blob: 6d7bd86c05df93ff368fd98b21616ffe03515f34 [file] [log] [blame] [raw]
/**
* \file config.h
*
* \brief Configuration options (set of defines)
*
* Copyright (C) 2006-2014, Brainspark B.V.
*
* This file is part of PolarSSL (http://www.polarssl.org)
* Lead Maintainer: Paul Bakker <polarssl_maintainer at polarssl.org>
*
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This set of compile-time options may be used to enable
* or disable features selectively, and reduce the global
* memory footprint.
*/
#ifndef POLARSSL_CONFIG_H
#define POLARSSL_CONFIG_H
#if defined(_MSC_VER) && !defined(_CRT_SECURE_NO_DEPRECATE)
#define _CRT_SECURE_NO_DEPRECATE 1
#endif
/**
* \name SECTION: System support
*
* This section sets system specific settings.
* \{
*/
/**
* \def POLARSSL_HAVE_INT8
*
* The system uses 8-bit wide native integers.
*
* Uncomment if native integers are 8-bit wide.
*/
//#define POLARSSL_HAVE_INT8
/**
* \def POLARSSL_HAVE_INT16
*
* The system uses 16-bit wide native integers.
*
* Uncomment if native integers are 16-bit wide.
*/
//#define POLARSSL_HAVE_INT16
/**
* \def POLARSSL_HAVE_LONGLONG
*
* The compiler supports the 'long long' type.
* (Only used on 32-bit platforms)
*/
#define POLARSSL_HAVE_LONGLONG
/**
* \def POLARSSL_HAVE_ASM
*
* The compiler has support for asm().
*
* Requires support for asm() in compiler.
*
* Used in:
* library/timing.c
* library/padlock.c
* include/polarssl/bn_mul.h
*
* Comment to disable the use of assembly code.
*/
#define POLARSSL_HAVE_ASM
/**
* \def POLARSSL_HAVE_SSE2
*
* CPU supports SSE2 instruction set.
*
* Uncomment if the CPU supports SSE2 (IA-32 specific).
*/
//#define POLARSSL_HAVE_SSE2
/**
* \def POLARSSL_HAVE_TIME
*
* System has time.h and time() / localtime() / gettimeofday().
*
* Comment if your system does not support time functions
*/
#define POLARSSL_HAVE_TIME
/**
* \def POLARSSL_HAVE_IPV6
*
* System supports the basic socket interface for IPv6 (RFC 3493),
* specifically getaddrinfo(), freeaddrinfo() and struct sockaddr_storage.
*
* Note: on Windows/MingW, XP or higher is required.
*
* Comment if your system does not support the IPv6 socket interface
*/
#define POLARSSL_HAVE_IPV6
/**
* \def POLARSSL_PLATFORM_MEMORY
*
* Enable the memory allocation layer.
*
* By default PolarSSL uses the system-provided malloc() and free().
* This allows different allocators (self-implemented or provided) to be
* provided to the platform abstraction layer.
*
* Enabling POLARSSL_PLATFORM_MEMORY will provide "platform_set_malloc_free()"
* to allow you to set an alternative malloc() and free() function pointer.
*
* Requires: POLARSSL_PLATFORM_C
*
* Enable this layer to allow use of alternative memory allocators.
*/
//#define POLARSSL_PLATFORM_MEMORY
/**
* \def POLARSSL_PLATFORM_XXX_ALT
*
* Uncomment a macro to let PolarSSL support the function in the platform
* abstraction layer.
*
* Example: In case you uncomment POLARSSL_PLATFORM_PRINTF_ALT, PolarSSL will
* provide a function "platform_set_printf()" that allows you to set an
* alternative printf function pointer.
*
* All these define require POLARSSL_PLATFORM_C to be defined!
*
* Uncomment a macro to enable alternate implementation of specific base
* platform function
*/
//#define POLARSSL_PLATFORM_PRINTF_ALT
//#define POLARSSL_PLATFORM_FPRINTF_ALT
/* \} name SECTION: System support */
/**
* \name SECTION: PolarSSL feature support
*
* This section sets support for features that are or are not needed
* within the modules that are enabled.
* \{
*/
/**
* \def POLARSSL_TIMING_ALT
*
* Uncomment to provide your own alternate implementation for hardclock(),
* get_timer(), set_alarm() and m_sleep().
*
* Only works if you have POLARSSL_TIMING_C enabled.
*
* You will need to provide a header "timing_alt.h" and an implementation at
* compile time.
*/
//#define POLARSSL_TIMING_ALT
/**
* \def POLARSSL_XXX_ALT
*
* Uncomment a macro to let PolarSSL use your alternate core implementation of
* a symmetric or hash algorithm (e.g. platform specific assembly optimized
* implementations). Keep in mind that the function prototypes should remain
* the same.
*
* Example: In case you uncomment POLARSSL_AES_ALT, PolarSSL will no longer
* provide the "struct aes_context" definition and omit the base function
* declarations and implementations. "aes_alt.h" will be included from
* "aes.h" to include the new function definitions.
*
* Uncomment a macro to enable alternate implementation for core algorithm
* functions
*/
//#define POLARSSL_AES_ALT
//#define POLARSSL_ARC4_ALT
//#define POLARSSL_BLOWFISH_ALT
//#define POLARSSL_CAMELLIA_ALT
//#define POLARSSL_DES_ALT
//#define POLARSSL_XTEA_ALT
//#define POLARSSL_MD2_ALT
//#define POLARSSL_MD4_ALT
//#define POLARSSL_MD5_ALT
//#define POLARSSL_RIPEMD160_ALT
//#define POLARSSL_SHA1_ALT
//#define POLARSSL_SHA256_ALT
//#define POLARSSL_SHA512_ALT
/**
* \def POLARSSL_AES_ROM_TABLES
*
* Store the AES tables in ROM.
*
* Uncomment this macro to store the AES tables in ROM.
*
*/
//#define POLARSSL_AES_ROM_TABLES
/**
* \def POLARSSL_CIPHER_MODE_CBC
*
* Enable Cipher Block Chaining mode (CBC) for symmetric ciphers.
*/
#define POLARSSL_CIPHER_MODE_CBC
/**
* \def POLARSSL_CIPHER_MODE_CFB
*
* Enable Cipher Feedback mode (CFB) for symmetric ciphers.
*/
#define POLARSSL_CIPHER_MODE_CFB
/**
* \def POLARSSL_CIPHER_MODE_CTR
*
* Enable Counter Block Cipher mode (CTR) for symmetric ciphers.
*/
#define POLARSSL_CIPHER_MODE_CTR
/**
* \def POLARSSL_CIPHER_NULL_CIPHER
*
* Enable NULL cipher.
* Warning: Only do so when you know what you are doing. This allows for
* encryption or channels without any security!
*
* Requires POLARSSL_ENABLE_WEAK_CIPHERSUITES as well to enable
* the following ciphersuites:
* TLS_ECDH_ECDSA_WITH_NULL_SHA
* TLS_ECDH_RSA_WITH_NULL_SHA
* TLS_ECDHE_ECDSA_WITH_NULL_SHA
* TLS_ECDHE_RSA_WITH_NULL_SHA
* TLS_ECDHE_PSK_WITH_NULL_SHA384
* TLS_ECDHE_PSK_WITH_NULL_SHA256
* TLS_ECDHE_PSK_WITH_NULL_SHA
* TLS_DHE_PSK_WITH_NULL_SHA384
* TLS_DHE_PSK_WITH_NULL_SHA256
* TLS_DHE_PSK_WITH_NULL_SHA
* TLS_RSA_WITH_NULL_SHA256
* TLS_RSA_WITH_NULL_SHA
* TLS_RSA_WITH_NULL_MD5
* TLS_RSA_PSK_WITH_NULL_SHA384
* TLS_RSA_PSK_WITH_NULL_SHA256
* TLS_RSA_PSK_WITH_NULL_SHA
* TLS_PSK_WITH_NULL_SHA384
* TLS_PSK_WITH_NULL_SHA256
* TLS_PSK_WITH_NULL_SHA
*
* Uncomment this macro to enable the NULL cipher and ciphersuites
#define POLARSSL_CIPHER_NULL_CIPHER
*/
/**
* \def POLARSSL_CIPHER_PADDING_XXX
*
* Uncomment or comment macros to add support for specific padding modes
* in the cipher layer with cipher modes that support padding (e.g. CBC)
*
* If you disable all padding modes, only full blocks can be used with CBC.
*
* Enable padding modes in the cipher layer.
*/
#define POLARSSL_CIPHER_PADDING_PKCS7
#define POLARSSL_CIPHER_PADDING_ONE_AND_ZEROS
#define POLARSSL_CIPHER_PADDING_ZEROS_AND_LEN
#define POLARSSL_CIPHER_PADDING_ZEROS
/**
* \def POLARSSL_ENABLE_WEAK_CIPHERSUITES
*
* Enable weak ciphersuites in SSL / TLS.
* Warning: Only do so when you know what you are doing. This allows for
* channels with virtually no security at all!
*
* This enables the following ciphersuites:
* TLS_RSA_WITH_DES_CBC_SHA
* TLS_DHE_RSA_WITH_DES_CBC_SHA
*
* Uncomment this macro to enable weak ciphersuites
#define POLARSSL_ENABLE_WEAK_CIPHERSUITES
*/
/**
* \def POLARSSL_ECP_XXXX_ENABLED
*
* Enables specific curves within the Elliptic Curve module.
* By default all supported curves are enabled.
