| /* |
| * Copyright (C) 2002-2003 by Ryan Beasley <ryanb@goddamnbastard.org> |
| * |
| * See the IPFILTER.LICENCE file for details on licencing. |
| */ |
| /* |
| * Overview: |
| * This is an in-kernel application proxy for Sun's RPCBIND (nee portmap) |
| * protocol as defined in RFC1833. It is far from complete, mostly |
| * lacking in less-likely corner cases, but it's definitely functional. |
| * |
| * Invocation: |
| * rdr <int> <e_ip>/32 port <e_p> -> <i_ip> port <i_p> udp proxy rpcbu |
| * |
| * If the host running IP Filter is the same as the RPC server, it's |
| * perfectly legal for both the internal and external addresses and ports |
| * to match. |
| * |
| * When triggered by appropriate IP NAT rules, this proxy works by |
| * examining data contained in received packets. Requests and replies are |
| * modified, NAT and state table entries created, etc., as necessary. |
| */ |
| /* |
| * TODO / NOTES |
| * |
| * o Must implement locking to protect proxy session data. |
| * o Fragmentation isn't supported. |
| * o Only supports UDP. |
| * o Doesn't support multiple RPC records in a single request. |
| * o Errors should be more fine-grained. (e.g., malloc failure vs. |
| * illegal RPCB request / reply) |
| * o Even with the limit on the total amount of recorded transactions, |
| * should there be a timeout on transaction removal? |
| * o There is a potential collision between cloning, wildcard NAT and |
| * state entries. There should be an appr_getport routine for |
| * to avoid this. |
| * o The enclosed hack of STREAMS support is pretty sick and most likely |
| * broken. |
| * |
| * $Id$ |
| */ |
| |
| #define IPF_RPCB_PROXY |
| |
| /* |
| * Function prototypes |
| */ |
| int ippr_rpcb_init __P((void)); |
| void ippr_rpcb_fini __P((void)); |
| int ippr_rpcb_new __P((fr_info_t *, ap_session_t *, nat_t *)); |
| void ippr_rpcb_del __P((ap_session_t *)); |
| int ippr_rpcb_in __P((fr_info_t *, ap_session_t *, nat_t *)); |
| int ippr_rpcb_out __P((fr_info_t *, ap_session_t *, nat_t *)); |
| |
| static void ippr_rpcb_flush __P((rpcb_session_t *)); |
| static int ippr_rpcb_decodereq __P((fr_info_t *, nat_t *, |
| rpcb_session_t *, rpc_msg_t *)); |
| static int ippr_rpcb_skipauth __P((rpc_msg_t *, xdr_auth_t *, u_32_t **)); |
| static int ippr_rpcb_insert __P((rpcb_session_t *, rpcb_xact_t *)); |
| static int ippr_rpcb_xdrrpcb __P((rpc_msg_t *, u_32_t *, rpcb_args_t *)); |
| static int ippr_rpcb_getuaddr __P((rpc_msg_t *, xdr_uaddr_t *, |
| u_32_t **)); |
| static u_int ippr_rpcb_atoi __P((char *)); |
| static int ippr_rpcb_modreq __P((fr_info_t *, nat_t *, rpc_msg_t *, |
| mb_t *, u_int)); |
| static int ippr_rpcb_decoderep __P((fr_info_t *, nat_t *, |
| rpcb_session_t *, rpc_msg_t *, rpcb_xact_t **)); |
| static rpcb_xact_t * ippr_rpcb_lookup __P((rpcb_session_t *, u_32_t)); |
| static void ippr_rpcb_deref __P((rpcb_session_t *, rpcb_xact_t *)); |
| static int ippr_rpcb_getproto __P((rpc_msg_t *, xdr_proto_t *, |
| u_32_t **)); |
| static int ippr_rpcb_getnat __P((fr_info_t *, nat_t *, u_int, u_int)); |
| static int ippr_rpcb_modv3 __P((fr_info_t *, nat_t *, rpc_msg_t *, |
| mb_t *, u_int)); |
| static int ippr_rpcb_modv4 __P((fr_info_t *, nat_t *, rpc_msg_t *, |
| mb_t *, u_int)); |
| static void ippr_rpcb_fixlen __P((fr_info_t *, int)); |
| |
| /* |
| * Global variables |
| */ |
| static frentry_t rpcbfr; /* Skeleton rule for reference by entities |
| this proxy creates. */ |
| static int rpcbcnt; /* Upper bound of allocated RPCB sessions. */ |
| /* XXX rpcbcnt still requires locking. */ |
| |
| int rpcb_proxy_init = 0; |
| |
| |
| /* |
| * Since rpc_msg contains only pointers, one should use this macro as a |
| * handy way to get to the goods. (In case you're wondering about the name, |
| * this started as BYTEREF -> BREF -> B.) |
| */ |
| #define B(r) (u_32_t)ntohl(*(r)) |
| |
| /* |
| * Public subroutines |
| */ |
| |
| /* -------------------------------------------------------------------- */ |
| /* Function: ippr_rpcb_init */ |
| /* Returns: int - 0 == success */ |
| /* Parameters: (void) */ |
| /* */ |
| /* Initialize the filter rule entry and session limiter. */ |
| /* -------------------------------------------------------------------- */ |
| int |
| ippr_rpcb_init() |
| { |
| rpcbcnt = 0; |
| |
| bzero((char *)&rpcbfr, sizeof(rpcbfr)); |
| rpcbfr.fr_ref = 1; |
| rpcbfr.fr_flags = FR_PASS|FR_QUICK|FR_KEEPSTATE; |
| MUTEX_INIT(&rpcbfr.fr_lock, "ipf Sun RPCB proxy rule lock"); |
| rpcb_proxy_init = 1; |
| |
| return(0); |
| } |
| |
| /* -------------------------------------------------------------------- */ |
| /* Function: ippr_rpcb_fini */ |
| /* Returns: void */ |
| /* Parameters: (void) */ |
| /* */ |
| /* Destroy rpcbfr's mutex to avoid a lock leak. */ |
| /* -------------------------------------------------------------------- */ |
| void |
| ippr_rpcb_fini() |
| { |
| if (rpcb_proxy_init == 1) { |
| MUTEX_DESTROY(&rpcbfr.fr_lock); |
| rpcb_proxy_init = 0; |
| } |
| } |
| |
| /* -------------------------------------------------------------------- */ |
| /* Function: ippr_rpcb_new */ |
| /* Returns: int - -1 == failure, 0 == success */ |
| /* Parameters: fin(I) - pointer to packet information */ |
| /* aps(I) - pointer to proxy session structure */ |
| /* nat(I) - pointer to NAT session structure */ |
