buildpkg.sh.in - security/openssh-library - Rivoreo Source Code Repositories

 #!/bin/sh
 #
 # Fake Root Solaris/SVR4/SVR5 Build System - Prototype
 #
 # The following code has been provide under Public Domain License.  I really
 # don't care what you use it for.  Just as long as you don't complain to me
 # nor my employer if you break it. - Ben Lindstrom (mouring@eviladmin.org)
 #
 umask 022
 #
 # Options for building the package
 # You can create a openssh-config.local with your customized options
 #
 REMOVE_FAKE_ROOT_WHEN_DONE=yes
 #
 # uncommenting TEST_DIR and using
 # configure --prefix=/var/tmp --with-privsep-path=/var/tmp/empty
 # and
 # PKGNAME=tOpenSSH should allow testing a package without interfering
 # with a real OpenSSH package on a system. This is not needed on systems
 # that support the -R option to pkgadd.
 #TEST_DIR=/var/tmp	# leave commented out for production build
 PKGNAME=OpenSSH
 # revisions within the same version (REV=a)
 #REV=
 SYSVINIT_NAME=opensshd
 MAKE=${MAKE:="make"}
 SSHDUID=67	# Default privsep uid
 SSHDGID=67	# Default privsep gid
 # uncomment these next three as needed
 #PERMIT_ROOT_LOGIN=no
 #X11_FORWARDING=yes
 #USR_LOCAL_IS_SYMLINK=yes
 # System V init run levels
 SYSVINITSTART=S98
 SYSVINITSTOPT=K30
 # We will source these if they exist
 POST_MAKE_INSTALL_FIXES=./pkg-post-make-install-fixes.sh
 POST_PROTOTYPE_EDITS=./pkg-post-prototype-edit.sh
 # We'll be one level deeper looking for these
 PKG_PREINSTALL_LOCAL=../pkg-preinstall.local
 PKG_POSTINSTALL_LOCAL=../pkg-postinstall.local
 PKG_PREREMOVE_LOCAL=../pkg-preremove.local
 PKG_POSTREMOVE_LOCAL=../pkg-postremove.local
 PKG_REQUEST_LOCAL=../pkg-request.local
 # end of sourced files
 #
 OPENSSHD=opensshd.init

 PATH_GROUPADD_PROG=@PATH_GROUPADD_PROG@
 PATH_USERADD_PROG=@PATH_USERADD_PROG@
 PATH_PASSWD_PROG=@PATH_PASSWD_PROG@
 #
 # list of system directories we do NOT want to change owner/group/perms
 # when installing our package
 SYSTEM_DIR="/etc	\
 /etc/init.d		\
 /etc/rcS.d		\
 /etc/rc0.d		\
 /etc/rc1.d		\
 /etc/rc2.d		\
 /etc/opt		\
 /opt			\
 /opt/bin		\
 /usr			\
 /usr/bin		\
 /usr/lib		\
 /usr/sbin		\
 /usr/share		\
 /usr/share/man		\
 /usr/share/man/man1	\
 /usr/share/man/man8	\
 /usr/local		\
 /usr/local/bin		\
 /usr/local/etc		\
 /usr/local/libexec	\
 /usr/local/man		\
 /usr/local/man/man1	\
 /usr/local/man/man8	\
 /usr/local/sbin		\
 /usr/local/share	\
 /var			\
 /var/opt		\
 /var/run		\
 /var/tmp		\
 /tmp"

 # We may need to build as root so we make sure PATH is set up
 # only set the path if it's not set already
 [ -d /opt/bin ]  &&  {
 	echo $PATH | grep ":/opt/bin"  > /dev/null 2>&1
 	[ $? -ne 0 ] && PATH=$PATH:/opt/bin
 }
 [ -d /usr/local/bin ]  &&  {
 	echo $PATH | grep ":/usr/local/bin"  > /dev/null 2>&1
 	[ $? -ne 0 ] && PATH=$PATH:/usr/local/bin
 }
 [ -d /usr/ccs/bin ]  &&  {
 	echo $PATH | grep ":/usr/ccs/bin"  > /dev/null 2>&1
 	[ $? -ne 0 ] && PATH=$PATH:/usr/ccs/bin
 }
 export PATH
 #

 [ -f Makefile ]  ||  {
 	echo "Please run this script from your build directory"
 	exit 1
 }

 # we will look for openssh-config.local to override the above options
 [ -s ./openssh-config.local ]  &&  . ./openssh-config.local

 START=`pwd`
 FAKE_ROOT=$START/pkg

 ## Fill in some details, like prefix and sysconfdir
 for confvar in prefix exec_prefix bindir sbindir libexecdir datadir mandir sysconfdir piddir srcdir
 do
 	eval $confvar=`grep "^$confvar=" Makefile | cut -d = -f 2`
 done


 ## Collect value of privsep user
 for confvar in SSH_PRIVSEP_USER
 do
 	eval $confvar=`awk '/#define[ \t]'$confvar'/{print $3}' config.h`
 done

 ## Set privsep defaults if not defined
 if [ -z "$SSH_PRIVSEP_USER" ]
 then
 	SSH_PRIVSEP_USER=sshd
 fi

 ## Extract common info requires for the 'info' part of the package.
 VERSION=`./ssh -V 2>&1 | sed -e 's/,.*//'`

 ARCH=`uname -m`
 DEF_MSG="\n"
 OS_VER=`uname -v`
 SCRIPT_SHELL=/sbin/sh
 UNAME_S=`uname -s`
 case ${UNAME_S} in
 	SunOS)	UNAME_S=Solaris
 		ARCH=`uname -p`
 		RCS_D=yes
 		DEF_MSG="(default: n)"
 		;;
 	SCO_SV)	UNAME_S=OpenServer
 		OS_VER=`uname -X | grep Release | sed -e 's/^Rel.*3.2v//'`
 		SCRIPT_SHELL=/bin/sh
 		RC1_D=no
 		DEF_MSG="(default: n)"
 		;;
 esac

 case `basename $0` in
 	buildpkg.sh)
 ## Start by faking root install
 echo "Faking root install..."
 [ -d $FAKE_ROOT ]  &&  rm -fr $FAKE_ROOT
 mkdir $FAKE_ROOT
 ${MAKE} install-nokeys DESTDIR=$FAKE_ROOT
 if [ $? -gt 0 ]
 then
 	echo "Fake root install failed, stopping."
 	exit 1
 fi

