| <?xml version='1.0'?> <!--*-nxml-*--> |
| <!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" |
| "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> |
| |
| <!-- |
| This file is part of systemd. |
| |
| Copyright 2010 Lennart Poettering |
| |
| systemd is free software; you can redistribute it and/or modify it |
| under the terms of the GNU Lesser General Public License as published by |
| the Free Software Foundation; either version 2.1 of the License, or |
| (at your option) any later version. |
| |
| systemd is distributed in the hope that it will be useful, but |
| WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| Lesser General Public License for more details. |
| |
| You should have received a copy of the GNU Lesser General Public License |
| along with systemd; If not, see <http://www.gnu.org/licenses/>. |
| --> |
| |
| <refentry id="systemd.special"> |
| |
| <refentryinfo> |
| <title>systemd.special</title> |
| <productname>systemd</productname> |
| |
| <authorgroup> |
| <author> |
| <contrib>Developer</contrib> |
| <firstname>Lennart</firstname> |
| <surname>Poettering</surname> |
| <email>lennart@poettering.net</email> |
| </author> |
| </authorgroup> |
| </refentryinfo> |
| |
| <refmeta> |
| <refentrytitle>systemd.special</refentrytitle> |
| <manvolnum>7</manvolnum> |
| </refmeta> |
| |
| <refnamediv> |
| <refname>systemd.special</refname> |
| <refpurpose>Special systemd units</refpurpose> |
| </refnamediv> |
| |
| <refsynopsisdiv> |
| <para><filename>basic.target</filename>, |
| <filename>bluetooth.target</filename>, |
| <filename>ctrl-alt-del.target</filename>, |
| <filename>cryptsetup.target</filename>, |
| <filename>cryptsetup-pre.target</filename>, |
| <filename>dbus.service</filename>, |
| <filename>dbus.socket</filename>, |
| <filename>default.target</filename>, |
| <filename>display-manager.service</filename>, |
| <filename>emergency.target</filename>, |
| <filename>exit.target</filename>, |
| <filename>final.target</filename>, |
| <filename>getty.target</filename>, |
| <filename>graphical.target</filename>, |
| <filename>halt.target</filename>, |
| <filename>hibernate.target</filename>, |
| <filename>hybrid-sleep.target</filename>, |
| <filename>initrd-fs.target</filename>, |
| <filename>kbrequest.target</filename>, |
| <filename>kexec.target</filename>, |
| <filename>local-fs.target</filename>, |
| <filename>local-fs-pre.target</filename>, |
| <filename>multi-user.target</filename>, |
| <filename>network.target</filename>, |
| <filename>network-online.target</filename>, |
| <filename>network-pre.target</filename>, |
| <filename>nss-lookup.target</filename>, |
| <filename>nss-user-lookup.target</filename>, |
| <filename>paths.target</filename>, |
| <filename>poweroff.target</filename>, |
| <filename>printer.target</filename>, |
| <filename>reboot.target</filename>, |
| <filename>remote-fs.target</filename>, |
| <filename>remote-fs-pre.target</filename>, |
| <filename>rescue.target</filename>, |
| <filename>initrd-root-fs.target</filename>, |
| <filename>rpcbind.target</filename>, |
| <filename>runlevel2.target</filename>, |
| <filename>runlevel3.target</filename>, |
| <filename>runlevel4.target</filename>, |
| <filename>runlevel5.target</filename>, |
| <filename>shutdown.target</filename>, |
| <filename>sigpwr.target</filename>, |
| <filename>sleep.target</filename>, |
| <filename>smartcard.target</filename>, |
| <filename>sockets.target</filename>, |
| <filename>sound.target</filename>, |
| <filename>suspend.target</filename>, |
| <filename>swap.target</filename>, |
| <filename>sysinit.target</filename>, |
| <filename>syslog.socket</filename>, |
| <filename>system-update.target</filename>, |
| <filename>time-sync.target</filename>, |
| <filename>timers.target</filename>, |
| <filename>umount.target</filename>, |
| <filename>-.slice</filename>, |
| <filename>system.slice</filename>, |
| <filename>user.slice</filename>, |
| <filename>machine.slice</filename></para> |
| </refsynopsisdiv> |
| |
| <refsect1> |
| <title>Description</title> |
| |
| <para>A few units are treated specially by systemd. They have |
| special internal semantics and cannot be renamed.</para> |
| </refsect1> |
| |
| <refsect1> |
| <title>Special System Units</title> |
| |
| <variablelist> |
| <varlistentry> |
| <term><filename>basic.target</filename></term> |
| <listitem> |
| <para>A special target unit covering basic boot-up.</para> |
| |
| <para>systemd automatically adds dependencies of the types |
| <varname>Requires=</varname> and <varname>After=</varname> |
| for this target unit to all services (except for those with |
| <varname>DefaultDependencies=no</varname>).</para> |