| /* */ |
| /* Allocate resources for per-session proxy structures. */ |
| /* -------------------------------------------------------------------- */ |
| int |
| ippr_rpcb_new(fin, aps, nat) |
| fr_info_t *fin; |
| ap_session_t *aps; |
| nat_t *nat; |
| { |
| rpcb_session_t *rs; |
| |
| fin = fin; /* LINT */ |
| nat = nat; /* LINT */ |
| |
| KMALLOC(rs, rpcb_session_t *); |
| if (rs == NULL) |
| return(-1); |
| |
| bzero((char *)rs, sizeof(*rs)); |
| MUTEX_INIT(&rs->rs_rxlock, "ipf Sun RPCB proxy session lock"); |
| |
| aps->aps_data = rs; |
| |
| return(0); |
| } |
| |
| /* -------------------------------------------------------------------- */ |
| /* Function: ippr_rpcb_del */ |
| /* Returns: void */ |
| /* Parameters: aps(I) - pointer to proxy session structure */ |
| /* */ |
| /* Free up a session's list of RPCB requests. */ |
| /* -------------------------------------------------------------------- */ |
| void |
| ippr_rpcb_del(aps) |
| ap_session_t *aps; |
| { |
| rpcb_session_t *rs; |
| rs = (rpcb_session_t *)aps->aps_data; |
| |
| MUTEX_ENTER(&rs->rs_rxlock); |
| ippr_rpcb_flush(rs); |
| MUTEX_EXIT(&rs->rs_rxlock); |
| MUTEX_DESTROY(&rs->rs_rxlock); |
| } |
| |
| /* -------------------------------------------------------------------- */ |
| /* Function: ippr_rpcb_in */ |
| /* Returns: int - APR_ERR(1) == drop the packet, */ |
| /* APR_ERR(2) == kill the proxy session, */ |
| /* else change in packet length (in bytes) */ |
| /* Parameters: fin(I) - pointer to packet information */ |
| /* ip(I) - pointer to packet header */ |
| /* aps(I) - pointer to proxy session structure */ |
| /* nat(I) - pointer to NAT session structure */ |
| /* */ |
| /* Given a presumed RPCB request, perform some minor tests and pass off */ |
| /* for decoding. Also pass packet off for a rewrite if necessary. */ |
| /* -------------------------------------------------------------------- */ |
| int |
| ippr_rpcb_in(fin, aps, nat) |
| fr_info_t *fin; |
| ap_session_t *aps; |
| nat_t *nat; |
| { |
| rpc_msg_t rpcmsg, *rm; |
| rpcb_session_t *rs; |
| u_int off, dlen; |
| mb_t *m; |
| int rv; |
| |
| /* Disallow fragmented or illegally short packets. */ |
| if ((fin->fin_flx & (FI_FRAG|FI_SHORT)) != 0) |
| return(APR_ERR(1)); |
| |
| /* Perform basic variable initialization. */ |
| rs = (rpcb_session_t *)aps->aps_data; |
| |
| m = fin->fin_m; |
| off = (char *)fin->fin_dp - (char *)fin->fin_ip; |
| off += sizeof(udphdr_t) + fin->fin_ipoff; |
| dlen = fin->fin_dlen - sizeof(udphdr_t); |
| |
| /* Disallow packets outside legal range for supported requests. */ |
| if ((dlen < RPCB_REQMIN) || (dlen > RPCB_REQMAX)) |
| return(APR_ERR(1)); |
| |
| /* Copy packet over to convenience buffer. */ |
| rm = &rpcmsg; |
| bzero((char *)rm, sizeof(*rm)); |
| COPYDATA(m, off, dlen, (caddr_t)&rm->rm_msgbuf); |
| rm->rm_buflen = dlen; |
| |
| /* Send off to decode request. */ |
| rv = ippr_rpcb_decodereq(fin, nat, rs, rm); |
| |
| switch(rv) |
| { |
| case -1: |
| return(APR_ERR(1)); |
| /*NOTREACHED*/ |
| break; |
| case 0: |
| break; |
| case 1: |
| rv = ippr_rpcb_modreq(fin, nat, rm, m, off); |
| break; |
| default: |
| /*CONSTANTCONDITION*/ |
| IPF_PANIC(1, ("illegal rv %d (ippr_rpcb_req)", rv)); |
| } |
| |
| return(rv); |
| } |
| |
| /* -------------------------------------------------------------------- */ |
| /* Function: ippr_rpcb_out */ |
| /* Returns: int - APR_ERR(1) == drop the packet, */ |
| /* APR_ERR(2) == kill the proxy session, */ |
| /* else change in packet length (in bytes) */ |
| /* Parameters: fin(I) - pointer to packet information */ |
| /* ip(I) - pointer to packet header */ |
| /* aps(I) - pointer to proxy session structure */ |
| /* nat(I) - pointer to NAT session structure */ |
| /* */ |
| /* Given a presumed RPCB reply, perform some minor tests and pass off */ |
| /* for decoding. If the message indicates a successful request with */ |
| /* valid addressing information, create NAT and state structures to */ |
| /* allow direct communication between RPC client and server. */ |
| /* -------------------------------------------------------------------- */ |
| int |
| ippr_rpcb_out(fin, aps, nat) |
| fr_info_t *fin; |
| ap_session_t *aps; |
| nat_t *nat; |
| { |
| rpc_msg_t rpcmsg, *rm; |
| rpcb_session_t *rs; |
| rpcb_xact_t *rx; |
| u_int off, dlen; |
| int rv, diff; |
| mb_t *m; |
| |
| /* Disallow fragmented or illegally short packets. */ |
| if ((fin->fin_flx & (FI_FRAG|FI_SHORT)) != 0) |
| return(APR_ERR(1)); |
| |
| /* Perform basic variable initialization. */ |
| rs = (rpcb_session_t *)aps->aps_data; |
| rx = NULL; |
| |
| m = fin->fin_m; |
| off = (char *)fin->fin_dp - (char *)fin->fin_ip; |
| off += sizeof(udphdr_t) + fin->fin_ipoff; |
| dlen = fin->fin_dlen - sizeof(udphdr_t); |
| diff = 0; |
| |
| /* Disallow packets outside legal range for supported requests. */ |
| if ((dlen < RPCB_REPMIN) || (dlen > RPCB_REPMAX)) |
| return(APR_ERR(1)); |
| |
| /* Copy packet over to convenience buffer. */ |
| rm = &rpcmsg; |
| bzero((char *)rm, sizeof(*rm)); |
| COPYDATA(m, off, dlen, (caddr_t)&rm->rm_msgbuf); |
| rm->rm_buflen = dlen; |
| |
| rx = NULL; /* XXX gcc */ |
| |
| /* Send off to decode reply. */ |
| rv = ippr_rpcb_decoderep(fin, nat, rs, rm, &rx); |
| |
| switch(rv) |
| { |
| case -1: /* Bad packet */ |
| if (rx != NULL) { |
