| Bugfixes: |
| * Should systemctl status \* work on all unit types, not just .service? |
| |
| * enabling an instance unit creates a pointless link, and |
| the unit will be started with getty@getty.service: |
| $ systemctl enable getty@.service |
| ln -s '/usr/lib/systemd/system/getty@.service' '/etc/systemd/system/getty.target.wants/getty@.service' |
| |
| * Dangling symlinks of .automount unit files in .wants/ directories, set up |
| automount points even when the original .automount file did not exist |
| anymore. Only the .mount unit was still around. |
| |
| * properly handle .mount unit state tracking when two mount points are stacked one on top of another on the exact same mount point. |
| |
| * shorten the message to sane length: |
| |
| Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details. |
| |
| * sd_bus_unref() is broken regarding self-references and "pseudo thread-safety". |
| See the comment in sd_bus_unref() for more.. |
| |
| External: |
| |
| * Fedora: when installing fedora with yum --installroot /var/run is a directory, not a symlink |
| https://bugzilla.redhat.com/show_bug.cgi?id=975864 |
| |
| * Fedora: add an rpmlint check that verifies that all unit files in the RPM are listed in %systemd_post macros. |
| |
| * Fedora: post FPC ticket to move add %tmpfiles_create to the packaging guidelines |
| |
| Features: |
| |
| * generator that automatically discovers btrfs subvolumes, identifies their purpose based on some xattr on them. |
| |
| * support setting empty environment variables with Environment= and EnvironmentFile= |
| |
| * tmpfiles: figure out relation between Z and m? |
| |
| * systemd-notify: fake ucred of msg to PID of parent, if that works, with fallback to our own if it doesn't. |
| |
| * machined/machinectl: sort IP addresses we return by scope and protocol |
| * machined: write NSS module for looking up IP addresses for machines |
| |
| * timer units: actually add extra delays to timer units with high AccuracySec values, don't start them already when we are awake... |
| |
| * timesyncd: |
| - hookup with networkd: NTP servers from dhcp |
| |
| * a way for container managers to turn off getty starting via $container_headless= or so... |
| |
| * figure out a nice way how we can let the admin know what child/sibling unit causes cgroup membership for a specific unit |
| |
| * add a kernel command line option to enable the debug shell |
| |
| * journalctl: add the ability to look for the most recent process of a binary. journalctl /usr/bin/X11 --pid=-1 or so... |
| |
| * set NOTIFY_SOCKET also for control processes |
| |
| * drop parsing of chkconfig header lines from service.c |
| |
| * mount_cgroup_controllers(): symlinks need to get the label applied |
| |
| * For timer units: add some mechanisms so that timer units that trigger immediately on boot do not have the services they run added to the initial transaction and thus confuse Type=idle. |
| |
| * Add RPM macros for registering/unregistering binfmt drop-ins |
| |
| * Add timeout to early-boot, and shut down the system if it is hit. Solves the laptop-in-bag problem and is useful for embedded cases |
| |
| * ImmutableSystem=yes/no or so to mount /usr, /boot read-only/invisible, and leave /var and /etc writable |
| |
| * InaccessibleHome=yes/no or so to hide /home and /run/user from a service |
| |
| * Run most system services with cgroupfs read-only and procfs with a more secure mode |
| |
| * sd-event: generate a failure of a default event loop is executed out-of-thread |
| |
| * add "M" as recursive version of "m" to tmpfiles, then use it for |
| chowning /run/log/journal (but not /var/log/journal), so that we |
| adjust the perms of journal files created before tmpfiles ran. |
| |
| * expose "Locked" property on logind sesison objects |
| |
| * add bus api to query unit file's X fields. |
| |
| * consider adding RuntimeDirectoryUser= + RuntimeDirectoryGroup= |
| |
| * sd-event: define more intervals where we will shift wakeup intervals around in, 1h, 6h, 24h, ... |
| |
| * gpt-auto-generator: |
| - Support LUKS for root devices |
| - Define new partition type for encrypted swap? Support probed LUKS for encrypted swap? |
| - Make /home automount rather than mount? |
| |
| * improve journalctl performance by loading journal files |
| lazily. Encode just enough information in the file name, so that we |
| do not have to open it to know that it is not interesting for us, for |
| the most common operations. |
| |
| * support transient mount units |
| |
| * add an "input" group to udev logic and add all input devices to it |
| |
| * add generator that pulls in systemd-network from containers when |
