| #compdef systemctl loginctl journalctl hostnamectl localectl timedatectl systemd-coredumpctl udevadm systemd-analyze systemd-cat systemd-ask-password systemd-cgls systemd-cgtop systemd-delta systemd-detect-virt systemd-inhibit systemd-machine-id-setup systemd-notify systemd-nspawn systemd-tmpfiles systemd-tty-ask-password-agent |
| |
| _ctls() |
| { |
| local curcontext="$curcontext" state lstate line |
| case "$service" in |
| systemctl) |
| # -s for aggregated options like -aP |
| _arguments -s \ |
| {-h,--help}'[Show help]' \ |
| '--version[Show package version]' \ |
| {-t,--type=}'[List only units of a particular type]:unit type:(automount device mount path service snapshot socket swap target timer)' \ |
| \*{-p,--property=}'[Show only properties by specific name]:unit property' \ |
| {-a,--all}'[Show all units/properties, including dead/empty ones]' \ |
| '--reverse[Show reverse dependencies]' \ |
| '--after[Show units ordered after]' \ |
| '--before[Show units ordered before]' \ |
| '--failed[Show only failed units]' \ |
| "--full[Don't ellipsize unit names on output]" \ |
| '--fail[When queueing a new job, fail if conflicting jobs are pending]' \ |
| '--ignore-dependencies[When queueing a new job, ignore all its dependencies]' \ |
| '--kill-who=[Who to send signal to]:killwho:(main control all)' \ |
| {-s,--signal=}'[Which signal to send]:signal:_signals' \ |
| {-H,--host=}'[Show information for remote host]:userathost:_hosts_or_user_at_host' \ |
| {-P,--privileged}'[Acquire privileges before execution]' \ |
| {-q,--quiet}'[Suppress output]' \ |
| '--no-block[Do not wait until operation finished]' \ |
| "--no-wall[Don't send wall message before halt/power-off/reboot]" \ |
| "--no-reload[When enabling/disabling unit files, don't reload daemon configuration]" \ |
| '--no-legend[Do not print a legend, i.e. the column headers and the footer with hints]' \ |
| '--no-pager[Do not pipe output into a pager]' \ |
| '--no-ask-password[Do not ask for system passwords]' \ |
| '--system[Connect to system manager]' \ |
| '--user[Connect to user service manager]' \ |
| '--global[Enable/disable unit files globally]' \ |
| {-f,--force}'[When enabling unit files, override existing symlinks. When shutting down, execute action immediately]' \ |
| '--root=[Enable unit files in the specified root directory]:directory:_directories' \ |
| '--runtime[Enable unit files only temporarily until next reboot]' \ |
| {-n,--lines=}'[Journal entries to show]:number of entries' \ |
| {-o,--output=}'[Change journal output mode]:modes:_outputmodes' \ |
| '*::systemctl command:_systemctl_command' |
| ;; |
| loginctl) |
| _arguments -s \ |
| {-h,--help}'[Show help]' \ |
| '--version[Show package version]' \ |
| \*{-p,--property=}'[Show only properties by this name]:unit property' \ |
| {-a,--all}'[Show all properties, including empty ones]' \ |
| '--kill-who=[Who to send signal to]:killwho:(main control all)' \ |
| {-s,--signal=}'[Which signal to send]:signal:_signals' \ |
| '--no-ask-password[Do not ask for system passwords]' \ |
| {-H,--host=}'[Show information for remote host]:userathost:_hosts_or_user_at_host' \ |
| {-P,--privileged}'[Acquire privileges before execution]' \ |
| '--no-pager[Do not pipe output into a pager]' \ |
| '*::loginctl command:_loginctl_command' |
| ;; |
| |
| hostnamectl) |
| _arguments -s \ |
| {-h,--help}'[Show this help]' \ |
| '--version[Show package version]' \ |
| '--transient[Only set transient hostname]' \ |
| '--static[Only set static hostname]' \ |
| '--pretty[Only set pretty hostname]' \ |
| '--no-ask-password[Do not prompt for password]' \ |
| {-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \ |
| '*::hostnamectl commands:_hostnamectl_command' |
| ;; |
| journalctl) |
| _arguments -s \ |
| '--since=[Start showing entries newer or of the specified date]:YYYY-MM-DD HH\:MM\:SS' \ |
| '--until=[Stop showing entries older or of the specified date]:YYYY-MM-DD HH\:MM\:SS' \ |
| {-c,--cursor=}'[Start showing entries from specified cursor]:cursors:_journal_fields __CURSORS' \ |
| {-b,--this-boot}'[Show data only from current boot]' \ |
| {-u,--unit=}'[Show data only from the specified unit]:units:_journal_fields _SYSTEMD_UNIT' \ |
| '--user-unit[Show data only from the specified user session unit]:units:_journal_fields _SYSTEMD_USER_UNIT' \ |
| {-p,--priority=}'[Show only messages within the specified priority range]:priority:_journal_fields PRIORITY' \ |
| {-f,--follow}'[Follow journal]' \ |
| {-n,--lines=}'[Number of journal entries to show]:integer' \ |
| '--no-tail[Show all lines, even in follow mode]' \ |
| {-o,--output=}'[Change journal output mode]:output modes:_outputmodes' \ |
| '--full[Show long fields in full]' \ |
| {-a,--all}'[Show all fields, including long and unprintable]' \ |
| {-q,--quiet}"[Don't show privilege warning]" \ |
| '--no-pager[Do not pipe output into a pager]' \ |
| {-m,--merge}'[Show entries from all available journals]' \ |
| {-D,--directory=}'[Show journal files from directory]:directories:_directories' \ |