| MUTEX_ENTER(&rs->rs_rxlock); |
| ippr_rpcb_deref(rs, rx); |
| MUTEX_EXIT(&rs->rs_rxlock); |
| } |
| return(APR_ERR(1)); |
| /*NOTREACHED*/ |
| break; |
| case 0: /* Negative reply / request rejected */ |
| break; |
| case 1: /* Positive reply */ |
| /* |
| * With the IP address embedded in a GETADDR(LIST) reply, |
| * we'll need to rewrite the packet in the very possible |
| * event that the internal & external addresses aren't the |
| * same. (i.e., this box is either a router or rpcbind |
| * only listens on loopback.) |
| */ |
| if (nat->nat_inip.s_addr != nat->nat_outip.s_addr) { |
| if (rx->rx_type == RPCB_RES_STRING) |
| diff = ippr_rpcb_modv3(fin, nat, rm, m, off); |
| else if (rx->rx_type == RPCB_RES_LIST) |
| diff = ippr_rpcb_modv4(fin, nat, rm, m, off); |
| } |
| break; |
| default: |
| /*CONSTANTCONDITION*/ |
| IPF_PANIC(1, ("illegal rv %d (ippr_rpcb_decoderep)", rv)); |
| } |
| |
| if (rx != NULL) { |
| MUTEX_ENTER(&rs->rs_rxlock); |
| /* XXX Gross hack - I'm overloading the reference |
| * counter to deal with both threads and retransmitted |
| * requests. One deref signals that this thread is |
| * finished with rx, and the other signals that we've |
| * processed its reply. |
| */ |
| ippr_rpcb_deref(rs, rx); |
| ippr_rpcb_deref(rs, rx); |
| MUTEX_EXIT(&rs->rs_rxlock); |
| } |
| |
| return(diff); |
| } |
| |
| /* |
| * Private support subroutines |
| */ |
| |
| /* -------------------------------------------------------------------- */ |
| /* Function: ippr_rpcb_flush */ |
| /* Returns: void */ |
| /* Parameters: rs(I) - pointer to RPCB session structure */ |
| /* */ |
| /* Simply flushes the list of outstanding transactions, if any. */ |
| /* -------------------------------------------------------------------- */ |
| static void |
| ippr_rpcb_flush(rs) |
| rpcb_session_t *rs; |
| { |
| rpcb_xact_t *r1, *r2; |
| |
| r1 = rs->rs_rxlist; |
| if (r1 == NULL) |
| return; |
| |
| while (r1 != NULL) { |
| r2 = r1; |
| r1 = r1->rx_next; |
| KFREE(r2); |
| } |
| } |
| |
| /* -------------------------------------------------------------------- */ |
| /* Function: ippr_rpcb_decodereq */ |
| /* Returns: int - -1 == bad request or critical failure, */ |
| /* 0 == request successfully decoded, */ |
| /* 1 == request successfully decoded; requires */ |
| /* address rewrite/modification */ |
| /* Parameters: fin(I) - pointer to packet information */ |
| /* nat(I) - pointer to NAT session structure */ |
| /* rs(I) - pointer to RPCB session structure */ |
| /* rm(I) - pointer to RPC message structure */ |
| /* */ |
| /* Take a presumed RPCB request, decode it, and store the results in */ |
| /* the transaction list. If the internal target address needs to be */ |
| /* modified, store its location in ptr. */ |
| /* WARNING: It's the responsibility of the caller to make sure there */ |
| /* is enough room in rs_buf for the basic RPC message "preamble". */ |
| /* -------------------------------------------------------------------- */ |
| static int |
| ippr_rpcb_decodereq(fin, nat, rs, rm) |
| fr_info_t *fin; |
| nat_t *nat; |
| rpcb_session_t *rs; |
| rpc_msg_t *rm; |
| { |
| rpcb_args_t *ra; |
| u_32_t xdr, *p; |
| rpc_call_t *rc; |
| rpcb_xact_t rx; |
| int mod; |
| |
| p = (u_32_t *)rm->rm_msgbuf; |
| mod = 0; |
| |
| bzero((char *)&rx, sizeof(rx)); |
| rc = &rm->rm_call; |
| |
| rm->rm_xid = p; |
| rx.rx_xid = B(p++); /* Record this message's XID. */ |
| |
| /* Parse out and test the RPC header. */ |
| if ((B(p++) != RPCB_CALL) || |
| (B(p++) != RPCB_MSG_VERSION) || |
| (B(p++) != RPCB_PROG)) |
| return(-1); |
| |
| /* Record the RPCB version and procedure. */ |
| rc->rc_vers = p++; |
| rc->rc_proc = p++; |
| |
| /* Bypass RPC authentication stuff. */ |
| if (ippr_rpcb_skipauth(rm, &rc->rc_authcred, &p) != 0) |
| return(-1); |
| if (ippr_rpcb_skipauth(rm, &rc->rc_authverf, &p) != 0) |
| return(-1); |
| |
| /* Compare RPCB version and procedure numbers. */ |
| switch(B(rc->rc_vers)) |
| { |
| case 2: |
| /* This proxy only supports PMAP_GETPORT. */ |
| if (B(rc->rc_proc) != RPCB_GETPORT) |
| return(-1); |
| |
| /* Portmap requests contain four 4 byte parameters. */ |
| if (RPCB_BUF_EQ(rm, p, 16) == 0) |
| return(-1); |
| |
| p += 2; /* Skip requested program and version numbers. */ |
| |
| /* Sanity check the requested protocol. */ |
| xdr = B(p); |
| if (!(xdr == IPPROTO_UDP || xdr == IPPROTO_TCP)) |
| return(-1); |
| |
| rx.rx_type = RPCB_RES_PMAP; |
| rx.rx_proto = xdr; |
| break; |
| case 3: |
| case 4: |
| /* GETADDRLIST is exclusive to v4; GETADDR for v3 & v4 */ |
| switch(B(rc->rc_proc)) |
| { |
| case RPCB_GETADDR: |
| rx.rx_type = RPCB_RES_STRING; |
| rx.rx_proto = (u_int)fin->fin_p; |
| break; |
| case RPCB_GETADDRLIST: |
| if (B(rc->rc_vers) != 4) |
| return(-1); |
| rx.rx_type = RPCB_RES_LIST; |
| break; |
| default: |
| return(-1); |
| } |
| |
| ra = &rc->rc_rpcbargs; |
| |
| /* Decode the 'struct rpcb' request. */ |
| if (ippr_rpcb_xdrrpcb(rm, p, ra) != 0) |
| return(-1); |
| |
| /* Are the target address & port valid? */ |
| if ((ra->ra_maddr.xu_ip != nat->nat_outip.s_addr) || |
| (ra->ra_maddr.xu_port != nat->nat_outport)) |
| return(-1); |
| |
| /* Do we need to rewrite this packet? */ |
| if ((nat->nat_outip.s_addr != nat->nat_inip.s_addr) || |
| (nat->nat_outport != nat->nat_inport)) |
| mod = 1; |