| CAP_NET_ADMIN is set, more than the loopback device is defined, even |
| when it is otherwise off |
| |
| * MessageQueueMessageSize= and RLimitFSIZE= (and suchlike) should use parse_iec_size(). |
| |
| * "busctl status" works only as root on dbus1, since we cannot read |
| /proc/$PID/exe |
| |
| * implement Distribute= in socket units to allow running multiple |
| service instances processing the listening socket, and open this up |
| for ReusePort= |
| |
| * socket units: support creating sockets in different namespace, |
| opening it up for JoinsNamespaceOf=. This would require to fork off |
| a tiny process that joins the namespace and creates/binds the socket |
| and passes this back to PID1 via SCM_RIGHTS. This also could be used |
| to allow Chown/chgrp on sockets without requiring NSS in PID 1. |
| |
| * New service property: maximum CPU and wallclock runtime for a service |
| |
| * introduce bus call FreezeUnit(s, b), as well as "systemctl freeze |
| $UNIT" and "systemctl thaw $UNIT" as wrappers around this. The calls |
| should SIGSTOP all unit processes in a loop until all processes of |
| it are fully stopped. This can later be used for app management by |
| desktop UIs such as gnome-shell to freeze apps that are not visible |
| on screen, not unlike how job control works on the shell |
| |
| * completions: |
| - manager property enumeration was broken when systemd moved to /usr/lib/ |
| |
| * cgroups: |
| - implement per-slice CPUFairScheduling=1 switch |
| - handle jointly mounted controllers correctly |
| - introduce high-level settings for RT budget, swappiness |
| - how to reset dynamically changed unit cgroup attributes sanely? |
| - when reloading configuration, apply new cgroup configuration |
| - when recursively showing the cgroup hierarchy, optionally also show |
| the hierarchies of child processes |
| |
| * transient units: |
| - allow creating auxiliary units with the same call |
| - add field to transient units that indicate whether systemd or somebody else saves/restores its settings, for integration with libvirt |
| - ensure scope units may be started only a single time |
| |
| * Automatically configure swap partition to use for hibernation by looking for largest swap partition on the root disk? |
| |
| * when we detect low battery and no AC on boot, show pretty splash and refuse boot |
| |
| * machined, localed: when we try to kill an empty cgroup, generate an ESRCH error over the bus |
| |
| * libsystemd-journal, libsystemd-login, libudev: add calls to easily attach these objects to sd-event event loops |
| |
| * be more careful what we export on the bus as (usec_t) 0 and (usec_t) -1 |
| |
| * unify dispatch table in systemctl_main() and friends |
| |
| * Automatically configure swap partition to use for hibernation by looking for largest swap partition on the root disk? |
| |
| * socket-proxyd: Use sd-resolve to resolve the server address |
| |
| * rfkill,backlight: we probably should run the load tools inside of the udev rules so that the state is properly initialized by the time other software sees it |
| |
| * After coming back from hibernation reset hibernation swap partition using the /dev/snapshot ioctl APIs |
| |
| * If we try to find a unit via a dangling symlink, generate a clean |
| error. Currently, we just ignore it and read the unit from the search |
| path anyway. |
| |
| * refuse boot if /etc/os-release is missing or /etc/machine-id cannot be set up |
| |
| * given that logind now lets PID 1 do all nasty work, we can |
| probably reduce the capability set it retains substantially. |
| (we need CAP_SYS_ADMIN for drmSetMaster(), so maybe not worth it) |
| |
| * btrfs raid assembly: some .device jobs stay stuck in the queue |
| |
| * make sure gdm does not use multi-user-x but the new default X configuration file, and then remove multi-user-x from systemd |
| |
| * man: the documentation of Restart= currently is very misleading and suggests the tools from ExecStartPre= might get restarted. |
| |
| * load .d/*.conf dropins for device units |
| |
| * allow implementation of InaccessibleDirectories=/ plus |
| ReadOnlyDirectories=... for whitelisting files for a service. |
| |
| * sd-bus: |
| - make AddMatch calls on dbus1 transports async |
| - when kdbus does not take our message without memfds, try again with memfds |
| - systemd-bus-proxyd needs to enforce good old XML policy |
| - port exit-on-idle logic to byebye ioctl |
| - allow updating attach flags during runtime |
| - pid1: peek into activating message when activating a service |
