| /** |
| * \file config.h |
| * |
| * \brief Configuration options (set of defines) |
| * |
| * Copyright (C) 2006-2014, Brainspark B.V. |
| * |
| * This file is part of PolarSSL (http://www.polarssl.org) |
| * Lead Maintainer: Paul Bakker <polarssl_maintainer at polarssl.org> |
| * |
| * All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. |
| * |
| * This set of compile-time options may be used to enable |
| * or disable features selectively, and reduce the global |
| * memory footprint. |
| */ |
| #ifndef POLARSSL_CONFIG_H |
| #define POLARSSL_CONFIG_H |
| |
| #if defined(_MSC_VER) && !defined(_CRT_SECURE_NO_DEPRECATE) |
| #define _CRT_SECURE_NO_DEPRECATE 1 |
| #endif |
| |
| /** |
| * \name SECTION: System support |
| * |
| * This section sets system specific settings. |
| * \{ |
| */ |
| |
| /** |
| * \def POLARSSL_HAVE_INT8 |
| * |
| * The system uses 8-bit wide native integers. |
| * |
| * Uncomment if native integers are 8-bit wide. |
| */ |
| //#define POLARSSL_HAVE_INT8 |
| |
| /** |
| * \def POLARSSL_HAVE_INT16 |
| * |
| * The system uses 16-bit wide native integers. |
| * |
| * Uncomment if native integers are 16-bit wide. |
| */ |
| //#define POLARSSL_HAVE_INT16 |
| |
| /** |
| * \def POLARSSL_HAVE_LONGLONG |
| * |
| * The compiler supports the 'long long' type. |
| * (Only used on 32-bit platforms) |
| */ |
| #define POLARSSL_HAVE_LONGLONG |
| |
| /** |
| * \def POLARSSL_HAVE_ASM |
| * |
| * The compiler has support for asm(). |
| * |
| * Requires support for asm() in compiler. |
| * |
| * Used in: |
| * library/timing.c |
| * library/padlock.c |
| * include/polarssl/bn_mul.h |
| * |
| * Comment to disable the use of assembly code. |
| */ |
| #define POLARSSL_HAVE_ASM |
| |
| /** |
| * \def POLARSSL_HAVE_SSE2 |
| * |
| * CPU supports SSE2 instruction set. |
| * |
| * Uncomment if the CPU supports SSE2 (IA-32 specific). |
| */ |
| //#define POLARSSL_HAVE_SSE2 |
| |
| /** |
| * \def POLARSSL_HAVE_TIME |
| * |
| * System has time.h and time() / localtime() / gettimeofday(). |
| * |
| * Comment if your system does not support time functions |
| */ |
| #define POLARSSL_HAVE_TIME |
| |
| /** |
| * \def POLARSSL_HAVE_IPV6 |
| * |
| * System supports the basic socket interface for IPv6 (RFC 3493), |
| * specifically getaddrinfo(), freeaddrinfo() and struct sockaddr_storage. |
| * |
| * Note: on Windows/MingW, XP or higher is required. |
| * |
| * Comment if your system does not support the IPv6 socket interface |
| */ |
| #define POLARSSL_HAVE_IPV6 |
| |
| /** |
| * \def POLARSSL_PLATFORM_MEMORY |
| * |
| * Enable the memory allocation layer. |
| * |
| * By default PolarSSL uses the system-provided malloc() and free(). |
| * This allows different allocators (self-implemented or provided) to be |
| * provided to the platform abstraction layer. |
| * |
| * Enabling POLARSSL_PLATFORM_MEMORY will provide "platform_set_malloc_free()" |
| * to allow you to set an alternative malloc() and free() function pointer. |
| * |
| * Requires: POLARSSL_PLATFORM_C |
| * |
| * Enable this layer to allow use of alternative memory allocators. |
| */ |
| //#define POLARSSL_PLATFORM_MEMORY |
| |
| /** |
| * \def POLARSSL_PLATFORM_NO_STD_FUNCTIONS |
| * |
| * Do not assign standard functions in the platform layer (e.g. malloc() to |
| * POLARSSL_PLATFORM_STD_MALLOC and printf() to POLARSSL_PLATFORM_STD_PRINTF) |
| * |
| * This makes sure there are no linking errors on platforms that do not support |
| * these functions. You will HAVE to provide alternatives, either at runtime |
| * via the platform_set_xxx() functions or at compile time by setting |
| * the POLARSSL_PLATFORM_STD_XXX defines. |
| * |
| * Requires: POLARSSL_PLATFORM_C |
| * |
| * Uncomment to prevent default assignment of standard functions in the |
| * platform layer. |
| */ |
| //#define POLARSSL_PLATFORM_NO_STD_FUNCTIONS |
| |
| /** |
| * \def POLARSSL_PLATFORM_XXX_ALT |
| * |
| * Uncomment a macro to let PolarSSL support the function in the platform |
| * abstraction layer. |
| * |
| * Example: In case you uncomment POLARSSL_PLATFORM_PRINTF_ALT, PolarSSL will |
| * provide a function "platform_set_printf()" that allows you to set an |
| * alternative printf function pointer. |
| * |
| * All these define require POLARSSL_PLATFORM_C to be defined! |
| * |
| * Uncomment a macro to enable alternate implementation of specific base |
| * platform function |
| */ |
| //#define POLARSSL_PLATFORM_PRINTF_ALT |
| //#define POLARSSL_PLATFORM_FPRINTF_ALT |
| /* \} name SECTION: System support */ |
| |
| /** |
| * \name SECTION: PolarSSL feature support |
| * |
| * This section sets support for features that are or are not needed |
| * within the modules that are enabled. |
| * \{ |
| */ |
| |
| /** |
| * \def POLARSSL_TIMING_ALT |
| * |
| * Uncomment to provide your own alternate implementation for hardclock(), |
| * get_timer(), set_alarm() and m_sleep(). |
| * |
| * Only works if you have POLARSSL_TIMING_C enabled. |
| * |
| * You will need to provide a header "timing_alt.h" and an implementation at |
| * compile time. |
| */ |
| //#define POLARSSL_TIMING_ALT |
| |
| /** |
| * \def POLARSSL_XXX_ALT |
| * |
| * Uncomment a macro to let PolarSSL use your alternate core implementation of |
| * a symmetric or hash algorithm (e.g. platform specific assembly optimized |
| * implementations). Keep in mind that the function prototypes should remain |
| * the same. |
| * |
| * Example: In case you uncomment POLARSSL_AES_ALT, PolarSSL will no longer |
| * provide the "struct aes_context" definition and omit the base function |
| * declarations and implementations. "aes_alt.h" will be included from |
| * "aes.h" to include the new function definitions. |
| * |
| * Uncomment a macro to enable alternate implementation for core algorithm |
| * functions |
| */ |
| //#define POLARSSL_AES_ALT |
| //#define POLARSSL_ARC4_ALT |
| //#define POLARSSL_BLOWFISH_ALT |
| //#define POLARSSL_CAMELLIA_ALT |
| //#define POLARSSL_DES_ALT |
| //#define POLARSSL_XTEA_ALT |
| //#define POLARSSL_MD2_ALT |
| //#define POLARSSL_MD4_ALT |
| //#define POLARSSL_MD5_ALT |
| //#define POLARSSL_RIPEMD160_ALT |
| //#define POLARSSL_SHA1_ALT |
| //#define POLARSSL_SHA256_ALT |
| //#define POLARSSL_SHA512_ALT |
| |
| /** |
| * \def POLARSSL_AES_ROM_TABLES |
| * |
| * Store the AES tables in ROM. |
| * |
| * Uncomment this macro to store the AES tables in ROM. |
| * |
| */ |
| //#define POLARSSL_AES_ROM_TABLES |
| |
| /** |
| * \def POLARSSL_CIPHER_MODE_CBC |
| * |
| * Enable Cipher Block Chaining mode (CBC) for symmetric ciphers. |
| */ |
| #define POLARSSL_CIPHER_MODE_CBC |
| |
| /** |
| * \def POLARSSL_CIPHER_MODE_CFB |
| * |
| * Enable Cipher Feedback mode (CFB) for symmetric ciphers. |
| */ |
| #define POLARSSL_CIPHER_MODE_CFB |
| |
| /** |
| * \def POLARSSL_CIPHER_MODE_CTR |
| * |
| * Enable Counter Block Cipher mode (CTR) for symmetric ciphers. |
| */ |
| #define POLARSSL_CIPHER_MODE_CTR |
| |
| /** |
| * \def POLARSSL_CIPHER_NULL_CIPHER |
| * |
| * Enable NULL cipher. |
| * Warning: Only do so when you know what you are doing. This allows for |
| * encryption or channels without any security! |
| * |
| * Requires POLARSSL_ENABLE_WEAK_CIPHERSUITES as well to enable |
| * the following ciphersuites: |
| * TLS_ECDH_ECDSA_WITH_NULL_SHA |
| * TLS_ECDH_RSA_WITH_NULL_SHA |
| * TLS_ECDHE_ECDSA_WITH_NULL_SHA |
| * TLS_ECDHE_RSA_WITH_NULL_SHA |
| * TLS_ECDHE_PSK_WITH_NULL_SHA384 |
| * TLS_ECDHE_PSK_WITH_NULL_SHA256 |
| * TLS_ECDHE_PSK_WITH_NULL_SHA |
| * TLS_DHE_PSK_WITH_NULL_SHA384 |
| * TLS_DHE_PSK_WITH_NULL_SHA256 |
| * TLS_DHE_PSK_WITH_NULL_SHA |
| * TLS_RSA_WITH_NULL_SHA256 |
| * TLS_RSA_WITH_NULL_SHA |
| * TLS_RSA_WITH_NULL_MD5 |
| * TLS_RSA_PSK_WITH_NULL_SHA384 |
| * TLS_RSA_PSK_WITH_NULL_SHA256 |
| * TLS_RSA_PSK_WITH_NULL_SHA |
| * TLS_PSK_WITH_NULL_SHA384 |
| * TLS_PSK_WITH_NULL_SHA256 |
| * TLS_PSK_WITH_NULL_SHA |
| * |
| * Uncomment this macro to enable the NULL cipher and ciphersuites |
| */ |
| //#define POLARSSL_CIPHER_NULL_CIPHER |
| |
| /** |
| * \def POLARSSL_CIPHER_PADDING_XXX |
| * |
| * Uncomment or comment macros to add support for specific padding modes |
| * in the cipher layer with cipher modes that support padding (e.g. CBC) |
| * |
| * If you disable all padding modes, only full blocks can be used with CBC. |
| * |
| * Enable padding modes in the cipher layer. |
| */ |
| #define POLARSSL_CIPHER_PADDING_PKCS7 |