*
* Comment macros to disable the curve and functions for it
*/
#define POLARSSL_ECP_DP_SECP192R1_ENABLED
#define POLARSSL_ECP_DP_SECP224R1_ENABLED
#define POLARSSL_ECP_DP_SECP256R1_ENABLED
#define POLARSSL_ECP_DP_SECP384R1_ENABLED
#define POLARSSL_ECP_DP_SECP521R1_ENABLED
#define POLARSSL_ECP_DP_SECP192K1_ENABLED
#define POLARSSL_ECP_DP_SECP224K1_ENABLED
#define POLARSSL_ECP_DP_SECP256K1_ENABLED
#define POLARSSL_ECP_DP_BP256R1_ENABLED
#define POLARSSL_ECP_DP_BP384R1_ENABLED
#define POLARSSL_ECP_DP_BP512R1_ENABLED
//#define POLARSSL_ECP_DP_M221_ENABLED // Not implemented yet!
#define POLARSSL_ECP_DP_M255_ENABLED
//#define POLARSSL_ECP_DP_M383_ENABLED // Not implemented yet!
//#define POLARSSL_ECP_DP_M511_ENABLED // Not implemented yet!
/**
* \def POLARSSL_ECP_NIST_OPTIM
*
* Enable specific 'modulo p' routines for each NIST prime.
* Depending on the prime and architecture, makes operations 4 to 8 times
* faster on the corresponding curve.
*
* Comment this macro to disable NIST curves optimisation.
*/
#define POLARSSL_ECP_NIST_OPTIM
/**
* \def POLARSSL_ECDSA_DETERMINISTIC
*
* Enable deterministic ECDSA (RFC 6979).
* Standard ECDSA is "fragile" in the sense that lack of entropy when signing
* may result in a compromise of the long-term signing key. This is avoided by
* the deterministic variant.
*
* Requires: POLARSSL_HMAC_DRBG_C
*
* Comment this macro to disable deterministic ECDSA.
*/
#define POLARSSL_ECDSA_DETERMINISTIC
/**
* \def POLARSSL_KEY_EXCHANGE_PSK_ENABLED
*
* Enable the PSK based ciphersuite modes in SSL / TLS.
*
* This enables the following ciphersuites (if other requisites are
* enabled as well):
* TLS_PSK_WITH_AES_256_GCM_SHA384
* TLS_PSK_WITH_AES_256_CBC_SHA384
* TLS_PSK_WITH_AES_256_CBC_SHA
* TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384
* TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384
* TLS_PSK_WITH_AES_128_GCM_SHA256
* TLS_PSK_WITH_AES_128_CBC_SHA256
* TLS_PSK_WITH_AES_128_CBC_SHA
* TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256
* TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256
* TLS_PSK_WITH_3DES_EDE_CBC_SHA
* TLS_PSK_WITH_RC4_128_SHA
*/
#define POLARSSL_KEY_EXCHANGE_PSK_ENABLED
/**
* \def POLARSSL_KEY_EXCHANGE_DHE_PSK_ENABLED
*
* Enable the DHE-PSK based ciphersuite modes in SSL / TLS.
*
* Requires: POLARSSL_DHM_C
*
* This enables the following ciphersuites (if other requisites are
* enabled as well):
* TLS_DHE_PSK_WITH_AES_256_GCM_SHA384
* TLS_DHE_PSK_WITH_AES_256_CBC_SHA384
* TLS_DHE_PSK_WITH_AES_256_CBC_SHA
* TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384
* TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
* TLS_DHE_PSK_WITH_AES_128_GCM_SHA256
* TLS_DHE_PSK_WITH_AES_128_CBC_SHA256
* TLS_DHE_PSK_WITH_AES_128_CBC_SHA
* TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256
* TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
* TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA
* TLS_DHE_PSK_WITH_RC4_128_SHA
*/
#define POLARSSL_KEY_EXCHANGE_DHE_PSK_ENABLED
/**
* \def POLARSSL_KEY_EXCHANGE_ECDHE_PSK_ENABLED
*
* Enable the ECDHE-PSK based ciphersuite modes in SSL / TLS.
*
* Requires: POLARSSL_ECDH_C
*
* This enables the following ciphersuites (if other requisites are
* enabled as well):
* TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384
* TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA
* TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
* TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256
* TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA
* TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
* TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA
* TLS_ECDHE_PSK_WITH_RC4_128_SHA
*/
#define POLARSSL_KEY_EXCHANGE_ECDHE_PSK_ENABLED
/**
* \def POLARSSL_KEY_EXCHANGE_RSA_PSK_ENABLED
*
* Enable the RSA-PSK based ciphersuite modes in SSL / TLS.
*
* Requires: POLARSSL_RSA_C, POLARSSL_PKCS1_V15,
* POLARSSL_X509_CRT_PARSE_C
*
* This enables the following ciphersuites (if other requisites are
* enabled as well):
* TLS_RSA_PSK_WITH_AES_256_GCM_SHA384
* TLS_RSA_PSK_WITH_AES_256_CBC_SHA384
* TLS_RSA_PSK_WITH_AES_256_CBC_SHA
* TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384
* TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384
* TLS_RSA_PSK_WITH_AES_128_GCM_SHA256
* TLS_RSA_PSK_WITH_AES_128_CBC_SHA256
* TLS_RSA_PSK_WITH_AES_128_CBC_SHA
* TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256
* TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256
* TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA
* TLS_RSA_PSK_WITH_RC4_128_SHA
*/
#define POLARSSL_KEY_EXCHANGE_RSA_PSK_ENABLED
/**
* \def POLARSSL_KEY_EXCHANGE_RSA_ENABLED
*
* Enable the RSA-only based ciphersuite modes in SSL / TLS.
*
* Requires: POLARSSL_RSA_C, POLARSSL_PKCS1_V15,
* POLARSSL_X509_CRT_PARSE_C
*
* This enables the following ciphersuites (if other requisites are
* enabled as well):
* TLS_RSA_WITH_AES_256_GCM_SHA384
* TLS_RSA_WITH_AES_256_CBC_SHA256
* TLS_RSA_WITH_AES_256_CBC_SHA
* TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384
* TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256
* TLS_RSA_WITH_CAMELLIA_256_CBC_SHA
* TLS_RSA_WITH_AES_128_GCM_SHA256
* TLS_RSA_WITH_AES_128_CBC_SHA256
* TLS_RSA_WITH_AES_128_CBC_SHA
* TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256
* TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256
* TLS_RSA_WITH_CAMELLIA_128_CBC_SHA
* TLS_RSA_WITH_3DES_EDE_CBC_SHA
* TLS_RSA_WITH_RC4_128_SHA
* TLS_RSA_WITH_RC4_128_MD5
*/
#define POLARSSL_KEY_EXCHANGE_RSA_ENABLED
/**
* \def POLARSSL_KEY_EXCHANGE_DHE_RSA_ENABLED
*
* Enable the DHE-RSA based ciphersuite modes in SSL / TLS.
*
* Requires: POLARSSL_DHM_C, POLARSSL_RSA_C, POLARSSL_PKCS1_V15,
* POLARSSL_X509_CRT_PARSE_C
*
* This enables the following ciphersuites (if other requisites are
* enabled as well):
* TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
* TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
* TLS_DHE_RSA_WITH_AES_256_CBC_SHA
* TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
* TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256
* TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA
* TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
* TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
* TLS_DHE_RSA_WITH_AES_128_CBC_SHA
* TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
* TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
* TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA
* TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
*/
#define POLARSSL_KEY_EXCHANGE_DHE_RSA_ENABLED
/**
* \def POLARSSL_KEY_EXCHANGE_ECDHE_RSA_ENABLED
*
* Enable the ECDHE-RSA based ciphersuite modes in SSL / TLS.
*
* Requires: POLARSSL_ECDH_C, POLARSSL_RSA_C, POLARSSL_PKCS1_V15,
* POLARSSL_X509_CRT_PARSE_C
*
* This enables the following ciphersuites (if other requisites are
* enabled as well):
* TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
* TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
* TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
* TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
* TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384
* TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
* TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
* TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
* TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
* TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
* TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
* TLS_ECDHE_RSA_WITH_RC4_128_SHA
*/
#define POLARSSL_KEY_EXCHANGE_ECDHE_RSA_ENABLED
/**
* \def POLARSSL_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
*
* Enable the ECDHE-ECDSA based ciphersuite modes in SSL / TLS.
*
* Requires: POLARSSL_ECDH_C, POLARSSL_ECDSA_C, POLARSSL_X509_CRT_PARSE_C,
*
* This enables the following ciphersuites (if other requisites are
* enabled as well):
* TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
* TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
* TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
* TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
* TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
* TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
* TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
* TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
* TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
* TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
* TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
* TLS_ECDHE_ECDSA_WITH_RC4_128_SHA
*/
#define POLARSSL_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
/**
* \def POLARSSL_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
*
* Enable the ECDH-ECDSA based ciphersuite modes in SSL / TLS.
*
* Requires: POLARSSL_ECDH_C, POLARSSL_X509_CRT_PARSE_C
*
* This enables the following ciphersuites (if other requisites are
* enabled as well):
* TLS_ECDH_ECDSA_WITH_RC4_128_SHA
* TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
* TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
* TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
* TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
* TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
* TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
* TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
* TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
* TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
* TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
* TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
*/
#define POLARSSL_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
/**
* \def POLARSSL_KEY_EXCHANGE_ECDH_RSA_ENABLED
*
* Enable the ECDH-RSA based ciphersuite modes in SSL / TLS.
*
* Requires: POLARSSL_ECDH_C, POLARSSL_X509_CRT_PARSE_C
*
* This enables the following ciphersuites (if other requisites are
* enabled as well):
* TLS_ECDH_RSA_WITH_RC4_128_SHA
* TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
* TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
* TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
* TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
* TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
* TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
* TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
* TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256
* TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384
* TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256
* TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384
*/
#define POLARSSL_KEY_EXCHANGE_ECDH_RSA_ENABLED
/**
* \def POLARSSL_PK_PARSE_EC_EXTENDED
*
* Enhance support for reading EC keys using variants of SEC1 not allowed by
* RFC 5915 and RFC 5480.
