| systemd System and Service Manager |
| |
| CHANGES WITH 189: |
| |
| * Support for reading structured kernel messages from |
| /dev/kmsg has now been added and is enabled by default. |
| |
| * Support for reading kernel messages from /proc/kmsg has now |
| been removed. If you want kernel messages in the journal |
| make sure to run a recent kernel (>= 3.5) that supports |
| reading structured messages from /dev/kmsg (see |
| above). /proc/kmsg is now exclusive property of classic |
| syslog daemons again. |
| |
| * The libudev API gained the new |
| udev_device_new_from_device_id() call. |
| |
| * The logic for file system namespace (ReadOnlyDirectory=, |
| ReadWriteDirectoy=, PrivateTmp=) has been reworked not to |
| require pivot_root() anymore. This means fewer temporary |
| directories are created below /tmp for this feature. |
| |
| * nspawn containers will now see and receive all submounts |
| made on the host OS below the root file system of the |
| container. |
| |
| * Forward Secure Sealing is now supported for Journal files, |
| which provide cryptographical sealing of journal files so |
| that attackers cannot alter log history anymore without this |
| being detectable. Lennart will soon post a blog story about |
| this explaining it in more detail. |
| |
| * There are two new service settings RestartPreventExitStatus= |
| and SuccessExitStatus= which allow configuration of exit |
| status (exit code or signal) which will be excepted from the |
| restart logic, resp. consider successful. |
| |
| * journalctl gained the new --verify switch that can be used |
| to check the integrity of the structure of journal files and |
| (if Forward Secure Sealing is enabled) the contents of |
| journal files. |
| |
| * nspawn containers will now be run with /dev/stdin, /dev/fd/ |
| and similar symlinks pre-created. This makes running shells |
| as container init process a lot more fun. |
| |
| * The fstab support can now handle PARTUUID= and PARTLABEL= |
| entries. |
| |
| * A new ConditionHost= condition has been added to match |
| against the hostname (with globs) and machine ID. This is |
| useful for clusters where a single OS image is used to |
| provision a large number of hosts which shall run slightly |
| different sets of services. |
| |
| * Services which hit the restart limit will now be placed in a |
| failure state. |
| |
| Contributions from Bertram Poettering, Dave Reisner, Huang |
| Hang, Kay Sievers, Lennart Poettering, Lukas Nykryn, Martin |
| Pitt, Simon Peeters, Zbigniew Jędrzejewski-Szmek |
| |
| CHANGES WITH 188: |
| |
| * When running in --user mode systemd will now become a |
| subreaper (PR_SET_CHILD_SUBREAPER). This should make the ps |
| tree a lot more organized. |
| |
| * A new PartOf= unit dependency type has been introduced that |
| may be used to group services in a natural way. |
| |
| * "systemctl enable" may now be used to enable instances of |
| services. |
| |
| * journalctl now prints error log levels in red, and |
| warning/notice log levels in bright white. It also supports |
| filtering by log level now. |
| |
| * cgtop gained a new -n switch (similar to top), to configure |
| the maximum number of iterations to run for. It also gained |
| -b, to run in batch mode (accepting no input). |
| |
| * The suffix ".service" may now be ommited on most systemctl |
| command lines involving service unit names. |
| |
| * There's a new bus call in logind to lock all sessions, as |
| well as a loginctl verb for it "lock-sessions". |
| |
| * libsystemd-logind.so gained a new call sd_journal_perror() |
| that works similar to libc perror() but logs to the journal |
| and encodes structured information about the error number. |
| |
| * /etc/crypttab entries now understand the new keyfile-size= |
| option. |
| |
| * shutdown(8) now can send a (configurable) wall message when |
| a shutdown is cancelled. |
| |
| * The mount propagation mode for the root file system will now |
| default to "shared", which is useful to make containers work |
