|  | /* $OpenBSD: packet.c,v 1.193 2014/04/01 05:32:57 djm Exp $ */ | 
|  | /* | 
|  | * Author: Tatu Ylonen <ylo@cs.hut.fi> | 
|  | * Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland | 
|  | *                    All rights reserved | 
|  | * This file contains code implementing the packet protocol and communication | 
|  | * with the other side.  This same code is used both on client and server side. | 
|  | * | 
|  | * As far as I am concerned, the code I have written for this software | 
|  | * can be used freely for any purpose.  Any derived versions of this | 
|  | * software must be clearly marked as such, and if the derived work is | 
|  | * incompatible with the protocol description in the RFC file, it must be | 
|  | * called by a name other than "ssh" or "Secure Shell". | 
|  | * | 
|  | * | 
|  | * SSH2 packet format added by Markus Friedl. | 
|  | * Copyright (c) 2000, 2001 Markus Friedl.  All rights reserved. | 
|  | * | 
|  | * Redistribution and use in source and binary forms, with or without | 
|  | * modification, are permitted provided that the following conditions | 
|  | * are met: | 
|  | * 1. Redistributions of source code must retain the above copyright | 
|  | *    notice, this list of conditions and the following disclaimer. | 
|  | * 2. Redistributions in binary form must reproduce the above copyright | 
|  | *    notice, this list of conditions and the following disclaimer in the | 
|  | *    documentation and/or other materials provided with the distribution. | 
|  | * | 
|  | * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR | 
|  | * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES | 
|  | * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. | 
|  | * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, | 
|  | * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT | 
|  | * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, | 
|  | * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY | 
|  | * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | 
|  | * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF | 
|  | * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | 
|  | */ | 
|  |  | 
|  | #include "includes.h" | 
|  |  | 
|  | #include <sys/types.h> | 
|  | #include "openbsd-compat/sys-queue.h" | 
|  | #include <sys/param.h> | 
|  | #include <sys/socket.h> | 
|  | #ifdef HAVE_SYS_TIME_H | 
|  | # include <sys/time.h> | 
|  | #endif | 
|  |  | 
|  | #include <netinet/in.h> | 
|  | #include <netinet/ip.h> | 
|  | #include <arpa/inet.h> | 
|  |  | 
|  | #include <errno.h> | 
|  | #include <stdarg.h> | 
|  | #include <stdio.h> | 
|  | #include <stdlib.h> | 
|  | #include <string.h> | 
|  | #include <unistd.h> | 
|  | #include <signal.h> | 
|  | #include <time.h> | 
|  |  | 
|  | #include "xmalloc.h" | 
|  | #include "buffer.h" | 
|  | #include "packet.h" | 
|  | #include "crc32.h" | 
|  | #include "compress.h" | 
|  | #include "deattack.h" | 
|  | #include "channels.h" | 
|  | #include "compat.h" | 
|  | #include "ssh1.h" | 
|  | #include "ssh2.h" | 
|  | #include "cipher.h" | 
|  | #include "key.h" | 
|  | #include "kex.h" | 
|  | #include "mac.h" | 
|  | #include "log.h" | 
|  | #include "canohost.h" | 
|  | #include "misc.h" | 
|  | #include "ssh.h" | 
|  | #include "roaming.h" | 
|  |  | 
|  | #ifdef PACKET_DEBUG | 
|  | #define DBG(x) x | 
|  | #else | 
|  | #define DBG(x) | 
|  | #endif | 
|  |  | 
|  | #define PACKET_MAX_SIZE (256 * 1024) | 
|  |  | 
|  | struct packet_state { | 
|  | u_int32_t seqnr; | 
|  | u_int32_t packets; | 
|  | u_int64_t blocks; | 
|  | u_int64_t bytes; | 
|  | }; | 
|  |  | 
|  | struct packet { | 
|  | TAILQ_ENTRY(packet) next; | 
|  | u_char type; | 
|  | Buffer payload; | 
|  | }; | 
|  |  | 
|  | struct session_state { | 
|  | /* | 
|  | * This variable contains the file descriptors used for | 
|  | * communicating with the other side.  connection_in is used for | 
|  | * reading; connection_out for writing.  These can be the same | 
|  | * descriptor, in which case it is assumed to be a socket. | 
|  | */ | 
|  | int connection_in; | 
|  | int connection_out; | 
|  |  | 
|  | /* Protocol flags for the remote side. */ | 
|  | u_int remote_protocol_flags; | 
|  |  | 
|  | /* Encryption context for receiving data.  Only used for decryption. */ | 
|  | CipherContext receive_context; | 
|  |  | 
|  | /* Encryption context for sending data.  Only used for encryption. */ | 
|  | CipherContext send_context; | 
|  |  | 
|  | /* Buffer for raw input data from the socket. */ | 
|  | Buffer input; | 
|  |  | 
|  | /* Buffer for raw output data going to the socket. */ | 
|  | Buffer output; | 
|  |  | 
|  | /* Buffer for the partial outgoing packet being constructed. */ | 
|  | Buffer outgoing_packet; | 
|  |  | 
|  | /* Buffer for the incoming packet currently being processed. */ | 
|  | Buffer incoming_packet; | 
|  |  | 
|  | /* Scratch buffer for packet compression/decompression. */ | 
|  | Buffer compression_buffer; | 
|  | int compression_buffer_ready; | 
|  |  | 
|  | /* | 
|  | * Flag indicating whether packet compression/decompression is | 
|  | * enabled. | 
|  | */ | 
|  | int packet_compression; | 
|  |  | 
|  | /* default maximum packet size */ | 
|  | u_int max_packet_size; | 
|  |  | 
|  | /* Flag indicating whether this module has been initialized. */ | 
|  | int initialized; | 
|  |  | 
|  | /* Set to true if the connection is interactive. */ | 
|  | int interactive_mode; | 
|  |  | 
|  | /* Set to true if we are the server side. */ | 
|  | int server_side; | 
|  |  | 
|  | /* Set to true if we are authenticated. */ | 
|  | int after_authentication; | 
|  |  | 
|  | int keep_alive_timeouts; | 
|  |  | 
|  | /* The maximum time that we will wait to send or receive a packet */ | 
|  | int packet_timeout_ms; | 
|  |  | 
|  | /* Session key information for Encryption and MAC */ | 
|  | Newkeys *newkeys[MODE_MAX]; | 
|  | struct packet_state p_read, p_send; | 
|  |  | 
|  | /* Volume-based rekeying */ | 
|  | u_int64_t max_blocks_in, max_blocks_out; | 
|  | u_int32_t rekey_limit; | 
|  |  | 
|  | /* Time-based rekeying */ | 
|  | time_t rekey_interval;	/* how often in seconds */ | 
|  | time_t rekey_time;	/* time of last rekeying */ | 
|  |  | 
|  | /* Session key for protocol v1 */ | 
|  | u_char ssh1_key[SSH_SESSION_KEY_LENGTH]; | 
|  | u_int ssh1_keylen; | 
|  |  | 
|  | /* roundup current message to extra_pad bytes */ | 
|  | u_char extra_pad; | 
|  |  | 
|  | /* XXX discard incoming data after MAC error */ | 
|  | u_int packet_discard; | 
|  | Mac *packet_discard_mac; | 
|  |  | 
|  | /* Used in packet_read_poll2() */ | 
|  | u_int packlen; | 
|  |  | 
|  | /* Used in packet_send2 */ | 
|  | int rekeying; | 
|  |  | 
|  | /* Used in packet_set_interactive */ | 
|  | int set_interactive_called; | 
|  |  | 
|  | /* Used in packet_set_maxsize */ | 
|  | int set_maxsize_called; | 
|  |  | 
|  | TAILQ_HEAD(, packet) outgoing; | 
|  | }; | 
|  |  | 
|  | static struct session_state *active_state, *backup_state; | 
|  |  | 
|  | static struct session_state * | 
|  | alloc_session_state(void) | 
|  | { | 
|  | struct session_state *s = xcalloc(1, sizeof(*s)); | 
|  |  | 
|  | s->connection_in = -1; | 
|  | s->connection_out = -1; | 
|  | s->max_packet_size = 32768; | 
|  | s->packet_timeout_ms = -1; | 
|  | return s; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Sets the descriptors used for communication.  Disables encryption until | 
|  | * packet_set_encryption_key is called. | 
|  | */ | 
|  | void | 
|  | packet_set_connection(int fd_in, int fd_out) | 
|  | { | 
|  | const Cipher *none = cipher_by_name("none"); | 
|  |  | 
|  | if (none == NULL) | 
|  | fatal("packet_set_connection: cannot load cipher 'none'"); | 
|  | if (active_state == NULL) | 
|  | active_state = alloc_session_state(); | 
|  | active_state->connection_in = fd_in; | 
|  | active_state->connection_out = fd_out; | 
|  | cipher_init(&active_state->send_context, none, (const u_char *)"", | 
|  | 0, NULL, 0, CIPHER_ENCRYPT); | 
|  | cipher_init(&active_state->receive_context, none, (const u_char *)"", | 
|  | 0, NULL, 0, CIPHER_DECRYPT); | 
|  | active_state->newkeys[MODE_IN] = active_state->newkeys[MODE_OUT] = NULL; | 
|  | if (!active_state->initialized) { | 
|  | active_state->initialized = 1; | 
|  | buffer_init(&active_state->input); | 
|  | buffer_init(&active_state->output); | 
|  | buffer_init(&active_state->outgoing_packet); | 
|  | buffer_init(&active_state->incoming_packet); | 
|  | TAILQ_INIT(&active_state->outgoing); | 
|  | active_state->p_send.packets = active_state->p_read.packets = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | void | 