| |
| <para>Usually this should pull-in all mount points, swap |
| devices, sockets, timers, and path units and other basic |
| initialization necessary for general purpose daemons.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>ctrl-alt-del.target</filename></term> |
| <listitem> |
| <para>systemd starts this target whenever Control+Alt+Del is |
| pressed on the console. Usually this should be aliased |
| (symlinked) to <filename>reboot.target</filename>.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>cryptsetup.target</filename></term> |
| <listitem> |
| <para>A target that pulls in setup services for all |
| encrypted block devices.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>dbus.service</filename></term> |
| <listitem> |
| <para>A special unit for the D-Bus bus daemon. As soon as |
| this service is fully started up systemd will connect to it |
| and register its service.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>dbus.socket</filename></term> |
| <listitem> |
| <para>A special unit for the D-Bus system bus socket. All |
| units with <varname>Type=dbus</varname> automatically gain a |
| dependency on this unit.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>default.target</filename></term> |
| <listitem> |
| <para>The default unit systemd starts at bootup. Usually |
| this should be aliased (symlinked) to |
| <filename>multi-user.target</filename> or |
| <filename>graphical.target</filename>.</para> |
| |
| <para>The default unit systemd starts at bootup can be |
| overridden with the <varname>systemd.unit=</varname> kernel |
| command line option.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>display-manager.service</filename></term> |
| <listitem> |
| <para>The display manager service. Usually this should be |
| aliased (symlinked) to <filename>gdm.service</filename> or a |
| similar display manager service.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>emergency.target</filename></term> |
| <listitem> |
| <para>A special target unit that starts an emergency shell |
| on the main console. This unit is supposed to be used with |
| the kernel command line option |
| <varname>systemd.unit=</varname> and has otherwise little |
| use. |
| </para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>final.target</filename></term> |
| <listitem> |
| <para>A special target unit that is used during the shutdown |
| logic and may be used to pull in late services after all |
| normal services are already terminated and all mounts |
| unmounted. |
| </para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>getty.target</filename></term> |
| <listitem> |
| <para>A special target unit that pulls in statically |
| configured local TTY <filename>getty</filename> instances. |
| </para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>graphical.target</filename></term> |
| <listitem> |
| <para>A special target unit for setting up a graphical login |
| screen. This pulls in |
| <filename>multi-user.target</filename>.</para> |
| |
| <para>Units that are needed for graphical logins shall add |
| <varname>Wants=</varname> dependencies for their unit to |
| this unit (or <filename>multi-user.target</filename>) during |
| installation. This is best configured via |
| <varname>WantedBy=graphical.target</varname> in the unit's |
| <literal>[Install]</literal> section.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>hibernate.target</filename></term> |
| <listitem> |
| <para>A special target unit for hibernating the system. This |
| pulls in <filename>sleep.target</filename>.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>hybrid-sleep.target</filename></term> |
| <listitem> |
| <para>A special target unit for hibernating and suspending |
| the system at the same time. This pulls in |
| <filename>sleep.target</filename>.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>halt.target</filename></term> |
| <listitem> |
| <para>A special target unit for shutting down and halting |
| the system. Note that this target is distinct from |
| <filename>poweroff.target</filename> in that it generally |
| really just halts the system rather than powering it |
| down.</para> |
| |
| <para>Applications wanting to halt the system should start |
| this unit.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>initrd-fs.target</filename></term> |
| <listitem> |
| <para><citerefentry><refentrytitle>systemd-fstab-generator</refentrytitle><manvolnum>3</manvolnum></citerefentry> |
| automatically adds dependencies of type |
| <varname>Before=</varname> to |
| <filename>sysroot-usr.mount</filename> and all mount points |
