|  | /* $OpenBSD: channels.c,v 1.332 2014/04/28 03:09:18 djm Exp $ */ | 
|  | /* | 
|  | * Author: Tatu Ylonen <ylo@cs.hut.fi> | 
|  | * Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland | 
|  | *                    All rights reserved | 
|  | * This file contains functions for generic socket connection forwarding. | 
|  | * There is also code for initiating connection forwarding for X11 connections, | 
|  | * arbitrary tcp/ip connections, and the authentication agent connection. | 
|  | * | 
|  | * As far as I am concerned, the code I have written for this software | 
|  | * can be used freely for any purpose.  Any derived versions of this | 
|  | * software must be clearly marked as such, and if the derived work is | 
|  | * incompatible with the protocol description in the RFC file, it must be | 
|  | * called by a name other than "ssh" or "Secure Shell". | 
|  | * | 
|  | * SSH2 support added by Markus Friedl. | 
|  | * Copyright (c) 1999, 2000, 2001, 2002 Markus Friedl.  All rights reserved. | 
|  | * Copyright (c) 1999 Dug Song.  All rights reserved. | 
|  | * Copyright (c) 1999 Theo de Raadt.  All rights reserved. | 
|  | * | 
|  | * Redistribution and use in source and binary forms, with or without | 
|  | * modification, are permitted provided that the following conditions | 
|  | * are met: | 
|  | * 1. Redistributions of source code must retain the above copyright | 
|  | *    notice, this list of conditions and the following disclaimer. | 
|  | * 2. Redistributions in binary form must reproduce the above copyright | 
|  | *    notice, this list of conditions and the following disclaimer in the | 
|  | *    documentation and/or other materials provided with the distribution. | 
|  | * | 
|  | * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR | 
|  | * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES | 
|  | * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. | 
|  | * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, | 
|  | * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT | 
|  | * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, | 
|  | * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY | 
|  | * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | 
|  | * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF | 
|  | * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | 
|  | */ | 
|  |  | 
|  | #include "includes.h" | 
|  |  | 
|  | #include <sys/types.h> | 
|  | #include <sys/ioctl.h> | 
|  | #include <sys/un.h> | 
|  | #include <sys/socket.h> | 
|  | #ifdef HAVE_SYS_TIME_H | 
|  | # include <sys/time.h> | 
|  | #endif | 
|  |  | 
|  | #include <netinet/in.h> | 
|  | #include <arpa/inet.h> | 
|  |  | 
|  | #include <errno.h> | 
|  | #include <fcntl.h> | 
|  | #include <netdb.h> | 
|  | #include <stdio.h> | 
|  | #include <stdlib.h> | 
|  | #include <string.h> | 
|  | #include <termios.h> | 
|  | #include <unistd.h> | 
|  | #include <stdarg.h> | 
|  |  | 
|  | #include "openbsd-compat/sys-queue.h" | 
|  | #include "xmalloc.h" | 
|  | #include "ssh.h" | 
|  | #include "ssh1.h" | 
|  | #include "ssh2.h" | 
|  | #include "packet.h" | 
|  | #include "log.h" | 
|  | #include "misc.h" | 
|  | #include "buffer.h" | 
|  | #include "channels.h" | 
|  | #include "compat.h" | 
|  | #include "canohost.h" | 
|  | #include "key.h" | 
|  | #include "authfd.h" | 
|  | #include "pathnames.h" | 
|  |  | 
|  | /* -- channel core */ | 
|  |  | 
|  | /* | 
|  | * Pointer to an array containing all allocated channels.  The array is | 
|  | * dynamically extended as needed. | 
|  | */ | 
|  | static Channel **channels = NULL; | 
|  |  | 
|  | /* | 
|  | * Size of the channel array.  All slots of the array must always be | 
|  | * initialized (at least the type field); unused slots set to NULL | 
|  | */ | 
|  | static u_int channels_alloc = 0; | 
|  |  | 
|  | /* | 
|  | * Maximum file descriptor value used in any of the channels.  This is | 
|  | * updated in channel_new. | 
|  | */ | 
|  | static int channel_max_fd = 0; | 
|  |  | 
|  |  | 
|  | /* -- tcp forwarding */ | 
|  |  | 
|  | /* | 
|  | * Data structure for storing which hosts are permitted for forward requests. | 
|  | * The local sides of any remote forwards are stored in this array to prevent | 
|  | * a corrupt remote server from accessing arbitrary TCP/IP ports on our local | 
|  | * network (which might be behind a firewall). | 
|  | */ | 
|  | typedef struct { | 
|  | char *host_to_connect;		/* Connect to 'host'. */ | 
|  | u_short port_to_connect;	/* Connect to 'port'. */ | 
|  | u_short listen_port;		/* Remote side should listen port number. */ | 
|  | } ForwardPermission; | 
|  |  | 
|  | /* List of all permitted host/port pairs to connect by the user. */ | 
|  | static ForwardPermission *permitted_opens = NULL; | 
|  |  | 
|  | /* List of all permitted host/port pairs to connect by the admin. */ | 
|  | static ForwardPermission *permitted_adm_opens = NULL; | 
|  |  | 
|  | /* Number of permitted host/port pairs in the array permitted by the user. */ | 
|  | static int num_permitted_opens = 0; | 
|  |  | 
|  | /* Number of permitted host/port pair in the array permitted by the admin. */ | 
|  | static int num_adm_permitted_opens = 0; | 
|  |  | 
|  | /* special-case port number meaning allow any port */ | 
|  | #define FWD_PERMIT_ANY_PORT	0 | 
|  |  | 
|  | /* | 
|  | * If this is true, all opens are permitted.  This is the case on the server | 
|  | * on which we have to trust the client anyway, and the user could do | 
|  | * anything after logging in anyway. | 
|  | */ | 
|  | static int all_opens_permitted = 0; | 
|  |  | 
|  |  | 
|  | /* -- X11 forwarding */ | 
|  |  | 
|  | /* Maximum number of fake X11 displays to try. */ | 
|  | #define MAX_DISPLAYS  1000 | 
|  |  | 
|  | /* Saved X11 local (client) display. */ | 
|  | static char *x11_saved_display = NULL; | 
|  |  | 
|  | /* Saved X11 authentication protocol name. */ | 
|  | static char *x11_saved_proto = NULL; | 
|  |  | 
|  | /* Saved X11 authentication data.  This is the real data. */ | 
|  | static char *x11_saved_data = NULL; | 
|  | static u_int x11_saved_data_len = 0; | 
|  |  | 
|  | /* | 
|  | * Fake X11 authentication data.  This is what the server will be sending us; | 
|  | * we should replace any occurrences of this by the real data. | 
|  | */ | 
|  | static u_char *x11_fake_data = NULL; | 
|  | static u_int x11_fake_data_len; | 
|  |  | 
|  |  | 
|  | /* -- agent forwarding */ | 
|  |  | 
|  | #define	NUM_SOCKS	10 | 
|  |  | 
|  | /* AF_UNSPEC or AF_INET or AF_INET6 */ | 
|  | static int IPv4or6 = AF_UNSPEC; | 
|  |  | 
|  | /* helper */ | 
|  | static void port_open_helper(Channel *c, char *rtype); | 
|  |  | 
|  | /* non-blocking connect helpers */ | 
|  | static int connect_next(struct channel_connect *); | 
|  | static void channel_connect_ctx_free(struct channel_connect *); | 
|  |  | 
|  | /* -- channel core */ | 
|  |  | 
|  | Channel * | 
|  | channel_by_id(int id) | 
|  | { | 
|  | Channel *c; | 
|  |  | 
|  | if (id < 0 || (u_int)id >= channels_alloc) { | 
|  | logit("channel_by_id: %d: bad id", id); | 
|  | return NULL; | 
|  | } | 
|  | c = channels[id]; | 
|  | if (c == NULL) { | 
|  | logit("channel_by_id: %d: bad id: channel free", id); | 
|  | return NULL; | 
|  | } | 
|  | return c; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Returns the channel if it is allowed to receive protocol messages. | 
|  | * Private channels, like listening sockets, may not receive messages. | 
|  | */ | 
|  | Channel * | 
|  | channel_lookup(int id) | 
|  | { | 
|  | Channel *c; | 
|  |  | 
|  | if ((c = channel_by_id(id)) == NULL) | 
|  | return (NULL); | 
|  |  | 
|  | switch (c->type) { | 
|  | case SSH_CHANNEL_X11_OPEN: | 
|  | case SSH_CHANNEL_LARVAL: | 
|  | case SSH_CHANNEL_CONNECTING: | 
|  | case SSH_CHANNEL_DYNAMIC: | 
|  | case SSH_CHANNEL_OPENING: | 
|  | case SSH_CHANNEL_OPEN: | 
|  | case SSH_CHANNEL_INPUT_DRAINING: | 
|  | case SSH_CHANNEL_OUTPUT_DRAINING: | 
|  | case SSH_CHANNEL_ABANDONED: | 
|  | return (c); | 
|  | } | 
|  | logit("Non-public channel %d, type %d.", id, c->type); | 
|  | return (NULL); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Register filedescriptors for a channel, used when allocating a channel or | 
|  | * when the channel consumer/producer is ready, e.g. shell exec'd | 
|  | */ | 
|  | static void | 
|  | channel_register_fds(Channel *c, int rfd, int wfd, int efd, | 
|  | int extusage, int nonblock, int is_tty) | 
|  | { | 
|  | /* Update the maximum file descriptor value. */ | 
|  | channel_max_fd = MAX(channel_max_fd, rfd); | 
|  | channel_max_fd = MAX(channel_max_fd, wfd); | 
|  | channel_max_fd = MAX(channel_max_fd, efd); | 
|  |  | 
|  | if (rfd != -1) | 
|  | fcntl(rfd, F_SETFD, FD_CLOEXEC); | 
|  | if (wfd != -1 && wfd != rfd) | 
|  | fcntl(wfd, F_SETFD, FD_CLOEXEC); | 
|  | if (efd != -1 && efd != rfd && efd != wfd) | 
|  | fcntl(efd, F_SETFD, FD_CLOEXEC); | 
|  |  | 
|  | c->rfd = rfd; | 
|  | c->wfd = wfd; | 
|  | c->sock = (rfd == wfd) ? rfd : -1; | 
|  | c->efd = efd; | 
|  | c->extended_usage = extusage; | 
|  |  | 
|  | if ((c->isatty = is_tty) != 0) | 
|  | debug2("channel %d: rfd %d isatty", c->self, c->rfd); | 
|  | #ifdef _AIX | 
|  | /* XXX: Later AIX versions can't push as much data to tty */ | 
|  | c->wfd_isatty = is_tty || isatty(c->wfd); | 
|  | #endif | 
|  |  | 
|  | /* enable nonblocking mode */ | 
|  | if (nonblock) { | 
|  | if (rfd != -1) | 
|  | set_nonblock(rfd); | 
|  | if (wfd != -1) | 
|  | set_nonblock(wfd); | 
|  | if (efd != -1) | 
|  | set_nonblock(efd); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Allocate a new channel object and set its type and socket. This will cause | 
|  | * remote_name to be freed. | 
|  | */ | 
|  | Channel * | 
|  | channel_new(char *ctype, int type, int rfd, int wfd, int efd, | 
|  | u_int window, u_int maxpack, int extusage, char *remote_name, int nonblock) | 
|  | { | 
|  | int found; | 
|  | u_int i; | 
|  | Channel *c; | 
|  |  | 
|  | /* Do initial allocation if this is the first call. */ | 
|  | if (channels_alloc == 0) { | 
|  | channels_alloc = 10; | 
|  | channels = xcalloc(channels_alloc, sizeof(Channel *)); | 
|  | for (i = 0; i < channels_alloc; i++) | 
|  | channels[i] = NULL; | 
|  | } | 
|  | /* Try to find a free slot where to put the new channel. */ | 
|  | for (found = -1, i = 0; i < channels_alloc; i++) | 
|  | if (channels[i] == NULL) { | 
|  | /* Found a free slot. */ | 
|  | found = (int)i; | 
|  | break; | 
|  | } | 
|  | if (found < 0) { | 
|  | /* There are no free slots.  Take last+1 slot and expand the array.  */ | 
|  | found = channels_alloc; | 
|  | if (channels_alloc > 10000) | 
|  | fatal("channel_new: internal error: channels_alloc %d " | 
|  | "too big.", channels_alloc); | 
|  | channels = xrealloc(channels, channels_alloc + 10, | 
|  | sizeof(Channel *)); | 
|  | channels_alloc += 10; | 
|  | debug2("channel: expanding %d", channels_alloc); | 
|  | for (i = found; i < channels_alloc; i++) | 
|  | channels[i] = NULL; | 
|  | } | 
|  | /* Initialize and return new channel. */ | 
|  | c = channels[found] = xcalloc(1, sizeof(Channel)); | 
|  | buffer_init(&c->input); | 
|  | buffer_init(&c->output); | 
|  | buffer_init(&c->extended); | 
|  | c->path = NULL; | 
|  | c->listening_addr = NULL; | 
|  | c->listening_port = 0; | 
|  | c->ostate = CHAN_OUTPUT_OPEN; | 
|  | c->istate = CHAN_INPUT_OPEN; | 
|  | c->flags = 0; | 
|  | channel_register_fds(c, rfd, wfd, efd, extusage, nonblock, 0); | 
|  | c->notbefore = 0; | 
|  | c->self = found; | 
|  | c->type = type; | 
|  | c->ctype = ctype; | 
|  | c->local_window = window; | 
|  | c->local_window_max = window; | 
|  | c->local_consumed = 0; | 
|  | c->local_maxpacket = maxpack; | 
|  | c->remote_id = -1; | 
|  | c->remote_name = xstrdup(remote_name); | 
|  | c->remote_window = 0; | 
|  | c->remote_maxpacket = 0; | 
|  | c->force_drain = 0; | 
|  | c->single_connection = 0; | 
|  | c->detach_user = NULL; | 
|  | c->detach_close = 0; | 
|  | c->open_confirm = NULL; | 
|  | c->open_confirm_ctx = NULL; | 
|  | c->input_filter = NULL; | 
|  | c->output_filter = NULL; | 
|  | c->filter_ctx = NULL; | 
|  | c->filter_cleanup = NULL; | 
|  | c->ctl_chan = -1; | 
|  | c->mux_rcb = NULL; | 
|  | c->mux_ctx = NULL; | 
|  | c->mux_pause = 0; | 
|  | c->delayed = 1;		/* prevent call to channel_post handler */ | 
|  | TAILQ_INIT(&c->status_confirms); | 
|  | debug("channel %d: new [%s]", found, remote_name); | 
|  | return c; | 
|  | } | 
|  |  | 
|  | static int | 
|  | channel_find_maxfd(void) | 
|  | { | 
|  | u_int i; | 
|  | int max = 0; | 
|  | Channel *c; | 
|  |  | 
|  | for (i = 0; i < channels_alloc; i++) { | 
|  | c = channels[i]; | 
|  | if (c != NULL) { | 
|  | max = MAX(max, c->rfd); | 
|  | max = MAX(max, c->wfd); | 
|  | max = MAX(max, c->efd); | 
|  | } | 
|  | } | 
|  | return max; | 
|  | } | 
|  |  | 
|  | int | 
|  | channel_close_fd(int *fdp) | 
|  | { | 
|  | int ret = 0, fd = *fdp; | 
|  |  | 
|  | if (fd != -1) { | 
|  | ret = close(fd); | 
|  | *fdp = -1; | 
|  | if (fd == channel_max_fd) | 
|  | channel_max_fd = channel_find_maxfd(); | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Close all channel fd/socket. */ | 
|  | static void | 
|  | channel_close_fds(Channel *c) | 
|  | { | 
|  | channel_close_fd(&c->sock); | 
|  | channel_close_fd(&c->rfd); | 
|  | channel_close_fd(&c->wfd); | 
|  | channel_close_fd(&c->efd); | 
|  | } | 
|  |  | 
|  | /* Free the channel and close its fd/socket. */ | 
|  | void | 
|  | channel_free(Channel *c) | 
|  | { | 
|  | char *s; | 
|  | u_int i, n; | 
|  | struct channel_confirm *cc; | 
|  |  | 
|  | for (n = 0, i = 0; i < channels_alloc; i++) | 
|  | if (channels[i]) | 
|  | n++; | 
|  | debug("channel %d: free: %s, nchannels %u", c->self, | 
|  | c->remote_name ? c->remote_name : "???", n); | 
|  |  | 
|  | s = channel_open_message(); | 
|  | debug3("channel %d: status: %s", c->self, s); | 
|  | free(s); | 
|  |  | 
|  | if (c->sock != -1) | 
|  | shutdown(c->sock, SHUT_RDWR); | 
|  | channel_close_fds(c); | 
|  | buffer_free(&c->input); | 
|  | buffer_free(&c->output); | 
|  | buffer_free(&c->extended); | 
|  | free(c->remote_name); | 
|  | c->remote_name = NULL; | 
|  | free(c->path); | 
|  | c->path = NULL; | 
|  | free(c->listening_addr); | 
|  | c->listening_addr = NULL; | 
|  | while ((cc = TAILQ_FIRST(&c->status_confirms)) != NULL) { | 
|  | if (cc->abandon_cb != NULL) | 
|  | cc->abandon_cb(c, cc->ctx); | 
|  | TAILQ_REMOVE(&c->status_confirms, cc, entry); | 
|  | explicit_bzero(cc, sizeof(*cc)); | 
|  | free(cc); | 
|  | } | 
|  | if (c->filter_cleanup != NULL && c->filter_ctx != NULL) | 
|  | c->filter_cleanup(c->self, c->filter_ctx); | 
|  | channels[c->self] = NULL; | 
|  | free(c); | 
|  | } | 
|  |  | 
|  | void | 
|  | channel_free_all(void) | 
|  | { | 
|  | u_int i; | 
|  |  | 
|  | for (i = 0; i < channels_alloc; i++) | 
|  | if (channels[i] != NULL) | 
|  | channel_free(channels[i]); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Closes the sockets/fds of all channels.  This is used to close extra file | 
|  | * descriptors after a fork. | 
|  | */ | 
|  | void | 
|  | channel_close_all(void) | 
|  | { | 
|  | u_int i; | 
|  |  | 
|  | for (i = 0; i < channels_alloc; i++) | 
|  | if (channels[i] != NULL) | 
|  | channel_close_fds(channels[i]); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Stop listening to channels. | 
|  | */ | 
|  | void | 
|  | channel_stop_listening(void) | 
|  | { | 
|  | u_int i; | 
|  | Channel *c; | 
|  |  | 
|  | for (i = 0; i < channels_alloc; i++) { | 
|  | c = channels[i]; | 
|  | if (c != NULL) { | 
|  | switch (c->type) { | 
|  | case SSH_CHANNEL_AUTH_SOCKET: | 
|  | case SSH_CHANNEL_PORT_LISTENER: | 
|  | case SSH_CHANNEL_RPORT_LISTENER: | 
|  | case SSH_CHANNEL_X11_LISTENER: | 
|  | channel_close_fd(&c->sock); | 