 ## Setup our run level stuff while we are at it.
 mkdir -p $FAKE_ROOT${TEST_DIR}/etc/init.d

 cp ${OPENSSHD} $FAKE_ROOT${TEST_DIR}/etc/init.d/${SYSVINIT_NAME}
 chmod 744 $FAKE_ROOT${TEST_DIR}/etc/init.d/${SYSVINIT_NAME}

 [ "${PERMIT_ROOT_LOGIN}" = no ]  &&  \
 	perl -p -i -e "s/#PermitRootLogin yes/PermitRootLogin no/" \
 		$FAKE_ROOT/${sysconfdir}/sshd_config
 [ "${X11_FORWARDING}" = yes ]  &&  \
 	perl -p -i -e "s/#X11Forwarding no/X11Forwarding yes/" \
 		$FAKE_ROOT/${sysconfdir}/sshd_config
 # fix PrintMotd
 perl -p -i -e "s/#PrintMotd yes/PrintMotd no/" \
 	$FAKE_ROOT/${sysconfdir}/sshd_config

 # We don't want to overwrite config files on multiple installs
 mv $FAKE_ROOT/${sysconfdir}/ssh_config $FAKE_ROOT/${sysconfdir}/ssh_config.default
 mv $FAKE_ROOT/${sysconfdir}/sshd_config $FAKE_ROOT/${sysconfdir}/sshd_config.default
 [ -f $FAKE_ROOT/${sysconfdir}/ssh_prng_cmds ]  &&  \
 mv $FAKE_ROOT/${sysconfdir}/ssh_prng_cmds $FAKE_ROOT/${sysconfdir}/ssh_prng_cmds.default

 # local tweeks here
 [ -s "${POST_MAKE_INSTALL_FIXES}" ]  &&  . ${POST_MAKE_INSTALL_FIXES}

 cd $FAKE_ROOT

 ## Ok, this is outright wrong, but it will work.  I'm tired of pkgmk
 ## whining.
 for i in *; do
   PROTO_ARGS="$PROTO_ARGS $i=/$i";
 done

 ## Build info file
 echo "Building pkginfo file..."
 cat > pkginfo << _EOF
 PKG=$PKGNAME
 NAME="OpenSSH Portable for ${UNAME_S}"
 DESC="Secure Shell remote access utility; replaces telnet and rlogin/rsh."
 VENDOR="OpenSSH Portable Team - http://www.openssh.com/portable.html"
 ARCH=$ARCH
 VERSION=$VERSION$REV
 CATEGORY="Security,application"
 BASEDIR=/
 CLASSES="none"
 PSTAMP="${UNAME_S} ${OS_VER} ${ARCH} `date '+%d%b%Y %H:%M'`"
 _EOF

 ## Build empty depend file that may get updated by $POST_PROTOTYPE_EDITS
 echo "Building depend file..."
 touch depend

 ## Build space file
 echo "Building space file..."
 cat > space << _EOF
 # extra space required by start/stop links added by installf in postinstall
 $TEST_DIR/etc/rc0.d/${SYSVINITSTOPT}${SYSVINIT_NAME} 0 1
 $TEST_DIR/etc/rc2.d/${SYSVINITSTART}${SYSVINIT_NAME} 0 1
 _EOF
 [ "$RC1_D" = no ]  ||  \
 echo "$TEST_DIR/etc/rc1.d/${SYSVINITSTOPT}${SYSVINIT_NAME} 0 1" >> space
 [ "$RCS_D" = yes ]  &&  \
 echo "$TEST_DIR/etc/rcS.d/${SYSVINITSTOPT}${SYSVINIT_NAME} 0 1" >> space

 ## Build preinstall file
 echo "Building preinstall file..."
 cat > preinstall << _EOF
 #! ${SCRIPT_SHELL}
 #
 _EOF

 # local preinstall changes here
 [ -s "${PKG_PREINSTALL_LOCAL}" ]  &&  . ${PKG_PREINSTALL_LOCAL}

 cat >> preinstall << _EOF
 #
 [ "\${PRE_INS_STOP}" = "yes" ]  &&  ${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} stop
 exit 0
 _EOF

 ## Build postinstall file
 echo "Building postinstall file..."
 cat > postinstall << _EOF
 #! ${SCRIPT_SHELL}
 #
 [ -f \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_config ]  ||  \\
 	cp -p \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_config.default \\
 		\${PKG_INSTALL_ROOT}${sysconfdir}/ssh_config
 [ -f \${PKG_INSTALL_ROOT}${sysconfdir}/sshd_config ]  ||  \\
 	cp -p \${PKG_INSTALL_ROOT}${sysconfdir}/sshd_config.default \\
 		\${PKG_INSTALL_ROOT}${sysconfdir}/sshd_config
 [ -f \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_prng_cmds.default ]  &&  {
 	[ -f \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_prng_cmds ]  ||  \\
 	cp -p \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_prng_cmds.default \\
 		\${PKG_INSTALL_ROOT}${sysconfdir}/ssh_prng_cmds
 }

