| |
| To install as a Loadable Kernel Module (LKM): |
| |
| 1. do a "make solaris" in this directory |
| |
| 2. Run the script "SunOS4/minstall" as root. |
| |
| 3. change directory to SunOS4 and run "make install" |
| |
| 4. Reboot using the new kernel |
| |
| 5. use modload(8) to load the packet filter with: |
| modload if_ipl.o |
| |
| 6. do "modstat" to confirm that it has been loaded successfully. |
| |
| There is no need to use mknod to create the device in /dev; |
| - upon loading the module, it will create itself with the correct |
| values, under the name (IPL_NAME) from the Makefile. It will |
| also remove itself from /dev when it is modunload'd. |
| |
| |
| To install as part of a SunOS 4.1.x kernel: |
| |
| 1. do a "make solaris" in this directory |
| |
| 2. Run the script "SunOS4/kinstall" as root. |
| NOTE: This script sets up /dev/ipl as char. device 59,0 |
| in /sys/sun/conf.c |
| |
| 3. Run the following commands as root: |
| mknod /dev/ipl c 59 0 |
| mknod /dev/ipnat c 59 1 |
| mknod /dev/ipstate c 59 2 |
| mknod /dev/ipauth c 59 3 |
| |
| 4. Reboot using the new kernel |
| |
| Darren Reed |
| darrenr@pobox.com |