blob: a737f4b46b358723037c4137565747078e7ed725 [file] [log] [blame] [raw]
/*
* Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
* All rights reserved
*
* As far as I am concerned, the code I have written for this software
* can be used freely for any purpose. Any derived versions of this
* software must be clearly marked as such, and if the derived work is
* incompatible with the protocol description in the RFC file, it must be
* called by a name other than "ssh" or "Secure Shell".
*/
#include "includes.h"
RCSID("$OpenBSD: servconf.c,v 1.121 2003/05/15 14:02:47 jakob Exp $");
#if defined(KRB4)
#include <krb.h>
#endif
#if defined(KRB5)
# ifdef HEIMDAL
# include <krb.h>
# else
/*
* XXX: Bodge - but then, so is using the kerberos IV KEYFILE to get a
* Kerberos V keytab
*/
# define KEYFILE "/etc/krb5.keytab"
# endif
#endif
#ifdef AFS
#include <kafs.h>
#endif
#include "ssh.h"
#include "log.h"
#include "servconf.h"
#include "xmalloc.h"
#include "compat.h"
#include "pathnames.h"
#include "tildexpand.h"
#include "misc.h"
#include "cipher.h"
#include "kex.h"
#include "mac.h"
static void add_listen_addr(ServerOptions *, char *, u_short);
static void add_one_listen_addr(ServerOptions *, char *, u_short);
/* AF_UNSPEC or AF_INET or AF_INET6 */
extern int IPv4or6;
/* Use of privilege separation or not */
extern int use_privsep;
/* Initializes the server options to their default values. */
void
initialize_server_options(ServerOptions *options)
{
memset(options, 0, sizeof(*options));
/* Portable-specific options */
options->use_pam = -1;
/* Standard Options */
options->num_ports = 0;
options->ports_from_cmdline = 0;
options->listen_addrs = NULL;
options->num_host_key_files = 0;
options->pid_file = NULL;
options->server_key_bits = -1;
options->login_grace_time = -1;
options->key_regeneration_time = -1;
options->permit_root_login = PERMIT_NOT_SET;
options->ignore_rhosts = -1;
options->ignore_user_known_hosts = -1;
options->print_motd = -1;
options->print_lastlog = -1;
options->x11_forwarding = -1;
options->x11_display_offset = -1;
options->x11_use_localhost = -1;
options->xauth_location = NULL;
options->strict_modes = -1;
options->keepalives = -1;
options->log_facility = SYSLOG_FACILITY_NOT_SET;
options->log_level = SYSLOG_LEVEL_NOT_SET;
options->rhosts_authentication = -1;
options->rhosts_rsa_authentication = -1;
options->hostbased_authentication = -1;
options->hostbased_uses_name_from_packet_only = -1;
options->rsa_authentication = -1;
options->pubkey_authentication = -1;
options->kerberos_authentication = -1;
options->kerberos_or_local_passwd = -1;
options->kerberos_ticket_cleanup = -1;
options->kerberos_tgt_passing = -1;
options->afs_token_passing = -1;
options->password_authentication = -1;
options->kbd_interactive_authentication = -1;
options->challenge_response_authentication = -1;
options->permit_empty_passwd = -1;
options->permit_user_env = -1;
options->use_login = -1;
options->compression = -1;
options->allow_tcp_forwarding = -1;
options->num_allow_users = 0;
options->num_deny_users = 0;
options->num_allow_groups = 0;
options->num_deny_groups = 0;
options->ciphers = NULL;
options->macs = NULL;
options->protocol = SSH_PROTO_UNKNOWN;
