| /* builtins.c - the GRUB builtin commands */ |
| /* |
| * GRUB -- GRand Unified Bootloader |
| * Copyright (C) 1999,2000,2001,2002,2003,2004 Free Software Foundation, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| /* Include stdio.h before shared.h, because we can't define |
| WITHOUT_LIBC_STUBS here. */ |
| #ifdef GRUB_UTIL |
| # include <stdio.h> |
| #endif |
| |
| #include <shared.h> |
| #include <filesys.h> |
| #include <term.h> |
| #include "iamath.h" |
| |
| #ifdef SUPPORT_NETBOOT |
| # define GRUB 1 |
| # include <etherboot.h> |
| #endif |
| |
| #ifdef SUPPORT_SERIAL |
| # include <serial.h> |
| # include <terminfo.h> |
| #endif |
| |
| #ifdef GRUB_UTIL |
| # include <device.h> |
| #else /* ! GRUB_UTIL */ |
| # include <apic.h> |
| //# include <smp-imps.h> |
| #endif /* ! GRUB_UTIL */ |
| |
| #ifdef USE_MD5_PASSWORDS |
| # include <md5.h> |
| #endif |
| |
| #include "freebsd.h" |
| |
| /* The type of kernel loaded. */ |
| kernel_t kernel_type; |
| static kernel_t kernel_type_orig; |
| |
| /* The boot device. */ |
| static int bootdev = 0; |
| |
| #ifdef GRUB_UTIL |
| /* 0 for silent, 1 for normal, 2..MAX_UINT for verbose. |
| * if debug == MAX_UINT or debug < 0, then filesystem debug mode is on. |
| * (MAX_UINT is 0x7FFFFFFF) |
| */ |
| int debug = 1; |
| |
| int use_config_file = 1; |
| unsigned long free_mem_start; |
| unsigned long free_mem_end; |
| #endif |
| |
| /* The default entry. */ |
| int default_entry = 0; |
| /* The fallback entry. */ |
| int fallback_entryno; |
| int fallback_entries[MAX_FALLBACK_ENTRIES]; |
| /* The number of current entry. */ |
| int current_entryno; |
| #ifdef SUPPORT_GFX |
| /* graphics file */ |
| char graphics_file[64]; |
| #endif |
| /* The address for Multiboot command-line buffer. */ |
| static char *mb_cmdline;// = (char *) MB_CMDLINE_BUF; |
| static char kernel_option_video[64] = {0};/* initialize the first byte to 0 */ |
| /* The password. */ |
| char *password; |
| /* The password type. */ |
| password_t password_type; |
| /* The flag for indicating that the user is authoritative. */ |
| int auth = 0; |
| /* The timeout. */ |
| int grub_timeout = -1; |
| /* Whether to show the menu or not. */ |
| int show_menu = 1; |
| /* Don't display a countdown message for the hidden menu */ |
| int silent_hiddenmenu = 0; |
| |
| unsigned long pxe_restart_config = 0; |
| #ifndef GRUB_UTIL |
| unsigned long configfile_in_menu_init = 0; |
| #endif /* ! GRUB_UTIL */ |
| |
| //extern unsigned long i; |
| //extern char *mbr; |
| #if !defined(STAGE1_5) && !defined(GRUB_UTIL) |
| /* The first sector of stage2 can be reused as a tmp buffer. |
| * Do NOT write more than 512 bytes to this buffer! |
| * The stage2-body, i.e., the pre_stage2, starts at 0x8200! |
| * Do NOT overwrite the pre_stage2 code at 0x8200! |
| */ |
| extern char *mbr /* = (char *)0x8000 */; /* 512-byte buffer for any use. */ |
| #else |
| extern char mbr[SECTOR_SIZE]; |
| #endif /* STAGE1_5 || GRUB_UTIL */ |
| |
| #ifndef STAGE1_5 |
| extern int dir (char *dirname); |
| #endif /* STAGE1_5 */ |
| |
| #ifdef SUPPORT_GRAPHICS |
| extern int outline; |
| #endif /* SUPPORT_GRAPHICS */ |
| |
| #ifndef GRUB_UTIL |
| |
| /* Whether the drive map hook is on. */ |
| //static int int13_on_hook = 0; |
| |
| //static int floppy_not_inserted[4] = {0, 0, 0, 0}; |
| |
| /* The BIOS drive map. */ |
| int drive_map_slot_empty (struct drive_map_slot item); |
| |
| /* backup of original BIOS floppy-count byte in 0x410 */ |
| extern char floppies_orig; |
| |
| /* backup of original BIOS harddrive-count byte in 0x475 */ |
| extern char harddrives_orig; |
| |
| extern unsigned short chain_load_segment;//0x0000; |
| extern unsigned short chain_load_offset;//0x7c00; |
| extern unsigned int chain_load_length;//0x200; |
| extern unsigned short chain_boot_CS;//0x0000; |
| extern unsigned short chain_boot_IP;//0x7c00; |
| extern unsigned long chain_ebx; |
| extern unsigned long chain_ebx_set; |
| extern unsigned long chain_edx; |
| extern unsigned long chain_edx_set; |
| extern unsigned long chain_enable_gateA20; |
| extern char HMA_start[]; |
| #endif /* ! GRUB_UTIL */ |
| |
| static int chainloader_load_segment = 0; |
| static int chainloader_load_segment_orig = 0; |
| static int chainloader_load_offset = 0; |
| static int chainloader_load_offset_orig = 0; |
| static int chainloader_load_length = 0; |
| static int chainloader_load_length_orig = 0; |
| static int chainloader_skip_length = 0; |
| static int chainloader_skip_length_orig = 0; |
| static int chainloader_boot_CS = 0; |
| static int chainloader_boot_CS_orig = 0; |
| static int chainloader_boot_IP = 0; |
| static int chainloader_boot_IP_orig = 0; |
| static long chainloader_ebx = 0; |
| static long chainloader_ebx_orig = 0; |
| static int chainloader_ebx_set = 0; |
| static int chainloader_ebx_set_orig = 0; |
| static long chainloader_edx = 0; |
| static long chainloader_edx_orig = 0; |
| static int chainloader_edx_set = 0; |
| static int chainloader_edx_set_orig = 0; |
| static int chainloader_disable_A20 = 0; |
| static int chainloader_disable_A20_orig = 0; |
| static int is_sdi = 0; |
| static int is_sdi_orig = 0; |
| static int is_raw = 0; |
| static int is_raw_orig = 0; |
| static int is_isolinux = 0; |
| static int is_isolinux_orig = 0; |
| static int is_grldr = 0; |
| static int is_grldr_orig = 0; |
| static int is_io = 0; |
| static int is_io_orig = 0; |
| static char chainloader_file[256]; |
| static char chainloader_file_orig[256]; |
| |
| |
| static const char *warning_defaultfile = "# WARNING: If you want to edit this file directly, do not remove any line"; |
| |
| #ifndef GRUB_UTIL |
| int |
| drive_map_slot_empty (struct drive_map_slot item) |
| { |
| unsigned long *array = (unsigned long *)&item; |
| |
| unsigned long n = sizeof (struct drive_map_slot) / sizeof (unsigned long); |
| |
| while (n) |
| { |
| if (*array) |
| return 0; |
| array++; |
| n--; |
| } |
| |
| return 1; |
| //if (*(unsigned long *)(&(item.from_drive))) return 0; |
| //if (item.start_sector) return 0; |
| //if (item.sector_count) return 0; |
| //return 1; |
| } |
| |
| static int |
| drive_map_slot_equal (struct drive_map_slot a, struct drive_map_slot b) |
| { |
| //return ! grub_memcmp ((void *)&(a.from_drive), (void *)&(b.from_drive), sizeof(struct drive_map_slot)); |
| return ! grub_memcmp ((void *)&a, (void *)&b, sizeof(struct drive_map_slot)); |
| //if (*(unsigned long *)(&(a.from_drive)) != *(unsigned long *)(&(b.from_drive))) return 0; |
| //if (a.start_sector != b.start_sector) return 0; |
| //if (a.sector_count != b.sector_count) return 0; |
| //return 1; |
| } |
| int map_func (char *arg, int flags); |
| int disable_map_info = 0; |
| #endif /* ! GRUB_UTIL */ |
| |
| /* Prototypes for allowing straightfoward calling of builtins functions |
| inside other functions. */ |
| static int configfile_func (char *arg, int flags); |
| void lba_to_chs (unsigned long lba, unsigned long *cl, unsigned long *ch, unsigned long *dh); |
| //static char *set_device (char *device); |
| //static int real_open_partition (int flags); |
| //static int open_partition (void); |
| int command_func (char *arg, int flags); |
| int commandline_func (char *arg, int flags); |
| int errnum_func (char *arg, int flags); |
| int checkrange_func (char *arg, int flags); |
| |
| /* Check a password for correctness. Returns 0 if password was |
| correct, and a value != 0 for error, similarly to strcmp. */ |
| int |
| check_password (char *entered, char* expected, password_t type) |
| { |
| switch (type) |
| { |
| case PASSWORD_PLAIN: |
| return strcmp (entered, expected); |
| |
| #ifdef USE_MD5_PASSWORDS |
| case PASSWORD_MD5: |
| return check_md5_password (entered, expected); |
| #endif |
| default: |
| /* unsupported password type: be secure */ |
| return 1; |
| } |
| } |
| |
| /* Print which sector is read when loading a file. */ |
| static void |
| disk_read_print_func (unsigned long sector, unsigned long offset, unsigned long length) |
| { |
| grub_printf ("[%d,%d,%d]", sector, offset, length); |
| } |
| |
| extern int rawread_ignore_memmove_overflow; /* defined in disk_io.c */ |
| long query_block_entries; |
| unsigned long map_start_sector; |
| static unsigned long map_num_sectors = 0; |
| |
| static unsigned long blklst_start_sector; |
| static unsigned long blklst_num_sectors; |
| static unsigned long blklst_num_entries; |
| static unsigned long blklst_last_length; |
| |
| static void disk_read_blocklist_func (unsigned long sector, unsigned long offset, unsigned long length); |
| |
| /* Collect contiguous blocks into one entry as many as possible, |
| and print the blocklist notation on the screen. */ |
| static void |
| disk_read_blocklist_func (unsigned long sector, unsigned long offset, unsigned long length) |
| { |
| if (blklst_num_sectors > 0) |
| { |
| if (blklst_start_sector + blklst_num_sectors == sector |
| && offset == 0 && blklst_last_length == buf_geom.sector_size) |
| { |
| blklst_num_sectors++; |
| blklst_last_length = length; |
| return; |
| } |
| else |
| { |
| if (query_block_entries >= 0) |
| { |
| if (blklst_last_length == buf_geom.sector_size) |
| grub_printf ("%s%ld+%d", (blklst_num_entries ? "," : ""), |
| (unsigned long long)(blklst_start_sector - part_start), blklst_num_sectors); |
| else if (blklst_num_sectors > 1) |
| grub_printf ("%s%ld+%d,%ld[0-%d]", (blklst_num_entries ? "," : ""), |
| (unsigned long long)(blklst_start_sector - part_start), (blklst_num_sectors-1), |
| (unsigned long long)(blklst_start_sector + blklst_num_sectors-1 - part_start), |
| blklst_last_length); |
| else |
| grub_printf ("%s%ld[0-%d]", (blklst_num_entries ? "," : ""), |
| (unsigned long long)(blklst_start_sector - part_start), blklst_last_length); |
| } |
| blklst_num_entries++; |
| blklst_num_sectors = 0; |
| } |
| } |
| |
| if (offset > 0) |
| { |
| if (query_block_entries >= 0) |
| grub_printf("%s%ld[%d-%d]", (blklst_num_entries ? "," : ""), |
| (unsigned long long)(sector - part_start), offset, (offset + length)); |
| blklst_num_entries++; |
| } |
| else |
| { |
| blklst_start_sector = sector; |
| blklst_num_sectors = 1; |
| blklst_last_length = length; |
