| /* |
| * SSLv3/TLSv1 shared functions |
| * |
| * Copyright (C) 2006-2014, Brainspark B.V. |
| * |
| * This file is part of PolarSSL (http://www.polarssl.org) |
| * Lead Maintainer: Paul Bakker <polarssl_maintainer at polarssl.org> |
| * |
| * All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. |
| */ |
| /* |
| * The SSL 3.0 specification was drafted by Netscape in 1996, |
| * and became an IETF standard in 1999. |
| * |
| * http://wp.netscape.com/eng/ssl3/ |
| * http://www.ietf.org/rfc/rfc2246.txt |
| * http://www.ietf.org/rfc/rfc4346.txt |
| */ |
| |
| #if !defined(POLARSSL_CONFIG_FILE) |
| #include "polarssl/config.h" |
| #else |
| #include POLARSSL_CONFIG_FILE |
| #endif |
| |
| #if defined(POLARSSL_SSL_TLS_C) |
| |
| #include "polarssl/debug.h" |
| #include "polarssl/ssl.h" |
| |
| #if defined(POLARSSL_X509_CRT_PARSE_C) && \ |
| defined(POLARSSL_X509_CHECK_EXTENDED_KEY_USAGE) |
| #include "polarssl/oid.h" |
| #endif |
| |
| #if defined(POLARSSL_PLATFORM_C) |
| #include "polarssl/platform.h" |
| #else |
| #define polarssl_malloc malloc |
| #define polarssl_free free |
| #endif |
| |
| #include <stdlib.h> |
| |
| #if defined(_MSC_VER) && !defined strcasecmp && !defined(EFIX64) && \ |
| !defined(EFI32) |
| #define strcasecmp _stricmp |
| #endif |
| |
| #if defined(POLARSSL_SSL_MAX_FRAGMENT_LENGTH) |
| /* |
| * Convert max_fragment_length codes to length. |
| * RFC 6066 says: |
| * enum{ |
| * 2^9(1), 2^10(2), 2^11(3), 2^12(4), (255) |
| * } MaxFragmentLength; |
| * and we add 0 -> extension unused |
| */ |
| static unsigned int mfl_code_to_length[SSL_MAX_FRAG_LEN_INVALID] = |
| { |
| SSL_MAX_CONTENT_LEN, /* SSL_MAX_FRAG_LEN_NONE */ |
| 512, /* SSL_MAX_FRAG_LEN_512 */ |
| 1024, /* SSL_MAX_FRAG_LEN_1024 */ |
| 2048, /* SSL_MAX_FRAG_LEN_2048 */ |
| 4096, /* SSL_MAX_FRAG_LEN_4096 */ |
| }; |
| #endif /* POLARSSL_SSL_MAX_FRAGMENT_LENGTH */ |
| |
| static int ssl_session_copy( ssl_session *dst, const ssl_session *src ) |
| { |
| ssl_session_free( dst ); |
| memcpy( dst, src, sizeof( ssl_session ) ); |
| |
| #if defined(POLARSSL_X509_CRT_PARSE_C) |
| if( src->peer_cert != NULL ) |
| { |
| int ret; |
| |
| dst->peer_cert = (x509_crt *) polarssl_malloc( sizeof(x509_crt) ); |
| if( dst->peer_cert == NULL ) |
| return( POLARSSL_ERR_SSL_MALLOC_FAILED ); |
| |
| x509_crt_init( dst->peer_cert ); |
| |
| if( ( ret = x509_crt_parse( dst->peer_cert, src->peer_cert->raw.p, |
| src->peer_cert->raw.len ) != 0 ) ) |
| { |
| polarssl_free( dst->peer_cert ); |
| dst->peer_cert = NULL; |
| return( ret ); |
| } |
| } |
| #endif /* POLARSSL_X509_CRT_PARSE_C */ |
| |
| #if defined(POLARSSL_SSL_SESSION_TICKETS) |
| if( src->ticket != NULL ) |
| { |
| dst->ticket = (unsigned char *) polarssl_malloc( src->ticket_len ); |
| if( dst->ticket == NULL ) |
| return( POLARSSL_ERR_SSL_MALLOC_FAILED ); |
| |
| memcpy( dst->ticket, src->ticket, src->ticket_len ); |
| } |
| #endif /* POLARSSL_SSL_SESSION_TICKETS */ |
| |
| return( 0 ); |
| } |
| |
| #if defined(POLARSSL_SSL_HW_RECORD_ACCEL) |
| int (*ssl_hw_record_init)(ssl_context *ssl, |
| const unsigned char *key_enc, const unsigned char *key_dec, |
| size_t keylen, |
| const unsigned char *iv_enc, const unsigned char *iv_dec, |
| size_t ivlen, |
| const unsigned char *mac_enc, const unsigned char *mac_dec, |
| size_t maclen) = NULL; |
| int (*ssl_hw_record_activate)(ssl_context *ssl, int direction) = NULL; |
| int (*ssl_hw_record_reset)(ssl_context *ssl) = NULL; |
| int (*ssl_hw_record_write)(ssl_context *ssl) = NULL; |
| int (*ssl_hw_record_read)(ssl_context *ssl) = NULL; |
| int (*ssl_hw_record_finish)(ssl_context *ssl) = NULL; |
| #endif /* POLARSSL_SSL_HW_RECORD_ACCEL */ |
| |
| /* |
| * Key material generation |
| */ |
| #if defined(POLARSSL_SSL_PROTO_SSL3) |
| static int ssl3_prf( const unsigned char *secret, size_t slen, |
| const char *label, |
| const unsigned char *random, size_t rlen, |
| unsigned char *dstbuf, size_t dlen ) |
| { |
| size_t i; |
| md5_context md5; |
| sha1_context sha1; |
| unsigned char padding[16]; |
| unsigned char sha1sum[20]; |
| ((void)label); |
| |
| /* |
| * SSLv3: |
| * block = |
| * MD5( secret + SHA1( 'A' + secret + random ) ) + |
| * MD5( secret + SHA1( 'BB' + secret + random ) ) + |
| * MD5( secret + SHA1( 'CCC' + secret + random ) ) + |
| * ... |
| */ |
| for( i = 0; i < dlen / 16; i++ ) |
| { |
| memset( padding, (unsigned char) ('A' + i), 1 + i ); |
| |
| sha1_starts( &sha1 ); |
| sha1_update( &sha1, padding, 1 + i ); |
| sha1_update( &sha1, secret, slen ); |
| sha1_update( &sha1, random, rlen ); |
| sha1_finish( &sha1, sha1sum ); |
| |
| md5_starts( &md5 ); |
| md5_update( &md5, secret, slen ); |
| md5_update( &md5, sha1sum, 20 ); |
| md5_finish( &md5, dstbuf + i * 16 ); |
| } |
| |
| memset( &md5, 0, sizeof( md5 ) ); |
| memset( &sha1, 0, sizeof( sha1 ) ); |
| |
| memset( padding, 0, sizeof( padding ) ); |
| memset( sha1sum, 0, sizeof( sha1sum ) ); |
| |
| return( 0 ); |
| } |
| #endif /* POLARSSL_SSL_PROTO_SSL3 */ |
| |
| #if defined(POLARSSL_SSL_PROTO_TLS1) || defined(POLARSSL_SSL_PROTO_TLS1_1) |
| static int tls1_prf( const unsigned char *secret, size_t slen, |
| const char *label, |
| const unsigned char *random, size_t rlen, |
| unsigned char *dstbuf, size_t dlen ) |
| { |
| size_t nb, hs; |
| size_t i, j, k; |
| const unsigned char *S1, *S2; |
| unsigned char tmp[128]; |
| unsigned char h_i[20]; |
| |
| if( sizeof( tmp ) < 20 + strlen( label ) + rlen ) |
| return( POLARSSL_ERR_SSL_BAD_INPUT_DATA ); |
| |
| hs = ( slen + 1 ) / 2; |
| S1 = secret; |
| S2 = secret + slen - hs; |
| |
| nb = strlen( label ); |
| memcpy( tmp + 20, label, nb ); |
| memcpy( tmp + 20 + nb, random, rlen ); |
| nb += rlen; |
| |
| /* |
| * First compute P_md5(secret,label+random)[0..dlen] |
| */ |
| md5_hmac( S1, hs, tmp + 20, nb, 4 + tmp ); |
| |
| for( i = 0; i < dlen; i += 16 ) |
| { |
| md5_hmac( S1, hs, 4 + tmp, 16 + nb, h_i ); |
| md5_hmac( S1, hs, 4 + tmp, 16, 4 + tmp ); |
| |
| k = ( i + 16 > dlen ) ? dlen % 16 : 16; |
| |
| for( j = 0; j < k; j++ ) |
| dstbuf[i + j] = h_i[j]; |
| } |
| |
| /* |
| * XOR out with P_sha1(secret,label+random)[0..dlen] |
| */ |
| sha1_hmac( S2, hs, tmp + 20, nb, tmp ); |
| |
| for( i = 0; i < dlen; i += 20 ) |
| { |
| sha1_hmac( S2, hs, tmp, 20 + nb, h_i ); |
| sha1_hmac( S2, hs, tmp, 20, tmp ); |
| |
| k = ( i + 20 > dlen ) ? dlen % 20 : 20; |
| |
| for( j = 0; j < k; j++ ) |
| dstbuf[i + j] = (unsigned char)( dstbuf[i + j] ^ h_i[j] ); |
| } |
| |
| memset( tmp, 0, sizeof( tmp ) ); |
| memset( h_i, 0, sizeof( h_i ) ); |
| |
| return( 0 ); |
| } |
| #endif /* POLARSSL_SSL_PROTO_TLS1) || POLARSSL_SSL_PROTO_TLS1_1 */ |
| |
| #if defined(POLARSSL_SSL_PROTO_TLS1_2) |
| #if defined(POLARSSL_SHA256_C) |
| static int tls_prf_sha256( const unsigned char *secret, size_t slen, |
| const char *label, |
| const unsigned char *random, size_t rlen, |
| unsigned char *dstbuf, size_t dlen ) |
| { |
| size_t nb; |
| size_t i, j, k; |
| unsigned char tmp[128]; |
| unsigned char h_i[32]; |
| |
| if( sizeof( tmp ) < 32 + strlen( label ) + rlen ) |
| return( POLARSSL_ERR_SSL_BAD_INPUT_DATA ); |
| |
| nb = strlen( label ); |
| memcpy( tmp + 32, label, nb ); |
| memcpy( tmp + 32 + nb, random, rlen ); |
| nb += rlen; |
| |
| /* |
| * Compute P_<hash>(secret, label + random)[0..dlen] |
| */ |
| sha256_hmac( secret, slen, tmp + 32, nb, tmp, 0 ); |
| |
| for( i = 0; i < dlen; i += 32 ) |
| { |
| sha256_hmac( secret, slen, tmp, 32 + nb, h_i, 0 ); |
| sha256_hmac( secret, slen, tmp, 32, tmp, 0 ); |
| |
| k = ( i + 32 > dlen ) ? dlen % 32 : 32; |
| |
| for( j = 0; j < k; j++ ) |
| dstbuf[i + j] = h_i[j]; |
| } |
| |
| memset( tmp, 0, sizeof( tmp ) ); |
| memset( h_i, 0, sizeof( h_i ) ); |
| |
| return( 0 ); |
| } |
| #endif /* POLARSSL_SHA256_C */ |
| |
| #if defined(POLARSSL_SHA512_C) |
| static int tls_prf_sha384( const unsigned char *secret, size_t slen, |
| const char *label, |
| const unsigned char *random, size_t rlen, |
| unsigned char *dstbuf, size_t dlen ) |
| { |
| size_t nb; |
| size_t i, j, k; |
| unsigned char tmp[128]; |
| unsigned char h_i[48]; |
| |
| if( sizeof( tmp ) < 48 + strlen( label ) + rlen ) |
| return( POLARSSL_ERR_SSL_BAD_INPUT_DATA ); |
| |
| nb = strlen( label ); |
| memcpy( tmp + 48, label, nb ); |
| memcpy( tmp + 48 + nb, random, rlen ); |
| nb += rlen; |
| |
| /* |
| * Compute P_<hash>(secret, label + random)[0..dlen] |
| */ |
| sha512_hmac( secret, slen, tmp + 48, nb, tmp, 1 ); |
| |
| for( i = 0; i < dlen; i += 48 ) |
| { |
| sha512_hmac( secret, slen, tmp, 48 + nb, h_i, 1 ); |
| sha512_hmac( secret, slen, tmp, 48, tmp, 1 ); |
| |
| k = ( i + 48 > dlen ) ? dlen % 48 : 48; |
| |
| for( j = 0; j < k; j++ ) |
| dstbuf[i + j] = h_i[j]; |
| } |
| |
| memset( tmp, 0, sizeof( tmp ) ); |
| memset( h_i, 0, sizeof( h_i ) ); |
| |
| return( 0 ); |
| } |
| #endif /* POLARSSL_SHA512_C */ |
| #endif /* POLARSSL_SSL_PROTO_TLS1_2 */ |
| |
| static void ssl_update_checksum_start(ssl_context *, const unsigned char *, size_t); |
| |
| #if defined(POLARSSL_SSL_PROTO_SSL3) || defined(POLARSSL_SSL_PROTO_TLS1) || \ |
| defined(POLARSSL_SSL_PROTO_TLS1_1) |
| static void ssl_update_checksum_md5sha1(ssl_context *, const unsigned char *, size_t); |
| #endif |
| |
| #if defined(POLARSSL_SSL_PROTO_SSL3) |
| static void ssl_calc_verify_ssl(ssl_context *,unsigned char *); |
| static void ssl_calc_finished_ssl(ssl_context *,unsigned char *,int); |
| #endif |
| |
| #if defined(POLARSSL_SSL_PROTO_TLS1) || defined(POLARSSL_SSL_PROTO_TLS1_1) |
| static void ssl_calc_verify_tls(ssl_context *,unsigned char *); |
| static void ssl_calc_finished_tls(ssl_context *,unsigned char *,int); |
| #endif |
| |
| #if defined(POLARSSL_SSL_PROTO_TLS1_2) |
| #if defined(POLARSSL_SHA256_C) |
| static void ssl_update_checksum_sha256(ssl_context *, const unsigned char *, size_t); |
| static void ssl_calc_verify_tls_sha256(ssl_context *,unsigned char *); |
| static void ssl_calc_finished_tls_sha256(ssl_context *,unsigned char *,int); |
| #endif |
| |
| #if defined(POLARSSL_SHA512_C) |
| static void ssl_update_checksum_sha384(ssl_context *, const unsigned char *, size_t); |
| static void ssl_calc_verify_tls_sha384(ssl_context *,unsigned char *); |
| static void ssl_calc_finished_tls_sha384(ssl_context *,unsigned char *,int); |
| #endif |
| #endif /* POLARSSL_SSL_PROTO_TLS1_2 */ |
| |
| int ssl_derive_keys( ssl_context *ssl ) |
| { |
| int ret = 0; |
| unsigned char tmp[64]; |
| unsigned char keyblk[256]; |
| unsigned char *key1; |
| unsigned char *key2; |
| unsigned char *mac_enc; |
| unsigned char *mac_dec; |
| size_t iv_copy_len; |
| const cipher_info_t *cipher_info; |
| const md_info_t *md_info; |
| |
| ssl_session *session = ssl->session_negotiate; |
| ssl_transform *transform = ssl->transform_negotiate; |
| ssl_handshake_params *handshake = ssl->handshake; |
| |
| SSL_DEBUG_MSG( 2, ( "=> derive keys" ) ); |
| |
| cipher_info = cipher_info_from_type( transform->ciphersuite_info->cipher ); |
| if( cipher_info == NULL ) |
| { |
| SSL_DEBUG_MSG( 1, ( "cipher info for %d not found", |
| transform->ciphersuite_info->cipher ) ); |
| return( POLARSSL_ERR_SSL_BAD_INPUT_DATA ); |
| } |
| |
| md_info = md_info_from_type( transform->ciphersuite_info->mac ); |
| if( md_info == NULL ) |
| { |
| SSL_DEBUG_MSG( 1, ( "md info for %d not found", |
| transform->ciphersuite_info->mac ) ); |
| return( POLARSSL_ERR_SSL_BAD_INPUT_DATA ); |
| } |
| |
| /* |
| * Set appropriate PRF function and other SSL / TLS / TLS1.2 functions |
| */ |
| #if defined(POLARSSL_SSL_PROTO_SSL3) |
| if( ssl->minor_ver == SSL_MINOR_VERSION_0 ) |
| { |
| handshake->tls_prf = ssl3_prf; |
| handshake->calc_verify = ssl_calc_verify_ssl; |
| handshake->calc_finished = ssl_calc_finished_ssl; |
| } |
| else |
| #endif |
| #if defined(POLARSSL_SSL_PROTO_TLS1) || defined(POLARSSL_SSL_PROTO_TLS1_1) |
| if( ssl->minor_ver < SSL_MINOR_VERSION_3 ) |
| { |
| handshake->tls_prf = tls1_prf; |
| handshake->calc_verify = ssl_calc_verify_tls; |
| handshake->calc_finished = ssl_calc_finished_tls; |
| } |
| else |
| #endif |
| #if defined(POLARSSL_SSL_PROTO_TLS1_2) |
| #if defined(POLARSSL_SHA512_C) |
| if( ssl->minor_ver == SSL_MINOR_VERSION_3 && |
| transform->ciphersuite_info->mac == POLARSSL_MD_SHA384 ) |
| { |
| handshake->tls_prf = tls_prf_sha384; |
| handshake->calc_verify = ssl_calc_verify_tls_sha384; |
| handshake->calc_finished = ssl_calc_finished_tls_sha384; |
| } |
| else |
| #endif |
| #if defined(POLARSSL_SHA256_C) |
| if( ssl->minor_ver == SSL_MINOR_VERSION_3 ) |
| { |
| handshake->tls_prf = tls_prf_sha256; |
| handshake->calc_verify = ssl_calc_verify_tls_sha256; |
| handshake->calc_finished = ssl_calc_finished_tls_sha256; |
| } |
| else |
| #endif |
| #endif /* POLARSSL_SSL_PROTO_TLS1_2 */ |
| { |
| SSL_DEBUG_MSG( 1, ( "should never happen" ) ); |
| return( POLARSSL_ERR_SSL_INTERNAL_ERROR ); |
| } |
| |
| /* |
| * SSLv3: |
| * master = |
| * MD5( premaster + SHA1( 'A' + premaster + randbytes ) ) + |
| * MD5( premaster + SHA1( 'BB' + premaster + randbytes ) ) + |
| * MD5( premaster + SHA1( 'CCC' + premaster + randbytes ) ) |
| * |
| * TLSv1+: |
| * master = PRF( premaster, "master secret", randbytes )[0..47] |
| */ |
| if( handshake->resume == 0 ) |
| { |
| SSL_DEBUG_BUF( 3, "premaster secret", handshake->premaster, |
| handshake->pmslen ); |
| |
| handshake->tls_prf( handshake->premaster, handshake->pmslen, |
| "master secret", |
| handshake->randbytes, 64, session->master, 48 ); |
| |
| memset( handshake->premaster, 0, sizeof( handshake->premaster ) ); |
| } |
| else |
| SSL_DEBUG_MSG( 3, ( "no premaster (session resumed)" ) ); |
| |
| /* |
| * Swap the client and server random values. |
| */ |
| memcpy( tmp, handshake->randbytes, 64 ); |
| memcpy( handshake->randbytes, tmp + 32, 32 ); |
| memcpy( handshake->randbytes + 32, tmp, 32 ); |
| memset( tmp, 0, sizeof( tmp ) ); |
| |
| /* |
| * SSLv3: |
| * key block = |
| * MD5( master + SHA1( 'A' + master + randbytes ) ) + |
| * MD5( master + SHA1( 'BB' + master + randbytes ) ) + |
| * MD5( master + SHA1( 'CCC' + master + randbytes ) ) + |
| * MD5( master + SHA1( 'DDDD' + master + randbytes ) ) + |
| * ... |
| * |
| * TLSv1: |
| * key block = PRF( master, "key expansion", randbytes ) |
| */ |
| handshake->tls_prf( session->master, 48, "key expansion", |
| handshake->randbytes, 64, keyblk, 256 ); |
| |
| SSL_DEBUG_MSG( 3, ( "ciphersuite = %s", |
| ssl_get_ciphersuite_name( session->ciphersuite ) ) ); |
| SSL_DEBUG_BUF( 3, "master secret", session->master, 48 ); |
| SSL_DEBUG_BUF( 4, "random bytes", handshake->randbytes, 64 ); |
| SSL_DEBUG_BUF( 4, "key block", keyblk, 256 ); |
| |
| memset( handshake->randbytes, 0, sizeof( handshake->randbytes ) ); |
| |
| /* |
| * Determine the appropriate key, IV and MAC length. |
| */ |
| |
| if( cipher_info->mode == POLARSSL_MODE_GCM ) |
| { |
| transform->keylen = cipher_info->key_length; |
| transform->keylen /= 8; |
| transform->minlen = 1; |
| transform->ivlen = 12; |
| transform->fixed_ivlen = 4; |
| transform->maclen = 0; |
| } |
| else |
| { |
| if( md_info->type != POLARSSL_MD_NONE ) |
| { |
| int ret; |
| |
| if( ( ret = md_init_ctx( &transform->md_ctx_enc, md_info ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "md_init_ctx", ret ); |
| return( ret ); |
| } |
| |
| if( ( ret = md_init_ctx( &transform->md_ctx_dec, md_info ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "md_init_ctx", ret ); |
| return( ret ); |
| } |
| |
| transform->maclen = md_get_size( md_info ); |
| |
| #if defined(POLARSSL_SSL_TRUNCATED_HMAC) |
| /* |
| * If HMAC is to be truncated, we shall keep the leftmost bytes, |
| * (rfc 6066 page 13 or rfc 2104 section 4), |
| * so we only need to adjust the length here. |
| */ |
| if( session->trunc_hmac == SSL_TRUNC_HMAC_ENABLED ) |
| transform->maclen = SSL_TRUNCATED_HMAC_LEN; |
| #endif /* POLARSSL_SSL_TRUNCATED_HMAC */ |
| } |
| |
| transform->keylen = cipher_info->key_length; |
| transform->keylen /= 8; |
| transform->ivlen = cipher_info->iv_size; |
| |
| transform->minlen = transform->keylen; |
| if( transform->minlen < transform->maclen ) |
| { |
| if( cipher_info->mode == POLARSSL_MODE_STREAM ) |
| transform->minlen = transform->maclen; |
| else |
| transform->minlen += transform->keylen; |
| } |
| } |
| |
| SSL_DEBUG_MSG( 3, ( "keylen: %d, minlen: %d, ivlen: %d, maclen: %d", |
| transform->keylen, transform->minlen, transform->ivlen, |
| transform->maclen ) ); |
| |
| /* |
| * Finally setup the cipher contexts, IVs and MAC secrets. |
| */ |
| if( ssl->endpoint == SSL_IS_CLIENT ) |
| { |
| key1 = keyblk + transform->maclen * 2; |
| key2 = keyblk + transform->maclen * 2 + transform->keylen; |
| |
| mac_enc = keyblk; |
| mac_dec = keyblk + transform->maclen; |
| |
| /* |
| * This is not used in TLS v1.1. |
| */ |
| iv_copy_len = ( transform->fixed_ivlen ) ? |
| transform->fixed_ivlen : transform->ivlen; |
| memcpy( transform->iv_enc, key2 + transform->keylen, iv_copy_len ); |