| '--interval=[Time interval for changing the FSS sealing key]:time interval' \ |
| '--verify-key=[Specify FSS verification key]:FSS key' \ |
| {-h,--help}'[Show this help]' \ |
| '--version[Show package version]' \ |
| '--new-id128[Generate a new 128 Bit ID]' \ |
| '--header[Show journal header information]' \ |
| '--disk-usage[Show total disk usage]' \ |
| {-F,--field=}'[List all values a certain field takes]:Fields:_list_fields' \ |
| '--setup-keys[Generate new FSS key pair]' \ |
| '--verify[Verify journal file consistency]' \ |
| '--list-catalog[List messages in catalog]' \ |
| '--update-catalog[Update binary catalog database]' \ |
| '*::default: _journal_none' |
| ;; |
| localectl) |
| _arguments \ |
| {-h,--help}'[Show this help]' \ |
| '--version[Show package version]' \ |
| "--no-convert[Don't convert keyboard mappings]" \ |
| '--no-pager[Do not pipe output into a pager]' \ |
| '--no-ask-password[Do not prompt for password]' \ |
| {-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \ |
| '*::localectl commands:_localectl_command' |
| ;; |
| systemd-coredumpctl) |
| _arguments \ |
| {-o,--output=}'[Write output to FILE]:output file:_files' \ |
| '--no-pager[Do not pipe output into a pager]' \ |
| {-h,--help}'[Show this help]' \ |
| '--version[Show package version]' \ |
| '*::systemd-coredumpctl commands:_systemd-coredumpctl_command' |
| |
| ;; |
| timedatectl) |
| _arguments -s \ |
| {-h,--help}'[Show this help]' \ |
| '--version[Show package version]' \ |
| '--adjust-system-clock[Adjust system clock when changing local RTC mode]' \ |
| '--no-pager[Do not pipe output into a pager]' \ |
| '--no-ask-password[Do not prompt for password]' \ |
| {-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \ |
| '*::timedatectl commands:_timedatectl_command' |
| ;; |
| udevadm) |
| _arguments \ |
| '--debug[Print debug messages to stderr]' \ |
| '--version[Print version number]' \ |
| '--help[Print help text]' \ |
| '*::udevadm commands:_udevadm_command' |
| ;; |
| systemd-analyze) |
| _arguments \ |
| {-h,--help}'[Show help text.]' \ |
| '--user[Shows performance data of user sessions instead of the system manager.]' \ |
| '--order[When generating graph for dot, show only order]' \ |
| '--require[When generating graph for dot, show only requirement]' \ |
| '*::systemd-analyze commands:_systemd_analyze_command' |
| ;; |
| systemd-ask-password) |
| _arguments \ |
| {-h,--help}'[Show this help]' \ |
| '--icon=[Icon name]' \ |
| '--timeout=[Timeout in sec]' \ |
| '--no-tty[Ask question via agent even on TTY]' \ |
| '--accept-cached[Accept cached passwords]' \ |
| '--multiple[List multiple passwords if available]' |
| ;; |
| systemd-cat) |
| _arguments \ |
| {-h,--help}'[Show this help]' \ |
| '--version[Show package version.]' \ |
| {-t,--identifier=}'[Set syslog identifier.]' \ |
| {-p,--priority=}'[Set priority value.]:value:({0..7})' \ |
| '--level-prefix=[Control whether level prefix shall be parsed.]:boolean:(1 0)' \ |
| ':Message' |
| ;; |
| systemd-cgls) |
| _arguments \ |
| {-h,--help}'[Show this help]' \ |
| '--version[Show package version]' \ |
| '--no-pager[Do not pipe output into a pager]' \ |
| {-a,--all}'[Show all groups, including empty]' \ |
| '-k[Include kernel threads in output]' \ |
| ':cgroups:(cpuset cpu cpuacct memory devices freezer net_cls blkio)' |
| ;; |
| systemd-cgtop) |
| _arguments \ |
| {-h,--help}'[Show this help]' \ |
| '--version[Print version and exit]' \ |
| '(-c -m -i -t)-p[Order by path]' \ |
| '(-c -p -m -i)-t[Order by number of tasks]' \ |
| '(-m -p -i -t)-c[Order by CPU load]' \ |
| '(-c -p -i -t)-m[Order by memory load]' \ |
| '(-c -m -p -t)-i[Order by IO load]' \ |
| {-d,--delay=}'[Specify delay]' \ |
| {-n,--iterations=}'[Run for N iterations before exiting]' \ |
| {-b,--batch}'[Run in batch mode, accepting no input]' \ |
| '--depth=[Maximum traversal depth]' |
| ;; |
| systemd-delta) |
| _arguments \ |
| {-h,--help}'[Show this help]' \ |
| '--version[Show package version]' \ |
| '--no-pager[Do not pipe output into a pager]' \ |
| '--diff=[Show a diff when overridden files differ]:boolean:(1 0)' \ |
| {-t,--type=}'[Only display a selected set of override types]:types:(masked equivalent redirected overridden unchanged)' \ |
| ':SUFFIX:(tmpfiles.d sysctl.d systemd/system)' |
| ;; |
| systemd-detect-virt) |
| _arguments \ |
| {-h,--help}'[Show this help]' \ |
| '--version[Show package version]' \ |
| {-c,--container}'[Only detect whether we are run in a container]' \ |
| {-v,--vm}'[Only detect whether we are run in a VM]' \ |
| {-q,--quiet}"[Don't output anything, just set return value]" |
| ;; |
| systemd-inhibit) |
| _arguments \ |
| {-h,--help}'[Show this help]' \ |
| '--version[Show package version]' \ |
| '--what=[Operations to inhibit]:options:(shutdown sleep idle handle-power-key handle-suspend-key handle-hibernate-key handle-lid-switch)' \ |
| '--who=[A descriptive string who is inhibiting]' \ |
| '--why=[A descriptive string why is being inhibited]' \ |
| '--mode=[One of block or delay]' \ |
| '--list[List active inhibitors]' \ |
