| #!/bin/sh |
| |
| # Test various options that are not covered by compat.sh |
| # |
| # Here the goal is not to cover every ciphersuite/version, but |
| # rather specific options (max fragment length, truncated hmac, etc) |
| # or procedures (session resumption from cache or ticket, renego, etc). |
| # |
| # Assumes all options are compiled in. |
| |
| set -u |
| |
| # default values, can be overriden by the environment |
| : ${P_SRV:=../programs/ssl/ssl_server2} |
| : ${P_CLI:=../programs/ssl/ssl_client2} |
| : ${OPENSSL_CMD:=openssl} # OPENSSL would conflict with the build system |
| : ${GNUTLS_CLI:=gnutls-cli} |
| : ${GNUTLS_SERV:=gnutls-serv} |
| |
| O_SRV="$OPENSSL_CMD s_server -www -cert data_files/server5.crt -key data_files/server5.key" |
| O_CLI="echo 'GET / HTTP/1.0' | $OPENSSL_CMD s_client" |
| G_SRV="$GNUTLS_SERV --x509certfile data_files/server5.crt --x509keyfile data_files/server5.key" |
| G_CLI="echo 'GET / HTTP/1.0' | $GNUTLS_CLI --x509cafile data_files/test-ca_cat12.crt" |
| |
| TESTS=0 |
| FAILS=0 |
| SKIPS=0 |
| |
| CONFIG_H='../include/polarssl/config.h' |
| |
| MEMCHECK=0 |
| FILTER='.*' |
| EXCLUDE='^$' |
| |
| print_usage() { |
| echo "Usage: $0 [options]" |
| printf " -h|--help\tPrint this help.\n" |
| printf " -m|--memcheck\tCheck memory leaks and errors.\n" |
| printf " -f|--filter\tOnly matching tests are executed (default: '$FILTER')\n" |
| printf " -e|--exclude\tMatching tests are excluded (default: '$EXCLUDE')\n" |
| } |
| |
| get_options() { |
| while [ $# -gt 0 ]; do |
| case "$1" in |
| -f|--filter) |
| shift; FILTER=$1 |
| ;; |
| -e|--exclude) |
| shift; EXCLUDE=$1 |
| ;; |
| -m|--memcheck) |
| MEMCHECK=1 |
| ;; |
| -h|--help) |
| print_usage |
| exit 0 |
| ;; |
| *) |
| echo "Unknown argument: '$1'" |
| print_usage |
| exit 1 |
| ;; |
| esac |
| shift |
| done |
| } |
| |
| # skip next test if OpenSSL can't send SSLv2 ClientHello |
| requires_openssl_with_sslv2() { |
| if [ -z "${OPENSSL_HAS_SSL2:-}" ]; then |
| if $OPENSSL_CMD ciphers -ssl2 >/dev/null 2>&1; then |
| OPENSSL_HAS_SSL2="YES" |
| else |
| OPENSSL_HAS_SSL2="NO" |
| fi |
| fi |
| if [ "$OPENSSL_HAS_SSL2" = "NO" ]; then |
| SKIP_NEXT="YES" |
| fi |
| } |
| |
| # skip next test if OpenSSL doesn't support FALLBACK_SCSV |
| requires_openssl_with_fallback_scsv() { |
| if [ -z "${OPENSSL_HAS_FBSCSV:-}" ]; then |
| if $OPENSSL_CMD s_client -help 2>&1 | grep fallback_scsv >/dev/null |
| then |
| OPENSSL_HAS_FBSCSV="YES" |
| else |
| OPENSSL_HAS_FBSCSV="NO" |
| fi |
| fi |
| if [ "$OPENSSL_HAS_FBSCSV" = "NO" ]; then |
| SKIP_NEXT="YES" |
| fi |
| } |
| |
| # skip next test if GnuTLS isn't available |
| requires_gnutls() { |
| if [ -z "${GNUTLS_AVAILABLE:-}" ]; then |
| if ( which "$GNUTLS_CLI" && which "$GNUTLS_SERV" ) >/dev/null; then |
| GNUTLS_AVAILABLE="YES" |
| else |
| GNUTLS_AVAILABLE="NO" |
| fi |
| fi |
| if [ "$GNUTLS_AVAILABLE" = "NO" ]; then |
| SKIP_NEXT="YES" |
| fi |
| } |
| |
| # print_name <name> |
| print_name() { |
| printf "$1 " |
| LEN=$(( 72 - `echo "$1" | wc -c` )) |
| for i in `seq 1 $LEN`; do printf '.'; done |
| printf ' ' |
| |
| TESTS=$(( $TESTS + 1 )) |
| } |
| |
| # fail <message> |
| fail() { |
| echo "FAIL" |
| echo " ! $1" |
| |
| mv $SRV_OUT o-srv-${TESTS}.log |
| mv $CLI_OUT o-cli-${TESTS}.log |
| echo " ! outputs saved to o-srv-${TESTS}.log and o-cli-${TESTS}.log" |
| |
| if [ "X${USER:-}" = Xbuildbot -o "X${LOGNAME:-}" = Xbuildbot ]; then |
| echo " ! server output:" |
| cat o-srv-${TESTS}.log |
| echo " ! ============================================================" |
| echo " ! client output:" |
| cat o-cli-${TESTS}.log |
| fi |
| |
| FAILS=$(( $FAILS + 1 )) |
| } |
| |
| # is_polar <cmd_line> |
| is_polar() { |
| echo "$1" | grep 'ssl_server2\|ssl_client2' > /dev/null |
| } |
| |
| # has_mem_err <log_file_name> |
| has_mem_err() { |
| if ( grep -F 'All heap blocks were freed -- no leaks are possible' "$1" && |
| grep -F 'ERROR SUMMARY: 0 errors from 0 contexts' "$1" ) > /dev/null |
| then |
| return 1 # false: does not have errors |
| else |
| return 0 # true: has errors |
| fi |
| } |
| |
| # wait for server to start: two versions depending on lsof availability |
| wait_server_start() { |
| if which lsof >/dev/null; then |
| # make sure we don't loop forever |
| ( sleep "$DOG_DELAY"; echo "SERVERSTART TIMEOUT"; kill $MAIN_PID ) & |
| WATCHDOG_PID=$! |
| |
| # make a tight loop, server usually takes less than 1 sec to start |
| until lsof -nbi TCP:"$PORT" 2>/dev/null | grep LISTEN >/dev/null; |
| do :; done |
| |
| kill $WATCHDOG_PID |
| wait $WATCHDOG_PID |
| else |
| sleep "$START_DELAY" |
| fi |
| } |
| |
| # wait for client to terminate and set CLI_EXIT |
| # must be called right after starting the client |
| wait_client_done() { |
| CLI_PID=$! |
| |
| ( sleep "$DOG_DELAY"; echo "TIMEOUT" >> $CLI_OUT; kill $CLI_PID ) & |
| WATCHDOG_PID=$! |
| |
| wait $CLI_PID |
| CLI_EXIT=$? |
| |
| kill $WATCHDOG_PID |
| wait $WATCHDOG_PID |
| |
| echo "EXIT: $CLI_EXIT" >> $CLI_OUT |
| } |
| |
| # Usage: run_test name srv_cmd cli_cmd cli_exit [option [...]] |
| # Options: -s pattern pattern that must be present in server output |
| # -c pattern pattern that must be present in client output |
| # -S pattern pattern that must be absent in server output |
| # -C pattern pattern that must be absent in client output |
| run_test() { |
| NAME="$1" |
| SRV_CMD="$2" |
| CLI_CMD="$3" |
| CLI_EXPECT="$4" |
| shift 4 |
| |
| if echo "$NAME" | grep "$FILTER" | grep -v "$EXCLUDE" >/dev/null; then : |
| else |
| return |
| fi |
| |
| print_name "$NAME" |
| |
| # should we skip? |
| if [ "X$SKIP_NEXT" = "XYES" ]; then |
| SKIP_NEXT="NO" |
| echo "SKIP" |
| SKIPS=$(( $SKIPS + 1 )) |
| return |
| fi |
| |
| # prepend valgrind to our commands if active |
| if [ "$MEMCHECK" -gt 0 ]; then |
| if is_polar "$SRV_CMD"; then |
| SRV_CMD="valgrind --leak-check=full $SRV_CMD" |
| fi |
| if is_polar "$CLI_CMD"; then |
| CLI_CMD="valgrind --leak-check=full $CLI_CMD" |
| fi |
| fi |
| |
| # run the commands |
| echo "$SRV_CMD" > $SRV_OUT |
| $SRV_CMD >> $SRV_OUT 2>&1 & |
| SRV_PID=$! |
| wait_server_start |
| |
| echo "$CLI_CMD" > $CLI_OUT |
| eval "$CLI_CMD" >> $CLI_OUT 2>&1 & |
| wait_client_done |
| |
| # kill the server |
| kill $SRV_PID |
| wait $SRV_PID |
| |
| # check if the client and server went at least to the handshake stage |
| # (useful to avoid tests with only negative assertions and non-zero |
| # expected client exit to incorrectly succeed in case of catastrophic |
| # failure) |
| if is_polar "$SRV_CMD"; then |
| if grep "Performing the SSL/TLS handshake" $SRV_OUT >/dev/null; then :; |
| else |
| fail "server or client failed to reach handshake stage" |
| return |
| fi |
| fi |
| if is_polar "$CLI_CMD"; then |
| if grep "Performing the SSL/TLS handshake" $CLI_OUT >/dev/null; then :; |
| else |
| fail "server or client failed to reach handshake stage" |
| return |
| fi |
| fi |
| |
| # check server exit code |
| if [ $? != 0 ]; then |
| fail "server fail" |
| return |
| fi |
| |
| # check client exit code |
| if [ \( "$CLI_EXPECT" = 0 -a "$CLI_EXIT" != 0 \) -o \ |
| \( "$CLI_EXPECT" != 0 -a "$CLI_EXIT" = 0 \) ] |
| then |
| fail "bad client exit code" |
| return |
| fi |
| |
| # check other assertions |
| # lines beginning with == are added by valgrind, ignore them |
| while [ $# -gt 0 ] |
| do |
| case $1 in |
| "-s") |
| if grep -v '^==' $SRV_OUT | grep "$2" >/dev/null; then :; else |
| fail "-s $2" |
| return |
| fi |
| ;; |
| |
| "-c") |
| if grep -v '^==' $CLI_OUT | grep "$2" >/dev/null; then :; else |
| fail "-c $2" |
| return |
| fi |
| ;; |
| |
| "-S") |
| if grep -v '^==' $SRV_OUT | grep "$2" >/dev/null; then |
| fail "-S $2" |
| return |
| fi |
| ;; |
| |
| "-C") |
| if grep -v '^==' $CLI_OUT | grep "$2" >/dev/null; then |
| fail "-C $2" |
| return |
| fi |
| ;; |
| |
| *) |
| echo "Unknown test: $1" >&2 |
| exit 1 |
| esac |
| shift 2 |
| done |
| |
| # check valgrind's results |
| if [ "$MEMCHECK" -gt 0 ]; then |
| if is_polar "$SRV_CMD" && has_mem_err $SRV_OUT; then |
| fail "Server has memory errors" |
| return |
| fi |
| if is_polar "$CLI_CMD" && has_mem_err $CLI_OUT; then |
| fail "Client has memory errors" |
| return |
| fi |
| fi |
| |
| # if we're here, everything is ok |
| echo "PASS" |
| rm -f $SRV_OUT $CLI_OUT |
| } |
| |
| cleanup() { |
| rm -f $CLI_OUT $SRV_OUT $SESSION |
| kill $SRV_PID >/dev/null 2>&1 |
| kill $WATCHDOG_PID >/dev/null 2>&1 |
| exit 1 |
| } |
| |
| # |
| # MAIN |
| # |
| |
| get_options "$@" |
| |
| # sanity checks, avoid an avalanche of errors |
| if [ ! -x "$P_SRV" ]; then |
| echo "Command '$P_SRV' is not an executable file" |
| exit 1 |
| fi |
| if [ ! -x "$P_CLI" ]; then |
| echo "Command '$P_CLI' is not an executable file" |
| exit 1 |
| fi |
| if which $OPENSSL_CMD >/dev/null 2>&1; then :; else |
| echo "Command '$OPENSSL_CMD' not found" |
| exit 1 |
| fi |
| |
| # used by watchdog |
| MAIN_PID="$$" |
| |
| # be more patient with valgrind |
| if [ "$MEMCHECK" -gt 0 ]; then |
| START_DELAY=3 |
| DOG_DELAY=30 |
| else |
| START_DELAY=1 |
| DOG_DELAY=10 |
| fi |
| |
| # Pick a "unique" port in the range 10000-19999. |
| PORT="0000$$" |
| PORT="1$( printf $PORT | tail -c 4 )" |
| |
| # fix commands to use this port |
| P_SRV="$P_SRV server_port=$PORT" |
| P_CLI="$P_CLI server_port=$PORT" |
| O_SRV="$O_SRV -accept $PORT" |
| O_CLI="$O_CLI -connect localhost:$PORT" |
| G_SRV="$G_SRV -p $PORT" |
| G_CLI="$G_CLI -p $PORT localhost" |
| |
| # Also pick a unique name for intermediate files |
| SRV_OUT="srv_out.$$" |
| CLI_OUT="cli_out.$$" |
| SESSION="session.$$" |
| |
| SKIP_NEXT="NO" |
| |
| trap cleanup INT TERM HUP |
| |
| # Basic test |
| |
| # Checks that: |
| # - things work with all ciphersuites active (used with config-full in all.sh) |
| # - the expected (highest security) parameters are selected |
| # ("signature_algorithm ext: 6" means SHA-512 (highest common hash)) |
| run_test "Default" \ |
| "$P_SRV debug_level=3" \ |
| "$P_CLI" \ |
| 0 \ |
| -s "Protocol is TLSv1.2" \ |
| -s "Ciphersuite is TLS-ECDHE-ECDSA-WITH-AES-256-GCM-SHA384" \ |
| -s "client hello v3, signature_algorithm ext: 6" \ |
| -s "ECDHE curve: secp521r1" \ |
| -S "error" \ |
| -C "error" |
| |
| # Tests for rc4 option |
| |
| run_test "RC4: server disabled, client enabled" \ |
| "$P_SRV" \ |
| "$P_CLI force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \ |
| 1 \ |
| -s "SSL - None of the common ciphersuites is usable" |
| |
| run_test "RC4: server enabled, client disabled" \ |
| "$P_SRV force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \ |
| "$P_CLI" \ |