| - introduce sd_bus_emit_object_added()/sd_bus_emit_object_removed() that automatically includes the build-in interfaces in the list |
| - constructors for bus messages should probably not be OK with a NULL bus pointer |
| - .busname units should not use get_user_creds()/get_cgroup_creds() but instead do NSS only in temporarily forked off child |
| - see if we can drop more message validation on the sending side |
| - add API to clone sd_bus_message objects |
| - kdbus: matches against source or destination pids for an "strace -p"-like feel. Problem: The PID info needs to be available in userspace too... |
| - longer term: priority inheritance |
| - dbus spec updates: |
| - kdbus mapping |
| - NameLost/NameAcquired obsolete |
| - GVariant |
| - "const" properties (posted) |
| - path escaping |
| - update systemd.special(7) to mention that dbus.socket is only about the compatibility socket now |
| - test bloom filter generation indexes |
| - port to sd-resolve for connecting to TCP dbus servers |
| |
| * sd-event |
| - allow multiple signal handlers per signal? |
| |
| * in the final killing spree, detect processes from the root directory, and |
| complain loudly if they have argv[0][0] == '@' set. |
| https://bugzilla.redhat.com/show_bug.cgi?id=961044 |
| |
| * investigate endianness issues of UUID vs. GUID |
| |
| * dbus: when a unit failed to load (i.e. is in UNIT_ERROR state), we |
| should be able to safely try another attempt when the bus call LoadUnit() is invoked. |
| |
| * add a pam module that passes the hdd passphrase into the PAM stack and then expires it, for usage by gdm auto-login. |
| |
| * add a pam module that on password changes updates any LUKS slot where the password matches |
| |
| * maybe add a generator that looks for "systemd.run=" on the kernel cmdline for container usercases... |
| |
| * timedatctl, localectl: possibly make some commands work without the daemon, for chroot situations... |
| |
| * timedatectl: print a nicer message when enabling ntp fails because ntpd/chrony are not installed |
| |
| * cgtop: make cgtop useful in a container |
| |
| * test/: |
| - add 'set -e' to scripts in test/ |
| - make stuff in test/ work with separate output dir |
| |
| * systemctl delete x.snapshot leaves no trace in logs (at least at default level). |
| |
| * make the coredump collector tool move itself into the user's cgroup |
| so that the coredump is properly written to the user's own journal |
| file. |
| |
| * seems that when we follow symlinks to units we prefer the symlink |
| destination path over /etc and /usr. We should not do that. Instead |
| /etc should always override /run+/usr and also any symlink |
| destination. |
| |
| * when isolating, try to figure out a way how we implicitly can order |
| all units we stop before the isolating unit... |
| |
| * teach ConditionKernelCommandLine= globs or regexes (in order to match foobar={no,0,off}) |
| |
| * after all byte-wise realloc() is slow, even on glibc, so i guess we |
| need manual exponential loops after all |
| |
| * BootLoaderSpec: Clarify that the kernel has to be in $BOOT. Clarify |
| that the boot loader should be installed to the ESP. Define a way |
| how an installer can figure out whether a BLS compliant boot loader |
| is installed. |
| |
| * think about requeuing jobs when daemon-reload is issued? usecase: |
| the initrd issues a reload after fstab from the host is accessible |
| and we might want to requeue the mounts local-fs acquired through |
| that automatically. |
| |
| * systemd-inhibit: make taking delay locks useful: support sending SIGINT or SIGTERM on PrepareForSleep() |
| |
| * journal-or-kmsg is currently broken? See reverted commit 4a01181e460686d8b4a543b1dfa7f77c9e3c5ab8. |
| |
| * remove any syslog support from log.c -- we probably cannot do this before split-off udev is gone for good |
| |
| * shutdown logging: store to EFI var, and store to USB stick? |
| |
| * write UI tool that pops up emergency messages from the journal as notification |
| |
| * think about window-manager-run-as-user-service problem: exit 0 → activate shutdown.target; exit != 0 → restart service |
| |
| * use "log level" rather than "log priority" everywhere |
| |
| * timedate: have global on/off switches for auto-time (NTP), and auto-timezone that connman can subscribe to. |
| |
| * merge unit_kill_common() and unit_kill_context() |
| |
| * introduce ExecCondition= in services |
| |
| * EFI: |
| - honor language efi variables for default language selection (if there are any?) |
| - honor timezone efi variables for default timezone selection (if there are any?) |
| - change bootctl to be backed by systemd-bootd to control temporary and persistent default boot goal plus efi variables |
