Rivoreo Source Code Repositories
src.rivoreo.one / systemd-stable / v216 / . / src / libsystemd-terminal / term-screen.c
blob: a19c684d2ad6c040dd610dd18d5d915ebc2d1943 [file] [log] [blame] [raw]
/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
/***
This file is part of systemd.
Copyright (C) 2014 David Herrmann <dh.herrmann@gmail.com>
systemd is free software; you can redistribute it and/or modify it
under the terms of the GNU Lesser General Public License as published by
the Free Software Foundation; either version 2.1 of the License, or
(at your option) any later version.
systemd is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public License
along with systemd; If not, see <http://www.gnu.org/licenses/>.
***/
/*
* Terminal Screens
* The term_screen layer implements the terminal-side. It handles all commands
* returned by the seq-parser and applies them to its own pages.
*
* While there are a lot of legacy control-sequences, we only support a small
* subset. There is no reason to implement unused codes like horizontal
* scrolling.
* If you implement new commands, make sure to document them properly.
*
* Standards:
* ECMA-48
* ANSI X3.64
* ISO/IEC 6429
* References:
* http://www.vt100.net/emu/ctrlseq_dec.html
* http://www.vt100.net/docs/vt100-ug/chapter3.html
* http://www.vt100.net/docs/vt510-rm/chapter4
* http://www.vt100.net/docs/vt510-rm/contents
* http://invisible-island.net/xterm/ctlseqs/ctlseqs.html
* ASCII
* http://en.wikipedia.org/wiki/C0_and_C1_control_codes
* https://en.wikipedia.org/wiki/ANSI_color
*/
#include <stdbool.h>
#include <stdint.h>
#include <stdlib.h>
#include "macro.h"
#include "term-internal.h"
#include "util.h"
int term_screen_new(term_screen **out, term_screen_write_fn write_fn, void *write_fn_data, term_screen_cmd_fn cmd_fn, void *cmd_fn_data) {
_cleanup_(term_screen_unrefp) term_screen *screen = NULL;
int r;
assert_return(out, -EINVAL);
screen = new0(term_screen, 1);
if (!screen)
return -ENOMEM;
screen->ref = 1;
screen->age = 1;
screen->write_fn = write_fn;
screen->write_fn_data = write_fn_data;
screen->cmd_fn = cmd_fn;
screen->cmd_fn_data = cmd_fn_data;
screen->flags = TERM_FLAG_7BIT_MODE;
screen->conformance_level = TERM_CONFORMANCE_LEVEL_VT400;
screen->gl = &screen->g0;
screen->gr = &screen->g1;
screen->g0 = &term_unicode_lower;
screen->g1 = &term_unicode_upper;
screen->g2 = &term_unicode_lower;
screen->g3 = &term_unicode_upper;
screen->saved.cursor_x = 0;
screen->saved.cursor_y = 0;
screen->saved.attr = screen->attr;
screen->saved.gl = screen->gl;
screen->saved.gr = screen->gr;
r = term_page_new(&screen->page_main);
if (r < 0)
return r;
r = term_page_new(&screen->page_alt);
if (r < 0)
return r;
r = term_parser_new(&screen->parser, false);
if (r < 0)
return r;
r = term_history_new(&screen->history_main);
if (r < 0)
return r;
screen->page = screen->page_main;
screen->history = screen->history_main;
*out = screen;
screen = NULL;
return 0;
}
term_screen *term_screen_ref(term_screen *screen) {
if (!screen)
return NULL;
assert_return(screen->ref > 0, NULL);
++screen->ref;
return screen;
}
term_screen *term_screen_unref(term_screen *screen) {
if (!screen)
return NULL;
assert_return(screen->ref > 0, NULL);
if (--screen->ref)
return NULL;
free(screen->answerback);
free(screen->tabs);
term_history_free(screen->history_main);
term_page_free(screen->page_alt);
term_page_free(screen->page_main);
term_parser_free(screen->parser);
free(screen);
return NULL;
}
/*
* Write-Helpers
* Unfortunately, 7bit/8bit compat mode requires us to send C1 controls encoded
* as 7bit if asked by the application. This is really used in the wild, so we
* cannot fall back to "always 7bit".
* screen_write() is the underlying backend which forwards any writes to the
* users's callback. It's the users responsibility to buffer these and write
* them out once their call to term_screen_feed_*() returns.
* The SEQ_WRITE() and SEQ_WRITE_KEY() macros allow constructing C0/C1 sequences
* directly in the code-base without requiring any intermediate buffer during
* runtime.
*/
#define C0_CSI "\e["
#define C1_CSI "\x9b"
#define SEQ(_screen, _prefix_esc, _c0, _c1, _seq) \
(((_screen)->flags & TERM_FLAG_7BIT_MODE) ? \
((_prefix_esc) ? ("\e" _c0 _seq) : (_c0 _seq)) : \
((_prefix_esc) ? ("\e" _c1 _seq) : (_c1 _seq)))
#define SEQ_SIZE(_screen, _prefix_esc, _c0, _c1, _seq) \
(((_screen)->flags & TERM_FLAG_7BIT_MODE) ? \
((_prefix_esc) ? sizeof("\e" _c0 _seq) : sizeof(_c0 _seq)) : \
((_prefix_esc) ? sizeof("\e" _c1 _seq) : sizeof(_c1 _seq)))
#define SEQ_WRITE_KEY(_screen, _prefix_esc, _c0, _c1, _seq) \
screen_write((_screen), \
SEQ((_screen), (_prefix_esc), \
_c0, _c1, _seq), \
SEQ_SIZE((_screen), (_prefix_esc), \
_c0, _c1, _seq) - 1)
#define SEQ_WRITE(_screen, _c0, _c1, _seq) \
SEQ_WRITE_KEY((_screen), false, _c0, _c1, _seq)
static int screen_write(term_screen *screen, const void *buf, size_t len) {
if (len < 1 || !screen->write_fn)
return 0;
return screen->write_fn(screen, screen->write_fn_data, buf, len);
}
/*
* Command Forwarding
* Some commands cannot be handled by the screen-layer directly. Those are
* forwarded to the command-handler of the caller. This is rarely used and can
* safely be set to NULL.
*/
static int screen_forward(term_screen *screen, unsigned int cmd, const term_seq *seq) {
if (!screen->cmd_fn)
return 0;
return screen->cmd_fn(screen, screen->cmd_fn_data, cmd, seq);
}
/*
* Screen Helpers
* These helpers implement common-operations like cursor-handler and more, which
* are used by several command dispatchers.
*/
static unsigned int screen_clamp_x(term_screen *screen, unsigned int x) {
if (x >= screen->page->width)
return (screen->page->width > 0) ? screen->page->width - 1 : 0;
return x;
}
static unsigned int screen_clamp_y(term_screen *screen, unsigned int y) {
if (y >= screen->page->height)
return (screen->page->height > 0) ? screen->page->height - 1 : 0;
return y;
}
static bool screen_tab_is_set(term_screen *screen, unsigned int pos) {
if (pos >= screen->page->width)
return false;
return screen->tabs[pos / 8] & (1 << (pos % 8));
}
static inline void screen_age_cursor(term_screen *screen) {
term_cell *cell;
cell = term_page_get_cell(screen->page, screen->cursor_x, screen->cursor_y);
if (cell)
cell->age = screen->age;
}
static void screen_cursor_clear_wrap(term_screen *screen) {
screen->flags &= ~TERM_FLAG_PENDING_WRAP;
}
static void screen_cursor_set(term_screen *screen, unsigned int x, unsigned int y) {
x = screen_clamp_x(screen, x);
y = screen_clamp_y(screen, y);
if (x == screen->cursor_x && y == screen->cursor_y)
return;
if (!(screen->flags & TERM_FLAG_HIDE_CURSOR))
screen_age_cursor(screen);
screen->cursor_x = x;
screen->cursor_y = y;
if (!(screen->flags & TERM_FLAG_HIDE_CURSOR))
screen_age_cursor(screen);
}
static void screen_cursor_set_rel(term_screen *screen, unsigned int x, unsigned int y) {
if (screen->flags & TERM_FLAG_ORIGIN_MODE) {
x = screen_clamp_x(screen, x);
y = screen_clamp_x(screen, y) + screen->page->scroll_idx;
if (y >= screen->page->scroll_idx + screen->page->scroll_num) {
y = screen->page->scroll_idx + screen->page->scroll_num;
if (screen->page->scroll_num > 0)
y -= 1;
}
}
screen_cursor_set(screen, x, y);
}
static void screen_cursor_left(term_screen *screen, unsigned int num) {
if (num > screen->cursor_x)
num = screen->cursor_x;
screen_cursor_set(screen, screen->cursor_x - num, screen->cursor_y);
}
static void screen_cursor_left_tab(term_screen *screen, unsigned int num) {
unsigned int i;
i = screen->cursor_x;
while (i > 0 && num > 0) {
if (screen_tab_is_set(screen, --i))
--num;
}
screen_cursor_set(screen, i, screen->cursor_y);
}
static void screen_cursor_right(term_screen *screen, unsigned int num) {
if (num > screen->page->width)
num = screen->page->width;
screen_cursor_set(screen, screen->cursor_x + num, screen->cursor_y);
}
static void screen_cursor_right_tab(term_screen *screen, unsigned int num) {
unsigned int i;
i = screen->cursor_x;
while (i + 1 < screen->page->width && num > 0) {
if (screen_tab_is_set(screen, ++i))
--num;
}
screen_cursor_set(screen, i, screen->cursor_y);
}
static void screen_cursor_up(term_screen *screen, unsigned int num, bool scroll) {
unsigned int max;
if (screen->cursor_y < screen->page->scroll_idx) {
if (num > screen->cursor_y)
num = screen->cursor_y;
screen_cursor_set(screen, screen->cursor_x, screen->cursor_y - num);
} else {
max = screen->cursor_y - screen->page->scroll_idx;
if (num > max) {
if (num < 1)
return;
if (!(screen->flags & TERM_FLAG_HIDE_CURSOR))
screen_age_cursor(screen);
if (scroll)
term_page_scroll_down(screen->page, num - max, &screen->attr, screen->age, NULL);
screen->cursor_y = screen->page->scroll_idx;
if (!(screen->flags & TERM_FLAG_HIDE_CURSOR))
screen_age_cursor(screen);
} else {
screen_cursor_set(screen, screen->cursor_x, screen->cursor_y - num);
}
}
}
static void screen_cursor_down(term_screen *screen, unsigned int num, bool scroll) {
unsigned int max;
if (screen->cursor_y >= screen->page->scroll_idx + screen->page->scroll_num) {
if (num > screen->page->height)
num = screen->page->height;
screen_cursor_set(screen, screen->cursor_x, screen->cursor_y - num);
} else {
max = screen->page->scroll_idx + screen->page->scroll_num - 1 - screen->cursor_y;
if (num > max) {
if (num < 1)
return;
if (!(screen->flags & TERM_FLAG_HIDE_CURSOR))
screen_age_cursor(screen);
if (scroll)
term_page_scroll_up(screen->page, num - max, &screen->attr, screen->age, screen->history);
screen->cursor_y = screen->page->scroll_idx + screen->page->scroll_num - 1;
if (!(screen->flags & TERM_FLAG_HIDE_CURSOR))
screen_age_cursor(screen);
} else {
screen_cursor_set(screen, screen->cursor_x, screen->cursor_y + num);
}
}
}
static inline void set_reset(term_screen *screen, unsigned int flag, bool set) {
if (set)
screen->flags |= flag;
else
screen->flags &= ~flag;
}
static void screen_mode_change(term_screen *screen, unsigned int mode, bool dec, bool set) {
switch (mode) {
case 1:
if (dec) {
/*
* DECCKM: cursor-keys
* TODO
*/
set_reset(screen, TERM_FLAG_CURSOR_KEYS, set);
}
break;
case 6:
if (dec) {
/*
* DECOM: origin-mode
* TODO
*/
set_reset(screen, TERM_FLAG_ORIGIN_MODE, set);
}
break;
case 7:
if (dec) {
/*
* DECAWN: auto-wrap mode
* TODO
*/
set_reset(screen, TERM_FLAG_AUTO_WRAP, set);
}
break;
case 20:
if (!dec) {
/*
* LNM: line-feed/new-line mode
* TODO
*/
set_reset(screen, TERM_FLAG_NEWLINE_MODE, set);
}
break;
case 25:
if (dec) {
/*
* DECTCEM: text-cursor-enable
* TODO
*/
set_reset(screen, TERM_FLAG_HIDE_CURSOR, !set);
}
break;
}
}
/* map a character according to current GL and GR maps */
static uint32_t screen_map(term_screen *screen, uint32_t val) {
uint32_t nval = -1U;
/* 32 and 127 always map to identity. 160 and 255 map to identity iff a
* 96 character set is loaded into GR. Values above 255 always map to
* identity. */
switch (val) {
case 33 ... 126:
if (screen->glt) {
nval = (**screen->glt)[val - 32];
screen->glt = NULL;
} else {
nval = (**screen->gl)[val - 32];
}
break;
case 160 ... 255:
if (screen->grt) {
nval = (**screen->grt)[val - 160];
screen->grt = NULL;
} else {
nval = (**screen->gr)[val - 160];
}
break;
}
return (nval == -1U) ? val : nval;
}
/*
* Command Handlers
* This is the inofficial documentation of all the TERM_CMD_* definitions. Each
* handled command has a separate function with an extensive comment on the
* semantics of the command.
