blob: 0132e47bdd03677f0969123a7fbde45c2deac7d4 [file] [log] [blame] [raw]
/*
* Copyright (c) 2000 Damien Miller. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "includes.h"
#ifdef USE_PAM
#include "ssh.h"
#include "xmalloc.h"
#include "log.h"
#include "auth-pam.h"
#include "servconf.h"
#include "canohost.h"
#include "readpass.h"
extern char *__progname;
RCSID("$Id: auth-pam.c,v 1.41 2001/11/09 20:22:17 stevesk Exp $");
#define NEW_AUTHTOK_MSG \
"Warning: Your password has expired, please change it now"
static int do_pam_conversation(int num_msg, const struct pam_message **msg,
struct pam_response **resp, void *appdata_ptr);
/* module-local variables */
static struct pam_conv conv = {
do_pam_conversation,
NULL
};
static char *__pam_msg = NULL;
static pam_handle_t *__pamh = NULL;
static const char *__pampasswd = NULL;
/* states for do_pam_conversation() */
enum { INITIAL_LOGIN, OTHER } pamstate = INITIAL_LOGIN;
/* remember whether pam_acct_mgmt() returned PAM_NEWAUTHTOK_REQD */
static int password_change_required = 0;
/* remember whether the last pam_authenticate() succeeded or not */
static int was_authenticated = 0;
/* Remember what has been initialised */
static int session_opened = 0;
static int creds_set = 0;
/* accessor which allows us to switch conversation structs according to
* the authentication method being used */
void do_pam_set_conv(struct pam_conv *conv)
{
pam_set_item(__pamh, PAM_CONV, conv);
}
/* start an authentication run */
int do_pam_authenticate(int flags)
{
int retval = pam_authenticate(__pamh, flags);
was_authenticated = (retval == PAM_SUCCESS);
return retval;
}
/*
* PAM conversation function.
* There are two states this can run in.
*
* INITIAL_LOGIN mode simply feeds the password from the client into
* PAM in response to PAM_PROMPT_ECHO_OFF, and collects output
* messages with into __pam_msg. This is used during initial
* authentication to bypass the normal PAM password prompt.
*
* OTHER mode handles PAM_PROMPT_ECHO_OFF with read_passphrase()
* and outputs messages to stderr. This mode is used if pam_chauthtok()
* is called to update expired passwords.
*/
static int do_pam_conversation(int num_msg, const struct pam_message **msg,
struct pam_response **resp, void *appdata_ptr)
{
struct pam_response *reply;
int count;
char buf[1024];
/* PAM will free this later */
reply = malloc(num_msg * sizeof(*reply));
if (reply == NULL)
return PAM_CONV_ERR;
for (count = 0; count < num_msg; count++) {
if (pamstate == INITIAL_LOGIN) {
/*
* We can't use stdio yet, queue messages for
* printing later
*/
switch(PAM_MSG_MEMBER(msg, count, msg_style)) {
case PAM_PROMPT_ECHO_ON:
free(reply);
return PAM_CONV_ERR;
case PAM_PROMPT_ECHO_OFF:
if (__pampasswd == NULL) {
free(reply);
return PAM_CONV_ERR;
}
reply[count].resp = xstrdup(__pampasswd);
reply[count].resp_retcode = PAM_SUCCESS;
break;
case PAM_ERROR_MSG:
case PAM_TEXT_INFO:
if ((*msg)[count].msg != NULL) {
message_cat(&__pam_msg,
PAM_MSG_MEMBER(msg, count, msg));
}
reply[count].resp = xstrdup("");
reply[count].resp_retcode = PAM_SUCCESS;
break;
default:
free(reply);
return PAM_CONV_ERR;
}
} else {
/*
* stdio is connected, so interact directly
*/
switch(PAM_MSG_MEMBER(msg, count, msg_style)) {
case PAM_PROMPT_ECHO_ON:
fputs(PAM_MSG_MEMBER(msg, count, msg), stderr);
fgets(buf, sizeof(buf), stdin);
reply[count].resp = xstrdup(buf);
reply[count].resp_retcode = PAM_SUCCESS;
break;
case PAM_PROMPT_ECHO_OFF:
reply[count].resp =
read_passphrase(PAM_MSG_MEMBER(msg, count,
msg), RP_ALLOW_STDIN);
reply[count].resp_retcode = PAM_SUCCESS;
break;
case PAM_ERROR_MSG:
case PAM_TEXT_INFO:
if ((*msg)[count].msg != NULL)
fprintf(stderr, "%s\n",
PAM_MSG_MEMBER(msg, count, msg));
reply[count].resp = xstrdup("");
reply[count].resp_retcode = PAM_SUCCESS;
break;
default:
free(reply);