| |
| * maybe do not install getty@tty1.service symlink in /etc but in /usr? |
| |
| * re-enable "make check" for gtk-doc (broken for unknown reason) |
| |
| * fstab: add new mount option x-systemd-after=/foobar/waldo to allow manual dependencies to other mount points |
| https://bugzilla.redhat.com/show_bug.cgi?id=812826 |
| |
| * print a nicer explanation if people use variable/specifier expansion in ExecStart= for the first word |
| |
| * mount: turn dependency information from /proc/self/mountinfo into dependency information between systemd units. |
| |
| * logind: |
| - logind: optionally, ignore idle-hint logic for autosuspend, block suspend as long as a session is around |
| - When we update the kernel all kind of hibernation should be prohibited until shutdown/reboot |
| - logind: wakelock/opportunistic suspend support |
| - Add pretty name for seats in logind |
| - logind: allow showing logout dialog from system? |
| - we should probably handle SIGTERM/SIGINT to not leave dot files around, just in case |
| - session scopes/user unit: add RequiresMountsFor for the home directory of the user |
| - add Suspend() bus calls which take timestamps to fix double suspend issues when somebody hits suspend and closes laptop quickly. |
| - if pam_systemd is invoked by su from a process that is outside of a |
| any session we should probably just become a NOP, since that's |
| usually not a real user session but just some system code that just |
| needs setuid(). |
| |
| * exec: when deinitializating a tty device fix the perms and group, too, not only when initializing. Set access mode/gid to 0620/tty. |
| |
| * service: watchdog logic: for testing purposes allow ping, but do not require pong |
| |
| * journal: |
| - import and delete pstore filesystem content at startup |
| - journald: also get thread ID from client, plus thread name |
| - journal: when waiting for journal additions in the client always sleep at least 1s or so, in order to minimize wakeups |
| - add API to close/reopen/get fd for journal client fd in libsystemd-journal. |
| - fallback to /dev/log based logging in libsystemd-journal, if we cannot log natively? |
| - declare the local journal protocol stable in the wiki interface chart |
| - journal: reuse XZ context |
| - sd-journal: speed up sd_journal_get_data() with transparent hash table in bg |
| - journald: when dropping msgs due to ratelimit make sure to write |
| "dropped %u messages" not only when we are about to print the next |
| message that works, but alraedy after a short tiemout |
| - check if we can make journalctl by default use --follow mode inside of less if called without args? |
| - maybe add API to send pairs of iovecs via sd_journal_send |
| - journal: when writing journal auto-rotate if time jumps backwards |
| - journal: add a setgid "systemd-journal" utility to invoke from libsystemd-journal, which passes fds via STDOUT and does PK access |
| - journactl: support negative filtering, i.e. FOOBAR!="waldo", |
| and !FOOBAR for events without FOOBAR. |
| - journal: send out marker messages every now and then, and immediately sync with fdatasync() afterwards, in order to have hourly guaranteed syncs. |
| - journal-send.c, log.c: when the log socket is clogged, and we drop, count this and write a message about this when it gets unclogged again. |
| - journal: find a way to allow dropping history early, based on priority, other rules |
| - journal: When used on NFS, check payload hashes |
| - journald: check whether it is OK if the client can still modify delivered journal entries |
| - journal live copy, based on libneon (client) and libmicrohttpd (server) |
| - journald: add kernel cmdline option to disable ratelimiting for debug purposes |
| - refuse taking lower-case variable names in sd_journal_send() and friends. |
| - journald: we currently rotate only after MaxUse+MaxFilesize has been reached. |
| - journal: deal nicely with byte-by-byte copied files, especially regards header |
| - journal: store euid in journal if it differs from uid |
| - journal: sanely deal with entries which are larger than the individual file size, but where the components would fit |
| - Replace utmp, wtmp, btmp, and lastlog completely with journal |
| - journalctl: instead --after-cursor= maybe have a --cursor=XYZ+1 syntax? |
| - tmpfiles: when applying ownership to /run/log/journal, also do this for the journal fails contained in it |
| - when a kernel driver logs in a tight loop, we should ratelimit that too. |
| - journald: optionally, log debug messages to /run but everything else to /var |
