| <?xml version='1.0'?> <!--*-nxml-*--> |
| <!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" |
| "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" [ |
| <!ENTITY % entities SYSTEM "custom-entities.ent" > |
| %entities; |
| ]> |
| |
| <!-- |
| This file is part of systemd. |
| |
| Copyright 2010 Lennart Poettering |
| |
| systemd is free software; you can redistribute it and/or modify it |
| under the terms of the GNU Lesser General Public License as published by |
| the Free Software Foundation; either version 2.1 of the License, or |
| (at your option) any later version. |
| |
| systemd is distributed in the hope that it will be useful, but |
| WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| Lesser General Public License for more details. |
| |
| You should have received a copy of the GNU Lesser General Public License |
| along with systemd; If not, see <http://www.gnu.org/licenses/>. |
| --> |
| |
| <refentry id="systemd.unit"> |
| |
| <refentryinfo> |
| <title>systemd.unit</title> |
| <productname>systemd</productname> |
| |
| <authorgroup> |
| <author> |
| <contrib>Developer</contrib> |
| <firstname>Lennart</firstname> |
| <surname>Poettering</surname> |
| <email>lennart@poettering.net</email> |
| </author> |
| </authorgroup> |
| </refentryinfo> |
| |
| <refmeta> |
| <refentrytitle>systemd.unit</refentrytitle> |
| <manvolnum>5</manvolnum> |
| </refmeta> |
| |
| <refnamediv> |
| <refname>systemd.unit</refname> |
| <refpurpose>Unit configuration</refpurpose> |
| </refnamediv> |
| |
| <refsynopsisdiv> |
| <para><filename><replaceable>service</replaceable>.service</filename>, |
| <filename><replaceable>socket</replaceable>.socket</filename>, |
| <filename><replaceable>device</replaceable>.device</filename>, |
| <filename><replaceable>mount</replaceable>.mount</filename>, |
| <filename><replaceable>automount</replaceable>.automount</filename>, |
| <filename><replaceable>swap</replaceable>.swap</filename>, |
| <filename><replaceable>target</replaceable>.target</filename>, |
| <filename><replaceable>path</replaceable>.path</filename>, |
| <filename><replaceable>timer</replaceable>.timer</filename>, |
| <filename><replaceable>snapshot</replaceable>.snapshot</filename></para> |
| |
| <para><literallayout><filename>/etc/systemd/system/*</filename> |
| <filename>/run/systemd/system/*</filename> |
| <filename>/usr/lib/systemd/system/*</filename> |
| <filename>...</filename> |
| </literallayout></para> |
| |
| <para><literallayout><filename>/etc/systemd/user/*</filename> |
| <filename>/run/systemd/user/*</filename> |
| <filename>/usr/lib/systemd/user/*</filename> |
| <filename>...</filename> |
| </literallayout></para> |
| </refsynopsisdiv> |
| |
| <refsect1> |
| <title>Description</title> |
| |
| <para>A unit configuration file encodes information |
| about a service, a socket, a device, a mount point, an |
| automount point, a swap file or partition, a start-up |
| target, a file system path, or a timer controlled and |
| supervised by |
| <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>. The |
| syntax is inspired by <ulink |
| url="http://standards.freedesktop.org/desktop-entry-spec/latest/">XDG |
| Desktop Entry Specification</ulink> <filename>.desktop</filename> files, which are in turn |
| inspired by Microsoft Windows |
| <filename>.ini</filename> files.</para> |
| |
| <para>This man page lists the common configuration |
| options of all the unit types. These options need to |
| be configured in the [Unit] or [Install] |
| sections of the unit files.</para> |
| |
| <para>In addition to the generic [Unit] and [Install] |
| sections described here, each unit may have a |
| type-specific section, e.g. [Service] for a service |
| unit. See the respective man pages for more |
| information: |
| <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>, |
| <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>, |
| <citerefentry><refentrytitle>systemd.device</refentrytitle><manvolnum>5</manvolnum></citerefentry>, |
| <citerefentry><refentrytitle>systemd.mount</refentrytitle><manvolnum>5</manvolnum></citerefentry>, |
| <citerefentry><refentrytitle>systemd.automount</refentrytitle><manvolnum>5</manvolnum></citerefentry>, |
| <citerefentry><refentrytitle>systemd.swap</refentrytitle><manvolnum>5</manvolnum></citerefentry>, |
| <citerefentry><refentrytitle>systemd.target</refentrytitle><manvolnum>5</manvolnum></citerefentry>, |
| <citerefentry><refentrytitle>systemd.path</refentrytitle><manvolnum>5</manvolnum></citerefentry>, |
| <citerefentry><refentrytitle>systemd.timer</refentrytitle><manvolnum>5</manvolnum></citerefentry>, |
| <citerefentry><refentrytitle>systemd.snapshot</refentrytitle><manvolnum>5</manvolnum></citerefentry>. |
| </para> |
| |
| <para>Unit files are loaded from a set of paths |
| determined during compilation, described in the next section. |
| </para> |
| |
| <para>Unit files may contain additional options on top |
| of those listed here. If systemd encounters an unknown |
| option it will write a warning log message but |
| continue loading the unit. If an option is prefixed |
| with <option>X-</option> it is ignored completely by |
| systemd. Applications may use this to include |
| additional information in the unit files.</para> |
| |
| <para>Boolean arguments used in unit files can be |
| written in various formats. For positive settings the |
| strings <option>1</option>, <option>yes</option>, |
| <option>true</option> and <option>on</option> are |
| equivalent. For negative settings the strings |
| <option>0</option>, <option>no</option>, |
| <option>false</option> and <option>off</option> are |
| equivalent.</para> |
| |
| <para>Time span values encoded in unit files can be |
| written in various formats. A stand-alone number |
| specifies a time in seconds. If suffixed with a time |
| unit, the unit is honored. A concatenation of multiple |
| values with units is supported, in which case the |
| values are added up. Example: "50" refers to 50 |
