| SFTP(1) General Commands Manual SFTP(1) |
| |
| NAME |
| sftp M-bM-^@M-^S secure file transfer program |
| |
| SYNOPSIS |
| sftp [-1246aCfpqrv] [-B buffer_size] [-b batchfile] [-c cipher] |
| [-D sftp_server_path] [-F ssh_config] [-i identity_file] [-l limit] |
| [-o ssh_option] [-P port] [-R num_requests] [-S program] |
| [-s subsystem | sftp_server] host |
| sftp [user@]host[:file ...] |
| sftp [user@]host[:dir[/]] |
| sftp -b batchfile [user@]host |
| |
| DESCRIPTION |
| sftp is an interactive file transfer program, similar to ftp(1), which |
| performs all operations over an encrypted ssh(1) transport. It may also |
| use many features of ssh, such as public key authentication and |
| compression. sftp connects and logs into the specified host, then enters |
| an interactive command mode. |
| |
| The second usage format will retrieve files automatically if a non- |
| interactive authentication method is used; otherwise it will do so after |
| successful interactive authentication. |
| |
| The third usage format allows sftp to start in a remote directory. |
| |
| The final usage format allows for automated sessions using the -b option. |
| In such cases, it is necessary to configure non-interactive |
| authentication to obviate the need to enter a password at connection time |
| (see sshd(8) and ssh-keygen(1) for details). |
| |
| Since some usage formats use colon characters to delimit host names from |
| path names, IPv6 addresses must be enclosed in square brackets to avoid |
| ambiguity. |
| |
| The options are as follows: |
| |
| -1 Specify the use of protocol version 1. |
| |
| -2 Specify the use of protocol version 2. |
| |
| -4 Forces sftp to use IPv4 addresses only. |
| |
| -6 Forces sftp to use IPv6 addresses only. |
| |
| -a Attempt to continue interrupted transfers rather than overwriting |
| existing partial or complete copies of files. If the partial |
| contents differ from those being transferred, then the resultant |
| file is likely to be corrupt. |
| |
| -B buffer_size |
| Specify the size of the buffer that sftp uses when transferring |
| files. Larger buffers require fewer round trips at the cost of |
| higher memory consumption. The default is 32768 bytes. |
| |
| -b batchfile |
| Batch mode reads a series of commands from an input batchfile |
| instead of stdin. Since it lacks user interaction it should be |
| used in conjunction with non-interactive authentication. A |
| batchfile of M-bM-^@M-^X-M-bM-^@M-^Y may be used to indicate standard input. sftp |
| will abort if any of the following commands fail: get, put, |
| reget, reput, rename, ln, rm, mkdir, chdir, ls, lchdir, chmod, |
| chown, chgrp, lpwd, df, symlink, and lmkdir. Termination on |
| error can be suppressed on a command by command basis by |
| prefixing the command with a M-bM-^@M-^X-M-bM-^@M-^Y character (for example, -rm |
| /tmp/blah*). |
| |
| -C Enables compression (via ssh's -C flag). |
| |
| -c cipher |
| Selects the cipher to use for encrypting the data transfers. |
| This option is directly passed to ssh(1). |
| |
| -D sftp_server_path |
| Connect directly to a local sftp server (rather than via ssh(1)). |
| This option may be useful in debugging the client and server. |
| |
| -F ssh_config |
| Specifies an alternative per-user configuration file for ssh(1). |
| This option is directly passed to ssh(1). |
| |
| -f Requests that files be flushed to disk immediately after |
| transfer. When uploading files, this feature is only enabled if |
| the server implements the "fsync@openssh.com" extension. |
| |
| -i identity_file |
| Selects the file from which the identity (private key) for public |
| key authentication is read. This option is directly passed to |
| ssh(1). |
| |
| -l limit |
| Limits the used bandwidth, specified in Kbit/s. |
| |
| -o ssh_option |
| Can be used to pass options to ssh in the format used in |
| ssh_config(5). This is useful for specifying options for which |
| there is no separate sftp command-line flag. For example, to |
| specify an alternate port use: sftp -oPort=24. For full details |
| of the options listed below, and their possible values, see |
| ssh_config(5). |
| |
| AddressFamily |
| BatchMode |
| BindAddress |
| CanonicalDomains |
| CanonicalizeFallbackLocal |
| CanonicalizeHostname |
| CanonicalizeMaxDots |
| CanonicalizePermittedCNAMEs |
| ChallengeResponseAuthentication |
| CheckHostIP |
| Cipher |
