| <?xml version='1.0'?> <!--*-nxml-*--> |
| <!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" |
| "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> |
| |
| <!-- |
| This file is part of systemd. |
| |
| Copyright 2013 Tom Gundersen |
| |
| systemd is free software; you can redistribute it and/or modify it |
| under the terms of the GNU Lesser General Public License as published by |
| the Free Software Foundation; either version 2.1 of the License, or |
| (at your option) any later version. |
| |
| systemd is distributed in the hope that it will be useful, but |
| WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| Lesser General Public License for more details. |
| |
| You should have received a copy of the GNU Lesser General Public License |
| along with systemd; If not, see <http://www.gnu.org/licenses/>. |
| --> |
| |
| <refentry id="systemd.netdev" conditional='ENABLE_NETWORKD'> |
| |
| <refentryinfo> |
| <title>systemd.network</title> |
| <productname>systemd</productname> |
| |
| <authorgroup> |
| <author> |
| <contrib>Developer</contrib> |
| <firstname>Tom</firstname> |
| <surname>Gundersen</surname> |
| <email>teg@jklm.no</email> |
| </author> |
| </authorgroup> |
| </refentryinfo> |
| |
| <refmeta> |
| <refentrytitle>systemd.netdev</refentrytitle> |
| <manvolnum>5</manvolnum> |
| </refmeta> |
| |
| <refnamediv> |
| <refname>systemd.netdev</refname> |
| <refpurpose>Virtual Network Device configuration</refpurpose> |
| </refnamediv> |
| |
| <refsynopsisdiv> |
| <para><filename><replaceable>netdev</replaceable>.netdev</filename></para> |
| </refsynopsisdiv> |
| |
| <refsect1> |
| <title>Description</title> |
| |
| <para>Network setup is performed by |
| <citerefentry><refentrytitle>systemd-networkd</refentrytitle><manvolnum>8</manvolnum></citerefentry>. |
| </para> |
| |
| <para>The main Virtual Network Device file must have the extension <filename>.netdev</filename>; |
| other extensions are ignored. Virtual network devices are created as soon as networkd is |
| started. If a netdev with the specified name already exists, networkd will use that as-is rather |
| than create its own. Note that the settings of the pre-existing netdev will not be changed by |
| networkd.</para> |
| |
| <para>The <filename>.netdev</filename> files are read from the files located in the system |
| network directory <filename>/lib/systemd/network</filename>, the volatile runtime network |
| directory <filename>/run/systemd/network</filename> and the local administration network |
| directory <filename>/etc/systemd/network</filename>. All configuration files are collectively |
| sorted and processed in lexical order, regardless of the directories in which they live. |
| However, files with identical filenames replace each other. Files in <filename>/etc</filename> |
| have the highest priority, files in <filename>/run</filename> take precedence over files with |
| the same name in <filename>/lib</filename>. This can be used to override a system-supplied |
| configuration file with a local file if needed. As a special case, an empty file (file size 0) |
| or symlink with the same name pointing to <filename>/dev/null</filename> disables the |
| configuration file entirely (it is "masked").</para> |
| |
| <para>Along with the netdev file <filename>foo.netdev</filename>, a "drop-in" directory |
| <filename>foo.netdev.d/</filename> may exist. All files with the suffix <literal>.conf</literal> |
| from this directory will be parsed after the file itself is parsed. This is useful to alter or |
| add configuration settings, without having to modify the main configuration file. Each drop-in |
| file must have appropriate section headers.</para> |
| |
| <para>In addition to <filename>/etc/systemd/network</filename>, drop-in <literal>.d</literal> |
| directories can be placed in <filename>/lib/systemd/network</filename> or |
| <filename>/run/systemd/network</filename> directories. Drop-in files in |
| <filename>/etc</filename> take precedence over those in <filename>/run</filename> which in turn |
| take precedence over those in <filename>/lib</filename>. Drop-in files under any of these |
| directories take precedence over the main netdev file wherever located. (Of course, since |
| <filename>/run</filename> is temporary and <filename>/lib</filename> is for vendors, it is |
| unlikely drop-ins should be used in either of those places.)</para> |
| </refsect1> |
| |
| <refsect1> |
| <title>Supported netdev kinds</title> |
| |
| <para>The following kinds of virtual network devices may be |
| configured in <filename>.netdev</filename> files:</para> |
| |
| <table> |
| <title>Supported kinds of virtual network devices</title> |
| |
| <tgroup cols='2'> |
| <colspec colname='kind' /> |
| <colspec colname='explanation' /> |
| <thead><row> |
| <entry>Kind</entry> |
| <entry>Description</entry> |
| </row></thead> |
| <tbody> |
| <row><entry><varname>bond</varname></entry> |
| <entry>A bond device is an aggregation of all its slave devices. See <ulink url="https://www.kernel.org/doc/Documentation/networking/bonding.txt">Linux Ethernet Bonding Driver HOWTO</ulink> for details.Local configuration</entry></row> |
| |
| <row><entry><varname>bridge</varname></entry> |
| <entry>A bridge device is a software switch, and each of its slave devices and the bridge itself are ports of the switch.</entry></row> |
| |
| <row><entry><varname>dummy</varname></entry> |
| <entry>A dummy device drops all packets sent to it.</entry></row> |
| |
| <row><entry><varname>gre</varname></entry> |
| <entry>A Level 3 GRE tunnel over IPv4. See <ulink url="https://tools.ietf.org/html/rfc2784">RFC 2784</ulink> for details.</entry></row> |
| |
| <row><entry><varname>gretap</varname></entry> |
| <entry>A Level 2 GRE tunnel over IPv4.</entry></row> |
| |
| <row><entry><varname>ip6gre</varname></entry> |
| <entry>A Level 3 GRE tunnel over IPv6.</entry></row> |