|  | channel_free(c); | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Returns true if no channel has too much buffered data, and false if one or | 
|  | * more channel is overfull. | 
|  | */ | 
|  | int | 
|  | channel_not_very_much_buffered_data(void) | 
|  | { | 
|  | u_int i; | 
|  | Channel *c; | 
|  |  | 
|  | for (i = 0; i < channels_alloc; i++) { | 
|  | c = channels[i]; | 
|  | if (c != NULL && c->type == SSH_CHANNEL_OPEN) { | 
|  | #if 0 | 
|  | if (!compat20 && | 
|  | buffer_len(&c->input) > packet_get_maxsize()) { | 
|  | debug2("channel %d: big input buffer %d", | 
|  | c->self, buffer_len(&c->input)); | 
|  | return 0; | 
|  | } | 
|  | #endif | 
|  | if (buffer_len(&c->output) > packet_get_maxsize()) { | 
|  | debug2("channel %d: big output buffer %u > %u", | 
|  | c->self, buffer_len(&c->output), | 
|  | packet_get_maxsize()); | 
|  | return 0; | 
|  | } | 
|  | } | 
|  | } | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* Returns true if any channel is still open. */ | 
|  | int | 
|  | channel_still_open(void) | 
|  | { | 
|  | u_int i; | 
|  | Channel *c; | 
|  |  | 
|  | for (i = 0; i < channels_alloc; i++) { | 
|  | c = channels[i]; | 
|  | if (c == NULL) | 
|  | continue; | 
|  | switch (c->type) { | 
|  | case SSH_CHANNEL_X11_LISTENER: | 
|  | case SSH_CHANNEL_PORT_LISTENER: | 
|  | case SSH_CHANNEL_RPORT_LISTENER: | 
|  | case SSH_CHANNEL_MUX_LISTENER: | 
|  | case SSH_CHANNEL_CLOSED: | 
|  | case SSH_CHANNEL_AUTH_SOCKET: | 
|  | case SSH_CHANNEL_DYNAMIC: | 
|  | case SSH_CHANNEL_CONNECTING: | 
|  | case SSH_CHANNEL_ZOMBIE: | 
|  | case SSH_CHANNEL_ABANDONED: | 
|  | continue; | 
|  | case SSH_CHANNEL_LARVAL: | 
|  | if (!compat20) | 
|  | fatal("cannot happen: SSH_CHANNEL_LARVAL"); | 
|  | continue; | 
|  | case SSH_CHANNEL_OPENING: | 
|  | case SSH_CHANNEL_OPEN: | 
|  | case SSH_CHANNEL_X11_OPEN: | 
|  | case SSH_CHANNEL_MUX_CLIENT: | 
|  | return 1; | 
|  | case SSH_CHANNEL_INPUT_DRAINING: | 
|  | case SSH_CHANNEL_OUTPUT_DRAINING: | 
|  | if (!compat13) | 
|  | fatal("cannot happen: OUT_DRAIN"); | 
|  | return 1; | 
|  | default: | 
|  | fatal("channel_still_open: bad channel type %d", c->type); | 
|  | /* NOTREACHED */ | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Returns the id of an open channel suitable for keepaliving */ | 
|  | int | 
|  | channel_find_open(void) | 
|  | { | 
|  | u_int i; | 
|  | Channel *c; | 
|  |  | 
|  | for (i = 0; i < channels_alloc; i++) { | 
|  | c = channels[i]; | 
|  | if (c == NULL || c->remote_id < 0) | 
|  | continue; | 
|  | switch (c->type) { | 
|  | case SSH_CHANNEL_CLOSED: | 
|  | case SSH_CHANNEL_DYNAMIC: | 
|  | case SSH_CHANNEL_X11_LISTENER: | 
|  | case SSH_CHANNEL_PORT_LISTENER: | 
|  | case SSH_CHANNEL_RPORT_LISTENER: | 
|  | case SSH_CHANNEL_MUX_LISTENER: | 
|  | case SSH_CHANNEL_MUX_CLIENT: | 
|  | case SSH_CHANNEL_OPENING: | 
|  | case SSH_CHANNEL_CONNECTING: | 
|  | case SSH_CHANNEL_ZOMBIE: | 
|  | case SSH_CHANNEL_ABANDONED: | 
|  | continue; | 
|  | case SSH_CHANNEL_LARVAL: | 
|  | case SSH_CHANNEL_AUTH_SOCKET: | 
|  | case SSH_CHANNEL_OPEN: | 
|  | case SSH_CHANNEL_X11_OPEN: | 
|  | return i; | 
|  | case SSH_CHANNEL_INPUT_DRAINING: | 
|  | case SSH_CHANNEL_OUTPUT_DRAINING: | 
|  | if (!compat13) | 
|  | fatal("cannot happen: OUT_DRAIN"); | 
|  | return i; | 
|  | default: | 
|  | fatal("channel_find_open: bad channel type %d", c->type); | 
|  | /* NOTREACHED */ | 
|  | } | 
|  | } | 
|  | return -1; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Returns a message describing the currently open forwarded connections, | 
|  | * suitable for sending to the client.  The message contains crlf pairs for | 
|  | * newlines. | 
|  | */ | 
|  | char * | 
|  | channel_open_message(void) | 
|  | { | 
|  | Buffer buffer; | 
|  | Channel *c; | 
|  | char buf[1024], *cp; | 
|  | u_int i; | 
|  |  | 
|  | buffer_init(&buffer); | 
|  | snprintf(buf, sizeof buf, "The following connections are open:\r\n"); | 
|  | buffer_append(&buffer, buf, strlen(buf)); | 
|  | for (i = 0; i < channels_alloc; i++) { | 
|  | c = channels[i]; | 
|  | if (c == NULL) | 
|  | continue; | 
|  | switch (c->type) { | 
|  | case SSH_CHANNEL_X11_LISTENER: | 
|  | case SSH_CHANNEL_PORT_LISTENER: | 
|  | case SSH_CHANNEL_RPORT_LISTENER: | 
|  | case SSH_CHANNEL_CLOSED: | 
|  | case SSH_CHANNEL_AUTH_SOCKET: | 
|  | case SSH_CHANNEL_ZOMBIE: | 
|  | case SSH_CHANNEL_ABANDONED: | 
|  | case SSH_CHANNEL_MUX_CLIENT: | 
|  | case SSH_CHANNEL_MUX_LISTENER: | 
|  | continue; | 
|  | case SSH_CHANNEL_LARVAL: | 
|  | case SSH_CHANNEL_OPENING: | 
|  | case SSH_CHANNEL_CONNECTING: | 
|  | case SSH_CHANNEL_DYNAMIC: | 
|  | case SSH_CHANNEL_OPEN: | 
|  | case SSH_CHANNEL_X11_OPEN: | 
|  | case SSH_CHANNEL_INPUT_DRAINING: | 
|  | case SSH_CHANNEL_OUTPUT_DRAINING: | 
|  | snprintf(buf, sizeof buf, | 
|  | "  #%d %.300s (t%d r%d i%d/%d o%d/%d fd %d/%d cc %d)\r\n", | 
|  | c->self, c->remote_name, | 
|  | c->type, c->remote_id, | 
|  | c->istate, buffer_len(&c->input), | 
|  | c->ostate, buffer_len(&c->output), | 
|  | c->rfd, c->wfd, c->ctl_chan); | 
|  | buffer_append(&buffer, buf, strlen(buf)); | 
|  | continue; | 
|  | default: | 
|  | fatal("channel_open_message: bad channel type %d", c->type); | 
|  | /* NOTREACHED */ | 
|  | } | 
|  | } | 
|  | buffer_append(&buffer, "\0", 1); | 
|  | cp = xstrdup(buffer_ptr(&buffer)); | 
|  | buffer_free(&buffer); | 
|  | return cp; | 
|  | } | 
|  |  | 
|  | void | 
|  | channel_send_open(int id) | 
|  | { | 
|  | Channel *c = channel_lookup(id); | 
|  |  | 
|  | if (c == NULL) { | 
|  | logit("channel_send_open: %d: bad id", id); | 
|  | return; | 
|  | } | 
|  | debug2("channel %d: send open", id); | 
|  | packet_start(SSH2_MSG_CHANNEL_OPEN); | 
|  | packet_put_cstring(c->ctype); | 
|  | packet_put_int(c->self); | 
|  | packet_put_int(c->local_window); | 
|  | packet_put_int(c->local_maxpacket); | 
|  | packet_send(); | 
|  | } | 
|  |  | 
|  | void | 
|  | channel_request_start(int id, char *service, int wantconfirm) | 
|  | { | 
|  | Channel *c = channel_lookup(id); | 
|  |  | 
|  | if (c == NULL) { | 
|  | logit("channel_request_start: %d: unknown channel id", id); | 
|  | return; | 
|  | } | 
|  | debug2("channel %d: request %s confirm %d", id, service, wantconfirm); | 
|  | packet_start(SSH2_MSG_CHANNEL_REQUEST); | 
|  | packet_put_int(c->remote_id); | 
|  | packet_put_cstring(service); | 
|  | packet_put_char(wantconfirm); | 
|  | } | 
|  |  | 
|  | void | 
|  | channel_register_status_confirm(int id, channel_confirm_cb *cb, | 
|  | channel_confirm_abandon_cb *abandon_cb, void *ctx) | 
|  | { | 
|  | struct channel_confirm *cc; | 
|  | Channel *c; | 
|  |  | 
|  | if ((c = channel_lookup(id)) == NULL) | 
|  | fatal("channel_register_expect: %d: bad id", id); | 
|  |  | 
|  | cc = xcalloc(1, sizeof(*cc)); | 
|  | cc->cb = cb; | 
|  | cc->abandon_cb = abandon_cb; | 
|  | cc->ctx = ctx; | 
|  | TAILQ_INSERT_TAIL(&c->status_confirms, cc, entry); | 
|  | } | 
|  |  | 
|  | void | 
|  | channel_register_open_confirm(int id, channel_open_fn *fn, void *ctx) | 
|  | { | 
|  | Channel *c = channel_lookup(id); | 
|  |  | 
|  | if (c == NULL) { | 
|  | logit("channel_register_open_confirm: %d: bad id", id); | 
|  | return; | 
|  | } | 
|  | c->open_confirm = fn; | 
|  | c->open_confirm_ctx = ctx; | 
|  | } | 
|  |  | 
|  | void | 
|  | channel_register_cleanup(int id, channel_callback_fn *fn, int do_close) | 
|  | { | 
|  | Channel *c = channel_by_id(id); | 
|  |  | 
|  | if (c == NULL) { | 
|  | logit("channel_register_cleanup: %d: bad id", id); | 
|  | return; | 
|  | } | 
|  | c->detach_user = fn; | 
|  | c->detach_close = do_close; | 
|  | } | 
|  |  | 
|  | void | 
|  | channel_cancel_cleanup(int id) | 
|  | { | 
|  | Channel *c = channel_by_id(id); | 
|  |  | 
|  | if (c == NULL) { | 
|  | logit("channel_cancel_cleanup: %d: bad id", id); | 
|  | return; | 
|  | } | 
|  | c->detach_user = NULL; | 
|  | c->detach_close = 0; | 
|  | } | 
|  |  | 
|  | void | 
|  | channel_register_filter(int id, channel_infilter_fn *ifn, | 
|  | channel_outfilter_fn *ofn, channel_filter_cleanup_fn *cfn, void *ctx) | 
|  | { | 
|  | Channel *c = channel_lookup(id); | 
|  |  | 
|  | if (c == NULL) { | 
|  | logit("channel_register_filter: %d: bad id", id); | 
|  | return; | 
|  | } | 
|  | c->input_filter = ifn; | 
|  | c->output_filter = ofn; | 
|  | c->filter_ctx = ctx; | 
|  | c->filter_cleanup = cfn; | 
|  | } | 
|  |  | 
|  | void | 
|  | channel_set_fds(int id, int rfd, int wfd, int efd, | 
|  | int extusage, int nonblock, int is_tty, u_int window_max) | 
|  | { | 
|  | Channel *c = channel_lookup(id); | 
|  |  | 
|  | if (c == NULL || c->type != SSH_CHANNEL_LARVAL) | 
|  | fatal("channel_activate for non-larval channel %d.", id); | 
|  | channel_register_fds(c, rfd, wfd, efd, extusage, nonblock, is_tty); | 
|  | c->type = SSH_CHANNEL_OPEN; | 
|  | c->local_window = c->local_window_max = window_max; | 
|  | packet_start(SSH2_MSG_CHANNEL_WINDOW_ADJUST); | 
|  | packet_put_int(c->remote_id); | 
|  | packet_put_int(c->local_window); | 
|  | packet_send(); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * 'channel_pre*' are called just before select() to add any bits relevant to | 
|  | * channels in the select bitmasks. | 
|  | */ | 
|  | /* | 
|  | * 'channel_post*': perform any appropriate operations for channels which | 
|  | * have events pending. | 
|  | */ | 
|  | typedef void chan_fn(Channel *c, fd_set *readset, fd_set *writeset); | 
|  | chan_fn *channel_pre[SSH_CHANNEL_MAX_TYPE]; | 
|  | chan_fn *channel_post[SSH_CHANNEL_MAX_TYPE]; | 
|  |  | 
|  | /* ARGSUSED */ | 
|  | static void | 
|  | channel_pre_listener(Channel *c, fd_set *readset, fd_set *writeset) | 
|  | { | 
|  | FD_SET(c->sock, readset); | 
|  | } | 
|  |  | 
|  | /* ARGSUSED */ | 
|  | static void | 
|  | channel_pre_connecting(Channel *c, fd_set *readset, fd_set *writeset) | 
|  | { | 
|  | debug3("channel %d: waiting for connection", c->self); | 
|  | FD_SET(c->sock, writeset); | 
|  | } | 
|  |  | 
|  | static void | 
|  | channel_pre_open_13(Channel *c, fd_set *readset, fd_set *writeset) | 
|  | { | 
|  | if (buffer_len(&c->input) < packet_get_maxsize()) | 
|  | FD_SET(c->sock, readset); | 
|  | if (buffer_len(&c->output) > 0) | 
|  | FD_SET(c->sock, writeset); | 
|  | } | 
|  |  | 
|  | static void | 
|  | channel_pre_open(Channel *c, fd_set *readset, fd_set *writeset) | 
|  | { | 
|  | u_int limit = compat20 ? c->remote_window : packet_get_maxsize(); | 
|  |  | 
|  | if (c->istate == CHAN_INPUT_OPEN && | 
|  | limit > 0 && | 
|  | buffer_len(&c->input) < limit && | 
|  | buffer_check_alloc(&c->input, CHAN_RBUF)) | 
|  | FD_SET(c->rfd, readset); | 
|  | if (c->ostate == CHAN_OUTPUT_OPEN || | 
|  | c->ostate == CHAN_OUTPUT_WAIT_DRAIN) { | 
|  | if (buffer_len(&c->output) > 0) { | 
|  | FD_SET(c->wfd, writeset); | 
|  | } else if (c->ostate == CHAN_OUTPUT_WAIT_DRAIN) { | 
|  | if (CHANNEL_EFD_OUTPUT_ACTIVE(c)) | 
|  | debug2("channel %d: obuf_empty delayed efd %d/(%d)", | 
|  | c->self, c->efd, buffer_len(&c->extended)); | 
|  | else | 
|  | chan_obuf_empty(c); | 
|  | } | 
|  | } | 
|  | /** XXX check close conditions, too */ | 
|  | if (compat20 && c->efd != -1 && | 
|  | !(c->istate == CHAN_INPUT_CLOSED && c->ostate == CHAN_OUTPUT_CLOSED)) { | 
|  | if (c->extended_usage == CHAN_EXTENDED_WRITE && | 
|  | buffer_len(&c->extended) > 0) | 
|  | FD_SET(c->efd, writeset); | 
|  | else if (c->efd != -1 && !(c->flags & CHAN_EOF_SENT) && | 
|  | (c->extended_usage == CHAN_EXTENDED_READ || | 
|  | c->extended_usage == CHAN_EXTENDED_IGNORE) && | 
|  | buffer_len(&c->extended) < c->remote_window) | 
|  | FD_SET(c->efd, readset); | 
|  | } | 
|  | /* XXX: What about efd? races? */ | 
|  | } | 
|  |  | 
|  | /* ARGSUSED */ | 
|  | static void | 
|  | channel_pre_input_draining(Channel *c, fd_set *readset, fd_set *writeset) | 
|  | { | 
|  | if (buffer_len(&c->input) == 0) { | 
|  | packet_start(SSH_MSG_CHANNEL_CLOSE); | 
|  | packet_put_int(c->remote_id); | 
|  | packet_send(); | 
|  | c->type = SSH_CHANNEL_CLOSED; | 
|  | debug2("channel %d: closing after input drain.", c->self); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* ARGSUSED */ | 
|  | static void | 
|  | channel_pre_output_draining(Channel *c, fd_set *readset, fd_set *writeset) | 
|  | { | 
|  | if (buffer_len(&c->output) == 0) | 
|  | chan_mark_dead(c); | 
|  | else | 
|  | FD_SET(c->sock, writeset); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This is a special state for X11 authentication spoofing.  An opened X11 | 
|  | * connection (when authentication spoofing is being done) remains in this | 
|  | * state until the first packet has been completely read.  The authentication | 
|  | * data in that packet is then substituted by the real data if it matches the | 
|  | * fake data, and the channel is put into normal mode. | 
|  | * XXX All this happens at the client side. | 
|  | * Returns: 0 = need more data, -1 = wrong cookie, 1 = ok | 
|  | */ | 
|  | static int | 
|  | x11_open_helper(Buffer *b) | 
|  | { | 
|  | u_char *ucp; | 
|  | u_int proto_len, data_len; | 
|  |  | 
|  | /* Check if the fixed size part of the packet is in buffer. */ | 
|  | if (buffer_len(b) < 12) | 
|  | return 0; | 
|  |  | 
|  | /* Parse the lengths of variable-length fields. */ | 
|  | ucp = buffer_ptr(b); | 
|  | if (ucp[0] == 0x42) {	/* Byte order MSB first. */ | 
|  | proto_len = 256 * ucp[6] + ucp[7]; | 
|  | data_len = 256 * ucp[8] + ucp[9]; | 
|  | } else if (ucp[0] == 0x6c) {	/* Byte order LSB first. */ | 
|  | proto_len = ucp[6] + 256 * ucp[7]; | 
|  | data_len = ucp[8] + 256 * ucp[9]; | 
|  | } else { | 
|  | debug2("Initial X11 packet contains bad byte order byte: 0x%x", | 
|  | ucp[0]); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | /* Check if the whole packet is in buffer. */ | 
|  | if (buffer_len(b) < | 
|  | 12 + ((proto_len + 3) & ~3) + ((data_len + 3) & ~3)) | 
|  | return 0; | 
|  |  | 
|  | /* Check if authentication protocol matches. */ | 
|  | if (proto_len != strlen(x11_saved_proto) || | 
|  | memcmp(ucp + 12, x11_saved_proto, proto_len) != 0) { | 
|  | debug2("X11 connection uses different authentication protocol."); | 
|  | return -1; | 
|  | } | 
|  | /* Check if authentication data matches our fake data. */ | 
|  | if (data_len != x11_fake_data_len || | 
|  | timingsafe_bcmp(ucp + 12 + ((proto_len + 3) & ~3), | 
|  | x11_fake_data, x11_fake_data_len) != 0) { | 
|  | debug2("X11 auth data does not match fake data."); | 
|  | return -1; | 
|  | } | 
|  | /* Check fake data length */ | 
|  | if (x11_fake_data_len != x11_saved_data_len) { | 
|  | error("X11 fake_data_len %d != saved_data_len %d", | 
|  | x11_fake_data_len, x11_saved_data_len); | 
|  | return -1; | 
|  | } | 
|  | /* | 
|  | * Received authentication protocol and data match | 
|  | * our fake data. Substitute the fake data with real | 
|  | * data. | 
|  | */ | 
|  | memcpy(ucp + 12 + ((proto_len + 3) & ~3), | 
|  | x11_saved_data, x11_saved_data_len); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static void | 
|  | channel_pre_x11_open_13(Channel *c, fd_set *readset, fd_set *writeset) | 
|  | { | 
|  | int ret = x11_open_helper(&c->output); | 
|  |  | 
|  | if (ret == 1) { | 
|  | /* Start normal processing for the channel. */ | 
|  | c->type = SSH_CHANNEL_OPEN; | 
|  | channel_pre_open_13(c, readset, writeset); | 
|  | } else if (ret == -1) { | 
|  | /* | 
|  | * We have received an X11 connection that has bad | 
|  | * authentication information. | 
|  | */ | 
|  | logit("X11 connection rejected because of wrong authentication."); | 
|  | buffer_clear(&c->input); | 
|  | buffer_clear(&c->output); | 
|  | channel_close_fd(&c->sock); | 
|  | c->sock = -1; | 
|  | c->type = SSH_CHANNEL_CLOSED; | 
|  | packet_start(SSH_MSG_CHANNEL_CLOSE); | 
|  | packet_put_int(c->remote_id); | 
|  | packet_send(); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void | 