* Note that many semantics are unknown and need to be verified. This is mostly
* about error-handling, though. Applications rarely rely on those features.
*/
static int screen_DA1(term_screen *screen, const term_seq *seq);
static int screen_LF(term_screen *screen, const term_seq *seq);
static int screen_GRAPHIC(term_screen *screen, const term_seq *seq) {
term_char_t ch = TERM_CHAR_NULL;
uint32_t c;
if (screen->cursor_x + 1 == screen->page->width
&& screen->flags & TERM_FLAG_PENDING_WRAP
&& screen->flags & TERM_FLAG_AUTO_WRAP) {
screen_cursor_down(screen, 1, true);
screen_cursor_set(screen, 0, screen->cursor_y);
}
screen_cursor_clear_wrap(screen);
c = screen_map(screen, seq->terminator);
ch = term_char_merge(ch, screen_map(screen, c));
term_page_write(screen->page, screen->cursor_x, screen->cursor_y, ch, 1, &screen->attr, screen->age, false);
if (screen->cursor_x + 1 == screen->page->width)
screen->flags |= TERM_FLAG_PENDING_WRAP;
else
screen_cursor_right(screen, 1);
return 0;
}
static int screen_BEL(term_screen *screen, const term_seq *seq) {
/*
* BEL - sound bell tone
* This command should trigger an acoustic bell. Usually, this is
* forwarded directly to the pcspkr. However, bells have become quite
* uncommon and annoying, so we're not implementing them here. Instead,
* it's one of the commands we forward to the caller.
*/
return screen_forward(screen, TERM_CMD_BEL, seq);
}
static int screen_BS(term_screen *screen, const term_seq *seq) {
/*
* BS - backspace
* Move cursor one cell to the left. If already at the left margin,
* nothing happens.
*/
screen_cursor_clear_wrap(screen);
screen_cursor_left(screen, 1);
return 0;
}
static int screen_CBT(term_screen *screen, const term_seq *seq) {
/*
* CBT - cursor-backward-tabulation
* Move the cursor @args[0] tabs backwards (to the left). The
* current cursor cell, in case it's a tab, is not counted.
* Furthermore, the cursor cannot be moved beyond position 0 and
* it will stop there.
*
* Defaults:
* args[0]: 1
*/
unsigned int num = 1;
if (seq->args[0] > 0)
num = seq->args[0];
screen_cursor_clear_wrap(screen);
screen_cursor_left_tab(screen, num);
return 0;
}
static int screen_CHA(term_screen *screen, const term_seq *seq) {
/*
* CHA - cursor-horizontal-absolute
* Move the cursor to position @args[0] in the current line. The
* cursor cannot be moved beyond the rightmost cell and will stop
* there.
*
* Defaults:
* args[0]: 1
*/
unsigned int pos = 1;
if (seq->args[0] > 0)
pos = seq->args[0];
screen_cursor_clear_wrap(screen);
screen_cursor_set(screen, pos - 1, screen->cursor_y);
return 0;
}
static int screen_CHT(term_screen *screen, const term_seq *seq) {
/*
* CHT - cursor-horizontal-forward-tabulation
* Move the cursor @args[0] tabs forward (to the right). The
* current cursor cell, in case it's a tab, is not counted.
* Furthermore, the cursor cannot be moved beyond the rightmost cell
* and will stop there.
*
* Defaults:
* args[0]: 1
*/
unsigned int num = 1;
if (seq->args[0] > 0)
num = seq->args[0];
screen_cursor_clear_wrap(screen);
screen_cursor_right_tab(screen, num);
return 0;
}
static int screen_CNL(term_screen *screen, const term_seq *seq) {
/*
* CNL - cursor-next-line
* Move the cursor @args[0] lines down.
*
* TODO: Does this stop at the bottom or cause a scroll-up?
*
* Defaults:
* args[0]: 1
*/
unsigned int num = 1;
if (seq->args[0] > 0)
num = seq->args[0];
screen_cursor_clear_wrap(screen);
screen_cursor_down(screen, num, false);
return 0;
}
static int screen_CPL(term_screen *screen, const term_seq *seq) {
/*
* CPL - cursor-preceding-line
* Move the cursor @args[0] lines up.
*
* TODO: Does this stop at the top or cause a scroll-up?
*
* Defaults:
* args[0]: 1
*/
unsigned int num = 1;
if (seq->args[0] > 0)
num = seq->args[0];
screen_cursor_clear_wrap(screen);
screen_cursor_up(screen, num, false);
return 0;
}
static int screen_CR(term_screen *screen, const term_seq *seq) {
/*
* CR - carriage-return
* Move the cursor to the left margin on the current line.
*/
screen_cursor_clear_wrap(screen);
screen_cursor_set(screen, 0, screen->cursor_y);
return 0;
}
static int screen_CUB(term_screen *screen, const term_seq *seq) {
/*
* CUB - cursor-backward
* Move the cursor @args[0] positions to the left. The cursor stops
* at the left-most position.
*
* Defaults:
* args[0]: 1
*/
unsigned int num = 1;
if (seq->args[0] > 0)
num = seq->args[0];
screen_cursor_clear_wrap(screen);
screen_cursor_left(screen, num);
return 0;
}
static int screen_CUD(term_screen *screen, const term_seq *seq) {
/*
* CUD - cursor-down
* Move the cursor @args[0] positions down. The cursor stops at the
* bottom margin. If it was already moved further, it stops at the
* bottom line.
*
* Defaults:
* args[0]: 1
*/
unsigned int num = 1;
if (seq->args[0] > 0)
num = seq->args[0];
screen_cursor_clear_wrap(screen);
screen_cursor_down(screen, num, false);
return 0;
}
static int screen_CUF(term_screen *screen, const term_seq *seq) {
/*
* CUF -cursor-forward
* Move the cursor @args[0] positions to the right. The cursor stops
* at the right-most position.
*
* Defaults:
* args[0]: 1
*/
unsigned int num = 1;
if (seq->args[0] > 0)
num = seq->args[0];
screen_cursor_clear_wrap(screen);
screen_cursor_right(screen, num);
return 0;
}
static int screen_CUP(term_screen *screen, const term_seq *seq) {
/*
* CUP - cursor-position
* Moves the cursor to position @args[1] x @args[0]. If either is 0, it
* is treated as 1. The positions are subject to the origin-mode and
* clamped to the addressable with/height.
*
* Defaults:
* args[0]: 1
* args[1]: 1
*/
unsigned int x = 1, y = 1;
if (seq->args[0] > 0)
y = seq->args[0];
if (seq->args[1] > 0)
x = seq->args[1];
screen_cursor_clear_wrap(screen);
screen_cursor_set_rel(screen, x - 1, y - 1);
return 0;
}
static int screen_CUU(term_screen *screen, const term_seq *seq) {
/*
* CUU - cursor-up
* Move the cursor @args[0] positions up. The cursor stops at the
* top margin. If it was already moved further, it stops at the
* top line.
*
* Defaults:
* args[0]: 1
*
*/
unsigned int num = 1;
if (seq->args[0] > 0)
num = seq->args[0];
screen_cursor_clear_wrap(screen);
screen_cursor_up(screen, num, false);
return 0;
}
static int screen_DA1(term_screen *screen, const term_seq *seq) {
/*
* DA1 - primary-device-attributes
* The primary DA asks for basic terminal features. We simply return
* a hard-coded list of features we implement.
* Note that the primary DA asks for supported features, not currently
* enabled features.
*
* The terminal's answer is:
* ^[ ? 64 ; ARGS c
* The first argument, 64, is fixed and denotes a VT420, the last
* DEC-term that extended this number.
* All following arguments denote supported features. Note
* that at most 15 features can be sent (max CSI args). It is safe to
* send more, but clients might not be able to parse them. This is a
* client's problem and we shouldn't care. There is no other way to
* send those feature lists, so we have to extend them beyond 15 in
* those cases.
*
* Known modes:
* 1: 132 column mode
* The 132 column mode is supported by the terminal.
* 2: printer port
* A priner-port is supported and can be addressed via
* control-codes.
* 3: ReGIS graphics
* Support for ReGIS graphics is available. The ReGIS routines
* provide the "remote graphics instruction set" and allow basic
* vector-rendering.
* 4: sixel
* Support of Sixel graphics is available. This provides access
* to the sixel bitmap routines.
* 6: selective erase
* The terminal supports DECSCA and related selective-erase
* functions. This allows to protect specific cells from being
* erased, if specified.
* 7: soft character set (DRCS)
* TODO: ?
* 8: user-defined keys (UDKs)
* TODO: ?
* 9: national-replacement character sets (NRCS)
* National-replacement character-sets are available.
* 12: Yugoslavian (SCS)
* TODO: ?
* 15: technical character set
* The DEC technical-character-set is available.
* 18: windowing capability
* TODO: ?
* 21: horizontal scrolling
* TODO: ?
* 22: ANSII color
* TODO: ?
* 23: Greek
* TODO: ?
* 24: Turkish
* TODO: ?
* 29: ANSI text locator
* TODO: ?
* 42: ISO Latin-2 character set
* TODO: ?
* 44: PCTerm
* TODO: ?
* 45: soft keymap
* TODO: ?
* 46: ASCII emulation
* TODO: ?
*/
return SEQ_WRITE(screen, C0_CSI, C1_CSI, "?64;1;6;9;15c");
}
static int screen_DA2(term_screen *screen, const term_seq *seq) {
/*
* DA2 - secondary-device-attributes
* The secondary DA asks for the terminal-ID, firmware versions and
* other non-primary attributes. All these values are
* informational-only and should not be used by the host to detect
* terminal features.
*
* The terminal's response is:
* ^[ > 61 ; FIRMWARE ; KEYBOARD c
* whereas 65 is fixed for VT525 terminals, the last terminal-line that
* increased this number. FIRMWARE is the firmware
* version encoded as major/minor (20 == 2.0) and KEYBOARD is 0 for STD
* keyboard and 1 for PC keyboards.
*
* We replace the firmware-version with the systemd-version so clients
* can decode it again.
*/
return SEQ_WRITE(screen, C0_CSI, C1_CSI, ">65;" PACKAGE_VERSION ";1c");
}
static int screen_DA3(term_screen *screen, const term_seq *seq) {
/*
* DA3 - tertiary-device-attributes
* The tertiary DA is used to query the terminal-ID.
*
* The terminal's response is:
* ^P ! | XX AA BB CC ^\
* whereas all four parameters are hexadecimal-encoded pairs. XX
* denotes the manufacturing site, AA BB CC is the terminal's ID.
*/
/* we do not support tertiary DAs */
return 0;
}
static int screen_DC1(term_screen *screen, const term_seq *seq) {
/*
* DC1 - device-control-1 or XON
* This clears any previous XOFF and resumes terminal-transmission.
*/
/* we do not support XON */
return 0;
}
static int screen_DC3(term_screen *screen, const term_seq *seq) {
/*
* DC3 - device-control-3 or XOFF
* Stops terminal transmission. No further characters are sent until
* an XON is received.
*/
/* we do not support XOFF */
return 0;
}
static int screen_DCH(term_screen *screen, const term_seq *seq) {
/*
* DCH - delete-character
* This deletes @argv[0] characters at the current cursor position. As
* characters are deleted, the remaining characters between the cursor
* and right margin move to the left. Character attributes move with the
* characters. The terminal adds blank spaces with no visual character
* attributes at the right margin. DCH has no effect outside the
* scrolling margins.