| - journald: when we drop syslog messages because the syslog socket is |
| full, make sure to write how many messages are lost as first thing |
| to syslog when it works again. |
| - journald: make sure ratelimit is actually really per-service with the new cgroup changes |
| - change systemd-journal-flush into a service that stays around during |
| boot, and causes the journal to be moved back to /run on shutdown, |
| so that we do not keep /var busy. This needs to happen synchronously, |
| hence doing this via signals is not going to work. |
| |
| * document: |
| - document that deps in [Unit] sections ignore Alias= fields in |
| [Install] units of other units, unless those units are disabled |
| - man: clarify that time-sync.target is not only sysv compat but also useful otherwise. Same for similar targets |
| - document the exit codes when services fail before they are exec()ed |
| - document that service reload may be implemented as service reexec |
| - document in wiki how to map ical recurrence events to systemd timer unit calendar specifications |
| - add a man page containing packaging guidelines and recommending usage of things like Documentation=, PrivateTmp=, PrivateNetwork= and ReadOnlyDirectories=/etc /usr. |
| - document systemd-journal-flush.service properly |
| - documentation: recommend to connect the timer units of a service to the service via Also= in [Install] |
| - man: document the very specific env the shutdown drop-in tools live in |
| - man: extend runlevel(8) to mention that runlevels suck, and are dead. Maybe add runlevel(7) with a note about that too |
| - man: add more examples to man pages |
| - man: maybe sort directives in man pages, and take sections from --help and apply them to man too |
| |
| * systemctl: |
| - systemctl list-jobs - show dependencies |
| - add systemctl switch to dump transaction without executing it |
| - Add a verbose mode to "systemctl start" and friends that explains what is being done or not done |
| - "systemctl disable" on a static unit prints no message and does |
| nothing. "systemctl enable" does nothing, and gives a bad message |
| about it. Should fix both to print nice actionable messages. |
| - print nice message from systemctl --failed if there are no entries shown, and hook that into ExecStartPre of rescue.service/emergency.service |
| - add new command to systemctl: "systemctl system-reexec" which reexecs as many daemons as virtually possible |
| - systemctl enable: improve the success messages (i.e. more human readable, less shell-like) |
| - systemctl enable: fail if target to alias into does not exist? maybe show how many units are enabled afterwards? |
| - systemctl: "Journal has been rotated since unit was started." message is misleading |
| - support "systemctl stop foobar@.service" to stop all units matching a certain template |
| - Something is wrong with symlink handling of "autovt@.service" in "systemctl list-unit-files" |
| - better error message if you run systemctl without systemd running |
| - systemctl status output should should include list of triggering units and their status |
| |
| * unit install: |
| - "systemctl mask" should find all names by which a unit is accessible |
| (i.e. by scanning for symlinks to it) and link them all to /dev/null |
| - "systemctl disable" of a unit instance removes all symlinks, but should |
| only remove the instance symlink (systemctl disable of a template |
| unit however should remove them all). |
| - systemctl list-unit-files should list generated files (and probably with a new state "generated" for them, or so) |
| - systemctl: maybe add "systemctl add-wants" or so... |
| |
| * deal with sendmail/postfix exclusivity |
| |
| * timer units: |
| - timer units should get the ability to trigger when: |
| o CLOCK_REALTIME makes jumps (TFD_TIMER_CANCEL_ON_SET) |
| o DST changes |
| - Support 2012-02~4 as syntax for specifying the fourth to last day of the month. |
| - calendarspec: support value ranges with ".." notation. Example: 2013-4..8-1 |
| - when parsing calendar timestamps support the UTC timezone (even if we will not support arbitrary timezone specs, support UTC itself certainly makes sense), also support syntaxes such as +0200 |
| - Modulate timer frequency based on battery state |
| |
| * update the kernel's TZ (sys_tz) when DST changes |
| |
| * sync down the system time to the RTC when: |
| - CLOCK_REALTIME makes jumps (the user explicitely requested a time set) |
| - DST/timezone changes && ntp is active && RTC-in-localtime (never do it without ntp) |
| This takes care of syncing ntpdate updates to the RTC, and DST updates for localtime |