|  | channel_pre_x11_open(Channel *c, fd_set *readset, fd_set *writeset) | 
|  | { | 
|  | int ret = x11_open_helper(&c->output); | 
|  |  | 
|  | /* c->force_drain = 1; */ | 
|  |  | 
|  | if (ret == 1) { | 
|  | c->type = SSH_CHANNEL_OPEN; | 
|  | channel_pre_open(c, readset, writeset); | 
|  | } else if (ret == -1) { | 
|  | logit("X11 connection rejected because of wrong authentication."); | 
|  | debug2("X11 rejected %d i%d/o%d", c->self, c->istate, c->ostate); | 
|  | chan_read_failed(c); | 
|  | buffer_clear(&c->input); | 
|  | chan_ibuf_empty(c); | 
|  | buffer_clear(&c->output); | 
|  | /* for proto v1, the peer will send an IEOF */ | 
|  | if (compat20) | 
|  | chan_write_failed(c); | 
|  | else | 
|  | c->type = SSH_CHANNEL_OPEN; | 
|  | debug2("X11 closed %d i%d/o%d", c->self, c->istate, c->ostate); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void | 
|  | channel_pre_mux_client(Channel *c, fd_set *readset, fd_set *writeset) | 
|  | { | 
|  | if (c->istate == CHAN_INPUT_OPEN && !c->mux_pause && | 
|  | buffer_check_alloc(&c->input, CHAN_RBUF)) | 
|  | FD_SET(c->rfd, readset); | 
|  | if (c->istate == CHAN_INPUT_WAIT_DRAIN) { | 
|  | /* clear buffer immediately (discard any partial packet) */ | 
|  | buffer_clear(&c->input); | 
|  | chan_ibuf_empty(c); | 
|  | /* Start output drain. XXX just kill chan? */ | 
|  | chan_rcvd_oclose(c); | 
|  | } | 
|  | if (c->ostate == CHAN_OUTPUT_OPEN || | 
|  | c->ostate == CHAN_OUTPUT_WAIT_DRAIN) { | 
|  | if (buffer_len(&c->output) > 0) | 
|  | FD_SET(c->wfd, writeset); | 
|  | else if (c->ostate == CHAN_OUTPUT_WAIT_DRAIN) | 
|  | chan_obuf_empty(c); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* try to decode a socks4 header */ | 
|  | /* ARGSUSED */ | 
|  | static int | 
|  | channel_decode_socks4(Channel *c, fd_set *readset, fd_set *writeset) | 
|  | { | 
|  | char *p, *host; | 
|  | u_int len, have, i, found, need; | 
|  | char username[256]; | 
|  | struct { | 
|  | u_int8_t version; | 
|  | u_int8_t command; | 
|  | u_int16_t dest_port; | 
|  | struct in_addr dest_addr; | 
|  | } s4_req, s4_rsp; | 
|  |  | 
|  | debug2("channel %d: decode socks4", c->self); | 
|  |  | 
|  | have = buffer_len(&c->input); | 
|  | len = sizeof(s4_req); | 
|  | if (have < len) | 
|  | return 0; | 
|  | p = buffer_ptr(&c->input); | 
|  |  | 
|  | need = 1; | 
|  | /* SOCKS4A uses an invalid IP address 0.0.0.x */ | 
|  | if (p[4] == 0 && p[5] == 0 && p[6] == 0 && p[7] != 0) { | 
|  | debug2("channel %d: socks4a request", c->self); | 
|  | /* ... and needs an extra string (the hostname) */ | 
|  | need = 2; | 
|  | } | 
|  | /* Check for terminating NUL on the string(s) */ | 
|  | for (found = 0, i = len; i < have; i++) { | 
|  | if (p[i] == '\0') { | 
|  | found++; | 
|  | if (found == need) | 
|  | break; | 
|  | } | 
|  | if (i > 1024) { | 
|  | /* the peer is probably sending garbage */ | 
|  | debug("channel %d: decode socks4: too long", | 
|  | c->self); | 
|  | return -1; | 
|  | } | 
|  | } | 
|  | if (found < need) | 
|  | return 0; | 
|  | buffer_get(&c->input, (char *)&s4_req.version, 1); | 
|  | buffer_get(&c->input, (char *)&s4_req.command, 1); | 
|  | buffer_get(&c->input, (char *)&s4_req.dest_port, 2); | 
|  | buffer_get(&c->input, (char *)&s4_req.dest_addr, 4); | 
|  | have = buffer_len(&c->input); | 
|  | p = buffer_ptr(&c->input); | 
|  | if (memchr(p, '\0', have) == NULL) | 
|  | fatal("channel %d: decode socks4: user not nul terminated", | 
|  | c->self); | 
|  | len = strlen(p); | 
|  | debug2("channel %d: decode socks4: user %s/%d", c->self, p, len); | 
|  | len++;					/* trailing '\0' */ | 
|  | if (len > have) | 
|  | fatal("channel %d: decode socks4: len %d > have %d", | 
|  | c->self, len, have); | 
|  | strlcpy(username, p, sizeof(username)); | 
|  | buffer_consume(&c->input, len); | 
|  |  | 
|  | free(c->path); | 
|  | c->path = NULL; | 
|  | if (need == 1) {			/* SOCKS4: one string */ | 
|  | host = inet_ntoa(s4_req.dest_addr); | 
|  | c->path = xstrdup(host); | 
|  | } else {				/* SOCKS4A: two strings */ | 
|  | have = buffer_len(&c->input); | 
|  | p = buffer_ptr(&c->input); | 
|  | len = strlen(p); | 
|  | debug2("channel %d: decode socks4a: host %s/%d", | 
|  | c->self, p, len); | 
|  | len++;				/* trailing '\0' */ | 
|  | if (len > have) | 
|  | fatal("channel %d: decode socks4a: len %d > have %d", | 
|  | c->self, len, have); | 
|  | if (len > NI_MAXHOST) { | 
|  | error("channel %d: hostname \"%.100s\" too long", | 
|  | c->self, p); | 
|  | return -1; | 
|  | } | 
|  | c->path = xstrdup(p); | 
|  | buffer_consume(&c->input, len); | 
|  | } | 
|  | c->host_port = ntohs(s4_req.dest_port); | 
|  |  | 
|  | debug2("channel %d: dynamic request: socks4 host %s port %u command %u", | 
|  | c->self, c->path, c->host_port, s4_req.command); | 
|  |  | 
|  | if (s4_req.command != 1) { | 
|  | debug("channel %d: cannot handle: %s cn %d", | 
|  | c->self, need == 1 ? "SOCKS4" : "SOCKS4A", s4_req.command); | 
|  | return -1; | 
|  | } | 
|  | s4_rsp.version = 0;			/* vn: 0 for reply */ | 
|  | s4_rsp.command = 90;			/* cd: req granted */ | 
|  | s4_rsp.dest_port = 0;			/* ignored */ | 
|  | s4_rsp.dest_addr.s_addr = INADDR_ANY;	/* ignored */ | 
|  | buffer_append(&c->output, &s4_rsp, sizeof(s4_rsp)); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* try to decode a socks5 header */ | 
|  | #define SSH_SOCKS5_AUTHDONE	0x1000 | 
|  | #define SSH_SOCKS5_NOAUTH	0x00 | 
|  | #define SSH_SOCKS5_IPV4		0x01 | 
|  | #define SSH_SOCKS5_DOMAIN	0x03 | 
|  | #define SSH_SOCKS5_IPV6		0x04 | 
|  | #define SSH_SOCKS5_CONNECT	0x01 | 
|  | #define SSH_SOCKS5_SUCCESS	0x00 | 
|  |  | 
|  | /* ARGSUSED */ | 
|  | static int | 
|  | channel_decode_socks5(Channel *c, fd_set *readset, fd_set *writeset) | 
|  | { | 
|  | struct { | 
|  | u_int8_t version; | 
|  | u_int8_t command; | 
|  | u_int8_t reserved; | 
|  | u_int8_t atyp; | 
|  | } s5_req, s5_rsp; | 
|  | u_int16_t dest_port; | 
|  | char dest_addr[255+1], ntop[INET6_ADDRSTRLEN]; | 
|  | u_char *p; | 
|  | u_int have, need, i, found, nmethods, addrlen, af; | 
|  |  | 
|  | debug2("channel %d: decode socks5", c->self); | 
|  | p = buffer_ptr(&c->input); | 
|  | if (p[0] != 0x05) | 
|  | return -1; | 
|  | have = buffer_len(&c->input); | 
|  | if (!(c->flags & SSH_SOCKS5_AUTHDONE)) { | 
|  | /* format: ver | nmethods | methods */ | 
|  | if (have < 2) | 
|  | return 0; | 
|  | nmethods = p[1]; | 
|  | if (have < nmethods + 2) | 
|  | return 0; | 
|  | /* look for method: "NO AUTHENTICATION REQUIRED" */ | 
|  | for (found = 0, i = 2; i < nmethods + 2; i++) { | 
|  | if (p[i] == SSH_SOCKS5_NOAUTH) { | 
|  | found = 1; | 
|  | break; | 
|  | } | 
|  | } | 
|  | if (!found) { | 
|  | debug("channel %d: method SSH_SOCKS5_NOAUTH not found", | 
|  | c->self); | 
|  | return -1; | 
|  | } | 
|  | buffer_consume(&c->input, nmethods + 2); | 
|  | buffer_put_char(&c->output, 0x05);		/* version */ | 
|  | buffer_put_char(&c->output, SSH_SOCKS5_NOAUTH);	/* method */ | 
|  | FD_SET(c->sock, writeset); | 
|  | c->flags |= SSH_SOCKS5_AUTHDONE; | 
|  | debug2("channel %d: socks5 auth done", c->self); | 
|  | return 0;				/* need more */ | 
|  | } | 
|  | debug2("channel %d: socks5 post auth", c->self); | 
|  | if (have < sizeof(s5_req)+1) | 
|  | return 0;			/* need more */ | 
|  | memcpy(&s5_req, p, sizeof(s5_req)); | 
|  | if (s5_req.version != 0x05 || | 
|  | s5_req.command != SSH_SOCKS5_CONNECT || | 
|  | s5_req.reserved != 0x00) { | 
|  | debug2("channel %d: only socks5 connect supported", c->self); | 
|  | return -1; | 
|  | } | 
|  | switch (s5_req.atyp){ | 
|  | case SSH_SOCKS5_IPV4: | 
|  | addrlen = 4; | 
|  | af = AF_INET; | 
|  | break; | 
|  | case SSH_SOCKS5_DOMAIN: | 
|  | addrlen = p[sizeof(s5_req)]; | 
|  | af = -1; | 
|  | break; | 
|  | case SSH_SOCKS5_IPV6: | 
|  | addrlen = 16; | 
|  | af = AF_INET6; | 
|  | break; | 
|  | default: | 
|  | debug2("channel %d: bad socks5 atyp %d", c->self, s5_req.atyp); | 
|  | return -1; | 
|  | } | 
|  | need = sizeof(s5_req) + addrlen + 2; | 
|  | if (s5_req.atyp == SSH_SOCKS5_DOMAIN) | 
|  | need++; | 
|  | if (have < need) | 
|  | return 0; | 
|  | buffer_consume(&c->input, sizeof(s5_req)); | 
|  | if (s5_req.atyp == SSH_SOCKS5_DOMAIN) | 
|  | buffer_consume(&c->input, 1);    /* host string length */ | 
|  | buffer_get(&c->input, &dest_addr, addrlen); | 
|  | buffer_get(&c->input, (char *)&dest_port, 2); | 
|  | dest_addr[addrlen] = '\0'; | 
|  | free(c->path); | 
|  | c->path = NULL; | 
|  | if (s5_req.atyp == SSH_SOCKS5_DOMAIN) { | 
|  | if (addrlen >= NI_MAXHOST) { | 
|  | error("channel %d: dynamic request: socks5 hostname " | 
|  | "\"%.100s\" too long", c->self, dest_addr); | 
|  | return -1; | 
|  | } | 
|  | c->path = xstrdup(dest_addr); | 
|  | } else { | 
|  | if (inet_ntop(af, dest_addr, ntop, sizeof(ntop)) == NULL) | 
|  | return -1; | 
|  | c->path = xstrdup(ntop); | 
|  | } | 
|  | c->host_port = ntohs(dest_port); | 
|  |  | 
|  | debug2("channel %d: dynamic request: socks5 host %s port %u command %u", | 
|  | c->self, c->path, c->host_port, s5_req.command); | 
|  |  | 
|  | s5_rsp.version = 0x05; | 
|  | s5_rsp.command = SSH_SOCKS5_SUCCESS; | 
|  | s5_rsp.reserved = 0;			/* ignored */ | 
|  | s5_rsp.atyp = SSH_SOCKS5_IPV4; | 
|  | dest_port = 0;				/* ignored */ | 
|  |  | 
|  | buffer_append(&c->output, &s5_rsp, sizeof(s5_rsp)); | 
|  | buffer_put_int(&c->output, ntohl(INADDR_ANY)); /* bind address */ | 
|  | buffer_append(&c->output, &dest_port, sizeof(dest_port)); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | Channel * | 
|  | channel_connect_stdio_fwd(const char *host_to_connect, u_short port_to_connect, | 
|  | int in, int out) | 
|  | { | 
|  | Channel *c; | 
|  |  | 
|  | debug("channel_connect_stdio_fwd %s:%d", host_to_connect, | 
|  | port_to_connect); | 
|  |  | 
|  | c = channel_new("stdio-forward", SSH_CHANNEL_OPENING, in, out, | 
|  | -1, CHAN_TCP_WINDOW_DEFAULT, CHAN_TCP_PACKET_DEFAULT, | 
|  | 0, "stdio-forward", /*nonblock*/0); | 
|  |  | 
|  | c->path = xstrdup(host_to_connect); | 
|  | c->host_port = port_to_connect; | 
|  | c->listening_port = 0; | 
|  | c->force_drain = 1; | 
|  |  | 
|  | channel_register_fds(c, in, out, -1, 0, 1, 0); | 
|  | port_open_helper(c, "direct-tcpip"); | 
|  |  | 
|  | return c; | 
|  | } | 
|  |  | 
|  | /* dynamic port forwarding */ | 
|  | static void | 
|  | channel_pre_dynamic(Channel *c, fd_set *readset, fd_set *writeset) | 
|  | { | 
|  | u_char *p; | 
|  | u_int have; | 
|  | int ret; | 
|  |  | 
|  | have = buffer_len(&c->input); | 
|  | debug2("channel %d: pre_dynamic: have %d", c->self, have); | 
|  | /* buffer_dump(&c->input); */ | 
|  | /* check if the fixed size part of the packet is in buffer. */ | 
|  | if (have < 3) { | 
|  | /* need more */ | 
|  | FD_SET(c->sock, readset); | 
|  | return; | 
|  | } | 
|  | /* try to guess the protocol */ | 
|  | p = buffer_ptr(&c->input); | 
|  | switch (p[0]) { | 
|  | case 0x04: | 
|  | ret = channel_decode_socks4(c, readset, writeset); | 
|  | break; | 
|  | case 0x05: | 
|  | ret = channel_decode_socks5(c, readset, writeset); | 
|  | break; | 
|  | default: | 
|  | ret = -1; | 
|  | break; | 
|  | } | 
|  | if (ret < 0) { | 
|  | chan_mark_dead(c); | 
|  | } else if (ret == 0) { | 
|  | debug2("channel %d: pre_dynamic: need more", c->self); | 
|  | /* need more */ | 
|  | FD_SET(c->sock, readset); | 
|  | } else { | 
|  | /* switch to the next state */ | 
|  | c->type = SSH_CHANNEL_OPENING; | 
|  | port_open_helper(c, "direct-tcpip"); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* This is our fake X11 server socket. */ | 
|  | /* ARGSUSED */ | 
|  | static void | 
|  | channel_post_x11_listener(Channel *c, fd_set *readset, fd_set *writeset) | 
|  | { | 
|  | Channel *nc; | 
|  | struct sockaddr_storage addr; | 
|  | int newsock, oerrno; | 
|  | socklen_t addrlen; | 
|  | char buf[16384], *remote_ipaddr; | 
|  | int remote_port; | 
|  |  | 
|  | if (FD_ISSET(c->sock, readset)) { | 
|  | debug("X11 connection requested."); | 
|  | addrlen = sizeof(addr); | 
|  | newsock = accept(c->sock, (struct sockaddr *)&addr, &addrlen); | 
|  | if (c->single_connection) { | 
|  | oerrno = errno; | 
|  | debug2("single_connection: closing X11 listener."); | 
|  | channel_close_fd(&c->sock); | 
|  | chan_mark_dead(c); | 
|  | errno = oerrno; | 
|  | } | 
|  | if (newsock < 0) { | 
|  | if (errno != EINTR && errno != EWOULDBLOCK && | 
|  | errno != ECONNABORTED) | 
|  | error("accept: %.100s", strerror(errno)); | 
|  | if (errno == EMFILE || errno == ENFILE) | 
|  | c->notbefore = monotime() + 1; | 
|  | return; | 
|  | } | 
|  | set_nodelay(newsock); | 
|  | remote_ipaddr = get_peer_ipaddr(newsock); | 
|  | remote_port = get_peer_port(newsock); | 
|  | snprintf(buf, sizeof buf, "X11 connection from %.200s port %d", | 
|  | remote_ipaddr, remote_port); | 
|  |  | 
|  | nc = channel_new("accepted x11 socket", | 
|  | SSH_CHANNEL_OPENING, newsock, newsock, -1, | 
|  | c->local_window_max, c->local_maxpacket, 0, buf, 1); | 
|  | if (compat20) { | 
|  | packet_start(SSH2_MSG_CHANNEL_OPEN); | 
|  | packet_put_cstring("x11"); | 
|  | packet_put_int(nc->self); | 
|  | packet_put_int(nc->local_window_max); | 
|  | packet_put_int(nc->local_maxpacket); | 
|  | /* originator ipaddr and port */ | 
|  | packet_put_cstring(remote_ipaddr); | 
|  | if (datafellows & SSH_BUG_X11FWD) { | 
|  | debug2("ssh2 x11 bug compat mode"); | 
|  | } else { | 
|  | packet_put_int(remote_port); | 
|  | } | 
|  | packet_send(); | 
|  | } else { | 
|  | packet_start(SSH_SMSG_X11_OPEN); | 
|  | packet_put_int(nc->self); | 
|  | if (packet_get_protocol_flags() & | 
|  | SSH_PROTOFLAG_HOST_IN_FWD_OPEN) | 
|  | packet_put_cstring(buf); | 
|  | packet_send(); | 
|  | } | 
|  | free(remote_ipaddr); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void | 
|  | port_open_helper(Channel *c, char *rtype) | 
|  | { | 
|  | int direct; | 
|  | char buf[1024]; | 
|  | char *local_ipaddr = get_local_ipaddr(c->sock); | 
|  | int local_port = c->sock == -1 ? 65536 : get_sock_port(c->sock, 1); | 
|  | char *remote_ipaddr = get_peer_ipaddr(c->sock); | 
|  | int remote_port = get_peer_port(c->sock); | 
|  |  | 
|  | if (remote_port == -1) { | 
|  | /* Fake addr/port to appease peers that validate it (Tectia) */ | 
|  | free(remote_ipaddr); | 
|  | remote_ipaddr = xstrdup("127.0.0.1"); | 
|  | remote_port = 65535; | 
|  | } | 
|  |  | 
|  | direct = (strcmp(rtype, "direct-tcpip") == 0); | 
|  |  | 
|  | snprintf(buf, sizeof buf, | 
|  | "%s: listening port %d for %.100s port %d, " | 
|  | "connect from %.200s port %d to %.100s port %d", | 
|  | rtype, c->listening_port, c->path, c->host_port, | 
|  | remote_ipaddr, remote_port, local_ipaddr, local_port); | 
|  |  | 
|  | free(c->remote_name); | 
|  | c->remote_name = xstrdup(buf); | 
|  |  | 
|  | if (compat20) { | 
|  | packet_start(SSH2_MSG_CHANNEL_OPEN); | 
|  | packet_put_cstring(rtype); | 
|  | packet_put_int(c->self); | 
|  | packet_put_int(c->local_window_max); | 
|  | packet_put_int(c->local_maxpacket); | 
|  | if (direct) { | 
|  | /* target host, port */ | 
|  | packet_put_cstring(c->path); | 
|  | packet_put_int(c->host_port); | 
|  | } else { | 
|  | /* listen address, port */ | 
|  | packet_put_cstring(c->path); | 
|  | packet_put_int(local_port); | 
|  | } | 
|  | /* originator host and port */ | 
|  | packet_put_cstring(remote_ipaddr); | 
|  | packet_put_int((u_int)remote_port); | 
|  | packet_send(); | 
|  | } else { | 
|  | packet_start(SSH_MSG_PORT_OPEN); | 
|  | packet_put_int(c->self); | 
|  | packet_put_cstring(c->path); | 
|  | packet_put_int(c->host_port); | 
|  | if (packet_get_protocol_flags() & | 
|  | SSH_PROTOFLAG_HOST_IN_FWD_OPEN) | 
|  | packet_put_cstring(c->remote_name); | 
|  | packet_send(); | 
|  | } | 
|  | free(remote_ipaddr); | 
|  | free(local_ipaddr); | 
|  | } | 
|  |  | 
|  | static void | 
|  | channel_set_reuseaddr(int fd) | 