| break; |
| default: |
| return(-1); |
| } |
| |
| MUTEX_ENTER(&rs->rs_rxlock); |
| if (ippr_rpcb_insert(rs, &rx) != 0) { |
| MUTEX_EXIT(&rs->rs_rxlock); |
| return(-1); |
| } |
| MUTEX_EXIT(&rs->rs_rxlock); |
| |
| return(mod); |
| } |
| |
| /* -------------------------------------------------------------------- */ |
| /* Function: ippr_rpcb_skipauth */ |
| /* Returns: int -- -1 == illegal auth parameters (lengths) */ |
| /* 0 == valid parameters, pointer advanced */ |
| /* Parameters: rm(I) - pointer to RPC message structure */ |
| /* auth(I) - pointer to RPC auth structure */ |
| /* buf(IO) - pointer to location within convenience buffer */ |
| /* */ |
| /* Record auth data length & location of auth data, then advance past */ |
| /* it. */ |
| /* -------------------------------------------------------------------- */ |
| static int |
| ippr_rpcb_skipauth(rm, auth, buf) |
| rpc_msg_t *rm; |
| xdr_auth_t *auth; |
| u_32_t **buf; |
| { |
| u_32_t *p, xdr; |
| |
| p = *buf; |
| |
| /* Make sure we have enough space for expected fixed auth parms. */ |
| if (RPCB_BUF_GEQ(rm, p, 8) == 0) |
| return(-1); |
| |
| p++; /* We don't care about auth_flavor. */ |
| |
| auth->xa_string.xs_len = p; |
| xdr = B(p++); /* Length of auth_data */ |
| |
| /* Test for absurdity / illegality of auth_data length. */ |
| if ((XDRALIGN(xdr) < xdr) || (RPCB_BUF_GEQ(rm, p, XDRALIGN(xdr)) == 0)) |
| return(-1); |
| |
| auth->xa_string.xs_str = (char *)p; |
| |
| p += XDRALIGN(xdr); /* Advance our location. */ |
| |
| *buf = (u_32_t *)p; |
| |
| return(0); |
| } |
| |
| /* -------------------------------------------------------------------- */ |
| /* Function: ippr_rpcb_insert */ |
| /* Returns: int -- -1 == list insertion failed, */ |
| /* 0 == item successfully added */ |
| /* Parameters: rs(I) - pointer to RPCB session structure */ |
| /* rx(I) - pointer to RPCB transaction structure */ |
| /* -------------------------------------------------------------------- */ |
| static int |
| ippr_rpcb_insert(rs, rx) |
| rpcb_session_t *rs; |
| rpcb_xact_t *rx; |
| { |
| rpcb_xact_t *rxp; |
| |
| rxp = ippr_rpcb_lookup(rs, rx->rx_xid); |
| if (rxp != NULL) { |
| ++rxp->rx_ref; |
| return(0); |
| } |
| |
| if (rpcbcnt == RPCB_MAXREQS) |
| return(-1); |
| |
| KMALLOC(rxp, rpcb_xact_t *); |
| if (rxp == NULL) |
| return(-1); |
| |
| bcopy((char *)rx, (char *)rxp, sizeof(*rx)); |
| |
| if (rs->rs_rxlist != NULL) |
| rs->rs_rxlist->rx_pnext = &rxp->rx_next; |
| |
| rxp->rx_pnext = &rs->rs_rxlist; |
| rxp->rx_next = rs->rs_rxlist; |
| rs->rs_rxlist = rxp; |
| |
| rxp->rx_ref = 1; |
| |
| ++rpcbcnt; |
| |
| return(0); |
| } |
| |
| /* -------------------------------------------------------------------- */ |
| /* Function: ippr_rpcb_xdrrpcb */ |
| /* Returns: int -- -1 == failure to properly decode the request */ |
| /* 0 == rpcb successfully decoded */ |
| /* Parameters: rs(I) - pointer to RPCB session structure */ |
| /* p(I) - pointer to location within session buffer */ |
| /* rpcb(O) - pointer to rpcb (xdr type) structure */ |
| /* */ |
| /* Decode a XDR encoded rpcb structure and record its contents in rpcb */ |
| /* within only the context of TCP/UDP over IP networks. */ |
| /* -------------------------------------------------------------------- */ |
| static int |
| ippr_rpcb_xdrrpcb(rm, p, ra) |
| rpc_msg_t *rm; |
| u_32_t *p; |
| rpcb_args_t *ra; |
| { |
| if (!RPCB_BUF_GEQ(rm, p, 20)) |
| return(-1); |
| |
| /* Bypass target program & version. */ |
| p += 2; |
| |
| /* Decode r_netid. Must be "tcp" or "udp". */ |
| if (ippr_rpcb_getproto(rm, &ra->ra_netid, &p) != 0) |
| return(-1); |
| |
| /* Decode r_maddr. */ |
| if (ippr_rpcb_getuaddr(rm, &ra->ra_maddr, &p) != 0) |
| return(-1); |
| |
| /* Advance to r_owner and make sure it's empty. */ |
| if (!RPCB_BUF_EQ(rm, p, 4) || (B(p) != 0)) |
| return(-1); |
| |
| return(0); |
| } |
| |
| /* -------------------------------------------------------------------- */ |
| /* Function: ippr_rpcb_getuaddr */ |
| /* Returns: int -- -1 == illegal string, */ |
| /* 0 == string parsed; contents recorded */ |
| /* Parameters: rm(I) - pointer to RPC message structure */ |
| /* xu(I) - pointer to universal address structure */ |
| /* p(IO) - pointer to location within message buffer */ |
| /* */ |
| /* Decode the IP address / port at p and record them in xu. */ |
| /* -------------------------------------------------------------------- */ |
| static int |
| ippr_rpcb_getuaddr(rm, xu, p) |
| rpc_msg_t *rm; |
| xdr_uaddr_t *xu; |
| u_32_t **p; |
| { |
| char *c, *i, *b, *pp; |
| u_int d, dd, l, t; |
| char uastr[24]; |
| |
| /* Test for string length. */ |
| if (!RPCB_BUF_GEQ(rm, *p, 4)) |
| return(-1); |
| |
| xu->xu_xslen = (*p)++; |
| xu->xu_xsstr = (char *)*p; |
| |
| /* Length check */ |
| l = B(xu->xu_xslen); |
| if (l < 11 || l > 23 || !RPCB_BUF_GEQ(rm, *p, XDRALIGN(l))) |
| return(-1); |
| |
| /* Advance p */ |
| *(char **)p += XDRALIGN(l); |
| |
| /* Copy string to local buffer & terminate C style */ |
| bcopy(xu->xu_xsstr, uastr, l); |
| uastr[l] = '\0'; |
| |
| i = (char *)&xu->xu_ip; |
| pp = (char *)&xu->xu_port; |
| |
| /* |
| * Expected format: a.b.c.d.e.f where [a-d] correspond to bytes of |
| * an IP address and [ef] are the bytes of a L4 port. |
| */ |
| if (!(ISDIGIT(uastr[0]) && ISDIGIT(uastr[l-1]))) |