|  | packet_set_timeout(int timeout, int count) | 
|  | { | 
|  | if (timeout <= 0 || count <= 0) { | 
|  | active_state->packet_timeout_ms = -1; | 
|  | return; | 
|  | } | 
|  | if ((INT_MAX / 1000) / count < timeout) | 
|  | active_state->packet_timeout_ms = INT_MAX; | 
|  | else | 
|  | active_state->packet_timeout_ms = timeout * count * 1000; | 
|  | } | 
|  |  | 
|  | static void | 
|  | packet_stop_discard(void) | 
|  | { | 
|  | if (active_state->packet_discard_mac) { | 
|  | char buf[1024]; | 
|  |  | 
|  | memset(buf, 'a', sizeof(buf)); | 
|  | while (buffer_len(&active_state->incoming_packet) < | 
|  | PACKET_MAX_SIZE) | 
|  | buffer_append(&active_state->incoming_packet, buf, | 
|  | sizeof(buf)); | 
|  | (void) mac_compute(active_state->packet_discard_mac, | 
|  | active_state->p_read.seqnr, | 
|  | buffer_ptr(&active_state->incoming_packet), | 
|  | PACKET_MAX_SIZE); | 
|  | } | 
|  | logit("Finished discarding for %.200s", get_remote_ipaddr()); | 
|  | cleanup_exit(255); | 
|  | } | 
|  |  | 
|  | static void | 
|  | packet_start_discard(Enc *enc, Mac *mac, u_int packet_length, u_int discard) | 
|  | { | 
|  | if (enc == NULL || !cipher_is_cbc(enc->cipher) || (mac && mac->etm)) | 
|  | packet_disconnect("Packet corrupt"); | 
|  | if (packet_length != PACKET_MAX_SIZE && mac && mac->enabled) | 
|  | active_state->packet_discard_mac = mac; | 
|  | if (buffer_len(&active_state->input) >= discard) | 
|  | packet_stop_discard(); | 
|  | active_state->packet_discard = discard - | 
|  | buffer_len(&active_state->input); | 
|  | } | 
|  |  | 
|  | /* Returns 1 if remote host is connected via socket, 0 if not. */ | 
|  |  | 
|  | int | 
|  | packet_connection_is_on_socket(void) | 
|  | { | 
|  | struct sockaddr_storage from, to; | 
|  | socklen_t fromlen, tolen; | 
|  |  | 
|  | /* filedescriptors in and out are the same, so it's a socket */ | 
|  | if (active_state->connection_in == active_state->connection_out) | 
|  | return 1; | 
|  | fromlen = sizeof(from); | 
|  | memset(&from, 0, sizeof(from)); | 
|  | if (getpeername(active_state->connection_in, (struct sockaddr *)&from, | 
|  | &fromlen) < 0) | 
|  | return 0; | 
|  | tolen = sizeof(to); | 
|  | memset(&to, 0, sizeof(to)); | 
|  | if (getpeername(active_state->connection_out, (struct sockaddr *)&to, | 
|  | &tolen) < 0) | 
|  | return 0; | 
|  | if (fromlen != tolen || memcmp(&from, &to, fromlen) != 0) | 
|  | return 0; | 
|  | if (from.ss_family != AF_INET && from.ss_family != AF_INET6) | 
|  | return 0; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Exports an IV from the CipherContext required to export the key | 
|  | * state back from the unprivileged child to the privileged parent | 
|  | * process. | 
|  | */ | 
|  |  | 
|  | void | 
|  | packet_get_keyiv(int mode, u_char *iv, u_int len) | 
|  | { | 
|  | CipherContext *cc; | 
|  |  | 
|  | if (mode == MODE_OUT) | 
|  | cc = &active_state->send_context; | 
|  | else | 
|  | cc = &active_state->receive_context; | 
|  |  | 
|  | cipher_get_keyiv(cc, iv, len); | 
|  | } | 
|  |  | 
|  | int | 
|  | packet_get_keycontext(int mode, u_char *dat) | 
|  | { | 
|  | CipherContext *cc; | 
|  |  | 
|  | if (mode == MODE_OUT) | 
|  | cc = &active_state->send_context; | 
|  | else | 
|  | cc = &active_state->receive_context; | 
|  |  | 
|  | return (cipher_get_keycontext(cc, dat)); | 
|  | } | 
|  |  | 
|  | void | 
|  | packet_set_keycontext(int mode, u_char *dat) | 
|  | { | 
|  | CipherContext *cc; | 
|  |  | 
|  | if (mode == MODE_OUT) | 
|  | cc = &active_state->send_context; | 
|  | else | 
|  | cc = &active_state->receive_context; | 
|  |  | 
|  | cipher_set_keycontext(cc, dat); | 
|  | } | 
|  |  | 
|  | int | 
|  | packet_get_keyiv_len(int mode) | 
|  | { | 
|  | CipherContext *cc; | 
|  |  | 
|  | if (mode == MODE_OUT) | 
|  | cc = &active_state->send_context; | 
|  | else | 
|  | cc = &active_state->receive_context; | 
|  |  | 
|  | return (cipher_get_keyiv_len(cc)); | 
|  | } | 
|  |  | 
|  | void | 
|  | packet_set_iv(int mode, u_char *dat) | 
|  | { | 
|  | CipherContext *cc; | 
|  |  | 
|  | if (mode == MODE_OUT) | 
|  | cc = &active_state->send_context; | 
|  | else | 
|  | cc = &active_state->receive_context; | 
|  |  | 
|  | cipher_set_keyiv(cc, dat); | 
|  | } | 
|  |  | 
|  | int | 
|  | packet_get_ssh1_cipher(void) | 
|  | { | 
|  | return (cipher_get_number(active_state->receive_context.cipher)); | 
|  | } | 
|  |  | 
|  | void | 
|  | packet_get_state(int mode, u_int32_t *seqnr, u_int64_t *blocks, | 
|  | u_int32_t *packets, u_int64_t *bytes) | 
|  | { | 
|  | struct packet_state *state; | 
|  |  | 
|  | state = (mode == MODE_IN) ? | 
|  | &active_state->p_read : &active_state->p_send; | 
|  | if (seqnr) | 
|  | *seqnr = state->seqnr; | 
|  | if (blocks) | 
|  | *blocks = state->blocks; | 
|  | if (packets) | 
|  | *packets = state->packets; | 
|  | if (bytes) | 
|  | *bytes = state->bytes; | 
|  | } | 
|  |  | 
|  | void | 
|  | packet_set_state(int mode, u_int32_t seqnr, u_int64_t blocks, u_int32_t packets, | 
|  | u_int64_t bytes) | 
|  | { | 
|  | struct packet_state *state; | 
|  |  | 
|  | state = (mode == MODE_IN) ? | 
|  | &active_state->p_read : &active_state->p_send; | 
|  | state->seqnr = seqnr; | 
|  | state->blocks = blocks; | 
|  | state->packets = packets; | 
|  | state->bytes = bytes; | 
|  | } | 
|  |  | 
|  | static int | 
|  | packet_connection_af(void) | 
|  | { | 
|  | struct sockaddr_storage to; | 
|  | socklen_t tolen = sizeof(to); | 
|  |  | 
|  | memset(&to, 0, sizeof(to)); | 
|  | if (getsockname(active_state->connection_out, (struct sockaddr *)&to, | 
|  | &tolen) < 0) | 
|  | return 0; | 
|  | #ifdef IPV4_IN_IPV6 | 
|  | if (to.ss_family == AF_INET6 && | 
|  | IN6_IS_ADDR_V4MAPPED(&((struct sockaddr_in6 *)&to)->sin6_addr)) | 
|  | return AF_INET; | 
|  | #endif | 
|  | return to.ss_family; | 
|  | } | 
|  |  | 
|  | /* Sets the connection into non-blocking mode. */ | 
|  |  | 
|  | void | 
|  | packet_set_nonblocking(void) | 
|  | { | 
|  | /* Set the socket into non-blocking mode. */ | 
|  | set_nonblock(active_state->connection_in); | 
|  |  | 
|  | if (active_state->connection_out != active_state->connection_in) | 
|  | set_nonblock(active_state->connection_out); | 
|  | } | 
|  |  | 
|  | /* Returns the socket used for reading. */ | 
|  |  | 
|  | int | 
|  | packet_get_connection_in(void) | 
|  | { | 
|  | return active_state->connection_in; | 
|  | } | 
|  |  | 
|  | /* Returns the descriptor used for writing. */ | 
|  |  | 
|  | int | 
|  | packet_get_connection_out(void) | 
|  | { | 
|  | return active_state->connection_out; | 
|  | } | 
|  |  | 
|  | /* Closes the connection and clears and frees internal data structures. */ | 
|  |  | 
|  | void | 
|  | packet_close(void) | 
|  | { | 
|  | if (!active_state->initialized) | 
|  | return; | 
|  | active_state->initialized = 0; | 
|  | if (active_state->connection_in == active_state->connection_out) { | 
|  | shutdown(active_state->connection_out, SHUT_RDWR); | 
|  | close(active_state->connection_out); | 
|  | } else { | 
|  | close(active_state->connection_in); | 
|  | close(active_state->connection_out); | 
|  | } | 
|  | buffer_free(&active_state->input); | 
|  | buffer_free(&active_state->output); | 
|  | buffer_free(&active_state->outgoing_packet); | 
|  | buffer_free(&active_state->incoming_packet); | 
|  | if (active_state->compression_buffer_ready) { | 
|  | buffer_free(&active_state->compression_buffer); | 
|  | buffer_compress_uninit(); | 
|  | } | 
|  | cipher_cleanup(&active_state->send_context); | 
|  | cipher_cleanup(&active_state->receive_context); | 
|  | } | 
|  |  | 
|  | /* Sets remote side protocol flags. */ | 
|  |  | 
|  | void | 
|  | packet_set_protocol_flags(u_int protocol_flags) | 
|  | { | 
|  | active_state->remote_protocol_flags = protocol_flags; | 
|  | } | 
|  |  | 
|  | /* Returns the remote protocol flags set earlier by the above function. */ | 
|  |  | 
|  | u_int | 
|  | packet_get_protocol_flags(void) | 
|  | { | 
|  | return active_state->remote_protocol_flags; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Starts packet compression from the next packet on in both directions. | 
|  | * Level is compression level 1 (fastest) - 9 (slow, best) as in gzip. | 
|  | */ | 
|  |  | 
|  | static void | 
|  | packet_init_compression(void) | 
|  | { | 
|  | if (active_state->compression_buffer_ready == 1) | 
|  | return; | 
|  | active_state->compression_buffer_ready = 1; | 
|  | buffer_init(&active_state->compression_buffer); | 
|  | } | 
|  |  | 
|  | void | 
|  | packet_start_compression(int level) | 
|  | { | 
|  | if (active_state->packet_compression && !compat20) | 