|  | { | 
|  | int on = 1; | 
|  |  | 
|  | /* | 
|  | * Set socket options. | 
|  | * Allow local port reuse in TIME_WAIT. | 
|  | */ | 
|  | if (setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &on, sizeof(on)) == -1) | 
|  | error("setsockopt SO_REUSEADDR fd %d: %s", fd, strerror(errno)); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This socket is listening for connections to a forwarded TCP/IP port. | 
|  | */ | 
|  | /* ARGSUSED */ | 
|  | static void | 
|  | channel_post_port_listener(Channel *c, fd_set *readset, fd_set *writeset) | 
|  | { | 
|  | Channel *nc; | 
|  | struct sockaddr_storage addr; | 
|  | int newsock, nextstate; | 
|  | socklen_t addrlen; | 
|  | char *rtype; | 
|  |  | 
|  | if (FD_ISSET(c->sock, readset)) { | 
|  | debug("Connection to port %d forwarding " | 
|  | "to %.100s port %d requested.", | 
|  | c->listening_port, c->path, c->host_port); | 
|  |  | 
|  | if (c->type == SSH_CHANNEL_RPORT_LISTENER) { | 
|  | nextstate = SSH_CHANNEL_OPENING; | 
|  | rtype = "forwarded-tcpip"; | 
|  | } else { | 
|  | if (c->host_port == 0) { | 
|  | nextstate = SSH_CHANNEL_DYNAMIC; | 
|  | rtype = "dynamic-tcpip"; | 
|  | } else { | 
|  | nextstate = SSH_CHANNEL_OPENING; | 
|  | rtype = "direct-tcpip"; | 
|  | } | 
|  | } | 
|  |  | 
|  | addrlen = sizeof(addr); | 
|  | newsock = accept(c->sock, (struct sockaddr *)&addr, &addrlen); | 
|  | if (newsock < 0) { | 
|  | if (errno != EINTR && errno != EWOULDBLOCK && | 
|  | errno != ECONNABORTED) | 
|  | error("accept: %.100s", strerror(errno)); | 
|  | if (errno == EMFILE || errno == ENFILE) | 
|  | c->notbefore = monotime() + 1; | 
|  | return; | 
|  | } | 
|  | set_nodelay(newsock); | 
|  | nc = channel_new(rtype, nextstate, newsock, newsock, -1, | 
|  | c->local_window_max, c->local_maxpacket, 0, rtype, 1); | 
|  | nc->listening_port = c->listening_port; | 
|  | nc->host_port = c->host_port; | 
|  | if (c->path != NULL) | 
|  | nc->path = xstrdup(c->path); | 
|  |  | 
|  | if (nextstate != SSH_CHANNEL_DYNAMIC) | 
|  | port_open_helper(nc, rtype); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This is the authentication agent socket listening for connections from | 
|  | * clients. | 
|  | */ | 
|  | /* ARGSUSED */ | 
|  | static void | 
|  | channel_post_auth_listener(Channel *c, fd_set *readset, fd_set *writeset) | 
|  | { | 
|  | Channel *nc; | 
|  | int newsock; | 
|  | struct sockaddr_storage addr; | 
|  | socklen_t addrlen; | 
|  |  | 
|  | if (FD_ISSET(c->sock, readset)) { | 
|  | addrlen = sizeof(addr); | 
|  | newsock = accept(c->sock, (struct sockaddr *)&addr, &addrlen); | 
|  | if (newsock < 0) { | 
|  | error("accept from auth socket: %.100s", | 
|  | strerror(errno)); | 
|  | if (errno == EMFILE || errno == ENFILE) | 
|  | c->notbefore = monotime() + 1; | 
|  | return; | 
|  | } | 
|  | nc = channel_new("accepted auth socket", | 
|  | SSH_CHANNEL_OPENING, newsock, newsock, -1, | 
|  | c->local_window_max, c->local_maxpacket, | 
|  | 0, "accepted auth socket", 1); | 
|  | if (compat20) { | 
|  | packet_start(SSH2_MSG_CHANNEL_OPEN); | 
|  | packet_put_cstring("auth-agent@openssh.com"); | 
|  | packet_put_int(nc->self); | 
|  | packet_put_int(c->local_window_max); | 
|  | packet_put_int(c->local_maxpacket); | 
|  | } else { | 
|  | packet_start(SSH_SMSG_AGENT_OPEN); | 
|  | packet_put_int(nc->self); | 
|  | } | 
|  | packet_send(); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* ARGSUSED */ | 
|  | static void | 
|  | channel_post_connecting(Channel *c, fd_set *readset, fd_set *writeset) | 
|  | { | 
|  | int err = 0, sock; | 
|  | socklen_t sz = sizeof(err); | 
|  |  | 
|  | if (FD_ISSET(c->sock, writeset)) { | 
|  | if (getsockopt(c->sock, SOL_SOCKET, SO_ERROR, &err, &sz) < 0) { | 
|  | err = errno; | 
|  | error("getsockopt SO_ERROR failed"); | 
|  | } | 
|  | if (err == 0) { | 
|  | debug("channel %d: connected to %s port %d", | 
|  | c->self, c->connect_ctx.host, c->connect_ctx.port); | 
|  | channel_connect_ctx_free(&c->connect_ctx); | 
|  | c->type = SSH_CHANNEL_OPEN; | 
|  | if (compat20) { | 
|  | packet_start(SSH2_MSG_CHANNEL_OPEN_CONFIRMATION); | 
|  | packet_put_int(c->remote_id); | 
|  | packet_put_int(c->self); | 
|  | packet_put_int(c->local_window); | 
|  | packet_put_int(c->local_maxpacket); | 
|  | } else { | 
|  | packet_start(SSH_MSG_CHANNEL_OPEN_CONFIRMATION); | 
|  | packet_put_int(c->remote_id); | 
|  | packet_put_int(c->self); | 
|  | } | 
|  | } else { | 
|  | debug("channel %d: connection failed: %s", | 
|  | c->self, strerror(err)); | 
|  | /* Try next address, if any */ | 
|  | if ((sock = connect_next(&c->connect_ctx)) > 0) { | 
|  | close(c->sock); | 
|  | c->sock = c->rfd = c->wfd = sock; | 
|  | channel_max_fd = channel_find_maxfd(); | 
|  | return; | 
|  | } | 
|  | /* Exhausted all addresses */ | 
|  | error("connect_to %.100s port %d: failed.", | 
|  | c->connect_ctx.host, c->connect_ctx.port); | 
|  | channel_connect_ctx_free(&c->connect_ctx); | 
|  | if (compat20) { | 
|  | packet_start(SSH2_MSG_CHANNEL_OPEN_FAILURE); | 
|  | packet_put_int(c->remote_id); | 
|  | packet_put_int(SSH2_OPEN_CONNECT_FAILED); | 
|  | if (!(datafellows & SSH_BUG_OPENFAILURE)) { | 
|  | packet_put_cstring(strerror(err)); | 
|  | packet_put_cstring(""); | 
|  | } | 
|  | } else { | 
|  | packet_start(SSH_MSG_CHANNEL_OPEN_FAILURE); | 
|  | packet_put_int(c->remote_id); | 
|  | } | 
|  | chan_mark_dead(c); | 
|  | } | 
|  | packet_send(); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* ARGSUSED */ | 
|  | static int | 
|  | channel_handle_rfd(Channel *c, fd_set *readset, fd_set *writeset) | 
|  | { | 
|  | char buf[CHAN_RBUF]; | 
|  | int len, force; | 
|  |  | 
|  | force = c->isatty && c->detach_close && c->istate != CHAN_INPUT_CLOSED; | 
|  | if (c->rfd != -1 && (force || FD_ISSET(c->rfd, readset))) { | 
|  | errno = 0; | 
|  | len = read(c->rfd, buf, sizeof(buf)); | 
|  | if (len < 0 && (errno == EINTR || | 
|  | ((errno == EAGAIN || errno == EWOULDBLOCK) && !force))) | 
|  | return 1; | 
|  | #ifndef PTY_ZEROREAD | 
|  | if (len <= 0) { | 
|  | #else | 
|  | if ((!c->isatty && len <= 0) || | 
|  | (c->isatty && (len < 0 || (len == 0 && errno != 0)))) { | 
|  | #endif | 
|  | debug2("channel %d: read<=0 rfd %d len %d", | 
|  | c->self, c->rfd, len); | 
|  | if (c->type != SSH_CHANNEL_OPEN) { | 
|  | debug2("channel %d: not open", c->self); | 
|  | chan_mark_dead(c); | 
|  | return -1; | 
|  | } else if (compat13) { | 
|  | buffer_clear(&c->output); | 
|  | c->type = SSH_CHANNEL_INPUT_DRAINING; | 
|  | debug2("channel %d: input draining.", c->self); | 
|  | } else { | 
|  | chan_read_failed(c); | 
|  | } | 
|  | return -1; | 
|  | } | 
|  | if (c->input_filter != NULL) { | 
|  | if (c->input_filter(c, buf, len) == -1) { | 
|  | debug2("channel %d: filter stops", c->self); | 
|  | chan_read_failed(c); | 
|  | } | 
|  | } else if (c->datagram) { | 
|  | buffer_put_string(&c->input, buf, len); | 
|  | } else { | 
|  | buffer_append(&c->input, buf, len); | 
|  | } | 
|  | } | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* ARGSUSED */ | 
|  | static int | 
|  | channel_handle_wfd(Channel *c, fd_set *readset, fd_set *writeset) | 
|  | { | 
|  | struct termios tio; | 
|  | u_char *data = NULL, *buf; | 
|  | u_int dlen, olen = 0; | 
|  | int len; | 
|  |  | 
|  | /* Send buffered output data to the socket. */ | 
|  | if (c->wfd != -1 && | 
|  | FD_ISSET(c->wfd, writeset) && | 
|  | buffer_len(&c->output) > 0) { | 
|  | olen = buffer_len(&c->output); | 
|  | if (c->output_filter != NULL) { | 
|  | if ((buf = c->output_filter(c, &data, &dlen)) == NULL) { | 
|  | debug2("channel %d: filter stops", c->self); | 
|  | if (c->type != SSH_CHANNEL_OPEN) | 
|  | chan_mark_dead(c); | 
|  | else | 
|  | chan_write_failed(c); | 
|  | return -1; | 
|  | } | 
|  | } else if (c->datagram) { | 
|  | buf = data = buffer_get_string(&c->output, &dlen); | 
|  | } else { | 
|  | buf = data = buffer_ptr(&c->output); | 
|  | dlen = buffer_len(&c->output); | 
|  | } | 
|  |  | 
|  | if (c->datagram) { | 
|  | /* ignore truncated writes, datagrams might get lost */ | 
|  | len = write(c->wfd, buf, dlen); | 
|  | free(data); | 
|  | if (len < 0 && (errno == EINTR || errno == EAGAIN || | 
|  | errno == EWOULDBLOCK)) | 
|  | return 1; | 
|  | if (len <= 0) { | 
|  | if (c->type != SSH_CHANNEL_OPEN) | 
|  | chan_mark_dead(c); | 
|  | else | 
|  | chan_write_failed(c); | 
|  | return -1; | 
|  | } | 
|  | goto out; | 
|  | } | 
|  | #ifdef _AIX | 
|  | /* XXX: Later AIX versions can't push as much data to tty */ | 
|  | if (compat20 && c->wfd_isatty) | 
|  | dlen = MIN(dlen, 8*1024); | 
|  | #endif | 
|  |  | 
|  | len = write(c->wfd, buf, dlen); | 
|  | if (len < 0 && | 
|  | (errno == EINTR || errno == EAGAIN || errno == EWOULDBLOCK)) | 
|  | return 1; | 
|  | if (len <= 0) { | 
|  | if (c->type != SSH_CHANNEL_OPEN) { | 
|  | debug2("channel %d: not open", c->self); | 
|  | chan_mark_dead(c); | 
|  | return -1; | 
|  | } else if (compat13) { | 
|  | buffer_clear(&c->output); | 
|  | debug2("channel %d: input draining.", c->self); | 
|  | c->type = SSH_CHANNEL_INPUT_DRAINING; | 
|  | } else { | 
|  | chan_write_failed(c); | 
|  | } | 
|  | return -1; | 
|  | } | 
|  | #ifndef BROKEN_TCGETATTR_ICANON | 
|  | if (compat20 && c->isatty && dlen >= 1 && buf[0] != '\r') { | 
|  | if (tcgetattr(c->wfd, &tio) == 0 && | 
|  | !(tio.c_lflag & ECHO) && (tio.c_lflag & ICANON)) { | 
|  | /* | 
|  | * Simulate echo to reduce the impact of | 
|  | * traffic analysis. We need to match the | 
|  | * size of a SSH2_MSG_CHANNEL_DATA message | 
|  | * (4 byte channel id + buf) | 
|  | */ | 
|  | packet_send_ignore(4 + len); | 
|  | packet_send(); | 
|  | } | 
|  | } | 
|  | #endif | 
|  | buffer_consume(&c->output, len); | 
|  | } | 
|  | out: | 
|  | if (compat20 && olen > 0) | 
|  | c->local_consumed += olen - buffer_len(&c->output); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static int | 
|  | channel_handle_efd(Channel *c, fd_set *readset, fd_set *writeset) | 
|  | { | 
|  | char buf[CHAN_RBUF]; | 
|  | int len; | 
|  |  | 
|  | /** XXX handle drain efd, too */ | 
|  | if (c->efd != -1) { | 
|  | if (c->extended_usage == CHAN_EXTENDED_WRITE && | 
|  | FD_ISSET(c->efd, writeset) && | 
|  | buffer_len(&c->extended) > 0) { | 
|  | len = write(c->efd, buffer_ptr(&c->extended), | 
|  | buffer_len(&c->extended)); | 
|  | debug2("channel %d: written %d to efd %d", | 
|  | c->self, len, c->efd); | 
|  | if (len < 0 && (errno == EINTR || errno == EAGAIN || | 
|  | errno == EWOULDBLOCK)) | 
|  | return 1; | 
|  | if (len <= 0) { | 
|  | debug2("channel %d: closing write-efd %d", | 
|  | c->self, c->efd); | 
|  | channel_close_fd(&c->efd); | 
|  | } else { | 
|  | buffer_consume(&c->extended, len); | 
|  | c->local_consumed += len; | 
|  | } | 
|  | } else if (c->efd != -1 && | 
|  | (c->extended_usage == CHAN_EXTENDED_READ || | 
|  | c->extended_usage == CHAN_EXTENDED_IGNORE) && | 
|  | (c->detach_close || FD_ISSET(c->efd, readset))) { | 
|  | len = read(c->efd, buf, sizeof(buf)); | 
|  | debug2("channel %d: read %d from efd %d", | 
|  | c->self, len, c->efd); | 
|  | if (len < 0 && (errno == EINTR || ((errno == EAGAIN || | 
|  | errno == EWOULDBLOCK) && !c->detach_close))) | 
|  | return 1; | 
|  | if (len <= 0) { | 
|  | debug2("channel %d: closing read-efd %d", | 
|  | c->self, c->efd); | 
|  | channel_close_fd(&c->efd); | 
|  | } else { | 
|  | if (c->extended_usage == CHAN_EXTENDED_IGNORE) { | 
|  | debug3("channel %d: discard efd", | 
|  | c->self); | 
|  | } else | 
|  | buffer_append(&c->extended, buf, len); | 
|  | } | 
|  | } | 
|  | } | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static int | 
|  | channel_check_window(Channel *c) | 
|  | { | 
|  | if (c->type == SSH_CHANNEL_OPEN && | 
|  | !(c->flags & (CHAN_CLOSE_SENT|CHAN_CLOSE_RCVD)) && | 
|  | ((c->local_window_max - c->local_window > | 
|  | c->local_maxpacket*3) || | 
|  | c->local_window < c->local_window_max/2) && | 
|  | c->local_consumed > 0) { | 
|  | packet_start(SSH2_MSG_CHANNEL_WINDOW_ADJUST); | 
|  | packet_put_int(c->remote_id); | 
|  | packet_put_int(c->local_consumed); | 
|  | packet_send(); | 
|  | debug2("channel %d: window %d sent adjust %d", | 
|  | c->self, c->local_window, | 
|  | c->local_consumed); | 
|  | c->local_window += c->local_consumed; | 
|  | c->local_consumed = 0; | 
|  | } | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static void | 
|  | channel_post_open(Channel *c, fd_set *readset, fd_set *writeset) | 
|  | { | 
|  | channel_handle_rfd(c, readset, writeset); | 
|  | channel_handle_wfd(c, readset, writeset); | 
|  | if (!compat20) | 
|  | return; | 
|  | channel_handle_efd(c, readset, writeset); | 
|  | channel_check_window(c); | 
|  | } | 
|  |  | 
|  | static u_int | 
|  | read_mux(Channel *c, u_int need) | 
|  | { | 
|  | char buf[CHAN_RBUF]; | 
|  | int len; | 
|  | u_int rlen; | 
|  |  | 
|  | if (buffer_len(&c->input) < need) { | 
|  | rlen = need - buffer_len(&c->input); | 
|  | len = read(c->rfd, buf, MIN(rlen, CHAN_RBUF)); | 
|  | if (len <= 0) { | 
|  | if (errno != EINTR && errno != EAGAIN) { | 
|  | debug2("channel %d: ctl read<=0 rfd %d len %d", | 
|  | c->self, c->rfd, len); | 
|  | chan_read_failed(c); | 
|  | return 0; | 
|  | } | 
|  | } else | 
|  | buffer_append(&c->input, buf, len); | 
|  | } | 
|  | return buffer_len(&c->input); | 
|  | } | 
|  |  | 
|  | static void | 
|  | channel_post_mux_client(Channel *c, fd_set *readset, fd_set *writeset) | 
|  | { | 
|  | u_int need; | 
|  | ssize_t len; | 
|  |  | 
|  | if (!compat20) | 
|  | fatal("%s: entered with !compat20", __func__); | 
|  |  | 
|  | if (c->rfd != -1 && !c->mux_pause && FD_ISSET(c->rfd, readset) && | 
|  | (c->istate == CHAN_INPUT_OPEN || | 
|  | c->istate == CHAN_INPUT_WAIT_DRAIN)) { | 
|  | /* | 
|  | * Don't not read past the precise end of packets to | 
|  | * avoid disrupting fd passing. | 
|  | */ | 
|  | if (read_mux(c, 4) < 4) /* read header */ | 
|  | return; | 
|  | need = get_u32(buffer_ptr(&c->input)); | 
|  | #define CHANNEL_MUX_MAX_PACKET	(256 * 1024) | 
|  | if (need > CHANNEL_MUX_MAX_PACKET) { | 
|  | debug2("channel %d: packet too big %u > %u", | 
|  | c->self, CHANNEL_MUX_MAX_PACKET, need); | 
|  | chan_rcvd_oclose(c); | 
|  | return; | 
|  | } | 
|  | if (read_mux(c, need + 4) < need + 4) /* read body */ | 
|  | return; | 
|  | if (c->mux_rcb(c) != 0) { | 
|  | debug("channel %d: mux_rcb failed", c->self); | 
|  | chan_mark_dead(c); | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (c->wfd != -1 && FD_ISSET(c->wfd, writeset) && | 
|  | buffer_len(&c->output) > 0) { | 
|  | len = write(c->wfd, buffer_ptr(&c->output), | 
|  | buffer_len(&c->output)); | 
|  | if (len < 0 && (errno == EINTR || errno == EAGAIN)) | 
|  | return; | 
|  | if (len <= 0) { | 
|  | chan_mark_dead(c); | 
|  | return; | 
|  | } | 
|  | buffer_consume(&c->output, len); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void | 
|  | channel_post_mux_listener(Channel *c, fd_set *readset, fd_set *writeset) | 
|  | { | 
|  | Channel *nc; | 
|  | struct sockaddr_storage addr; | 
|  | socklen_t addrlen; | 
|  | int newsock; | 
|  | uid_t euid; | 
|  | gid_t egid; | 
|  |  | 
|  | if (!FD_ISSET(c->sock, readset)) | 
|  | return; | 
|  |  | 
|  | debug("multiplexing control connection"); | 
|  |  | 
|  | /* | 
|  | * Accept connection on control socket | 
|  | */ | 
|  | memset(&addr, 0, sizeof(addr)); | 
|  | addrlen = sizeof(addr); | 
|  | if ((newsock = accept(c->sock, (struct sockaddr*)&addr, | 
|  | &addrlen)) == -1) { | 
|  | error("%s accept: %s", __func__, strerror(errno)); | 
|  | if (errno == EMFILE || errno == ENFILE) | 
|  | c->notbefore = monotime() + 1; | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (getpeereid(newsock, &euid, &egid) < 0) { | 
|  | error("%s getpeereid failed: %s", __func__, | 
|  | strerror(errno)); | 
|  | close(newsock); | 