| nicely out-of-the-box so that they receive new mounts from |
| the host. This can be undone locally by running "mount |
| --make-rprivate /" if needed. |
| |
| * The prefdm.service file has been removed. Distributions |
| should maintain this unit downstream if they intend to keep |
| it around. However, we recommend writing normal unit files |
| for display managers instead. |
| |
| * Since systemd is a crucial part of the OS we will now |
| default to a number of compiler switches that improve |
| security (hardening) such as read-only relocations, stack |
| protection, and suchlike. |
| |
| * The TimeoutSec= setting for services is now split into |
| TimeoutStartSec= and TimeoutStopSec= to allow configuration |
| of individual time outs for the start and the stop phase of |
| the service. |
| |
| Contributions from: Artur Zaprzala, Arvydas Sidorenko, Auke |
| Kok, Bryan Kadzban, Dave Reisner, David Strauss, Harald Hoyer, |
| Jim Meyering, Kay Sievers, Lennart Poettering, Mantas |
| Mikulėnas, Martin Pitt, Michal Schmidt, Michal Sekletar, Peter |
| Alfredsen, Shawn Landden, Simon Peeters, Terence Honles, Tom |
| Gundersen, Zbigniew Jędrzejewski-Szmek |
| |
| CHANGES WITH 187: |
| |
| * The journal and id128 C APIs are now fully documented as man |
| pages. |
| |
| * Extra safety checks have been added when transitioning from |
| the initial RAM disk to the main system to avoid accidental |
| data loss. |
| |
| * /etc/crypttab entries now understand the new keyfile-offset= |
| option. |
| |
| * systemctl -t can now be used to filter by unit load state. |
| |
| * The journal C API gained the new sd_journal_wait() call to |
| make writing synchronous journal clients easier. |
| |
| * journalctl gained the new -D switch to show journals from a |
| specific directory. |
| |
| * journalctl now displays a special marker between log |
| messages of two different boots. |
| |
| * The journal is now explicitly flushed to /var via a service |
| systemd-journal-flush.service, rather than implicitly simply |
| by seeing /var/log/journal to be writable. |
| |
| * journalctl (and the journal C APIs) can now match for much |
| more complex expressions, with alternatives and |
| disjunctions. |
| |
| * When transitioning from the initial RAM disk to the main |
| system we will now kill all processes in a killing spree to |
| ensure no processes stay around by accident. |
| |
| * Three new specifiers may be used in unit files: %u, %h, %s |
| resolve to the user name, user home directory resp. user |
| shell. This is useful for running systemd user instances. |
| |
| * We now automatically rotate journal files if their data |
| object hash table gets a fill level > 75%. We also size the |
| hash table based on the configured maximum file size. This |
| together should lower hash collisions drastically and thus |
| speed things up a bit. |
| |
| * journalctl gained the new "--header" switch to introspect |
| header data of journal files. |
| |
| * A new setting SystemCallFilters= has been added to services |
| which may be used to apply blacklists or whitelists to |
| system calls. This is based on SECCOMP Mode 2 of Linux 3.5. |
| |
| * nspawn gained a new --link-journal= switch (and quicker: -j) |
| to link the container journal with the host. This makes it |
| very easy to centralize log viewing on the host for all |
| guests while still keeping the journal files separated. |
| |
| * Many bugfixes and optimizations |
| |
| Contributions from: Auke Kok, Eelco Dolstra, Harald Hoyer, Kay |
| Sievers, Lennart Poettering, Malte Starostik, Paul Menzel, Rex |
| Tsai, Shawn Landden, Tom Gundersen, Ville Skyttä, Zbigniew |
| Jędrzejewski-Szmek |
| |
| CHANGES WITH 186: |
| |
| * Several tools now understand kernel command line arguments, |
| which are only read when run in an initial RAM disk. They |
| usually follow closely their normal counterparts, but are |
| prefixed with rd. |
| |
| * There's a new tool to analyze the readahead files that are |
| automatically generated at boot. Use: |
| |