| 1 \ |
| -s "SSL - The server has no ciphersuites in common" |
| |
| run_test "RC4: both enabled" \ |
| "$P_SRV arc4=1" \ |
| "$P_CLI force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \ |
| 0 \ |
| -S "SSL - None of the common ciphersuites is usable" \ |
| -S "SSL - The server has no ciphersuites in common" |
| |
| # Test for SSLv2 ClientHello |
| |
| requires_openssl_with_sslv2 |
| run_test "SSLv2 ClientHello: reference" \ |
| "$P_SRV debug_level=3" \ |
| "$O_CLI -no_ssl2" \ |
| 0 \ |
| -S "parse client hello v2" \ |
| -S "ssl_handshake returned" |
| |
| # Adding a SSL2-only suite makes OpenSSL client send SSLv2 ClientHello |
| requires_openssl_with_sslv2 |
| run_test "SSLv2 ClientHello: actual test" \ |
| "$P_SRV debug_level=2" \ |
| "$O_CLI -cipher 'DES-CBC-MD5:ALL'" \ |
| 0 \ |
| -s "parse client hello v2" \ |
| -S "ssl_handshake returned" |
| |
| # Tests for Truncated HMAC extension |
| |
| run_test "Truncated HMAC: client default, server default" \ |
| "$P_SRV debug_level=4" \ |
| "$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \ |
| 0 \ |
| -s "dumping 'computed mac' (20 bytes)" \ |
| -S "dumping 'computed mac' (10 bytes)" |
| |
| run_test "Truncated HMAC: client disabled, server default" \ |
| "$P_SRV debug_level=4" \ |
| "$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \ |
| trunc_hmac=0" \ |
| 0 \ |
| -s "dumping 'computed mac' (20 bytes)" \ |
| -S "dumping 'computed mac' (10 bytes)" |
| |
| run_test "Truncated HMAC: client enabled, server default" \ |
| "$P_SRV debug_level=4" \ |
| "$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \ |
| trunc_hmac=1" \ |
| 0 \ |
| -S "dumping 'computed mac' (20 bytes)" \ |
| -s "dumping 'computed mac' (10 bytes)" |
| |
| run_test "Truncated HMAC: client enabled, server disabled" \ |
| "$P_SRV debug_level=4 trunc_hmac=0" \ |
| "$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \ |
| trunc_hmac=1" \ |
| 0 \ |
| -s "dumping 'computed mac' (20 bytes)" \ |
| -S "dumping 'computed mac' (10 bytes)" |
| |
| run_test "Truncated HMAC: client enabled, server enabled" \ |
| "$P_SRV debug_level=4 trunc_hmac=1" \ |
| "$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \ |
| trunc_hmac=1" \ |
| 0 \ |
| -S "dumping 'computed mac' (20 bytes)" \ |
| -s "dumping 'computed mac' (10 bytes)" |
| |
| # Tests for Encrypt-then-MAC extension |
| |
| run_test "Encrypt then MAC: default" \ |
| "$P_SRV debug_level=3 \ |
| force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \ |
| "$P_CLI debug_level=3" \ |
| 0 \ |
| -c "client hello, adding encrypt_then_mac extension" \ |
| -s "found encrypt then mac extension" \ |
| -s "server hello, adding encrypt then mac extension" \ |
| -c "found encrypt_then_mac extension" \ |
| -c "using encrypt then mac" \ |
| -s "using encrypt then mac" |
| |
| run_test "Encrypt then MAC: client enabled, server disabled" \ |
| "$P_SRV debug_level=3 etm=0 \ |
| force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \ |
| "$P_CLI debug_level=3 etm=1" \ |
| 0 \ |
| -c "client hello, adding encrypt_then_mac extension" \ |
| -s "found encrypt then mac extension" \ |
| -S "server hello, adding encrypt then mac extension" \ |
| -C "found encrypt_then_mac extension" \ |
| -C "using encrypt then mac" \ |
| -S "using encrypt then mac" |
| |
| run_test "Encrypt then MAC: client enabled, aead cipher" \ |
| "$P_SRV debug_level=3 etm=1 \ |
| force_ciphersuite=TLS-RSA-WITH-AES-128-GCM-SHA256" \ |
| "$P_CLI debug_level=3 etm=1" \ |
| 0 \ |
| -c "client hello, adding encrypt_then_mac extension" \ |
| -s "found encrypt then mac extension" \ |
| -S "server hello, adding encrypt then mac extension" \ |
| -C "found encrypt_then_mac extension" \ |
| -C "using encrypt then mac" \ |
| -S "using encrypt then mac" |
| |
| run_test "Encrypt then MAC: client enabled, stream cipher" \ |
| "$P_SRV debug_level=3 etm=1 \ |
| force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \ |
| "$P_CLI debug_level=3 etm=1 arc4=1" \ |
| 0 \ |
| -c "client hello, adding encrypt_then_mac extension" \ |
| -s "found encrypt then mac extension" \ |
| -S "server hello, adding encrypt then mac extension" \ |
| -C "found encrypt_then_mac extension" \ |
| -C "using encrypt then mac" \ |
| -S "using encrypt then mac" |
| |
| run_test "Encrypt then MAC: client disabled, server enabled" \ |
| "$P_SRV debug_level=3 etm=1 \ |
| force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \ |
| "$P_CLI debug_level=3 etm=0" \ |
| 0 \ |
| -C "client hello, adding encrypt_then_mac extension" \ |
| -S "found encrypt then mac extension" \ |
| -S "server hello, adding encrypt then mac extension" \ |
| -C "found encrypt_then_mac extension" \ |
| -C "using encrypt then mac" \ |
| -S "using encrypt then mac" |
| |
| run_test "Encrypt then MAC: client SSLv3, server enabled" \ |
| "$P_SRV debug_level=3 min_version=ssl3 \ |
| force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \ |
| "$P_CLI debug_level=3 force_version=ssl3" \ |
| 0 \ |
| -C "client hello, adding encrypt_then_mac extension" \ |
| -S "found encrypt then mac extension" \ |
| -S "server hello, adding encrypt then mac extension" \ |
| -C "found encrypt_then_mac extension" \ |
| -C "using encrypt then mac" \ |
| -S "using encrypt then mac" |
| |
| run_test "Encrypt then MAC: client enabled, server SSLv3" \ |
| "$P_SRV debug_level=3 force_version=ssl3 \ |
| force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \ |
| "$P_CLI debug_level=3 min_version=ssl3" \ |
| 0 \ |
| -c "client hello, adding encrypt_then_mac extension" \ |
| -s "found encrypt then mac extension" \ |
| -S "server hello, adding encrypt then mac extension" \ |
| -C "found encrypt_then_mac extension" \ |
| -C "using encrypt then mac" \ |
| -S "using encrypt then mac" |
| |
| # Tests for Extended Master Secret extension |
| |
| run_test "Extended Master Secret: default" \ |
| "$P_SRV debug_level=3" \ |
| "$P_CLI debug_level=3" \ |
| 0 \ |
| -c "client hello, adding extended_master_secret extension" \ |
| -s "found extended master secret extension" \ |
| -s "server hello, adding extended master secret extension" \ |
| -c "found extended_master_secret extension" \ |
| -c "using extended master secret" \ |
| -s "using extended master secret" |
| |
| run_test "Extended Master Secret: client enabled, server disabled" \ |
| "$P_SRV debug_level=3 extended_ms=0" \ |
| "$P_CLI debug_level=3 extended_ms=1" \ |
| 0 \ |
| -c "client hello, adding extended_master_secret extension" \ |
| -s "found extended master secret extension" \ |
| -S "server hello, adding extended master secret extension" \ |
| -C "found extended_master_secret extension" \ |
| -C "using extended master secret" \ |
| -S "using extended master secret" |
| |
| run_test "Extended Master Secret: client disabled, server enabled" \ |
| "$P_SRV debug_level=3 extended_ms=1" \ |
| "$P_CLI debug_level=3 extended_ms=0" \ |
| 0 \ |
| -C "client hello, adding extended_master_secret extension" \ |
| -S "found extended master secret extension" \ |
| -S "server hello, adding extended master secret extension" \ |
| -C "found extended_master_secret extension" \ |
| -C "using extended master secret" \ |
| -S "using extended master secret" |
| |
| run_test "Extended Master Secret: client SSLv3, server enabled" \ |
| "$P_SRV debug_level=3 min_version=ssl3" \ |
| "$P_CLI debug_level=3 force_version=ssl3" \ |
| 0 \ |
| -C "client hello, adding extended_master_secret extension" \ |
| -S "found extended master secret extension" \ |
| -S "server hello, adding extended master secret extension" \ |
| -C "found extended_master_secret extension" \ |
| -C "using extended master secret" \ |
| -S "using extended master secret" |
| |
| run_test "Extended Master Secret: client enabled, server SSLv3" \ |
| "$P_SRV debug_level=3 force_version=ssl3" \ |
| "$P_CLI debug_level=3 min_version=ssl3" \ |
| 0 \ |
| -c "client hello, adding extended_master_secret extension" \ |
| -s "found extended master secret extension" \ |
| -S "server hello, adding extended master secret extension" \ |
| -C "found extended_master_secret extension" \ |
| -C "using extended master secret" \ |
| -S "using extended master secret" |
| |
| # Tests for FALLBACK_SCSV |
| |
| run_test "Fallback SCSV: default" \ |
| "$P_SRV" \ |
| "$P_CLI debug_level=3 force_version=tls1_1" \ |
| 0 \ |
| -C "adding FALLBACK_SCSV" \ |
| -S "received FALLBACK_SCSV" \ |
| -S "inapropriate fallback" \ |
| -C "is a fatal alert message (msg 86)" |
| |
| run_test "Fallback SCSV: explicitly disabled" \ |
| "$P_SRV" \ |
| "$P_CLI debug_level=3 force_version=tls1_1 fallback=0" \ |
| 0 \ |
| -C "adding FALLBACK_SCSV" \ |
| -S "received FALLBACK_SCSV" \ |
| -S "inapropriate fallback" \ |
| -C "is a fatal alert message (msg 86)" |
| |
| run_test "Fallback SCSV: enabled" \ |
| "$P_SRV" \ |
| "$P_CLI debug_level=3 force_version=tls1_1 fallback=1" \ |
| 1 \ |
| -c "adding FALLBACK_SCSV" \ |
| -s "received FALLBACK_SCSV" \ |
| -s "inapropriate fallback" \ |
| -c "is a fatal alert message (msg 86)" |
| |
| run_test "Fallback SCSV: enabled, max version" \ |
| "$P_SRV" \ |
| "$P_CLI debug_level=3 fallback=1" \ |
| 0 \ |
| -c "adding FALLBACK_SCSV" \ |
| -s "received FALLBACK_SCSV" \ |
| -S "inapropriate fallback" \ |
| -C "is a fatal alert message (msg 86)" |
| |
| requires_openssl_with_fallback_scsv |
| run_test "Fallback SCSV: default, openssl server" \ |
| "$O_SRV" \ |
| "$P_CLI debug_level=3 force_version=tls1_1 fallback=0" \ |
| 0 \ |
| -C "adding FALLBACK_SCSV" \ |
| -C "is a fatal alert message (msg 86)" |
| |
| requires_openssl_with_fallback_scsv |
| run_test "Fallback SCSV: enabled, openssl server" \ |
| "$O_SRV" \ |
| "$P_CLI debug_level=3 force_version=tls1_1 fallback=1" \ |
| 1 \ |
| -c "adding FALLBACK_SCSV" \ |
| -c "is a fatal alert message (msg 86)" |
| |
| requires_openssl_with_fallback_scsv |
| run_test "Fallback SCSV: disabled, openssl client" \ |
| "$P_SRV" \ |
| "$O_CLI -tls1_1" \ |
| 0 \ |
| -S "received FALLBACK_SCSV" \ |
| -S "inapropriate fallback" |
| |
| requires_openssl_with_fallback_scsv |
| run_test "Fallback SCSV: enabled, openssl client" \ |
| "$P_SRV" \ |
| "$O_CLI -tls1_1 -fallback_scsv" \ |
| 1 \ |
| -s "received FALLBACK_SCSV" \ |
| -s "inapropriate fallback" |
| |
| requires_openssl_with_fallback_scsv |
| run_test "Fallback SCSV: enabled, max version, openssl client" \ |
| "$P_SRV" \ |
| "$O_CLI -fallback_scsv" \ |
| 0 \ |
| -s "received FALLBACK_SCSV" \ |
| -S "inapropriate fallback" |
| |
| # Tests for CBC 1/n-1 record splitting |
| |
| run_test "CBC Record splitting: TLS 1.2, no splitting" \ |
| "$P_SRV" \ |
