| PolarSSL ChangeLog |
| |
| = Development |
| Features |
| * Elliptic Curve Cryptography module added |
| * Elliptic Curve Diffie Hellman module added |
| * Ephemeral Elliptic Curve Diffie Hellman support for SSL/TLS |
| (ECDHE-based ciphersuites) |
| * Ability to specify allowed ciphersuites based on the protocol version. |
| * PSK and DHE-PSK based ciphersuites added |
| |
| Changes |
| * Introduced separate SSL Ciphersuites module that is based on |
| Cipher and MD information |
| * Internals for SSL module adapted to have separate IV pointer that is |
| dynamically set (Better support for hardware acceleration) |
| * Moved all OID functionality to a separate module. RSA function |
| prototypes for the RSA sign and verify functions changed as a result |
| |
| Bugfix |
| * Fix for MPI assembly for ARM |
| |
| = Version 1.2.6 released 2013-03-11 |
| Bugfix |
| * Fixed memory leak in ssl_free() and ssl_reset() for active session |
| * Corrected GCM counter incrementation to use only 32-bits instead of |
| 128-bits (found by Yawning Angel) |
| * Fixes for 64-bit compilation with MS Visual Studio |
| * Fixed net_bind() for specified IP addresses on little endian systems |
| * Fixed assembly code for ARM (Thumb and regular) for some compilers |
| |
| Changes |
| * Internally split up rsa_pkcs1_encrypt(), rsa_pkcs1_decrypt(), |
| rsa_pkcs1_sign() and rsa_pkcs1_verify() to separate PKCS#1 v1.5 and |
| PKCS#1 v2.1 functions |
| * Added support for custom labels when using rsa_rsaes_oaep_encrypt() |
| or rsa_rsaes_oaep_decrypt() |
| * Re-added handling for SSLv2 Client Hello when the define |
| POLARSSL_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO is set |
| * The SSL session cache module (ssl_cache) now also retains peer_cert |
| information (not the entire chain) |
| |
| Security |
| * Removed further timing differences during SSL message decryption in |
| ssl_decrypt_buf() |
| * Removed timing differences due to bad padding from |
| rsa_rsaes_pkcs1_v15_decrypt() and rsa_pkcs1_decrypt() for PKCS#1 v1.5 |
| operations |
| |
| = Version 1.2.5 released 2013-02-02 |
| Changes |
| * Allow enabling of dummy error_strerror() to support some use-cases |
| * Debug messages about padding errors during SSL message decryption are |
| disabled by default and can be enabled with POLARSSL_SSL_DEBUG_ALL |
| * Sending of security-relevant alert messages that do not break |
| interoperability can be switched on/off with the flag |
| POLARSSL_SSL_ALL_ALERT_MESSAGES |
| |
| Security |
| * Removed timing differences during SSL message decryption in |
| ssl_decrypt_buf() due to badly formatted padding |
| |
| = Version 1.2.4 released 2013-01-25 |
| Changes |
| * More advanced SSL ciphersuite representation and moved to more dynamic |
| SSL core |
| * Added ssl_handshake_step() to allow single stepping the handshake process |
| |
| Bugfix |
| * Memory leak when using RSA_PKCS_V21 operations fixed |
| * Handle future version properly in ssl_write_certificate_request() |
| * Correctly handle CertificateRequest message in client for <= TLS 1.1 |
| without DN list |
| |
| = Version 1.2.3 released 2012-11-26 |
| Bugfix |
| * Server not always sending correct CertificateRequest message |
| |
| = Version 1.2.2 released 2012-11-24 |
| Changes |
| * Added p_hw_data to ssl_context for context specific hardware acceleration |
| data |
| * During verify trust-CA is only checked for expiration and CRL presence |
| |
| Bugfixes |
| * Fixed client authentication compatibility |
| * Fixed dependency on POLARSSL_SHA4_C in SSL modules |
| |
| = Version 1.2.1 released 2012-11-20 |
| Changes |
| * Depth that the certificate verify callback receives is now numbered |
| bottom-up (Peer cert depth is 0) |
| |
| Bugfixes |
| * Fixes for MSVC6 |
| * Moved mpi_inv_mod() outside POLARSSL_GENPRIME |
| * Allow R and A to point to same mpi in mpi_div_mpi (found by Manuel |
| Pégourié-Gonnard) |
| * Fixed possible segfault in mpi_shift_r() (found by Manuel |
| Pégourié-Gonnard) |
| * Added max length check for rsa_pkcs1_sign with PKCS#1 v2.1 |
| |
