| #!/bin/bash |
| |
| # Test interop with OpenSSL and GnuTLS (and self-op while at it). |
| # |
| # Check each common ciphersuite, with each version, both ways (client/server), |
| # with and without client authentication. |
| |
| # test if those two are set in the environment before assigning defaults |
| if [ -n "$GNUTLS_CLI" -a -n "$GNUTLS_SERV" ]; then |
| GNUTLS_AVAILABLE=1 |
| else |
| GNUTLS_AVAILABLE=0 |
| fi |
| |
| # catch undefined variables from now on |
| set -u |
| |
| # initialise counters |
| let "tests = 0" |
| let "failed = 0" |
| let "skipped = 0" |
| let "srvmem = 0" |
| |
| # default commands, can be overriden by the environment |
| : ${P_SRV:=../programs/ssl/ssl_server2} |
| : ${P_CLI:=../programs/ssl/ssl_client2} |
| : ${OPENSSL_CMD:=openssl} # OPENSSL would conflict with the build system |
| : ${GNUTLS_CLI:=gnutls-cli} |
| : ${GNUTLS_SERV:=gnutls-serv} |
| |
| # default values for options |
| MODES="ssl3 tls1 tls1_1 tls1_2" |
| VERIFIES="NO YES" |
| TYPES="ECDSA RSA PSK" |
| FILTER="" |
| EXCLUDE='NULL\|DES-CBC-' # avoid plain DES but keep 3DES-EDE-CBC (PolarSSL), DES-CBC3 (OpenSSL) |
| VERBOSE="" |
| MEMCHECK=0 |
| # GnuTLS not enabled by default, 3.2.4 might not be available everywhere |
| if [ "$GNUTLS_AVAILABLE" -gt 0 ]; then |
| PEERS="OpenSSL PolarSSL GnuTLS" |
| else |
| PEERS="OpenSSL PolarSSL" |
| fi |
| |
| print_usage() { |
| echo "Usage: $0" |
| echo -e " -h|--help\tPrint this help." |
| echo -e " -f|--filter\tOnly matching ciphersuites are tested (Default: '$FILTER')" |
| echo -e " -e|--exclude\tMatching ciphersuites are excluded (Default: '$EXCLUDE')" |
| echo -e " -m|--modes\tWhich modes to perform (Default: '$MODES')" |
| echo -e " -t|--types\tWhich key exchange type to perform (Default: '$TYPES')" |
| echo -e " -V|--verify\tWhich verification modes to perform (Default: '$VERIFIES')" |
| echo -e " -p|--peers\tWhich peers to use (Default: '$PEERS')" |
| echo -e " \tAlso available: GnuTLS (needs v3.2.4 or higher)" |
| echo -e " -M|--memcheck\tCheck memory leaks and errors." |
| echo -e " -v|--verbose\tSet verbose output." |
| } |
| |
| get_options() { |
| while [ $# -gt 0 ]; do |
| case "$1" in |
| -f|--filter) |
| shift; FILTER=$1 |
| ;; |
| -e|--exclude) |
| shift; EXCLUDE=$1 |
| ;; |
| -m|--modes) |
| shift; MODES=$1 |
| ;; |
| -t|--types) |
| shift; TYPES=$1 |
| ;; |
| -V|--verify) |
| shift; VERIFIES=$1 |
| ;; |
| -p|--peers) |
| shift; PEERS=$1 |
| ;; |
| -v|--verbose) |
| VERBOSE=1 |
| ;; |
| -M|--memcheck) |
| MEMCHECK=1 |
| ;; |
| -h|--help) |
| print_usage |
| exit 0 |
| ;; |
| *) |
| echo "Unknown argument: '$1'" |
| print_usage |
| exit 1 |
| ;; |
| esac |
| shift |
| done |
| } |
| |
| log() { |
| if [ "X" != "X$VERBOSE" ]; then |
| echo "$@" |
| fi |
| } |
| |
| filter() |
| { |
| LIST="$1" |
| NEW_LIST="" |
| |
| for i in $LIST; |
| do |
| NEW_LIST="$NEW_LIST $( echo "$i" | grep "$FILTER" | grep -v "$EXCLUDE" )" |
| done |
| |
| # normalize whitespace |
| echo "$NEW_LIST" | sed -e 's/[[:space:]]\+/ /g' -e 's/^ //' -e 's/ $//' |
| } |
| |
| filter_ciphersuites() |
| { |
| if [ "X" != "X$FILTER" -o "X" != "X$EXCLUDE" ]; |
| then |
| P_CIPHERS=$( filter "$P_CIPHERS" ) |
| O_CIPHERS=$( filter "$O_CIPHERS" ) |
| G_CIPHERS=$( filter "$G_CIPHERS" ) |
| fi |
| } |
| |
| reset_ciphersuites() |
| { |
| P_CIPHERS="" |
| O_CIPHERS="" |
| G_CIPHERS="" |
| } |
| |
| add_common_ciphersuites() |
| { |
| case $TYPE in |
| |
| "ECDSA") |
| if [ "$MODE" != "ssl3" ]; |
| then |