| memcpy( transform->iv_dec, key2 + transform->keylen + iv_copy_len, |
| iv_copy_len ); |
| } |
| else |
| { |
| key1 = keyblk + transform->maclen * 2 + transform->keylen; |
| key2 = keyblk + transform->maclen * 2; |
| |
| mac_enc = keyblk + transform->maclen; |
| mac_dec = keyblk; |
| |
| /* |
| * This is not used in TLS v1.1. |
| */ |
| iv_copy_len = ( transform->fixed_ivlen ) ? |
| transform->fixed_ivlen : transform->ivlen; |
| memcpy( transform->iv_dec, key1 + transform->keylen, iv_copy_len ); |
| memcpy( transform->iv_enc, key1 + transform->keylen + iv_copy_len, |
| iv_copy_len ); |
| } |
| |
| #if defined(POLARSSL_SSL_PROTO_SSL3) |
| if( ssl->minor_ver == SSL_MINOR_VERSION_0 ) |
| { |
| if( transform->maclen > sizeof transform->mac_enc ) |
| { |
| SSL_DEBUG_MSG( 1, ( "should never happen" ) ); |
| return( POLARSSL_ERR_SSL_INTERNAL_ERROR ); |
| } |
| |
| memcpy( transform->mac_enc, mac_enc, transform->maclen ); |
| memcpy( transform->mac_dec, mac_dec, transform->maclen ); |
| } |
| else |
| #endif /* POLARSSL_SSL_PROTO_SSL3 */ |
| #if defined(POLARSSL_SSL_PROTO_TLS1) || defined(POLARSSL_SSL_PROTO_TLS1_1) || \ |
| defined(POLARSSL_SSL_PROTO_TLS1_2) |
| if( ssl->minor_ver >= SSL_MINOR_VERSION_1 ) |
| { |
| md_hmac_starts( &transform->md_ctx_enc, mac_enc, transform->maclen ); |
| md_hmac_starts( &transform->md_ctx_dec, mac_dec, transform->maclen ); |
| } |
| else |
| #endif |
| { |
| SSL_DEBUG_MSG( 1, ( "should never happen" ) ); |
| return( POLARSSL_ERR_SSL_INTERNAL_ERROR ); |
| } |
| |
| #if defined(POLARSSL_SSL_HW_RECORD_ACCEL) |
| if( ssl_hw_record_init != NULL) |
| { |
| int ret = 0; |
| |
| SSL_DEBUG_MSG( 2, ( "going for ssl_hw_record_init()" ) ); |
| |
| if( ( ret = ssl_hw_record_init( ssl, key1, key2, transform->keylen, |
| transform->iv_enc, transform->iv_dec, |
| iv_copy_len, |
| mac_enc, mac_dec, |
| transform->maclen ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "ssl_hw_record_init", ret ); |
| return POLARSSL_ERR_SSL_HW_ACCEL_FAILED; |
| } |
| } |
| #endif /* POLARSSL_SSL_HW_RECORD_ACCEL */ |
| |
| if( ( ret = cipher_init_ctx( &transform->cipher_ctx_enc, |
| cipher_info ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "cipher_init_ctx", ret ); |
| return( ret ); |
| } |
| |
| if( ( ret = cipher_init_ctx( &transform->cipher_ctx_dec, |
| cipher_info ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "cipher_init_ctx", ret ); |
| return( ret ); |
| } |
| |
| if( ( ret = cipher_setkey( &transform->cipher_ctx_enc, key1, |
| cipher_info->key_length, |
| POLARSSL_ENCRYPT ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "cipher_setkey", ret ); |
| return( ret ); |
| } |
| |
| if( ( ret = cipher_setkey( &transform->cipher_ctx_dec, key2, |
| cipher_info->key_length, |
| POLARSSL_DECRYPT ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "cipher_setkey", ret ); |
| return( ret ); |
| } |
| |
| #if defined(POLARSSL_CIPHER_MODE_CBC) |
| if( cipher_info->mode == POLARSSL_MODE_CBC ) |
| { |
| if( ( ret = cipher_set_padding_mode( &transform->cipher_ctx_enc, |
| POLARSSL_PADDING_NONE ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "cipher_set_padding_mode", ret ); |
| return( ret ); |
| } |
| |
| if( ( ret = cipher_set_padding_mode( &transform->cipher_ctx_dec, |
| POLARSSL_PADDING_NONE ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "cipher_set_padding_mode", ret ); |
| return( ret ); |
| } |
| } |
| #endif /* POLARSSL_CIPHER_MODE_CBC */ |
| |
| memset( keyblk, 0, sizeof( keyblk ) ); |
| |
| #if defined(POLARSSL_ZLIB_SUPPORT) |
| // Initialize compression |
| // |
| if( session->compression == SSL_COMPRESS_DEFLATE ) |
| { |
| if( ssl->compress_buf == NULL ) |
| { |
| SSL_DEBUG_MSG( 3, ( "Allocating compression buffer" ) ); |
| ssl->compress_buf = polarssl_malloc( SSL_BUFFER_LEN ); |
| if( ssl->compress_buf == NULL ) |
| { |
| SSL_DEBUG_MSG( 1, ( "malloc(%d bytes) failed", |
| SSL_BUFFER_LEN ) ); |
| return( POLARSSL_ERR_SSL_MALLOC_FAILED ); |
| } |
| } |
| |
| SSL_DEBUG_MSG( 3, ( "Initializing zlib states" ) ); |
| |
| memset( &transform->ctx_deflate, 0, sizeof( transform->ctx_deflate ) ); |
| memset( &transform->ctx_inflate, 0, sizeof( transform->ctx_inflate ) ); |
| |
| if( deflateInit( &transform->ctx_deflate, |
| Z_DEFAULT_COMPRESSION ) != Z_OK || |
| inflateInit( &transform->ctx_inflate ) != Z_OK ) |
| { |
| SSL_DEBUG_MSG( 1, ( "Failed to initialize compression" ) ); |
| return( POLARSSL_ERR_SSL_COMPRESSION_FAILED ); |
| } |
| } |
| #endif /* POLARSSL_ZLIB_SUPPORT */ |
| |
| SSL_DEBUG_MSG( 2, ( "<= derive keys" ) ); |
| |
| return( 0 ); |
| } |
| |
| #if defined(POLARSSL_SSL_PROTO_SSL3) |
| void ssl_calc_verify_ssl( ssl_context *ssl, unsigned char hash[36] ) |
| { |
| md5_context md5; |
| sha1_context sha1; |
| unsigned char pad_1[48]; |
| unsigned char pad_2[48]; |
| |
| SSL_DEBUG_MSG( 2, ( "=> calc verify ssl" ) ); |
| |
| memcpy( &md5 , &ssl->handshake->fin_md5 , sizeof(md5_context) ); |
| memcpy( &sha1, &ssl->handshake->fin_sha1, sizeof(sha1_context) ); |
| |
| memset( pad_1, 0x36, 48 ); |
| memset( pad_2, 0x5C, 48 ); |
| |
| md5_update( &md5, ssl->session_negotiate->master, 48 ); |
| md5_update( &md5, pad_1, 48 ); |
| md5_finish( &md5, hash ); |
| |
| md5_starts( &md5 ); |
| md5_update( &md5, ssl->session_negotiate->master, 48 ); |
| md5_update( &md5, pad_2, 48 ); |
| md5_update( &md5, hash, 16 ); |
| md5_finish( &md5, hash ); |
| |
| sha1_update( &sha1, ssl->session_negotiate->master, 48 ); |
| sha1_update( &sha1, pad_1, 40 ); |
| sha1_finish( &sha1, hash + 16 ); |
| |
| sha1_starts( &sha1 ); |
| sha1_update( &sha1, ssl->session_negotiate->master, 48 ); |
| sha1_update( &sha1, pad_2, 40 ); |
| sha1_update( &sha1, hash + 16, 20 ); |
| sha1_finish( &sha1, hash + 16 ); |
| |
| SSL_DEBUG_BUF( 3, "calculated verify result", hash, 36 ); |
| SSL_DEBUG_MSG( 2, ( "<= calc verify" ) ); |
| |
| return; |
| } |
| #endif /* POLARSSL_SSL_PROTO_SSL3 */ |
| |
| #if defined(POLARSSL_SSL_PROTO_TLS1) || defined(POLARSSL_SSL_PROTO_TLS1_1) |
| void ssl_calc_verify_tls( ssl_context *ssl, unsigned char hash[36] ) |
| { |
| md5_context md5; |
| sha1_context sha1; |
| |
| SSL_DEBUG_MSG( 2, ( "=> calc verify tls" ) ); |
| |
| memcpy( &md5 , &ssl->handshake->fin_md5 , sizeof(md5_context) ); |
| memcpy( &sha1, &ssl->handshake->fin_sha1, sizeof(sha1_context) ); |
| |
| md5_finish( &md5, hash ); |
| sha1_finish( &sha1, hash + 16 ); |
| |
| SSL_DEBUG_BUF( 3, "calculated verify result", hash, 36 ); |
| SSL_DEBUG_MSG( 2, ( "<= calc verify" ) ); |
| |
| return; |
| } |
| #endif /* POLARSSL_SSL_PROTO_TLS1 || POLARSSL_SSL_PROTO_TLS1_1 */ |
| |
| #if defined(POLARSSL_SSL_PROTO_TLS1_2) |
| #if defined(POLARSSL_SHA256_C) |
| void ssl_calc_verify_tls_sha256( ssl_context *ssl, unsigned char hash[32] ) |
| { |
| sha256_context sha256; |
| |
| SSL_DEBUG_MSG( 2, ( "=> calc verify sha256" ) ); |
| |
| memcpy( &sha256, &ssl->handshake->fin_sha256, sizeof(sha256_context) ); |
| sha256_finish( &sha256, hash ); |
| |
| SSL_DEBUG_BUF( 3, "calculated verify result", hash, 32 ); |
| SSL_DEBUG_MSG( 2, ( "<= calc verify" ) ); |
| |
| return; |
| } |
| #endif /* POLARSSL_SHA256_C */ |
| |
| #if defined(POLARSSL_SHA512_C) |
| void ssl_calc_verify_tls_sha384( ssl_context *ssl, unsigned char hash[48] ) |
| { |
| sha512_context sha512; |
| |
| SSL_DEBUG_MSG( 2, ( "=> calc verify sha384" ) ); |
| |
| memcpy( &sha512, &ssl->handshake->fin_sha512, sizeof(sha512_context) ); |
| sha512_finish( &sha512, hash ); |
| |
| SSL_DEBUG_BUF( 3, "calculated verify result", hash, 48 ); |
| SSL_DEBUG_MSG( 2, ( "<= calc verify" ) ); |
| |
| return; |
| } |
| #endif /* POLARSSL_SHA512_C */ |
| #endif /* POLARSSL_SSL_PROTO_TLS1_2 */ |
| |
| #if defined(POLARSSL_KEY_EXCHANGE__SOME__PSK_ENABLED) |
| int ssl_psk_derive_premaster( ssl_context *ssl, key_exchange_type_t key_ex ) |
| { |
| unsigned char *p = ssl->handshake->premaster; |
| unsigned char *end = p + sizeof( ssl->handshake->premaster ); |
| |
| /* |
| * PMS = struct { |
| * opaque other_secret<0..2^16-1>; |
| * opaque psk<0..2^16-1>; |
| * }; |
| * with "other_secret" depending on the particular key exchange |
| */ |
| #if defined(POLARSSL_KEY_EXCHANGE_PSK_ENABLED) |
| if( key_ex == POLARSSL_KEY_EXCHANGE_PSK ) |
| { |
| if( end - p < 2 + (int) ssl->psk_len ) |
| return( POLARSSL_ERR_SSL_BAD_INPUT_DATA ); |
| |
| *(p++) = (unsigned char)( ssl->psk_len >> 8 ); |
| *(p++) = (unsigned char)( ssl->psk_len ); |
| p += ssl->psk_len; |
| } |
| else |
| #endif /* POLARSSL_KEY_EXCHANGE_PSK_ENABLED */ |
| #if defined(POLARSSL_KEY_EXCHANGE_RSA_PSK_ENABLED) |
| if( key_ex == POLARSSL_KEY_EXCHANGE_RSA_PSK ) |
| { |
| /* |
| * other_secret already set by the ClientKeyExchange message, |
| * and is 48 bytes long |
| */ |
| *p++ = 0; |
| *p++ = 48; |
| p += 48; |
| } |
| else |
| #endif /* POLARSSL_KEY_EXCHANGE_RSA_PKS_ENABLED */ |
| #if defined(POLARSSL_KEY_EXCHANGE_DHE_PSK_ENABLED) |
| if( key_ex == POLARSSL_KEY_EXCHANGE_DHE_PSK ) |
| { |
| int ret; |
| size_t len = ssl->handshake->dhm_ctx.len; |
| |
| if( end - p < 2 + (int) len ) |
| return( POLARSSL_ERR_SSL_BAD_INPUT_DATA ); |
| |
| *(p++) = (unsigned char)( len >> 8 ); |
| *(p++) = (unsigned char)( len ); |
| if( ( ret = dhm_calc_secret( &ssl->handshake->dhm_ctx, |
| p, &len, ssl->f_rng, ssl->p_rng ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "dhm_calc_secret", ret ); |
| return( ret ); |
| } |
| p += len; |
| |
| SSL_DEBUG_MPI( 3, "DHM: K ", &ssl->handshake->dhm_ctx.K ); |
| } |
| else |
| #endif /* POLARSSL_KEY_EXCHANGE_DHE_PSK_ENABLED */ |
| #if defined(POLARSSL_KEY_EXCHANGE_ECDHE_PSK_ENABLED) |
| if( key_ex == POLARSSL_KEY_EXCHANGE_ECDHE_PSK ) |
| { |
| int ret; |
| size_t zlen; |
| |
| if( ( ret = ecdh_calc_secret( &ssl->handshake->ecdh_ctx, &zlen, |
| p + 2, end - (p + 2), |
| ssl->f_rng, ssl->p_rng ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "ecdh_calc_secret", ret ); |
| return( ret ); |
| } |
| |
| *(p++) = (unsigned char)( zlen >> 8 ); |
| *(p++) = (unsigned char)( zlen ); |
| p += zlen; |
| |
| SSL_DEBUG_MPI( 3, "ECDH: z", &ssl->handshake->ecdh_ctx.z ); |
| } |
| else |
| #endif /* POLARSSL_KEY_EXCHANGE_ECDHE_PSK_ENABLED */ |
| { |
| SSL_DEBUG_MSG( 1, ( "should never happen" ) ); |
| return( POLARSSL_ERR_SSL_INTERNAL_ERROR ); |
| } |
| |
| /* opaque psk<0..2^16-1>; */ |
| if( end - p < 2 + (int) ssl->psk_len ) |
| return( POLARSSL_ERR_SSL_BAD_INPUT_DATA ); |
| |
| *(p++) = (unsigned char)( ssl->psk_len >> 8 ); |
| *(p++) = (unsigned char)( ssl->psk_len ); |
| memcpy( p, ssl->psk, ssl->psk_len ); |
| p += ssl->psk_len; |
| |
| ssl->handshake->pmslen = p - ssl->handshake->premaster; |
| |
| return( 0 ); |
| } |
| #endif /* POLARSSL_KEY_EXCHANGE__SOME__PSK_ENABLED */ |
| |
| #if defined(POLARSSL_SSL_PROTO_SSL3) |
| /* |
| * SSLv3.0 MAC functions |
| */ |
| static void ssl_mac( md_context_t *md_ctx, unsigned char *secret, |
| unsigned char *buf, size_t len, |
| unsigned char *ctr, int type ) |
| { |
| unsigned char header[11]; |
| unsigned char padding[48]; |
| int padlen = 0; |
| int md_size = md_get_size( md_ctx->md_info ); |
| int md_type = md_get_type( md_ctx->md_info ); |
| |
| if( md_type == POLARSSL_MD_MD5 ) |
| padlen = 48; |
| else if( md_type == POLARSSL_MD_SHA1 ) |
| padlen = 40; |
| else if( md_type == POLARSSL_MD_SHA256 ) |
| padlen = 32; |
| else if( md_type == POLARSSL_MD_SHA384 ) |
| padlen = 16; |
| |
| memcpy( header, ctr, 8 ); |
| header[ 8] = (unsigned char) type; |
| header[ 9] = (unsigned char)( len >> 8 ); |
| header[10] = (unsigned char)( len ); |
| |
| memset( padding, 0x36, padlen ); |
| md_starts( md_ctx ); |
| md_update( md_ctx, secret, md_size ); |
| md_update( md_ctx, padding, padlen ); |
| md_update( md_ctx, header, 11 ); |
| md_update( md_ctx, buf, len ); |
| md_finish( md_ctx, buf + len ); |
| |
| memset( padding, 0x5C, padlen ); |
| md_starts( md_ctx ); |
| md_update( md_ctx, secret, md_size ); |
| md_update( md_ctx, padding, padlen ); |
| md_update( md_ctx, buf + len, md_size ); |
| md_finish( md_ctx, buf + len ); |
| } |
| #endif /* POLARSSL_SSL_PROTO_SSL3 */ |
| |
| /* |
| * Encryption/decryption functions |
| */ |
| static int ssl_encrypt_buf( ssl_context *ssl ) |
| { |
| size_t i; |
| |
| SSL_DEBUG_MSG( 2, ( "=> encrypt buf" ) ); |
| |
| /* |
| * Add MAC before encrypt, except for GCM |
| */ |
| #if defined(POLARSSL_ARC4_C) || defined(POLARSSL_CIPHER_NULL_CIPHER) || \ |
| ( defined(POLARSSL_CIPHER_MODE_CBC) && \ |
| ( defined(POLARSSL_AES_C) || defined(POLARSSL_CAMELLIA_C) ) ) |
| if( ssl->transform_out->cipher_ctx_enc.cipher_info->mode != |
| POLARSSL_MODE_GCM ) |
| { |
| #if defined(POLARSSL_SSL_PROTO_SSL3) |
| if( ssl->minor_ver == SSL_MINOR_VERSION_0 ) |
| { |
| ssl_mac( &ssl->transform_out->md_ctx_enc, |
| ssl->transform_out->mac_enc, |
| ssl->out_msg, ssl->out_msglen, |
| ssl->out_ctr, ssl->out_msgtype ); |
| } |
| else |
| #endif |
| #if defined(POLARSSL_SSL_PROTO_TLS1) || defined(POLARSSL_SSL_PROTO_TLS1_1) || \ |
| defined(POLARSSL_SSL_PROTO_TLS1_2) |
| if( ssl->minor_ver >= SSL_MINOR_VERSION_1 ) |
| { |
| md_hmac_update( &ssl->transform_out->md_ctx_enc, ssl->out_ctr, 13 ); |
| md_hmac_update( &ssl->transform_out->md_ctx_enc, |
| ssl->out_msg, ssl->out_msglen ); |
| md_hmac_finish( &ssl->transform_out->md_ctx_enc, |
| ssl->out_msg + ssl->out_msglen ); |
| md_hmac_reset( &ssl->transform_out->md_ctx_enc ); |
| } |
| else |
| #endif |
| { |
| SSL_DEBUG_MSG( 1, ( "should never happen" ) ); |
| return( POLARSSL_ERR_SSL_INTERNAL_ERROR ); |
| } |
| |
| SSL_DEBUG_BUF( 4, "computed mac", |
| ssl->out_msg + ssl->out_msglen, |
| ssl->transform_out->maclen ); |
| |
| ssl->out_msglen += ssl->transform_out->maclen; |
| } |
| #endif /* GCM not the only option */ |
| |
| /* |
| * Encrypt |
| */ |
| #if defined(POLARSSL_ARC4_C) || defined(POLARSSL_CIPHER_NULL_CIPHER) |
| if( ssl->transform_out->cipher_ctx_enc.cipher_info->mode == |
| POLARSSL_MODE_STREAM ) |
| { |
| int ret; |
| size_t olen = 0; |
| |
| SSL_DEBUG_MSG( 3, ( "before encrypt: msglen = %d, " |
| "including %d bytes of padding", |
| ssl->out_msglen, 0 ) ); |
| |
| SSL_DEBUG_BUF( 4, "before encrypt: output payload", |
| ssl->out_msg, ssl->out_msglen ); |
| |
| if( ( ret = cipher_reset( &ssl->transform_out->cipher_ctx_enc ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "cipher_reset", ret ); |
| return( ret ); |
| } |
| |
| if( ( ret = cipher_set_iv( &ssl->transform_out->cipher_ctx_enc, |
| ssl->transform_out->iv_enc, |
| ssl->transform_out->ivlen ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "cipher_set_iv", ret ); |
| return( ret ); |
| } |
| |
| if( ( ret = cipher_update( &ssl->transform_out->cipher_ctx_enc, |
| ssl->out_msg, ssl->out_msglen, ssl->out_msg, |
| &olen ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "cipher_update", ret ); |
| return( ret ); |
| } |
| |
| if( ssl->out_msglen != olen ) |
| { |
| SSL_DEBUG_MSG( 1, ( "total encrypted length incorrect %d %d", |
| ssl->out_msglen, olen ) ); |
| return( POLARSSL_ERR_SSL_INTERNAL_ERROR ); |
| } |
| |
| if( ( ret = cipher_finish( &ssl->transform_out->cipher_ctx_enc, |
| ssl->out_msg + olen, &olen ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "cipher_finish", ret ); |
| return( ret ); |
| } |
| |
| if( 0 != olen ) |
| { |
| SSL_DEBUG_MSG( 1, ( "total encrypted length incorrect %d %d", |
| 0, olen ) ); |
| return( POLARSSL_ERR_SSL_INTERNAL_ERROR ); |
| } |
| } |
| else |
| #endif /* POLARSSL_ARC4_C || POLARSSL_CIPHER_NULL_CIPHER */ |
| #if defined(POLARSSL_GCM_C) |
| if( ssl->transform_out->cipher_ctx_enc.cipher_info->mode == |
| POLARSSL_MODE_GCM ) |
| { |
| size_t enc_msglen, olen, totlen; |
| unsigned char *enc_msg; |
| unsigned char add_data[13]; |
| int ret = POLARSSL_ERR_SSL_FEATURE_UNAVAILABLE; |
| |
| memcpy( add_data, ssl->out_ctr, 8 ); |
| add_data[8] = ssl->out_msgtype; |
| add_data[9] = ssl->major_ver; |
| add_data[10] = ssl->minor_ver; |
| add_data[11] = ( ssl->out_msglen >> 8 ) & 0xFF; |
| add_data[12] = ssl->out_msglen & 0xFF; |
| |
| SSL_DEBUG_BUF( 4, "additional data used for AEAD", |
| add_data, 13 ); |
| |
| /* |
| * Generate IV |
| */ |
| ret = ssl->f_rng( ssl->p_rng, |
| ssl->transform_out->iv_enc + ssl->transform_out->fixed_ivlen, |
| ssl->transform_out->ivlen - ssl->transform_out->fixed_ivlen ); |
| if( ret != 0 ) |
| return( ret ); |
| |
| memcpy( ssl->out_iv, |
| ssl->transform_out->iv_enc + ssl->transform_out->fixed_ivlen, |
| ssl->transform_out->ivlen - ssl->transform_out->fixed_ivlen ); |
| |
| SSL_DEBUG_BUF( 4, "IV used", ssl->out_iv, |
| ssl->transform_out->ivlen - ssl->transform_out->fixed_ivlen ); |
| |
| /* |
| * Fix pointer positions and message length with added IV |
| */ |
| enc_msg = ssl->out_msg; |
| enc_msglen = ssl->out_msglen; |
| ssl->out_msglen += ssl->transform_out->ivlen - |
| ssl->transform_out->fixed_ivlen; |
| |
| SSL_DEBUG_MSG( 3, ( "before encrypt: msglen = %d, " |
| "including %d bytes of padding", |
| ssl->out_msglen, 0 ) ); |
| |
| SSL_DEBUG_BUF( 4, "before encrypt: output payload", |
| ssl->out_msg, ssl->out_msglen ); |
| |
| /* |