options->gateway_ports = -1;
options->num_subsystems = 0;
options->max_startups_begin = -1;
options->max_startups_rate = -1;
options->max_startups = -1;
options->banner = NULL;
options->verify_reverse_mapping = -1;
options->client_alive_interval = -1;
options->client_alive_count_max = -1;
options->authorized_keys_file = NULL;
options->authorized_keys_file2 = NULL;
/* Needs to be accessable in many places */
use_privsep = -1;
}
void
fill_default_server_options(ServerOptions *options)
{
/* Portable-specific options */
if (options->use_pam == -1)
options->use_pam = 1;
/* Standard Options */
if (options->protocol == SSH_PROTO_UNKNOWN)
options->protocol = SSH_PROTO_1|SSH_PROTO_2;
if (options->num_host_key_files == 0) {
/* fill default hostkeys for protocols */
if (options->protocol & SSH_PROTO_1)
options->host_key_files[options->num_host_key_files++] =
_PATH_HOST_KEY_FILE;
if (options->protocol & SSH_PROTO_2) {
options->host_key_files[options->num_host_key_files++] =
_PATH_HOST_RSA_KEY_FILE;
options->host_key_files[options->num_host_key_files++] =
_PATH_HOST_DSA_KEY_FILE;
}
}
if (options->num_ports == 0)
options->ports[options->num_ports++] = SSH_DEFAULT_PORT;
if (options->listen_addrs == NULL)
add_listen_addr(options, NULL, 0);
if (options->pid_file == NULL)
options->pid_file = _PATH_SSH_DAEMON_PID_FILE;
if (options->server_key_bits == -1)
options->server_key_bits = 768;
if (options->login_grace_time == -1)
options->login_grace_time = 120;
if (options->key_regeneration_time == -1)
options->key_regeneration_time = 3600;
if (options->permit_root_login == PERMIT_NOT_SET)
options->permit_root_login = PERMIT_YES;
if (options->ignore_rhosts == -1)
options->ignore_rhosts = 1;
if (options->ignore_user_known_hosts == -1)
options->ignore_user_known_hosts = 0;
if (options->print_motd == -1)
options->print_motd = 1;
if (options->print_lastlog == -1)
options->print_lastlog = 1;
if (options->x11_forwarding == -1)
options->x11_forwarding = 0;
if (options->x11_display_offset == -1)
options->x11_display_offset = 10;
if (options->x11_use_localhost == -1)
options->x11_use_localhost = 1;
if (options->xauth_location == NULL)
options->xauth_location = _PATH_XAUTH;
if (options->strict_modes == -1)
options->strict_modes = 1;
if (options->keepalives == -1)
options->keepalives = 1;
if (options->log_facility == SYSLOG_FACILITY_NOT_SET)
options->log_facility = SYSLOG_FACILITY_AUTH;
if (options->log_level == SYSLOG_LEVEL_NOT_SET)
options->log_level = SYSLOG_LEVEL_INFO;
if (options->rhosts_authentication == -1)
options->rhosts_authentication = 0;
if (options->rhosts_rsa_authentication == -1)
options->rhosts_rsa_authentication = 0;
if (options->hostbased_authentication == -1)
options->hostbased_authentication = 0;
if (options->hostbased_uses_name_from_packet_only == -1)
options->hostbased_uses_name_from_packet_only = 0;
if (options->rsa_authentication == -1)
options->rsa_authentication = 1;
if (options->pubkey_authentication == -1)
options->pubkey_authentication = 1;
if (options->kerberos_authentication == -1)
options->kerberos_authentication = 0;
if (options->kerberos_or_local_passwd == -1)
options->kerberos_or_local_passwd = 1;
if (options->kerberos_ticket_cleanup == -1)