| '*:commands:_systemd_inhibit_command' |
| ;; |
| systemd-machine-id-setup) |
| _arguments \ |
| {-h,--help}'[Show this help]' \ |
| '--version[Show package version]' |
| ;; |
| systemd-notify) |
| _arguments \ |
| {-h,--help}'[Show this help]' \ |
| '--version[Show package version]' \ |
| '--ready[Inform the init system about service start-up completion.]' \ |
| '--pid=[Inform the init system about the main PID of the daemon]' \ |
| '--status=[Send a free-form status string for the daemon to the init systemd]' \ |
| '--booted[Returns 0 if the system was booted up with systemd]' \ |
| '--readahead=[Controls disk read-ahead operations]:arguments:(cancel done noreply)' |
| ;; |
| systemd-nspawn) |
| _arguments \ |
| {-h,--help}'[Show this help]' \ |
| {--directory=,-D}'[Directory to use as file system root for the namespace container. If omitted the current directory will be used.]:directories:_directories' \ |
| {--boot,-b}'[Automatically search for an init binary and invoke it instead of a shell or a user supplied program.]' \ |
| {--user=,-u}'[Run the command under specified user, create home directory and cd into it.]' \ |
| '--uuid=[Set the specified uuid for the container.]' \ |
| {--controllers=,-C}'[Makes the container appear in other hierarchies than the name=systemd:/ one. Takes a comma-separated list of controllers.]' \ |
| '--private-network[Turn off networking in the container. This makes all network interfaces unavailable in the container, with the exception of the loopback device.]' \ |
| '--read-only[Mount the root file system read only for the container.]' \ |
| '--capability=[List one or more additional capabilities to grant the container.]:capabilities:_systemd-nspawn' \ |
| "--link-journal=[Control whether the container's journal shall be made visible to the host system.]:options:(no, host, guest, auto)" \ |
| '-j[Equivalent to --link-journal=guest.]' |
| ;; |
| systemd-tmpfiles) |
| _arguments \ |
| '--create[Create, set ownership/permissions based on the config files.]' \ |
| '--clean[Clean up all files and directories with an age parameter configured.]' \ |
| '--remove[All files and directories marked with r, R in the configuration files are removed.]' \ |
| '--prefix=[Only apply rules that apply to paths with the specified prefix.]' \ |
| '--help[Prints a short help text and exits.]' \ |
| '*::files:_files' |
| ;; |
| systemd-tty-ask-password-agent) |
| _arguments \ |
| {-h,--help}'[Prints a short help text and exits.]' \ |
| '--version[Prints a short version string and exits.]' \ |
| '--list[Lists all currently pending system password requests.]' \ |
| '--query[Process all currently pending system password requests by querying the user on the calling TTY.]' \ |
| '--watch[Continuously process password requests.]' \ |
| '--wall[Forward password requests to wall(1).]' \ |
| '--plymouth[Ask question with plymouth(8).]' \ |
| '--console[Ask question on /dev/console.]' |
| ;; |
| *) _message 'eh?' ;; |
| esac |
| } |
| |
| _systemd-nspawn(){ |
| local -a _caps |
| _caps=( CAP_CHOWN CAP_DAC_OVERRIDE CAP_DAC_READ_SEARCH |
| CAP_FOWNER CAP_FSETID CAP_IPC_OWNER CAP_KILL CAP_LEASE CAP_LINUX_IMMUTABLE |
| CAP_NET_BIND_SERVICE CAP_NET_BROADCAST CAP_NET_RAW CAP_SETGID CAP_SETFCAP CAP_SETPCAP |
| CAP_SETUID CAP_SYS_ADMIN CAP_SYS_CHROOT CAP_SYS_NICE CAP_SYS_PTRACE CAP_SYS_TTY_CONFIG |
| CAP_SYS_RESOURCE CAP_SYS_BOOT ) |
| _values -s , 'capabilities' "$_caps[@]" |
| } |
| |
| _systemd_inhibit_command(){ |
| if (( CURRENT == 1 )); then |
| compset -q |
| _normal |
| else |
| local n=${words[(b:2:i)[^-]*]} |
| if (( n <= CURRENT )); then |
| compset -n $n |
| _alternative \ |
| 'files:file:_files' \ |
| 'commands:command:_normal' && return 0 |
| fi |
| _default |
| fi |
| |
| } |
| |
| _systemd_analyze_command(){ |
| local -a _systemd_analyze_cmds |
| # Descriptions taken from systemd-analyze --help. |
| _systemd_analyze_cmds=( |
| 'time:Print time spent in the kernel before reaching userspace' |
| 'blame:Print list of running units ordered by time to init' |
| 'critical-chain:Print a tree of the time critical chain of units' |
| 'plot:Output SVG graphic showing service initialization' |
| 'dot:Dump dependency graph (in dot(1) format)' |
| 'dump:Dump server status' |
| ) |
| |
| if (( CURRENT == 1 )); then |
| _describe "options" _systemd_analyze_cmds |
| else |
| _message "no more options" |
| fi |
| } |
| |
| _hosts_or_user_at_host() |
| { |
| _alternative \ |
| 'users-hosts:: _user_at_host' \ |
| 'hosts:: _hosts' |
| } |
| |
| _outputmodes() { |
| local -a _output_opts |
| _output_opts=(short short-monotonic verbose export json json-pretty json-see cat) |
| _describe -t output 'output mode' _output_opts || compadd "$@" |
| } |
| |
| |
| (( $+functions[_systemctl_command] )) || _systemctl_command() |
| { |
| local -a _systemctl_cmds |
| _systemctl_cmds=( |
| "list-sockets:List sockets" |
| "list-units:List units" |
| "start:Start (activate) one or more units" |
| "stop:Stop (deactivate) one or more units" |
| "reload:Reload one or more units" |