| "$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \ |
| request_size=123 force_version=tls1_2" \ |
| 0 \ |
| -s "Read from client: 123 bytes read" \ |
| -S "Read from client: 1 bytes read" \ |
| -S "122 bytes read" |
| |
| run_test "CBC Record splitting: TLS 1.1, no splitting" \ |
| "$P_SRV" \ |
| "$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \ |
| request_size=123 force_version=tls1_1" \ |
| 0 \ |
| -s "Read from client: 123 bytes read" \ |
| -S "Read from client: 1 bytes read" \ |
| -S "122 bytes read" |
| |
| run_test "CBC Record splitting: TLS 1.0, splitting" \ |
| "$P_SRV" \ |
| "$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \ |
| request_size=123 force_version=tls1" \ |
| 0 \ |
| -S "Read from client: 123 bytes read" \ |
| -s "Read from client: 1 bytes read" \ |
| -s "122 bytes read" |
| |
| run_test "CBC Record splitting: SSLv3, splitting" \ |
| "$P_SRV min_version=ssl3" \ |
| "$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \ |
| request_size=123 force_version=ssl3" \ |
| 0 \ |
| -S "Read from client: 123 bytes read" \ |
| -s "Read from client: 1 bytes read" \ |
| -s "122 bytes read" |
| |
| run_test "CBC Record splitting: TLS 1.0 RC4, no splitting" \ |
| "$P_SRV arc4=1" \ |
| "$P_CLI force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \ |
| request_size=123 force_version=tls1" \ |
| 0 \ |
| -s "Read from client: 123 bytes read" \ |
| -S "Read from client: 1 bytes read" \ |
| -S "122 bytes read" |
| |
| run_test "CBC Record splitting: TLS 1.0, splitting disabled" \ |
| "$P_SRV" \ |
| "$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \ |
| request_size=123 force_version=tls1 recsplit=0" \ |
| 0 \ |
| -s "Read from client: 123 bytes read" \ |
| -S "Read from client: 1 bytes read" \ |
| -S "122 bytes read" |
| |
| run_test "CBC Record splitting: TLS 1.0, splitting, nbio" \ |
| "$P_SRV nbio=2" \ |
| "$P_CLI nbio=2 force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \ |
| request_size=123 force_version=tls1" \ |
| 0 \ |
| -S "Read from client: 123 bytes read" \ |
| -s "Read from client: 1 bytes read" \ |
| -s "122 bytes read" |
| |
| # Tests for Session Tickets |
| |
| run_test "Session resume using tickets: basic" \ |
| "$P_SRV debug_level=3 tickets=1" \ |
| "$P_CLI debug_level=3 tickets=1 reconnect=1" \ |
| 0 \ |
| -c "client hello, adding session ticket extension" \ |
| -s "found session ticket extension" \ |
| -s "server hello, adding session ticket extension" \ |
| -c "found session_ticket extension" \ |
| -c "parse new session ticket" \ |
| -S "session successfully restored from cache" \ |
| -s "session successfully restored from ticket" \ |
| -s "a session has been resumed" \ |
| -c "a session has been resumed" |
| |
| run_test "Session resume using tickets: cache disabled" \ |
| "$P_SRV debug_level=3 tickets=1 cache_max=0" \ |
| "$P_CLI debug_level=3 tickets=1 reconnect=1" \ |
| 0 \ |
| -c "client hello, adding session ticket extension" \ |
| -s "found session ticket extension" \ |
| -s "server hello, adding session ticket extension" \ |
| -c "found session_ticket extension" \ |
| -c "parse new session ticket" \ |
| -S "session successfully restored from cache" \ |
| -s "session successfully restored from ticket" \ |
| -s "a session has been resumed" \ |
| -c "a session has been resumed" |
| |
| run_test "Session resume using tickets: timeout" \ |
| "$P_SRV debug_level=3 tickets=1 cache_max=0 ticket_timeout=1" \ |
| "$P_CLI debug_level=3 tickets=1 reconnect=1 reco_delay=2" \ |
| 0 \ |
| -c "client hello, adding session ticket extension" \ |
| -s "found session ticket extension" \ |
| -s "server hello, adding session ticket extension" \ |
| -c "found session_ticket extension" \ |
| -c "parse new session ticket" \ |
| -S "session successfully restored from cache" \ |
| -S "session successfully restored from ticket" \ |
| -S "a session has been resumed" \ |
| -C "a session has been resumed" |
| |
| run_test "Session resume using tickets: openssl server" \ |
| "$O_SRV" \ |
| "$P_CLI debug_level=3 tickets=1 reconnect=1" \ |
| 0 \ |
| -c "client hello, adding session ticket extension" \ |
| -c "found session_ticket extension" \ |
| -c "parse new session ticket" \ |
| -c "a session has been resumed" |
| |
| run_test "Session resume using tickets: openssl client" \ |
| "$P_SRV debug_level=3 tickets=1" \ |
| "( $O_CLI -sess_out $SESSION; \ |
| $O_CLI -sess_in $SESSION; \ |
| rm -f $SESSION )" \ |
| 0 \ |
| -s "found session ticket extension" \ |
| -s "server hello, adding session ticket extension" \ |
| -S "session successfully restored from cache" \ |
| -s "session successfully restored from ticket" \ |
| -s "a session has been resumed" |
| |
| # Tests for Session Resume based on session-ID and cache |
| |
| run_test "Session resume using cache: tickets enabled on client" \ |
| "$P_SRV debug_level=3 tickets=0" \ |
| "$P_CLI debug_level=3 tickets=1 reconnect=1" \ |
| 0 \ |
| -c "client hello, adding session ticket extension" \ |
| -s "found session ticket extension" \ |
| -S "server hello, adding session ticket extension" \ |
| -C "found session_ticket extension" \ |
| -C "parse new session ticket" \ |
| -s "session successfully restored from cache" \ |
| -S "session successfully restored from ticket" \ |
| -s "a session has been resumed" \ |
| -c "a session has been resumed" |
| |
| run_test "Session resume using cache: tickets enabled on server" \ |
| "$P_SRV debug_level=3 tickets=1" \ |
| "$P_CLI debug_level=3 tickets=0 reconnect=1" \ |
| 0 \ |
| -C "client hello, adding session ticket extension" \ |
| -S "found session ticket extension" \ |
| -S "server hello, adding session ticket extension" \ |
| -C "found session_ticket extension" \ |
| -C "parse new session ticket" \ |
| -s "session successfully restored from cache" \ |
| -S "session successfully restored from ticket" \ |
| -s "a session has been resumed" \ |
| -c "a session has been resumed" |
| |
| run_test "Session resume using cache: cache_max=0" \ |
| "$P_SRV debug_level=3 tickets=0 cache_max=0" \ |
| "$P_CLI debug_level=3 tickets=0 reconnect=1" \ |
| 0 \ |
| -S "session successfully restored from cache" \ |
| -S "session successfully restored from ticket" \ |
| -S "a session has been resumed" \ |
| -C "a session has been resumed" |
| |
| run_test "Session resume using cache: cache_max=1" \ |
| "$P_SRV debug_level=3 tickets=0 cache_max=1" \ |
| "$P_CLI debug_level=3 tickets=0 reconnect=1" \ |
| 0 \ |
| -s "session successfully restored from cache" \ |
| -S "session successfully restored from ticket" \ |
| -s "a session has been resumed" \ |
| -c "a session has been resumed" |
| |
| run_test "Session resume using cache: timemout > delay" \ |
| "$P_SRV debug_level=3 tickets=0" \ |
| "$P_CLI debug_level=3 tickets=0 reconnect=1 reco_delay=0" \ |
| 0 \ |
| -s "session successfully restored from cache" \ |
| -S "session successfully restored from ticket" \ |
| -s "a session has been resumed" \ |
| -c "a session has been resumed" |
| |
| run_test "Session resume using cache: timeout < delay" \ |
| "$P_SRV debug_level=3 tickets=0 cache_timeout=1" \ |
| "$P_CLI debug_level=3 tickets=0 reconnect=1 reco_delay=2" \ |
| 0 \ |
| -S "session successfully restored from cache" \ |
| -S "session successfully restored from ticket" \ |
| -S "a session has been resumed" \ |
| -C "a session has been resumed" |
| |
| run_test "Session resume using cache: no timeout" \ |
| "$P_SRV debug_level=3 tickets=0 cache_timeout=0" \ |
| "$P_CLI debug_level=3 tickets=0 reconnect=1 reco_delay=2" \ |
| 0 \ |
| -s "session successfully restored from cache" \ |
| -S "session successfully restored from ticket" \ |
| -s "a session has been resumed" \ |
| -c "a session has been resumed" |
| |
| run_test "Session resume using cache: openssl client" \ |
| "$P_SRV debug_level=3 tickets=0" \ |
| "( $O_CLI -sess_out $SESSION; \ |
| $O_CLI -sess_in $SESSION; \ |
| rm -f $SESSION )" \ |
| 0 \ |
| -s "found session ticket extension" \ |
| -S "server hello, adding session ticket extension" \ |
| -s "session successfully restored from cache" \ |
| -S "session successfully restored from ticket" \ |
| -s "a session has been resumed" |
| |
| run_test "Session resume using cache: openssl server" \ |
| "$O_SRV" \ |
| "$P_CLI debug_level=3 tickets=0 reconnect=1" \ |
| 0 \ |
| -C "found session_ticket extension" \ |
| -C "parse new session ticket" \ |
| -c "a session has been resumed" |
| |
| # Tests for Max Fragment Length extension |
| |
| run_test "Max fragment length: not used, reference" \ |
| "$P_SRV debug_level=3" \ |
| "$P_CLI debug_level=3" \ |
| 0 \ |
| -C "client hello, adding max_fragment_length extension" \ |
| -S "found max fragment length extension" \ |
| -S "server hello, max_fragment_length extension" \ |
| -C "found max_fragment_length extension" |
| |
| run_test "Max fragment length: used by client" \ |
| "$P_SRV debug_level=3" \ |
| "$P_CLI debug_level=3 max_frag_len=4096" \ |
| 0 \ |
| -c "client hello, adding max_fragment_length extension" \ |
| -s "found max fragment length extension" \ |
| -s "server hello, max_fragment_length extension" \ |
| -c "found max_fragment_length extension" |
| |
| run_test "Max fragment length: used by server" \ |
| "$P_SRV debug_level=3 max_frag_len=4096" \ |
| "$P_CLI debug_level=3" \ |
| 0 \ |
| -C "client hello, adding max_fragment_length extension" \ |
| -S "found max fragment length extension" \ |
| -S "server hello, max_fragment_length extension" \ |
| -C "found max_fragment_length extension" |
| |
| requires_gnutls |
| run_test "Max fragment length: gnutls server" \ |
| "$G_SRV" \ |
| "$P_CLI debug_level=3 max_frag_len=4096" \ |
| 0 \ |
| -c "client hello, adding max_fragment_length extension" \ |
| -c "found max_fragment_length extension" |
| |
| # Tests for renegotiation |
| |
| run_test "Renegotiation: none, for reference" \ |
| "$P_SRV debug_level=3 exchanges=2" \ |
| "$P_CLI debug_level=3 exchanges=2" \ |
| 0 \ |
| -C "client hello, adding renegotiation extension" \ |
| -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ |
| -S "found renegotiation extension" \ |
| -s "server hello, secure renegotiation extension" \ |
| -c "found renegotiation extension" \ |
| -C "=> renegotiate" \ |
| -S "=> renegotiate" \ |
| -S "write hello request" |
| |
| run_test "Renegotiation: client-initiated" \ |
| "$P_SRV debug_level=3 exchanges=2 renegotiation=1" \ |
| "$P_CLI debug_level=3 exchanges=2 renegotiation=1 renegotiate=1" \ |
| 0 \ |
| -c "client hello, adding renegotiation extension" \ |
| -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ |
| -s "found renegotiation extension" \ |