| seconds; "2min 200ms" refers to 2 minutes plus 200 |
| milliseconds, i.e. 120200ms. The following time units |
| are understood: s, min, h, d, w, ms, us. For details |
| see |
| <citerefentry><refentrytitle>systemd.time</refentrytitle><manvolnum>7</manvolnum></citerefentry>.</para> |
| |
| <para>Empty lines and lines starting with # or ; are |
| ignored. This may be used for commenting. Lines ending |
| in a backslash are concatenated with the following |
| line while reading and the backslash is replaced by a |
| space character. This may be used to wrap long lines.</para> |
| |
| <para>Along with a unit file |
| <filename>foo.service</filename> the directory |
| <filename>foo.service.wants/</filename> may exist. All |
| unit files symlinked from such a directory are |
| implicitly added as dependencies of type |
| <varname>Wanted=</varname> to the unit. This is useful |
| to hook units into the start-up of other units, |
| without having to modify their unit files. For details |
| about the semantics of <varname>Wanted=</varname> see |
| below. The preferred way to create symlinks in the |
| <filename>.wants/</filename> directory of a unit file |
| is with the <command>enable</command> command of the |
| <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry> |
| tool which reads information from the [Install] |
| section of unit files (see below). A similar |
| functionality exists for <varname>Requires=</varname> |
| type dependencies as well, the directory suffix is |
| <filename>.requires/</filename> in this case.</para> |
| |
| <para>Along with a unit file |
| <filename>foo.service</filename> a directory |
| <filename>foo.service.d/</filename> may exist. All |
| files with the suffix <filename>.conf</filename> from |
| this directory will be parsed after the file itself is |
| parsed. This is useful to alter or add configuration |
| settings to a unit, without having to modify their |
| unit files. Make sure that the file that is included |
| has the appropriate section headers before any |
| directive.</para> |
| |
| <para>If a line starts with <option>.include</option> |
| followed by a file name, the specified file will be |
| parsed at this point. Make sure that the file that is |
| included has the appropriate section headers before |
| any directives.</para> |
| |
| <para>Note that while systemd offers a flexible |
| dependency system between units it is recommended to |
| use this functionality only sparingly and instead rely |
| on techniques such as bus-based or socket-based |
| activation which make dependencies implicit, resulting |
| in a both simpler and more flexible system.</para> |
| |
| <para>Some unit names reflect paths existing in the |
| file system name space. Example: a device unit |
| <filename>dev-sda.device</filename> refers to a device |
| with the device node <filename>/dev/sda</filename> in |
| the file system namespace. If this applies a special |
| way to escape the path name is used, so that the |
| result is usable as part of a file name. Basically, |
| given a path, "/" is replaced by "-", and all |
| unprintable characters and the "-" are replaced by |
| C-style "\x20" escapes. The root directory "/" is |
| encoded as single dash, while otherwise the initial |
| and ending "/" is removed from all paths during |
| transformation. This escaping is reversible.</para> |
| |
| <para>Optionally, units may be instantiated from a |
| template file at runtime. This allows creation of |
| multiple units from a single configuration file. If |
| systemd looks for a unit configuration file it will |
| first search for the literal unit name in the |
| filesystem. If that yields no success and the unit |
| name contains an @ character, systemd will look for a |
| unit template that shares the same name but with the |
| instance string (i.e. the part between the @ character |
| and the suffix) removed. Example: if a service |
| <filename>getty@tty3.service</filename> is requested |
| and no file by that name is found, systemd will look |
| for <filename>getty@.service</filename> and |
| instantiate a service from that configuration file if |
| it is found.</para> |
| |
| <para>To refer to the instance string from |
| within the configuration file you may use the special |
| <literal>%i</literal> specifier in many of the |
| configuration options. See below for details.</para> |
| |
| <para>If a unit file is empty (i.e. has the file size |
| 0) or is symlinked to <filename>/dev/null</filename> |
| its configuration will not be loaded and it appears |
| with a load state of <literal>masked</literal>, and |
| cannot be activated. Use this as an effective way to |
| fully disable a unit, making it impossible to start it |
| even manually.</para> |
| |
| <para>The unit file format is covered by the |
| <ulink |
| url="http://www.freedesktop.org/wiki/Software/systemd/InterfaceStabilityPromise">Interface |
| Stability Promise</ulink>.</para> |
| |
| </refsect1> |
| |
| <refsect1> |
| <title>Unit load path</title> |
| |
| <para>Unit files are loaded from a set of paths |
| determined during compilation, described in the two |
| tables below. Unit files found in directories higher |
| in the hierarchy override files with the same name |
| lower in the hierarchy, thus allowing overrides. |
| </para> |
| |
| <para>When systemd is running in session mode |
| (<option>--user</option>) and the variable |
| <varname>$SYSTEMD_UNIT_PATH</varname> is set, this |
| contents of this variable overrides the unit load |
| path. |
| </para> |
| |
| <table> |
| <title> |
| Load path when running in system mode (<option>--system</option>). |
| </title> |
| |
| <tgroup cols='2'> |
| <colspec colname='path' /> |
| <colspec colname='expl' /> |
| <thead> |
| <row> |
| <entry>Path</entry> |
| <entry>Description</entry> |
| </row> |
| </thead> |
| <tbody> |
| <row> |
| <entry><filename>/run/systemd/generator.early</filename></entry> |
| <entry>Generated units</entry> |
| </row> |
| <row> |
| <entry><filename>&SYSTEM_CONFIG_UNIT_PATH;</filename></entry> |