| /usr/lib/systemd/systemd-readahead analyze /.readahead |
| |
| * We now provide an early debug shell on tty9 if this enabled. Use: |
| |
| systemctl enable debug-shell.service |
| |
| * All plymouth related units have been moved into the Plymouth |
| package. Please make sure to upgrade your Plymouth version |
| as well. |
| |
| * systemd-tmpfiles now supports getting passed the basename of |
| a configuration file only, in which case it will look for it |
| in all appropriate directories automatically. |
| |
| * udevadm info now takes a /dev or /sys path as argument, and |
| does the right thing. Example: |
| |
| udevadm info /dev/sda |
| udevadm info /sys/class/block/sda |
| |
| * systemctl now prints a warning if a unit is stopped but a |
| unit that might trigger it continues to run. Example: a |
| service is stopped but the socket that activates it is left |
| running. |
| |
| * "systemctl status" will now mention if the log output was |
| shortened due to rotation since a service has been started. |
| |
| * The journal API now exposes functions to determine the |
| "cutoff" times due to rotation. |
| |
| * journald now understands SIGUSR1 and SIGUSR2 for triggering |
| immediately flushing of runtime logs to /var if possible, |
| resp. for triggering immediate rotation of the journal |
| files. |
| |
| * It is now considered an error if a service is attempted to |
| be stopped that is not loaded. |
| |
| * XDG_RUNTIME_DIR now uses numeric UIDs instead of usernames. |
| |
| * systemd-analyze now supports Python 3 |
| |
| * tmpfiles now supports cleaning up directories via aging |
| where the first level dirs are always kept around but |
| directories beneath it automatically aged. This is enabled |
| by prefixing the age field with '~'. |
| |
| * Seat objects now expose CanGraphical, CanTTY properties |
| which is required to deal with very fast bootups where the |
| display manager might be running before the graphics drivers |
| completed initialization. |
| |
| * Seat objects now expose a State property. |
| |
| * We now include RPM macros for service enabling/disabling |
| based on the preset logic. We recommend RPM based |
| distributions to make use of these macros if possible. This |
| makes it simpler to reuse RPM spec files across |
| distributions. |
| |
| * We now make sure that the collected systemd unit name is |
| always valid when services log to the journal via |
| STDOUT/STDERR. |
| |
| * There's a new man page kernel-command-line(7) detailing all |
| command line options we understand. |
| |
| * The fstab generator may now be disabled at boot by passing |
| fstab=0 on the kernel command line. |
| |
| * A new kernel command line option modules-load= is now understood |
| to load a specific kernel module statically, early at boot. |
| |
| * Unit names specified on the systemctl command line are now |
| automatically escaped as needed. Also, if file system or |
| device paths are specified they are automatically turned |
| into the appropriate mount or device unit names. Example: |
| |
| systemctl status /home |
| systemctl status /dev/sda |
| |
| * The SysVConsole= configuration option has been removed from |
| system.conf parsing. |
| |
| * The SysV search path is no longer exported on the D-Bus |
| Manager object. |
| |
| * The Names= option is been removed from unit file parsing. |
| |
| * There's a new man page bootup(7) detailing the boot process. |
| |
| * Every unit and every generator we ship with systemd now |
| comes with full documentation. The self-explanatory boot is |
| complete. |
| |
| * A couple of services gained "systemd-" prefixes in their |
| name if they wrap systemd code, rather than only external |
| code. Among them fsck@.service which is now |
| systemd-fsck@.service. |
| |
| * The HaveWatchdog property has been removed from the D-Bus |
| Manager object. |
| |
| * systemd.confirm_spawn= on the kernel command line should now |
| work sensibly. |
| |
| * There's a new man page crypttab(5) which details all options |
| we actually understand. |
| |