| -s "server hello, secure renegotiation extension" \ |
| -c "found renegotiation extension" \ |
| -c "=> renegotiate" \ |
| -s "=> renegotiate" \ |
| -S "write hello request" |
| |
| run_test "Renegotiation: server-initiated" \ |
| "$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1" \ |
| "$P_CLI debug_level=3 exchanges=2 renegotiation=1" \ |
| 0 \ |
| -c "client hello, adding renegotiation extension" \ |
| -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ |
| -s "found renegotiation extension" \ |
| -s "server hello, secure renegotiation extension" \ |
| -c "found renegotiation extension" \ |
| -c "=> renegotiate" \ |
| -s "=> renegotiate" \ |
| -s "write hello request" |
| |
| run_test "Renegotiation: double" \ |
| "$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1" \ |
| "$P_CLI debug_level=3 exchanges=2 renegotiation=1 renegotiate=1" \ |
| 0 \ |
| -c "client hello, adding renegotiation extension" \ |
| -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ |
| -s "found renegotiation extension" \ |
| -s "server hello, secure renegotiation extension" \ |
| -c "found renegotiation extension" \ |
| -c "=> renegotiate" \ |
| -s "=> renegotiate" \ |
| -s "write hello request" |
| |
| run_test "Renegotiation: client-initiated, server-rejected" \ |
| "$P_SRV debug_level=3 exchanges=2 renegotiation=0" \ |
| "$P_CLI debug_level=3 exchanges=2 renegotiation=1 renegotiate=1" \ |
| 1 \ |
| -c "client hello, adding renegotiation extension" \ |
| -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ |
| -S "found renegotiation extension" \ |
| -s "server hello, secure renegotiation extension" \ |
| -c "found renegotiation extension" \ |
| -c "=> renegotiate" \ |
| -S "=> renegotiate" \ |
| -S "write hello request" \ |
| -c "SSL - Unexpected message at ServerHello in renegotiation" \ |
| -c "failed" |
| |
| run_test "Renegotiation: server-initiated, client-rejected, default" \ |
| "$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1" \ |
| "$P_CLI debug_level=3 exchanges=2 renegotiation=0" \ |
| 0 \ |
| -C "client hello, adding renegotiation extension" \ |
| -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ |
| -S "found renegotiation extension" \ |
| -s "server hello, secure renegotiation extension" \ |
| -c "found renegotiation extension" \ |
| -C "=> renegotiate" \ |
| -S "=> renegotiate" \ |
| -s "write hello request" \ |
| -S "SSL - An unexpected message was received from our peer" \ |
| -S "failed" |
| |
| run_test "Renegotiation: server-initiated, client-rejected, not enforced" \ |
| "$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1 \ |
| renego_delay=-1" \ |
| "$P_CLI debug_level=3 exchanges=2 renegotiation=0" \ |
| 0 \ |
| -C "client hello, adding renegotiation extension" \ |
| -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ |
| -S "found renegotiation extension" \ |
| -s "server hello, secure renegotiation extension" \ |
| -c "found renegotiation extension" \ |
| -C "=> renegotiate" \ |
| -S "=> renegotiate" \ |
| -s "write hello request" \ |
| -S "SSL - An unexpected message was received from our peer" \ |
| -S "failed" |
| |
| # delay 2 for 1 alert record + 1 application data record |
| run_test "Renegotiation: server-initiated, client-rejected, delay 2" \ |
| "$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1 \ |
| renego_delay=2" \ |
| "$P_CLI debug_level=3 exchanges=2 renegotiation=0" \ |
| 0 \ |
| -C "client hello, adding renegotiation extension" \ |
| -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ |
| -S "found renegotiation extension" \ |
| -s "server hello, secure renegotiation extension" \ |
| -c "found renegotiation extension" \ |
| -C "=> renegotiate" \ |
| -S "=> renegotiate" \ |
| -s "write hello request" \ |
| -S "SSL - An unexpected message was received from our peer" \ |
| -S "failed" |
| |
| run_test "Renegotiation: server-initiated, client-rejected, delay 0" \ |
| "$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1 \ |
| renego_delay=0" \ |
| "$P_CLI debug_level=3 exchanges=2 renegotiation=0" \ |
| 0 \ |
| -C "client hello, adding renegotiation extension" \ |
| -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ |
| -S "found renegotiation extension" \ |
| -s "server hello, secure renegotiation extension" \ |
| -c "found renegotiation extension" \ |
| -C "=> renegotiate" \ |
| -S "=> renegotiate" \ |
| -s "write hello request" \ |
| -s "SSL - An unexpected message was received from our peer" |
| |
| run_test "Renegotiation: server-initiated, client-accepted, delay 0" \ |
| "$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1 \ |
| renego_delay=0" \ |
| "$P_CLI debug_level=3 exchanges=2 renegotiation=1" \ |
| 0 \ |
| -c "client hello, adding renegotiation extension" \ |
| -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ |
| -s "found renegotiation extension" \ |
| -s "server hello, secure renegotiation extension" \ |
| -c "found renegotiation extension" \ |
| -c "=> renegotiate" \ |
| -s "=> renegotiate" \ |
| -s "write hello request" \ |
| -S "SSL - An unexpected message was received from our peer" \ |
| -S "failed" |
| |
| run_test "Renegotiation: periodic, just below period" \ |
| "$P_SRV debug_level=3 exchanges=9 renegotiation=1 renego_period=3" \ |
| "$P_CLI debug_level=3 exchanges=2 renegotiation=1" \ |
| 0 \ |
| -C "client hello, adding renegotiation extension" \ |
| -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ |
| -S "found renegotiation extension" \ |
| -s "server hello, secure renegotiation extension" \ |
| -c "found renegotiation extension" \ |
| -S "record counter limit reached: renegotiate" \ |
| -C "=> renegotiate" \ |
| -S "=> renegotiate" \ |
| -S "write hello request" \ |
| -S "SSL - An unexpected message was received from our peer" \ |
| -S "failed" |
| |
| # one extra exchange to be able to complete renego |
| run_test "Renegotiation: periodic, just above period" \ |
| "$P_SRV debug_level=3 exchanges=9 renegotiation=1 renego_period=3" \ |
| "$P_CLI debug_level=3 exchanges=4 renegotiation=1" \ |
| 0 \ |
| -c "client hello, adding renegotiation extension" \ |
| -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ |
| -s "found renegotiation extension" \ |
| -s "server hello, secure renegotiation extension" \ |
| -c "found renegotiation extension" \ |
| -s "record counter limit reached: renegotiate" \ |
| -c "=> renegotiate" \ |
| -s "=> renegotiate" \ |
| -s "write hello request" \ |
| -S "SSL - An unexpected message was received from our peer" \ |
| -S "failed" |
| |
| run_test "Renegotiation: periodic, two times period" \ |
| "$P_SRV debug_level=3 exchanges=9 renegotiation=1 renego_period=3" \ |
| "$P_CLI debug_level=3 exchanges=7 renegotiation=1" \ |
| 0 \ |
| -c "client hello, adding renegotiation extension" \ |
| -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ |
| -s "found renegotiation extension" \ |
| -s "server hello, secure renegotiation extension" \ |
| -c "found renegotiation extension" \ |
| -s "record counter limit reached: renegotiate" \ |
| -c "=> renegotiate" \ |
| -s "=> renegotiate" \ |
| -s "write hello request" \ |
| -S "SSL - An unexpected message was received from our peer" \ |
| -S "failed" |
| |
| run_test "Renegotiation: periodic, above period, disabled" \ |
| "$P_SRV debug_level=3 exchanges=9 renegotiation=0 renego_period=3" \ |
| "$P_CLI debug_level=3 exchanges=4 renegotiation=1" \ |
| 0 \ |
| -C "client hello, adding renegotiation extension" \ |
| -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ |
| -S "found renegotiation extension" \ |
| -s "server hello, secure renegotiation extension" \ |
| -c "found renegotiation extension" \ |
| -S "record counter limit reached: renegotiate" \ |
| -C "=> renegotiate" \ |
| -S "=> renegotiate" \ |
| -S "write hello request" \ |
| -S "SSL - An unexpected message was received from our peer" \ |
| -S "failed" |
| |
| run_test "Renegotiation: nbio, client-initiated" \ |
| "$P_SRV debug_level=3 nbio=2 exchanges=2 renegotiation=1" \ |
| "$P_CLI debug_level=3 nbio=2 exchanges=2 renegotiation=1 renegotiate=1" \ |
| 0 \ |
| -c "client hello, adding renegotiation extension" \ |
| -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ |
| -s "found renegotiation extension" \ |
| -s "server hello, secure renegotiation extension" \ |
| -c "found renegotiation extension" \ |
| -c "=> renegotiate" \ |
| -s "=> renegotiate" \ |
| -S "write hello request" |
| |
| run_test "Renegotiation: nbio, server-initiated" \ |
| "$P_SRV debug_level=3 nbio=2 exchanges=2 renegotiation=1 renegotiate=1" \ |
| "$P_CLI debug_level=3 nbio=2 exchanges=2 renegotiation=1" \ |
| 0 \ |
| -c "client hello, adding renegotiation extension" \ |
| -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ |
| -s "found renegotiation extension" \ |
| -s "server hello, secure renegotiation extension" \ |
| -c "found renegotiation extension" \ |
| -c "=> renegotiate" \ |
| -s "=> renegotiate" \ |
| -s "write hello request" |
| |
| run_test "Renegotiation: openssl server, client-initiated" \ |
| "$O_SRV" \ |
| "$P_CLI debug_level=3 exchanges=1 renegotiation=1 renegotiate=1" \ |
| 0 \ |
| -c "client hello, adding renegotiation extension" \ |
| -c "found renegotiation extension" \ |
| -c "=> renegotiate" \ |
| -C "ssl_hanshake() returned" \ |
| -C "error" \ |
| -c "HTTP/1.0 200 [Oo][Kk]" |
| |
| requires_gnutls |
| run_test "Renegotiation: gnutls server strict, client-initiated" \ |
| "$G_SRV --priority=NORMAL:%SAFE_RENEGOTIATION" \ |
| "$P_CLI debug_level=3 exchanges=1 renegotiation=1 renegotiate=1" \ |
| 0 \ |
| -c "client hello, adding renegotiation extension" \ |
| -c "found renegotiation extension" \ |
| -c "=> renegotiate" \ |
| -C "ssl_hanshake() returned" \ |
| -C "error" \ |
| -c "HTTP/1.0 200 [Oo][Kk]" |
| |
| requires_gnutls |
| run_test "Renegotiation: gnutls server unsafe, client-initiated default" \ |
| "$G_SRV --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \ |
| "$P_CLI debug_level=3 exchanges=1 renegotiation=1 renegotiate=1" \ |
| 1 \ |
| -c "client hello, adding renegotiation extension" \ |
| -C "found renegotiation extension" \ |
| -c "=> renegotiate" \ |
| -c "ssl_handshake() returned" \ |
| -c "error" \ |
| -C "HTTP/1.0 200 [Oo][Kk]" |
| |
| requires_gnutls |
| run_test "Renegotiation: gnutls server unsafe, client-inititated no legacy" \ |
| "$G_SRV --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \ |
| "$P_CLI debug_level=3 exchanges=1 renegotiation=1 renegotiate=1 \ |
| allow_legacy=0" \ |
| 1 \ |
| -c "client hello, adding renegotiation extension" \ |
| -C "found renegotiation extension" \ |
| -c "=> renegotiate" \ |