| P_CIPHERS="$P_CIPHERS \ |
| TLS-ECDHE-ECDSA-WITH-NULL-SHA \ |
| TLS-ECDHE-ECDSA-WITH-RC4-128-SHA \ |
| TLS-ECDHE-ECDSA-WITH-3DES-EDE-CBC-SHA \ |
| TLS-ECDHE-ECDSA-WITH-AES-128-CBC-SHA \ |
| TLS-ECDHE-ECDSA-WITH-AES-256-CBC-SHA \ |
| " |
| G_CIPHERS="$G_CIPHERS \ |
| +ECDHE-ECDSA:+NULL:+SHA1 \ |
| +ECDHE-ECDSA:+ARCFOUR-128:+SHA1 \ |
| +ECDHE-ECDSA:+3DES-CBC:+SHA1 \ |
| +ECDHE-ECDSA:+AES-128-CBC:+SHA1 \ |
| +ECDHE-ECDSA:+AES-256-CBC:+SHA1 \ |
| " |
| O_CIPHERS="$O_CIPHERS \ |
| ECDHE-ECDSA-NULL-SHA \ |
| ECDHE-ECDSA-RC4-SHA \ |
| ECDHE-ECDSA-DES-CBC3-SHA \ |
| ECDHE-ECDSA-AES128-SHA \ |
| ECDHE-ECDSA-AES256-SHA \ |
| " |
| fi |
| if [ "$MODE" = "tls1_2" ]; |
| then |
| P_CIPHERS="$P_CIPHERS \ |
| TLS-ECDHE-ECDSA-WITH-AES-128-CBC-SHA256 \ |
| TLS-ECDHE-ECDSA-WITH-AES-256-CBC-SHA384 \ |
| TLS-ECDHE-ECDSA-WITH-AES-128-GCM-SHA256 \ |
| TLS-ECDHE-ECDSA-WITH-AES-256-GCM-SHA384 \ |
| " |
| G_CIPHERS="$G_CIPHERS \ |
| +ECDHE-ECDSA:+AES-128-CBC:+SHA256 \ |
| +ECDHE-ECDSA:+AES-256-CBC:+SHA384 \ |
| +ECDHE-ECDSA:+AES-128-GCM:+AEAD \ |
| +ECDHE-ECDSA:+AES-256-GCM:+AEAD \ |
| " |
| O_CIPHERS="$O_CIPHERS \ |
| ECDHE-ECDSA-AES128-SHA256 \ |
| ECDHE-ECDSA-AES256-SHA384 \ |
| ECDHE-ECDSA-AES128-GCM-SHA256 \ |
| ECDHE-ECDSA-AES256-GCM-SHA384 \ |
| " |
| fi |
| ;; |
| |
| "RSA") |
| P_CIPHERS="$P_CIPHERS \ |
| TLS-DHE-RSA-WITH-AES-128-CBC-SHA \ |
| TLS-DHE-RSA-WITH-AES-256-CBC-SHA \ |
| TLS-DHE-RSA-WITH-CAMELLIA-128-CBC-SHA \ |
| TLS-DHE-RSA-WITH-CAMELLIA-256-CBC-SHA \ |
| TLS-DHE-RSA-WITH-3DES-EDE-CBC-SHA \ |
| TLS-RSA-WITH-AES-256-CBC-SHA \ |
| TLS-RSA-WITH-CAMELLIA-256-CBC-SHA \ |
| TLS-RSA-WITH-AES-128-CBC-SHA \ |
| TLS-RSA-WITH-CAMELLIA-128-CBC-SHA \ |
| TLS-RSA-WITH-3DES-EDE-CBC-SHA \ |
| TLS-RSA-WITH-RC4-128-SHA \ |
| TLS-RSA-WITH-RC4-128-MD5 \ |
| TLS-RSA-WITH-NULL-MD5 \ |
| TLS-RSA-WITH-NULL-SHA \ |
| " |
| G_CIPHERS="$G_CIPHERS \ |
| +DHE-RSA:+AES-128-CBC:+SHA1 \ |
| +DHE-RSA:+AES-256-CBC:+SHA1 \ |
| +DHE-RSA:+CAMELLIA-128-CBC:+SHA1 \ |
| +DHE-RSA:+CAMELLIA-256-CBC:+SHA1 \ |
| +DHE-RSA:+3DES-CBC:+SHA1 \ |
| +RSA:+AES-256-CBC:+SHA1 \ |
| +RSA:+CAMELLIA-256-CBC:+SHA1 \ |
| +RSA:+AES-128-CBC:+SHA1 \ |
| +RSA:+CAMELLIA-128-CBC:+SHA1 \ |
| +RSA:+3DES-CBC:+SHA1 \ |
| +RSA:+ARCFOUR-128:+SHA1 \ |
| +RSA:+ARCFOUR-128:+MD5 \ |
| +RSA:+NULL:+MD5 \ |
| +RSA:+NULL:+SHA1 \ |
| " |
| O_CIPHERS="$O_CIPHERS \ |
| DHE-RSA-AES128-SHA \ |
| DHE-RSA-AES256-SHA \ |
| DHE-RSA-CAMELLIA128-SHA \ |
| DHE-RSA-CAMELLIA256-SHA \ |
| EDH-RSA-DES-CBC3-SHA \ |
| AES256-SHA \ |
| CAMELLIA256-SHA \ |
| AES128-SHA \ |
| CAMELLIA128-SHA \ |
| DES-CBC3-SHA \ |
| RC4-SHA \ |
| RC4-MD5 \ |
| NULL-MD5 \ |
| NULL-SHA \ |
| " |
| if [ "$MODE" != "ssl3" ]; |
| then |
| P_CIPHERS="$P_CIPHERS \ |
| TLS-ECDHE-RSA-WITH-AES-128-CBC-SHA \ |
| TLS-ECDHE-RSA-WITH-AES-256-CBC-SHA \ |
| TLS-ECDHE-RSA-WITH-3DES-EDE-CBC-SHA \ |
| TLS-ECDHE-RSA-WITH-RC4-128-SHA \ |
| TLS-ECDHE-RSA-WITH-NULL-SHA \ |
| " |
| G_CIPHERS="$G_CIPHERS \ |
| +ECDHE-RSA:+AES-128-CBC:+SHA1 \ |
| +ECDHE-RSA:+AES-256-CBC:+SHA1 \ |
| +ECDHE-RSA:+3DES-CBC:+SHA1 \ |
| +ECDHE-RSA:+ARCFOUR-128:+SHA1 \ |
| +ECDHE-RSA:+NULL:+SHA1 \ |
| " |
| O_CIPHERS="$O_CIPHERS \ |
| ECDHE-RSA-AES256-SHA \ |
| ECDHE-RSA-AES128-SHA \ |
| ECDHE-RSA-DES-CBC3-SHA \ |
| ECDHE-RSA-RC4-SHA \ |
| ECDHE-RSA-NULL-SHA \ |
| " |
| fi |
| if [ "$MODE" = "tls1_2" ]; |
| then |
| P_CIPHERS="$P_CIPHERS \ |
| TLS-RSA-WITH-NULL-SHA256 \ |
| TLS-RSA-WITH-AES-128-CBC-SHA256 \ |
| TLS-DHE-RSA-WITH-AES-128-CBC-SHA256 \ |
| TLS-RSA-WITH-AES-256-CBC-SHA256 \ |