*
* Currently this means parsing the SpecifiedECDomain choice of EC
* parameters (only known groups are supported, not arbitrary domains, to
* avoid validation issues).
*
* Disable if you only need to support RFC 5915 + 5480 key formats.
*/
#define POLARSSL_PK_PARSE_EC_EXTENDED
/**
* \def POLARSSL_ERROR_STRERROR_BC
*
* Make available the backward compatible error_strerror() next to the
* current polarssl_strerror().
*
* Disable if you run into name conflicts and want to really remove the
* error_strerror()
*/
#define POLARSSL_ERROR_STRERROR_BC
/**
* \def POLARSSL_ERROR_STRERROR_DUMMY
*
* Enable a dummy error function to make use of polarssl_strerror() in
* third party libraries easier.
*
* Disable if you run into name conflicts and want to really remove the
* polarssl_strerror()
*/
#define POLARSSL_ERROR_STRERROR_DUMMY
/**
* \def POLARSSL_GENPRIME
*
* Enable the prime-number generation code.
*
* Requires: POLARSSL_BIGNUM_C
*/
#define POLARSSL_GENPRIME
/**
* \def POLARSSL_FS_IO
*
* Enable functions that use the filesystem.
*/
#define POLARSSL_FS_IO
/**
* \def POLARSSL_NO_DEFAULT_ENTROPY_SOURCES
*
* Do not add default entropy sources. These are the platform specific,
* hardclock and HAVEGE based poll functions.
*
* This is useful to have more control over the added entropy sources in an
* application.
*
* Uncomment this macro to prevent loading of default entropy functions.
*/
//#define POLARSSL_NO_DEFAULT_ENTROPY_SOURCES
/**
* \def POLARSSL_NO_PLATFORM_ENTROPY
*
* Do not use built-in platform entropy functions.
* This is useful if your platform does not support
* standards like the /dev/urandom or Windows CryptoAPI.
*
* Uncomment this macro to disable the built-in platform entropy functions.
*/
//#define POLARSSL_NO_PLATFORM_ENTROPY
/**
* \def POLARSSL_ENTROPY_FORCE_SHA256
*
* Force the entropy accumulator to use a SHA-256 accumulator instead of the
* default SHA-512 based one (if both are available).
*
* Requires: POLARSSL_SHA256_C
*
* On 32-bit systems SHA-256 can be much faster than SHA-512. Use this option
* if you have performance concerns.
*
* This option is only useful if both POLARSSL_SHA256_C and
* POLARSSL_SHA512_C are defined. Otherwise the available hash module is used.
*/
//#define POLARSSL_ENTROPY_FORCE_SHA256
/**
* \def POLARSSL_MEMORY_DEBUG
*
* Enable debugging of buffer allocator memory issues. Automatically prints
* (to stderr) all (fatal) messages on memory allocation issues. Enables
* function for 'debug output' of allocated memory.
*
* Requires: POLARSSL_MEMORY_BUFFER_ALLOC_C
*
* Uncomment this macro to let the buffer allocator print out error messages.
*/
//#define POLARSSL_MEMORY_DEBUG
/**
* \def POLARSSL_MEMORY_BACKTRACE
*
* Include backtrace information with each allocated block.
*
* Requires: POLARSSL_MEMORY_BUFFER_ALLOC_C
* GLIBC-compatible backtrace() an backtrace_symbols() support
*
* Uncomment this macro to include backtrace information
*/
//#define POLARSSL_MEMORY_BACKTRACE
/**
* \def POLARSSL_PKCS1_V15
*
* Enable support for PKCS#1 v1.5 encoding.
*
* Requires: POLARSSL_RSA_C
*
* This enables support for PKCS#1 v1.5 operations.
*/
#define POLARSSL_PKCS1_V15
/**
* \def POLARSSL_PKCS1_V21
*
* Enable support for PKCS#1 v2.1 encoding.
*
* Requires: POLARSSL_MD_C, POLARSSL_RSA_C
*
* This enables support for RSAES-OAEP and RSASSA-PSS operations.
*/
#define POLARSSL_PKCS1_V21
/**
* \def POLARSSL_RSA_NO_CRT
*
* Do not use the Chinese Remainder Theorem for the RSA private operation.
*
* Uncomment this macro to disable the use of CRT in RSA.
*
*/
//#define POLARSSL_RSA_NO_CRT
/**
* \def POLARSSL_SELF_TEST
*
* Enable the checkup functions (*_self_test).
*/
#define POLARSSL_SELF_TEST
/**
* \def POLARSSL_SSL_ALL_ALERT_MESSAGES
*
* Enable sending of alert messages in case of encountered errors as per RFC.
* If you choose not to send the alert messages, PolarSSL can still communicate
* with other servers, only debugging of failures is harder.
*
* The advantage of not sending alert messages, is that no information is given
* about reasons for failures thus preventing adversaries of gaining intel.
*
* Enable sending of all alert messages
*/
#define POLARSSL_SSL_ALERT_MESSAGES
/**
* \def POLARSSL_SSL_DEBUG_ALL
*
* Enable the debug messages in SSL module for all issues.
* Debug messages have been disabled in some places to prevent timing
* attacks due to (unbalanced) debugging function calls.
*
* If you need all error reporting you should enable this during debugging,
* but remove this for production servers that should log as well.
*
* Uncomment this macro to report all debug messages on errors introducing
* a timing side-channel.
*
*/
//#define POLARSSL_SSL_DEBUG_ALL
/**
* \def POLARSSL_SSL_HW_RECORD_ACCEL
*
* Enable hooking functions in SSL module for hardware acceleration of
* individual records.
*
* Uncomment this macro to enable hooking functions.
*/
//#define POLARSSL_SSL_HW_RECORD_ACCEL
/**
* \def POLARSSL_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO
*
* Enable support for receiving and parsing SSLv2 Client Hello messages for the
* SSL Server module (POLARSSL_SSL_SRV_C).
*
* Comment this macro to disable support for SSLv2 Client Hello messages.
*/
#define POLARSSL_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO
/**
* \def POLARSSL_SSL_SRV_RESPECT_CLIENT_PREFERENCE
*
* Pick the ciphersuite according to the client's preferences rather than ours
* in the SSL Server module (POLARSSL_SSL_SRV_C).
*
* Uncomment this macro to respect client's ciphersuite order
*/
//#define POLARSSL_SSL_SRV_RESPECT_CLIENT_PREFERENCE
/**
* \def POLARSSL_SSL_MAX_FRAGMENT_LENGTH
*
* Enable support for RFC 6066 max_fragment_length extension in SSL.
*
* Comment this macro to disable support for the max_fragment_length extension
*/
#define POLARSSL_SSL_MAX_FRAGMENT_LENGTH
/**
* \def POLARSSL_SSL_PROTO_SSL3
*
* Enable support for SSL 3.0.
*
* Requires: POLARSSL_MD5_C
* POLARSSL_SHA1_C
*
* Comment this macro to disable support for SSL 3.0
*/
#define POLARSSL_SSL_PROTO_SSL3
/**
* \def POLARSSL_SSL_PROTO_TLS1
*
* Enable support for TLS 1.0.
*
* Requires: POLARSSL_MD5_C
* POLARSSL_SHA1_C
*
* Comment this macro to disable support for TLS 1.0
*/
#define POLARSSL_SSL_PROTO_TLS1
/**
* \def POLARSSL_SSL_PROTO_TLS1_1
*
* Enable support for TLS 1.1.
*
* Requires: POLARSSL_MD5_C
* POLARSSL_SHA1_C
*
* Comment this macro to disable support for TLS 1.1
*/
#define POLARSSL_SSL_PROTO_TLS1_1
/**
* \def POLARSSL_SSL_PROTO_TLS1_2
*
* Enable support for TLS 1.2.
*
* Requires: POLARSSL_SHA1_C or POLARSSL_SHA256_C or POLARSSL_SHA512_C
* (Depends on ciphersuites)
*
* Comment this macro to disable support for TLS 1.2
*/
#define POLARSSL_SSL_PROTO_TLS1_2
/**
* \def POLARSSL_SSL_ALPN
*
* Enable support for Application Layer Protocol Negotiation.
* draft-ietf-tls-applayerprotoneg-05
*
* Comment this macro to disable support for ALPN.
*/
#define POLARSSL_SSL_ALPN
/**
* \def POLARSSL_SSL_SESSION_TICKETS
*
* Enable support for RFC 5077 session tickets in SSL.
*
* Requires: POLARSSL_AES_C
* POLARSSL_SHA256_C
* POLARSSL_CIPHER_MODE_CBC
*
* Comment this macro to disable support for SSL session tickets
*/
#define POLARSSL_SSL_SESSION_TICKETS
/**
* \def POLARSSL_SSL_SERVER_NAME_INDICATION
*
* Enable support for RFC 6066 server name indication (SNI) in SSL.
*
* Comment this macro to disable support for server name indication in SSL
*/
#define POLARSSL_SSL_SERVER_NAME_INDICATION
/**
* \def POLARSSL_SSL_TRUNCATED_HMAC
*
* Enable support for RFC 6066 truncated HMAC in SSL.
*
* Comment this macro to disable support for truncated HMAC in SSL
*/
#define POLARSSL_SSL_TRUNCATED_HMAC
/**
* \def POLARSSL_SSL_SET_CURVES
*
* Enable ssl_set_curves().
*
* This is disabled by default since it breaks binary compatibility with the
* 1.3.x line. If you choose to enable it, you will need to rebuild your
* application against the new header files, relinking will not be enough.
* It will be enabled by default, or no longer an option, in the 1.4 branch.
*
* Uncomment to make ssl_set_curves() available.