| <entry morerows='1'>Local configuration</entry> |
| </row> |
| <row> |
| <entry><filename>/etc/systemd/system</filename></entry> |
| </row> |
| <row> |
| <entry><filename>/run/systemd/systemd</filename></entry> |
| <entry>Volatile units</entry> |
| </row> |
| <row> |
| <entry><filename>/run/systemd/generator</filename></entry> |
| <entry>Generated units</entry> |
| </row> |
| <row> |
| <entry><filename>/usr/local/lib/systemd/system</filename></entry> |
| <entry>Units for local packages</entry> |
| </row> |
| <row> |
| <entry><filename>&systemunitdir;</filename></entry> |
| <entry>Systemd package configuration</entry> |
| </row> |
| <row> |
| <entry><filename>/usr/lib/systemd/system</filename></entry> |
| <entry morerows='1'>Units for installed packages</entry> |
| </row> |
| <row> |
| <entry><filename>/lib/systemd/system</filename></entry> |
| </row> |
| <row> |
| <entry><filename>/run/systemd/generator.late</filename></entry> |
| <entry>Generated units</entry> |
| </row> |
| </tbody> |
| </tgroup> |
| </table> |
| |
| <table> |
| <title> |
| Load path when running in session mode (<option>--user</option>). |
| </title> |
| |
| <tgroup cols='2'> |
| <colspec colname='path' /> |
| <colspec colname='expl' /> |
| <thead> |
| <row> |
| <entry>Path</entry> |
| <entry>Description</entry> |
| </row> |
| </thead> |
| <tbody> |
| <row> |
| <entry><filename>/tmp/systemd-generator.early.<replaceable>XXXXXX</replaceable></filename></entry> |
| <entry>Generated units</entry> |
| </row> |
| <row> |
| <entry><filename>&USER_CONFIG_UNIT_PATH;</filename></entry> |
| <entry morerows='1'>Local configuration</entry> |
| </row> |
| <row> |
| <entry><filename>/etc/systemd/user</filename></entry> |
| </row> |
| <row> |
| <entry><filename>/run/systemd/user</filename></entry> |
| <entry>Volatile units</entry> |
| </row> |
| <row> |
| <entry><filename>/tmp/systemd-generator.<replaceable>XXXXXX</replaceable></filename></entry> |
| <entry>Generated units</entry> |
| </row> |
| <row> |
| <entry><filename>/usr/local/lib/systemd/user</filename></entry> |
| <entry morerows='1'>Units for local packages</entry> |
| </row> |
| <row> |
| <entry><filename>/usr/local/share/systemd/user</filename></entry> |
| </row> |
| <row> |
| <entry><filename>&userunitdir;</filename></entry> |
| <entry>Systemd package configuration</entry> |
| </row> |
| <row> |
| <entry><filename>/usr/lib/systemd/user</filename></entry> |
| <entry morerows='1'>Units for installed packages</entry> |
| </row> |
| <row> |
| <entry><filename>/usr/share/systemd/user</filename></entry> |
| </row> |
| <row> |
| <entry><filename>/tmp/systemd-generator.late.<replaceable>XXXXXX</replaceable></filename></entry> |
| <entry>Generated units</entry> |
| </row> |
| </tbody> |
| </tgroup> |
| </table> |
| |
| <para>Note: the paths listed above are set at |
| compilation time and differ between distributions. The |
| "authorative" list is printed by |
| <command>systemd</command> at during start and daemon |
| reconfiguration.</para> |
| |
| <para>Additional units might be loaded into systemd |
| ("linked") from directories not on the unit load |
| path. See the <command>link</command> command for |
| <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>. |
| </para> |
| </refsect1> |
| |
| <refsect1> |
| <title>Options</title> |
| |
| <para>Unit file may include a [Unit] section, which |
| carries generic information about the unit that is not |
| dependent on the type of unit:</para> |
| |
| <variablelist class='unit-directives'> |
| |
| <varlistentry> |
| <term><varname>Description=</varname></term> |
| <listitem><para>A free-form string |
| describing the unit. This is intended |
| for use in UIs to show descriptive |
| information along with the unit |
| name.</para></listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>Documentation=</varname></term> |
| <listitem><para>A space separated list |
| of URIs referencing documentation for |
| this unit or its |
| configuration. Accepted are only URIs |
| of the types |
| <literal>http://</literal>, |
| <literal>https://</literal>, |
| <literal>file:</literal>, |
| <literal>info:</literal>, |
| <literal>man:</literal>. For more |
| information about the syntax of these |
| URIs see |
| <citerefentry><refentrytitle>uri</refentrytitle><manvolnum>7</manvolnum></citerefentry>. The |
| URIs should be listed in order of |
| relevance, starting with the most |
| relevant. It is a good idea to first |
| reference documentation that explains |
| what the unit's purpose is, followed |
| by how it is configured, followed by |
| any other related documentation. This |
| option may be specified more than once |
| in which case the specified list of |
| URIs is merged. If the empty string is |
| assigned to this option the list is |
| reset and all prior assignments will |
| have no effect.</para></listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>Requires=</varname></term> |
| |
| <listitem><para>Configures requirement |
| dependencies on other units. If this |
| unit gets activated, the units listed |
| here will be activated as well. If one |
| of the other units gets deactivated or |
| its activation fails, this unit will |
| be deactivated. This option may be |
| specified more than once, in which |
| case requirement dependencies for all |
| listed names are created. Note that |
| requirement dependencies do not |
| influence the order in which services |
| are started or stopped. This has to be |
| configured independently with the |
| <varname>After=</varname> or |
| <varname>Before=</varname> options. If |
| a unit |
| <filename>foo.service</filename> |
| requires a unit |
| <filename>bar.service</filename> as |
| configured with |
| <varname>Requires=</varname> and no |
| ordering is configured with |
| <varname>After=</varname> or |
| <varname>Before=</varname>, then both |
| units will be started simultaneously |
| and without any delay between them if |
| <filename>foo.service</filename> is |