| -c "ssl_handshake() returned" \ |
| -c "error" \ |
| -C "HTTP/1.0 200 [Oo][Kk]" |
| |
| requires_gnutls |
| run_test "Renegotiation: gnutls server unsafe, client-inititated legacy" \ |
| "$G_SRV --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \ |
| "$P_CLI debug_level=3 exchanges=1 renegotiation=1 renegotiate=1 \ |
| allow_legacy=1" \ |
| 0 \ |
| -c "client hello, adding renegotiation extension" \ |
| -C "found renegotiation extension" \ |
| -c "=> renegotiate" \ |
| -C "ssl_hanshake() returned" \ |
| -C "error" \ |
| -c "HTTP/1.0 200 [Oo][Kk]" |
| |
| # Test for the "secure renegotation" extension only (no actual renegotiation) |
| |
| requires_gnutls |
| run_test "Renego ext: gnutls server strict, client default" \ |
| "$G_SRV --priority=NORMAL:%SAFE_RENEGOTIATION" \ |
| "$P_CLI debug_level=3" \ |
| 0 \ |
| -c "found renegotiation extension" \ |
| -C "error" \ |
| -c "HTTP/1.0 200 [Oo][Kk]" |
| |
| requires_gnutls |
| run_test "Renego ext: gnutls server unsafe, client default" \ |
| "$G_SRV --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \ |
| "$P_CLI debug_level=3" \ |
| 0 \ |
| -C "found renegotiation extension" \ |
| -C "error" \ |
| -c "HTTP/1.0 200 [Oo][Kk]" |
| |
| requires_gnutls |
| run_test "Renego ext: gnutls server unsafe, client break legacy" \ |
| "$G_SRV --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \ |
| "$P_CLI debug_level=3 allow_legacy=-1" \ |
| 1 \ |
| -C "found renegotiation extension" \ |
| -c "error" \ |
| -C "HTTP/1.0 200 [Oo][Kk]" |
| |
| requires_gnutls |
| run_test "Renego ext: gnutls client strict, server default" \ |
| "$P_SRV debug_level=3" \ |
| "$G_CLI --priority=NORMAL:%SAFE_RENEGOTIATION" \ |
| 0 \ |
| -s "received TLS_EMPTY_RENEGOTIATION_INFO\|found renegotiation extension" \ |
| -s "server hello, secure renegotiation extension" |
| |
| requires_gnutls |
| run_test "Renego ext: gnutls client unsafe, server default" \ |
| "$P_SRV debug_level=3" \ |
| "$G_CLI --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \ |
| 0 \ |
| -S "received TLS_EMPTY_RENEGOTIATION_INFO\|found renegotiation extension" \ |
| -S "server hello, secure renegotiation extension" |
| |
| requires_gnutls |
| run_test "Renego ext: gnutls client unsafe, server break legacy" \ |
| "$P_SRV debug_level=3 allow_legacy=-1" \ |
| "$G_CLI --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \ |
| 1 \ |
| -S "received TLS_EMPTY_RENEGOTIATION_INFO\|found renegotiation extension" \ |
| -S "server hello, secure renegotiation extension" |
| |
| # Tests for auth_mode |
| |
| run_test "Authentication: server badcert, client required" \ |
| "$P_SRV crt_file=data_files/server5-badsign.crt \ |
| key_file=data_files/server5.key" \ |
| "$P_CLI debug_level=1 auth_mode=required" \ |
| 1 \ |
| -c "x509_verify_cert() returned" \ |
| -c "! self-signed or not signed by a trusted CA" \ |
| -c "! ssl_handshake returned" \ |
| -c "X509 - Certificate verification failed" |
| |
| run_test "Authentication: server badcert, client optional" \ |
| "$P_SRV crt_file=data_files/server5-badsign.crt \ |
| key_file=data_files/server5.key" \ |
| "$P_CLI debug_level=1 auth_mode=optional" \ |
| 0 \ |
| -c "x509_verify_cert() returned" \ |
| -c "! self-signed or not signed by a trusted CA" \ |
| -C "! ssl_handshake returned" \ |
| -C "X509 - Certificate verification failed" |
| |
| run_test "Authentication: server badcert, client none" \ |
| "$P_SRV crt_file=data_files/server5-badsign.crt \ |
| key_file=data_files/server5.key" \ |
| "$P_CLI debug_level=1 auth_mode=none" \ |
| 0 \ |
| -C "x509_verify_cert() returned" \ |
| -C "! self-signed or not signed by a trusted CA" \ |
| -C "! ssl_handshake returned" \ |
| -C "X509 - Certificate verification failed" |
| |
| run_test "Authentication: client badcert, server required" \ |
| "$P_SRV debug_level=3 auth_mode=required" \ |
| "$P_CLI debug_level=3 crt_file=data_files/server5-badsign.crt \ |
| key_file=data_files/server5.key" \ |
| 1 \ |
| -S "skip write certificate request" \ |
| -C "skip parse certificate request" \ |
| -c "got a certificate request" \ |
| -C "skip write certificate" \ |
| -C "skip write certificate verify" \ |
| -S "skip parse certificate verify" \ |
| -s "x509_verify_cert() returned" \ |
| -S "! self-signed or not signed by a trusted CA" \ |
| -s "! ssl_handshake returned" \ |
| -c "! ssl_handshake returned" \ |
| -s "X509 - Certificate verification failed" |
| |
| run_test "Authentication: client badcert, server optional" \ |
| "$P_SRV debug_level=3 auth_mode=optional" \ |
| "$P_CLI debug_level=3 crt_file=data_files/server5-badsign.crt \ |
| key_file=data_files/server5.key" \ |
| 0 \ |
| -S "skip write certificate request" \ |
| -C "skip parse certificate request" \ |
| -c "got a certificate request" \ |
| -C "skip write certificate" \ |
| -C "skip write certificate verify" \ |
| -S "skip parse certificate verify" \ |
| -s "x509_verify_cert() returned" \ |
| -s "! self-signed or not signed by a trusted CA" \ |
| -S "! ssl_handshake returned" \ |
| -C "! ssl_handshake returned" \ |
| -S "X509 - Certificate verification failed" |
| |
| run_test "Authentication: client badcert, server none" \ |
| "$P_SRV debug_level=3 auth_mode=none" \ |
| "$P_CLI debug_level=3 crt_file=data_files/server5-badsign.crt \ |
| key_file=data_files/server5.key" \ |
| 0 \ |
| -s "skip write certificate request" \ |
| -C "skip parse certificate request" \ |
| -c "got no certificate request" \ |
| -c "skip write certificate" \ |
| -c "skip write certificate verify" \ |
| -s "skip parse certificate verify" \ |
| -S "x509_verify_cert() returned" \ |
| -S "! self-signed or not signed by a trusted CA" \ |
| -S "! ssl_handshake returned" \ |
| -C "! ssl_handshake returned" \ |
| -S "X509 - Certificate verification failed" |
| |
| run_test "Authentication: client no cert, server optional" \ |
| "$P_SRV debug_level=3 auth_mode=optional" \ |
| "$P_CLI debug_level=3 crt_file=none key_file=none" \ |
| 0 \ |
| -S "skip write certificate request" \ |
| -C "skip parse certificate request" \ |
| -c "got a certificate request" \ |
| -C "skip write certificate$" \ |
| -C "got no certificate to send" \ |
| -S "SSLv3 client has no certificate" \ |
| -c "skip write certificate verify" \ |
| -s "skip parse certificate verify" \ |
| -s "! no client certificate sent" \ |
| -S "! ssl_handshake returned" \ |
| -C "! ssl_handshake returned" \ |
| -S "X509 - Certificate verification failed" |
| |
| run_test "Authentication: openssl client no cert, server optional" \ |
| "$P_SRV debug_level=3 auth_mode=optional" \ |
| "$O_CLI" \ |
| 0 \ |
| -S "skip write certificate request" \ |
| -s "skip parse certificate verify" \ |
| -s "! no client certificate sent" \ |
| -S "! ssl_handshake returned" \ |
| -S "X509 - Certificate verification failed" |
| |
| run_test "Authentication: client no cert, openssl server optional" \ |
| "$O_SRV -verify 10" \ |
| "$P_CLI debug_level=3 crt_file=none key_file=none" \ |
| 0 \ |
| -C "skip parse certificate request" \ |
| -c "got a certificate request" \ |
| -C "skip write certificate$" \ |
| -c "skip write certificate verify" \ |
| -C "! ssl_handshake returned" |
| |
| run_test "Authentication: client no cert, ssl3" \ |
| "$P_SRV debug_level=3 auth_mode=optional force_version=ssl3" \ |
| "$P_CLI debug_level=3 crt_file=none key_file=none min_version=ssl3" \ |
| 0 \ |
| -S "skip write certificate request" \ |
| -C "skip parse certificate request" \ |
| -c "got a certificate request" \ |
| -C "skip write certificate$" \ |
| -c "skip write certificate verify" \ |
| -c "got no certificate to send" \ |
| -s "SSLv3 client has no certificate" \ |
| -s "skip parse certificate verify" \ |
| -s "! no client certificate sent" \ |
| -S "! ssl_handshake returned" \ |
| -C "! ssl_handshake returned" \ |
| -S "X509 - Certificate verification failed" |
| |
| # Tests for certificate selection based on SHA verson |
| |
| run_test "Certificate hash: client TLS 1.2 -> SHA-2" \ |
| "$P_SRV crt_file=data_files/server5.crt \ |
| key_file=data_files/server5.key \ |
| crt_file2=data_files/server5-sha1.crt \ |
| key_file2=data_files/server5.key" \ |
| "$P_CLI force_version=tls1_2" \ |
| 0 \ |
| -c "signed using.*ECDSA with SHA256" \ |
| -C "signed using.*ECDSA with SHA1" |
| |
| run_test "Certificate hash: client TLS 1.1 -> SHA-1" \ |
| "$P_SRV crt_file=data_files/server5.crt \ |
| key_file=data_files/server5.key \ |
| crt_file2=data_files/server5-sha1.crt \ |
| key_file2=data_files/server5.key" \ |
| "$P_CLI force_version=tls1_1" \ |
| 0 \ |
| -C "signed using.*ECDSA with SHA256" \ |
| -c "signed using.*ECDSA with SHA1" |
| |
| run_test "Certificate hash: client TLS 1.0 -> SHA-1" \ |
| "$P_SRV crt_file=data_files/server5.crt \ |
| key_file=data_files/server5.key \ |
| crt_file2=data_files/server5-sha1.crt \ |
| key_file2=data_files/server5.key" \ |
| "$P_CLI force_version=tls1" \ |
| 0 \ |
| -C "signed using.*ECDSA with SHA256" \ |
| -c "signed using.*ECDSA with SHA1" |
| |
| run_test "Certificate hash: client TLS 1.1, no SHA-1 -> SHA-2 (order 1)" \ |
| "$P_SRV crt_file=data_files/server5.crt \ |
| key_file=data_files/server5.key \ |
| crt_file2=data_files/server6.crt \ |
| key_file2=data_files/server6.key" \ |
| "$P_CLI force_version=tls1_1" \ |
| 0 \ |
| -c "serial number.*09" \ |
| -c "signed using.*ECDSA with SHA256" \ |
| -C "signed using.*ECDSA with SHA1" |
| |
| run_test "Certificate hash: client TLS 1.1, no SHA-1 -> SHA-2 (order 2)" \ |
| "$P_SRV crt_file=data_files/server6.crt \ |
| key_file=data_files/server6.key \ |
| crt_file2=data_files/server5.crt \ |
| key_file2=data_files/server5.key" \ |
| "$P_CLI force_version=tls1_1" \ |
| 0 \ |
| -c "serial number.*0A" \ |
| -c "signed using.*ECDSA with SHA256" \ |
| -C "signed using.*ECDSA with SHA1" |
| |
| # tests for SNI |
| |
| run_test "SNI: no SNI callback" \ |
| "$P_SRV debug_level=3 server_addr=127.0.0.1 \ |
| crt_file=data_files/server5.crt key_file=data_files/server5.key" \ |
| "$P_CLI debug_level=0 server_addr=127.0.0.1 \ |
| server_name=localhost" \ |
| 0 \ |
| -S "parse ServerName extension" \ |
| -c "issuer name *: C=NL, O=PolarSSL, CN=Polarssl Test EC CA" \ |
| -c "subject name *: C=NL, O=PolarSSL, CN=localhost" |
| |
| run_test "SNI: matching cert 1" \ |
| "$P_SRV debug_level=3 server_addr=127.0.0.1 \ |
| crt_file=data_files/server5.crt key_file=data_files/server5.key \ |
| sni=localhost,data_files/server2.crt,data_files/server2.key,polarssl.example,data_files/server1-nospace.crt,data_files/server1.key" \ |
| "$P_CLI debug_level=0 server_addr=127.0.0.1 \ |
| server_name=localhost" \ |
| 0 \ |
