blob: ca0495d32eea72fdf32f5d422ea4f12f5f8bbeb3 [file] [log] [blame] [raw]
/*
* Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
* All rights reserved
*
* As far as I am concerned, the code I have written for this software
* can be used freely for any purpose. Any derived versions of this
* software must be clearly marked as such, and if the derived work is
* incompatible with the protocol description in the RFC file, it must be
* called by a name other than "ssh" or "Secure Shell".
*/
#include "includes.h"
RCSID("$OpenBSD: auth1.c,v 1.6 2000/10/11 20:27:23 markus Exp $");
#ifdef HAVE_OSF_SIA
# include <sia.h>
# include <siad.h>
#endif
#include "xmalloc.h"
#include "rsa.h"
#include "ssh.h"
#include "packet.h"
#include "buffer.h"
#include "mpaux.h"
#include "servconf.h"
#include "compat.h"
#include "auth.h"
#include "session.h"
/* import */
extern ServerOptions options;
extern char *forced_command;
#ifdef WITH_AIXAUTHENTICATE
extern char *aixloginmsg;
#endif /* WITH_AIXAUTHENTICATE */
#ifdef HAVE_OSF_SIA
extern int saved_argc;
extern char **saved_argv;
#endif /* HAVE_OSF_SIA */
/*
* convert ssh auth msg type into description
*/
char *
get_authname(int type)
{
static char buf[1024];
switch (type) {
case SSH_CMSG_AUTH_PASSWORD:
return "password";
case SSH_CMSG_AUTH_RSA:
return "rsa";
case SSH_CMSG_AUTH_RHOSTS_RSA:
return "rhosts-rsa";
case SSH_CMSG_AUTH_RHOSTS:
return "rhosts";
#ifdef KRB4
case SSH_CMSG_AUTH_KERBEROS:
return "kerberos";
#endif
#ifdef SKEY
case SSH_CMSG_AUTH_TIS_RESPONSE:
return "s/key";
#endif
}
snprintf(buf, sizeof buf, "bad-auth-msg-%d", type);
return buf;
}
/*
* read packets and try to authenticate local user 'luser'.
* return if authentication is successfull. not that pw == NULL
* if the user does not exists or is not allowed to login.
* each auth method has to 'fake' authentication for nonexisting
* users.
*/
void
do_authloop(struct passwd * pw, char *luser)
{
int authenticated = 0;
int attempt = 0;
unsigned int bits;
RSA *client_host_key;
BIGNUM *n;
char *client_user, *password;
char user[1024];
unsigned int dlen;
int plen, nlen, elen;
unsigned int ulen;
int type = 0;
void (*authlog) (const char *fmt,...) = verbose;
/* Indicate that authentication is needed. */
packet_start(SSH_SMSG_FAILURE);
packet_send();
packet_write_wait();
client_user = NULL;
for (attempt = 1;; attempt++) {
/* default to fail */
authenticated = 0;
strlcpy(user, "", sizeof user);
/* Get a packet from the client. */
type = packet_read(&plen);
/* Process the packet. */
switch (type) {
#ifdef AFS
case SSH_CMSG_HAVE_KERBEROS_TGT:
if (!options.kerberos_tgt_passing) {
verbose("Kerberos tgt passing disabled.");
break;
} else {
/* Accept Kerberos tgt. */
char *tgt = packet_get_string(&dlen);
packet_integrity_check(plen, 4 + dlen, type);
if (!auth_kerberos_tgt(pw, tgt))
verbose("Kerberos tgt REFUSED for %.100s", luser);
xfree(tgt);
}
continue;
case SSH_CMSG_HAVE_AFS_TOKEN:
if (!options.afs_token_passing || !k_hasafs()) {
verbose("AFS token passing disabled.");
break;
} else {
/* Accept AFS token. */
char *token_string = packet_get_string(&dlen);
packet_integrity_check(plen, 4 + dlen, type);
if (!auth_afs_token(pw, token_string))
verbose("AFS token REFUSED for %.100s", luser);
xfree(token_string);
}
continue;
#endif /* AFS */
#ifdef KRB4
case SSH_CMSG_AUTH_KERBEROS:
if (!options.kerberos_authentication) {
/* packet_get_all(); */
verbose("Kerberos authentication disabled.");
break;
} else {
/* Try Kerberos v4 authentication. */
KTEXT_ST auth;
char *tkt_user = NULL;
char *kdata = packet_get_string((unsigned int *) &auth.length);
packet_integrity_check(plen, 4 + auth.length, type);
if (auth.length < MAX_KTXT_LEN)
memcpy(auth.dat, kdata, auth.length);
xfree(kdata);
if (pw != NULL) {
authenticated = auth_krb4(pw->pw_name, &auth, &tkt_user);
if (authenticated) {
snprintf(user, sizeof user, " tktuser %s", tkt_user);
xfree(tkt_user);
}
}
}
break;
#endif /* KRB4 */
case SSH_CMSG_AUTH_RHOSTS:
if (!options.rhosts_authentication) {
verbose("Rhosts authentication disabled.");
break;
}
/*
* Get client user name. Note that we just have to
* trust the client; this is one reason why rhosts
* authentication is insecure. (Another is
* IP-spoofing on a local network.)