return PAM_CONV_ERR;
}
}
}
*resp = reply;
return PAM_SUCCESS;
}
/* Called at exit to cleanly shutdown PAM */
void do_pam_cleanup_proc(void *context)
{
int pam_retval = PAM_SUCCESS;
if (__pamh && session_opened) {
pam_retval = pam_close_session(__pamh, 0);
if (pam_retval != PAM_SUCCESS)
log("Cannot close PAM session[%d]: %.200s",
pam_retval, PAM_STRERROR(__pamh, pam_retval));
}
if (__pamh && creds_set) {
pam_retval = pam_setcred(__pamh, PAM_DELETE_CRED);
if (pam_retval != PAM_SUCCESS)
debug("Cannot delete credentials[%d]: %.200s",
pam_retval, PAM_STRERROR(__pamh, pam_retval));
}
if (__pamh) {
pam_retval = pam_end(__pamh, pam_retval);
if (pam_retval != PAM_SUCCESS)
log("Cannot release PAM authentication[%d]: %.200s",
pam_retval, PAM_STRERROR(__pamh, pam_retval));
}
}
/* Attempt password authentation using PAM */
int auth_pam_password(struct passwd *pw, const char *password)
{
extern ServerOptions options;
int pam_retval;
do_pam_set_conv(&conv);
/* deny if no user. */
if (pw == NULL)
return 0;
if (pw->pw_uid == 0 && options.permit_root_login == PERMIT_NO_PASSWD)
return 0;
if (*password == '\0' && options.permit_empty_passwd == 0)
return 0;
__pampasswd = password;
pamstate = INITIAL_LOGIN;
pam_retval = do_pam_authenticate(
options.permit_empty_passwd == 0 ? PAM_DISALLOW_NULL_AUTHTOK : 0);
if (pam_retval == PAM_SUCCESS) {
debug("PAM Password authentication accepted for "
"user \"%.100s\"", pw->pw_name);
return 1;
} else {
debug("PAM Password authentication for \"%.100s\" "
"failed[%d]: %s", pw->pw_name, pam_retval,
PAM_STRERROR(__pamh, pam_retval));
return 0;
}
}
/* Do account management using PAM */
int do_pam_account(char *username, char *remote_user)
{
int pam_retval;
do_pam_set_conv(&conv);
if (remote_user) {
debug("PAM setting ruser to \"%.200s\"", remote_user);
pam_retval = pam_set_item(__pamh, PAM_RUSER, remote_user);
if (pam_retval != PAM_SUCCESS)
fatal("PAM set ruser failed[%d]: %.200s", pam_retval,
PAM_STRERROR(__pamh, pam_retval));
}
pam_retval = pam_acct_mgmt(__pamh, 0);
switch (pam_retval) {
case PAM_SUCCESS:
/* This is what we want */
break;
case PAM_NEW_AUTHTOK_REQD:
message_cat(&__pam_msg, NEW_AUTHTOK_MSG);
/* flag that password change is necessary */
password_change_required = 1;
break;
default:
log("PAM rejected by account configuration[%d]: "
"%.200s", pam_retval, PAM_STRERROR(__pamh,
pam_retval));
return(0);
}
return(1);
}
/* Do PAM-specific session initialisation */
void do_pam_session(char *username, const char *ttyname)
{
int pam_retval;
do_pam_set_conv(&conv);
if (ttyname != NULL) {
debug("PAM setting tty to \"%.200s\"", ttyname);
pam_retval = pam_set_item(__pamh, PAM_TTY, ttyname);
if (pam_retval != PAM_SUCCESS)
fatal("PAM set tty failed[%d]: %.200s",
pam_retval, PAM_STRERROR(__pamh, pam_retval));
}
pam_retval = pam_open_session(__pamh, 0);
if (pam_retval != PAM_SUCCESS)
fatal("PAM session setup failed[%d]: %.200s",
pam_retval, PAM_STRERROR(__pamh, pam_retval));
session_opened = 1;
}
/* Set PAM credentials */
void do_pam_setcred(int init)
{
int pam_retval;
do_pam_set_conv(&conv);
debug("PAM establishing creds");
pam_retval = pam_setcred(__pamh,
init ? PAM_ESTABLISH_CRED : PAM_REINITIALIZE_CRED);
if (pam_retval != PAM_SUCCESS) {
if (was_authenticated)
fatal("PAM setcred failed[%d]: %.200s",
pam_retval, PAM_STRERROR(__pamh, pam_retval));
else
debug("PAM setcred failed[%d]: %.200s",
pam_retval, PAM_STRERROR(__pamh, pam_retval));
} else
creds_set = 1;
}
/* accessor function for file scope static variable */
int is_pam_password_change_required(void)
{
return password_change_required;
}
/*
* Have user change authentication token if pam_acct_mgmt() indicated
* it was expired. This needs to be called after an interactive
* session is established and the user's pty is connected to
* stdin/stout/stderr.