 # make rc?.d dirs only if we are doing a test install
 [ -n "${TEST_DIR}" ]  &&  {
 	[ "$RCS_D" = yes ]  &&  mkdir -p ${TEST_DIR}/etc/rcS.d
 	mkdir -p ${TEST_DIR}/etc/rc0.d
 	[ "$RC1_D" = no ]  ||  mkdir -p ${TEST_DIR}/etc/rc1.d
 	mkdir -p ${TEST_DIR}/etc/rc2.d
 }

 if [ "\${USE_SYM_LINKS}" = yes ]
 then
 	[ "$RCS_D" = yes ]  &&  \
 installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rcS.d/${SYSVINITSTOPT}${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s
 	installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc0.d/${SYSVINITSTOPT}${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s
 	[ "$RC1_D" = no ]  ||  \
 	installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc1.d/${SYSVINITSTOPT}${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s
 	installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc2.d/${SYSVINITSTART}${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s
 else
 	[ "$RCS_D" = yes ]  &&  \
 installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rcS.d/${SYSVINITSTOPT}${SYSVINIT_NAME}=\${PKG_INSTALL_ROOT}$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l
 	installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc0.d/${SYSVINITSTOPT}${SYSVINIT_NAME}=\${PKG_INSTALL_ROOT}$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l
 	[ "$RC1_D" = no ]  ||  \
 	installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc1.d/${SYSVINITSTOPT}${SYSVINIT_NAME}=\${PKG_INSTALL_ROOT}$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l
 	installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc2.d/${SYSVINITSTART}${SYSVINIT_NAME}=\${PKG_INSTALL_ROOT}$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l
 fi

 # If piddir doesn't exist we add it. (Ie. --with-pid-dir=/var/opt/ssh)
 [ -d $piddir ]  ||  installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR$piddir d 0755 root sys

 _EOF

 # local postinstall changes here
 [ -s "${PKG_POSTINSTALL_LOCAL}" ]  &&  . ${PKG_POSTINSTALL_LOCAL}

 cat >> postinstall << _EOF
 installf -f ${PKGNAME}

 # Use chroot to handle PKG_INSTALL_ROOT
 if [ ! -z "\${PKG_INSTALL_ROOT}" ]
 then
 	chroot="chroot \${PKG_INSTALL_ROOT}"
 fi
 # If this is a test build, we will skip the groupadd/useradd/passwd commands
 if [ ! -z "${TEST_DIR}" ]
 then
 	chroot=echo
 fi

 if egrep '^[ \t]*UsePrivilegeSeparation[ \t]+no' \${PKG_INSTALL_ROOT}/$sysconfdir/sshd_config >/dev/null
 then
 	echo "UsePrivilegeSeparation disabled in config, not creating PrivSep user"
 	echo "or group."
 else
 	echo "UsePrivilegeSeparation enabled in config (or defaulting to on)."

 	# user required?
 	if cut -f1 -d: \${PKG_INSTALL_ROOT}/etc/passwd | egrep '^'$SSH_PRIVSEP_USER'\$' >/dev/null
 	then
 		echo "PrivSep user $SSH_PRIVSEP_USER already exists."
 		SSH_PRIVSEP_GROUP=\`grep "^$SSH_PRIVSEP_USER:" \${PKG_INSTALL_ROOT}/etc/passwd | awk -F: '{print \$4}'\`
 		SSH_PRIVSEP_GROUP=\`grep ":\$SSH_PRIVSEP_GROUP:" \${PKG_INSTALL_ROOT}/etc/group | awk -F: '{print \$1}'\`
 	else
 		DO_PASSWD=yes
 	fi
 	[ -z "\$SSH_PRIVSEP_GROUP" ]  &&  SSH_PRIVSEP_GROUP=$SSH_PRIVSEP_USER

 	# group required?
 	if cut -f1 -d: \${PKG_INSTALL_ROOT}/etc/group | egrep '^'\$SSH_PRIVSEP_GROUP'\$' >/dev/null
 	then
 		echo "PrivSep group \$SSH_PRIVSEP_GROUP already exists."
 	else
 		DO_GROUP=yes
 	fi

 	# create group if required
 	[ "\$DO_GROUP" = yes ]  &&  {
 		# Use gid of 67 if possible
 		if cut -f3 -d: \${PKG_INSTALL_ROOT}/etc/group | egrep '^'$SSHDGID'\$' >/dev/null
 		then
 			:
 		else
 			sshdgid="-g $SSHDGID"
 		fi
 		echo "Creating PrivSep group \$SSH_PRIVSEP_GROUP."
 		\$chroot ${PATH_GROUPADD_PROG} \$sshdgid \$SSH_PRIVSEP_GROUP
 	}

 	# Create user if required
 	[ "\$DO_PASSWD" = yes ]  &&  {
 		# Use uid of 67 if possible
 		if cut -f3 -d: \${PKG_INSTALL_ROOT}/etc/passwd | egrep '^'$SSHDUID'\$' >/dev/null
 		then
 			:
 		else
 			sshduid="-u $SSHDUID"
 		fi
 		echo "Creating PrivSep user $SSH_PRIVSEP_USER."
 		\$chroot ${PATH_USERADD_PROG} -c 'SSHD PrivSep User' -s /bin/false -g $SSH_PRIVSEP_USER \$sshduid $SSH_PRIVSEP_USER
 		\$chroot ${PATH_PASSWD_PROG} -l $SSH_PRIVSEP_USER
 	}
 fi

 [ "\${POST_INS_START}" = "yes" ]  &&  ${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} start
 exit 0
 _EOF

 ## Build preremove file
 echo "Building preremove file..."
 cat > preremove << _EOF
 #! ${SCRIPT_SHELL}
 #
 ${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} stop
 _EOF

