| static const char* const notify_access_table[_NOTIFY_ACCESS_MAX] = { |
| [NOTIFY_NONE] = "none", |
| [NOTIFY_MAIN] = "main", |
| [NOTIFY_ALL] = "all" |
| }; |
| |
| DEFINE_STRING_TABLE_LOOKUP(notify_access, NotifyAccess); |
| |
| static const char* const notify_state_table[_NOTIFY_STATE_MAX] = { |
| [NOTIFY_UNKNOWN] = "unknown", |
| [NOTIFY_READY] = "ready", |
| [NOTIFY_RELOADING] = "reloading", |
| [NOTIFY_STOPPING] = "stopping", |
| }; |
| |
| DEFINE_STRING_TABLE_LOOKUP(notify_state, NotifyState); |
| |
| static const char* const service_result_table[_SERVICE_RESULT_MAX] = { |
| [SERVICE_SUCCESS] = "success", |
| [SERVICE_FAILURE_RESOURCES] = "resources", |
| [SERVICE_FAILURE_TIMEOUT] = "timeout", |
| [SERVICE_FAILURE_EXIT_CODE] = "exit-code", |
| [SERVICE_FAILURE_SIGNAL] = "signal", |
| [SERVICE_FAILURE_CORE_DUMP] = "core-dump", |
| [SERVICE_FAILURE_WATCHDOG] = "watchdog", |
| [SERVICE_FAILURE_START_LIMIT] = "start-limit" |
| }; |
| |
| DEFINE_STRING_TABLE_LOOKUP(service_result, ServiceResult); |
| |
| const UnitVTable service_vtable = { |
| .object_size = sizeof(Service), |
| .exec_context_offset = offsetof(Service, exec_context), |
| .cgroup_context_offset = offsetof(Service, cgroup_context), |
| .kill_context_offset = offsetof(Service, kill_context), |
| .exec_runtime_offset = offsetof(Service, exec_runtime), |
| |
| .sections = |
| "Unit\0" |
| "Service\0" |
| "Install\0", |
| .private_section = "Service", |
| |
| .init = service_init, |
| .done = service_done, |
| .load = service_load, |
| .release_resources = service_release_resources, |
| |
| .coldplug = service_coldplug, |
| |
| .dump = service_dump, |
| |
| .start = service_start, |
| .stop = service_stop, |
| .reload = service_reload, |
| |
| .can_reload = service_can_reload, |
| |
| .kill = service_kill, |
| |
| .serialize = service_serialize, |
| .deserialize_item = service_deserialize_item, |
| |
| .active_state = service_active_state, |
| .sub_state_to_string = service_sub_state_to_string, |
| |
| .check_gc = service_check_gc, |
| .check_snapshot = service_check_snapshot, |
| |
| .sigchld_event = service_sigchld_event, |
| |
| .reset_failed = service_reset_failed, |
| |
| .notify_cgroup_empty = service_notify_cgroup_empty_event, |
| .notify_message = service_notify_message, |
| |
| .bus_name_owner_change = service_bus_name_owner_change, |
| |
| .bus_interface = "org.freedesktop.systemd1.Service", |
| .bus_vtable = bus_service_vtable, |
| .bus_set_property = bus_service_set_property, |
| .bus_commit_properties = bus_service_commit_properties, |
| |
| .get_timeout = service_get_timeout, |
| .can_transient = true, |
| |
| .status_message_formats = { |
| .starting_stopping = { |
| [0] = "Starting %s...", |
| [1] = "Stopping %s...", |
| }, |
| .finished_start_job = { |
| [JOB_DONE] = "Started %s.", |
| [JOB_FAILED] = "Failed to start %s.", |
| }, |
| .finished_stop_job = { |
| [JOB_DONE] = "Stopped %s.", |
| [JOB_FAILED] = "Stopped (with error) %s.", |
| }, |
| }, |
| }; |