*
* Defaults:
* args[0]: 1
*/
unsigned int num = 1;
if (seq->args[0] > 0)
num = seq->args[0];
screen_cursor_clear_wrap(screen);
term_page_delete_cells(screen->page, screen->cursor_x, screen->cursor_y, num, &screen->attr, screen->age);
return 0;
}
static int screen_DECALN(term_screen *screen, const term_seq *seq) {
/*
* DECALN - screen-alignment-pattern
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECANM(term_screen *screen, const term_seq *seq) {
/*
* DECANM - ansi-mode
* Set the terminal into VT52 compatibility mode. Control sequences
* overlap with regular sequences so we have to detect them early before
* dispatching them.
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECBI(term_screen *screen, const term_seq *seq) {
/*
* DECBI - back-index
* This control function moves the cursor backward one column. If the
* cursor is at the left margin, then all screen data within the margin
* moves one column to the right. The column that shifted past the right
* margin is lost.
* DECBI adds a new column at the left margin with no visual attributes.
* DECBI does not affect the margins. If the cursor is beyond the
* left-margin at the left border, then the terminal ignores DECBI.
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECCARA(term_screen *screen, const term_seq *seq) {
/*
* DECCARA - change-attributes-in-rectangular-area
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECCRA(term_screen *screen, const term_seq *seq) {
/*
* DECCRA - copy-rectangular-area
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECDC(term_screen *screen, const term_seq *seq) {
/*
* DECDC - delete-column
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECDHL_BH(term_screen *screen, const term_seq *seq) {
/*
* DECDHL_BH - double-width-double-height-line: bottom half
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECDHL_TH(term_screen *screen, const term_seq *seq) {
/*
* DECDHL_TH - double-width-double-height-line: top half
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECDWL(term_screen *screen, const term_seq *seq) {
/*
* DECDWL - double-width-single-height-line
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECEFR(term_screen *screen, const term_seq *seq) {
/*
* DECEFR - enable-filter-rectangle
* Defines the coordinates of a filter rectangle (top, left, bottom,
* right as @args[0] to @args[3]) and activates it.
* Anytime the locator is detected outside of the filter rectangle, an
* outside rectangle event is generated and the rectangle is disabled.
* Filter rectangles are always treated as "one-shot" events. Any
* parameters that are omitted default to the current locator position.
* If all parameters are omitted, any locator motion will be reported.
* DECELR always cancels any prevous rectangle definition.
*
* The locator is usually associated with the mouse-cursor, but based
* on cells instead of pixels. See DECELR how to initialize and enable
* it. DECELR can also enable pixel-mode instead of cell-mode.
*
* TODO: implement
*/
return 0;
}
static int screen_DECELF(term_screen *screen, const term_seq *seq) {
/*
* DECELF - enable-local-functions
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECELR(term_screen *screen, const term_seq *seq) {
/*
* DECELR - enable-locator-reporting
* This changes the locator-reporting mode. @args[0] specifies the mode
* to set, 0 disables locator-reporting, 1 enables it continously, 2
* enables it for a single report. @args[1] specifies the
* precision-mode. 0 and 2 set the reporting to cell-precision, 1 sets
* pixel-precision.
*
* Defaults:
* args[0]: 0
* args[1]: 0
*
* TODO: implement
*/
return 0;
}
static int screen_DECERA(term_screen *screen, const term_seq *seq) {
/*
* DECERA - erase-rectangular-area
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECFI(term_screen *screen, const term_seq *seq) {
/*
* DECFI - forward-index
* This control function moves the cursor forward one column. If the
* cursor is at the right margin, then all screen data within the
* margins moves one column to the left. The column shifted past the
* left margin is lost.
* DECFI adds a new column at the right margin, with no visual
* attributes. DECFI does not affect margins. If the cursor is beyond
* the right margin at the border of the page when the terminal
* receives DECFI, then the terminal ignores DECFI.
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECFRA(term_screen *screen, const term_seq *seq) {
/*
* DECFRA - fill-rectangular-area
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECIC(term_screen *screen, const term_seq *seq) {
/*
* DECIC - insert-column
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECID(term_screen *screen, const term_seq *seq) {
/*
* DECID - return-terminal-id
* This is an obsolete form of TERM_CMD_DA1.
*/
return screen_DA1(screen, seq);
}
static int screen_DECINVM(term_screen *screen, const term_seq *seq) {
/*
* DECINVM - invoke-macro
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECKBD(term_screen *screen, const term_seq *seq) {
/*
* DECKBD - keyboard-language-selection
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECKPAM(term_screen *screen, const term_seq *seq) {
/*
* DECKPAM - keypad-application-mode
* Enables the keypad-application mode. If enabled, the keypad sends
* special characters instead of the printed characters. This way,
* applications can detect whether a numeric key was pressed on the
* top-row or on the keypad.
* Default is keypad-numeric-mode.
*/
screen->flags |= TERM_FLAG_KEYPAD_MODE;
return 0;
}
static int screen_DECKPNM(term_screen *screen, const term_seq *seq) {
/*
* DECKPNM - keypad-numeric-mode
* This disables the keypad-application-mode (DECKPAM) and returns to
* the keypad-numeric-mode. Keypresses on the keypad generate the same
* sequences as corresponding keypresses on the main keyboard.
* Default is keypad-numeric-mode.
*/
screen->flags &= ~TERM_FLAG_KEYPAD_MODE;
return 0;
}
static int screen_DECLFKC(term_screen *screen, const term_seq *seq) {
/*
* DECLFKC - local-function-key-control
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECLL(term_screen *screen, const term_seq *seq) {
/*
* DECLL - load-leds
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECLTOD(term_screen *screen, const term_seq *seq) {
/*
* DECLTOD - load-time-of-day
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECPCTERM(term_screen *screen, const term_seq *seq) {
/*
* DECPCTERM - pcterm-mode
* This enters/exits the PCTerm mode. Default mode is VT-mode. It can
* also select parameters for scancode/keycode mappings in SCO mode.
*
* Definitely not worth implementing. Lets kill PCTerm/SCO modes!
*/
return 0;
}
static int screen_DECPKA(term_screen *screen, const term_seq *seq) {
/*
* DECPKA - program-key-action
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECPKFMR(term_screen *screen, const term_seq *seq) {
/*
* DECPKFMR - program-key-free-memory-report
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECRARA(term_screen *screen, const term_seq *seq) {
/*
* DECRARA - reverse-attributes-in-rectangular-area
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECRC(term_screen *screen, const term_seq *seq) {
/*
* DECRC - restore-cursor
* Restores the terminal to the state saved by the save cursor (DECSC)
* function. This includes more than just the cursor-position.
*
* If nothing was saved by DECSC, then DECRC performs the following
* actions:
* * Moves the cursor to the home position (upper left of screen).
* * Resets origin mode (DECOM).
* * Turns all character attributes off (normal setting).
* * Maps the ASCII character set into GL, and the DEC Supplemental
* Graphic set into GR.
*
* The terminal maintains a separate DECSC buffer for the main display
* and the status line. This feature lets you save a separate operating
* state for the main display and the status line.
*/
screen->attr = screen->saved.attr;
screen->gl = screen->saved.gl;
screen->gr = screen->saved.gr;
screen->glt = screen->saved.glt;
screen->grt = screen->saved.grt;
set_reset(screen, TERM_FLAG_AUTO_WRAP, screen->flags & TERM_FLAG_AUTO_WRAP);
set_reset(screen, TERM_FLAG_ORIGIN_MODE, screen->flags & TERM_FLAG_ORIGIN_MODE);
screen_cursor_set(screen, screen->saved.cursor_x, screen->saved.cursor_y);
return 0;
}
static int screen_DECREQTPARM(term_screen *screen, const term_seq *seq) {
/*
* DECREQTPARM - request-terminal-parameters
* The sequence DECREPTPARM is sent by the terminal controller to notify
* the host of the status of selected terminal parameters. The status
* sequence may be sent when requested by the host or at the terminal's
* discretion. DECREPTPARM is sent upon receipt of a DECREQTPARM.
*
* If @args[0] is 0, this marks a request and the terminal is allowed
* to send DECREPTPARM messages without request. If it is 1, the same
* applies but the terminal should no longer send DECREPTPARM
* unrequested.
* 2 and 3 mark a report, but 3 is only used if the terminal answers as
* an explicit request with @args[0] == 1.
*
* The other arguments are ignored in requests, but have the following
* meaning in responses:
* args[1]: 1=no-parity-set 4=parity-set-and-odd 5=parity-set-and-even
* args[2]: 1=8bits-per-char 2=7bits-per-char
* args[3]: transmission-speed
* args[4]: receive-speed
* args[5]: 1=bit-rate-multiplier-is-16
* args[6]: This value communicates the four switch values in block 5
* of SETUP B, which are only visible to the user when an STP
* option is installed. These bits may be assigned for an STP
* device. The four bits are a decimal-encoded binary number.
* Value between 0-15.
*
* The transmission/receive speeds have mappings for number => bits/s
* which are quite weird. Examples are: 96->3600, 112->9600, 120->19200
*
* Defaults:
* args[0]: 0
*/
if (seq->n_args < 1 || seq->args[0] == 0) {
screen->flags &= ~TERM_FLAG_INHIBIT_TPARM;
return SEQ_WRITE(screen, C0_CSI, C1_CSI, "2;1;1;120;120;1;0x");
} else if (seq->args[0] == 1) {
screen->flags |= TERM_FLAG_INHIBIT_TPARM;
return SEQ_WRITE(screen, C0_CSI, C1_CSI, "3;1;1;120;120;1;0x");
} else {
return 0;
}
}
static int screen_DECRPKT(term_screen *screen, const term_seq *seq) {
/*
* DECRPKT - report-key-type
* Response to DECRQKT, we can safely ignore it as we're the one sending
* it to the host.
*/
return 0;
}
static int screen_DECRQCRA(term_screen *screen, const term_seq *seq) {
/*
* DECRQCRA - request-checksum-of-rectangular-area
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECRQDE(term_screen *screen, const term_seq *seq) {
/*
* DECRQDE - request-display-extent
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECRQKT(term_screen *screen, const term_seq *seq) {
/*
* DECRQKT - request-key-type
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECRQLP(term_screen *screen, const term_seq *seq) {
/*
* DECRQLP - request-locator-position
* See DECELR for locator-information.
*
* TODO: document and implement
*/
return 0;
}
static int screen_DECRQM_ANSI(term_screen *screen, const term_seq *seq) {
/*
* DECRQM_ANSI - request-mode-ansi
* The host sends this control function to find out if a particular mode
* is set or reset. The terminal responds with a report mode function.
* @args[0] contains the mode to query.
*
* Response is DECRPM with the first argument set to the mode that was
* queried, second argument is 0 if mode is invalid, 1 if mode is set,
* 2 if mode is not set (reset), 3 if mode is permanently set and 4 if
* mode is permanently not set (reset):
* ANSI: ^[ MODE ; VALUE $ y
* DEC: ^[ ? MODE ; VALUE $ y
*
* TODO: implement
*/
return 0;
}
static int screen_DECRQM_DEC(term_screen *screen, const term_seq *seq) {
/*
* DECRQM_DEC - request-mode-dec
* Same as DECRQM_ANSI but for DEC modes.
*
* TODO: implement
*/
return 0;
}
static int screen_DECRQPKFM(term_screen *screen, const term_seq *seq) {
/*
* DECRQPKFM - request-program-key-free-memory
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECRQPSR(term_screen *screen, const term_seq *seq) {
/*
* DECRQPSR - request-presentation-state-report
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECRQTSR(term_screen *screen, const term_seq *seq) {
/*
* DECRQTSR - request-terminal-state-report
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECRQUPSS(term_screen *screen, const term_seq *seq) {
/*
* DECRQUPSS - request-user-preferred-supplemental-set
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECSACE(term_screen *screen, const term_seq *seq) {
/*
* DECSACE - select-attribute-change-extent
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECSASD(term_screen *screen, const term_seq *seq) {
/*
* DECSASD - select-active-status-display
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECSC(term_screen *screen, const term_seq *seq) {
/*
* DECSC - save-cursor
* Save cursor and terminal state so it can be restored later on.