*/
//#define POLARSSL_SSL_SET_CURVES
/**
* \def POLARSSL_THREADING_ALT
*
* Provide your own alternate threading implementation.
*
* Requires: POLARSSL_THREADING_C
*
* Uncomment this to allow your own alternate threading implementation.
*/
//#define POLARSSL_THREADING_ALT
/**
* \def POLARSSL_THREADING_PTHREAD
*
* Enable the pthread wrapper layer for the threading layer.
*
* Requires: POLARSSL_THREADING_C
*
* Uncomment this to enable pthread mutexes.
*/
//#define POLARSSL_THREADING_PTHREAD
/**
* \def POLARSSL_X509_ALLOW_EXTENSIONS_NON_V3
*
* If set, the X509 parser will not break-off when parsing an X509 certificate
* and encountering an extension in a v1 or v2 certificate.
*
* Uncomment to prevent an error.
*/
//#define POLARSSL_X509_ALLOW_EXTENSIONS_NON_V3
/**
* \def POLARSSL_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION
*
* If set, the X509 parser will not break-off when parsing an X509 certificate
* and encountering an unknown critical extension.
*
* Uncomment to prevent an error.
*/
//#define POLARSSL_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION
/**
* \def POLARSSL_X509_CHECK_KEY_USAGE
*
* Enable verification of the keyUsage extension (CA and leaf certificates).
*
* Disabling this avoids problems with mis-issued and/or misused
* (intermediate) CA and leaf certificates.
*
* \warning Depending on your PKI use, disabling this can be a security risk!
*
* Comment to skip keyUsage checking for both CA and leaf certificates.
*/
#define POLARSSL_X509_CHECK_KEY_USAGE
/**
* \def POLARSSL_X509_CHECK_EXTENDED_KEY_USAGE
*
* Enable verification of the extendedKeyUsage extension (leaf certificates).
*
* Disabling this avoids problems with mis-issued and/or misused certificates.
*
* \warning Depending on your PKI use, disabling this can be a security risk!
*
* Comment to skip extendedKeyUsage checking for certificates.
*/
#define POLARSSL_X509_CHECK_EXTENDED_KEY_USAGE
/**
* \def POLARSSL_ZLIB_SUPPORT
*
* If set, the SSL/TLS module uses ZLIB to support compression and
* decompression of packet data.
*
* \warning TLS-level compression MAY REDUCE SECURITY! See for example the
* CRIME attack. Before enabling this option, you should examine with care if
* CRIME or similar exploits may be a applicable to your use case.
*
* Used in: library/ssl_tls.c
* library/ssl_cli.c
* library/ssl_srv.c
*
* This feature requires zlib library and headers to be present.
*
* Uncomment to enable use of ZLIB
*/
//#define POLARSSL_ZLIB_SUPPORT
/* \} name SECTION: PolarSSL feature support */
/**
* \name SECTION: PolarSSL modules
*
* This section enables or disables entire modules in PolarSSL
* \{
*/
/**
* \def POLARSSL_AESNI_C
*
* Enable AES-NI support on x86-64.
*
* Module: library/aesni.c
* Caller: library/aes.c
*
* Requires: POLARSSL_HAVE_ASM
*
* This modules adds support for the AES-NI instructions on x86-64
*/
#define POLARSSL_AESNI_C
/**
* \def POLARSSL_AES_C
*
* Enable the AES block cipher.
*
* Module: library/aes.c
* Caller: library/ssl_tls.c
* library/pem.c
* library/ctr_drbg.c
*
* This module enables the following ciphersuites (if other requisites are
* enabled as well):
* TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
* TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
* TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
* TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
* TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
* TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
* TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
* TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
* TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
* TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
* TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
* TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
* TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
* TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
* TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
* TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
* TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
* TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
* TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
* TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
* TLS_DHE_RSA_WITH_AES_256_CBC_SHA
* TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
* TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
* TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
* TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
* TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
* TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
* TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
* TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
* TLS_DHE_RSA_WITH_AES_128_CBC_SHA
* TLS_DHE_PSK_WITH_AES_256_GCM_SHA384
* TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384
* TLS_DHE_PSK_WITH_AES_256_CBC_SHA384
* TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA
* TLS_DHE_PSK_WITH_AES_256_CBC_SHA
* TLS_DHE_PSK_WITH_AES_128_GCM_SHA256
* TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256
* TLS_DHE_PSK_WITH_AES_128_CBC_SHA256
* TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA
* TLS_DHE_PSK_WITH_AES_128_CBC_SHA
* TLS_RSA_WITH_AES_256_GCM_SHA384
* TLS_RSA_WITH_AES_256_CBC_SHA256
* TLS_RSA_WITH_AES_256_CBC_SHA
* TLS_RSA_WITH_AES_128_GCM_SHA256
* TLS_RSA_WITH_AES_128_CBC_SHA256
* TLS_RSA_WITH_AES_128_CBC_SHA
* TLS_RSA_PSK_WITH_AES_256_GCM_SHA384
* TLS_RSA_PSK_WITH_AES_256_CBC_SHA384
* TLS_RSA_PSK_WITH_AES_256_CBC_SHA
* TLS_RSA_PSK_WITH_AES_128_GCM_SHA256
* TLS_RSA_PSK_WITH_AES_128_CBC_SHA256
* TLS_RSA_PSK_WITH_AES_128_CBC_SHA
* TLS_PSK_WITH_AES_256_GCM_SHA384
* TLS_PSK_WITH_AES_256_CBC_SHA384
* TLS_PSK_WITH_AES_256_CBC_SHA
* TLS_PSK_WITH_AES_128_GCM_SHA256
* TLS_PSK_WITH_AES_128_CBC_SHA256
* TLS_PSK_WITH_AES_128_CBC_SHA
*
* PEM_PARSE uses AES for decrypting encrypted keys.
*/
#define POLARSSL_AES_C
/**
* \def POLARSSL_ARC4_C
*
* Enable the ARCFOUR stream cipher.
*
* Module: library/arc4.c
* Caller: library/ssl_tls.c
*
* This module enables the following ciphersuites (if other requisites are
* enabled as well):
* TLS_ECDH_ECDSA_WITH_RC4_128_SHA
* TLS_ECDH_RSA_WITH_RC4_128_SHA
* TLS_ECDHE_ECDSA_WITH_RC4_128_SHA
* TLS_ECDHE_RSA_WITH_RC4_128_SHA
* TLS_ECDHE_PSK_WITH_RC4_128_SHA
* TLS_DHE_PSK_WITH_RC4_128_SHA
* TLS_RSA_WITH_RC4_128_SHA
* TLS_RSA_WITH_RC4_128_MD5
* TLS_RSA_PSK_WITH_RC4_128_SHA
* TLS_PSK_WITH_RC4_128_SHA
*/
#define POLARSSL_ARC4_C
/**
* \def POLARSSL_ASN1_PARSE_C
*
* Enable the generic ASN1 parser.
*
* Module: library/asn1.c
* Caller: library/x509.c
* library/dhm.c
* library/pkcs12.c
* library/pkcs5.c
* library/pkparse.c
*/
#define POLARSSL_ASN1_PARSE_C
/**
* \def POLARSSL_ASN1_WRITE_C
*
* Enable the generic ASN1 writer.
*
* Module: library/asn1write.c
* Caller: library/ecdsa.c
* library/pkwrite.c
* library/x509_create.c
* library/x509write_crt.c
* library/x509write_csr.c
*/
#define POLARSSL_ASN1_WRITE_C
/**
* \def POLARSSL_BASE64_C
*
* Enable the Base64 module.
*
* Module: library/base64.c
* Caller: library/pem.c
*
* This module is required for PEM support (required by X.509).
*/
#define POLARSSL_BASE64_C
/**
* \def POLARSSL_BIGNUM_C
*
* Enable the multi-precision integer library.
*
* Module: library/bignum.c
* Caller: library/dhm.c
* library/ecp.c
* library/rsa.c
* library/ssl_tls.c
*
* This module is required for RSA and DHM support.
*/
#define POLARSSL_BIGNUM_C
/**
* \def POLARSSL_BLOWFISH_C
*
* Enable the Blowfish block cipher.
*
* Module: library/blowfish.c
*/
#define POLARSSL_BLOWFISH_C
/**
* \def POLARSSL_CAMELLIA_C
*
* Enable the Camellia block cipher.
*
* Module: library/camellia.c
* Caller: library/ssl_tls.c
*
* This module enables the following ciphersuites (if other requisites are
* enabled as well):
* TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
* TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
* TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256
* TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384
* TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
* TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
* TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256
* TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384
* TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
* TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
* TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
* TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
* TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384
* TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256
* TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA
* TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
* TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
* TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
* TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
* TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
* TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
* TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA
* TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384
* TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
* TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
* TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256
* TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
* TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
* TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384
* TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256
* TLS_RSA_WITH_CAMELLIA_256_CBC_SHA
* TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256
* TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256
* TLS_RSA_WITH_CAMELLIA_128_CBC_SHA
* TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384
* TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384
* TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256
* TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256
* TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384
* TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384
* TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256
* TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256
*/
#define POLARSSL_CAMELLIA_C
/**
* \def POLARSSL_CERTS_C
*
* Enable the test certificates.
*
* Module: library/certs.c
* Caller:
*
* Requires: POLARSSL_PEM_PARSE_C
*
* This module is used for testing (ssl_client/server).
*/
#define POLARSSL_CERTS_C
/**
* \def POLARSSL_CIPHER_C
*
* Enable the generic cipher layer.
*
* Module: library/cipher.c
* Caller: library/ssl_tls.c
*
* Uncomment to enable generic cipher wrappers.
*/
#define POLARSSL_CIPHER_C
/**
* \def POLARSSL_CTR_DRBG_C
*
* Enable the CTR_DRBG AES-256-based random generator.