| #define POLARSSL_CIPHER_PADDING_ONE_AND_ZEROS |
| #define POLARSSL_CIPHER_PADDING_ZEROS_AND_LEN |
| #define POLARSSL_CIPHER_PADDING_ZEROS |
| |
| /** |
| * \def POLARSSL_ENABLE_WEAK_CIPHERSUITES |
| * |
| * Enable weak ciphersuites in SSL / TLS. |
| * Warning: Only do so when you know what you are doing. This allows for |
| * channels with virtually no security at all! |
| * |
| * This enables the following ciphersuites: |
| * TLS_RSA_WITH_DES_CBC_SHA |
| * TLS_DHE_RSA_WITH_DES_CBC_SHA |
| * |
| * Uncomment this macro to enable weak ciphersuites |
| */ |
| //#define POLARSSL_ENABLE_WEAK_CIPHERSUITES |
| |
| /** |
| * \def POLARSSL_REMOVE_ARC4_CIPHERSUITES |
| * |
| * Remove RC4 ciphersuites by default in SSL / TLS. |
| * This flag removes the ciphersuites based on RC4 from the default list as |
| * returned by ssl_list_ciphersuites(). However, it is still possible to |
| * enable (some of) them with ssl_set_ciphersuites() by including them |
| * explicitly. |
| * |
| * Uncomment this macro to remove RC4 ciphersuites by default. |
| */ |
| //#define POLARSSL_REMOVE_ARC4_CIPHERSUITES |
| |
| /** |
| * \def POLARSSL_ECP_XXXX_ENABLED |
| * |
| * Enables specific curves within the Elliptic Curve module. |
| * By default all supported curves are enabled. |
| * |
| * Comment macros to disable the curve and functions for it |
| */ |
| #define POLARSSL_ECP_DP_SECP192R1_ENABLED |
| #define POLARSSL_ECP_DP_SECP224R1_ENABLED |
| #define POLARSSL_ECP_DP_SECP256R1_ENABLED |
| #define POLARSSL_ECP_DP_SECP384R1_ENABLED |
| #define POLARSSL_ECP_DP_SECP521R1_ENABLED |
| #define POLARSSL_ECP_DP_SECP192K1_ENABLED |
| #define POLARSSL_ECP_DP_SECP224K1_ENABLED |
| #define POLARSSL_ECP_DP_SECP256K1_ENABLED |
| #define POLARSSL_ECP_DP_BP256R1_ENABLED |
| #define POLARSSL_ECP_DP_BP384R1_ENABLED |
| #define POLARSSL_ECP_DP_BP512R1_ENABLED |
| //#define POLARSSL_ECP_DP_M221_ENABLED // Not implemented yet! |
| #define POLARSSL_ECP_DP_M255_ENABLED |
| //#define POLARSSL_ECP_DP_M383_ENABLED // Not implemented yet! |
| //#define POLARSSL_ECP_DP_M511_ENABLED // Not implemented yet! |
| |
| /** |
| * \def POLARSSL_ECP_NIST_OPTIM |
| * |
| * Enable specific 'modulo p' routines for each NIST prime. |
| * Depending on the prime and architecture, makes operations 4 to 8 times |
| * faster on the corresponding curve. |
| * |
| * Comment this macro to disable NIST curves optimisation. |
| */ |
| #define POLARSSL_ECP_NIST_OPTIM |
| |
| /** |
| * \def POLARSSL_ECDSA_DETERMINISTIC |
| * |
| * Enable deterministic ECDSA (RFC 6979). |
| * Standard ECDSA is "fragile" in the sense that lack of entropy when signing |
| * may result in a compromise of the long-term signing key. This is avoided by |
| * the deterministic variant. |
| * |
| * Requires: POLARSSL_HMAC_DRBG_C |
| * |
| * Comment this macro to disable deterministic ECDSA. |
| */ |
| #define POLARSSL_ECDSA_DETERMINISTIC |
| |
| /** |
| * \def POLARSSL_KEY_EXCHANGE_PSK_ENABLED |
| * |
| * Enable the PSK based ciphersuite modes in SSL / TLS. |
| * |
| * This enables the following ciphersuites (if other requisites are |
| * enabled as well): |
| * TLS_PSK_WITH_AES_256_GCM_SHA384 |
| * TLS_PSK_WITH_AES_256_CBC_SHA384 |
| * TLS_PSK_WITH_AES_256_CBC_SHA |
| * TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384 |
| * TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384 |
| * TLS_PSK_WITH_AES_128_GCM_SHA256 |
| * TLS_PSK_WITH_AES_128_CBC_SHA256 |
| * TLS_PSK_WITH_AES_128_CBC_SHA |
| * TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256 |
| * TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256 |
| * TLS_PSK_WITH_3DES_EDE_CBC_SHA |
| * TLS_PSK_WITH_RC4_128_SHA |
| */ |
| #define POLARSSL_KEY_EXCHANGE_PSK_ENABLED |
| |
| /** |
| * \def POLARSSL_KEY_EXCHANGE_DHE_PSK_ENABLED |
| * |
| * Enable the DHE-PSK based ciphersuite modes in SSL / TLS. |
| * |
| * Requires: POLARSSL_DHM_C |
| * |
| * This enables the following ciphersuites (if other requisites are |
| * enabled as well): |
| * TLS_DHE_PSK_WITH_AES_256_GCM_SHA384 |
| * TLS_DHE_PSK_WITH_AES_256_CBC_SHA384 |
| * TLS_DHE_PSK_WITH_AES_256_CBC_SHA |
| * TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384 |
| * TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 |
| * TLS_DHE_PSK_WITH_AES_128_GCM_SHA256 |
| * TLS_DHE_PSK_WITH_AES_128_CBC_SHA256 |
| * TLS_DHE_PSK_WITH_AES_128_CBC_SHA |
| * TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256 |
| * TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 |
| * TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA |
| * TLS_DHE_PSK_WITH_RC4_128_SHA |
| */ |
| #define POLARSSL_KEY_EXCHANGE_DHE_PSK_ENABLED |
| |
| /** |
| * \def POLARSSL_KEY_EXCHANGE_ECDHE_PSK_ENABLED |
| * |
| * Enable the ECDHE-PSK based ciphersuite modes in SSL / TLS. |
| * |
| * Requires: POLARSSL_ECDH_C |
| * |
| * This enables the following ciphersuites (if other requisites are |
| * enabled as well): |
| * TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384 |
| * TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA |
| * TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 |
| * TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256 |
| * TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA |
| * TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 |
| * TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA |
| * TLS_ECDHE_PSK_WITH_RC4_128_SHA |
| */ |
| #define POLARSSL_KEY_EXCHANGE_ECDHE_PSK_ENABLED |
| |
| /** |
| * \def POLARSSL_KEY_EXCHANGE_RSA_PSK_ENABLED |
| * |
| * Enable the RSA-PSK based ciphersuite modes in SSL / TLS. |
| * |
| * Requires: POLARSSL_RSA_C, POLARSSL_PKCS1_V15, |
| * POLARSSL_X509_CRT_PARSE_C |
| * |
| * This enables the following ciphersuites (if other requisites are |
| * enabled as well): |
| * TLS_RSA_PSK_WITH_AES_256_GCM_SHA384 |
| * TLS_RSA_PSK_WITH_AES_256_CBC_SHA384 |
| * TLS_RSA_PSK_WITH_AES_256_CBC_SHA |
| * TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384 |
| * TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384 |
| * TLS_RSA_PSK_WITH_AES_128_GCM_SHA256 |
| * TLS_RSA_PSK_WITH_AES_128_CBC_SHA256 |
| * TLS_RSA_PSK_WITH_AES_128_CBC_SHA |
| * TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256 |
| * TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256 |
| * TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA |
| * TLS_RSA_PSK_WITH_RC4_128_SHA |
| */ |
| #define POLARSSL_KEY_EXCHANGE_RSA_PSK_ENABLED |
| |
| /** |
| * \def POLARSSL_KEY_EXCHANGE_RSA_ENABLED |
| * |
| * Enable the RSA-only based ciphersuite modes in SSL / TLS. |
| * |
| * Requires: POLARSSL_RSA_C, POLARSSL_PKCS1_V15, |
| * POLARSSL_X509_CRT_PARSE_C |
| * |
| * This enables the following ciphersuites (if other requisites are |
| * enabled as well): |
| * TLS_RSA_WITH_AES_256_GCM_SHA384 |
| * TLS_RSA_WITH_AES_256_CBC_SHA256 |
| * TLS_RSA_WITH_AES_256_CBC_SHA |
| * TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384 |
| * TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256 |
| * TLS_RSA_WITH_CAMELLIA_256_CBC_SHA |
| * TLS_RSA_WITH_AES_128_GCM_SHA256 |
| * TLS_RSA_WITH_AES_128_CBC_SHA256 |
| * TLS_RSA_WITH_AES_128_CBC_SHA |
| * TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256 |
| * TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256 |
| * TLS_RSA_WITH_CAMELLIA_128_CBC_SHA |
| * TLS_RSA_WITH_3DES_EDE_CBC_SHA |
| * TLS_RSA_WITH_RC4_128_SHA |
| * TLS_RSA_WITH_RC4_128_MD5 |
| */ |
| #define POLARSSL_KEY_EXCHANGE_RSA_ENABLED |
| |
| /** |
| * \def POLARSSL_KEY_EXCHANGE_DHE_RSA_ENABLED |
| * |
| * Enable the DHE-RSA based ciphersuite modes in SSL / TLS. |
| * |
| * Requires: POLARSSL_DHM_C, POLARSSL_RSA_C, POLARSSL_PKCS1_V15, |
| * POLARSSL_X509_CRT_PARSE_C |
| * |
| * This enables the following ciphersuites (if other requisites are |
| * enabled as well): |
| * TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 |
| * TLS_DHE_RSA_WITH_AES_256_CBC_SHA256 |
| * TLS_DHE_RSA_WITH_AES_256_CBC_SHA |
| * TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 |
| * TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256 |
| * TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA |
| * TLS_DHE_RSA_WITH_AES_128_GCM_SHA256 |
| * TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 |
| * TLS_DHE_RSA_WITH_AES_128_CBC_SHA |
| * TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 |
| * TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 |
| * TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA |
| * TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA |
| */ |
| #define POLARSSL_KEY_EXCHANGE_DHE_RSA_ENABLED |
| |
| /** |
| * \def POLARSSL_KEY_EXCHANGE_ECDHE_RSA_ENABLED |
| * |
| * Enable the ECDHE-RSA based ciphersuite modes in SSL / TLS. |
| * |
| * Requires: POLARSSL_ECDH_C, POLARSSL_RSA_C, POLARSSL_PKCS1_V15, |
| * POLARSSL_X509_CRT_PARSE_C |
| * |
| * This enables the following ciphersuites (if other requisites are |
| * enabled as well): |
| * TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 |
| * TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384 |
| * TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA |
| * TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 |
| * TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384 |
| * TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 |
| * TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 |
| * TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA |
| * TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 |
| * TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 |
| * TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA |
| * TLS_ECDHE_RSA_WITH_RC4_128_SHA |
| */ |
| #define POLARSSL_KEY_EXCHANGE_ECDHE_RSA_ENABLED |
| |
| /** |
| * \def POLARSSL_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED |
| * |
| * Enable the ECDHE-ECDSA based ciphersuite modes in SSL / TLS. |
| * |
| * Requires: POLARSSL_ECDH_C, POLARSSL_ECDSA_C, POLARSSL_X509_CRT_PARSE_C, |
| * |
| * This enables the following ciphersuites (if other requisites are |
| * enabled as well): |
| * TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 |
| * TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384 |
| * TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA |
| * TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 |
| * TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 |
| * TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 |
| * TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 |
| * TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA |
| * TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 |
| * TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 |
| * TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA |
| * TLS_ECDHE_ECDSA_WITH_RC4_128_SHA |
| */ |
| #define POLARSSL_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED |
| |
| /** |
| * \def POLARSSL_KEY_EXCHANGE_ECDH_ECDSA_ENABLED |
| * |
| * Enable the ECDH-ECDSA based ciphersuite modes in SSL / TLS. |
| * |
| * Requires: POLARSSL_ECDH_C, POLARSSL_X509_CRT_PARSE_C |
| * |
| * This enables the following ciphersuites (if other requisites are |
| * enabled as well): |
| * TLS_ECDH_ECDSA_WITH_RC4_128_SHA |
| * TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA |
| * TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA |
| * TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA |
| * TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256 |
| * TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384 |
| * TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256 |
| * TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384 |
| * TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 |
| * TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 |
| * TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 |
| * TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 |
| */ |
| #define POLARSSL_KEY_EXCHANGE_ECDH_ECDSA_ENABLED |
| |
| /** |
| * \def POLARSSL_KEY_EXCHANGE_ECDH_RSA_ENABLED |
| * |
| * Enable the ECDH-RSA based ciphersuite modes in SSL / TLS. |
| * |
| * Requires: POLARSSL_ECDH_C, POLARSSL_X509_CRT_PARSE_C |
| * |
| * This enables the following ciphersuites (if other requisites are |
| * enabled as well): |
| * TLS_ECDH_RSA_WITH_RC4_128_SHA |
| * TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA |
| * TLS_ECDH_RSA_WITH_AES_128_CBC_SHA |
| * TLS_ECDH_RSA_WITH_AES_256_CBC_SHA |
| * TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256 |
| * TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384 |
| * TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256 |
| * TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384 |
| * TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256 |
| * TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384 |
| * TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256 |
| * TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384 |
| */ |
| #define POLARSSL_KEY_EXCHANGE_ECDH_RSA_ENABLED |
| |
| /** |
| * \def POLARSSL_PK_PARSE_EC_EXTENDED |
| * |
| * Enhance support for reading EC keys using variants of SEC1 not allowed by |
| * RFC 5915 and RFC 5480. |
| * |
| * Currently this means parsing the SpecifiedECDomain choice of EC |
| * parameters (only known groups are supported, not arbitrary domains, to |
| * avoid validation issues). |
| * |
| * Disable if you only need to support RFC 5915 + 5480 key formats. |
| */ |
| #define POLARSSL_PK_PARSE_EC_EXTENDED |
| |
| /** |
| * \def POLARSSL_ERROR_STRERROR_BC |
| * |
| * Make available the backward compatible error_strerror() next to the |
| * current polarssl_strerror(). |
| * |
| * For new code, it is recommended to use polarssl_strerror() instead and |
| * disable this. |
| * |
| * Disable if you run into name conflicts and want to really remove the |
| * error_strerror() |
| */ |
| #define POLARSSL_ERROR_STRERROR_BC |
| |
| /** |
| * \def POLARSSL_ERROR_STRERROR_DUMMY |
| * |
| * Enable a dummy error function to make use of polarssl_strerror() in |
| * third party libraries easier when POLARSSL_ERROR_C is disabled |
| * (no effect when POLARSSL_ERROR_C is enabled). |
| * |
| * You can safely disable this if POLARSSL_ERROR_C is enabled, or if you're |
| * not using polarssl_strerror() or error_strerror() in your application. |
| * |
| * Disable if you run into name conflicts and want to really remove the |
| * polarssl_strerror() |
| */ |
| #define POLARSSL_ERROR_STRERROR_DUMMY |
| |
| /** |
| * \def POLARSSL_GENPRIME |
| * |
| * Enable the prime-number generation code. |
| * |
| * Requires: POLARSSL_BIGNUM_C |
| */ |
| #define POLARSSL_GENPRIME |
| |
| /** |
| * \def POLARSSL_FS_IO |
| * |
| * Enable functions that use the filesystem. |
| */ |
| #define POLARSSL_FS_IO |
| |
| /** |
| * \def POLARSSL_NO_DEFAULT_ENTROPY_SOURCES |
| * |
| * Do not add default entropy sources. These are the platform specific, |
| * hardclock and HAVEGE based poll functions. |
| * |
| * This is useful to have more control over the added entropy sources in an |
| * application. |
| * |
| * Uncomment this macro to prevent loading of default entropy functions. |
| */ |
| //#define POLARSSL_NO_DEFAULT_ENTROPY_SOURCES |
| |
| /** |
| * \def POLARSSL_NO_PLATFORM_ENTROPY |
| * |
| * Do not use built-in platform entropy functions. |
| * This is useful if your platform does not support |
| * standards like the /dev/urandom or Windows CryptoAPI. |
| * |
| * Uncomment this macro to disable the built-in platform entropy functions. |
| */ |
| //#define POLARSSL_NO_PLATFORM_ENTROPY |
| |
| /** |
| * \def POLARSSL_ENTROPY_FORCE_SHA256 |
| * |
| * Force the entropy accumulator to use a SHA-256 accumulator instead of the |
| * default SHA-512 based one (if both are available). |
| * |
| * Requires: POLARSSL_SHA256_C |
| * |
| * On 32-bit systems SHA-256 can be much faster than SHA-512. Use this option |
| * if you have performance concerns. |
| * |
| * This option is only useful if both POLARSSL_SHA256_C and |
| * POLARSSL_SHA512_C are defined. Otherwise the available hash module is used. |
| */ |
| //#define POLARSSL_ENTROPY_FORCE_SHA256 |
| |
| /** |
| * \def POLARSSL_MEMORY_DEBUG |
| * |
| * Enable debugging of buffer allocator memory issues. Automatically prints |
| * (to stderr) all (fatal) messages on memory allocation issues. Enables |
| * function for 'debug output' of allocated memory. |
| * |
| * Requires: POLARSSL_MEMORY_BUFFER_ALLOC_C |
| * |
| * Uncomment this macro to let the buffer allocator print out error messages. |
| */ |
| //#define POLARSSL_MEMORY_DEBUG |
| |
| /** |
| * \def POLARSSL_MEMORY_BACKTRACE |
| * |
| * Include backtrace information with each allocated block. |
| * |
| * Requires: POLARSSL_MEMORY_BUFFER_ALLOC_C |
| * GLIBC-compatible backtrace() an backtrace_symbols() support |
| * |