* Saves the following items in the terminal's memory:
* * Cursor position
* * Character attributes set by the SGR command
* * Character sets (G0, G1, G2, or G3) currently in GL and GR
* * Wrap flag (autowrap or no autowrap)
* * State of origin mode (DECOM)
* * Selective erase attribute
* * Any single shift 2 (SS2) or single shift 3 (SS3) functions sent
*/
screen->saved.cursor_x = screen->cursor_x;
screen->saved.cursor_y = screen->cursor_y;
screen->saved.attr = screen->attr;
screen->saved.gl = screen->gl;
screen->saved.gr = screen->gr;
screen->saved.glt = screen->glt;
screen->saved.grt = screen->grt;
screen->saved.flags = screen->flags & (TERM_FLAG_AUTO_WRAP
| TERM_FLAG_ORIGIN_MODE);
return 0;
}
static int screen_DECSCA(term_screen *screen, const term_seq *seq) {
/*
* DECSCA - select-character-protection-attribute
* Defines the characters that come after it as erasable or not erasable
* from the screen. The selective erase control functions (DECSED and
* DECSEL) can only erase characters defined as erasable.
*
* @args[0] specifies the new mode. 0 and 2 mark any following character
* as erasable, 1 marks it as not erasable.
*
* Defaults:
* args[0]: 0
*/
unsigned int mode = 0;
if (seq->args[0] > 0)
mode = seq->args[0];
switch (mode) {
case 0:
case 2:
screen->attr.protect = 0;
break;
case 1:
screen->attr.protect = 1;
break;
}
return 0;
}
static int screen_DECSCL(term_screen *screen, const term_seq *seq) {
/*
* DECSCL - select-conformance-level
* Select the terminal's operating level. The factory default is
* level 4 (VT Level 4 mode, 7-bit controls).
* When you change the conformance level, the terminal performs a hard
* reset (RIS).
*
* @args[0] defines the conformance-level, valid values are:
* 61: Level 1 (VT100)
* 62: Level 2 (VT200)
* 63: Level 3 (VT300)
* 64: Level 4 (VT400)
* @args[1] defines the 8bit-mode, valid values are:
* 0: 8-bit controls
* 1: 7-bit controls
* 2: 8-bit controls (same as 0)
*
* If @args[0] is 61, then @args[1] is ignored and 7bit controls are
* enforced.
*
* Defaults:
* args[0]: 64
* args[1]: 0
*/
unsigned int level = 64, bit = 0;
if (seq->n_args > 0) {
level = seq->args[0];
if (seq->n_args > 1)
bit = seq->args[1];
}
term_screen_hard_reset(screen);
switch (level) {
case 61:
screen->conformance_level = TERM_CONFORMANCE_LEVEL_VT100;
screen->flags |= TERM_FLAG_7BIT_MODE;
break;
case 62 ... 69:
screen->conformance_level = TERM_CONFORMANCE_LEVEL_VT400;
if (bit == 1)
screen->flags |= TERM_FLAG_7BIT_MODE;
else
screen->flags &= ~TERM_FLAG_7BIT_MODE;
break;
}
return 0;
}
static int screen_DECSCP(term_screen *screen, const term_seq *seq) {
/*
* DECSCP - select-communication-port
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECSCPP(term_screen *screen, const term_seq *seq) {
/*
* DECSCPP - select-columns-per-page
* Select columns per page. The number of rows is unaffected by this.
* @args[0] selectes the number of columns (width), DEC only defines 80
* and 132, but we allow any integer here. 0 is equivalent to 80.
* Page content is *not* cleared and the cursor is left untouched.
* However, if the page is reduced in width and the cursor would be
* outside the visible region, it's set to the right border. Newly added
* cells are cleared. No data is retained outside the visible region.
*
* Defaults:
* args[0]: 0
*
* TODO: implement
*/
return 0;
}
static int screen_DECSCS(term_screen *screen, const term_seq *seq) {
/*
* DECSCS - select-communication-speed
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECSCUSR(term_screen *screen, const term_seq *seq) {
/*
* DECSCUSR - set-cursor-style
* This changes the style of the cursor. @args[0] can be one of:
* 0, 1: blinking block
* 2: steady block
* 3: blinking underline
* 4: steady underline
* Changing this setting does _not_ affect the cursor visibility itself.
* Use DECTCEM for that.
*
* Defaults:
* args[0]: 0
*
* TODO: implement
*/
return 0;
}
static int screen_DECSDDT(term_screen *screen, const term_seq *seq) {
/*
* DECSDDT - select-disconnect-delay-time
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECSDPT(term_screen *screen, const term_seq *seq) {
/*
* DECSDPT - select-digital-printed-data-type
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECSED(term_screen *screen, const term_seq *seq) {
/*
* DECSED - selective-erase-in-display
* This control function erases some or all of the erasable characters
* in the display. DECSED can only erase characters defined as erasable
* by the DECSCA control function. DECSED works inside or outside the
* scrolling margins.
*
* @args[0] defines which regions are erased. If it is 0, all cells from
* the cursor (inclusive) till the end of the display are erase. If it
* is 1, all cells from the start of the display till the cursor
* (inclusive) are erased. If it is 2, all cells are erased.
*
* Defaults:
* args[0]: 0
*/
unsigned int mode = 0;
if (seq->args[0] > 0)
mode = seq->args[0];
switch (mode) {
case 0:
term_page_erase(screen->page,
screen->cursor_x, screen->cursor_y,
screen->page->width, screen->page->height,
&screen->attr, screen->age, true);
break;
case 1:
term_page_erase(screen->page,
0, 0,
screen->cursor_x, screen->cursor_y,
&screen->attr, screen->age, true);
break;
case 2:
term_page_erase(screen->page,
0, 0,
screen->page->width, screen->page->height,
&screen->attr, screen->age, true);
break;
}
return 0;
}
static int screen_DECSEL(term_screen *screen, const term_seq *seq) {
/*
* DECSEL - selective-erase-in-line
* This control function erases some or all of the erasable characters
* in a single line of text. DECSEL erases only those characters defined
* as erasable by the DECSCA control function. DECSEL works inside or
* outside the scrolling margins.
*
* @args[0] defines the region to be erased. If it is 0, all cells from
* the cursor (inclusive) till the end of the line are erase. If it is
* 1, all cells from the start of the line till the cursor (inclusive)
* are erased. If it is 2, the whole line of the cursor is erased.
*
* Defaults:
* args[0]: 0
*/
unsigned int mode = 0;
if (seq->args[0] > 0)
mode = seq->args[0];
switch (mode) {
case 0:
term_page_erase(screen->page,
screen->cursor_x, screen->cursor_y,
screen->page->width, screen->cursor_y,
&screen->attr, screen->age, true);
break;
case 1:
term_page_erase(screen->page,
0, screen->cursor_y,
screen->cursor_x, screen->cursor_y,
&screen->attr, screen->age, true);
break;
case 2:
term_page_erase(screen->page,
0, screen->cursor_y,
screen->page->width, screen->cursor_y,
&screen->attr, screen->age, true);
break;
}
return 0;
}
static int screen_DECSERA(term_screen *screen, const term_seq *seq) {
/*
* DECSERA - selective-erase-rectangular-area
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECSFC(term_screen *screen, const term_seq *seq) {
/*
* DECSFC - select-flow-control
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECSKCV(term_screen *screen, const term_seq *seq) {
/*
* DECSKCV - set-key-click-volume
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECSLCK(term_screen *screen, const term_seq *seq) {
/*
* DECSLCK - set-lock-key-style
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECSLE(term_screen *screen, const term_seq *seq) {
/*
* DECSLE - select-locator-events
*
* TODO: implement
*/
return 0;
}
static int screen_DECSLPP(term_screen *screen, const term_seq *seq) {
/*
* DECSLPP - set-lines-per-page
* Set the number of lines used for the page. @args[0] specifies the
* number of lines to be used. DEC only allows a limited number of
* choices, however, we allow all integers. 0 is equivalent to 24.
*
* Defaults:
* args[0]: 0
*
* TODO: implement
*/
return 0;
}
static int screen_DECSLRM_OR_SC(term_screen *screen, const term_seq *seq) {
/*
* DECSLRM_OR_SC - set-left-and-right-margins or save-cursor
*
* TODO: Detect save-cursor and run it. DECSLRM is not worth
* implementing.
*/
return 0;
}
static int screen_DECSMBV(term_screen *screen, const term_seq *seq) {
/*
* DECSMBV - set-margin-bell-volume
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECSMKR(term_screen *screen, const term_seq *seq) {
/*
* DECSMKR - select-modifier-key-reporting
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECSNLS(term_screen *screen, const term_seq *seq) {
/*
* DECSNLS - set-lines-per-screen
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECSPP(term_screen *screen, const term_seq *seq) {
/*
* DECSPP - set-port-parameter
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECSPPCS(term_screen *screen, const term_seq *seq) {
/*
* DECSPPCS - select-pro-printer-character-set
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECSPRTT(term_screen *screen, const term_seq *seq) {
/*
* DECSPRTT - select-printer-type
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECSR(term_screen *screen, const term_seq *seq) {
/*
* DECSR - secure-reset
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECSRFR(term_screen *screen, const term_seq *seq) {
/*
* DECSRFR - select-refresh-rate
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECSSCLS(term_screen *screen, const term_seq *seq) {
/*
* DECSSCLS - set-scroll-speed
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECSSDT(term_screen *screen, const term_seq *seq) {
/*
* DECSSDT - select-status-display-line-type
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECSSL(term_screen *screen, const term_seq *seq) {
/*
* DECSSL - select-setup-language
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECST8C(term_screen *screen, const term_seq *seq) {
/*
* DECST8C - set-tab-at-every-8-columns
* Clear the tab-ruler and reset it to a tab at every 8th column,
* starting at 9 (though, setting a tab at 1 is fine as it has no
* effect).
*/
unsigned int i;
for (i = 0; i < screen->page->width; i += 8)
screen->tabs[i / 8] = 0x1;
return 0;
}
static int screen_DECSTBM(term_screen *screen, const term_seq *seq) {
/*
* DECSTBM - set-top-and-bottom-margins
* This control function sets the top and bottom margins for the current
* page. You cannot perform scrolling outside the margins.
*
* @args[0] defines the top margin, @args[1] defines the bottom margin.
* The bottom margin must be lower than the top-margin.
*
* This call resets the cursor position to 0/0 of the page.
*
* Defaults:
* args[0]: 1
* args[1]: last page-line
*/
unsigned int top, bottom;
top = 1;
bottom = screen->page->height;
if (seq->args[0] > 0)
top = seq->args[0];
if (seq->args[1] > 0)
bottom = seq->args[1];
if (top > screen->page->height)
top = screen->page->height;
if (bottom > screen->page->height)
bottom = screen->page->height;
if (top >= bottom || top > screen->page->height || bottom > screen->page->height) {
top = 1;
bottom = screen->page->height;
}
term_page_set_scroll_region(screen->page_main, top - 1, bottom - top + 1);
term_page_set_scroll_region(screen->page_alt, top - 1, bottom - top + 1);
screen_cursor_clear_wrap(screen);
screen_cursor_set(screen, 0, 0);
return 0;
}
static int screen_DECSTR(term_screen *screen, const term_seq *seq) {
/*
* DECSTR - soft-terminal-reset
* Perform a soft reset to the default values.
*/
term_screen_soft_reset(screen);
return 0;
}
static int screen_DECSTRL(term_screen *screen, const term_seq *seq) {
/*
* DECSTRL - set-transmit-rate-limit
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECSWBV(term_screen *screen, const term_seq *seq) {
/*
* DECSWBV - set-warning-bell-volume
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECSWL(term_screen *screen, const term_seq *seq) {
/*
* DECSWL - single-width-single-height-line
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECTID(term_screen *screen, const term_seq *seq) {
/*
* DECTID - select-terminal-id
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECTME(term_screen *screen, const term_seq *seq) {
/*
* DECTME - terminal-mode-emulation
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DECTST(term_screen *screen, const term_seq *seq) {
/*
* DECTST - invoke-confidence-test
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_DL(term_screen *screen, const term_seq *seq) {
/*
* DL - delete-line
* This control function deletes one or more lines in the scrolling
* region, starting with the line that has the cursor. @args[0] defines
* the number of lines to delete. 0 is treated the same as 1.
* As lines are deleted, lines below the cursor and in the scrolling
* region move up. The terminal adds blank lines with no visual
* character attributes at the bottom of the scrolling region. If it is
* greater than the number of lines remaining on the page, DL deletes
* only the remaining lines. DL has no effect outside the scrolling
* margins.