| } |
| } |
| |
| /* blocklist */ |
| static int |
| blocklist_func (char *arg, int flags) |
| { |
| //#ifdef GRUB_UTIL |
| // char *dummy = (char *) RAW_ADDR (0x100000); |
| //#else |
| // char *dummy = (char *) RAW_ADDR (0x400000); |
| //#endif |
| char *dummy = NULL; |
| int err; |
| #ifndef NO_DECOMPRESSION |
| int no_decompression_bak = no_decompression; |
| #endif |
| |
| blklst_start_sector = 0; |
| blklst_num_sectors = 0; |
| blklst_num_entries = 0; |
| blklst_last_length = 0; |
| |
| map_start_sector = 0; |
| map_num_sectors = 0; |
| |
| /* Open the file. */ |
| if (! grub_open (arg)) |
| goto fail_open; |
| |
| #ifndef NO_DECOMPRESSION |
| if (compressed_file) |
| { |
| if (query_block_entries < 0) |
| { |
| /* compressed files are not considered contiguous. */ |
| query_block_entries = 3; |
| goto fail_read; |
| } |
| |
| grub_close (); |
| no_decompression = 1; |
| if (! grub_open (arg)) |
| goto fail_open; |
| } |
| #endif /* NO_DECOMPRESSION */ |
| |
| /* Print the device name. */ |
| if (query_block_entries >= 0) |
| { |
| grub_printf ("(%cd%d", ((current_drive & 0x80) ? 'h' : 'f'), (current_drive & ~0x80)); |
| |
| if ((current_partition & 0xFF0000) != 0xFF0000) |
| grub_printf (",%d", ((unsigned char)(current_partition >> 16))); |
| |
| if ((current_partition & 0x00FF00) != 0x00FF00) |
| grub_printf (",%c", ('a' + ((unsigned char)(current_partition >> 8)))); |
| |
| grub_printf (")"); |
| } |
| |
| rawread_ignore_memmove_overflow = 1; |
| /* Read in the whole file to DUMMY. */ |
| disk_read_hook = disk_read_blocklist_func; |
| err = grub_read ((unsigned long long)(unsigned int)dummy, (query_block_entries < 0 ? buf_geom.sector_size : -1ULL), 0xedde0d90); |
| disk_read_hook = 0; |
| rawread_ignore_memmove_overflow = 0; |
| if (! err) |
| goto fail_read; |
| |
| /* The last entry may not be printed yet. Don't check if it is a |
| * full sector, since it doesn't matter if we read too much. */ |
| if (blklst_num_sectors > 0) |
| { |
| if (query_block_entries >= 0) |
| grub_printf ("%s%ld+%d", (blklst_num_entries ? "," : ""), |
| (unsigned long long)(blklst_start_sector - part_start), blklst_num_sectors); |
| blklst_num_entries++; |
| } |
| |
| if (query_block_entries >= 0) |
| grub_putchar ('\n'); |
| #if 0 |
| if (num_entries > 1) |
| query_block_entries = num_entries; |
| else |
| { |
| query_block_entries = 1; |
| map_start_sector = start_sector; |
| map_num_sectors = num_sectors; |
| } |
| #endif |
| if (query_block_entries < 0) |
| { |
| map_start_sector = blklst_start_sector; |
| blklst_start_sector = 0; |
| blklst_num_sectors = 0; |
| blklst_num_entries = 0; |
| blklst_last_length = 0; |
| rawread_ignore_memmove_overflow = 1; |
| /* read in the last sector to DUMMY */ |
| filepos = filemax ? (filemax - 1) & (-(unsigned long long)buf_geom.sector_size) : filemax; |
| disk_read_hook = disk_read_blocklist_func; |
| err = grub_read ((unsigned long long)(unsigned int)dummy, -1ULL, 0xedde0d90); |
| disk_read_hook = 0; |
| rawread_ignore_memmove_overflow = 0; |
| if (! err) |
| goto fail_read; |
| map_num_sectors = blklst_start_sector - map_start_sector + 1; |
| query_block_entries = filemax ? |
| map_num_sectors - ((filemax - 1) >> log2_tmp (buf_geom.sector_size)/*>> SECTOR_BITS*/) : 2; |
| } |
| |
| fail_read: |
| |
| grub_close (); |
| |
| fail_open: |
| |
| #ifndef NO_DECOMPRESSION |
| no_decompression = no_decompression_bak; |
| #endif |
| |
| if (query_block_entries < 0) |
| query_block_entries = 0; |
| return ! errnum; |
| } |
| |
| static struct builtin builtin_blocklist = |
| { |
| "blocklist", |
| blocklist_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "blocklist FILE", |
| "Print the blocklist notation of the file FILE." |
| }; |
| |
| #if ! defined(GRUB_UTIL) && ! defined (STAGE1_5) |
| /* WinME support by bean. Thanks! */ |
| |
| // The following routines are used to decompress IO.SYS from WinME |
| |
| static int ibuf_pos; |
| static char *ibuf_ptr,*obuf_ptr; |
| static unsigned short ibuf_tab[16]; |
| |
| static void ibuf_init(char* buf); |
| static unsigned short ibuf_read(int nbits); |
| static int expand_block(int nsec); |
| static long expand_file(char* src,char* dst); |
| |
| static void ibuf_init(char* buf) |
| { |
| int i; |
| |
| ibuf_ptr=buf; |
| ibuf_pos=0; |
| |
| // ibuf_tab[i]=(1<<(i+1))-1 |
| ibuf_tab[0]=1; |
| for (i=1;i<16;i++) |
| ibuf_tab[i]=ibuf_tab[i-1]*2+1; |
| } |
| |
| static unsigned short ibuf_read(int nbits) |
| { |
| unsigned short res; |
| |
| res=(unsigned short)((*((unsigned long*)ibuf_ptr)>>ibuf_pos) & ibuf_tab[nbits-1]); |
| ibuf_pos+=nbits; |
| if (ibuf_pos>=8) |
| { |
| ibuf_ptr+=(ibuf_pos>>3); |
| ibuf_pos&=7; |
| } |
| return res; |
| } |
| |
| #define obuf_init(buf) obuf_ptr=buf |
| #define obuf_putc(ch) *(obuf_ptr++)=ch |
| #define obuf_copy(ofs,len) do { for (;len>0;obuf_ptr++,len--) *(obuf_ptr)=*(obuf_ptr-ofs); } while (0) |
| // Don't use memcpy, otherwise we could be screwed ! |
| |
| static int expand_block(int nsec) |
| { |
| while (nsec>0) |
| { |
| int cnt; |
| |
| cnt=0x200; |
| while (1) |
| { |
| int flg,ofs,bts,bse,del,len; |
| |
| flg=ibuf_read(2); |
| |
| if (flg==0) ofs=ibuf_read(6); else |
| if (flg==3) |
| { |
| if (ibuf_read(1)) |
| { |
| ofs=ibuf_read(12)+0x140; |
| if (ofs==0x113F) |
| break; |
| } |
| else |
| ofs=ibuf_read(8)+0x40; |
| } else |
| { |
| char ch; |
| |
| cnt--; |
| if (cnt<0) |
| { |
| grub_putstr("Data corrupted"); |
| return 1; |
| } |
| ch=ibuf_read(7); |
| if (flg & 1) |
| ch|=0x80; |
| obuf_putc(ch); |
| continue; |
| } |
| if (ofs==0) |
| { |
| grub_putstr("Data corrupted"); |
| return 1; |
| } |
| bse=2; |
| del=0; |
| for (bts=0;bts<9;bts++) |
| { |
| if (ibuf_read(1)) |
| break; |
| bse+=del+1; |
| del=del*2+1; |
| } |
| if (bts==9) |
| { |
| grub_putstr("Data corrupted"); |
| return 1; |
| } |
| len=(bts)?bse+ibuf_read(bts):bse; |
| if ((cnt=cnt-len)<0) |
| { |
| grub_putstr("Data corrupted"); |
| return 1; |
| } |
| obuf_copy(ofs,len); |
| } |
| nsec--; |
| if ((cnt) && (nsec)) |
| { |
| grub_putstr("Data corrupted"); |
| return 1; |
| } |
| } |
| return 0; |
| } |
| |
| static long expand_file(char* src,char* dst) |
| { |
| ibuf_init(src); |
| obuf_init(dst); |
| |
| if (ibuf_read(16)!=0x4D43) |
| { |
| grub_putstr("First CM signature not found"); |
| return -1; |
| } |
| while (1) |
| { |
| unsigned short flg,len; |
| |
| flg=ibuf_read(8); |
| len=ibuf_read(16); |
| if (len==0) |
| { |
| int n; |
| |
| n=(ibuf_ptr-src) & 0xF; |
| if ((n) || (ibuf_pos)) |
| { |
| ibuf_ptr+=16-n; |
| ibuf_pos=0; |
| } |
| if (ibuf_read(16)!=0x4D43) |
| { |
| grub_putstr("Second CM signature not found"); |
| return -1; |
| } |
| return obuf_ptr-dst; |
| } |
| if (flg==0) |
| { |
| memcpy(obuf_ptr,ibuf_ptr,len); |
| ibuf_ptr+=len; |
| obuf_ptr+=len; |
| } |
| else |
| { |
| char* save_ptr; |
| unsigned short sec; |
| |
| sec=(ibuf_read(16)+511)>>9; |
| save_ptr=ibuf_ptr; |
| if (ibuf_read(16)!=0x5344) |
| { |
| grub_putstr("0x5344 signature not found"); |
| return -1; |
| } |
| ibuf_read(16); |
| if (expand_block(sec)) |
| return -1; |
| ibuf_ptr=save_ptr+len; |
| ibuf_pos=0; |
| } |
| } |
| } |
| #endif /* ! defined(GRUB_UTIL) && ! defined (STAGE1_5) */ |
| |
| #ifndef GRUB_UTIL |
| /* boot */ |
| static int |
| boot_func (char *arg, int flags) |
| { |
| int old_cursor, old_errnum; |
| struct term_entry *prev_term = current_term; |
| |
| /* Clear the int15 handler if we can boot the kernel successfully. |
| This assumes that the boot code never fails only if KERNEL_TYPE is |
| not KERNEL_TYPE_NONE. Is this assumption is bad? */ |
| if (kernel_type != KERNEL_TYPE_NONE) |
| unset_int15_handler (); |
| |
| /* if our terminal needed initialization, we should shut it down |
| * before booting the kernel, but we want to save what it was so |
| * we can come back if needed */ |
| if (current_term->shutdown) |
| { |
| (*current_term->shutdown)(); |
| current_term = term_table; /* assumption: console is first */ |
| } |
| |
| #ifdef FSYS_PXE |
| if (kernel_type!=KERNEL_TYPE_CHAINLOADER) |
| pxe_unload(); |
| #endif |
| |
| #ifdef SUPPORT_NETBOOT |
| /* Shut down the networking. */ |
| cleanup_net (); |
| #endif |
| |
| old_cursor = setcursor (1); |
| errnum = 0; |
| |
| //errorcheck = 1; |
| /* clear keyboard buffer before boot */ |
| while (console_checkkey () != -1) console_getkey (); |
| |
| switch (kernel_type) |
| { |
| case KERNEL_TYPE_FREEBSD: |
| case KERNEL_TYPE_NETBSD: |
| /* *BSD */ |
| bsd_boot (kernel_type, /*0*/bootdev, (char *) mbi.cmdline); |
| break; |
| |
| case KERNEL_TYPE_LINUX: |
| /* Linux */ |
| map_func ("(0x22) (0x22)", flags); /* delete mapping for INITRD_DRIVE */ |
| map_func ("--rehook", flags); |
| linux_boot (); |
| break; |
| |
| case KERNEL_TYPE_BIG_LINUX: |
| /* Big Linux */ |
| |
| #ifdef FSYS_PXE |
| if (pxe_entry == 0) |
| { |
| unsigned int p; |
| /* check grub.exe */ |
| for (p = (unsigned int)linux_bzimage_tmp_addr; p < (unsigned int)linux_bzimage_tmp_addr + 0x8000; p += 0x200) |
| { |
| if (((*(long long *)(void *)p & 0xFFFF00FFFFFFFFFFLL) == 0x02030000008270EALL) && |
| ((*(long long *)(void *)(p + 0x12) & 0xFFFFFFFFFFLL) == 0x0037392E30LL)) |
| { |
| *(char *)(void *)(p + 5) |= 0x01; /* disable pxe */ |
| break; |
| } |
| } |
| } |
| #endif |
| |
| map_func ("(0x22) (0x22)", flags); /* delete mapping for INITRD_DRIVE */ |
| map_func ("--rehook", flags); |
| big_linux_boot (); |
| break; |
| |
| case KERNEL_TYPE_CHAINLOADER: |
| /* Chainloader */ |
| |
| /* set boot drive to the root device. |
| * the boot drive should be either (fd0) or (hd0) for normal |
| * MS-style boot sectors. the BIOS only passes (fd0) or (hd0) |
| * to DL, because these two are the only devices that can be |
| * booted by BIOS. |
| * |
| * You should set boot drive using the rootnoverify command just |
| * before the boot command. |
| */ |
| boot_drive = saved_drive; |
| |
| #ifndef GRUB_UTIL |
| /* extended chainloader */ |
| if (chainloader_load_length > 512 || chainloader_boot_CS > 0 || |
| chainloader_skip_length || |
| chainloader_ebx_set || |
| chainloader_edx_set || |
| is_sdi || is_raw || //chainloader_disable_A20 || |
