blob: 65caf2ff852b3f20bac38ba2f4d64e469701d8e2 [file] [log] [blame] [raw]
/*
* Author: Tatu Ylonen <ylo@cs.hut.fi>
* Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
* All rights reserved
* Encoding and decoding of terminal modes in a portable way.
* Much of the format is defined in ttymodes.h; it is included multiple times
* into this file with the appropriate macro definitions to generate the
* suitable code.
*
* As far as I am concerned, the code I have written for this software
* can be used freely for any purpose. Any derived versions of this
* software must be clearly marked as such, and if the derived work is
* incompatible with the protocol description in the RFC file, it must be
* called by a name other than "ssh" or "Secure Shell".
*/
#include "includes.h"
RCSID("$OpenBSD: ttymodes.c,v 1.11 2001/03/10 15:02:05 stevesk Exp $");
#include "packet.h"
#include "log.h"
#include "ssh1.h"
#define TTY_OP_END 0
#define TTY_OP_ISPEED 192 /* int follows */
#define TTY_OP_OSPEED 193 /* int follows */
/*
* Converts POSIX speed_t to a baud rate. The values of the
* constants for speed_t are not themselves portable.
*/
static int
speed_to_baud(speed_t speed)
{
switch (speed) {
case B0:
return 0;
case B50:
return 50;
case B75:
return 75;
case B110:
return 110;
case B134:
return 134;
case B150:
return 150;
case B200:
return 200;
case B300:
return 300;
case B600:
return 600;
case B1200:
return 1200;
case B1800:
return 1800;
case B2400:
return 2400;
case B4800:
return 4800;
case B9600:
return 9600;
#ifdef B19200
case B19200:
return 19200;
#else /* B19200 */
#ifdef EXTA
case EXTA:
return 19200;
#endif /* EXTA */
#endif /* B19200 */
#ifdef B38400
case B38400:
return 38400;
#else /* B38400 */
#ifdef EXTB
case EXTB:
return 38400;
#endif /* EXTB */
#endif /* B38400 */
#ifdef B7200
case B7200:
return 7200;
#endif /* B7200 */
#ifdef B14400
case B14400:
return 14400;
#endif /* B14400 */
#ifdef B28800
case B28800:
return 28800;
#endif /* B28800 */
#ifdef B57600
case B57600:
return 57600;
#endif /* B57600 */
#ifdef B76800
case B76800:
return 76800;
#endif /* B76800 */
#ifdef B115200
case B115200:
return 115200;
#endif /* B115200 */
#ifdef B230400
case B230400:
return 230400;
#endif /* B230400 */
default:
return 9600;
}
}
/*
* Converts a numeric baud rate to a POSIX speed_t.
*/
static speed_t
baud_to_speed(int baud)
{
switch (baud) {
case 0:
return B0;
case 50:
return B50;
case 75:
return B75;
case 110:
return B110;
case 134:
return B134;
case 150:
return B150;
case 200:
return B200;
case 300:
return B300;
case 600:
return B600;
case 1200:
return B1200;
case 1800:
return B1800;
case 2400:
return B2400;
case 4800:
return B4800;
case 9600:
return B9600;
#ifdef B19200
case 19200:
return B19200;
#else /* B19200 */
#ifdef EXTA
case 19200:
return EXTA;
#endif /* EXTA */
#endif /* B19200 */
#ifdef B38400
case 38400:
return B38400;
#else /* B38400 */
#ifdef EXTB
case 38400:
return EXTB;
#endif /* EXTB */
#endif /* B38400 */
#ifdef B7200
case 7200:
return B7200;
#endif /* B7200 */
#ifdef B14400
case 14400:
return B14400;
#endif /* B14400 */
#ifdef B28800
case 28800:
return B28800;
#endif /* B28800 */
#ifdef B57600
case 57600:
return B57600;
#endif /* B57600 */
#ifdef B76800
case 76800:
return B76800;
#endif /* B76800 */
#ifdef B115200
case 115200:
return B115200;
#endif /* B115200 */
#ifdef B230400
case 230400:
return B230400;
#endif /* B230400 */
default:
return B9600;
}
}
/*
* Encodes terminal modes for the terminal referenced by fd
* in a portable manner, and appends the modes to a packet
* being constructed.