| * Encrypt |
| */ |
| if( ( ret = cipher_set_iv( &ssl->transform_out->cipher_ctx_enc, |
| ssl->transform_out->iv_enc, |
| ssl->transform_out->ivlen ) ) != 0 || |
| ( ret = cipher_reset( &ssl->transform_out->cipher_ctx_enc ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "cipher_reset", ret ); |
| return( ret ); |
| } |
| |
| if( ( ret = cipher_update_ad( &ssl->transform_out->cipher_ctx_enc, |
| add_data, 13 ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "cipher_update_ad", ret ); |
| return( ret ); |
| } |
| |
| if( ( ret = cipher_update( &ssl->transform_out->cipher_ctx_enc, |
| enc_msg, enc_msglen, |
| enc_msg, &olen ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "cipher_update", ret ); |
| return( ret ); |
| } |
| totlen = olen; |
| |
| if( ( ret = cipher_finish( &ssl->transform_out->cipher_ctx_enc, |
| enc_msg + olen, &olen ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "cipher_finish", ret ); |
| return( ret ); |
| } |
| totlen += olen; |
| |
| if( totlen != enc_msglen ) |
| { |
| SSL_DEBUG_MSG( 1, ( "should never happen" ) ); |
| return( POLARSSL_ERR_SSL_INTERNAL_ERROR ); |
| } |
| |
| /* |
| * Authenticate |
| */ |
| ssl->out_msglen += 16; |
| |
| if( ( ret = cipher_write_tag( &ssl->transform_out->cipher_ctx_enc, |
| enc_msg + enc_msglen, 16 ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "cipher_write_tag", ret ); |
| return( ret ); |
| } |
| |
| SSL_DEBUG_BUF( 4, "after encrypt: tag", enc_msg + enc_msglen, 16 ); |
| } |
| else |
| #endif /* POLARSSL_GCM_C */ |
| #if defined(POLARSSL_CIPHER_MODE_CBC) && \ |
| ( defined(POLARSSL_AES_C) || defined(POLARSSL_CAMELLIA_C) ) |
| if( ssl->transform_out->cipher_ctx_enc.cipher_info->mode == |
| POLARSSL_MODE_CBC ) |
| { |
| int ret; |
| unsigned char *enc_msg; |
| size_t enc_msglen, padlen, olen = 0; |
| |
| padlen = ssl->transform_out->ivlen - ( ssl->out_msglen + 1 ) % |
| ssl->transform_out->ivlen; |
| if( padlen == ssl->transform_out->ivlen ) |
| padlen = 0; |
| |
| for( i = 0; i <= padlen; i++ ) |
| ssl->out_msg[ssl->out_msglen + i] = (unsigned char) padlen; |
| |
| ssl->out_msglen += padlen + 1; |
| |
| enc_msglen = ssl->out_msglen; |
| enc_msg = ssl->out_msg; |
| |
| #if defined(POLARSSL_SSL_PROTO_TLS1_1) || defined(POLARSSL_SSL_PROTO_TLS1_2) |
| /* |
| * Prepend per-record IV for block cipher in TLS v1.1 and up as per |
| * Method 1 (6.2.3.2. in RFC4346 and RFC5246) |
| */ |
| if( ssl->minor_ver >= SSL_MINOR_VERSION_2 ) |
| { |
| /* |
| * Generate IV |
| */ |
| int ret = ssl->f_rng( ssl->p_rng, ssl->transform_out->iv_enc, |
| ssl->transform_out->ivlen ); |
| if( ret != 0 ) |
| return( ret ); |
| |
| memcpy( ssl->out_iv, ssl->transform_out->iv_enc, |
| ssl->transform_out->ivlen ); |
| |
| /* |
| * Fix pointer positions and message length with added IV |
| */ |
| enc_msg = ssl->out_msg; |
| enc_msglen = ssl->out_msglen; |
| ssl->out_msglen += ssl->transform_out->ivlen; |
| } |
| #endif /* POLARSSL_SSL_PROTO_TLS1_1 || POLARSSL_SSL_PROTO_TLS1_2 */ |
| |
| SSL_DEBUG_MSG( 3, ( "before encrypt: msglen = %d, " |
| "including %d bytes of IV and %d bytes of padding", |
| ssl->out_msglen, ssl->transform_out->ivlen, |
| padlen + 1 ) ); |
| |
| SSL_DEBUG_BUF( 4, "before encrypt: output payload", |
| ssl->out_iv, ssl->out_msglen ); |
| |
| if( ( ret = cipher_reset( &ssl->transform_out->cipher_ctx_enc ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "cipher_reset", ret ); |
| return( ret ); |
| } |
| |
| if( ( ret = cipher_set_iv( &ssl->transform_out->cipher_ctx_enc, |
| ssl->transform_out->iv_enc, |
| ssl->transform_out->ivlen ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "cipher_set_iv", ret ); |
| return( ret ); |
| } |
| |
| if( ( ret = cipher_update( &ssl->transform_out->cipher_ctx_enc, |
| enc_msg, enc_msglen, enc_msg, |
| &olen ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "cipher_update", ret ); |
| return( ret ); |
| } |
| |
| enc_msglen -= olen; |
| |
| if( ( ret = cipher_finish( &ssl->transform_out->cipher_ctx_enc, |
| enc_msg + olen, &olen ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "cipher_finish", ret ); |
| return( ret ); |
| } |
| |
| if( enc_msglen != olen ) |
| { |
| SSL_DEBUG_MSG( 1, ( "total encrypted length incorrect %d %d", |
| enc_msglen, olen ) ); |
| return( POLARSSL_ERR_SSL_INTERNAL_ERROR ); |
| } |
| |
| #if defined(POLARSSL_SSL_PROTO_SSL3) || defined(POLARSSL_SSL_PROTO_TLS1) |
| if( ssl->minor_ver < SSL_MINOR_VERSION_2 ) |
| { |
| /* |
| * Save IV in SSL3 and TLS1 |
| */ |
| memcpy( ssl->transform_out->iv_enc, |
| ssl->transform_out->cipher_ctx_enc.iv, |
| ssl->transform_out->ivlen ); |
| } |
| #endif |
| } |
| else |
| #endif /* POLARSSL_CIPHER_MODE_CBC && |
| ( POLARSSL_AES_C || POLARSSL_CAMELLIA_C ) */ |
| { |
| SSL_DEBUG_MSG( 1, ( "should never happen" ) ); |
| return( POLARSSL_ERR_SSL_INTERNAL_ERROR ); |
| } |
| |
| for( i = 8; i > 0; i-- ) |
| if( ++ssl->out_ctr[i - 1] != 0 ) |
| break; |
| |
| /* The loops goes to its end iff the counter is wrapping */ |
| if( i == 0 ) |
| { |
| SSL_DEBUG_MSG( 1, ( "outgoing message counter would wrap" ) ); |
| return( POLARSSL_ERR_SSL_COUNTER_WRAPPING ); |
| } |
| |
| SSL_DEBUG_MSG( 2, ( "<= encrypt buf" ) ); |
| |
| return( 0 ); |
| } |
| |
| #define POLARSSL_SSL_MAX_MAC_SIZE 48 |
| |
| static int ssl_decrypt_buf( ssl_context *ssl ) |
| { |
| size_t i; |
| #if defined(POLARSSL_ARC4_C) || defined(POLARSSL_CIPHER_NULL_CIPHER) || \ |
| ( defined(POLARSSL_CIPHER_MODE_CBC) && \ |
| ( defined(POLARSSL_AES_C) || defined(POLARSSL_CAMELLIA_C) ) ) |
| size_t padlen = 0, correct = 1; |
| #endif |
| |
| SSL_DEBUG_MSG( 2, ( "=> decrypt buf" ) ); |
| |
| if( ssl->in_msglen < ssl->transform_in->minlen ) |
| { |
| SSL_DEBUG_MSG( 1, ( "in_msglen (%d) < minlen (%d)", |
| ssl->in_msglen, ssl->transform_in->minlen ) ); |
| return( POLARSSL_ERR_SSL_INVALID_MAC ); |
| } |
| |
| #if defined(POLARSSL_ARC4_C) || defined(POLARSSL_CIPHER_NULL_CIPHER) |
| if( ssl->transform_in->cipher_ctx_dec.cipher_info->mode == |
| POLARSSL_MODE_STREAM ) |
| { |
| int ret; |
| size_t olen = 0; |
| |
| padlen = 0; |
| |
| if( ( ret = cipher_reset( &ssl->transform_in->cipher_ctx_dec ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "cipher_reset", ret ); |
| return( ret ); |
| } |
| |
| if( ( ret = cipher_set_iv( &ssl->transform_in->cipher_ctx_dec, |
| ssl->transform_in->iv_dec, |
| ssl->transform_in->ivlen ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "cipher_set_iv", ret ); |
| return( ret ); |
| } |
| |
| if( ( ret = cipher_update( &ssl->transform_in->cipher_ctx_dec, |
| ssl->in_msg, ssl->in_msglen, ssl->in_msg, |
| &olen ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "cipher_update", ret ); |
| return( ret ); |
| } |
| |
| if( ssl->in_msglen != olen ) |
| { |
| SSL_DEBUG_MSG( 1, ( "total encrypted length incorrect" ) ); |
| return( POLARSSL_ERR_SSL_INTERNAL_ERROR ); |
| } |
| |
| if( ( ret = cipher_finish( &ssl->transform_in->cipher_ctx_dec, |
| ssl->in_msg + olen, &olen ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "cipher_finish", ret ); |
| return( ret ); |
| } |
| |
| if( 0 != olen ) |
| { |
| SSL_DEBUG_MSG( 1, ( "total encrypted length incorrect" ) ); |
| return( POLARSSL_ERR_SSL_INTERNAL_ERROR ); |
| } |
| } |
| else |
| #endif /* POLARSSL_ARC4_C || POLARSSL_CIPHER_NULL_CIPHER */ |
| #if defined(POLARSSL_GCM_C) |
| if( ssl->transform_in->cipher_ctx_dec.cipher_info->mode == |
| POLARSSL_MODE_GCM ) |
| { |
| unsigned char *dec_msg; |
| unsigned char *dec_msg_result; |
| size_t dec_msglen, olen, totlen; |
| unsigned char add_data[13]; |
| int ret = POLARSSL_ERR_SSL_FEATURE_UNAVAILABLE; |
| |
| dec_msglen = ssl->in_msglen - ( ssl->transform_in->ivlen - |
| ssl->transform_in->fixed_ivlen ); |
| dec_msglen -= 16; |
| dec_msg = ssl->in_msg; |
| dec_msg_result = ssl->in_msg; |
| ssl->in_msglen = dec_msglen; |
| |
| memcpy( add_data, ssl->in_ctr, 8 ); |
| add_data[8] = ssl->in_msgtype; |
| add_data[9] = ssl->major_ver; |
| add_data[10] = ssl->minor_ver; |
| add_data[11] = ( ssl->in_msglen >> 8 ) & 0xFF; |
| add_data[12] = ssl->in_msglen & 0xFF; |
| |
| SSL_DEBUG_BUF( 4, "additional data used for AEAD", |
| add_data, 13 ); |
| |
| memcpy( ssl->transform_in->iv_dec + ssl->transform_in->fixed_ivlen, |
| ssl->in_iv, |
| ssl->transform_in->ivlen - ssl->transform_in->fixed_ivlen ); |
| |
| SSL_DEBUG_BUF( 4, "IV used", ssl->transform_in->iv_dec, |
| ssl->transform_in->ivlen ); |
| SSL_DEBUG_BUF( 4, "TAG used", dec_msg + dec_msglen, 16 ); |
| |
| /* |
| * Decrypt |
| */ |
| if( ( ret = cipher_set_iv( &ssl->transform_in->cipher_ctx_dec, |
| ssl->transform_in->iv_dec, |
| ssl->transform_in->ivlen ) ) != 0 || |
| ( ret = cipher_reset( &ssl->transform_in->cipher_ctx_dec ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "cipher_reset", ret ); |
| return( ret ); |
| } |
| |
| if( ( ret = cipher_update_ad( &ssl->transform_in->cipher_ctx_dec, |
| add_data, 13 ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "cipher_update_ad", ret ); |
| return( ret ); |
| } |
| |
| if( ( ret = cipher_update( &ssl->transform_in->cipher_ctx_dec, |
| dec_msg, dec_msglen, |
| dec_msg_result, &olen ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "cipher_update", ret ); |
| return( ret ); |
| } |
| totlen = olen; |
| |
| if( ( ret = cipher_finish( &ssl->transform_in->cipher_ctx_dec, |
| dec_msg_result + olen, &olen ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "cipher_finish", ret ); |
| return( ret ); |
| } |
| totlen += olen; |
| |
| if( totlen != dec_msglen ) |
| { |
| SSL_DEBUG_MSG( 1, ( "should never happen" ) ); |
| return( POLARSSL_ERR_SSL_INTERNAL_ERROR ); |
| } |
| |
| /* |
| * Authenticate |
| */ |
| if( ( ret = cipher_check_tag( &ssl->transform_in->cipher_ctx_dec, |
| dec_msg + dec_msglen, 16 ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "cipher_check_tag", ret ); |
| return( POLARSSL_ERR_SSL_INVALID_MAC ); |
| } |
| |
| } |
| else |
| #endif /* POLARSSL_GCM_C */ |
| #if defined(POLARSSL_CIPHER_MODE_CBC) && \ |
| ( defined(POLARSSL_AES_C) || defined(POLARSSL_CAMELLIA_C) ) |
| if( ssl->transform_in->cipher_ctx_dec.cipher_info->mode == |
| POLARSSL_MODE_CBC ) |
| { |
| /* |
| * Decrypt and check the padding |
| */ |
| int ret; |
| unsigned char *dec_msg; |
| unsigned char *dec_msg_result; |
| size_t dec_msglen; |
| size_t minlen = 0; |
| size_t olen = 0; |
| |
| /* |
| * Check immediate ciphertext sanity |
| */ |
| if( ssl->in_msglen % ssl->transform_in->ivlen != 0 ) |
| { |
| SSL_DEBUG_MSG( 1, ( "msglen (%d) %% ivlen (%d) != 0", |
| ssl->in_msglen, ssl->transform_in->ivlen ) ); |
| return( POLARSSL_ERR_SSL_INVALID_MAC ); |
| } |
| |
| #if defined(POLARSSL_SSL_PROTO_TLS1_1) || defined(POLARSSL_SSL_PROTO_TLS1_2) |
| if( ssl->minor_ver >= SSL_MINOR_VERSION_2 ) |
| minlen += ssl->transform_in->ivlen; |
| #endif |
| |
| if( ssl->in_msglen < minlen + ssl->transform_in->ivlen || |
| ssl->in_msglen < minlen + ssl->transform_in->maclen + 1 ) |
| { |
| SSL_DEBUG_MSG( 1, ( "msglen (%d) < max( ivlen(%d), maclen (%d) " |
| "+ 1 ) ( + expl IV )", ssl->in_msglen, |
| ssl->transform_in->ivlen, |
| ssl->transform_in->maclen ) ); |
| return( POLARSSL_ERR_SSL_INVALID_MAC ); |
| } |
| |
| dec_msglen = ssl->in_msglen; |
| dec_msg = ssl->in_msg; |
| dec_msg_result = ssl->in_msg; |
| |
| #if defined(POLARSSL_SSL_PROTO_TLS1_1) || defined(POLARSSL_SSL_PROTO_TLS1_2) |
| /* |
| * Initialize for prepended IV for block cipher in TLS v1.1 and up |
| */ |
| if( ssl->minor_ver >= SSL_MINOR_VERSION_2 ) |
| { |
| dec_msglen -= ssl->transform_in->ivlen; |
| ssl->in_msglen -= ssl->transform_in->ivlen; |
| |
| for( i = 0; i < ssl->transform_in->ivlen; i++ ) |
| ssl->transform_in->iv_dec[i] = ssl->in_iv[i]; |
| } |
| #endif /* POLARSSL_SSL_PROTO_TLS1_1 || POLARSSL_SSL_PROTO_TLS1_2 */ |
| |
| if( ( ret = cipher_reset( &ssl->transform_in->cipher_ctx_dec ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "cipher_reset", ret ); |
| return( ret ); |
| } |
| |
| if( ( ret = cipher_set_iv( &ssl->transform_in->cipher_ctx_dec, |
| ssl->transform_in->iv_dec, |
| ssl->transform_in->ivlen ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "cipher_set_iv", ret ); |
| return( ret ); |
| } |
| |
| if( ( ret = cipher_update( &ssl->transform_in->cipher_ctx_dec, |
| dec_msg, dec_msglen, dec_msg_result, |
| &olen ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "cipher_update", ret ); |
| return( ret ); |
| } |
| |
| dec_msglen -= olen; |
| if( ( ret = cipher_finish( &ssl->transform_in->cipher_ctx_dec, |
| dec_msg_result + olen, &olen ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "cipher_finish", ret ); |
| return( ret ); |
| } |
| |
| if( dec_msglen != olen ) |
| { |
| SSL_DEBUG_MSG( 1, ( "total encrypted length incorrect" ) ); |
| return( POLARSSL_ERR_SSL_INTERNAL_ERROR ); |
| } |
| |
| #if defined(POLARSSL_SSL_PROTO_SSL3) || defined(POLARSSL_SSL_PROTO_TLS1) |
| if( ssl->minor_ver < SSL_MINOR_VERSION_2 ) |
| { |
| /* |
| * Save IV in SSL3 and TLS1 |
| */ |
| memcpy( ssl->transform_in->iv_dec, |
| ssl->transform_in->cipher_ctx_dec.iv, |
| ssl->transform_in->ivlen ); |
| } |
| #endif |
| |
| padlen = 1 + ssl->in_msg[ssl->in_msglen - 1]; |
| |
| if( ssl->in_msglen < ssl->transform_in->maclen + padlen ) |
| { |
| #if defined(POLARSSL_SSL_DEBUG_ALL) |
| SSL_DEBUG_MSG( 1, ( "msglen (%d) < maclen (%d) + padlen (%d)", |
| ssl->in_msglen, ssl->transform_in->maclen, padlen ) ); |
| #endif |
| padlen = 0; |
| correct = 0; |
| } |
| |
| #if defined(POLARSSL_SSL_PROTO_SSL3) |
| if( ssl->minor_ver == SSL_MINOR_VERSION_0 ) |
| { |
| if( padlen > ssl->transform_in->ivlen ) |
| { |
| #if defined(POLARSSL_SSL_DEBUG_ALL) |
| SSL_DEBUG_MSG( 1, ( "bad padding length: is %d, " |
| "should be no more than %d", |
| padlen, ssl->transform_in->ivlen ) ); |
| #endif |
| correct = 0; |
| } |
| } |
| else |
| #endif /* POLARSSL_SSL_PROTO_SSL3 */ |
| #if defined(POLARSSL_SSL_PROTO_TLS1) || defined(POLARSSL_SSL_PROTO_TLS1_1) || \ |
| defined(POLARSSL_SSL_PROTO_TLS1_2) |
| if( ssl->minor_ver > SSL_MINOR_VERSION_0 ) |
| { |
| /* |
| * TLSv1+: always check the padding up to the first failure |
| * and fake check up to 256 bytes of padding |
| */ |
| size_t pad_count = 0, real_count = 1; |
| size_t padding_idx = ssl->in_msglen - padlen - 1; |
| |
| /* |
| * Padding is guaranteed to be incorrect if: |
| * 1. padlen >= ssl->in_msglen |
| * |
| * 2. padding_idx >= SSL_MAX_CONTENT_LEN + |
| * ssl->transform_in->maclen |
| * |
| * In both cases we reset padding_idx to a safe value (0) to |
| * prevent out-of-buffer reads. |
| */ |
| correct &= ( ssl->in_msglen >= padlen + 1 ); |
| correct &= ( padding_idx < SSL_MAX_CONTENT_LEN + |
| ssl->transform_in->maclen ); |
| |
| padding_idx *= correct; |
| |
| for( i = 1; i <= 256; i++ ) |
| { |
| real_count &= ( i <= padlen ); |
| pad_count += real_count * |
| ( ssl->in_msg[padding_idx + i] == padlen - 1 ); |
| } |
| |
| correct &= ( pad_count == padlen ); /* Only 1 on correct padding */ |
| |
| #if defined(POLARSSL_SSL_DEBUG_ALL) |
| if( padlen > 0 && correct == 0) |
| SSL_DEBUG_MSG( 1, ( "bad padding byte detected" ) ); |
| #endif |
| padlen &= correct * 0x1FF; |
| } |
| else |
| #endif /* POLARSSL_SSL_PROTO_TLS1 || POLARSSL_SSL_PROTO_TLS1_1 || \ |
| POLARSSL_SSL_PROTO_TLS1_2 */ |
| { |
| SSL_DEBUG_MSG( 1, ( "should never happen" ) ); |
| return( POLARSSL_ERR_SSL_INTERNAL_ERROR ); |
| } |
| } |
| else |
| #endif /* POLARSSL_CIPHER_MODE_CBC && |
| ( POLARSSL_AES_C || POLARSSL_CAMELLIA_C ) */ |
| { |
| SSL_DEBUG_MSG( 1, ( "should never happen" ) ); |
| return( POLARSSL_ERR_SSL_INTERNAL_ERROR ); |
| } |
| |
| SSL_DEBUG_BUF( 4, "raw buffer after decryption", |
| ssl->in_msg, ssl->in_msglen ); |
| |
| /* |
| * Always compute the MAC (RFC4346, CBCTIME), except for GCM of course |
| */ |
| #if defined(POLARSSL_ARC4_C) || defined(POLARSSL_CIPHER_NULL_CIPHER) || \ |
| ( defined(POLARSSL_CIPHER_MODE_CBC) && \ |
| ( defined(POLARSSL_AES_C) || defined(POLARSSL_CAMELLIA_C) ) ) |
| if( ssl->transform_in->cipher_ctx_dec.cipher_info->mode != |
| POLARSSL_MODE_GCM ) |
| { |
| unsigned char tmp[POLARSSL_SSL_MAX_MAC_SIZE]; |
| |
| ssl->in_msglen -= ( ssl->transform_in->maclen + padlen ); |
| |
| ssl->in_hdr[3] = (unsigned char)( ssl->in_msglen >> 8 ); |
| ssl->in_hdr[4] = (unsigned char)( ssl->in_msglen ); |
| |
| memcpy( tmp, ssl->in_msg + ssl->in_msglen, ssl->transform_in->maclen ); |
| |
| #if defined(POLARSSL_SSL_PROTO_SSL3) |
| if( ssl->minor_ver == SSL_MINOR_VERSION_0 ) |
| { |
| ssl_mac( &ssl->transform_in->md_ctx_dec, |
| ssl->transform_in->mac_dec, |
| ssl->in_msg, ssl->in_msglen, |
| ssl->in_ctr, ssl->in_msgtype ); |
| } |
| else |
| #endif /* POLARSSL_SSL_PROTO_SSL3 */ |
| #if defined(POLARSSL_SSL_PROTO_TLS1) || defined(POLARSSL_SSL_PROTO_TLS1_1) || \ |
| defined(POLARSSL_SSL_PROTO_TLS1_2) |
| if( ssl->minor_ver > SSL_MINOR_VERSION_0 ) |
| { |
| /* |
| * Process MAC and always update for padlen afterwards to make |
| * total time independent of padlen |
| * |
| * extra_run compensates MAC check for padlen |