| = Version 1.2.0 released 2012-10-31 |
| Features |
| * Added support for NULL cipher (POLARSSL_CIPHER_NULL_CIPHER) and weak |
| ciphersuites (POLARSSL_ENABLE_WEAK_CIPHERSUITES). They are disabled by |
| default! |
| * Added support for wildcard certificates |
| * Added support for multi-domain certificates through the X509 Subject |
| Alternative Name extension |
| * Added preliminary ASN.1 buffer writing support |
| * Added preliminary X509 Certificate Request writing support |
| * Added key_app_writer example application |
| * Added cert_req example application |
| * Added base Galois Counter Mode (GCM) for AES |
| * Added TLS 1.2 support (RFC 5246) |
| * Added GCM suites to TLS 1.2 (RFC 5288) |
| * Added commandline error code convertor (util/strerror) |
| * Added support for Hardware Acceleration hooking in SSL/TLS |
| * Added OpenSSL / PolarSSL compatibility script (tests/compat.sh) and |
| example application (programs/ssl/o_p_test) (requires OpenSSL) |
| * Added X509 CA Path support |
| * Added Thumb assembly optimizations |
| * Added DEFLATE compression support as per RFC3749 (requires zlib) |
| * Added blowfish algorithm (Generic and cipher layer) |
| * Added PKCS#5 PBKDF2 key derivation function |
| * Added Secure Renegotiation (RFC 5746) |
| * Added predefined DHM groups from RFC 5114 |
| * Added simple SSL session cache implementation |
| * Added ServerName extension parsing (SNI) at server side |
| * Added option to add minimum accepted SSL/TLS protocol version |
| |
| Changes |
| * Removed redundant POLARSSL_DEBUG_MSG define |
| * AES code only check for Padlock once |
| * Fixed const-correctness mpi_get_bit() |
| * Documentation for mpi_lsb() and mpi_msb() |
| * Moved out_msg to out_hdr + 32 to support hardware acceleration |
| * Changed certificate verify behaviour to comply with RFC 6125 section 6.3 |
| to not match CN if subjectAltName extension is present (Closes ticket #56) |
| * Cipher layer cipher_mode_t POLARSSL_MODE_CFB128 is renamed to |
| POLARSSL_MODE_CFB, to also handle different block size CFB modes. |
| * Removed handling for SSLv2 Client Hello (as per RFC 5246 recommendation) |
| * Revamped session resumption handling |
| * Generalized external private key implementation handling (like PKCS#11) |
| in SSL/TLS |
| * Revamped x509_verify() and the SSL f_vrfy callback implementations |
| * Moved from unsigned long to fixed width uint32_t types throughout code |
| * Renamed ciphersuites naming scheme to IANA reserved names |
| |
| Bugfix |
| * Fixed handling error in mpi_cmp_mpi() on longer B values (found by |
| Hui Dong) |
| * Fixed potential heap corruption in x509_name allocation |
| * Fixed single RSA test that failed on Big Endian systems (Closes ticket #54) |
| * mpi_exp_mod() now correctly handles negative base numbers (Closes ticket |
| #52) |
| * Handle encryption with private key and decryption with public key as per |
| RFC 2313 |
| * Handle empty certificate subject names |
| * Prevent reading over buffer boundaries on X509 certificate parsing |
| * mpi_add_abs() now correctly handles adding short numbers to long numbers |
| with carry rollover (found by Ruslan Yushchenko) |
| * Handle existence of OpenSSL Trust Extensions at end of X.509 DER blob |
| * Fixed MPI assembly for SPARC64 platform |
| |
| Security |
| * Fixed potential memory zeroization on miscrafted RSA key (found by Eloi |
| Vanderbeken) |
| |
| = Version 1.1.5 released on 2013-01-16 |
| Bugfix |
| * Fixed MPI assembly for SPARC64 platform |
| * Handle existence of OpenSSL Trust Extensions at end of X.509 DER blob |
| * mpi_add_abs() now correctly handles adding short numbers to long numbers |
| with carry rollover |
| * Moved mpi_inv_mod() outside POLARSSL_GENPRIME |
| * Prevent reading over buffer boundaries on X509 certificate parsing |
| * mpi_exp_mod() now correctly handles negative base numbers (Closes ticket |
| #52) |
| * Fixed possible segfault in mpi_shift_r() (found by Manuel |
| Pégourié-Gonnard) |
| * Allow R and A to point to same mpi in mpi_div_mpi (found by Manuel |
| Pégourié-Gonnard) |