|  | fatal("Compression already enabled."); | 
|  | active_state->packet_compression = 1; | 
|  | packet_init_compression(); | 
|  | buffer_compress_init_send(level); | 
|  | buffer_compress_init_recv(); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Causes any further packets to be encrypted using the given key.  The same | 
|  | * key is used for both sending and reception.  However, both directions are | 
|  | * encrypted independently of each other. | 
|  | */ | 
|  |  | 
|  | void | 
|  | packet_set_encryption_key(const u_char *key, u_int keylen, int number) | 
|  | { | 
|  | const Cipher *cipher = cipher_by_number(number); | 
|  |  | 
|  | if (cipher == NULL) | 
|  | fatal("packet_set_encryption_key: unknown cipher number %d", number); | 
|  | if (keylen < 20) | 
|  | fatal("packet_set_encryption_key: keylen too small: %d", keylen); | 
|  | if (keylen > SSH_SESSION_KEY_LENGTH) | 
|  | fatal("packet_set_encryption_key: keylen too big: %d", keylen); | 
|  | memcpy(active_state->ssh1_key, key, keylen); | 
|  | active_state->ssh1_keylen = keylen; | 
|  | cipher_init(&active_state->send_context, cipher, key, keylen, NULL, | 
|  | 0, CIPHER_ENCRYPT); | 
|  | cipher_init(&active_state->receive_context, cipher, key, keylen, NULL, | 
|  | 0, CIPHER_DECRYPT); | 
|  | } | 
|  |  | 
|  | u_int | 
|  | packet_get_encryption_key(u_char *key) | 
|  | { | 
|  | if (key == NULL) | 
|  | return (active_state->ssh1_keylen); | 
|  | memcpy(key, active_state->ssh1_key, active_state->ssh1_keylen); | 
|  | return (active_state->ssh1_keylen); | 
|  | } | 
|  |  | 
|  | /* Start constructing a packet to send. */ | 
|  | void | 
|  | packet_start(u_char type) | 
|  | { | 
|  | u_char buf[9]; | 
|  | int len; | 
|  |  | 
|  | DBG(debug("packet_start[%d]", type)); | 
|  | len = compat20 ? 6 : 9; | 
|  | memset(buf, 0, len - 1); | 
|  | buf[len - 1] = type; | 
|  | buffer_clear(&active_state->outgoing_packet); | 
|  | buffer_append(&active_state->outgoing_packet, buf, len); | 
|  | } | 
|  |  | 
|  | /* Append payload. */ | 
|  | void | 
|  | packet_put_char(int value) | 
|  | { | 
|  | char ch = value; | 
|  |  | 
|  | buffer_append(&active_state->outgoing_packet, &ch, 1); | 
|  | } | 
|  |  | 
|  | void | 
|  | packet_put_int(u_int value) | 
|  | { | 
|  | buffer_put_int(&active_state->outgoing_packet, value); | 
|  | } | 
|  |  | 
|  | void | 
|  | packet_put_int64(u_int64_t value) | 
|  | { | 
|  | buffer_put_int64(&active_state->outgoing_packet, value); | 
|  | } | 
|  |  | 
|  | void | 
|  | packet_put_string(const void *buf, u_int len) | 
|  | { | 
|  | buffer_put_string(&active_state->outgoing_packet, buf, len); | 
|  | } | 
|  |  | 
|  | void | 
|  | packet_put_cstring(const char *str) | 
|  | { | 
|  | buffer_put_cstring(&active_state->outgoing_packet, str); | 
|  | } | 
|  |  | 
|  | void | 
|  | packet_put_raw(const void *buf, u_int len) | 
|  | { | 
|  | buffer_append(&active_state->outgoing_packet, buf, len); | 
|  | } | 
|  |  | 
|  | void | 
|  | packet_put_bignum(BIGNUM * value) | 
|  | { | 
|  | buffer_put_bignum(&active_state->outgoing_packet, value); | 
|  | } | 
|  |  | 
|  | void | 
|  | packet_put_bignum2(BIGNUM * value) | 
|  | { | 
|  | buffer_put_bignum2(&active_state->outgoing_packet, value); | 
|  | } | 
|  |  | 
|  | #ifdef OPENSSL_HAS_ECC | 
|  | void | 
|  | packet_put_ecpoint(const EC_GROUP *curve, const EC_POINT *point) | 
|  | { | 
|  | buffer_put_ecpoint(&active_state->outgoing_packet, curve, point); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * Finalizes and sends the packet.  If the encryption key has been set, | 
|  | * encrypts the packet before sending. | 
|  | */ | 
|  |  | 
|  | static void | 
|  | packet_send1(void) | 
|  | { | 
|  | u_char buf[8], *cp; | 
|  | int i, padding, len; | 
|  | u_int checksum; | 
|  | u_int32_t rnd = 0; | 
|  |  | 
|  | /* | 
|  | * If using packet compression, compress the payload of the outgoing | 
|  | * packet. | 
|  | */ | 
|  | if (active_state->packet_compression) { | 
|  | buffer_clear(&active_state->compression_buffer); | 
|  | /* Skip padding. */ | 
|  | buffer_consume(&active_state->outgoing_packet, 8); | 
|  | /* padding */ | 
|  | buffer_append(&active_state->compression_buffer, | 
|  | "\0\0\0\0\0\0\0\0", 8); | 
|  | buffer_compress(&active_state->outgoing_packet, | 
|  | &active_state->compression_buffer); | 
|  | buffer_clear(&active_state->outgoing_packet); | 
|  | buffer_append(&active_state->outgoing_packet, | 
|  | buffer_ptr(&active_state->compression_buffer), | 
|  | buffer_len(&active_state->compression_buffer)); | 
|  | } | 
|  | /* Compute packet length without padding (add checksum, remove padding). */ | 
|  | len = buffer_len(&active_state->outgoing_packet) + 4 - 8; | 
|  |  | 
|  | /* Insert padding. Initialized to zero in packet_start1() */ | 
|  | padding = 8 - len % 8; | 
|  | if (!active_state->send_context.plaintext) { | 
|  | cp = buffer_ptr(&active_state->outgoing_packet); | 
|  | for (i = 0; i < padding; i++) { | 
|  | if (i % 4 == 0) | 
|  | rnd = arc4random(); | 
|  | cp[7 - i] = rnd & 0xff; | 
|  | rnd >>= 8; | 
|  | } | 
|  | } | 
|  | buffer_consume(&active_state->outgoing_packet, 8 - padding); | 
|  |  | 
|  | /* Add check bytes. */ | 
|  | checksum = ssh_crc32(buffer_ptr(&active_state->outgoing_packet), | 
|  | buffer_len(&active_state->outgoing_packet)); | 
|  | put_u32(buf, checksum); | 
|  | buffer_append(&active_state->outgoing_packet, buf, 4); | 
|  |  | 
|  | #ifdef PACKET_DEBUG | 
|  | fprintf(stderr, "packet_send plain: "); | 
|  | buffer_dump(&active_state->outgoing_packet); | 
|  | #endif | 
|  |  | 
|  | /* Append to output. */ | 
|  | put_u32(buf, len); | 
|  | buffer_append(&active_state->output, buf, 4); | 
|  | cp = buffer_append_space(&active_state->output, | 
|  | buffer_len(&active_state->outgoing_packet)); | 
|  | if (cipher_crypt(&active_state->send_context, 0, cp, | 
|  | buffer_ptr(&active_state->outgoing_packet), | 
|  | buffer_len(&active_state->outgoing_packet), 0, 0) != 0) | 
|  | fatal("%s: cipher_crypt failed", __func__); | 
|  |  | 
|  | #ifdef PACKET_DEBUG | 
|  | fprintf(stderr, "encrypted: "); | 
|  | buffer_dump(&active_state->output); | 
|  | #endif | 
|  | active_state->p_send.packets++; | 
|  | active_state->p_send.bytes += len + | 
|  | buffer_len(&active_state->outgoing_packet); | 
|  | buffer_clear(&active_state->outgoing_packet); | 
|  |  | 
|  | /* | 
|  | * Note that the packet is now only buffered in output.  It won't be | 
|  | * actually sent until packet_write_wait or packet_write_poll is | 
|  | * called. | 
|  | */ | 
|  | } | 
|  |  | 
|  | void | 
|  | set_newkeys(int mode) | 
|  | { | 
|  | Enc *enc; | 
|  | Mac *mac; | 
|  | Comp *comp; | 
|  | CipherContext *cc; | 
|  | u_int64_t *max_blocks; | 
|  | int crypt_type; | 
|  |  | 
|  | debug2("set_newkeys: mode %d", mode); | 
|  |  | 
|  | if (mode == MODE_OUT) { | 
|  | cc = &active_state->send_context; | 
|  | crypt_type = CIPHER_ENCRYPT; | 
|  | active_state->p_send.packets = active_state->p_send.blocks = 0; | 
|  | max_blocks = &active_state->max_blocks_out; | 
|  | } else { | 
|  | cc = &active_state->receive_context; | 
|  | crypt_type = CIPHER_DECRYPT; | 
|  | active_state->p_read.packets = active_state->p_read.blocks = 0; | 
|  | max_blocks = &active_state->max_blocks_in; | 
|  | } | 
|  | if (active_state->newkeys[mode] != NULL) { | 
|  | debug("set_newkeys: rekeying"); | 
|  | cipher_cleanup(cc); | 
|  | enc  = &active_state->newkeys[mode]->enc; | 
|  | mac  = &active_state->newkeys[mode]->mac; | 
|  | comp = &active_state->newkeys[mode]->comp; | 
|  | mac_clear(mac); | 
|  | explicit_bzero(enc->iv,  enc->iv_len); | 
|  | explicit_bzero(enc->key, enc->key_len); | 
|  | explicit_bzero(mac->key, mac->key_len); | 
|  | free(enc->name); | 
|  | free(enc->iv); | 
|  | free(enc->key); | 
|  | free(mac->name); | 
|  | free(mac->key); | 
|  | free(comp->name); | 
|  | free(active_state->newkeys[mode]); | 
|  | } | 
|  | active_state->newkeys[mode] = kex_get_newkeys(mode); | 
|  | if (active_state->newkeys[mode] == NULL) | 
|  | fatal("newkeys: no keys for mode %d", mode); | 
|  | enc  = &active_state->newkeys[mode]->enc; | 
|  | mac  = &active_state->newkeys[mode]->mac; | 
|  | comp = &active_state->newkeys[mode]->comp; | 
|  | if (cipher_authlen(enc->cipher) == 0 && mac_init(mac) == 0) | 
|  | mac->enabled = 1; | 
|  | DBG(debug("cipher_init_context: %d", mode)); | 
|  | cipher_init(cc, enc->cipher, enc->key, enc->key_len, | 
|  | enc->iv, enc->iv_len, crypt_type); | 
|  | /* Deleting the keys does not gain extra security */ | 
|  | /* explicit_bzero(enc->iv,  enc->block_size); | 
|  | explicit_bzero(enc->key, enc->key_len); | 