| return(-1); |
| b = uastr; |
| for (c = &uastr[1], d = 0, dd = 0; c < &uastr[l-1]; c++) { |
| if (ISDIGIT(*c)) { |
| dd = 0; |
| continue; |
| } |
| if (*c == '.') { |
| if (dd != 0) |
| return(-1); |
| |
| /* Check for ASCII byte. */ |
| *c = '\0'; |
| t = ippr_rpcb_atoi(b); |
| if (t > 255) |
| return(-1); |
| |
| /* Aim b at beginning of the next byte. */ |
| b = c + 1; |
| |
| /* Switch off IP addr vs port parsing. */ |
| if (d < 4) |
| i[d++] = t & 0xff; |
| else |
| pp[d++ - 4] = t & 0xff; |
| |
| dd = 1; |
| continue; |
| } |
| return(-1); |
| } |
| if (d != 5) /* String must contain exactly 5 periods. */ |
| return(-1); |
| |
| /* Handle the last byte (port low byte) */ |
| t = ippr_rpcb_atoi(b); |
| if (t > 255) |
| return(-1); |
| pp[d - 4] = t & 0xff; |
| |
| return(0); |
| } |
| |
| /* -------------------------------------------------------------------- */ |
| /* Function: ippr_rpcb_atoi (XXX should be generic for all proxies) */ |
| /* Returns: int -- integer representation of supplied string */ |
| /* Parameters: ptr(I) - input string */ |
| /* */ |
| /* Simple version of atoi(3) ripped from ip_rcmd_pxy.c. */ |
| /* -------------------------------------------------------------------- */ |
| static u_int |
| ippr_rpcb_atoi(ptr) |
| char *ptr; |
| { |
| register char *s = ptr, c; |
| register u_int i = 0; |
| |
| while (((c = *s++) != '\0') && ISDIGIT(c)) { |
| i *= 10; |
| i += c - '0'; |
| } |
| return i; |
| } |
| |
| /* -------------------------------------------------------------------- */ |
| /* Function: ippr_rpcb_modreq */ |
| /* Returns: int -- change in datagram length */ |
| /* APR_ERR(2) - critical failure */ |
| /* Parameters: fin(I) - pointer to packet information */ |
| /* nat(I) - pointer to NAT session */ |
| /* rm(I) - pointer to RPC message structure */ |
| /* m(I) - pointer to mbuf chain */ |
| /* off(I) - current offset within mbuf chain */ |
| /* */ |
| /* When external and internal addresses differ, we rewrite the former */ |
| /* with the latter. (This is exclusive to protocol versions 3 & 4). */ |
| /* -------------------------------------------------------------------- */ |
| static int |
| ippr_rpcb_modreq(fin, nat, rm, m, off) |
| fr_info_t *fin; |
| nat_t *nat; |
| rpc_msg_t *rm; |
| mb_t *m; |
| u_int off; |
| { |
| u_int len, xlen, pos, bogo; |
| rpcb_args_t *ra; |
| char uaddr[24]; |
| udphdr_t *udp; |
| char *i, *p; |
| int diff; |
| |
| ra = &rm->rm_call.rc_rpcbargs; |
| i = (char *)&nat->nat_inip.s_addr; |
| p = (char *)&nat->nat_inport; |
| |
| /* Form new string. */ |
| bzero(uaddr, sizeof(uaddr)); /* Just in case we need padding. */ |
| #if defined(SNPRINTF) && defined(_KERNEL) |
| SNPRINTF(uaddr, sizeof(uaddr), |
| #else |
| (void) sprintf(uaddr, |
| #endif |
| "%u.%u.%u.%u.%u.%u", i[0] & 0xff, i[1] & 0xff, |
| i[2] & 0xff, i[3] & 0xff, p[0] & 0xff, p[1] & 0xff); |
| len = strlen(uaddr); |
| xlen = XDRALIGN(len); |
| |
| /* Determine mbuf offset to start writing to. */ |
| pos = (char *)ra->ra_maddr.xu_xslen - rm->rm_msgbuf; |
| off += pos; |
| |
| /* Write new string length. */ |
| bogo = htonl(len); |
| COPYBACK(m, off, 4, (caddr_t)&bogo); |
| off += 4; |
| |
| /* Write new string. */ |
| COPYBACK(m, off, xlen, uaddr); |
| off += xlen; |
| |
| /* Write in zero r_owner. */ |
| bogo = 0; |
| COPYBACK(m, off, 4, (caddr_t)&bogo); |
| |
| /* Determine difference in data lengths. */ |
| diff = xlen - XDRALIGN(B(ra->ra_maddr.xu_xslen)); |
| |
| /* |
| * If our new string has a different length, make necessary |
| * adjustments. |
| */ |
| if (diff != 0) { |
| udp = fin->fin_dp; |
| udp->uh_ulen = htons(ntohs(udp->uh_ulen) + diff); |
| fin->fin_ip->ip_len += diff; |
| fin->fin_dlen += diff; |
| fin->fin_plen += diff; |
| /* XXX Storage lengths. */ |
| } |
| |
| return(diff); |
| } |
| |
| /* -------------------------------------------------------------------- */ |
| /* Function: ippr_rpcb_decoderep */ |
| /* Returns: int - -1 == bad request or critical failure, */ |
| /* 0 == valid, negative reply */ |
| /* 1 == vaddlid, positive reply; needs no changes */ |
| /* Parameters: fin(I) - pointer to packet information */ |
| /* nat(I) - pointer to NAT session structure */ |
| /* rs(I) - pointer to RPCB session structure */ |
| /* rm(I) - pointer to RPC message structure */ |
| /* rxp(O) - pointer to RPCB transaction structure */ |
| /* */ |
| /* Take a presumed RPCB reply, extract the XID, search for the original */ |
| /* request information, and determine whether the request was accepted */ |
| /* or rejected. With a valid accepted reply, go ahead and create NAT */ |
| /* and state entries, and finish up by rewriting the packet as */ |
| /* required. */ |
| /* */ |
| /* WARNING: It's the responsibility of the caller to make sure there */ |
| /* is enough room in rs_buf for the basic RPC message "preamble". */ |
| /* -------------------------------------------------------------------- */ |
| static int |
| ippr_rpcb_decoderep(fin, nat, rs, rm, rxp) |
| fr_info_t *fin; |
| nat_t *nat; |
| rpcb_session_t *rs; |
| rpc_msg_t *rm; |
| rpcb_xact_t **rxp; |
| { |
| rpcb_listp_t *rl; |
| rpcb_entry_t *re; |
| rpcb_xact_t *rx; |
| u_32_t xdr, *p; |
| rpc_resp_t *rr; |
| int rv, cnt; |
| |
| p = (u_32_t *)rm->rm_msgbuf; |
| |
| bzero((char *)&rx, sizeof(rx)); |
| rr = &rm->rm_resp; |