| mode, it will never touch the RTC if the no reliable time source is active or the |
| user did not request anything like it. |
| |
| * libunwind support for coredump pattern hook, and includes this in |
| the message for coredumps. After all, libunwind is now capable to |
| unwind coredumps since a few weeks ago. This probably requires that |
| we have nice support for multi-line messages on display in |
| logs-show.c. Alternatively: use libelfutil, which seems to be the |
| better supported alternative. |
| |
| * add libsystemd-password or so to query passwords during boot using the password agent logic |
| |
| * If we show an error about a unit (such as not showing up) and it has no Description string, then show a description string generated form the reverse of unit_name_mangle(). |
| |
| * fedup: add --unit to systemctl switch-root somehow |
| * fedup: do not delete initrd on switch-root |
| * fedup: generator |
| |
| * timedated: refuse time changes when NTP is on |
| |
| * clean up date formatting and parsing so that all absolute/relative timestamps we format can also be parsed |
| |
| * on shutdown: move utmp, wall, audit logic all into PID 1 (or logind?), get rid of systemd-update-utmp-runlevel |
| |
| * add "factory" instructions to setup an empty /etc + /var |
| - used to setup a new container from a shared /usr |
| - superset of tmpfiles model |
| - instructions shipped by packages and stored in /usr/lib/ |
| - compose /etc/passwd and /etc/group, copy files |
| - able to create uid + gid used by packages, for file ownership |
| |
| * make repeated alt-ctrl-del presses printing a dump, or even force a reboot without |
| waiting for the timeout |
| |
| * hostnamed: before returning information from /etc/machine-info.conf check the modification data and reread. Similar for localed, ... |
| |
| * currently x-systemd.timeout is lost in the initrd, since crypttab is copied into dracut, but fstab is not |
| |
| * nspawn: |
| - nspawn: --read-only is not applied recursively to submounts |
| - bind mount read-only the cgroup tree higher than nspawn |
| - nspawn: make it work for dwalsh and shared /usr containers -- tmpfs mounts as command line parameters |
| - refuses to boot containers without /etc/machine-id (OK?), and with empty /etc/machine-id (not OK). |
| - support taking a btrfs snapshot at startup and dropping it afterwards |
| |
| * cryptsetup: |
| - cryptsetup-generator: allow specification of passwords in crypttab itself |
| - move cryptsetup key caching into kernel keyctl? |
| https://bugs.freedesktop.org/show_bug.cgi?id=54982 |
| - support rd.luks.allow-discards= kernel cmdline params in cryptsetup generator |
| |
| * hw watchdog: optionally try to use the preset watchdog timeout instead of always overriding it |
| https://bugs.freedesktop.org/show_bug.cgi?id=54712 |
| |
| * after deserializing sockets in socket.c we should reapply sockopts and things |
| |
| * make timer units go away after they elapsed |
| |
| * http://lists.freedesktop.org/archives/systemd-devel/2012-September/006502.html |
| (network and remote-fs on shutdown) |
| |
| * come up with a nice way to write queue/read_ahead_kb for a block device without interfering with readahead |
| |
| * move PID 1 segfaults to /var/lib/systemd/coredump? |
| |
| * create /sbin/init symlinks from the build system |
| |
| * Query Paul Moore about relabelling socket fds while they are open |
| |
| * allow writing multiple conditions in unit files on one line |
| |
| * explore multiple service instances per listening socket idea |
| |
| * MountFlags=shared acts as MountFlags=slave right now. |
| |
| * ReadOnlyDirectories= is not applied recursively to submounts |
| |
| * drop PID 1 reloading, only do reexecing (difficult: Reload() |
| currently is properly synchronous, Reexec() is weird, because we |
| cannot delay the response properly until we are back, so instead of |
| being properly synchronous we just keep open the fd and close it |
| when done. That means clients do not get a successful method reply, |
| but much rather a disconnect on success. |
| |
| * properly handle loop back mounts via fstab, especially regards to fsck/passno |
| |
| * allow services with no ExecStart= but with an ExecStop= |
| |
| * dracut-shutdown needs to be ordered before unmounting /boot |
| |
| * initialize the hostname from the fs label of /, if /etc/hostname does not exist? |
| |
| * rename "userspace" to "core-os" |
| |
| * load-fragment: when loading a unit file via a chain of symlinks |
| verify that it is not masked via any of the names traversed. |
| |
| * introduce Type=pid-file |
| |
| * change Requires=basic.target to RequisiteOverride=basic.target |
