include/mbedtls/chacha20.h - security/mbedtls - Rivoreo Source Code Repositories

 /**
  * \file chacha20.h
  *
  * \brief   This file contains ChaCha20 definitions and functions.
  *
  *          ChaCha20 is a stream cipher that can encrypt and decrypt
  *          information. ChaCha was created by Daniel Bernstein as a variant of
  *          its Salsa cipher https://cr.yp.to/chacha/chacha-20080128.pdf
  *          ChaCha20 is the variant with 20 rounds, that was also standardized
  *          in RFC 7539.
  *
  * \author Daniel King <damaki.gh@gmail.com>
  */

 /*  Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved.
  *  SPDX-License-Identifier: Apache-2.0
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may
  *  not use this file except in compliance with the License.
  *  You may obtain a copy of the License at
  *
  *  http://www.apache.org/licenses/LICENSE-2.0
  *
  *  Unless required by applicable law or agreed to in writing, software
  *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
  *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  *  See the License for the specific language governing permissions and
  *  limitations under the License.
  *
  *  This file is part of Mbed TLS (https://tls.mbed.org)
  */

 #ifndef MBEDTLS_CHACHA20_H
 #define MBEDTLS_CHACHA20_H

 #if !defined(MBEDTLS_CONFIG_FILE)
 #include "config.h"
 #else
 #include MBEDTLS_CONFIG_FILE
 #endif

 #include <stdint.h>
 #include <stddef.h>

 #define MBEDTLS_ERR_CHACHA20_BAD_INPUT_DATA         -0x0051 /**< Invalid input parameter(s). */

 /* MBEDTLS_ERR_CHACHA20_FEATURE_UNAVAILABLE is deprecated and should not be
  * used. */
 #define MBEDTLS_ERR_CHACHA20_FEATURE_UNAVAILABLE    -0x0053 /**< Feature not available. For example, s part of the API is not implemented. */

 /* MBEDTLS_ERR_CHACHA20_HW_ACCEL_FAILED is deprecated and should not be used.
  */
 #define MBEDTLS_ERR_CHACHA20_HW_ACCEL_FAILED        -0x0055  /**< Chacha20 hardware accelerator failed. */

 #ifdef __cplusplus
 extern "C" {
 #endif

 #if !defined(MBEDTLS_CHACHA20_ALT)

 typedef struct mbedtls_chacha20_context
 {
     uint32_t state[16];          /*! The state (before round operations). */
     uint8_t  keystream8[64];     /*! Leftover keystream bytes. */
     size_t keystream_bytes_used; /*! Number of keystream bytes already used. */
 }
 mbedtls_chacha20_context;

 #else  /* MBEDTLS_CHACHA20_ALT */
 #include "chacha20_alt.h"
 #endif /* MBEDTLS_CHACHA20_ALT */

 /**
  * \brief           This function initializes the specified ChaCha20 context.
  *
  *                  It must be the first API called before using
  *                  the context.
  *
  *                  It is usually followed by calls to
  *                  \c mbedtls_chacha20_setkey() and
  *                  \c mbedtls_chacha20_starts(), then one or more calls to
  *                  to \c mbedtls_chacha20_update(), and finally to
  *                  \c mbedtls_chacha20_free().
  *
  * \param ctx       The ChaCha20 context to initialize.
  *                  This must not be \c NULL.
  */
 void mbedtls_chacha20_init( mbedtls_chacha20_context *ctx );

 /**
  * \brief           This function releases and clears the specified
  *                  ChaCha20 context.
  *
  * \param ctx       The ChaCha20 context to clear. This may be \c NULL,
  *                  in which case this function is a no-op. If it is not
  *                  \c NULL, it must point to an initialized context.
  *
  */
 void mbedtls_chacha20_free( mbedtls_chacha20_context *ctx );