| |
| <row><entry><varname>ip6tnl</varname></entry> |
| <entry>An IPv4 or IPv6 tunnel over IPv6</entry></row> |
| |
| <row><entry><varname>ip6gretap</varname></entry> |
| <entry>A Level 2 GRE tunnel over IPv6.</entry></row> |
| |
| <row><entry><varname>ipip</varname></entry> |
| <entry>An IPv4 over IPv4 tunnel.</entry></row> |
| |
| <row><entry><varname>ipvlan</varname></entry> |
| <entry>An ipvlan device is a stacked device which receives packets from its underlying device based on IP address filtering.</entry></row> |
| |
| <row><entry><varname>macvlan</varname></entry> |
| <entry>A macvlan device is a stacked device which receives packets from its underlying device based on MAC address filtering.</entry></row> |
| |
| <row><entry><varname>macvtap</varname></entry> |
| <entry>A macvtap device is a stacked device which receives packets from its underlying device based on MAC address filtering.</entry></row> |
| |
| <row><entry><varname>sit</varname></entry> |
| <entry>An IPv6 over IPv4 tunnel.</entry></row> |
| |
| <row><entry><varname>tap</varname></entry> |
| <entry>A persistent Level 2 tunnel between a network device and a device node.</entry></row> |
| |
| <row><entry><varname>tun</varname></entry> |
| <entry>A persistent Level 3 tunnel between a network device and a device node.</entry></row> |
| |
| <row><entry><varname>veth</varname></entry> |
| <entry>An Ethernet tunnel between a pair of network devices.</entry></row> |
| |
| <row><entry><varname>vlan</varname></entry> |
| <entry>A VLAN is a stacked device which receives packets from its underlying device based on VLAN tagging. See <ulink url="http://www.ieee802.org/1/pages/802.1Q.html">IEEE 802.1Q</ulink> for details.</entry></row> |
| |
| <row><entry><varname>vti</varname></entry> |
| <entry>An IPv4 over IPSec tunnel.</entry></row> |
| |
| <row><entry><varname>vti6</varname></entry> |
| <entry>An IPv6 over IPSec tunnel.</entry></row> |
| |
| <row><entry><varname>vxlan</varname></entry> |
| <entry>A virtual extensible LAN (vxlan), for connecting Cloud computing deployments.</entry></row> |
| |
| <row><entry><varname>geneve</varname></entry> |
| <entry>A GEneric NEtwork Virtualization Encapsulation (GENEVE) netdev driver.</entry></row> |
| |
| <row><entry><varname>vrf</varname></entry> |
| <entry>A Virtual Routing and Forwarding (<ulink url="https://www.kernel.org/doc/Documentation/networking/vrf.txt">VRF</ulink>) interface to create separate routing and forwarding domains.</entry></row> |
| |
| <row><entry><varname>vcan</varname></entry> |
| <entry>The virtual CAN driver (vcan). Similar to the network loopback devices, vcan offers a virtual local CAN interface.</entry></row> |
| |
| </tbody> |
| </tgroup> |
| </table> |
| |
| </refsect1> |
| |
| <refsect1> |
| <title>[Match] Section Options</title> |
| |
| <para>A virtual network device is only created if the |
| <literal>[Match]</literal> section matches the current |
| environment, or if the section is empty. The following keys are |
| accepted:</para> |
| |
| <variablelist class='network-directives'> |
| <varlistentry> |
| <term><varname>Host=</varname></term> |
| <listitem> |
| <para>Matches against the hostname or machine ID of the |
| host. See <literal>ConditionHost=</literal> in |
| <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> |
| for details. |
| </para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>Virtualization=</varname></term> |
| <listitem> |
| <para>Checks whether the system is executed in a virtualized |
| environment and optionally test whether it is a specific |
| implementation. See |
| <literal>ConditionVirtualization=</literal> in |
| <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> |
| for details. |
| </para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>KernelCommandLine=</varname></term> |
| <listitem> |
| <para>Checks whether a specific kernel command line option |
| is set (or if prefixed with the exclamation mark unset). See |
| <literal>ConditionKernelCommandLine=</literal> in |
| <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> |
| for details. |
| </para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>Architecture=</varname></term> |
| <listitem> |
| <para>Checks whether the system is running on a specific |
| architecture. See <literal>ConditionArchitecture=</literal> in |
| <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> |
| for details. |
| </para> |
| </listitem> |
| </varlistentry> |
| </variablelist> |
| |
| </refsect1> |
| |
| <refsect1> |
| <title>[NetDev] Section Options</title> |
| |
| <para>The <literal>[NetDev]</literal> section accepts the |
| following keys:</para> |
| |
| <variablelist class='network-directives'> |
| <varlistentry> |
| <term><varname>Description=</varname></term> |
| <listitem> |
| <para>A free-form description of the netdev.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>Name=</varname></term> |
| <listitem> |
| <para>The interface name used when creating the netdev. |
| This option is compulsory.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>Kind=</varname></term> |
| <listitem> |
| <para>The netdev kind. This option is compulsory. See the |
| <literal>Supported netdev kinds</literal> section for the |
| valid keys.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>MTUBytes=</varname></term> |
| <listitem> |
| <para>The maximum transmission unit in bytes to set for |
| the device. The usual suffixes K, M, G, are supported and |
| are understood to the base of 1024. This key is not |
| currently supported for <literal>tun</literal> or |
| <literal>tap</literal> devices. |
| </para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>MACAddress=</varname></term> |
| <listitem> |
| <para>The MAC address to use for the device. If none is |
| given, one is generated based on the interface name and |
| the |