*/
void do_pam_chauthtok(void)
{
int pam_retval;
do_pam_set_conv(&conv);
if (password_change_required) {
pamstate = OTHER;
pam_retval = pam_chauthtok(__pamh, PAM_CHANGE_EXPIRED_AUTHTOK);
if (pam_retval != PAM_SUCCESS)
fatal("PAM pam_chauthtok failed[%d]: %.200s",
pam_retval, PAM_STRERROR(__pamh, pam_retval));
}
}
/* Cleanly shutdown PAM */
void finish_pam(void)
{
do_pam_cleanup_proc(NULL);
fatal_remove_cleanup(&do_pam_cleanup_proc, NULL);
}
/* Start PAM authentication for specified account */
void start_pam(const char *user)
{
int pam_retval;
extern ServerOptions options;
extern u_int utmp_len;
const char *rhost;
debug("Starting up PAM with username \"%.200s\"", user);
pam_retval = pam_start(SSHD_PAM_SERVICE, user, &conv, &__pamh);
if (pam_retval != PAM_SUCCESS)
fatal("PAM initialisation failed[%d]: %.200s",
pam_retval, PAM_STRERROR(__pamh, pam_retval));
rhost = get_remote_name_or_ip(utmp_len, options.reverse_mapping_check);
debug("PAM setting rhost to \"%.200s\"", rhost);
pam_retval = pam_set_item(__pamh, PAM_RHOST, rhost);
if (pam_retval != PAM_SUCCESS)
fatal("PAM set rhost failed[%d]: %.200s", pam_retval,
PAM_STRERROR(__pamh, pam_retval));
#ifdef PAM_TTY_KLUDGE
/*
* Some PAM modules (e.g. pam_time) require a TTY to operate,
* and will fail in various stupid ways if they don't get one.
* sshd doesn't set the tty until too late in the auth process and may
* not even need one (for tty-less connections)
* Kludge: Set a fake PAM_TTY
*/
pam_retval = pam_set_item(__pamh, PAM_TTY, "NODEVssh");
if (pam_retval != PAM_SUCCESS)
fatal("PAM set tty failed[%d]: %.200s",
pam_retval, PAM_STRERROR(__pamh, pam_retval));
#endif /* PAM_TTY_KLUDGE */
fatal_add_cleanup(&do_pam_cleanup_proc, NULL);
}
/* Return list of PAM enviornment strings */
char **fetch_pam_environment(void)
{
#ifdef HAVE_PAM_GETENVLIST
return(pam_getenvlist(__pamh));
#else /* HAVE_PAM_GETENVLIST */
return(NULL);
#endif /* HAVE_PAM_GETENVLIST */
}
/* Print any messages that have been generated during authentication */
/* or account checking to stderr */
void print_pam_messages(void)
{
if (__pam_msg != NULL)
fputs(__pam_msg, stderr);
}
/* Append a message to buffer */
void message_cat(char **p, const char *a)
{
char *cp;
size_t new_len;
new_len = strlen(a);
if (*p) {
size_t len = strlen(*p);
*p = xrealloc(*p, new_len + len + 2);
cp = *p + len;
} else
*p = cp = xmalloc(new_len + 2);
memcpy(cp, a, new_len);
cp[new_len] = '\n';
cp[new_len + 1] = '\0';
}
#endif /* USE_PAM */