| * Added max length check for rsa_pkcs1_sign with PKCS#1 v2.1 |
| * Memory leak when using RSA_PKCS_V21 operations fixed |
| * Handle encryption with private key and decryption with public key as per |
| RFC 2313 |
| * Fixes for MSVC6 |
| |
| Security |
| * Fixed potential memory zeroization on miscrafted RSA key (found by Eloi |
| Vanderbeken) |
| |
| = Version 1.1.4 released on 2012-05-31 |
| Bugfix |
| * Correctly handle empty SSL/TLS packets (Found by James Yonan) |
| * Fixed potential heap corruption in x509_name allocation |
| * Fixed single RSA test that failed on Big Endian systems (Closes ticket #54) |
| |
| = Version 1.1.3 released on 2012-04-29 |
| Bugfix |
| * Fixed random MPI generation to not generate more size than requested. |
| |
| = Version 1.1.2 released on 2012-04-26 |
| Bugfix |
| * Fixed handling error in mpi_cmp_mpi() on longer B values (found by |
| Hui Dong) |
| |
| Security |
| * Fixed potential memory corruption on miscrafted client messages (found by |
| Frama-C team at CEA LIST) |
| * Fixed generation of DHM parameters to correct length (found by Ruslan |
| Yushchenko) |
| |
| = Version 1.1.1 released on 2012-01-23 |
| Bugfix |
| * Check for failed malloc() in ssl_set_hostname() and x509_get_entries() |
| (Closes ticket #47, found by Hugo Leisink) |
| * Fixed issues with Intel compiler on 64-bit systems (Closes ticket #50) |
| * Fixed multiple compiler warnings for VS6 and armcc |
| * Fixed bug in CTR_CRBG selftest |
| |
| = Version 1.1.0 released on 2011-12-22 |
| Features |
| * Added ssl_session_reset() to allow better multi-connection pools of |
| SSL contexts without needing to set all non-connection-specific |
| data and pointers again. Adapted ssl_server to use this functionality. |
| * Added ssl_set_max_version() to allow clients to offer a lower maximum |
| supported version to a server to help buggy server implementations. |
| (Closes ticket #36) |
| * Added cipher_get_cipher_mode() and cipher_get_cipher_operation() |
| introspection functions (Closes ticket #40) |
| * Added CTR_DRBG based on AES-256-CTR (NIST SP 800-90) random generator |
| * Added a generic entropy accumulator that provides support for adding |
| custom entropy sources and added some generic and platform dependent |
| entropy sources |
| |
| Changes |
| * Documentation for AES and Camellia in modes CTR and CFB128 clarified. |
| * Fixed rsa_encrypt and rsa_decrypt examples to use public key for |
| encryption and private key for decryption. (Closes ticket #34) |
| * Inceased maximum size of ASN1 length reads to 32-bits. |
| * Added an EXPLICIT tag number parameter to x509_get_ext() |
| * Added a separate CRL entry extension parsing function |
| * Separated the ASN.1 parsing code from the X.509 specific parsing code. |
| So now there is a module that is controlled with POLARSSL_ASN1_PARSE_C. |
| * Changed the defined key-length of DES ciphers in cipher.h to include the |
| parity bits, to prevent mistakes in copying data. (Closes ticket #33) |
| * Loads of minimal changes to better support WINCE as a build target |
| (Credits go to Marco Lizza) |
| * Added POLARSSL_MPI_WINDOW_SIZE definition to allow easier time to memory |
| trade-off |
| * Introduced POLARSSL_MPI_MAX_SIZE and POLARSSL_MPI_MAX_BITS for MPI size |
| management (Closes ticket #44) |
| * Changed the used random function pointer to more flexible format. Renamed |
| havege_rand() to havege_random() to prevent mistakes. Lots of changes as |
| a consequence in library code and programs |
| * Moved all examples programs to use the new entropy and CTR_DRBG |
| * Added permissive certificate parsing to x509parse_crt() and |
| x509parse_crtfile(). With permissive parsing the parsing does not stop on |
| encountering a parse-error. Beware that the meaning of return values has |
| changed! |
| * All error codes are now negative. Even on mermory failures and IO errors. |
| |
| Bugfix |
| * Fixed faulty HMAC-MD2 implementation. Found by dibac. (Closes |
| ticket #37) |
| * Fixed a bug where the CRL parser expected an EXPLICIT ASN.1 tag |
