hwloc-1.2.1/config/distscript.csh - htop - Rivoreo Source Code Repositories

 #! /bin/csh -f
 #
 # Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
 #                         University Research and Technology
 #                         Corporation.  All rights reserved.
 # Copyright (c) 2004-2005 The University of Tennessee and The University
 #                         of Tennessee Research Foundation.  All rights
 #                         reserved.
 # Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
 #                         University of Stuttgart.  All rights reserved.
 # Copyright (c) 2004-2005 The Regents of the University of California.
 #                         All rights reserved.
 # Copyright © 2010 INRIA.  All rights reserved.
 # Copyright © 2009-2011 Cisco Systems, Inc.  All rights reserved.
 # $COPYRIGHT$
 #
 # Additional copyrights may follow
 #
 # $HEADER$
 #

 set builddir="`pwd`"

 set srcdir="$1"
 cd "$srcdir"
 set srcdir=`pwd`
 cd "$builddir"

 set distdir="$builddir/$2"
 set HWLOC_VERSION="$3"
 set HWLOC_REPO_REV="$4"

 if ("$distdir" == "") then
     echo "Must supply relative distdir as argv[2] -- aborting"
     exit 1
 elif ("$HWLOC_VERSION" == "") then
     echo "Must supply version as argv[1] -- aborting"
     exit 1
 endif

 #========================================================================

 if ("$srcdir" != "$builddir") then
     set vpath=1
     set vpath_msg=yes
 else
     set vpath=0
     set vpath_msg=no
 endif

 # We can catch some hard (but possible) to do mistakes by looking at
 # our tree's revision number, but only if we are in the source tree.
 # Otherwise, use what configure told us, at the cost of allowing one
 # or two corner cases in (but otherwise VPATH builds won't work).
 set repo_rev=$HWLOC_REPO_REV
 if (-d .svn) then
     set repo_rev="r`svnversion .`"
 endif

 set start=`date`
 cat <<EOF

 Creating hwloc distribution
 In directory: `pwd`
 Srcdir: $srcdir
 Builddir: $builddir
 VPATH: $vpath_msg
 Version: $HWLOC_VERSION
 Started: $start

 EOF

 umask 022

 if (! -d "$distdir") then
     echo "*** ERROR: dist dir does not exist"
     echo "*** ERROR:   $distdir"
     exit 1
 endif

 #
 # See if we need to update the version file with the current repo
 # revision number.  Do this *before* entering the distribution tree to
 # solve a whole host of problems with VPATH (since srcdir may be
 # relative or absolute)
 #
 set cur_repo_rev="`grep '^repo_rev' ${distdir}/VERSION | cut -d= -f2`"
 if ("$cur_repo_rev" == "-1") then
     sed -e 's/^repo_rev=.*/repo_rev='$repo_rev'/' "${distdir}/VERSION" > "${distdir}/version.new"
     cp "${distdir}/version.new" "${distdir}/VERSION"
     rm -f "${distdir}/version.new"
     # need to reset the timestamp to not annoy AM dependencies
     touch -r "${srcdir}/VERSION" "${distdir}/VERSION"
     echo "*** Updated VERSION file with repo rev number: $repo_rev"
 else
     echo "*** Did NOT update VERSION file with repo rev number"
 endif

 #
 # VPATH builds only work if the srcdir has valid docs already built.
 # If we're VPATH and the srcdir doesn't have valid docs, then fail.
 #

 if ($vpath == 1 && ! -d $srcdir/doc/doxygen-doc) then
     echo "*** This is a VPATH 'make dist', but the srcdir does not already"
     echo "*** have a doxygen-doc tree built.  hwloc's config/distscript.csh"
     echo "*** requores the docs to be built in the srcdir before executing"
     echo "*** 'make dist' in a VPATH build."
     exit 1
 endif