| "restart:Start or restart one or more units" |
| "condrestart:Restart one or more units if active" |
| "try-restart:Restart one or more units if active" |
| "reload-or-restart:Reload one or more units if possible, otherwise start or restart" |
| "force-reload:Reload one or more units if possible, otherwise restart if active" |
| "hibernate:Hibernate the system" |
| "hybrid-sleep:Hibernate and suspend the system" |
| "reload-or-try-restart:Reload one or more units if possible, otherwise restart if active" |
| "isolate:Start one unit and stop all others" |
| "kill:Send signal to processes of a unit" |
| "is-active:Check whether units are active" |
| "is-failed:Check whether units are failed" |
| "status:Show runtime status of one or more units" |
| "show:Show properties of one or more units/jobs or the manager" |
| "reset-failed:Reset failed state for all, one, or more units" |
| "load:Load one or more units" |
| "list-unit-files:List installed unit files" |
| "enable:Enable one or more unit files" |
| "disable:Disable one or more unit files" |
| "reenable:Reenable one or more unit files" |
| "preset:Enable/disable one or more unit files based on preset configuration" |
| "help:Show documentation for specified units" |
| "list-dependencies:Show unit dependency tree" |
| "mask:Mask one or more units" |
| "unmask:Unmask one or more units" |
| "link:Link one or more units files into the search path" |
| "is-enabled:Check whether unit files are enabled" |
| "list-jobs:List jobs" |
| "cancel:Cancel all, one, or more jobs" |
| "snapshot:Create a snapshot" |
| "delete:Remove one or more snapshots" |
| "show-environment:Dump environment" |
| "set-environment:Set one or more environment variables" |
| "unset-environment:Unset one or more environment variables" |
| "daemon-reload:Reload systemd manager configuration" |
| "daemon-reexec:Reexecute systemd manager" |
| "default:Enter system default mode" |
| "rescue:Enter system rescue mode" |
| "emergency:Enter system emergency mode" |
| "halt:Shut down and halt the system" |
| "suspend:Suspend the system" |
| "poweroff:Shut down and power-off the system" |
| "reboot:Shut down and reboot the system" |
| "kexec:Shut down and reboot the system with kexec" |
| "exit:Ask for user instance termination" |
| ) |
| |
| if (( CURRENT == 1 )); then |
| _describe -t commands 'systemctl command' _systemctl_cmds || compadd "$@" |
| else |
| local curcontext="$curcontext" |
| |
| cmd="${${_systemctl_cmds[(r)$words[1]:*]%%:*}}" |
| # Deal with any aliases |
| case $cmd in |
| condrestart) cmd="try-restart";; |
| force-reload) cmd="reload-or-try-restart";; |
| esac |
| |
| if (( $#cmd )); then |
| curcontext="${curcontext%:*:*}:systemctl-${cmd}:" |
| |
| local update_policy |
| zstyle -s ":completion:${curcontext}:" cache-policy update_policy |
| if [[ -z "$update_policy" ]]; then |
| zstyle ":completion:${curcontext}:" cache-policy _systemctl_caching_policy |
| fi |
| |
| _call_function ret _systemctl_$cmd || _message 'no more arguments' |
| else |
| _message "unknown systemctl command: $words[1]" |
| fi |
| return ret |
| fi |
| } |
| |
| __systemctl() |
| { |
| local -a _modes |
| _modes=("--user" "--system") |
| systemctl ${words:*_modes} --full --no-legend --no-pager "$@" |
| } |
| |
| |
| # Fills the unit list |
| _systemctl_all_units() |
| { |
| if ( [[ ${+_sys_all_units} -eq 0 ]] || _cache_invalid SYS_ALL_UNITS ) && |
| ! _retrieve_cache SYS_ALL_UNITS; |
| then |
| _sys_all_units=( $(__systemctl list-units --all | { while read a b; do echo " $a"; done; }) ) |
| _store_cache SYS_ALL_UNITS _sys_all_units |
| fi |
| } |
| |
| # Fills the unit list including all file units |
| _systemctl_really_all_units() |
| { |
| local -a all_unit_files; |
| local -a really_all_units; |
| if ( [[ ${+_sys_really_all_units} -eq 0 ]] || _cache_invalid SYS_REALLY_ALL_UNITS ) && |
| ! _retrieve_cache SYS_REALLY_ALL_UNITS; |
| then |
| all_unit_files=( $(__systemctl list-unit-files | { while read a b; do echo " $a"; done; }) ) |
| _systemctl_all_units |
| really_all_units=($_sys_all_units $all_unit_files) |
| _sys_really_all_units=(${(u)really_all_units}) |
| _store_cache SYS_REALLY_ALL_UNITS _sys_really_all_units |
| fi |
| } |
| |
| _filter_units_by_property() { |
| local property=$1 value=$2 ; shift ; shift |
| local -a units ; units=($*) |
| local prop unit |
| for ((i=1; $i <= ${#units[*]}; i++)); do |
| # FIXME: "Failed to issue method call: Unknown unit" errors are ignored for |
| # now (related to DBUS_ERROR_UNKNOWN_OBJECT). in the future, we need to |
| # revert to calling 'systemctl show' once for all units, which is way |
| # faster |
| unit=${units[i]} |
| prop=${(f)"$(_call_program units "$service show --no-pager --property="$property" ${unit} 2>/dev/null")"} |
| if [[ "${prop}" = "$property=$value" ]]; then |
| echo " ${unit}" |
| fi |
| done |
| } |
| |
| _systemctl_active_units() {_sys_active_units=( $(__systemctl list-units | { while read a b; do echo " $a"; done; }) )} |