| (chainloader_boot_IP >= 0 && chainloader_boot_IP != 0x7c00) || |
| (((chainloader_load_segment >= 0)? chainloader_load_segment : 0) << 4) + |
| ((chainloader_load_offset >= 0)? chainloader_load_offset : 0x7c00) != 0x7c00 |
| ) |
| { |
| unsigned long read_length; |
| |
| /* load high */ |
| if (chainloader_load_segment == -1) |
| chainloader_load_segment = 0; |
| if (chainloader_load_offset == -1) |
| { |
| if (chainloader_load_segment) |
| chainloader_load_offset = 0; |
| else |
| chainloader_load_offset = 0x7c00; |
| } |
| if (chainloader_boot_CS == -1) |
| chainloader_boot_CS = chainloader_load_segment; |
| if (chainloader_boot_IP == -1) |
| chainloader_boot_IP = chainloader_load_offset; |
| |
| /* Open the file. */ |
| if (! grub_open (chainloader_file)) |
| { |
| kernel_type = KERNEL_TYPE_NONE; |
| return 0; |
| } |
| if (is_sdi) |
| { |
| unsigned long long bytes_needed = filemax; |
| unsigned long long base = 0; |
| |
| if (mbi.flags & MB_INFO_MEM_MAP) |
| { |
| struct AddrRangeDesc *map = (struct AddrRangeDesc *) saved_mmap_addr; |
| unsigned long end_addr = saved_mmap_addr + saved_mmap_length; |
| |
| for (; end_addr > (unsigned long) map; map = (struct AddrRangeDesc *) (((int) map) + 4 + map->size)) |
| { |
| unsigned long long top_end; |
| |
| if (map->Type != MB_ARD_MEMORY) |
| continue; |
| top_end = map->BaseAddr + map->Length; |
| if (top_end > 0x100000000ULL) |
| top_end = 0x100000000ULL; |
| |
| #define MIN_EMU_BASE 0x200000ULL |
| if (map->Length >= bytes_needed |
| && (base = (top_end - bytes_needed) & 0xfffff000) >= MIN_EMU_BASE /* page align */ |
| && map->Length >= top_end - base) |
| break; /* success */ |
| base = 0; |
| } |
| } |
| else |
| grub_printf ("Address Map BIOS Interface is not activated.\n"); |
| |
| if (base < MIN_EMU_BASE) |
| { |
| grub_close (); |
| return ! (errnum = ERR_WONT_FIT); |
| } |
| |
| #undef MIN_EMU_BASE |
| //filepos = 0; |
| if (grub_read (base, -1ULL, 0xedde0d90) != filemax) |
| { |
| grub_close (); |
| if (errnum == ERR_NONE) |
| errnum = ERR_READ; |
| return 0; |
| } |
| grub_close (); |
| |
| unset_int13_handler (0); |
| |
| #define BootCodeOffsetLow (*(unsigned long *)((int)base + 0x10)) |
| #define BootCodeSizeLow (*(unsigned long *)((int)base + 0x18)) |
| read_length = BootCodeSizeLow; |
| if (read_length > 0x90000) |
| read_length = 0x90000; |
| grub_memmove((char *)0x200000, (char *)((unsigned int)base + BootCodeOffsetLow), read_length); |
| #undef BootCodeOffsetLow |
| #undef BootCodeSizeLow |
| if (! chainloader_edx_set) |
| { |
| chainloader_edx = (unsigned int)base | 0x41; |
| chainloader_edx_set = 1; |
| } |
| }else{ |
| /* Read the first 640K */ |
| read_length = filemax - chainloader_skip_length; |
| filepos = ((*(unsigned short *)0x413)<<10) - (chainloader_load_segment<<4) - chainloader_load_offset; |
| if (read_length > filepos) |
| read_length = filepos; |
| filepos = chainloader_skip_length; |
| |
| /* read the new loader to physical address 2MB, overwriting |
| * the backup area of DOS memory. |
| */ |
| |
| if (grub_read ((unsigned long long) 0x200000, read_length, 0xedde0d90) != read_length) |
| { |
| grub_close (); |
| kernel_type = KERNEL_TYPE_NONE; |
| |
| if (errnum == ERR_NONE) |
| errnum = ERR_EXEC_FORMAT; |
| |
| break; |
| } |
| grub_close (); |
| |
| #ifdef FSYS_PXE |
| pxe_unload(); |
| #endif |
| |
| /* WinMe support by bean. Thanks! */ |
| |
| // Not a very neat way to test WinME, works anyway |
| if ((*(unsigned short*)0x200000==0x4D43) && |
| // ((*(char*)0x110002==0) || (*(unsigned short*)0x110000==0x4D43)) && |
| (chainloader_skip_length==0x800)) |
| { |
| unsigned long len; |
| len=(unsigned long)expand_file((char*)0x200000,(char*)0x2A0000); |
| if (len==0xffffffff || len==0) |
| { |
| kernel_type = KERNEL_TYPE_NONE; |
| errnum = ERR_EXEC_FORMAT; |
| break; |
| } |
| grub_memmove((char*)0x200000,(char*)0x2A0000,len); |
| chainloader_load_length=read_length=len; |
| } |
| |
| /* create boot info table for isolinux */ |
| if (is_isolinux) |
| { |
| int p; |
| query_block_entries = -1; /* query block list only */ |
| blocklist_func (chainloader_file, flags); |
| if (errnum) |
| break; |
| if (query_block_entries != 1) |
| { |
| errnum = ERR_NON_CONTIGUOUS; |
| break; |
| } |
| *(unsigned long*)0x20000C = map_start_sector; |
| *(unsigned long*)0x200010 = chainloader_load_length; |
| |
| old_errnum = 0; /* init to calculate the checksum */ |
| *(unsigned long*)(0x200000 + chainloader_load_length) = 0; |
| |
| for (p = 0; p < (chainloader_load_length - 0x40 + 3) / 4; p++) |
| { |
| old_errnum += *(long *)(0x200040 + (p << 2)); |
| } |
| |
| *(unsigned long*)0x200014 = old_errnum; /* checksum */ |
| } |
| #ifdef FSYS_PXE |
| if (is_grldr && pxe_entry == 0) |
| { |
| *(unsigned char*)0x202005 |= 0x01; /* disable pxe */ |
| } |
| #endif |
| |
| /* Turn off A20 here if --disable-a20 was specified. |
| * Note: we won't have access to the odd megas of the memory |
| * when A20 is off. |
| */ |
| if (chainloader_disable_A20) |
| { |
| if (! gateA20 (0)) |
| { |
| /* to asure A20 is on when we return to grub. */ |
| gateA20 (1); /* turn on A20 in case it is off */ |
| errnum = ERR_DISABLE_A20; |
| break; |
| } |
| if (debug > 0) |
| grub_printf("\nGate A20 is turned off successfully.\n"); |
| } |
| |
| if (! chainloader_edx_set) |
| { |
| chainloader_edx_set = 1; |
| chainloader_edx = boot_drive; |
| } |
| if (chainloader_edx & 0x80) |
| { |
| if (! probe_bpb((struct master_and_dos_boot_sector *)0x200000)) |
| if (*((unsigned long *) (0x20001C)) == 0) |
| { |
| int err; |
| if ((err = probe_mbr ((struct master_and_dos_boot_sector *)0x200000, 0, ((chainloader_load_length + 511) >> 9), 0))) |
| { |
| if (debug > 0) |
| printf ("Partition table not recognized(chainloader_edx=0x%X, err=%d). ", chainloader_edx, err); |
| errnum = ERR_HD_VOL_START_0; |
| break; |
| } |
| } |
| } else { |
| /* clear number of hidden sectors for floppy */ |
| if (! probe_bpb((struct master_and_dos_boot_sector *)0x200000)) |
| if (*((unsigned long *) (0x20001C))) |
| *((unsigned long *) (0x20001C)) = 0; |
| } |
| |
| } |
| |
| if (chainloader_load_length == -1 || chainloader_load_length > read_length) |
| chainloader_load_length = read_length; |
| |
| chain_load_segment = (unsigned short)chainloader_load_segment; |
| chain_load_offset = (unsigned short)chainloader_load_offset; |
| chain_boot_CS = (unsigned short)chainloader_boot_CS; |
| chain_boot_IP = (unsigned short)chainloader_boot_IP; |
| chain_load_length = chainloader_load_length; |
| if (! chainloader_ebx_set) |
| { |
| chainloader_ebx_set = 1; |
| chainloader_ebx = boot_drive; |
| } |
| chain_ebx = chainloader_ebx; |
| chain_ebx_set = chainloader_ebx_set; |
| chain_edx = chainloader_edx; |
| chain_edx_set = chainloader_edx_set; |
| chain_enable_gateA20 = ! chainloader_disable_A20; |
| |
| /* Check if we should set the int13 handler. */ |
| if (unset_int13_handler (1) && ! drive_map_slot_empty (bios_drive_map[0])) |
| { |
| /* Set the handler. This is somewhat dangerous. */ |
| set_int13_handler (bios_drive_map); |
| buf_drive = -1; |
| buf_track = -1; |
| } |
| |
| /* move the code to a safe place at 0x2B0000 */ |
| grub_memmove((char *)HMA_ADDR, HMA_start, 0x200/*0xfff0*/); |
| |
| //typedef void (*HMA_FUNC)(void); |
| //((HMA_FUNC)0x100000)(); /* no return */ |
| |
| /* Jump to high memory area. This will move boot code at |
| * 0x200000 to the destination load-segment:load-offset; |
| * setup edx and ebx registers; switch to real mode; |
| * and jump to boot-cs:boot-ip. |
| */ |
| ((void (*)(void))HMA_ADDR)(); /* no return */ |
| break; |
| } |
| #endif |
| if (chainloader_disable_A20) |
| { |
| if (gateA20 (0)) |
| grub_printf("\nGate A20 is turned off successfully.\n"); |
| else { |
| /* to asure A20 is on when we return to grub. */ |
| gateA20 (1); /* turn on A20 in case it is off */ |
| errnum = ERR_DISABLE_A20; |
| break; |
| } |
| } |
| /* Check if we should set the int13 handler. */ |
| if (unset_int13_handler (1) && ! drive_map_slot_empty (bios_drive_map[0])) |
| { |
| /* Set the handler. This is somewhat dangerous. */ |
| set_int13_handler (bios_drive_map); |
| buf_drive = -1; |
| buf_track = -1; |
| } |
| |
| if ((boot_drive & 0x80) == 0) |
| { |
| /* clear number of hidden sectors for floppy */ |
| if (! probe_bpb((struct master_and_dos_boot_sector *)0x7C00)) |
| if (*((unsigned long *) (0x7C00 + 0x1C))) |
| *((unsigned long *) (0x7C00 + 0x1C)) = 0; |
| } else { |
| if (! probe_bpb((struct master_and_dos_boot_sector *)0x7C00)) |
| if (*((unsigned long *) (0x7C00 + 0x1C)) == 0) |
| { |
| int err; |
| if ((err = probe_mbr ((struct master_and_dos_boot_sector *)0x7C00, 0, 1, 0))) |
| { |
| if (debug > 0) |
| printf ("Partition table not recognized(boot_drive=0x%X, err=%d). ", boot_drive, err); |
| errnum = ERR_HD_VOL_START_0; |
| break; |
| } |
| } |
| } |
| #ifdef FSYS_PXE |
| pxe_unload(); |
| #endif |
| chain_stage1 (0, 0x7C00, boot_part_addr); /* no return */ |
| break; |
| |
| case KERNEL_TYPE_MULTIBOOT: |
| /* Multiboot */ |
| |
| /* Set the boot loader name. */ |
| mbi.boot_loader_name = (unsigned long) "GNU GRUB " VERSION; |
| |
| /* Get the ROM configuration table by INT 15, AH=C0h. */ |
| mbi.config_table = get_rom_config_table (); |
| |
| #if 0 |
| /* Get the APM BIOS table. */ |
| get_apm_info (); |
| if (apm_bios_info.version) |
| { |
| mbi.apm_table = (unsigned long) &apm_bios_info; |
| mbi.flags |= MB_INFO_APM_TABLE; |
| } |
| #endif |
| |
| /* Get the drive info. */ |
| mbi.drives_length = 0; |
| mbi.drives_addr = (unsigned long)(saved_mmap_addr + saved_mmap_length); |
| |
| /* XXX: Too many drives will possibly use a piece of memory starting at 0x10000(64K). */ |
| |
| #ifdef GRUB_UTIL |
| #define FIND_DRIVES 8 |
| #else |
| #define FIND_DRIVES (*((char *)0x475)) |
| #endif |
| { |
| unsigned int drive; |
| unsigned long addr = mbi.drives_addr; |
| |
| for (drive = 0x80; drive < 0x80 + FIND_DRIVES; drive++) |
| { |
| struct drive_info *info = (struct drive_info *) addr; |
| |
| /* Get the geometry. This ensures that the drive is present. */ |
| |
| if (debug > 1) |
| grub_printf ("get_diskinfo(%X), ", drive); |
| |
| if (get_diskinfo (drive, &tmp_geom)) |