options->kerberos_ticket_cleanup = 1;
if (options->kerberos_tgt_passing == -1)
options->kerberos_tgt_passing = 0;
if (options->afs_token_passing == -1)
options->afs_token_passing = 0;
if (options->password_authentication == -1)
options->password_authentication = 1;
if (options->kbd_interactive_authentication == -1)
options->kbd_interactive_authentication = 0;
if (options->challenge_response_authentication == -1)
options->challenge_response_authentication = 1;
if (options->permit_empty_passwd == -1)
options->permit_empty_passwd = 0;
if (options->permit_user_env == -1)
options->permit_user_env = 0;
if (options->use_login == -1)
options->use_login = 0;
if (options->compression == -1)
options->compression = 1;
if (options->allow_tcp_forwarding == -1)
options->allow_tcp_forwarding = 1;
if (options->gateway_ports == -1)
options->gateway_ports = 0;
if (options->max_startups == -1)
options->max_startups = 10;
if (options->max_startups_rate == -1)
options->max_startups_rate = 100; /* 100% */
if (options->max_startups_begin == -1)
options->max_startups_begin = options->max_startups;
if (options->verify_reverse_mapping == -1)
options->verify_reverse_mapping = 0;
if (options->client_alive_interval == -1)
options->client_alive_interval = 0;
if (options->client_alive_count_max == -1)
options->client_alive_count_max = 3;
if (options->authorized_keys_file2 == NULL) {
/* authorized_keys_file2 falls back to authorized_keys_file */
if (options->authorized_keys_file != NULL)
options->authorized_keys_file2 = options->authorized_keys_file;
else
options->authorized_keys_file2 = _PATH_SSH_USER_PERMITTED_KEYS2;
}
if (options->authorized_keys_file == NULL)
options->authorized_keys_file = _PATH_SSH_USER_PERMITTED_KEYS;
/* Turn privilege separation on by default */
if (use_privsep == -1)
use_privsep = 1;
#ifndef HAVE_MMAP
if (use_privsep && options->compression == 1) {
error("This platform does not support both privilege "
"separation and compression");
error("Compression disabled");
options->compression = 0;
}
#endif
}
/* Keyword tokens. */
typedef enum {
sBadOption, /* == unknown option */
/* Portable-specific options */
sUsePAM,
/* Standard Options */
sPort, sHostKeyFile, sServerKeyBits, sLoginGraceTime, sKeyRegenerationTime,
sPermitRootLogin, sLogFacility, sLogLevel,
sRhostsAuthentication, sRhostsRSAAuthentication, sRSAAuthentication,
sKerberosAuthentication, sKerberosOrLocalPasswd, sKerberosTicketCleanup,
sKerberosTgtPassing, sAFSTokenPassing, sChallengeResponseAuthentication,
sPasswordAuthentication, sKbdInteractiveAuthentication, sListenAddress,
sPrintMotd, sPrintLastLog, sIgnoreRhosts,
sX11Forwarding, sX11DisplayOffset, sX11UseLocalhost,
sStrictModes, sEmptyPasswd, sKeepAlives,
sPermitUserEnvironment, sUseLogin, sAllowTcpForwarding, sCompression,
sAllowUsers, sDenyUsers, sAllowGroups, sDenyGroups,
sIgnoreUserKnownHosts, sCiphers, sMacs, sProtocol, sPidFile,
sGatewayPorts, sPubkeyAuthentication, sXAuthLocation, sSubsystem, sMaxStartups,
sBanner, sVerifyReverseMapping, sHostbasedAuthentication,
sHostbasedUsesNameFromPacketOnly, sClientAliveInterval,
sClientAliveCountMax, sAuthorizedKeysFile, sAuthorizedKeysFile2,
sUsePrivilegeSeparation,
sDeprecated, sUnsupported
} ServerOpCodes;