| _systemctl_inactive_units(){_sys_inactive_units=($(__systemctl list-units --all | { while read a b c d; do [[ $c == "inactive" || $c == "failed" ]] && echo " $a"; done; }) )} |
| _systemctl_failed_units() {_sys_failed_units=( $(__systemctl list-units --failed | { while read a b; do echo " $a"; done; }) )} |
| _systemctl_enabled_units() {_sys_enabled_units=( $(__systemctl list-unit-files | { while read a b; do [[ $b == "enabled" ]] && echo " $a"; done; }) )} |
| _systemctl_disabled_units(){_sys_disabled_units=($(__systemctl list-unit-files | { while read a b; do [[ $b == "disabled" ]] && echo " $a"; done; }) )} |
| _systemctl_masked_units() {_sys_masked_units=( $(__systemctl list-unit-files | { while read a b; do [[ $b == "masked" ]] && echo " $a"; done; }) )} |
| |
| # Completion functions for ALL_UNITS |
| for fun in is-active is-failed is-enabled status show mask preset help list-dependencies ; do |
| (( $+functions[_systemctl_$fun] )) || _systemctl_$fun() |
| { |
| _systemctl_really_all_units |
| compadd "$@" -a - _sys_really_all_units |
| } |
| done |
| |
| # Completion functions for ENABLED_UNITS |
| for fun in disable reenable ; do |
| (( $+functions[_systemctl_$fun] )) || _systemctl_$fun() |
| { |
| _systemctl_enabled_units |
| _systemctl_disabled_units |
| compadd "$@" -a - _sys_enabled_units _sys_disabled_units |
| } |
| done |
| |
| # Completion functions for DISABLED_UNITS |
| (( $+functions[_systemctl_enable] )) || _systemctl_enable() |
| { |
| _systemctl_disabled_units |
| compadd "$@" -a - _sys_disabled_units |
| } |
| |
| # Completion functions for FAILED_UNITS |
| (( $+functions[_systemctl_reset-failed] )) || _systemctl_reset-failed() |
| { |
| _systemctl_failed_units |
| compadd "$@" -a - _sys_failed_units || _message "no failed unit found" |
| } |
| |
| # Completion functions for STARTABLE_UNITS |
| (( $+functions[_systemctl_start] )) || _systemctl_start() |
| { |
| _systemctl_inactive_units |
| compadd "$@" -a - _sys_inactive_units |
| } |
| |
| # Completion functions for STOPPABLE_UNITS |
| for fun in stop kill try-restart condrestart ; do |
| (( $+functions[_systemctl_$fun] )) || _systemctl_$fun() |
| { |
| _systemctl_active_units |
| compadd "$@" - $( _filter_units_by_property CanStop yes \ |
| ${_sys_active_units[*]} ) |
| } |
| done |
| |
| # Completion functions for ISOLATABLE_UNITS |
| (( $+functions[_systemctl_isolate] )) || _systemctl_isolate() |
| { |
| _systemctl_all_units |
| compadd "$@" - $( _filter_units_by_property AllowIsolate yes \ |
| ${_sys_all_units[*]} ) |
| } |
| |
| # Completion functions for RELOADABLE_UNITS |
| for fun in reload reload-or-try-restart force-reload ; do |
| (( $+functions[_systemctl_$fun] )) || _systemctl_$fun() |
| { |
| _systemctl_active_units |
| compadd "$@" - $( _filter_units_by_property CanReload yes \ |
| ${_sys_active_units[*]} ) |
| } |
| done |
| |
| # Completion functions for RESTARTABLE_UNITS |
| for fun in restart reload-or-restart ; do |
| (( $+functions[_systemctl_$fun] )) || _systemctl_$fun() |
| { |
| _systemctl_all_units |
| compadd "$@" - $( _filter_units_by_property CanStart yes \ |
| ${_sys_all_units[*]} | while read line; do \ |
| [[ "$line" =~ \.device$ ]] || echo " $line"; \ |
| done ) |
| } |
| done |
| |
| # Completion functions for MASKED_UNITS |
| (( $+functions[_systemctl_unmask] )) || _systemctl_unmask() |
| { |
| _systemctl_masked_units |
| compadd "$@" -a - _sys_masked_units || _message "no masked unit found" |
| } |
| |
| # Completion functions for JOBS |
| (( $+functions[_systemctl_cancel] )) || _systemctl_cancel() |
| { |
| compadd "$@" - $(__systemctl list-jobs \ |
| | cut -d' ' -f1 2>/dev/null ) || _message "no job found" |
| } |
| |
| # Completion functions for SNAPSHOTS |
| (( $+functions[_systemctl_delete] )) || _systemctl_delete() |
| { |
| compadd "$@" - $(__systemctl list-units --type snapshot --all \ |
| | cut -d' ' -f1 2>/dev/null ) || _message "no snapshot found" |
| } |
| |
| # Completion functions for ENVS |
| for fun in set-environment unset-environment ; do |
| (( $+functions[_systemctl_$fun] )) || _systemctl_$fun() |
| { |
| local fun=$0 ; fun=${fun##_systemctl_} |
| local suf |
| if [[ "${fun}" = "set-environment" ]]; then |
| suf='-S=' |
| fi |
| |
| compadd "$@" ${suf} - $(systemctl show-environment \ |
| | while read line; do echo " ${line%%\=}";done ) |
| } |
| done |
| |
| (( $+functions[_systemctl_link] )) || _systemctl_link() { _files } |
| |
| # no systemctl completion for: |
| # [STANDALONE]='daemon-reexec daemon-reload default |
| # emergency exit halt kexec list-jobs list-units |
| # list-unit-files poweroff reboot rescue show-environment' |
| # [NAME]='snapshot load' |
| |
| _systemctl_caching_policy() |
| { |
| local _sysunits |
| local -a oldcache |
| |
| # rebuild if cache is more than a day old |
| oldcache=( "$1"(mh+1) ) |
| (( $#oldcache )) && return 0 |
| |
| _sysunits=($(__systemctl --all | cut -d' ' -f1)) |
| |
| if (( $#_sysunits )); then |
| for unit in $_sysunits; do |
| [[ "$unit" -nt "$1" ]] && return 0 |
| done |
| fi |
| |
| return 1 |
| } |
| |
| _list_fields() { |
| local -a journal_fields |