| * Uncomment this macro to include backtrace information |
| */ |
| //#define POLARSSL_MEMORY_BACKTRACE |
| |
| /** |
| * \def POLARSSL_PKCS1_V15 |
| * |
| * Enable support for PKCS#1 v1.5 encoding. |
| * |
| * Requires: POLARSSL_RSA_C |
| * |
| * This enables support for PKCS#1 v1.5 operations. |
| */ |
| #define POLARSSL_PKCS1_V15 |
| |
| /** |
| * \def POLARSSL_PKCS1_V21 |
| * |
| * Enable support for PKCS#1 v2.1 encoding. |
| * |
| * Requires: POLARSSL_MD_C, POLARSSL_RSA_C |
| * |
| * This enables support for RSAES-OAEP and RSASSA-PSS operations. |
| */ |
| #define POLARSSL_PKCS1_V21 |
| |
| /** |
| * \def POLARSSL_RSA_NO_CRT |
| * |
| * Do not use the Chinese Remainder Theorem for the RSA private operation. |
| * |
| * Uncomment this macro to disable the use of CRT in RSA. |
| * |
| */ |
| //#define POLARSSL_RSA_NO_CRT |
| |
| /** |
| * \def POLARSSL_SELF_TEST |
| * |
| * Enable the checkup functions (*_self_test). |
| */ |
| #define POLARSSL_SELF_TEST |
| |
| /** |
| * \def POLARSSL_SSL_ALL_ALERT_MESSAGES |
| * |
| * Enable sending of alert messages in case of encountered errors as per RFC. |
| * If you choose not to send the alert messages, PolarSSL can still communicate |
| * with other servers, only debugging of failures is harder. |
| * |
| * The advantage of not sending alert messages, is that no information is given |
| * about reasons for failures thus preventing adversaries of gaining intel. |
| * |
| * Enable sending of all alert messages |
| */ |
| #define POLARSSL_SSL_ALERT_MESSAGES |
| |
| /** |
| * \def POLARSSL_SSL_DEBUG_ALL |
| * |
| * Enable the debug messages in SSL module for all issues. |
| * Debug messages have been disabled in some places to prevent timing |
| * attacks due to (unbalanced) debugging function calls. |
| * |
| * If you need all error reporting you should enable this during debugging, |
| * but remove this for production servers that should log as well. |
| * |
| * Uncomment this macro to report all debug messages on errors introducing |
| * a timing side-channel. |
| * |
| */ |
| //#define POLARSSL_SSL_DEBUG_ALL |
| |
| /** |
| * \def POLARSSL_SSL_HW_RECORD_ACCEL |
| * |
| * Enable hooking functions in SSL module for hardware acceleration of |
| * individual records. |
| * |
| * Uncomment this macro to enable hooking functions. |
| */ |
| //#define POLARSSL_SSL_HW_RECORD_ACCEL |
| |
| /** |
| * \def POLARSSL_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO |
| * |
| * Enable support for receiving and parsing SSLv2 Client Hello messages for the |
| * SSL Server module (POLARSSL_SSL_SRV_C). |
| * |
| * Comment this macro to disable support for SSLv2 Client Hello messages. |
| */ |
| #define POLARSSL_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO |
| |
| /** |
| * \def POLARSSL_SSL_SRV_RESPECT_CLIENT_PREFERENCE |
| * |
| * Pick the ciphersuite according to the client's preferences rather than ours |
| * in the SSL Server module (POLARSSL_SSL_SRV_C). |
| * |
| * Uncomment this macro to respect client's ciphersuite order |
| */ |
| //#define POLARSSL_SSL_SRV_RESPECT_CLIENT_PREFERENCE |
| |
| /** |
| * \def POLARSSL_SSL_MAX_FRAGMENT_LENGTH |
| * |
| * Enable support for RFC 6066 max_fragment_length extension in SSL. |
| * |
| * Comment this macro to disable support for the max_fragment_length extension |
| */ |
| #define POLARSSL_SSL_MAX_FRAGMENT_LENGTH |
| |
| /** |
| * \def POLARSSL_SSL_PROTO_SSL3 |
| * |
| * Enable support for SSL 3.0. |
| * |
| * Requires: POLARSSL_MD5_C |
| * POLARSSL_SHA1_C |
| * |
| * Comment this macro to disable support for SSL 3.0 |
| */ |
| #define POLARSSL_SSL_PROTO_SSL3 |
| |
| /** |
| * \def POLARSSL_SSL_PROTO_TLS1 |
| * |
| * Enable support for TLS 1.0. |
| * |
| * Requires: POLARSSL_MD5_C |
| * POLARSSL_SHA1_C |
| * |
| * Comment this macro to disable support for TLS 1.0 |
| */ |
| #define POLARSSL_SSL_PROTO_TLS1 |
| |
| /** |
| * \def POLARSSL_SSL_PROTO_TLS1_1 |
| * |
| * Enable support for TLS 1.1 (and DTLS 1.0 if DTLS is enabled). |
| * |
| * Requires: POLARSSL_MD5_C |
| * POLARSSL_SHA1_C |
| * |
| * Comment this macro to disable support for TLS 1.1 / DTLS 1.0 |
| */ |
| #define POLARSSL_SSL_PROTO_TLS1_1 |
| |
| /** |
| * \def POLARSSL_SSL_PROTO_TLS1_2 |
| * |
| * Enable support for TLS 1.2 (and DTLS 1.2 if DTLS is enabled). |
| * |
| * Requires: POLARSSL_SHA1_C or POLARSSL_SHA256_C or POLARSSL_SHA512_C |
| * (Depends on ciphersuites) |
| * |
| * Comment this macro to disable support for TLS 1.2 / DTLS 1.2 |
| */ |
| #define POLARSSL_SSL_PROTO_TLS1_2 |
| |
| /** |
| * \def POLARSSL_SSL_PROTO_DTLS |
| * |
| * Enable support for DTLS (all available versions). |
| * |
| * Enable this and POLARSSL_SSL_PROTO_TLS1_1 to enable DTLS 1.0, |
| * and/or this and POLARSSL_SSL_PROTO_TLS1_2 to enable DTLS 1.2. |
| * |
| * Requires: POLARSSL_SSL_PROTO_TLS1_1 |
| * or POLARSSL_SSL_PROTO_TLS1_2 |
| * |
| * Comment this macro to disable support for DTLS |
| */ |
| #define POLARSSL_SSL_PROTO_DTLS |
| |
| /** |
| * \def POLARSSL_SSL_ALPN |
| * |
| * Enable support for Application Layer Protocol Negotiation. |
| * draft-ietf-tls-applayerprotoneg-05 |
| * |
| * Comment this macro to disable support for ALPN. |
| */ |
| #define POLARSSL_SSL_ALPN |
| |
| /** |
| * \def POLARSSL_SSL_SESSION_TICKETS |
| * |
| * Enable support for RFC 5077 session tickets in SSL. |
| * |
| * Requires: POLARSSL_AES_C |
| * POLARSSL_SHA256_C |
| * POLARSSL_CIPHER_MODE_CBC |
| * |
| * Comment this macro to disable support for SSL session tickets |
| */ |
| #define POLARSSL_SSL_SESSION_TICKETS |
| |
| /** |
| * \def POLARSSL_SSL_SERVER_NAME_INDICATION |
| * |
| * Enable support for RFC 6066 server name indication (SNI) in SSL. |
| * |
| * Comment this macro to disable support for server name indication in SSL |
| */ |
| #define POLARSSL_SSL_SERVER_NAME_INDICATION |
| |
| /** |
| * \def POLARSSL_SSL_TRUNCATED_HMAC |
| * |
| * Enable support for RFC 6066 truncated HMAC in SSL. |
| * |
| * Comment this macro to disable support for truncated HMAC in SSL |
| */ |
| #define POLARSSL_SSL_TRUNCATED_HMAC |
| |
| /** |
| * \def POLARSSL_SSL_SET_CURVES |
| * |
| * Enable ssl_set_curves(). |
| * |
| * This is disabled by default since it breaks binary compatibility with the |
| * 1.3.x line. If you choose to enable it, you will need to rebuild your |
| * application against the new header files, relinking will not be enough. |
| * It will be enabled by default, or no longer an option, in the 1.4 branch. |
| * |
| * Uncomment to make ssl_set_curves() available. |
| */ |
| //#define POLARSSL_SSL_SET_CURVES |
| |
| /** |
| * \def POLARSSL_THREADING_ALT |
| * |
| * Provide your own alternate threading implementation. |
| * |
| * Requires: POLARSSL_THREADING_C |
| * |
| * Uncomment this to allow your own alternate threading implementation. |
| */ |
| //#define POLARSSL_THREADING_ALT |
| |
| /** |
| * \def POLARSSL_THREADING_PTHREAD |
| * |
| * Enable the pthread wrapper layer for the threading layer. |
| * |
| * Requires: POLARSSL_THREADING_C |
| * |
| * Uncomment this to enable pthread mutexes. |
| */ |
| //#define POLARSSL_THREADING_PTHREAD |
| |
| /** |
| * \def POLARSSL_VERSION_FEATURES |
| * |
| * Allow run-time checking of compile-time enabled features. Thus allowing users |
| * to check at run-time if the library is for instance compiled with threading |
| * support via version_check_feature(). |
| * |
| * Requires: POLARSSL_VERSION_C |
| * |
| * Comment this to disable run-time checking and save ROM space |
| */ |
| #define POLARSSL_VERSION_FEATURES |
| |
| /** |
| * \def POLARSSL_X509_ALLOW_EXTENSIONS_NON_V3 |
| * |
| * If set, the X509 parser will not break-off when parsing an X509 certificate |
| * and encountering an extension in a v1 or v2 certificate. |
| * |
| * Uncomment to prevent an error. |
| */ |
| //#define POLARSSL_X509_ALLOW_EXTENSIONS_NON_V3 |
| |
| /** |
| * \def POLARSSL_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION |
| * |
| * If set, the X509 parser will not break-off when parsing an X509 certificate |
| * and encountering an unknown critical extension. |
| * |
| * Uncomment to prevent an error. |
| */ |
| //#define POLARSSL_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION |
| |
| /** |
| * \def POLARSSL_X509_CHECK_KEY_USAGE |
| * |
| * Enable verification of the keyUsage extension (CA and leaf certificates). |
| * |
| * Disabling this avoids problems with mis-issued and/or misused |