| TLS-DHE-RSA-WITH-AES-256-CBC-SHA256 \ |
| TLS-ECDHE-RSA-WITH-AES-128-CBC-SHA256 \ |
| TLS-ECDHE-RSA-WITH-AES-256-CBC-SHA384 \ |
| TLS-RSA-WITH-AES-128-GCM-SHA256 \ |
| TLS-RSA-WITH-AES-256-GCM-SHA384 \ |
| TLS-DHE-RSA-WITH-AES-128-GCM-SHA256 \ |
| TLS-DHE-RSA-WITH-AES-256-GCM-SHA384 \ |
| TLS-ECDHE-RSA-WITH-AES-128-GCM-SHA256 \ |
| TLS-ECDHE-RSA-WITH-AES-256-GCM-SHA384 \ |
| " |
| G_CIPHERS="$G_CIPHERS \ |
| +RSA:+NULL:+SHA256 \ |
| +RSA:+AES-128-CBC:+SHA256 \ |
| +DHE-RSA:+AES-128-CBC:+SHA256 \ |
| +RSA:+AES-256-CBC:+SHA256 \ |
| +DHE-RSA:+AES-256-CBC:+SHA256 \ |
| +ECDHE-RSA:+AES-128-CBC:+SHA256 \ |
| +ECDHE-RSA:+AES-256-CBC:+SHA384 \ |
| +RSA:+AES-128-GCM:+AEAD \ |
| +RSA:+AES-256-GCM:+AEAD \ |
| +DHE-RSA:+AES-128-GCM:+AEAD \ |
| +DHE-RSA:+AES-256-GCM:+AEAD \ |
| +ECDHE-RSA:+AES-128-GCM:+AEAD \ |
| +ECDHE-RSA:+AES-256-GCM:+AEAD \ |
| " |
| O_CIPHERS="$O_CIPHERS \ |
| NULL-SHA256 \ |
| AES128-SHA256 \ |
| DHE-RSA-AES128-SHA256 \ |
| AES256-SHA256 \ |
| DHE-RSA-AES256-SHA256 \ |
| ECDHE-RSA-AES128-SHA256 \ |
| ECDHE-RSA-AES256-SHA384 \ |
| AES128-GCM-SHA256 \ |
| DHE-RSA-AES128-GCM-SHA256 \ |
| AES256-GCM-SHA384 \ |
| DHE-RSA-AES256-GCM-SHA384 \ |
| ECDHE-RSA-AES128-GCM-SHA256 \ |
| ECDHE-RSA-AES256-GCM-SHA384 \ |
| " |
| fi |
| ;; |
| |
| "PSK") |
| P_CIPHERS="$P_CIPHERS \ |
| TLS-PSK-WITH-RC4-128-SHA \ |
| TLS-PSK-WITH-3DES-EDE-CBC-SHA \ |
| TLS-PSK-WITH-AES-128-CBC-SHA \ |
| TLS-PSK-WITH-AES-256-CBC-SHA \ |
| " |
| G_CIPHERS="$G_CIPHERS \ |
| +PSK:+ARCFOUR-128:+SHA1 \ |
| +PSK:+3DES-CBC:+SHA1 \ |
| +PSK:+AES-128-CBC:+SHA1 \ |
| +PSK:+AES-256-CBC:+SHA1 \ |
| " |
| O_CIPHERS="$O_CIPHERS \ |
| PSK-RC4-SHA \ |
| PSK-3DES-EDE-CBC-SHA \ |
| PSK-AES128-CBC-SHA \ |
| PSK-AES256-CBC-SHA \ |
| " |
| ;; |
| esac |
| } |
| |
| add_openssl_ciphersuites() |
| { |
| case $TYPE in |
| |
| "ECDSA") |
| if [ "$MODE" != "ssl3" ]; |
| then |
| P_CIPHERS="$P_CIPHERS \ |
| TLS-ECDH-ECDSA-WITH-NULL-SHA \ |
| TLS-ECDH-ECDSA-WITH-RC4-128-SHA \ |
| TLS-ECDH-ECDSA-WITH-3DES-EDE-CBC-SHA \ |
| TLS-ECDH-ECDSA-WITH-AES-128-CBC-SHA \ |
| TLS-ECDH-ECDSA-WITH-AES-256-CBC-SHA \ |
| " |
| O_CIPHERS="$O_CIPHERS \ |
| ECDH-ECDSA-NULL-SHA \ |
| ECDH-ECDSA-RC4-SHA \ |
| ECDH-ECDSA-DES-CBC3-SHA \ |
| ECDH-ECDSA-AES128-SHA \ |
| ECDH-ECDSA-AES256-SHA \ |
| " |
| fi |
| if [ "$MODE" = "tls1_2" ]; |
| then |
| P_CIPHERS="$P_CIPHERS \ |
| TLS-ECDH-ECDSA-WITH-AES-128-CBC-SHA256 \ |
| TLS-ECDH-ECDSA-WITH-AES-256-CBC-SHA384 \ |
| TLS-ECDH-ECDSA-WITH-AES-128-GCM-SHA256 \ |
| TLS-ECDH-ECDSA-WITH-AES-256-GCM-SHA384 \ |
| " |
| O_CIPHERS="$O_CIPHERS \ |
| ECDH-ECDSA-AES128-SHA256 \ |
| ECDH-ECDSA-AES256-SHA384 \ |
| ECDH-ECDSA-AES128-GCM-SHA256 \ |
| ECDH-ECDSA-AES256-GCM-SHA384 \ |
| " |
| fi |
| ;; |
| |
| "RSA") |
| P_CIPHERS="$P_CIPHERS \ |
| TLS-RSA-WITH-DES-CBC-SHA \ |
| TLS-DHE-RSA-WITH-DES-CBC-SHA \ |
| " |
| O_CIPHERS="$O_CIPHERS \ |
| DES-CBC-SHA \ |
| EDH-RSA-DES-CBC-SHA \ |
| " |
| ;; |
| |
| "PSK") |
| ;; |
| esac |
| } |
| |
| add_gnutls_ciphersuites() |
| { |
| case $TYPE in |
| |
| "ECDSA") |
| if [ "$MODE" = "tls1_2" ]; |
| then |
| P_CIPHERS="$P_CIPHERS \ |
| TLS-ECDHE-ECDSA-WITH-CAMELLIA-128-CBC-SHA256 \ |
| TLS-ECDHE-ECDSA-WITH-CAMELLIA-256-CBC-SHA384 \ |
| TLS-ECDHE-ECDSA-WITH-CAMELLIA-128-GCM-SHA256 \ |
| TLS-ECDHE-ECDSA-WITH-CAMELLIA-256-GCM-SHA384 \ |
| " |
| G_CIPHERS="$G_CIPHERS \ |
| +ECDHE-ECDSA:+CAMELLIA-128-CBC:+SHA256 \ |
| +ECDHE-ECDSA:+CAMELLIA-256-CBC:+SHA384 \ |
| +ECDHE-ECDSA:+CAMELLIA-128-GCM:+AEAD \ |
| +ECDHE-ECDSA:+CAMELLIA-256-GCM:+AEAD \ |