| activated. Often it is a better choice |
| to use <varname>Wants=</varname> |
| instead of |
| <varname>Requires=</varname> in order |
| to achieve a system that is more |
| robust when dealing with failing |
| services.</para> |
| |
| <para>Note that dependencies of this |
| type may also be configured outside of |
| the unit configuration file by |
| adding a symlink to a |
| <filename>.requires/</filename> directory |
| accompanying the unit file. For |
| details see above.</para></listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>RequiresOverridable=</varname></term> |
| |
| <listitem><para>Similar to |
| <varname>Requires=</varname>. |
| Dependencies listed in |
| <varname>RequiresOverridable=</varname> |
| which cannot be fulfilled or fail to |
| start are ignored if the startup was |
| explicitly requested by the user. If |
| the start-up was pulled in indirectly |
| by some dependency or automatic |
| start-up of units that is not |
| requested by the user this dependency |
| must be fulfilled and otherwise the |
| transaction fails. Hence, this option |
| may be used to configure dependencies |
| that are normally honored unless the |
| user explicitly starts up the unit, in |
| which case whether they failed or not |
| is irrelevant.</para></listitem> |
| |
| </varlistentry> |
| <varlistentry> |
| <term><varname>Requisite=</varname></term> |
| <term><varname>RequisiteOverridable=</varname></term> |
| |
| <listitem><para>Similar to |
| <varname>Requires=</varname> |
| and <varname>RequiresOverridable=</varname>, respectively. However, |
| if a unit listed here is not started |
| already it will not be started and the |
| transaction fails |
| immediately.</para></listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>Wants=</varname></term> |
| |
| <listitem><para>A weaker version of |
| <varname>Requires=</varname>. A unit |
| listed in this option will be started |
| if the configuring unit is. However, |
| if the listed unit fails to start up |
| or cannot be added to the transaction |
| this has no impact on the validity of |
| the transaction as a whole. This is |
| the recommended way to hook start-up |
| of one unit to the start-up of another |
| unit.</para> |
| |
| <para>Note that dependencies of this |
| type may also be configured outside of |
| the unit configuration file by |
| adding a symlink to a |
| <filename>.wants/</filename> directory |
| accompanying the unit file. For |
| details see above.</para></listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>BindsTo=</varname></term> |
| |
| <listitem><para>Configures requirement |
| dependencies, very similar in style to |
| <varname>Requires=</varname>, however |
| in addition to this behavior it also |
| declares that this unit is stopped |
| when any of the units listed suddenly |
| disappears. Units can suddenly, |
| unexpectedly disappear if a service |
| terminates on its own choice, a device |
| is unplugged or a mount point |
| unmounted without involvement of |
| systemd.</para></listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>PartOf=</varname></term> |
| |
| <listitem><para>Configures dependencies |
| similar to <varname>Requires=</varname>, |
| but limited to stopping and restarting |
| of units. When systemd stops or restarts |
| the units listed here, the action is |
| propagated to this unit. |
| Note that this is a one way dependency - |
| changes to this unit do not affect the |
| listed units. |
| </para></listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>Conflicts=</varname></term> |
| |
| <listitem><para>Configures negative |
| requirement dependencies. If a unit |
| has a |
| <varname>Conflicts=</varname> setting |
| on another unit, starting the former |
| will stop the latter and vice |
| versa. Note that this setting is |
| independent of and orthogonal to the |
| <varname>After=</varname> and |
| <varname>Before=</varname> ordering |
| dependencies.</para> |
| |
| <para>If a unit A that conflicts with |
| a unit B is scheduled to be started at |
| the same time as B, the transaction |
| will either fail (in case both are |
| required part of the transaction) or |
| be modified to be fixed (in case one |
| or both jobs are not a required part |
| of the transaction). In the latter |
| case the job that is not the required |
| will be removed, or in case both are |
| not required the unit that conflicts |
| will be started and the unit that is |
| conflicted is |
| stopped.</para></listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>Before=</varname></term> |
| <term><varname>After=</varname></term> |
| |
| <listitem><para>Configures ordering |
| dependencies between units. If a unit |
| <filename>foo.service</filename> |
| contains a setting |
| <option>Before=bar.service</option> |
| and both units are being started, |
| <filename>bar.service</filename>'s |
| start-up is delayed until |
| <filename>foo.service</filename> is |
| started up. Note that this setting is |
| independent of and orthogonal to the |
| requirement dependencies as configured |
| by <varname>Requires=</varname>. It is |
| a common pattern to include a unit |
| name in both the |
| <varname>After=</varname> and |
| <varname>Requires=</varname> option in |
| which case the unit listed will be |
| started before the unit that is |
| configured with these options. This |
| option may be specified more than |
| once, in which case ordering |
| dependencies for all listed names are |
| created. <varname>After=</varname> is |
| the inverse of |
| <varname>Before=</varname>, i.e. while |
| <varname>After=</varname> ensures that |
| the configured unit is started after |
| the listed unit finished starting up, |
| <varname>Before=</varname> ensures the |
| opposite, i.e. that the configured |
| unit is fully started up before the |
| listed unit is started. Note that when |
| two units with an ordering dependency |
| between them are shut down, the |
| inverse of the start-up order is |
| applied. i.e. if a unit is configured |