| <citerefentry><refentrytitle>machine-id</refentrytitle><manvolnum>5</manvolnum></citerefentry>. |
| This key is not currently supported for |
| <literal>tun</literal> or <literal>tap</literal> devices. |
| </para> |
| </listitem> |
| </varlistentry> |
| </variablelist> |
| </refsect1> |
| |
| <refsect1> |
| <title>[Bridge] Section Options</title> |
| |
| <para>The <literal>[Bridge]</literal> section only applies for |
| netdevs of kind <literal>bridge</literal>, and accepts the |
| following keys:</para> |
| |
| <variablelist class='network-directives'> |
| <varlistentry> |
| <term><varname>HelloTimeSec=</varname></term> |
| <listitem> |
| <para>HelloTimeSec specifies the number of seconds between two hello packets |
| sent out by the root bridge and the designated bridges. Hello packets are |
| used to communicate information about the topology throughout the entire |
| bridged local area network.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>MaxAgeSec=</varname></term> |
| <listitem> |
| <para>MaxAgeSec specifies the number of seconds of maximum message age. |
| If the last seen (received) hello packet is more than this number of |
| seconds old, the bridge in question will start the takeover procedure |
| in attempt to become the Root Bridge itself.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>ForwardDelaySec=</varname></term> |
| <listitem> |
| <para>ForwardDelaySec specifies the number of seconds spent in each |
| of the Listening and Learning states before the Forwarding state is entered.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>AgeingTimeSec=</varname></term> |
| <listitem> |
| <para>This specifies the number of seconds a MAC Address will be kept in |
| the forwarding database after having a packet received from this MAC Address.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>Priority=</varname></term> |
| <listitem> |
| <para>The priority of the bridge. An integer between 0 and 65535. A lower value |
| means higher priority. The bridge having the lowest priority will be elected as root bridge.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>DefaultPVID=</varname></term> |
| <listitem> |
| <para>This specifies the default port VLAN ID of a newly attached bridge port. |
| Set this to an integer in the range 1–4094 or <literal>none</literal> to disable the PVID.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>MulticastQuerier=</varname></term> |
| <listitem> |
| <para>A boolean. This setting controls the IFLA_BR_MCAST_QUERIER option in the kernel. |
| If enabled, the kernel will send general ICMP queries from a zero source address. |
| This feature should allow faster convergence on startup, but it causes some |
| multicast-aware switches to misbehave and disrupt forwarding of multicast packets. |
| When unset, the kernel's default setting applies. |
| </para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>MulticastSnooping=</varname></term> |
| <listitem> |
| <para>A boolean. This setting controls the IFLA_BR_MCAST_SNOOPING option in the kernel. |
| If enabled, IGMP snooping monitors the Internet Group Management Protocol (IGMP) traffic |
| between hosts and multicast routers. When unset, the kernel's default setting applies. |
| </para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>VLANFiltering=</varname></term> |
| <listitem> |
| <para>A boolean. This setting controls the IFLA_BR_VLAN_FILTERING option in the kernel. |
| If enabled, the bridge will be started in VLAN-filtering mode. When unset, the kernel's |
| default setting applies. |
| </para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>STP=</varname></term> |
| <listitem> |
| <para>A boolean. This enables the bridge's Spanning Tree Protocol (STP). When unset, |
| the kernel's default setting applies. |
| </para> |
| </listitem> |
| </varlistentry> |
| </variablelist> |
| </refsect1> |
| |
| <refsect1> |
| <title>[VLAN] Section Options</title> |
| |
| <para>The <literal>[VLAN]</literal> section only applies for |
| netdevs of kind <literal>vlan</literal>, and accepts the |
| following key:</para> |
| |
| <variablelist class='network-directives'> |
| <varlistentry> |
| <term><varname>Id=</varname></term> |
| <listitem> |
| <para>The VLAN ID to use. An integer in the range 0–4094. |
| This option is compulsory.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>GVRP=</varname></term> |
| <listitem> |
| <para>The Generic VLAN Registration Protocol (GVRP) is a protocol that |
| allows automatic learning of VLANs on a network. A boolean. When unset, |
| the kernel's default setting applies.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>MVRP=</varname></term> |
| <listitem> |
| <para>Multiple VLAN Registration Protocol (MVRP) formerly known as GARP VLAN |
| Registration Protocol (GVRP) is a standards-based Layer 2 network protocol, |
| for automatic configuration of VLAN information on switches. It was defined |
| in the 802.1ak amendment to 802.1Q-2005. A boolean. When unset, the kernel's |
| default setting applies.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>LooseBinding=</varname></term> |
| <listitem> |
| <para>The VLAN loose binding mode, in which only the operational state is passed |
| from the parent to the associated VLANs, but the VLAN device state is not changed. |
| A boolean. When unset, the kernel's default setting applies.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>ReorderHeader=</varname></term> |
| <listitem> |
| <para>The VLAN reorder header is set VLAN interfaces behave like physical interfaces. |
| A boolean. When unset, the kernel's default setting applies.</para> |
| </listitem> |
| </varlistentry> |
| </variablelist> |
| </refsect1> |
| |
| <refsect1> |
| <title>[MACVLAN] Section Options</title> |
| |
| <para>The <literal>[MACVLAN]</literal> section only applies for |
| netdevs of kind <literal>macvlan</literal>, and accepts the |
| following key:</para> |