| " |
| fi |
| ;; |
| |
| "RSA") |
| if [ "$MODE" = "tls1_2" ]; |
| then |
| P_CIPHERS="$P_CIPHERS \ |
| TLS-ECDHE-RSA-WITH-CAMELLIA-128-CBC-SHA256 \ |
| TLS-ECDHE-RSA-WITH-CAMELLIA-256-CBC-SHA384 \ |
| TLS-RSA-WITH-CAMELLIA-128-CBC-SHA256 \ |
| TLS-RSA-WITH-CAMELLIA-256-CBC-SHA256 \ |
| TLS-DHE-RSA-WITH-CAMELLIA-128-CBC-SHA256 \ |
| TLS-DHE-RSA-WITH-CAMELLIA-256-CBC-SHA256 \ |
| TLS-ECDHE-RSA-WITH-CAMELLIA-128-GCM-SHA256 \ |
| TLS-ECDHE-RSA-WITH-CAMELLIA-256-GCM-SHA384 \ |
| TLS-DHE-RSA-WITH-CAMELLIA-128-GCM-SHA256 \ |
| TLS-DHE-RSA-WITH-CAMELLIA-256-GCM-SHA384 \ |
| TLS-RSA-WITH-CAMELLIA-128-GCM-SHA256 \ |
| TLS-RSA-WITH-CAMELLIA-256-GCM-SHA384 \ |
| TLS-RSA-WITH-NULL-SHA256 \ |
| TLS-RSA-WITH-NULL-SHA \ |
| TLS-RSA-WITH-NULL-MD5 \ |
| " |
| G_CIPHERS="$G_CIPHERS \ |
| +ECDHE-RSA:+CAMELLIA-128-CBC:+SHA256 \ |
| +ECDHE-RSA:+CAMELLIA-256-CBC:+SHA384 \ |
| +RSA:+CAMELLIA-128-CBC:+SHA256 \ |
| +RSA:+CAMELLIA-256-CBC:+SHA256 \ |
| +DHE-RSA:+CAMELLIA-128-CBC:+SHA256 \ |
| +DHE-RSA:+CAMELLIA-256-CBC:+SHA256 \ |
| +ECDHE-RSA:+CAMELLIA-128-GCM:+AEAD \ |
| +ECDHE-RSA:+CAMELLIA-256-GCM:+AEAD \ |
| +DHE-RSA:+CAMELLIA-128-GCM:+AEAD \ |
| +DHE-RSA:+CAMELLIA-256-GCM:+AEAD \ |
| +RSA:+CAMELLIA-128-GCM:+AEAD \ |
| +RSA:+CAMELLIA-256-GCM:+AEAD \ |
| +RSA:+NULL:+SHA256 \ |
| +RSA:+NULL:+SHA1 \ |
| +RSA:+NULL:+MD5 \ |
| " |
| fi |
| ;; |
| |
| "PSK") |
| # GnuTLS 3.2.11 (2014-02-13) requires TLS 1.x for most *PSK suites |
| if [ "$MODE" != "ssl3" ]; |
| then |
| P_CIPHERS="$P_CIPHERS \ |
| TLS-ECDHE-PSK-WITH-AES-256-CBC-SHA \ |
| TLS-ECDHE-PSK-WITH-AES-128-CBC-SHA \ |
| TLS-ECDHE-PSK-WITH-3DES-EDE-CBC-SHA \ |
| TLS-DHE-PSK-WITH-3DES-EDE-CBC-SHA \ |
| TLS-DHE-PSK-WITH-AES-128-CBC-SHA \ |
| TLS-DHE-PSK-WITH-AES-256-CBC-SHA \ |
| TLS-RSA-PSK-WITH-3DES-EDE-CBC-SHA \ |
| TLS-RSA-PSK-WITH-AES-256-CBC-SHA \ |
| TLS-RSA-PSK-WITH-AES-128-CBC-SHA \ |
| " |
| G_CIPHERS="$G_CIPHERS \ |
| +ECDHE-PSK:+AES-256-CBC:+SHA1 \ |
| +ECDHE-PSK:+AES-128-CBC:+SHA1 \ |
| +ECDHE-PSK:+3DES-CBC:+SHA1 \ |
| +DHE-PSK:+3DES-CBC:+SHA1 \ |
| +DHE-PSK:+AES-128-CBC:+SHA1 \ |
| +DHE-PSK:+AES-256-CBC:+SHA1 \ |
| +RSA-PSK:+3DES-CBC:+SHA1 \ |
| +RSA-PSK:+AES-256-CBC:+SHA1 \ |
| +RSA-PSK:+AES-128-CBC:+SHA1 \ |
| " |
| fi |
| if [ "$MODE" = "tls1_2" ]; |
| then |
| P_CIPHERS="$P_CIPHERS \ |
| TLS-ECDHE-PSK-WITH-AES-256-CBC-SHA384 \ |
| TLS-ECDHE-PSK-WITH-CAMELLIA-256-CBC-SHA384 \ |
| TLS-ECDHE-PSK-WITH-AES-128-CBC-SHA256 \ |
| TLS-ECDHE-PSK-WITH-CAMELLIA-128-CBC-SHA256 \ |
| TLS-ECDHE-PSK-WITH-NULL-SHA384 \ |
| TLS-ECDHE-PSK-WITH-NULL-SHA256 \ |
| TLS-PSK-WITH-AES-128-CBC-SHA256 \ |
| TLS-PSK-WITH-AES-256-CBC-SHA384 \ |
| TLS-DHE-PSK-WITH-AES-128-CBC-SHA256 \ |
| TLS-DHE-PSK-WITH-AES-256-CBC-SHA384 \ |
| TLS-PSK-WITH-NULL-SHA256 \ |
| TLS-PSK-WITH-NULL-SHA384 \ |
| TLS-DHE-PSK-WITH-NULL-SHA256 \ |
| TLS-DHE-PSK-WITH-NULL-SHA384 \ |
| TLS-RSA-PSK-WITH-AES-256-CBC-SHA384 \ |
| TLS-RSA-PSK-WITH-AES-128-CBC-SHA256 \ |
| TLS-RSA-PSK-WITH-NULL-SHA256 \ |
| TLS-RSA-PSK-WITH-NULL-SHA384 \ |
| TLS-DHE-PSK-WITH-CAMELLIA-128-CBC-SHA256 \ |
| TLS-DHE-PSK-WITH-CAMELLIA-256-CBC-SHA384 \ |
| TLS-PSK-WITH-CAMELLIA-128-CBC-SHA256 \ |
| TLS-PSK-WITH-CAMELLIA-256-CBC-SHA384 \ |
| TLS-RSA-PSK-WITH-CAMELLIA-256-CBC-SHA384 \ |
| TLS-RSA-PSK-WITH-CAMELLIA-128-CBC-SHA256 \ |
| TLS-PSK-WITH-AES-128-GCM-SHA256 \ |
| TLS-PSK-WITH-AES-256-GCM-SHA384 \ |
| TLS-DHE-PSK-WITH-AES-128-GCM-SHA256 \ |
| TLS-DHE-PSK-WITH-AES-256-GCM-SHA384 \ |
| TLS-RSA-PSK-WITH-CAMELLIA-128-GCM-SHA256 \ |
| TLS-RSA-PSK-WITH-CAMELLIA-256-GCM-SHA384 \ |