*
* Defaults:
* args[0]: 1
*/
unsigned int num = 1;
if (seq->args[0] > 0)
num = seq->args[0];
term_page_delete_lines(screen->page, screen->cursor_y, num, &screen->attr, screen->age);
return 0;
}
static int screen_DSR_ANSI(term_screen *screen, const term_seq *seq) {
/*
* DSR_ANSI - device-status-report-ansi
*
* TODO: implement
*/
return 0;
}
static int screen_DSR_DEC(term_screen *screen, const term_seq *seq) {
/*
* DSR_DEC - device-status-report-dec
*
* TODO: implement
*/
return 0;
}
static int screen_ECH(term_screen *screen, const term_seq *seq) {
/*
* ECH - erase-character
* This control function erases one or more characters, from the cursor
* position to the right. ECH clears character attributes from erased
* character positions. ECH works inside or outside the scrolling
* margins.
* @args[0] defines the number of characters to erase. 0 is treated the
* same as 1.
*
* Defaults:
* args[0]: 1
*/
unsigned int num = 1;
if (seq->args[0] > 0)
num = seq->args[0];
term_page_erase(screen->page,
screen->cursor_x, screen->cursor_y,
screen->cursor_x + num, screen->cursor_y,
&screen->attr, screen->age, false);
return 0;
}
static int screen_ED(term_screen *screen, const term_seq *seq) {
/*
* ED - erase-in-display
* This control function erases characters from part or all of the
* display. When you erase complete lines, they become single-height,
* single-width lines, with all visual character attributes cleared. ED
* works inside or outside the scrolling margins.
*
* @args[0] defines the region to erase. 0 means from cursor (inclusive)
* till the end of the screen. 1 means from the start of the screen till
* the cursor (inclusive) and 2 means the whole screen.
*
* Defaults:
* args[0]: 0
*/
unsigned int mode = 0;
if (seq->args[0] > 0)
mode = seq->args[0];
switch (mode) {
case 0:
term_page_erase(screen->page,
screen->cursor_x, screen->cursor_y,
screen->page->width, screen->page->height,
&screen->attr, screen->age, false);
break;
case 1:
term_page_erase(screen->page,
0, 0,
screen->cursor_x, screen->cursor_y,
&screen->attr, screen->age, false);
break;
case 2:
term_page_erase(screen->page,
0, 0,
screen->page->width, screen->page->height,
&screen->attr, screen->age, false);
break;
}
return 0;
}
static int screen_EL(term_screen *screen, const term_seq *seq) {
/*
* EL - erase-in-line
* This control function erases characters on the line that has the
* cursor. EL clears all character attributes from erased character
* positions. EL works inside or outside the scrolling margins.
*
* @args[0] defines the region to erase. 0 means from cursor (inclusive)
* till the end of the line. 1 means from the start of the line till the
* cursor (inclusive) and 2 means the whole line.
*
* Defaults:
* args[0]: 0
*/
unsigned int mode = 0;
if (seq->args[0] > 0)
mode = seq->args[0];
switch (mode) {
case 0:
term_page_erase(screen->page,
screen->cursor_x, screen->cursor_y,
screen->page->width, screen->cursor_y,
&screen->attr, screen->age, false);
break;
case 1:
term_page_erase(screen->page,
0, screen->cursor_y,
screen->cursor_x, screen->cursor_y,
&screen->attr, screen->age, false);
break;
case 2:
term_page_erase(screen->page,
0, screen->cursor_y,
screen->page->width, screen->cursor_y,
&screen->attr, screen->age, false);
break;
}
return 0;
}
static int screen_ENQ(term_screen *screen, const term_seq *seq) {
/*
* ENQ - enquiry
* Transmit the answerback-string. If none is set, do nothing.
*/
if (screen->answerback)
return screen_write(screen, screen->answerback, strlen(screen->answerback));
return 0;
}
static int screen_EPA(term_screen *screen, const term_seq *seq) {
/*
* EPA - end-of-guarded-area
*
* TODO: What is this?
*/
return 0;
}
static int screen_FF(term_screen *screen, const term_seq *seq) {
/*
* FF - form-feed
* This causes the cursor to jump to the next line. It is treated the
* same as LF.
*/
return screen_LF(screen, seq);
}
static int screen_HPA(term_screen *screen, const term_seq *seq) {
/*
* HPA - horizontal-position-absolute
* HPA causes the active position to be moved to the n-th horizontal
* position of the active line. If an attempt is made to move the active
* position past the last position on the line, then the active position
* stops at the last position on the line.
*
* @args[0] defines the horizontal position. 0 is treated as 1.
*
* Defaults:
* args[0]: 1
*/
unsigned int num = 1;
if (seq->args[0] > 0)
num = seq->args[0];
screen_cursor_clear_wrap(screen);
screen_cursor_set(screen, num - 1, screen->cursor_y);
return 0;
}
static int screen_HPR(term_screen *screen, const term_seq *seq) {
/*
* HPR - horizontal-position-relative
* HPR causes the active position to be moved to the n-th following
* horizontal position of the active line. If an attempt is made to move
* the active position past the last position on the line, then the
* active position stops at the last position on the line.
*
* @args[0] defines the horizontal position. 0 is treated as 1.
*
* Defaults:
* args[0]: 1
*/
unsigned int num = 1;
if (seq->args[0] > 0)
num = seq->args[0];
screen_cursor_clear_wrap(screen);
screen_cursor_right(screen, num);
return 0;
}
static int screen_HT(term_screen *screen, const term_seq *seq) {
/*
* HT - horizontal-tab
* Moves the cursor to the next tab stop. If there are no more tab
* stops, the cursor moves to the right margin. HT does not cause text
* to auto wrap.
*/
screen_cursor_clear_wrap(screen);
screen_cursor_right_tab(screen, 1);
return 0;
}
static int screen_HTS(term_screen *screen, const term_seq *seq) {
/*
* HTS - horizontal-tab-set
* HTS sets a horizontal tab stop at the column position indicated by
* the value of the active column when the terminal receives an HTS.
*
* Executing an HTS does not effect the other horizontal tab stop
* settings.
*/
unsigned int pos;
pos = screen->cursor_x;
if (screen->page->width > 0)
screen->tabs[pos / 8] |= 1U << (pos % 8);
return 0;
}
static int screen_HVP(term_screen *screen, const term_seq *seq) {
/*
* HVP - horizontal-and-vertical-position
* This control function works the same as the cursor position (CUP)
* function. Origin mode (DECOM) selects line numbering and the ability
* to move the cursor into margins.
*
* Defaults:
* args[0]: 1
* args[1]: 1
*/
return screen_CUP(screen, seq);
}
static int screen_ICH(term_screen *screen, const term_seq *seq) {
/*
* ICH - insert-character
* This control function inserts one or more space (SP) characters
* starting at the cursor position. @args[0] is the number of characters
* to insert. 0 is treated as 1.
*
* The ICH sequence inserts blank characters with the normal
* character attribute. The cursor remains at the beginning of the blank
* characters. Text between the cursor and right margin moves to the
* right. Characters scrolled past the right margin are lost. ICH has no
* effect outside the scrolling margins.
*
* Defaults:
* args[0]: 1
*/
unsigned int num = 1;
if (seq->args[0] > 0)
num = seq->args[0];
screen_cursor_clear_wrap(screen);
term_page_insert_cells(screen->page, screen->cursor_x, screen->cursor_y, num, &screen->attr, screen->age);
return 0;
}
static int screen_IL(term_screen *screen, const term_seq *seq) {
/*
* IL - insert-line
* This control function inserts one or more blank lines, starting at
* the cursor. @args[0] is the number of lines to insert. 0 is treated
* as 1.
*
* As lines are inserted, lines below the cursor and in the scrolling
* region move down. Lines scrolled off the page are lost. IL has no
* effect outside the page margins.
*
* Defaults:
* args[0]: 1
*/
unsigned int num = 1;
if (seq->args[0] > 0)
num = seq->args[0];
screen_cursor_clear_wrap(screen);
term_page_insert_lines(screen->page, screen->cursor_y, num, &screen->attr, screen->age);
return 0;
}
static int screen_IND(term_screen *screen, const term_seq *seq) {
/*
* IND - index
* IND moves the cursor down one line in the same column. If the cursor
* is at the bottom margin, then the screen performs a scroll-up.
*/
screen_cursor_down(screen, 1, true);
return 0;
}
static int screen_LF(term_screen *screen, const term_seq *seq) {
/*
* LF - line-feed
* Causes a line feed or a new line operation, depending on the setting
* of line feed/new line mode.
*/
screen_cursor_down(screen, 1, true);
if (screen->flags & TERM_FLAG_NEWLINE_MODE)
screen_cursor_left(screen, screen->cursor_x);
return 0;
}
static int screen_LS1R(term_screen *screen, const term_seq *seq) {
/*
* LS1R - locking-shift-1-right
* Map G1 into GR.
*/
screen->gr = &screen->g1;
return 0;
}
static int screen_LS2(term_screen *screen, const term_seq *seq) {
/*
* LS2 - locking-shift-2
* Map G2 into GL.
*/
screen->gl = &screen->g2;
return 0;
}
static int screen_LS2R(term_screen *screen, const term_seq *seq) {
/*
* LS2R - locking-shift-2-right
* Map G2 into GR.
*/
screen->gr = &screen->g2;
return 0;
}
static int screen_LS3(term_screen *screen, const term_seq *seq) {
/*
* LS3 - locking-shift-3
* Map G3 into GL.
*/
screen->gl = &screen->g3;
return 0;
}
static int screen_LS3R(term_screen *screen, const term_seq *seq) {
/*
* LS3R - locking-shift-3-right
* Map G3 into GR.
*/
screen->gr = &screen->g3;
return 0;
}
static int screen_MC_ANSI(term_screen *screen, const term_seq *seq) {
/*
* MC_ANSI - media-copy-ansi
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_MC_DEC(term_screen *screen, const term_seq *seq) {
/*
* MC_DEC - media-copy-dec
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_NEL(term_screen *screen, const term_seq *seq) {
/*
* NEL - next-line
* Moves cursor to first position on next line. If cursor is at bottom
* margin, then screen performs a scroll-up.
*/
screen_cursor_clear_wrap(screen);
screen_cursor_down(screen, 1, true);
screen_cursor_set(screen, 0, screen->cursor_y);
return 0;
}
static int screen_NP(term_screen *screen, const term_seq *seq) {
/*
* NP - next-page
* This control function moves the cursor forward to the home position
* on one of the following pages in page memory. If there is only one
* page, then the terminal ignores NP.
* If NP tries to move the cursor past the last page in memory, then the
* cursor stops at the last page.
*
* @args[0] defines the number of pages to forward. 0 is treated as 1.
*
* Defaults:
* args[0]: 1
*
* Probably not worth implementing. We only support a single page.
*/
return 0;
}
static int screen_NULL(term_screen *screen, const term_seq *seq) {
/*
* NULL - null
* The NULL operation does nothing. ASCII NULL is always ignored.
*/
return 0;
}
static int screen_PP(term_screen *screen, const term_seq *seq) {
/*
* PP - preceding-page
* This control function moves the cursor backward to the home position
* on one of the preceding pages in page memory. If there is only one
* page, then the terminal ignores PP.
* If PP tries to move the cursor back farther than the first page in
* memory, then the cursor stops at the first page.
*
* @args[0] defines the number of pages to go backwards. 0 is treated
* as 1.
*
* Defaults:
* args[0]: 1
*
* Probably not worth implementing. We only support a single page.
*/
return 0;
}
static int screen_PPA(term_screen *screen, const term_seq *seq) {
/*
* PPA - page-position-absolute
* This control function can move the cursor to the corresponding row
* and column on any page in page memory. You select the page by its
* number. If there is only one page, then the terminal ignores PPA.
*
* @args[0] is the number of the page to move the cursor to. If it is
* greater than the number of the last page in memory, then the cursor
* stops at the last page. If it is less than the number of the first
* page, then the cursor stops at the first page.
*
* Defaults:
* args[0]: 1
*
* Probably not worth implementing. We only support a single page.
*/
return 0;
}
static int screen_PPB(term_screen *screen, const term_seq *seq) {
/*
* PPB - page-position-backward
* This control function moves the cursor backward to the corresponding
* row and column on one of the preceding pages in page memory. If there
* is only one page, then the terminal ignores PPB.
*
* @args[0] indicates the number of pages to move the cursor backward.
* If it tries to move the cursor back farther than the first page in
* memory, then the cursor stops at the first page. 0 is treated as 1.