| * systemd-nspawn gained a new --capability= switch to pass |
| additional capabilities to the container. |
| |
| * timedated will now read known NTP implementation unit names |
| from /usr/lib/systemd/ntp-units.d/*.list, |
| systemd-timedated-ntp.target has been removed. |
| |
| * journalctl gained a new switch "-b" that lists log data of |
| the current boot only. |
| |
| * The notify socket is in the abstract namespace again, in |
| order to support daemons which chroot() at start-up. |
| |
| * There is a new Storage= configuration option for journald |
| which allows configuration of where log data should go. This |
| also provides a way to disable journal logging entirely, so |
| that data collected is only forwarded to the console, the |
| kernel log buffer or another syslog implementation. |
| |
| * Many bugfixes and optimizations |
| |
| Contributions from: Auke Kok, Colin Guthrie, Dave Reisner, |
| David Strauss, Eelco Dolstra, Kay Sievers, Lennart Poettering, |
| Lukas Nykryn, Michal Schmidt, Michal Sekletar, Paul Menzel, |
| Shawn Landden, Tom Gundersen |
| |
| CHANGES WITH 185: |
| * "systemctl help <unit>" now shows the man page if one is |
| available. |
| |
| * Several new man pages have been added. |
| |
| * MaxLevelStore=, MaxLevelSyslog=, MaxLevelKMsg=, |
| MaxLevelConsole= can now be specified in |
| journald.conf. These options allow reducing the amount of |
| data stored on disk or forwarded by the log level. |
| |
| * TimerSlackNSec= can now be specified in system.conf for |
| PID1. This allows system-wide power savings. |
| |
| Contributions from: Dave Reisner, Kay Sievers, Lauri Kasanen, |
| Lennart Poettering, Malte Starostik, Marc-Antoine Perennou, |
| Matthias Clasen |
| |
| CHANGES WITH 184: |
| * logind is now capable of (optionally) handling power and |
| sleep keys as well as the lid switch. |
| |
| * journalctl now understands the syntax "journalctl |
| /usr/bin/avahi-daemon" to get all log output of a specific |
| daemon. |
| |
| * CapabilityBoundingSet= in system.conf now also influences |
| the capability bound set of usermode helpers of the kernel. |
| |
| Contributions from: Daniel Drake, Daniel J. Walsh, Gert |
| Michael Kulyk, Harald Hoyer, Jean Delvare, Kay Sievers, |
| Lennart Poettering, Matthew Garrett, Matthias Clasen, Paul |
| Menzel, Shawn Landden, Tero Roponen, Tom Gundersen |
| |
| CHANGES WITH 183: |
| * Note that we skipped 139 releases here in order to set the |
| new version to something that is greater than both udev's |
| and systemd's most recent version number. |
| |
| * udev: all udev sources are merged into the systemd source tree now. |
| All future udev development will happen in the systemd tree. It |
| is still fully supported to use the udev daemon and tools without |
| systemd running, like in initramfs or other init systems. Building |
| udev though, will require the *build* of the systemd tree, but |
| udev can be properly *run* without systemd. |
| |
| * udev: /lib/udev/devices/ are not read anymore; systemd-tmpfiles |
| should be used to create dead device nodes as workarounds for broken |
| subsystems. |
| |
| * udev: RUN+="socket:..." and udev_monitor_new_from_socket() is |
| no longer supported. udev_monitor_new_from_netlink() needs to be |
| used to subscribe to events. |
| |
| * udev: when udevd is started by systemd, processes which are left |
| behind by forking them off of udev rules, are unconditionally cleaned |
| up and killed now after the event handling has finished. Services or |
| daemons must be started as systemd services. Services can be |
| pulled-in by udev to get started, but they can no longer be directly |
| forked by udev rules. |
| |
| * udev: the daemon binary is called systemd-udevd now and installed |
| in /usr/lib/systemd/. Standalone builds or non-systemd systems need |
| to adapt to that, create symlink, or rename the binary after building |
| it. |
| |
| * libudev no longer provides these symbols: |
| udev_monitor_from_socket() |
| udev_queue_get_failed_list_entry() |
| udev_get_{dev,sys,run}_path() |