/* Textual representation of the tokens. */
static struct {
const char *name;
ServerOpCodes opcode;
} keywords[] = {
/* Portable-specific options */
#ifdef USE_PAM
{ "UsePAM", sUsePAM },
#else
{ "UsePAM", sUnsupported },
#endif
/* Standard Options */
{ "port", sPort },
{ "hostkey", sHostKeyFile },
{ "hostdsakey", sHostKeyFile }, /* alias */
{ "pidfile", sPidFile },
{ "serverkeybits", sServerKeyBits },
{ "logingracetime", sLoginGraceTime },
{ "keyregenerationinterval", sKeyRegenerationTime },
{ "permitrootlogin", sPermitRootLogin },
{ "syslogfacility", sLogFacility },
{ "loglevel", sLogLevel },
{ "rhostsauthentication", sRhostsAuthentication },
{ "rhostsrsaauthentication", sRhostsRSAAuthentication },
{ "hostbasedauthentication", sHostbasedAuthentication },
{ "hostbasedusesnamefrompacketonly", sHostbasedUsesNameFromPacketOnly },
{ "rsaauthentication", sRSAAuthentication },
{ "pubkeyauthentication", sPubkeyAuthentication },
{ "dsaauthentication", sPubkeyAuthentication }, /* alias */
#if defined(KRB4) || defined(KRB5)
{ "kerberosauthentication", sKerberosAuthentication },
{ "kerberosorlocalpasswd", sKerberosOrLocalPasswd },
{ "kerberosticketcleanup", sKerberosTicketCleanup },
{ "kerberostgtpassing", sKerberosTgtPassing },
#else
{ "kerberosauthentication", sUnsupported },
{ "kerberosorlocalpasswd", sUnsupported },
{ "kerberosticketcleanup", sUnsupported },
{ "kerberostgtpassing", sUnsupported },
#endif
#if defined(AFS)
{ "afstokenpassing", sAFSTokenPassing },
#else
{ "afstokenpassing", sUnsupported },
#endif
{ "passwordauthentication", sPasswordAuthentication },
{ "kbdinteractiveauthentication", sKbdInteractiveAuthentication },
{ "challengeresponseauthentication", sChallengeResponseAuthentication },
{ "skeyauthentication", sChallengeResponseAuthentication }, /* alias */
{ "checkmail", sDeprecated },
{ "listenaddress", sListenAddress },
{ "printmotd", sPrintMotd },
{ "printlastlog", sPrintLastLog },
{ "ignorerhosts", sIgnoreRhosts },
{ "ignoreuserknownhosts", sIgnoreUserKnownHosts },
{ "x11forwarding", sX11Forwarding },
{ "x11displayoffset", sX11DisplayOffset },
{ "x11uselocalhost", sX11UseLocalhost },
{ "xauthlocation", sXAuthLocation },
{ "strictmodes", sStrictModes },
{ "permitemptypasswords", sEmptyPasswd },
{ "permituserenvironment", sPermitUserEnvironment },
{ "uselogin", sUseLogin },
{ "compression", sCompression },
{ "keepalive", sKeepAlives },
{ "allowtcpforwarding", sAllowTcpForwarding },
{ "allowusers", sAllowUsers },
{ "denyusers", sDenyUsers },
{ "allowgroups", sAllowGroups },
{ "denygroups", sDenyGroups },
{ "ciphers", sCiphers },
{ "macs", sMacs },
{ "protocol", sProtocol },
{ "gatewayports", sGatewayPorts },
{ "subsystem", sSubsystem },
{ "maxstartups", sMaxStartups },
{ "banner", sBanner },
{ "verifyreversemapping", sVerifyReverseMapping },
{ "reversemappingcheck", sVerifyReverseMapping },
{ "clientaliveinterval", sClientAliveInterval },
{ "clientalivecountmax", sClientAliveCountMax },
{ "authorizedkeysfile", sAuthorizedKeysFile },
{ "authorizedkeysfile2", sAuthorizedKeysFile2 },
{ "useprivilegeseparation", sUsePrivilegeSeparation},
{ NULL, sBadOption }
};
/*
* Returns the number of the token pointed to by cp or sBadOption.