| found in <filename>/etc/fstab</filename> that have |
| <option>x-initrd.mount</option> and not have |
| <option>noauto</option> mount options set.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>kbrequest.target</filename></term> |
| <listitem> |
| <para>systemd starts this target whenever Alt+ArrowUp is |
| pressed on the console. This is a good candidate to be |
| aliased (symlinked) to |
| <filename>rescue.target</filename>.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>kexec.target</filename></term> |
| <listitem> |
| <para>A special target unit for shutting down and rebooting |
| the system via kexec.</para> |
| |
| <para>Applications wanting to reboot the system with kexec |
| should start this unit.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>local-fs.target</filename></term> |
| <listitem> |
| <para><citerefentry><refentrytitle>systemd-fstab-generator</refentrytitle><manvolnum>3</manvolnum></citerefentry> |
| automatically adds dependencies of type |
| <varname>Before=</varname> to all mount units that refer to |
| local mount points for this target unit. In addition, it |
| adds dependencies of type <varname>Wants=</varname> to this |
| target unit for those mounts listed in |
| <filename>/etc/fstab</filename> that have the |
| <option>auto</option> mount option set.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>multi-user.target</filename></term> |
| <listitem> |
| <para>A special target unit for setting up a multi-user |
| system (non-graphical). This is pulled in by |
| <filename>graphical.target</filename>.</para> |
| |
| <para>Units that are needed for a multi-user system shall |
| add <varname>Wants=</varname> dependencies for their unit to |
| this unit during installation. This is best configured via |
| <varname>WantedBy=multi-user.target</varname> in the unit's |
| <literal>[Install]</literal> section.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>network-online.target</filename></term> |
| <listitem> |
| <para>Units that strictly require a configured network |
| connection should pull in |
| <filename>network-online.target</filename> (via a |
| <varname>Wants=</varname> type dependency) and order |
| themselves after it. This target unit is intended to pull in |
| a service that delays further execution until the network is |
| sufficiently set up. What precisely this requires is left to |
| the implementation of the network managing service.</para> |
| |
| <para>Note the distinction between this unit and |
| <filename>network.target</filename>. This unit is an active |
| unit (i.e. pulled in by the consumer rather than the |
| provider of this functionality) and pulls in a service which |
| possibly adds substantial delays to further execution. In |
| contrast, <filename>network.target</filename> is a passive |
| unit (i.e. pulled in by the provider of the functionality, |
| rather than the consumer) that usually does not delay |
| execution much. Usually, <filename>network.target</filename> |
| is part of the boot of most systems, while |
| <filename>network-online.target</filename> is not, except |
| when at least one unit requires it. Also see <ulink |
| url="http://www.freedesktop.org/wiki/Software/systemd/NetworkTarget">Running |
| Services After the Network is up</ulink> for more |
| information.</para> |
| |
| <para>All mount units for remote network file systems |
| automatically pull in this unit, and order themselves after |
| it. Note that networking daemons that simply provide |
| functionality to other hosts generally do not need to pull |
| this in.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>paths.target</filename></term> |
| <listitem> |
| <para>A special target unit that sets up all path units (see |
| <citerefentry><refentrytitle>systemd.path</refentrytitle><manvolnum>5</manvolnum></citerefentry> |
| for details) that shall be active after boot.</para> |
| |
| <para>It is recommended that path units installed by |
| applications get pulled in via <varname>Wants=</varname> |
| dependencies from this unit. This is best configured via a |
| <varname>WantedBy=paths.target</varname> in the path unit's |
| <literal>[Install]</literal> section.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>poweroff.target</filename></term> |
| <listitem> |
| <para>A special target unit for shutting down and powering |
| off the system.</para> |
| |
| <para>Applications wanting to power off the system should |
| start this unit.</para> |
| |
| <para><filename>runlevel0.target</filename> is an alias for |
| this target unit, for compatibility with SysV.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>reboot.target</filename></term> |