| |
| rm->rm_xid = p; |
| xdr = B(p++); /* Record this message's XID. */ |
| |
| /* Lookup XID */ |
| MUTEX_ENTER(&rs->rs_rxlock); |
| if ((rx = ippr_rpcb_lookup(rs, xdr)) == NULL) { |
| MUTEX_EXIT(&rs->rs_rxlock); |
| return(-1); |
| } |
| ++rx->rx_ref; /* per thread reference */ |
| MUTEX_EXIT(&rs->rs_rxlock); |
| |
| *rxp = rx; |
| |
| /* Test call vs reply */ |
| if (B(p++) != RPCB_REPLY) |
| return(-1); |
| |
| /* Test reply_stat */ |
| switch(B(p++)) |
| { |
| case RPCB_MSG_DENIED: |
| return(0); |
| case RPCB_MSG_ACCEPTED: |
| break; |
| default: |
| return(-1); |
| } |
| |
| /* Bypass RPC authentication stuff. */ |
| if (ippr_rpcb_skipauth(rm, &rr->rr_authverf, &p) != 0) |
| return(-1); |
| |
| /* Test accept status */ |
| if (!RPCB_BUF_GEQ(rm, p, 4)) |
| return(-1); |
| if (B(p++) != 0) |
| return(0); |
| |
| /* Parse out the expected reply */ |
| switch(rx->rx_type) |
| { |
| case RPCB_RES_PMAP: |
| /* There must be only one 4 byte argument. */ |
| if (!RPCB_BUF_EQ(rm, p, 4)) |
| return(-1); |
| |
| rr->rr_v2 = p; |
| xdr = B(rr->rr_v2); |
| |
| /* Reply w/ a 0 port indicates service isn't registered */ |
| if (xdr == 0) |
| return(0); |
| |
| /* Is the value sane? */ |
| if (xdr > 65535) |
| return(-1); |
| |
| /* Create NAT & state table entries. */ |
| if (ippr_rpcb_getnat(fin, nat, rx->rx_proto, (u_int)xdr) != 0) |
| return(-1); |
| break; |
| case RPCB_RES_STRING: |
| /* Expecting a XDR string; need 4 bytes for length */ |
| if (!RPCB_BUF_GEQ(rm, p, 4)) |
| return(-1); |
| |
| rr->rr_v3.xu_str.xs_len = p++; |
| rr->rr_v3.xu_str.xs_str = (char *)p; |
| |
| xdr = B(rr->rr_v3.xu_xslen); |
| |
| /* A null string indicates an unregistered service */ |
| if ((xdr == 0) && RPCB_BUF_EQ(rm, p, 0)) |
| return(0); |
| |
| /* Decode the target IP address / port. */ |
| if (ippr_rpcb_getuaddr(rm, &rr->rr_v3, &p) != 0) |
| return(-1); |
| |
| /* Validate the IP address and port contained. */ |
| if (nat->nat_inip.s_addr != rr->rr_v3.xu_ip) |
| return(-1); |
| |
| /* Create NAT & state table entries. */ |
| if (ippr_rpcb_getnat(fin, nat, rx->rx_proto, |
| (u_int)rr->rr_v3.xu_port) != 0) |
| return(-1); |
| break; |
| case RPCB_RES_LIST: |
| if (!RPCB_BUF_GEQ(rm, p, 4)) |
| return(-1); |
| /* rpcb_entry_list_ptr */ |
| switch(B(p)) |
| { |
| case 0: |
| return(0); |
| /*NOTREACHED*/ |
| break; |
| case 1: |
| break; |
| default: |
| return(-1); |
| } |
| rl = &rr->rr_v4; |
| rl->rl_list = p++; |
| cnt = 0; |
| |
| for(;;) { |
| re = &rl->rl_entries[rl->rl_cnt]; |
| if (ippr_rpcb_getuaddr(rm, &re->re_maddr, &p) != 0) |
| return(-1); |
| if (ippr_rpcb_getproto(rm, &re->re_netid, &p) != 0) |
| return(-1); |
| /* re_semantics & re_pfamily length */ |
| if (!RPCB_BUF_GEQ(rm, p, 12)) |
| return(-1); |
| p++; /* Skipping re_semantics. */ |
| xdr = B(p++); |
| if ((xdr != 4) || strncmp((char *)p, "inet", 4)) |
| return(-1); |
| p++; |
| if (ippr_rpcb_getproto(rm, &re->re_proto, &p) != 0) |
| return(-1); |
| if (!RPCB_BUF_GEQ(rm, p, 4)) |
| return(-1); |
| re->re_more = p; |
| if (B(re->re_more) > 1) /* 0,1 only legal values */ |
| return(-1); |
| ++rl->rl_cnt; |
| ++cnt; |
| if (B(re->re_more) == 0) |
| break; |
| /* Replies in max out at 2; TCP and/or UDP */ |
| if (cnt > 2) |
| return(-1); |
| p++; |
| } |
| |
| for(rl->rl_cnt = 0; rl->rl_cnt < cnt; rl->rl_cnt++) { |
| re = &rl->rl_entries[rl->rl_cnt]; |
| rv = ippr_rpcb_getnat(fin, nat, |
| re->re_proto.xp_proto, |
| (u_int)re->re_maddr.xu_port); |
| if (rv != 0) |
| return(-1); |
| } |
| break; |
| default: |
| /*CONSTANTCONDITION*/ |
| IPF_PANIC(1, ("illegal rx_type %d", rx->rx_type)); |
| } |
| |
| return(1); |
| } |
| |
| /* -------------------------------------------------------------------- */ |
| /* Function: ippr_rpcb_lookup */ |
| /* Returns: rpcb_xact_t * - NULL == no matching record, */ |
| /* else pointer to relevant entry */ |
| /* Parameters: rs(I) - pointer to RPCB session */ |
| /* xid(I) - XID to look for */ |
| /* -------------------------------------------------------------------- */ |
| static rpcb_xact_t * |
| ippr_rpcb_lookup(rs, xid) |
| rpcb_session_t *rs; |
| u_32_t xid; |
| { |
| rpcb_xact_t *rx; |
| |
| if (rs->rs_rxlist == NULL) |
| return(NULL); |
| |
| for (rx = rs->rs_rxlist; rx != NULL; rx = rx->rx_next) |
| if (rx->rx_xid == xid) |
| break; |
| |
| return(rx); |
| } |
| |
| /* -------------------------------------------------------------------- */ |
| /* Function: ippr_rpcb_deref */ |
| /* Returns: (void) */ |
| /* Parameters: rs(I) - pointer to RPCB session */ |
| /* rx(I) - pointer to RPC transaction struct to remove */ |
| /* force(I) - indicates to delete entry regardless of */ |
| /* reference count */ |
| /* Locking: rs->rs_rxlock must be held write only */ |
| /* */ |
| /* Free the RPCB transaction record rx from the chain of entries. */ |
| /* -------------------------------------------------------------------- */ |
| static void |
| ippr_rpcb_deref(rs, rx) |
| rpcb_session_t *rs; |
| rpcb_xact_t *rx; |
| { |
| rs = rs; /* LINT */ |
| |
| if (rx == NULL) |
| return; |
| |
| if (--rx->rx_ref != 0) |
| return; |
| |
| if (rx->rx_next != NULL) |
| rx->rx_next->rx_pnext = rx->rx_pnext; |
| |
| *rx->rx_pnext = rx->rx_next; |
| |
| KFREE(rx); |
| |
| --rpcbcnt; |
| } |
| |
| /* -------------------------------------------------------------------- */ |