| * (intermediate) CA and leaf certificates. |
| * |
| * \warning Depending on your PKI use, disabling this can be a security risk! |
| * |
| * Comment to skip keyUsage checking for both CA and leaf certificates. |
| */ |
| #define POLARSSL_X509_CHECK_KEY_USAGE |
| |
| /** |
| * \def POLARSSL_X509_CHECK_EXTENDED_KEY_USAGE |
| * |
| * Enable verification of the extendedKeyUsage extension (leaf certificates). |
| * |
| * Disabling this avoids problems with mis-issued and/or misused certificates. |
| * |
| * \warning Depending on your PKI use, disabling this can be a security risk! |
| * |
| * Comment to skip extendedKeyUsage checking for certificates. |
| */ |
| #define POLARSSL_X509_CHECK_EXTENDED_KEY_USAGE |
| |
| /** |
| * \def POLARSSL_X509_RSASSA_PSS_SUPPORT |
| * |
| * Enable parsing and verification of X.509 certificates, CRLs and CSRS |
| * signed with RSASSA-PSS (aka PKCS#1 v2.1). |
| * |
| * Comment this macro to disallow using RSASSA-PSS in certificates. |
| */ |
| #define POLARSSL_X509_RSASSA_PSS_SUPPORT |
| |
| /** |
| * \def POLARSSL_ZLIB_SUPPORT |
| * |
| * If set, the SSL/TLS module uses ZLIB to support compression and |
| * decompression of packet data. |
| * |
| * \warning TLS-level compression MAY REDUCE SECURITY! See for example the |
| * CRIME attack. Before enabling this option, you should examine with care if |
| * CRIME or similar exploits may be a applicable to your use case. |
| * |
| * \note Currently compression can't bu used with DTLS. |
| * |
| * Used in: library/ssl_tls.c |
| * library/ssl_cli.c |
| * library/ssl_srv.c |
| * |
| * This feature requires zlib library and headers to be present. |
| * |
| * Uncomment to enable use of ZLIB |
| */ |
| //#define POLARSSL_ZLIB_SUPPORT |
| /* \} name SECTION: PolarSSL feature support */ |
| |
| /** |
| * \name SECTION: PolarSSL modules |
| * |
| * This section enables or disables entire modules in PolarSSL |
| * \{ |
| */ |
| |
| /** |
| * \def POLARSSL_AESNI_C |
| * |
| * Enable AES-NI support on x86-64. |
| * |
| * Module: library/aesni.c |
| * Caller: library/aes.c |
| * |
| * Requires: POLARSSL_HAVE_ASM |
| * |
| * This modules adds support for the AES-NI instructions on x86-64 |
| */ |
| #define POLARSSL_AESNI_C |
| |
| /** |
| * \def POLARSSL_AES_C |
| * |
| * Enable the AES block cipher. |
| * |
| * Module: library/aes.c |
| * Caller: library/ssl_tls.c |
| * library/pem.c |
| * library/ctr_drbg.c |
| * |
| * This module enables the following ciphersuites (if other requisites are |
| * enabled as well): |
| * TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA |
| * TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA |
| * TLS_ECDH_RSA_WITH_AES_128_CBC_SHA |
| * TLS_ECDH_RSA_WITH_AES_256_CBC_SHA |
| * TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256 |
| * TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384 |
| * TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256 |
| * TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384 |
| * TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256 |
| * TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384 |
| * TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256 |
| * TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384 |
| * TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 |
| * TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 |
| * TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 |
| * TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384 |
| * TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384 |
| * TLS_DHE_RSA_WITH_AES_256_CBC_SHA256 |
| * TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA |
| * TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA |
| * TLS_DHE_RSA_WITH_AES_256_CBC_SHA |
| * TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 |
| * TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 |
| * TLS_DHE_RSA_WITH_AES_128_GCM_SHA256 |
| * TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 |
| * TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 |
| * TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 |
| * TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA |
| * TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA |
| * TLS_DHE_RSA_WITH_AES_128_CBC_SHA |
| * TLS_DHE_PSK_WITH_AES_256_GCM_SHA384 |
| * TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384 |
| * TLS_DHE_PSK_WITH_AES_256_CBC_SHA384 |
| * TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA |
| * TLS_DHE_PSK_WITH_AES_256_CBC_SHA |
| * TLS_DHE_PSK_WITH_AES_128_GCM_SHA256 |
| * TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256 |
| * TLS_DHE_PSK_WITH_AES_128_CBC_SHA256 |
| * TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA |
| * TLS_DHE_PSK_WITH_AES_128_CBC_SHA |
| * TLS_RSA_WITH_AES_256_GCM_SHA384 |
| * TLS_RSA_WITH_AES_256_CBC_SHA256 |
| * TLS_RSA_WITH_AES_256_CBC_SHA |
| * TLS_RSA_WITH_AES_128_GCM_SHA256 |
| * TLS_RSA_WITH_AES_128_CBC_SHA256 |
| * TLS_RSA_WITH_AES_128_CBC_SHA |
| * TLS_RSA_PSK_WITH_AES_256_GCM_SHA384 |
| * TLS_RSA_PSK_WITH_AES_256_CBC_SHA384 |
| * TLS_RSA_PSK_WITH_AES_256_CBC_SHA |
| * TLS_RSA_PSK_WITH_AES_128_GCM_SHA256 |
| * TLS_RSA_PSK_WITH_AES_128_CBC_SHA256 |
| * TLS_RSA_PSK_WITH_AES_128_CBC_SHA |
| * TLS_PSK_WITH_AES_256_GCM_SHA384 |
| * TLS_PSK_WITH_AES_256_CBC_SHA384 |
| * TLS_PSK_WITH_AES_256_CBC_SHA |
| * TLS_PSK_WITH_AES_128_GCM_SHA256 |
| * TLS_PSK_WITH_AES_128_CBC_SHA256 |
| * TLS_PSK_WITH_AES_128_CBC_SHA |
| * |
| * PEM_PARSE uses AES for decrypting encrypted keys. |
| */ |
| #define POLARSSL_AES_C |
| |
| /** |
| * \def POLARSSL_ARC4_C |
| * |
| * Enable the ARCFOUR stream cipher. |
| * |
| * Module: library/arc4.c |
| * Caller: library/ssl_tls.c |
| * |
| * This module enables the following ciphersuites (if other requisites are |
| * enabled as well): |
| * TLS_ECDH_ECDSA_WITH_RC4_128_SHA |
| * TLS_ECDH_RSA_WITH_RC4_128_SHA |
| * TLS_ECDHE_ECDSA_WITH_RC4_128_SHA |
| * TLS_ECDHE_RSA_WITH_RC4_128_SHA |
| * TLS_ECDHE_PSK_WITH_RC4_128_SHA |
| * TLS_DHE_PSK_WITH_RC4_128_SHA |
| * TLS_RSA_WITH_RC4_128_SHA |
| * TLS_RSA_WITH_RC4_128_MD5 |
| * TLS_RSA_PSK_WITH_RC4_128_SHA |
| * TLS_PSK_WITH_RC4_128_SHA |
| */ |
| #define POLARSSL_ARC4_C |
| |
| /** |
| * \def POLARSSL_ASN1_PARSE_C |
| * |
| * Enable the generic ASN1 parser. |
| * |
| * Module: library/asn1.c |
| * Caller: library/x509.c |
| * library/dhm.c |
| * library/pkcs12.c |
| * library/pkcs5.c |
| * library/pkparse.c |
| */ |
| #define POLARSSL_ASN1_PARSE_C |
| |
| /** |
| * \def POLARSSL_ASN1_WRITE_C |
| * |
| * Enable the generic ASN1 writer. |
| * |
| * Module: library/asn1write.c |
| * Caller: library/ecdsa.c |
| * library/pkwrite.c |
| * library/x509_create.c |
| * library/x509write_crt.c |
| * library/x509write_csr.c |
| */ |
| #define POLARSSL_ASN1_WRITE_C |
| |
| /** |
| * \def POLARSSL_BASE64_C |
| * |
| * Enable the Base64 module. |
| * |
| * Module: library/base64.c |
| * Caller: library/pem.c |
| * |
| * This module is required for PEM support (required by X.509). |
| */ |
| #define POLARSSL_BASE64_C |
| |
| /** |
| * \def POLARSSL_BIGNUM_C |
| * |
| * Enable the multi-precision integer library. |
| * |
| * Module: library/bignum.c |
| * Caller: library/dhm.c |
| * library/ecp.c |
| * library/ecdsa.c |
| * library/rsa.c |
| * library/ssl_tls.c |
| * |
| * This module is required for RSA, DHM and ECC (ECDH, ECDSA) support. |
| */ |
| #define POLARSSL_BIGNUM_C |
| |
| /** |
| * \def POLARSSL_BLOWFISH_C |
| * |
| * Enable the Blowfish block cipher. |
| * |
| * Module: library/blowfish.c |
| */ |
| #define POLARSSL_BLOWFISH_C |
| |
| /** |
| * \def POLARSSL_CAMELLIA_C |
| * |
| * Enable the Camellia block cipher. |
| * |
| * Module: library/camellia.c |
| * Caller: library/ssl_tls.c |
| * |
| * This module enables the following ciphersuites (if other requisites are |
| * enabled as well): |
| * TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 |
| * TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 |
| * TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256 |
| * TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384 |
| * TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 |
| * TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 |
| * TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256 |
| * TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384 |
| * TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 |
| * TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 |
| * TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 |
| * TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 |
| * TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384 |
| * TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256 |
| * TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA |
| * TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 |
| * TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 |
| * TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 |
| * TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 |
| * TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 |
| * TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 |
| * TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA |
| * TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384 |
| * TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 |
| * TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 |
| * TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256 |
| * TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 |
| * TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 |
| * TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384 |
| * TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256 |
| * TLS_RSA_WITH_CAMELLIA_256_CBC_SHA |
| * TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256 |
| * TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256 |
| * TLS_RSA_WITH_CAMELLIA_128_CBC_SHA |
| * TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384 |
| * TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384 |
| * TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256 |
| * TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256 |
| * TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384 |
| * TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384 |
| * TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256 |
| * TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256 |
| */ |
| #define POLARSSL_CAMELLIA_C |
| |
| /** |
| * \def POLARSSL_CCM_C |
| * |
| * Enable the Counter with CBC-MAC (CCM) mode for 128-bit block cipher. |
| * |
| * Module: library/ccm.c |
| * |
| * Requires: POLARSSL_AES_C or POLARSSL_CAMELLIA_C |
| * |
| * This module enables the AES-CCM ciphersuites, if other requisites are |
| * enabled as well. |
| */ |
| #define POLARSSL_CCM_C |
| |
| /** |
| * \def POLARSSL_CERTS_C |
| * |
| * Enable the test certificates. |
| * |
| * Module: library/certs.c |
| * Caller: |
| * |
| * Requires: POLARSSL_PEM_PARSE_C |
| * |
| * This module is used for testing (ssl_client/server). |
| */ |
| #define POLARSSL_CERTS_C |
| |
| /** |
| * \def POLARSSL_CIPHER_C |
| * |
| * Enable the generic cipher layer. |
| * |
| * Module: library/cipher.c |
| * Caller: library/ssl_tls.c |
| * |
| * Uncomment to enable generic cipher wrappers. |
| */ |
| #define POLARSSL_CIPHER_C |
| |
| /** |
| * \def POLARSSL_CTR_DRBG_C |
| * |
| * Enable the CTR_DRBG AES-256-based random generator. |
| * |
| * Module: library/ctr_drbg.c |
| * Caller: |
| * |
| * Requires: POLARSSL_AES_C |
| * |
| * This module provides the CTR_DRBG AES-256 random number generator. |
| */ |
| #define POLARSSL_CTR_DRBG_C |
| |
| /** |
| * \def POLARSSL_DEBUG_C |
| * |
| * Enable the debug functions. |
| * |
| * Module: library/debug.c |
| * Caller: library/ssl_cli.c |
| * library/ssl_srv.c |
| * library/ssl_tls.c |
| * |
| * This module provides debugging functions. |
| */ |
| #define POLARSSL_DEBUG_C |
| |
| /** |
| * \def POLARSSL_DES_C |
| * |
| * Enable the DES block cipher. |
| * |
| * Module: library/des.c |
| * Caller: library/pem.c |
| * library/ssl_tls.c |
| * |
| * This module enables the following ciphersuites (if other requisites are |
| * enabled as well): |
| * TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA |
| * TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA |
| * TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA |
| * TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA |
| * TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA |
| * TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA |
| * TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA |
| * TLS_RSA_WITH_3DES_EDE_CBC_SHA |
| * TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA |
| * TLS_PSK_WITH_3DES_EDE_CBC_SHA |
| * |
| * PEM_PARSE uses DES/3DES for decrypting encrypted keys. |
| */ |
| #define POLARSSL_DES_C |
| |
| /** |
| * \def POLARSSL_DHM_C |
| * |
| * Enable the Diffie-Hellman-Merkle module. |
| * |
| * Module: library/dhm.c |
| * Caller: library/ssl_cli.c |
| * library/ssl_srv.c |
| * |
| * This module is used by the following key exchanges: |
| * DHE-RSA, DHE-PSK |
| */ |
| #define POLARSSL_DHM_C |
| |
| /** |
| * \def POLARSSL_ECDH_C |
| * |
| * Enable the elliptic curve Diffie-Hellman library. |
| * |
| * Module: library/ecdh.c |
| * Caller: library/ssl_cli.c |
| * library/ssl_srv.c |
| * |
| * This module is used by the following key exchanges: |
| * ECDHE-ECDSA, ECDHE-RSA, DHE-PSK |
| * |
| * Requires: POLARSSL_ECP_C |
| */ |
| #define POLARSSL_ECDH_C |
| |
| /** |
| * \def POLARSSL_ECDSA_C |
| * |
| * Enable the elliptic curve DSA library. |
| * |
| * Module: library/ecdsa.c |
| * Caller: |
| * |
| * This module is used by the following key exchanges: |
| * ECDHE-ECDSA |
| * |
| * Requires: POLARSSL_ECP_C, POLARSSL_ASN1_WRITE_C, POLARSSL_ASN1_PARSE_C |
| */ |
| #define POLARSSL_ECDSA_C |
| |
| /** |
| * \def POLARSSL_ECP_C |
| * |
| * Enable the elliptic curve over GF(p) library. |
| * |
| * Module: library/ecp.c |
| * Caller: library/ecdh.c |
| * library/ecdsa.c |
| * |
| * Requires: POLARSSL_BIGNUM_C and at least one POLARSSL_ECP_DP_XXX_ENABLED |
| */ |
| #define POLARSSL_ECP_C |
| |
| /** |
| * \def POLARSSL_ENTROPY_C |
| * |
| * Enable the platform-specific entropy code. |
| * |
| * Module: library/entropy.c |
| * Caller: |
| * |
| * Requires: POLARSSL_SHA512_C or POLARSSL_SHA256_C |
| * |
| * This module provides a generic entropy pool |
| */ |
| #define POLARSSL_ENTROPY_C |
| |
| /** |
| * \def POLARSSL_ERROR_C |
| * |
| * Enable error code to error string conversion. |
| * |
| * Module: library/error.c |
| * Caller: |
| * |
| * This module enables polarssl_strerror(). |
| */ |
| #define POLARSSL_ERROR_C |
| |
| /** |
| * \def POLARSSL_GCM_C |
| * |
| * Enable the Galois/Counter Mode (GCM) for AES. |
| * |
| * Module: library/gcm.c |
| * |
| * Requires: POLARSSL_AES_C or POLARSSL_CAMELLIA_C |
| * |
| * This module enables the AES-GCM and CAMELLIA-GCM ciphersuites, if other |
| * requisites are enabled as well. |
| */ |
| #define POLARSSL_GCM_C |
| |
| /** |
| * \def POLARSSL_HAVEGE_C |
| * |
| * Enable the HAVEGE random generator. |
| * |
| * Warning: the HAVEGE random generator is not suitable for virtualized |
| * environments |
| * |
| * Warning: the HAVEGE random generator is dependent on timing and specific |
| * processor traits. It is therefore not advised to use HAVEGE as |
| * your applications primary random generator or primary entropy pool |
| * input. As a secondary input to your entropy pool, it IS able add |
| * the (limited) extra entropy it provides. |
| * |
| * Module: library/havege.c |
| * Caller: |
| * |
| * Requires: POLARSSL_TIMING_C |
| * |
| * Uncomment to enable the HAVEGE random generator. |
| */ |
| //#define POLARSSL_HAVEGE_C |
| |
| /** |
| * \def POLARSSL_HMAC_DRBG_C |
| * |
| * Enable the HMAC_DRBG random generator. |
| * |
| * Module: library/hmac_drbg.c |
| * Caller: |
| * |
| * Requires: POLARSSL_MD_C |
| * |
| * Uncomment to enable the HMAC_DRBG random number geerator. |
| */ |
| #define POLARSSL_HMAC_DRBG_C |
| |
| /** |
| * \def POLARSSL_MD_C |
| * |
| * Enable the generic message digest layer. |
| * |
| * Module: library/md.c |
| * Caller: |
| * |
| * Uncomment to enable generic message digest wrappers. |
| */ |
| #define POLARSSL_MD_C |
| |
| /** |
| * \def POLARSSL_MD2_C |
| * |
| * Enable the MD2 hash algorithm. |
| * |
| * Module: library/md2.c |
| * Caller: |
| * |
| * Uncomment to enable support for (rare) MD2-signed X.509 certs. |
| */ |
| //#define POLARSSL_MD2_C |
| |
| /** |
| * \def POLARSSL_MD4_C |
| * |
| * Enable the MD4 hash algorithm. |
| * |
| * Module: library/md4.c |
| * Caller: |
| * |