| <listitem> |
| <para>A special target unit for shutting down and rebooting |
| the system.</para> |
| |
| <para>Applications wanting to reboot the system should start |
| this unit.</para> |
| |
| <para><filename>runlevel6.target</filename> is an alias for |
| this target unit, for compatibility with SysV.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>remote-fs.target</filename></term> |
| <listitem> |
| <para>Similar to <filename>local-fs.target</filename>, but |
| for remote mount points.</para> |
| |
| <para>systemd automatically adds dependencies of type |
| <varname>After=</varname> for this target unit to all SysV |
| init script service units with an LSB header referring to |
| the <literal>$remote_fs</literal> facility.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>rescue.target</filename></term> |
| <listitem> |
| <para>A special target unit for setting up the base system |
| and a rescue shell.</para> |
| |
| <para><filename>runlevel1.target</filename> is an alias for |
| this target unit, for compatibility with SysV.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>initrd-root-fs.target</filename></term> |
| <listitem> |
| <para><citerefentry><refentrytitle>systemd-fstab-generator</refentrytitle><manvolnum>3</manvolnum></citerefentry> |
| automatically adds dependencies of type |
| <varname>Before=</varname> to the |
| <filename>sysroot.mount</filename> unit, which is generated |
| from the kernel command line. |
| </para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>runlevel2.target</filename></term> |
| <term><filename>runlevel3.target</filename></term> |
| <term><filename>runlevel4.target</filename></term> |
| <term><filename>runlevel5.target</filename></term> |
| <listitem> |
| <para>These are targets that are called whenever the SysV |
| compatibility code asks for runlevel 2, 3, 4, 5, |
| respectively. It is a good idea to make this an alias for |
| (i.e. symlink to) <filename>multi-user.target</filename> |
| (for runlevel 2) or <filename>graphical.target</filename> |
| (the others).</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>shutdown.target</filename></term> |
| <listitem> |
| <para>A special target unit that terminates the services on |
| system shutdown.</para> |
| |
| <para>Services that shall be terminated on system shutdown |
| shall add <varname>Conflicts=</varname> dependencies to this |
| unit for their service unit, which is implicitly done when |
| <varname>DefaultDependencies=yes</varname> is set (the |
| default).</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>sigpwr.target</filename></term> |
| <listitem> |
| <para>A special target that is started when systemd receives |
| the SIGPWR process signal, which is normally sent by the |
| kernel or UPS daemons when power fails.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>sleep.target</filename></term> |
| <listitem> |
| <para>A special target unit that is pulled in by |
| <filename>suspend.target</filename>, |
| <filename>hibernate.target</filename> and |
| <filename>hybrid-sleep.target</filename> and may be used to |
| hook units into the sleep state logic.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>sockets.target</filename></term> |
| <listitem> |
| <para>A special target unit that sets up all socket |
| units.(see |
| <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry> |
| for details) that shall be active after boot.</para> |
| |
| <para>Services that can be socket-activated shall add |
| <varname>Wants=</varname> dependencies to this unit for |
| their socket unit during installation. This is best |
| configured via a <varname>WantedBy=sockets.target</varname> |
| in the socket unit's <literal>[Install]</literal> |
| section.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>suspend.target</filename></term> |
| <listitem> |
| <para>A special target unit for suspending the system. This |
| pulls in <filename>sleep.target</filename>.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>swap.target</filename></term> |
| <listitem> |
| <para>Similar to <filename>local-fs.target</filename>, but |
| for swap partitions and swap files.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>sysinit.target</filename></term> |
| <listitem> |
| <para>A special target unit covering early boot-up |
| scripts.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>syslog.socket</filename></term> |
| <listitem> |
| <para>The socket unit syslog implementations should listen |
| on. All userspace log messages will be made available on |
| this socket. For more information about syslog integration, |