| before version numbers |
| * Allowed X509 key usage parsing to accept 4 byte values instead of the |
| standard 1 byte version sometimes used by Microsoft. (Closes ticket #38) |
| * Fixed incorrect behaviour in case of RSASSA-PSS with a salt length |
| smaller than the hash length. (Closes ticket #41) |
| * If certificate serial is longer than 32 octets, serial number is now |
| appended with '....' after first 28 octets |
| * Improved build support for s390x and sparc64 in bignum.h |
| * Fixed MS Visual C++ name clash with int64 in sha4.h |
| * Corrected removal of leading "00:" in printing serial numbers in |
| certificates and CRLs |
| |
| = Version 1.0.0 released on 2011-07-27 |
| Features |
| * Expanded cipher layer with support for CFB128 and CTR mode |
| * Added rsa_encrypt and rsa_decrypt simple example programs. |
| |
| Changes |
| * The generic cipher and message digest layer now have normal error |
| codes instead of integers |
| |
| Bugfix |
| * Undid faulty bug fix in ssl_write() when flushing old data (Ticket |
| #18) |
| |
| = Version 0.99-pre5 released on 2011-05-26 |
| Features |
| * Added additional Cipher Block Modes to symmetric ciphers |
| (AES CTR, Camellia CTR, XTEA CBC) including the option to |
| enable and disable individual modes when needed |
| * Functions requiring File System functions can now be disabled |
| by undefining POLARSSL_FS_IO |
| * A error_strerror function() has been added to translate between |
| error codes and their description. |
| * Added mpi_get_bit() and mpi_set_bit() individual bit setter/getter |
| functions. |
| * Added ssl_mail_client and ssl_fork_server as example programs. |
| |
| Changes |
| * Major argument / variable rewrite. Introduced use of size_t |
| instead of int for buffer lengths and loop variables for |
| better unsigned / signed use. Renamed internal bigint types |
| t_int and t_dbl to t_uint and t_udbl in the process |
| * mpi_init() and mpi_free() now only accept a single MPI |
| argument and do not accept variable argument lists anymore. |
| * The error codes have been remapped and combining error codes |
| is now done with a PLUS instead of an OR as error codes |
| used are negative. |
| * Changed behaviour of net_read(), ssl_fetch_input() and ssl_recv(). |
| net_recv() now returns 0 on EOF instead of |
| POLARSSL_ERR_NET_CONN_RESET. ssl_fetch_input() returns |
| POLARSSL_ERR_SSL_CONN_EOF on an EOF from its f_recv() function. |
| ssl_read() returns 0 if a POLARSSL_ERR_SSL_CONN_EOF is received |
| after the handshake. |
| * Network functions now return POLARSSL_ERR_NET_WANT_READ or |
| POLARSSL_ERR_NET_WANT_WRITE instead of the ambiguous |
| POLARSSL_ERR_NET_TRY_AGAIN |
| |
| = Version 0.99-pre4 released on 2011-04-01 |
| Features |
| * Added support for PKCS#1 v2.1 encoding and thus support |
| for the RSAES-OAEP and RSASSA-PSS operations. |
| * Reading of Public Key files incorporated into default x509 |
| functionality as well. |
| * Added mpi_fill_random() for centralized filling of big numbers |
| with random data (Fixed ticket #10) |
| |
| Changes |
| * Debug print of MPI now removes leading zero octets and |
| displays actual bit size of the value. |
| * x509parse_key() (and as a consequence x509parse_keyfile()) |
| does not zeroize memory in advance anymore. Use rsa_init() |
| before parsing a key or keyfile! |
| |
| Bugfix |
| * Debug output of MPI's now the same independent of underlying |
| platform (32-bit / 64-bit) (Fixes ticket #19, found by Mads |
| Kiilerich and Mihai Militaru) |
| * Fixed bug in ssl_write() when flushing old data (Fixed ticket |
| #18, found by Nikolay Epifanov) |
| * Fixed proper handling of RSASSA-PSS verification with variable |
| length salt lengths |
| |
| = Version 0.99-pre3 released on 2011-02-28 |
| This release replaces version 0.99-pre2 which had possible copyright issues. |
| Features |
| * Parsing PEM private keys encrypted with DES and AES |
| are now supported as well (Fixes ticket #5) |
| * Added crl_app program to allow easy reading and |
| printing of X509 CRLs from file |
| |