 # local preremove changes here
 [ -s "${PKG_PREREMOVE_LOCAL}" ]  &&  . ${PKG_PREREMOVE_LOCAL}

 cat >> preremove << _EOF
 exit 0
 _EOF

 ## Build postremove file
 echo "Building postremove file..."
 cat > postremove << _EOF
 #! ${SCRIPT_SHELL}
 #
 _EOF

 # local postremove changes here
 [ -s "${PKG_POSTREMOVE_LOCAL}" ]  &&  . ${PKG_POSTREMOVE_LOCAL}

 cat >> postremove << _EOF
 exit 0
 _EOF

 ## Build request file
 echo "Building request file..."
 cat > request << _EOF
 trap 'exit 3' 15

 _EOF

 [ -x /usr/bin/ckyorn ]  ||  cat >> request << _EOF

 ckyorn() {
 # for some strange reason OpenServer has no ckyorn
 # We build a striped down version here

 DEFAULT=n
 PROMPT="Yes or No [yes,no,?,quit]"
 HELP_PROMPT="        Enter y or yes if your answer is yes; n or no if your answer is no."
 USAGE="usage: ckyorn [options]
 where options may include:
         -d default
         -h help
         -p prompt
 "

 if [ \$# != 0 ]
 then
 	while getopts d:p:h: c
 	do
 		case \$c in
 			h)	HELP_PROMPT="\$OPTARG" ;;
 			d)	DEFAULT=\$OPTARG ;;
 			p)	PROMPT=\$OPTARG ;;
 			\\?)	echo "\$USAGE" 1>&2
 				exit 1 ;;
 		esac
 	done
 	shift \`expr \$OPTIND - 1\`
 fi

 while true
 do
 	echo "\${PROMPT}\\c " 1>&2
 	read key
 	[ -z "\$key" ]  &&  key=\$DEFAULT
 	case \$key in
 		[n,N]|[n,N][o,O]|[y,Y]|[y,Y][e,E][s,S])	echo "\${key}\\c"
 			exit 0 ;;
 		\\?)	echo \$HELP_PROMPT 1>&2 ;;
 		q|quit)	echo "q\\c" 1>&2
 			exit 3 ;;
 	esac
 done

 }

 _EOF

 cat >> request << _EOF
 USE_SYM_LINKS=no
 PRE_INS_STOP=no
 POST_INS_START=no
 # Use symbolic links?
 ans=\`ckyorn -d n \
 -p "Do you want symbolic links for the start/stop scripts? ${DEF_MSG}"\` || exit \$?
 case \$ans in
 	[y,Y]*)	USE_SYM_LINKS=yes ;;
 esac

 # determine if should restart the daemon
 if [ -s ${piddir}/sshd.pid  -a  -f ${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} ]
 then
 	ans=\`ckyorn -d n \
 -p "Should the running sshd daemon be restarted? ${DEF_MSG}"\` || exit \$?
 	case \$ans in
 		[y,Y]*)	PRE_INS_STOP=yes
 			POST_INS_START=yes
 			;;
 	esac

 else

 # determine if we should start sshd
 	ans=\`ckyorn -d n \
 -p "Start the sshd daemon after installing this package? ${DEF_MSG}"\` || exit \$?
 	case \$ans in
 		[y,Y]*)	POST_INS_START=yes ;;
 	esac
 fi

 # make parameters available to installation service,
 # and so to any other packaging scripts
 cat >\$1 <<!
 USE_SYM_LINKS='\$USE_SYM_LINKS'
 PRE_INS_STOP='\$PRE_INS_STOP'
 POST_INS_START='\$POST_INS_START'
 !

 _EOF

 # local request changes here
 [ -s "${PKG_REQUEST_LOCAL}" ]  &&  . ${PKG_REQUEST_LOCAL}

 cat >> request << _EOF
 exit 0

 _EOF

 ## Next Build our prototype
 echo "Building prototype file..."
 cat >mk-proto.awk << _EOF
 	    BEGIN { print "i pkginfo"; print "i depend"; \\
 		    print "i preinstall"; print "i postinstall"; \\
  		    print "i preremove"; print "i postremove"; \\
 		    print "i request"; print "i space"; \\
 		    split("$SYSTEM_DIR",sys_files); }
 	    {
 	     for (dir in sys_files) { if ( \$3 != sys_files[dir] )
 		     { if ( \$1 == "s" )
 			{ \$5=""; \$6=""; }
 		     else
 			{ \$5="root"; \$6="sys"; }
 		     }
 		else
 		     { \$4="?"; \$5="?"; \$6="?"; break;}
 	    } }
 	    { print; }
 _EOF

 find . | egrep -v "prototype|pkginfo|mk-proto.awk" | sort | \
 	pkgproto $PROTO_ARGS | nawk -f mk-proto.awk > prototype

 # /usr/local is a symlink on some systems
 [ "${USR_LOCAL_IS_SYMLINK}" = yes ]  &&  {
 	grep -v "^d none /usr/local ? ? ?$" prototype > prototype.new
 	mv prototype.new prototype
 }

 ## Step back a directory and now build the package.
 cd ..
 # local prototype tweeks here
 [ -s "${POST_PROTOTYPE_EDITS}" ]  &&  . ${POST_PROTOTYPE_EDITS}

 echo "Building package.."
 pkgmk -d ${FAKE_ROOT} -f $FAKE_ROOT/prototype -o
 echo | pkgtrans -os ${FAKE_ROOT} ${START}/$PKGNAME-$VERSION$REV-$UNAME_S-$ARCH.pkg
 	;;

 	justpkg.sh)
 rm -fr ${FAKE_ROOT}/${PKGNAME}
 grep -v "^PSTAMP=" $FAKE_ROOT/pkginfo > $$tmp
 mv $$tmp $FAKE_ROOT/pkginfo
 cat >> $FAKE_ROOT/pkginfo << _EOF
 PSTAMP="${UNAME_S} ${OS_VER} ${ARCH} `date '+%d%b%Y %H:%M'`"
 _EOF
 pkgmk -d ${FAKE_ROOT} -f $FAKE_ROOT/prototype -o
 echo | pkgtrans -os ${FAKE_ROOT} ${START}/$PKGNAME-$VERSION$REV-$UNAME_S-$ARCH.pkg
 	;;