| * |
| * Known timing attacks: |
| * - Lucky Thirteen (http://www.isg.rhul.ac.uk/tls/TLStiming.pdf) |
| * |
| * We use ( ( Lx + 8 ) / 64 ) to handle 'negative Lx' values |
| * correctly. (We round down instead of up, so -56 is the correct |
| * value for our calculations instead of -55) |
| */ |
| size_t j, extra_run = 0; |
| extra_run = ( 13 + ssl->in_msglen + padlen + 8 ) / 64 - |
| ( 13 + ssl->in_msglen + 8 ) / 64; |
| |
| extra_run &= correct * 0xFF; |
| |
| md_hmac_update( &ssl->transform_in->md_ctx_dec, ssl->in_ctr, 13 ); |
| md_hmac_update( &ssl->transform_in->md_ctx_dec, ssl->in_msg, |
| ssl->in_msglen ); |
| md_hmac_finish( &ssl->transform_in->md_ctx_dec, |
| ssl->in_msg + ssl->in_msglen ); |
| for( j = 0; j < extra_run; j++ ) |
| md_process( &ssl->transform_in->md_ctx_dec, ssl->in_msg ); |
| |
| md_hmac_reset( &ssl->transform_in->md_ctx_dec ); |
| } |
| else |
| #endif /* POLARSSL_SSL_PROTO_TLS1 || POLARSSL_SSL_PROTO_TLS1_1 || \ |
| POLARSSL_SSL_PROTO_TLS1_2 */ |
| { |
| SSL_DEBUG_MSG( 1, ( "should never happen" ) ); |
| return( POLARSSL_ERR_SSL_INTERNAL_ERROR ); |
| } |
| |
| SSL_DEBUG_BUF( 4, "message mac", tmp, ssl->transform_in->maclen ); |
| SSL_DEBUG_BUF( 4, "computed mac", ssl->in_msg + ssl->in_msglen, |
| ssl->transform_in->maclen ); |
| |
| if( safer_memcmp( tmp, ssl->in_msg + ssl->in_msglen, |
| ssl->transform_in->maclen ) != 0 ) |
| { |
| #if defined(POLARSSL_SSL_DEBUG_ALL) |
| SSL_DEBUG_MSG( 1, ( "message mac does not match" ) ); |
| #endif |
| correct = 0; |
| } |
| |
| /* |
| * Finally check the correct flag |
| */ |
| if( correct == 0 ) |
| return( POLARSSL_ERR_SSL_INVALID_MAC ); |
| } |
| #endif /* GCM not the only option */ |
| |
| if( ssl->in_msglen == 0 ) |
| { |
| ssl->nb_zero++; |
| |
| /* |
| * Three or more empty messages may be a DoS attack |
| * (excessive CPU consumption). |
| */ |
| if( ssl->nb_zero > 3 ) |
| { |
| SSL_DEBUG_MSG( 1, ( "received four consecutive empty " |
| "messages, possible DoS attack" ) ); |
| return( POLARSSL_ERR_SSL_INVALID_MAC ); |
| } |
| } |
| else |
| ssl->nb_zero = 0; |
| |
| for( i = 8; i > 0; i-- ) |
| if( ++ssl->in_ctr[i - 1] != 0 ) |
| break; |
| |
| /* The loops goes to its end iff the counter is wrapping */ |
| if( i == 0 ) |
| { |
| SSL_DEBUG_MSG( 1, ( "incoming message counter would wrap" ) ); |
| return( POLARSSL_ERR_SSL_COUNTER_WRAPPING ); |
| } |
| |
| SSL_DEBUG_MSG( 2, ( "<= decrypt buf" ) ); |
| |
| return( 0 ); |
| } |
| |
| #if defined(POLARSSL_ZLIB_SUPPORT) |
| /* |
| * Compression/decompression functions |
| */ |
| static int ssl_compress_buf( ssl_context *ssl ) |
| { |
| int ret; |
| unsigned char *msg_post = ssl->out_msg; |
| size_t len_pre = ssl->out_msglen; |
| unsigned char *msg_pre = ssl->compress_buf; |
| |
| SSL_DEBUG_MSG( 2, ( "=> compress buf" ) ); |
| |
| if( len_pre == 0 ) |
| return( 0 ); |
| |
| memcpy( msg_pre, ssl->out_msg, len_pre ); |
| |
| SSL_DEBUG_MSG( 3, ( "before compression: msglen = %d, ", |
| ssl->out_msglen ) ); |
| |
| SSL_DEBUG_BUF( 4, "before compression: output payload", |
| ssl->out_msg, ssl->out_msglen ); |
| |
| ssl->transform_out->ctx_deflate.next_in = msg_pre; |
| ssl->transform_out->ctx_deflate.avail_in = len_pre; |
| ssl->transform_out->ctx_deflate.next_out = msg_post; |
| ssl->transform_out->ctx_deflate.avail_out = SSL_BUFFER_LEN; |
| |
| ret = deflate( &ssl->transform_out->ctx_deflate, Z_SYNC_FLUSH ); |
| if( ret != Z_OK ) |
| { |
| SSL_DEBUG_MSG( 1, ( "failed to perform compression (%d)", ret ) ); |
| return( POLARSSL_ERR_SSL_COMPRESSION_FAILED ); |
| } |
| |
| ssl->out_msglen = SSL_BUFFER_LEN - |
| ssl->transform_out->ctx_deflate.avail_out; |
| |
| SSL_DEBUG_MSG( 3, ( "after compression: msglen = %d, ", |
| ssl->out_msglen ) ); |
| |
| SSL_DEBUG_BUF( 4, "after compression: output payload", |
| ssl->out_msg, ssl->out_msglen ); |
| |
| SSL_DEBUG_MSG( 2, ( "<= compress buf" ) ); |
| |
| return( 0 ); |
| } |
| |
| static int ssl_decompress_buf( ssl_context *ssl ) |
| { |
| int ret; |
| unsigned char *msg_post = ssl->in_msg; |
| size_t len_pre = ssl->in_msglen; |
| unsigned char *msg_pre = ssl->compress_buf; |
| |
| SSL_DEBUG_MSG( 2, ( "=> decompress buf" ) ); |
| |
| if( len_pre == 0 ) |
| return( 0 ); |
| |
| memcpy( msg_pre, ssl->in_msg, len_pre ); |
| |
| SSL_DEBUG_MSG( 3, ( "before decompression: msglen = %d, ", |
| ssl->in_msglen ) ); |
| |
| SSL_DEBUG_BUF( 4, "before decompression: input payload", |
| ssl->in_msg, ssl->in_msglen ); |
| |
| ssl->transform_in->ctx_inflate.next_in = msg_pre; |
| ssl->transform_in->ctx_inflate.avail_in = len_pre; |
| ssl->transform_in->ctx_inflate.next_out = msg_post; |
| ssl->transform_in->ctx_inflate.avail_out = SSL_MAX_CONTENT_LEN; |
| |
| ret = inflate( &ssl->transform_in->ctx_inflate, Z_SYNC_FLUSH ); |
| if( ret != Z_OK ) |
| { |
| SSL_DEBUG_MSG( 1, ( "failed to perform decompression (%d)", ret ) ); |
| return( POLARSSL_ERR_SSL_COMPRESSION_FAILED ); |
| } |
| |
| ssl->in_msglen = SSL_MAX_CONTENT_LEN - |
| ssl->transform_in->ctx_inflate.avail_out; |
| |
| SSL_DEBUG_MSG( 3, ( "after decompression: msglen = %d, ", |
| ssl->in_msglen ) ); |
| |
| SSL_DEBUG_BUF( 4, "after decompression: input payload", |
| ssl->in_msg, ssl->in_msglen ); |
| |
| SSL_DEBUG_MSG( 2, ( "<= decompress buf" ) ); |
| |
| return( 0 ); |
| } |
| #endif /* POLARSSL_ZLIB_SUPPORT */ |
| |
| /* |
| * Fill the input message buffer |
| */ |
| int ssl_fetch_input( ssl_context *ssl, size_t nb_want ) |
| { |
| int ret; |
| size_t len; |
| |
| SSL_DEBUG_MSG( 2, ( "=> fetch input" ) ); |
| |
| if( nb_want > SSL_BUFFER_LEN - 8 ) |
| { |
| SSL_DEBUG_MSG( 1, ( "requesting more data than fits" ) ); |
| return( POLARSSL_ERR_SSL_BAD_INPUT_DATA ); |
| } |
| |
| while( ssl->in_left < nb_want ) |
| { |
| len = nb_want - ssl->in_left; |
| ret = ssl->f_recv( ssl->p_recv, ssl->in_hdr + ssl->in_left, len ); |
| |
| SSL_DEBUG_MSG( 2, ( "in_left: %d, nb_want: %d", |
| ssl->in_left, nb_want ) ); |
| SSL_DEBUG_RET( 2, "ssl->f_recv", ret ); |
| |
| if( ret == 0 ) |
| return( POLARSSL_ERR_SSL_CONN_EOF ); |
| |
| if( ret < 0 ) |
| return( ret ); |
| |
| ssl->in_left += ret; |
| } |
| |
| SSL_DEBUG_MSG( 2, ( "<= fetch input" ) ); |
| |
| return( 0 ); |
| } |
| |
| /* |
| * Flush any data not yet written |
| */ |
| int ssl_flush_output( ssl_context *ssl ) |
| { |
| int ret; |
| unsigned char *buf; |
| |
| SSL_DEBUG_MSG( 2, ( "=> flush output" ) ); |
| |
| while( ssl->out_left > 0 ) |
| { |
| SSL_DEBUG_MSG( 2, ( "message length: %d, out_left: %d", |
| 5 + ssl->out_msglen, ssl->out_left ) ); |
| |
| buf = ssl->out_hdr + 5 + ssl->out_msglen - ssl->out_left; |
| ret = ssl->f_send( ssl->p_send, buf, ssl->out_left ); |
| |
| SSL_DEBUG_RET( 2, "ssl->f_send", ret ); |
| |
| if( ret <= 0 ) |
| return( ret ); |
| |
| ssl->out_left -= ret; |
| } |
| |
| SSL_DEBUG_MSG( 2, ( "<= flush output" ) ); |
| |
| return( 0 ); |
| } |
| |
| /* |
| * Record layer functions |
| */ |
| int ssl_write_record( ssl_context *ssl ) |
| { |
| int ret, done = 0; |
| size_t len = ssl->out_msglen; |
| |
| SSL_DEBUG_MSG( 2, ( "=> write record" ) ); |
| |
| if( ssl->out_msgtype == SSL_MSG_HANDSHAKE ) |
| { |
| ssl->out_msg[1] = (unsigned char)( ( len - 4 ) >> 16 ); |
| ssl->out_msg[2] = (unsigned char)( ( len - 4 ) >> 8 ); |
| ssl->out_msg[3] = (unsigned char)( ( len - 4 ) ); |
| |
| if( ssl->out_msg[0] != SSL_HS_HELLO_REQUEST ) |
| ssl->handshake->update_checksum( ssl, ssl->out_msg, len ); |
| } |
| |
| #if defined(POLARSSL_ZLIB_SUPPORT) |
| if( ssl->transform_out != NULL && |
| ssl->session_out->compression == SSL_COMPRESS_DEFLATE ) |
| { |
| if( ( ret = ssl_compress_buf( ssl ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "ssl_compress_buf", ret ); |
| return( ret ); |
| } |
| |
| len = ssl->out_msglen; |
| } |
| #endif /*POLARSSL_ZLIB_SUPPORT */ |
| |
| #if defined(POLARSSL_SSL_HW_RECORD_ACCEL) |
| if( ssl_hw_record_write != NULL) |
| { |
| SSL_DEBUG_MSG( 2, ( "going for ssl_hw_record_write()" ) ); |
| |
| ret = ssl_hw_record_write( ssl ); |
| if( ret != 0 && ret != POLARSSL_ERR_SSL_HW_ACCEL_FALLTHROUGH ) |
| { |
| SSL_DEBUG_RET( 1, "ssl_hw_record_write", ret ); |
| return POLARSSL_ERR_SSL_HW_ACCEL_FAILED; |
| } |
| |
| if( ret == 0 ) |
| done = 1; |
| } |
| #endif /* POLARSSL_SSL_HW_RECORD_ACCEL */ |
| if( !done ) |
| { |
| ssl->out_hdr[0] = (unsigned char) ssl->out_msgtype; |
| ssl->out_hdr[1] = (unsigned char) ssl->major_ver; |
| ssl->out_hdr[2] = (unsigned char) ssl->minor_ver; |
| ssl->out_hdr[3] = (unsigned char)( len >> 8 ); |
| ssl->out_hdr[4] = (unsigned char)( len ); |
| |
| if( ssl->transform_out != NULL ) |
| { |
| if( ( ret = ssl_encrypt_buf( ssl ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "ssl_encrypt_buf", ret ); |
| return( ret ); |
| } |
| |
| len = ssl->out_msglen; |
| ssl->out_hdr[3] = (unsigned char)( len >> 8 ); |
| ssl->out_hdr[4] = (unsigned char)( len ); |
| } |
| |
| ssl->out_left = 5 + ssl->out_msglen; |
| |
| SSL_DEBUG_MSG( 3, ( "output record: msgtype = %d, " |
| "version = [%d:%d], msglen = %d", |
| ssl->out_hdr[0], ssl->out_hdr[1], ssl->out_hdr[2], |
| ( ssl->out_hdr[3] << 8 ) | ssl->out_hdr[4] ) ); |
| |
| SSL_DEBUG_BUF( 4, "output record sent to network", |
| ssl->out_hdr, 5 + ssl->out_msglen ); |
| } |
| |
| if( ( ret = ssl_flush_output( ssl ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "ssl_flush_output", ret ); |
| return( ret ); |
| } |
| |
| SSL_DEBUG_MSG( 2, ( "<= write record" ) ); |
| |
| return( 0 ); |
| } |
| |
| int ssl_read_record( ssl_context *ssl ) |
| { |
| int ret, done = 0; |
| |
| SSL_DEBUG_MSG( 2, ( "=> read record" ) ); |
| |
| SSL_DEBUG_BUF( 4, "input record from network", |
| ssl->in_hdr, 5 + ssl->in_msglen ); |
| |
| if( ssl->in_hslen != 0 && |
| ssl->in_hslen < ssl->in_msglen ) |
| { |
| /* |
| * Get next Handshake message in the current record |
| */ |
| ssl->in_msglen -= ssl->in_hslen; |
| |
| memmove( ssl->in_msg, ssl->in_msg + ssl->in_hslen, |
| ssl->in_msglen ); |
| |
| ssl->in_hslen = 4; |
| ssl->in_hslen += ( ssl->in_msg[2] << 8 ) | ssl->in_msg[3]; |
| |
| SSL_DEBUG_MSG( 3, ( "handshake message: msglen =" |
| " %d, type = %d, hslen = %d", |
| ssl->in_msglen, ssl->in_msg[0], ssl->in_hslen ) ); |
| |
| if( ssl->in_msglen < 4 || ssl->in_msg[1] != 0 ) |
| { |
| SSL_DEBUG_MSG( 1, ( "bad handshake length" ) ); |
| return( POLARSSL_ERR_SSL_INVALID_RECORD ); |
| } |
| |
| if( ssl->in_msglen < ssl->in_hslen ) |
| { |
| SSL_DEBUG_MSG( 1, ( "bad handshake length" ) ); |
| return( POLARSSL_ERR_SSL_INVALID_RECORD ); |
| } |
| |
| if( ssl->state != SSL_HANDSHAKE_OVER ) |
| ssl->handshake->update_checksum( ssl, ssl->in_msg, ssl->in_hslen ); |
| |
| return( 0 ); |
| } |
| |
| ssl->in_hslen = 0; |
| |
| /* |
| * Read the record header and validate it |
| */ |
| if( ( ret = ssl_fetch_input( ssl, 5 ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "ssl_fetch_input", ret ); |
| return( ret ); |
| } |
| |
| ssl->in_msgtype = ssl->in_hdr[0]; |
| ssl->in_msglen = ( ssl->in_hdr[3] << 8 ) | ssl->in_hdr[4]; |
| |
| SSL_DEBUG_MSG( 3, ( "input record: msgtype = %d, " |
| "version = [%d:%d], msglen = %d", |
| ssl->in_hdr[0], ssl->in_hdr[1], ssl->in_hdr[2], |
| ( ssl->in_hdr[3] << 8 ) | ssl->in_hdr[4] ) ); |
| |
| if( ssl->in_hdr[1] != ssl->major_ver ) |
| { |
| SSL_DEBUG_MSG( 1, ( "major version mismatch" ) ); |
| return( POLARSSL_ERR_SSL_INVALID_RECORD ); |
| } |
| |
| if( ssl->in_hdr[2] > ssl->max_minor_ver ) |
| { |
| SSL_DEBUG_MSG( 1, ( "minor version mismatch" ) ); |
| return( POLARSSL_ERR_SSL_INVALID_RECORD ); |
| } |
| |
| /* Sanity check (outer boundaries) */ |
| if( ssl->in_msglen < 1 || ssl->in_msglen > SSL_BUFFER_LEN - 13 ) |
| { |
| SSL_DEBUG_MSG( 1, ( "bad message length" ) ); |
| return( POLARSSL_ERR_SSL_INVALID_RECORD ); |
| } |
| |
| /* |
| * Make sure the message length is acceptable for the current transform |
| * and protocol version. |
| */ |
| if( ssl->transform_in == NULL ) |
| { |
| if( ssl->in_msglen > SSL_MAX_CONTENT_LEN ) |
| { |
| SSL_DEBUG_MSG( 1, ( "bad message length" ) ); |
| return( POLARSSL_ERR_SSL_INVALID_RECORD ); |
| } |
| } |
| else |
| { |
| if( ssl->in_msglen < ssl->transform_in->minlen ) |
| { |
| SSL_DEBUG_MSG( 1, ( "bad message length" ) ); |
| return( POLARSSL_ERR_SSL_INVALID_RECORD ); |
| } |
| |
| #if defined(POLARSSL_SSL_PROTO_SSL3) |
| if( ssl->minor_ver == SSL_MINOR_VERSION_0 && |
| ssl->in_msglen > ssl->transform_in->minlen + SSL_MAX_CONTENT_LEN ) |
| { |
| SSL_DEBUG_MSG( 1, ( "bad message length" ) ); |
| return( POLARSSL_ERR_SSL_INVALID_RECORD ); |
| } |
| #endif |
| |
| #if defined(POLARSSL_SSL_PROTO_TLS1) || defined(POLARSSL_SSL_PROTO_TLS1_1) || \ |
| defined(POLARSSL_SSL_PROTO_TLS1_2) |
| /* |
| * TLS encrypted messages can have up to 256 bytes of padding |
| */ |
| if( ssl->minor_ver >= SSL_MINOR_VERSION_1 && |
| ssl->in_msglen > ssl->transform_in->minlen + |
| SSL_MAX_CONTENT_LEN + 256 ) |
| { |
| SSL_DEBUG_MSG( 1, ( "bad message length" ) ); |
| return( POLARSSL_ERR_SSL_INVALID_RECORD ); |
| } |
| #endif |
| } |
| |
| /* |
| * Read and optionally decrypt the message contents |
| */ |
| if( ( ret = ssl_fetch_input( ssl, 5 + ssl->in_msglen ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "ssl_fetch_input", ret ); |
| return( ret ); |
| } |
| |
| SSL_DEBUG_BUF( 4, "input record from network", |
| ssl->in_hdr, 5 + ssl->in_msglen ); |
| |
| #if defined(POLARSSL_SSL_HW_RECORD_ACCEL) |
| if( ssl_hw_record_read != NULL) |
| { |
| SSL_DEBUG_MSG( 2, ( "going for ssl_hw_record_read()" ) ); |
| |
| ret = ssl_hw_record_read( ssl ); |
| if( ret != 0 && ret != POLARSSL_ERR_SSL_HW_ACCEL_FALLTHROUGH ) |
| { |
| SSL_DEBUG_RET( 1, "ssl_hw_record_read", ret ); |
| return POLARSSL_ERR_SSL_HW_ACCEL_FAILED; |
| } |
| |
| if( ret == 0 ) |
| done = 1; |
| } |
| #endif /* POLARSSL_SSL_HW_RECORD_ACCEL */ |
| if( !done && ssl->transform_in != NULL ) |
| { |
| if( ( ret = ssl_decrypt_buf( ssl ) ) != 0 ) |
| { |
| #if defined(POLARSSL_SSL_ALERT_MESSAGES) |
| if( ret == POLARSSL_ERR_SSL_INVALID_MAC ) |
| { |
| ssl_send_alert_message( ssl, |
| SSL_ALERT_LEVEL_FATAL, |
| SSL_ALERT_MSG_BAD_RECORD_MAC ); |
| } |
| #endif |
| SSL_DEBUG_RET( 1, "ssl_decrypt_buf", ret ); |
| return( ret ); |
| } |
| |
| SSL_DEBUG_BUF( 4, "input payload after decrypt", |
| ssl->in_msg, ssl->in_msglen ); |
| |
| if( ssl->in_msglen > SSL_MAX_CONTENT_LEN ) |
| { |
| SSL_DEBUG_MSG( 1, ( "bad message length" ) ); |
| return( POLARSSL_ERR_SSL_INVALID_RECORD ); |
| } |
| } |
| |
| #if defined(POLARSSL_ZLIB_SUPPORT) |
| if( ssl->transform_in != NULL && |
| ssl->session_in->compression == SSL_COMPRESS_DEFLATE ) |
| { |
| if( ( ret = ssl_decompress_buf( ssl ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "ssl_decompress_buf", ret ); |
| return( ret ); |
| } |
| |
| ssl->in_hdr[3] = (unsigned char)( ssl->in_msglen >> 8 ); |
| ssl->in_hdr[4] = (unsigned char)( ssl->in_msglen ); |
| } |
| #endif /* POLARSSL_ZLIB_SUPPORT */ |
| |
| if( ssl->in_msgtype != SSL_MSG_HANDSHAKE && |
| ssl->in_msgtype != SSL_MSG_ALERT && |
| ssl->in_msgtype != SSL_MSG_CHANGE_CIPHER_SPEC && |
| ssl->in_msgtype != SSL_MSG_APPLICATION_DATA ) |
| { |
| SSL_DEBUG_MSG( 1, ( "unknown record type" ) ); |
| |
| if( ( ret = ssl_send_alert_message( ssl, |
| SSL_ALERT_LEVEL_FATAL, |
| SSL_ALERT_MSG_UNEXPECTED_MESSAGE ) ) != 0 ) |
| { |
| return( ret ); |
| } |
| |
| return( POLARSSL_ERR_SSL_INVALID_RECORD ); |
| } |
| |
| if( ssl->in_msgtype == SSL_MSG_HANDSHAKE ) |
| { |
| ssl->in_hslen = 4; |
| ssl->in_hslen += ( ssl->in_msg[2] << 8 ) | ssl->in_msg[3]; |
| |
| SSL_DEBUG_MSG( 3, ( "handshake message: msglen =" |
| " %d, type = %d, hslen = %d", |
| ssl->in_msglen, ssl->in_msg[0], ssl->in_hslen ) ); |
| |
| /* |
| * Additional checks to validate the handshake header |
| */ |
| if( ssl->in_msglen < 4 || ssl->in_msg[1] != 0 ) |
| { |
| SSL_DEBUG_MSG( 1, ( "bad handshake length" ) ); |
| return( POLARSSL_ERR_SSL_INVALID_RECORD ); |
| } |
| |
| if( ssl->in_msglen < ssl->in_hslen ) |
| { |
| SSL_DEBUG_MSG( 1, ( "bad handshake length" ) ); |
| return( POLARSSL_ERR_SSL_INVALID_RECORD ); |
| } |
| |
| if( ssl->state != SSL_HANDSHAKE_OVER ) |
| ssl->handshake->update_checksum( ssl, ssl->in_msg, ssl->in_hslen ); |
| } |
| |
| if( ssl->in_msgtype == SSL_MSG_ALERT ) |
| { |
| SSL_DEBUG_MSG( 2, ( "got an alert message, type: [%d:%d]", |
| ssl->in_msg[0], ssl->in_msg[1] ) ); |
| |
| /* |
| * Ignore non-fatal alerts, except close_notify |
| */ |
| if( ssl->in_msg[0] == SSL_ALERT_LEVEL_FATAL ) |
| { |
| SSL_DEBUG_MSG( 1, ( "is a fatal alert message (msg %d)", |
| ssl->in_msg[1] ) ); |
| /** |
| * Subtract from error code as ssl->in_msg[1] is 7-bit positive |
| * error identifier. |
| */ |
| return( POLARSSL_ERR_SSL_FATAL_ALERT_MESSAGE ); |
| } |
| |
| if( ssl->in_msg[0] == SSL_ALERT_LEVEL_WARNING && |
| ssl->in_msg[1] == SSL_ALERT_MSG_CLOSE_NOTIFY ) |
| { |
| SSL_DEBUG_MSG( 2, ( "is a close notify message" ) ); |
| return( POLARSSL_ERR_SSL_PEER_CLOSE_NOTIFY ); |
| } |
| } |
| |
| ssl->in_left = 0; |
| |
| SSL_DEBUG_MSG( 2, ( "<= read record" ) ); |