| please consult the <ulink |
| url="http://www.freedesktop.org/wiki/Software/systemd/syslog">Syslog |
| Interface</ulink> document.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>system-update.target</filename></term> |
| <listitem> |
| <para>A special target unit that is used for off-line system |
| updates. |
| <citerefentry><refentrytitle>systemd-system-update-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry> |
| will redirect the boot process to this target if |
| <filename>/system-update</filename> exists. For more |
| information see the <ulink |
| url="http://freedesktop.org/wiki/Software/systemd/SystemUpdates">System |
| Updates Specification</ulink>.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>timers.target</filename></term> |
| <listitem> |
| <para>A special target unit that sets up all timer units |
| (see |
| <citerefentry><refentrytitle>systemd.timer</refentrytitle><manvolnum>5</manvolnum></citerefentry> |
| for details) that shall be active after boot.</para> |
| |
| <para>It is recommended that timer units installed by |
| applications get pulled in via <varname>Wants=</varname> |
| dependencies from this unit. This is best configured via |
| <varname>WantedBy=timers.target</varname> in the timer |
| unit's <literal>[Install]</literal> section.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>umount.target</filename></term> |
| <listitem> |
| <para>A special target unit that umounts all mount and |
| automount points on system shutdown.</para> |
| |
| <para>Mounts that shall be unmounted on system shutdown |
| shall add Conflicts dependencies to this unit for their |
| mount unit, which is implicitly done when |
| <varname>DefaultDependencies=yes</varname> is set (the |
| default).</para> |
| </listitem> |
| </varlistentry> |
| |
| </variablelist> |
| </refsect1> |
| |
| <refsect1> |
| <title>Special System Units for Devices</title> |
| |
| <para>Some target units are automatically pulled in as devices of |
| certain kinds show up in the system. These may be used to |
| automatically activate various services based on the specific type |
| of the available hardware.</para> |
| |
| <variablelist> |
| <varlistentry> |
| <term><filename>bluetooth.target</filename></term> |
| <listitem> |
| <para>This target is started automatically as soon as a |
| Bluetooth controller is plugged in or becomes available at |
| boot.</para> |
| |
| <para>This may be used to pull in Bluetooth management |
| daemons dynamically when Bluetooth hardware is found.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>printer.target</filename></term> |
| <listitem> |
| <para>This target is started automatically as soon as a |
| printer is plugged in or becomes available at boot.</para> |
| |
| <para>This may be used to pull in printer management daemons |
| dynamically when printer hardware is found.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>smartcard.target</filename></term> |
| <listitem> |
| <para>This target is started automatically as soon as a |
| smartcard controller is plugged in or becomes available at |
| boot.</para> |
| |
| <para>This may be used to pull in smartcard management |
| daemons dynamically when smartcard hardware is found.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>sound.target</filename></term> |
| <listitem> |
| <para>This target is started automatically as soon as a |
| sound card is plugged in or becomes available at |
| boot.</para> |
| |
| <para>This may be used to pull in audio management daemons |
| dynamically when audio hardware is found.</para> |
| </listitem> |
| </varlistentry> |
| </variablelist> |
| </refsect1> |
| |
| <refsect1> |
| <title>Special Passive System Units </title> |
| |
| <para>A number of special system targets are defined that can be |
| used to properly order boot-up of optional services. These targets |
| are generally not part of the initial boot transaction, unless |
| they are explicitly pulled in by one of the implementing services. |
| Note specifically that these <emphasis>passive</emphasis> target |
| units are generally not pulled in by the consumer of a service, |
| but by the provider of the service. This means: a consuming |
| service should order itself after these targets (as appropriate), |
| but not pull it in. A providing service should order itself before |
| these targets (as appropriate) and pull it in (via a |
| <varname>Wants=</varname> type dependency).</para> |
| |
| <para>Note that these passive units cannot be started manually, |
| i.e. <literal>systemctl start time-sync.target</literal> will fail |
| with an error. They can only be pulled in by dependency. This is |