 esac

 [ "${REMOVE_FAKE_ROOT_WHEN_DONE}" = yes ]  &&  rm -rf $FAKE_ROOT
 exit 0
	#!/bin/sh
	#
	# Fake Root Solaris/SVR4/SVR5 Build System - Prototype
	#
	# The following code has been provide under Public Domain License. I really
	# don't care what you use it for. Just as long as you don't complain to me
	# nor my employer if you break it. - Ben Lindstrom (mouring@eviladmin.org)
	#
	umask 022
	#
	# Options for building the package
	# You can create a openssh-config.local with your customized options
	#
	REMOVE_FAKE_ROOT_WHEN_DONE=yes
	#
	# uncommenting TEST_DIR and using
	# configure --prefix=/var/tmp --with-privsep-path=/var/tmp/empty
	# and
	# PKGNAME=tOpenSSH should allow testing a package without interfering
	# with a real OpenSSH package on a system. This is not needed on systems
	# that support the -R option to pkgadd.
	#TEST_DIR=/var/tmp # leave commented out for production build
	PKGNAME=OpenSSH
	# revisions within the same version (REV=a)
	#REV=
	SYSVINIT_NAME=opensshd
	MAKE=${MAKE:="make"}
	SSHDUID=67 # Default privsep uid
	SSHDGID=67 # Default privsep gid
	# uncomment these next three as needed
	#PERMIT_ROOT_LOGIN=no
	#X11_FORWARDING=yes
	#USR_LOCAL_IS_SYMLINK=yes
	# System V init run levels
	SYSVINITSTART=S98
	SYSVINITSTOPT=K30
	# We will source these if they exist
	POST_MAKE_INSTALL_FIXES=./pkg-post-make-install-fixes.sh
	POST_PROTOTYPE_EDITS=./pkg-post-prototype-edit.sh
	# We'll be one level deeper looking for these
	PKG_PREINSTALL_LOCAL=../pkg-preinstall.local
	PKG_POSTINSTALL_LOCAL=../pkg-postinstall.local
	PKG_PREREMOVE_LOCAL=../pkg-preremove.local
	PKG_POSTREMOVE_LOCAL=../pkg-postremove.local
	PKG_REQUEST_LOCAL=../pkg-request.local
	# end of sourced files
	#
	OPENSSHD=opensshd.init

	PATH_GROUPADD_PROG=@PATH_GROUPADD_PROG@
	PATH_USERADD_PROG=@PATH_USERADD_PROG@
	PATH_PASSWD_PROG=@PATH_PASSWD_PROG@
	#
	# list of system directories we do NOT want to change owner/group/perms
	# when installing our package
	SYSTEM_DIR="/etc \
	/etc/init.d \
	/etc/rcS.d \
	/etc/rc0.d \
	/etc/rc1.d \
	/etc/rc2.d \
	/etc/opt \
	/opt \
	/opt/bin \
	/usr \
	/usr/bin \
	/usr/lib \
	/usr/sbin \
	/usr/share \
	/usr/share/man \
	/usr/share/man/man1 \
	/usr/share/man/man8 \
	/usr/local \
	/usr/local/bin \
	/usr/local/etc \
	/usr/local/libexec \
	/usr/local/man \
	/usr/local/man/man1 \
	/usr/local/man/man8 \
	/usr/local/sbin \
	/usr/local/share \
	/var \
	/var/opt \
	/var/run \
	/var/tmp \
	/tmp"

	# We may need to build as root so we make sure PATH is set up
	# only set the path if it's not set already
	[ -d /opt/bin ] && {
	echo $PATH \| grep ":/opt/bin" > /dev/null 2>&1
	[ $? -ne 0 ] && PATH=$PATH:/opt/bin
	}
	[ -d /usr/local/bin ] && {
	echo $PATH \| grep ":/usr/local/bin" > /dev/null 2>&1
	[ $? -ne 0 ] && PATH=$PATH:/usr/local/bin
	}
	[ -d /usr/ccs/bin ] && {
	echo $PATH \| grep ":/usr/ccs/bin" > /dev/null 2>&1
	[ $? -ne 0 ] && PATH=$PATH:/usr/ccs/bin
	}
	export PATH
	#

	[ -f Makefile ] \|\| {
	echo "Please run this script from your build directory"
	exit 1
	}

	# we will look for openssh-config.local to override the above options
	[ -s ./openssh-config.local ] && . ./openssh-config.local

	START=`pwd`
	FAKE_ROOT=$START/pkg

	## Fill in some details, like prefix and sysconfdir
	for confvar in prefix exec_prefix bindir sbindir libexecdir datadir mandir sysconfdir piddir srcdir
	do
	eval $confvar=`grep "^$confvar=" Makefile \| cut -d = -f 2`
	done


	## Collect value of privsep user
	for confvar in SSH_PRIVSEP_USER
	do
	eval $confvar=`awk '/#define[ \t]'$confvar'/{print $3}' config.h`
	done