|  | return; | 
|  | } | 
|  | if ((euid != 0) && (getuid() != euid)) { | 
|  | error("multiplex uid mismatch: peer euid %u != uid %u", | 
|  | (u_int)euid, (u_int)getuid()); | 
|  | close(newsock); | 
|  | return; | 
|  | } | 
|  | nc = channel_new("multiplex client", SSH_CHANNEL_MUX_CLIENT, | 
|  | newsock, newsock, -1, c->local_window_max, | 
|  | c->local_maxpacket, 0, "mux-control", 1); | 
|  | nc->mux_rcb = c->mux_rcb; | 
|  | debug3("%s: new mux channel %d fd %d", __func__, | 
|  | nc->self, nc->sock); | 
|  | /* establish state */ | 
|  | nc->mux_rcb(nc); | 
|  | /* mux state transitions must not elicit protocol messages */ | 
|  | nc->flags |= CHAN_LOCAL; | 
|  | } | 
|  |  | 
|  | /* ARGSUSED */ | 
|  | static void | 
|  | channel_post_output_drain_13(Channel *c, fd_set *readset, fd_set *writeset) | 
|  | { | 
|  | int len; | 
|  |  | 
|  | /* Send buffered output data to the socket. */ | 
|  | if (FD_ISSET(c->sock, writeset) && buffer_len(&c->output) > 0) { | 
|  | len = write(c->sock, buffer_ptr(&c->output), | 
|  | buffer_len(&c->output)); | 
|  | if (len <= 0) | 
|  | buffer_clear(&c->output); | 
|  | else | 
|  | buffer_consume(&c->output, len); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void | 
|  | channel_handler_init_20(void) | 
|  | { | 
|  | channel_pre[SSH_CHANNEL_OPEN] =			&channel_pre_open; | 
|  | channel_pre[SSH_CHANNEL_X11_OPEN] =		&channel_pre_x11_open; | 
|  | channel_pre[SSH_CHANNEL_PORT_LISTENER] =	&channel_pre_listener; | 
|  | channel_pre[SSH_CHANNEL_RPORT_LISTENER] =	&channel_pre_listener; | 
|  | channel_pre[SSH_CHANNEL_X11_LISTENER] =		&channel_pre_listener; | 
|  | channel_pre[SSH_CHANNEL_AUTH_SOCKET] =		&channel_pre_listener; | 
|  | channel_pre[SSH_CHANNEL_CONNECTING] =		&channel_pre_connecting; | 
|  | channel_pre[SSH_CHANNEL_DYNAMIC] =		&channel_pre_dynamic; | 
|  | channel_pre[SSH_CHANNEL_MUX_LISTENER] =		&channel_pre_listener; | 
|  | channel_pre[SSH_CHANNEL_MUX_CLIENT] =		&channel_pre_mux_client; | 
|  |  | 
|  | channel_post[SSH_CHANNEL_OPEN] =		&channel_post_open; | 
|  | channel_post[SSH_CHANNEL_PORT_LISTENER] =	&channel_post_port_listener; | 
|  | channel_post[SSH_CHANNEL_RPORT_LISTENER] =	&channel_post_port_listener; | 
|  | channel_post[SSH_CHANNEL_X11_LISTENER] =	&channel_post_x11_listener; | 
|  | channel_post[SSH_CHANNEL_AUTH_SOCKET] =		&channel_post_auth_listener; | 
|  | channel_post[SSH_CHANNEL_CONNECTING] =		&channel_post_connecting; | 
|  | channel_post[SSH_CHANNEL_DYNAMIC] =		&channel_post_open; | 
|  | channel_post[SSH_CHANNEL_MUX_LISTENER] =	&channel_post_mux_listener; | 
|  | channel_post[SSH_CHANNEL_MUX_CLIENT] =		&channel_post_mux_client; | 
|  | } | 
|  |  | 
|  | static void | 
|  | channel_handler_init_13(void) | 
|  | { | 
|  | channel_pre[SSH_CHANNEL_OPEN] =			&channel_pre_open_13; | 
|  | channel_pre[SSH_CHANNEL_X11_OPEN] =		&channel_pre_x11_open_13; | 
|  | channel_pre[SSH_CHANNEL_X11_LISTENER] =		&channel_pre_listener; | 
|  | channel_pre[SSH_CHANNEL_PORT_LISTENER] =	&channel_pre_listener; | 
|  | channel_pre[SSH_CHANNEL_AUTH_SOCKET] =		&channel_pre_listener; | 
|  | channel_pre[SSH_CHANNEL_INPUT_DRAINING] =	&channel_pre_input_draining; | 
|  | channel_pre[SSH_CHANNEL_OUTPUT_DRAINING] =	&channel_pre_output_draining; | 
|  | channel_pre[SSH_CHANNEL_CONNECTING] =		&channel_pre_connecting; | 
|  | channel_pre[SSH_CHANNEL_DYNAMIC] =		&channel_pre_dynamic; | 
|  |  | 
|  | channel_post[SSH_CHANNEL_OPEN] =		&channel_post_open; | 
|  | channel_post[SSH_CHANNEL_X11_LISTENER] =	&channel_post_x11_listener; | 
|  | channel_post[SSH_CHANNEL_PORT_LISTENER] =	&channel_post_port_listener; | 
|  | channel_post[SSH_CHANNEL_AUTH_SOCKET] =		&channel_post_auth_listener; | 
|  | channel_post[SSH_CHANNEL_OUTPUT_DRAINING] =	&channel_post_output_drain_13; | 
|  | channel_post[SSH_CHANNEL_CONNECTING] =		&channel_post_connecting; | 
|  | channel_post[SSH_CHANNEL_DYNAMIC] =		&channel_post_open; | 
|  | } | 
|  |  | 
|  | static void | 
|  | channel_handler_init_15(void) | 
|  | { | 
|  | channel_pre[SSH_CHANNEL_OPEN] =			&channel_pre_open; | 
|  | channel_pre[SSH_CHANNEL_X11_OPEN] =		&channel_pre_x11_open; | 
|  | channel_pre[SSH_CHANNEL_X11_LISTENER] =		&channel_pre_listener; | 
|  | channel_pre[SSH_CHANNEL_PORT_LISTENER] =	&channel_pre_listener; | 
|  | channel_pre[SSH_CHANNEL_AUTH_SOCKET] =		&channel_pre_listener; | 
|  | channel_pre[SSH_CHANNEL_CONNECTING] =		&channel_pre_connecting; | 
|  | channel_pre[SSH_CHANNEL_DYNAMIC] =		&channel_pre_dynamic; | 
|  |  | 
|  | channel_post[SSH_CHANNEL_X11_LISTENER] =	&channel_post_x11_listener; | 
|  | channel_post[SSH_CHANNEL_PORT_LISTENER] =	&channel_post_port_listener; | 
|  | channel_post[SSH_CHANNEL_AUTH_SOCKET] =		&channel_post_auth_listener; | 
|  | channel_post[SSH_CHANNEL_OPEN] =		&channel_post_open; | 
|  | channel_post[SSH_CHANNEL_CONNECTING] =		&channel_post_connecting; | 
|  | channel_post[SSH_CHANNEL_DYNAMIC] =		&channel_post_open; | 
|  | } | 
|  |  | 
|  | static void | 
|  | channel_handler_init(void) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < SSH_CHANNEL_MAX_TYPE; i++) { | 
|  | channel_pre[i] = NULL; | 
|  | channel_post[i] = NULL; | 
|  | } | 
|  | if (compat20) | 
|  | channel_handler_init_20(); | 
|  | else if (compat13) | 
|  | channel_handler_init_13(); | 
|  | else | 
|  | channel_handler_init_15(); | 
|  | } | 
|  |  | 
|  | /* gc dead channels */ | 
|  | static void | 
|  | channel_garbage_collect(Channel *c) | 
|  | { | 
|  | if (c == NULL) | 
|  | return; | 
|  | if (c->detach_user != NULL) { | 
|  | if (!chan_is_dead(c, c->detach_close)) | 
|  | return; | 
|  | debug2("channel %d: gc: notify user", c->self); | 
|  | c->detach_user(c->self, NULL); | 
|  | /* if we still have a callback */ | 
|  | if (c->detach_user != NULL) | 
|  | return; | 
|  | debug2("channel %d: gc: user detached", c->self); | 
|  | } | 
|  | if (!chan_is_dead(c, 1)) | 
|  | return; | 
|  | debug2("channel %d: garbage collecting", c->self); | 
|  | channel_free(c); | 
|  | } | 
|  |  | 
|  | static void | 
|  | channel_handler(chan_fn *ftab[], fd_set *readset, fd_set *writeset, | 
|  | time_t *unpause_secs) | 
|  | { | 
|  | static int did_init = 0; | 
|  | u_int i, oalloc; | 
|  | Channel *c; | 
|  | time_t now; | 
|  |  | 
|  | if (!did_init) { | 
|  | channel_handler_init(); | 
|  | did_init = 1; | 
|  | } | 
|  | now = monotime(); | 
|  | if (unpause_secs != NULL) | 
|  | *unpause_secs = 0; | 
|  | for (i = 0, oalloc = channels_alloc; i < oalloc; i++) { | 
|  | c = channels[i]; | 
|  | if (c == NULL) | 
|  | continue; | 
|  | if (c->delayed) { | 
|  | if (ftab == channel_pre) | 
|  | c->delayed = 0; | 
|  | else | 
|  | continue; | 
|  | } | 
|  | if (ftab[c->type] != NULL) { | 
|  | /* | 
|  | * Run handlers that are not paused. | 
|  | */ | 
|  | if (c->notbefore <= now) | 
|  | (*ftab[c->type])(c, readset, writeset); | 
|  | else if (unpause_secs != NULL) { | 
|  | /* | 
|  | * Collect the time that the earliest | 
|  | * channel comes off pause. | 
|  | */ | 
|  | debug3("%s: chan %d: skip for %d more seconds", | 
|  | __func__, c->self, | 
|  | (int)(c->notbefore - now)); | 
|  | if (*unpause_secs == 0 || | 
|  | (c->notbefore - now) < *unpause_secs) | 
|  | *unpause_secs = c->notbefore - now; | 
|  | } | 
|  | } | 
|  | channel_garbage_collect(c); | 
|  | } | 
|  | if (unpause_secs != NULL && *unpause_secs != 0) | 
|  | debug3("%s: first channel unpauses in %d seconds", | 
|  | __func__, (int)*unpause_secs); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Allocate/update select bitmasks and add any bits relevant to channels in | 
|  | * select bitmasks. | 
|  | */ | 
|  | void | 
|  | channel_prepare_select(fd_set **readsetp, fd_set **writesetp, int *maxfdp, | 
|  | u_int *nallocp, time_t *minwait_secs, int rekeying) | 
|  | { | 
|  | u_int n, sz, nfdset; | 
|  |  | 
|  | n = MAX(*maxfdp, channel_max_fd); | 
|  |  | 
|  | nfdset = howmany(n+1, NFDBITS); | 
|  | /* Explicitly test here, because xrealloc isn't always called */ | 
|  | if (nfdset && SIZE_T_MAX / nfdset < sizeof(fd_mask)) | 
|  | fatal("channel_prepare_select: max_fd (%d) is too large", n); | 
|  | sz = nfdset * sizeof(fd_mask); | 
|  |  | 
|  | /* perhaps check sz < nalloc/2 and shrink? */ | 
|  | if (*readsetp == NULL || sz > *nallocp) { | 
|  | *readsetp = xrealloc(*readsetp, nfdset, sizeof(fd_mask)); | 
|  | *writesetp = xrealloc(*writesetp, nfdset, sizeof(fd_mask)); | 
|  | *nallocp = sz; | 
|  | } | 
|  | *maxfdp = n; | 
|  | memset(*readsetp, 0, sz); | 
|  | memset(*writesetp, 0, sz); | 
|  |  | 
|  | if (!rekeying) | 
|  | channel_handler(channel_pre, *readsetp, *writesetp, | 
|  | minwait_secs); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * After select, perform any appropriate operations for channels which have | 
|  | * events pending. | 
|  | */ | 
|  | void | 
|  | channel_after_select(fd_set *readset, fd_set *writeset) | 
|  | { | 
|  | channel_handler(channel_post, readset, writeset, NULL); | 
|  | } | 
|  |  | 
|  |  | 
|  | /* If there is data to send to the connection, enqueue some of it now. */ | 
|  | void | 
|  | channel_output_poll(void) | 
|  | { | 
|  | Channel *c; | 
|  | u_int i, len; | 
|  |  | 
|  | for (i = 0; i < channels_alloc; i++) { | 
|  | c = channels[i]; | 
|  | if (c == NULL) | 
|  | continue; | 
|  |  | 
|  | /* | 
|  | * We are only interested in channels that can have buffered | 
|  | * incoming data. | 
|  | */ | 
|  | if (compat13) { | 
|  | if (c->type != SSH_CHANNEL_OPEN && | 
|  | c->type != SSH_CHANNEL_INPUT_DRAINING) | 
|  | continue; | 
|  | } else { | 
|  | if (c->type != SSH_CHANNEL_OPEN) | 
|  | continue; | 
|  | } | 
|  | if (compat20 && | 
|  | (c->flags & (CHAN_CLOSE_SENT|CHAN_CLOSE_RCVD))) { | 
|  | /* XXX is this true? */ | 
|  | debug3("channel %d: will not send data after close", c->self); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* Get the amount of buffered data for this channel. */ | 
|  | if ((c->istate == CHAN_INPUT_OPEN || | 
|  | c->istate == CHAN_INPUT_WAIT_DRAIN) && | 
|  | (len = buffer_len(&c->input)) > 0) { | 
|  | if (c->datagram) { | 
|  | if (len > 0) { | 
|  | u_char *data; | 
|  | u_int dlen; | 
|  |  | 
|  | data = buffer_get_string(&c->input, | 
|  | &dlen); | 
|  | if (dlen > c->remote_window || | 
|  | dlen > c->remote_maxpacket) { | 
|  | debug("channel %d: datagram " | 
|  | "too big for channel", | 
|  | c->self); | 
|  | free(data); | 
|  | continue; | 
|  | } | 
|  | packet_start(SSH2_MSG_CHANNEL_DATA); | 
|  | packet_put_int(c->remote_id); | 
|  | packet_put_string(data, dlen); | 
|  | packet_send(); | 
|  | c->remote_window -= dlen + 4; | 
|  | free(data); | 
|  | } | 
|  | continue; | 
|  | } | 
|  | /* | 
|  | * Send some data for the other side over the secure | 
|  | * connection. | 
|  | */ | 
|  | if (compat20) { | 
|  | if (len > c->remote_window) | 
|  | len = c->remote_window; | 
|  | if (len > c->remote_maxpacket) | 
|  | len = c->remote_maxpacket; | 
|  | } else { | 
|  | if (packet_is_interactive()) { | 
|  | if (len > 1024) | 
|  | len = 512; | 
|  | } else { | 
|  | /* Keep the packets at reasonable size. */ | 
|  | if (len > packet_get_maxsize()/2) | 
|  | len = packet_get_maxsize()/2; | 
|  | } | 
|  | } | 
|  | if (len > 0) { | 
|  | packet_start(compat20 ? | 
|  | SSH2_MSG_CHANNEL_DATA : SSH_MSG_CHANNEL_DATA); | 
|  | packet_put_int(c->remote_id); | 
|  | packet_put_string(buffer_ptr(&c->input), len); | 
|  | packet_send(); | 
|  | buffer_consume(&c->input, len); | 
|  | c->remote_window -= len; | 
|  | } | 
|  | } else if (c->istate == CHAN_INPUT_WAIT_DRAIN) { | 
|  | if (compat13) | 
|  | fatal("cannot happen: istate == INPUT_WAIT_DRAIN for proto 1.3"); | 
|  | /* | 
|  | * input-buffer is empty and read-socket shutdown: | 
|  | * tell peer, that we will not send more data: send IEOF. | 
|  | * hack for extended data: delay EOF if EFD still in use. | 
|  | */ | 
|  | if (CHANNEL_EFD_INPUT_ACTIVE(c)) | 
|  | debug2("channel %d: ibuf_empty delayed efd %d/(%d)", | 
|  | c->self, c->efd, buffer_len(&c->extended)); | 
|  | else | 
|  | chan_ibuf_empty(c); | 
|  | } | 
|  | /* Send extended data, i.e. stderr */ | 
|  | if (compat20 && | 
|  | !(c->flags & CHAN_EOF_SENT) && | 
|  | c->remote_window > 0 && | 
|  | (len = buffer_len(&c->extended)) > 0 && | 
|  | c->extended_usage == CHAN_EXTENDED_READ) { | 
|  | debug2("channel %d: rwin %u elen %u euse %d", | 
|  | c->self, c->remote_window, buffer_len(&c->extended), | 
|  | c->extended_usage); | 
|  | if (len > c->remote_window) | 
|  | len = c->remote_window; | 
|  | if (len > c->remote_maxpacket) | 
|  | len = c->remote_maxpacket; | 
|  | packet_start(SSH2_MSG_CHANNEL_EXTENDED_DATA); | 
|  | packet_put_int(c->remote_id); | 
|  | packet_put_int(SSH2_EXTENDED_DATA_STDERR); | 
|  | packet_put_string(buffer_ptr(&c->extended), len); | 
|  | packet_send(); | 
|  | buffer_consume(&c->extended, len); | 
|  | c->remote_window -= len; | 
|  | debug2("channel %d: sent ext data %d", c->self, len); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | /* -- protocol input */ | 
|  |  | 
|  | /* ARGSUSED */ | 
|  | void | 
|  | channel_input_data(int type, u_int32_t seq, void *ctxt) | 
|  | { | 
|  | int id; | 
|  | const u_char *data; | 
|  | u_int data_len, win_len; | 
|  | Channel *c; | 
|  |  | 
|  | /* Get the channel number and verify it. */ | 
|  | id = packet_get_int(); | 
|  | c = channel_lookup(id); | 
|  | if (c == NULL) | 
|  | packet_disconnect("Received data for nonexistent channel %d.", id); | 
|  |  | 
|  | /* Ignore any data for non-open channels (might happen on close) */ | 
|  | if (c->type != SSH_CHANNEL_OPEN && | 
|  | c->type != SSH_CHANNEL_X11_OPEN) | 
|  | return; | 
|  |  | 
|  | /* Get the data. */ | 
|  | data = packet_get_string_ptr(&data_len); | 
|  | win_len = data_len; | 
|  | if (c->datagram) | 
|  | win_len += 4;  /* string length header */ | 
|  |  | 
|  | /* | 
|  | * Ignore data for protocol > 1.3 if output end is no longer open. | 
|  | * For protocol 2 the sending side is reducing its window as it sends | 
|  | * data, so we must 'fake' consumption of the data in order to ensure | 
|  | * that window updates are sent back.  Otherwise the connection might | 
|  | * deadlock. | 
|  | */ | 
|  | if (!compat13 && c->ostate != CHAN_OUTPUT_OPEN) { | 
|  | if (compat20) { | 
|  | c->local_window -= win_len; | 
|  | c->local_consumed += win_len; | 
|  | } | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (compat20) { | 
|  | if (win_len > c->local_maxpacket) { | 
|  | logit("channel %d: rcvd big packet %d, maxpack %d", | 
|  | c->self, win_len, c->local_maxpacket); | 
|  | } | 
|  | if (win_len > c->local_window) { | 
|  | logit("channel %d: rcvd too much data %d, win %d", | 
|  | c->self, win_len, c->local_window); | 
|  | return; | 
|  | } | 
|  | c->local_window -= win_len; | 
|  | } | 
|  | if (c->datagram) | 
|  | buffer_put_string(&c->output, data, data_len); | 
|  | else | 
|  | buffer_append(&c->output, data, data_len); | 
|  | packet_check_eom(); | 
|  | } | 
|  |  | 
|  | /* ARGSUSED */ | 
|  | void | 
|  | channel_input_extended_data(int type, u_int32_t seq, void *ctxt) | 
|  | { | 
|  | int id; | 
|  | char *data; | 
|  | u_int data_len, tcode; | 
|  | Channel *c; | 
|  |  | 
|  | /* Get the channel number and verify it. */ | 
|  | id = packet_get_int(); | 
|  | c = channel_lookup(id); | 
|  |  | 
|  | if (c == NULL) | 
|  | packet_disconnect("Received extended_data for bad channel %d.", id); | 
|  | if (c->type != SSH_CHANNEL_OPEN) { | 
|  | logit("channel %d: ext data for non open", id); | 
|  | return; | 
|  | } | 
|  | if (c->flags & CHAN_EOF_RCVD) { | 
|  | if (datafellows & SSH_BUG_EXTEOF) | 
|  | debug("channel %d: accepting ext data after eof", id); | 
|  | else | 
|  | packet_disconnect("Received extended_data after EOF " | 
|  | "on channel %d.", id); | 
|  | } | 
|  | tcode = packet_get_int(); | 
|  | if (c->efd == -1 || | 