| with <varname>After=</varname> on |
| another unit, the former is stopped |
| before the latter if both are shut |
| down. If one unit with an ordering |
| dependency on another unit is shut |
| down while the latter is started up, |
| the shut down is ordered before the |
| start-up regardless whether the |
| ordering dependency is actually of |
| type <varname>After=</varname> or |
| <varname>Before=</varname>. If two |
| units have no ordering dependencies |
| between them they are shut down |
| or started up simultaneously, and |
| no ordering takes |
| place. </para></listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>OnFailure=</varname></term> |
| |
| <listitem><para>Lists one or more |
| units that are activated when this |
| unit enters the |
| '<literal>failed</literal>' |
| state.</para></listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>PropagatesReloadTo=</varname></term> |
| <term><varname>ReloadPropagatedFrom=</varname></term> |
| |
| <listitem><para>Lists one or more |
| units where reload requests on the |
| unit will be propagated to/on the |
| other unit will be propagated |
| from. Issuing a reload request on a |
| unit will automatically also enqueue a |
| reload request on all units that the |
| reload request shall be propagated to |
| via these two |
| settings.</para></listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>RequiresMountsFor=</varname></term> |
| |
| <listitem><para>Takes a space |
| separated list of absolute paths. Automatically |
| adds dependencies of type |
| <varname>Requires=</varname> and |
| <varname>After=</varname> for all |
| mount units required to access the |
| specified path.</para></listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>OnFailureIsolate=</varname></term> |
| |
| <listitem><para>Takes a boolean |
| argument. If <option>true</option> the |
| unit listed in |
| <varname>OnFailure=</varname> will be |
| enqueued in isolation mode, i.e. all |
| units that are not its dependency will |
| be stopped. If this is set only a |
| single unit may be listed in |
| <varname>OnFailure=</varname>. Defaults |
| to |
| <option>false</option>.</para></listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>IgnoreOnIsolate=</varname></term> |
| |
| <listitem><para>Takes a boolean |
| argument. If <option>true</option> |
| this unit will not be stopped when |
| isolating another unit. Defaults to |
| <option>false</option>.</para></listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>IgnoreOnSnapshot=</varname></term> |
| |
| <listitem><para>Takes a boolean |
| argument. If <option>true</option> |
| this unit will not be included in |
| snapshots. Defaults to |
| <option>true</option> for device and |
| snapshot units, <option>false</option> |
| for the others.</para></listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>StopWhenUnneeded=</varname></term> |
| |
| <listitem><para>Takes a boolean |
| argument. If <option>true</option> |
| this unit will be stopped when it is |
| no longer used. Note that in order to |
| minimize the work to be executed, |
| systemd will not stop units by default |
| unless they are conflicting with other |
| units, or the user explicitly |
| requested their shut down. If this |
| option is set, a unit will be |
| automatically cleaned up if no other |
| active unit requires it. Defaults to |
| <option>false</option>.</para></listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>RefuseManualStart=</varname></term> |
| <term><varname>RefuseManualStop=</varname></term> |
| |
| <listitem><para>Takes a boolean |
| argument. If <option>true</option> |
| this unit can only be activated |
| or deactivated indirectly. In |
| this case explicit start-up |
| or termination requested by the |
| user is denied, however if it is |
| started or stopped as a |
| dependency of another unit, start-up |
| or termination will succeed. This |
| is mostly a safety feature to ensure |
| that the user does not accidentally |
| activate units that are not intended |
| to be activated explicitly, and not |
| accidentally deactivate units that are |
| not intended to be deactivated. |
| These options default to |
| <option>false</option>.</para></listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>AllowIsolate=</varname></term> |
| |
| <listitem><para>Takes a boolean |
| argument. If <option>true</option> |
| this unit may be used with the |
| <command>systemctl isolate</command> |
| command. Otherwise this will be |
| refused. It probably is a good idea to |
| leave this disabled except for target |
| units that shall be used similar to |
| runlevels in SysV init systems, just |
| as a precaution to avoid unusable |
| system states. This option defaults to |
| <option>false</option>.</para></listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>DefaultDependencies=</varname></term> |
| |
| <listitem><para>Takes a boolean |
| argument. If <option>true</option> |
| (the default), a few default |
| dependencies will implicitly be |
| created for the unit. The actual |
| dependencies created depend on the |
| unit type. For example, for service |
| units, these dependencies ensure that |
| the service is started only after |
| basic system initialization is |
| completed and is properly terminated on |
| system shutdown. See the respective |
| man pages for details. Generally, only |
| services involved with early boot or |
| late shutdown should set this option |
| to <option>false</option>. It is |
| highly recommended to leave this |
| option enabled for the majority of |
| common units. If set to |
| <option>false</option> this option |
| does not disable all implicit |
| dependencies, just non-essential |
| ones.</para></listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>JobTimeoutSec=</varname></term> |
| |
| <listitem><para>When clients are |
| waiting for a job of this unit to |
| complete, time out after the specified |
| time. If this time limit is reached |
| the job will be cancelled, the unit |