 #
 # If we're not VPATH, force the generation of new doxygen documentation
 #

 if ($vpath == 0) then
     # Not VPATH
     echo "*** Making new doxygen documentation (doxygen-doc tree)"
     echo "*** Directory: srcdir: $srcdir, distdir: $distdir, pwd: `pwd`"
     cd doc
     # We're still in the src tree, so kill any previous doxygen-docs
     # tree and make a new one.
     chmod -R a=rwx doxygen-doc
     rm -rf doxygen-doc
     make
     if ($status != 0) then
         echo ERROR: generating doxygen docs failed
         echo ERROR: cannot continue
         exit 1
     endif

     # Make new README file
     echo "*** Making new README"
     make readme
     if ($status != 0) then
         echo ERROR: generating new README failed
         echo ERROR: cannot continue
         exit 1
     endif
 else
     echo "*** This is a VPATH build; assuming that the doxygen docs and REAME"
     echo "*** are current in the srcdir (i.e., we'll just copy those)"
 endif

 echo "*** Copying doxygen-doc tree to dist..."
 echo "*** Directory: srcdir: $srcdir, distdir: $distdir, pwd: `pwd`"
 chmod -R a=rwx $distdir/doc/doxygen-doc
 echo rm -rf $distdir/doc/doxygen-doc
 rm -rf $distdir/doc/doxygen-doc
 echo cp -rpf $srcdir/doc/doxygen-doc $distdir/doc
 cp -rpf $srcdir/doc/doxygen-doc $distdir/doc

 echo "*** Copying new README"
 ls -lf $distdir/README
 cp -pf $srcdir/README $distdir

 #########################################################
 # VERY IMPORTANT: Now go into the new distribution tree #
 #########################################################
 cd "$distdir"
 echo "*** Now in distdir: $distdir"

 #
 # Remove all the latex source files from the distribution tree (the
 # PDFs are still there; we're just removing the latex source because
 # some of the filenames get really, really long...).
 #

 echo "*** Removing latex source from dist tree"
 rm -rf doc/doxygen-doc/latex

 #
 # Get the latest config.guess and config.sub from ftp.gnu.org
 #

 echo "*** Downloading latest config.sub/config.guess from ftp.gnu.org..."
 cd config
 set configdir="`pwd`"
 mkdir tmp.$$
 cd tmp.$$
 # Official HTTP git mirrors for config.guess / config.sub
 wget -t 1 -T 10 -O config.guess 'http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=master'
 wget -t 1 -T 10 -O config.sub 'http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=master'
 chmod +x config.guess config.sub

 # Recently, ftp.gnu.org has had zero-legnth config.guess / config.sub
 # files, which causes the automated nightly SVN snapshot tarball to
 # fail to be made correctly.  This is a primitive attempt to fix that.
 # If we got zero-length files from wget, use a config.guess /
 # config.sub from a known location that is more recent than what ships
 # in the current generation of auto* tools.  Also check to ensure that
 # the resulting scripts are runnable (Jan 2009: there are un-runnable
 # scripts available right now because of some git vulnerability).

 # Before you complain about this too loudly, remember that we're using
 # unreleased software...

 set happy=0
 if (! -f config.guess || ! -s config.guess) then
     echo " - WARNING: Got bad config.guess from ftp.gnu.org (non-existent or empty)"
 else
     ./config.guess >& /dev/null
     if ($status != 0) then
         echo " - WARNING: Got bad config.guess from ftp.gnu.org (not executable)"
     else
         if (! -f config.sub || ! -s config.sub) then
             echo " - WARNING: Got bad config.sub from ftp.gnu.org (non-existent or empty)"
         else
             ./config.sub `./config.guess` >& /dev/null
             if ($status != 0) then
                 echo " - WARNING: Got bad config.sub from ftp.gnu.org (not executable)"
             else
                 echo " - Got good config.guess and config.sub from ftp.gnu.org"
                 chmod +w ../config.sub ../config.guess
                 cp config.sub config.guess ..
                 set happy=1
             endif
         endif
     endif
 endif

 if ("$happy" == "0") then
     echo " - WARNING: using included versions for both config.sub and config.guess"
 endif
 cd ..
 rm -rf tmp.$$
 cd ..