|  | c->extended_usage != CHAN_EXTENDED_WRITE || | 
|  | tcode != SSH2_EXTENDED_DATA_STDERR) { | 
|  | logit("channel %d: bad ext data", c->self); | 
|  | return; | 
|  | } | 
|  | data = packet_get_string(&data_len); | 
|  | packet_check_eom(); | 
|  | if (data_len > c->local_window) { | 
|  | logit("channel %d: rcvd too much extended_data %d, win %d", | 
|  | c->self, data_len, c->local_window); | 
|  | free(data); | 
|  | return; | 
|  | } | 
|  | debug2("channel %d: rcvd ext data %d", c->self, data_len); | 
|  | c->local_window -= data_len; | 
|  | buffer_append(&c->extended, data, data_len); | 
|  | free(data); | 
|  | } | 
|  |  | 
|  | /* ARGSUSED */ | 
|  | void | 
|  | channel_input_ieof(int type, u_int32_t seq, void *ctxt) | 
|  | { | 
|  | int id; | 
|  | Channel *c; | 
|  |  | 
|  | id = packet_get_int(); | 
|  | packet_check_eom(); | 
|  | c = channel_lookup(id); | 
|  | if (c == NULL) | 
|  | packet_disconnect("Received ieof for nonexistent channel %d.", id); | 
|  | chan_rcvd_ieof(c); | 
|  |  | 
|  | /* XXX force input close */ | 
|  | if (c->force_drain && c->istate == CHAN_INPUT_OPEN) { | 
|  | debug("channel %d: FORCE input drain", c->self); | 
|  | c->istate = CHAN_INPUT_WAIT_DRAIN; | 
|  | if (buffer_len(&c->input) == 0) | 
|  | chan_ibuf_empty(c); | 
|  | } | 
|  |  | 
|  | } | 
|  |  | 
|  | /* ARGSUSED */ | 
|  | void | 
|  | channel_input_close(int type, u_int32_t seq, void *ctxt) | 
|  | { | 
|  | int id; | 
|  | Channel *c; | 
|  |  | 
|  | id = packet_get_int(); | 
|  | packet_check_eom(); | 
|  | c = channel_lookup(id); | 
|  | if (c == NULL) | 
|  | packet_disconnect("Received close for nonexistent channel %d.", id); | 
|  |  | 
|  | /* | 
|  | * Send a confirmation that we have closed the channel and no more | 
|  | * data is coming for it. | 
|  | */ | 
|  | packet_start(SSH_MSG_CHANNEL_CLOSE_CONFIRMATION); | 
|  | packet_put_int(c->remote_id); | 
|  | packet_send(); | 
|  |  | 
|  | /* | 
|  | * If the channel is in closed state, we have sent a close request, | 
|  | * and the other side will eventually respond with a confirmation. | 
|  | * Thus, we cannot free the channel here, because then there would be | 
|  | * no-one to receive the confirmation.  The channel gets freed when | 
|  | * the confirmation arrives. | 
|  | */ | 
|  | if (c->type != SSH_CHANNEL_CLOSED) { | 
|  | /* | 
|  | * Not a closed channel - mark it as draining, which will | 
|  | * cause it to be freed later. | 
|  | */ | 
|  | buffer_clear(&c->input); | 
|  | c->type = SSH_CHANNEL_OUTPUT_DRAINING; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* proto version 1.5 overloads CLOSE_CONFIRMATION with OCLOSE */ | 
|  | /* ARGSUSED */ | 
|  | void | 
|  | channel_input_oclose(int type, u_int32_t seq, void *ctxt) | 
|  | { | 
|  | int id = packet_get_int(); | 
|  | Channel *c = channel_lookup(id); | 
|  |  | 
|  | packet_check_eom(); | 
|  | if (c == NULL) | 
|  | packet_disconnect("Received oclose for nonexistent channel %d.", id); | 
|  | chan_rcvd_oclose(c); | 
|  | } | 
|  |  | 
|  | /* ARGSUSED */ | 
|  | void | 
|  | channel_input_close_confirmation(int type, u_int32_t seq, void *ctxt) | 
|  | { | 
|  | int id = packet_get_int(); | 
|  | Channel *c = channel_lookup(id); | 
|  |  | 
|  | packet_check_eom(); | 
|  | if (c == NULL) | 
|  | packet_disconnect("Received close confirmation for " | 
|  | "out-of-range channel %d.", id); | 
|  | if (c->type != SSH_CHANNEL_CLOSED && c->type != SSH_CHANNEL_ABANDONED) | 
|  | packet_disconnect("Received close confirmation for " | 
|  | "non-closed channel %d (type %d).", id, c->type); | 
|  | channel_free(c); | 
|  | } | 
|  |  | 
|  | /* ARGSUSED */ | 
|  | void | 
|  | channel_input_open_confirmation(int type, u_int32_t seq, void *ctxt) | 
|  | { | 
|  | int id, remote_id; | 
|  | Channel *c; | 
|  |  | 
|  | id = packet_get_int(); | 
|  | c = channel_lookup(id); | 
|  |  | 
|  | if (c==NULL || c->type != SSH_CHANNEL_OPENING) | 
|  | packet_disconnect("Received open confirmation for " | 
|  | "non-opening channel %d.", id); | 
|  | remote_id = packet_get_int(); | 
|  | /* Record the remote channel number and mark that the channel is now open. */ | 
|  | c->remote_id = remote_id; | 
|  | c->type = SSH_CHANNEL_OPEN; | 
|  |  | 
|  | if (compat20) { | 
|  | c->remote_window = packet_get_int(); | 
|  | c->remote_maxpacket = packet_get_int(); | 
|  | if (c->open_confirm) { | 
|  | debug2("callback start"); | 
|  | c->open_confirm(c->self, 1, c->open_confirm_ctx); | 
|  | debug2("callback done"); | 
|  | } | 
|  | debug2("channel %d: open confirm rwindow %u rmax %u", c->self, | 
|  | c->remote_window, c->remote_maxpacket); | 
|  | } | 
|  | packet_check_eom(); | 
|  | } | 
|  |  | 
|  | static char * | 
|  | reason2txt(int reason) | 
|  | { | 
|  | switch (reason) { | 
|  | case SSH2_OPEN_ADMINISTRATIVELY_PROHIBITED: | 
|  | return "administratively prohibited"; | 
|  | case SSH2_OPEN_CONNECT_FAILED: | 
|  | return "connect failed"; | 
|  | case SSH2_OPEN_UNKNOWN_CHANNEL_TYPE: | 
|  | return "unknown channel type"; | 
|  | case SSH2_OPEN_RESOURCE_SHORTAGE: | 
|  | return "resource shortage"; | 
|  | } | 
|  | return "unknown reason"; | 
|  | } | 
|  |  | 
|  | /* ARGSUSED */ | 
|  | void | 
|  | channel_input_open_failure(int type, u_int32_t seq, void *ctxt) | 
|  | { | 
|  | int id, reason; | 
|  | char *msg = NULL, *lang = NULL; | 
|  | Channel *c; | 
|  |  | 
|  | id = packet_get_int(); | 
|  | c = channel_lookup(id); | 
|  |  | 
|  | if (c==NULL || c->type != SSH_CHANNEL_OPENING) | 
|  | packet_disconnect("Received open failure for " | 
|  | "non-opening channel %d.", id); | 
|  | if (compat20) { | 
|  | reason = packet_get_int(); | 
|  | if (!(datafellows & SSH_BUG_OPENFAILURE)) { | 
|  | msg  = packet_get_string(NULL); | 
|  | lang = packet_get_string(NULL); | 
|  | } | 
|  | logit("channel %d: open failed: %s%s%s", id, | 
|  | reason2txt(reason), msg ? ": ": "", msg ? msg : ""); | 
|  | free(msg); | 
|  | free(lang); | 
|  | if (c->open_confirm) { | 
|  | debug2("callback start"); | 
|  | c->open_confirm(c->self, 0, c->open_confirm_ctx); | 
|  | debug2("callback done"); | 
|  | } | 
|  | } | 
|  | packet_check_eom(); | 
|  | /* Schedule the channel for cleanup/deletion. */ | 
|  | chan_mark_dead(c); | 
|  | } | 
|  |  | 
|  | /* ARGSUSED */ | 
|  | void | 
|  | channel_input_window_adjust(int type, u_int32_t seq, void *ctxt) | 
|  | { | 
|  | Channel *c; | 
|  | int id; | 
|  | u_int adjust; | 
|  |  | 
|  | if (!compat20) | 
|  | return; | 
|  |  | 
|  | /* Get the channel number and verify it. */ | 
|  | id = packet_get_int(); | 
|  | c = channel_lookup(id); | 
|  |  | 
|  | if (c == NULL) { | 
|  | logit("Received window adjust for non-open channel %d.", id); | 
|  | return; | 
|  | } | 
|  | adjust = packet_get_int(); | 
|  | packet_check_eom(); | 
|  | debug2("channel %d: rcvd adjust %u", id, adjust); | 
|  | c->remote_window += adjust; | 
|  | } | 
|  |  | 
|  | /* ARGSUSED */ | 
|  | void | 
|  | channel_input_port_open(int type, u_int32_t seq, void *ctxt) | 
|  | { | 
|  | Channel *c = NULL; | 
|  | u_short host_port; | 
|  | char *host, *originator_string; | 
|  | int remote_id; | 
|  |  | 
|  | remote_id = packet_get_int(); | 
|  | host = packet_get_string(NULL); | 
|  | host_port = packet_get_int(); | 
|  |  | 
|  | if (packet_get_protocol_flags() & SSH_PROTOFLAG_HOST_IN_FWD_OPEN) { | 
|  | originator_string = packet_get_string(NULL); | 
|  | } else { | 
|  | originator_string = xstrdup("unknown (remote did not supply name)"); | 
|  | } | 
|  | packet_check_eom(); | 
|  | c = channel_connect_to(host, host_port, | 
|  | "connected socket", originator_string); | 
|  | free(originator_string); | 
|  | free(host); | 
|  | if (c == NULL) { | 
|  | packet_start(SSH_MSG_CHANNEL_OPEN_FAILURE); | 
|  | packet_put_int(remote_id); | 
|  | packet_send(); | 
|  | } else | 
|  | c->remote_id = remote_id; | 
|  | } | 
|  |  | 
|  | /* ARGSUSED */ | 
|  | void | 
|  | channel_input_status_confirm(int type, u_int32_t seq, void *ctxt) | 
|  | { | 
|  | Channel *c; | 
|  | struct channel_confirm *cc; | 
|  | int id; | 
|  |  | 
|  | /* Reset keepalive timeout */ | 
|  | packet_set_alive_timeouts(0); | 
|  |  | 
|  | id = packet_get_int(); | 
|  | packet_check_eom(); | 
|  |  | 
|  | debug2("channel_input_status_confirm: type %d id %d", type, id); | 
|  |  | 
|  | if ((c = channel_lookup(id)) == NULL) { | 
|  | logit("channel_input_status_confirm: %d: unknown", id); | 
|  | return; | 
|  | } | 
|  | ; | 
|  | if ((cc = TAILQ_FIRST(&c->status_confirms)) == NULL) | 
|  | return; | 
|  | cc->cb(type, c, cc->ctx); | 
|  | TAILQ_REMOVE(&c->status_confirms, cc, entry); | 
|  | explicit_bzero(cc, sizeof(*cc)); | 
|  | free(cc); | 
|  | } | 
|  |  | 
|  | /* -- tcp forwarding */ | 
|  |  | 
|  | void | 
|  | channel_set_af(int af) | 
|  | { | 
|  | IPv4or6 = af; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Determine whether or not a port forward listens to loopback, the | 
|  | * specified address or wildcard. On the client, a specified bind | 
|  | * address will always override gateway_ports. On the server, a | 
|  | * gateway_ports of 1 (``yes'') will override the client's specification | 
|  | * and force a wildcard bind, whereas a value of 2 (``clientspecified'') | 
|  | * will bind to whatever address the client asked for. | 
|  | * | 
|  | * Special-case listen_addrs are: | 
|  | * | 
|  | * "0.0.0.0"               -> wildcard v4/v6 if SSH_OLD_FORWARD_ADDR | 
|  | * "" (empty string), "*"  -> wildcard v4/v6 | 
|  | * "localhost"             -> loopback v4/v6 | 
|  | * "127.0.0.1" / "::1"     -> accepted even if gateway_ports isn't set | 
|  | */ | 
|  | static const char * | 
|  | channel_fwd_bind_addr(const char *listen_addr, int *wildcardp, | 
|  | int is_client, int gateway_ports) | 
|  | { | 
|  | const char *addr = NULL; | 
|  | int wildcard = 0; | 
|  |  | 
|  | if (listen_addr == NULL) { | 
|  | /* No address specified: default to gateway_ports setting */ | 
|  | if (gateway_ports) | 
|  | wildcard = 1; | 
|  | } else if (gateway_ports || is_client) { | 
|  | if (((datafellows & SSH_OLD_FORWARD_ADDR) && | 
|  | strcmp(listen_addr, "0.0.0.0") == 0 && is_client == 0) || | 
|  | *listen_addr == '\0' || strcmp(listen_addr, "*") == 0 || | 
|  | (!is_client && gateway_ports == 1)) { | 
|  | wildcard = 1; | 
|  | /* | 
|  | * Notify client if they requested a specific listen | 
|  | * address and it was overridden. | 
|  | */ | 
|  | if (*listen_addr != '\0' && | 
|  | strcmp(listen_addr, "0.0.0.0") != 0 && | 
|  | strcmp(listen_addr, "*") != 0) { | 
|  | packet_send_debug("Forwarding listen address " | 
|  | "\"%s\" overridden by server " | 
|  | "GatewayPorts", listen_addr); | 
|  | } | 
|  | } else if (strcmp(listen_addr, "localhost") != 0 || | 
|  | strcmp(listen_addr, "127.0.0.1") == 0 || | 
|  | strcmp(listen_addr, "::1") == 0) { | 
|  | /* Accept localhost address when GatewayPorts=yes */ | 
|  | addr = listen_addr; | 
|  | } | 
|  | } else if (strcmp(listen_addr, "127.0.0.1") == 0 || | 
|  | strcmp(listen_addr, "::1") == 0) { | 
|  | /* | 
|  | * If a specific IPv4/IPv6 localhost address has been | 
|  | * requested then accept it even if gateway_ports is in | 
|  | * effect. This allows the client to prefer IPv4 or IPv6. | 
|  | */ | 
|  | addr = listen_addr; | 
|  | } | 
|  | if (wildcardp != NULL) | 
|  | *wildcardp = wildcard; | 
|  | return addr; | 
|  | } | 
|  |  | 
|  | static int | 
|  | channel_setup_fwd_listener(int type, const char *listen_addr, | 
|  | u_short listen_port, int *allocated_listen_port, | 
|  | const char *host_to_connect, u_short port_to_connect, int gateway_ports) | 
|  | { | 
|  | Channel *c; | 
|  | int sock, r, success = 0, wildcard = 0, is_client; | 
|  | struct addrinfo hints, *ai, *aitop; | 
|  | const char *host, *addr; | 
|  | char ntop[NI_MAXHOST], strport[NI_MAXSERV]; | 
|  | in_port_t *lport_p; | 
|  |  | 
|  | host = (type == SSH_CHANNEL_RPORT_LISTENER) ? | 
|  | listen_addr : host_to_connect; | 
|  | is_client = (type == SSH_CHANNEL_PORT_LISTENER); | 
|  |  | 
|  | if (host == NULL) { | 
|  | error("No forward host name."); | 
|  | return 0; | 
|  | } | 
|  | if (strlen(host) >= NI_MAXHOST) { | 
|  | error("Forward host name too long."); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Determine the bind address, cf. channel_fwd_bind_addr() comment */ | 
|  | addr = channel_fwd_bind_addr(listen_addr, &wildcard, | 
|  | is_client, gateway_ports); | 
|  | debug3("channel_setup_fwd_listener: type %d wildcard %d addr %s", | 
|  | type, wildcard, (addr == NULL) ? "NULL" : addr); | 
|  |  | 
|  | /* | 
|  | * getaddrinfo returns a loopback address if the hostname is | 
|  | * set to NULL and hints.ai_flags is not AI_PASSIVE | 
|  | */ | 
|  | memset(&hints, 0, sizeof(hints)); | 
|  | hints.ai_family = IPv4or6; | 
|  | hints.ai_flags = wildcard ? AI_PASSIVE : 0; | 
|  | hints.ai_socktype = SOCK_STREAM; | 
|  | snprintf(strport, sizeof strport, "%d", listen_port); | 
|  | if ((r = getaddrinfo(addr, strport, &hints, &aitop)) != 0) { | 
|  | if (addr == NULL) { | 
|  | /* This really shouldn't happen */ | 
|  | packet_disconnect("getaddrinfo: fatal error: %s", | 
|  | ssh_gai_strerror(r)); | 
|  | } else { | 
|  | error("channel_setup_fwd_listener: " | 
|  | "getaddrinfo(%.64s): %s", addr, | 
|  | ssh_gai_strerror(r)); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  | if (allocated_listen_port != NULL) | 
|  | *allocated_listen_port = 0; | 
|  | for (ai = aitop; ai; ai = ai->ai_next) { | 
|  | switch (ai->ai_family) { | 
|  | case AF_INET: | 
|  | lport_p = &((struct sockaddr_in *)ai->ai_addr)-> | 
|  | sin_port; | 
|  | break; | 
|  | case AF_INET6: | 
|  | lport_p = &((struct sockaddr_in6 *)ai->ai_addr)-> | 
|  | sin6_port; | 
|  | break; | 
|  | default: | 
|  | continue; | 
|  | } | 
|  | /* | 
|  | * If allocating a port for -R forwards, then use the | 
|  | * same port for all address families. | 
|  | */ | 
|  | if (type == SSH_CHANNEL_RPORT_LISTENER && listen_port == 0 && | 
|  | allocated_listen_port != NULL && *allocated_listen_port > 0) | 
|  | *lport_p = htons(*allocated_listen_port); | 
|  |  | 
|  | if (getnameinfo(ai->ai_addr, ai->ai_addrlen, ntop, sizeof(ntop), | 
|  | strport, sizeof(strport), NI_NUMERICHOST|NI_NUMERICSERV) != 0) { | 
|  | error("channel_setup_fwd_listener: getnameinfo failed"); | 
|  | continue; | 
|  | } | 
|  | /* Create a port to listen for the host. */ | 
|  | sock = socket(ai->ai_family, ai->ai_socktype, ai->ai_protocol); | 
|  | if (sock < 0) { | 
|  | /* this is no error since kernel may not support ipv6 */ | 
|  | verbose("socket: %.100s", strerror(errno)); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | channel_set_reuseaddr(sock); | 
|  | if (ai->ai_family == AF_INET6) | 
|  | sock_set_v6only(sock); | 
|  |  | 
|  | debug("Local forwarding listening on %s port %s.", | 
|  | ntop, strport); | 
|  |  | 
|  | /* Bind the socket to the address. */ | 
|  | if (bind(sock, ai->ai_addr, ai->ai_addrlen) < 0) { | 
|  | /* address can be in use ipv6 address is already bound */ | 
|  | if (!ai->ai_next) | 
|  | error("bind: %.100s", strerror(errno)); | 
|  | else | 
|  | verbose("bind: %.100s", strerror(errno)); | 
|  |  | 
|  | close(sock); | 
|  | continue; | 
|  | } | 
|  | /* Start listening for connections on the socket. */ | 
|  | if (listen(sock, SSH_LISTEN_BACKLOG) < 0) { | 
|  | error("listen: %.100s", strerror(errno)); | 
|  | close(sock); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * listen_port == 0 requests a dynamically allocated port - | 
|  | * record what we got. | 
|  | */ | 
|  | if (type == SSH_CHANNEL_RPORT_LISTENER && listen_port == 0 && | 
|  | allocated_listen_port != NULL && | 
|  | *allocated_listen_port == 0) { | 
|  | *allocated_listen_port = get_sock_port(sock, 1); | 
|  | debug("Allocated listen port %d", | 
|  | *allocated_listen_port); | 
|  | } | 
|  |  | 