*
* Module: library/ctr_drbg.c
* Caller:
*
* Requires: POLARSSL_AES_C
*
* This module provides the CTR_DRBG AES-256 random number generator.
*/
#define POLARSSL_CTR_DRBG_C
/**
* \def POLARSSL_DEBUG_C
*
* Enable the debug functions.
*
* Module: library/debug.c
* Caller: library/ssl_cli.c
* library/ssl_srv.c
* library/ssl_tls.c
*
* This module provides debugging functions.
*/
#define POLARSSL_DEBUG_C
/**
* \def POLARSSL_DES_C
*
* Enable the DES block cipher.
*
* Module: library/des.c
* Caller: library/pem.c
* library/ssl_tls.c
*
* This module enables the following ciphersuites (if other requisites are
* enabled as well):
* TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
* TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
* TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
* TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
* TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
* TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA
* TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA
* TLS_RSA_WITH_3DES_EDE_CBC_SHA
* TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA
* TLS_PSK_WITH_3DES_EDE_CBC_SHA
*
* PEM_PARSE uses DES/3DES for decrypting encrypted keys.
*/
#define POLARSSL_DES_C
/**
* \def POLARSSL_DHM_C
*
* Enable the Diffie-Hellman-Merkle module.
*
* Module: library/dhm.c
* Caller: library/ssl_cli.c
* library/ssl_srv.c
*
* This module is used by the following key exchanges:
* DHE-RSA, DHE-PSK
*/
#define POLARSSL_DHM_C
/**
* \def POLARSSL_ECDH_C
*
* Enable the elliptic curve Diffie-Hellman library.
*
* Module: library/ecdh.c
* Caller: library/ssl_cli.c
* library/ssl_srv.c
*
* This module is used by the following key exchanges:
* ECDHE-ECDSA, ECDHE-RSA, DHE-PSK
*
* Requires: POLARSSL_ECP_C
*/
#define POLARSSL_ECDH_C
/**
* \def POLARSSL_ECDSA_C
*
* Enable the elliptic curve DSA library.
*
* Module: library/ecdsa.c
* Caller:
*
* This module is used by the following key exchanges:
* ECDHE-ECDSA
*
* Requires: POLARSSL_ECP_C, POLARSSL_ASN1_WRITE_C, POLARSSL_ASN1_PARSE_C
*/
#define POLARSSL_ECDSA_C
/**
* \def POLARSSL_ECP_C
*
* Enable the elliptic curve over GF(p) library.
*
* Module: library/ecp.c
* Caller: library/ecdh.c
* library/ecdsa.c
*
* Requires: POLARSSL_BIGNUM_C and at least one POLARSSL_ECP_DP_XXX_ENABLED
*/
#define POLARSSL_ECP_C
/**
* \def POLARSSL_ENTROPY_C
*
* Enable the platform-specific entropy code.
*
* Module: library/entropy.c
* Caller:
*
* Requires: POLARSSL_SHA512_C or POLARSSL_SHA256_C
*
* This module provides a generic entropy pool
*/
#define POLARSSL_ENTROPY_C
/**
* \def POLARSSL_ERROR_C
*
* Enable error code to error string conversion.
*
* Module: library/error.c
* Caller:
*
* This module enables polarssl_strerror().
*/
#define POLARSSL_ERROR_C
/**
* \def POLARSSL_GCM_C
*
* Enable the Galois/Counter Mode (GCM) for AES.
*
* Module: library/gcm.c
*
* Requires: POLARSSL_AES_C or POLARSSL_CAMELLIA_C
*
* This module enables the AES-GCM and CAMELLIA-GCM ciphersuites, if other
* requisites are enabled as well.
*/
#define POLARSSL_GCM_C
/**
* \def POLARSSL_HAVEGE_C
*
* Enable the HAVEGE random generator.
*
* Warning: the HAVEGE random generator is not suitable for virtualized
* environments
*
* Warning: the HAVEGE random generator is dependent on timing and specific
* processor traits. It is therefore not advised to use HAVEGE as
* your applications primary random generator or primary entropy pool
* input. As a secondary input to your entropy pool, it IS able add
* the (limited) extra entropy it provides.
*
* Module: library/havege.c
* Caller:
*
* Requires: POLARSSL_TIMING_C
*
* Uncomment to enable the HAVEGE random generator.
*/
//#define POLARSSL_HAVEGE_C
/**
* \def POLARSSL_HMAC_DRBG_C
*
* Enable the HMAC_DRBG random generator.
*
* Module: library/hmac_drbg.c
* Caller:
*
* Requires: POLARSSL_MD_C
*
* Uncomment to enable the HMAC_DRBG random number geerator.
*/
#define POLARSSL_HMAC_DRBG_C
/**
* \def POLARSSL_MD_C
*
* Enable the generic message digest layer.
*
* Module: library/md.c
* Caller:
*
* Uncomment to enable generic message digest wrappers.
*/
#define POLARSSL_MD_C
/**
* \def POLARSSL_MD2_C
*
* Enable the MD2 hash algorithm.
*
* Module: library/md2.c
* Caller:
*
* Uncomment to enable support for (rare) MD2-signed X.509 certs.
*/
//#define POLARSSL_MD2_C
/**
* \def POLARSSL_MD4_C
*
* Enable the MD4 hash algorithm.
*
* Module: library/md4.c
* Caller:
*
* Uncomment to enable support for (rare) MD4-signed X.509 certs.
*/
//#define POLARSSL_MD4_C
/**
* \def POLARSSL_MD5_C
*
* Enable the MD5 hash algorithm.
*
* Module: library/md5.c
* Caller: library/md.c
* library/pem.c
* library/ssl_tls.c
*
* This module is required for SSL/TLS and X.509.
* PEM_PARSE uses MD5 for decrypting encrypted keys.
*/
#define POLARSSL_MD5_C
/**
* \def POLARSSL_MEMORY_C
* Deprecated since 1.3.5. Please use POLARSSL_PLATFORM_MEMORY instead.
*/
//#define POLARSSL_MEMORY_C
/**
* \def POLARSSL_MEMORY_BUFFER_ALLOC_C
*
* Enable the buffer allocator implementation that makes use of a (stack)
* based buffer to 'allocate' dynamic memory. (replaces malloc() and free()
* calls)
*
* Module: library/memory_buffer_alloc.c
*
* Requires: POLARSSL_PLATFORM_C
* POLARSSL_PLATFORM_MEMORY (to use it within PolarSSL)
*
* Enable this module to enable the buffer memory allocator.
*/
//#define POLARSSL_MEMORY_BUFFER_ALLOC_C
/**
* \def POLARSSL_NET_C
*
* Enable the TCP/IP networking routines.
*
* Module: library/net.c
*
* This module provides TCP/IP networking routines.
*/
#define POLARSSL_NET_C
/**
* \def POLARSSL_OID_C
*
* Enable the OID database.
*
* Module: library/oid.c
* Caller: library/asn1write.c
* library/pkcs5.c
* library/pkparse.c
* library/pkwrite.c
* library/rsa.c
* library/x509.c
* library/x509_create.c
* library/x509_crl.c
* library/x509_crt.c
* library/x509_csr.c
* library/x509write_crt.c
* library/x509write_csr.c
*
* This modules translates between OIDs and internal values.
*/
#define POLARSSL_OID_C
/**
* \def POLARSSL_PADLOCK_C
*
* Enable VIA Padlock support on x86.
*
* Module: library/padlock.c
* Caller: library/aes.c
*
* Requires: POLARSSL_HAVE_ASM
*
* This modules adds support for the VIA PadLock on x86.
*/
#define POLARSSL_PADLOCK_C
/**
* \def POLARSSL_PBKDF2_C
*
* Enable PKCS#5 PBKDF2 key derivation function.
* DEPRECATED: Use POLARSSL_PKCS5_C instead
*
* Module: library/pbkdf2.c
*
* Requires: POLARSSL_PKCS5_C
*
* This module adds support for the PKCS#5 PBKDF2 key derivation function.
*/
#define POLARSSL_PBKDF2_C
/**
* \def POLARSSL_PEM_PARSE_C
*
* Enable PEM decoding / parsing.
*
* Module: library/pem.c
* Caller: library/dhm.c
* library/pkparse.c
* library/x509_crl.c
* library/x509_crt.c
* library/x509_csr.c
*
* Requires: POLARSSL_BASE64_C
*
* This modules adds support for decoding / parsing PEM files.
*/
#define POLARSSL_PEM_PARSE_C
/**
* \def POLARSSL_PEM_WRITE_C
*
* Enable PEM encoding / writing.
*
* Module: library/pem.c
* Caller: library/pkwrite.c
* library/x509write_crt.c
* library/x509write_csr.c
*
* Requires: POLARSSL_BASE64_C
*
* This modules adds support for encoding / writing PEM files.
*/
#define POLARSSL_PEM_WRITE_C
/**
* \def POLARSSL_PK_C
*
* Enable the generic public (asymetric) key layer.
*
* Module: library/pk.c
* Caller: library/ssl_tls.c
* library/ssl_cli.c
* library/ssl_srv.c
*
* Requires: POLARSSL_RSA_C or POLARSSL_ECP_C
*
* Uncomment to enable generic public key wrappers.
*/
#define POLARSSL_PK_C
/**
* \def POLARSSL_PK_PARSE_C
*
* Enable the generic public (asymetric) key parser.
*
* Module: library/pkparse.c
* Caller: library/x509_crt.c
* library/x509_csr.c
*
* Requires: POLARSSL_PK_C
*
* Uncomment to enable generic public key parse functions.
*/
#define POLARSSL_PK_PARSE_C
/**
* \def POLARSSL_PK_WRITE_C
*
* Enable the generic public (asymetric) key writer.
*
* Module: library/pkwrite.c
* Caller: library/x509write.c
*
* Requires: POLARSSL_PK_C
*
* Uncomment to enable generic public key write functions.