| continue;//break; |
| |
| if (debug > 1) |
| grub_printf (" %sC/H/S=%d/%d/%d, Sector Count/Size=%ld/%d\n", |
| ((tmp_geom.flags & BIOSDISK_FLAG_LBA_EXTENSION) ? "LBA, " : ""), |
| tmp_geom.cylinders, tmp_geom.heads, tmp_geom.sectors, |
| (unsigned long long)tmp_geom.total_sectors, tmp_geom.sector_size); |
| |
| /* Set the information. */ |
| info->drive_number = drive; |
| info->drive_mode = ((tmp_geom.flags & BIOSDISK_FLAG_LBA_EXTENSION) |
| ? MB_DI_LBA_MODE : MB_DI_CHS_MODE); |
| info->drive_cylinders = tmp_geom.cylinders; |
| info->drive_heads = tmp_geom.heads; |
| info->drive_sectors = tmp_geom.sectors; |
| |
| addr += sizeof (struct drive_info); |
| |
| info->size = addr - (unsigned long) info; |
| mbi.drives_length += info->size; |
| } |
| } |
| #undef FIND_DRIVES |
| |
| multi_boot ((int) entry_addr, (int) &mbi, 0, -1, 0, 0, 0); |
| break; |
| |
| default: |
| errnum = ERR_BOOT_COMMAND; |
| //return 0; |
| } |
| |
| old_errnum = errnum; |
| /* if we get back here, we should go back to what our term was before */ |
| setcursor (old_cursor); |
| current_term = prev_term; |
| if (current_term->startup) |
| /* if our terminal fails to initialize, fall back to console since |
| * it should always work */ |
| if ((*current_term->startup)() == 0) |
| current_term = term_table; /* we know that console is first */ |
| errnum = old_errnum; |
| return ! errnum; |
| } |
| |
| static struct builtin builtin_boot = |
| { |
| "boot", |
| boot_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST | BUILTIN_BOOTING, |
| "boot", |
| "Boot the OS/chain-loader which has been loaded." |
| }; |
| #endif /* ! GRUB_UTIL */ |
| |
| |
| #ifdef SUPPORT_NETBOOT |
| #ifndef GRUB_UTIL |
| /* bootp */ |
| static int |
| bootp_func (char *arg, int flags) |
| { |
| int with_configfile = 0; |
| |
| if (grub_memcmp (arg, "--with-configfile", sizeof ("--with-configfile") - 1) |
| == 0) |
| { |
| with_configfile = 1; |
| arg = skip_to (0, arg); |
| } |
| |
| if (! bootp ()) |
| { |
| if (errnum == ERR_NONE) |
| errnum = ERR_DEV_VALUES; |
| |
| return 0; |
| } |
| |
| /* Notify the configuration. */ |
| print_network_configuration (); |
| |
| /* XXX: this can cause an endless loop, but there is no easy way to |
| detect such a loop unfortunately. */ |
| if (with_configfile) |
| configfile_func (config_file, flags); |
| |
| return 1; |
| } |
| |
| static struct builtin builtin_bootp = |
| { |
| "bootp", |
| bootp_func, |
| BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_MENU | BUILTIN_HELP_LIST | BUILTIN_BOOTING, |
| "bootp [--with-configfile]", |
| "Initialize a network device via BOOTP. If the option `--with-configfile'" |
| " is given, try to load a configuration file specified by the 150 vendor" |
| " tag." |
| }; |
| #endif /* ! GRUB_UTIL */ |
| #endif /* SUPPORT_NETBOOT */ |
| |
| void hexdump(unsigned long ofs,char* buf,int len) |
| { |
| quit_print=0; |
| while (len>0) |
| { |
| int cnt,k; |
| |
| grub_printf ("%08X: ", ofs); |
| cnt=16; |
| if (cnt>len) |
| cnt=len; |
| |
| for (k=0;k<cnt;k++) |
| { |
| printf("%02X ", (unsigned long)(unsigned char)(buf[k])); |
| if ((k!=15) && ((k & 3)==3)) |
| printf(" "); |
| } |
| |
| for (;k<16;k++) |
| { |
| printf(" "); |
| if ((k!=15) && ((k & 3)==3)) |
| printf(" "); |
| } |
| |
| printf("; "); |
| |
| for (k=0;k<cnt;k++) |
| printf("%c",(unsigned long)((((unsigned char)buf[k]>=32) && ((unsigned char)buf[k]!=127))?buf[k]:'.')); |
| |
| printf("\n"); |
| |
| if (quit_print) |
| break; |
| |
| ofs+=16; |
| len-=cnt; |
| } |
| } |
| |
| |
| /* cat */ |
| static int |
| cat_func (char *arg, int flags) |
| { |
| unsigned char c; |
| unsigned char s[128]; |
| unsigned char r[128]; |
| unsigned long long Hex = 0; |
| unsigned long long len, i, j; |
| char *p; |
| unsigned long long skip = 0; |
| unsigned long long length = 0xffffffffffffffffULL; |
| char *locate = 0; |
| char *replace = 0; |
| unsigned long long locate_align = 1; |
| unsigned long long len_s; |
| unsigned long long len_r = 0; |
| unsigned long long ret = 0; |
| |
| quit_print = 0; |
| |
| for (;;) |
| { |
| if (grub_memcmp (arg, "--hex=", 6) == 0) |
| { |
| p = arg + 6; |
| if (! safe_parse_maxint (&p, &Hex)) |
| return 0; |
| } |
| else if (grub_memcmp (arg, "--hex", 5) == 0) |
| { |
| Hex = 1; |
| } |
| else if (grub_memcmp (arg, "--skip=", 7) == 0) |
| { |
| p = arg + 7; |
| if (! safe_parse_maxint_with_suffix (&p, &skip, 0)) |
| return 0; |
| } |
| else if (grub_memcmp (arg, "--length=", 9) == 0) |
| { |
| p = arg + 9; |
| if (! safe_parse_maxint_with_suffix (&p, &length, 0)) |
| return 0; |
| } |
| else if (grub_memcmp (arg, "--locate=", 9) == 0) |
| { |
| p = locate = arg + 9; |
| if (*p == '\"') |
| { |
| while (*(++p) != '\"'); |
| arg = ++p; // or: arg = p; |
| } |
| } |
| else if (grub_memcmp (arg, "--replace=", 10) == 0) |
| { |
| p = replace = arg + 10; |
| if (*replace == '*') |
| { |
| replace++; |
| if (! safe_parse_maxint (&replace, &len_r)) |
| replace = p; |
| } |
| if (*p == '\"') |
| { |
| while (*(++p) != '\"'); |
| arg = ++p; |
| } |
| } |
| else if (grub_memcmp (arg, "--locate-align=", 15) == 0) |
| { |
| p = arg + 15; |
| if (! safe_parse_maxint (&p, &locate_align)) |
| return 0; |
| if ((unsigned long)locate_align == 0) |
| return ! (errnum = ERR_BAD_ARGUMENT); |
| } |
| else |
| break; |
| arg = skip_to (0, arg); |
| } |
| if (! length) |
| { |
| if (grub_memcmp (arg,"()-1\0",5) == 0 ) |
| { |
| if (! grub_open ("()+1")) |
| return 0; |
| filesize = filemax*(unsigned long long)part_start; |
| } |
| else if (grub_memcmp (arg,"()\0",3) == 0 ) |
| { |
| if (! grub_open ("()+1")) |
| return 0; |
| filesize = filemax*(unsigned long long)part_length; |
| } |
| else |
| { |
| if (! grub_open (arg)) |
| return 0; |
| #ifndef NO_DECOMPRESSION |
| filesize = gzip_filemax; |
| #else |
| filesize = filemax; |
| #endif |
| } |
| grub_close(); |
| if (debug > 0) |
| grub_printf ("Filesize is 0x%lX\n", (unsigned long long)filesize); |
| //ret = filemax; |
| //return ret; |
| return filesize; |
| } |
| if (! grub_open (arg)) |
| return 0; |
| if (length > filemax) |
| length = filemax; |
| filepos = skip; |
| if (replace) |
| { |
| if (! len_r) |
| { |
| Hex = 0; |
| if (*replace == '\"') |
| { |
| for (i = 0; i < 128 && (r[i] = *(++replace)) != '\"'; i++); |
| }else{ |
| for (i = 0; i < 128 && (r[i] = *(replace++)) != ' ' && r[i] != '\t'; i++); |
| } |
| r[i] = 0; |
| len_r = parse_string ((char *)r); |
| } |
| else |
| { |
| if (! Hex) |
| Hex = -1ULL; |
| } |
| } |
| if (locate) |
| { |
| if (*locate == '\"') |
| { |
| for (i = 0; i < 128 && (s[i] = *(++locate)) != '\"'; i++); |
| }else{ |
| for (i = 0; i < 128 && (s[i] = *(locate++)) != ' ' && s[i] != '\t'; i++); |
| } |
| s[i] = 0; |
| len_s = parse_string ((char *)s); |
| if (len_s == 0 || len_s > 16) |
| return ! (errnum = ERR_BAD_ARGUMENT); |
| //j = skip; |
| grub_memset ((char *)(SCRATCHADDR), 0, 32); |
| for (j = skip; ; j += 16) |
| { |
| len = 0; |
| if (j - skip < length) |
| len = grub_read ((unsigned long long)(SCRATCHADDR + 16), 16, 0xedde0d90); |
| if (len < 16) |
| grub_memset ((char *)(SCRATCHADDR + 16 + (unsigned long)len), 0, 16 - len); |
| |
| if (j != skip) |
| { |
| for (i = 0; i < 16; i++) |
| { |
| unsigned long long k = j - 16 + i; |
| if (locate_align == 1 || ! ((unsigned long)k % (unsigned long)locate_align)) |
| if (! grub_memcmp ((char *)&s, (char *)(SCRATCHADDR + (unsigned long)i), len_s)) |
| { |
| /* print the address */ |
| if (debug > 0) |
| grub_printf (" %lX", (unsigned long long)k); |
| /* replace strings */ |
| if ((replace) && len_r) |
| { |
| unsigned long long filepos_bak; |
| |
| filepos_bak = filepos; |
| filepos = k; |
| if (Hex) |
| { |
| grub_read (len_r,(Hex == -1ULL)?8:Hex, 0x900ddeed); |
| i = ((Hex == -1ULL)?8:Hex)+i; |
| } |
| else |
| { |
| /* write len_r bytes at string r to file!! */ |
| grub_read ((unsigned long long)(unsigned int)(char *)&r, len_r, 0x900ddeed); |
| i = i+len_r; |
| } |
| i--; |
| filepos = filepos_bak; |
| //if (debug > 0) |
| // grub_putchar('!'); |
| } |
| ret++; |
| } |
| } |
| } |
| if (len == 0) |
| break; |
| grub_memmove ((char *)SCRATCHADDR, (char *)(SCRATCHADDR + 16), 16); |
| } |
| }else if (Hex == (++ret)) /* a trick for (ret = 1, Hex == 1) */ |
| { |
| for (j = skip; j - skip < length && (len = grub_read ((unsigned long long)(unsigned long)&s, 16, 0xedde0d90)); j += 16) |
| { |
| if (debug > 0) |
| hexdump(j,(char*)&s,(len>length+skip-j)?(length+skip-j):len); |
| if (quit_print) |
| break; |
| } |
| }else |
| for (j = 0; j < length && grub_read ((unsigned long long)(unsigned long)&c, 1, 0xedde0d90); j++) |
| { |
| #if 1 |
| if (debug > 0) |
| grub_putchar (c); |
| #else |
| /* Because running "cat" with a binary file can confuse the terminal, |
| print only some characters as they are. */ |
| if (grub_isspace (c) || (c >= ' ' && c <= '~')) |
| grub_putchar (c); |
| else |
| grub_putchar ('?'); |
| #endif |
| if (quit_print) |
| break; |
| } |
| |
| grub_close (); |
| return ret; |
| } |
| |
| static struct builtin builtin_cat = |
| { |
| "cat", |
| cat_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "cat [--hex] [--skip=S] [--length=L] [--locate=STRING] [--locate-align=A] FILE", |
| "Print the contents of the file FILE, or print the locations " |
| "of the string STRING in FILE." |
| }; |
| |
| |
| #if ! defined(GRUB_UTIL) && ! defined (STAGE1_5) |
| /* cdrom */ |
| static int |
| cdrom_func (char *arg, int flags) |
| { |
| for (;;) |
| { |
| if (grub_memcmp (arg, "--add-io-ports=", 15) == 0) |
| { |
| char *p; |
| unsigned long long tmp; |
| |
| p = arg + 15; |
| if (! safe_parse_maxint (&p, &tmp)) |
| return 0; |
| *reg_base_addr_append = tmp; |
| return 1; |
| } |
| else if (grub_memcmp (arg, "--init", 6) == 0) |
| { |
| init_atapi(); |
| |
| if (atapi_dev_count) |
| { |
| if (debug > 0) |
| printf("\nFound %d CD-ROM%s. (Note: Further read could fail if the hardware does not\nfully support ATAPI).\n", atapi_dev_count, (atapi_dev_count > 1 ? "s" : "")); |
| } else { |
| if (debug > 0) |
| printf("\nNo CD-ROMs found. Perhaps the hardware does not fully support ATAPI. If your\nCD-ROM uses unusual I/O ports, please specify them with \"--add-io-ports=P\".\n"); |