|  | explicit_bzero(mac->key, mac->key_len); */ | 
|  | if ((comp->type == COMP_ZLIB || | 
|  | (comp->type == COMP_DELAYED && | 
|  | active_state->after_authentication)) && comp->enabled == 0) { | 
|  | packet_init_compression(); | 
|  | if (mode == MODE_OUT) | 
|  | buffer_compress_init_send(6); | 
|  | else | 
|  | buffer_compress_init_recv(); | 
|  | comp->enabled = 1; | 
|  | } | 
|  | /* | 
|  | * The 2^(blocksize*2) limit is too expensive for 3DES, | 
|  | * blowfish, etc, so enforce a 1GB limit for small blocksizes. | 
|  | */ | 
|  | if (enc->block_size >= 16) | 
|  | *max_blocks = (u_int64_t)1 << (enc->block_size*2); | 
|  | else | 
|  | *max_blocks = ((u_int64_t)1 << 30) / enc->block_size; | 
|  | if (active_state->rekey_limit) | 
|  | *max_blocks = MIN(*max_blocks, | 
|  | active_state->rekey_limit / enc->block_size); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Delayed compression for SSH2 is enabled after authentication: | 
|  | * This happens on the server side after a SSH2_MSG_USERAUTH_SUCCESS is sent, | 
|  | * and on the client side after a SSH2_MSG_USERAUTH_SUCCESS is received. | 
|  | */ | 
|  | static void | 
|  | packet_enable_delayed_compress(void) | 
|  | { | 
|  | Comp *comp = NULL; | 
|  | int mode; | 
|  |  | 
|  | /* | 
|  | * Remember that we are past the authentication step, so rekeying | 
|  | * with COMP_DELAYED will turn on compression immediately. | 
|  | */ | 
|  | active_state->after_authentication = 1; | 
|  | for (mode = 0; mode < MODE_MAX; mode++) { | 
|  | /* protocol error: USERAUTH_SUCCESS received before NEWKEYS */ | 
|  | if (active_state->newkeys[mode] == NULL) | 
|  | continue; | 
|  | comp = &active_state->newkeys[mode]->comp; | 
|  | if (comp && !comp->enabled && comp->type == COMP_DELAYED) { | 
|  | packet_init_compression(); | 
|  | if (mode == MODE_OUT) | 
|  | buffer_compress_init_send(6); | 
|  | else | 
|  | buffer_compress_init_recv(); | 
|  | comp->enabled = 1; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Finalize packet in SSH2 format (compress, mac, encrypt, enqueue) | 
|  | */ | 
|  | static void | 
|  | packet_send2_wrapped(void) | 
|  | { | 
|  | u_char type, *cp, *macbuf = NULL; | 
|  | u_char padlen, pad = 0; | 
|  | u_int i, len, authlen = 0, aadlen = 0; | 
|  | u_int32_t rnd = 0; | 
|  | Enc *enc   = NULL; | 
|  | Mac *mac   = NULL; | 
|  | Comp *comp = NULL; | 
|  | int block_size; | 
|  |  | 
|  | if (active_state->newkeys[MODE_OUT] != NULL) { | 
|  | enc  = &active_state->newkeys[MODE_OUT]->enc; | 
|  | mac  = &active_state->newkeys[MODE_OUT]->mac; | 
|  | comp = &active_state->newkeys[MODE_OUT]->comp; | 
|  | /* disable mac for authenticated encryption */ | 
|  | if ((authlen = cipher_authlen(enc->cipher)) != 0) | 
|  | mac = NULL; | 
|  | } | 
|  | block_size = enc ? enc->block_size : 8; | 
|  | aadlen = (mac && mac->enabled && mac->etm) || authlen ? 4 : 0; | 
|  |  | 
|  | cp = buffer_ptr(&active_state->outgoing_packet); | 
|  | type = cp[5]; | 
|  |  | 
|  | #ifdef PACKET_DEBUG | 
|  | fprintf(stderr, "plain:     "); | 
|  | buffer_dump(&active_state->outgoing_packet); | 
|  | #endif | 
|  |  | 
|  | if (comp && comp->enabled) { | 
|  | len = buffer_len(&active_state->outgoing_packet); | 
|  | /* skip header, compress only payload */ | 
|  | buffer_consume(&active_state->outgoing_packet, 5); | 
|  | buffer_clear(&active_state->compression_buffer); | 
|  | buffer_compress(&active_state->outgoing_packet, | 
|  | &active_state->compression_buffer); | 
|  | buffer_clear(&active_state->outgoing_packet); | 
|  | buffer_append(&active_state->outgoing_packet, "\0\0\0\0\0", 5); | 
|  | buffer_append(&active_state->outgoing_packet, | 
|  | buffer_ptr(&active_state->compression_buffer), | 
|  | buffer_len(&active_state->compression_buffer)); | 
|  | DBG(debug("compression: raw %d compressed %d", len, | 
|  | buffer_len(&active_state->outgoing_packet))); | 
|  | } | 
|  |  | 
|  | /* sizeof (packet_len + pad_len + payload) */ | 
|  | len = buffer_len(&active_state->outgoing_packet); | 
|  |  | 
|  | /* | 
|  | * calc size of padding, alloc space, get random data, | 
|  | * minimum padding is 4 bytes | 
|  | */ | 
|  | len -= aadlen; /* packet length is not encrypted for EtM modes */ | 
|  | padlen = block_size - (len % block_size); | 
|  | if (padlen < 4) | 
|  | padlen += block_size; | 
|  | if (active_state->extra_pad) { | 
|  | /* will wrap if extra_pad+padlen > 255 */ | 
|  | active_state->extra_pad = | 
|  | roundup(active_state->extra_pad, block_size); | 
|  | pad = active_state->extra_pad - | 
|  | ((len + padlen) % active_state->extra_pad); | 
|  | DBG(debug3("%s: adding %d (len %d padlen %d extra_pad %d)", | 
|  | __func__, pad, len, padlen, active_state->extra_pad)); | 
|  | padlen += pad; | 
|  | active_state->extra_pad = 0; | 
|  | } | 
|  | cp = buffer_append_space(&active_state->outgoing_packet, padlen); | 
|  | if (enc && !active_state->send_context.plaintext) { | 
|  | /* random padding */ | 
|  | for (i = 0; i < padlen; i++) { | 
|  | if (i % 4 == 0) | 
|  | rnd = arc4random(); | 
|  | cp[i] = rnd & 0xff; | 
|  | rnd >>= 8; | 
|  | } | 
|  | } else { | 
|  | /* clear padding */ | 
|  | explicit_bzero(cp, padlen); | 
|  | } | 
|  | /* sizeof (packet_len + pad_len + payload + padding) */ | 
|  | len = buffer_len(&active_state->outgoing_packet); | 
|  | cp = buffer_ptr(&active_state->outgoing_packet); | 
|  | /* packet_length includes payload, padding and padding length field */ | 
|  | put_u32(cp, len - 4); | 
|  | cp[4] = padlen; | 
|  | DBG(debug("send: len %d (includes padlen %d, aadlen %d)", | 
|  | len, padlen, aadlen)); | 
|  |  | 
|  | /* compute MAC over seqnr and packet(length fields, payload, padding) */ | 
|  | if (mac && mac->enabled && !mac->etm) { | 
|  | macbuf = mac_compute(mac, active_state->p_send.seqnr, | 
|  | buffer_ptr(&active_state->outgoing_packet), len); | 
|  | DBG(debug("done calc MAC out #%d", active_state->p_send.seqnr)); | 
|  | } | 
|  | /* encrypt packet and append to output buffer. */ | 
|  | cp = buffer_append_space(&active_state->output, len + authlen); | 
|  | if (cipher_crypt(&active_state->send_context, active_state->p_send.seqnr, | 
|  | cp, buffer_ptr(&active_state->outgoing_packet), | 
|  | len - aadlen, aadlen, authlen) != 0) | 
|  | fatal("%s: cipher_crypt failed", __func__); | 
|  | /* append unencrypted MAC */ | 
|  | if (mac && mac->enabled) { | 
|  | if (mac->etm) { | 
|  | /* EtM: compute mac over aadlen + cipher text */ | 
|  | macbuf = mac_compute(mac, | 
|  | active_state->p_send.seqnr, cp, len); | 
|  | DBG(debug("done calc MAC(EtM) out #%d", | 
|  | active_state->p_send.seqnr)); | 
|  | } | 
|  | buffer_append(&active_state->output, macbuf, mac->mac_len); | 
|  | } | 
|  | #ifdef PACKET_DEBUG | 
|  | fprintf(stderr, "encrypted: "); | 
|  | buffer_dump(&active_state->output); | 
|  | #endif | 
|  | /* increment sequence number for outgoing packets */ | 
|  | if (++active_state->p_send.seqnr == 0) | 
|  | logit("outgoing seqnr wraps around"); | 
|  | if (++active_state->p_send.packets == 0) | 
|  | if (!(datafellows & SSH_BUG_NOREKEY)) | 
|  | fatal("XXX too many packets with same key"); | 
|  | active_state->p_send.blocks += len / block_size; | 
|  | active_state->p_send.bytes += len; | 
|  | buffer_clear(&active_state->outgoing_packet); | 
|  |  | 
|  | if (type == SSH2_MSG_NEWKEYS) | 
|  | set_newkeys(MODE_OUT); | 
|  | else if (type == SSH2_MSG_USERAUTH_SUCCESS && active_state->server_side) | 
|  | packet_enable_delayed_compress(); | 
|  | } | 
|  |  | 
|  | static void | 
|  | packet_send2(void) | 
|  | { | 
|  | struct packet *p; | 
|  | u_char type, *cp; | 
|  |  | 
|  | cp = buffer_ptr(&active_state->outgoing_packet); | 
|  | type = cp[5]; | 
|  |  | 
|  | /* during rekeying we can only send key exchange messages */ | 
|  | if (active_state->rekeying) { | 
|  | if ((type < SSH2_MSG_TRANSPORT_MIN) || | 
|  | (type > SSH2_MSG_TRANSPORT_MAX) || | 
|  | (type == SSH2_MSG_SERVICE_REQUEST) || | 
|  | (type == SSH2_MSG_SERVICE_ACCEPT)) { | 
|  | debug("enqueue packet: %u", type); | 
|  | p = xcalloc(1, sizeof(*p)); | 
|  | p->type = type; | 
|  | memcpy(&p->payload, &active_state->outgoing_packet, | 
|  | sizeof(Buffer)); | 
|  | buffer_init(&active_state->outgoing_packet); | 
|  | TAILQ_INSERT_TAIL(&active_state->outgoing, p, next); | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* rekeying starts with sending KEXINIT */ | 
|  | if (type == SSH2_MSG_KEXINIT) | 
|  | active_state->rekeying = 1; | 
|  |  | 
|  | packet_send2_wrapped(); | 
|  |  | 
|  | /* after a NEWKEYS message we can send the complete queue */ | 
|  | if (type == SSH2_MSG_NEWKEYS) { | 
|  | active_state->rekeying = 0; | 