| |
| <variablelist class='network-directives'> |
| <varlistentry> |
| <term><varname>Mode=</varname></term> |
| <listitem> |
| <para>The MACVLAN mode to use. The supported options are |
| <literal>private</literal>, |
| <literal>vepa</literal>, |
| <literal>bridge</literal>, and |
| <literal>passthru</literal>. |
| </para> |
| </listitem> |
| </varlistentry> |
| </variablelist> |
| |
| </refsect1> |
| |
| <refsect1> |
| <title>[MACVTAP] Section Options</title> |
| |
| <para>The <literal>[MACVTAP]</literal> section applies for |
| netdevs of kind <literal>macvtap</literal> and accepts the |
| same key as <literal>[MACVLAN]</literal>.</para> |
| |
| </refsect1> |
| |
| <refsect1> |
| <title>[IPVLAN] Section Options</title> |
| |
| <para>The <literal>[IPVLAN]</literal> section only applies for |
| netdevs of kind <literal>ipvlan</literal>, and accepts the |
| following key:</para> |
| |
| <variablelist class='network-directives'> |
| <varlistentry> |
| <term><varname>Mode=</varname></term> |
| <listitem> |
| <para>The IPVLAN mode to use. The supported options are |
| <literal>L2</literal> and <literal>L3</literal>. |
| </para> |
| </listitem> |
| </varlistentry> |
| </variablelist> |
| |
| </refsect1> |
| |
| <refsect1> |
| <title>[VXLAN] Section Options</title> |
| <para>The <literal>[VXLAN]</literal> section only applies for |
| netdevs of kind <literal>vxlan</literal>, and accepts the |
| following keys:</para> |
| |
| <variablelist class='network-directives'> |
| <varlistentry> |
| <term><varname>Id=</varname></term> |
| <listitem> |
| <para>The VXLAN ID to use.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>Remote=</varname></term> |
| <listitem> |
| <para>Configures destination IP address.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>Local=</varname></term> |
| <listitem> |
| <para>Configures local IP address.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>TOS=</varname></term> |
| <listitem> |
| <para>The Type Of Service byte value for a vxlan interface.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>TTL=</varname></term> |
| <listitem> |
| <para>A fixed Time To Live N on Virtual eXtensible Local |
| Area Network packets. N is a number in the range 1–255. 0 |
| is a special value meaning that packets inherit the TTL |
| value.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>MacLearning=</varname></term> |
| <listitem> |
| <para>A boolean. When true, enables dynamic MAC learning |
| to discover remote MAC addresses.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>FDBAgeingSec=</varname></term> |
| <listitem> |
| <para>The lifetime of Forwarding Database entry learnt by |
| the kernel, in seconds.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>MaximumFDBEntries=</varname></term> |
| <listitem> |
| <para>Configures maximum number of FDB entries.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>ReduceARPProxy=</varname></term> |
| <listitem> |
| <para>A boolean. When true, bridge-connected VXLAN tunnel |
| endpoint answers ARP requests from the local bridge on behalf |
| of remote Distributed Overlay Virtual Ethernet |
| <ulink url="https://en.wikipedia.org/wiki/Distributed_Overlay_Virtual_Ethernet"> |
| (DVOE)</ulink> clients. Defaults to false.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>L2MissNotification=</varname></term> |
| <listitem> |
| <para>A boolean. When true, enables netlink LLADDR miss |
| notifications.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>L3MissNotification=</varname></term> |
| <listitem> |
| <para>A boolean. When true, enables netlink IP address miss |
| notifications.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>RouteShortCircuit=</varname></term> |
| <listitem> |
| <para>A boolean. When true, route short circuiting is turned |
| on.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>UDPChecksum=</varname></term> |
| <listitem> |
| <para>A boolean. When true, transmitting UDP checksums when doing VXLAN/IPv4 is turned on.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>UDP6ZeroChecksumTx=</varname></term> |
| <listitem> |
| <para>A boolean. When true, sending zero checksums in VXLAN/IPv6 is turned on.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>UDP6ZeroChecksumRx=</varname></term> |
| <listitem> |
| <para>A boolean. When true, receiving zero checksums in VXLAN/IPv6 is turned on.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>RemoteChecksumTx=</varname></term> |
| <listitem> |
| <para>A boolean. When true, remote transmit checksum offload of VXLAN is turned on.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>RemoteChecksumRx=</varname></term> |
| <listitem> |
| <para>A boolean. When true, remote receive checksum offload in VXLAN is turned on.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>GroupPolicyExtension=</varname></term> |
| <listitem> |
| <para>A boolean. When true, it enables Group Policy VXLAN extension security label mechanism |
| across network peers based on VXLAN. For details about the Group Policy VXLAN, see the |
| <ulink url="https://tools.ietf.org/html/draft-smith-vxlan-group-policy"> |
| VXLAN Group Policy </ulink> document. Defaults to false.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>DestinationPort=</varname></term> |
| <listitem> |
| <para>Configures the default destination UDP port on a per-device basis. |
| If destination port is not specified then Linux kernel default will be used. |
| Set destination port 4789 to get the IANA assigned value. If not set or if the |
| destination port is assigned the empty string the default port of 4789 is used.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>PortRange=</varname></term> |
| <listitem> |
| <para>Configures VXLAN port range. VXLAN bases source |
| UDP port based on flow to help the receiver to be able |
| to load balance based on outer header flow. It |