| } |
| return atapi_dev_count; |
| } |
| else if (grub_memcmp (arg, "--stop", 6) == 0) |
| { |
| atapi_dev_count = 0; |
| return 1; |
| } |
| else |
| return ! (errnum = ERR_BAD_ARGUMENT); |
| arg = skip_to (0, arg); |
| } |
| |
| return 1; |
| } |
| |
| static struct builtin builtin_cdrom = |
| { |
| "cdrom", |
| cdrom_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "cdrom --add-io-ports=P | --init | --stop", |
| "Initialise/stop atapi cdroms or set additional I/O ports for a possible atapi cdrom device." |
| " The high word of P specifies the base register of the control block registers, and" |
| " the low word of P specifies the base register of the command block registers." |
| }; |
| #endif /* ! defined(GRUB_UTIL) && ! defined (STAGE1_5) */ |
| |
| |
| /* chainloader */ |
| static int |
| chainloader_func (char *arg, int flags) |
| { |
| char *p; |
| |
| int force = 0; |
| char *filename; |
| |
| chainloader_load_segment_orig = chainloader_load_segment; |
| chainloader_load_offset_orig = chainloader_load_offset; |
| chainloader_load_length_orig = chainloader_load_length; |
| chainloader_skip_length_orig = chainloader_skip_length; |
| chainloader_boot_CS_orig = chainloader_boot_CS; |
| chainloader_boot_IP_orig = chainloader_boot_IP; |
| chainloader_ebx_orig = chainloader_ebx; |
| chainloader_ebx_set_orig = chainloader_ebx_set; |
| chainloader_edx_orig = chainloader_edx; |
| chainloader_edx_set_orig = chainloader_edx_set; |
| chainloader_disable_A20_orig = chainloader_disable_A20; |
| is_sdi_orig = is_sdi; |
| is_raw_orig = is_raw; |
| is_isolinux_orig = is_isolinux; |
| is_grldr_orig = is_grldr; |
| is_io_orig = is_io; |
| kernel_type_orig = kernel_type; |
| grub_memmove ((char *)chainloader_file_orig, (char *)chainloader_file, sizeof(chainloader_file)); |
| |
| chainloader_load_segment = -1;//0x0000; |
| chainloader_load_offset = -1;//0x7c00; |
| chainloader_load_length = -1;//0x200; |
| chainloader_skip_length = 0; |
| chainloader_boot_CS = -1;//0x0000; |
| chainloader_boot_IP = -1;//0x7c00; |
| chainloader_ebx = 0; |
| chainloader_ebx_set = 0; |
| chainloader_edx = 0; |
| chainloader_edx_set = 0; |
| chainloader_disable_A20 = 0; |
| is_sdi = is_raw = 0; |
| is_isolinux = 0; |
| is_grldr = 0; |
| is_io = 0; |
| kernel_type = KERNEL_TYPE_CHAINLOADER; |
| |
| for (;;) |
| { |
| if (grub_memcmp (arg, "--force", 7) == 0) |
| { |
| force = 1; |
| } |
| else if (grub_memcmp (arg, "--load-segment=", 15) == 0) |
| { |
| unsigned long long ull; |
| p = arg + 15; |
| if (! safe_parse_maxint (&p, &ull)) |
| goto failure; |
| if (ull >= 0xA000) |
| { |
| errnum = ERR_INVALID_LOAD_SEGMENT; |
| goto failure; |
| } |
| chainloader_load_segment = ull; |
| } |
| else if (grub_memcmp (arg, "--load-offset=", 14) == 0) |
| { |
| unsigned long long ull; |
| p = arg + 14; |
| if (! safe_parse_maxint (&p, &ull)) |
| goto failure; |
| if (ull > 0xF800) |
| { |
| errnum = ERR_INVALID_LOAD_OFFSET; |
| goto failure; |
| } |
| chainloader_load_offset = ull; |
| } |
| else if (grub_memcmp (arg, "--load-length=", 14) == 0) |
| { |
| unsigned long long ull; |
| p = arg + 14; |
| if (! safe_parse_maxint (&p, &ull)) |
| goto failure; |
| if (ull < 512 || ull > 0xA0000) |
| { |
| errnum = ERR_INVALID_LOAD_LENGTH; |
| goto failure; |
| } |
| chainloader_load_length = ull; |
| } |
| else if (grub_memcmp (arg, "--skip-length=", 14) == 0) |
| { |
| unsigned long long ull; |
| p = arg + 14; |
| if (! safe_parse_maxint (&p, &ull)) |
| goto failure; |
| //if (chainloader_skip_length < 0) |
| //{ |
| // errnum = ERR_INVALID_SKIP_LENGTH; |
| // goto failure; |
| //} |
| chainloader_skip_length = ull; |
| } |
| else if (grub_memcmp (arg, "--boot-cs=", 10) == 0) |
| { |
| unsigned long long ull; |
| p = arg + 10; |
| if (! safe_parse_maxint (&p, &ull)) |
| goto failure; |
| if (ull > 0xffff) |
| { |
| errnum = ERR_INVALID_BOOT_CS; |
| goto failure; |
| } |
| chainloader_boot_CS = ull; |
| } |
| else if (grub_memcmp (arg, "--boot-ip=", 10) == 0) |
| { |
| unsigned long long ull; |
| p = arg + 10; |
| if (! safe_parse_maxint (&p, &ull)) |
| goto failure; |
| if (ull > 0xffff) |
| { |
| errnum = ERR_INVALID_BOOT_IP; |
| goto failure; |
| } |
| chainloader_boot_IP = ull; |
| } |
| else if (grub_memcmp (arg, "--ebx=", 6) == 0) |
| { |
| unsigned long long ull; |
| p = arg + 6; |
| if (! safe_parse_maxint (&p, &ull)) |
| goto failure; |
| chainloader_ebx = ull; |
| chainloader_ebx_set = 1; |
| } |
| else if (grub_memcmp (arg, "--edx=", 6) == 0) |
| { |
| unsigned long long ull; |
| p = arg + 6; |
| if (! safe_parse_maxint (&p, &ull)) |
| goto failure; |
| chainloader_edx = ull; |
| chainloader_edx_set = 1; |
| } |
| else if (grub_memcmp (arg, "--sdi", 5) == 0) |
| { |
| is_sdi = 1; |
| } |
| else if (grub_memcmp (arg, "--raw", 5) == 0) |
| { |
| is_raw = 1; |
| } |
| else if (grub_memcmp (arg, "--disable-a20", 13) == 0) |
| { |
| chainloader_disable_A20 = 1; |
| } |
| else |
| break; |
| arg = skip_to (0, arg); |
| } |
| |
| if (grub_strlen(saved_dir) + grub_strlen(arg) + 20 >= sizeof(chainloader_file)) |
| { |
| errnum = ERR_WONT_FIT; |
| goto failure; |
| } |
| |
| if (*arg == '/') |
| { |
| if (saved_partition != 0xFFFFFF) |
| { |
| if ((saved_partition & 0xFF00) == 0xFF00) |
| grub_sprintf (chainloader_file, "(%d,%d)%s%s", saved_drive, (unsigned long)(unsigned char)(saved_partition>>16), saved_dir, arg); |
| else |
| if ((saved_partition & 0xFF0000) == 0xFF0000) |
| grub_sprintf (chainloader_file, "(%d,%c)%s%s", saved_drive, (unsigned long)(unsigned char)((saved_partition>>8) + 'a'), saved_dir, arg); |
| else |
| grub_sprintf (chainloader_file, "(%d,%d,%c)%s%s", saved_drive, (unsigned long)(unsigned char)(saved_partition>>16), (unsigned long)(unsigned char)((saved_partition>>8) + 'a'), saved_dir, arg); |
| } |
| else |
| grub_sprintf (chainloader_file, "(%d)%s%s", saved_drive, saved_dir, arg); |
| } |
| else if (*arg == '(' && arg[1] == ')') |
| { |
| if (saved_partition != 0xFFFFFF) |
| { |
| if ((saved_partition & 0xFF00) == 0xFF00) |
| grub_sprintf (chainloader_file, "(%d,%d)%s", saved_drive, (unsigned long)(unsigned char)(saved_partition>>16), (arg + 2)); |
| else |
| if ((saved_partition & 0xFF0000) == 0xFF0000) |
| grub_sprintf (chainloader_file, "(%d,%c)%s", saved_drive, (unsigned long)(unsigned char)((saved_partition>>8) + 'a'), (arg + 2)); |
| else |
| grub_sprintf (chainloader_file, "(%d,%d,%c)%s", saved_drive, (unsigned long)(unsigned char)(saved_partition>>16), (unsigned long)(unsigned char)((saved_partition>>8) + 'a'), (arg + 2)); |
| } |
| else |
| grub_sprintf (chainloader_file, "(%d)%s", saved_drive, (arg + 2)); |
| } else if (*arg != '(') |
| { |
| if (saved_partition != 0xFFFFFF) |
| { |
| if ((saved_partition & 0xFF00) == 0xFF00) |
| grub_sprintf (chainloader_file, "(%d,%d)%s", saved_drive, (unsigned long)(unsigned char)(saved_partition>>16), arg); |
| else |
| if ((saved_partition & 0xFF0000) == 0xFF0000) |
| grub_sprintf (chainloader_file, "(%d,%c)%s", saved_drive, (unsigned long)(unsigned char)((saved_partition>>8) + 'a'), arg); |
| else |
| grub_sprintf (chainloader_file, "(%d,%d,%c)%s", saved_drive, (unsigned long)(unsigned char)(saved_partition>>16), (unsigned long)(unsigned char)((saved_partition>>8) + 'a'), arg); |
| } |
| else |
| grub_sprintf (chainloader_file, "(%d)%s", saved_drive, arg); |
| } |
| else |
| grub_memmove (chainloader_file, arg, 255); |
| chainloader_file[255]=0; |
| |
| errnum = ERR_NONE; |
| |
| if ((is_sdi) || (is_raw)) |
| return 1; |
| |
| // if (debug > 0) |
| // printf ("Debug: chainloader_func: set_device(%s) ...", arg); |
| |
| /* Get the drive number. */ |
| filename = set_device (arg); |
| |
| // if (debug > 0) |
| // /* wipe out debug message. */ |
| // printf ("\r \r"); |
| |
| if (errnum) { |
| /* No device specified. Default to the root device. */ |
| current_drive = saved_drive; |
| //current_partition = saved_partition; |
| filename = arg; |
| errnum = 0; |
| } |
| |
| if (filename == 0) |
| filename = arg; |
| if (current_drive == 0xFFFF || current_drive == ram_drive) |
| { |
| if (! chainloader_edx_set) |
| { |
| chainloader_edx = saved_drive | ((saved_partition >> 8) & 0xFF00); |
| chainloader_edx_set=1; |
| } |
| } |
| #ifndef GRUB_UTIL |
| /* check bootable cdrom */ |
| if (*filename == 0 || *filename == ' ' || *filename == '\t') |
| { |
| //check_bootable_cdrom (current_drive); |
| unsigned long i; |
| unsigned long tmp; |
| unsigned short tmp1; |
| unsigned short tmp2; |
| // struct geometry tmp_geom; |
| |
| tmp = current_drive; |
| /* check bootable type of drive (tmp) */ |
| |
| /* Get the geometry. This ensures that the drive is present. */ |
| if (get_diskinfo (tmp, &tmp_geom)) |
| { |
| errnum = ERR_NO_DISK; |
| goto failure; |
| } |
| |
| /* open the drive */ |
| |
| grub_sprintf ((char *)SCRATCHADDR, "(0x%X)+0x%lX", tmp, (unsigned long long)tmp_geom.total_sectors); |
| |
| if (! grub_open ((char *)SCRATCHADDR)) |
| goto failure; |
| |
| /****************************************/ |
| /* read the EL Torito Volume Descriptor */ |
| /****************************************/ |
| |
| //filemax = 0x12 * 0x800; |
| filepos = 0x11 * 0x800; |
| |
| if (grub_read ((unsigned long long)SCRATCHADDR, 512, 0xedde0d90) != 512) |
| goto failure_exec_format; |
| |
| /* check the EL Torito Volume Descriptor */ |
| |
| if (memcmp ((char *)SCRATCHADDR, "\0CD001\1EL TORITO SPECIFICATION\0", 31)) |
| goto failure_exec_format; |
| |
| /* get absolut start sector number for boot catalog */ |
| tmp = *(unsigned long *)((char *)SCRATCHADDR + 0x47); |
| |
| /********************************************/ |
| /* read the first 512 bytes of Boot Catalog */ |
| /********************************************/ |
| |
| //filemax = (tmp + 1) * 0x800; |
| filepos = tmp * 0x800; |
| |
| if (grub_read ((unsigned long long)SCRATCHADDR, 512, 0xedde0d90) != 512) |
| goto failure_exec_format; |
| |
| /*******************************/ |
| /* check the Validation Entry */ |
| /*******************************/ |
| |
| tmp1 = 0; |
| for (i = 0; i < 16; i++) |
| { |
| tmp = *(((unsigned short *)(char *)SCRATCHADDR) + i); |