 #
 # All done
 #

 cat <<EOF
 *** hwloc version $HWLOC_VERSION distribution created

 Started: $start
 Ended:   `date`

 EOF
	#! /bin/csh -f
	#
	# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
	# University Research and Technology
	# Corporation. All rights reserved.
	# Copyright (c) 2004-2005 The University of Tennessee and The University
	# of Tennessee Research Foundation. All rights
	# reserved.
	# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
	# University of Stuttgart. All rights reserved.
	# Copyright (c) 2004-2005 The Regents of the University of California.
	# All rights reserved.
	# Copyright © 2010 INRIA. All rights reserved.
	# Copyright © 2009-2011 Cisco Systems, Inc. All rights reserved.
	# $COPYRIGHT$
	#
	# Additional copyrights may follow
	#
	# $HEADER$
	#

	set builddir="`pwd`"

	set srcdir="$1"
	cd "$srcdir"
	set srcdir=`pwd`
	cd "$builddir"

	set distdir="$builddir/$2"
	set HWLOC_VERSION="$3"
	set HWLOC_REPO_REV="$4"

	if ("$distdir" == "") then
	echo "Must supply relative distdir as argv[2] -- aborting"
	exit 1
	elif ("$HWLOC_VERSION" == "") then
	echo "Must supply version as argv[1] -- aborting"
	exit 1
	endif

	#========================================================================

	if ("$srcdir" != "$builddir") then
	set vpath=1
	set vpath_msg=yes
	else
	set vpath=0
	set vpath_msg=no
	endif

	# We can catch some hard (but possible) to do mistakes by looking at
	# our tree's revision number, but only if we are in the source tree.
	# Otherwise, use what configure told us, at the cost of allowing one
	# or two corner cases in (but otherwise VPATH builds won't work).
	set repo_rev=$HWLOC_REPO_REV
	if (-d .svn) then
	set repo_rev="r`svnversion .`"
	endif

	set start=`date`
	cat <<EOF

	Creating hwloc distribution
	In directory: `pwd`
	Srcdir: $srcdir
	Builddir: $builddir
	VPATH: $vpath_msg
	Version: $HWLOC_VERSION
	Started: $start

	EOF

	umask 022

	if (! -d "$distdir") then
	echo "*** ERROR: dist dir does not exist"
	echo "*** ERROR: $distdir"
	exit 1
	endif

	#
	# See if we need to update the version file with the current repo
	# revision number. Do this before entering the distribution tree to
	# solve a whole host of problems with VPATH (since srcdir may be
	# relative or absolute)
	#
	set cur_repo_rev="`grep '^repo_rev' ${distdir}/VERSION \| cut -d= -f2`"
	if ("$cur_repo_rev" == "-1") then
	sed -e 's/^repo_rev=.*/repo_rev='$repo_rev'/' "${distdir}/VERSION" > "${distdir}/version.new"
	cp "${distdir}/version.new" "${distdir}/VERSION"
	rm -f "${distdir}/version.new"
	# need to reset the timestamp to not annoy AM dependencies
	touch -r "${srcdir}/VERSION" "${distdir}/VERSION"
	echo "*** Updated VERSION file with repo rev number: $repo_rev"
	else
	echo "*** Did NOT update VERSION file with repo rev number"
	endif

	#
	# VPATH builds only work if the srcdir has valid docs already built.
	# If we're VPATH and the srcdir doesn't have valid docs, then fail.
	#

	if ($vpath == 1 && ! -d $srcdir/doc/doxygen-doc) then
	echo "*** This is a VPATH 'make dist', but the srcdir does not already"
	echo "*** have a doxygen-doc tree built. hwloc's config/distscript.csh"
	echo "*** requores the docs to be built in the srcdir before executing"
	echo "*** 'make dist' in a VPATH build."
	exit 1
	endif

	#
	# If we're not VPATH, force the generation of new doxygen documentation
	#

	if ($vpath == 0) then
	# Not VPATH
	echo "*** Making new doxygen documentation (doxygen-doc tree)"
	echo "*** Directory: srcdir: $srcdir, distdir: $distdir, pwd: `pwd`"
	cd doc
	# We're still in the src tree, so kill any previous doxygen-docs
	# tree and make a new one.
	chmod -R a=rwx doxygen-doc
	rm -rf doxygen-doc
	make
	if ($status != 0) then
	echo ERROR: generating doxygen docs failed
	echo ERROR: cannot continue
	exit 1
	endif