	## Set privsep defaults if not defined
	if [ -z "$SSH_PRIVSEP_USER" ]
	then
	SSH_PRIVSEP_USER=sshd
	fi

	## Extract common info requires for the 'info' part of the package.
	VERSION=`./ssh -V 2>&1 \| sed -e 's/,.*//'`

	ARCH=`uname -m`
	DEF_MSG="\n"
	OS_VER=`uname -v`
	SCRIPT_SHELL=/sbin/sh
	UNAME_S=`uname -s`
	case ${UNAME_S} in
	SunOS) UNAME_S=Solaris
	ARCH=`uname -p`
	RCS_D=yes
	DEF_MSG="(default: n)"
	;;
	SCO_SV) UNAME_S=OpenServer
	OS_VER=`uname -X \| grep Release \| sed -e 's/^Rel.*3.2v//'`
	SCRIPT_SHELL=/bin/sh
	RC1_D=no
	DEF_MSG="(default: n)"
	;;
	esac

	case `basename $0` in
	buildpkg.sh)
	## Start by faking root install
	echo "Faking root install..."
	[ -d $FAKE_ROOT ] && rm -fr $FAKE_ROOT
	mkdir $FAKE_ROOT
	${MAKE} install-nokeys DESTDIR=$FAKE_ROOT
	if [ $? -gt 0 ]
	then
	echo "Fake root install failed, stopping."
	exit 1
	fi

	## Setup our run level stuff while we are at it.
	mkdir -p $FAKE_ROOT${TEST_DIR}/etc/init.d

	cp ${OPENSSHD} $FAKE_ROOT${TEST_DIR}/etc/init.d/${SYSVINIT_NAME}
	chmod 744 $FAKE_ROOT${TEST_DIR}/etc/init.d/${SYSVINIT_NAME}

	[ "${PERMIT_ROOT_LOGIN}" = no ] && \
	perl -p -i -e "s/#PermitRootLogin yes/PermitRootLogin no/" \
	$FAKE_ROOT/${sysconfdir}/sshd_config
	[ "${X11_FORWARDING}" = yes ] && \
	perl -p -i -e "s/#X11Forwarding no/X11Forwarding yes/" \
	$FAKE_ROOT/${sysconfdir}/sshd_config
	# fix PrintMotd
	perl -p -i -e "s/#PrintMotd yes/PrintMotd no/" \
	$FAKE_ROOT/${sysconfdir}/sshd_config

	# We don't want to overwrite config files on multiple installs
	mv $FAKE_ROOT/${sysconfdir}/ssh_config $FAKE_ROOT/${sysconfdir}/ssh_config.default
	mv $FAKE_ROOT/${sysconfdir}/sshd_config $FAKE_ROOT/${sysconfdir}/sshd_config.default
	[ -f $FAKE_ROOT/${sysconfdir}/ssh_prng_cmds ] && \
	mv $FAKE_ROOT/${sysconfdir}/ssh_prng_cmds $FAKE_ROOT/${sysconfdir}/ssh_prng_cmds.default

	# local tweeks here
	[ -s "${POST_MAKE_INSTALL_FIXES}" ] && . ${POST_MAKE_INSTALL_FIXES}

	cd $FAKE_ROOT

	## Ok, this is outright wrong, but it will work. I'm tired of pkgmk
	## whining.
	for i in *; do
	PROTO_ARGS="$PROTO_ARGS $i=/$i";
	done

	## Build info file
	echo "Building pkginfo file..."
	cat > pkginfo << _EOF
	PKG=$PKGNAME
	NAME="OpenSSH Portable for ${UNAME_S}"
	DESC="Secure Shell remote access utility; replaces telnet and rlogin/rsh."
	VENDOR="OpenSSH Portable Team - http://www.openssh.com/portable.html"
	ARCH=$ARCH
	VERSION=$VERSION$REV
	CATEGORY="Security,application"
	BASEDIR=/
	CLASSES="none"
	PSTAMP="${UNAME_S} ${OS_VER} ${ARCH} `date '+%d%b%Y %H:%M'`"
	_EOF

	## Build empty depend file that may get updated by $POST_PROTOTYPE_EDITS
	echo "Building depend file..."
	touch depend

	## Build space file
	echo "Building space file..."
	cat > space << _EOF
	# extra space required by start/stop links added by installf in postinstall
	$TEST_DIR/etc/rc0.d/${SYSVINITSTOPT}${SYSVINIT_NAME} 0 1
	$TEST_DIR/etc/rc2.d/${SYSVINITSTART}${SYSVINIT_NAME} 0 1
	_EOF
	[ "$RC1_D" = no ] \|\| \
	echo "$TEST_DIR/etc/rc1.d/${SYSVINITSTOPT}${SYSVINIT_NAME} 0 1" >> space
	[ "$RCS_D" = yes ] && \
	echo "$TEST_DIR/etc/rcS.d/${SYSVINITSTOPT}${SYSVINIT_NAME} 0 1" >> space

	## Build preinstall file
	echo "Building preinstall file..."
	cat > preinstall << _EOF
	#! ${SCRIPT_SHELL}
	#
	_EOF

	# local preinstall changes here
	[ -s "${PKG_PREINSTALL_LOCAL}" ] && . ${PKG_PREINSTALL_LOCAL}

	cat >> preinstall << _EOF
	#
	[ "\${PRE_INS_STOP}" = "yes" ] && ${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} stop
	exit 0
	_EOF

	## Build postinstall file
	echo "Building postinstall file..."
	cat > postinstall << _EOF
	#! ${SCRIPT_SHELL}
	#
	[ -f \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_config ] \|\| \\
	cp -p \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_config.default \\
	\${PKG_INSTALL_ROOT}${sysconfdir}/ssh_config
	[ -f \${PKG_INSTALL_ROOT}${sysconfdir}/sshd_config ] \|\| \\
	cp -p \${PKG_INSTALL_ROOT}${sysconfdir}/sshd_config.default \\
	\${PKG_INSTALL_ROOT}${sysconfdir}/sshd_config
	[ -f \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_prng_cmds.default ] && {
	[ -f \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_prng_cmds ] \|\| \\
	cp -p \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_prng_cmds.default \\
	\${PKG_INSTALL_ROOT}${sysconfdir}/ssh_prng_cmds
	}