| tmp1 += tmp; |
| if ((i == 0 && tmp != 1) || (i == 15 && tmp != 0xAA55)) |
| break; |
| } |
| |
| if (tmp1 || i < 16) |
| goto failure_exec_format; |
| |
| /* Boot Record Volume Descriptor format |
| * |
| * Offset Type Description |
| * ------ ---- ---------------------------------------------- |
| * 0 Byte Boot Record Indicator, must be 0 |
| * |
| * 1-5 Characters ISO-9660 Identifier, must be "CD001" |
| * |
| * 6 Byte Version of this descriptor, must be 1 |
| * |
| * 7-26 Characters Boot System Identifier, must be |
| * "EL TORITO SPECIFICATION" padded with 0's. |
| * |
| * 27-46 Characters Unused, must be 0. |
| * |
| * 47-4A Dword LBA of the first sector of Boot Catalog. |
| * |
| * 4B-7FF Characters Unused, must be 0. |
| * |
| */ |
| |
| /* Validation Entry format |
| * |
| * Offset Type Description |
| * ------ ---- ---------------------------------------------- |
| * 0 Byte Header ID, must be 01 |
| * |
| * 1 Byte Platform ID |
| * 0 = 80x86 |
| * 1 = Power PC |
| * 2 = Mac |
| * |
| * 2-3 Word Reserved, must be 0 |
| * |
| * 4-1B Characters ID string. This is intended to identify the |
| * manufacturer/developer of the CD-ROM. |
| * |
| * 1C-1D Word Checksum Word. This sum of all the words in |
| * this record should be 0. |
| * |
| * 1E Byte Key byte, must be 55. This value is included |
| * in the checksum. |
| * |
| * 1F Byte Key byte, must be AA. This value is included |
| * in the checksum. |
| * |
| */ |
| |
| /* Initial/Default Entry format |
| * |
| * Offset Type Description |
| * ------ ---- ---------------------------------------------- |
| * 0 Byte Boot Indicator. 88=Bootable, 00=Not Bootable |
| * |
| * 1 Byte Boot media type. |
| * 0 = No Emulation |
| * 1 = 1.2 meg diskette |
| * 2 = 1.44 meg diskette |
| * 3 = 2.88 meg diskette |
| * 4 = Hard Disk(drive 80) |
| * |
| * 2 Word Load Segment. 0 for 7C0 |
| * |
| * 4 Byte System Type. |
| * |
| * 5 Byte Unused, must be 0. |
| * |
| * 6 Word Sector Count. This is the number of virtual/ |
| * emulated sectors the system will store at Load |
| * Segment during the initial boot procedure. |
| * |
| * 8 DWord Load RBA. This is the start address of the |
| * virtual disk. CD's use Relative/Logical block |
| * addressing. |
| * |
| * C Bytes Unused, must be 0's. |
| * |
| */ |
| |
| /* Specification Packet format |
| * |
| * Offset Type Description |
| * ------ ---- ---------------------------------------------- |
| * 0 Byte Packet Size, currently 13 |
| * |
| * 1 Byte Boot media type. This specifies what media the |
| * boot image is intended to emulate in bits 0-3. |
| * Bits 6-7 are specific to the type of system. |
| * |
| * Bits 0-3 count as follows: |
| * |
| * 0: No Emulation |
| * 1: 1.2 meg diskette |
| * 2: 1.44 meg diskette |
| * 3: 2.88 meg diskette |
| * 4: Hard Disk (drive C) |
| * |
| * 5-F: Reserved, invalid at this time |
| * |
| * bits 4-5 - Reserved, must be 0 |
| * bit 6 - Image contains an ATAPI driver, |
| * bytes 8 & 9 refer to IDE interface |
| * bit 7 - Image contains SCSI drivers, |
| * bytes 8 & 9 refer to SCSI interface |
| * |
| * 2 Byte Drive Number. This is the drive number on |
| * which emulation is being initiated or |
| * terminated. This must be 0 for a floppy image, |
| * 80 for a bootable hard disk, and 81-FF for a |
| * "non-bootable" or "no emulation" drive. |
| * |
| * 3 Byte Controller Index. This specifies the controller |
| * number of the specified CD drive. |
| * |
| * 4-7 Dword Logical Block Address for the disk image to be |
| * emulated. |
| * |
| * 8-9 Word Device Specification. For SCSI controllers byte |
| * 8 is the LUN and PUN of the CD Drive, byte 9 is |
| * the Bus number. For IDE controllers the low |
| * order bit of byte 8 specifies master/slave |
| * device, 0 = master. |
| * |
| * A-B Word User Buffer Segment. If this field is non-zero |
| * it specifies the segment of a user supplied 3k |
| * buffer for caching CD reads. This buffer will |
| * begin at Segment:0. |
| * |
| * C-D Word Load Segment. This is the load address for the |
| * initial boot image. If this value is 0, the |
| * system will use the traditional segment of 7C0. |
| * If this value is non-zero the system will use |
| * the specified address. This field is only valid |
| * for function 4C. |
| * |
| * E-F Word Sector Count. This is the number of virtual |
| * sectors the system will store at Load Segment |
| * during the initial boot procedure. This field |
| * is only valid for function 4C. |
| * |
| * 10 Byte Bits 0-7 of the cylinder count. This should |
| * match the value returned in CH when INT 13 |
| * function 08 is invoked. |
| * |
| * 11 Byte This is the value returned in the CL register |
| * when INT 13 function 08 is invoked. Bits 0-5 |
| * are the sector count. Bits 6 and 7 are the high |
| * order 2 bits of the cylinder count. |
| * |
| * 12 Byte This is the head count, it should match the |
| * value in DH when INT 13 Function 08 is invoked. |
| * |
| */ |
| |
| /***********************************/ |
| /* check the Initial/Default Entry */ |
| /***********************************/ |
| |
| /* XXX: assume Initial/Default Entry is always at offset 0x20 */ |
| |
| tmp = *(unsigned char *)(SCRATCHADDR + 0x20); /* Boot Indicator. 88=Bootable, 00=Not Bootable */ |
| |
| if (tmp != 0x88) |
| goto failure_exec_format; |
| |
| tmp = *((unsigned char *)SCRATCHADDR + 0x25); /* Unused byte, must be 0. */ |
| |
| if (tmp) |
| goto failure_exec_format; |
| |
| tmp2 = *((unsigned short *)((unsigned char *)SCRATCHADDR + 0x22)); /* Load Segment */ |
| |
| if (debug > 0) |
| printf ("\nLoad segment: 0x%X\t", (unsigned long)tmp2); |
| |
| if (tmp2 == 0) |
| tmp2 = 0x7C0; |
| |
| // *(unsigned short *)&(chainloader_file[0x0C]) = tmp2; /* 0C-0D: load segment */ |
| |
| tmp = *((unsigned char *)SCRATCHADDR + 0x24); /* System Type */ |
| |
| if (debug > 0) |
| printf ("System Type: 0x%X\t", (unsigned long)tmp); |
| |
| i = *((unsigned short *)((unsigned char *)SCRATCHADDR + 0x26)); /* Sector Count */ |
| |
| if (debug > 0) |
| printf ("Sector Count: 0x%X\n", (unsigned long)i); |
| |
| // *(unsigned short *)&(chainloader_file[0x0E]) = i; /* 0E-0F: sector count in 512-byte sectors */ |
| |
| tmp = *((unsigned long *)((unsigned char *)SCRATCHADDR + 0x28)); /* Load RBA */ |
| |
| if (debug > 0) |
| printf ("Load RBA: 0x%X\t", (unsigned long)tmp); |
| |
| // *(unsigned long *)&(chainloader_file[4]) = tmp; /* 04-07: LBA of the image to be emulated */ |
| |
| tmp1 = *((unsigned char *)SCRATCHADDR + 0x21); /* Boot media type */ |
| |
| if (tmp1 > 4) |
| goto failure_exec_format; |
| |
| if (debug > 0) |
| printf ("Boot Type: %s\n", |
| tmp1 == 0 ? "0 = No Emulation" : |
| tmp1 == 1 ? "1 = 1.2M floppy" : |
| tmp1 == 2 ? "2 = 1.44M floppy" : |
| tmp1 == 3 ? "3 = 2.88M floppy" : "Hard Disk"); |
| |
| // chainloader_file[1] = tmp1; /* 01: boot media type */ |
| // chainloader_file[2] = ((tmp1 == 0) ? current_drive : (tmp1 == 4) ? 0x80 : 0x00); /* 02: drive number */ |
| |
| if (tmp1 == 0) /* no-emulation mode */ |
| { |
| /* No emulation mode uses 2048-byte sector size. */ |
| if (buf_geom.sector_size != 2048) |
| goto failure_exec_format; |
| //kernel_type = KERNEL_TYPE_CHAINLOADER; |
| sprintf (chainloader_file, "(%d)%d+%d", current_drive, tmp, (unsigned long)((i + 3) / 4)); |
| chainloader_load_segment = tmp2;//0x0000; |
| chainloader_load_offset = 0;//0x7c00; |
| chainloader_load_length = i * 512;//0x200; |
| chainloader_skip_length = 0; |
| chainloader_boot_CS = tmp2;//0x0000; |
| chainloader_boot_IP = 0;//0x7c00; |
| //chainloader_ebx = 0; |
| //chainloader_ebx_set = 0; |
| chainloader_edx = current_drive; |
| chainloader_edx_set = 1; |
| //chainloader_disable_A20 = 0; |
| |
| /* update lba_cd_boot if there are any maps */ |
| if (! unset_int13_handler (0)) /* a successful unset */ |
| { |
| if (drive_map_slot_empty (bios_drive_map[0])) |
| if (atapi_dev_count == 0) |
| { |
| errnum = ERR_NO_DRIVE_MAPPED; |
| goto failure_exec_format; |
| } |
| lba_cd_boot = tmp; |
| |
| set_int13_handler (bios_drive_map); |
| } |
| |
| /* needn't clear disk buffer */ |
| /* buf_drive = -1; */ |
| /* buf_track = -1; */ |
| |
| return ! (errnum = 0); |
| } |
| |
| /* floppy or hard drive emulation. LBA=tmp */ |
| |
| /*******************************************************/ |
| /* read the first 512 bytes of the image at 0000:7C00 */ |
| /*******************************************************/ |
| |
| filepos = tmp * 0x800; |
| |
| /* we cannot use SCRATCHADDR because map_func and geometry_func may |
| * use it. So we use 1 sector below 0x2B0000 instead. */ |
| if (grub_read ((unsigned long long)(HMA_ADDR - 0x200), 512, 0xedde0d90) != 512) |
| goto failure_exec_format; |
| |
| { |
| unsigned long heads = 0; |
| unsigned long sects = 0; |
| |
| if (tmp1 == 4) |
| { |
| int err; |
| if ((err = probe_mbr ((struct master_and_dos_boot_sector *)(HMA_ADDR - 0x200), 0, 1, 0))) |
| { |
| if (debug > 0) |
| printf ("Warning! Partition table of HD image is faulty(err=%d).\n", err); |
| sects = (*(unsigned char *)(HMA_ADDR - 0x200 + 0x1C4)) & 0x3F; |
| probed_total_sectors = *(unsigned long *)(HMA_ADDR - 0x200 + 0x1CA); |
| if (sects < 2 || probed_total_sectors < 5) |
| { |
| errnum = ERR_BAD_PART_TABLE; |
| goto failure_exec_format; |
| } |
| heads = *(unsigned char *)(HMA_ADDR - 0x200 + 0x1C3); |
| //if (heads < 255) |
| heads++; |
| if (debug > 0) |
| printf ("Use Heads=%d, SectorsPerTrack=%d, TotalSectors=%ld for HD emulation.\n", heads, sects, (unsigned long long)probed_total_sectors); |
| } |
| } else { |
| if (probe_bpb((struct master_and_dos_boot_sector *)(HMA_ADDR - 0x200))) |
| { |
| probed_total_sectors = (tmp1 == 1 ? 2400 : tmp1 == 2 ? 2880 : 5760); |
| } |
| } |
| |
| /* map the image */ |
| sprintf (chainloader_file, "--read-only --heads=%d --sectors-per-track=%d (%d)%d+%d (%d)", |
| (unsigned long)heads, |
| (unsigned long)sects, |
| (unsigned long)current_drive, |
| (unsigned long)tmp, |
| (unsigned long)((probed_total_sectors + 3) / 4), //0x3FFFFFFF, |
| (unsigned long)((tmp1 == 4) ? 0x80 : 0x00)); |
| } |
| |
| tmp = ( (tmp1 == 4) ? (*(char *)0x475) : ((*(char*)0x410) & 1) ); |
| |