| * Uncomment to enable support for (rare) MD4-signed X.509 certs. |
| */ |
| //#define POLARSSL_MD4_C |
| |
| /** |
| * \def POLARSSL_MD5_C |
| * |
| * Enable the MD5 hash algorithm. |
| * |
| * Module: library/md5.c |
| * Caller: library/md.c |
| * library/pem.c |
| * library/ssl_tls.c |
| * |
| * This module is required for SSL/TLS and X.509. |
| * PEM_PARSE uses MD5 for decrypting encrypted keys. |
| */ |
| #define POLARSSL_MD5_C |
| |
| /** |
| * \def POLARSSL_MEMORY_C |
| * Deprecated since 1.3.5. Please use POLARSSL_PLATFORM_MEMORY instead. |
| */ |
| //#define POLARSSL_MEMORY_C |
| |
| /** |
| * \def POLARSSL_MEMORY_BUFFER_ALLOC_C |
| * |
| * Enable the buffer allocator implementation that makes use of a (stack) |
| * based buffer to 'allocate' dynamic memory. (replaces malloc() and free() |
| * calls) |
| * |
| * Module: library/memory_buffer_alloc.c |
| * |
| * Requires: POLARSSL_PLATFORM_C |
| * POLARSSL_PLATFORM_MEMORY (to use it within PolarSSL) |
| * |
| * Enable this module to enable the buffer memory allocator. |
| */ |
| //#define POLARSSL_MEMORY_BUFFER_ALLOC_C |
| |
| /** |
| * \def POLARSSL_NET_C |
| * |
| * Enable the TCP/IP networking routines. |
| * |
| * Module: library/net.c |
| * |
| * This module provides TCP/IP networking routines. |
| */ |
| #define POLARSSL_NET_C |
| |
| /** |
| * \def POLARSSL_OID_C |
| * |
| * Enable the OID database. |
| * |
| * Module: library/oid.c |
| * Caller: library/asn1write.c |
| * library/pkcs5.c |
| * library/pkparse.c |
| * library/pkwrite.c |
| * library/rsa.c |
| * library/x509.c |
| * library/x509_create.c |
| * library/x509_crl.c |
| * library/x509_crt.c |
| * library/x509_csr.c |
| * library/x509write_crt.c |
| * library/x509write_csr.c |
| * |
| * This modules translates between OIDs and internal values. |
| */ |
| #define POLARSSL_OID_C |
| |
| /** |
| * \def POLARSSL_PADLOCK_C |
| * |
| * Enable VIA Padlock support on x86. |
| * |
| * Module: library/padlock.c |
| * Caller: library/aes.c |
| * |
| * Requires: POLARSSL_HAVE_ASM |
| * |
| * This modules adds support for the VIA PadLock on x86. |
| */ |
| #define POLARSSL_PADLOCK_C |
| |
| /** |
| * \def POLARSSL_PBKDF2_C |
| * |
| * Enable PKCS#5 PBKDF2 key derivation function. |
| * DEPRECATED: Use POLARSSL_PKCS5_C instead |
| * |
| * Module: library/pbkdf2.c |
| * |
| * Requires: POLARSSL_PKCS5_C |
| * |
| * This module adds support for the PKCS#5 PBKDF2 key derivation function. |
| */ |
| #define POLARSSL_PBKDF2_C |
| |
| /** |
| * \def POLARSSL_PEM_PARSE_C |
| * |
| * Enable PEM decoding / parsing. |
| * |
| * Module: library/pem.c |
| * Caller: library/dhm.c |
| * library/pkparse.c |
| * library/x509_crl.c |
| * library/x509_crt.c |
| * library/x509_csr.c |
| * |
| * Requires: POLARSSL_BASE64_C |
| * |
| * This modules adds support for decoding / parsing PEM files. |
| */ |
| #define POLARSSL_PEM_PARSE_C |
| |
| /** |
| * \def POLARSSL_PEM_WRITE_C |
| * |
| * Enable PEM encoding / writing. |
| * |
| * Module: library/pem.c |
| * Caller: library/pkwrite.c |
| * library/x509write_crt.c |
| * library/x509write_csr.c |
| * |
| * Requires: POLARSSL_BASE64_C |
| * |
| * This modules adds support for encoding / writing PEM files. |
| */ |
| #define POLARSSL_PEM_WRITE_C |
| |
| /** |
| * \def POLARSSL_PK_C |
| * |
| * Enable the generic public (asymetric) key layer. |
| * |
| * Module: library/pk.c |
| * Caller: library/ssl_tls.c |
| * library/ssl_cli.c |
| * library/ssl_srv.c |
| * |
| * Requires: POLARSSL_RSA_C or POLARSSL_ECP_C |
| * |
| * Uncomment to enable generic public key wrappers. |
| */ |
| #define POLARSSL_PK_C |
| |
| /** |
| * \def POLARSSL_PK_PARSE_C |
| * |
| * Enable the generic public (asymetric) key parser. |
| * |
| * Module: library/pkparse.c |
| * Caller: library/x509_crt.c |
| * library/x509_csr.c |
| * |
| * Requires: POLARSSL_PK_C |
| * |
| * Uncomment to enable generic public key parse functions. |
| */ |
| #define POLARSSL_PK_PARSE_C |
| |
| /** |
| * \def POLARSSL_PK_WRITE_C |
| * |
| * Enable the generic public (asymetric) key writer. |
| * |
| * Module: library/pkwrite.c |
| * Caller: library/x509write.c |
| * |
| * Requires: POLARSSL_PK_C |
| * |
| * Uncomment to enable generic public key write functions. |
| */ |
| #define POLARSSL_PK_WRITE_C |
| |
| /** |
| * \def POLARSSL_PKCS5_C |
| * |
| * Enable PKCS#5 functions. |
| * |
| * Module: library/pkcs5.c |
| * |
| * Requires: POLARSSL_MD_C |
| * |
| * This module adds support for the PKCS#5 functions. |
| */ |
| #define POLARSSL_PKCS5_C |
| |
| /** |
| * \def POLARSSL_PKCS11_C |
| * |
| * Enable wrapper for PKCS#11 smartcard support. |
| * |
| * Module: library/pkcs11.c |
| * Caller: library/pk.c |
| * |
| * Requires: POLARSSL_PK_C |
| * |
| * This module enables SSL/TLS PKCS #11 smartcard support. |
| * Requires the presence of the PKCS#11 helper library (libpkcs11-helper) |
| */ |
| //#define POLARSSL_PKCS11_C |
| |
| /** |
| * \def POLARSSL_PKCS12_C |
| * |
| * Enable PKCS#12 PBE functions. |
| * Adds algorithms for parsing PKCS#8 encrypted private keys |
| * |
| * Module: library/pkcs12.c |
| * Caller: library/pkparse.c |
| * |
| * Requires: POLARSSL_ASN1_PARSE_C, POLARSSL_CIPHER_C, POLARSSL_MD_C |
| * Can use: POLARSSL_ARC4_C |
| * |
| * This module enables PKCS#12 functions. |
| */ |
| #define POLARSSL_PKCS12_C |
| |
| /** |
| * \def POLARSSL_PLATFORM_C |
| * |
| * Enable the platform abstraction layer that allows you to re-assign |
| * functions like malloc(), free(), printf(), fprintf() |
| * |
| * Module: library/platform.c |
| * Caller: Most other .c files |
| * |
| * This module enables abstraction of common (libc) functions. |
| */ |
| #define POLARSSL_PLATFORM_C |
| |
| /** |
| * \def POLARSSL_RIPEMD160_C |
| * |
| * Enable the RIPEMD-160 hash algorithm. |
| * |
| * Module: library/ripemd160.c |
| * Caller: library/md.c |
| * |
| */ |
| #define POLARSSL_RIPEMD160_C |
| |
| /** |
| * \def POLARSSL_RSA_C |
| * |
| * Enable the RSA public-key cryptosystem. |
| * |
| * Module: library/rsa.c |
| * Caller: library/ssl_cli.c |
| * library/ssl_srv.c |
| * library/ssl_tls.c |
| * library/x509.c |
| * |
| * This module is used by the following key exchanges: |
| * RSA, DHE-RSA, ECDHE-RSA, RSA-PSK |
| * |
| * Requires: POLARSSL_BIGNUM_C, POLARSSL_OID_C |
| */ |
| #define POLARSSL_RSA_C |
| |
| /** |
| * \def POLARSSL_SHA1_C |
| * |
| * Enable the SHA1 cryptographic hash algorithm. |
| * |
| * Module: library/sha1.c |
| * Caller: library/md.c |
| * library/ssl_cli.c |
| * library/ssl_srv.c |
| * library/ssl_tls.c |
| * library/x509write_crt.c |
| * |
| * This module is required for SSL/TLS and SHA1-signed certificates. |
| */ |
| #define POLARSSL_SHA1_C |
| |
| /** |
| * \def POLARSSL_SHA256_C |
| * |
| * Enable the SHA-224 and SHA-256 cryptographic hash algorithms. |
| * (Used to be POLARSSL_SHA2_C) |
| * |
| * Module: library/sha256.c |
| * Caller: library/entropy.c |
| * library/md.c |
| * library/ssl_cli.c |
| * library/ssl_srv.c |
| * library/ssl_tls.c |
| * |
| * This module adds support for SHA-224 and SHA-256. |
| * This module is required for the SSL/TLS 1.2 PRF function. |
| */ |
| #define POLARSSL_SHA256_C |
| |
| /** |
| * \def POLARSSL_SHA512_C |
| * |
| * Enable the SHA-384 and SHA-512 cryptographic hash algorithms. |
| * (Used to be POLARSSL_SHA4_C) |
| * |
| * Module: library/sha512.c |
| * Caller: library/entropy.c |
| * library/md.c |
| * library/ssl_cli.c |
| * library/ssl_srv.c |
| * |
| * This module adds support for SHA-384 and SHA-512. |
| */ |
| #define POLARSSL_SHA512_C |
| |
| /** |
| * \def POLARSSL_SSL_CACHE_C |
| * |
| * Enable simple SSL cache implementation. |
| * |
| * Module: library/ssl_cache.c |
| * Caller: |
| * |
| * Requires: POLARSSL_SSL_CACHE_C |
| */ |
| #define POLARSSL_SSL_CACHE_C |
| |
| /** |
| * \def POLARSSL_SSL_CLI_C |
| * |
| * Enable the SSL/TLS client code. |
| * |
| * Module: library/ssl_cli.c |
| * Caller: |
| * |
| * Requires: POLARSSL_SSL_TLS_C |
| * |
| * This module is required for SSL/TLS client support. |
| */ |
| #define POLARSSL_SSL_CLI_C |
| |
| /** |
| * \def POLARSSL_SSL_SRV_C |
| * |
| * Enable the SSL/TLS server code. |
| * |
| * Module: library/ssl_srv.c |
| * Caller: |
| * |
| * Requires: POLARSSL_SSL_TLS_C |
| * |
| * This module is required for SSL/TLS server support. |
| */ |
| #define POLARSSL_SSL_SRV_C |
| |
| /** |
| * \def POLARSSL_SSL_TLS_C |
| * |
| * Enable the generic SSL/TLS code. |