	# make rc?.d dirs only if we are doing a test install
	[ -n "${TEST_DIR}" ] && {
	[ "$RCS_D" = yes ] && mkdir -p ${TEST_DIR}/etc/rcS.d
	mkdir -p ${TEST_DIR}/etc/rc0.d
	[ "$RC1_D" = no ] \|\| mkdir -p ${TEST_DIR}/etc/rc1.d
	mkdir -p ${TEST_DIR}/etc/rc2.d
	}

	if [ "\${USE_SYM_LINKS}" = yes ]
	then
	[ "$RCS_D" = yes ] && \
	installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rcS.d/${SYSVINITSTOPT}${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s
	installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc0.d/${SYSVINITSTOPT}${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s
	[ "$RC1_D" = no ] \|\| \
	installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc1.d/${SYSVINITSTOPT}${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s
	installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc2.d/${SYSVINITSTART}${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s
	else
	[ "$RCS_D" = yes ] && \
	installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rcS.d/${SYSVINITSTOPT}${SYSVINIT_NAME}=\${PKG_INSTALL_ROOT}$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l
	installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc0.d/${SYSVINITSTOPT}${SYSVINIT_NAME}=\${PKG_INSTALL_ROOT}$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l
	[ "$RC1_D" = no ] \|\| \
	installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc1.d/${SYSVINITSTOPT}${SYSVINIT_NAME}=\${PKG_INSTALL_ROOT}$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l
	installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc2.d/${SYSVINITSTART}${SYSVINIT_NAME}=\${PKG_INSTALL_ROOT}$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l
	fi

	# If piddir doesn't exist we add it. (Ie. --with-pid-dir=/var/opt/ssh)
	[ -d $piddir ] \|\| installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR$piddir d 0755 root sys

	_EOF

	# local postinstall changes here
	[ -s "${PKG_POSTINSTALL_LOCAL}" ] && . ${PKG_POSTINSTALL_LOCAL}

	cat >> postinstall << _EOF
	installf -f ${PKGNAME}

	# Use chroot to handle PKG_INSTALL_ROOT
	if [ ! -z "\${PKG_INSTALL_ROOT}" ]
	then
	chroot="chroot \${PKG_INSTALL_ROOT}"
	fi
	# If this is a test build, we will skip the groupadd/useradd/passwd commands
	if [ ! -z "${TEST_DIR}" ]
	then
	chroot=echo
	fi

	if egrep '^[ \t]*UsePrivilegeSeparation[ \t]+no' \${PKG_INSTALL_ROOT}/$sysconfdir/sshd_config >/dev/null
	then
	echo "UsePrivilegeSeparation disabled in config, not creating PrivSep user"
	echo "or group."
	else
	echo "UsePrivilegeSeparation enabled in config (or defaulting to on)."

	# user required?
	if cut -f1 -d: \${PKG_INSTALL_ROOT}/etc/passwd \| egrep '^'$SSH_PRIVSEP_USER'\$' >/dev/null
	then
	echo "PrivSep user $SSH_PRIVSEP_USER already exists."
	SSH_PRIVSEP_GROUP=\`grep "^$SSH_PRIVSEP_USER:" \${PKG_INSTALL_ROOT}/etc/passwd \| awk -F: '{print \$4}'\`
	SSH_PRIVSEP_GROUP=\`grep ":\$SSH_PRIVSEP_GROUP:" \${PKG_INSTALL_ROOT}/etc/group \| awk -F: '{print \$1}'\`
	else
	DO_PASSWD=yes
	fi
	[ -z "\$SSH_PRIVSEP_GROUP" ] && SSH_PRIVSEP_GROUP=$SSH_PRIVSEP_USER

	# group required?
	if cut -f1 -d: \${PKG_INSTALL_ROOT}/etc/group \| egrep '^'\$SSH_PRIVSEP_GROUP'\$' >/dev/null
	then
	echo "PrivSep group \$SSH_PRIVSEP_GROUP already exists."
	else
	DO_GROUP=yes
	fi

	# create group if required
	[ "\$DO_GROUP" = yes ] && {
	# Use gid of 67 if possible
	if cut -f3 -d: \${PKG_INSTALL_ROOT}/etc/group \| egrep '^'$SSHDGID'\$' >/dev/null
	then
	:
	else
	sshdgid="-g $SSHDGID"
	fi
	echo "Creating PrivSep group \$SSH_PRIVSEP_GROUP."
	\$chroot ${PATH_GROUPADD_PROG} \$sshdgid \$SSH_PRIVSEP_GROUP
	}

	# Create user if required
	[ "\$DO_PASSWD" = yes ] && {
	# Use uid of 67 if possible
	if cut -f3 -d: \${PKG_INSTALL_ROOT}/etc/passwd \| egrep '^'$SSHDUID'\$' >/dev/null
	then
	:
	else
	sshduid="-u $SSHDUID"
	fi
	echo "Creating PrivSep user $SSH_PRIVSEP_USER."
	\$chroot ${PATH_USERADD_PROG} -c 'SSHD PrivSep User' -s /bin/false -g $SSH_PRIVSEP_USER \$sshduid $SSH_PRIVSEP_USER
	\$chroot ${PATH_PASSWD_PROG} -l $SSH_PRIVSEP_USER
	}
	fi

	[ "\${POST_INS_START}" = "yes" ] && ${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} start
	exit 0
	_EOF

	## Build preremove file
	echo "Building preremove file..."
	cat > preremove << _EOF
	#! ${SCRIPT_SHELL}
	#
	${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} stop
	_EOF