| /* file must be closed before calling map_func() */ |
| grub_close (); |
| |
| disable_map_info = 1; |
| map_func (chainloader_file, flags); |
| disable_map_info = 0; |
| |
| if (errnum) |
| goto failure; |
| |
| /* move the former fd0 or hd0 up. */ |
| if (tmp) |
| { |
| sprintf (chainloader_file, "(%d) (%d)", (unsigned long)((tmp1 == 4) ? 0x80 : 0x00), (unsigned long)((tmp1 == 4) ? (0x80 + tmp) : 0x01)); |
| |
| map_func (chainloader_file, flags); |
| |
| if (errnum) |
| { |
| if (debug > 0) |
| { |
| printf ("Failed 'map %s'(error=%d). But you may ignore it and continue to 'boot' the CD.\n", chainloader_file, errnum); |
| } |
| errnum = 0; |
| } |
| } |
| |
| /* rehook */ |
| unset_int13_handler (0); |
| if (drive_map_slot_empty (bios_drive_map[0])) |
| if (atapi_dev_count == 0) |
| { |
| errnum = ERR_NO_DRIVE_MAPPED; |
| goto failure; |
| } |
| set_int13_handler (bios_drive_map); |
| buf_drive = -1; |
| buf_track = -1; |
| |
| grub_memmove ((char *)0x7C00, (char *)(HMA_ADDR - 0x200), 512); |
| sprintf (chainloader_file, "(%d)+1", (unsigned long)((tmp1 == 4) ? 0x80 : 0x00)); |
| |
| chainloader_load_segment = 0;//tmp2; |
| chainloader_load_offset = 0x7c00; |
| chainloader_load_length = 512; |
| chainloader_skip_length = 0; |
| chainloader_boot_CS = 0;//tmp2; |
| chainloader_boot_IP = 0x7c00; |
| //chainloader_ebx = 0; |
| chainloader_ebx_set = 0; |
| chainloader_edx_set = 0; |
| //chainloader_disable_A20 = 0; |
| saved_drive = ((tmp1 == 4) ? 0x80 : 0x00); |
| chainloader_edx = saved_drive; |
| saved_partition = ((tmp1 == 4) ? 0x00FFFF : 0xFFFFFF); |
| return ! (errnum = 0); |
| |
| } |
| #endif /* ! GRUB_UTIL */ |
| |
| /* Open the file. */ |
| grub_open (arg); |
| |
| if (errnum) |
| goto failure; |
| |
| /* Read the first block. */ |
| { |
| unsigned long len; |
| len = grub_read ((unsigned long long) SCRATCHADDR, 512, 0xedde0d90); |
| |
| if (len != 512) |
| goto failure_exec_format; |
| } |
| |
| if (chainloader_skip_length > filemax) |
| { |
| errnum = ERR_INVALID_SKIP_LENGTH; |
| goto failure_exec_format; |
| } |
| |
| if (*((long *)SCRATCHADDR) == 0x49445324 /* $SDI */) |
| { |
| is_sdi = 1; |
| if (debug > 0) |
| grub_printf("SDI signature: %s\n", (char *)(SCRATCHADDR)); |
| } |
| else |
| if ((*(long long *)SCRATCHADDR | 0xFF00LL) == 0x4749464E4F43FFEBLL && filemax > 0x4000) |
| { |
| |
| if (chainloader_load_segment == -1) |
| chainloader_load_segment = 0x0060; |
| if (chainloader_load_offset == -1) |
| chainloader_load_offset = 0; |
| if (chainloader_load_length == -1) |
| chainloader_load_length = filemax; |
| if (! chainloader_ebx_set) |
| { |
| chainloader_ebx = current_drive | ((current_partition >> 8) & 0xFF00); |
| chainloader_ebx_set = 1; |
| } |
| |
| grub_close (); |
| |
| /* FIXME: Where should the BPB be placed for FreeDOS's KERNEL.SYS? |
| * In the current implementation it is placed at 0000:7C00 |
| * but has no effect, since the KERNEL.SYS body will later |
| * overwrite 0000:7C00 on issuing the `boot' command. |
| */ |
| |
| if ((chainloader_ebx & 0xFF00) == 0xFF00) /* check if partition number == 0xFF */ |
| grub_sprintf ((char *)SCRATCHADDR, "(%d)+1", (unsigned long)(unsigned char)chainloader_ebx); |
| else |
| grub_sprintf ((char *)SCRATCHADDR, "(%d,%d)+1", (unsigned long)(unsigned char)chainloader_ebx, (unsigned long)(unsigned char)(chainloader_ebx >> 8)); |
| |
| if (! grub_open ((char *)SCRATCHADDR)) |
| goto failure; |
| |
| /* Read the boot sector of the partition onto 0000:7C00 */ |
| if (grub_read ((unsigned long long) SCRATCHADDR, 512, 0xedde0d90) != 512) |
| goto failure_exec_format; |
| |
| /* modify the hidden sectors */ |
| /* FIXME: Does the boot drive number also need modifying? */ |
| |
| if (*((unsigned long *) (SCRATCHADDR + BOOTSEC_BPB_HIDDEN_SECTORS))) |
| *((unsigned long *) (SCRATCHADDR + BOOTSEC_BPB_HIDDEN_SECTORS)) = (unsigned long)part_start; |
| if (debug > 0) |
| grub_printf("Will boot FreeDOS from drive=0x%x, partition=0x%x(hidden sectors=0x%lx)\n", |
| current_drive, (unsigned long)(unsigned char)(current_partition >> 16), (unsigned long long)part_start); |
| } |
| else |
| if (*(short *)SCRATCHADDR == 0x5A4D && filemax > 0x10000 && |
| *((unsigned short *) (SCRATCHADDR + BOOTSEC_SIG_OFFSET)) == 0 |
| /* && (*(long *)(SCRATCHADDR + 0xA2)) == 0 */ ) |
| { |
| |
| int err; |
| |
| /* Read the second sector. */ |
| if (grub_read ((unsigned long long) SCRATCHADDR, 512, 0xedde0d90) != 512) |
| goto failure_exec_format; |
| |
| err = (*(short *)SCRATCHADDR != 0x4A42); |
| |
| filepos += 0x200; /* skip the third sector */ |
| |
| /* Read the fourth sector. */ |
| if (grub_read ((unsigned long long) SCRATCHADDR, 512, 0xedde0d90) != 512) |
| goto failure_exec_format; |
| |
| err |= (*((unsigned short *) (SCRATCHADDR + BOOTSEC_SIG_OFFSET)) != 0x534D); |
| |
| /* Read the fifth sector. |
| * check the compress signature "CM" of IO.SYS of WinME */ |
| if (grub_read ((unsigned long long) SCRATCHADDR, 512, 0xedde0d90) != 512) |
| goto failure_exec_format; |
| |
| if (! err) |
| { |
| if (chainloader_load_segment == -1) |
| chainloader_load_segment = 0x0070; |
| if (chainloader_load_offset == -1) |
| chainloader_load_offset = 0; |
| if (chainloader_load_length == -1) |
| chainloader_load_length = filemax; |
| if (chainloader_skip_length == 0) |
| chainloader_skip_length = 0x0800; |
| |
| /* WinME support by bean. Thanks! */ |
| |
| // Input parameter for SYSINIT |
| // BX,AX: Start sector for the data area of FAT. It doesn't needs to |
| // be set. However, we should at least clear BX, otherwise, |
| // it would have some minor problem when booting WinME. |
| // DI: Length of the boot code, don't need to be set. |
| // BP: 0x7C00, boot sector pointer, don't need to be set. |
| // DH: Media ID (BS[0x15]) , 0xF0 for floppy, 0xF8 for harddisk |
| // DL: Drive number (BS[0x40] for FAT32) |
| |
| if (! chainloader_edx_set) |
| { |
| chainloader_edx = current_drive | ((current_partition >> 8) & 0xFF00); |
| chainloader_edx_set = 1; |
| } |
| if (! chainloader_ebx_set) |
| { |
| chainloader_ebx = 0; // clear BX for WinME |
| chainloader_ebx_set = 1; |
| } |
| |
| /* save partition number to the high word */ |
| chainloader_edx = (chainloader_edx & 0xFF00FFFF) | ((chainloader_edx & 0xFF00) << 8); |
| |
| // set media descriptor in DH for WinME |
| chainloader_edx = (chainloader_edx & 0xFFFF00FF) | 0xF000 | ((chainloader_edx & 0x80) << 4); |
| |
| grub_close (); |
| |
| /* FIXME: Where should the BPB be placed for MS-DOS's IO.SYS? |
| * In the current implementation it is placed at 0000:7C00 |
| * but has no effect, since the IO.SYS body will later |
| * overwrite 0000:7C00 on issuing the `boot' command. |
| */ |
| |
| if ((chainloader_edx & 0xFF0000) == 0xFF0000) /* check if partition number == 0xFF */ |
| grub_sprintf ((char *)SCRATCHADDR, "(%d)+1", (unsigned long)(unsigned char)chainloader_edx); |
| else |
| grub_sprintf ((char *)SCRATCHADDR, "(%d,%d)+1", (unsigned long)(unsigned char)chainloader_edx, (unsigned long)(unsigned char)(chainloader_edx >> 16)); |
| |
| if (! grub_open ((char *)SCRATCHADDR)) |
| goto failure; |
| |
| /* Read the boot sector of the partition onto 0000:7C00 */ |
| if (grub_read ((unsigned long long) SCRATCHADDR, 512, 0xedde0d90) != 512) |
| goto failure_exec_format; |
| |
| is_io = 1; |
| /* modify the hidden sectors */ |
| /* FIXME: Does the boot drive number also need modifying? */ |
| |
| if (*((unsigned long *) (SCRATCHADDR + BOOTSEC_BPB_HIDDEN_SECTORS))) |
| *((unsigned long *) (SCRATCHADDR + BOOTSEC_BPB_HIDDEN_SECTORS)) = (unsigned long)part_start; |
| if (debug > 0) |
| grub_printf("Will boot MS-DOS %c.x from drive=0x%x, partition=0x%x(hidden sectors=0x%lx)\n", |
| (unsigned long)(((*(unsigned short *) SCRATCHADDR) == 0x4D43)? '8' : '7'), |
| (unsigned long)current_drive, (unsigned long)(unsigned char)(current_partition >> 16), (unsigned long long)part_start); |
| } |
| } |
| else |
| if (((*(long *)SCRATCHADDR) & 0x00FF00FF) == 0x000100E9 && filemax > 0x30000 && |
| (*((unsigned short *) (SCRATCHADDR + BOOTSEC_SIG_OFFSET)) != BOOTSEC_SIGNATURE)) |
| { |
| if (chainloader_load_segment == -1) |
| chainloader_load_segment = 0x2000; |
| if (chainloader_load_offset == -1) |
| chainloader_load_offset = 0; |
| if (chainloader_load_length == -1) |
| chainloader_load_length = filemax; |
| if (! chainloader_edx_set) |
| { |
| chainloader_edx = current_drive | ((current_partition >> 8) & 0xFF00); |
| chainloader_edx_set = 1; |
| } |
| |
| grub_close (); |
| |
| if ((chainloader_edx & 0xFF00) == 0xFF00) |
| grub_sprintf ((char *)SCRATCHADDR, "(%d)+1", (unsigned long)(unsigned char)chainloader_edx); |
| else |
| grub_sprintf ((char *)SCRATCHADDR, "(%d,%d)+1", (unsigned long)(unsigned char)chainloader_edx, (unsigned long)(unsigned char)(chainloader_edx >> 8)); |
| |
| if (! grub_open ((char *)SCRATCHADDR)) |
| goto failure; |
| |
| /* Read the boot sector of the partition onto 0000:7C00 */ |
| if (grub_read ((unsigned long long) SCRATCHADDR, SECTOR_SIZE, 0xedde0d90) != SECTOR_SIZE) |
| goto failure_exec_format; |
| |
| /* modify the hidden sectors */ |
| /* FIXME: Does the boot drive number also need modifying? */ |
| |
| if (*((unsigned long *) (SCRATCHADDR + BOOTSEC_BPB_HIDDEN_SECTORS))) |
| *((unsigned long *) (SCRATCHADDR + BOOTSEC_BPB_HIDDEN_SECTORS)) = (unsigned long)part_start; |
| if (debug > 0) |
| grub_printf("Will boot NTLDR from drive=0x%x, partition=0x%x(hidden sectors=0x%lx)\n", current_drive, (unsigned long)(unsigned char)(current_partition >> 16), (unsigned long long)part_start); |
| } |
| else |
| if (filemax >= 0x4000 && (*(short *)SCRATCHADDR) == 0x3EEB && //(*(long *)(SCRATCHADDR + 0x40)) == 0x5B0000E8 && |
| (*((unsigned short *) (SCRATCHADDR + BOOTSEC_SIG_OFFSET)) != BOOTSEC_SIGNATURE)) |
| { |
| char tmp_buf[16]; |
| |
| filepos = 0x1FF8; /* grldr signature, pre_stage2, etc */ |
| |
| if (grub_read ((unsigned long long)(unsigned long)tmp_buf, 16, 0xedde0d90) != 16) |
| goto failure_exec_format; |
| |
| filepos = 0x200; |
| if (*(short *)tmp_buf < 0x40 || *(short *)tmp_buf > 0x1B8) |
| goto check_isolinux; |
| if (*(long *)(tmp_buf + 8) != 0x008270EA) |
| goto check_isolinux; |