| |
| * when breaking cycles drop sysv services first, then services from /run, then from /etc, then from /usr |
| |
| * automount: implement expire: |
| - set superblock timeout AUTOFS_DEV_IOCTL_TIMEOUT_CMD |
| - periodically run AUTOFS_DEV_IOCTL_EXPIRE_CMD |
| - every timeout/4 (original autofs logic) |
| - blocking, needs a thread |
| - run until -EAGAIN |
| - receive expire packet on pipe if kernel tells the timeout is over |
| - call umount |
| - answer expire packet on pipe with AUTOFS_DEV_IOCTL_{READY,FAIL}_CMD |
| - AUTOFS_DEV_IOCTL_EXPIRE_CMD returns |
| |
| * ExecOnFailure=/usr/bin/foo |
| |
| * udev: |
| - remove src/udev/udev-builtin-firmware.c (CONFIG_FW_LOADER_USER_HELPER=n) |
| - move to LGPL |
| - kill scsi_id |
| - add trigger --subsystem-match=usb/usb_device device |
| - reimport udev db after MOVE events for devices without dev_t |
| |
| * when a service has the same env var set twice we actually store it twice and return that in systemctl show -p... We should only show the last setting |
| |
| * introduce mix of BindTo and Requisite |
| |
| * add DeleteSocketsOnStop=yes|no option to socket units |
| |
| * There's currently no way to cancel fsck (used to be possible via C-c or c on the console) |
| |
| * add option to sockets to avoid activation. Instead just drop packets/connections, see http://cyberelk.net/tim/2012/02/15/portreserve-systemd-solution/ |
| |
| * default unix qlen is too small (10). bump sysctl? add sockopt? |
| |
| * save coredump in Windows/Mozilla minidump format |
| |
| * support crash reporting operation modes (https://live.gnome.org/GnomeOS/Design/Whiteboards/ProblemReporting) |
| |
| * default to actual 32-bit PIDs, via /proc/sys/kernel/pid_max |
| |
| * be able to specify a forced restart of service A where service B depends on, in case B |
| needs to be auto-respawned? |
| |
| * when a bus name of a service disappears from the bus make sure to queue further activation requests |
| |
| * tmpfiles: |
| - check systemd-tmpfiles for selinux context hookup for mknod(), symlink() and similar |
| - apply "x" on "D" too (see patch from William Douglas) |
| |
| * for services: do not set $HOME in services unless requested |
| |
| * hide PAM options in fragment parser when compile time disabled |
| |
| * when we automatically restart a service, ensure we restart its rdeps, too. |
| |
| * allow Type=simple with PIDFile= |
| https://bugzilla.redhat.com/show_bug.cgi?id=723942 |
| |
| * move PAM code into its own binary |
| |
| * implement Register= switch in .socket units to enable registration |
| in Avahi, RPC and other socket registration services. |
| |
| * make sure systemd-ask-password-wall does not shutdown systemd-ask-password-console too early |
| |
| * support sd_notify() style notification when reload begins (RELOADING=1), reload is finished (READY=1), and add ReloadSignal= then to use in combination |
| |
| * support sd_notify() style notification when shutting down, to make auto-exit bus services work (STOPPING=1) |
| |
| * verify that the AF_UNIX sockets of a service in the fs still exist |
| when we start a service in order to avoid confusion when a user |
| assumes starting a service is enough to make it accessible |
| |
| * support User= and Group= attributes for AF_UNIX sockets. (difficult, requires NSS from PID 1?) |
| |
| * Make it possible to set the keymap independently from the font on |
| the kernel cmdline. Right now setting one resets also the other. |
| |
| * and a dbus call to generate target from current state |
| |
| * readahead: |
| - drop /.readahead on bigger upgrades with yum |
| - move readahead files into /var (look for them with .path units?) |
| - readahead: use BTRFS_IOC_DEFRAG_RANGE instead of BTRFS_IOC_DEFRAG ioctl, with START_IO |
| - readahead: when bumping /sys readahead variable save mtime and compare later to detect changes |
| - readahead: make use of EXT4_IOC_MOVE_EXT, as used by http://e4rat.sourceforge.net/ |
| |
| * add support for /bin/mount -s |
| |
| * GC unreferenced jobs (such as .device jobs) |
| |
| * write blog stories about: |
| - hwdb: what belongs into it, lsusb |
| - enabling dbus services |
| - status update |
| - how to make changes to sysctl and sysfs attributes |
| - remote access |
| - how to pass throw-away units to systemd, or dynamically change properties of existing units |
| - how to integrate cgconfig and suchlike with systemd |
| - testing with Harald's awesome test kit |
| - auto-restart |
| - how to develop against journal browsing APIs |
| - the journal HTTP iface |
| - non-cgroup resource management |
| - dynamic resource management with cgroups |