| -s "parse ServerName extension" \ |
| -c "issuer name *: C=NL, O=PolarSSL, CN=PolarSSL Test CA" \ |
| -c "subject name *: C=NL, O=PolarSSL, CN=localhost" |
| |
| run_test "SNI: matching cert 2" \ |
| "$P_SRV debug_level=3 server_addr=127.0.0.1 \ |
| crt_file=data_files/server5.crt key_file=data_files/server5.key \ |
| sni=localhost,data_files/server2.crt,data_files/server2.key,polarssl.example,data_files/server1-nospace.crt,data_files/server1.key" \ |
| "$P_CLI debug_level=0 server_addr=127.0.0.1 \ |
| server_name=polarssl.example" \ |
| 0 \ |
| -s "parse ServerName extension" \ |
| -c "issuer name *: C=NL, O=PolarSSL, CN=PolarSSL Test CA" \ |
| -c "subject name *: C=NL, O=PolarSSL, CN=polarssl.example" |
| |
| run_test "SNI: no matching cert" \ |
| "$P_SRV debug_level=3 server_addr=127.0.0.1 \ |
| crt_file=data_files/server5.crt key_file=data_files/server5.key \ |
| sni=localhost,data_files/server2.crt,data_files/server2.key,polarssl.example,data_files/server1-nospace.crt,data_files/server1.key" \ |
| "$P_CLI debug_level=0 server_addr=127.0.0.1 \ |
| server_name=nonesuch.example" \ |
| 1 \ |
| -s "parse ServerName extension" \ |
| -s "ssl_sni_wrapper() returned" \ |
| -s "ssl_handshake returned" \ |
| -c "ssl_handshake returned" \ |
| -c "SSL - A fatal alert message was received from our peer" |
| |
| # Tests for non-blocking I/O: exercise a variety of handshake flows |
| |
| run_test "Non-blocking I/O: basic handshake" \ |
| "$P_SRV nbio=2 tickets=0 auth_mode=none" \ |
| "$P_CLI nbio=2 tickets=0" \ |
| 0 \ |
| -S "ssl_handshake returned" \ |
| -C "ssl_handshake returned" \ |
| -c "Read from server: .* bytes read" |
| |
| run_test "Non-blocking I/O: client auth" \ |
| "$P_SRV nbio=2 tickets=0 auth_mode=required" \ |
| "$P_CLI nbio=2 tickets=0" \ |
| 0 \ |
| -S "ssl_handshake returned" \ |
| -C "ssl_handshake returned" \ |
| -c "Read from server: .* bytes read" |
| |
| run_test "Non-blocking I/O: ticket" \ |
| "$P_SRV nbio=2 tickets=1 auth_mode=none" \ |
| "$P_CLI nbio=2 tickets=1" \ |
| 0 \ |
| -S "ssl_handshake returned" \ |
| -C "ssl_handshake returned" \ |
| -c "Read from server: .* bytes read" |
| |
| run_test "Non-blocking I/O: ticket + client auth" \ |
| "$P_SRV nbio=2 tickets=1 auth_mode=required" \ |
| "$P_CLI nbio=2 tickets=1" \ |
| 0 \ |
| -S "ssl_handshake returned" \ |
| -C "ssl_handshake returned" \ |
| -c "Read from server: .* bytes read" |
| |
| run_test "Non-blocking I/O: ticket + client auth + resume" \ |
| "$P_SRV nbio=2 tickets=1 auth_mode=required" \ |
| "$P_CLI nbio=2 tickets=1 reconnect=1" \ |
| 0 \ |
| -S "ssl_handshake returned" \ |
| -C "ssl_handshake returned" \ |
| -c "Read from server: .* bytes read" |
| |
| run_test "Non-blocking I/O: ticket + resume" \ |
| "$P_SRV nbio=2 tickets=1 auth_mode=none" \ |
| "$P_CLI nbio=2 tickets=1 reconnect=1" \ |
| 0 \ |
| -S "ssl_handshake returned" \ |
| -C "ssl_handshake returned" \ |
| -c "Read from server: .* bytes read" |
| |
| run_test "Non-blocking I/O: session-id resume" \ |
| "$P_SRV nbio=2 tickets=0 auth_mode=none" \ |
| "$P_CLI nbio=2 tickets=0 reconnect=1" \ |
| 0 \ |
| -S "ssl_handshake returned" \ |
| -C "ssl_handshake returned" \ |
| -c "Read from server: .* bytes read" |
| |
| # Tests for version negotiation |
| |
| run_test "Version check: all -> 1.2" \ |
| "$P_SRV" \ |
| "$P_CLI" \ |
| 0 \ |
| -S "ssl_handshake returned" \ |
| -C "ssl_handshake returned" \ |
| -s "Protocol is TLSv1.2" \ |
| -c "Protocol is TLSv1.2" |
| |
| run_test "Version check: cli max 1.1 -> 1.1" \ |
| "$P_SRV" \ |
| "$P_CLI max_version=tls1_1" \ |
| 0 \ |
| -S "ssl_handshake returned" \ |
| -C "ssl_handshake returned" \ |
| -s "Protocol is TLSv1.1" \ |
| -c "Protocol is TLSv1.1" |
| |
| run_test "Version check: srv max 1.1 -> 1.1" \ |
| "$P_SRV max_version=tls1_1" \ |
| "$P_CLI" \ |
| 0 \ |
| -S "ssl_handshake returned" \ |
| -C "ssl_handshake returned" \ |
| -s "Protocol is TLSv1.1" \ |
| -c "Protocol is TLSv1.1" |
| |
| run_test "Version check: cli+srv max 1.1 -> 1.1" \ |
| "$P_SRV max_version=tls1_1" \ |
| "$P_CLI max_version=tls1_1" \ |
| 0 \ |
| -S "ssl_handshake returned" \ |
| -C "ssl_handshake returned" \ |
| -s "Protocol is TLSv1.1" \ |
| -c "Protocol is TLSv1.1" |
| |
| run_test "Version check: cli max 1.1, srv min 1.1 -> 1.1" \ |
| "$P_SRV min_version=tls1_1" \ |
| "$P_CLI max_version=tls1_1" \ |
| 0 \ |
| -S "ssl_handshake returned" \ |
| -C "ssl_handshake returned" \ |
| -s "Protocol is TLSv1.1" \ |
| -c "Protocol is TLSv1.1" |
| |
| run_test "Version check: cli min 1.1, srv max 1.1 -> 1.1" \ |
| "$P_SRV max_version=tls1_1" \ |
| "$P_CLI min_version=tls1_1" \ |
| 0 \ |
| -S "ssl_handshake returned" \ |
| -C "ssl_handshake returned" \ |
| -s "Protocol is TLSv1.1" \ |
| -c "Protocol is TLSv1.1" |
| |
| run_test "Version check: cli min 1.2, srv max 1.1 -> fail" \ |
| "$P_SRV max_version=tls1_1" \ |
| "$P_CLI min_version=tls1_2" \ |
| 1 \ |
| -s "ssl_handshake returned" \ |
| -c "ssl_handshake returned" \ |
| -c "SSL - Handshake protocol not within min/max boundaries" |
| |
| run_test "Version check: srv min 1.2, cli max 1.1 -> fail" \ |
| "$P_SRV min_version=tls1_2" \ |
| "$P_CLI max_version=tls1_1" \ |
| 1 \ |
| -s "ssl_handshake returned" \ |
| -c "ssl_handshake returned" \ |
| -s "SSL - Handshake protocol not within min/max boundaries" |
| |
| # Tests for ALPN extension |
| |
| if grep '^#define POLARSSL_SSL_ALPN' $CONFIG_H >/dev/null; then |
| |
| run_test "ALPN: none" \ |
| "$P_SRV debug_level=3" \ |
| "$P_CLI debug_level=3" \ |
| 0 \ |
| -C "client hello, adding alpn extension" \ |
| -S "found alpn extension" \ |
| -C "got an alert message, type: \\[2:120]" \ |
| -S "server hello, adding alpn extension" \ |
| -C "found alpn extension " \ |
| -C "Application Layer Protocol is" \ |
| -S "Application Layer Protocol is" |
| |
| run_test "ALPN: client only" \ |
| "$P_SRV debug_level=3" \ |
| "$P_CLI debug_level=3 alpn=abc,1234" \ |
| 0 \ |
| -c "client hello, adding alpn extension" \ |
| -s "found alpn extension" \ |
| -C "got an alert message, type: \\[2:120]" \ |
| -S "server hello, adding alpn extension" \ |
| -C "found alpn extension " \ |
| -c "Application Layer Protocol is (none)" \ |
| -S "Application Layer Protocol is" |
| |
| run_test "ALPN: server only" \ |
| "$P_SRV debug_level=3 alpn=abc,1234" \ |
| "$P_CLI debug_level=3" \ |
| 0 \ |
| -C "client hello, adding alpn extension" \ |
| -S "found alpn extension" \ |
| -C "got an alert message, type: \\[2:120]" \ |
| -S "server hello, adding alpn extension" \ |
| -C "found alpn extension " \ |
| -C "Application Layer Protocol is" \ |
| -s "Application Layer Protocol is (none)" |
| |
| run_test "ALPN: both, common cli1-srv1" \ |
| "$P_SRV debug_level=3 alpn=abc,1234" \ |
| "$P_CLI debug_level=3 alpn=abc,1234" \ |
| 0 \ |
| -c "client hello, adding alpn extension" \ |
| -s "found alpn extension" \ |
| -C "got an alert message, type: \\[2:120]" \ |
| -s "server hello, adding alpn extension" \ |
| -c "found alpn extension" \ |
| -c "Application Layer Protocol is abc" \ |
| -s "Application Layer Protocol is abc" |
| |
| run_test "ALPN: both, common cli2-srv1" \ |
| "$P_SRV debug_level=3 alpn=abc,1234" \ |
| "$P_CLI debug_level=3 alpn=1234,abc" \ |
| 0 \ |
| -c "client hello, adding alpn extension" \ |
| -s "found alpn extension" \ |
| -C "got an alert message, type: \\[2:120]" \ |
| -s "server hello, adding alpn extension" \ |
| -c "found alpn extension" \ |
| -c "Application Layer Protocol is abc" \ |
| -s "Application Layer Protocol is abc" |
| |
| run_test "ALPN: both, common cli1-srv2" \ |
| "$P_SRV debug_level=3 alpn=abc,1234" \ |
| "$P_CLI debug_level=3 alpn=1234,abcde" \ |
| 0 \ |
| -c "client hello, adding alpn extension" \ |
| -s "found alpn extension" \ |
| -C "got an alert message, type: \\[2:120]" \ |
| -s "server hello, adding alpn extension" \ |
| -c "found alpn extension" \ |
| -c "Application Layer Protocol is 1234" \ |
| -s "Application Layer Protocol is 1234" |
| |
| run_test "ALPN: both, no common" \ |
| "$P_SRV debug_level=3 alpn=abc,123" \ |
| "$P_CLI debug_level=3 alpn=1234,abcde" \ |
| 1 \ |
| -c "client hello, adding alpn extension" \ |
| -s "found alpn extension" \ |
| -c "got an alert message, type: \\[2:120]" \ |
| -S "server hello, adding alpn extension" \ |
| -C "found alpn extension" \ |
| -C "Application Layer Protocol is 1234" \ |
| -S "Application Layer Protocol is 1234" |
| |
| fi |
| |
| # Tests for keyUsage in leaf certificates, part 1: |
| # server-side certificate/suite selection |
| |
| run_test "keyUsage srv: RSA, digitalSignature -> (EC)DHE-RSA" \ |
| "$P_SRV key_file=data_files/server2.key \ |
| crt_file=data_files/server2.ku-ds.crt" \ |
| "$P_CLI" \ |
| 0 \ |
| -c "Ciphersuite is TLS-[EC]*DHE-RSA-WITH-" |
| |
| |
| run_test "keyUsage srv: RSA, keyEncipherment -> RSA" \ |
| "$P_SRV key_file=data_files/server2.key \ |
| crt_file=data_files/server2.ku-ke.crt" \ |
| "$P_CLI" \ |
| 0 \ |
| -c "Ciphersuite is TLS-RSA-WITH-" |
| |
| run_test "keyUsage srv: RSA, keyAgreement -> fail" \ |
| "$P_SRV key_file=data_files/server2.key \ |
| crt_file=data_files/server2.ku-ka.crt" \ |
| "$P_CLI" \ |
| 1 \ |
| -C "Ciphersuite is " |
| |
| run_test "keyUsage srv: ECDSA, digitalSignature -> ECDHE-ECDSA" \ |
| "$P_SRV key_file=data_files/server5.key \ |
| crt_file=data_files/server5.ku-ds.crt" \ |
| "$P_CLI" \ |
| 0 \ |
| -c "Ciphersuite is TLS-ECDHE-ECDSA-WITH-" |
| |
| |
| run_test "keyUsage srv: ECDSA, keyAgreement -> ECDH-" \ |
| "$P_SRV key_file=data_files/server5.key \ |
| crt_file=data_files/server5.ku-ka.crt" \ |
| "$P_CLI" \ |
| 0 \ |
| -c "Ciphersuite is TLS-ECDH-" |
| |
| run_test "keyUsage srv: ECDSA, keyEncipherment -> fail" \ |
| "$P_SRV key_file=data_files/server5.key \ |
| crt_file=data_files/server5.ku-ke.crt" \ |
| "$P_CLI" \ |
| 1 \ |
| -C "Ciphersuite is " |
| |
| # Tests for keyUsage in leaf certificates, part 2: |
| # client-side checking of server cert |
| |
| run_test "keyUsage cli: DigitalSignature+KeyEncipherment, RSA: OK" \ |
| "$O_SRV -key data_files/server2.key \ |
| -cert data_files/server2.ku-ds_ke.crt" \ |
| "$P_CLI debug_level=1 \ |
| force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \ |
| 0 \ |
| -C "bad certificate (usage extensions)" \ |
| -C "Processing of the Certificate handshake message failed" \ |
| -c "Ciphersuite is TLS-" |
| |
| run_test "keyUsage cli: DigitalSignature+KeyEncipherment, DHE-RSA: OK" \ |
| "$O_SRV -key data_files/server2.key \ |
| -cert data_files/server2.ku-ds_ke.crt" \ |
| "$P_CLI debug_level=1 \ |
| force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA" \ |
| 0 \ |
| -C "bad certificate (usage extensions)" \ |