| /* Function: ippr_rpcb_getproto */ |
| /* Returns: int - -1 == illegal protocol/netid, */ |
| /* 0 == legal protocol/netid */ |
| /* Parameters: rm(I) - pointer to RPC message structure */ |
| /* xp(I) - pointer to netid structure */ |
| /* p(IO) - pointer to location within packet buffer */ |
| /* */ |
| /* Decode netid/proto stored at p and record its numeric value. */ |
| /* -------------------------------------------------------------------- */ |
| static int |
| ippr_rpcb_getproto(rm, xp, p) |
| rpc_msg_t *rm; |
| xdr_proto_t *xp; |
| u_32_t **p; |
| { |
| u_int len; |
| |
| /* Must have 4 bytes for length & 4 bytes for "tcp" or "udp". */ |
| if (!RPCB_BUF_GEQ(rm, p, 8)) |
| return(-1); |
| |
| xp->xp_xslen = (*p)++; |
| xp->xp_xsstr = (char *)*p; |
| |
| /* Test the string length. */ |
| len = B(xp->xp_xslen); |
| if (len != 3) |
| return(-1); |
| |
| /* Test the actual string & record the protocol accordingly. */ |
| if (!strncmp((char *)xp->xp_xsstr, "tcp\0", 4)) |
| xp->xp_proto = IPPROTO_TCP; |
| else if (!strncmp((char *)xp->xp_xsstr, "udp\0", 4)) |
| xp->xp_proto = IPPROTO_UDP; |
| else { |
| return(-1); |
| } |
| |
| /* Advance past the string. */ |
| (*p)++; |
| |
| return(0); |
| } |
| |
| /* -------------------------------------------------------------------- */ |
| /* Function: ippr_rpcb_getnat */ |
| /* Returns: int -- -1 == failed to create table entries, */ |
| /* 0 == success */ |
| /* Parameters: fin(I) - pointer to packet information */ |
| /* nat(I) - pointer to NAT table entry */ |
| /* proto(I) - transport protocol for new entries */ |
| /* port(I) - new port to use w/ wildcard table entries */ |
| /* */ |
| /* Create state and NAT entries to handle an anticipated connection */ |
| /* attempt between RPC client and server. */ |
| /* -------------------------------------------------------------------- */ |
| static int |
| ippr_rpcb_getnat(fin, nat, proto, port) |
| fr_info_t *fin; |
| nat_t *nat; |
| u_int proto; |
| u_int port; |
| { |
| ipnat_t *ipn, ipnat; |
| tcphdr_t tcp; |
| ipstate_t *is; |
| fr_info_t fi; |
| nat_t *natl; |
| int nflags; |
| |
| ipn = nat->nat_ptr; |
| |
| /* Generate dummy fr_info */ |
| bcopy((char *)fin, (char *)&fi, sizeof(fi)); |
| fi.fin_out = 0; |
| fi.fin_src = fin->fin_dst; |
| fi.fin_dst = nat->nat_outip; |
| fi.fin_p = proto; |
| fi.fin_sport = 0; |
| fi.fin_dport = port & 0xffff; |
| fi.fin_flx |= FI_IGNORE; |
| |
| bzero((char *)&tcp, sizeof(tcp)); |
| tcp.th_dport = htons(port); |
| |
| if (proto == IPPROTO_TCP) { |
| tcp.th_win = htons(8192); |
| TCP_OFF_A(&tcp, sizeof(tcphdr_t) >> 2); |
| fi.fin_dlen = sizeof(tcphdr_t); |
| tcp.th_flags = TH_SYN; |
| nflags = NAT_TCP; |
| } else { |
| fi.fin_dlen = sizeof(udphdr_t); |
| nflags = NAT_UDP; |
| } |
| |
| nflags |= SI_W_SPORT|NAT_SEARCH; |
| fi.fin_dp = &tcp; |
| fi.fin_plen = fi.fin_hlen + fi.fin_dlen; |
| |
| /* |
| * Search for existing NAT & state entries. Pay close attention to |
| * mutexes / locks grabbed from lookup routines, as not doing so could |
| * lead to bad things. |
| * |
| * If successful, fr_stlookup returns with ipf_state locked. We have |
| * no use for this lock, so simply unlock it if necessary. |
| */ |
| is = fr_stlookup(&fi, &tcp, NULL); |
| if (is != NULL) { |
| RWLOCK_EXIT(&ipf_state); |
| } |
| |
| RWLOCK_EXIT(&ipf_nat); |
| |
| WRITE_ENTER(&ipf_nat); |
| natl = nat_inlookup(&fi, nflags, proto, fi.fin_src, fi.fin_dst); |
| |
| if ((natl != NULL) && (is != NULL)) { |
| MUTEX_DOWNGRADE(&ipf_nat); |
| return(0); |
| } |
| |
| /* Slightly modify the following structures for actual use in creating |
| * NAT and/or state entries. We're primarily concerned with stripping |
| * flags that may be detrimental to the creation process or simply |
| * shouldn't be associated with a table entry. |
| */ |
| fi.fin_fr = &rpcbfr; |
| fi.fin_flx &= ~FI_IGNORE; |
| nflags &= ~NAT_SEARCH; |
| |
| if (natl == NULL) { |
| /* XXX Since we're just copying the original ipn contents |
| * back, would we be better off just sending a pointer to |
| * the 'temp' copy off to nat_new instead? |
| */ |
| /* Generate template/bogus NAT rule. */ |
| bcopy((char *)ipn, (char *)&ipnat, sizeof(ipnat)); |
| ipn->in_flags = nflags & IPN_TCPUDP; |
| ipn->in_apr = NULL; |
| ipn->in_p = proto; |
| ipn->in_pmin = htons(fi.fin_dport); |
| ipn->in_pmax = htons(fi.fin_dport); |
| ipn->in_pnext = htons(fi.fin_dport); |
| ipn->in_space = 1; |
| ipn->in_ippip = 1; |
| if (ipn->in_flags & IPN_FILTER) { |
| ipn->in_scmp = 0; |
| ipn->in_dcmp = 0; |
| } |
| *ipn->in_plabel = '\0'; |
| |
| /* Create NAT entry. return NULL if this fails. */ |
| MUTEX_ENTER(&ipf_nat_new); |
| natl = nat_new(&fi, ipn, NULL, nflags|SI_CLONE|NAT_SLAVE, |
| NAT_INBOUND); |
| MUTEX_EXIT(&ipf_nat_new); |
| |
| bcopy((char *)&ipnat, (char *)ipn, sizeof(ipnat)); |
| |
| if (natl == NULL) { |
| MUTEX_DOWNGRADE(&ipf_nat); |
| return(-1); |
| } |
| |
| ipn->in_use++; |
| (void) nat_proto(&fi, natl, nflags); |
| MUTEX_ENTER(&natl->nat_lock); |
| nat_update(&fi, natl); |
| MUTEX_EXIT(&natl->nat_lock); |
| } |
| MUTEX_DOWNGRADE(&ipf_nat); |
| |
| if (is == NULL) { |
| /* Create state entry. Return NULL if this fails. */ |
| fi.fin_dst = nat->nat_inip; |
| fi.fin_flx |= FI_NATED; |
| fi.fin_flx &= ~FI_STATE; |
| nflags &= NAT_TCPUDP; |
