| |
| Installing IPFilter into OpenBSD 3.0 Kernel |
| =========================================== |
| The installation of IPFilter should be as easy as following the steps |
| below. In cases where "i386" is mentioned, if you are working on a |
| different platform, substitute that name there and it should work equally |
| as well. The patches include enabling IPFilter for IPv4 filtering, IPv6 |
| filtering and bridge filtering. |
| |
| The commands given below are intended as guides rather than exact matches |
| on what needs to be typed. In many cases, paths to files or directories |
| may bear little resemblence to what is presented below. |
| |
| You may encounter difficulties with step 7 if you have made changes to the |
| rc files which cause "patch" to not be able to work out how to apply the |
| changes correctly. |
| |
| If the below steps are followed with no problems then it should be safe to |
| perform step 8 and reboot with the new kernel. Of course if you are not |
| using GENERIC then substitute GENERIC for your kernel name. If your kernel |
| config file includes the "GENERIC" one then you will not need to add explicit |
| options for IPFilter. |
| |
| 1. Extract your source tree into /usr/src, creating /usr/src/sys. |
| |
| cd /usr/src |
| gunzip -c sys.tar.gz | tar xpf - |
| |
| 2. Unpack IPFilter and apply the patches to the kernel source |
| |
| cd ~ |
| gunzip -c ip_fil4next.tar.gz | tar xpf - |
| cd /usr/src |
| patch < ~/ip_fil4next/OpenBSD-3/3.0-sys-diffs |
| |
| 3. Add IPFilter to the source code tree: |
| |
| cd ~/ip_fil4next |
| BSD/kupgrade |
| |
| 4. Build a new OpenBSD kernel |
| |
| /bin/rm -rf /sys/arch/i386/compile/GENERIC |
| cd /sys/arch/i386/conf |
| config GENERIC |
| cd ../compile/GENERIC |
| make depend && make |
| cp bsd /bsd |
| |
| 5. Build and install IPFilter |
| |
| cd ip_fil4next |
| make openbsd |
| make install-bsd |
| OpenBSD-3/makedevs-3.0 |
| |
| 6. Patch rc scripts in /etc |
| |
| cd /etc |
| patch < ~/ip_fil4next/OpenBSD-3/3.0-rc-diffs |
| |
| 7. Reboot |
| |
| |
| IPFilter device files |
| ===================== |
| Patches to include making IPFilter devices can be found in the file |
| 3.0-MAKEDEV-diffs. These diffs are generally only of interested if |
| you are going to be building a distribution for others and want the |
| correct MAKEDEV scripts to be built. You may also wish to use this |
| to patch /dev/MAKEDEV on your machine to be correct. Pre-fab'd MAKEDEV |
| scripts (or individual patches) for each architecture are not provided. |
| You will need to have extracted "./etc" from src.tar.gz to use these |
| patches. |
| |