*/
#define POLARSSL_PK_WRITE_C
/**
* \def POLARSSL_PKCS5_C
*
* Enable PKCS#5 functions.
*
* Module: library/pkcs5.c
*
* Requires: POLARSSL_MD_C
*
* This module adds support for the PKCS#5 functions.
*/
#define POLARSSL_PKCS5_C
/**
* \def POLARSSL_PKCS11_C
*
* Enable wrapper for PKCS#11 smartcard support.
*
* Module: library/pkcs11.c
* Caller: library/pk.c
*
* Requires: POLARSSL_PK_C
*
* This module enables SSL/TLS PKCS #11 smartcard support.
* Requires the presence of the PKCS#11 helper library (libpkcs11-helper)
*/
//#define POLARSSL_PKCS11_C
/**
* \def POLARSSL_PKCS12_C
*
* Enable PKCS#12 PBE functions.
* Adds algorithms for parsing PKCS#8 encrypted private keys
*
* Module: library/pkcs12.c
* Caller: library/pkparse.c
*
* Requires: POLARSSL_ASN1_PARSE_C, POLARSSL_CIPHER_C, POLARSSL_MD_C
* Can use: POLARSSL_ARC4_C
*
* This module enables PKCS#12 functions.
*/
#define POLARSSL_PKCS12_C
/**
* \def POLARSSL_PLATFORM_C
*
* Enable the platform abstraction layer that allows you to re-assign
* functions like malloc(), free(), printf(), fprintf()
*
* Module: library/platform.c
* Caller: Most other .c files
*
* This module enables abstraction of common (libc) functions.
*/
#define POLARSSL_PLATFORM_C
/**
* \def POLARSSL_RIPEMD160_C
*
* Enable the RIPEMD-160 hash algorithm.
*
* Module: library/ripemd160.c
* Caller: library/md.c
*
*/
#define POLARSSL_RIPEMD160_C
/**
* \def POLARSSL_RSA_C
*
* Enable the RSA public-key cryptosystem.
*
* Module: library/rsa.c
* Caller: library/ssl_cli.c
* library/ssl_srv.c
* library/ssl_tls.c
* library/x509.c
*
* This module is used by the following key exchanges:
* RSA, DHE-RSA, ECDHE-RSA, RSA-PSK
*
* Requires: POLARSSL_BIGNUM_C, POLARSSL_OID_C
*/
#define POLARSSL_RSA_C
/**
* \def POLARSSL_SHA1_C
*
* Enable the SHA1 cryptographic hash algorithm.
*
* Module: library/sha1.c
* Caller: library/md.c
* library/ssl_cli.c
* library/ssl_srv.c
* library/ssl_tls.c
* library/x509write_crt.c
*
* This module is required for SSL/TLS and SHA1-signed certificates.
*/
#define POLARSSL_SHA1_C
/**
* \def POLARSSL_SHA256_C
*
* Enable the SHA-224 and SHA-256 cryptographic hash algorithms.
* (Used to be POLARSSL_SHA2_C)
*
* Module: library/sha256.c
* Caller: library/entropy.c
* library/md.c
* library/ssl_cli.c
* library/ssl_srv.c
* library/ssl_tls.c
*
* This module adds support for SHA-224 and SHA-256.
* This module is required for the SSL/TLS 1.2 PRF function.
*/
#define POLARSSL_SHA256_C
/**
* \def POLARSSL_SHA512_C
*
* Enable the SHA-384 and SHA-512 cryptographic hash algorithms.
* (Used to be POLARSSL_SHA4_C)
*
* Module: library/sha512.c
* Caller: library/entropy.c
* library/md.c
* library/ssl_cli.c
* library/ssl_srv.c
*
* This module adds support for SHA-384 and SHA-512.
*/
#define POLARSSL_SHA512_C
/**
* \def POLARSSL_SSL_CACHE_C
*
* Enable simple SSL cache implementation.
*
* Module: library/ssl_cache.c
* Caller:
*
* Requires: POLARSSL_SSL_CACHE_C
*/
#define POLARSSL_SSL_CACHE_C
/**
* \def POLARSSL_SSL_CLI_C
*
* Enable the SSL/TLS client code.
*
* Module: library/ssl_cli.c
* Caller:
*
* Requires: POLARSSL_SSL_TLS_C
*
* This module is required for SSL/TLS client support.
*/
#define POLARSSL_SSL_CLI_C
/**
* \def POLARSSL_SSL_SRV_C
*
* Enable the SSL/TLS server code.
*
* Module: library/ssl_srv.c
* Caller:
*
* Requires: POLARSSL_SSL_TLS_C
*
* This module is required for SSL/TLS server support.
*/
#define POLARSSL_SSL_SRV_C
/**
* \def POLARSSL_SSL_TLS_C
*
* Enable the generic SSL/TLS code.
*
* Module: library/ssl_tls.c
* Caller: library/ssl_cli.c
* library/ssl_srv.c
*
* Requires: POLARSSL_CIPHER_C, POLARSSL_MD_C
* and at least one of the POLARSSL_SSL_PROTO_* defines
*
* This module is required for SSL/TLS.
*/
#define POLARSSL_SSL_TLS_C
/**
* \def POLARSSL_THREADING_C
*
* Enable the threading abstraction layer.
* By default PolarSSL assumes it is used in a non-threaded environment or that
* contexts are not shared between threads. If you do intend to use contexts
* between threads, you will need to enable this layer to prevent race
* conditions.
*
* Module: library/threading.c
*
* This allows different threading implementations (self-implemented or
* provided).
*
* You will have to enable either POLARSSL_THREADING_ALT or
* POLARSSL_THREADING_PTHREAD.
*
* Enable this layer to allow use of mutexes within PolarSSL
*/
//#define POLARSSL_THREADING_C
/**
* \def POLARSSL_TIMING_C
*
* Enable the portable timing interface.
*
* Module: library/timing.c
* Caller: library/havege.c
*
* This module is used by the HAVEGE random number generator.
*/
#define POLARSSL_TIMING_C
/**
* \def POLARSSL_VERSION_C
*
* Enable run-time version information.
*
* Module: library/version.c
*
* This module provides run-time version information.
*/
#define POLARSSL_VERSION_C
/**
* \def POLARSSL_X509_USE_C
*
* Enable X.509 core for using certificates.
*
* Module: library/x509.c
* Caller: library/x509_crl.c
* library/x509_crt.c
* library/x509_csr.c
*
* Requires: POLARSSL_ASN1_PARSE_C, POLARSSL_BIGNUM_C, POLARSSL_OID_C,
* POLARSSL_PK_PARSE_C
*
* This module is required for the X.509 parsing modules.
*/
#define POLARSSL_X509_USE_C
/**
* \def POLARSSL_X509_CRT_PARSE_C
*
* Enable X.509 certificate parsing.
*
* Module: library/x509_crt.c
* Caller: library/ssl_cli.c
* library/ssl_srv.c
* library/ssl_tls.c
*
* Requires: POLARSSL_X509_USE_C
*
* This module is required for X.509 certificate parsing.
*/
#define POLARSSL_X509_CRT_PARSE_C
/**
* \def POLARSSL_X509_CRL_PARSE_C
*
* Enable X.509 CRL parsing.
*
* Module: library/x509_crl.c
* Caller: library/x509_crt.c
*
* Requires: POLARSSL_X509_USE_C
*
* This module is required for X.509 CRL parsing.
*/
#define POLARSSL_X509_CRL_PARSE_C
/**
* \def POLARSSL_X509_CSR_PARSE_C
*
* Enable X.509 Certificate Signing Request (CSR) parsing.
*
* Module: library/x509_csr.c
* Caller: library/x509_crt_write.c
*
* Requires: POLARSSL_X509_USE_C
*
* This module is used for reading X.509 certificate request.
*/
#define POLARSSL_X509_CSR_PARSE_C
/**
* \def POLARSSL_X509_CREATE_C
*
* Enable X.509 core for creating certificates.
*
* Module: library/x509_create.c
*
* Requires: POLARSSL_BIGNUM_C, POLARSSL_OID_C, POLARSSL_PK_WRITE_C
*
* This module is the basis for creating X.509 certificates and CSRs.
*/
#define POLARSSL_X509_CREATE_C
/**
* \def POLARSSL_X509_CRT_WRITE_C
*
* Enable creating X.509 certificates.
*
* Module: library/x509_crt_write.c
*
* Requires: POLARSSL_CREATE_C
*
* This module is required for X.509 certificate creation.
*/
#define POLARSSL_X509_CRT_WRITE_C
/**
* \def POLARSSL_X509_CSR_WRITE_C
*
* Enable creating X.509 Certificate Signing Requests (CSR).
*
* Module: library/x509_csr_write.c
*
* Requires: POLARSSL_CREATE_C
*
* This module is required for X.509 certificate request writing.
*/
#define POLARSSL_X509_CSR_WRITE_C
/**
* \def POLARSSL_XTEA_C
*
* Enable the XTEA block cipher.
*
* Module: library/xtea.c
* Caller:
*/
#define POLARSSL_XTEA_C
/* \} name SECTION: PolarSSL modules */
/**
* \name SECTION: Module configuration options
*
* This section allows for the setting of module specific sizes and
* configuration options. The default values are already present in the
* relevant header files and should suffice for the regular use cases.
* Our advice is to enable POLARSSL_CONFIG_OPTIONS and change values here
* only if you have a good reason and know the consequences.
*
* If POLARSSL_CONFIG_OPTIONS is undefined here the options in the module
* header file take precedence.
*
* Please check the respective header file for documentation on these
* parameters (to prevent duplicate documentation).
*
* Uncomment POLARSSL_CONFIG_OPTIONS to enable using the values defined here.