| The versions number was bumped and symbol versioning introduced. |
| |
| * systemd-loginctl and systemd-journalctl have been renamed |
| to loginctl and journalctl to match systemctl. |
| |
| * The config files: /etc/systemd/systemd-logind.conf and |
| /etc/systemd/systemd-journald.conf have been renamed to |
| logind.conf and journald.conf. Package updates should rename |
| the files to the new names on upgrade. |
| |
| * For almost all files the license is now LGPL2.1+, changed |
| from the previous GPL2.0+. Exceptions are some minor stuff |
| of udev (which will be changed to LGPL2.1 eventually, too), |
| and the MIT licensed sd-daemon.[ch] library that is suitable |
| to be used as drop-in files. |
| |
| * systemd and logind now handle system sleep states, in |
| particular suspending and hibernating. |
| |
| * logind now implements a sleep/shutdown/idle inhibiting logic |
| suitable for a variety of uses. Soonishly Lennart will blog |
| about this in more detail. |
| |
| * var-run.mount and var-lock.mount are no longer provided |
| (which prevously bind mounted these directories to their new |
| places). Distributions which have not converted these |
| directories to symlinks should consider stealing these files |
| from git history and add them downstream. |
| |
| * We introduced the Documentation= field for units and added |
| this to all our shipped units. This is useful to make it |
| easier to explore the boot and the purpose of the various |
| units. |
| |
| * All smaller setup units (such as |
| systemd-vconsole-setup.service) now detect properly if they |
| are run in a container and are skipped when |
| appropriate. This guarantees an entirely noise-free boot in |
| Linux container environments such as systemd-nspawn. |
| |
| * A framework for implementing offline system updates is now |
| integrated, for details see: |
| http://freedesktop.org/wiki/Software/systemd/SystemUpdates |
| |
| * A new service type Type=idle is available now which helps us |
| avoiding ugly interleaving of getty output and boot status |
| messages. |
| |
| * There's now a system-wide CapabilityBoundingSet= option to |
| globally reduce the set of capabilities for the |
| system. This is useful to drop CAP_SYS_MKNOD, CAP_SYS_RAWIO, |
| CAP_NET_RAW, CAP_SYS_MODULE, CAP_SYS_TIME, CAP_SYS_PTRACE or |
| even CAP_NET_ADMIN system-wide for secure systems. |
| |
| * There are now system-wide DefaultLimitXXX= options to |
| globally change the defaults of the various resource limits |
| for all units started by PID 1. |
| |
| * Harald Hoyer's systemd test suite has been integrated into |
| systemd which allows easy testing of systemd builds in qemu |
| and nspawn. (This is really awesome! Ask us for details!) |
| |
| * The fstab parser is now implemented as generator, not inside |
| of PID 1 anymore. |
| |
| * systemctl will now warn you if .mount units generated from |
| /etc/fstab are out of date due to changes in fstab that |
| haven't been read by systemd yet. |
| |
| * systemd is now suitable for usage in initrds. Dracut has |
| already been updated to make use of this. With this in place |
| initrds get a slight bit faster but primarily are much |
| easier to introspect and debug since "systemctl status" in |
| the host system can be used to introspect initrd services, |
| and the journal from the initrd is kept around too. |
| |
| * systemd-delta has been added, a tool to explore differences |
| between user/admin configuration and vendor defaults. |
| |
| * PrivateTmp= now affects both /tmp and /var/tmp. |
| |
| * Boot time status messages are now much prettier and feature |
| proper english language. Booting up systemd has never been |
| so sexy. |
| |
| * Read-ahead pack files now include the inode number of all |
| files to pre-cache. When the inode changes the pre-caching |
| is not attempted. This should be nicer to deal with updated |
| packages which might result in changes of read-ahead |
| patterns. |
| |
| * We now temporaritly lower the kernel's read_ahead_kb variable |