| Ciphers |
| Compression |
| CompressionLevel |
| ConnectionAttempts |
| ConnectTimeout |
| ControlMaster |
| ControlPath |
| ControlPersist |
| GlobalKnownHostsFile |
| GSSAPIAuthentication |
| GSSAPIDelegateCredentials |
| HashKnownHosts |
| Host |
| HostbasedAuthentication |
| HostbasedKeyTypes |
| HostKeyAlgorithms |
| HostKeyAlias |
| HostName |
| IdentityFile |
| IdentitiesOnly |
| IPQoS |
| KbdInteractiveAuthentication |
| KbdInteractiveDevices |
| KexAlgorithms |
| LogLevel |
| MACs |
| NoHostAuthenticationForLocalhost |
| NumberOfPasswordPrompts |
| PasswordAuthentication |
| PKCS11Provider |
| Port |
| PreferredAuthentications |
| Protocol |
| ProxyCommand |
| PubkeyAuthentication |
| RekeyLimit |
| RhostsRSAAuthentication |
| RSAAuthentication |
| SendEnv |
| ServerAliveInterval |
| ServerAliveCountMax |
| StrictHostKeyChecking |
| TCPKeepAlive |
| UpdateHostKeys |
| UsePrivilegedPort |
| User |
| UserKnownHostsFile |
| VerifyHostKeyDNS |
| |
| -P port |
| Specifies the port to connect to on the remote host. |
| |
| -p Preserves modification times, access times, and modes from the |
| original files transferred. |
| |
| -q Quiet mode: disables the progress meter as well as warning and |
| diagnostic messages from ssh(1). |
| |
| -R num_requests |
| Specify how many requests may be outstanding at any one time. |
| Increasing this may slightly improve file transfer speed but will |
| increase memory usage. The default is 64 outstanding requests. |
| |
| -r Recursively copy entire directories when uploading and |
| downloading. Note that sftp does not follow symbolic links |
| encountered in the tree traversal. |
| |
| -S program |
| Name of the program to use for the encrypted connection. The |
| program must understand ssh(1) options. |
| |
| -s subsystem | sftp_server |
| Specifies the SSH2 subsystem or the path for an sftp server on |
| the remote host. A path is useful for using sftp over protocol |
| version 1, or when the remote sshd(8) does not have an sftp |
| subsystem configured. |
| |
| -v Raise logging level. This option is also passed to ssh. |
| |
| INTERACTIVE COMMANDS |
| Once in interactive mode, sftp understands a set of commands similar to |
| those of ftp(1). Commands are case insensitive. Pathnames that contain |
| spaces must be enclosed in quotes. Any special characters contained |
| within pathnames that are recognized by glob(3) must be escaped with |
| backslashes (M-bM-^@M-^X\M-bM-^@M-^Y). |
| |
| bye Quit sftp. |
| |
| cd path |
| Change remote directory to path. |
| |
| chgrp grp path |
| Change group of file path to grp. path may contain glob(3) |
| characters and may match multiple files. grp must be a numeric |
| GID. |
| |
| chmod mode path |
| Change permissions of file path to mode. path may contain |
| glob(3) characters and may match multiple files. |
| |
| chown own path |
| Change owner of file path to own. path may contain glob(3) |
| characters and may match multiple files. own must be a numeric |
| UID. |
| |
| df [-hi] [path] |
| Display usage information for the filesystem holding the current |
| directory (or path if specified). If the -h flag is specified, |
| the capacity information will be displayed using "human-readable" |
| suffixes. The -i flag requests display of inode information in |
| addition to capacity information. This command is only supported |
| on servers that implement the M-bM-^@M-^\statvfs@openssh.comM-bM-^@M-^] extension. |
| |
| exit Quit sftp. |
| |
| get [-afPpr] remote-path [local-path] |
| Retrieve the remote-path and store it on the local machine. If |
| the local path name is not specified, it is given the same name |
| it has on the remote machine. remote-path may contain glob(3) |
| characters and may match multiple files. If it does and |
| local-path is specified, then local-path must specify a |
| directory. |
| |
| If the -a flag is specified, then attempt to resume partial |
| transfers of existing files. Note that resumption assumes that |
| any partial copy of the local file matches the remote copy. If |
| the remote file contents differ from the partial local copy then |
| the resultant file is likely to be corrupt. |
| |
| If the -f flag is specified, then fsync(2) will be called after |
| the file transfer has completed to flush the file to disk. |
| |
| If either the -P or -p flag is specified, then full file |
| permissions and access times are copied too. |