| |
| return( 0 ); |
| } |
| |
| int ssl_send_fatal_handshake_failure( ssl_context *ssl ) |
| { |
| int ret; |
| |
| if( ( ret = ssl_send_alert_message( ssl, |
| SSL_ALERT_LEVEL_FATAL, |
| SSL_ALERT_MSG_HANDSHAKE_FAILURE ) ) != 0 ) |
| { |
| return( ret ); |
| } |
| |
| return( 0 ); |
| } |
| |
| int ssl_send_alert_message( ssl_context *ssl, |
| unsigned char level, |
| unsigned char message ) |
| { |
| int ret; |
| |
| SSL_DEBUG_MSG( 2, ( "=> send alert message" ) ); |
| |
| ssl->out_msgtype = SSL_MSG_ALERT; |
| ssl->out_msglen = 2; |
| ssl->out_msg[0] = level; |
| ssl->out_msg[1] = message; |
| |
| if( ( ret = ssl_write_record( ssl ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "ssl_write_record", ret ); |
| return( ret ); |
| } |
| |
| SSL_DEBUG_MSG( 2, ( "<= send alert message" ) ); |
| |
| return( 0 ); |
| } |
| |
| /* |
| * Handshake functions |
| */ |
| #if !defined(POLARSSL_KEY_EXCHANGE_RSA_ENABLED) && \ |
| !defined(POLARSSL_KEY_EXCHANGE_RSA_PSK_ENABLED) && \ |
| !defined(POLARSSL_KEY_EXCHANGE_DHE_RSA_ENABLED) && \ |
| !defined(POLARSSL_KEY_EXCHANGE_ECDHE_RSA_ENABLED) && \ |
| !defined(POLARSSL_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED) && \ |
| !defined(POLARSSL_KEY_EXCHANGE_ECDH_RSA_ENABLED) && \ |
| !defined(POLARSSL_KEY_EXCHANGE_ECDH_ECDSA_ENABLED) |
| int ssl_write_certificate( ssl_context *ssl ) |
| { |
| const ssl_ciphersuite_t *ciphersuite_info = ssl->transform_negotiate->ciphersuite_info; |
| |
| SSL_DEBUG_MSG( 2, ( "=> write certificate" ) ); |
| |
| if( ciphersuite_info->key_exchange == POLARSSL_KEY_EXCHANGE_PSK || |
| ciphersuite_info->key_exchange == POLARSSL_KEY_EXCHANGE_DHE_PSK || |
| ciphersuite_info->key_exchange == POLARSSL_KEY_EXCHANGE_ECDHE_PSK ) |
| { |
| SSL_DEBUG_MSG( 2, ( "<= skip write certificate" ) ); |
| ssl->state++; |
| return( 0 ); |
| } |
| |
| SSL_DEBUG_MSG( 1, ( "should never happen" ) ); |
| return( POLARSSL_ERR_SSL_INTERNAL_ERROR ); |
| } |
| |
| int ssl_parse_certificate( ssl_context *ssl ) |
| { |
| const ssl_ciphersuite_t *ciphersuite_info = ssl->transform_negotiate->ciphersuite_info; |
| |
| SSL_DEBUG_MSG( 2, ( "=> parse certificate" ) ); |
| |
| if( ciphersuite_info->key_exchange == POLARSSL_KEY_EXCHANGE_PSK || |
| ciphersuite_info->key_exchange == POLARSSL_KEY_EXCHANGE_DHE_PSK || |
| ciphersuite_info->key_exchange == POLARSSL_KEY_EXCHANGE_ECDHE_PSK ) |
| { |
| SSL_DEBUG_MSG( 2, ( "<= skip parse certificate" ) ); |
| ssl->state++; |
| return( 0 ); |
| } |
| |
| SSL_DEBUG_MSG( 1, ( "should never happen" ) ); |
| return( POLARSSL_ERR_SSL_INTERNAL_ERROR ); |
| } |
| #else |
| int ssl_write_certificate( ssl_context *ssl ) |
| { |
| int ret = POLARSSL_ERR_SSL_FEATURE_UNAVAILABLE; |
| size_t i, n; |
| const x509_crt *crt; |
| const ssl_ciphersuite_t *ciphersuite_info = ssl->transform_negotiate->ciphersuite_info; |
| |
| SSL_DEBUG_MSG( 2, ( "=> write certificate" ) ); |
| |
| if( ciphersuite_info->key_exchange == POLARSSL_KEY_EXCHANGE_PSK || |
| ciphersuite_info->key_exchange == POLARSSL_KEY_EXCHANGE_DHE_PSK || |
| ciphersuite_info->key_exchange == POLARSSL_KEY_EXCHANGE_ECDHE_PSK ) |
| { |
| SSL_DEBUG_MSG( 2, ( "<= skip write certificate" ) ); |
| ssl->state++; |
| return( 0 ); |
| } |
| |
| if( ssl->endpoint == SSL_IS_CLIENT ) |
| { |
| if( ssl->client_auth == 0 ) |
| { |
| SSL_DEBUG_MSG( 2, ( "<= skip write certificate" ) ); |
| ssl->state++; |
| return( 0 ); |
| } |
| |
| #if defined(POLARSSL_SSL_PROTO_SSL3) |
| /* |
| * If using SSLv3 and got no cert, send an Alert message |
| * (otherwise an empty Certificate message will be sent). |
| */ |
| if( ssl_own_cert( ssl ) == NULL && |
| ssl->minor_ver == SSL_MINOR_VERSION_0 ) |
| { |
| ssl->out_msglen = 2; |
| ssl->out_msgtype = SSL_MSG_ALERT; |
| ssl->out_msg[0] = SSL_ALERT_LEVEL_WARNING; |
| ssl->out_msg[1] = SSL_ALERT_MSG_NO_CERT; |
| |
| SSL_DEBUG_MSG( 2, ( "got no certificate to send" ) ); |
| goto write_msg; |
| } |
| #endif /* POLARSSL_SSL_PROTO_SSL3 */ |
| } |
| else /* SSL_IS_SERVER */ |
| { |
| if( ssl_own_cert( ssl ) == NULL ) |
| { |
| SSL_DEBUG_MSG( 1, ( "got no certificate to send" ) ); |
| return( POLARSSL_ERR_SSL_CERTIFICATE_REQUIRED ); |
| } |
| } |
| |
| SSL_DEBUG_CRT( 3, "own certificate", ssl_own_cert( ssl ) ); |
| |
| /* |
| * 0 . 0 handshake type |
| * 1 . 3 handshake length |
| * 4 . 6 length of all certs |
| * 7 . 9 length of cert. 1 |
| * 10 . n-1 peer certificate |
| * n . n+2 length of cert. 2 |
| * n+3 . ... upper level cert, etc. |
| */ |
| i = 7; |
| crt = ssl_own_cert( ssl ); |
| |
| while( crt != NULL ) |
| { |
| n = crt->raw.len; |
| if( n > SSL_MAX_CONTENT_LEN - 3 - i ) |
| { |
| SSL_DEBUG_MSG( 1, ( "certificate too large, %d > %d", |
| i + 3 + n, SSL_MAX_CONTENT_LEN ) ); |
| return( POLARSSL_ERR_SSL_CERTIFICATE_TOO_LARGE ); |
| } |
| |
| ssl->out_msg[i ] = (unsigned char)( n >> 16 ); |
| ssl->out_msg[i + 1] = (unsigned char)( n >> 8 ); |
| ssl->out_msg[i + 2] = (unsigned char)( n ); |
| |
| i += 3; memcpy( ssl->out_msg + i, crt->raw.p, n ); |
| i += n; crt = crt->next; |
| } |
| |
| ssl->out_msg[4] = (unsigned char)( ( i - 7 ) >> 16 ); |
| ssl->out_msg[5] = (unsigned char)( ( i - 7 ) >> 8 ); |
| ssl->out_msg[6] = (unsigned char)( ( i - 7 ) ); |
| |
| ssl->out_msglen = i; |
| ssl->out_msgtype = SSL_MSG_HANDSHAKE; |
| ssl->out_msg[0] = SSL_HS_CERTIFICATE; |
| |
| #if defined(POLARSSL_SSL_PROTO_SSL3) |
| write_msg: |
| #endif |
| |
| ssl->state++; |
| |
| if( ( ret = ssl_write_record( ssl ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "ssl_write_record", ret ); |
| return( ret ); |
| } |
| |
| SSL_DEBUG_MSG( 2, ( "<= write certificate" ) ); |
| |
| return( ret ); |
| } |
| |
| int ssl_parse_certificate( ssl_context *ssl ) |
| { |
| int ret = POLARSSL_ERR_SSL_FEATURE_UNAVAILABLE; |
| size_t i, n; |
| const ssl_ciphersuite_t *ciphersuite_info = ssl->transform_negotiate->ciphersuite_info; |
| |
| SSL_DEBUG_MSG( 2, ( "=> parse certificate" ) ); |
| |
| if( ciphersuite_info->key_exchange == POLARSSL_KEY_EXCHANGE_PSK || |
| ciphersuite_info->key_exchange == POLARSSL_KEY_EXCHANGE_DHE_PSK || |
| ciphersuite_info->key_exchange == POLARSSL_KEY_EXCHANGE_ECDHE_PSK ) |
| { |
| SSL_DEBUG_MSG( 2, ( "<= skip parse certificate" ) ); |
| ssl->state++; |
| return( 0 ); |
| } |
| |
| if( ssl->endpoint == SSL_IS_SERVER && |
| ( ssl->authmode == SSL_VERIFY_NONE || |
| ciphersuite_info->key_exchange == POLARSSL_KEY_EXCHANGE_RSA_PSK ) ) |
| { |
| ssl->session_negotiate->verify_result = BADCERT_SKIP_VERIFY; |
| SSL_DEBUG_MSG( 2, ( "<= skip parse certificate" ) ); |
| ssl->state++; |
| return( 0 ); |
| } |
| |
| if( ( ret = ssl_read_record( ssl ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "ssl_read_record", ret ); |
| return( ret ); |
| } |
| |
| ssl->state++; |
| |
| #if defined(POLARSSL_SSL_PROTO_SSL3) |
| /* |
| * Check if the client sent an empty certificate |
| */ |
| if( ssl->endpoint == SSL_IS_SERVER && |
| ssl->minor_ver == SSL_MINOR_VERSION_0 ) |
| { |
| if( ssl->in_msglen == 2 && |
| ssl->in_msgtype == SSL_MSG_ALERT && |
| ssl->in_msg[0] == SSL_ALERT_LEVEL_WARNING && |
| ssl->in_msg[1] == SSL_ALERT_MSG_NO_CERT ) |
| { |
| SSL_DEBUG_MSG( 1, ( "SSLv3 client has no certificate" ) ); |
| |
| ssl->session_negotiate->verify_result = BADCERT_MISSING; |
| if( ssl->authmode == SSL_VERIFY_OPTIONAL ) |
| return( 0 ); |
| else |
| return( POLARSSL_ERR_SSL_NO_CLIENT_CERTIFICATE ); |
| } |
| } |
| #endif /* POLARSSL_SSL_PROTO_SSL3 */ |
| |
| #if defined(POLARSSL_SSL_PROTO_TLS1) || defined(POLARSSL_SSL_PROTO_TLS1_1) || \ |
| defined(POLARSSL_SSL_PROTO_TLS1_2) |
| if( ssl->endpoint == SSL_IS_SERVER && |
| ssl->minor_ver != SSL_MINOR_VERSION_0 ) |
| { |
| if( ssl->in_hslen == 7 && |
| ssl->in_msgtype == SSL_MSG_HANDSHAKE && |
| ssl->in_msg[0] == SSL_HS_CERTIFICATE && |
| memcmp( ssl->in_msg + 4, "\0\0\0", 3 ) == 0 ) |
| { |
| SSL_DEBUG_MSG( 1, ( "TLSv1 client has no certificate" ) ); |
| |
| ssl->session_negotiate->verify_result = BADCERT_MISSING; |
| if( ssl->authmode == SSL_VERIFY_REQUIRED ) |
| return( POLARSSL_ERR_SSL_NO_CLIENT_CERTIFICATE ); |
| else |
| return( 0 ); |
| } |
| } |
| #endif /* POLARSSL_SSL_PROTO_TLS1 || POLARSSL_SSL_PROTO_TLS1_1 || \ |
| POLARSSL_SSL_PROTO_TLS1_2 */ |
| |
| if( ssl->in_msgtype != SSL_MSG_HANDSHAKE ) |
| { |
| SSL_DEBUG_MSG( 1, ( "bad certificate message" ) ); |
| return( POLARSSL_ERR_SSL_UNEXPECTED_MESSAGE ); |
| } |
| |
| if( ssl->in_msg[0] != SSL_HS_CERTIFICATE || ssl->in_hslen < 10 ) |
| { |
| SSL_DEBUG_MSG( 1, ( "bad certificate message" ) ); |
| return( POLARSSL_ERR_SSL_BAD_HS_CERTIFICATE ); |
| } |
| |
| /* |
| * Same message structure as in ssl_write_certificate() |
| */ |
| n = ( ssl->in_msg[5] << 8 ) | ssl->in_msg[6]; |
| |
| if( ssl->in_msg[4] != 0 || ssl->in_hslen != 7 + n ) |
| { |
| SSL_DEBUG_MSG( 1, ( "bad certificate message" ) ); |
| return( POLARSSL_ERR_SSL_BAD_HS_CERTIFICATE ); |
| } |
| |
| /* In case we tried to reuse a session but it failed */ |
| if( ssl->session_negotiate->peer_cert != NULL ) |
| { |
| x509_crt_free( ssl->session_negotiate->peer_cert ); |
| polarssl_free( ssl->session_negotiate->peer_cert ); |
| } |
| |
| if( ( ssl->session_negotiate->peer_cert = (x509_crt *) polarssl_malloc( |
| sizeof( x509_crt ) ) ) == NULL ) |
| { |
| SSL_DEBUG_MSG( 1, ( "malloc(%d bytes) failed", |
| sizeof( x509_crt ) ) ); |
| return( POLARSSL_ERR_SSL_MALLOC_FAILED ); |
| } |
| |
| x509_crt_init( ssl->session_negotiate->peer_cert ); |
| |
| i = 7; |
| |
| while( i < ssl->in_hslen ) |
| { |
| if( ssl->in_msg[i] != 0 ) |
| { |
| SSL_DEBUG_MSG( 1, ( "bad certificate message" ) ); |
| return( POLARSSL_ERR_SSL_BAD_HS_CERTIFICATE ); |
| } |
| |
| n = ( (unsigned int) ssl->in_msg[i + 1] << 8 ) |
| | (unsigned int) ssl->in_msg[i + 2]; |
| i += 3; |
| |
| if( n < 128 || i + n > ssl->in_hslen ) |
| { |
| SSL_DEBUG_MSG( 1, ( "bad certificate message" ) ); |
| return( POLARSSL_ERR_SSL_BAD_HS_CERTIFICATE ); |
| } |
| |
| ret = x509_crt_parse_der( ssl->session_negotiate->peer_cert, |
| ssl->in_msg + i, n ); |
| if( ret != 0 ) |
| { |
| SSL_DEBUG_RET( 1, " x509_crt_parse_der", ret ); |
| return( ret ); |
| } |
| |
| i += n; |
| } |
| |
| SSL_DEBUG_CRT( 3, "peer certificate", ssl->session_negotiate->peer_cert ); |
| |
| /* |
| * On client, make sure the server cert doesn't change during renego to |
| * avoid "triple handshake" attack: https://secure-resumption.com/ |
| */ |
| if( ssl->endpoint == SSL_IS_CLIENT && |
| ssl->renegotiation == SSL_RENEGOTIATION ) |
| { |
| if( ssl->session->peer_cert == NULL ) |
| { |
| SSL_DEBUG_MSG( 1, ( "new server cert during renegotiation" ) ); |
| return( POLARSSL_ERR_SSL_BAD_HS_CERTIFICATE ); |
| } |
| |
| if( ssl->session->peer_cert->raw.len != |
| ssl->session_negotiate->peer_cert->raw.len || |
| memcmp( ssl->session->peer_cert->raw.p, |
| ssl->session_negotiate->peer_cert->raw.p, |
| ssl->session->peer_cert->raw.len ) != 0 ) |
| { |
| SSL_DEBUG_MSG( 1, ( "server cert changed during renegotiation" ) ); |
| return( POLARSSL_ERR_SSL_BAD_HS_CERTIFICATE ); |
| } |
| } |
| |
| if( ssl->authmode != SSL_VERIFY_NONE ) |
| { |
| if( ssl->ca_chain == NULL ) |
| { |
| SSL_DEBUG_MSG( 1, ( "got no CA chain" ) ); |
| return( POLARSSL_ERR_SSL_CA_CHAIN_REQUIRED ); |
| } |
| |
| /* |
| * Main check: verify certificate |
| */ |
| ret = x509_crt_verify( ssl->session_negotiate->peer_cert, |
| ssl->ca_chain, ssl->ca_crl, ssl->peer_cn, |
| &ssl->session_negotiate->verify_result, |
| ssl->f_vrfy, ssl->p_vrfy ); |
| |
| if( ret != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "x509_verify_cert", ret ); |
| } |
| |
| /* |
| * Secondary checks: always done, but change 'ret' only if it was 0 |
| */ |
| |
| #if defined(POLARSSL_SSL_SET_CURVES) |
| { |
| pk_context *pk = &ssl->session_negotiate->peer_cert->pk; |
| |
| /* If certificate uses an EC key, make sure the curve is OK */ |
| if( pk_can_do( pk, POLARSSL_PK_ECKEY ) && |
| ! ssl_curve_is_acceptable( ssl, pk_ec( *pk )->grp.id ) ) |
| { |
| SSL_DEBUG_MSG( 1, ( "bad certificate (EC key curve)" ) ); |
| if( ret == 0 ) |
| ret = POLARSSL_ERR_SSL_BAD_HS_CERTIFICATE; |
| } |
| } |
| #endif /* POLARSSL_SSL_SET_CURVES */ |
| |
| if( ssl_check_cert_usage( ssl->session_negotiate->peer_cert, |
| ciphersuite_info, |
| ! ssl->endpoint ) != 0 ) |
| { |
| SSL_DEBUG_MSG( 1, ( "bad certificate (usage extensions)" ) ); |
| if( ret == 0 ) |
| ret = POLARSSL_ERR_SSL_BAD_HS_CERTIFICATE; |
| } |
| |
| if( ssl->authmode != SSL_VERIFY_REQUIRED ) |
| ret = 0; |
| } |
| |
| SSL_DEBUG_MSG( 2, ( "<= parse certificate" ) ); |
| |
| return( ret ); |
| } |
| #endif /* !POLARSSL_KEY_EXCHANGE_RSA_ENABLED |
| !POLARSSL_KEY_EXCHANGE_RSA_PSK_ENABLED |
| !POLARSSL_KEY_EXCHANGE_DHE_RSA_ENABLED |
| !POLARSSL_KEY_EXCHANGE_ECDHE_RSA_ENABLED |
| !POLARSSL_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED |
| !POLARSSL_KEY_EXCHANGE_ECDH_RSA_ENABLED |
| !POLARSSL_KEY_EXCHANGE_ECDH_ECDSA_ENABLED */ |
| |
| int ssl_write_change_cipher_spec( ssl_context *ssl ) |
| { |
| int ret; |
| |
| SSL_DEBUG_MSG( 2, ( "=> write change cipher spec" ) ); |
| |
| ssl->out_msgtype = SSL_MSG_CHANGE_CIPHER_SPEC; |
| ssl->out_msglen = 1; |
| ssl->out_msg[0] = 1; |
| |
| ssl->state++; |
| |
| if( ( ret = ssl_write_record( ssl ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "ssl_write_record", ret ); |
| return( ret ); |
| } |
| |
| SSL_DEBUG_MSG( 2, ( "<= write change cipher spec" ) ); |
| |
| return( 0 ); |
| } |
| |
| int ssl_parse_change_cipher_spec( ssl_context *ssl ) |
| { |
| int ret; |
| |
| SSL_DEBUG_MSG( 2, ( "=> parse change cipher spec" ) ); |
| |
| if( ( ret = ssl_read_record( ssl ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "ssl_read_record", ret ); |
| return( ret ); |
| } |
| |
| if( ssl->in_msgtype != SSL_MSG_CHANGE_CIPHER_SPEC ) |
| { |
| SSL_DEBUG_MSG( 1, ( "bad change cipher spec message" ) ); |
| return( POLARSSL_ERR_SSL_UNEXPECTED_MESSAGE ); |
| } |
| |
| if( ssl->in_msglen != 1 || ssl->in_msg[0] != 1 ) |
| { |
| SSL_DEBUG_MSG( 1, ( "bad change cipher spec message" ) ); |
| return( POLARSSL_ERR_SSL_BAD_HS_CHANGE_CIPHER_SPEC ); |
| } |
| |
| ssl->state++; |
| |
| SSL_DEBUG_MSG( 2, ( "<= parse change cipher spec" ) ); |
| |
| return( 0 ); |
| } |
| |
| void ssl_optimize_checksum( ssl_context *ssl, |
| const ssl_ciphersuite_t *ciphersuite_info ) |
| { |
| ((void) ciphersuite_info); |
| |
| #if defined(POLARSSL_SSL_PROTO_SSL3) || defined(POLARSSL_SSL_PROTO_TLS1) || \ |
| defined(POLARSSL_SSL_PROTO_TLS1_1) |
| if( ssl->minor_ver < SSL_MINOR_VERSION_3 ) |
| ssl->handshake->update_checksum = ssl_update_checksum_md5sha1; |
| else |
| #endif |
| #if defined(POLARSSL_SSL_PROTO_TLS1_2) |
| #if defined(POLARSSL_SHA512_C) |
| if( ciphersuite_info->mac == POLARSSL_MD_SHA384 ) |
| ssl->handshake->update_checksum = ssl_update_checksum_sha384; |
| else |
| #endif |
| #if defined(POLARSSL_SHA256_C) |
| if( ciphersuite_info->mac != POLARSSL_MD_SHA384 ) |
| ssl->handshake->update_checksum = ssl_update_checksum_sha256; |
| else |
| #endif |
| #endif /* POLARSSL_SSL_PROTO_TLS1_2 */ |
| { |
| SSL_DEBUG_MSG( 1, ( "should never happen" ) ); |
| return; |
| } |
| } |
| |
| static void ssl_update_checksum_start( ssl_context *ssl, |
| const unsigned char *buf, size_t len ) |
| { |
| #if defined(POLARSSL_SSL_PROTO_SSL3) || defined(POLARSSL_SSL_PROTO_TLS1) || \ |
| defined(POLARSSL_SSL_PROTO_TLS1_1) |
| md5_update( &ssl->handshake->fin_md5 , buf, len ); |
| sha1_update( &ssl->handshake->fin_sha1, buf, len ); |
| #endif |
| #if defined(POLARSSL_SSL_PROTO_TLS1_2) |
| #if defined(POLARSSL_SHA256_C) |
| sha256_update( &ssl->handshake->fin_sha256, buf, len ); |
| #endif |
| #if defined(POLARSSL_SHA512_C) |
| sha512_update( &ssl->handshake->fin_sha512, buf, len ); |
| #endif |
| #endif /* POLARSSL_SSL_PROTO_TLS1_2 */ |
| } |
| |
| #if defined(POLARSSL_SSL_PROTO_SSL3) || defined(POLARSSL_SSL_PROTO_TLS1) || \ |
| defined(POLARSSL_SSL_PROTO_TLS1_1) |
| static void ssl_update_checksum_md5sha1( ssl_context *ssl, |
| const unsigned char *buf, size_t len ) |
| { |
| md5_update( &ssl->handshake->fin_md5 , buf, len ); |
| sha1_update( &ssl->handshake->fin_sha1, buf, len ); |
| } |
| #endif |
| |
| #if defined(POLARSSL_SSL_PROTO_TLS1_2) |
| #if defined(POLARSSL_SHA256_C) |
| static void ssl_update_checksum_sha256( ssl_context *ssl, |
| const unsigned char *buf, size_t len ) |
| { |
| sha256_update( &ssl->handshake->fin_sha256, buf, len ); |
| } |
| #endif |
| |
| #if defined(POLARSSL_SHA512_C) |
| static void ssl_update_checksum_sha384( ssl_context *ssl, |
| const unsigned char *buf, size_t len ) |
| { |
| sha512_update( &ssl->handshake->fin_sha512, buf, len ); |
| } |
| #endif |
| #endif /* POLARSSL_SSL_PROTO_TLS1_2 */ |
| |
| #if defined(POLARSSL_SSL_PROTO_SSL3) |
| static void ssl_calc_finished_ssl( |
| ssl_context *ssl, unsigned char *buf, int from ) |
| { |
| const char *sender; |
| md5_context md5; |
| sha1_context sha1; |
| |
| unsigned char padbuf[48]; |
| unsigned char md5sum[16]; |
| unsigned char sha1sum[20]; |
| |