| when collecting read-ahead data to ensure the kernel's |
| built-in read-ahead does not add noise to our measurements |
| of necessary blocks to pre-cache. |
| |
| * There's now RequiresMountsFor= to add automatic dependencies |
| for all mounts necessary for a specific file system path. |
| |
| * MountAuto= and SwapAuto= have been removed from |
| system.conf. Mounting file systems at boot has to take place |
| in systemd now. |
| |
| * nspawn now learned a new switch --uuid= to set the machine |
| ID on the command line. |
| |
| * nspawn now learned the -b switch to automatically search |
| for an init system. |
| |
| * vt102 is now the default TERM for serial TTYs, upgraded from |
| vt100. |
| |
| * systemd-logind now works on VT-less systems. |
| |
| * The build tree has been reorganized. The individual |
| components now have directories of their own. |
| |
| * A new condition type ConditionPathIsReadWrite= is now available. |
| |
| * nspawn learned the new -C switch to create cgroups for the |
| container in other hierarchies. |
| |
| * We now have support for hardware watchdogs, configurable in |
| system.conf. |
| |
| * The scheduled shutdown logic now has a public API. |
| |
| * We now mount /tmp as tmpfs by default, but this can be |
| masked and /etc/fstab can override it. |
| |
| * Since udisks doesn't make use of /media anymore we are not |
| mounting a tmpfs on it anymore. |
| |
| * journalctl gained a new --local switch to only interleave |
| locally generated journal files. |
| |
| * We can now load the IMA policy at boot automatically. |
| |
| * The GTK tools have been split off into a systemd-ui. |
| |
| Contributions from: Andreas Schwab, Auke Kok, Ayan George, |
| Colin Guthrie, Daniel Mack, Dave Reisner, David Ward, Elan |
| Ruusamäe, Frederic Crozat, Gergely Nagy, Guillermo Vidal, |
| Hannes Reinecke, Harald Hoyer, Javier Jardón, Kay Sievers, |
| Lennart Poettering, Lucas De Marchi, Léo Gillot-Lamure, |
| Marc-Antoine Perennou, Martin Pitt, Matthew Monaco, Maxim |
| A. Mikityanskiy, Michael Biebl, Michael Olbrich, Michal |
| Schmidt, Nis Martensen, Patrick McCarty, Roberto Sassu, Shawn |
| Landden, Sjoerd Simons, Sven Anders, Tollef Fog Heen, Tom |
| Gundersen |
| |
| CHANGES WITH 44: |
| * This is mostly a bugfix release |
| |
| * Support optional initialization of the machine ID from the |
| KVM or container configured UUID. |
| |
| * Support immediate reboots with "systemctl reboot -ff" |
| |
| * Show /etc/os-release data in systemd-analyze output |
| |
| * Many bugfixes for the journal, including endianess fixes and |
| ensuring that disk space enforcement works |
| |
| * sd-login.h is C++ comptaible again |
| |
| * Extend the /etc/os-release format on request of the Debian |
| folks |
| |
| * We now refuse non-UTF8 strings used in various configuration |
| and unit files. This is done to ensure we don't pass invalid |
| data over D-Bus or expose it elsewhere. |
| |
| * Register Mimo USB Screens as suitable for automatic seat |
| configuration |
| |
| * Read SELinux client context from journal clients in a race |
| free fashion |
| |
| * Reorder configuration file lookup order. /etc now always |
| overrides /run in order to allow the administrator to always |
| and unconditionally override vendor supplied or |
| automatically generated data. |
| |
| * The various user visible bits of the journal now have man |
| pages. We still lack man pages for the journal API calls |
| however. |
| |
| * We now ship all man pages in HTML format again in the |
| tarball. |
| |
| Contributions from: Dave Reisner, Dirk Eibach, Frederic |
| Crozat, Harald Hoyer, Kay Sievers, Lennart Poettering, Marti |
| Raudsepp, Michal Schmidt, Shawn Landden, Tero Roponen, Thierry |
| Reding |
| |
| CHANGES WITH 43: |
| * This is mostly a bugfix release |
| |
| * systems lacking /etc/os-release are no longer supported. |
| |
| * Various functionality updates to libsystemd-login.so |
| |
| * Track class of PAM logins to distuingish greeters from |
| normal user logins. |
| |