| journal_fields=(MESSAGE{,_ID} PRIORITY CODE_{FILE,LINE,FUNC} |
| ERRNO SYSLOG_{FACILITY,IDENTIFIER,PID} |
| _{P,U,G}ID _COMM _EXE _CMDLINE |
| _AUDIT_{SESSION,LOGINUID} |
| _SYSTEMD_{CGROUP,SESSION,UNIT,OWNER_UID} |
| _SYSTEMD_USER_UNIT |
| _SELINUX_CONTEXT _SOURCE_REALTIME_TIMESTAMP |
| _{BOOT,MACHINE}_ID _HOSTNAME _TRANSPORT |
| _KERNEL_{DEVICE,SUBSYSTEM} |
| _UDEV_{SYSNAME,DEVNODE,DEVLINK} |
| __CURSOR __{REALTIME,MONOTONIC}_TIMESTAMP) |
| _describe 'possible fields' journal_fields |
| } |
| |
| _journal_none() { |
| local -a _commands _files |
| _commands=( ${(f)"$(_call_program commands "$service" -F _EXE 2>/dev/null)"} ) |
| _alternative : \ |
| 'files:/dev files:_files -W /dev -P /dev/' \ |
| "commands:commands:($_commands[@])" \ |
| 'fields:fields:_list_fields' |
| } |
| |
| _journal_fields() { |
| local -a _fields cmd |
| cmd=("journalctl" "-F ${@[-1]}" "2>/dev/null" ) |
| _fields=( ${(f)"$(_call_program fields $cmd[@])"} ) |
| typeset -U _fields |
| _describe 'possible values' _fields |
| } |
| |
| |
| _loginctl_all_sessions(){_sys_all_sessions=($(loginctl list-sessions | { while read a b; do echo " $a"; done; }) )} |
| _loginctl_all_users() {_sys_all_users=( $(loginctl list-users | { while read a b; do echo " $a"; done; }) )} |
| _loginctl_all_seats() {_sys_all_seats=( $(loginctl list-seats | { while read a b; do echo " $a"; done; }) )} |
| |
| # Completion functions for SESSIONS |
| for fun in session-status show-session activate lock-session unlock-session terminate-session kill-session ; do |
| (( $+functions[_loginctl_$fun] )) || _loginctl_$fun() |
| { |
| _loginctl_all_sessions |
| compadd "$@" -a - _sys_all_sessions |
| } |
| done |
| |
| # Completion functions for USERS |
| for fun in user-status show-user enable-linger disable-linger terminate-user kill-user ; do |
| (( $+functions[_loginctl_$fun] )) || _loginctl_$fun() |
| { |
| _loginctl_all_users |
| compadd "$@" -a - _sys_all_users |
| } |
| done |
| |
| # Completion functions for SEATS |
| (( $+functions[_loginctl_seats] )) || _loginctl_seats() |
| { |
| _loginctl_all_seats |
| compadd "$@" -a - _sys_all_seats |
| } |
| for fun in seat-status show-seat terminate-seat ; do |
| (( $+functions[_loginctl_$fun] )) || _loginctl_$fun() |
| { _loginctl_seats } |
| done |
| |
| # Completion functions for ATTACH |
| (( $+functions[_loginctl_attach] )) || _loginctl_attach() |
| { |
| _loginctl_all_seats |
| |
| _arguments -w -C -S -s \ |
| ':seat:_loginctl_seats' \ |
| '*:device:_files' |
| } |
| |
| # no loginctl completion for: |
| # [STANDALONE]='list-sessions list-users list-seats flush-devices' |
| |
| (( $+functions[_loginctl_command] )) || _loginctl_command() |
| { |
| local -a _loginctl_cmds |
| _loginctl_cmds=( |
| "list-sessions:List sessions" |
| "session-status:Show session status" |
| "show-session:Show properties of one or more sessions" |
| "activate:Activate a session" |
| "lock-session:Screen lock one or more sessions" |
| "unlock-session:Screen unlock one or more sessions" |
| "terminate-session:Terminate one or more sessions" |
| "kill-session:Send signal to processes of a session" |
| "list-users:List users" |
| "user-status:Show user status" |
| "show-user:Show properties of one or more users" |
| "enable-linger:Enable linger state of one or more users" |
| "disable-linger:Disable linger state of one or more users" |
| "terminate-user:Terminate all sessions of one or more users" |
| "kill-user:Send signal to processes of a user" |
| "list-seats:List seats" |
| "seat-status:Show seat status" |
| "show-seat:Show properties of one or more seats" |
| "attach:Attach one or more devices to a seat" |
| "flush-devices:Flush all device associations" |
| "terminate-seat:Terminate all sessions on one or more seats" |
| ) |
| |
| if (( CURRENT == 1 )); then |
| _describe -t commands 'loginctl command' _loginctl_cmds || compadd "$@" |
| else |
| local curcontext="$curcontext" |
| |
| cmd="${${_loginctl_cmds[(r)$words[1]:*]%%:*}}" |
| |
| if (( $#cmd )); then |
| curcontext="${curcontext%:*:*}:loginctl-${cmd}:" |
| |
| _call_function ret _loginctl_$cmd || _message 'no more arguments' |
| else |
| _message "unknown loginctl command: $words[1]" |
| fi |
| return ret |
| fi |
| } |
| |
| _hostnamectl_command() { |
| local -a _hostnamectl_cmds |
| _hostnamectl_cmds=( |
| "status:Show current hostname settings" |
| "set-hostname:Set system hostname" |
| "set-icon-name:Set icon name for host" |
| ) |
| if (( CURRENT == 1 )); then |
| _describe -t commands 'hostnamectl commands' _hostnamectl_cmds || compadd "$@" |
| else |
| local curcontext="$curcontext" |
| cmd="${${_hostnamectl_cmds[(r)$words[1]:*]%%:*}}" |
| if (( $#cmd )); then |
| [[ $cmd == status ]] && msg="no options" || msg="options for $cmd" |
| _message "$msg" |
| else |
| _message "unknown hostnamectl command: $words[1]" |
| fi |
| fi |
| } |
| |
| _localectl_set-locale() { |
| local -a _confs _locales |
| local expl suf |
| _locales=( ${(f)"$(_call_program locales "$service" list-locales)"} ) |
| _confs=( ${${(f)"$(_call_program confs "locale 2>/dev/null")"}%\=*} ) |