| Changes |
| * Parsing of PEM files moved to separate module (Fixes |
| ticket #13). Also possible to remove PEM support for |
| systems only using DER encoding |
| |
| Bugfixes |
| * Corrected parsing of UTCTime dates before 1990 and |
| after 1950 |
| * Support more exotic OID's when parsing certificates |
| (found by Mads Kiilerich) |
| * Support more exotic name representations when parsing |
| certificates (found by Mads Kiilerich) |
| * Replaced the expired test certificates |
| * Do not bail out if no client certificate specified. Try |
| to negotiate anonymous connection (Fixes ticket #12, |
| found by Boris Krasnovskiy) |
| |
| Security fixes |
| * Fixed a possible Man-in-the-Middle attack on the |
| Diffie Hellman key exchange (thanks to Larry Highsmith, |
| Subreption LLC) |
| |
| = Version 0.99-pre1 released on 2011-01-30 |
| Features |
| Note: Most of these features have been donated by Fox-IT |
| * Added Doxygen source code documentation parts |
| * Added reading of DHM context from memory and file |
| * Improved X509 certificate parsing to include extended |
| certificate fields, including Key Usage |
| * Improved certificate verification and verification |
| against the available CRLs |
| * Detection for DES weak keys and parity bits added |
| * Improvements to support integration in other |
| applications: |
| + Added generic message digest and cipher wrapper |
| + Improved information about current capabilities, |
| status, objects and configuration |
| + Added verification callback on certificate chain |
| verification to allow external blacklisting |
| + Additional example programs to show usage |
| * Added support for PKCS#11 through the use of the |
| libpkcs11-helper library |
| |
| Changes |
| * x509parse_time_expired() checks time in addition to |
| the existing date check |
| * The ciphers member of ssl_context and the cipher member |
| of ssl_session have been renamed to ciphersuites and |
| ciphersuite respectively. This clarifies the difference |
| with the generic cipher layer and is better naming |
| altogether |
| |
| = Version 0.14.0 released on 2010-08-16 |
| Features |
| * Added support for SSL_EDH_RSA_AES_128_SHA and |
| SSL_EDH_RSA_CAMELLIA_128_SHA ciphersuites |
| * Added compile-time and run-time version information |
| * Expanded ssl_client2 arguments for more flexibility |
| * Added support for TLS v1.1 |
| |
| Changes |
| * Made Makefile cleaner |
| * Removed dependency on rand() in rsa_pkcs1_encrypt(). |
| Now using random fuction provided to function and |
| changed the prototype of rsa_pkcs1_encrypt(), |
| rsa_init() and rsa_gen_key(). |
| * Some SSL defines were renamed in order to avoid |
| future confusion |
| |
| Bug fixes |
| * Fixed CMake out of source build for tests (found by |
| kkert) |
| * rsa_check_private() now supports PKCS1v2 keys as well |
| * Fixed deadlock in rsa_pkcs1_encrypt() on failing random |
| generator |
| |
| = Version 0.13.1 released on 2010-03-24 |
| Bug fixes |
| * Fixed Makefile in library that was mistakenly merged |
| * Added missing const string fixes |
| |
| = Version 0.13.0 released on 2010-03-21 |
| Features |
| * Added option parsing for host and port selection to |
| ssl_client2 |
| * Added support for GeneralizedTime in X509 parsing |
| * Added cert_app program to allow easy reading and |
| printing of X509 certificates from file or SSL |
| connection. |
| |
| Changes |
| * Added const correctness for main code base |
| * X509 signature algorithm determination is now |
| in a function to allow easy future expansion |
| * Changed symmetric cipher functions to |
| identical interface (returning int result values) |
| * Changed ARC4 to use seperate input/output buffer |
| * Added reset function for HMAC context as speed-up |
| for specific use-cases |
| |
| Bug fixes |
| * Fixed bug resulting in failure to send the last |
| certificate in the chain in ssl_write_certificate() and |
| ssl_write_certificate_request() (found by fatbob) |
| * Added small fixes for compiler warnings on a Mac |
| (found by Frank de Brabander) |
