blob: 2f49aa91c9ef9c7ff8870b5764b2a00699716a89 [file] [log] [blame] [raw]
/*
* Hello world example of using the authenticated encryption with mbed TLS
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#include "mbedtls/cipher.h"
#include "mbedtls/entropy.h"
#include "mbedtls/ctr_drbg.h"
#include <stdio.h>
#include <string.h>
static void print_hex(const char *title, const unsigned char buf[], size_t len)
{
printf("%s: ", title);
for (size_t i = 0; i < len; i++)
printf("%02x", buf[i]);
printf("\r\n");
}
/*
* The pre-shared key. Should be generated randomly and be unique to the
* device/channel/etc. Just used a fixed on here for simplicity.
*/
static const unsigned char secret_key[16] = {
0xf4, 0x82, 0xc6, 0x70, 0x3c, 0xc7, 0x61, 0x0a,
0xb9, 0xa0, 0xb8, 0xe9, 0x87, 0xb8, 0xc1, 0x72,
};
static int example(void)
{
/* message that should be protected */
const char message[] = "Some things are better left unread";
/* metadata transmitted in the clear but authenticated */
const char metadata[] = "eg sequence number, routing info";
/* ciphertext buffer large enough to hold message + nonce + tag */
unsigned char ciphertext[128] = { 0 };
int ret;
printf("\r\n\r\n");
print_hex("plaintext message", (unsigned char *) message, sizeof message);
/*
* Setup random number generator
* (Note: later this might be done automatically.)
*/
mbedtls_entropy_context entropy; /* entropy pool for seeding PRNG */
mbedtls_ctr_drbg_context drbg; /* pseudo-random generator */
mbedtls_entropy_init(&entropy);
mbedtls_ctr_drbg_init(&drbg);
/* Seed the PRNG using the entropy pool, and throw in our secret key as an
* additional source of randomness. */
ret = mbedtls_ctr_drbg_seed(&drbg, mbedtls_entropy_func, &entropy,
secret_key, sizeof (secret_key));
if (ret != 0) {
printf("mbedtls_ctr_drbg_init() returned -0x%04X\r\n", -ret);
return 1;
}
/*
* Setup AES-CCM contex
*/
mbedtls_cipher_context_t ctx;
mbedtls_cipher_init(&ctx);
ret = mbedtls_cipher_setup(&ctx, mbedtls_cipher_info_from_type(MBEDTLS_CIPHER_AES_128_CCM));
if (ret != 0) {
printf("mbedtls_cipher_setup() returned -0x%04X\r\n", -ret);
return 1;
}
ret = mbedtls_cipher_setkey(&ctx, secret_key, 8 * sizeof secret_key, MBEDTLS_ENCRYPT);
if (ret != 0) {
printf("mbedtls_cipher_setkey() returned -0x%04X\r\n", -ret);
return 1;
}
/*
* Encrypt-authenticate the message and authenticate additional data
*
* First generate a random 8-byte nonce.
* Put it directly in the output buffer as the recipient will need it.
*
* Warning: you must never re-use the same (key, nonce) pair. One of the
* best ways to ensure this to use a counter for the nonce. However this
* means you should save the counter accross rebots, if the key is a
* long-term one. The alternative we choose here is to generate the nonce
* randomly. However it only works if you have a good source of
* randomness.
*/
const size_t nonce_len = 8;
mbedtls_ctr_drbg_random(&drbg, ciphertext, nonce_len);
size_t ciphertext_len = 0;
/* Go for a conservative 16-byte (128-bit) tag
* and append it to the ciphertext */
const size_t tag_len = 16;
ret = mbedtls_cipher_auth_encrypt(&ctx, ciphertext, nonce_len,
(const unsigned char *) metadata, sizeof metadata,
(const unsigned char *) message, sizeof message,
ciphertext + nonce_len, &ciphertext_len,
ciphertext + nonce_len + sizeof message, tag_len );
if (ret != 0) {
printf("mbedtls_cipher_auth_encrypt() returned -0x%04X\r\n", -ret);
return 1;
}
ciphertext_len += nonce_len + tag_len;
/*
* The following information should now be transmitted:
* - first ciphertext_len bytes of ciphertext buffer
* - metadata if not already transmitted elsewhere
*/
print_hex("ciphertext", ciphertext, ciphertext_len);
/*
* Decrypt-authenticate
*/
unsigned char decrypted[128] = { 0 };
size_t decrypted_len = 0;
ret = mbedtls_cipher_setkey(&ctx, secret_key, 8 * sizeof secret_key, MBEDTLS_DECRYPT);
if (ret != 0) {
printf("mbedtls_cipher_setkey() returned -0x%04X\r\n", -ret);
return 1;
}
ret = mbedtls_cipher_auth_decrypt(&ctx,
ciphertext, nonce_len,
(const unsigned char *) metadata, sizeof metadata,
ciphertext + nonce_len, ciphertext_len - nonce_len - tag_len,
decrypted, &decrypted_len,
ciphertext + ciphertext_len - tag_len, tag_len );
/* Checking the return code is CRITICAL for security here */
if (ret == MBEDTLS_ERR_CIPHER_AUTH_FAILED) {
printf("Something bad is happening! Data is not authentic!\r\n");
return 1;
}
if (ret != 0) {
printf("mbedtls_cipher_authdecrypt() returned -0x%04X\r\n", -ret);
return 1;
}
print_hex("decrypted", decrypted, decrypted_len);
printf("\r\nDONE\r\n");
return 0;
}
#if defined(TARGET_LIKE_MBED)
#include "mbed/test_env.h"
#include "minar/minar.h"
static void run() {
/* Use 115200 bps for consistency with other examples */
Serial pc(USBTX, USBRX);
pc.baud(115200);
MBED_HOSTTEST_TIMEOUT(10);
MBED_HOSTTEST_SELECT(default);
MBED_HOSTTEST_DESCRIPTION(mbed TLS example authcrypt);
MBED_HOSTTEST_START("MBEDTLS_EX_AUTHCRYPT");
MBED_HOSTTEST_RESULT(example() == 0);
}
void app_start(int, char*[]) {
minar::Scheduler::postCallback(FunctionPointer0<void>(run).bind());
}
#else
int main() {
return example();
}
#endif