*/
client_user = packet_get_string(&ulen);
packet_integrity_check(plen, 4 + ulen, type);
/* Try to authenticate using /etc/hosts.equiv and .rhosts. */
authenticated = auth_rhosts(pw, client_user);
snprintf(user, sizeof user, " ruser %s", client_user);
break;
case SSH_CMSG_AUTH_RHOSTS_RSA:
if (!options.rhosts_rsa_authentication) {
verbose("Rhosts with RSA authentication disabled.");
break;
}
/*
* Get client user name. Note that we just have to
* trust the client; root on the client machine can
* claim to be any user.
*/
client_user = packet_get_string(&ulen);
/* Get the client host key. */
client_host_key = RSA_new();
if (client_host_key == NULL)
fatal("RSA_new failed");
client_host_key->e = BN_new();
client_host_key->n = BN_new();
if (client_host_key->e == NULL || client_host_key->n == NULL)
fatal("BN_new failed");
bits = packet_get_int();
packet_get_bignum(client_host_key->e, &elen);
packet_get_bignum(client_host_key->n, &nlen);
if (bits != BN_num_bits(client_host_key->n))
verbose("Warning: keysize mismatch for client_host_key: "
"actual %d, announced %d", BN_num_bits(client_host_key->n), bits);
packet_integrity_check(plen, (4 + ulen) + 4 + elen + nlen, type);
authenticated = auth_rhosts_rsa(pw, client_user, client_host_key);
RSA_free(client_host_key);
snprintf(user, sizeof user, " ruser %s", client_user);
break;
case SSH_CMSG_AUTH_RSA:
if (!options.rsa_authentication) {
verbose("RSA authentication disabled.");
break;
}
/* RSA authentication requested. */
n = BN_new();
packet_get_bignum(n, &nlen);
packet_integrity_check(plen, nlen, type);
authenticated = auth_rsa(pw, n);
BN_clear_free(n);
break;
case SSH_CMSG_AUTH_PASSWORD:
if (!options.password_authentication) {
verbose("Password authentication disabled.");
break;
}
/*
* Read user password. It is in plain text, but was
* transmitted over the encrypted channel so it is
* not visible to an outside observer.
*/
password = packet_get_string(&dlen);
packet_integrity_check(plen, 4 + dlen, type);
#ifdef USE_PAM
/* Do PAM auth with password */
authenticated = auth_pam_password(pw, password);
#elif defined(HAVE_OSF_SIA)
/* Do SIA auth with password */
if (sia_validate_user(NULL, saved_argc, saved_argv,
get_canonical_hostname(), pw->pw_name, NULL, 0,
NULL, password) == SIASUCCESS) {
authenticated = 1;
}
#else /* !USE_PAM && !HAVE_OSF_SIA */
/* Try authentication with the password. */
authenticated = auth_password(pw, password);
#endif /* USE_PAM */
memset(password, 0, strlen(password));
xfree(password);
break;
#ifdef SKEY
case SSH_CMSG_AUTH_TIS:
debug("rcvd SSH_CMSG_AUTH_TIS");
if (options.skey_authentication == 1) {
char *skeyinfo = NULL;
if (pw != NULL)
skeyinfo = skey_keyinfo(pw->pw_name);
if (skeyinfo == NULL) {
debug("generating fake skeyinfo for %.100s.", luser);
skeyinfo = skey_fake_keyinfo(luser);
}
if (skeyinfo != NULL) {
/* we send our s/key- in tis-challenge messages */
debug("sending challenge '%s'", skeyinfo);
packet_start(SSH_SMSG_AUTH_TIS_CHALLENGE);
packet_put_cstring(skeyinfo);
packet_send();
packet_write_wait();
continue;
}
}
break;
case SSH_CMSG_AUTH_TIS_RESPONSE:
debug("rcvd SSH_CMSG_AUTH_TIS_RESPONSE");
if (options.skey_authentication == 1) {
char *response = packet_get_string(&dlen);
debug("skey response == '%s'", response);
packet_integrity_check(plen, 4 + dlen, type);
authenticated = (pw != NULL &&
skey_haskey(pw->pw_name) == 0 &&
skey_passcheck(pw->pw_name, response) != -1);
xfree(response);
}
break;
#else
case SSH_CMSG_AUTH_TIS:
/* TIS Authentication is unsupported */
log("TIS authentication unsupported.");
break;
#endif
default:
/*
* Any unknown messages will be ignored (and failure
* returned) during authentication.
*/
log("Unknown message during authentication: type %d", type);
break;
}
if (authenticated && pw == NULL)
fatal("internal error: authenticated for pw == NULL");
#ifdef HAVE_CYGWIN
if (authenticated &&
!check_nt_auth(type == SSH_CMSG_AUTH_PASSWORD,pw->pw_uid)) {
packet_disconnect("Authentication rejected for uid %d.",
(int)pw->pw_uid);
authenticated = 0;
}
#endif
/*
* Check if the user is logging in as root and root logins
* are disallowed.