| * Fixed algorithmic bug in mpi_is_prime() (found by |
| Smbat Tonoyan) |
| |
| = Version 0.12.1 released on 2009-10-04 |
| Changes |
| * Coverage test definitions now support 'depends_on' |
| tagging system. |
| * Tests requiring specific hashing algorithms now honor |
| the defines. |
| |
| Bug fixes |
| * Changed typo in #ifdef in x509parse.c (found |
| by Eduardo) |
| |
| = Version 0.12.0 released on 2009-07-28 |
| Features |
| * Added CMake makefiles as alternative to regular Makefiles. |
| * Added preliminary Code Coverage tests for AES, ARC4, |
| Base64, MPI, SHA-family, MD-family, HMAC-SHA-family, |
| Camellia, DES, 3-DES, RSA PKCS#1, XTEA, Diffie-Hellman |
| and X509parse. |
| |
| Changes |
| * Error codes are not (necessarily) negative. Keep |
| this is mind when checking for errors. |
| * RSA_RAW renamed to SIG_RSA_RAW for consistency. |
| * Fixed typo in name of POLARSSL_ERR_RSA_OUTPUT_TOO_LARGE. |
| * Changed interface for AES and Camellia setkey functions |
| to indicate invalid key lengths. |
| |
| Bug fixes |
| * Fixed include location of endian.h on FreeBSD (found by |
| Gabriel) |
| * Fixed include location of endian.h and name clash on |
| Apples (found by Martin van Hensbergen) |
| * Fixed HMAC-MD2 by modifying md2_starts(), so that the |
| required HMAC ipad and opad variables are not cleared. |
| (found by code coverage tests) |
| * Prevented use of long long in bignum if |
| POLARSSL_HAVE_LONGLONG not defined (found by Giles |
| Bathgate). |
| * Fixed incorrect handling of negative strings in |
| mpi_read_string() (found by code coverage tests). |
| * Fixed segfault on handling empty rsa_context in |
| rsa_check_pubkey() and rsa_check_privkey() (found by |
| code coverage tests). |
| * Fixed incorrect handling of one single negative input |
| value in mpi_add_abs() (found by code coverage tests). |
| * Fixed incorrect handling of negative first input |
| value in mpi_sub_abs() (found by code coverage tests). |
| * Fixed incorrect handling of negative first input |
| value in mpi_mod_mpi() and mpi_mod_int(). Resulting |
| change also affects mpi_write_string() (found by code |
| coverage tests). |
| * Corrected is_prime() results for 0, 1 and 2 (found by |
| code coverage tests). |
| * Fixed Camellia and XTEA for 64-bit Windows systems. |
| |
| = Version 0.11.1 released on 2009-05-17 |
| * Fixed missing functionality for SHA-224, SHA-256, SHA384, |
| SHA-512 in rsa_pkcs1_sign() |
| |
| = Version 0.11.0 released on 2009-05-03 |
| * Fixed a bug in mpi_gcd() so that it also works when both |
| input numbers are even and added testcases to check |
| (found by Pierre Habouzit). |
| * Added support for SHA-224, SHA-256, SHA-384 and SHA-512 |
| one way hash functions with the PKCS#1 v1.5 signing and |
| verification. |
| * Fixed minor bug regarding mpi_gcd located within the |
| POLARSSL_GENPRIME block. |
| * Fixed minor memory leak in x509parse_crt() and added better |
| handling of 'full' certificate chains (found by Mathias |
| Olsson). |
| * Centralized file opening and reading for x509 files into |
| load_file() |
| * Made definition of net_htons() endian-clean for big endian |
| systems (Found by Gernot). |
| * Undefining POLARSSL_HAVE_ASM now also handles prevents asm in |
| padlock and timing code. |
| * Fixed an off-by-one buffer allocation in ssl_set_hostname() |
| responsible for crashes and unwanted behaviour. |
| * Added support for Certificate Revocation List (CRL) parsing. |
| * Added support for CRL revocation to x509parse_verify() and |
| SSL/TLS code. |
| * Fixed compatibility of XTEA and Camellia on a 64-bit system |
| (found by Felix von Leitner). |
| |
| = Version 0.10.0 released on 2009-01-12 |
| * Migrated XySSL to PolarSSL |
| * Added XTEA symmetric cipher |
| * Added Camellia symmetric cipher |
| * Added support for ciphersuites: SSL_RSA_CAMELLIA_128_SHA, |
| SSL_RSA_CAMELLIA_256_SHA and SSL_EDH_RSA_CAMELLIA_256_SHA |
| * Fixed dangerous bug that can cause a heap overflow in |
| rsa_pkcs1_decrypt (found by Christophe Devine) |
| |