|  | active_state->rekey_time = monotime(); | 
|  | while ((p = TAILQ_FIRST(&active_state->outgoing))) { | 
|  | type = p->type; | 
|  | debug("dequeue packet: %u", type); | 
|  | buffer_free(&active_state->outgoing_packet); | 
|  | memcpy(&active_state->outgoing_packet, &p->payload, | 
|  | sizeof(Buffer)); | 
|  | TAILQ_REMOVE(&active_state->outgoing, p, next); | 
|  | free(p); | 
|  | packet_send2_wrapped(); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | void | 
|  | packet_send(void) | 
|  | { | 
|  | if (compat20) | 
|  | packet_send2(); | 
|  | else | 
|  | packet_send1(); | 
|  | DBG(debug("packet_send done")); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Waits until a packet has been received, and returns its type.  Note that | 
|  | * no other data is processed until this returns, so this function should not | 
|  | * be used during the interactive session. | 
|  | */ | 
|  |  | 
|  | int | 
|  | packet_read_seqnr(u_int32_t *seqnr_p) | 
|  | { | 
|  | int type, len, ret, cont, ms_remain = 0; | 
|  | fd_set *setp; | 
|  | char buf[8192]; | 
|  | struct timeval timeout, start, *timeoutp = NULL; | 
|  |  | 
|  | DBG(debug("packet_read()")); | 
|  |  | 
|  | setp = (fd_set *)xcalloc(howmany(active_state->connection_in + 1, | 
|  | NFDBITS), sizeof(fd_mask)); | 
|  |  | 
|  | /* Since we are blocking, ensure that all written packets have been sent. */ | 
|  | packet_write_wait(); | 
|  |  | 
|  | /* Stay in the loop until we have received a complete packet. */ | 
|  | for (;;) { | 
|  | /* Try to read a packet from the buffer. */ | 
|  | type = packet_read_poll_seqnr(seqnr_p); | 
|  | if (!compat20 && ( | 
|  | type == SSH_SMSG_SUCCESS | 
|  | || type == SSH_SMSG_FAILURE | 
|  | || type == SSH_CMSG_EOF | 
|  | || type == SSH_CMSG_EXIT_CONFIRMATION)) | 
|  | packet_check_eom(); | 
|  | /* If we got a packet, return it. */ | 
|  | if (type != SSH_MSG_NONE) { | 
|  | free(setp); | 
|  | return type; | 
|  | } | 
|  | /* | 
|  | * Otherwise, wait for some data to arrive, add it to the | 
|  | * buffer, and try again. | 
|  | */ | 
|  | memset(setp, 0, howmany(active_state->connection_in + 1, | 
|  | NFDBITS) * sizeof(fd_mask)); | 
|  | FD_SET(active_state->connection_in, setp); | 
|  |  | 
|  | if (active_state->packet_timeout_ms > 0) { | 
|  | ms_remain = active_state->packet_timeout_ms; | 
|  | timeoutp = &timeout; | 
|  | } | 
|  | /* Wait for some data to arrive. */ | 
|  | for (;;) { | 
|  | if (active_state->packet_timeout_ms != -1) { | 
|  | ms_to_timeval(&timeout, ms_remain); | 
|  | gettimeofday(&start, NULL); | 
|  | } | 
|  | if ((ret = select(active_state->connection_in + 1, setp, | 
|  | NULL, NULL, timeoutp)) >= 0) | 
|  | break; | 
|  | if (errno != EAGAIN && errno != EINTR && | 
|  | errno != EWOULDBLOCK) | 
|  | break; | 
|  | if (active_state->packet_timeout_ms == -1) | 
|  | continue; | 
|  | ms_subtract_diff(&start, &ms_remain); | 
|  | if (ms_remain <= 0) { | 
|  | ret = 0; | 
|  | break; | 
|  | } | 
|  | } | 
|  | if (ret == 0) { | 
|  | logit("Connection to %.200s timed out while " | 
|  | "waiting to read", get_remote_ipaddr()); | 
|  | cleanup_exit(255); | 
|  | } | 
|  | /* Read data from the socket. */ | 
|  | do { | 
|  | cont = 0; | 
|  | len = roaming_read(active_state->connection_in, buf, | 
|  | sizeof(buf), &cont); | 
|  | } while (len == 0 && cont); | 
|  | if (len == 0) { | 
|  | logit("Connection closed by %.200s", get_remote_ipaddr()); | 
|  | cleanup_exit(255); | 
|  | } | 
|  | if (len < 0) | 
|  | fatal("Read from socket failed: %.100s", strerror(errno)); | 
|  | /* Append it to the buffer. */ | 
|  | packet_process_incoming(buf, len); | 
|  | } | 
|  | /* NOTREACHED */ | 
|  | } | 
|  |  | 
|  | int | 
|  | packet_read(void) | 
|  | { | 
|  | return packet_read_seqnr(NULL); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Waits until a packet has been received, verifies that its type matches | 
|  | * that given, and gives a fatal error and exits if there is a mismatch. | 
|  | */ | 
|  |  | 
|  | void | 
|  | packet_read_expect(int expected_type) | 
|  | { | 
|  | int type; | 
|  |  | 
|  | type = packet_read(); | 
|  | if (type != expected_type) | 
|  | packet_disconnect("Protocol error: expected packet type %d, got %d", | 
|  | expected_type, type); | 
|  | } | 
|  |  | 
|  | /* Checks if a full packet is available in the data received so far via | 
|  | * packet_process_incoming.  If so, reads the packet; otherwise returns | 
|  | * SSH_MSG_NONE.  This does not wait for data from the connection. | 
|  | * | 
|  | * SSH_MSG_DISCONNECT is handled specially here.  Also, | 
|  | * SSH_MSG_IGNORE messages are skipped by this function and are never returned | 
|  | * to higher levels. | 
|  | */ | 
|  |  | 
|  | static int | 
|  | packet_read_poll1(void) | 
|  | { | 
|  | u_int len, padded_len; | 
|  | u_char *cp, type; | 
|  | u_int checksum, stored_checksum; | 
|  |  | 
|  | /* Check if input size is less than minimum packet size. */ | 
|  | if (buffer_len(&active_state->input) < 4 + 8) | 
|  | return SSH_MSG_NONE; | 
|  | /* Get length of incoming packet. */ | 
|  | cp = buffer_ptr(&active_state->input); | 
|  | len = get_u32(cp); | 
|  | if (len < 1 + 2 + 2 || len > 256 * 1024) | 
|  | packet_disconnect("Bad packet length %u.", len); | 
|  | padded_len = (len + 8) & ~7; | 
|  |  | 
|  | /* Check if the packet has been entirely received. */ | 
|  | if (buffer_len(&active_state->input) < 4 + padded_len) | 
|  | return SSH_MSG_NONE; | 
|  |  | 
|  | /* The entire packet is in buffer. */ | 
|  |  | 
|  | /* Consume packet length. */ | 
|  | buffer_consume(&active_state->input, 4); | 
|  |  | 
|  | /* | 
|  | * Cryptographic attack detector for ssh | 
|  | * (C)1998 CORE-SDI, Buenos Aires Argentina | 
|  | * Ariel Futoransky(futo@core-sdi.com) | 
|  | */ | 
|  | if (!active_state->receive_context.plaintext) { | 
|  | switch (detect_attack(buffer_ptr(&active_state->input), | 
|  | padded_len)) { | 
|  | case DEATTACK_DETECTED: | 
|  | packet_disconnect("crc32 compensation attack: " | 
|  | "network attack detected"); | 
|  | case DEATTACK_DOS_DETECTED: | 
|  | packet_disconnect("deattack denial of " | 
|  | "service detected"); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Decrypt data to incoming_packet. */ | 
|  | buffer_clear(&active_state->incoming_packet); | 
|  | cp = buffer_append_space(&active_state->incoming_packet, padded_len); | 
|  | if (cipher_crypt(&active_state->receive_context, 0, cp, | 
|  | buffer_ptr(&active_state->input), padded_len, 0, 0) != 0) | 
|  | fatal("%s: cipher_crypt failed", __func__); | 
|  |  | 
|  | buffer_consume(&active_state->input, padded_len); | 
|  |  | 
|  | #ifdef PACKET_DEBUG | 
|  | fprintf(stderr, "read_poll plain: "); | 
|  | buffer_dump(&active_state->incoming_packet); | 
|  | #endif | 
|  |  | 
|  | /* Compute packet checksum. */ | 
|  | checksum = ssh_crc32(buffer_ptr(&active_state->incoming_packet), | 
|  | buffer_len(&active_state->incoming_packet) - 4); | 
|  |  | 
|  | /* Skip padding. */ | 
|  | buffer_consume(&active_state->incoming_packet, 8 - len % 8); | 
|  |  | 
|  | /* Test check bytes. */ | 
|  | if (len != buffer_len(&active_state->incoming_packet)) | 
|  | packet_disconnect("packet_read_poll1: len %d != buffer_len %d.", | 
|  | len, buffer_len(&active_state->incoming_packet)); | 
|  |  | 
|  | cp = (u_char *)buffer_ptr(&active_state->incoming_packet) + len - 4; | 
|  | stored_checksum = get_u32(cp); | 
|  | if (checksum != stored_checksum) | 
|  | packet_disconnect("Corrupted check bytes on input."); | 
|  | buffer_consume_end(&active_state->incoming_packet, 4); | 
|  |  | 
|  | if (active_state->packet_compression) { | 
|  | buffer_clear(&active_state->compression_buffer); | 
|  | buffer_uncompress(&active_state->incoming_packet, | 
|  | &active_state->compression_buffer); | 
|  | buffer_clear(&active_state->incoming_packet); | 
|  | buffer_append(&active_state->incoming_packet, | 
|  | buffer_ptr(&active_state->compression_buffer), | 
|  | buffer_len(&active_state->compression_buffer)); | 
|  | } | 
|  | active_state->p_read.packets++; | 
|  | active_state->p_read.bytes += padded_len + 4; | 
|  | type = buffer_get_char(&active_state->incoming_packet); | 
|  | if (type < SSH_MSG_MIN || type > SSH_MSG_MAX) | 
|  | packet_disconnect("Invalid ssh1 packet type: %d", type); | 
|  | return type; | 
|  | } | 
|  |  | 
|  | static int | 
|  | packet_read_poll2(u_int32_t *seqnr_p) | 
|  | { | 
|  | u_int padlen, need; | 
|  | u_char *macbuf = NULL, *cp, type; | 
|  | u_int maclen, authlen = 0, aadlen = 0, block_size; | 
|  | Enc *enc   = NULL; | 
|  | Mac *mac   = NULL; | 
|  | Comp *comp = NULL; | 