| restricts the port range to the normal UDP local |
| ports, and allows overriding via configuration.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>FlowLabel=</varname></term> |
| <listitem> |
| <para>Specifies the flow label to use in outgoing packets. |
| The valid range is 0-1048575. |
| </para> |
| </listitem> |
| </varlistentry> |
| </variablelist> |
| </refsect1> |
| <refsect1> |
| <title>[GENEVE] Section Options</title> |
| <para>The <literal>[GENEVE]</literal> section only applies for |
| netdevs of kind <literal>geneve</literal>, and accepts the |
| following keys:</para> |
| |
| <variablelist class='network-directives'> |
| <varlistentry> |
| <term><varname>Id=</varname></term> |
| <listitem> |
| <para>Specifies the Virtual Network Identifer (VNI) to use. Ranges [0-16777215].</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>Remote=</varname></term> |
| <listitem> |
| <para>Specifies the unicast destination IP address to use in outgoing packets.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>TOS=</varname></term> |
| <listitem> |
| <para>Specifies the TOS value to use in outgoing packets. Ranges [1-255].</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>TTL=</varname></term> |
| <listitem> |
| <para>Specifies the TTL value to use in outgoing packets. Ranges [1-255].</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>UDPChecksum=</varname></term> |
| <listitem> |
| <para>A boolean. When true, specifies if UDP checksum is calculated for transmitted packets over IPv4.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>UDP6ZeroChecksumTx=</varname></term> |
| <listitem> |
| <para>A boolean. When true, skip UDP checksum calculation for transmitted packets over IPv6.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>UDP6ZeroChecksumRx=</varname></term> |
| <listitem> |
| <para>A boolean. When true, allows incoming UDP packets over IPv6 with zero checksum field.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>DestinationPort=</varname></term> |
| <listitem> |
| <para>Specifies destination port. Defaults to 6081. If not set or assigned the empty string, the default |
| port of 6081 is used.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>FlowLabel=</varname></term> |
| <listitem> |
| <para>Specifies the flow label to use in outgoing packets.</para> |
| </listitem> |
| </varlistentry> |
| </variablelist> |
| </refsect1> |
| <refsect1> |
| <title>[Tunnel] Section Options</title> |
| |
| <para>The <literal>[Tunnel]</literal> section only applies for |
| netdevs of kind |
| <literal>ipip</literal>, |
| <literal>sit</literal>, |
| <literal>gre</literal>, |
| <literal>gretap</literal>, |
| <literal>ip6gre</literal>, |
| <literal>ip6gretap</literal>, |
| <literal>vti</literal>, |
| <literal>vti6</literal>, and |
| <literal>ip6tnl</literal> and accepts |
| the following keys:</para> |
| |
| <variablelist class='network-directives'> |
| <varlistentry> |
| <term><varname>Local=</varname></term> |
| <listitem> |
| <para>A static local address for tunneled packets. It must |
| be an address on another interface of this host.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>Remote=</varname></term> |
| <listitem> |
| <para>The remote endpoint of the tunnel.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>TOS=</varname></term> |
| <listitem> |
| <para>The Type Of Service byte value for a tunnel interface. |
| For details about the TOS, see the |
| <ulink url="http://tools.ietf.org/html/rfc1349"> Type of |
| Service in the Internet Protocol Suite </ulink> document. |
| </para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>TTL=</varname></term> |
| <listitem> |
| <para>A fixed Time To Live N on tunneled packets. N is a |
| number in the range 1–255. 0 is a special value meaning that |
| packets inherit the TTL value. The default value for IPv4 |
| tunnels is: inherit. The default value for IPv6 tunnels is |
| 64.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>DiscoverPathMTU=</varname></term> |
| <listitem> |
| <para>A boolean. When true, enables Path MTU Discovery on |
| the tunnel.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>IPv6FlowLabel=</varname></term> |
| <listitem> |
| <para>Configures the 20-bit flow label (see <ulink url="https://tools.ietf.org/html/rfc6437"> |
| RFC 6437</ulink>) field in the IPv6 header (see <ulink url="https://tools.ietf.org/html/rfc2460"> |
| RFC 2460</ulink>), which is used by a node to label packets of a flow. |
| It is only used for IPv6 tunnels. |
| A flow label of zero is used to indicate packets that have |
| not been labeled. |
| It can be configured to a value in the range 0–0xFFFFF, or be |
| set to <literal>inherit</literal>, in which case the original flowlabel is used.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>CopyDSCP=</varname></term> |
| <listitem> |
| <para>A boolean. When true, the Differentiated Service Code |
| Point (DSCP) field will be copied to the inner header from |
| outer header during the decapsulation of an IPv6 tunnel |
| packet. DSCP is a field in an IP packet that enables different |
| levels of service to be assigned to network traffic. |
| Defaults to <literal>no</literal>. |
| </para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>EncapsulationLimit=</varname></term> |
| <listitem> |
| <para>The Tunnel Encapsulation Limit option specifies how many additional |
| levels of encapsulation are permitted to be prepended to the packet. |
| For example, a Tunnel Encapsulation Limit option containing a limit |
| value of zero means that a packet carrying that option may not enter |
| another tunnel before exiting the current tunnel. |
| (see <ulink url="https://tools.ietf.org/html/rfc2473#section-4.1.1"> RFC 2473</ulink>). |
| The valid range is 0–255 and <literal>none</literal>. Defaults to 4. |
| </para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>Key=</varname></term> |