| ================================================================ |
| XySSL ChangeLog |
| |
| = Version 0.9 released on 2008-03-16 |
| |
| * Added support for ciphersuite: SSL_RSA_AES_128_SHA |
| * Enabled support for large files by default in aescrypt2.c |
| * Preliminary openssl wrapper contributed by David Barrett |
| * Fixed a bug in ssl_write() that caused the same payload to |
| be sent twice in non-blocking mode when send returns EAGAIN |
| * Fixed ssl_parse_client_hello(): session id and challenge must |
| not be swapped in the SSLv2 ClientHello (found by Greg Robson) |
| * Added user-defined callback debug function (Krystian Kolodziej) |
| * Before freeing a certificate, properly zero out all cert. data |
| * Fixed the "mode" parameter so that encryption/decryption are |
| not swapped on PadLock; also fixed compilation on older versions |
| of gcc (bug reported by David Barrett) |
| * Correctly handle the case in padlock_xcryptcbc() when input or |
| ouput data is non-aligned by falling back to the software |
| implementation, as VIA Nehemiah cannot handle non-aligned buffers |
| * Fixed a memory leak in x509parse_crt() which was reported by Greg |
| Robson-Garth; some x509write.c fixes by Pascal Vizeli, thanks to |
| Matthew Page who reported several bugs |
| * Fixed x509_get_ext() to accept some rare certificates which have |
| an INTEGER instead of a BOOLEAN for BasicConstraints::cA. |
| * Added support on the client side for the TLS "hostname" extension |
| (patch contributed by David Patino) |
| * Make x509parse_verify() return BADCERT_CN_MISMATCH when an empty |
| string is passed as the CN (bug reported by spoofy) |
| * Added an option to enable/disable the BN assembly code |
| * Updated rsa_check_privkey() to verify that (D*E) = 1 % (P-1)*(Q-1) |
| * Disabled obsolete hash functions by default (MD2, MD4); updated |
| selftest and benchmark to not test ciphers that have been disabled |
| * Updated x509parse_cert_info() to correctly display byte 0 of the |
| serial number, setup correct server port in the ssl client example |
| * Fixed a critical denial-of-service with X.509 cert. verification: |
| peer may cause xyssl to loop indefinitely by sending a certificate |
| for which the RSA signature check fails (bug reported by Benoit) |
| * Added test vectors for: AES-CBC, AES-CFB, DES-CBC and 3DES-CBC, |
| HMAC-MD5, HMAC-SHA1, HMAC-SHA-256, HMAC-SHA-384, and HMAC-SHA-512 |
| * Fixed HMAC-SHA-384 and HMAC-SHA-512 (thanks to Josh Sinykin) |
| * Modified ssl_parse_client_key_exchange() to protect against |
| Daniel Bleichenbacher attack on PKCS#1 v1.5 padding, as well |
| as the Klima-Pokorny-Rosa extension of Bleichenbacher's attack |
| * Updated rsa_gen_key() so that ctx->N is always nbits in size |
| * Fixed assembly PPC compilation errors on Mac OS X, thanks to |
| David Barrett and Dusan Semen |
| |
| = Version 0.8 released on 2007-10-20 |
| |
| * Modified the HMAC functions to handle keys larger |
| than 64 bytes, thanks to Stephane Desneux and gary ng |
| * Fixed ssl_read_record() to properly update the handshake |
| message digests, which fixes IE6/IE7 client authentication |
| * Cleaned up the XYSSL* #defines, suggested by Azriel Fasten |
| * Fixed net_recv(), thanks to Lorenz Schori and Egon Kocjan |
| * Added user-defined callbacks for handling I/O and sessions |
| * Added lots of debugging output in the SSL/TLS functions |
| * Added preliminary X.509 cert. writing by Pascal Vizeli |
| * Added preliminary support for the VIA PadLock routines |
| * Added AES-CFB mode of operation, contributed by chmike |
| * Added an SSL/TLS stress testing program (ssl_test.c) |
| * Updated the RSA PKCS#1 code to allow choosing between |
| RSA_PUBLIC and RSA_PRIVATE, as suggested by David Barrett |
| * Updated ssl_read() to skip 0-length records from OpenSSL |
| * Fixed the make install target to comply with *BSD make |
| * Fixed a bug in mpi_read_binary() on 64-bit platforms |
| * mpi_is_prime() speedups, thanks to Kevin McLaughlin |
| * Fixed a long standing memory leak in mpi_is_prime() |
| * Replaced realloc with malloc in mpi_grow(), and set |