	# Make new README file
	echo "*** Making new README"
	make readme
	if ($status != 0) then
	echo ERROR: generating new README failed
	echo ERROR: cannot continue
	exit 1
	endif
	else
	echo "*** This is a VPATH build; assuming that the doxygen docs and REAME"
	echo "*** are current in the srcdir (i.e., we'll just copy those)"
	endif

	echo "*** Copying doxygen-doc tree to dist..."
	echo "*** Directory: srcdir: $srcdir, distdir: $distdir, pwd: `pwd`"
	chmod -R a=rwx $distdir/doc/doxygen-doc
	echo rm -rf $distdir/doc/doxygen-doc
	rm -rf $distdir/doc/doxygen-doc
	echo cp -rpf $srcdir/doc/doxygen-doc $distdir/doc
	cp -rpf $srcdir/doc/doxygen-doc $distdir/doc

	echo "*** Copying new README"
	ls -lf $distdir/README
	cp -pf $srcdir/README $distdir

	#########################################################
	# VERY IMPORTANT: Now go into the new distribution tree #
	#########################################################
	cd "$distdir"
	echo "*** Now in distdir: $distdir"

	#
	# Remove all the latex source files from the distribution tree (the
	# PDFs are still there; we're just removing the latex source because
	# some of the filenames get really, really long...).
	#

	echo "*** Removing latex source from dist tree"
	rm -rf doc/doxygen-doc/latex

	#
	# Get the latest config.guess and config.sub from ftp.gnu.org
	#

	echo "*** Downloading latest config.sub/config.guess from ftp.gnu.org..."
	cd config
	set configdir="`pwd`"
	mkdir tmp.$$
	cd tmp.$$
	# Official HTTP git mirrors for config.guess / config.sub
	wget -t 1 -T 10 -O config.guess 'http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=master'
	wget -t 1 -T 10 -O config.sub 'http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=master'
	chmod +x config.guess config.sub

	# Recently, ftp.gnu.org has had zero-legnth config.guess / config.sub
	# files, which causes the automated nightly SVN snapshot tarball to
	# fail to be made correctly. This is a primitive attempt to fix that.
	# If we got zero-length files from wget, use a config.guess /
	# config.sub from a known location that is more recent than what ships
	# in the current generation of auto* tools. Also check to ensure that
	# the resulting scripts are runnable (Jan 2009: there are un-runnable
	# scripts available right now because of some git vulnerability).

	# Before you complain about this too loudly, remember that we're using
	# unreleased software...

	set happy=0
	if (! -f config.guess \|\| ! -s config.guess) then
	echo " - WARNING: Got bad config.guess from ftp.gnu.org (non-existent or empty)"
	else
	./config.guess >& /dev/null
	if ($status != 0) then
	echo " - WARNING: Got bad config.guess from ftp.gnu.org (not executable)"
	else
	if (! -f config.sub \|\| ! -s config.sub) then
	echo " - WARNING: Got bad config.sub from ftp.gnu.org (non-existent or empty)"
	else
	./config.sub `./config.guess` >& /dev/null
	if ($status != 0) then
	echo " - WARNING: Got bad config.sub from ftp.gnu.org (not executable)"
	else
	echo " - Got good config.guess and config.sub from ftp.gnu.org"
	chmod +w ../config.sub ../config.guess
	cp config.sub config.guess ..
	set happy=1
	endif
	endif
	endif
	endif

	if ("$happy" == "0") then
	echo " - WARNING: using included versions for both config.sub and config.guess"
	endif
	cd ..
	rm -rf tmp.$$
	cd ..

	#
	# All done
	#

	cat <<EOF
	*** hwloc version $HWLOC_VERSION distribution created

	Started: $start
	Ended: `date`

	EOF