| enforced since they exist for ordering purposes only and thus are |
| not useful as only unit within a transaction.</para> |
| |
| <variablelist> |
| <varlistentry> |
| <term><filename>cryptsetup-pre.target</filename></term> |
| <listitem> |
| <para>This passive target unit may be pulled in by services |
| that want to run before any encrypted block device is set |
| up. All encrypted block devices are set up after this target |
| has been reached. Since the shutdown order is implicitly the |
| reverse start-up order between units, this target is |
| particularly useful to ensure that a service is shut down |
| only after all encrypted block devices are fully |
| stopped.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>local-fs-pre.target</filename></term> |
| <listitem> |
| <para>This target unit is |
| automatically ordered before |
| all local mount points marked |
| with <option>auto</option> |
| (see above). It can be used to |
| execute certain units before |
| all local mounts.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>network.target</filename></term> |
| <listitem> |
| <para>This unit is supposed to indicate when network |
| functionality is available, but it is only very weakly |
| defined what that is supposed to mean, with one exception: |
| at shutdown, a unit that is ordered after |
| <filename>network.target</filename> will be stopped before |
| the network -- to whatever level it might be set up then -- |
| is shut down. It is hence useful when writing service files |
| that require network access on shutdown, which should order |
| themselves after this target, but not pull it in. Also see |
| <ulink url="http://www.freedesktop.org/wiki/Software/systemd/NetworkTarget">Running |
| Services After the Network is up</ulink> for more |
| information. Also see |
| <filename>network-online.target</filename> described |
| above.</para> |
| |
| <para>systemd automatically adds dependencies of type |
| <varname>After=</varname> for this target unit to all SysV |
| init script service units with an LSB header referring to |
| the <literal>$network</literal> facility.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>network-pre.target</filename></term> |
| <listitem> |
| <para>This passive target unit may be pulled in by services |
| that want to run before any network is set up, for example |
| for the purpose of setting up a firewall. All network |
| management software orders itself after this target, but |
| does not pull it in.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>nss-lookup.target</filename></term> |
| <listitem> |
| <para>A target that should be used as synchronization point |
| for all host/network name service lookups. Note that this is |
| independent of user/group name lookups for which |
| <filename>nss-user-lookup.target</filename> should be used. |
| All services for which the availability of full host/network |
| name resolution is essential should be ordered after this |
| target, but not pull it in. systemd automatically adds |
| dependencies of type <varname>After=</varname> for this |
| target unit to all SysV init script service units with an |
| LSB header referring to the <literal>$named</literal> |
| facility.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>nss-user-lookup.target</filename></term> |
| <listitem> |
| <para>A target that should be used as synchronization point |
| for all user/group name service lookups. Note that this is |
| independent of host/network name lookups for which |
| <filename>nss-lookup.target</filename> should be used. All |
| services for which the availability of the full user/group |
| database is essential should be ordered after this target, |
| but not pull it in. Note that system users are always |
| resolvable, and hence do not require any special ordering |
| against this target.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>remote-fs-pre.target</filename></term> |
| <listitem> |
| <para>This target unit is automatically ordered before all |
| remote mount point units (see above). It can be used to run |
| certain units before the remote mounts are established. Note |
| that this unit is generally not part of the initial |
| transaction, unless the unit that wants to be ordered before |
| all remote mounts pulls it in via a |
| <varname>Wants=</varname> type dependency. If the unit wants |
| to be pulled in by the first remote mount showing up, it |
| should use <filename>network-online.target</filename> (see |
| above).</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>rpcbind.target</filename></term> |
| <listitem> |