| Contributions from: Kay Sievers, Lennart Poettering, Michael |
| Biebl |
| |
| CHANGES WITH 42: |
| * This is an important bugfix release for v41. |
| |
| * Building man pages is now optional which should be useful |
| for those building systemd from git but unwilling to install |
| xsltproc. |
| |
| * Watchdog support for supervising services is now usable. In |
| a future release support for hardware watchdogs |
| (i.e. /dev/watchdog) will be added building on this. |
| |
| * Service start rate limiting is now configurable and can be |
| turned off per service. When a start rate limit is hit a |
| reboot can automatically be triggered. |
| |
| * New CanReboot(), CanPowerOff() bus calls in systemd-logind. |
| |
| Contributions from: Benjamin Franzke, Bill Nottingham, |
| Frederic Crozat, Lennart Poettering, Michael Olbrich, Michal |
| Schmidt, Michał Górny, Piotr Drąg |
| |
| CHANGES WITH 41: |
| * The systemd binary is installed /usr/lib/systemd/systemd now; |
| An existing /sbin/init symlink needs to be adapted with the |
| package update. |
| |
| * The code that loads kernel modules has been ported to invoke |
| libkmod directly, instead of modprobe. This means we do not |
| support systems with module-init-tools anymore. |
| |
| * Watchdog support is now already useful, but still not |
| complete. |
| |
| * A new kernel command line option systemd.setenv= is |
| understood to set system wide environment variables |
| dynamically at boot. |
| |
| * We now limit the set of capabilities of systemd-journald. |
| |
| * We now set SIGPIPE to ignore by default, since it only is |
| useful in shell pipelines, and has little use in general |
| code. This can be disabled with IgnoreSIPIPE=no in unit |
| files. |
| |
| Contributions from: Benjamin Franzke, Kay Sievers, Lennart |
| Poettering, Michael Olbrich, Michal Schmidt, Tom Gundersen, |
| William Douglas |
| |
| CHANGES WITH 40: |
| * This is mostly a bugfix release |
| |
| * We now expose the reason why a service failed in the |
| "Result" D-Bus property. |
| |
| * Rudimentary service watchdog support (will be completed over |
| the next few releases.) |
| |
| * When systemd forks off in order execute some service we will |
| now immediately changes its argv[0] to reflect which process |
| it will execute. This is useful to minimize the time window |
| with a generic argv[0], which makes bootcharts more useful |
| |
| Contributions from: Alvaro Soliverez, Chris Paulson-Ellis, Kay |
| Sievers, Lennart Poettering, Michael Olbrich, Michal Schmidt, |
| Mike Kazantsev, Ray Strode |
| |
| CHANGES WITH 39: |
| * This is mostly a test release, but incorporates many |
| bugfixes. |
| |
| * New systemd-cgtop tool to show control groups by their |
| resource usage. |
| |
| * Linking against libacl for ACLs is optional again. If |
| disabled, support tracking device access for active logins |
| goes becomes unavailable, and so does access to the user |
| journals by the respective users. |
| |
| * If a group "adm" exists, journal files are automatically |
| owned by them, thus allow members of this group full access |
| to the system journal as well as all user journals. |
| |
| * The journal now stores the SELinux context of the logging |
| client for all entries. |
| |
| * Add C++ inclusion guards to all public headers |
| |
| * New output mode "cat" in the journal to print only text |
| messages, without any meta data like date or time. |
| |
| * Include tiny X server wrapper as a temporary stop-gap to |
| teach XOrg udev display enumeration. This is used by display |
| managers such as gdm, and will go away as soon as XOrg |
| learned native udev hotplugging for display devices. |
| |
| * Add new systemd-cat tool for executing arbitrary programs |
| with STDERR/STDOUT connected to the journal. Can also act as |
| BSD logger replacement, and does so by default. |
| |
| * Optionally store all locally generated coredumps in the |
| journal along with meta data. |
| |
| * systemd-tmpfiles learnt four new commands: n, L, c, b, for |