| ssl_session *session = ssl->session_negotiate; |
| if( !session ) |
| session = ssl->session; |
| |
| SSL_DEBUG_MSG( 2, ( "=> calc finished ssl" ) ); |
| |
| memcpy( &md5 , &ssl->handshake->fin_md5 , sizeof(md5_context) ); |
| memcpy( &sha1, &ssl->handshake->fin_sha1, sizeof(sha1_context) ); |
| |
| /* |
| * SSLv3: |
| * hash = |
| * MD5( master + pad2 + |
| * MD5( handshake + sender + master + pad1 ) ) |
| * + SHA1( master + pad2 + |
| * SHA1( handshake + sender + master + pad1 ) ) |
| */ |
| |
| #if !defined(POLARSSL_MD5_ALT) |
| SSL_DEBUG_BUF( 4, "finished md5 state", (unsigned char *) |
| md5.state, sizeof( md5.state ) ); |
| #endif |
| |
| #if !defined(POLARSSL_SHA1_ALT) |
| SSL_DEBUG_BUF( 4, "finished sha1 state", (unsigned char *) |
| sha1.state, sizeof( sha1.state ) ); |
| #endif |
| |
| sender = ( from == SSL_IS_CLIENT ) ? "CLNT" |
| : "SRVR"; |
| |
| memset( padbuf, 0x36, 48 ); |
| |
| md5_update( &md5, (const unsigned char *) sender, 4 ); |
| md5_update( &md5, session->master, 48 ); |
| md5_update( &md5, padbuf, 48 ); |
| md5_finish( &md5, md5sum ); |
| |
| sha1_update( &sha1, (const unsigned char *) sender, 4 ); |
| sha1_update( &sha1, session->master, 48 ); |
| sha1_update( &sha1, padbuf, 40 ); |
| sha1_finish( &sha1, sha1sum ); |
| |
| memset( padbuf, 0x5C, 48 ); |
| |
| md5_starts( &md5 ); |
| md5_update( &md5, session->master, 48 ); |
| md5_update( &md5, padbuf, 48 ); |
| md5_update( &md5, md5sum, 16 ); |
| md5_finish( &md5, buf ); |
| |
| sha1_starts( &sha1 ); |
| sha1_update( &sha1, session->master, 48 ); |
| sha1_update( &sha1, padbuf , 40 ); |
| sha1_update( &sha1, sha1sum, 20 ); |
| sha1_finish( &sha1, buf + 16 ); |
| |
| SSL_DEBUG_BUF( 3, "calc finished result", buf, 36 ); |
| |
| memset( &md5, 0, sizeof( md5_context ) ); |
| memset( &sha1, 0, sizeof( sha1_context ) ); |
| |
| memset( padbuf, 0, sizeof( padbuf ) ); |
| memset( md5sum, 0, sizeof( md5sum ) ); |
| memset( sha1sum, 0, sizeof( sha1sum ) ); |
| |
| SSL_DEBUG_MSG( 2, ( "<= calc finished" ) ); |
| } |
| #endif /* POLARSSL_SSL_PROTO_SSL3 */ |
| |
| #if defined(POLARSSL_SSL_PROTO_TLS1) || defined(POLARSSL_SSL_PROTO_TLS1_1) |
| static void ssl_calc_finished_tls( |
| ssl_context *ssl, unsigned char *buf, int from ) |
| { |
| int len = 12; |
| const char *sender; |
| md5_context md5; |
| sha1_context sha1; |
| unsigned char padbuf[36]; |
| |
| ssl_session *session = ssl->session_negotiate; |
| if( !session ) |
| session = ssl->session; |
| |
| SSL_DEBUG_MSG( 2, ( "=> calc finished tls" ) ); |
| |
| memcpy( &md5 , &ssl->handshake->fin_md5 , sizeof(md5_context) ); |
| memcpy( &sha1, &ssl->handshake->fin_sha1, sizeof(sha1_context) ); |
| |
| /* |
| * TLSv1: |
| * hash = PRF( master, finished_label, |
| * MD5( handshake ) + SHA1( handshake ) )[0..11] |
| */ |
| |
| #if !defined(POLARSSL_MD5_ALT) |
| SSL_DEBUG_BUF( 4, "finished md5 state", (unsigned char *) |
| md5.state, sizeof( md5.state ) ); |
| #endif |
| |
| #if !defined(POLARSSL_SHA1_ALT) |
| SSL_DEBUG_BUF( 4, "finished sha1 state", (unsigned char *) |
| sha1.state, sizeof( sha1.state ) ); |
| #endif |
| |
| sender = ( from == SSL_IS_CLIENT ) |
| ? "client finished" |
| : "server finished"; |
| |
| md5_finish( &md5, padbuf ); |
| sha1_finish( &sha1, padbuf + 16 ); |
| |
| ssl->handshake->tls_prf( session->master, 48, sender, |
| padbuf, 36, buf, len ); |
| |
| SSL_DEBUG_BUF( 3, "calc finished result", buf, len ); |
| |
| memset( &md5, 0, sizeof( md5_context ) ); |
| memset( &sha1, 0, sizeof( sha1_context ) ); |
| |
| memset( padbuf, 0, sizeof( padbuf ) ); |
| |
| SSL_DEBUG_MSG( 2, ( "<= calc finished" ) ); |
| } |
| #endif /* POLARSSL_SSL_PROTO_TLS1 || POLARSSL_SSL_PROTO_TLS1_1 */ |
| |
| #if defined(POLARSSL_SSL_PROTO_TLS1_2) |
| #if defined(POLARSSL_SHA256_C) |
| static void ssl_calc_finished_tls_sha256( |
| ssl_context *ssl, unsigned char *buf, int from ) |
| { |
| int len = 12; |
| const char *sender; |
| sha256_context sha256; |
| unsigned char padbuf[32]; |
| |
| ssl_session *session = ssl->session_negotiate; |
| if( !session ) |
| session = ssl->session; |
| |
| SSL_DEBUG_MSG( 2, ( "=> calc finished tls sha256" ) ); |
| |
| memcpy( &sha256, &ssl->handshake->fin_sha256, sizeof(sha256_context) ); |
| |
| /* |
| * TLSv1.2: |
| * hash = PRF( master, finished_label, |
| * Hash( handshake ) )[0.11] |
| */ |
| |
| #if !defined(POLARSSL_SHA256_ALT) |
| SSL_DEBUG_BUF( 4, "finished sha2 state", (unsigned char *) |
| sha256.state, sizeof( sha256.state ) ); |
| #endif |
| |
| sender = ( from == SSL_IS_CLIENT ) |
| ? "client finished" |
| : "server finished"; |
| |
| sha256_finish( &sha256, padbuf ); |
| |
| ssl->handshake->tls_prf( session->master, 48, sender, |
| padbuf, 32, buf, len ); |
| |
| SSL_DEBUG_BUF( 3, "calc finished result", buf, len ); |
| |
| memset( &sha256, 0, sizeof( sha256_context ) ); |
| |
| memset( padbuf, 0, sizeof( padbuf ) ); |
| |
| SSL_DEBUG_MSG( 2, ( "<= calc finished" ) ); |
| } |
| #endif /* POLARSSL_SHA256_C */ |
| |
| #if defined(POLARSSL_SHA512_C) |
| static void ssl_calc_finished_tls_sha384( |
| ssl_context *ssl, unsigned char *buf, int from ) |
| { |
| int len = 12; |
| const char *sender; |
| sha512_context sha512; |
| unsigned char padbuf[48]; |
| |
| ssl_session *session = ssl->session_negotiate; |
| if( !session ) |
| session = ssl->session; |
| |
| SSL_DEBUG_MSG( 2, ( "=> calc finished tls sha384" ) ); |
| |
| memcpy( &sha512, &ssl->handshake->fin_sha512, sizeof(sha512_context) ); |
| |
| /* |
| * TLSv1.2: |
| * hash = PRF( master, finished_label, |
| * Hash( handshake ) )[0.11] |
| */ |
| |
| #if !defined(POLARSSL_SHA512_ALT) |
| SSL_DEBUG_BUF( 4, "finished sha512 state", (unsigned char *) |
| sha512.state, sizeof( sha512.state ) ); |
| #endif |
| |
| sender = ( from == SSL_IS_CLIENT ) |
| ? "client finished" |
| : "server finished"; |
| |
| sha512_finish( &sha512, padbuf ); |
| |
| ssl->handshake->tls_prf( session->master, 48, sender, |
| padbuf, 48, buf, len ); |
| |
| SSL_DEBUG_BUF( 3, "calc finished result", buf, len ); |
| |
| memset( &sha512, 0, sizeof( sha512_context ) ); |
| |
| memset( padbuf, 0, sizeof( padbuf ) ); |
| |
| SSL_DEBUG_MSG( 2, ( "<= calc finished" ) ); |
| } |
| #endif /* POLARSSL_SHA512_C */ |
| #endif /* POLARSSL_SSL_PROTO_TLS1_2 */ |
| |
| void ssl_handshake_wrapup( ssl_context *ssl ) |
| { |
| int resume = ssl->handshake->resume; |
| |
| SSL_DEBUG_MSG( 3, ( "=> handshake wrapup" ) ); |
| |
| /* |
| * Free our handshake params |
| */ |
| ssl_handshake_free( ssl->handshake ); |
| polarssl_free( ssl->handshake ); |
| ssl->handshake = NULL; |
| |
| if( ssl->renegotiation == SSL_RENEGOTIATION ) |
| ssl->renegotiation = SSL_RENEGOTIATION_DONE; |
| |
| /* |
| * Switch in our now active transform context |
| */ |
| if( ssl->transform ) |
| { |
| ssl_transform_free( ssl->transform ); |
| polarssl_free( ssl->transform ); |
| } |
| ssl->transform = ssl->transform_negotiate; |
| ssl->transform_negotiate = NULL; |
| |
| if( ssl->session ) |
| { |
| ssl_session_free( ssl->session ); |
| polarssl_free( ssl->session ); |
| } |
| ssl->session = ssl->session_negotiate; |
| ssl->session_negotiate = NULL; |
| |
| /* |
| * Add cache entry |
| */ |
| if( ssl->f_set_cache != NULL && |
| ssl->session->length != 0 && |
| resume == 0 ) |
| { |
| if( ssl->f_set_cache( ssl->p_set_cache, ssl->session ) != 0 ) |
| SSL_DEBUG_MSG( 1, ( "cache did not store session" ) ); |
| } |
| |
| ssl->state++; |
| |
| SSL_DEBUG_MSG( 3, ( "<= handshake wrapup" ) ); |
| } |
| |
| int ssl_write_finished( ssl_context *ssl ) |
| { |
| int ret, hash_len; |
| |
| SSL_DEBUG_MSG( 2, ( "=> write finished" ) ); |
| |
| /* |
| * Set the out_msg pointer to the correct location based on IV length |
| */ |
| if( ssl->minor_ver >= SSL_MINOR_VERSION_2 ) |
| { |
| ssl->out_msg = ssl->out_iv + ssl->transform_negotiate->ivlen - |
| ssl->transform_negotiate->fixed_ivlen; |
| } |
| else |
| ssl->out_msg = ssl->out_iv; |
| |
| ssl->handshake->calc_finished( ssl, ssl->out_msg + 4, ssl->endpoint ); |
| |
| // TODO TLS/1.2 Hash length is determined by cipher suite (Page 63) |
| hash_len = ( ssl->minor_ver == SSL_MINOR_VERSION_0 ) ? 36 : 12; |
| |
| ssl->verify_data_len = hash_len; |
| memcpy( ssl->own_verify_data, ssl->out_msg + 4, hash_len ); |
| |
| ssl->out_msglen = 4 + hash_len; |
| ssl->out_msgtype = SSL_MSG_HANDSHAKE; |
| ssl->out_msg[0] = SSL_HS_FINISHED; |
| |
| /* |
| * In case of session resuming, invert the client and server |
| * ChangeCipherSpec messages order. |
| */ |
| if( ssl->handshake->resume != 0 ) |
| { |
| if( ssl->endpoint == SSL_IS_CLIENT ) |
| ssl->state = SSL_HANDSHAKE_WRAPUP; |
| else |
| ssl->state = SSL_CLIENT_CHANGE_CIPHER_SPEC; |
| } |
| else |
| ssl->state++; |
| |
| /* |
| * Switch to our negotiated transform and session parameters for outbound |
| * data. |
| */ |
| SSL_DEBUG_MSG( 3, ( "switching to new transform spec for outbound data" ) ); |
| ssl->transform_out = ssl->transform_negotiate; |
| ssl->session_out = ssl->session_negotiate; |
| memset( ssl->out_ctr, 0, 8 ); |
| |
| #if defined(POLARSSL_SSL_HW_RECORD_ACCEL) |
| if( ssl_hw_record_activate != NULL) |
| { |
| if( ( ret = ssl_hw_record_activate( ssl, SSL_CHANNEL_OUTBOUND ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "ssl_hw_record_activate", ret ); |
| return( POLARSSL_ERR_SSL_HW_ACCEL_FAILED ); |
| } |
| } |
| #endif |
| |
| if( ( ret = ssl_write_record( ssl ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "ssl_write_record", ret ); |
| return( ret ); |
| } |
| |
| SSL_DEBUG_MSG( 2, ( "<= write finished" ) ); |
| |
| return( 0 ); |
| } |
| |
| int ssl_parse_finished( ssl_context *ssl ) |
| { |
| int ret; |
| unsigned int hash_len; |
| unsigned char buf[36]; |
| |
| SSL_DEBUG_MSG( 2, ( "=> parse finished" ) ); |
| |
| ssl->handshake->calc_finished( ssl, buf, ssl->endpoint ^ 1 ); |
| |
| /* |
| * Switch to our negotiated transform and session parameters for inbound |
| * data. |
| */ |
| SSL_DEBUG_MSG( 3, ( "switching to new transform spec for inbound data" ) ); |
| ssl->transform_in = ssl->transform_negotiate; |
| ssl->session_in = ssl->session_negotiate; |
| memset( ssl->in_ctr, 0, 8 ); |
| |
| /* |
| * Set the in_msg pointer to the correct location based on IV length |
| */ |
| if( ssl->minor_ver >= SSL_MINOR_VERSION_2 ) |
| { |
| ssl->in_msg = ssl->in_iv + ssl->transform_negotiate->ivlen - |
| ssl->transform_negotiate->fixed_ivlen; |
| } |
| else |
| ssl->in_msg = ssl->in_iv; |
| |
| #if defined(POLARSSL_SSL_HW_RECORD_ACCEL) |
| if( ssl_hw_record_activate != NULL) |
| { |
| if( ( ret = ssl_hw_record_activate( ssl, SSL_CHANNEL_INBOUND ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "ssl_hw_record_activate", ret ); |
| return( POLARSSL_ERR_SSL_HW_ACCEL_FAILED ); |
| } |
| } |
| #endif |
| |
| if( ( ret = ssl_read_record( ssl ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "ssl_read_record", ret ); |
| return( ret ); |
| } |
| |
| if( ssl->in_msgtype != SSL_MSG_HANDSHAKE ) |
| { |
| SSL_DEBUG_MSG( 1, ( "bad finished message" ) ); |
| return( POLARSSL_ERR_SSL_UNEXPECTED_MESSAGE ); |
| } |
| |
| // TODO TLS/1.2 Hash length is determined by cipher suite (Page 63) |
| hash_len = ( ssl->minor_ver == SSL_MINOR_VERSION_0 ) ? 36 : 12; |
| |
| if( ssl->in_msg[0] != SSL_HS_FINISHED || |
| ssl->in_hslen != 4 + hash_len ) |
| { |
| SSL_DEBUG_MSG( 1, ( "bad finished message" ) ); |
| return( POLARSSL_ERR_SSL_BAD_HS_FINISHED ); |
| } |
| |
| if( safer_memcmp( ssl->in_msg + 4, buf, hash_len ) != 0 ) |
| { |
| SSL_DEBUG_MSG( 1, ( "bad finished message" ) ); |
| return( POLARSSL_ERR_SSL_BAD_HS_FINISHED ); |
| } |
| |
| ssl->verify_data_len = hash_len; |
| memcpy( ssl->peer_verify_data, buf, hash_len ); |
| |
| if( ssl->handshake->resume != 0 ) |
| { |
| if( ssl->endpoint == SSL_IS_CLIENT ) |
| ssl->state = SSL_CLIENT_CHANGE_CIPHER_SPEC; |
| |
| if( ssl->endpoint == SSL_IS_SERVER ) |
| ssl->state = SSL_HANDSHAKE_WRAPUP; |
| } |
| else |
| ssl->state++; |
| |
| SSL_DEBUG_MSG( 2, ( "<= parse finished" ) ); |
| |
| return( 0 ); |
| } |
| |
| static int ssl_handshake_init( ssl_context *ssl ) |
| { |
| if( ssl->transform_negotiate ) |
| ssl_transform_free( ssl->transform_negotiate ); |
| else |
| { |
| ssl->transform_negotiate = |
| (ssl_transform *) polarssl_malloc( sizeof(ssl_transform) ); |
| |
| if( ssl->transform_negotiate != NULL ) |
| memset( ssl->transform_negotiate, 0, sizeof(ssl_transform) ); |
| } |
| |
| if( ssl->session_negotiate ) |
| ssl_session_free( ssl->session_negotiate ); |
| else |
| { |
| ssl->session_negotiate = |
| (ssl_session *) polarssl_malloc( sizeof(ssl_session) ); |
| |
| if( ssl->session_negotiate != NULL ) |
| memset( ssl->session_negotiate, 0, sizeof(ssl_session) ); |
| } |
| |
| if( ssl->handshake ) |
| ssl_handshake_free( ssl->handshake ); |
| else |
| { |
| ssl->handshake = (ssl_handshake_params *) |
| polarssl_malloc( sizeof(ssl_handshake_params) ); |
| |
| if( ssl->handshake != NULL ) |
| memset( ssl->handshake, 0, sizeof(ssl_handshake_params) ); |
| } |
| |
| if( ssl->handshake == NULL || |
| ssl->transform_negotiate == NULL || |
| ssl->session_negotiate == NULL ) |
| { |
| SSL_DEBUG_MSG( 1, ( "malloc() of ssl sub-contexts failed" ) ); |
| return( POLARSSL_ERR_SSL_MALLOC_FAILED ); |
| } |
| |
| #if defined(POLARSSL_SSL_PROTO_SSL3) || defined(POLARSSL_SSL_PROTO_TLS1) || \ |
| defined(POLARSSL_SSL_PROTO_TLS1_1) |
| md5_starts( &ssl->handshake->fin_md5 ); |
| sha1_starts( &ssl->handshake->fin_sha1 ); |
| #endif |
| #if defined(POLARSSL_SSL_PROTO_TLS1_2) |
| #if defined(POLARSSL_SHA256_C) |
| sha256_starts( &ssl->handshake->fin_sha256, 0 ); |
| #endif |
| #if defined(POLARSSL_SHA512_C) |
| sha512_starts( &ssl->handshake->fin_sha512, 1 ); |
| #endif |
| #endif /* POLARSSL_SSL_PROTO_TLS1_2 */ |
| |
| ssl->handshake->update_checksum = ssl_update_checksum_start; |
| ssl->handshake->sig_alg = SSL_HASH_SHA1; |
| |
| #if defined(POLARSSL_ECDH_C) |
| ecdh_init( &ssl->handshake->ecdh_ctx ); |
| #endif |
| |
| #if defined(POLARSSL_X509_CRT_PARSE_C) |
| ssl->handshake->key_cert = ssl->key_cert; |
| #endif |
| |
| return( 0 ); |
| } |
| |
| /* |
| * Initialize an SSL context |
| */ |
| int ssl_init( ssl_context *ssl ) |
| { |
| int ret; |
| int len = SSL_BUFFER_LEN; |
| |
| memset( ssl, 0, sizeof( ssl_context ) ); |
| |
| /* |
| * Sane defaults |
| */ |
| ssl->min_major_ver = SSL_MIN_MAJOR_VERSION; |
| ssl->min_minor_ver = SSL_MIN_MINOR_VERSION; |
| ssl->max_major_ver = SSL_MAX_MAJOR_VERSION; |
| ssl->max_minor_ver = SSL_MAX_MINOR_VERSION; |
| |
| ssl_set_ciphersuites( ssl, ssl_list_ciphersuites() ); |
| |
| #if defined(POLARSSL_DHM_C) |
| if( ( ret = mpi_read_string( &ssl->dhm_P, 16, |
| POLARSSL_DHM_RFC5114_MODP_1024_P) ) != 0 || |
| ( ret = mpi_read_string( &ssl->dhm_G, 16, |
| POLARSSL_DHM_RFC5114_MODP_1024_G) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "mpi_read_string", ret ); |
| return( ret ); |
| } |
| #endif |
| |
| /* |
| * Prepare base structures |
| */ |
| ssl->in_ctr = (unsigned char *) polarssl_malloc( len ); |
| ssl->in_hdr = ssl->in_ctr + 8; |
| ssl->in_iv = ssl->in_ctr + 13; |
| ssl->in_msg = ssl->in_ctr + 13; |
| |
| if( ssl->in_ctr == NULL ) |
| { |
| SSL_DEBUG_MSG( 1, ( "malloc(%d bytes) failed", len ) ); |
| return( POLARSSL_ERR_SSL_MALLOC_FAILED ); |
| } |
| |
| ssl->out_ctr = (unsigned char *) polarssl_malloc( len ); |
| ssl->out_hdr = ssl->out_ctr + 8; |
| ssl->out_iv = ssl->out_ctr + 13; |
| ssl->out_msg = ssl->out_ctr + 13; |
| |
| if( ssl->out_ctr == NULL ) |
| { |
| SSL_DEBUG_MSG( 1, ( "malloc(%d bytes) failed", len ) ); |
| polarssl_free( ssl->in_ctr ); |
| ssl->in_ctr = NULL; |
| return( POLARSSL_ERR_SSL_MALLOC_FAILED ); |
| } |
| |
| memset( ssl-> in_ctr, 0, SSL_BUFFER_LEN ); |
| memset( ssl->out_ctr, 0, SSL_BUFFER_LEN ); |
| |
| #if defined(POLARSSL_SSL_SESSION_TICKETS) |
| ssl->ticket_lifetime = SSL_DEFAULT_TICKET_LIFETIME; |
| #endif |
| |
| #if defined(POLARSSL_SSL_SET_CURVES) |
| ssl->curve_list = ecp_grp_id_list( ); |
| #endif |
| |
| if( ( ret = ssl_handshake_init( ssl ) ) != 0 ) |
| return( ret ); |
| |
| return( 0 ); |
| } |
| |
| /* |
| * Reset an initialized and used SSL context for re-use while retaining |
| * all application-set variables, function pointers and data. |
| */ |
| int ssl_session_reset( ssl_context *ssl ) |
| { |
| int ret; |
| |
| ssl->state = SSL_HELLO_REQUEST; |
| ssl->renegotiation = SSL_INITIAL_HANDSHAKE; |
| ssl->secure_renegotiation = SSL_LEGACY_RENEGOTIATION; |
| |
| ssl->verify_data_len = 0; |
| memset( ssl->own_verify_data, 0, 36 ); |
| memset( ssl->peer_verify_data, 0, 36 ); |
| |
| ssl->in_offt = NULL; |
| |
| ssl->in_msg = ssl->in_ctr + 13; |
| ssl->in_msgtype = 0; |
| ssl->in_msglen = 0; |
| ssl->in_left = 0; |
| |
| ssl->in_hslen = 0; |
| ssl->nb_zero = 0; |
| ssl->record_read = 0; |
| |
| ssl->out_msg = ssl->out_ctr + 13; |
| ssl->out_msgtype = 0; |
| ssl->out_msglen = 0; |
| ssl->out_left = 0; |
| |
| ssl->transform_in = NULL; |
| ssl->transform_out = NULL; |
| |
| memset( ssl->out_ctr, 0, SSL_BUFFER_LEN ); |