|  | /* Allocate a channel number for the socket. */ | 
|  | c = channel_new("port listener", type, sock, sock, -1, | 
|  | CHAN_TCP_WINDOW_DEFAULT, CHAN_TCP_PACKET_DEFAULT, | 
|  | 0, "port listener", 1); | 
|  | c->path = xstrdup(host); | 
|  | c->host_port = port_to_connect; | 
|  | c->listening_addr = addr == NULL ? NULL : xstrdup(addr); | 
|  | if (listen_port == 0 && allocated_listen_port != NULL && | 
|  | !(datafellows & SSH_BUG_DYNAMIC_RPORT)) | 
|  | c->listening_port = *allocated_listen_port; | 
|  | else | 
|  | c->listening_port = listen_port; | 
|  | success = 1; | 
|  | } | 
|  | if (success == 0) | 
|  | error("channel_setup_fwd_listener: cannot listen to port: %d", | 
|  | listen_port); | 
|  | freeaddrinfo(aitop); | 
|  | return success; | 
|  | } | 
|  |  | 
|  | int | 
|  | channel_cancel_rport_listener(const char *host, u_short port) | 
|  | { | 
|  | u_int i; | 
|  | int found = 0; | 
|  |  | 
|  | for (i = 0; i < channels_alloc; i++) { | 
|  | Channel *c = channels[i]; | 
|  | if (c == NULL || c->type != SSH_CHANNEL_RPORT_LISTENER) | 
|  | continue; | 
|  | if (strcmp(c->path, host) == 0 && c->listening_port == port) { | 
|  | debug2("%s: close channel %d", __func__, i); | 
|  | channel_free(c); | 
|  | found = 1; | 
|  | } | 
|  | } | 
|  |  | 
|  | return (found); | 
|  | } | 
|  |  | 
|  | int | 
|  | channel_cancel_lport_listener(const char *lhost, u_short lport, | 
|  | int cport, int gateway_ports) | 
|  | { | 
|  | u_int i; | 
|  | int found = 0; | 
|  | const char *addr = channel_fwd_bind_addr(lhost, NULL, 1, gateway_ports); | 
|  |  | 
|  | for (i = 0; i < channels_alloc; i++) { | 
|  | Channel *c = channels[i]; | 
|  | if (c == NULL || c->type != SSH_CHANNEL_PORT_LISTENER) | 
|  | continue; | 
|  | if (c->listening_port != lport) | 
|  | continue; | 
|  | if (cport == CHANNEL_CANCEL_PORT_STATIC) { | 
|  | /* skip dynamic forwardings */ | 
|  | if (c->host_port == 0) | 
|  | continue; | 
|  | } else { | 
|  | if (c->host_port != cport) | 
|  | continue; | 
|  | } | 
|  | if ((c->listening_addr == NULL && addr != NULL) || | 
|  | (c->listening_addr != NULL && addr == NULL)) | 
|  | continue; | 
|  | if (addr == NULL || strcmp(c->listening_addr, addr) == 0) { | 
|  | debug2("%s: close channel %d", __func__, i); | 
|  | channel_free(c); | 
|  | found = 1; | 
|  | } | 
|  | } | 
|  |  | 
|  | return (found); | 
|  | } | 
|  |  | 
|  | /* protocol local port fwd, used by ssh (and sshd in v1) */ | 
|  | int | 
|  | channel_setup_local_fwd_listener(const char *listen_host, u_short listen_port, | 
|  | const char *host_to_connect, u_short port_to_connect, int gateway_ports) | 
|  | { | 
|  | return channel_setup_fwd_listener(SSH_CHANNEL_PORT_LISTENER, | 
|  | listen_host, listen_port, NULL, host_to_connect, port_to_connect, | 
|  | gateway_ports); | 
|  | } | 
|  |  | 
|  | /* protocol v2 remote port fwd, used by sshd */ | 
|  | int | 
|  | channel_setup_remote_fwd_listener(const char *listen_address, | 
|  | u_short listen_port, int *allocated_listen_port, int gateway_ports) | 
|  | { | 
|  | return channel_setup_fwd_listener(SSH_CHANNEL_RPORT_LISTENER, | 
|  | listen_address, listen_port, allocated_listen_port, | 
|  | NULL, 0, gateway_ports); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Translate the requested rfwd listen host to something usable for | 
|  | * this server. | 
|  | */ | 
|  | static const char * | 
|  | channel_rfwd_bind_host(const char *listen_host) | 
|  | { | 
|  | if (listen_host == NULL) { | 
|  | if (datafellows & SSH_BUG_RFWD_ADDR) | 
|  | return "127.0.0.1"; | 
|  | else | 
|  | return "localhost"; | 
|  | } else if (*listen_host == '\0' || strcmp(listen_host, "*") == 0) { | 
|  | if (datafellows & SSH_BUG_RFWD_ADDR) | 
|  | return "0.0.0.0"; | 
|  | else | 
|  | return ""; | 
|  | } else | 
|  | return listen_host; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Initiate forwarding of connections to port "port" on remote host through | 
|  | * the secure channel to host:port from local side. | 
|  | * Returns handle (index) for updating the dynamic listen port with | 
|  | * channel_update_permitted_opens(). | 
|  | */ | 
|  | int | 
|  | channel_request_remote_forwarding(const char *listen_host, u_short listen_port, | 
|  | const char *host_to_connect, u_short port_to_connect) | 
|  | { | 
|  | int type, success = 0, idx = -1; | 
|  |  | 
|  | /* Send the forward request to the remote side. */ | 
|  | if (compat20) { | 
|  | packet_start(SSH2_MSG_GLOBAL_REQUEST); | 
|  | packet_put_cstring("tcpip-forward"); | 
|  | packet_put_char(1);		/* boolean: want reply */ | 
|  | packet_put_cstring(channel_rfwd_bind_host(listen_host)); | 
|  | packet_put_int(listen_port); | 
|  | packet_send(); | 
|  | packet_write_wait(); | 
|  | /* Assume that server accepts the request */ | 
|  | success = 1; | 
|  | } else { | 
|  | packet_start(SSH_CMSG_PORT_FORWARD_REQUEST); | 
|  | packet_put_int(listen_port); | 
|  | packet_put_cstring(host_to_connect); | 
|  | packet_put_int(port_to_connect); | 
|  | packet_send(); | 
|  | packet_write_wait(); | 
|  |  | 
|  | /* Wait for response from the remote side. */ | 
|  | type = packet_read(); | 
|  | switch (type) { | 
|  | case SSH_SMSG_SUCCESS: | 
|  | success = 1; | 
|  | break; | 
|  | case SSH_SMSG_FAILURE: | 
|  | break; | 
|  | default: | 
|  | /* Unknown packet */ | 
|  | packet_disconnect("Protocol error for port forward request:" | 
|  | "received packet type %d.", type); | 
|  | } | 
|  | } | 
|  | if (success) { | 
|  | /* Record that connection to this host/port is permitted. */ | 
|  | permitted_opens = xrealloc(permitted_opens, | 
|  | num_permitted_opens + 1, sizeof(*permitted_opens)); | 
|  | idx = num_permitted_opens++; | 
|  | permitted_opens[idx].host_to_connect = xstrdup(host_to_connect); | 
|  | permitted_opens[idx].port_to_connect = port_to_connect; | 
|  | permitted_opens[idx].listen_port = listen_port; | 
|  | } | 
|  | return (idx); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Request cancellation of remote forwarding of connection host:port from | 
|  | * local side. | 
|  | */ | 
|  | int | 
|  | channel_request_rforward_cancel(const char *host, u_short port) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | if (!compat20) | 
|  | return -1; | 
|  |  | 
|  | for (i = 0; i < num_permitted_opens; i++) { | 
|  | if (permitted_opens[i].host_to_connect != NULL && | 
|  | permitted_opens[i].listen_port == port) | 
|  | break; | 
|  | } | 
|  | if (i >= num_permitted_opens) { | 
|  | debug("%s: requested forward not found", __func__); | 
|  | return -1; | 
|  | } | 
|  | packet_start(SSH2_MSG_GLOBAL_REQUEST); | 
|  | packet_put_cstring("cancel-tcpip-forward"); | 
|  | packet_put_char(0); | 
|  | packet_put_cstring(channel_rfwd_bind_host(host)); | 
|  | packet_put_int(port); | 
|  | packet_send(); | 
|  |  | 
|  | permitted_opens[i].listen_port = 0; | 
|  | permitted_opens[i].port_to_connect = 0; | 
|  | free(permitted_opens[i].host_to_connect); | 
|  | permitted_opens[i].host_to_connect = NULL; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This is called after receiving CHANNEL_FORWARDING_REQUEST.  This initates | 
|  | * listening for the port, and sends back a success reply (or disconnect | 
|  | * message if there was an error). | 
|  | */ | 
|  | int | 
|  | channel_input_port_forward_request(int is_root, int gateway_ports) | 
|  | { | 
|  | u_short port, host_port; | 
|  | int success = 0; | 
|  | char *hostname; | 
|  |  | 
|  | /* Get arguments from the packet. */ | 
|  | port = packet_get_int(); | 
|  | hostname = packet_get_string(NULL); | 
|  | host_port = packet_get_int(); | 
|  |  | 
|  | #ifndef HAVE_CYGWIN | 
|  | /* | 
|  | * Check that an unprivileged user is not trying to forward a | 
|  | * privileged port. | 
|  | */ | 
|  | if (port < IPPORT_RESERVED && !is_root) | 
|  | packet_disconnect( | 
|  | "Requested forwarding of port %d but user is not root.", | 
|  | port); | 
|  | if (host_port == 0) | 
|  | packet_disconnect("Dynamic forwarding denied."); | 
|  | #endif | 
|  |  | 
|  | /* Initiate forwarding */ | 
|  | success = channel_setup_local_fwd_listener(NULL, port, hostname, | 
|  | host_port, gateway_ports); | 
|  |  | 
|  | /* Free the argument string. */ | 
|  | free(hostname); | 
|  |  | 
|  | return (success ? 0 : -1); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Permits opening to any host/port if permitted_opens[] is empty.  This is | 
|  | * usually called by the server, because the user could connect to any port | 
|  | * anyway, and the server has no way to know but to trust the client anyway. | 
|  | */ | 
|  | void | 
|  | channel_permit_all_opens(void) | 
|  | { | 
|  | if (num_permitted_opens == 0) | 
|  | all_opens_permitted = 1; | 
|  | } | 
|  |  | 
|  | void | 
|  | channel_add_permitted_opens(char *host, int port) | 
|  | { | 
|  | debug("allow port forwarding to host %s port %d", host, port); | 
|  |  | 
|  | permitted_opens = xrealloc(permitted_opens, | 
|  | num_permitted_opens + 1, sizeof(*permitted_opens)); | 
|  | permitted_opens[num_permitted_opens].host_to_connect = xstrdup(host); | 
|  | permitted_opens[num_permitted_opens].port_to_connect = port; | 
|  | num_permitted_opens++; | 
|  |  | 
|  | all_opens_permitted = 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Update the listen port for a dynamic remote forward, after | 
|  | * the actual 'newport' has been allocated. If 'newport' < 0 is | 
|  | * passed then they entry will be invalidated. | 
|  | */ | 
|  | void | 
|  | channel_update_permitted_opens(int idx, int newport) | 
|  | { | 
|  | if (idx < 0 || idx >= num_permitted_opens) { | 
|  | debug("channel_update_permitted_opens: index out of range:" | 
|  | " %d num_permitted_opens %d", idx, num_permitted_opens); | 
|  | return; | 
|  | } | 
|  | debug("%s allowed port %d for forwarding to host %s port %d", | 
|  | newport > 0 ? "Updating" : "Removing", | 
|  | newport, | 
|  | permitted_opens[idx].host_to_connect, | 
|  | permitted_opens[idx].port_to_connect); | 
|  | if (newport >= 0)  { | 
|  | permitted_opens[idx].listen_port = | 
|  | (datafellows & SSH_BUG_DYNAMIC_RPORT) ? 0 : newport; | 
|  | } else { | 
|  | permitted_opens[idx].listen_port = 0; | 
|  | permitted_opens[idx].port_to_connect = 0; | 
|  | free(permitted_opens[idx].host_to_connect); | 
|  | permitted_opens[idx].host_to_connect = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | int | 
|  | channel_add_adm_permitted_opens(char *host, int port) | 
|  | { | 
|  | debug("config allows port forwarding to host %s port %d", host, port); | 
|  |  | 
|  | permitted_adm_opens = xrealloc(permitted_adm_opens, | 
|  | num_adm_permitted_opens + 1, sizeof(*permitted_adm_opens)); | 
|  | permitted_adm_opens[num_adm_permitted_opens].host_to_connect | 
|  | = xstrdup(host); | 
|  | permitted_adm_opens[num_adm_permitted_opens].port_to_connect = port; | 
|  | return ++num_adm_permitted_opens; | 
|  | } | 
|  |  | 
|  | void | 
|  | channel_disable_adm_local_opens(void) | 
|  | { | 
|  | channel_clear_adm_permitted_opens(); | 
|  | permitted_adm_opens = xmalloc(sizeof(*permitted_adm_opens)); | 
|  | permitted_adm_opens[num_adm_permitted_opens].host_to_connect = NULL; | 
|  | num_adm_permitted_opens = 1; | 
|  | } | 
|  |  | 
|  | void | 
|  | channel_clear_permitted_opens(void) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < num_permitted_opens; i++) | 
|  | free(permitted_opens[i].host_to_connect); | 
|  | free(permitted_opens); | 
|  | permitted_opens = NULL; | 
|  | num_permitted_opens = 0; | 
|  | } | 
|  |  | 
|  | void | 
|  | channel_clear_adm_permitted_opens(void) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < num_adm_permitted_opens; i++) | 
|  | free(permitted_adm_opens[i].host_to_connect); | 
|  | free(permitted_adm_opens); | 
|  | permitted_adm_opens = NULL; | 
|  | num_adm_permitted_opens = 0; | 
|  | } | 
|  |  | 
|  | void | 
|  | channel_print_adm_permitted_opens(void) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | printf("permitopen"); | 
|  | if (num_adm_permitted_opens == 0) { | 
|  | printf(" any\n"); | 
|  | return; | 
|  | } | 
|  | for (i = 0; i < num_adm_permitted_opens; i++) | 
|  | if (permitted_adm_opens[i].host_to_connect == NULL) | 
|  | printf(" none"); | 
|  | else | 
|  | printf(" %s:%d", permitted_adm_opens[i].host_to_connect, | 
|  | permitted_adm_opens[i].port_to_connect); | 
|  | printf("\n"); | 
|  | } | 
|  |  | 
|  | /* returns port number, FWD_PERMIT_ANY_PORT or -1 on error */ | 
|  | int | 
|  | permitopen_port(const char *p) | 
|  | { | 
|  | int port; | 
|  |  | 
|  | if (strcmp(p, "*") == 0) | 
|  | return FWD_PERMIT_ANY_PORT; | 
|  | if ((port = a2port(p)) > 0) | 
|  | return port; | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | static int | 
|  | port_match(u_short allowedport, u_short requestedport) | 
|  | { | 
|  | if (allowedport == FWD_PERMIT_ANY_PORT || | 
|  | allowedport == requestedport) | 
|  | return 1; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Try to start non-blocking connect to next host in cctx list */ | 
|  | static int | 
|  | connect_next(struct channel_connect *cctx) | 
|  | { | 
|  | int sock, saved_errno; | 
|  | char ntop[NI_MAXHOST], strport[NI_MAXSERV]; | 
|  |  | 
|  | for (; cctx->ai; cctx->ai = cctx->ai->ai_next) { | 
|  | if (cctx->ai->ai_family != AF_INET && | 
|  | cctx->ai->ai_family != AF_INET6) | 
|  | continue; | 
|  | if (getnameinfo(cctx->ai->ai_addr, cctx->ai->ai_addrlen, | 
|  | ntop, sizeof(ntop), strport, sizeof(strport), | 
|  | NI_NUMERICHOST|NI_NUMERICSERV) != 0) { | 
|  | error("connect_next: getnameinfo failed"); | 
|  | continue; | 
|  | } | 
|  | if ((sock = socket(cctx->ai->ai_family, cctx->ai->ai_socktype, | 
|  | cctx->ai->ai_protocol)) == -1) { | 
|  | if (cctx->ai->ai_next == NULL) | 
|  | error("socket: %.100s", strerror(errno)); | 
|  | else | 
|  | verbose("socket: %.100s", strerror(errno)); | 
|  | continue; | 
|  | } | 
|  | if (set_nonblock(sock) == -1) | 
|  | fatal("%s: set_nonblock(%d)", __func__, sock); | 
|  | if (connect(sock, cctx->ai->ai_addr, | 
|  | cctx->ai->ai_addrlen) == -1 && errno != EINPROGRESS) { | 
|  | debug("connect_next: host %.100s ([%.100s]:%s): " | 
|  | "%.100s", cctx->host, ntop, strport, | 
|  | strerror(errno)); | 
|  | saved_errno = errno; | 
|  | close(sock); | 
|  | errno = saved_errno; | 
|  | continue;	/* fail -- try next */ | 
|  | } | 
|  | debug("connect_next: host %.100s ([%.100s]:%s) " | 
|  | "in progress, fd=%d", cctx->host, ntop, strport, sock); | 
|  | cctx->ai = cctx->ai->ai_next; | 
|  | set_nodelay(sock); | 
|  | return sock; | 
|  | } | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | static void | 
|  | channel_connect_ctx_free(struct channel_connect *cctx) | 
|  | { | 
|  | free(cctx->host); | 
|  | if (cctx->aitop) | 
|  | freeaddrinfo(cctx->aitop); | 
|  | memset(cctx, 0, sizeof(*cctx)); | 
|  | } | 
|  |  | 
|  | /* Return CONNECTING channel to remote host, port */ | 
|  | static Channel * | 
|  | connect_to(const char *host, u_short port, char *ctype, char *rname) | 
|  | { | 
|  | struct addrinfo hints; | 
|  | int gaierr; | 
|  | int sock = -1; | 
|  | char strport[NI_MAXSERV]; | 
|  | struct channel_connect cctx; | 
|  | Channel *c; | 
|  |  | 
|  | memset(&cctx, 0, sizeof(cctx)); | 
|  | memset(&hints, 0, sizeof(hints)); | 
|  | hints.ai_family = IPv4or6; | 
|  | hints.ai_socktype = SOCK_STREAM; | 
|  | snprintf(strport, sizeof strport, "%d", port); | 
|  | if ((gaierr = getaddrinfo(host, strport, &hints, &cctx.aitop)) != 0) { | 
|  | error("connect_to %.100s: unknown host (%s)", host, | 
|  | ssh_gai_strerror(gaierr)); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | cctx.host = xstrdup(host); | 
|  | cctx.port = port; | 
|  | cctx.ai = cctx.aitop; | 
|  |  | 
|  | if ((sock = connect_next(&cctx)) == -1) { | 
|  | error("connect to %.100s port %d failed: %s", | 