| TLS-PSK-WITH-CAMELLIA-128-GCM-SHA256 \ |
| TLS-PSK-WITH-CAMELLIA-256-GCM-SHA384 \ |
| TLS-DHE-PSK-WITH-CAMELLIA-128-GCM-SHA256 \ |
| TLS-DHE-PSK-WITH-CAMELLIA-256-GCM-SHA384 \ |
| TLS-RSA-PSK-WITH-AES-256-GCM-SHA384 \ |
| TLS-RSA-PSK-WITH-AES-128-GCM-SHA256 \ |
| " |
| G_CIPHERS="$G_CIPHERS \ |
| +ECDHE-PSK:+AES-256-CBC:+SHA384 \ |
| +ECDHE-PSK:+CAMELLIA-256-CBC:+SHA384 \ |
| +ECDHE-PSK:+AES-128-CBC:+SHA256 \ |
| +ECDHE-PSK:+CAMELLIA-128-CBC:+SHA256 \ |
| +PSK:+AES-128-CBC:+SHA256 \ |
| +PSK:+AES-256-CBC:+SHA384 \ |
| +DHE-PSK:+AES-128-CBC:+SHA256 \ |
| +DHE-PSK:+AES-256-CBC:+SHA384 \ |
| +RSA-PSK:+AES-256-CBC:+SHA384 \ |
| +RSA-PSK:+AES-128-CBC:+SHA256 \ |
| +DHE-PSK:+CAMELLIA-128-CBC:+SHA256 \ |
| +DHE-PSK:+CAMELLIA-256-CBC:+SHA384 \ |
| +PSK:+CAMELLIA-128-CBC:+SHA256 \ |
| +PSK:+CAMELLIA-256-CBC:+SHA384 \ |
| +RSA-PSK:+CAMELLIA-256-CBC:+SHA384 \ |
| +RSA-PSK:+CAMELLIA-128-CBC:+SHA256 \ |
| +PSK:+AES-128-GCM:+AEAD \ |
| +PSK:+AES-256-GCM:+AEAD \ |
| +DHE-PSK:+AES-128-GCM:+AEAD \ |
| +DHE-PSK:+AES-256-GCM:+AEAD \ |
| +RSA-PSK:+CAMELLIA-128-GCM:+AEAD \ |
| +RSA-PSK:+CAMELLIA-256-GCM:+AEAD \ |
| +PSK:+CAMELLIA-128-GCM:+AEAD \ |
| +PSK:+CAMELLIA-256-GCM:+AEAD \ |
| +DHE-PSK:+CAMELLIA-128-GCM:+AEAD \ |
| +DHE-PSK:+CAMELLIA-256-GCM:+AEAD \ |
| +RSA-PSK:+AES-256-GCM:+AEAD \ |
| +RSA-PSK:+AES-128-GCM:+AEAD \ |
| +ECDHE-PSK:+NULL:+SHA384 \ |
| +ECDHE-PSK:+NULL:+SHA256 \ |
| +PSK:+NULL:+SHA256 \ |
| +PSK:+NULL:+SHA384 \ |
| +DHE-PSK:+NULL:+SHA256 \ |
| +DHE-PSK:+NULL:+SHA384 \ |
| +RSA-PSK:+NULL:+SHA256 \ |
| +RSA-PSK:+NULL:+SHA384 \ |
| " |
| fi |
| ;; |
| esac |
| } |
| |
| add_polarssl_ciphersuites() |
| { |
| case $TYPE in |
| |
| "ECDSA") |
| if [ "$MODE" != "ssl3" ]; |
| then |
| P_CIPHERS="$P_CIPHERS \ |
| TLS-ECDH-ECDSA-WITH-CAMELLIA-128-CBC-SHA256 \ |
| TLS-ECDH-ECDSA-WITH-CAMELLIA-256-CBC-SHA384 \ |
| " |
| fi |
| if [ "$MODE" = "tls1_2" ]; |
| then |
| P_CIPHERS="$P_CIPHERS \ |
| TLS-ECDH-ECDSA-WITH-CAMELLIA-128-GCM-SHA256 \ |
| TLS-ECDH-ECDSA-WITH-CAMELLIA-256-GCM-SHA384 \ |
| " |
| fi |
| ;; |
| |
| "RSA") |
| ;; |
| |
| "PSK") |
| P_CIPHERS="$P_CIPHERS \ |
| TLS-PSK-WITH-NULL-SHA \ |
| TLS-DHE-PSK-WITH-RC4-128-SHA \ |
| TLS-DHE-PSK-WITH-NULL-SHA \ |
| TLS-RSA-PSK-WITH-RC4-128-SHA \ |
| " |
| if [ "$MODE" != "ssl3" ]; |
| then |
| P_CIPHERS="$P_CIPHERS \ |
| TLS-ECDHE-PSK-WITH-RC4-128-SHA \ |
| TLS-ECDHE-PSK-WITH-NULL-SHA \ |
| " |
| fi |
| ;; |
| esac |
| } |
| |
| setup_arguments() |
| { |
| case $MODE in |
| "ssl3") |
| G_PRIO_MODE="+VERS-SSL3.0" |
| ;; |
| "tls1") |
| G_PRIO_MODE="+VERS-TLS1.0" |
| ;; |
| "tls1_1") |
| G_PRIO_MODE="+VERS-TLS1.1" |
| ;; |
| "tls1_2") |
| G_PRIO_MODE="+VERS-TLS1.2" |
| ;; |
| *) |
| echo "error: invalid mode: $MODE" >&2 |
| exit 1; |
| esac |
| |
| P_SERVER_ARGS="server_addr=0.0.0.0 force_version=$MODE" |
| O_SERVER_ARGS="-www -cipher NULL,ALL -$MODE" |
| G_SERVER_ARGS="-p 4433 --http" |
| G_SERVER_PRIO="EXPORT:+NULL:+MD5:+PSK:+DHE-PSK:+ECDHE-PSK:+RSA-PSK:-VERS-TLS-ALL:$G_PRIO_MODE" |
| |
| P_CLIENT_ARGS="force_version=$MODE" |
| O_CLIENT_ARGS="-$MODE" |
| G_CLIENT_ARGS="-p 4433 --debug 3" |
| G_CLIENT_PRIO="NONE:$G_PRIO_MODE:+COMP-NULL:+CURVE-ALL:+SIGN-ALL" |
| |
| if [ "X$VERIFY" = "XYES" ]; |
| then |
| P_SERVER_ARGS="$P_SERVER_ARGS ca_file=data_files/test-ca_cat12.crt auth_mode=required" |
| O_SERVER_ARGS="$O_SERVER_ARGS -CAfile data_files/test-ca_cat12.crt -Verify 10" |
| G_SERVER_ARGS="$G_SERVER_ARGS --x509cafile data_files/test-ca_cat12.crt --require-client-cert" |