| the sign of zero as positive in mpi_init() (reported |
| by Jonathan M. McCune) |
| |
| = Version 0.7 released on 2007-07-07 |
| |
| * Added support for the MicroBlaze soft-core processor |
| * Fixed a bug in ssl_tls.c which sometimes prevented SSL |
| connections from being established with non-blocking I/O |
| * Fixed a couple bugs in the VS6 and UNIX Makefiles |
| * Fixed the "PIC register ebx clobbered in asm" bug |
| * Added HMAC starts/update/finish support functions |
| * Added the SHA-224, SHA-384 and SHA-512 hash functions |
| * Fixed the net_set_*block routines, thanks to Andreas |
| * Added a few demonstration programs: md5sum, sha1sum, |
| dh_client, dh_server, rsa_genkey, rsa_sign, rsa_verify |
| * Added new bignum import and export helper functions |
| * Rewrote README.txt in program/ssl/ca to better explain |
| how to create a test PKI |
| |
| = Version 0.6 released on 2007-04-01 |
| |
| * Ciphers used in SSL/TLS can now be disabled at compile |
| time, to reduce the memory footprint on embedded systems |
| * Added multiply assembly code for the TriCore and modified |
| havege_struct for this processor, thanks to David Patiño |
| * Added multiply assembly code for 64-bit PowerPCs, |
| thanks to Peking University and the OSU Open Source Lab |
| * Added experimental support of Quantum Cryptography |
| * Added support for autoconf, contributed by Arnaud Cornet |
| * Fixed "long long" compilation issues on IA-64 and PPC64 |
| * Fixed a bug introduced in xyssl-0.5/timing.c: hardclock |
| was not being correctly defined on ARM and MIPS |
| |
| = Version 0.5 released on 2007-03-01 |
| |
| * Added multiply assembly code for SPARC and Alpha |
| * Added (beta) support for non-blocking I/O operations |
| * Implemented session resuming and client authentication |
| * Fixed some portability issues on WinCE, MINIX 3, Plan9 |
| (thanks to Benjamin Newman), HP-UX, FreeBSD and Solaris |
| * Improved the performance of the EDH key exchange |
| * Fixed a bug that caused valid packets with a payload |
| size of 16384 bytes to be rejected |
| |
| = Version 0.4 released on 2007-02-01 |
| |
| * Added support for Ephemeral Diffie-Hellman key exchange |
| * Added multiply asm code for SSE2, ARM, PPC, MIPS and M68K |
| * Various improvement to the modular exponentiation code |
| * Rewrote the headers to generate the API docs with doxygen |
| * Fixed a bug in ssl_encrypt_buf (incorrect padding was |
| generated) and in ssl_parse_client_hello (max. client |
| version was not properly set), thanks to Didier Rebeix |
| * Fixed another bug in ssl_parse_client_hello: clients with |
| cipherlists larger than 96 bytes were incorrectly rejected |
| * Fixed a couple memory leak in x509_read.c |
| |
| = Version 0.3 released on 2007-01-01 |
| |
| * Added server-side SSLv3 and TLSv1.0 support |
| * Multiple fixes to enhance the compatibility with g++, |
| thanks to Xosé Antón Otero Ferreira |
| * Fixed a bug in the CBC code, thanks to dowst; also, |
| the bignum code is no longer dependant on long long |
| * Updated rsa_pkcs1_sign to handle arbitrary large inputs |
| * Updated timing.c for improved compatibility with i386 |
| and 486 processors, thanks to Arnaud Cornet |
| |
| = Version 0.2 released on 2006-12-01 |
| |
| * Updated timing.c to support ARM and MIPS arch |
| * Updated the MPI code to support 8086 on MSVC 1.5 |
| * Added the copyright notice at the top of havege.h |
| * Fixed a bug in sha2_hmac, thanks to newsoft/Wenfang Zhang |
| * Fixed a bug reported by Adrian Rüegsegger in x509_read_key |
| * Fixed a bug reported by Torsten Lauter in ssl_read_record |
| * Fixed a bug in rsa_check_privkey that would wrongly cause |
| valid RSA keys to be dismissed (thanks to oldwolf) |
| * Fixed a bug in mpi_is_prime that caused some primes to fail |
| the Miller-Rabin primality test |
| |
| I'd also like to thank Younès Hafri for the CRUX linux port, |
| Khalil Petit who added XySSL into pkgsrc and Arnaud Cornet |
| who maintains the Debian package :-) |
| |
| = Version 0.1 released on 2006-11-01 |
| |