| however will not change state or even |
| enter the '<literal>failed</literal>' |
| mode. This value defaults to 0 (job |
| timeouts disabled), except for device |
| units. NB: this timeout is independent |
| from any unit-specific timeout (for |
| example, the timeout set with |
| <varname>Timeout=</varname> in service |
| units) as the job timeout has no |
| effect on the unit itself, only on the |
| job that might be pending for it. Or |
| in other words: unit-specific timeouts |
| are useful to abort unit state |
| changes, and revert them. The job |
| timeout set with this option however |
| is useful to abort only the job |
| waiting for the unit state to |
| change.</para></listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>ConditionPathExists=</varname></term> |
| <term><varname>ConditionPathExistsGlob=</varname></term> |
| <term><varname>ConditionPathIsDirectory=</varname></term> |
| <term><varname>ConditionPathIsSymbolicLink=</varname></term> |
| <term><varname>ConditionPathIsMountPoint=</varname></term> |
| <term><varname>ConditionPathIsReadWrite=</varname></term> |
| <term><varname>ConditionDirectoryNotEmpty=</varname></term> |
| <term><varname>ConditionFileNotEmpty=</varname></term> |
| <term><varname>ConditionFileIsExecutable=</varname></term> |
| <term><varname>ConditionKernelCommandLine=</varname></term> |
| <term><varname>ConditionVirtualization=</varname></term> |
| <term><varname>ConditionSecurity=</varname></term> |
| <term><varname>ConditionCapability=</varname></term> |
| <term><varname>ConditionHost=</varname></term> |
| <term><varname>ConditionACPower=</varname></term> |
| <term><varname>ConditionNull=</varname></term> |
| |
| <listitem><para>Before starting a unit |
| verify that the specified condition is |
| true. If it is not true the starting |
| of the unit will be skipped, however |
| all ordering dependencies of it are |
| still respected. A failing condition |
| will not result in the unit being |
| moved into a failure state. The |
| condition is checked at the time the |
| queued start job is to be |
| executed.</para> |
| |
| <para>With |
| <varname>ConditionPathExists=</varname> |
| a file existence condition is |
| checked before a unit is started. If |
| the specified absolute path name does |
| not exist the condition will |
| fail. If the absolute path name passed |
| to |
| <varname>ConditionPathExists=</varname> |
| is prefixed with an exclamation mark |
| ('!'), the test is negated, and the unit |
| is only started if the path does not |
| exist.</para> |
| |
| <para><varname>ConditionPathExistsGlob=</varname> |
| is similar to |
| <varname>ConditionPathExists=</varname>, |
| but checks for the existence of at |
| least one file or directory matching |
| the specified globbing pattern.</para> |
| |
| <para><varname>ConditionPathIsDirectory=</varname> |
| is similar to |
| <varname>ConditionPathExists=</varname> |
| but verifies whether a certain path |
| exists and is a |
| directory.</para> |
| |
| <para><varname>ConditionPathIsSymbolicLink=</varname> |
| is similar to |
| <varname>ConditionPathExists=</varname> |
| but verifies whether a certain path |
| exists and is a symbolic |
| link.</para> |
| |
| <para><varname>ConditionPathIsMountPoint=</varname> |
| is similar to |
| <varname>ConditionPathExists=</varname> |
| but verifies whether a certain path |
| exists and is a mount |
| point.</para> |
| |
| <para><varname>ConditionPathIsReadWrite=</varname> |
| is similar to |
| <varname>ConditionPathExists=</varname> |
| but verifies whether the underlying |
| file system is readable and writable |
| (i.e. not mounted |
| read-only).</para> |
| |
| <para><varname>ConditionDirectoryNotEmpty=</varname> |
| is similar to |
| <varname>ConditionPathExists=</varname> |
| but verifies whether a certain path |
| exists and is a non-empty |
| directory.</para> |
| |
| <para><varname>ConditionFileNotEmpty=</varname> |
| is similar to |
| <varname>ConditionPathExists=</varname> |
| but verifies whether a certain path |
| exists and refers to a regular file |
| with a non-zero size.</para> |
| |
| <para><varname>ConditionFileIsExecutable=</varname> |
| is similar to |
| <varname>ConditionPathExists=</varname> |
| but verifies whether a certain path |
| exists, is a regular file and marked |
| executable.</para> |
| |
| <para>Similar, |
| <varname>ConditionKernelCommandLine=</varname> |
| may be used to check whether a |
| specific kernel command line option is |
| set (or if prefixed with the |
| exclamation mark unset). The argument |
| must either be a single word, or an |
| assignment (i.e. two words, separated |
| '='). In the former |
| case the kernel command line is |
| searched for the word appearing as is, |
| or as left hand side of an |
| assignment. In the latter case the |
| exact assignment is looked for with |
| right and left hand side |
| matching.</para> |
| |
| <para><varname>ConditionVirtualization=</varname> |
| may be used to check whether the |
| system is executed in a virtualized |
| environment and optionally test |
| whether it is a specific |
| implementation. Takes either boolean |
| value to check if being executed in |
| any virtualized environment, or one of |
| <varname>vm</varname> and |
| <varname>container</varname> to test |
| against a generic type of |
| virtualization solution, or one of |
| <varname>qemu</varname>, |
| <varname>kvm</varname>, |
| <varname>vmware</varname>, |
| <varname>microsoft</varname>, |
| <varname>oracle</varname>, |
| <varname>xen</varname>, |
| <varname>bochs</varname>, |
| <varname>chroot</varname>, |
| <varname>openvz</varname>, |
| <varname>lxc</varname>, |
| <varname>lxc-libvirt</varname>, |
| <varname>systemd-nspawn</varname> to |
| test against a specific |
| implementation. If multiple |
| virtualization technologies are nested |
| only the innermost is considered. The |
| test may be negated by prepending an |
| exclamation mark.</para> |
| |
| <para><varname>ConditionSecurity=</varname> |