 /**
  * \brief           This function sets the encryption/decryption key.
  *
  * \note            After using this function, you must also call
  *                  \c mbedtls_chacha20_starts() to set a nonce before you
  *                  start encrypting/decrypting data with
  *                  \c mbedtls_chacha_update().
  *
  * \param ctx       The ChaCha20 context to which the key should be bound.
  *                  It must be initialized.
  * \param key       The encryption/decryption key. This must be \c 32 Bytes
  *                  in length.
  *
  * \return          \c 0 on success.
  * \return          #MBEDTLS_ERR_CHACHA20_BAD_INPUT_DATA if ctx or key is NULL.
  */
 int mbedtls_chacha20_setkey( mbedtls_chacha20_context *ctx,
                              const unsigned char key[32] );

 /**
  * \brief           This function sets the nonce and initial counter value.
  *
  * \note            A ChaCha20 context can be re-used with the same key by
  *                  calling this function to change the nonce.
  *
  * \warning         You must never use the same nonce twice with the same key.
  *                  This would void any confidentiality guarantees for the
  *                  messages encrypted with the same nonce and key.
  *
  * \param ctx       The ChaCha20 context to which the nonce should be bound.
  *                  It must be initialized and bound to a key.
  * \param nonce     The nonce. This must be \c 12 Bytes in size.
  * \param counter   The initial counter value. This is usually \c 0.
  *
  * \return          \c 0 on success.
  * \return          #MBEDTLS_ERR_CHACHA20_BAD_INPUT_DATA if ctx or nonce is
  *                  NULL.
  */
 int mbedtls_chacha20_starts( mbedtls_chacha20_context* ctx,
                              const unsigned char nonce[12],
                              uint32_t counter );

 /**
  * \brief           This function encrypts or decrypts data.
  *
  *                  Since ChaCha20 is a stream cipher, the same operation is
  *                  used for encrypting and decrypting data.
  *
  * \note            The \p input and \p output pointers must either be equal or
  *                  point to non-overlapping buffers.
  *
  * \note            \c mbedtls_chacha20_setkey() and
  *                  \c mbedtls_chacha20_starts() must be called at least once
  *                  to setup the context before this function can be called.
  *
  * \note            This function can be called multiple times in a row in
  *                  order to encrypt of decrypt data piecewise with the same
  *                  key and nonce.
  *
  * \param ctx       The ChaCha20 context to use for encryption or decryption.
  *                  It must be initialized and bound to a key and nonce.
  * \param size      The length of the input data in Bytes.
  * \param input     The buffer holding the input data.
  *                  This pointer can be \c NULL if `size == 0`.
  * \param output    The buffer holding the output data.
  *                  This must be able to hold \p size Bytes.
  *                  This pointer can be \c NULL if `size == 0`.
  *
  * \return          \c 0 on success.
  * \return          A negative error code on failure.
  */
 int mbedtls_chacha20_update( mbedtls_chacha20_context *ctx,
                              size_t size,
                              const unsigned char *input,
                              unsigned char *output );

 /**
  * \brief           This function encrypts or decrypts data with ChaCha20 and
  *                  the given key and nonce.
  *
  *                  Since ChaCha20 is a stream cipher, the same operation is
  *                  used for encrypting and decrypting data.
  *
  * \warning         You must never use the same (key, nonce) pair more than
  *                  once. This would void any confidentiality guarantees for
  *                  the messages encrypted with the same nonce and key.
  *
  * \note            The \p input and \p output pointers must either be equal or
  *                  point to non-overlapping buffers.
  *
  * \param key       The encryption/decryption key.
  *                  This must be \c 32 Bytes in length.
  * \param nonce     The nonce. This must be \c 12 Bytes in size.
  * \param counter   The initial counter value. This is usually \c 0.
  * \param size      The length of the input data in Bytes.
  * \param input     The buffer holding the input data.
  *                  This pointer can be \c NULL if `size == 0`.
  * \param output    The buffer holding the output data.
  *                  This must be able to hold \p size Bytes.
  *                  This pointer can be \c NULL if `size == 0`.
  *
  * \return          \c 0 on success.
  * \return          A negative error code on failure.
  */
 int mbedtls_chacha20_crypt( const unsigned char key[32],
                             const unsigned char nonce[12],
                             uint32_t counter,
                             size_t size,
                             const unsigned char* input,
                             unsigned char* output );