* \{
*/
//#define POLARSSL_CONFIG_OPTIONS /**< Enable config.h module value configuration */
#if defined(POLARSSL_CONFIG_OPTIONS)
// MPI / BIGNUM options
//
#define POLARSSL_MPI_WINDOW_SIZE 6 /**< Maximum windows size used. */
#define POLARSSL_MPI_MAX_SIZE 512 /**< Maximum number of bytes for usable MPIs. */
// CTR_DRBG options
//
#define CTR_DRBG_ENTROPY_LEN 48 /**< Amount of entropy used per seed by default (48 with SHA-512, 32 with SHA-256) */
#define CTR_DRBG_RESEED_INTERVAL 10000 /**< Interval before reseed is performed by default */
#define CTR_DRBG_MAX_INPUT 256 /**< Maximum number of additional input bytes */
#define CTR_DRBG_MAX_REQUEST 1024 /**< Maximum number of requested bytes per call */
#define CTR_DRBG_MAX_SEED_INPUT 384 /**< Maximum size of (re)seed buffer */
// HMAC_DRBG options
//
#define POLARSSL_HMAC_DRBG_RESEED_INTERVAL 10000 /**< Interval before reseed is performed by default */
#define POLARSSL_HMAC_DRBG_MAX_INPUT 256 /**< Maximum number of additional input bytes */
#define POLARSSL_HMAC_DRBG_MAX_REQUEST 1024 /**< Maximum number of requested bytes per call */
#define POLARSSL_HMAC_DRBG_MAX_SEED_INPUT 384 /**< Maximum size of (re)seed buffer */
// ECP options
//
#define POLARSSL_ECP_MAX_BITS 521 /**< Maximum bit size of groups */
#define POLARSSL_ECP_WINDOW_SIZE 6 /**< Maximum window size used */
#define POLARSSL_ECP_FIXED_POINT_OPTIM 1 /**< Enable fixed-point speed-up */
// Entropy options
//
#define ENTROPY_MAX_SOURCES 20 /**< Maximum number of sources supported */
#define ENTROPY_MAX_GATHER 128 /**< Maximum amount requested from entropy sources */
// Memory buffer allocator options
#define MEMORY_ALIGN_MULTIPLE 4 /**< Align on multiples of this value */
// Platform options
//
#define POLARSSL_PLATFORM_STD_MEM_HDR <stdlib.h> /**< Header to include for default allocator. Don't define if no header is needed. */
#define POLARSSL_PLATFORM_STD_MALLOC malloc /**< Default allocator to use, can be undefined */
#define POLARSSL_PLATFORM_STD_FREE free /**< Default free to use, can be undefined */
#define POLARSSL_PLATFORM_STD_PRINTF printf /**< Default printf to use, can be undefined */
#define POLARSSL_PLATFORM_STD_FPRINTF fprintf /**< Default fprintf to use, can be undefined */
// SSL Cache options
//
#define SSL_CACHE_DEFAULT_TIMEOUT 86400 /**< 1 day */
#define SSL_CACHE_DEFAULT_MAX_ENTRIES 50 /**< Maximum entries in cache */
// SSL options
//
#define SSL_MAX_CONTENT_LEN 16384 /**< Size of the input / output buffer */
#define SSL_DEFAULT_TICKET_LIFETIME 86400 /**< Lifetime of session tickets (if enabled) */
#endif /* POLARSSL_CONFIG_OPTIONS */
/* \} name */
/*
* Sanity checks on defines and dependencies
*/
#if defined(POLARSSL_AESNI_C) && !defined(POLARSSL_HAVE_ASM)
#error "POLARSSL_AESNI_C defined, but not all prerequisites"
#endif
#if defined(POLARSSL_CERTS_C) && !defined(POLARSSL_PEM_PARSE_C)
#error "POLARSSL_CERTS_C defined, but not all prerequisites"
#endif
#if defined(POLARSSL_CTR_DRBG_C) && !defined(POLARSSL_AES_C)
#error "POLARSSL_CTR_DRBG_C defined, but not all prerequisites"
#endif
#if defined(POLARSSL_DHM_C) && !defined(POLARSSL_BIGNUM_C)
#error "POLARSSL_DHM_C defined, but not all prerequisites"
#endif
#if defined(POLARSSL_ECDH_C) && !defined(POLARSSL_ECP_C)
#error "POLARSSL_ECDH_C defined, but not all prerequisites"
#endif
#if defined(POLARSSL_ECDSA_C) && \
( !defined(POLARSSL_ECP_C) || \
!defined(POLARSSL_ASN1_PARSE_C) || \
!defined(POLARSSL_ASN1_WRITE_C) )
#error "POLARSSL_ECDSA_C defined, but not all prerequisites"
#endif
#if defined(POLARSSL_ECDSA_DETERMINISTIC) && !defined(POLARSSL_HMAC_DRBG_C)
#error "POLARSSL_ECDSA_DETERMINISTIC defined, but not all prerequisites"
#endif
#if defined(POLARSSL_ECP_C) && ( !defined(POLARSSL_BIGNUM_C) || ( \
!defined(POLARSSL_ECP_DP_SECP192R1_ENABLED) && \
!defined(POLARSSL_ECP_DP_SECP224R1_ENABLED) && \
!defined(POLARSSL_ECP_DP_SECP256R1_ENABLED) && \
!defined(POLARSSL_ECP_DP_SECP384R1_ENABLED) && \
!defined(POLARSSL_ECP_DP_SECP521R1_ENABLED) && \
!defined(POLARSSL_ECP_DP_BP256R1_ENABLED) && \
!defined(POLARSSL_ECP_DP_BP384R1_ENABLED) && \
!defined(POLARSSL_ECP_DP_BP512R1_ENABLED) && \
!defined(POLARSSL_ECP_DP_M255_ENABLED) && \
!defined(POLARSSL_ECP_DP_SECP192K1_ENABLED) && \
!defined(POLARSSL_ECP_DP_SECP224K1_ENABLED) && \
!defined(POLARSSL_ECP_DP_SECP256K1_ENABLED) ) )
#error "POLARSSL_ECP_C defined, but not all prerequisites"
#endif
#if defined(POLARSSL_ENTROPY_C) && (!defined(POLARSSL_SHA512_C) && \
!defined(POLARSSL_SHA256_C))
#error "POLARSSL_ENTROPY_C defined, but not all prerequisites"
#endif
#if defined(POLARSSL_ENTROPY_C) && defined(POLARSSL_SHA512_C) && \
defined(POLARSSL_CONFIG_OPTIONS) && (CTR_DRBG_ENTROPY_LEN > 64)
#error "CTR_DRBG_ENTROPY_LEN value too high"
#endif
#if defined(POLARSSL_ENTROPY_C) && \
( !defined(POLARSSL_SHA512_C) || defined(POLARSSL_ENTROPY_FORCE_SHA256) ) \
&& defined(POLARSSL_CONFIG_OPTIONS) && (CTR_DRBG_ENTROPY_LEN > 32)
#error "CTR_DRBG_ENTROPY_LEN value too high"
#endif
#if defined(POLARSSL_ENTROPY_C) && \
defined(POLARSSL_ENTROPY_FORCE_SHA256) && !defined(POLARSSL_SHA256_C)
#error "POLARSSL_ENTROPY_FORCE_SHA256 defined, but not all prerequisites"
#endif
#if defined(POLARSSL_GCM_C) && ( \
!defined(POLARSSL_AES_C) && !defined(POLARSSL_CAMELLIA_C) )
#error "POLARSSL_GCM_C defined, but not all prerequisites"
#endif
#if defined(POLARSSL_HAVEGE_C) && !defined(POLARSSL_TIMING_C)
#error "POLARSSL_HAVEGE_C defined, but not all prerequisites"
#endif
#if defined(POLARSSL_HMAC_DRBG) && !defined(POLARSSL_MD_C)
#error "POLARSSL_HMAC_DRBG_C defined, but not all prerequisites"
#endif
#if defined(POLARSSL_KEY_EXCHANGE_ECDH_ECDSA_ENABLED) && \
( !defined(POLARSSL_ECDH_C) || !defined(POLARSSL_X509_CRT_PARSE_C) )
#error "POLARSSL_KEY_EXCHANGE_ECDH_ECDSA_ENABLED defined, but not all prerequisites"
#endif
#if defined(POLARSSL_KEY_EXCHANGE_ECDH_RSA_ENABLED) && \
( !defined(POLARSSL_ECDH_C) || !defined(POLARSSL_X509_CRT_PARSE_C) )
#error "POLARSSL_KEY_EXCHANGE_ECDH_RSA_ENABLED defined, but not all prerequisites"
#endif
#if defined(POLARSSL_KEY_EXCHANGE_DHE_PSK_ENABLED) && !defined(POLARSSL_DHM_C)
#error "POLARSSL_KEY_EXCHANGE_DHE_PSK_ENABLED defined, but not all prerequisites"
#endif
#if defined(POLARSSL_KEY_EXCHANGE_ECDHE_PSK_ENABLED) && \
!defined(POLARSSL_ECDH_C)
#error "POLARSSL_KEY_EXCHANGE_ECDHE_PSK_ENABLED defined, but not all prerequisites"
#endif
#if defined(POLARSSL_KEY_EXCHANGE_DHE_RSA_ENABLED) && \
( !defined(POLARSSL_DHM_C) || !defined(POLARSSL_RSA_C) || \
!defined(POLARSSL_X509_CRT_PARSE_C) || !defined(POLARSSL_PKCS1_V15) )
#error "POLARSSL_KEY_EXCHANGE_DHE_RSA_ENABLED defined, but not all prerequisites"
#endif
#if defined(POLARSSL_KEY_EXCHANGE_ECDHE_RSA_ENABLED) && \