| <listitem> |
| <para>The <varname>Key=</varname> parameter specifies the same key to use in |
| both directions (<varname>InputKey=</varname> and <varname>OutputKey=</varname>). |
| The <varname>Key=</varname> is either a number or an IPv4 address-like dotted quad. |
| It is used as mark-configured SAD/SPD entry as part of the lookup key (both in data |
| and control path) in ip xfrm (framework used to implement IPsec protocol). |
| See <ulink url="http://man7.org/linux/man-pages/man8/ip-xfrm.8.html"> |
| ip-xfrm — transform configuration</ulink> for details. It is only used for VTI/VTI6 |
| tunnels.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>InputKey=</varname></term> |
| <listitem> |
| <para>The <varname>InputKey=</varname> parameter specifies the key to use for input. |
| The format is same as <varname>Key=</varname>. It is only used for VTI/VTI6 tunnels.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>OutputKey=</varname></term> |
| <listitem> |
| <para>The <varname>OutputKey=</varname> parameter specifies the key to use for output. |
| The format is same as <varname>Key=</varname>. It is only used for VTI/VTI6 tunnels.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>Mode=</varname></term> |
| <listitem> |
| <para>An <literal>ip6tnl</literal> tunnel can be in one of three |
| modes |
| <literal>ip6ip6</literal> for IPv6 over IPv6, |
| <literal>ipip6</literal> for IPv4 over IPv6 or |
| <literal>any</literal> for either. |
| </para> |
| </listitem> |
| </varlistentry> |
| </variablelist> |
| </refsect1> |
| <refsect1> |
| <title>[Peer] Section Options</title> |
| |
| <para>The <literal>[Peer]</literal> section only applies for |
| netdevs of kind <literal>veth</literal> and accepts the |
| following keys:</para> |
| |
| <variablelist class='network-directives'> |
| <varlistentry> |
| <term><varname>Name=</varname></term> |
| <listitem> |
| <para>The interface name used when creating the netdev. |
| This option is compulsory.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>MACAddress=</varname></term> |
| <listitem> |
| <para>The peer MACAddress, if not set, it is generated in |
| the same way as the MAC address of the main |
| interface.</para> |
| </listitem> |
| </varlistentry> |
| </variablelist> |
| </refsect1> |
| <refsect1> |
| <title>[Tun] Section Options</title> |
| |
| <para>The <literal>[Tun]</literal> section only applies for |
| netdevs of kind <literal>tun</literal>, and accepts the following |
| keys:</para> |
| |
| <variablelist class='network-directives'> |
| <varlistentry> |
| <term><varname>OneQueue=</varname></term> |
| <listitem><para>Takes a boolean argument. Configures whether |
| all packets are queued at the device (enabled), or a fixed |
| number of packets are queued at the device and the rest at the |
| <literal>qdisc</literal>. Defaults to |
| <literal>no</literal>.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>MultiQueue=</varname></term> |
| <listitem><para>Takes a boolean argument. Configures whether |
| to use multiple file descriptors (queues) to parallelize |
| packets sending and receiving. Defaults to |
| <literal>no</literal>.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>PacketInfo=</varname></term> |
| <listitem><para>Takes a boolean argument. Configures whether |
| packets should be prepended with four extra bytes (two flag |
| bytes and two protocol bytes). If disabled, it indicates that |
| the packets will be pure IP packets. Defaults to |
| <literal>no</literal>.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>VNetHeader=</varname></term> |
| <listitem><para>Takes a boolean argument. Configures |
| IFF_VNET_HDR flag for a tap device. It allows sending |
| and receiving larger Generic Segmentation Offload (GSO) |
| packets. This may increase throughput significantly. |
| Defaults to |
| <literal>no</literal>.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>User=</varname></term> |
| <listitem><para>User to grant access to the |
| <filename>/dev/net/tun</filename> device.</para> |
| </listitem> |
| </varlistentry> |
| <varlistentry> |
| <term><varname>Group=</varname></term> |
| <listitem><para>Group to grant access to the |
| <filename>/dev/net/tun</filename> device.</para> |
| </listitem> |
| </varlistentry> |
| |
| </variablelist> |
| |
| </refsect1> |
| |
| <refsect1> |
| <title>[Tap] Section Options</title> |
| |
| <para>The <literal>[Tap]</literal> section only applies for |
| netdevs of kind <literal>tap</literal>, and accepts the same keys |
| as the <literal>[Tun]</literal> section.</para> |
| </refsect1> |
| |
| <refsect1> |
| <title>[Bond] Section Options</title> |
| |
| <para>The <literal>[Bond]</literal> section accepts the following |
| key:</para> |
| |
| <variablelist class='network-directives'> |
| <varlistentry> |
| <term><varname>Mode=</varname></term> |
| <listitem> |
| <para>Specifies one of the bonding policies. The default is |
| <literal>balance-rr</literal> (round robin). Possible values are |
| <literal>balance-rr</literal>, |
| <literal>active-backup</literal>, |
| <literal>balance-xor</literal>, |
| <literal>broadcast</literal>, |
| <literal>802.3ad</literal>, |
| <literal>balance-tlb</literal>, and |
| <literal>balance-alb</literal>. |
| </para> |
| </listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>TransmitHashPolicy=</varname></term> |
| <listitem> |
| <para>Selects the transmit hash policy to use for slave |
| selection in balance-xor, 802.3ad, and tlb modes. Possible |
| values are |
| <literal>layer2</literal>, |
| <literal>layer3+4</literal>, |
| <literal>layer2+3</literal>, |
| <literal>encap2+3</literal>, and |
| <literal>encap3+4</literal>. |
| </para> |
| </listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>LACPTransmitRate=</varname></term> |
| <listitem> |
| <para>Specifies the rate with which link partner transmits |