| |
| P_CLIENT_ARGS="$P_CLIENT_ARGS ca_file=data_files/test-ca_cat12.crt auth_mode=required" |
| O_CLIENT_ARGS="$O_CLIENT_ARGS -CAfile data_files/test-ca_cat12.crt -verify 10" |
| G_CLIENT_ARGS="$G_CLIENT_ARGS --x509cafile data_files/test-ca_cat12.crt" |
| else |
| # don't request a client cert at all |
| P_SERVER_ARGS="$P_SERVER_ARGS ca_file=none auth_mode=none" |
| G_SERVER_ARGS="$G_SERVER_ARGS --disable-client-cert" |
| |
| P_CLIENT_ARGS="$P_CLIENT_ARGS ca_file=none auth_mode=none" |
| O_CLIENT_ARGS="$O_CLIENT_ARGS" |
| G_CLIENT_ARGS="$G_CLIENT_ARGS --insecure" |
| fi |
| |
| case $TYPE in |
| "ECDSA") |
| P_SERVER_ARGS="$P_SERVER_ARGS crt_file=data_files/server5.crt key_file=data_files/server5.key" |
| O_SERVER_ARGS="$O_SERVER_ARGS -cert data_files/server5.crt -key data_files/server5.key" |
| G_SERVER_ARGS="$G_SERVER_ARGS --x509certfile data_files/server5.crt --x509keyfile data_files/server5.key" |
| |
| if [ "X$VERIFY" = "XYES" ]; then |
| P_CLIENT_ARGS="$P_CLIENT_ARGS crt_file=data_files/server6.crt key_file=data_files/server6.key" |
| O_CLIENT_ARGS="$O_CLIENT_ARGS -cert data_files/server6.crt -key data_files/server6.key" |
| G_CLIENT_ARGS="$G_CLIENT_ARGS --x509certfile data_files/server6.crt --x509keyfile data_files/server6.key" |
| else |
| P_CLIENT_ARGS="$P_CLIENT_ARGS crt_file=none key_file=none" |
| fi |
| ;; |
| |
| "RSA") |
| P_SERVER_ARGS="$P_SERVER_ARGS crt_file=data_files/server2.crt key_file=data_files/server2.key" |
| O_SERVER_ARGS="$O_SERVER_ARGS -cert data_files/server2.crt -key data_files/server2.key" |
| G_SERVER_ARGS="$G_SERVER_ARGS --x509certfile data_files/server2.crt --x509keyfile data_files/server2.key" |
| |
| if [ "X$VERIFY" = "XYES" ]; then |
| P_CLIENT_ARGS="$P_CLIENT_ARGS crt_file=data_files/server1.crt key_file=data_files/server1.key" |
| O_CLIENT_ARGS="$O_CLIENT_ARGS -cert data_files/server1.crt -key data_files/server1.key" |
| G_CLIENT_ARGS="$G_CLIENT_ARGS --x509certfile data_files/server1.crt --x509keyfile data_files/server1.key" |
| else |
| P_CLIENT_ARGS="$P_CLIENT_ARGS crt_file=none key_file=none" |
| fi |
| ;; |
| |
| "PSK") |
| # give RSA-PSK-capable server a RSA cert |
| # (should be a separate type, but harder to close with openssl) |
| P_SERVER_ARGS="$P_SERVER_ARGS psk=6162636465666768696a6b6c6d6e6f70 ca_file=none crt_file=data_files/server2.crt key_file=data_files/server2.key" |
| O_SERVER_ARGS="$O_SERVER_ARGS -psk 6162636465666768696a6b6c6d6e6f70 -nocert" |
| G_SERVER_ARGS="$G_SERVER_ARGS --x509certfile data_files/server2.crt --x509keyfile data_files/server2.key --pskpasswd data_files/passwd.psk" |
| |
| P_CLIENT_ARGS="$P_CLIENT_ARGS psk=6162636465666768696a6b6c6d6e6f70 crt_file=none key_file=none" |
| O_CLIENT_ARGS="$O_CLIENT_ARGS -psk 6162636465666768696a6b6c6d6e6f70" |
| G_CLIENT_ARGS="$G_CLIENT_ARGS --pskusername Client_identity --pskkey=6162636465666768696a6b6c6d6e6f70" |
| ;; |
| esac |
| } |
| |
| # is_polar <cmd_line> |
| is_polar() { |
| echo "$1" | grep 'ssl_server2\|ssl_client2' > /dev/null |
| } |
| |
| # has_mem_err <log_file_name> |
| has_mem_err() { |
| if ( grep -F 'All heap blocks were freed -- no leaks are possible' "$1" && |
| grep -F 'ERROR SUMMARY: 0 errors from 0 contexts' "$1" ) > /dev/null |
| then |
| return 1 # false: does not have errors |
| else |
| return 0 # true: has errors |
| fi |
| } |
| |
| # start_server <name> |
| # also saves name and command |
| start_server() { |
| case $1 in |
| [Oo]pen*) |
| SERVER_CMD="$OPENSSL_CMD s_server $O_SERVER_ARGS" |