*
* Defaults:
* args[0]: 1
*
* Probably not worth implementing. We only support a single page.
*/
return 0;
}
static int screen_PPR(term_screen *screen, const term_seq *seq) {
/*
* PPR - page-position-relative
* This control function moves the cursor forward to the corresponding
* row and column on one of the following pages in page memory. If there
* is only one page, then the terminal ignores PPR.
*
* @args[0] indicates how many pages to move the cursor forward. If it
* tries to move the cursor beyond the last page in memory, then the
* cursor stops at the last page. 0 is treated as 1.
*
* Defaults:
* args[0]: 1
*
* Probably not worth implementing. We only support a single page.
*/
return 0;
}
static int screen_RC(term_screen *screen, const term_seq *seq) {
/*
* RC - restore-cursor
*/
return screen_DECRC(screen, seq);
}
static int screen_REP(term_screen *screen, const term_seq *seq) {
/*
* REP - repeat
* Repeat the preceding graphics-character the given number of times.
* @args[0] specifies how often it shall be repeated. 0 is treated as 1.
*
* Defaults:
* args[0]: 1
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_RI(term_screen *screen, const term_seq *seq) {
/*
* RI - reverse-index
* Moves the cursor up one line in the same column. If the cursor is at
* the top margin, the page scrolls down.
*/
screen_cursor_up(screen, 1, true);
return 0;
}
static int screen_RIS(term_screen *screen, const term_seq *seq) {
/*
* RIS - reset-to-initial-state
* This control function causes a nonvolatile memory (NVR) recall to
* occur. RIS replaces all set-up features with their saved settings.
*
* The terminal stores these saved settings in NVR memory. The saved
* setting for a feature is the same as the factory-default setting,
* unless you saved a new setting.
*/
term_screen_hard_reset(screen);
return 0;
}
static int screen_RM_ANSI(term_screen *screen, const term_seq *seq) {
/*
* RM_ANSI - reset-mode-ansi
*
* TODO: implement (see VT510rm manual)
*/
unsigned int i;
for (i = 0; i < seq->n_args; ++i)
screen_mode_change(screen, seq->args[i], false, false);
return 0;
}
static int screen_RM_DEC(term_screen *screen, const term_seq *seq) {
/*
* RM_DEC - reset-mode-dec
* This is the same as RM_ANSI but for DEC modes.
*/
unsigned int i;
for (i = 0; i < seq->n_args; ++i)
screen_mode_change(screen, seq->args[i], true, false);
return 0;
}
static int screen_S7C1T(term_screen *screen, const term_seq *seq) {
/*
* S7C1T - set-7bit-c1-terminal
* This causes the terminal to start sending C1 controls as 7bit
* sequences instead of 8bit C1 controls.
* This is ignored if the terminal is below level-2 emulation mode
* (VT100 and below), the terminal already sends 7bit controls then.
*/
if (screen->conformance_level > TERM_CONFORMANCE_LEVEL_VT100)
screen->flags |= TERM_FLAG_7BIT_MODE;
return 0;
}
static int screen_S8C1T(term_screen *screen, const term_seq *seq) {
/*
* S8C1T - set-8bit-c1-terminal
* This causes the terminal to start sending C1 controls as 8bit C1
* control instead of 7bit sequences.
* This is ignored if the terminal is below level-2 emulation mode
* (VT100 and below). The terminal always sends 7bit controls in those
* modes.
*/
if (screen->conformance_level > TERM_CONFORMANCE_LEVEL_VT100)
screen->flags &= ~TERM_FLAG_7BIT_MODE;
return 0;
}
static int screen_SCS(term_screen *screen, const term_seq *seq) {
/*
* SCS - select-character-set
* Designate character sets to G-sets. The mapping from intermediates
* and terminal characters in the escape sequence to G-sets and
* character-sets is non-trivial and implemented separately. See there
* for more information.
* This call simply sets the selected G-set to the desired
* character-set.
*/
term_charset *cs = NULL;
/* TODO: support more of them? */
switch (seq->charset) {
case TERM_CHARSET_ISO_LATIN1_SUPPLEMENTAL:
case TERM_CHARSET_ISO_LATIN2_SUPPLEMENTAL:
case TERM_CHARSET_ISO_LATIN5_SUPPLEMENTAL:
case TERM_CHARSET_ISO_GREEK_SUPPLEMENTAL:
case TERM_CHARSET_ISO_HEBREW_SUPPLEMENTAL:
case TERM_CHARSET_ISO_LATIN_CYRILLIC:
break;
case TERM_CHARSET_DEC_SPECIAL_GRAPHIC:
cs = &term_dec_special_graphics;
break;
case TERM_CHARSET_DEC_SUPPLEMENTAL:
cs = &term_dec_supplemental_graphics;
break;
case TERM_CHARSET_DEC_TECHNICAL:
case TERM_CHARSET_CYRILLIC_DEC:
case TERM_CHARSET_DUTCH_NRCS:
case TERM_CHARSET_FINNISH_NRCS:
case TERM_CHARSET_FRENCH_NRCS:
case TERM_CHARSET_FRENCH_CANADIAN_NRCS:
case TERM_CHARSET_GERMAN_NRCS:
case TERM_CHARSET_GREEK_DEC:
case TERM_CHARSET_GREEK_NRCS:
case TERM_CHARSET_HEBREW_DEC:
case TERM_CHARSET_HEBREW_NRCS:
case TERM_CHARSET_ITALIAN_NRCS:
case TERM_CHARSET_NORWEGIAN_DANISH_NRCS:
case TERM_CHARSET_PORTUGUESE_NRCS:
case TERM_CHARSET_RUSSIAN_NRCS:
case TERM_CHARSET_SCS_NRCS:
case TERM_CHARSET_SPANISH_NRCS:
case TERM_CHARSET_SWEDISH_NRCS:
case TERM_CHARSET_SWISS_NRCS:
case TERM_CHARSET_TURKISH_DEC:
case TERM_CHARSET_TURKISH_NRCS:
break;
case TERM_CHARSET_USERPREF_SUPPLEMENTAL:
break;
}
if (seq->intermediates & TERM_SEQ_FLAG_POPEN)
screen->g0 = cs ? : &term_unicode_lower;
else if (seq->intermediates & TERM_SEQ_FLAG_PCLOSE)
screen->g1 = cs ? : &term_unicode_upper;
else if (seq->intermediates & TERM_SEQ_FLAG_MULT)
screen->g2 = cs ? : &term_unicode_lower;
else if (seq->intermediates & TERM_SEQ_FLAG_PLUS)
screen->g3 = cs ? : &term_unicode_upper;
else if (seq->intermediates & TERM_SEQ_FLAG_MINUS)
screen->g1 = cs ? : &term_unicode_upper;
else if (seq->intermediates & TERM_SEQ_FLAG_DOT)
screen->g2 = cs ? : &term_unicode_lower;
else if (seq->intermediates & TERM_SEQ_FLAG_SLASH)
screen->g3 = cs ? : &term_unicode_upper;
return 0;
}
static int screen_SD(term_screen *screen, const term_seq *seq) {
/*
* SD - scroll-down
* This control function moves the user window down a specified number
* of lines in page memory.
* @args[0] is the number of lines to move the
* user window up in page memory. New lines appear at the top of the
* display. Old lines disappear at the bottom of the display. You
* cannot pan past the top margin of the current page. 0 is treated
* as 1.
*
* Defaults:
* args[0]: 1
*/
unsigned int num = 1;
if (seq->args[0] > 0)
num = seq->args[0];
term_page_scroll_down(screen->page, num, &screen->attr, screen->age, NULL);
return 0;
}
static int screen_SGR(term_screen *screen, const term_seq *seq) {
/*
* SGR - select-graphics-rendition
*/
term_color *dst;
unsigned int i, code;
int v;
if (seq->n_args < 1) {
zero(screen->attr);
return 0;
}
for (i = 0; i < seq->n_args; ++i) {
v = seq->args[i];
switch (v) {
case 1:
screen->attr.bold = 1;
break;
case 3:
screen->attr.italic = 1;
break;
case 4:
screen->attr.underline = 1;
break;
case 5:
screen->attr.blink = 1;
break;
case 7:
screen->attr.inverse = 1;
break;
case 8:
screen->attr.hidden = 1;
break;
case 22:
screen->attr.bold = 0;
break;
case 23:
screen->attr.italic = 0;
break;
case 24:
screen->attr.underline = 0;
break;
case 25:
screen->attr.blink = 0;
break;
case 27:
screen->attr.inverse = 0;
break;
case 28:
screen->attr.hidden = 0;
break;
case 30 ... 37:
screen->attr.fg.ccode = v - 30 + TERM_CCODE_BLACK;
break;
case 39:
screen->attr.fg.ccode = 0;
break;
case 40 ... 47:
screen->attr.bg.ccode = v - 40 + TERM_CCODE_BLACK;
break;
case 49:
screen->attr.bg.ccode = 0;
break;
case 90 ... 97:
screen->attr.fg.ccode = v - 90 + TERM_CCODE_LIGHT_BLACK;
break;
case 100 ... 107:
screen->attr.bg.ccode = v - 100 + TERM_CCODE_LIGHT_BLACK;
break;
case 38:
/* fallthrough */
case 48:
if (v == 38)
dst = &screen->attr.fg;
else
dst = &screen->attr.bg;
++i;
if (i >= seq->n_args)
break;
switch (seq->args[i]) {
case 2:
/* 24bit-color support */
i += 3;
if (i >= seq->n_args)
break;
dst->ccode = TERM_CCODE_RGB;
dst->red = (seq->args[i - 2] >= 0) ? seq->args[i - 2] : 0;
dst->green = (seq->args[i - 1] >= 0) ? seq->args[i - 1] : 0;
dst->blue = (seq->args[i] >= 0) ? seq->args[i] : 0;
break;
case 5:
/* 256-color support */
++i;
if (i >= seq->n_args || seq->args[i] < 0)
break;
code = seq->args[i];
if (code < 16) {
dst->ccode = code;
} else if (code < 232) {
static const uint8_t bval[] = {
0x00, 0x5f, 0x87,
0xaf, 0xd7, 0xff,
};
dst->ccode = TERM_CCODE_256;
dst->c256 = code;
code -= 16;
dst->blue = bval[code % 6];
code /= 6;
dst->green = bval[code % 6];
code /= 6;
dst->red = bval[code % 6];
} else if (code < 256) {
dst->ccode = TERM_CCODE_256;
dst->c256 = code;
code = (code - 232) * 10 + 8;
dst->red = code;
dst->green = code;
dst->blue = code;
}
break;
}
break;
case -1:
/* fallthrough */
case 0:
zero(screen->attr);
break;
}
}
return 0;
}
static int screen_SI(term_screen *screen, const term_seq *seq) {
/*
* SI - shift-in
* Map G0 into GL.
*/
screen->gl = &screen->g0;
return 0;
}
static int screen_SM_ANSI(term_screen *screen, const term_seq *seq) {
/*
* SM_ANSI - set-mode-ansi
*
* TODO: implement
*/
unsigned int i;
for (i = 0; i < seq->n_args; ++i)
screen_mode_change(screen, seq->args[i], false, true);
return 0;
}
static int screen_SM_DEC(term_screen *screen, const term_seq *seq) {
/*
* SM_DEC - set-mode-dec
* This is the same as SM_ANSI but for DEC modes.
*/
unsigned int i;
for (i = 0; i < seq->n_args; ++i)
screen_mode_change(screen, seq->args[i], true, true);
return 0;
}
static int screen_SO(term_screen *screen, const term_seq *seq) {
/*
* SO - shift-out
* Map G1 into GL.
*/
screen->gl = &screen->g1;
return 0;
}
static int screen_SPA(term_screen *screen, const term_seq *seq) {
/*
* SPA - start-of-protected-area
*
* TODO: What is this?
*/
return 0;
}
static int screen_SS2(term_screen *screen, const term_seq *seq) {
/*
* SS2 - single-shift-2
* Temporarily map G2 into GL for the next graphics character.
*/
screen->glt = &screen->g2;
return 0;
}
static int screen_SS3(term_screen *screen, const term_seq *seq) {
/*
* SS3 - single-shift-3
* Temporarily map G3 into GL for the next graphics character
*/
screen->glt = &screen->g3;
return 0;
}
static int screen_ST(term_screen *screen, const term_seq *seq) {
/*
* ST - string-terminator
* The string-terminator is usually part of control-sequences and
* handled by the parser. In all other situations it is silently
* ignored.