( !defined(POLARSSL_ECDH_C) || !defined(POLARSSL_RSA_C) || \
!defined(POLARSSL_X509_CRT_PARSE_C) || !defined(POLARSSL_PKCS1_V15) )
#error "POLARSSL_KEY_EXCHANGE_ECDHE_RSA_ENABLED defined, but not all prerequisites"
#endif
#if defined(POLARSSL_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED) && \
( !defined(POLARSSL_ECDH_C) || !defined(POLARSSL_ECDSA_C) || \
!defined(POLARSSL_X509_CRT_PARSE_C) )
#error "POLARSSL_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED defined, but not all prerequisites"
#endif
#if defined(POLARSSL_KEY_EXCHANGE_RSA_PSK_ENABLED) && \
( !defined(POLARSSL_RSA_C) || !defined(POLARSSL_X509_CRT_PARSE_C) ||\
!defined(POLARSSL_PKCS1_V15) )
#error "POLARSSL_KEY_EXCHANGE_RSA_PSK_ENABLED defined, but not all prerequisites"
#endif
#if defined(POLARSSL_KEY_EXCHANGE_RSA_ENABLED) && \
( !defined(POLARSSL_RSA_C) || !defined(POLARSSL_X509_CRT_PARSE_C) ||\
!defined(POLARSSL_PKCS1_V15) )
#error "POLARSSL_KEY_EXCHANGE_RSA_ENABLED defined, but not all prerequisites"
#endif
#if defined(POLARSSL_MEMORY_BUFFER_ALLOC_C) && \
( !defined(POLARSSL_PLATFORM_C) || !defined(POLARSSL_PLATFORM_MEMORY) )
#error "POLARSSL_MEMORY_BUFFER_ALLOC_C defined, but not all prerequisites"
#endif
#if defined(POLARSSL_PADLOCK_C) && !defined(POLARSSL_HAVE_ASM)
#error "POLARSSL_PADLOCK_C defined, but not all prerequisites"
#endif
#if defined(POLARSSL_PBKDF2_C) && !defined(POLARSSL_MD_C)
#error "POLARSSL_PBKDF2_C defined, but not all prerequisites"
#endif
#if defined(POLARSSL_PEM_PARSE_C) && !defined(POLARSSL_BASE64_C)
#error "POLARSSL_PEM_PARSE_C defined, but not all prerequisites"
#endif
#if defined(POLARSSL_PEM_WRITE_C) && !defined(POLARSSL_BASE64_C)
#error "POLARSSL_PEM_WRITE_C defined, but not all prerequisites"
#endif
#if defined(POLARSSL_PK_PARSE_C) && !defined(POLARSSL_PK_C)
#error "POLARSSL_PK_PARSE_C defined, but not all prerequisites"
#endif
#if defined(POLARSSL_PK_WRITE_C) && !defined(POLARSSL_PK_C)
#error "POLARSSL_PK_WRITE_C defined, but not all prerequisites"
#endif
#if defined(POLARSSL_PKCS11_C) && !defined(POLARSSL_PK_C)
#error "POLARSSL_PKCS11_C defined, but not all prerequisites"
#endif
#if defined(POLARSSL_RSA_C) && ( !defined(POLARSSL_BIGNUM_C) || \
!defined(POLARSSL_OID_C) )
#error "POLARSSL_RSA_C defined, but not all prerequisites"
#endif
#if defined(POLARSSL_SSL_PROTO_SSL3) && ( !defined(POLARSSL_MD5_C) || \
!defined(POLARSSL_SHA1_C) )
#error "POLARSSL_SSL_PROTO_SSL3 defined, but not all prerequisites"
#endif
#if defined(POLARSSL_SSL_PROTO_TLS1) && ( !defined(POLARSSL_MD5_C) || \
!defined(POLARSSL_SHA1_C) )
#error "POLARSSL_SSL_PROTO_TLS1 defined, but not all prerequisites"
#endif
#if defined(POLARSSL_SSL_PROTO_TLS1_1) && ( !defined(POLARSSL_MD5_C) || \
!defined(POLARSSL_SHA1_C) )
#error "POLARSSL_SSL_PROTO_TLS1_1 defined, but not all prerequisites"
#endif
#if defined(POLARSSL_SSL_PROTO_TLS1_2) && ( !defined(POLARSSL_SHA1_C) && \
!defined(POLARSSL_SHA256_C) && !defined(POLARSSL_SHA512_C) )
#error "POLARSSL_SSL_PROTO_TLS1_2 defined, but not all prerequisites"
#endif
#if defined(POLARSSL_SSL_CLI_C) && !defined(POLARSSL_SSL_TLS_C)
#error "POLARSSL_SSL_CLI_C defined, but not all prerequisites"
#endif
#if defined(POLARSSL_SSL_TLS_C) && ( !defined(POLARSSL_CIPHER_C) || \
!defined(POLARSSL_MD_C) )
#error "POLARSSL_SSL_TLS_C defined, but not all prerequisites"
#endif
#if defined(POLARSSL_SSL_SRV_C) && !defined(POLARSSL_SSL_TLS_C)
#error "POLARSSL_SSL_SRV_C defined, but not all prerequisites"
#endif
#if defined(POLARSSL_SSL_TLS_C) && (!defined(POLARSSL_SSL_PROTO_SSL3) && \
!defined(POLARSSL_SSL_PROTO_TLS1) && !defined(POLARSSL_SSL_PROTO_TLS1_1) && \
!defined(POLARSSL_SSL_PROTO_TLS1_2))
#error "POLARSSL_SSL_TLS_C defined, but no protocols are active"
#endif
#if defined(POLARSSL_SSL_TLS_C) && (defined(POLARSSL_SSL_PROTO_SSL3) && \
defined(POLARSSL_SSL_PROTO_TLS1_1) && !defined(POLARSSL_SSL_PROTO_TLS1))
#error "Illegal protocol selection"
#endif
#if defined(POLARSSL_SSL_TLS_C) && (defined(POLARSSL_SSL_PROTO_TLS1) && \
defined(POLARSSL_SSL_PROTO_TLS1_2) && !defined(POLARSSL_SSL_PROTO_TLS1_1))
#error "Illegal protocol selection"
#endif
#if defined(POLARSSL_SSL_TLS_C) && (defined(POLARSSL_SSL_PROTO_SSL3) && \
defined(POLARSSL_SSL_PROTO_TLS1_2) && (!defined(POLARSSL_SSL_PROTO_TLS1) || \
!defined(POLARSSL_SSL_PROTO_TLS1_1)))
#error "Illegal protocol selection"
#endif
#if defined(POLARSSL_SSL_SESSION_TICKETS) && defined(POLARSSL_SSL_TLS_C) && \
( !defined(POLARSSL_AES_C) || !defined(POLARSSL_SHA256_C) || \
!defined(POLARSSL_CIPHER_MODE_CBC) )
#error "POLARSSL_SSL_SESSION_TICKETS_C defined, but not all prerequisites"
#endif
#if defined(POLARSSL_SSL_SERVER_NAME_INDICATION) && \
!defined(POLARSSL_X509_CRT_PARSE_C)
#error "POLARSSL_SSL_SERVER_NAME_INDICATION defined, but not all prerequisites"
#endif
#if defined(POLARSSL_THREADING_PTHREAD)
#if !defined(POLARSSL_THREADING_C) || defined(POLARSSL_THREADING_IMPL)
#error "POLARSSL_THREADING_PTHREAD defined, but not all prerequisites"
#endif
#define POLARSSL_THREADING_IMPL
#endif
#if defined(POLARSSL_THREADING_ALT)
#if !defined(POLARSSL_THREADING_C) || defined(POLARSSL_THREADING_IMPL)
#error "POLARSSL_THREADING_ALT defined, but not all prerequisites"
#endif
#define POLARSSL_THREADING_IMPL
#endif
#if defined(POLARSSL_THREADING_C) && !defined(POLARSSL_THREADING_IMPL)
#error "POLARSSL_THREADING_C defined, single threading implementation required"
#endif
#undef POLARSSL_THREADING_IMPL
#if defined(POLARSSL_X509_USE_C) && ( !defined(POLARSSL_BIGNUM_C) || \
!defined(POLARSSL_OID_C) || !defined(POLARSSL_ASN1_PARSE_C) || \
!defined(POLARSSL_PK_PARSE_C) )
#error "POLARSSL_X509_USE_C defined, but not all prerequisites"
#endif
#if defined(POLARSSL_X509_CREATE_C) && ( !defined(POLARSSL_BIGNUM_C) || \
!defined(POLARSSL_OID_C) || !defined(POLARSSL_ASN1_WRITE_C) || \
!defined(POLARSSL_PK_WRITE_C) )
#error "POLARSSL_X509_CREATE_C defined, but not all prerequisites"
#endif
#if defined(POLARSSL_X509_CRT_PARSE_C) && ( !defined(POLARSSL_X509_USE_C) )
#error "POLARSSL_X509_CRT_PARSE_C defined, but not all prerequisites"
#endif
#if defined(POLARSSL_X509_CRL_PARSE_C) && ( !defined(POLARSSL_X509_USE_C) )
#error "POLARSSL_X509_CRL_PARSE_C defined, but not all prerequisites"
#endif
#if defined(POLARSSL_X509_CSR_PARSE_C) && ( !defined(POLARSSL_X509_USE_C) )
#error "POLARSSL_X509_CSR_PARSE_C defined, but not all prerequisites"
#endif
#if defined(POLARSSL_X509_CRT_WRITE_C) && ( !defined(POLARSSL_X509_CREATE_C) )
#error "POLARSSL_X509_CRT_WRITE_C defined, but not all prerequisites"
#endif
#if defined(POLARSSL_X509_CSR_WRITE_C) && ( !defined(POLARSSL_X509_CREATE_C) )
#error "POLARSSL_X509_CSR_WRITE_C defined, but not all prerequisites"
#endif
#endif /* config.h */