| memset( ssl->in_ctr, 0, SSL_BUFFER_LEN ); |
| |
| #if defined(POLARSSL_SSL_HW_RECORD_ACCEL) |
| if( ssl_hw_record_reset != NULL) |
| { |
| SSL_DEBUG_MSG( 2, ( "going for ssl_hw_record_reset()" ) ); |
| if( ( ret = ssl_hw_record_reset( ssl ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "ssl_hw_record_reset", ret ); |
| return( POLARSSL_ERR_SSL_HW_ACCEL_FAILED ); |
| } |
| } |
| #endif |
| |
| if( ssl->transform ) |
| { |
| ssl_transform_free( ssl->transform ); |
| polarssl_free( ssl->transform ); |
| ssl->transform = NULL; |
| } |
| |
| if( ssl->session ) |
| { |
| ssl_session_free( ssl->session ); |
| polarssl_free( ssl->session ); |
| ssl->session = NULL; |
| } |
| |
| #if defined(POLARSSL_SSL_ALPN) |
| ssl->alpn_chosen = NULL; |
| #endif |
| |
| if( ( ret = ssl_handshake_init( ssl ) ) != 0 ) |
| return( ret ); |
| |
| return( 0 ); |
| } |
| |
| #if defined(POLARSSL_SSL_SESSION_TICKETS) |
| /* |
| * Allocate and initialize ticket keys |
| */ |
| static int ssl_ticket_keys_init( ssl_context *ssl ) |
| { |
| int ret; |
| ssl_ticket_keys *tkeys; |
| unsigned char buf[16]; |
| |
| if( ssl->ticket_keys != NULL ) |
| return( 0 ); |
| |
| tkeys = (ssl_ticket_keys *) polarssl_malloc( sizeof(ssl_ticket_keys) ); |
| if( tkeys == NULL ) |
| return( POLARSSL_ERR_SSL_MALLOC_FAILED ); |
| |
| if( ( ret = ssl->f_rng( ssl->p_rng, tkeys->key_name, 16 ) ) != 0 ) |
| { |
| polarssl_free( tkeys ); |
| return( ret ); |
| } |
| |
| if( ( ret = ssl->f_rng( ssl->p_rng, buf, 16 ) ) != 0 || |
| ( ret = aes_setkey_enc( &tkeys->enc, buf, 128 ) ) != 0 || |
| ( ret = aes_setkey_dec( &tkeys->dec, buf, 128 ) ) != 0 ) |
| { |
| polarssl_free( tkeys ); |
| return( ret ); |
| } |
| |
| if( ( ret = ssl->f_rng( ssl->p_rng, tkeys->mac_key, 16 ) ) != 0 ) |
| { |
| polarssl_free( tkeys ); |
| return( ret ); |
| } |
| |
| ssl->ticket_keys = tkeys; |
| |
| return( 0 ); |
| } |
| #endif /* POLARSSL_SSL_SESSION_TICKETS */ |
| |
| /* |
| * SSL set accessors |
| */ |
| void ssl_set_endpoint( ssl_context *ssl, int endpoint ) |
| { |
| ssl->endpoint = endpoint; |
| |
| #if defined(POLARSSL_SSL_SESSION_TICKETS) |
| if( endpoint == SSL_IS_CLIENT ) |
| ssl->session_tickets = SSL_SESSION_TICKETS_ENABLED; |
| #endif |
| } |
| |
| void ssl_set_authmode( ssl_context *ssl, int authmode ) |
| { |
| ssl->authmode = authmode; |
| } |
| |
| #if defined(POLARSSL_X509_CRT_PARSE_C) |
| void ssl_set_verify( ssl_context *ssl, |
| int (*f_vrfy)(void *, x509_crt *, int, int *), |
| void *p_vrfy ) |
| { |
| ssl->f_vrfy = f_vrfy; |
| ssl->p_vrfy = p_vrfy; |
| } |
| #endif /* POLARSSL_X509_CRT_PARSE_C */ |
| |
| void ssl_set_rng( ssl_context *ssl, |
| int (*f_rng)(void *, unsigned char *, size_t), |
| void *p_rng ) |
| { |
| ssl->f_rng = f_rng; |
| ssl->p_rng = p_rng; |
| } |
| |
| void ssl_set_dbg( ssl_context *ssl, |
| void (*f_dbg)(void *, int, const char *), |
| void *p_dbg ) |
| { |
| ssl->f_dbg = f_dbg; |
| ssl->p_dbg = p_dbg; |
| } |
| |
| void ssl_set_bio( ssl_context *ssl, |
| int (*f_recv)(void *, unsigned char *, size_t), void *p_recv, |
| int (*f_send)(void *, const unsigned char *, size_t), void *p_send ) |
| { |
| ssl->f_recv = f_recv; |
| ssl->f_send = f_send; |
| ssl->p_recv = p_recv; |
| ssl->p_send = p_send; |
| } |
| |
| void ssl_set_session_cache( ssl_context *ssl, |
| int (*f_get_cache)(void *, ssl_session *), void *p_get_cache, |
| int (*f_set_cache)(void *, const ssl_session *), void *p_set_cache ) |
| { |
| ssl->f_get_cache = f_get_cache; |
| ssl->p_get_cache = p_get_cache; |
| ssl->f_set_cache = f_set_cache; |
| ssl->p_set_cache = p_set_cache; |
| } |
| |
| int ssl_set_session( ssl_context *ssl, const ssl_session *session ) |
| { |
| int ret; |
| |
| if( ssl == NULL || |
| session == NULL || |
| ssl->session_negotiate == NULL || |
| ssl->endpoint != SSL_IS_CLIENT ) |
| { |
| return( POLARSSL_ERR_SSL_BAD_INPUT_DATA ); |
| } |
| |
| if( ( ret = ssl_session_copy( ssl->session_negotiate, session ) ) != 0 ) |
| return( ret ); |
| |
| ssl->handshake->resume = 1; |
| |
| return( 0 ); |
| } |
| |
| void ssl_set_ciphersuites( ssl_context *ssl, const int *ciphersuites ) |
| { |
| ssl->ciphersuite_list[SSL_MINOR_VERSION_0] = ciphersuites; |
| ssl->ciphersuite_list[SSL_MINOR_VERSION_1] = ciphersuites; |
| ssl->ciphersuite_list[SSL_MINOR_VERSION_2] = ciphersuites; |
| ssl->ciphersuite_list[SSL_MINOR_VERSION_3] = ciphersuites; |
| } |
| |
| void ssl_set_ciphersuites_for_version( ssl_context *ssl, |
| const int *ciphersuites, |
| int major, int minor ) |
| { |
| if( major != SSL_MAJOR_VERSION_3 ) |
| return; |
| |
| if( minor < SSL_MINOR_VERSION_0 || minor > SSL_MINOR_VERSION_3 ) |
| return; |
| |
| ssl->ciphersuite_list[minor] = ciphersuites; |
| } |
| |
| #if defined(POLARSSL_X509_CRT_PARSE_C) |
| /* Add a new (empty) key_cert entry an return a pointer to it */ |
| static ssl_key_cert *ssl_add_key_cert( ssl_context *ssl ) |
| { |
| ssl_key_cert *key_cert, *last; |
| |
| key_cert = (ssl_key_cert *) polarssl_malloc( sizeof(ssl_key_cert) ); |
| if( key_cert == NULL ) |
| return( NULL ); |
| |
| memset( key_cert, 0, sizeof( ssl_key_cert ) ); |
| |
| /* Append the new key_cert to the (possibly empty) current list */ |
| if( ssl->key_cert == NULL ) |
| { |
| ssl->key_cert = key_cert; |
| if( ssl->handshake != NULL ) |
| ssl->handshake->key_cert = key_cert; |
| } |
| else |
| { |
| last = ssl->key_cert; |
| while( last->next != NULL ) |
| last = last->next; |
| last->next = key_cert; |
| } |
| |
| return key_cert; |
| } |
| |
| void ssl_set_ca_chain( ssl_context *ssl, x509_crt *ca_chain, |
| x509_crl *ca_crl, const char *peer_cn ) |
| { |
| ssl->ca_chain = ca_chain; |
| ssl->ca_crl = ca_crl; |
| ssl->peer_cn = peer_cn; |
| } |
| |
| int ssl_set_own_cert( ssl_context *ssl, x509_crt *own_cert, |
| pk_context *pk_key ) |
| { |
| ssl_key_cert *key_cert = ssl_add_key_cert( ssl ); |
| |
| if( key_cert == NULL ) |
| return( POLARSSL_ERR_SSL_MALLOC_FAILED ); |
| |
| key_cert->cert = own_cert; |
| key_cert->key = pk_key; |
| |
| return( 0 ); |
| } |
| |
| #if defined(POLARSSL_RSA_C) |
| int ssl_set_own_cert_rsa( ssl_context *ssl, x509_crt *own_cert, |
| rsa_context *rsa_key ) |
| { |
| int ret; |
| ssl_key_cert *key_cert = ssl_add_key_cert( ssl ); |
| |
| if( key_cert == NULL ) |
| return( POLARSSL_ERR_SSL_MALLOC_FAILED ); |
| |
| key_cert->key = (pk_context *) polarssl_malloc( sizeof(pk_context) ); |
| if( key_cert->key == NULL ) |
| return( POLARSSL_ERR_SSL_MALLOC_FAILED ); |
| |
| pk_init( key_cert->key ); |
| |
| ret = pk_init_ctx( key_cert->key, pk_info_from_type( POLARSSL_PK_RSA ) ); |
| if( ret != 0 ) |
| return( ret ); |
| |
| if( ( ret = rsa_copy( pk_rsa( *key_cert->key ), rsa_key ) ) != 0 ) |
| return( ret ); |
| |
| key_cert->cert = own_cert; |
| key_cert->key_own_alloc = 1; |
| |
| return( 0 ); |
| } |
| #endif /* POLARSSL_RSA_C */ |
| |
| int ssl_set_own_cert_alt( ssl_context *ssl, x509_crt *own_cert, |
| void *rsa_key, |
| rsa_decrypt_func rsa_decrypt, |
| rsa_sign_func rsa_sign, |
| rsa_key_len_func rsa_key_len ) |
| { |
| int ret; |
| ssl_key_cert *key_cert = ssl_add_key_cert( ssl ); |
| |
| if( key_cert == NULL ) |
| return( POLARSSL_ERR_SSL_MALLOC_FAILED ); |
| |
| key_cert->key = (pk_context *) polarssl_malloc( sizeof(pk_context) ); |
| if( key_cert->key == NULL ) |
| return( POLARSSL_ERR_SSL_MALLOC_FAILED ); |
| |
| pk_init( key_cert->key ); |
| |
| if( ( ret = pk_init_ctx_rsa_alt( key_cert->key, rsa_key, |
| rsa_decrypt, rsa_sign, rsa_key_len ) ) != 0 ) |
| return( ret ); |
| |
| key_cert->cert = own_cert; |
| key_cert->key_own_alloc = 1; |
| |
| return( 0 ); |
| } |
| #endif /* POLARSSL_X509_CRT_PARSE_C */ |
| |
| #if defined(POLARSSL_KEY_EXCHANGE__SOME__PSK_ENABLED) |
| int ssl_set_psk( ssl_context *ssl, const unsigned char *psk, size_t psk_len, |
| const unsigned char *psk_identity, size_t psk_identity_len ) |
| { |
| if( psk == NULL || psk_identity == NULL ) |
| return( POLARSSL_ERR_SSL_BAD_INPUT_DATA ); |
| |
| /* |
| * The length will be check later anyway, but in case it is obviously |
| * too large, better abort now. The PMS is as follows: |
| * other_len (2 bytes) + other + psk_len (2 bytes) + psk |
| */ |
| if( psk_len + 4 > POLARSSL_PREMASTER_SIZE ) |
| return( POLARSSL_ERR_SSL_BAD_INPUT_DATA ); |
| |
| if( ssl->psk != NULL ) |
| { |
| polarssl_free( ssl->psk ); |
| polarssl_free( ssl->psk_identity ); |
| } |
| |
| ssl->psk_len = psk_len; |
| ssl->psk_identity_len = psk_identity_len; |
| |
| ssl->psk = (unsigned char *) polarssl_malloc( ssl->psk_len ); |
| ssl->psk_identity = (unsigned char *) |
| polarssl_malloc( ssl->psk_identity_len ); |
| |
| if( ssl->psk == NULL || ssl->psk_identity == NULL ) |
| return( POLARSSL_ERR_SSL_MALLOC_FAILED ); |
| |
| memcpy( ssl->psk, psk, ssl->psk_len ); |
| memcpy( ssl->psk_identity, psk_identity, ssl->psk_identity_len ); |
| |
| return( 0 ); |
| } |
| |
| void ssl_set_psk_cb( ssl_context *ssl, |
| int (*f_psk)(void *, ssl_context *, const unsigned char *, |
| size_t), |
| void *p_psk ) |
| { |
| ssl->f_psk = f_psk; |
| ssl->p_psk = p_psk; |
| } |
| #endif /* POLARSSL_KEY_EXCHANGE__SOME__PSK_ENABLED */ |
| |
| #if defined(POLARSSL_DHM_C) |
| int ssl_set_dh_param( ssl_context *ssl, const char *dhm_P, const char *dhm_G ) |
| { |
| int ret; |
| |
| if( ( ret = mpi_read_string( &ssl->dhm_P, 16, dhm_P ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "mpi_read_string", ret ); |
| return( ret ); |
| } |
| |
| if( ( ret = mpi_read_string( &ssl->dhm_G, 16, dhm_G ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "mpi_read_string", ret ); |
| return( ret ); |
| } |
| |
| return( 0 ); |
| } |
| |
| int ssl_set_dh_param_ctx( ssl_context *ssl, dhm_context *dhm_ctx ) |
| { |
| int ret; |
| |
| if( ( ret = mpi_copy(&ssl->dhm_P, &dhm_ctx->P) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "mpi_copy", ret ); |
| return( ret ); |
| } |
| |
| if( ( ret = mpi_copy(&ssl->dhm_G, &dhm_ctx->G) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "mpi_copy", ret ); |
| return( ret ); |
| } |
| |
| return( 0 ); |
| } |
| #endif /* POLARSSL_DHM_C */ |
| |
| #if defined(POLARSSL_SSL_SET_CURVES) |
| /* |
| * Set the allowed elliptic curves |
| */ |
| void ssl_set_curves( ssl_context *ssl, const ecp_group_id *curve_list ) |
| { |
| ssl->curve_list = curve_list; |
| } |
| #endif |
| |
| #if defined(POLARSSL_SSL_SERVER_NAME_INDICATION) |
| int ssl_set_hostname( ssl_context *ssl, const char *hostname ) |
| { |
| if( hostname == NULL ) |
| return( POLARSSL_ERR_SSL_BAD_INPUT_DATA ); |
| |
| ssl->hostname_len = strlen( hostname ); |
| |
| if( ssl->hostname_len + 1 == 0 ) |
| return( POLARSSL_ERR_SSL_BAD_INPUT_DATA ); |
| |
| ssl->hostname = (unsigned char *) polarssl_malloc( ssl->hostname_len + 1 ); |
| |
| if( ssl->hostname == NULL ) |
| return( POLARSSL_ERR_SSL_MALLOC_FAILED ); |
| |
| memcpy( ssl->hostname, (const unsigned char *) hostname, |
| ssl->hostname_len ); |
| |
| ssl->hostname[ssl->hostname_len] = '\0'; |
| |
| return( 0 ); |
| } |
| |
| void ssl_set_sni( ssl_context *ssl, |
| int (*f_sni)(void *, ssl_context *, |
| const unsigned char *, size_t), |
| void *p_sni ) |
| { |
| ssl->f_sni = f_sni; |
| ssl->p_sni = p_sni; |
| } |
| #endif /* POLARSSL_SSL_SERVER_NAME_INDICATION */ |
| |
| #if defined(POLARSSL_SSL_ALPN) |
| int ssl_set_alpn_protocols( ssl_context *ssl, const char **protos ) |
| { |
| size_t cur_len, tot_len; |
| const char **p; |
| |
| /* |
| * "Empty strings MUST NOT be included and byte strings MUST NOT be |
| * truncated". Check lengths now rather than later. |
| */ |
| tot_len = 0; |
| for( p = protos; *p != NULL; p++ ) |
| { |
| cur_len = strlen( *p ); |
| tot_len += cur_len; |
| |
| if( cur_len == 0 || cur_len > 255 || tot_len > 65535 ) |
| return( POLARSSL_ERR_SSL_BAD_INPUT_DATA ); |
| } |
| |
| ssl->alpn_list = protos; |
| |
| return( 0 ); |
| } |
| |
| const char *ssl_get_alpn_protocol( const ssl_context *ssl ) |
| { |
| return ssl->alpn_chosen; |
| } |
| #endif /* POLARSSL_SSL_ALPN */ |
| |
| void ssl_set_max_version( ssl_context *ssl, int major, int minor ) |
| { |
| if( major >= SSL_MIN_MAJOR_VERSION && major <= SSL_MAX_MAJOR_VERSION && |
| minor >= SSL_MIN_MINOR_VERSION && minor <= SSL_MAX_MINOR_VERSION ) |
| { |
| ssl->max_major_ver = major; |
| ssl->max_minor_ver = minor; |
| } |
| } |
| |
| void ssl_set_min_version( ssl_context *ssl, int major, int minor ) |
| { |
| if( major >= SSL_MIN_MAJOR_VERSION && major <= SSL_MAX_MAJOR_VERSION && |
| minor >= SSL_MIN_MINOR_VERSION && minor <= SSL_MAX_MINOR_VERSION ) |
| { |
| ssl->min_major_ver = major; |
| ssl->min_minor_ver = minor; |
| } |
| } |
| |
| #if defined(POLARSSL_SSL_MAX_FRAGMENT_LENGTH) |
| int ssl_set_max_frag_len( ssl_context *ssl, unsigned char mfl_code ) |
| { |
| if( mfl_code >= SSL_MAX_FRAG_LEN_INVALID || |
| mfl_code_to_length[mfl_code] > SSL_MAX_CONTENT_LEN ) |
| { |
| return( POLARSSL_ERR_SSL_BAD_INPUT_DATA ); |
| } |
| |
| ssl->mfl_code = mfl_code; |
| |
| return( 0 ); |
| } |
| #endif /* POLARSSL_SSL_MAX_FRAGMENT_LENGTH */ |
| |
| #if defined(POLARSSL_SSL_TRUNCATED_HMAC) |
| int ssl_set_truncated_hmac( ssl_context *ssl, int truncate ) |
| { |
| if( ssl->endpoint != SSL_IS_CLIENT ) |
| return( POLARSSL_ERR_SSL_BAD_INPUT_DATA ); |
| |
| ssl->trunc_hmac = truncate; |
| |
| return( 0 ); |
| } |
| #endif /* POLARSSL_SSL_TRUNCATED_HMAC */ |
| |
| void ssl_set_renegotiation( ssl_context *ssl, int renegotiation ) |
| { |
| ssl->disable_renegotiation = renegotiation; |
| } |
| |
| void ssl_legacy_renegotiation( ssl_context *ssl, int allow_legacy ) |
| { |
| ssl->allow_legacy_renegotiation = allow_legacy; |
| } |
| |
| #if defined(POLARSSL_SSL_SESSION_TICKETS) |
| int ssl_set_session_tickets( ssl_context *ssl, int use_tickets ) |
| { |
| ssl->session_tickets = use_tickets; |
| |
| if( ssl->endpoint == SSL_IS_CLIENT ) |
| return( 0 ); |
| |
| if( ssl->f_rng == NULL ) |
| return( POLARSSL_ERR_SSL_BAD_INPUT_DATA ); |
| |
| return( ssl_ticket_keys_init( ssl ) ); |
| } |
| |
| void ssl_set_session_ticket_lifetime( ssl_context *ssl, int lifetime ) |
| { |
| ssl->ticket_lifetime = lifetime; |
| } |
| #endif /* POLARSSL_SSL_SESSION_TICKETS */ |
| |
| /* |
| * SSL get accessors |
| */ |
| size_t ssl_get_bytes_avail( const ssl_context *ssl ) |
| { |
| return( ssl->in_offt == NULL ? 0 : ssl->in_msglen ); |
| } |
| |
| int ssl_get_verify_result( const ssl_context *ssl ) |
| { |
| return( ssl->session->verify_result ); |
| } |
| |
| const char *ssl_get_ciphersuite( const ssl_context *ssl ) |
| { |
| if( ssl == NULL || ssl->session == NULL ) |
| return NULL; |
| |
| return ssl_get_ciphersuite_name( ssl->session->ciphersuite ); |
| } |
| |
| const char *ssl_get_version( const ssl_context *ssl ) |
| { |
| switch( ssl->minor_ver ) |
| { |
| case SSL_MINOR_VERSION_0: |
| return( "SSLv3.0" ); |
| |
| case SSL_MINOR_VERSION_1: |
| return( "TLSv1.0" ); |
| |
| case SSL_MINOR_VERSION_2: |
| return( "TLSv1.1" ); |
| |
| case SSL_MINOR_VERSION_3: |
| return( "TLSv1.2" ); |
| |
| default: |
| break; |
| } |
| return( "unknown" ); |
| } |
| |
| #if defined(POLARSSL_X509_CRT_PARSE_C) |
| const x509_crt *ssl_get_peer_cert( const ssl_context *ssl ) |
| { |
| if( ssl == NULL || ssl->session == NULL ) |
| return NULL; |
| |
| return ssl->session->peer_cert; |
| } |
| #endif /* POLARSSL_X509_CRT_PARSE_C */ |
| |
| int ssl_get_session( const ssl_context *ssl, ssl_session *dst ) |
| { |
| if( ssl == NULL || |
| dst == NULL || |
| ssl->session == NULL || |
| ssl->endpoint != SSL_IS_CLIENT ) |
| { |
| return( POLARSSL_ERR_SSL_BAD_INPUT_DATA ); |
| } |
| |
| return( ssl_session_copy( dst, ssl->session ) ); |
| } |
| |
| /* |
| * Perform a single step of the SSL handshake |
| */ |
| int ssl_handshake_step( ssl_context *ssl ) |
| { |
| int ret = POLARSSL_ERR_SSL_FEATURE_UNAVAILABLE; |
| |
| #if defined(POLARSSL_SSL_CLI_C) |
| if( ssl->endpoint == SSL_IS_CLIENT ) |
| ret = ssl_handshake_client_step( ssl ); |
| #endif |
| |
| #if defined(POLARSSL_SSL_SRV_C) |
| if( ssl->endpoint == SSL_IS_SERVER ) |
| ret = ssl_handshake_server_step( ssl ); |
| #endif |
| |
| return( ret ); |
| } |
| |
| /* |
| * Perform the SSL handshake |
| */ |
| int ssl_handshake( ssl_context *ssl ) |
| { |
| int ret = 0; |
| |
| SSL_DEBUG_MSG( 2, ( "=> handshake" ) ); |
| |
| while( ssl->state != SSL_HANDSHAKE_OVER ) |
| { |
| ret = ssl_handshake_step( ssl ); |
| |
| if( ret != 0 ) |
| break; |
| } |
| |
| SSL_DEBUG_MSG( 2, ( "<= handshake" ) ); |
| |
| return( ret ); |
| } |
| |
| #if defined(POLARSSL_SSL_SRV_C) |
| /* |
| * Write HelloRequest to request renegotiation on server |
| */ |
| static int ssl_write_hello_request( ssl_context *ssl ) |
| { |
| int ret; |
| |
| SSL_DEBUG_MSG( 2, ( "=> write hello request" ) ); |
| |
| ssl->out_msglen = 4; |
| ssl->out_msgtype = SSL_MSG_HANDSHAKE; |
| ssl->out_msg[0] = SSL_HS_HELLO_REQUEST; |
| |
| if( ( ret = ssl_write_record( ssl ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "ssl_write_record", ret ); |
| return( ret ); |
| } |
| |
| ssl->renegotiation = SSL_RENEGOTIATION_PENDING; |