| nflags |= SI_W_SPORT|SI_CLONE; |
| |
| is = fr_addstate(&fi, NULL, nflags); |
| if (is == NULL) { |
| /* |
| * XXX nat_delete is private to ip_nat.c. Should |
| * check w/ Darren about this one. |
| * |
| * nat_delete(natl, NL_EXPIRE); |
| */ |
| return(-1); |
| } |
| } |
| |
| return(0); |
| } |
| |
| /* -------------------------------------------------------------------- */ |
| /* Function: ippr_rpcb_modv3 */ |
| /* Returns: int -- change in packet length */ |
| /* Parameters: fin(I) - pointer to packet information */ |
| /* nat(I) - pointer to NAT session */ |
| /* rm(I) - pointer to RPC message structure */ |
| /* m(I) - pointer to mbuf chain */ |
| /* off(I) - offset within mbuf chain */ |
| /* */ |
| /* Write a new universal address string to this packet, adjusting */ |
| /* lengths as necessary. */ |
| /* -------------------------------------------------------------------- */ |
| static int |
| ippr_rpcb_modv3(fin, nat, rm, m, off) |
| fr_info_t *fin; |
| nat_t *nat; |
| rpc_msg_t *rm; |
| mb_t *m; |
| u_int off; |
| { |
| u_int len, xlen, pos, bogo; |
| rpc_resp_t *rr; |
| char uaddr[24]; |
| char *i, *p; |
| int diff; |
| |
| rr = &rm->rm_resp; |
| i = (char *)&nat->nat_outip.s_addr; |
| p = (char *)&rr->rr_v3.xu_port; |
| |
| /* Form new string. */ |
| bzero(uaddr, sizeof(uaddr)); /* Just in case we need padding. */ |
| #if defined(SNPRINTF) && defined(_KERNEL) |
| SNPRINTF(uaddr, sizeof(uaddr), |
| #else |
| (void) sprintf(uaddr, |
| #endif |
| "%u.%u.%u.%u.%u.%u", i[0] & 0xff, i[1] & 0xff, |
| i[2] & 0xff, i[3] & 0xff, p[0] & 0xff, p[1] & 0xff); |
| len = strlen(uaddr); |
| xlen = XDRALIGN(len); |
| |
| /* Determine mbuf offset to write to. */ |
| pos = (char *)rr->rr_v3.xu_xslen - rm->rm_msgbuf; |
| off += pos; |
| |
| /* Write new string length. */ |
| bogo = htonl(len); |
| COPYBACK(m, off, 4, (caddr_t)&bogo); |
| off += 4; |
| |
| /* Write new string. */ |
| COPYBACK(m, off, xlen, uaddr); |
| |
| /* Determine difference in data lengths. */ |
| diff = xlen - XDRALIGN(B(rr->rr_v3.xu_xslen)); |
| |
| /* |
| * If our new string has a different length, make necessary |
| * adjustments. |
| */ |
| if (diff != 0) |
| ippr_rpcb_fixlen(fin, diff); |
| |
| return(diff); |
| } |
| |
| /* -------------------------------------------------------------------- */ |
| /* Function: ippr_rpcb_modv4 */ |
| /* Returns: int -- change in packet length */ |
| /* Parameters: fin(I) - pointer to packet information */ |
| /* nat(I) - pointer to NAT session */ |
| /* rm(I) - pointer to RPC message structure */ |
| /* m(I) - pointer to mbuf chain */ |
| /* off(I) - offset within mbuf chain */ |
| /* */ |
| /* Write new rpcb_entry list, adjusting lengths as necessary. */ |
| /* -------------------------------------------------------------------- */ |
| static int |
| ippr_rpcb_modv4(fin, nat, rm, m, off) |
| fr_info_t *fin; |
| nat_t *nat; |
| rpc_msg_t *rm; |
| mb_t *m; |
| u_int off; |
| { |
| u_int len, xlen, pos, bogo; |
| rpcb_listp_t *rl; |
| rpcb_entry_t *re; |
| rpc_resp_t *rr; |
| char uaddr[24]; |
| int diff, cnt; |
| char *i, *p; |
| |
| diff = 0; |
| rr = &rm->rm_resp; |
| rl = &rr->rr_v4; |
| |
| i = (char *)&nat->nat_outip.s_addr; |
| |
| /* Determine mbuf offset to write to. */ |
| re = &rl->rl_entries[0]; |
| pos = (char *)re->re_maddr.xu_xslen - rm->rm_msgbuf; |
| off += pos; |
| |
| for (cnt = 0; cnt < rl->rl_cnt; cnt++) { |
| re = &rl->rl_entries[cnt]; |
| p = (char *)&re->re_maddr.xu_port; |
| |
| /* Form new string. */ |
| bzero(uaddr, sizeof(uaddr)); /* Just in case we need |
| padding. */ |
| #if defined(SNPRINTF) && defined(_KERNEL) |
| SNPRINTF(uaddr, sizeof(uaddr), |
| #else |
| (void) sprintf(uaddr, |
| #endif |
| "%u.%u.%u.%u.%u.%u", i[0] & 0xff, |
| i[1] & 0xff, i[2] & 0xff, i[3] & 0xff, |
| p[0] & 0xff, p[1] & 0xff); |
| len = strlen(uaddr); |
| xlen = XDRALIGN(len); |
| |
| /* Write new string length. */ |
| bogo = htonl(len); |
| COPYBACK(m, off, 4, (caddr_t)&bogo); |
| off += 4; |
| |
| /* Write new string. */ |
| COPYBACK(m, off, xlen, uaddr); |
| off += xlen; |
| |
| /* Record any change in length. */ |
| diff += xlen - XDRALIGN(B(re->re_maddr.xu_xslen)); |
| |
| /* If the length changed, copy back the rest of this entry. */ |
| len = ((char *)re->re_more + 4) - |
| (char *)re->re_netid.xp_xslen; |
| if (diff != 0) { |
| COPYBACK(m, off, len, (caddr_t)re->re_netid.xp_xslen); |
| } |
| off += len; |
| } |
| |
| /* |
| * If our new string has a different length, make necessary |
| * adjustments. |
| */ |
| if (diff != 0) |
| ippr_rpcb_fixlen(fin, diff); |
| |
| return(diff); |
| } |
| |
| |
| /* -------------------------------------------------------------------- */ |
| /* Function: ippr_rpcb_fixlen */ |
| /* Returns: (void) */ |
| /* Parameters: fin(I) - pointer to packet information */ |
| /* len(I) - change in packet length */ |
| /* */ |
| /* Adjust various packet related lengths held in structure and packet */ |
| /* header fields. */ |
| /* -------------------------------------------------------------------- */ |
| static void |
| ippr_rpcb_fixlen(fin, len) |
| fr_info_t *fin; |
| int len; |
| { |
| udphdr_t *udp; |
| |
| udp = fin->fin_dp; |
| udp->uh_ulen = htons(ntohs(udp->uh_ulen) + len); |
| fin->fin_ip->ip_len += len; |
| fin->fin_dlen += len; |
| fin->fin_plen += len; |
| } |
| |
| #undef B |