| ;; |
| [Gg]nu*) |
| SERVER_CMD="$GNUTLS_SERV $G_SERVER_ARGS --priority $G_SERVER_PRIO" |
| ;; |
| [Pp]olar*) |
| SERVER_CMD="$P_SRV $P_SERVER_ARGS" |
| if [ "$MEMCHECK" -gt 0 ]; then |
| SERVER_CMD="valgrind --leak-check=full $SERVER_CMD" |
| fi |
| ;; |
| *) |
| echo "error: invalid server name: $1" >&2 |
| exit 1 |
| ;; |
| esac |
| SERVER_NAME=$1 |
| |
| log "$SERVER_CMD" |
| echo "$SERVER_CMD" > srv_out |
| $SERVER_CMD >> srv_out 2>&1 & |
| PROCESS_ID=$! |
| |
| sleep 1 |
| } |
| |
| # terminate the running server (closing it cleanly if it is ours) |
| stop_server() { |
| case $SERVER_NAME in |
| [Pp]olar*) |
| # we must force a PSK suite when in PSK mode (otherwise client |
| # auth will fail), so try every entry in $P_CIPHERS in turn (in |
| # case the first one is not implemented in this configuration) |
| for i in $P_CIPHERS; do |
| log "$P_CLI $P_CLIENT_ARGS request_page=SERVERQUIT auth_mode=none force_ciphersuite=$i" |
| "$P_CLI" $P_CLIENT_ARGS request_page=SERVERQUIT auth_mode=none \ |
| force_ciphersuite=$i >/dev/null |
| if [ "$?" == 0 ]; then |
| break |
| fi |
| done |
| ;; |
| *) |
| kill $PROCESS_ID 2>/dev/null |
| esac |
| |
| wait $PROCESS_ID 2>/dev/null |
| |
| if [ "$MEMCHECK" -gt 0 ]; then |
| if is_polar "$SERVER_CMD" && has_mem_err srv_out; then |
| echo " ! Server had memory errors" |
| let "srvmem++" |
| return |
| fi |
| fi |
| |
| rm -f srv_out |
| } |
| |
| # kill the running server (used when killed by signal) |
| cleanup() { |
| rm -f srv_out cli_out |
| kill $PROCESS_ID |
| exit 1 |
| } |
| |
| # run_client <name> <cipher> |
| run_client() { |
| # announce what we're going to do |
| let "tests++" |
| VERIF=$(echo $VERIFY | tr '[:upper:]' '[:lower:]') |
| TITLE="${1:0:1}->${SERVER_NAME:0:1} $MODE,$VERIF $2" |
| echo -n "$TITLE " |
| LEN=`echo "$TITLE" | wc -c` |
| LEN=`echo 72 - $LEN | bc` |
| for i in `seq 1 $LEN`; do echo -n '.'; done; echo -n ' ' |
| |
| # run the command and interpret result |
| case $1 in |
| [Oo]pen*) |
| CLIENT_CMD="$OPENSSL_CMD s_client $O_CLIENT_ARGS -cipher $2" |
| log "$CLIENT_CMD" |
| echo "$CLIENT_CMD" > cli_out |
| ( echo -e 'GET HTTP/1.0'; echo; ) | $CLIENT_CMD >> cli_out 2>&1 |
| EXIT=$? |
| |
| if [ "$EXIT" == "0" ]; then |
| RESULT=0 |
| else |
| if grep 'Cipher is (NONE)' cli_out >/dev/null; then |
| RESULT=1 |
| else |
| RESULT=2 |
| fi |
| fi |
| ;; |
| |
| [Gg]nu*) |
| CLIENT_CMD="$GNUTLS_CLI $G_CLIENT_ARGS --priority $G_PRIO_MODE:$2 localhost" |
| log "$CLIENT_CMD" |
| echo "$CLIENT_CMD" > cli_out |
| ( echo -e 'GET HTTP/1.0'; echo; ) | $CLIENT_CMD >> cli_out 2>&1 |
| EXIT=$? |
| |
| if [ "$EXIT" == "0" ]; then |
| RESULT=0 |
| else |
| RESULT=2 |
| # interpret early failure, with a handshake_failure alert |
| # before the server hello, as "no ciphersuite in common" |
| if grep -F 'Received alert [40]: Handshake failed' cli_out; then |
| if grep -i 'SERVER HELLO .* was received' cli_out; then : |
| else |
| RESULT=1 |
| fi |
| fi >/dev/null |
| fi |
| ;; |
| |
| [Pp]olar*) |
| CLIENT_CMD="$P_CLI $P_CLIENT_ARGS force_ciphersuite=$2" |
| if [ "$MEMCHECK" -gt 0 ]; then |
| CLIENT_CMD="valgrind --leak-check=full $CLIENT_CMD" |
| fi |
| log "$CLIENT_CMD" |
| echo "$CLIENT_CMD" > cli_out |
| $CLIENT_CMD >> cli_out 2>&1 |
| EXIT=$? |
| |
| case $EXIT in |
| "0") RESULT=0 ;; |
| "2") RESULT=1 ;; |
| *) RESULT=2 ;; |
| esac |
| |
| if [ "$MEMCHECK" -gt 0 ]; then |
| if is_polar "$CLIENT_CMD" && has_mem_err cli_out; then |
| RESULT=2 |
| fi |
| fi |