|  | host, port, strerror(errno)); | 
|  | channel_connect_ctx_free(&cctx); | 
|  | return NULL; | 
|  | } | 
|  | c = channel_new(ctype, SSH_CHANNEL_CONNECTING, sock, sock, -1, | 
|  | CHAN_TCP_WINDOW_DEFAULT, CHAN_TCP_PACKET_DEFAULT, 0, rname, 1); | 
|  | c->connect_ctx = cctx; | 
|  | return c; | 
|  | } | 
|  |  | 
|  | Channel * | 
|  | channel_connect_by_listen_address(u_short listen_port, char *ctype, char *rname) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < num_permitted_opens; i++) { | 
|  | if (permitted_opens[i].host_to_connect != NULL && | 
|  | port_match(permitted_opens[i].listen_port, listen_port)) { | 
|  | return connect_to( | 
|  | permitted_opens[i].host_to_connect, | 
|  | permitted_opens[i].port_to_connect, ctype, rname); | 
|  | } | 
|  | } | 
|  | error("WARNING: Server requests forwarding for unknown listen_port %d", | 
|  | listen_port); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /* Check if connecting to that port is permitted and connect. */ | 
|  | Channel * | 
|  | channel_connect_to(const char *host, u_short port, char *ctype, char *rname) | 
|  | { | 
|  | int i, permit, permit_adm = 1; | 
|  |  | 
|  | permit = all_opens_permitted; | 
|  | if (!permit) { | 
|  | for (i = 0; i < num_permitted_opens; i++) | 
|  | if (permitted_opens[i].host_to_connect != NULL && | 
|  | port_match(permitted_opens[i].port_to_connect, port) && | 
|  | strcmp(permitted_opens[i].host_to_connect, host) == 0) | 
|  | permit = 1; | 
|  | } | 
|  |  | 
|  | if (num_adm_permitted_opens > 0) { | 
|  | permit_adm = 0; | 
|  | for (i = 0; i < num_adm_permitted_opens; i++) | 
|  | if (permitted_adm_opens[i].host_to_connect != NULL && | 
|  | port_match(permitted_adm_opens[i].port_to_connect, port) && | 
|  | strcmp(permitted_adm_opens[i].host_to_connect, host) | 
|  | == 0) | 
|  | permit_adm = 1; | 
|  | } | 
|  |  | 
|  | if (!permit || !permit_adm) { | 
|  | logit("Received request to connect to host %.100s port %d, " | 
|  | "but the request was denied.", host, port); | 
|  | return NULL; | 
|  | } | 
|  | return connect_to(host, port, ctype, rname); | 
|  | } | 
|  |  | 
|  | void | 
|  | channel_send_window_changes(void) | 
|  | { | 
|  | u_int i; | 
|  | struct winsize ws; | 
|  |  | 
|  | for (i = 0; i < channels_alloc; i++) { | 
|  | if (channels[i] == NULL || !channels[i]->client_tty || | 
|  | channels[i]->type != SSH_CHANNEL_OPEN) | 
|  | continue; | 
|  | if (ioctl(channels[i]->rfd, TIOCGWINSZ, &ws) < 0) | 
|  | continue; | 
|  | channel_request_start(i, "window-change", 0); | 
|  | packet_put_int((u_int)ws.ws_col); | 
|  | packet_put_int((u_int)ws.ws_row); | 
|  | packet_put_int((u_int)ws.ws_xpixel); | 
|  | packet_put_int((u_int)ws.ws_ypixel); | 
|  | packet_send(); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* -- X11 forwarding */ | 
|  |  | 
|  | /* | 
|  | * Creates an internet domain socket for listening for X11 connections. | 
|  | * Returns 0 and a suitable display number for the DISPLAY variable | 
|  | * stored in display_numberp , or -1 if an error occurs. | 
|  | */ | 
|  | int | 
|  | x11_create_display_inet(int x11_display_offset, int x11_use_localhost, | 
|  | int single_connection, u_int *display_numberp, int **chanids) | 
|  | { | 
|  | Channel *nc = NULL; | 
|  | int display_number, sock; | 
|  | u_short port; | 
|  | struct addrinfo hints, *ai, *aitop; | 
|  | char strport[NI_MAXSERV]; | 
|  | int gaierr, n, num_socks = 0, socks[NUM_SOCKS]; | 
|  |  | 
|  | if (chanids == NULL) | 
|  | return -1; | 
|  |  | 
|  | for (display_number = x11_display_offset; | 
|  | display_number < MAX_DISPLAYS; | 
|  | display_number++) { | 
|  | port = 6000 + display_number; | 
|  | memset(&hints, 0, sizeof(hints)); | 
|  | hints.ai_family = IPv4or6; | 
|  | hints.ai_flags = x11_use_localhost ? 0: AI_PASSIVE; | 
|  | hints.ai_socktype = SOCK_STREAM; | 
|  | snprintf(strport, sizeof strport, "%d", port); | 
|  | if ((gaierr = getaddrinfo(NULL, strport, &hints, &aitop)) != 0) { | 
|  | error("getaddrinfo: %.100s", ssh_gai_strerror(gaierr)); | 
|  | return -1; | 
|  | } | 
|  | for (ai = aitop; ai; ai = ai->ai_next) { | 
|  | if (ai->ai_family != AF_INET && ai->ai_family != AF_INET6) | 
|  | continue; | 
|  | sock = socket(ai->ai_family, ai->ai_socktype, | 
|  | ai->ai_protocol); | 
|  | if (sock < 0) { | 
|  | if ((errno != EINVAL) && (errno != EAFNOSUPPORT) | 
|  | #ifdef EPFNOSUPPORT | 
|  | && (errno != EPFNOSUPPORT) | 
|  | #endif | 
|  | ) { | 
|  | error("socket: %.100s", strerror(errno)); | 
|  | freeaddrinfo(aitop); | 
|  | return -1; | 
|  | } else { | 
|  | debug("x11_create_display_inet: Socket family %d not supported", | 
|  | ai->ai_family); | 
|  | continue; | 
|  | } | 
|  | } | 
|  | if (ai->ai_family == AF_INET6) | 
|  | sock_set_v6only(sock); | 
|  | if (x11_use_localhost) | 
|  | channel_set_reuseaddr(sock); | 
|  | if (bind(sock, ai->ai_addr, ai->ai_addrlen) < 0) { | 
|  | debug2("bind port %d: %.100s", port, strerror(errno)); | 
|  | close(sock); | 
|  |  | 
|  | for (n = 0; n < num_socks; n++) { | 
|  | close(socks[n]); | 
|  | } | 
|  | num_socks = 0; | 
|  | break; | 
|  | } | 
|  | socks[num_socks++] = sock; | 
|  | if (num_socks == NUM_SOCKS) | 
|  | break; | 
|  | } | 
|  | freeaddrinfo(aitop); | 
|  | if (num_socks > 0) | 
|  | break; | 
|  | } | 
|  | if (display_number >= MAX_DISPLAYS) { | 
|  | error("Failed to allocate internet-domain X11 display socket."); | 
|  | return -1; | 
|  | } | 
|  | /* Start listening for connections on the socket. */ | 
|  | for (n = 0; n < num_socks; n++) { | 
|  | sock = socks[n]; | 
|  | if (listen(sock, SSH_LISTEN_BACKLOG) < 0) { | 
|  | error("listen: %.100s", strerror(errno)); | 
|  | close(sock); | 
|  | return -1; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Allocate a channel for each socket. */ | 
|  | *chanids = xcalloc(num_socks + 1, sizeof(**chanids)); | 
|  | for (n = 0; n < num_socks; n++) { | 
|  | sock = socks[n]; | 
|  | nc = channel_new("x11 listener", | 
|  | SSH_CHANNEL_X11_LISTENER, sock, sock, -1, | 
|  | CHAN_X11_WINDOW_DEFAULT, CHAN_X11_PACKET_DEFAULT, | 
|  | 0, "X11 inet listener", 1); | 
|  | nc->single_connection = single_connection; | 
|  | (*chanids)[n] = nc->self; | 
|  | } | 
|  | (*chanids)[n] = -1; | 
|  |  | 
|  | /* Return the display number for the DISPLAY environment variable. */ | 
|  | *display_numberp = display_number; | 
|  | return (0); | 
|  | } | 
|  |  | 
|  | static int | 
|  | connect_local_xsocket_path(const char *pathname) | 
|  | { | 
|  | int sock; | 
|  | struct sockaddr_un addr; | 
|  |  | 
|  | sock = socket(AF_UNIX, SOCK_STREAM, 0); | 
|  | if (sock < 0) | 
|  | error("socket: %.100s", strerror(errno)); | 
|  | memset(&addr, 0, sizeof(addr)); | 
|  | addr.sun_family = AF_UNIX; | 
|  | strlcpy(addr.sun_path, pathname, sizeof addr.sun_path); | 
|  | if (connect(sock, (struct sockaddr *)&addr, sizeof(addr)) == 0) | 
|  | return sock; | 
|  | close(sock); | 
|  | error("connect %.100s: %.100s", addr.sun_path, strerror(errno)); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | static int | 
|  | connect_local_xsocket(u_int dnr) | 
|  | { | 
|  | char buf[1024]; | 
|  | snprintf(buf, sizeof buf, _PATH_UNIX_X, dnr); | 
|  | return connect_local_xsocket_path(buf); | 
|  | } | 
|  |  | 
|  | int | 
|  | x11_connect_display(void) | 
|  | { | 
|  | u_int display_number; | 
|  | const char *display; | 
|  | char buf[1024], *cp; | 
|  | struct addrinfo hints, *ai, *aitop; | 
|  | char strport[NI_MAXSERV]; | 
|  | int gaierr, sock = 0; | 
|  |  | 
|  | /* Try to open a socket for the local X server. */ | 
|  | display = getenv("DISPLAY"); | 
|  | if (!display) { | 
|  | error("DISPLAY not set."); | 
|  | return -1; | 
|  | } | 
|  | /* | 
|  | * Now we decode the value of the DISPLAY variable and make a | 
|  | * connection to the real X server. | 
|  | */ | 
|  |  | 
|  | /* Check if the display is from launchd. */ | 
|  | #ifdef __APPLE__ | 
|  | if (strncmp(display, "/tmp/launch", 11) == 0) { | 
|  | sock = connect_local_xsocket_path(display); | 
|  | if (sock < 0) | 
|  | return -1; | 
|  |  | 
|  | /* OK, we now have a connection to the display. */ | 
|  | return sock; | 
|  | } | 
|  | #endif | 
|  | /* | 
|  | * Check if it is a unix domain socket.  Unix domain displays are in | 
|  | * one of the following formats: unix:d[.s], :d[.s], ::d[.s] | 
|  | */ | 
|  | if (strncmp(display, "unix:", 5) == 0 || | 
|  | display[0] == ':') { | 
|  | /* Connect to the unix domain socket. */ | 
|  | if (sscanf(strrchr(display, ':') + 1, "%u", &display_number) != 1) { | 
|  | error("Could not parse display number from DISPLAY: %.100s", | 
|  | display); | 
|  | return -1; | 
|  | } | 
|  | /* Create a socket. */ | 
|  | sock = connect_local_xsocket(display_number); | 
|  | if (sock < 0) | 
|  | return -1; | 
|  |  | 
|  | /* OK, we now have a connection to the display. */ | 
|  | return sock; | 
|  | } | 
|  | /* | 
|  | * Connect to an inet socket.  The DISPLAY value is supposedly | 
|  | * hostname:d[.s], where hostname may also be numeric IP address. | 
|  | */ | 
|  | strlcpy(buf, display, sizeof(buf)); | 
|  | cp = strchr(buf, ':'); | 
|  | if (!cp) { | 
|  | error("Could not find ':' in DISPLAY: %.100s", display); | 
|  | return -1; | 
|  | } | 
|  | *cp = 0; | 
|  | /* buf now contains the host name.  But first we parse the display number. */ | 
|  | if (sscanf(cp + 1, "%u", &display_number) != 1) { | 
|  | error("Could not parse display number from DISPLAY: %.100s", | 
|  | display); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | /* Look up the host address */ | 
|  | memset(&hints, 0, sizeof(hints)); | 
|  | hints.ai_family = IPv4or6; | 
|  | hints.ai_socktype = SOCK_STREAM; | 
|  | snprintf(strport, sizeof strport, "%u", 6000 + display_number); | 
|  | if ((gaierr = getaddrinfo(buf, strport, &hints, &aitop)) != 0) { | 
|  | error("%.100s: unknown host. (%s)", buf, | 
|  | ssh_gai_strerror(gaierr)); | 
|  | return -1; | 
|  | } | 
|  | for (ai = aitop; ai; ai = ai->ai_next) { | 
|  | /* Create a socket. */ | 
|  | sock = socket(ai->ai_family, ai->ai_socktype, ai->ai_protocol); | 
|  | if (sock < 0) { | 
|  | debug2("socket: %.100s", strerror(errno)); | 
|  | continue; | 
|  | } | 
|  | /* Connect it to the display. */ | 
|  | if (connect(sock, ai->ai_addr, ai->ai_addrlen) < 0) { | 
|  | debug2("connect %.100s port %u: %.100s", buf, | 
|  | 6000 + display_number, strerror(errno)); | 
|  | close(sock); | 
|  | continue; | 
|  | } | 
|  | /* Success */ | 
|  | break; | 
|  | } | 
|  | freeaddrinfo(aitop); | 
|  | if (!ai) { | 
|  | error("connect %.100s port %u: %.100s", buf, 6000 + display_number, | 
|  | strerror(errno)); | 
|  | return -1; | 
|  | } | 
|  | set_nodelay(sock); | 
|  | return sock; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This is called when SSH_SMSG_X11_OPEN is received.  The packet contains | 
|  | * the remote channel number.  We should do whatever we want, and respond | 
|  | * with either SSH_MSG_OPEN_CONFIRMATION or SSH_MSG_OPEN_FAILURE. | 
|  | */ | 
|  |  | 
|  | /* ARGSUSED */ | 
|  | void | 
|  | x11_input_open(int type, u_int32_t seq, void *ctxt) | 
|  | { | 
|  | Channel *c = NULL; | 
|  | int remote_id, sock = 0; | 
|  | char *remote_host; | 
|  |  | 
|  | debug("Received X11 open request."); | 
|  |  | 
|  | remote_id = packet_get_int(); | 
|  |  | 
|  | if (packet_get_protocol_flags() & SSH_PROTOFLAG_HOST_IN_FWD_OPEN) { | 
|  | remote_host = packet_get_string(NULL); | 
|  | } else { | 
|  | remote_host = xstrdup("unknown (remote did not supply name)"); | 
|  | } | 
|  | packet_check_eom(); | 
|  |  | 
|  | /* Obtain a connection to the real X display. */ | 
|  | sock = x11_connect_display(); | 
|  | if (sock != -1) { | 
|  | /* Allocate a channel for this connection. */ | 
|  | c = channel_new("connected x11 socket", | 
|  | SSH_CHANNEL_X11_OPEN, sock, sock, -1, 0, 0, 0, | 
|  | remote_host, 1); | 
|  | c->remote_id = remote_id; | 
|  | c->force_drain = 1; | 
|  | } | 
|  | free(remote_host); | 
|  | if (c == NULL) { | 
|  | /* Send refusal to the remote host. */ | 
|  | packet_start(SSH_MSG_CHANNEL_OPEN_FAILURE); | 
|  | packet_put_int(remote_id); | 
|  | } else { | 
|  | /* Send a confirmation to the remote host. */ | 
|  | packet_start(SSH_MSG_CHANNEL_OPEN_CONFIRMATION); | 
|  | packet_put_int(remote_id); | 
|  | packet_put_int(c->self); | 
|  | } | 
|  | packet_send(); | 
|  | } | 
|  |  | 
|  | /* dummy protocol handler that denies SSH-1 requests (agent/x11) */ | 
|  | /* ARGSUSED */ | 
|  | void | 
|  | deny_input_open(int type, u_int32_t seq, void *ctxt) | 
|  | { | 
|  | int rchan = packet_get_int(); | 
|  |  | 
|  | switch (type) { | 
|  | case SSH_SMSG_AGENT_OPEN: | 
|  | error("Warning: ssh server tried agent forwarding."); | 
|  | break; | 
|  | case SSH_SMSG_X11_OPEN: | 
|  | error("Warning: ssh server tried X11 forwarding."); | 
|  | break; | 
|  | default: | 
|  | error("deny_input_open: type %d", type); | 
|  | break; | 
|  | } | 
|  | error("Warning: this is probably a break-in attempt by a malicious server."); | 
|  | packet_start(SSH_MSG_CHANNEL_OPEN_FAILURE); | 
|  | packet_put_int(rchan); | 
|  | packet_send(); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Requests forwarding of X11 connections, generates fake authentication | 
|  | * data, and enables authentication spoofing. | 
|  | * This should be called in the client only. | 
|  | */ | 
|  | void | 
|  | x11_request_forwarding_with_spoofing(int client_session_id, const char *disp, | 
|  | const char *proto, const char *data, int want_reply) | 
|  | { | 
|  | u_int data_len = (u_int) strlen(data) / 2; | 
|  | u_int i, value; | 
|  | char *new_data; | 
|  | int screen_number; | 
|  | const char *cp; | 
|  | u_int32_t rnd = 0; | 
|  |  | 
|  | if (x11_saved_display == NULL) | 
|  | x11_saved_display = xstrdup(disp); | 
|  | else if (strcmp(disp, x11_saved_display) != 0) { | 
|  | error("x11_request_forwarding_with_spoofing: different " | 
|  | "$DISPLAY already forwarded"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | cp = strchr(disp, ':'); | 
|  | if (cp) | 
|  | cp = strchr(cp, '.'); | 
|  | if (cp) | 
|  | screen_number = (u_int)strtonum(cp + 1, 0, 400, NULL); | 
|  | else | 
|  | screen_number = 0; | 
|  |  | 
|  | if (x11_saved_proto == NULL) { | 
|  | /* Save protocol name. */ | 
|  | x11_saved_proto = xstrdup(proto); | 
|  | /* | 
|  | * Extract real authentication data and generate fake data | 
|  | * of the same length. | 
|  | */ | 
|  | x11_saved_data = xmalloc(data_len); | 
|  | x11_fake_data = xmalloc(data_len); | 
|  | for (i = 0; i < data_len; i++) { | 
|  | if (sscanf(data + 2 * i, "%2x", &value) != 1) | 
|  | fatal("x11_request_forwarding: bad " | 
|  | "authentication data: %.100s", data); | 
|  | if (i % 4 == 0) | 
|  | rnd = arc4random(); | 
|  | x11_saved_data[i] = value; | 
|  | x11_fake_data[i] = rnd & 0xff; | 
|  | rnd >>= 8; | 
|  | } | 
|  | x11_saved_data_len = data_len; | 
|  | x11_fake_data_len = data_len; | 
|  | } | 
|  |  | 
|  | /* Convert the fake data into hex. */ | 
|  | new_data = tohex(x11_fake_data, data_len); | 
|  |  | 
|  | /* Send the request packet. */ | 
|  | if (compat20) { | 
|  | channel_request_start(client_session_id, "x11-req", want_reply); | 
|  | packet_put_char(0);	/* XXX bool single connection */ | 
|  | } else { | 
|  | packet_start(SSH_CMSG_X11_REQUEST_FORWARDING); | 
|  | } | 
|  | packet_put_cstring(proto); | 
|  | packet_put_cstring(new_data); | 
|  | packet_put_int(screen_number); | 
|  | packet_send(); | 
|  | packet_write_wait(); | 
|  | free(new_data); | 
|  | } | 
|  |  | 
|  |  | 
|  | /* -- agent forwarding */ | 
|  |  | 
|  | /* Sends a message to the server to request authentication fd forwarding. */ | 
|  |  | 
|  | void | 
|  | auth_request_forwarding(void) | 
|  | { | 
|  | packet_start(SSH_CMSG_AGENT_REQUEST_FORWARDING); | 
|  | packet_send(); | 
|  | packet_write_wait(); | 
|  | } |