| Link Aggregation Control Protocol Data Unit packets in |
| 802.3ad mode. Possible values are <literal>slow</literal>, |
| which requests partner to transmit LACPDUs every 30 seconds, |
| and <literal>fast</literal>, which requests partner to |
| transmit LACPDUs every second. The default value is |
| <literal>slow</literal>.</para> |
| </listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>MIIMonitorSec=</varname></term> |
| <listitem> |
| <para>Specifies the frequency that Media Independent |
| Interface link monitoring will occur. A value of zero |
| disables MII link monitoring. This value is rounded down to |
| the nearest millisecond. The default value is 0.</para> |
| </listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>UpDelaySec=</varname></term> |
| <listitem> |
| <para>Specifies the delay before a link is enabled after a |
| link up status has been detected. This value is rounded down |
| to a multiple of MIIMonitorSec. The default value is |
| 0.</para> |
| </listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>DownDelaySec=</varname></term> |
| <listitem> |
| <para>Specifies the delay before a link is disabled after a |
| link down status has been detected. This value is rounded |
| down to a multiple of MIIMonitorSec. The default value is |
| 0.</para> |
| </listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>LearnPacketIntervalSec=</varname></term> |
| <listitem> |
| <para>Specifies the number of seconds between instances where the bonding |
| driver sends learning packets to each slave peer switch. |
| The valid range is 1–0x7fffffff; the default value is 1. This option |
| has an effect only for the balance-tlb and balance-alb modes.</para> |
| </listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>AdSelect=</varname></term> |
| <listitem> |
| <para>Specifies the 802.3ad aggregation selection logic to use. Possible values are |
| <literal>stable</literal>, |
| <literal>bandwidth</literal> and |
| <literal>count</literal>. |
| </para> |
| </listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>FailOverMACPolicy=</varname></term> |
| <listitem> |
| <para>Specifies whether the active-backup mode should set all slaves to |
| the same MAC address at the time of enslavement or, when enabled, to perform special handling of the |
| bond's MAC address in accordance with the selected policy. The default policy is none. |
| Possible values are |
| <literal>none</literal>, |
| <literal>active</literal> and |
| <literal>follow</literal>. |
| </para> |
| </listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>ARPValidate=</varname></term> |
| <listitem> |
| <para>Specifies whether or not ARP probes and replies should be |
| validated in any mode that supports ARP monitoring, or whether |
| non-ARP traffic should be filtered (disregarded) for link |
| monitoring purposes. Possible values are |
| <literal>none</literal>, |
| <literal>active</literal>, |
| <literal>backup</literal> and |
| <literal>all</literal>. |
| </para> |
| </listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>ARPIntervalSec=</varname></term> |
| <listitem> |
| <para>Specifies the ARP link monitoring frequency in milliseconds. |
| A value of 0 disables ARP monitoring. The default value is 0. |
| </para> |
| </listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>ARPIPTargets=</varname></term> |
| <listitem> |
| <para>Specifies the IP addresses to use as ARP monitoring peers when |
| ARPIntervalSec is greater than 0. These are the targets of the ARP request |
| sent to determine the health of the link to the targets. |
| Specify these values in IPv4 dotted decimal format. At least one IP |
| address must be given for ARP monitoring to function. The |
| maximum number of targets that can be specified is 16. The |
| default value is no IP addresses. |
| </para> |
| </listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>ARPAllTargets=</varname></term> |
| <listitem> |
| <para>Specifies the quantity of ARPIPTargets that must be reachable |
| in order for the ARP monitor to consider a slave as being up. |
| This option affects only active-backup mode for slaves with |
| ARPValidate enabled. Possible values are |
| <literal>any</literal> and |
| <literal>all</literal>. |
| </para> |
| </listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>PrimaryReselectPolicy=</varname></term> |
| <listitem> |
| <para>Specifies the reselection policy for the primary slave. This |
| affects how the primary slave is chosen to become the active slave |
| when failure of the active slave or recovery of the primary slave |
| occurs. This option is designed to prevent flip-flopping between |
| the primary slave and other slaves. Possible values are |
| <literal>always</literal>, |
| <literal>better</literal> and |
| <literal>failure</literal>. |
| </para> |
| </listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>ResendIGMP=</varname></term> |
| <listitem> |
| <para>Specifies the number of IGMP membership reports to be issued after |
| a failover event. One membership report is issued immediately after |
| the failover, subsequent packets are sent in each 200ms interval. |
| The valid range is 0–255. Defaults to 1. A value of 0 |
| prevents the IGMP membership report from being issued in response |
| to the failover event. |
| </para> |
| </listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>PacketsPerSlave=</varname></term> |
| <listitem> |
| <para>Specify the number of packets to transmit through a slave before |
| moving to the next one. When set to 0, then a slave is chosen at |
| random. The valid range is 0–65535. Defaults to 1. This option |
| only has effect when in balance-rr mode. |
| </para> |
| </listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>GratuitousARP=</varname></term> |
| <listitem> |
| <para>Specify the number of peer notifications (gratuitous ARPs and |