| may be used to check whether the given |
| security module is enabled on the |
| system. Currently the only recognized |
| value is <varname>selinux</varname>. |
| The test may be negated by prepending |
| an exclamation |
| mark.</para> |
| |
| <para><varname>ConditionCapability=</varname> |
| may be used to check whether the given |
| capability exists in the capability |
| bounding set of the service manager |
| (i.e. this does not check whether |
| capability is actually available in |
| the permitted or effective sets, see |
| <citerefentry><refentrytitle>capabilities</refentrytitle><manvolnum>7</manvolnum></citerefentry> |
| for details). Pass a capability name |
| such as <literal>CAP_MKNOD</literal>, |
| possibly prefixed with an exclamation |
| mark to negate the check.</para> |
| |
| <para><varname>ConditionHost=</varname> |
| may be used to match against the |
| host name or machine ID of the |
| host. This either takes a host name |
| string (optionally with shell style |
| globs) which is tested against the |
| locally set host name as returned by |
| <citerefentry><refentrytitle>gethostname</refentrytitle><manvolnum>2</manvolnum></citerefentry>, |
| or a machine ID formatted as string |
| (see |
| <citerefentry><refentrytitle>machine-id</refentrytitle><manvolnum>5</manvolnum></citerefentry>). |
| The test may be negated by prepending |
| an exclamation mark.</para> |
| |
| <para><varname>ConditionACPower=</varname> |
| may be used to check whether the |
| system has AC power, or is exclusively |
| battery powered at the time of |
| activation of the unit. This takes a |
| boolean argument. If set to |
| <varname>true</varname> the condition |
| will hold only if at least one AC |
| connector of the system is connected |
| to a power source, or if no AC |
| connectors are known. Conversely, if |
| set to <varname>false</varname> the |
| condition will hold only if there is |
| at least one AC connector known and |
| all AC connectors are disconnected |
| from a power source.</para> |
| |
| <para>Finally, |
| <varname>ConditionNull=</varname> may |
| be used to add a constant condition |
| check value to the unit. It takes a |
| boolean argument. If set to |
| <varname>false</varname> the condition |
| will always fail, otherwise |
| succeed.</para> |
| |
| <para>If multiple conditions are |
| specified the unit will be executed if |
| all of them apply (i.e. a logical AND |
| is applied). Condition checks can be |
| prefixed with a pipe symbol (|) in |
| which case a condition becomes a |
| triggering condition. If at least one |
| triggering condition is defined for a |
| unit then the unit will be executed if |
| at least one of the triggering |
| conditions apply and all of the |
| non-triggering conditions. If you |
| prefix an argument with the pipe |
| symbol and an exclamation mark the |
| pipe symbol must be passed first, the |
| exclamation second. Except for |
| <varname>ConditionPathIsSymbolicLink=</varname>, |
| all path checks follow symlinks. If |
| any of these options is assigned the |
| empty string the list of conditions is |
| reset completely, all previous |
| condition settings (of any kind) will |
| have no effect.</para></listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>SourcePath=</varname></term> |
| <listitem><para>A path to a |
| configuration file this unit has been |
| generated from. This is primarily |
| useful for implementation of generator |
| tools that convert configuration from |
| an external configuration file format |
| into native unit files. Thus |
| functionality should not be used in |
| normal units.</para></listitem> |
| </varlistentry> |
| </variablelist> |
| |
| <para>Unit file may include a [Install] section, which |
| carries installation information for the unit. This |
| section is not interpreted by |
| <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry> |
| during runtime. It is used exclusively by the |
| <command>enable</command> and |
| <command>disable</command> commands of the |
| <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry> |
| tool during installation of a unit:</para> |
| |
| <variablelist class='unit-directives'> |
| <varlistentry> |
| <term><varname>Alias=</varname></term> |
| |
| <listitem><para>Additional names this |
| unit shall be installed under. The |
| names listed here must have the same |
| suffix (i.e. type) as the unit file |
| name. This option may be specified |
| more than once, in which case all |
| listed names are used. At installation |
| time, |
| <command>systemctl enable</command> |
| will create symlinks from these names |
| to the unit file name.</para></listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>WantedBy=</varname></term> |
| <term><varname>RequiredBy=</varname></term> |
| |
| <listitem><para>Installs a symlink in |
| the <filename>.wants/</filename> |
| or <filename>.requires/</filename> |
| subdirectory for a unit, respectively. This has the |
| effect that when the listed unit name |
| is activated the unit listing it is |
| activated |
| too. <command>WantedBy=foo.service</command> |
| in a service |
| <filename>bar.service</filename> is |
| mostly equivalent to |
| <command>Alias=foo.service.wants/bar.service</command> |
| in the same file.</para></listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>Also=</varname></term> |
| |
| <listitem><para>Additional units to |
| install when this unit is |
| installed. If the user requests |
| installation of a unit with this |
| option configured, |
| <command>systemctl enable</command> |
| will automatically install units |
| listed in this option as |
| well.</para></listitem> |
| </varlistentry> |
| </variablelist> |
| |
| <para>The following specifiers are interpreted in the |
| Install section: %n, %N, %p, %i, %U, %u, %m, %H, %b. |
| For their meaning see the next section. |
| </para> |
| </refsect1> |
| |
| <refsect1> |
| <title>Specifiers</title> |
| |
| <para>Many settings resolve specifiers which may be |