| -C "Processing of the Certificate handshake message failed" \ |
| -c "Ciphersuite is TLS-" |
| |
| run_test "keyUsage cli: KeyEncipherment, RSA: OK" \ |
| "$O_SRV -key data_files/server2.key \ |
| -cert data_files/server2.ku-ke.crt" \ |
| "$P_CLI debug_level=1 \ |
| force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \ |
| 0 \ |
| -C "bad certificate (usage extensions)" \ |
| -C "Processing of the Certificate handshake message failed" \ |
| -c "Ciphersuite is TLS-" |
| |
| run_test "keyUsage cli: KeyEncipherment, DHE-RSA: fail" \ |
| "$O_SRV -key data_files/server2.key \ |
| -cert data_files/server2.ku-ke.crt" \ |
| "$P_CLI debug_level=1 \ |
| force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA" \ |
| 1 \ |
| -c "bad certificate (usage extensions)" \ |
| -c "Processing of the Certificate handshake message failed" \ |
| -C "Ciphersuite is TLS-" |
| |
| run_test "keyUsage cli: DigitalSignature, DHE-RSA: OK" \ |
| "$O_SRV -key data_files/server2.key \ |
| -cert data_files/server2.ku-ds.crt" \ |
| "$P_CLI debug_level=1 \ |
| force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA" \ |
| 0 \ |
| -C "bad certificate (usage extensions)" \ |
| -C "Processing of the Certificate handshake message failed" \ |
| -c "Ciphersuite is TLS-" |
| |
| run_test "keyUsage cli: DigitalSignature, RSA: fail" \ |
| "$O_SRV -key data_files/server2.key \ |
| -cert data_files/server2.ku-ds.crt" \ |
| "$P_CLI debug_level=1 \ |
| force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \ |
| 1 \ |
| -c "bad certificate (usage extensions)" \ |
| -c "Processing of the Certificate handshake message failed" \ |
| -C "Ciphersuite is TLS-" |
| |
| # Tests for keyUsage in leaf certificates, part 3: |
| # server-side checking of client cert |
| |
| run_test "keyUsage cli-auth: RSA, DigitalSignature: OK" \ |
| "$P_SRV debug_level=1 auth_mode=optional" \ |
| "$O_CLI -key data_files/server2.key \ |
| -cert data_files/server2.ku-ds.crt" \ |
| 0 \ |
| -S "bad certificate (usage extensions)" \ |
| -S "Processing of the Certificate handshake message failed" |
| |
| run_test "keyUsage cli-auth: RSA, KeyEncipherment: fail (soft)" \ |
| "$P_SRV debug_level=1 auth_mode=optional" \ |
| "$O_CLI -key data_files/server2.key \ |
| -cert data_files/server2.ku-ke.crt" \ |
| 0 \ |
| -s "bad certificate (usage extensions)" \ |
| -S "Processing of the Certificate handshake message failed" |
| |
| run_test "keyUsage cli-auth: RSA, KeyEncipherment: fail (hard)" \ |
| "$P_SRV debug_level=1 auth_mode=required" \ |
| "$O_CLI -key data_files/server2.key \ |
| -cert data_files/server2.ku-ke.crt" \ |
| 1 \ |
| -s "bad certificate (usage extensions)" \ |
| -s "Processing of the Certificate handshake message failed" |
| |
| run_test "keyUsage cli-auth: ECDSA, DigitalSignature: OK" \ |
| "$P_SRV debug_level=1 auth_mode=optional" \ |
| "$O_CLI -key data_files/server5.key \ |
| -cert data_files/server5.ku-ds.crt" \ |
| 0 \ |
| -S "bad certificate (usage extensions)" \ |
| -S "Processing of the Certificate handshake message failed" |
| |
| run_test "keyUsage cli-auth: ECDSA, KeyAgreement: fail (soft)" \ |
| "$P_SRV debug_level=1 auth_mode=optional" \ |
| "$O_CLI -key data_files/server5.key \ |
| -cert data_files/server5.ku-ka.crt" \ |
| 0 \ |
| -s "bad certificate (usage extensions)" \ |
| -S "Processing of the Certificate handshake message failed" |
| |
| # Tests for extendedKeyUsage, part 1: server-side certificate/suite selection |
| |
| run_test "extKeyUsage srv: serverAuth -> OK" \ |
| "$P_SRV key_file=data_files/server5.key \ |
| crt_file=data_files/server5.eku-srv.crt" \ |
| "$P_CLI" \ |
| 0 |
| |
| run_test "extKeyUsage srv: serverAuth,clientAuth -> OK" \ |
| "$P_SRV key_file=data_files/server5.key \ |
| crt_file=data_files/server5.eku-srv.crt" \ |
| "$P_CLI" \ |
| 0 |
| |
| run_test "extKeyUsage srv: codeSign,anyEKU -> OK" \ |
| "$P_SRV key_file=data_files/server5.key \ |
| crt_file=data_files/server5.eku-cs_any.crt" \ |
| "$P_CLI" \ |
| 0 |
| |
| # add psk to leave an option for client to send SERVERQUIT |
| run_test "extKeyUsage srv: codeSign -> fail" \ |
| "$P_SRV psk=abc123 key_file=data_files/server5.key \ |
| crt_file=data_files/server5.eku-cli.crt" \ |
| "$P_CLI psk=badbad" \ |
| 1 |
| |
| # Tests for extendedKeyUsage, part 2: client-side checking of server cert |
| |
| run_test "extKeyUsage cli: serverAuth -> OK" \ |
| "$O_SRV -key data_files/server5.key \ |
| -cert data_files/server5.eku-srv.crt" \ |
| "$P_CLI debug_level=1" \ |
| 0 \ |
| -C "bad certificate (usage extensions)" \ |
| -C "Processing of the Certificate handshake message failed" \ |
| -c "Ciphersuite is TLS-" |
| |
| run_test "extKeyUsage cli: serverAuth,clientAuth -> OK" \ |
| "$O_SRV -key data_files/server5.key \ |
| -cert data_files/server5.eku-srv_cli.crt" \ |
| "$P_CLI debug_level=1" \ |
| 0 \ |
| -C "bad certificate (usage extensions)" \ |
| -C "Processing of the Certificate handshake message failed" \ |
| -c "Ciphersuite is TLS-" |
| |
| run_test "extKeyUsage cli: codeSign,anyEKU -> OK" \ |
| "$O_SRV -key data_files/server5.key \ |
| -cert data_files/server5.eku-cs_any.crt" \ |
| "$P_CLI debug_level=1" \ |
| 0 \ |
| -C "bad certificate (usage extensions)" \ |
| -C "Processing of the Certificate handshake message failed" \ |
| -c "Ciphersuite is TLS-" |
| |
| run_test "extKeyUsage cli: codeSign -> fail" \ |
| "$O_SRV -key data_files/server5.key \ |
| -cert data_files/server5.eku-cs.crt" \ |
| "$P_CLI debug_level=1" \ |
| 1 \ |
| -c "bad certificate (usage extensions)" \ |
| -c "Processing of the Certificate handshake message failed" \ |
| -C "Ciphersuite is TLS-" |
| |
| # Tests for extendedKeyUsage, part 3: server-side checking of client cert |
| |
| run_test "extKeyUsage cli-auth: clientAuth -> OK" \ |
| "$P_SRV debug_level=1 auth_mode=optional" \ |
| "$O_CLI -key data_files/server5.key \ |
| -cert data_files/server5.eku-cli.crt" \ |
| 0 \ |
| -S "bad certificate (usage extensions)" \ |
| -S "Processing of the Certificate handshake message failed" |
| |
| run_test "extKeyUsage cli-auth: serverAuth,clientAuth -> OK" \ |
| "$P_SRV debug_level=1 auth_mode=optional" \ |
| "$O_CLI -key data_files/server5.key \ |
| -cert data_files/server5.eku-srv_cli.crt" \ |
| 0 \ |
| -S "bad certificate (usage extensions)" \ |
| -S "Processing of the Certificate handshake message failed" |
| |
| run_test "extKeyUsage cli-auth: codeSign,anyEKU -> OK" \ |
| "$P_SRV debug_level=1 auth_mode=optional" \ |
| "$O_CLI -key data_files/server5.key \ |
| -cert data_files/server5.eku-cs_any.crt" \ |
| 0 \ |
| -S "bad certificate (usage extensions)" \ |
| -S "Processing of the Certificate handshake message failed" |
| |
| run_test "extKeyUsage cli-auth: codeSign -> fail (soft)" \ |
| "$P_SRV debug_level=1 auth_mode=optional" \ |
| "$O_CLI -key data_files/server5.key \ |
| -cert data_files/server5.eku-cs.crt" \ |
| 0 \ |
| -s "bad certificate (usage extensions)" \ |
| -S "Processing of the Certificate handshake message failed" |
| |
| run_test "extKeyUsage cli-auth: codeSign -> fail (hard)" \ |
| "$P_SRV debug_level=1 auth_mode=required" \ |
| "$O_CLI -key data_files/server5.key \ |
| -cert data_files/server5.eku-cs.crt" \ |
| 1 \ |
| -s "bad certificate (usage extensions)" \ |
| -s "Processing of the Certificate handshake message failed" |
| |
| # Tests for DHM parameters loading |
| |
| run_test "DHM parameters: reference" \ |
| "$P_SRV" \ |
| "$P_CLI force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA \ |
| debug_level=3" \ |
| 0 \ |
| -c "value of 'DHM: P ' (2048 bits)" \ |
| -c "value of 'DHM: G ' (2048 bits)" |
| |
| run_test "DHM parameters: other parameters" \ |
| "$P_SRV dhm_file=data_files/dhparams.pem" \ |
| "$P_CLI force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA \ |
| debug_level=3" \ |
| 0 \ |
| -c "value of 'DHM: P ' (1024 bits)" \ |
| -c "value of 'DHM: G ' (2 bits)" |
| |
| # Tests for PSK callback |
| |
| run_test "PSK callback: psk, no callback" \ |
| "$P_SRV psk=abc123 psk_identity=foo" \ |
| "$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \ |
| psk_identity=foo psk=abc123" \ |
| 0 \ |
| -S "SSL - None of the common ciphersuites is usable" \ |
| -S "SSL - Unknown identity received" \ |
| -S "SSL - Verification of the message MAC failed" |
| |
| run_test "PSK callback: no psk, no callback" \ |
| "$P_SRV" \ |
| "$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \ |
| psk_identity=foo psk=abc123" \ |
| 1 \ |
| -s "SSL - None of the common ciphersuites is usable" \ |
| -S "SSL - Unknown identity received" \ |
| -S "SSL - Verification of the message MAC failed" |
| |
| run_test "PSK callback: callback overrides other settings" \ |
| "$P_SRV psk=abc123 psk_identity=foo psk_list=abc,dead,def,beef" \ |
| "$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \ |
| psk_identity=foo psk=abc123" \ |
| 1 \ |
| -S "SSL - None of the common ciphersuites is usable" \ |
| -s "SSL - Unknown identity received" \ |
| -S "SSL - Verification of the message MAC failed" |
| |
| run_test "PSK callback: first id matches" \ |
| "$P_SRV psk_list=abc,dead,def,beef" \ |
| "$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \ |
| psk_identity=abc psk=dead" \ |
| 0 \ |
| -S "SSL - None of the common ciphersuites is usable" \ |
| -S "SSL - Unknown identity received" \ |
| -S "SSL - Verification of the message MAC failed" |
| |
| run_test "PSK callback: second id matches" \ |
| "$P_SRV psk_list=abc,dead,def,beef" \ |
| "$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \ |
| psk_identity=def psk=beef" \ |
| 0 \ |
| -S "SSL - None of the common ciphersuites is usable" \ |
| -S "SSL - Unknown identity received" \ |
| -S "SSL - Verification of the message MAC failed" |
| |
| run_test "PSK callback: no match" \ |
| "$P_SRV psk_list=abc,dead,def,beef" \ |
| "$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \ |
| psk_identity=ghi psk=beef" \ |
| 1 \ |
| -S "SSL - None of the common ciphersuites is usable" \ |
| -s "SSL - Unknown identity received" \ |
| -S "SSL - Verification of the message MAC failed" |
| |
| run_test "PSK callback: wrong key" \ |
| "$P_SRV psk_list=abc,dead,def,beef" \ |
| "$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \ |
| psk_identity=abc psk=beef" \ |
| 1 \ |
| -S "SSL - None of the common ciphersuites is usable" \ |
| -S "SSL - Unknown identity received" \ |
| -s "SSL - Verification of the message MAC failed" |
| |
| # Tests for ciphersuites per version |
| |
| run_test "Per-version suites: SSL3" \ |
| "$P_SRV min_version=ssl3 version_suites=TLS-RSA-WITH-3DES-EDE-CBC-SHA,TLS-RSA-WITH-RC4-128-SHA,TLS-RSA-WITH-AES-128-CBC-SHA,TLS-RSA-WITH-AES-128-GCM-SHA256" \ |