| unsolicited IPv6 Neighbor Advertisements) to be issued after a |
| failover event. As soon as the link is up on the new slave, |
| a peer notification is sent on the bonding device and each |
| VLAN sub-device. This is repeated at each link monitor interval |
| (ARPIntervalSec or MIIMonitorSec, whichever is active) if the number is |
| greater than 1. The valid range is 0–255. The default value is 1. |
| These options affect only the active-backup mode. |
| </para> |
| </listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>AllSlavesActive=</varname></term> |
| <listitem> |
| <para>A boolean. Specifies that duplicate frames (received on inactive ports) |
| should be dropped when false, or delivered when true. Normally, bonding will drop |
| duplicate frames (received on inactive ports), which is desirable for |
| most users. But there are some times it is nice to allow duplicate |
| frames to be delivered. The default value is false (drop duplicate frames |
| received on inactive ports). |
| </para> |
| </listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>MinLinks=</varname></term> |
| <listitem> |
| <para>Specifies the minimum number of links that must be active before |
| asserting carrier. The default value is 0. |
| </para> |
| </listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>ActiveSlave=</varname></term> |
| <listitem> |
| <para>A boolean. Specifies the new active slave. The <literal>ActiveSlave=</literal> |
| option is only valid for following modes: |
| <literal>active-backup</literal>, |
| <literal>balance-alb</literal> and |
| <literal>balance-tlb</literal>. Defaults to false. |
| </para> |
| </listitem> |
| </varlistentry> |
| |
| <varlistentry> |
| <term><varname>PrimarySlave=</varname></term> |
| <listitem> |
| <para>A boolean. Specifies which slave is the primary device. The specified |
| device will always be the active slave while it is available. Only when the |
| primary is off-line will alternate devices be used. This is useful when |
| one slave is preferred over another, e.g. when one slave has higher throughput |
| than another. The <literal>PrimarySlave=</literal> option is only valid for |
| following modes: |
| <literal>active-backup</literal>, |
| <literal>balance-alb</literal> and |
| <literal>balance-tlb</literal>. Defaults to false. |
| </para> |
| </listitem> |
| </varlistentry> |
| </variablelist> |
| |
| <para>For more detail information see |
| <ulink url="https://www.kernel.org/doc/Documentation/networking/bonding.txt"> |
| Linux Ethernet Bonding Driver HOWTO</ulink></para> |
| |
| </refsect1> |
| |
| <refsect1> |
| <title>Example</title> |
| <example> |
| <title>/etc/systemd/network/25-bridge.netdev</title> |
| |
| <programlisting>[NetDev] |
| Name=bridge0 |
| Kind=bridge</programlisting> |
| </example> |
| |
| <example> |
| <title>/etc/systemd/network/25-vlan1.netdev</title> |
| |
| <programlisting>[Match] |
| Virtualization=no |
| |
| [NetDev] |
| Name=vlan1 |
| Kind=vlan |
| |
| [VLAN] |
| Id=1</programlisting> |
| </example> |
| <example> |
| <title>/etc/systemd/network/25-ipip.netdev</title> |
| <programlisting>[NetDev] |
| Name=ipip-tun |
| Kind=ipip |
| MTUBytes=1480 |
| |
| [Tunnel] |
| Local=192.168.223.238 |
| Remote=192.169.224.239 |
| TTL=64</programlisting> |
| </example> |
| <example> |
| <title>/etc/systemd/network/25-tap.netdev</title> |
| <programlisting>[NetDev] |
| Name=tap-test |
| Kind=tap |
| |
| [Tap] |
| MultiQueue=true |
| PacketInfo=true</programlisting> </example> |
| |
| <example> |
| <title>/etc/systemd/network/25-sit.netdev</title> |
| <programlisting>[NetDev] |
| Name=sit-tun |
| Kind=sit |
| MTUBytes=1480 |
| |
| [Tunnel] |
| Local=10.65.223.238 |
| Remote=10.65.223.239</programlisting> |
| </example> |
| |
| <example> |
| <title>/etc/systemd/network/25-gre.netdev</title> |
| <programlisting>[NetDev] |
| Name=gre-tun |
| Kind=gre |
| MTUBytes=1480 |
| |
| [Tunnel] |
| Local=10.65.223.238 |
| Remote=10.65.223.239</programlisting> |
| </example> |
| |
| <example> |
| <title>/etc/systemd/network/25-vti.netdev</title> |
| |
| <programlisting>[NetDev] |
| Name=vti-tun |
| Kind=vti |
| MTUBytes=1480 |
| |
| [Tunnel] |
| Local=10.65.223.238 |
| Remote=10.65.223.239</programlisting> |
| </example> |
| |
| <example> |
| <title>/etc/systemd/network/25-veth.netdev</title> |
| <programlisting>[NetDev] |
| Name=veth-test |
| Kind=veth |
| |
| [Peer] |
| Name=veth-peer</programlisting> |
| </example> |
| |
| <example> |
| <title>/etc/systemd/network/25-bond.netdev</title> |
| <programlisting>[NetDev] |
| Name=bond1 |
| Kind=bond |
| |
| [Bond] |
| Mode=802.3ad |
| TransmitHashPolicy=layer3+4 |
| MIIMonitorSec=1s |
| LACPTransmitRate=fast |
| </programlisting> |
| </example> |
| |
| <example> |
| <title>/etc/systemd/network/25-dummy.netdev</title> |
| <programlisting>[NetDev] |
| Name=dummy-test |
| Kind=dummy |
| MACAddress=12:34:56:78:9a:bc</programlisting> |
| </example> |
| <example> |
| <title>/etc/systemd/network/25-vrf.netdev</title> |
| <para>Create a VRF interface with table 42.</para> |
| <programlisting>[NetDev] |
| Name=vrf-test |
| Kind=vrf |
| |
| [VRF] |
| TableId=42</programlisting> |
| </example> |
| |
| <example> |
| <title>/etc/systemd/network/25-macvtap.netdev</title> |
| <para>Create a MacVTap device.</para> |
| <programlisting>[NetDev] |
| Name=macvtap-test |
| Kind=macvtap |
| </programlisting> |
| </example> |
| </refsect1> |
| <refsect1> |
| <title>See Also</title> |
| <para> |
| <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, |
| <citerefentry><refentrytitle>systemd-networkd</refentrytitle><manvolnum>8</manvolnum></citerefentry>, |
| <citerefentry><refentrytitle>systemd.link</refentrytitle><manvolnum>5</manvolnum></citerefentry>, |
| <citerefentry><refentrytitle>systemd.network</refentrytitle><manvolnum>5</manvolnum></citerefentry> |
| </para> |
| </refsect1> |
| |
| </refentry> |