| if [[ -prefix 1 *\= ]]; then |
| local conf=${PREFIX%%\=*} |
| compset -P1 '*=' |
| _wanted locales expl "locales configs" \ |
| _combination localeconfs confs=$conf locales "$@" - |
| else |
| compadd -S '=' $_confs |
| fi |
| } |
| |
| _localectl_set-keymap() { |
| local -a _keymaps |
| _keymaps=( ${(f)"$(_call_program locales "$service" list-keymaps)"} ) |
| if (( CURRENT <= 3 )); then |
| _describe keymaps _keymaps |
| else |
| _message "no more options" |
| fi |
| } |
| |
| _localectl_set-x11-keymap() { |
| if (( $+commands[pkg-config] )); then |
| local -a _file _layout _model _variant _options |
| local _xorg_lst |
| _xorg_lst=${"$($commands[pkg-config] xkeyboard-config --variable=xkb_base)"} |
| _file=( ${(ps:\n\!:)"$(<$_xorg_lst/rules/xorg.lst)"} ) |
| _layout=( ${${${(M)${(f)_file[1]}:# *}# }%% *} ) |
| _model=( ${${${(M)${(f)_file[2]}:# *}# }%% *} ) |
| _variant=( ${${${(M)${(f)_file[3]}:# *}# }%% *} ) |
| _options=( ${${${(M)${(f)_file[4]}:# *}# }%% *} ) |
| #_layout=( ${(f)"$( echo $_file[1] | awk '/^ / {print $1}' )"} ) |
| #_model=( ${(f)"$(echo $_file[2] | awk '/^ / {print $1}')"} ) |
| #_variant=( ${(f)"$(echo $_file[3] | awk '/^ / {print $1}')"} ) |
| #_options=( ${(f)"$(echo ${_file[4]//:/\\:} | awk '/^ / {print $1}')"} ) |
| |
| case $CURRENT in |
| 2) _describe layouts _layout ;; |
| 3) _describe models _model;; |
| 4) _describe variants _variant;; |
| 5) _describe options _options;; |
| *) _message "no more options" |
| esac |
| fi |
| } |
| |
| |
| _localectl_command() { |
| local -a _localectl_cmds |
| _localectl_cmds=( |
| 'status:Show current locale settings' |
| 'set-locale:Set system locale' |
| 'list-locales:Show known locales' |
| 'set-keymap:Set virtual console keyboard mapping' |
| 'list-keymaps:Show known virtual console keyboard mappings' |
| 'set-x11-keymap:Set X11 keyboard mapping' |
| ) |
| if (( CURRENT == 1 )); then |
| _describe -t commands 'localectl command' _localectl_cmds |
| else |
| local curcontext="$curcontext" |
| cmd="${${_localectl_cmds[(r)$words[1]:*]%%:*}}" |
| if (( $+functions[_localectl_$cmd] )); then |
| _localectl_$cmd |
| else |
| _message "no more options" |
| fi |
| fi |
| } |
| |
| _timedatectl_set-timezone(){ |
| local -a _timezones |
| _timezones=( ${(f)"$(_call_program timezones "${service}" list-timezones)"} ) |
| compadd "$_timezones[@]" |
| } |
| |
| _timedatectl_set-time(){ |
| _message "YYYY-MM-DD HH:MM:SS" |
| } |
| |
| _timedatectl_set-local-rtc(){ |
| local -a _options |
| _options=( |
| '0:Maintain RTC in universal time' |
| '1:Maintain RTC in local time' |
| ) |
| _describe options _options |
| } |
| |
| _timedatectl_set-ntp(){ |
| local -a _options |
| _options=( |
| '0:Disable NTP based network time configuration' |
| '1:Enable NTP based network time configuration' |
| ) |
| _describe options _options |
| } |
| |
| _timedatectl_command(){ |
| local -a _timedatectl_cmds |
| _timedatectl_cmds=( |
| 'status:Show current time settings' |
| 'set-time:Set system time' |
| 'set-timezone:Set system timezone' |
| 'list-timezones:Show known timezones' |
| 'set-local-rtc:Control whether RTC is in local time' |
| 'set-ntp:Control whether NTP is enabled' |
| ) |
| if (( CURRENT == 1 )); then |
| _describe -t commands 'timedatectl command' _timedatectl_cmds |
| else |
| local curcontext="$curcontext" |
| cmd="${${_timedatectl_cmds[(r)$words[1]:*]%%:*}}" |
| if (( $#cmd )); then |
| if (( $+functions[_timedatectl_$cmd] )); then |
| _timedatectl_$cmd |
| else |
| _message "no more options" |
| fi |
| else |
| _message "unknown timedatectl command: $words[1]" |
| fi |
| fi |
| } |
| _systemd-coredumpctl_command(){ |
| local -a _systemd_coredumpctl_cmds |
| _systemd_coredumpctl_cmds=( |
| 'list:List available coredumps' |
| 'dump:Print coredump to std' |
| ) |
| if (( CURRENT == 1 )); then |
| _describe -t commands 'systemd-coredumpctl command' _systemd_coredumpctl_cmds |
| else |
| local curcontext="$curcontext" |
| local -a _dumps |
| cmd="${${_systemd_coredumpctl_cmds[(r)$words[1]:*]%%:*}}" |
| if (( $#cmd )); then |
| # user can set zstyle ':completion:*:*:systemd-coredumpctl:*' sort no for coredumps to be ordered by date, otherwise they get ordered by pid |
| _dumps=( "${(foa)$(systemd-coredumpctl list | awk 'BEGIN{OFS=":"} /^\s/ {sub(/[[ \t]+/, ""); print $5,$0}' 2>/dev/null)}" ) |
| if [[ -n "$_dumps" ]]; then |
| _describe -t pids 'coredumps' _dumps |
| else |
| _message "no coredumps" |
| fi |
| else |
| _message "no more options" |
| fi |
| |
| fi |
| |
| } |
| |
| _udevadm_info(){ |
| _arguments \ |
| '--query=[Query the database for specified type of device data. It needs the --path or --name to identify the specified device.]:type:(name symlink path property all)' \ |
| '--path=[The devpath of the device to query.]:sys files:_files -P /sys/ -W /sys' \ |
| '--name=[The name of the device node or a symlink to query]:device files:_files -P /dev/ -W /dev' \ |
| '--root[Print absolute paths in name or symlink query.]' \ |