| |
| SSL_DEBUG_MSG( 2, ( "<= write hello request" ) ); |
| |
| return( 0 ); |
| } |
| #endif /* POLARSSL_SSL_SRV_C */ |
| |
| /* |
| * Actually renegotiate current connection, triggered by either: |
| * - calling ssl_renegotiate() on client, |
| * - receiving a HelloRequest on client during ssl_read(), |
| * - receiving any handshake message on server during ssl_read() after the |
| * initial handshake is completed |
| * If the handshake doesn't complete due to waiting for I/O, it will continue |
| * during the next calls to ssl_renegotiate() or ssl_read() respectively. |
| */ |
| static int ssl_start_renegotiation( ssl_context *ssl ) |
| { |
| int ret; |
| |
| SSL_DEBUG_MSG( 2, ( "=> renegotiate" ) ); |
| |
| if( ( ret = ssl_handshake_init( ssl ) ) != 0 ) |
| return( ret ); |
| |
| ssl->state = SSL_HELLO_REQUEST; |
| ssl->renegotiation = SSL_RENEGOTIATION; |
| |
| if( ( ret = ssl_handshake( ssl ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "ssl_handshake", ret ); |
| return( ret ); |
| } |
| |
| SSL_DEBUG_MSG( 2, ( "<= renegotiate" ) ); |
| |
| return( 0 ); |
| } |
| |
| /* |
| * Renegotiate current connection on client, |
| * or request renegotiation on server |
| */ |
| int ssl_renegotiate( ssl_context *ssl ) |
| { |
| int ret = POLARSSL_ERR_SSL_FEATURE_UNAVAILABLE; |
| |
| #if defined(POLARSSL_SSL_SRV_C) |
| /* On server, just send the request */ |
| if( ssl->endpoint == SSL_IS_SERVER ) |
| { |
| if( ssl->state != SSL_HANDSHAKE_OVER ) |
| return( POLARSSL_ERR_SSL_BAD_INPUT_DATA ); |
| |
| return( ssl_write_hello_request( ssl ) ); |
| } |
| #endif /* POLARSSL_SSL_SRV_C */ |
| |
| #if defined(POLARSSL_SSL_CLI_C) |
| /* |
| * On client, either start the renegotiation process or, |
| * if already in progress, continue the handshake |
| */ |
| if( ssl->renegotiation != SSL_RENEGOTIATION ) |
| { |
| if( ssl->state != SSL_HANDSHAKE_OVER ) |
| return( POLARSSL_ERR_SSL_BAD_INPUT_DATA ); |
| |
| if( ( ret = ssl_start_renegotiation( ssl ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "ssl_start_renegotiation", ret ); |
| return( ret ); |
| } |
| } |
| else |
| { |
| if( ( ret = ssl_handshake( ssl ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "ssl_handshake", ret ); |
| return( ret ); |
| } |
| } |
| #endif /* POLARSSL_SSL_CLI_C */ |
| |
| return( ret ); |
| } |
| |
| /* |
| * Receive application data decrypted from the SSL layer |
| */ |
| int ssl_read( ssl_context *ssl, unsigned char *buf, size_t len ) |
| { |
| int ret; |
| size_t n; |
| |
| SSL_DEBUG_MSG( 2, ( "=> read" ) ); |
| |
| if( ssl->state != SSL_HANDSHAKE_OVER ) |
| { |
| if( ( ret = ssl_handshake( ssl ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "ssl_handshake", ret ); |
| return( ret ); |
| } |
| } |
| |
| if( ssl->in_offt == NULL ) |
| { |
| if( ( ret = ssl_read_record( ssl ) ) != 0 ) |
| { |
| if( ret == POLARSSL_ERR_SSL_CONN_EOF ) |
| return( 0 ); |
| |
| SSL_DEBUG_RET( 1, "ssl_read_record", ret ); |
| return( ret ); |
| } |
| |
| if( ssl->in_msglen == 0 && |
| ssl->in_msgtype == SSL_MSG_APPLICATION_DATA ) |
| { |
| /* |
| * OpenSSL sends empty messages to randomize the IV |
| */ |
| if( ( ret = ssl_read_record( ssl ) ) != 0 ) |
| { |
| if( ret == POLARSSL_ERR_SSL_CONN_EOF ) |
| return( 0 ); |
| |
| SSL_DEBUG_RET( 1, "ssl_read_record", ret ); |
| return( ret ); |
| } |
| } |
| |
| if( ssl->in_msgtype == SSL_MSG_HANDSHAKE ) |
| { |
| SSL_DEBUG_MSG( 1, ( "received handshake message" ) ); |
| |
| if( ssl->endpoint == SSL_IS_CLIENT && |
| ( ssl->in_msg[0] != SSL_HS_HELLO_REQUEST || |
| ssl->in_hslen != 4 ) ) |
| { |
| SSL_DEBUG_MSG( 1, ( "handshake received (not HelloRequest)" ) ); |
| return( POLARSSL_ERR_SSL_UNEXPECTED_MESSAGE ); |
| } |
| |
| if( ssl->disable_renegotiation == SSL_RENEGOTIATION_DISABLED || |
| ( ssl->secure_renegotiation == SSL_LEGACY_RENEGOTIATION && |
| ssl->allow_legacy_renegotiation == |
| SSL_LEGACY_NO_RENEGOTIATION ) ) |
| { |
| SSL_DEBUG_MSG( 3, ( "ignoring renegotiation, sending alert" ) ); |
| |
| #if defined(POLARSSL_SSL_PROTO_SSL3) |
| if( ssl->minor_ver == SSL_MINOR_VERSION_0 ) |
| { |
| /* |
| * SSLv3 does not have a "no_renegotiation" alert |
| */ |
| if( ( ret = ssl_send_fatal_handshake_failure( ssl ) ) != 0 ) |
| return( ret ); |
| } |
| else |
| #endif /* POLARSSL_SSL_PROTO_SSL3 */ |
| #if defined(POLARSSL_SSL_PROTO_TLS1) || defined(POLARSSL_SSL_PROTO_TLS1_1) || \ |
| defined(POLARSSL_SSL_PROTO_TLS1_2) |
| if( ssl->minor_ver >= SSL_MINOR_VERSION_1 ) |
| { |
| if( ( ret = ssl_send_alert_message( ssl, |
| SSL_ALERT_LEVEL_WARNING, |
| SSL_ALERT_MSG_NO_RENEGOTIATION ) ) != 0 ) |
| { |
| return( ret ); |
| } |
| } |
| else |
| #endif /* POLARSSL_SSL_PROTO_TLS1 || POLARSSL_SSL_PROTO_TLS1_1 || |
| POLARSSL_SSL_PROTO_TLS1_2 */ |
| { |
| SSL_DEBUG_MSG( 1, ( "should never happen" ) ); |
| return( POLARSSL_ERR_SSL_INTERNAL_ERROR ); |
| } |
| } |
| else |
| { |
| if( ( ret = ssl_start_renegotiation( ssl ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "ssl_start_renegotiation", ret ); |
| return( ret ); |
| } |
| |
| return( POLARSSL_ERR_NET_WANT_READ ); |
| } |
| } |
| else if( ssl->renegotiation == SSL_RENEGOTIATION_PENDING ) |
| { |
| SSL_DEBUG_MSG( 1, ( "renegotiation requested, " |
| "but not honored by client" ) ); |
| return( POLARSSL_ERR_SSL_UNEXPECTED_MESSAGE ); |
| } |
| else if( ssl->in_msgtype != SSL_MSG_APPLICATION_DATA ) |
| { |
| SSL_DEBUG_MSG( 1, ( "bad application data message" ) ); |
| return( POLARSSL_ERR_SSL_UNEXPECTED_MESSAGE ); |
| } |
| |
| ssl->in_offt = ssl->in_msg; |
| } |
| |
| n = ( len < ssl->in_msglen ) |
| ? len : ssl->in_msglen; |
| |
| memcpy( buf, ssl->in_offt, n ); |
| ssl->in_msglen -= n; |
| |
| if( ssl->in_msglen == 0 ) |
| /* all bytes consumed */ |
| ssl->in_offt = NULL; |
| else |
| /* more data available */ |
| ssl->in_offt += n; |
| |
| SSL_DEBUG_MSG( 2, ( "<= read" ) ); |
| |
| return( (int) n ); |
| } |
| |
| /* |
| * Send application data to be encrypted by the SSL layer |
| */ |
| int ssl_write( ssl_context *ssl, const unsigned char *buf, size_t len ) |
| { |
| int ret; |
| size_t n; |
| unsigned int max_len = SSL_MAX_CONTENT_LEN; |
| |
| SSL_DEBUG_MSG( 2, ( "=> write" ) ); |
| |
| if( ssl->state != SSL_HANDSHAKE_OVER ) |
| { |
| if( ( ret = ssl_handshake( ssl ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "ssl_handshake", ret ); |
| return( ret ); |
| } |
| } |
| |
| #if defined(POLARSSL_SSL_MAX_FRAGMENT_LENGTH) |
| /* |
| * Assume mfl_code is correct since it was checked when set |
| */ |
| max_len = mfl_code_to_length[ssl->mfl_code]; |
| |
| /* |
| * Check if a smaller max length was negotiated |
| */ |
| if( ssl->session_out != NULL && |
| mfl_code_to_length[ssl->session_out->mfl_code] < max_len ) |
| { |
| max_len = mfl_code_to_length[ssl->session_out->mfl_code]; |
| } |
| #endif /* POLARSSL_SSL_MAX_FRAGMENT_LENGTH */ |
| |
| n = ( len < max_len) ? len : max_len; |
| |
| if( ssl->out_left != 0 ) |
| { |
| if( ( ret = ssl_flush_output( ssl ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "ssl_flush_output", ret ); |
| return( ret ); |
| } |
| } |
| else |
| { |
| ssl->out_msglen = n; |
| ssl->out_msgtype = SSL_MSG_APPLICATION_DATA; |
| memcpy( ssl->out_msg, buf, n ); |
| |
| if( ( ret = ssl_write_record( ssl ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "ssl_write_record", ret ); |
| return( ret ); |
| } |
| } |
| |
| SSL_DEBUG_MSG( 2, ( "<= write" ) ); |
| |
| return( (int) n ); |
| } |
| |
| /* |
| * Notify the peer that the connection is being closed |
| */ |
| int ssl_close_notify( ssl_context *ssl ) |
| { |
| int ret; |
| |
| SSL_DEBUG_MSG( 2, ( "=> write close notify" ) ); |
| |
| if( ( ret = ssl_flush_output( ssl ) ) != 0 ) |
| { |
| SSL_DEBUG_RET( 1, "ssl_flush_output", ret ); |
| return( ret ); |
| } |
| |
| if( ssl->state == SSL_HANDSHAKE_OVER ) |
| { |
| if( ( ret = ssl_send_alert_message( ssl, |
| SSL_ALERT_LEVEL_WARNING, |
| SSL_ALERT_MSG_CLOSE_NOTIFY ) ) != 0 ) |
| { |
| return( ret ); |
| } |
| } |
| |
| SSL_DEBUG_MSG( 2, ( "<= write close notify" ) ); |
| |
| return( ret ); |
| } |
| |
| void ssl_transform_free( ssl_transform *transform ) |
| { |
| #if defined(POLARSSL_ZLIB_SUPPORT) |
| deflateEnd( &transform->ctx_deflate ); |
| inflateEnd( &transform->ctx_inflate ); |
| #endif |
| |
| cipher_free_ctx( &transform->cipher_ctx_enc ); |
| cipher_free_ctx( &transform->cipher_ctx_dec ); |
| |
| md_free_ctx( &transform->md_ctx_enc ); |
| md_free_ctx( &transform->md_ctx_dec ); |
| |
| memset( transform, 0, sizeof( ssl_transform ) ); |
| } |
| |
| #if defined(POLARSSL_X509_CRT_PARSE_C) |
| static void ssl_key_cert_free( ssl_key_cert *key_cert ) |
| { |
| ssl_key_cert *cur = key_cert, *next; |
| |
| while( cur != NULL ) |
| { |
| next = cur->next; |
| |
| if( cur->key_own_alloc ) |
| { |
| pk_free( cur->key ); |
| polarssl_free( cur->key ); |
| } |
| polarssl_free( cur ); |
| |
| cur = next; |
| } |
| } |
| #endif /* POLARSSL_X509_CRT_PARSE_C */ |
| |
| void ssl_handshake_free( ssl_handshake_params *handshake ) |
| { |
| #if defined(POLARSSL_DHM_C) |
| dhm_free( &handshake->dhm_ctx ); |
| #endif |
| #if defined(POLARSSL_ECDH_C) |
| ecdh_free( &handshake->ecdh_ctx ); |
| #endif |
| |
| #if defined(POLARSSL_ECDH_C) || defined(POLARSSL_ECDSA_C) |
| /* explicit void pointer cast for buggy MS compiler */ |
| polarssl_free( (void *) handshake->curves ); |
| #endif |
| |
| #if defined(POLARSSL_X509_CRT_PARSE_C) && \ |
| defined(POLARSSL_SSL_SERVER_NAME_INDICATION) |
| /* |
| * Free only the linked list wrapper, not the keys themselves |
| * since the belong to the SNI callback |
| */ |
| if( handshake->sni_key_cert != NULL ) |
| { |
| ssl_key_cert *cur = handshake->sni_key_cert, *next; |
| |
| while( cur != NULL ) |
| { |
| next = cur->next; |
| polarssl_free( cur ); |
| cur = next; |
| } |
| } |
| #endif /* POLARSSL_X509_CRT_PARSE_C && POLARSSL_SSL_SERVER_NAME_INDICATION */ |
| |
| memset( handshake, 0, sizeof( ssl_handshake_params ) ); |
| } |
| |
| void ssl_session_free( ssl_session *session ) |
| { |
| #if defined(POLARSSL_X509_CRT_PARSE_C) |
| if( session->peer_cert != NULL ) |
| { |
| x509_crt_free( session->peer_cert ); |
| polarssl_free( session->peer_cert ); |
| } |
| #endif |
| |
| #if defined(POLARSSL_SSL_SESSION_TICKETS) |
| polarssl_free( session->ticket ); |
| #endif |
| |
| memset( session, 0, sizeof( ssl_session ) ); |
| } |
| |
| /* |
| * Free an SSL context |
| */ |
| void ssl_free( ssl_context *ssl ) |
| { |
| SSL_DEBUG_MSG( 2, ( "=> free" ) ); |
| |
| if( ssl->out_ctr != NULL ) |
| { |
| memset( ssl->out_ctr, 0, SSL_BUFFER_LEN ); |
| polarssl_free( ssl->out_ctr ); |
| } |
| |
| if( ssl->in_ctr != NULL ) |
| { |
| memset( ssl->in_ctr, 0, SSL_BUFFER_LEN ); |
| polarssl_free( ssl->in_ctr ); |
| } |
| |
| #if defined(POLARSSL_ZLIB_SUPPORT) |
| if( ssl->compress_buf != NULL ) |
| { |
| memset( ssl->compress_buf, 0, SSL_BUFFER_LEN ); |
| polarssl_free( ssl->compress_buf ); |
| } |
| #endif |
| |
| #if defined(POLARSSL_DHM_C) |
| mpi_free( &ssl->dhm_P ); |
| mpi_free( &ssl->dhm_G ); |
| #endif |
| |
| if( ssl->transform ) |
| { |
| ssl_transform_free( ssl->transform ); |
| polarssl_free( ssl->transform ); |
| } |
| |
| if( ssl->handshake ) |
| { |
| ssl_handshake_free( ssl->handshake ); |
| ssl_transform_free( ssl->transform_negotiate ); |
| ssl_session_free( ssl->session_negotiate ); |
| |
| polarssl_free( ssl->handshake ); |
| polarssl_free( ssl->transform_negotiate ); |
| polarssl_free( ssl->session_negotiate ); |
| } |
| |
| if( ssl->session ) |
| { |
| ssl_session_free( ssl->session ); |
| polarssl_free( ssl->session ); |
| } |
| |
| #if defined(POLARSSL_SSL_SESSION_TICKETS) |
| polarssl_free( ssl->ticket_keys ); |
| #endif |
| |
| #if defined(POLARSSL_SSL_SERVER_NAME_INDICATION) |
| if ( ssl->hostname != NULL ) |
| { |
| memset( ssl->hostname, 0, ssl->hostname_len ); |
| polarssl_free( ssl->hostname ); |
| ssl->hostname_len = 0; |
| } |
| #endif |
| |
| #if defined(POLARSSL_KEY_EXCHANGE__SOME__PSK_ENABLED) |
| if( ssl->psk != NULL ) |
| { |
| memset( ssl->psk, 0, ssl->psk_len ); |
| memset( ssl->psk_identity, 0, ssl->psk_identity_len ); |
| polarssl_free( ssl->psk ); |
| polarssl_free( ssl->psk_identity ); |
| ssl->psk_len = 0; |
| ssl->psk_identity_len = 0; |
| } |
| #endif |
| |
| #if defined(POLARSSL_X509_CRT_PARSE_C) |
| ssl_key_cert_free( ssl->key_cert ); |
| #endif |
| |
| #if defined(POLARSSL_SSL_HW_RECORD_ACCEL) |
| if( ssl_hw_record_finish != NULL ) |
| { |
| SSL_DEBUG_MSG( 2, ( "going for ssl_hw_record_finish()" ) ); |
| ssl_hw_record_finish( ssl ); |
| } |
| #endif |
| |
| SSL_DEBUG_MSG( 2, ( "<= free" ) ); |
| |
| /* Actually clear after last debug message */ |
| memset( ssl, 0, sizeof( ssl_context ) ); |
| } |
| |
| #if defined(POLARSSL_PK_C) |
| /* |
| * Convert between POLARSSL_PK_XXX and SSL_SIG_XXX |
| */ |
| unsigned char ssl_sig_from_pk( pk_context *pk ) |
| { |
| #if defined(POLARSSL_RSA_C) |
| if( pk_can_do( pk, POLARSSL_PK_RSA ) ) |
| return( SSL_SIG_RSA ); |
| #endif |
| #if defined(POLARSSL_ECDSA_C) |
| if( pk_can_do( pk, POLARSSL_PK_ECDSA ) ) |
| return( SSL_SIG_ECDSA ); |
| #endif |
| return( SSL_SIG_ANON ); |
| } |
| |
| pk_type_t ssl_pk_alg_from_sig( unsigned char sig ) |
| { |
| switch( sig ) |
| { |
| #if defined(POLARSSL_RSA_C) |
| case SSL_SIG_RSA: |
| return( POLARSSL_PK_RSA ); |
| #endif |
| #if defined(POLARSSL_ECDSA_C) |
| case SSL_SIG_ECDSA: |
| return( POLARSSL_PK_ECDSA ); |
| #endif |
| default: |
| return( POLARSSL_PK_NONE ); |
| } |
| } |
| #endif /* POLARSSL_PK_C */ |
| |
| /* |
| * Convert between SSL_HASH_XXX and POLARSSL_MD_XXX |
| */ |
| md_type_t ssl_md_alg_from_hash( unsigned char hash ) |
| { |
| switch( hash ) |
| { |
| #if defined(POLARSSL_MD5_C) |
| case SSL_HASH_MD5: |
| return( POLARSSL_MD_MD5 ); |
| #endif |
| #if defined(POLARSSL_SHA1_C) |
| case SSL_HASH_SHA1: |
| return( POLARSSL_MD_SHA1 ); |
| #endif |
| #if defined(POLARSSL_SHA256_C) |
| case SSL_HASH_SHA224: |
| return( POLARSSL_MD_SHA224 ); |
| case SSL_HASH_SHA256: |
| return( POLARSSL_MD_SHA256 ); |
| #endif |
| #if defined(POLARSSL_SHA512_C) |
| case SSL_HASH_SHA384: |
| return( POLARSSL_MD_SHA384 ); |
| case SSL_HASH_SHA512: |
| return( POLARSSL_MD_SHA512 ); |
| #endif |
| default: |
| return( POLARSSL_MD_NONE ); |
| } |
| } |
| |
| #if defined(POLARSSL_SSL_SET_CURVES) |
| /* |
| * Check is a curve proposed by the peer is in our list. |
| * Return 1 if we're willing to use it, 0 otherwise. |
| */ |
| int ssl_curve_is_acceptable( const ssl_context *ssl, ecp_group_id grp_id ) |
| { |
| const ecp_group_id *gid; |
| |
| for( gid = ssl->curve_list; *gid != POLARSSL_ECP_DP_NONE; gid++ ) |
| if( *gid == grp_id ) |
| return( 1 ); |
| |
| return( 0 ); |
| } |
| #endif /* POLARSSL_SSL_SET_CURVES */ |
| |
| #if defined(POLARSSL_X509_CRT_PARSE_C) |
| int ssl_check_cert_usage( const x509_crt *cert, |
| const ssl_ciphersuite_t *ciphersuite, |
| int cert_endpoint ) |
| { |
| #if defined(POLARSSL_X509_CHECK_KEY_USAGE) |
| int usage = 0; |
| #endif |
| #if defined(POLARSSL_X509_CHECK_EXTENDED_KEY_USAGE) |
| const char *ext_oid; |
| size_t ext_len; |
| #endif |
| |
| #if !defined(POLARSSL_X509_CHECK_KEY_USAGE) && \ |
| !defined(POLARSSL_X509_CHECK_EXTENDED_KEY_USAGE) |
| ((void) cert); |
| ((void) cert_endpoint); |
| #endif |
| |
| #if defined(POLARSSL_X509_CHECK_KEY_USAGE) |
| if( cert_endpoint == SSL_IS_SERVER ) |
| { |
| /* Server part of the key exchange */ |
| switch( ciphersuite->key_exchange ) |
| { |
| case POLARSSL_KEY_EXCHANGE_RSA: |
| case POLARSSL_KEY_EXCHANGE_RSA_PSK: |
| usage = KU_KEY_ENCIPHERMENT; |
| break; |
| |
| case POLARSSL_KEY_EXCHANGE_DHE_RSA: |
| case POLARSSL_KEY_EXCHANGE_ECDHE_RSA: |
| case POLARSSL_KEY_EXCHANGE_ECDHE_ECDSA: |
| usage = KU_DIGITAL_SIGNATURE; |
| break; |
| |
| case POLARSSL_KEY_EXCHANGE_ECDH_RSA: |
| case POLARSSL_KEY_EXCHANGE_ECDH_ECDSA: |
| usage = KU_KEY_AGREEMENT; |
| break; |
| |
| /* Don't use default: we want warnings when adding new values */ |
| case POLARSSL_KEY_EXCHANGE_NONE: |
| case POLARSSL_KEY_EXCHANGE_PSK: |
| case POLARSSL_KEY_EXCHANGE_DHE_PSK: |
| case POLARSSL_KEY_EXCHANGE_ECDHE_PSK: |
| usage = 0; |
| } |
| } |
| else |
| { |
| /* Client auth: we only implement rsa_sign and ecdsa_sign for now */ |
| usage = KU_DIGITAL_SIGNATURE; |
| } |
| |
| if( x509_crt_check_key_usage( cert, usage ) != 0 ) |
| return( -1 ); |
| #else |
| ((void) ciphersuite); |
| #endif /* POLARSSL_X509_CHECK_KEY_USAGE */ |
| |
| #if defined(POLARSSL_X509_CHECK_EXTENDED_KEY_USAGE) |
| if( cert_endpoint == SSL_IS_SERVER ) |
| { |
| ext_oid = OID_SERVER_AUTH; |
| ext_len = OID_SIZE( OID_SERVER_AUTH ); |
| } |
| else |
| { |
| ext_oid = OID_CLIENT_AUTH; |
| ext_len = OID_SIZE( OID_CLIENT_AUTH ); |
| } |
| |
| if( x509_crt_check_extended_key_usage( cert, ext_oid, ext_len ) != 0 ) |
| return( -1 ); |
| #endif /* POLARSSL_X509_CHECK_EXTENDED_KEY_USAGE */ |
| |
| return( 0 ); |
| } |
| #endif /* POLARSSL_X509_CRT_PARSE_C */ |
| |
| #endif /* POLARSSL_SSL_TLS_C */ |