* Note that root login is allowed for forced commands.
*/
if (authenticated && pw && pw->pw_uid == 0 && !options.permit_root_login) {
if (forced_command) {
log("Root login accepted for forced command.");
} else {
authenticated = 0;
log("ROOT LOGIN REFUSED FROM %.200s",
get_canonical_hostname());
}
}
/* Raise logging level */
if (authenticated ||
attempt == AUTH_FAIL_LOG ||
type == SSH_CMSG_AUTH_PASSWORD)
authlog = log;
authlog("%s %s for %s%.100s from %.200s port %d%s",
authenticated ? "Accepted" : "Failed",
get_authname(type),
pw ? "" : "illegal user ",
pw && pw->pw_uid == 0 ? "ROOT" : luser,
get_remote_ipaddr(),
get_remote_port(),
user);
#ifdef USE_PAM
if (authenticated && !do_pam_account(pw->pw_name, client_user))
authenticated = 0;
#endif
if (client_user != NULL) {
xfree(client_user);
client_user = NULL;
}
if (authenticated)
return;
if (attempt > AUTH_FAIL_MAX) {
#ifdef WITH_AIXAUTHENTICATE
loginfailed(user,get_canonical_hostname(),"ssh");
#endif /* WITH_AIXAUTHENTICATE */
packet_disconnect(AUTH_FAIL_MSG, luser);
}
/* Send a message indicating that the authentication attempt failed. */
packet_start(SSH_SMSG_FAILURE);
packet_send();
packet_write_wait();
}
}
/*
* Performs authentication of an incoming connection. Session key has already
* been exchanged and encryption is enabled.
*/
void
do_authentication()
{
struct passwd *pw, pwcopy;
int plen;
unsigned int ulen;
char *user;
/* Get the name of the user that we wish to log in as. */
packet_read_expect(&plen, SSH_CMSG_USER);
/* Get the user name. */
user = packet_get_string(&ulen);
packet_integrity_check(plen, (4 + ulen), SSH_CMSG_USER);
setproctitle("%s", user);
#ifdef AFS
/* If machine has AFS, set process authentication group. */
if (k_hasafs()) {
k_setpag();
k_unlog();
}
#endif /* AFS */
/* Verify that the user is a valid user. */
pw = getpwnam(user);
if (pw && allowed_user(pw)) {
/* Take a copy of the returned structure. */
memset(&pwcopy, 0, sizeof(pwcopy));
pwcopy.pw_name = xstrdup(pw->pw_name);
pwcopy.pw_passwd = xstrdup(pw->pw_passwd);
pwcopy.pw_uid = pw->pw_uid;
pwcopy.pw_gid = pw->pw_gid;
#ifdef HAVE_PW_CLASS_IN_PASSWD
pwcopy.pw_class = xstrdup(pw->pw_class);
#endif
pwcopy.pw_dir = xstrdup(pw->pw_dir);
pwcopy.pw_shell = xstrdup(pw->pw_shell);
pw = &pwcopy;
} else {
pw = NULL;
}
#ifdef USE_PAM
if (pw)
start_pam(pw);
#endif
/*
* If we are not running as root, the user must have the same uid as
* the server. (Unless you are running Windows)
*/
#ifndef HAVE_CYGWIN
if (getuid() != 0 && pw && pw->pw_uid != getuid())
packet_disconnect("Cannot change user when server not running as root.");
#endif
debug("Attempting authentication for %s%.100s.", pw ? "" : "illegal user ", user);
/* If the user has no password, accept authentication immediately. */
if (options.password_authentication &&
#ifdef KRB4
(!options.kerberos_authentication || options.kerberos_or_local_passwd) &&
#endif /* KRB4 */
#ifdef USE_PAM
auth_pam_password(pw, "")) {
#elif defined(HAVE_OSF_SIA)
(sia_validate_user(NULL, saved_argc, saved_argv,
get_canonical_hostname(), pw->pw_name, NULL, 0,
NULL, "") == SIASUCCESS)) {
#else /* !HAVE_OSF_SIA && !USE_PAM */
auth_password(pw, "")) {
#endif /* USE_PAM */
/* Authentication with empty password succeeded. */
log("Login for user %s from %.100s, accepted without authentication.",
user, get_remote_ipaddr());
} else {
/* Loop until the user has been authenticated or the
connection is closed, do_authloop() returns only if
authentication is successfull */
do_authloop(pw, user);
}
if (pw == NULL)
fatal("internal error, authentication successfull for user '%.100s'", user);
/* The user has been authenticated and accepted. */
packet_start(SSH_SMSG_SUCCESS);
packet_send();
packet_write_wait();
#ifdef WITH_AIXAUTHENTICATE
/* We don't have a pty yet, so just label the line as "ssh" */
if (loginsuccess(user,get_canonical_hostname(),"ssh",&aixloginmsg) < 0)
aixloginmsg = NULL;
#endif /* WITH_AIXAUTHENTICATE */
/* Perform session preparation. */
do_authenticated(pw);
}