*/
static ServerOpCodes
parse_token(const char *cp, const char *filename,
int linenum)
{
u_int i;
for (i = 0; keywords[i].name; i++)
if (strcasecmp(cp, keywords[i].name) == 0)
return keywords[i].opcode;
error("%s: line %d: Bad configuration option: %s",
filename, linenum, cp);
return sBadOption;
}
static void
add_listen_addr(ServerOptions *options, char *addr, u_short port)
{
int i;
if (options->num_ports == 0)
options->ports[options->num_ports++] = SSH_DEFAULT_PORT;
if (port == 0)
for (i = 0; i < options->num_ports; i++)
add_one_listen_addr(options, addr, options->ports[i]);
else
add_one_listen_addr(options, addr, port);
}
static void
add_one_listen_addr(ServerOptions *options, char *addr, u_short port)
{
struct addrinfo hints, *ai, *aitop;
char strport[NI_MAXSERV];
int gaierr;
memset(&hints, 0, sizeof(hints));
hints.ai_family = IPv4or6;
hints.ai_socktype = SOCK_STREAM;
hints.ai_flags = (addr == NULL) ? AI_PASSIVE : 0;
snprintf(strport, sizeof strport, "%u", port);
if ((gaierr = getaddrinfo(addr, strport, &hints, &aitop)) != 0)
fatal("bad addr or host: %s (%s)",
addr ? addr : "<NULL>",
gai_strerror(gaierr));
for (ai = aitop; ai->ai_next; ai = ai->ai_next)
;
ai->ai_next = options->listen_addrs;
options->listen_addrs = aitop;
}
int
process_server_config_line(ServerOptions *options, char *line,
const char *filename, int linenum)
{
char *cp, **charptr, *arg, *p;
int *intptr, value, i, n;
ServerOpCodes opcode;
cp = line;
arg = strdelim(&cp);
/* Ignore leading whitespace */
if (*arg == '\0')
arg = strdelim(&cp);
if (!arg || !*arg || *arg == '#')
return 0;
intptr = NULL;
charptr = NULL;
opcode = parse_token(arg, filename, linenum);
switch (opcode) {
/* Portable-specific options */
case sUsePAM:
intptr = &options->use_pam;
goto parse_flag;
/* Standard Options */
case sBadOption:
return -1;
case sPort:
/* ignore ports from configfile if cmdline specifies ports */
if (options->ports_from_cmdline)
return 0;
if (options->listen_addrs != NULL)
fatal("%s line %d: ports must be specified before "
"ListenAddress.", filename, linenum);
if (options->num_ports >= MAX_PORTS)
fatal("%s line %d: too many ports.",
filename, linenum);
arg = strdelim(&cp);
if (!arg || *arg == '\0')
fatal("%s line %d: missing port number.",
filename, linenum);
options->ports[options->num_ports++] = a2port(arg);
if (options->ports[options->num_ports-1] == 0)
fatal("%s line %d: Badly formatted port number.",
filename, linenum);
break;
case sServerKeyBits:
intptr = &options->server_key_bits;
parse_int:
arg = strdelim(&cp);
if (!arg || *arg == '\0')
fatal("%s line %d: missing integer value.",
filename, linenum);
value = atoi(arg);
if (*intptr == -1)
*intptr = value;
break;
case sLoginGraceTime:
intptr = &options->login_grace_time;
parse_time:
arg = strdelim(&cp);
if (!arg || *arg == '\0')
fatal("%s line %d: missing time value.",
filename, linenum);
if ((value = convtime(arg)) == -1)
fatal("%s line %d: invalid time value.",
filename, linenum);
if (*intptr == -1)
*intptr = value;
break;
case sKeyRegenerationTime:
intptr = &options->key_regeneration_time;
goto parse_time;
case sListenAddress:
arg = strdelim(&cp);
if (!arg || *arg == '\0' || strncmp(arg, "[]", 2) == 0)
fatal("%s line %d: missing inet addr.",
filename, linenum);
if (*arg == '[') {
if ((p = strchr(arg, ']')) == NULL)
fatal("%s line %d: bad ipv6 inet addr usage.",
filename, linenum);
arg++;
memmove(p, p+1, strlen(p+1)+1);