| '--attribute-walk[Print all sysfs properties of the specified device that can be used in udev rules to match the specified device]' \ |
| '--export[Print output as key/value pairs.]' \ |
| '--export-prefix=[Add a prefix to the key name of exported values.]:prefix' \ |
| '--device-id-of-file=[Print major/minor numbers of the underlying device, where the file lives on.]:files:_udevadm_mounts' \ |
| '--export-db[Export the content of the udev database.]' \ |
| '--cleanup-db[Cleanup the udev database.]' |
| } |
| |
| _udevadm_trigger(){ |
| _arguments \ |
| '--verbose[Print the list of devices which will be triggered.]' \ |
| '--dry-run[Do not actually trigger the event.]' \ |
| '--type=[Trigger a specific type of devices.]:types:(devices subsystems failed)' \ |
| '--action=[Type of event to be triggered.]:actions:(add change remove)' \ |
| '--subsystem-match=[Trigger events for devices which belong to a matching subsystem.]' \ |
| '--subsystem-nomatch=[Do not trigger events for devices which belong to a matching subsystem.]' \ |
| '--attr-match=attribute=[Trigger events for devices with a matching sysfs attribute.]' \ |
| '--attr-nomatch=attribute=[Do not trigger events for devices with a matching sysfs attribute.]' \ |
| '--property-match=[Trigger events for devices with a matching property value.]' \ |
| '--tag-match=property[Trigger events for devices with a matching tag.]' \ |
| '--sysname-match=[Trigger events for devices with a matching sys device name.]' \ |
| '--parent-match=[Trigger events for all children of a given device.]' |
| } |
| |
| _udevadm_settle(){ |
| _arguments \ |
| '--timeout=[Maximum number of seconds to wait for the event queue to become empty.]' \ |
| '--seq-start=[Wait only for events after the given sequence number.]' \ |
| '--seq-end=[Wait only for events before the given sequence number.]' \ |
| '--exit-if-exists=[Stop waiting if file exists.]:files:_files' \ |
| '--quiet[Do not print any output, like the remaining queue entries when reaching the timeout.]' \ |
| '--help[Print help text.]' |
| } |
| |
| _udevadm_control(){ |
| _arguments \ |
| '--exit[Signal and wait for systemd-udevd to exit.]' \ |
| '--log-priority=[Set the internal log level of systemd-udevd.]:priorities:(err info debug)' \ |
| '--stop-exec-queue[Signal systemd-udevd to stop executing new events. Incoming events will be queued.]' \ |
| '--start-exec-queue[Signal systemd-udevd to enable the execution of events.]' \ |
| '--reload[Signal systemd-udevd to reload the rules files and other databases like the kernel module index.]' \ |
| '--property=[Set a global property for all events.]' \ |
| '--children-max=[Set the maximum number of events.]' \ |
| '--timeout=[The maximum number of seconds to wait for a reply from systemd-udevd.]' \ |
| '--help[Print help text.]' |
| } |
| |
| _udevadm_monitor(){ |
| _arguments \ |
| '--kernel[Print the kernel uevents.]' \ |
| '--udev[Print the udev event after the rule processing.]' \ |
| '--property[Also print the properties of the event.]' \ |
| '--subsystem-match=[Filter events by subsystem/\[devtype\].]' \ |
| '--tag-match=[Filter events by property.]' \ |
| '--help[Print help text.]' |
| } |
| |
| _udevadm_test(){ |
| _arguments \ |
| '--action=[The action string.]:actions:(add change remove)' \ |
| '--subsystem=[The subsystem string.]' \ |
| '--help[Print help text.]' \ |
| '*::devpath:_files -P /sys/ -W /sys' |
| } |
| |
| _udevadm_test-builtin(){ |
| if (( CURRENT == 2 )); then |
| _arguments \ |
| '--help[Print help text]' \ |
| '*::builtins:(blkid btrfs hwdb input_id kmod path_id usb_id uaccess)' |
| elif (( CURRENT == 3 )); then |
| _arguments \ |
| '--help[Print help text]' \ |
| '*::syspath:_files -P /sys -W /sys' |
| else |
| _arguments \ |
| '--help[Print help text]' |
| fi |
| } |
| |
| _udevadm_mounts(){ |
| local dev_tmp dpath_tmp mp_tmp mline |
| |
| tmp=( "${(@f)$(< /etc/mtab)}" ) |
| dev_tmp=( "${(@)${(@)tmp%% *}:#none}" ) |
| mp_tmp=( "${(@)${(@)tmp#* }%% *}" ) |
| |
| local MATCH |
| mp_tmp=("${(@q)mp_tmp//(#m)\\[0-7](#c3)/${(#)$(( 8#${MATCH[2,-1]} ))}}") |
| dpath_tmp=( "${(@Mq)dev_tmp:#/*}" ) |
| dev_tmp=( "${(@q)dev_tmp:#/*}" ) |
| |
| _alternative \ |
| 'device-paths: device path:compadd -a dpath_tmp' \ |
| 'directories:mount point:compadd -a mp_tmp' |
| } |
| |
| |
| _udevadm_command(){ |
| local -a _udevadm_cmds |
| _udevadm_cmds=( |
| 'info:query sysfs or the udev database' |
| 'trigger:request events from the kernel' |
| 'settle:wait for the event queue to finish' |
| 'control:control the udev daemon' |
| 'monitor:listen to kernel and udev events' |
| 'test:test an event run' |
| 'test-builtin:test a built-in command' |
| ) |
| |
| if ((CURRENT == 1)); then |
| _describe -t commands 'udevadm commands' _udevadm_cmds |
| else |
| local curcontext="$curcontext" |
| cmd="${${_udevadm_cmds[(r)$words[1]:*]%%:*}}" |
| if (($#cmd)); then |
| if (( $+functions[_udevadm_$cmd] )); then |
| _udevadm_$cmd |
| else |
| _message "no options for $cmd" |
| fi |
| else |
| _message "no more options" |
| fi |
| fi |
| } |
| |
| _ctls "$@" |
| |
| #vim: set ft=zsh sw=4 ts=4 et |