| <para>The portmapper/rpcbind pulls in this target and orders |
| itself before it, to indicate its availability. systemd |
| automatically adds dependencies of type |
| <varname>After=</varname> for this target unit to all SysV |
| init script service units with an LSB header referring to |
| the <literal>$portmap</literal> facility.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><filename>time-sync.target</filename></term> |
| <listitem> |
| <para>Services responsible for synchronizing the system |
| clock from a remote source (such as NTP client |
| implementations) should pull in this target and order |
| themselves before it. All services where correct time is |
| essential should be ordered after this unit, but not pull it |
| in. systemd automatically adds dependencies of type |
| <varname>After=</varname> for this target unit to all SysV |
| init script service units with an LSB header referring to |
| the <literal>$time</literal> facility. </para> |
| </listitem> |
| </varlistentry> |
| </variablelist> |
| </refsect1> |
| |
| <refsect1> |
| <title>Special User Units</title> |
| |
| <para>When systemd runs as a user instance, the following special |
| units are available, which have similar definitions as their |
| system counterparts: |
| <filename>default.target</filename>, |
| <filename>shutdown.target</filename>, |
| <filename>sockets.target</filename>, |
| <filename>timers.target</filename>, |
| <filename>paths.target</filename>, |
| <filename>bluetooth.target</filename>, |
| <filename>printer.target</filename>, |
| <filename>smartcard.target</filename>, |
| <filename>sound.target</filename>.</para> |
| |
| <para>In addition, the following special unit is understood only |
| when systemd runs as service instance:</para> |
| |
| <variablelist> |
| <varlistentry> |
| <term><filename>exit.target</filename></term> |
| <listitem> |
| <para>A special service unit for shutting down the user |
| service manager.</para> |
| |
| <para>Applications wanting to terminate the user service |
| manager should start this unit. If systemd receives |
| <constant>SIGTERM</constant> or <constant>SIGINT</constant> |
| when running as user service daemon, it will start this |
| unit.</para> |
| |
| <para>Normally, this pulls in |
| <filename>shutdown.target</filename> which in turn should be |
| conflicted by all units that want to be shut down on user |
| service manager exit.</para> |
| </listitem> |
| </varlistentry> |
| </variablelist> |
| </refsect1> |
| |
| <refsect1> |
| <title>Special Slice Units</title> |
| |
| <para>There are four <literal>.slice</literal> units which form |
| the basis of the hierarchy for assignment of resources for |
| services, users, and virtual machines or containers.</para> |
| |
| <variablelist> |
| <varlistentry> |
| <term><filename>-.slice</filename></term> |
| <listitem> |
| <para>The root slice is the root of the hierarchy. It |
| usually does not contain units directly, but may be used to |
| set defaults for the whole tree.</para> |
| </listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><filename>system.slice</filename></term> |
| <listitem> |
| <para>By default, all services services started by |
| <command>systemd</command> are found in this slice.</para> |
| </listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><filename>user.slice</filename></term> |
| <listitem> |
| <para>By default, all user processes and services started on |
| behalf of the user, including the per-user systemd instance |
| are found in this slice.</para> |
| </listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><filename>machine.slice</filename></term> |
| <listitem> |
| <para>By default, all virtual machines and containers |
| registered with <command>systemd-machined</command> are |
| found in this slice. |
| </para> |
| </listitem> |
| </varlistentry> |
| </variablelist> |
| </refsect1> |
| |
| <refsect1> |
| <title>See Also</title> |
| <para> |
| <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, |
| <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>, |
| <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>, |
| <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>, |
| <citerefentry><refentrytitle>systemd.target</refentrytitle><manvolnum>5</manvolnum></citerefentry>, |
| <citerefentry><refentrytitle>systemd.slice</refentrytitle><manvolnum>5</manvolnum></citerefentry>, |
| <citerefentry project='man-pages'><refentrytitle>bootup</refentrytitle><manvolnum>7</manvolnum></citerefentry>, |
| <citerefentry><refentrytitle>systemd-fstab-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry> |
| </para> |
| </refsect1> |
| |
| </refentry> |