| writing short strings to files (for usage for /sys), and for |
| creating symlinks, character and block device nodes. |
| |
| * New unit file option ControlGroupPersistent= to make cgroups |
| persistent, following the mechanisms outlined in |
| http://www.freedesktop.org/wiki/Software/systemd/PaxControlGroups |
| |
| * Support multiple local RTCs in a sane way |
| |
| * No longer monopolize IO when replaying readahead data on |
| rotating disks, since we might starve non-file-system IO to |
| death, since fanotify() will not see accesses done by blkid, |
| or fsck. |
| |
| * Don't show kernel threads in systemd-cgls anymore, unless |
| requested with new -k switch. |
| |
| Contributions from: Dan Horák, Kay Sievers, Lennart |
| Poettering, Michal Schmidt |
| |
| CHANGES WITH 38: |
| * This is mostly a test release, but incorporates many |
| bugfixes. |
| |
| * The git repository moved to: |
| git://anongit.freedesktop.org/systemd/systemd |
| ssh://git.freedesktop.org/git/systemd/systemd |
| |
| * First release with the journal |
| http://0pointer.de/blog/projects/the-journal.html |
| |
| * The journal replaces both systemd-kmsg-syslogd and |
| systemd-stdout-bridge. |
| |
| * New sd_pid_get_unit() API call in libsystemd-logind |
| |
| * Many systemadm clean-ups |
| |
| * Introduce remote-fs-pre.target which is ordered before all |
| remote mounts and may be used to start services before all |
| remote mounts. |
| |
| * Added Mageia support |
| |
| * Add bash completion for systemd-loginctl |
| |
| * Actively monitor PID file creation for daemons which exit in |
| the parent process before having finished writing the PID |
| file in the daemon process. Daemons which do this need to be |
| fixed (i.e. PID file creation must have finished before the |
| parent exits), but we now react a bit more gracefully to them. |
| |
| * Add colourful boot output, mimicking the well-known output |
| of existing distributions. |
| |
| * New option PassCredentials= for socket units, for |
| compatibility with a recent kernel ABI breakage. |
| |
| * /etc/rc.local is now hooked in via a generator binary, and |
| thus will no longer act as synchronization point during |
| boot. |
| |
| * systemctl list-unit-files now supports --root=. |
| |
| * systemd-tmpfiles now understands two new commands: z, Z for |
| relabelling files according to the SELinux database. This is |
| useful to apply SELinux labels to specific files in /sys, |
| among other things. |
| |
| * Output of SysV services is now forwarded to both the console |
| and the journal by default, not only just the console. |
| |
| * New man pages for all APIs from libsystemd-login. |
| |
| * The build tree got reorganized and a the build system is a |
| lot more modular allowing embedded setups to specifically |
| select the components of systemd they are interested in. |
| |
| * Support for Linux systems lacking the kernel VT subsystem is |
| restored. |
| |
| * configure's --with-rootdir= got renamed to |
| --with-rootprefix= to follow the naming used by udev and |
| kmod |
| |
| * Unless specified otherwise we'll now install to /usr instead |
| of /usr/local by default. |
| |
| * Processes with '@' in argv[0][0] are now excluded from the |
| final shut-down killing spree, following the logic explained |
| in: |
| http://www.freedesktop.org/wiki/Software/systemd/RootStorageDaemons |
| |
| * All processes remaining in a service cgroup when we enter |
| the START or START_PRE states are now killed with |
| SIGKILL. That means it is no longer possible to spawn |
| background processes from ExecStart= lines (which was never |
| supported anyway, and bad style). |
| |
| * New PropagateReloadTo=/PropagateReloadFrom= options to bind |
| reloading of units together. |
| |
| Contributions from: Bill Nottingham, Daniel J. Walsh, Dave |
| Reisner, Dexter Morgan, Gregs Gregs, Jonathan Nieder, Kay |
| Sievers, Lennart Poettering, Michael Biebl, Michal Schmidt, |
| Michał Górny, Ran Benita, Thomas Jarosch, Tim Waugh, Tollef |
| Fog Heen, Tom Gundersen, Zbigniew Jędrzejewski-Szmek |