|  |  | 
|  | if (active_state->packet_discard) | 
|  | return SSH_MSG_NONE; | 
|  |  | 
|  | if (active_state->newkeys[MODE_IN] != NULL) { | 
|  | enc  = &active_state->newkeys[MODE_IN]->enc; | 
|  | mac  = &active_state->newkeys[MODE_IN]->mac; | 
|  | comp = &active_state->newkeys[MODE_IN]->comp; | 
|  | /* disable mac for authenticated encryption */ | 
|  | if ((authlen = cipher_authlen(enc->cipher)) != 0) | 
|  | mac = NULL; | 
|  | } | 
|  | maclen = mac && mac->enabled ? mac->mac_len : 0; | 
|  | block_size = enc ? enc->block_size : 8; | 
|  | aadlen = (mac && mac->enabled && mac->etm) || authlen ? 4 : 0; | 
|  |  | 
|  | if (aadlen && active_state->packlen == 0) { | 
|  | if (cipher_get_length(&active_state->receive_context, | 
|  | &active_state->packlen, | 
|  | active_state->p_read.seqnr, | 
|  | buffer_ptr(&active_state->input), | 
|  | buffer_len(&active_state->input)) != 0) | 
|  | return SSH_MSG_NONE; | 
|  | if (active_state->packlen < 1 + 4 || | 
|  | active_state->packlen > PACKET_MAX_SIZE) { | 
|  | #ifdef PACKET_DEBUG | 
|  | buffer_dump(&active_state->input); | 
|  | #endif | 
|  | logit("Bad packet length %u.", active_state->packlen); | 
|  | packet_disconnect("Packet corrupt"); | 
|  | } | 
|  | buffer_clear(&active_state->incoming_packet); | 
|  | } else if (active_state->packlen == 0) { | 
|  | /* | 
|  | * check if input size is less than the cipher block size, | 
|  | * decrypt first block and extract length of incoming packet | 
|  | */ | 
|  | if (buffer_len(&active_state->input) < block_size) | 
|  | return SSH_MSG_NONE; | 
|  | buffer_clear(&active_state->incoming_packet); | 
|  | cp = buffer_append_space(&active_state->incoming_packet, | 
|  | block_size); | 
|  | if (cipher_crypt(&active_state->receive_context, | 
|  | active_state->p_read.seqnr, cp, | 
|  | buffer_ptr(&active_state->input), block_size, 0, 0) != 0) | 
|  | fatal("Decryption integrity check failed"); | 
|  | cp = buffer_ptr(&active_state->incoming_packet); | 
|  | active_state->packlen = get_u32(cp); | 
|  | if (active_state->packlen < 1 + 4 || | 
|  | active_state->packlen > PACKET_MAX_SIZE) { | 
|  | #ifdef PACKET_DEBUG | 
|  | buffer_dump(&active_state->incoming_packet); | 
|  | #endif | 
|  | logit("Bad packet length %u.", active_state->packlen); | 
|  | packet_start_discard(enc, mac, active_state->packlen, | 
|  | PACKET_MAX_SIZE); | 
|  | return SSH_MSG_NONE; | 
|  | } | 
|  | buffer_consume(&active_state->input, block_size); | 
|  | } | 
|  | DBG(debug("input: packet len %u", active_state->packlen+4)); | 
|  | if (aadlen) { | 
|  | /* only the payload is encrypted */ | 
|  | need = active_state->packlen; | 
|  | } else { | 
|  | /* | 
|  | * the payload size and the payload are encrypted, but we | 
|  | * have a partial packet of block_size bytes | 
|  | */ | 
|  | need = 4 + active_state->packlen - block_size; | 
|  | } | 
|  | DBG(debug("partial packet: block %d, need %d, maclen %d, authlen %d," | 
|  | " aadlen %d", block_size, need, maclen, authlen, aadlen)); | 
|  | if (need % block_size != 0) { | 
|  | logit("padding error: need %d block %d mod %d", | 
|  | need, block_size, need % block_size); | 
|  | packet_start_discard(enc, mac, active_state->packlen, | 
|  | PACKET_MAX_SIZE - block_size); | 
|  | return SSH_MSG_NONE; | 
|  | } | 
|  | /* | 
|  | * check if the entire packet has been received and | 
|  | * decrypt into incoming_packet: | 
|  | * 'aadlen' bytes are unencrypted, but authenticated. | 
|  | * 'need' bytes are encrypted, followed by either | 
|  | * 'authlen' bytes of authentication tag or | 
|  | * 'maclen' bytes of message authentication code. | 
|  | */ | 
|  | if (buffer_len(&active_state->input) < aadlen + need + authlen + maclen) | 
|  | return SSH_MSG_NONE; | 
|  | #ifdef PACKET_DEBUG | 
|  | fprintf(stderr, "read_poll enc/full: "); | 
|  | buffer_dump(&active_state->input); | 
|  | #endif | 
|  | /* EtM: compute mac over encrypted input */ | 
|  | if (mac && mac->enabled && mac->etm) | 
|  | macbuf = mac_compute(mac, active_state->p_read.seqnr, | 
|  | buffer_ptr(&active_state->input), aadlen + need); | 
|  | cp = buffer_append_space(&active_state->incoming_packet, aadlen + need); | 
|  | if (cipher_crypt(&active_state->receive_context, | 
|  | active_state->p_read.seqnr, cp, | 
|  | buffer_ptr(&active_state->input), need, aadlen, authlen) != 0) | 
|  | fatal("Decryption integrity check failed"); | 
|  | buffer_consume(&active_state->input, aadlen + need + authlen); | 
|  | /* | 
|  | * compute MAC over seqnr and packet, | 
|  | * increment sequence number for incoming packet | 
|  | */ | 
|  | if (mac && mac->enabled) { | 
|  | if (!mac->etm) | 
|  | macbuf = mac_compute(mac, active_state->p_read.seqnr, | 
|  | buffer_ptr(&active_state->incoming_packet), | 
|  | buffer_len(&active_state->incoming_packet)); | 
|  | if (timingsafe_bcmp(macbuf, buffer_ptr(&active_state->input), | 
|  | mac->mac_len) != 0) { | 
|  | logit("Corrupted MAC on input."); | 
|  | if (need > PACKET_MAX_SIZE) | 
|  | fatal("internal error need %d", need); | 
|  | packet_start_discard(enc, mac, active_state->packlen, | 
|  | PACKET_MAX_SIZE - need); | 
|  | return SSH_MSG_NONE; | 
|  | } | 
|  |  | 
|  | DBG(debug("MAC #%d ok", active_state->p_read.seqnr)); | 
|  | buffer_consume(&active_state->input, mac->mac_len); | 
|  | } | 
|  | /* XXX now it's safe to use fatal/packet_disconnect */ | 
|  | if (seqnr_p != NULL) | 
|  | *seqnr_p = active_state->p_read.seqnr; | 
|  | if (++active_state->p_read.seqnr == 0) | 
|  | logit("incoming seqnr wraps around"); | 
|  | if (++active_state->p_read.packets == 0) | 
|  | if (!(datafellows & SSH_BUG_NOREKEY)) | 
|  | fatal("XXX too many packets with same key"); | 
|  | active_state->p_read.blocks += (active_state->packlen + 4) / block_size; | 
|  | active_state->p_read.bytes += active_state->packlen + 4; | 
|  |  | 
|  | /* get padlen */ | 
|  | cp = buffer_ptr(&active_state->incoming_packet); | 
|  | padlen = cp[4]; | 
|  | DBG(debug("input: padlen %d", padlen)); | 
|  | if (padlen < 4) | 
|  | packet_disconnect("Corrupted padlen %d on input.", padlen); | 
|  |  | 
|  | /* skip packet size + padlen, discard padding */ | 
|  | buffer_consume(&active_state->incoming_packet, 4 + 1); | 
|  | buffer_consume_end(&active_state->incoming_packet, padlen); | 
|  |  | 
|  | DBG(debug("input: len before de-compress %d", | 
|  | buffer_len(&active_state->incoming_packet))); | 
|  | if (comp && comp->enabled) { | 
|  | buffer_clear(&active_state->compression_buffer); | 
|  | buffer_uncompress(&active_state->incoming_packet, | 
|  | &active_state->compression_buffer); | 
|  | buffer_clear(&active_state->incoming_packet); | 
|  | buffer_append(&active_state->incoming_packet, | 
|  | buffer_ptr(&active_state->compression_buffer), | 
|  | buffer_len(&active_state->compression_buffer)); | 
|  | DBG(debug("input: len after de-compress %d", | 
|  | buffer_len(&active_state->incoming_packet))); | 
|  | } | 
|  | /* | 
|  | * get packet type, implies consume. | 
|  | * return length of payload (without type field) | 
|  | */ | 
|  | type = buffer_get_char(&active_state->incoming_packet); | 
|  | if (type < SSH2_MSG_MIN || type >= SSH2_MSG_LOCAL_MIN) | 
|  | packet_disconnect("Invalid ssh2 packet type: %d", type); | 
|  | if (type == SSH2_MSG_NEWKEYS) | 
|  | set_newkeys(MODE_IN); | 
|  | else if (type == SSH2_MSG_USERAUTH_SUCCESS && | 
|  | !active_state->server_side) | 
|  | packet_enable_delayed_compress(); | 
|  | #ifdef PACKET_DEBUG | 
|  | fprintf(stderr, "read/plain[%d]:\r\n", type); | 
|  | buffer_dump(&active_state->incoming_packet); | 
|  | #endif | 
|  | /* reset for next packet */ | 
|  | active_state->packlen = 0; | 
|  | return type; | 
|  | } | 
|  |  | 
|  | int | 
|  | packet_read_poll_seqnr(u_int32_t *seqnr_p) | 
|  | { | 
|  | u_int reason, seqnr; | 
|  | u_char type; | 
|  | char *msg; | 
|  |  | 
|  | for (;;) { | 
|  | if (compat20) { | 
|  | type = packet_read_poll2(seqnr_p); | 
|  | if (type) { | 
|  | active_state->keep_alive_timeouts = 0; | 
|  | DBG(debug("received packet type %d", type)); | 
|  | } | 
|  | switch (type) { | 
|  | case SSH2_MSG_IGNORE: | 
|  | debug3("Received SSH2_MSG_IGNORE"); | 
|  | break; | 
|  | case SSH2_MSG_DEBUG: | 
|  | packet_get_char(); | 
|  | msg = packet_get_string(NULL); | 
|  | debug("Remote: %.900s", msg); | 
|  | free(msg); | 
|  | msg = packet_get_string(NULL); | 
|  | free(msg); | 
|  | break; | 
|  | case SSH2_MSG_DISCONNECT: | 
|  | reason = packet_get_int(); | 
|  | msg = packet_get_string(NULL); | 
|  | /* Ignore normal client exit notifications */ | 
|  | do_log2(active_state->server_side && | 
|  | reason == SSH2_DISCONNECT_BY_APPLICATION ? | 