	# local preremove changes here
	[ -s "${PKG_PREREMOVE_LOCAL}" ] && . ${PKG_PREREMOVE_LOCAL}

	cat >> preremove << _EOF
	exit 0
	_EOF

	## Build postremove file
	echo "Building postremove file..."
	cat > postremove << _EOF
	#! ${SCRIPT_SHELL}
	#
	_EOF

	# local postremove changes here
	[ -s "${PKG_POSTREMOVE_LOCAL}" ] && . ${PKG_POSTREMOVE_LOCAL}

	cat >> postremove << _EOF
	exit 0
	_EOF

	## Build request file
	echo "Building request file..."
	cat > request << _EOF
	trap 'exit 3' 15

	_EOF

	[ -x /usr/bin/ckyorn ] \|\| cat >> request << _EOF

	ckyorn() {
	# for some strange reason OpenServer has no ckyorn
	# We build a striped down version here

	DEFAULT=n
	PROMPT="Yes or No [yes,no,?,quit]"
	HELP_PROMPT=" Enter y or yes if your answer is yes; n or no if your answer is no."
	USAGE="usage: ckyorn [options]
	where options may include:
	-d default
	-h help
	-p prompt
	"

	if [ \$# != 0 ]
	then
	while getopts d:p:h: c
	do
	case \$c in
	h) HELP_PROMPT="\$OPTARG" ;;
	d) DEFAULT=\$OPTARG ;;
	p) PROMPT=\$OPTARG ;;
	\\?) echo "\$USAGE" 1>&2
	exit 1 ;;
	esac
	done
	shift \`expr \$OPTIND - 1\`
	fi

	while true
	do
	echo "\${PROMPT}\\c " 1>&2
	read key
	[ -z "\$key" ] && key=\$DEFAULT
	case \$key in
	[n,N]\|[n,N][o,O]\|[y,Y]\|[y,Y][e,E][s,S]) echo "\${key}\\c"
	exit 0 ;;
	\\?) echo \$HELP_PROMPT 1>&2 ;;
	q\|quit) echo "q\\c" 1>&2
	exit 3 ;;
	esac
	done

	}

	_EOF

	cat >> request << _EOF
	USE_SYM_LINKS=no
	PRE_INS_STOP=no
	POST_INS_START=no
	# Use symbolic links?
	ans=\`ckyorn -d n \
	-p "Do you want symbolic links for the start/stop scripts? ${DEF_MSG}"\` \|\| exit \$?
	case \$ans in
	[y,Y]*) USE_SYM_LINKS=yes ;;
	esac

	# determine if should restart the daemon
	if [ -s ${piddir}/sshd.pid -a -f ${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} ]
	then
	ans=\`ckyorn -d n \
	-p "Should the running sshd daemon be restarted? ${DEF_MSG}"\` \|\| exit \$?
	case \$ans in
	[y,Y]*) PRE_INS_STOP=yes
	POST_INS_START=yes
	;;
	esac

	else

	# determine if we should start sshd
	ans=\`ckyorn -d n \
	-p "Start the sshd daemon after installing this package? ${DEF_MSG}"\` \|\| exit \$?
	case \$ans in
	[y,Y]*) POST_INS_START=yes ;;
	esac
	fi

	# make parameters available to installation service,
	# and so to any other packaging scripts
	cat >\$1 <<!
	USE_SYM_LINKS='\$USE_SYM_LINKS'
	PRE_INS_STOP='\$PRE_INS_STOP'
	POST_INS_START='\$POST_INS_START'
	!

	_EOF

	# local request changes here
	[ -s "${PKG_REQUEST_LOCAL}" ] && . ${PKG_REQUEST_LOCAL}

	cat >> request << _EOF
	exit 0

	_EOF

	## Next Build our prototype
	echo "Building prototype file..."
	cat >mk-proto.awk << _EOF
	BEGIN { print "i pkginfo"; print "i depend"; \\
	print "i preinstall"; print "i postinstall"; \\
	print "i preremove"; print "i postremove"; \\
	print "i request"; print "i space"; \\
	split("$SYSTEM_DIR",sys_files); }
	{
	for (dir in sys_files) { if ( \$3 != sys_files[dir] )
	{ if ( \$1 == "s" )
	{ \$5=""; \$6=""; }
	else
	{ \$5="root"; \$6="sys"; }
	}
	else
	{ \$4="?"; \$5="?"; \$6="?"; break;}
	} }
	{ print; }
	_EOF

	find . \| egrep -v "prototype\|pkginfo\|mk-proto.awk" \| sort \| \
	pkgproto $PROTO_ARGS \| nawk -f mk-proto.awk > prototype

	# /usr/local is a symlink on some systems
	[ "${USR_LOCAL_IS_SYMLINK}" = yes ] && {
	grep -v "^d none /usr/local ? ? ?$" prototype > prototype.new
	mv prototype.new prototype
	}

	## Step back a directory and now build the package.
	cd ..
	# local prototype tweeks here
	[ -s "${POST_PROTOTYPE_EDITS}" ] && . ${POST_PROTOTYPE_EDITS}

	echo "Building package.."
	pkgmk -d ${FAKE_ROOT} -f $FAKE_ROOT/prototype -o
	echo \| pkgtrans -os ${FAKE_ROOT} ${START}/$PKGNAME-$VERSION$REV-$UNAME_S-$ARCH.pkg
	;;

	justpkg.sh)
	rm -fr ${FAKE_ROOT}/${PKGNAME}
	grep -v "^PSTAMP=" $FAKE_ROOT/pkginfo > $$tmp
	mv $$tmp $FAKE_ROOT/pkginfo
	cat >> $FAKE_ROOT/pkginfo << _EOF
	PSTAMP="${UNAME_S} ${OS_VER} ${ARCH} `date '+%d%b%Y %H:%M'`"
	_EOF
	pkgmk -d ${FAKE_ROOT} -f $FAKE_ROOT/prototype -o
	echo \| pkgtrans -os ${FAKE_ROOT} ${START}/$PKGNAME-$VERSION$REV-$UNAME_S-$ARCH.pkg
	;;

	esac

	[ "${REMOVE_FAKE_ROOT_WHEN_DONE}" = yes ] && rm -rf $FAKE_ROOT
	exit 0