 #if defined(MBEDTLS_SELF_TEST)
 /**
  * \brief           The ChaCha20 checkup routine.
  *
  * \return          \c 0 on success.
  * \return          \c 1 on failure.
  */
 int mbedtls_chacha20_self_test( int verbose );
 #endif /* MBEDTLS_SELF_TEST */

 #ifdef __cplusplus
 }
 #endif

 #endif /* MBEDTLS_CHACHA20_H */
	/**
	* \file chacha20.h
	*
	* \brief This file contains ChaCha20 definitions and functions.
	*
	* ChaCha20 is a stream cipher that can encrypt and decrypt
	* information. ChaCha was created by Daniel Bernstein as a variant of
	* its Salsa cipher https://cr.yp.to/chacha/chacha-20080128.pdf
	* ChaCha20 is the variant with 20 rounds, that was also standardized
	* in RFC 7539.
	*
	* \author Daniel King <damaki.gh@gmail.com>
	*/

	/* Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved.
	* SPDX-License-Identifier: Apache-2.0
	*
	* Licensed under the Apache License, Version 2.0 (the "License"); you may
	* not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
	* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*
	* This file is part of Mbed TLS (https://tls.mbed.org)
	*/

	#ifndef MBEDTLS_CHACHA20_H
	#define MBEDTLS_CHACHA20_H

	#if !defined(MBEDTLS_CONFIG_FILE)
	#include "config.h"
	#else
	#include MBEDTLS_CONFIG_FILE
	#endif

	#include <stdint.h>
	#include <stddef.h>

	#define MBEDTLS_ERR_CHACHA20_BAD_INPUT_DATA -0x0051 /*< Invalid input parameter(s). /

	/* MBEDTLS_ERR_CHACHA20_FEATURE_UNAVAILABLE is deprecated and should not be
	* used. */
	#define MBEDTLS_ERR_CHACHA20_FEATURE_UNAVAILABLE -0x0053 /*< Feature not available. For example, s part of the API is not implemented. /

	/* MBEDTLS_ERR_CHACHA20_HW_ACCEL_FAILED is deprecated and should not be used.
	*/
	#define MBEDTLS_ERR_CHACHA20_HW_ACCEL_FAILED -0x0055 /*< Chacha20 hardware accelerator failed. /

	#ifdef __cplusplus
	extern "C" {
	#endif

	#if !defined(MBEDTLS_CHACHA20_ALT)

	typedef struct mbedtls_chacha20_context
	{
	uint32_t state[16]; /! The state (before round operations). /
	uint8_t keystream8[64]; /! Leftover keystream bytes. /
	size_t keystream_bytes_used; /! Number of keystream bytes already used. /
	}
	mbedtls_chacha20_context;

	#else /* MBEDTLS_CHACHA20_ALT */
	#include "chacha20_alt.h"
	#endif /* MBEDTLS_CHACHA20_ALT */

	/**
	* \brief This function initializes the specified ChaCha20 context.
	*
	* It must be the first API called before using
	* the context.
	*
	* It is usually followed by calls to
	* \c mbedtls_chacha20_setkey() and
	* \c mbedtls_chacha20_starts(), then one or more calls to
	* to \c mbedtls_chacha20_update(), and finally to
	* \c mbedtls_chacha20_free().
	*
	* \param ctx The ChaCha20 context to initialize.
	* This must not be \c NULL.
	*/
	void mbedtls_chacha20_init( mbedtls_chacha20_context *ctx );

	/**
	* \brief This function releases and clears the specified
	* ChaCha20 context.
	*
	* \param ctx The ChaCha20 context to clear. This may be \c NULL,
	* in which case this function is a no-op. If it is not
	* \c NULL, it must point to an initialized context.
	*
	*/
	void mbedtls_chacha20_free( mbedtls_chacha20_context *ctx );

	/**
	* \brief This function sets the encryption/decryption key.
	*
	* \note After using this function, you must also call
	* \c mbedtls_chacha20_starts() to set a nonce before you
	* start encrypting/decrypting data with
	* \c mbedtls_chacha_update().
	*
	* \param ctx The ChaCha20 context to which the key should be bound.
	* It must be initialized.
	* \param key The encryption/decryption key. This must be \c 32 Bytes
	* in length.
	*
	* \return \c 0 on success.
	* \return #MBEDTLS_ERR_CHACHA20_BAD_INPUT_DATA if ctx or key is NULL.
	*/
	int mbedtls_chacha20_setkey( mbedtls_chacha20_context *ctx,
	const unsigned char key[32] );