| |
| If the -r flag is specified then directories will be copied |
| recursively. Note that sftp does not follow symbolic links when |
| performing recursive transfers. |
| |
| help Display help text. |
| |
| lcd path |
| Change local directory to path. |
| |
| lls [ls-options [path]] |
| Display local directory listing of either path or current |
| directory if path is not specified. ls-options may contain any |
| flags supported by the local system's ls(1) command. path may |
| contain glob(3) characters and may match multiple files. |
| |
| lmkdir path |
| Create local directory specified by path. |
| |
| ln [-s] oldpath newpath |
| Create a link from oldpath to newpath. If the -s flag is |
| specified the created link is a symbolic link, otherwise it is a |
| hard link. |
| |
| lpwd Print local working directory. |
| |
| ls [-1afhlnrSt] [path] |
| Display a remote directory listing of either path or the current |
| directory if path is not specified. path may contain glob(3) |
| characters and may match multiple files. |
| |
| The following flags are recognized and alter the behaviour of ls |
| accordingly: |
| |
| -1 Produce single columnar output. |
| |
| -a List files beginning with a dot (M-bM-^@M-^X.M-bM-^@M-^Y). |
| |
| -f Do not sort the listing. The default sort order is |
| lexicographical. |
| |
| -h When used with a long format option, use unit suffixes: |
| Byte, Kilobyte, Megabyte, Gigabyte, Terabyte, Petabyte, |
| and Exabyte in order to reduce the number of digits to |
| four or fewer using powers of 2 for sizes (K=1024, |
| M=1048576, etc.). |
| |
| -l Display additional details including permissions and |
| ownership information. |
| |
| -n Produce a long listing with user and group information |
| presented numerically. |
| |
| -r Reverse the sort order of the listing. |
| |
| -S Sort the listing by file size. |
| |
| -t Sort the listing by last modification time. |
| |
| lumask umask |
| Set local umask to umask. |
| |
| mkdir path |
| Create remote directory specified by path. |
| |
| progress |
| Toggle display of progress meter. |
| |
| put [-afPpr] local-path [remote-path] |
| Upload local-path and store it on the remote machine. If the |
| remote path name is not specified, it is given the same name it |
| has on the local machine. local-path may contain glob(3) |
| characters and may match multiple files. If it does and |
| remote-path is specified, then remote-path must specify a |
| directory. |
| |
| If the -a flag is specified, then attempt to resume partial |
| transfers of existing files. Note that resumption assumes that |
| any partial copy of the remote file matches the local copy. If |
| the local file contents differ from the remote local copy then |
| the resultant file is likely to be corrupt. |
| |
| If the -f flag is specified, then a request will be sent to the |
| server to call fsync(2) after the file has been transferred. |
| Note that this is only supported by servers that implement the |
| "fsync@openssh.com" extension. |
| |
| If either the -P or -p flag is specified, then full file |
| permissions and access times are copied too. |
| |
| If the -r flag is specified then directories will be copied |
| recursively. Note that sftp does not follow symbolic links when |
| performing recursive transfers. |
| |
| pwd Display remote working directory. |
| |
| quit Quit sftp. |
| |
| reget [-Ppr] remote-path [local-path] |
| Resume download of remote-path. Equivalent to get with the -a |
| flag set. |
| |
| reput [-Ppr] [local-path] remote-path |
| Resume upload of [local-path]. Equivalent to put with the -a |
| flag set. |
| |
| rename oldpath newpath |
| Rename remote file from oldpath to newpath. |
| |
| rm path |
| Delete remote file specified by path. |
| |
| rmdir path |
| Remove remote directory specified by path. |
| |
| symlink oldpath newpath |
| Create a symbolic link from oldpath to newpath. |
| |
| version |
| Display the sftp protocol version. |
| |
| !command |
| Execute command in local shell. |
| |
| ! Escape to local shell. |
| |
| ? Synonym for help. |
| |
| SEE ALSO |
| ftp(1), ls(1), scp(1), ssh(1), ssh-add(1), ssh-keygen(1), glob(3), |
| ssh_config(5), sftp-server(8), sshd(8) |
| |
| T. Ylonen and S. Lehtinen, SSH File Transfer Protocol, draft-ietf-secsh- |
| filexfer-00.txt, January 2001, work in progress material. |
| |
| OpenBSD 5.7 January 30, 2015 OpenBSD 5.7 |