| used to write generic unit files referring to runtime |
| or unit parameters that are replaced when the unit |
| files are loaded. The following specifiers are |
| understood:</para> |
| |
| <table> |
| <title>Specifiers available in unit files</title> |
| <tgroup cols='3' align='left' colsep='1' rowsep='1'> |
| <colspec colname="spec" /> |
| <colspec colname="mean" /> |
| <colspec colname="detail" /> |
| <thead> |
| <row> |
| <entry>Specifier</entry> |
| <entry>Meaning</entry> |
| <entry>Details</entry> |
| </row> |
| </thead> |
| <tbody> |
| <row> |
| <entry><literal>%n</literal></entry> |
| <entry>Full unit name</entry> |
| <entry></entry> |
| </row> |
| <row> |
| <entry><literal>%N</literal></entry> |
| <entry>Unescaped full unit name</entry> |
| <entry></entry> |
| </row> |
| <row> |
| <entry><literal>%p</literal></entry> |
| <entry>Prefix name</entry> |
| <entry>For instantiated units this refers to the string before the @. For non-instantiated units this refers to to the name of the unit with the type suffix removed.</entry> |
| </row> |
| <row> |
| <entry><literal>%P</literal></entry> |
| <entry>Unescaped prefix name</entry> |
| <entry></entry> |
| </row> |
| <row> |
| <entry><literal>%i</literal></entry> |
| <entry>Instance name</entry> |
| <entry>For instantiated units: this is the string between the @ character and the suffix.</entry> |
| </row> |
| <row> |
| <entry><literal>%I</literal></entry> |
| <entry>Unescaped instance name</entry> |
| <entry></entry> |
| </row> |
| <row> |
| <entry><literal>%f</literal></entry> |
| <entry>Unescaped file name</entry> |
| <entry>This is either the unescaped instance name (if applicable) with / prepended (if applicable), or the prefix name similarly prepended with /.</entry> |
| </row> |
| <row> |
| <entry><literal>%c</literal></entry> |
| <entry>Control group path of the unit</entry> |
| <entry></entry> |
| </row> |
| <row> |
| <entry><literal>%r</literal></entry> |
| <entry>Root control group path of systemd</entry> |
| <entry></entry> |
| </row> |
| <row> |
| <entry><literal>%R</literal></entry> |
| <entry>Parent directory of the root control group path of systemd</entry> |
| <entry></entry> |
| </row> |
| <row> |
| <entry><literal>%t</literal></entry> |
| <entry>Runtime socket dir</entry> |
| <entry>This is either <filename>/run</filename> (for the system manager) or <literal>$XDG_RUNTIME_DIR</literal> (for user managers).</entry> |
| </row> |
| <row> |
| <entry><literal>%u</literal></entry> |
| <entry>User name</entry> |
| <entry>This is the name of the configured user of the unit, or (if none is set) the user running the systemd instance.</entry> |
| </row> |
| <row> |
| <entry><literal>%U</literal></entry> |
| <entry>User UID</entry> |
| <entry>This is the UID of the configured user of the unit, or (if none is set) the user running the systemd instance.</entry> |
| </row> |
| <row> |
| <entry><literal>%h</literal></entry> |
| <entry>User home directory</entry> |
| <entry>This is the home directory of the configured user of the unit, or (if none is set) the user running the systemd instance.</entry> |
| </row> |
| <row> |
| <entry><literal>%s</literal></entry> |
| <entry>User shell</entry> |
| <entry>This is the shell of the configured |
| user of the unit, or (if none is set) the user |
| running the systemd instance. If the user is |
| <literal>root</literal> (UID equal to 0), the |
| shell configured in account database is |
| ignored and <filename>/bin/sh</filename> is |
| always used. |
| </entry> |
| </row> |
| <row> |
| <entry><literal>%m</literal></entry> |
| <entry>Machine ID</entry> |
| <entry>The machine ID of the running system, formatted as string. See <citerefentry><refentrytitle>machine-id</refentrytitle><manvolnum>5</manvolnum></citerefentry> for more information.</entry> |
| </row> |
| <row> |
| <entry><literal>%b</literal></entry> |
| <entry>Boot ID</entry> |
| <entry>The boot ID of the running system, formatted as string. See <citerefentry><refentrytitle>random</refentrytitle><manvolnum>4</manvolnum></citerefentry> for more information.</entry> |
| </row> |
| <row> |
| <entry><literal>%H</literal></entry> |
| <entry>Host name</entry> |
| <entry>The host name of the running system.</entry> |
| </row> |
| <row> |
| <entry><literal>%%</literal></entry> |
| <entry>Escaped %</entry> |
| <entry>Single percent sign.</entry> |
| </row> |
| </tbody> |
| </tgroup> |
| </table> |
| </refsect1> |
| |
| <refsect1> |
| <title>See Also</title> |
| <para> |
| <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, |
| <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>8</manvolnum></citerefentry>, |
| <citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry>, |
| <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>, |
| <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>, |
| <citerefentry><refentrytitle>systemd.device</refentrytitle><manvolnum>5</manvolnum></citerefentry>, |
| <citerefentry><refentrytitle>systemd.mount</refentrytitle><manvolnum>5</manvolnum></citerefentry>, |
| <citerefentry><refentrytitle>systemd.automount</refentrytitle><manvolnum>5</manvolnum></citerefentry>, |
| <citerefentry><refentrytitle>systemd.swap</refentrytitle><manvolnum>5</manvolnum></citerefentry>, |
| <citerefentry><refentrytitle>systemd.target</refentrytitle><manvolnum>5</manvolnum></citerefentry>, |
| <citerefentry><refentrytitle>systemd.path</refentrytitle><manvolnum>5</manvolnum></citerefentry>, |
| <citerefentry><refentrytitle>systemd.timer</refentrytitle><manvolnum>5</manvolnum></citerefentry>, |
| <citerefentry><refentrytitle>systemd.snapshot</refentrytitle><manvolnum>5</manvolnum></citerefentry>, |
| <citerefentry><refentrytitle>systemd.time</refentrytitle><manvolnum>7</manvolnum></citerefentry>, |
| <citerefentry><refentrytitle>capabilities</refentrytitle><manvolnum>7</manvolnum></citerefentry>, |
| <citerefentry><refentrytitle>systemd.directives</refentrytitle><manvolnum>7</manvolnum></citerefentry> |
| </para> |
| </refsect1> |
| |
| </refentry> |