*/
return 0;
}
static int screen_SU(term_screen *screen, const term_seq *seq) {
/*
* SU - scroll-up
* This control function moves the user window up a specified number of
* lines in page memory.
* @args[0] is the number of lines to move the
* user window down in page memory. New lines appear at the bottom of
* the display. Old lines disappear at the top of the display. You
* cannot pan past the bottom margin of the current page. 0 is treated
* as 1.
*
* Defaults:
* args[0]: 1
*/
unsigned int num = 1;
if (seq->args[0] > 0)
num = seq->args[0];
term_page_scroll_up(screen->page, num, &screen->attr, screen->age, screen->history);
return 0;
}
static int screen_SUB(term_screen *screen, const term_seq *seq) {
/*
* SUB - substitute
* Cancel the current control-sequence and print a replacement
* character. Our parser already handles this so all we have to do is
* print the replacement character.
*/
static const term_seq rep = {
.type = TERM_SEQ_GRAPHIC,
.command = TERM_CMD_GRAPHIC,
.terminator = 0xfffd,
};
return screen_GRAPHIC(screen, &rep);
}
static int screen_TBC(term_screen *screen, const term_seq *seq) {
/*
* TBC - tab-clear
* This clears tab-stops. If @args[0] is 0, the tab-stop at the current
* cursor position is cleared. If it is 3, all tab stops are cleared.
*
* Defaults:
* args[0]: 0
*/
unsigned int mode = 0, pos;
if (seq->args[0] > 0)
mode = seq->args[0];
switch (mode) {
case 0:
pos = screen->cursor_x;
if (screen->page->width > 0)
screen->tabs[pos / 8] &= ~(1U << (pos % 8));
break;
case 3:
if (screen->page->width > 0)
memset(screen->tabs, 0, (screen->page->width + 7) / 8);
break;
}
return 0;
}
static int screen_VPA(term_screen *screen, const term_seq *seq) {
/*
* VPA - vertical-line-position-absolute
* VPA causes the active position to be moved to the corresponding
* horizontal position. @args[0] specifies the line to jump to. If an
* attempt is made to move the active position below the last line, then
* the active position stops on the last line. 0 is treated as 1.
*
* Defaults:
* args[0]: 1
*/
unsigned int pos = 1;
if (seq->args[0] > 0)
pos = seq->args[0];
screen_cursor_clear_wrap(screen);
screen_cursor_set_rel(screen, screen->cursor_x, pos - 1);
return 0;
}
static int screen_VPR(term_screen *screen, const term_seq *seq) {
/*
* VPR - vertical-line-position-relative
* VPR causes the active position to be moved to the corresponding
* horizontal position. @args[0] specifies the number of lines to jump
* down relative to the current cursor position. If an attempt is made
* to move the active position below the last line, the active position
* stops at the last line. 0 is treated as 1.
*
* Defaults:
* args[0]: 1
*/
unsigned int num = 1;
if (seq->args[0] > 0)
num = seq->args[0];
screen_cursor_clear_wrap(screen);
screen_cursor_down(screen, num, false);
return 0;
}
static int screen_VT(term_screen *screen, const term_seq *seq) {
/*
* VT - vertical-tab
* This causes a vertical jump by one line. Terminals treat it exactly
* the same as LF.
*/
return screen_LF(screen, seq);
}
static int screen_XTERM_CLLHP(term_screen *screen, const term_seq *seq) {
/*
* XTERM_CLLHP - xterm-cursor-lower-left-hp-bugfix
* Move the cursor to the lower-left corner of the page. This is an HP
* bugfix by xterm.
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_XTERM_IHMT(term_screen *screen, const term_seq *seq) {
/*
* XTERM_IHMT - xterm-initiate-highlight-mouse-tracking
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_XTERM_MLHP(term_screen *screen, const term_seq *seq) {
/*
* XTERM_MLHP - xterm-memory-lock-hp-bugfix
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_XTERM_MUHP(term_screen *screen, const term_seq *seq) {
/*
* XTERM_MUHP - xterm-memory-unlock-hp-bugfix
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_XTERM_RPM(term_screen *screen, const term_seq *seq) {
/*
* XTERM_RPM - xterm-restore-private-mode
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_XTERM_RRV(term_screen *screen, const term_seq *seq) {
/*
* XTERM_RRV - xterm-reset-resource-value
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_XTERM_RTM(term_screen *screen, const term_seq *seq) {
/*
* XTERM_RTM - xterm-reset-title-mode
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_XTERM_SACL1(term_screen *screen, const term_seq *seq) {
/*
* XTERM_SACL1 - xterm-set-ansi-conformance-level-1
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_XTERM_SACL2(term_screen *screen, const term_seq *seq) {
/*
* XTERM_SACL2 - xterm-set-ansi-conformance-level-2
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_XTERM_SACL3(term_screen *screen, const term_seq *seq) {
/*
* XTERM_SACL3 - xterm-set-ansi-conformance-level-3
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_XTERM_SDCS(term_screen *screen, const term_seq *seq) {
/*
* XTERM_SDCS - xterm-set-default-character-set
* Select the default character set. We treat this the same as UTF-8 as
* this is our default character set. As we always use UTF-8, this
* becomes as no-op.
*/
return 0;
}
static int screen_XTERM_SGFX(term_screen *screen, const term_seq *seq) {
/*
* XTERM_SGFX - xterm-sixel-graphics
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_XTERM_SPM(term_screen *screen, const term_seq *seq) {
/*
* XTERM_SPM - xterm-set-private-mode
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_XTERM_SRV(term_screen *screen, const term_seq *seq) {
/*
* XTERM_SRV - xterm-set-resource-value
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_XTERM_STM(term_screen *screen, const term_seq *seq) {
/*
* XTERM_STM - xterm-set-title-mode
*
* Probably not worth implementing.
*/
return 0;
}
static int screen_XTERM_SUCS(term_screen *screen, const term_seq *seq) {
/*
* XTERM_SUCS - xterm-select-utf8-character-set
* Select UTF-8 as character set. This is our default on only character
* set. Hence, this is a no-op.
*/
return 0;
}
static int screen_XTERM_WM(term_screen *screen, const term_seq *seq) {
/*
* XTERM_WM - xterm-window-management
*
* Probably not worth implementing.
*/
return 0;
}
/*
* Feeding data
* The screen_feed_*() handlers take data from the user and feed it into the
* screen. Once the parser has detected a sequence, we parse the command-type
* and forward it to the command-dispatchers.
*/
static int screen_feed_cmd(term_screen *screen, const term_seq *seq) {
switch (seq->command) {
case TERM_CMD_GRAPHIC:
return screen_GRAPHIC(screen, seq);
case TERM_CMD_BEL:
return screen_BEL(screen, seq);
case TERM_CMD_BS:
return screen_BS(screen, seq);
case TERM_CMD_CBT:
return screen_CBT(screen, seq);
case TERM_CMD_CHA:
return screen_CHA(screen, seq);
case TERM_CMD_CHT:
return screen_CHT(screen, seq);
case TERM_CMD_CNL:
return screen_CNL(screen, seq);
case TERM_CMD_CPL:
return screen_CPL(screen, seq);
case TERM_CMD_CR:
return screen_CR(screen, seq);
case TERM_CMD_CUB:
return screen_CUB(screen, seq);
case TERM_CMD_CUD:
return screen_CUD(screen, seq);
case TERM_CMD_CUF:
return screen_CUF(screen, seq);
case TERM_CMD_CUP:
return screen_CUP(screen, seq);
case TERM_CMD_CUU:
return screen_CUU(screen, seq);
case TERM_CMD_DA1:
return screen_DA1(screen, seq);
case TERM_CMD_DA2:
return screen_DA2(screen, seq);
case TERM_CMD_DA3:
return screen_DA3(screen, seq);
case TERM_CMD_DC1:
return screen_DC1(screen, seq);
case TERM_CMD_DC3:
return screen_DC3(screen, seq);
case TERM_CMD_DCH:
return screen_DCH(screen, seq);
case TERM_CMD_DECALN:
return screen_DECALN(screen, seq);
case TERM_CMD_DECANM:
return screen_DECANM(screen, seq);
case TERM_CMD_DECBI:
return screen_DECBI(screen, seq);
case TERM_CMD_DECCARA:
return screen_DECCARA(screen, seq);
case TERM_CMD_DECCRA:
return screen_DECCRA(screen, seq);
case TERM_CMD_DECDC:
return screen_DECDC(screen, seq);
case TERM_CMD_DECDHL_BH:
return screen_DECDHL_BH(screen, seq);
case TERM_CMD_DECDHL_TH:
return screen_DECDHL_TH(screen, seq);
case TERM_CMD_DECDWL:
return screen_DECDWL(screen, seq);
case TERM_CMD_DECEFR:
return screen_DECEFR(screen, seq);
case TERM_CMD_DECELF:
return screen_DECELF(screen, seq);
case TERM_CMD_DECELR:
return screen_DECELR(screen, seq);
case TERM_CMD_DECERA:
return screen_DECERA(screen, seq);
case TERM_CMD_DECFI:
return screen_DECFI(screen, seq);
case TERM_CMD_DECFRA:
return screen_DECFRA(screen, seq);
case TERM_CMD_DECIC:
return screen_DECIC(screen, seq);
case TERM_CMD_DECID:
return screen_DECID(screen, seq);
case TERM_CMD_DECINVM:
return screen_DECINVM(screen, seq);
case TERM_CMD_DECKBD:
return screen_DECKBD(screen, seq);
case TERM_CMD_DECKPAM:
return screen_DECKPAM(screen, seq);
case TERM_CMD_DECKPNM:
return screen_DECKPNM(screen, seq);
case TERM_CMD_DECLFKC:
return screen_DECLFKC(screen, seq);
case TERM_CMD_DECLL:
return screen_DECLL(screen, seq);
case TERM_CMD_DECLTOD:
return screen_DECLTOD(screen, seq);
case TERM_CMD_DECPCTERM:
return screen_DECPCTERM(screen, seq);
case TERM_CMD_DECPKA:
return screen_DECPKA(screen, seq);
case TERM_CMD_DECPKFMR:
return screen_DECPKFMR(screen, seq);
case TERM_CMD_DECRARA:
return screen_DECRARA(screen, seq);
case TERM_CMD_DECRC:
return screen_DECRC(screen, seq);
case TERM_CMD_DECREQTPARM:
return screen_DECREQTPARM(screen, seq);
case TERM_CMD_DECRPKT:
return screen_DECRPKT(screen, seq);
case TERM_CMD_DECRQCRA:
return screen_DECRQCRA(screen, seq);
case TERM_CMD_DECRQDE:
return screen_DECRQDE(screen, seq);
case TERM_CMD_DECRQKT:
return screen_DECRQKT(screen, seq);
case TERM_CMD_DECRQLP:
return screen_DECRQLP(screen, seq);
case TERM_CMD_DECRQM_ANSI:
return screen_DECRQM_ANSI(screen, seq);
case TERM_CMD_DECRQM_DEC:
return screen_DECRQM_DEC(screen, seq);
case TERM_CMD_DECRQPKFM:
return screen_DECRQPKFM(screen, seq);
case TERM_CMD_DECRQPSR:
return screen_DECRQPSR(screen, seq);
case TERM_CMD_DECRQTSR:
return screen_DECRQTSR(screen, seq);
case TERM_CMD_DECRQUPSS:
return screen_DECRQUPSS(screen, seq);
case TERM_CMD_DECSACE:
return screen_DECSACE(screen, seq);
case TERM_CMD_DECSASD:
return screen_DECSASD(screen, seq);
case TERM_CMD_DECSC:
return screen_DECSC(screen, seq);
case TERM_CMD_DECSCA:
return screen_DECSCA(screen, seq);
case TERM_CMD_DECSCL:
return screen_DECSCL(screen, seq);
case TERM_CMD_DECSCP:
return screen_DECSCP(screen, seq);
case TERM_CMD_DECSCPP:
return screen_DECSCPP(screen, seq);
case TERM_CMD_DECSCS:
return screen_DECSCS(screen, seq);
case TERM_CMD_DECSCUSR:
return screen_DECSCUSR(screen, seq);
case TERM_CMD_DECSDDT:
return screen_DECSDDT(screen, seq);
case TERM_CMD_DECSDPT:
return screen_DECSDPT(screen, seq);
case TERM_CMD_DECSED:
return screen_DECSED(screen, seq);
case TERM_CMD_DECSEL:
return screen_DECSEL(screen, seq);
case TERM_CMD_DECSERA:
return screen_DECSERA(screen, seq);
case TERM_CMD_DECSFC:
return screen_DECSFC(screen, seq);
case TERM_CMD_DECSKCV:
return screen_DECSKCV(screen, seq);
case TERM_CMD_DECSLCK:
return screen_DECSLCK(screen, seq);
case TERM_CMD_DECSLE:
return screen_DECSLE(screen, seq);
case TERM_CMD_DECSLPP:
return screen_DECSLPP(screen, seq);
case TERM_CMD_DECSLRM_OR_SC:
return screen_DECSLRM_OR_SC(screen, seq);
case TERM_CMD_DECSMBV:
return screen_DECSMBV(screen, seq);
case TERM_CMD_DECSMKR:
return screen_DECSMKR(screen, seq);
case TERM_CMD_DECSNLS:
return screen_DECSNLS(screen, seq);
case TERM_CMD_DECSPP:
return screen_DECSPP(screen, seq);
case TERM_CMD_DECSPPCS:
return screen_DECSPPCS(screen, seq);
case TERM_CMD_DECSPRTT:
return screen_DECSPRTT(screen, seq);
case TERM_CMD_DECSR:
return screen_DECSR(screen, seq);
case TERM_CMD_DECSRFR:
return screen_DECSRFR(screen, seq);
case TERM_CMD_DECSSCLS:
return screen_DECSSCLS(screen, seq);
case TERM_CMD_DECSSDT:
return screen_DECSSDT(screen, seq);
case TERM_CMD_DECSSL:
return screen_DECSSL(screen, seq);
case TERM_CMD_DECST8C:
return screen_DECST8C(screen, seq);
case TERM_CMD_DECSTBM:
return screen_DECSTBM(screen, seq);
case TERM_CMD_DECSTR:
return screen_DECSTR(screen, seq);
case TERM_CMD_DECSTRL:
return screen_DECSTRL(screen, seq);
case TERM_CMD_DECSWBV:
return screen_DECSWBV(screen, seq);
case TERM_CMD_DECSWL:
return screen_DECSWL(screen, seq);
case TERM_CMD_DECTID:
return screen_DECTID(screen, seq);
case TERM_CMD_DECTME:
return screen_DECTME(screen, seq);
case TERM_CMD_DECTST:
return screen_DECTST(screen, seq);
case TERM_CMD_DL:
return screen_DL(screen, seq);
case TERM_CMD_DSR_ANSI:
return screen_DSR_ANSI(screen, seq);
case TERM_CMD_DSR_DEC:
return screen_DSR_DEC(screen, seq);
case TERM_CMD_ECH:
return screen_ECH(screen, seq);
case TERM_CMD_ED:
return screen_ED(screen, seq);
case TERM_CMD_EL:
return screen_EL(screen, seq);
case TERM_CMD_ENQ:
return screen_ENQ(screen, seq);
case TERM_CMD_EPA:
return screen_EPA(screen, seq);
case TERM_CMD_FF:
return screen_FF(screen, seq);
case TERM_CMD_HPA:
return screen_HPA(screen, seq);
case TERM_CMD_HPR:
return screen_HPR(screen, seq);
case TERM_CMD_HT:
return screen_HT(screen, seq);
case TERM_CMD_HTS:
return screen_HTS(screen, seq);
case TERM_CMD_HVP:
return screen_HVP(screen, seq);
case TERM_CMD_ICH:
return screen_ICH(screen, seq);
case TERM_CMD_IL:
return screen_IL(screen, seq);
case TERM_CMD_IND:
return screen_IND(screen, seq);
case TERM_CMD_LF:
return screen_LF(screen, seq);
case TERM_CMD_LS1R:
return screen_LS1R(screen, seq);
case TERM_CMD_LS2:
return screen_LS2(screen, seq);
case TERM_CMD_LS2R:
return screen_LS2R(screen, seq);
case TERM_CMD_LS3:
return screen_LS3(screen, seq);
case TERM_CMD_LS3R:
return screen_LS3R(screen, seq);
case TERM_CMD_MC_ANSI:
return screen_MC_ANSI(screen, seq);
case TERM_CMD_MC_DEC:
return screen_MC_DEC(screen, seq);
case TERM_CMD_NEL:
return screen_NEL(screen, seq);
case TERM_CMD_NP:
return screen_NP(screen, seq);
case TERM_CMD_NULL:
return screen_NULL(screen, seq);
case TERM_CMD_PP:
return screen_PP(screen, seq);
case TERM_CMD_PPA:
return screen_PPA(screen, seq);
case TERM_CMD_PPB:
return screen_PPB(screen, seq);
case TERM_CMD_PPR:
return screen_PPR(screen, seq);
case TERM_CMD_RC:
return screen_RC(screen, seq);
case TERM_CMD_REP:
return screen_REP(screen, seq);
case TERM_CMD_RI:
return screen_RI(screen, seq);
case TERM_CMD_RIS:
return screen_RIS(screen, seq);
case TERM_CMD_RM_ANSI:
return screen_RM_ANSI(screen, seq);
case TERM_CMD_RM_DEC:
return screen_RM_DEC(screen, seq);
case TERM_CMD_S7C1T:
return screen_S7C1T(screen, seq);
case TERM_CMD_S8C1T:
return screen_S8C1T(screen, seq);
case TERM_CMD_SCS:
return screen_SCS(screen, seq);
case TERM_CMD_SD:
return screen_SD(screen, seq);
case TERM_CMD_SGR:
return screen_SGR(screen, seq);
case TERM_CMD_SI:
return screen_SI(screen, seq);
case TERM_CMD_SM_ANSI:
return screen_SM_ANSI(screen, seq);
case TERM_CMD_SM_DEC:
return screen_SM_DEC(screen, seq);
case TERM_CMD_SO:
return screen_SO(screen, seq);
case TERM_CMD_SPA:
return screen_SPA(screen, seq);
case TERM_CMD_SS2:
return screen_SS2(screen, seq);
case TERM_CMD_SS3:
return screen_SS3(screen, seq);
case TERM_CMD_ST:
return screen_ST(screen, seq);
case TERM_CMD_SU:
return screen_SU(screen, seq);
case TERM_CMD_SUB:
return screen_SUB(screen, seq);
case TERM_CMD_TBC:
return screen_TBC(screen, seq);
case TERM_CMD_VPA:
return screen_VPA(screen, seq);
case TERM_CMD_VPR:
return screen_VPR(screen, seq);
case TERM_CMD_VT:
return screen_VT(screen, seq);
case TERM_CMD_XTERM_CLLHP:
return screen_XTERM_CLLHP(screen, seq);
case TERM_CMD_XTERM_IHMT:
return screen_XTERM_IHMT(screen, seq);
case TERM_CMD_XTERM_MLHP:
return screen_XTERM_MLHP(screen, seq);
case TERM_CMD_XTERM_MUHP:
return screen_XTERM_MUHP(screen, seq);
case TERM_CMD_XTERM_RPM:
return screen_XTERM_RPM(screen, seq);
case TERM_CMD_XTERM_RRV:
return screen_XTERM_RRV(screen, seq);
case TERM_CMD_XTERM_RTM:
return screen_XTERM_RTM(screen, seq);
case TERM_CMD_XTERM_SACL1:
return screen_XTERM_SACL1(screen, seq);
case TERM_CMD_XTERM_SACL2:
return screen_XTERM_SACL2(screen, seq);
case TERM_CMD_XTERM_SACL3:
return screen_XTERM_SACL3(screen, seq);
case TERM_CMD_XTERM_SDCS:
return screen_XTERM_SDCS(screen, seq);
case TERM_CMD_XTERM_SGFX:
return screen_XTERM_SGFX(screen, seq);
case TERM_CMD_XTERM_SPM:
return screen_XTERM_SPM(screen, seq);
case TERM_CMD_XTERM_SRV:
return screen_XTERM_SRV(screen, seq);
case TERM_CMD_XTERM_STM:
return screen_XTERM_STM(screen, seq);
case TERM_CMD_XTERM_SUCS:
return screen_XTERM_SUCS(screen, seq);
case TERM_CMD_XTERM_WM:
return screen_XTERM_WM(screen, seq);
}
return 0;
}
int term_screen_feed_text(term_screen *screen, const uint8_t *in, size_t size) {
const uint32_t *ucs4_str;
size_t i, j, ucs4_len;
const term_seq *seq;
int r;
assert_return(screen, -EINVAL);
/* Feed bytes into utf8 decoder and handle parsed ucs4 chars. We always
* treat data as UTF-8, but the parser makes sure to fall back to raw
* 8bit mode if the stream is not valid UTF-8. This should be more than
* enough to support old 7bit/8bit modes. */
for (i = 0; i < size; ++i) {
ucs4_str = term_utf8_decode(&screen->utf8, &ucs4_len, in[i]);
for (j = 0; j < ucs4_len; ++j) {
r = term_parser_feed(screen->parser, &seq, ucs4_str[j]);
if (r < 0) {
return r;
} else if (r != TERM_SEQ_NONE) {
r = screen_feed_cmd(screen, seq);
if (r < 0)
return r;
}
}
}
return 0;
}
int term_screen_feed_keyboard(term_screen *screen, uint32_t keysym, uint32_t ascii, uint32_t ucs4, unsigned int mods) {
assert_return(screen, -EINVAL);
/* TODO */
return 0;
}
int term_screen_resize(term_screen *screen, unsigned int x, unsigned int y) {
unsigned int i;
uint8_t *t;
int r;
assert_return(screen, -EINVAL);
r = term_page_reserve(screen->page_main, x, y, &screen->attr, screen->age);
if (r < 0)
return r;
r = term_page_reserve(screen->page_alt, x, y, &screen->attr, screen->age);
if (r < 0)
return r;
if (x > screen->n_tabs) {
t = realloc(screen->tabs, (x + 7) / 8);
if (!t)
return -ENOMEM;
screen->tabs = t;
screen->n_tabs = x;
}
for (i = (screen->page->width + 7) / 8 * 8; i < x; i += 8)
screen->tabs[i / 8] = 0x1;
term_page_resize(screen->page_main, x, y, &screen->attr, screen->age, screen->history);
term_page_resize(screen->page_alt, x, y, &screen->attr, screen->age, NULL);
screen->cursor_x = screen_clamp_x(screen, screen->cursor_x);
screen->cursor_y = screen_clamp_x(screen, screen->cursor_y);
screen_cursor_clear_wrap(screen);
return 0;
}
void term_screen_soft_reset(term_screen *screen) {
unsigned int i;
assert(screen);
screen->gl = &screen->g0;
screen->gr = &screen->g1;
screen->glt = NULL;
screen->grt = NULL;
screen->g0 = &term_unicode_lower;
screen->g1 = &term_unicode_upper;
screen->g2 = &term_unicode_lower;
screen->g3 = &term_unicode_upper;
screen->page = screen->page_main;
screen->history = screen->history_main;
screen->flags = TERM_FLAG_7BIT_MODE;
screen->conformance_level = TERM_CONFORMANCE_LEVEL_VT400;
screen->attr = screen->default_attr;
screen->saved.cursor_x = 0;
screen->saved.cursor_y = 0;
screen->saved.attr = screen->attr;
screen->saved.gl = screen->gl;
screen->saved.gr = screen->gr;
screen->saved.glt = NULL;
screen->saved.grt = NULL;
screen->flags = 0;
for (i = 0; i < screen->page->width; i += 8)
screen->tabs[i / 8] = 0x1;
term_page_set_scroll_region(screen->page_main, 0, screen->page->height);
term_page_set_scroll_region(screen->page_alt, 0, screen->page->height);
}
void term_screen_hard_reset(term_screen *screen) {
assert(screen);
term_screen_soft_reset(screen);
zero(screen->utf8);
screen->cursor_x = 0;
screen->cursor_y = 0;
term_page_erase(screen->page_main, 0, 0, screen->page->width, screen->page->height, &screen->attr, screen->age, false);
term_page_erase(screen->page_alt, 0, 0, screen->page->width, screen->page->height, &screen->attr, screen->age, false);
}
int term_screen_set_answerback(term_screen *screen, const char *answerback) {
char *t = NULL;
assert_return(screen, -EINVAL);
if (answerback) {
t = strdup(answerback);
if (!t)
return -ENOMEM;
}
free(screen->answerback);
screen->answerback = t;
return 0;
}