*/
void
tty_make_modes(int fd)
{
struct termios tio;
int baud;
if (tcgetattr(fd, &tio) < 0) {
packet_put_char(TTY_OP_END);
log("tcgetattr: %.100s", strerror(errno));
return;
}
/* Store input and output baud rates. */
baud = speed_to_baud(cfgetospeed(&tio));
packet_put_char(TTY_OP_OSPEED);
packet_put_int(baud);
baud = speed_to_baud(cfgetispeed(&tio));
packet_put_char(TTY_OP_ISPEED);
packet_put_int(baud);
/* Store values of mode flags. */
#define TTYCHAR(NAME, OP) \
packet_put_char(OP); packet_put_char(tio.c_cc[NAME]);
#define TTYMODE(NAME, FIELD, OP) \
packet_put_char(OP); packet_put_char((tio.FIELD & NAME) != 0);
#include "ttymodes.h"
#undef TTYCHAR
#undef TTYMODE
/* Mark end of mode data. */
packet_put_char(TTY_OP_END);
}
/*
* Decodes terminal modes for the terminal referenced by fd in a portable
* manner from a packet being read.
*/
void
tty_parse_modes(int fd, int *n_bytes_ptr)
{
struct termios tio;
int opcode, baud;
int n_bytes = 0;
int failure = 0;
/*
* Get old attributes for the terminal. We will modify these
* flags. I am hoping that if there are any machine-specific
* modes, they will initially have reasonable values.
*/
if (tcgetattr(fd, &tio) < 0)
failure = -1;
for (;;) {
n_bytes += 1;
opcode = packet_get_char();
switch (opcode) {
case TTY_OP_END:
goto set;
case TTY_OP_ISPEED:
n_bytes += 4;
baud = packet_get_int();
if (failure != -1 && cfsetispeed(&tio, baud_to_speed(baud)) < 0)
error("cfsetispeed failed for %d", baud);
break;
case TTY_OP_OSPEED:
n_bytes += 4;
baud = packet_get_int();
if (failure != -1 && cfsetospeed(&tio, baud_to_speed(baud)) < 0)
error("cfsetospeed failed for %d", baud);
break;
#define TTYCHAR(NAME, OP) \
case OP: \
n_bytes += 1; \
tio.c_cc[NAME] = packet_get_char(); \
break;
#define TTYMODE(NAME, FIELD, OP) \
case OP: \
n_bytes += 1; \
if (packet_get_char()) \
tio.FIELD |= NAME; \
else \
tio.FIELD &= ~NAME; \
break;
#include "ttymodes.h"
#undef TTYCHAR
#undef TTYMODE
default:
debug("Ignoring unsupported tty mode opcode %d (0x%x)",
opcode, opcode);
/*
* Opcodes 0 to 127 are defined to have
* a one-byte argument.
*/
if (opcode >= 0 && opcode < 128) {
n_bytes += 1;
(void) packet_get_char();
break;
} else {
/*
* Opcodes 128 to 159 are defined to have
* an integer argument.
*/
if (opcode >= 128 && opcode < 160) {
n_bytes += 4;
(void) packet_get_int();
break;
}
}
/*
* It is a truly undefined opcode (160 to 255).
* We have no idea about its arguments. So we
* must stop parsing. Note that some data may be
* left in the packet; hopefully there is nothing
* more coming after the mode data.
*/
log("parse_tty_modes: unknown opcode %d", opcode);
packet_integrity_check(0, 1, SSH_CMSG_REQUEST_PTY);
goto set;
}
}
set:
if (*n_bytes_ptr != n_bytes) {
*n_bytes_ptr = n_bytes;
return; /* Don't process bytes passed */
}
if (failure == -1)
return; /* Packet parsed ok but tty stuff failed */
/* Set the new modes for the terminal. */
if (tcsetattr(fd, TCSANOW, &tio) < 0)
log("Setting tty modes failed: %.100s", strerror(errno));
return;
}