|  | SYSLOG_LEVEL_INFO : SYSLOG_LEVEL_ERROR, | 
|  | "Received disconnect from %s: %u: %.400s", | 
|  | get_remote_ipaddr(), reason, msg); | 
|  | free(msg); | 
|  | cleanup_exit(255); | 
|  | break; | 
|  | case SSH2_MSG_UNIMPLEMENTED: | 
|  | seqnr = packet_get_int(); | 
|  | debug("Received SSH2_MSG_UNIMPLEMENTED for %u", | 
|  | seqnr); | 
|  | break; | 
|  | default: | 
|  | return type; | 
|  | } | 
|  | } else { | 
|  | type = packet_read_poll1(); | 
|  | switch (type) { | 
|  | case SSH_MSG_NONE: | 
|  | return SSH_MSG_NONE; | 
|  | case SSH_MSG_IGNORE: | 
|  | break; | 
|  | case SSH_MSG_DEBUG: | 
|  | msg = packet_get_string(NULL); | 
|  | debug("Remote: %.900s", msg); | 
|  | free(msg); | 
|  | break; | 
|  | case SSH_MSG_DISCONNECT: | 
|  | msg = packet_get_string(NULL); | 
|  | error("Received disconnect from %s: %.400s", | 
|  | get_remote_ipaddr(), msg); | 
|  | cleanup_exit(255); | 
|  | break; | 
|  | default: | 
|  | DBG(debug("received packet type %d", type)); | 
|  | return type; | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Buffers the given amount of input characters.  This is intended to be used | 
|  | * together with packet_read_poll. | 
|  | */ | 
|  |  | 
|  | void | 
|  | packet_process_incoming(const char *buf, u_int len) | 
|  | { | 
|  | if (active_state->packet_discard) { | 
|  | active_state->keep_alive_timeouts = 0; /* ?? */ | 
|  | if (len >= active_state->packet_discard) | 
|  | packet_stop_discard(); | 
|  | active_state->packet_discard -= len; | 
|  | return; | 
|  | } | 
|  | buffer_append(&active_state->input, buf, len); | 
|  | } | 
|  |  | 
|  | /* Returns a character from the packet. */ | 
|  |  | 
|  | u_int | 
|  | packet_get_char(void) | 
|  | { | 
|  | char ch; | 
|  |  | 
|  | buffer_get(&active_state->incoming_packet, &ch, 1); | 
|  | return (u_char) ch; | 
|  | } | 
|  |  | 
|  | /* Returns an integer from the packet data. */ | 
|  |  | 
|  | u_int | 
|  | packet_get_int(void) | 
|  | { | 
|  | return buffer_get_int(&active_state->incoming_packet); | 
|  | } | 
|  |  | 
|  | /* Returns an 64 bit integer from the packet data. */ | 
|  |  | 
|  | u_int64_t | 
|  | packet_get_int64(void) | 
|  | { | 
|  | return buffer_get_int64(&active_state->incoming_packet); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Returns an arbitrary precision integer from the packet data.  The integer | 
|  | * must have been initialized before this call. | 
|  | */ | 
|  |  | 
|  | void | 
|  | packet_get_bignum(BIGNUM * value) | 
|  | { | 
|  | buffer_get_bignum(&active_state->incoming_packet, value); | 
|  | } | 
|  |  | 
|  | void | 
|  | packet_get_bignum2(BIGNUM * value) | 
|  | { | 
|  | buffer_get_bignum2(&active_state->incoming_packet, value); | 
|  | } | 
|  |  | 
|  | #ifdef OPENSSL_HAS_ECC | 
|  | void | 
|  | packet_get_ecpoint(const EC_GROUP *curve, EC_POINT *point) | 
|  | { | 
|  | buffer_get_ecpoint(&active_state->incoming_packet, curve, point); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | void * | 
|  | packet_get_raw(u_int *length_ptr) | 
|  | { | 
|  | u_int bytes = buffer_len(&active_state->incoming_packet); | 
|  |  | 
|  | if (length_ptr != NULL) | 
|  | *length_ptr = bytes; | 
|  | return buffer_ptr(&active_state->incoming_packet); | 
|  | } | 
|  |  | 
|  | int | 
|  | packet_remaining(void) | 
|  | { | 
|  | return buffer_len(&active_state->incoming_packet); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Returns a string from the packet data.  The string is allocated using | 
|  | * xmalloc; it is the responsibility of the calling program to free it when | 
|  | * no longer needed.  The length_ptr argument may be NULL, or point to an | 
|  | * integer into which the length of the string is stored. | 
|  | */ | 
|  |  | 
|  | void * | 
|  | packet_get_string(u_int *length_ptr) | 
|  | { | 
|  | return buffer_get_string(&active_state->incoming_packet, length_ptr); | 
|  | } | 
|  |  | 
|  | void * | 
|  | packet_get_string_ptr(u_int *length_ptr) | 
|  | { | 
|  | return buffer_get_string_ptr(&active_state->incoming_packet, length_ptr); | 
|  | } | 
|  |  | 
|  | /* Ensures the returned string has no embedded \0 characters in it. */ | 
|  | char * | 
|  | packet_get_cstring(u_int *length_ptr) | 
|  | { | 
|  | return buffer_get_cstring(&active_state->incoming_packet, length_ptr); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Sends a diagnostic message from the server to the client.  This message | 
|  | * can be sent at any time (but not while constructing another message). The | 
|  | * message is printed immediately, but only if the client is being executed | 
|  | * in verbose mode.  These messages are primarily intended to ease debugging | 
|  | * authentication problems.   The length of the formatted message must not | 
|  | * exceed 1024 bytes.  This will automatically call packet_write_wait. | 
|  | */ | 
|  |  | 
|  | void | 
|  | packet_send_debug(const char *fmt,...) | 
|  | { | 
|  | char buf[1024]; | 
|  | va_list args; | 
|  |  | 
|  | if (compat20 && (datafellows & SSH_BUG_DEBUG)) | 
|  | return; | 
|  |  | 
|  | va_start(args, fmt); | 
|  | vsnprintf(buf, sizeof(buf), fmt, args); | 
|  | va_end(args); | 
|  |  | 
|  | if (compat20) { | 
|  | packet_start(SSH2_MSG_DEBUG); | 
|  | packet_put_char(0);	/* bool: always display */ | 
|  | packet_put_cstring(buf); | 
|  | packet_put_cstring(""); | 
|  | } else { | 
|  | packet_start(SSH_MSG_DEBUG); | 
|  | packet_put_cstring(buf); | 
|  | } | 
|  | packet_send(); | 
|  | packet_write_wait(); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Logs the error plus constructs and sends a disconnect packet, closes the | 
|  | * connection, and exits.  This function never returns. The error message | 
|  | * should not contain a newline.  The length of the formatted message must | 
|  | * not exceed 1024 bytes. | 
|  | */ | 
|  |  | 
|  | void | 
|  | packet_disconnect(const char *fmt,...) | 
|  | { | 
|  | char buf[1024]; | 
|  | va_list args; | 
|  | static int disconnecting = 0; | 
|  |  | 
|  | if (disconnecting)	/* Guard against recursive invocations. */ | 
|  | fatal("packet_disconnect called recursively."); | 
|  | disconnecting = 1; | 
|  |  | 
|  | /* | 
|  | * Format the message.  Note that the caller must make sure the | 
|  | * message is of limited size. | 
|  | */ | 
|  | va_start(args, fmt); | 
|  | vsnprintf(buf, sizeof(buf), fmt, args); | 
|  | va_end(args); | 
|  |  | 
|  | /* Display the error locally */ | 
|  | logit("Disconnecting: %.100s", buf); | 
|  |  | 
|  | /* Send the disconnect message to the other side, and wait for it to get sent. */ | 
|  | if (compat20) { | 
|  | packet_start(SSH2_MSG_DISCONNECT); | 
|  | packet_put_int(SSH2_DISCONNECT_PROTOCOL_ERROR); | 
|  | packet_put_cstring(buf); | 
|  | packet_put_cstring(""); | 
|  | } else { | 
|  | packet_start(SSH_MSG_DISCONNECT); | 
|  | packet_put_cstring(buf); | 
|  | } | 
|  | packet_send(); | 
|  | packet_write_wait(); | 
|  |  | 
|  | /* Stop listening for connections. */ | 
|  | channel_close_all(); | 
|  |  | 
|  | /* Close the connection. */ | 
|  | packet_close(); | 
|  | cleanup_exit(255); | 
|  | } | 
|  |  | 
|  | /* Checks if there is any buffered output, and tries to write some of the output. */ | 
|  |  | 
|  | void | 
|  | packet_write_poll(void) | 
|  | { | 
|  | int len = buffer_len(&active_state->output); | 
|  | int cont; | 
|  |  | 
|  | if (len > 0) { | 
|  | cont = 0; | 
|  | len = roaming_write(active_state->connection_out, | 
|  | buffer_ptr(&active_state->output), len, &cont); | 
|  | if (len == -1) { | 
|  | if (errno == EINTR || errno == EAGAIN || | 
|  | errno == EWOULDBLOCK) | 
|  | return; | 
|  | fatal("Write failed: %.100s", strerror(errno)); | 
|  | } | 
|  | if (len == 0 && !cont) | 
|  | fatal("Write connection closed"); | 
|  | buffer_consume(&active_state->output, len); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Calls packet_write_poll repeatedly until all pending output data has been | 
|  | * written. | 
|  | */ | 
|  |  | 
|  | void | 
|  | packet_write_wait(void) | 
|  | { | 
|  | fd_set *setp; | 
|  | int ret, ms_remain = 0; | 
|  | struct timeval start, timeout, *timeoutp = NULL; | 
|  |  | 
|  | setp = (fd_set *)xcalloc(howmany(active_state->connection_out + 1, | 
|  | NFDBITS), sizeof(fd_mask)); | 
|  | packet_write_poll(); | 
|  | while (packet_have_data_to_write()) { | 
|  | memset(setp, 0, howmany(active_state->connection_out + 1, | 
|  | NFDBITS) * sizeof(fd_mask)); | 
|  | FD_SET(active_state->connection_out, setp); | 
|  |  | 
|  | if (active_state->packet_timeout_ms > 0) { | 
|  | ms_remain = active_state->packet_timeout_ms; | 
|  | timeoutp = &timeout; | 