| |
| ;; |
| |
| *) |
| echo "error: invalid client name: $1" >&2 |
| exit 1 |
| ;; |
| esac |
| |
| echo "EXIT: $EXIT" >> cli_out |
| |
| # report and count result |
| case $RESULT in |
| "0") |
| echo PASS |
| ;; |
| "1") |
| echo SKIP |
| let "skipped++" |
| ;; |
| "2") |
| echo FAIL |
| cp srv_out c-srv-${tests}.log |
| cp cli_out c-cli-${tests}.log |
| echo " ! outputs saved to c-srv-${tests}.log, c-cli-${tests}.log" |
| let "failed++" |
| ;; |
| esac |
| |
| rm -f cli_out |
| } |
| |
| # |
| # MAIN |
| # |
| |
| get_options "$@" |
| |
| # sanity checks, avoid an avalanche of errors |
| if [ ! -x "$P_SRV" ]; then |
| echo "Command '$P_SRV' is not an executable file" >&2 |
| exit 1 |
| fi |
| if [ ! -x "$P_CLI" ]; then |
| echo "Command '$P_CLI' is not an executable file" >&2 |
| exit 1 |
| fi |
| |
| if echo "$PEERS" | grep -i openssl > /dev/null; then |
| if which "$OPENSSL_CMD" >/dev/null 2>&1; then :; else |
| echo "Command '$OPENSSL_CMD' not found" >&2 |
| exit 1 |
| fi |
| fi |
| |
| if echo "$PEERS" | grep -i gnutls > /dev/null; then |
| for CMD in "$GNUTLS_CLI" "$GNUTLS_SERV"; do |
| if which "$CMD" >/dev/null 2>&1; then :; else |
| echo "Command '$CMD' not found" >&2 |
| exit 1 |
| fi |
| done |
| fi |
| |
| for PEER in $PEERS; do |
| case "$PEER" in |
| [Pp]olar*|[Oo]pen*|[Gg]nu*) |
| ;; |
| *) |
| echo "Unknown peers: $PEER" >&2 |
| exit 1 |
| esac |
| done |
| |
| killall -q gnutls-serv openssl ssl_server ssl_server2 |
| trap cleanup INT TERM HUP |
| |
| for VERIFY in $VERIFIES; do |
| for MODE in $MODES; do |
| for TYPE in $TYPES; do |
| for PEER in $PEERS; do |
| |
| setup_arguments |
| |
| case "$PEER" in |
| |
| [Oo]pen*) |
| |
| reset_ciphersuites |
| add_common_ciphersuites |
| add_openssl_ciphersuites |
| filter_ciphersuites |
| |
| if [ "X" != "X$P_CIPHERS" ]; then |
| start_server "OpenSSL" |
| for i in $P_CIPHERS; do |
| run_client PolarSSL $i |
| done |
| stop_server |
| fi |
| |
| if [ "X" != "X$O_CIPHERS" ]; then |
| start_server "PolarSSL" |
| for i in $O_CIPHERS; do |
| run_client OpenSSL $i |
| done |
| stop_server |
| fi |
| |
| ;; |
| |
| [Gg]nu*) |
| |
| reset_ciphersuites |
| add_common_ciphersuites |
| add_gnutls_ciphersuites |
| filter_ciphersuites |
| |
| if [ "X" != "X$P_CIPHERS" ]; then |
| start_server "GnuTLS" |
| for i in $P_CIPHERS; do |
| run_client PolarSSL $i |
| done |
| stop_server |
| fi |
| |
| if [ "X" != "X$G_CIPHERS" ]; then |
| start_server "PolarSSL" |
| for i in $G_CIPHERS; do |
| run_client GnuTLS $i |
| done |
| stop_server |
| fi |
| |
| ;; |
| |
| [Pp]olar*) |
| |
| reset_ciphersuites |
| add_common_ciphersuites |
| add_openssl_ciphersuites |
| add_gnutls_ciphersuites |
| add_polarssl_ciphersuites |
| filter_ciphersuites |
| |
| if [ "X" != "X$P_CIPHERS" ]; then |
| start_server "PolarSSL" |
| for i in $P_CIPHERS; do |
| run_client PolarSSL $i |
| done |
| stop_server |
| fi |
| |
| ;; |
| |
| *) |
| echo "Unkown peer: $PEER" >&2 |
| exit 1 |
| ;; |
| |
| esac |
| |
| done |
| done |
| done |
| done |
| |
| echo "------------------------------------------------------------------------" |
| |
| if (( failed != 0 && srvmem != 0 )); |
| then |
| echo -n "FAILED" |
| else |
| echo -n "PASSED" |
| fi |
| |
| if [ "$MEMCHECK" -gt 0 ]; then |
| MEMREPORT=", $srvmem server memory errors" |
| else |
| MEMREPORT="" |
| fi |
| |
| let "passed = tests - failed" |
| echo " ($passed / $tests tests ($skipped skipped$MEMREPORT))" |
| |
| let "failed += srvmem" |
| exit $failed |