| - refreshed, longer missions statement |
| - calendar time events |
| - init=/bin/sh vs. "emergency" mode, vs. "rescue" mode, vs. "multi-user" mode, vs. "graphical" mode, and the debug shell |
| - how to create your own target |
| - instantiated apache, dovecot and so on |
| - hooking a script into various stages of shutdown/rearly booot |
| |
| * allow port=0 in .socket units |
| |
| * support systemd.mask= on the kernel command line. |
| |
| * recreate systemd's D-Bus private socket file on SIGUSR2 |
| |
| * Support --test based on current system state |
| |
| * investigate whether the gnome pty helper should be moved into systemd, to provide cgroup support. |
| |
| * maybe introduce ExecRestartPre= |
| |
| * dot output for --test showing the 'initial transaction' |
| |
| * fingerprint.target, wireless.target, gps.target, netdevice.target |
| |
| * drop cap bounding set in readahead and other services |
| |
| * systemd-python: |
| - figure out a simple way to wait for journal events in a way that |
| works with ^C |
| - add documentation to systemd.daemon |
| |
| * bootchart: |
| - plot per-process IO utilization |
| - group processes based on service association (cgroups) |
| - document initcall_debug |
| - kernel cmdline "bootchart" option for simplicity? |
| |
| * udev-link-config: |
| - Make sure ID_PATH is always exported and complete for |
| network devices where possible, so we can safely rely |
| on Path= matching |
| - check MTUBytes parsing (expecting size_t but we are using unsigned) |
| |
| * sd-rtnl: |
| - add support for more attribute types |
| - inbuilt piping support (essentially degenerate async)? see loopback-setup.c and other places |
| |
| * networkd: |
| - add more keys to [Route] and [Address] sections |
| - add support for more DHCPv4 options (and, longer term, other kinds of dynamic config) |
| - send hostname to DHCP server |
| - add proper initrd support (in particular generate .network/.link files based on /proc/cmdline) |
| - add reduced [Link] support to .network files |
| - add Scope= parsing option for [Network] |
| - properly handle routerless dhcp leases |
| - set lifetime on the address acquired from dhcp |
| - patch kernel to support module alias for tunnel device (ipip/sit/gre), |
| then remove remove libkmod dependency and CAP_SYS_MODULE |
| - add veth netdev support (c.f. http://shorewall.net/bridge-Shorewall-perl.html#veth) |
| - add tun/tap netdev support |
| - add more attribute support for SIT tunnel |
| |
| * networkd-wait-online: |
| - make operstates to wait for configurable? |
| |
| * dhcp: |
| - figure out how much we can increase Maximum Message Size |
| - export timezone information |
| - FORCERENEW |
| |
| External: |
| |
| * dbus: |
| - natively watch for dbus-*.service symlinks (PENDING) |
| - teach dbus to activate all services it finds in /etc/systemd/services/org-*.service |
| |
| * fix alsa mixer restore to not print error when no config is stored |
| |
| * make cryptsetup lower --iter-time |
| |
| * patch kernel for xattr support in /dev, /proc/, /sys? |
| |
| * kernel: add device_type = "fb", "fbcon" to class "graphics" |
| |
| * drop accountsservice's StandardOutput=syslog and Type=dbus fields |
| |
| * dbus upstream still refers to dbus.target and should not |
| |
| * dbus: in fedora, make /var/lib/dbus/machine-id a symlink to /etc/machine-id |
| |
| * add "# export SYSTEMD_PAGER=" to bash login |
| |
| * /usr/bin/service should actually show the new command line |
| |
| * fedora: suggest auto-restart on failure, but not on success and not on coredump. also, ask people to think about changing the start limit logic. Also point people to RestartPreventExitStatus=, SuccessExitStatus= |
| |
| * fedora: F20: go timer units all the way, leave cron.daily for cron |
| |
| * neither pkexec nor sudo initialize environ[] from the PAM environment? |
| |
| * fedora: update policy to declare access mode and ownership of unit files to root:root 0644, and add an rpmlint check for it |
| |
| * register catalog database signature as file magic |
| |
| Regularly: |
| |
| * look for close() vs. close_nointr() vs. close_nointr_nofail() |
| |
| * check for strerror(r) instead of strerror(-r) |
| |
| * Use PR_SET_PROCTITLE_AREA if it becomes available in the kernel |
| |
| * pahole |
| |
| * set_put(), hashmap_put() return values check. i.e. == 0 does not free()! |
| |
| * use secure_getenv() instead of getenv() where appropriate |
| |
| * link up selected blog stories from man pages and unit files Documentation= fields |
| |
| Scheduled for removal or fixing: |
| |
| * xxxOverridable dependencies (probably: fix) |