|  | } | 
|  | for (;;) { | 
|  | if (active_state->packet_timeout_ms != -1) { | 
|  | ms_to_timeval(&timeout, ms_remain); | 
|  | gettimeofday(&start, NULL); | 
|  | } | 
|  | if ((ret = select(active_state->connection_out + 1, | 
|  | NULL, setp, NULL, timeoutp)) >= 0) | 
|  | break; | 
|  | if (errno != EAGAIN && errno != EINTR && | 
|  | errno != EWOULDBLOCK) | 
|  | break; | 
|  | if (active_state->packet_timeout_ms == -1) | 
|  | continue; | 
|  | ms_subtract_diff(&start, &ms_remain); | 
|  | if (ms_remain <= 0) { | 
|  | ret = 0; | 
|  | break; | 
|  | } | 
|  | } | 
|  | if (ret == 0) { | 
|  | logit("Connection to %.200s timed out while " | 
|  | "waiting to write", get_remote_ipaddr()); | 
|  | cleanup_exit(255); | 
|  | } | 
|  | packet_write_poll(); | 
|  | } | 
|  | free(setp); | 
|  | } | 
|  |  | 
|  | /* Returns true if there is buffered data to write to the connection. */ | 
|  |  | 
|  | int | 
|  | packet_have_data_to_write(void) | 
|  | { | 
|  | return buffer_len(&active_state->output) != 0; | 
|  | } | 
|  |  | 
|  | /* Returns true if there is not too much data to write to the connection. */ | 
|  |  | 
|  | int | 
|  | packet_not_very_much_data_to_write(void) | 
|  | { | 
|  | if (active_state->interactive_mode) | 
|  | return buffer_len(&active_state->output) < 16384; | 
|  | else | 
|  | return buffer_len(&active_state->output) < 128 * 1024; | 
|  | } | 
|  |  | 
|  | static void | 
|  | packet_set_tos(int tos) | 
|  | { | 
|  | #ifndef IP_TOS_IS_BROKEN | 
|  | if (!packet_connection_is_on_socket()) | 
|  | return; | 
|  | switch (packet_connection_af()) { | 
|  | # ifdef IP_TOS | 
|  | case AF_INET: | 
|  | debug3("%s: set IP_TOS 0x%02x", __func__, tos); | 
|  | if (setsockopt(active_state->connection_in, | 
|  | IPPROTO_IP, IP_TOS, &tos, sizeof(tos)) < 0) | 
|  | error("setsockopt IP_TOS %d: %.100s:", | 
|  | tos, strerror(errno)); | 
|  | break; | 
|  | # endif /* IP_TOS */ | 
|  | # ifdef IPV6_TCLASS | 
|  | case AF_INET6: | 
|  | debug3("%s: set IPV6_TCLASS 0x%02x", __func__, tos); | 
|  | if (setsockopt(active_state->connection_in, | 
|  | IPPROTO_IPV6, IPV6_TCLASS, &tos, sizeof(tos)) < 0) | 
|  | error("setsockopt IPV6_TCLASS %d: %.100s:", | 
|  | tos, strerror(errno)); | 
|  | break; | 
|  | # endif /* IPV6_TCLASS */ | 
|  | } | 
|  | #endif /* IP_TOS_IS_BROKEN */ | 
|  | } | 
|  |  | 
|  | /* Informs that the current session is interactive.  Sets IP flags for that. */ | 
|  |  | 
|  | void | 
|  | packet_set_interactive(int interactive, int qos_interactive, int qos_bulk) | 
|  | { | 
|  | if (active_state->set_interactive_called) | 
|  | return; | 
|  | active_state->set_interactive_called = 1; | 
|  |  | 
|  | /* Record that we are in interactive mode. */ | 
|  | active_state->interactive_mode = interactive; | 
|  |  | 
|  | /* Only set socket options if using a socket.  */ | 
|  | if (!packet_connection_is_on_socket()) | 
|  | return; | 
|  | set_nodelay(active_state->connection_in); | 
|  | packet_set_tos(interactive ? qos_interactive : qos_bulk); | 
|  | } | 
|  |  | 
|  | /* Returns true if the current connection is interactive. */ | 
|  |  | 
|  | int | 
|  | packet_is_interactive(void) | 
|  | { | 
|  | return active_state->interactive_mode; | 
|  | } | 
|  |  | 
|  | int | 
|  | packet_set_maxsize(u_int s) | 
|  | { | 
|  | if (active_state->set_maxsize_called) { | 
|  | logit("packet_set_maxsize: called twice: old %d new %d", | 
|  | active_state->max_packet_size, s); | 
|  | return -1; | 
|  | } | 
|  | if (s < 4 * 1024 || s > 1024 * 1024) { | 
|  | logit("packet_set_maxsize: bad size %d", s); | 
|  | return -1; | 
|  | } | 
|  | active_state->set_maxsize_called = 1; | 
|  | debug("packet_set_maxsize: setting to %d", s); | 
|  | active_state->max_packet_size = s; | 
|  | return s; | 
|  | } | 
|  |  | 
|  | int | 
|  | packet_inc_alive_timeouts(void) | 
|  | { | 
|  | return ++active_state->keep_alive_timeouts; | 
|  | } | 
|  |  | 
|  | void | 
|  | packet_set_alive_timeouts(int ka) | 
|  | { | 
|  | active_state->keep_alive_timeouts = ka; | 
|  | } | 
|  |  | 
|  | u_int | 
|  | packet_get_maxsize(void) | 
|  | { | 
|  | return active_state->max_packet_size; | 
|  | } | 
|  |  | 
|  | /* roundup current message to pad bytes */ | 
|  | void | 
|  | packet_add_padding(u_char pad) | 
|  | { | 
|  | active_state->extra_pad = pad; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * 9.2.  Ignored Data Message | 
|  | * | 
|  | *   byte      SSH_MSG_IGNORE | 
|  | *   string    data | 
|  | * | 
|  | * All implementations MUST understand (and ignore) this message at any | 
|  | * time (after receiving the protocol version). No implementation is | 
|  | * required to send them. This message can be used as an additional | 
|  | * protection measure against advanced traffic analysis techniques. | 
|  | */ | 
|  | void | 
|  | packet_send_ignore(int nbytes) | 
|  | { | 
|  | u_int32_t rnd = 0; | 
|  | int i; | 
|  |  | 
|  | packet_start(compat20 ? SSH2_MSG_IGNORE : SSH_MSG_IGNORE); | 
|  | packet_put_int(nbytes); | 
|  | for (i = 0; i < nbytes; i++) { | 
|  | if (i % 4 == 0) | 
|  | rnd = arc4random(); | 
|  | packet_put_char((u_char)rnd & 0xff); | 
|  | rnd >>= 8; | 
|  | } | 
|  | } | 
|  |  | 
|  | #define MAX_PACKETS	(1U<<31) | 
|  | int | 
|  | packet_need_rekeying(void) | 
|  | { | 
|  | if (datafellows & SSH_BUG_NOREKEY) | 
|  | return 0; | 
|  | return | 
|  | (active_state->p_send.packets > MAX_PACKETS) || | 
|  | (active_state->p_read.packets > MAX_PACKETS) || | 
|  | (active_state->max_blocks_out && | 
|  | (active_state->p_send.blocks > active_state->max_blocks_out)) || | 
|  | (active_state->max_blocks_in && | 
|  | (active_state->p_read.blocks > active_state->max_blocks_in)) || | 
|  | (active_state->rekey_interval != 0 && active_state->rekey_time + | 
|  | active_state->rekey_interval <= monotime()); | 
|  | } | 
|  |  | 
|  | void | 
|  | packet_set_rekey_limits(u_int32_t bytes, time_t seconds) | 
|  | { | 
|  | debug3("rekey after %lld bytes, %d seconds", (long long)bytes, | 
|  | (int)seconds); | 
|  | active_state->rekey_limit = bytes; | 
|  | active_state->rekey_interval = seconds; | 
|  | /* | 
|  | * We set the time here so that in post-auth privsep slave we count | 
|  | * from the completion of the authentication. | 
|  | */ | 
|  | active_state->rekey_time = monotime(); | 
|  | } | 
|  |  | 
|  | time_t | 
|  | packet_get_rekey_timeout(void) | 
|  | { | 
|  | time_t seconds; | 
|  |  | 
|  | seconds = active_state->rekey_time + active_state->rekey_interval - | 
|  | monotime(); | 
|  | return (seconds <= 0 ? 1 : seconds); | 
|  | } | 
|  |  | 
|  | void | 
|  | packet_set_server(void) | 
|  | { | 
|  | active_state->server_side = 1; | 
|  | } | 
|  |  | 
|  | void | 
|  | packet_set_authenticated(void) | 
|  | { | 
|  | active_state->after_authentication = 1; | 
|  | } | 
|  |  | 
|  | void * | 
|  | packet_get_input(void) | 
|  | { | 
|  | return (void *)&active_state->input; | 
|  | } | 
|  |  | 
|  | void * | 
|  | packet_get_output(void) | 
|  | { | 
|  | return (void *)&active_state->output; | 
|  | } | 
|  |  | 
|  | void * | 
|  | packet_get_newkeys(int mode) | 
|  | { | 
|  | return (void *)active_state->newkeys[mode]; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Save the state for the real connection, and use a separate state when | 
|  | * resuming a suspended connection. | 
|  | */ | 
|  | void | 
|  | packet_backup_state(void) | 
|  | { | 
|  | struct session_state *tmp; | 
|  |  | 
|  | close(active_state->connection_in); | 
|  | active_state->connection_in = -1; | 
|  | close(active_state->connection_out); | 
|  | active_state->connection_out = -1; | 
|  | if (backup_state) | 
|  | tmp = backup_state; | 
|  | else | 
|  | tmp = alloc_session_state(); | 
|  | backup_state = active_state; | 
|  | active_state = tmp; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Swap in the old state when resuming a connecion. | 
|  | */ | 
|  | void | 
|  | packet_restore_state(void) | 
|  | { | 
|  | struct session_state *tmp; | 
|  | void *buf; | 
|  | u_int len; | 
|  |  | 
|  | tmp = backup_state; | 
|  | backup_state = active_state; | 
|  | active_state = tmp; | 
|  | active_state->connection_in = backup_state->connection_in; | 
|  | backup_state->connection_in = -1; | 
|  | active_state->connection_out = backup_state->connection_out; | 
|  | backup_state->connection_out = -1; | 
|  | len = buffer_len(&backup_state->input); | 
|  | if (len > 0) { | 
|  | buf = buffer_ptr(&backup_state->input); | 
|  | buffer_append(&active_state->input, buf, len); | 
|  | buffer_clear(&backup_state->input); | 
|  | add_recv_bytes(len); | 
|  | } | 
|  | } |