	/**
	* \brief This function sets the nonce and initial counter value.
	*
	* \note A ChaCha20 context can be re-used with the same key by
	* calling this function to change the nonce.
	*
	* \warning You must never use the same nonce twice with the same key.
	* This would void any confidentiality guarantees for the
	* messages encrypted with the same nonce and key.
	*
	* \param ctx The ChaCha20 context to which the nonce should be bound.
	* It must be initialized and bound to a key.
	* \param nonce The nonce. This must be \c 12 Bytes in size.
	* \param counter The initial counter value. This is usually \c 0.
	*
	* \return \c 0 on success.
	* \return #MBEDTLS_ERR_CHACHA20_BAD_INPUT_DATA if ctx or nonce is
	* NULL.
	*/
	int mbedtls_chacha20_starts( mbedtls_chacha20_context* ctx,
	const unsigned char nonce[12],
	uint32_t counter );

	/**
	* \brief This function encrypts or decrypts data.
	*
	* Since ChaCha20 is a stream cipher, the same operation is
	* used for encrypting and decrypting data.
	*
	* \note The \p input and \p output pointers must either be equal or
	* point to non-overlapping buffers.
	*
	* \note \c mbedtls_chacha20_setkey() and
	* \c mbedtls_chacha20_starts() must be called at least once
	* to setup the context before this function can be called.
	*
	* \note This function can be called multiple times in a row in
	* order to encrypt of decrypt data piecewise with the same
	* key and nonce.
	*
	* \param ctx The ChaCha20 context to use for encryption or decryption.
	* It must be initialized and bound to a key and nonce.
	* \param size The length of the input data in Bytes.
	* \param input The buffer holding the input data.
	* This pointer can be \c NULL if `size == 0`.
	* \param output The buffer holding the output data.
	* This must be able to hold \p size Bytes.
	* This pointer can be \c NULL if `size == 0`.
	*
	* \return \c 0 on success.
	* \return A negative error code on failure.
	*/
	int mbedtls_chacha20_update( mbedtls_chacha20_context *ctx,
	size_t size,
	const unsigned char *input,
	unsigned char *output );

	/**
	* \brief This function encrypts or decrypts data with ChaCha20 and
	* the given key and nonce.
	*
	* Since ChaCha20 is a stream cipher, the same operation is
	* used for encrypting and decrypting data.
	*
	* \warning You must never use the same (key, nonce) pair more than
	* once. This would void any confidentiality guarantees for
	* the messages encrypted with the same nonce and key.
	*
	* \note The \p input and \p output pointers must either be equal or
	* point to non-overlapping buffers.
	*
	* \param key The encryption/decryption key.
	* This must be \c 32 Bytes in length.
	* \param nonce The nonce. This must be \c 12 Bytes in size.
	* \param counter The initial counter value. This is usually \c 0.
	* \param size The length of the input data in Bytes.
	* \param input The buffer holding the input data.
	* This pointer can be \c NULL if `size == 0`.
	* \param output The buffer holding the output data.
	* This must be able to hold \p size Bytes.
	* This pointer can be \c NULL if `size == 0`.
	*
	* \return \c 0 on success.
	* \return A negative error code on failure.
	*/
	int mbedtls_chacha20_crypt( const unsigned char key[32],
	const unsigned char nonce[12],
	uint32_t counter,
	size_t size,
	const unsigned char* input,
	unsigned char* output );

	#if defined(MBEDTLS_SELF_TEST)
	/**
	* \brief The ChaCha20 checkup routine.
	*
	* \return \c 0 on success.
	* \return \c 1 on failure.
	*/
	int mbedtls_chacha20_self_test( int verbose );
	#endif /* MBEDTLS_SELF_TEST */

	#ifdef __cplusplus
	}
	#endif

	#endif /* MBEDTLS_CHACHA20_H */