} else if (((p = strchr(arg, ':')) == NULL) ||
(strchr(p+1, ':') != NULL)) {
add_listen_addr(options, arg, 0);
break;
}
if (*p == ':') {
u_short port;
p++;
if (*p == '\0')
fatal("%s line %d: bad inet addr:port usage.",
filename, linenum);
else {
*(p-1) = '\0';
if ((port = a2port(p)) == 0)
fatal("%s line %d: bad port number.",
filename, linenum);
add_listen_addr(options, arg, port);
}
} else if (*p == '\0')
add_listen_addr(options, arg, 0);
else
fatal("%s line %d: bad inet addr usage.",
filename, linenum);
break;
case sHostKeyFile:
intptr = &options->num_host_key_files;
if (*intptr >= MAX_HOSTKEYS)
fatal("%s line %d: too many host keys specified (max %d).",
filename, linenum, MAX_HOSTKEYS);
charptr = &options->host_key_files[*intptr];
parse_filename:
arg = strdelim(&cp);
if (!arg || *arg == '\0')
fatal("%s line %d: missing file name.",
filename, linenum);
if (*charptr == NULL) {
*charptr = tilde_expand_filename(arg, getuid());
/* increase optional counter */
if (intptr != NULL)
*intptr = *intptr + 1;
}
break;
case sPidFile:
charptr = &options->pid_file;
goto parse_filename;
case sPermitRootLogin:
intptr = &options->permit_root_login;
arg = strdelim(&cp);
if (!arg || *arg == '\0')
fatal("%s line %d: missing yes/"
"without-password/forced-commands-only/no "
"argument.", filename, linenum);
value = 0; /* silence compiler */
if (strcmp(arg, "without-password") == 0)
value = PERMIT_NO_PASSWD;
else if (strcmp(arg, "forced-commands-only") == 0)
value = PERMIT_FORCED_ONLY;
else if (strcmp(arg, "yes") == 0)
value = PERMIT_YES;
else if (strcmp(arg, "no") == 0)
value = PERMIT_NO;
else
fatal("%s line %d: Bad yes/"
"without-password/forced-commands-only/no "
"argument: %s", filename, linenum, arg);
if (*intptr == -1)
*intptr = value;
break;
case sIgnoreRhosts:
intptr = &options->ignore_rhosts;
parse_flag:
arg = strdelim(&cp);
if (!arg || *arg == '\0')
fatal("%s line %d: missing yes/no argument.",
filename, linenum);
value = 0; /* silence compiler */
if (strcmp(arg, "yes") == 0)
value = 1;
else if (strcmp(arg, "no") == 0)
value = 0;
else
fatal("%s line %d: Bad yes/no argument: %s",
filename, linenum, arg);
if (*intptr == -1)
*intptr = value;
break;
case sIgnoreUserKnownHosts:
intptr = &options->ignore_user_known_hosts;
goto parse_flag;
case sRhostsAuthentication:
intptr = &options->rhosts_authentication;
goto parse_flag;
case sRhostsRSAAuthentication:
intptr = &options->rhosts_rsa_authentication;
goto parse_flag;
case sHostbasedAuthentication:
intptr = &options->hostbased_authentication;
goto parse_flag;
case sHostbasedUsesNameFromPacketOnly:
intptr = &options->hostbased_uses_name_from_packet_only;
goto parse_flag;
case sRSAAuthentication:
intptr = &options->rsa_authentication;
goto parse_flag;
case sPubkeyAuthentication:
intptr = &options->pubkey_authentication;
goto parse_flag;
case sKerberosAuthentication:
intptr = &options->kerberos_authentication;
goto parse_flag;
case sKerberosOrLocalPasswd:
intptr = &options->kerberos_or_local_passwd;
goto parse_flag;
case sKerberosTicketCleanup:
intptr = &options->kerberos_ticket_cleanup;
goto parse_flag;
case sKerberosTgtPassing:
intptr = &options->kerberos_tgt_passing;
goto parse_flag;
case sAFSTokenPassing:
intptr = &options->afs_token_passing;
goto parse_flag;
case sPasswordAuthentication:
intptr = &options->password_authentication;
goto parse_flag;
case sKbdInteractiveAuthentication:
intptr = &options->kbd_interactive_authentication;