| * |
| * Module: library/ssl_tls.c |
| * Caller: library/ssl_cli.c |
| * library/ssl_srv.c |
| * |
| * Requires: POLARSSL_CIPHER_C, POLARSSL_MD_C |
| * and at least one of the POLARSSL_SSL_PROTO_* defines |
| * |
| * This module is required for SSL/TLS. |
| */ |
| #define POLARSSL_SSL_TLS_C |
| |
| /** |
| * \def POLARSSL_THREADING_C |
| * |
| * Enable the threading abstraction layer. |
| * By default PolarSSL assumes it is used in a non-threaded environment or that |
| * contexts are not shared between threads. If you do intend to use contexts |
| * between threads, you will need to enable this layer to prevent race |
| * conditions. |
| * |
| * Module: library/threading.c |
| * |
| * This allows different threading implementations (self-implemented or |
| * provided). |
| * |
| * You will have to enable either POLARSSL_THREADING_ALT or |
| * POLARSSL_THREADING_PTHREAD. |
| * |
| * Enable this layer to allow use of mutexes within PolarSSL |
| */ |
| //#define POLARSSL_THREADING_C |
| |
| /** |
| * \def POLARSSL_TIMING_C |
| * |
| * Enable the portable timing interface. |
| * |
| * Module: library/timing.c |
| * Caller: library/havege.c |
| * |
| * This module is used by the HAVEGE random number generator. |
| */ |
| #define POLARSSL_TIMING_C |
| |
| /** |
| * \def POLARSSL_VERSION_C |
| * |
| * Enable run-time version information. |
| * |
| * Module: library/version.c |
| * |
| * This module provides run-time version information. |
| */ |
| #define POLARSSL_VERSION_C |
| |
| /** |
| * \def POLARSSL_X509_USE_C |
| * |
| * Enable X.509 core for using certificates. |
| * |
| * Module: library/x509.c |
| * Caller: library/x509_crl.c |
| * library/x509_crt.c |
| * library/x509_csr.c |
| * |
| * Requires: POLARSSL_ASN1_PARSE_C, POLARSSL_BIGNUM_C, POLARSSL_OID_C, |
| * POLARSSL_PK_PARSE_C |
| * |
| * This module is required for the X.509 parsing modules. |
| */ |
| #define POLARSSL_X509_USE_C |
| |
| /** |
| * \def POLARSSL_X509_CRT_PARSE_C |
| * |
| * Enable X.509 certificate parsing. |
| * |
| * Module: library/x509_crt.c |
| * Caller: library/ssl_cli.c |
| * library/ssl_srv.c |
| * library/ssl_tls.c |
| * |
| * Requires: POLARSSL_X509_USE_C |
| * |
| * This module is required for X.509 certificate parsing. |
| */ |
| #define POLARSSL_X509_CRT_PARSE_C |
| |
| /** |
| * \def POLARSSL_X509_CRL_PARSE_C |
| * |
| * Enable X.509 CRL parsing. |
| * |
| * Module: library/x509_crl.c |
| * Caller: library/x509_crt.c |
| * |
| * Requires: POLARSSL_X509_USE_C |
| * |
| * This module is required for X.509 CRL parsing. |
| */ |
| #define POLARSSL_X509_CRL_PARSE_C |
| |
| /** |
| * \def POLARSSL_X509_CSR_PARSE_C |
| * |
| * Enable X.509 Certificate Signing Request (CSR) parsing. |
| * |
| * Module: library/x509_csr.c |
| * Caller: library/x509_crt_write.c |
| * |
| * Requires: POLARSSL_X509_USE_C |
| * |
| * This module is used for reading X.509 certificate request. |
| */ |
| #define POLARSSL_X509_CSR_PARSE_C |
| |
| /** |
| * \def POLARSSL_X509_CREATE_C |
| * |
| * Enable X.509 core for creating certificates. |
| * |
| * Module: library/x509_create.c |
| * |
| * Requires: POLARSSL_BIGNUM_C, POLARSSL_OID_C, POLARSSL_PK_WRITE_C |
| * |
| * This module is the basis for creating X.509 certificates and CSRs. |
| */ |
| #define POLARSSL_X509_CREATE_C |
| |
| /** |
| * \def POLARSSL_X509_CRT_WRITE_C |
| * |
| * Enable creating X.509 certificates. |
| * |
| * Module: library/x509_crt_write.c |
| * |
| * Requires: POLARSSL_CREATE_C |
| * |
| * This module is required for X.509 certificate creation. |
| */ |
| #define POLARSSL_X509_CRT_WRITE_C |
| |
| /** |
| * \def POLARSSL_X509_CSR_WRITE_C |
| * |
| * Enable creating X.509 Certificate Signing Requests (CSR). |
| * |
| * Module: library/x509_csr_write.c |
| * |
| * Requires: POLARSSL_CREATE_C |
| * |
| * This module is required for X.509 certificate request writing. |
| */ |
| #define POLARSSL_X509_CSR_WRITE_C |
| |
| /** |
| * \def POLARSSL_XTEA_C |
| * |
| * Enable the XTEA block cipher. |
| * |
| * Module: library/xtea.c |
| * Caller: |
| */ |
| #define POLARSSL_XTEA_C |
| |
| /* \} name SECTION: PolarSSL modules */ |
| |
| /** |
| * \name SECTION: Module configuration options |
| * |
| * This section allows for the setting of module specific sizes and |
| * configuration options. The default values are already present in the |
| * relevant header files and should suffice for the regular use cases. |
| * |
| * Our advice is to enable options and change their values here |
| * only if you have a good reason and know the consequences. |
| * |
| * Please check the respective header file for documentation on these |
| * parameters (to prevent duplicate documentation). |
| * \{ |
| */ |
| |
| /* MPI / BIGNUM options */ |
| //#define POLARSSL_MPI_WINDOW_SIZE 6 /**< Maximum windows size used. */ |
| //#define POLARSSL_MPI_MAX_SIZE 1024 /**< Maximum number of bytes for usable MPIs. */ |
| |
| /* CTR_DRBG options */ |
| //#define CTR_DRBG_ENTROPY_LEN 48 /**< Amount of entropy used per seed by default (48 with SHA-512, 32 with SHA-256) */ |
| //#define CTR_DRBG_RESEED_INTERVAL 10000 /**< Interval before reseed is performed by default */ |
| //#define CTR_DRBG_MAX_INPUT 256 /**< Maximum number of additional input bytes */ |
| //#define CTR_DRBG_MAX_REQUEST 1024 /**< Maximum number of requested bytes per call */ |
| //#define CTR_DRBG_MAX_SEED_INPUT 384 /**< Maximum size of (re)seed buffer */ |
| |
| /* HMAC_DRBG options */ |
| //#define POLARSSL_HMAC_DRBG_RESEED_INTERVAL 10000 /**< Interval before reseed is performed by default */ |
| //#define POLARSSL_HMAC_DRBG_MAX_INPUT 256 /**< Maximum number of additional input bytes */ |
| //#define POLARSSL_HMAC_DRBG_MAX_REQUEST 1024 /**< Maximum number of requested bytes per call */ |
| //#define POLARSSL_HMAC_DRBG_MAX_SEED_INPUT 384 /**< Maximum size of (re)seed buffer */ |
| |
| /* ECP options */ |
| //#define POLARSSL_ECP_MAX_BITS 521 /**< Maximum bit size of groups */ |
| //#define POLARSSL_ECP_WINDOW_SIZE 6 /**< Maximum window size used */ |
| //#define POLARSSL_ECP_FIXED_POINT_OPTIM 1 /**< Enable fixed-point speed-up */ |
| |
| /* Entropy options */ |
| //#define ENTROPY_MAX_SOURCES 20 /**< Maximum number of sources supported */ |
| //#define ENTROPY_MAX_GATHER 128 /**< Maximum amount requested from entropy sources */ |
| |
| /* Memory buffer allocator options */ |
| //#define POLARSSL_MEMORY_ALIGN_MULTIPLE 4 /**< Align on multiples of this value */ |
| |
| /* Platform options */ |
| //#define POLARSSL_PLATFORM_STD_MEM_HDR <stdlib.h> /**< Header to include if POLARSSL_PLATFORM_NO_STD_FUNCTIONS is defined. Don't define if no header is needed. */ |
| //#define POLARSSL_PLATFORM_STD_MALLOC malloc /**< Default allocator to use, can be undefined */ |
| //#define POLARSSL_PLATFORM_STD_FREE free /**< Default free to use, can be undefined */ |
| //#define POLARSSL_PLATFORM_STD_PRINTF printf /**< Default printf to use, can be undefined */ |
| //#define POLARSSL_PLATFORM_STD_FPRINTF fprintf /**< Default fprintf to use, can be undefined */ |
| |
| /* SSL Cache options */ |
| //#define SSL_CACHE_DEFAULT_TIMEOUT 86400 /**< 1 day */ |
| //#define SSL_CACHE_DEFAULT_MAX_ENTRIES 50 /**< Maximum entries in cache */ |
| |
| /* SSL options */ |
| //#define SSL_MAX_CONTENT_LEN 16384 /**< Size of the input / output buffer */ |
| //#define SSL_DEFAULT_TICKET_LIFETIME 86400 /**< Lifetime of session tickets (if enabled) */ |
| //#define POLARSSL_PSK_MAX_LEN 32 /**< Max size of TLS pre-shared keys, in bytes (default 256 bits) */ |
| |
| /** |
| * Complete list of ciphersuites to use, in order of preference. |
| * |
| * \warning No dependency checking is done on that field! This option can only |
| * be used to restrict the set of available ciphersuites. It is your |
| * responsibility to make sure the needed modules are active. |
| * |
| * Use this to save a few hundred bytes of ROM (default ordering of all |
| * available ciphersuites) and a few to a few hundred bytes of RAM. |
| * |
| * The value below is only an example, not the default. |
| */ |
| //#define SSL_CIPHERSUITES TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 |
| |
| /* Debug options */ |
| //#define POLARSSL_DEBUG_DFL_MODE POLARSSL_DEBUG_LOG_FULL /**< Default log: Full or Raw */ |
| |
| /* \} name SECTION: Module configuration options */ |
| |
| #include "check_config.h" |
| |
| #endif /* POLARSSL_CONFIG_H */ |