| "$P_CLI force_version=ssl3" \ |
| 0 \ |
| -c "Ciphersuite is TLS-RSA-WITH-3DES-EDE-CBC-SHA" |
| |
| run_test "Per-version suites: TLS 1.0" \ |
| "$P_SRV arc4=1 version_suites=TLS-RSA-WITH-3DES-EDE-CBC-SHA,TLS-RSA-WITH-RC4-128-SHA,TLS-RSA-WITH-AES-128-CBC-SHA,TLS-RSA-WITH-AES-128-GCM-SHA256" \ |
| "$P_CLI force_version=tls1 arc4=1" \ |
| 0 \ |
| -c "Ciphersuite is TLS-RSA-WITH-RC4-128-SHA" |
| |
| run_test "Per-version suites: TLS 1.1" \ |
| "$P_SRV version_suites=TLS-RSA-WITH-3DES-EDE-CBC-SHA,TLS-RSA-WITH-RC4-128-SHA,TLS-RSA-WITH-AES-128-CBC-SHA,TLS-RSA-WITH-AES-128-GCM-SHA256" \ |
| "$P_CLI force_version=tls1_1" \ |
| 0 \ |
| -c "Ciphersuite is TLS-RSA-WITH-AES-128-CBC-SHA" |
| |
| run_test "Per-version suites: TLS 1.2" \ |
| "$P_SRV version_suites=TLS-RSA-WITH-3DES-EDE-CBC-SHA,TLS-RSA-WITH-RC4-128-SHA,TLS-RSA-WITH-AES-128-CBC-SHA,TLS-RSA-WITH-AES-128-GCM-SHA256" \ |
| "$P_CLI force_version=tls1_2" \ |
| 0 \ |
| -c "Ciphersuite is TLS-RSA-WITH-AES-128-GCM-SHA256" |
| |
| # Tests for ssl_get_bytes_avail() |
| |
| run_test "ssl_get_bytes_avail: no extra data" \ |
| "$P_SRV" \ |
| "$P_CLI request_size=100" \ |
| 0 \ |
| -s "Read from client: 100 bytes read$" |
| |
| run_test "ssl_get_bytes_avail: extra data" \ |
| "$P_SRV" \ |
| "$P_CLI request_size=500" \ |
| 0 \ |
| -s "Read from client: 500 bytes read (.*+.*)" |
| |
| # Tests for small packets |
| |
| run_test "Small packet SSLv3 BlockCipher" \ |
| "$P_SRV min_version=ssl3" \ |
| "$P_CLI request_size=1 force_version=ssl3 \ |
| force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \ |
| 0 \ |
| -s "Read from client: 1 bytes read" |
| |
| run_test "Small packet SSLv3 StreamCipher" \ |
| "$P_SRV min_version=ssl3 arc4=1" \ |
| "$P_CLI request_size=1 force_version=ssl3 \ |
| force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \ |
| 0 \ |
| -s "Read from client: 1 bytes read" |
| |
| run_test "Small packet TLS 1.0 BlockCipher" \ |
| "$P_SRV" \ |
| "$P_CLI request_size=1 force_version=tls1 \ |
| force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \ |
| 0 \ |
| -s "Read from client: 1 bytes read" |
| |
| run_test "Small packet TLS 1.0 BlockCipher without EtM" \ |
| "$P_SRV" \ |
| "$P_CLI request_size=1 force_version=tls1 etm=0 \ |
| force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \ |
| 0 \ |
| -s "Read from client: 1 bytes read" |
| |
| run_test "Small packet TLS 1.0 BlockCipher truncated MAC" \ |
| "$P_SRV" \ |
| "$P_CLI request_size=1 force_version=tls1 \ |
| force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA \ |
| trunc_hmac=1" \ |
| 0 \ |
| -s "Read from client: 1 bytes read" |
| |
| run_test "Small packet TLS 1.0 StreamCipher truncated MAC" \ |
| "$P_SRV arc4=1" \ |
| "$P_CLI request_size=1 force_version=tls1 \ |
| force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \ |
| trunc_hmac=1" \ |
| 0 \ |
| -s "Read from client: 1 bytes read" |
| |
| run_test "Small packet TLS 1.1 BlockCipher" \ |
| "$P_SRV" \ |
| "$P_CLI request_size=1 force_version=tls1_1 \ |
| force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \ |
| 0 \ |
| -s "Read from client: 1 bytes read" |
| |
| run_test "Small packet TLS 1.1 BlockCipher without EtM" \ |
| "$P_SRV" \ |
| "$P_CLI request_size=1 force_version=tls1_1 etm=0 \ |
| force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \ |
| 0 \ |
| -s "Read from client: 1 bytes read" |
| |
| run_test "Small packet TLS 1.1 StreamCipher" \ |
| "$P_SRV arc4=1" \ |
| "$P_CLI request_size=1 force_version=tls1_1 \ |
| force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \ |
| 0 \ |
| -s "Read from client: 1 bytes read" |
| |
| run_test "Small packet TLS 1.1 BlockCipher truncated MAC" \ |
| "$P_SRV" \ |
| "$P_CLI request_size=1 force_version=tls1_1 \ |
| force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA \ |
| trunc_hmac=1" \ |
| 0 \ |
| -s "Read from client: 1 bytes read" |
| |
| run_test "Small packet TLS 1.1 StreamCipher truncated MAC" \ |
| "$P_SRV arc4=1" \ |
| "$P_CLI request_size=1 force_version=tls1_1 \ |
| force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \ |
| trunc_hmac=1" \ |
| 0 \ |
| -s "Read from client: 1 bytes read" |
| |
| run_test "Small packet TLS 1.2 BlockCipher" \ |
| "$P_SRV" \ |
| "$P_CLI request_size=1 force_version=tls1_2 \ |
| force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \ |
| 0 \ |
| -s "Read from client: 1 bytes read" |
| |
| run_test "Small packet TLS 1.2 BlockCipher without EtM" \ |
| "$P_SRV" \ |
| "$P_CLI request_size=1 force_version=tls1_2 etm=0 \ |
| force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \ |
| 0 \ |
| -s "Read from client: 1 bytes read" |
| |
| run_test "Small packet TLS 1.2 BlockCipher larger MAC" \ |
| "$P_SRV" \ |
| "$P_CLI request_size=1 force_version=tls1_2 \ |
| force_ciphersuite=TLS-ECDHE-RSA-WITH-AES-256-CBC-SHA384" \ |
| 0 \ |
| -s "Read from client: 1 bytes read" |
| |
| run_test "Small packet TLS 1.2 BlockCipher truncated MAC" \ |
| "$P_SRV" \ |
| "$P_CLI request_size=1 force_version=tls1_2 \ |
| force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA \ |
| trunc_hmac=1" \ |
| 0 \ |
| -s "Read from client: 1 bytes read" |
| |
| run_test "Small packet TLS 1.2 StreamCipher" \ |
| "$P_SRV arc4=1" \ |
| "$P_CLI request_size=1 force_version=tls1_2 \ |
| force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \ |
| 0 \ |
| -s "Read from client: 1 bytes read" |
| |
| run_test "Small packet TLS 1.2 StreamCipher truncated MAC" \ |
| "$P_SRV arc4=1" \ |
| "$P_CLI request_size=1 force_version=tls1_2 \ |
| force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \ |
| trunc_hmac=1" \ |
| 0 \ |
| -s "Read from client: 1 bytes read" |
| |
| run_test "Small packet TLS 1.2 AEAD" \ |
| "$P_SRV" \ |
| "$P_CLI request_size=1 force_version=tls1_2 \ |
| force_ciphersuite=TLS-RSA-WITH-AES-256-CCM" \ |
| 0 \ |
| -s "Read from client: 1 bytes read" |
| |
| run_test "Small packet TLS 1.2 AEAD shorter tag" \ |
| "$P_SRV" \ |
| "$P_CLI request_size=1 force_version=tls1_2 \ |
| force_ciphersuite=TLS-RSA-WITH-AES-256-CCM-8" \ |
| 0 \ |
| -s "Read from client: 1 bytes read" |
| |
| # Test for large packets |
| |
| run_test "Large packet SSLv3 BlockCipher" \ |
| "$P_SRV min_version=ssl3" \ |
| "$P_CLI request_size=16384 force_version=ssl3 recsplit=0 \ |
| force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \ |
| 0 \ |
| -s "Read from client: 16384 bytes read" |
| |
| run_test "Large packet SSLv3 StreamCipher" \ |
| "$P_SRV min_version=ssl3 arc4=1" \ |
| "$P_CLI request_size=16384 force_version=ssl3 \ |
| force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \ |
| 0 \ |
| -s "Read from client: 16384 bytes read" |
| |
| run_test "Large packet TLS 1.0 BlockCipher" \ |
| "$P_SRV" \ |
| "$P_CLI request_size=16384 force_version=tls1 recsplit=0 \ |
| force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \ |
| 0 \ |
| -s "Read from client: 16384 bytes read" |
| |
| run_test "Large packet TLS 1.0 BlockCipher truncated MAC" \ |
| "$P_SRV" \ |
| "$P_CLI request_size=16384 force_version=tls1 recsplit=0 \ |
| force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA \ |
| trunc_hmac=1" \ |
| 0 \ |
| -s "Read from client: 16384 bytes read" |
| |
| run_test "Large packet TLS 1.0 StreamCipher truncated MAC" \ |
| "$P_SRV arc4=1" \ |
| "$P_CLI request_size=16384 force_version=tls1 \ |
| force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \ |
| trunc_hmac=1" \ |
| 0 \ |
| -s "Read from client: 16384 bytes read" |
| |
| run_test "Large packet TLS 1.1 BlockCipher" \ |
| "$P_SRV" \ |
| "$P_CLI request_size=16384 force_version=tls1_1 \ |
| force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \ |
| 0 \ |
| -s "Read from client: 16384 bytes read" |
| |
| run_test "Large packet TLS 1.1 StreamCipher" \ |
| "$P_SRV arc4=1" \ |
| "$P_CLI request_size=16384 force_version=tls1_1 \ |
| force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \ |
| 0 \ |
| -s "Read from client: 16384 bytes read" |
| |
| run_test "Large packet TLS 1.1 BlockCipher truncated MAC" \ |
| "$P_SRV" \ |
| "$P_CLI request_size=16384 force_version=tls1_1 \ |
| force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA \ |
| trunc_hmac=1" \ |
| 0 \ |
| -s "Read from client: 16384 bytes read" |
| |
| run_test "Large packet TLS 1.1 StreamCipher truncated MAC" \ |
| "$P_SRV arc4=1" \ |
| "$P_CLI request_size=16384 force_version=tls1_1 \ |
| force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \ |
| trunc_hmac=1" \ |
| 0 \ |
| -s "Read from client: 16384 bytes read" |
| |
| run_test "Large packet TLS 1.2 BlockCipher" \ |
| "$P_SRV" \ |
| "$P_CLI request_size=16384 force_version=tls1_2 \ |
| force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \ |
| 0 \ |
| -s "Read from client: 16384 bytes read" |
| |
| run_test "Large packet TLS 1.2 BlockCipher larger MAC" \ |
| "$P_SRV" \ |
| "$P_CLI request_size=16384 force_version=tls1_2 \ |
| force_ciphersuite=TLS-ECDHE-RSA-WITH-AES-256-CBC-SHA384" \ |
| 0 \ |
| -s "Read from client: 16384 bytes read" |
| |
| run_test "Large packet TLS 1.2 BlockCipher truncated MAC" \ |
| "$P_SRV" \ |
| "$P_CLI request_size=16384 force_version=tls1_2 \ |
| force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA \ |
| trunc_hmac=1" \ |
| 0 \ |
| -s "Read from client: 16384 bytes read" |
| |
| run_test "Large packet TLS 1.2 StreamCipher" \ |
| "$P_SRV arc4=1" \ |
| "$P_CLI request_size=16384 force_version=tls1_2 \ |
| force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \ |
| 0 \ |
| -s "Read from client: 16384 bytes read" |
| |
| run_test "Large packet TLS 1.2 StreamCipher truncated MAC" \ |
| "$P_SRV arc4=1" \ |
| "$P_CLI request_size=16384 force_version=tls1_2 \ |
| force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \ |
| trunc_hmac=1" \ |
| 0 \ |
| -s "Read from client: 16384 bytes read" |
| |
| run_test "Large packet TLS 1.2 AEAD" \ |
| "$P_SRV" \ |
| "$P_CLI request_size=16384 force_version=tls1_2 \ |
| force_ciphersuite=TLS-RSA-WITH-AES-256-CCM" \ |
| 0 \ |
| -s "Read from client: 16384 bytes read" |
| |
| run_test "Large packet TLS 1.2 AEAD shorter tag" \ |
| "$P_SRV" \ |
| "$P_CLI request_size=16384 force_version=tls1_2 \ |
| force_ciphersuite=TLS-RSA-WITH-AES-256-CCM-8" \ |
| 0 \ |
| -s "Read from client: 16384 bytes read" |
| |
| # Final report |
| |
| echo "------------------------------------------------------------------------" |
| |
| if [ $FAILS = 0 ]; then |
| printf "PASSED" |
| else |
| printf "FAILED" |
| fi |
| PASSES=$(( $TESTS - $FAILS )) |
| echo " ($PASSES / $TESTS tests ($SKIPS skipped))" |
| |
| exit $FAILS |