goto parse_flag;
case sChallengeResponseAuthentication:
intptr = &options->challenge_response_authentication;
goto parse_flag;
case sPrintMotd:
intptr = &options->print_motd;
goto parse_flag;
case sPrintLastLog:
intptr = &options->print_lastlog;
goto parse_flag;
case sX11Forwarding:
intptr = &options->x11_forwarding;
goto parse_flag;
case sX11DisplayOffset:
intptr = &options->x11_display_offset;
goto parse_int;
case sX11UseLocalhost:
intptr = &options->x11_use_localhost;
goto parse_flag;
case sXAuthLocation:
charptr = &options->xauth_location;
goto parse_filename;
case sStrictModes:
intptr = &options->strict_modes;
goto parse_flag;
case sKeepAlives:
intptr = &options->keepalives;
goto parse_flag;
case sEmptyPasswd:
intptr = &options->permit_empty_passwd;
goto parse_flag;
case sPermitUserEnvironment:
intptr = &options->permit_user_env;
goto parse_flag;
case sUseLogin:
intptr = &options->use_login;
goto parse_flag;
case sCompression:
intptr = &options->compression;
goto parse_flag;
case sGatewayPorts:
intptr = &options->gateway_ports;
goto parse_flag;
case sVerifyReverseMapping:
intptr = &options->verify_reverse_mapping;
goto parse_flag;
case sLogFacility:
intptr = (int *) &options->log_facility;
arg = strdelim(&cp);
value = log_facility_number(arg);
if (value == SYSLOG_FACILITY_NOT_SET)
fatal("%.200s line %d: unsupported log facility '%s'",
filename, linenum, arg ? arg : "<NONE>");
if (*intptr == -1)
*intptr = (SyslogFacility) value;
break;
case sLogLevel:
intptr = (int *) &options->log_level;
arg = strdelim(&cp);
value = log_level_number(arg);
if (value == SYSLOG_LEVEL_NOT_SET)
fatal("%.200s line %d: unsupported log level '%s'",
filename, linenum, arg ? arg : "<NONE>");
if (*intptr == -1)
*intptr = (LogLevel) value;
break;
case sAllowTcpForwarding:
intptr = &options->allow_tcp_forwarding;
goto parse_flag;
case sUsePrivilegeSeparation:
intptr = &use_privsep;
goto parse_flag;
case sAllowUsers:
while ((arg = strdelim(&cp)) && *arg != '\0') {
if (options->num_allow_users >= MAX_ALLOW_USERS)
fatal("%s line %d: too many allow users.",
filename, linenum);
options->allow_users[options->num_allow_users++] =
xstrdup(arg);
}
break;
case sDenyUsers:
while ((arg = strdelim(&cp)) && *arg != '\0') {
if (options->num_deny_users >= MAX_DENY_USERS)
fatal( "%s line %d: too many deny users.",
filename, linenum);
options->deny_users[options->num_deny_users++] =
xstrdup(arg);
}
break;
case sAllowGroups:
while ((arg = strdelim(&cp)) && *arg != '\0') {
if (options->num_allow_groups >= MAX_ALLOW_GROUPS)
fatal("%s line %d: too many allow groups.",
filename, linenum);
options->allow_groups[options->num_allow_groups++] =
xstrdup(arg);
}
break;
case sDenyGroups:
while ((arg = strdelim(&cp)) && *arg != '\0') {
if (options->num_deny_groups >= MAX_DENY_GROUPS)
fatal("%s line %d: too many deny groups.",
filename, linenum);
options->deny_groups[options->num_deny_groups++] = xstrdup(arg);
}
break;
case sCiphers:
arg = strdelim(&cp);
if (!arg || *arg == '\0')
fatal("%s line %d: Missing argument.", filename, linenum);
if (!ciphers_valid(arg))
fatal("%s line %d: Bad SSH2 cipher spec '%s'.",
filename, linenum, arg ? arg : "<NONE>");
if (options->ciphers == NULL)
options->ciphers = xstrdup(arg);
break;
case sMacs:
arg = strdelim(&cp);
if (!arg || *arg == '\0')
fatal("%s line %d: Missing argument.", filename, linenum);
if (!mac_valid(arg))
fatal("%s line %d: Bad SSH2 mac spec '%s'.",
filename, linenum, arg ? arg : "<NONE>");
if (options->macs == NULL)
options->macs = xstrdup(arg);
break;
case sProtocol:
intptr = &options->protocol;
arg = strdelim(&cp);
if (!arg || *arg == '\0')
fatal("%s line %d: Missing argument.", filename, linenum);
value = proto_spec(arg);
if (value == SSH_PROTO_UNKNOWN)
fatal("%s line %d: Bad protocol spec '%s'.",
filename, linenum, arg ? arg : "<NONE>");
if (*intptr == SSH_PROTO_UNKNOWN)
*intptr = value;
break;
case sSubsystem:
if (options->num_subsystems >= MAX_SUBSYSTEMS) {
fatal("%s line %d: too many subsystems defined.",
filename, linenum);
}
arg = strdelim(&cp);
if (!arg || *arg == '\0')
fatal("%s line %d: Missing subsystem name.",
filename, linenum);
for (i = 0; i < options->num_subsystems; i++)
if (strcmp(arg, options->subsystem_name[i]) == 0)
fatal("%s line %d: Subsystem '%s' already defined.",
filename, linenum, arg);
options->subsystem_name[options->num_subsystems] = xstrdup(arg);
arg = strdelim(&cp);
if (!arg || *arg == '\0')
fatal("%s line %d: Missing subsystem command.",
filename, linenum);
options->subsystem_command[options->num_subsystems] = xstrdup(arg);
options->num_subsystems++;
break;
case sMaxStartups:
arg = strdelim(&cp);
if (!arg || *arg == '\0')
fatal("%s line %d: Missing MaxStartups spec.",
filename, linenum);
if ((n = sscanf(arg, "%d:%d:%d",
&options->max_startups_begin,
&options->max_startups_rate,
&options->max_startups)) == 3) {
if (options->max_startups_begin >
options->max_startups ||
options->max_startups_rate > 100 ||
options->max_startups_rate < 1)
fatal("%s line %d: Illegal MaxStartups spec.",
filename, linenum);
} else if (n != 1)
fatal("%s line %d: Illegal MaxStartups spec.",
filename, linenum);
else
options->max_startups = options->max_startups_begin;
break;
case sBanner:
charptr = &options->banner;
goto parse_filename;
/*
* These options can contain %X options expanded at
* connect time, so that you can specify paths like:
*
* AuthorizedKeysFile /etc/ssh_keys/%u
*/
case sAuthorizedKeysFile:
case sAuthorizedKeysFile2:
charptr = (opcode == sAuthorizedKeysFile ) ?
&options->authorized_keys_file :
&options->authorized_keys_file2;
goto parse_filename;
case sClientAliveInterval:
intptr = &options->client_alive_interval;
goto parse_time;
case sClientAliveCountMax:
intptr = &options->client_alive_count_max;
goto parse_int;
case sDeprecated:
logit("%s line %d: Deprecated option %s",
filename, linenum, arg);
while (arg)
arg = strdelim(&cp);
break;
case sUnsupported:
logit("%s line %d: Unsupported option %s",
filename, linenum, arg);
while (arg)
arg = strdelim(&cp);
break;
default:
fatal("%s line %d: Missing handler for opcode %s (%d)",
filename, linenum, arg, opcode);
}
if ((arg = strdelim(&cp)) != NULL && *arg != '\0')
fatal("%s line %d: garbage at end of line; \"%.200s\".",
filename, linenum, arg);
return 0;
}
/* Reads the server configuration file. */
void
read_server_config(ServerOptions *options, const char *filename)
{
int linenum, bad_options = 0;
char line[1024];
FILE *f;
debug2("read_server_config: filename %s", filename);
f = fopen(filename, "r");
if (!f) {
perror(filename);
exit(1);
}
linenum = 0;
while (fgets(line, sizeof(line), f)) {
/* Update line number counter. */
linenum++;
if (process_server_config_line(options, line, filename, linenum) != 0)
bad_options++;
}
fclose(f);
if (bad_options > 0)
fatal("%s: terminating, %d bad configuration options",
filename, bad_options);
}