| if (*(long *)(SCRATCHADDR + *(short *)tmp_buf) != *(long *)(tmp_buf + 4)) |
| goto check_isolinux; |
| if ((*(long long *)(void *)((int)*(short *)tmp_buf + (int)SCRATCHADDR - 5) & 0xFFFFFFFFFFLL) != 0xB8661FFCBBLL) |
| goto check_isolinux; |
| |
| // if (chainloader_load_segment == -1) |
| // chainloader_load_segment = 0x2000; |
| // if (chainloader_load_offset == -1) |
| // chainloader_load_offset = 0; |
| if (chainloader_load_length == -1) |
| chainloader_load_length = filemax; |
| if (! chainloader_edx_set) |
| { |
| chainloader_edx = current_drive | ((current_partition >> 8) & 0xFF00); |
| chainloader_edx_set = 1; |
| } |
| is_grldr = 1; |
| |
| grub_close (); |
| |
| if (debug > 0) |
| grub_printf("Will boot GRLDR from drive=0x%x, partition=0x%x(hidden sectors=0x%lx)\n", current_drive, (unsigned long)(unsigned char)(current_partition >> 16), (unsigned long long)part_start); |
| } |
| else |
| { |
| check_isolinux: |
| if (((*(long long *)SCRATCHADDR) & 0xFFFFFFFFFF00FFFFLL) == 0x909000007C00EAFALL && filemax > 0x2000 && filemax < 0x20000) |
| { |
| for (p = (char *)(SCRATCHADDR + 0x40); p < (char *)(SCRATCHADDR + 0x140); p++) |
| { |
| if (*(unsigned long *)p == 0xD08EC031 && |
| *(unsigned short *)(p - 10) == 0x892E && |
| *(unsigned short *)(p - 5) == 0x8C2E && |
| *(unsigned char *)(p + 4) == 0xBC && |
| *(unsigned char *)(p - 8) == 0x26 && |
| *(unsigned char *)(p - 3) == 0x16) |
| { |
| goto isolinux_ok; |
| } |
| } |
| goto check_signature; /* it is not isolinux. */ |
| isolinux_ok: |
| if (buf_geom.sector_size != 2048) |
| { |
| if (debug > 0) |
| printf ("\nCannot chainload ISOLINUX from a non-CDROM device.\n"); |
| goto failure_exec_format; |
| } |
| |
| chainloader_load_segment = 0; |
| chainloader_load_offset = 0x7c00; |
| chainloader_load_length = filemax; |
| chainloader_edx = current_drive; |
| chainloader_edx_set = 1; |
| |
| is_isolinux = 1; |
| } |
| else |
| { |
| check_signature: |
| /* If not loading it forcibly, check for the signature. */ |
| if (! force |
| && (*((unsigned short *) (SCRATCHADDR + BOOTSEC_SIG_OFFSET)) |
| != BOOTSEC_SIGNATURE)) |
| goto failure_exec_format; |
| } |
| } |
| |
| grub_close (); |
| |
| /* if BPB exists, we can reliablly modify the hidden sectors. */ |
| if (! probe_bpb((struct master_and_dos_boot_sector *)SCRATCHADDR)) |
| if (*((unsigned long *) (SCRATCHADDR + BOOTSEC_BPB_HIDDEN_SECTORS))) |
| *((unsigned long *) (SCRATCHADDR + BOOTSEC_BPB_HIDDEN_SECTORS)) |
| = (unsigned long)part_start; |
| |
| if (chainloader_load_length == -1) |
| chainloader_load_length = filemax; |
| if (chainloader_load_length > 0xA0000) |
| chainloader_load_length = 0xA0000; |
| |
| grub_memmove ((char *)0x7C00, (char *)SCRATCHADDR, 512); |
| errnum = ERR_NONE; |
| |
| return 1; |
| |
| failure_exec_format: |
| |
| grub_close (); |
| |
| if (errnum == ERR_NONE) |
| errnum = ERR_EXEC_FORMAT; |
| |
| failure: |
| |
| chainloader_load_segment = chainloader_load_segment_orig; |
| chainloader_load_offset = chainloader_load_offset_orig; |
| chainloader_load_length = chainloader_load_length_orig; |
| chainloader_skip_length = chainloader_skip_length_orig; |
| chainloader_boot_CS = chainloader_boot_CS_orig; |
| chainloader_boot_IP = chainloader_boot_IP_orig; |
| chainloader_ebx = chainloader_ebx_orig; |
| chainloader_ebx_set = chainloader_ebx_set_orig; |
| chainloader_edx = chainloader_edx_orig; |
| chainloader_edx_set = chainloader_edx_set_orig; |
| chainloader_disable_A20 = chainloader_disable_A20_orig; |
| is_sdi = is_sdi_orig; |
| is_raw = is_raw_orig; |
| is_isolinux = is_isolinux_orig; |
| is_grldr = is_grldr_orig; |
| is_io = is_io_orig; |
| kernel_type = kernel_type_orig; |
| force = errnum; /* backup the errnum */ |
| grub_memmove ((char *)chainloader_file, (char *)chainloader_file_orig, sizeof(chainloader_file)); |
| errnum = force; /* restore the errnum */ |
| return 0; /* return failure */ |
| |
| } |
| |
| static struct builtin builtin_chainloader = |
| { |
| "chainloader", |
| chainloader_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST | BUILTIN_BOOTING, |
| "chainloader [--force] [--load-segment=LS] [--load-offset=LO]" |
| "\n[--load-length=LL] [--skip-length=SL] [--boot-cs=CS] [--boot-ip=IP]" |
| "\n[--ebx=EBX] [--edx=EDX] [--sdi] [--disable-a20] FILE", |
| "Load the chain-loader FILE. If --force is specified, then load it" |
| " forcibly, whether the boot loader signature is present or not." |
| " LS:LO specifies the load address other than 0000:7C00. LL specifies" |
| " the length of the boot image(between 512 and 640K). CS:IP specifies" |
| " the address where the boot image will gain control. EBX/EDX specifies" |
| " the EBX/EDX register value when the boot image gets control. Use --sdi" |
| " if FILE is a System Deployment Image, which is of the Windows XP" |
| " RAM boot file format. Use --disable-a20 if you wish to turn off" |
| " A20 when transferring control to the boot image." |
| " SL specifies length in bytes at the beginning of the image to be" |
| " skipped when loading." |
| }; |
| |
| |
| /* This function could be used to debug new filesystem code. Put a file |
| in the new filesystem and the same file in a well-tested filesystem. |
| Then, run "cmp" with the files. If no output is obtained, probably |
| the code is good, otherwise investigate what's wrong... */ |
| /* cmp FILE1 FILE2 */ |
| static int |
| cmp_func (char *arg, int flags) |
| { |
| /* The filenames. */ |
| char *file1, *file2; |
| /* The addresses. */ |
| char *addr1, *addr2; |
| int i, Hex; |
| /* The size of the file. */ |
| unsigned long long size; |
| unsigned long long cur_pos = 0; |
| quit_print=0; |
| Hex = 0; |
| |
| for (;;) |
| { |
| if (grub_memcmp (arg, "--hex", 5) == 0) |
| { |
| Hex = 1; |
| arg=skip_to (0, arg); |
| } |
| else if (grub_memcmp (arg, "--skip=", 7) == 0) |
| { |
| arg += 7; |
| if (! safe_parse_maxint_with_suffix (&arg, &cur_pos, 0)) |
| return 0; |
| while (*arg == ' ' || *arg == '\t') arg++; |
| } |
| else |
| break; |
| } |
| /* Get the filenames from ARG. */ |
| file1 = arg; |
| file2 = skip_to (0, arg); |
| if (! *file1 || ! *file2) |
| { |
| errnum = ERR_BAD_ARGUMENT; |
| return 0; |
| } |
| |
| /* Terminate the filenames for convenience. */ |
| nul_terminate (file1); |
| nul_terminate (file2); |
| |
| /* Read the whole data from FILE1. */ |
| #define CMP_BUF_SIZE 0x100000ULL |
| addr1 = (char *) RAW_ADDR (0x600000); |
| addr2 = addr1 + CMP_BUF_SIZE; |
| if (! grub_open (file1)) |
| return 0; |
| |
| /* Get the size. */ |
| size = filemax; |
| grub_close(); |
| |
| if (! grub_open (file2)) |
| return 0; |
| grub_close(); |
| |
| if ((size != filemax) && !Hex) |
| { |
| grub_printf ("Differ in size: 0x%lx [%s], 0x%lx [%s]\n", size, file1, filemax, file2); |
| grub_close (); |
| return 0; |
| } |
| |
| if (Hex) |
| { |
| if (current_term->setcolorstate) |
| current_term->setcolorstate (COLOR_STATE_HEADING); |
| |
| grub_printf("Compare FILE1:%s <--> FILE2:%s\t\n",file1,file2); |
| |
| if (current_term->setcolorstate) |
| current_term->setcolorstate (COLOR_STATE_STANDARD); |
| } |
| |
| |
| if (! grub_open (file1)) |
| return 0; |
| |
| unsigned long long size1, size2; |
| |
| if (Hex) |
| filepos = cur_pos & -16ULL; |
| else |
| filepos = cur_pos; |
| |
| while ((size1 = grub_read ((unsigned long long)(unsigned long)addr1, CMP_BUF_SIZE, 0xedde0d90))) |
| { |
| cur_pos = filepos; |
| grub_close(); |
| if (! grub_open (file2)) |
| return 0; |
| |
| filepos = cur_pos - size1; |
| if (! (size2 = grub_read ((unsigned long long)(unsigned long)addr2, size1, 0xedde0d90))) |
| { |
| grub_close (); |
| return 0; |
| } |
| grub_close(); |
| |
| if (Hex) |
| { |
| for (i = 0; i < size2; i+=16) |
| { |
| int k,cnt; |
| unsigned char c; |
| unsigned long cur_offset; |
| cur_offset = (unsigned long)(cur_pos - size1 + i); |
| if (current_term->setcolorstate) |
| current_term->setcolorstate (COLOR_STATE_NORMAL); |
| grub_printf("0x%X\t0x%lX/0x%lX\n",cur_offset, size, filemax); |
| if (current_term->setcolorstate) |
| current_term->setcolorstate (COLOR_STATE_STANDARD); |
| grub_printf ("%08X: ",cur_offset); |
| cnt = 16; |
| if (cnt+i > size2) |
| cnt=size2 - i; |
| for (k=0;k<cnt;k++) |
| { |
| c = (unsigned char)(addr1[i+k]); |
| if ((addr1[i+k] != addr2[i+k]) && (current_term->setcolorstate)) |
| current_term->setcolorstate (COLOR_STATE_HIGHLIGHT); |
| printf("%02X", c); |
| if ((addr1[i+k] != addr2[i+k]) && (current_term->setcolorstate)) |
| current_term->setcolorstate (COLOR_STATE_STANDARD); |
| if ((k != 15) && ((k & 3)==3)) |
| printf(" "); |
| printf(" "); |
| } |
| for (;k<16;k++) |
| { |
| printf(" "); |
| if ((k!=15) && ((k & 3)==3)) |
| printf(" "); |
| } |
| printf("; "); |
| |
| for (k=0;k<cnt;k++) |
| { |
| c=(unsigned char)(addr1[i+k]); |
| printf("%c",((c>=32) && (c != 127))?c:'.'); |
| } |
| printf("\n"); |
| grub_printf ("%08X: ",cur_offset); |
| for (k=0;k<cnt;k++) |
| { |
| c = (unsigned char)(addr2[i+k]); |
| if ((addr1[i+k] != addr2[i+k]) && (current_term->setcolorstate)) |
| current_term->setcolorstate (COLOR_STATE_HIGHLIGHT); |
| printf("%02X", c); |
| if ((addr1[i+k] != addr2[i+k]) && (current_term->setcolorstate)) |
| current_term->setcolorstate (COLOR_STATE_STANDARD); |
| if ((k!=15) && ((k & 3)==3)) |
| printf(" "); |
| printf(" "); |
| } |
| |
| for (;k<16;k++) |
| { |
| printf(" "); |
| if ((k!=15) && ((k & 3)==3)) |
| printf(" "); |
| } |
| printf("; "); |
| |
| for (k=0;k<cnt;k++) |
| { |
| c = (unsigned char)(addr2[i+k]); |
| printf("%c",((c>=32) && (c != 127))?c:'.'); |
| } |
| printf("\n"); |
| if (quit_print) |
| return 1; |
| } |
| } |
| else |
| { |
| /* Now compare ADDR1 with ADDR2. */ |
| for (i = 0; i < size2; i++) |
| { |
| if (addr1[i] != addr2[i]) |
| { |
| grub_printf ("Differ at the offset %d: 0x%x [%s], 0x%x [%s]\n", |
| (unsigned long)(cur_pos - size1 + i), (unsigned long) addr1[i], file1, |
| (unsigned long) addr2[i], file2); |
| return 0; |
| } |
| } |
| } |
| |
| if (! grub_open (file1)) |
| return 0; |
| filepos = cur_pos; |
| } |
| grub_close(); |
| return 1; |
| } |
| |
| static struct builtin builtin_cmp = |
| { |
| "cmp", |
| cmp_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "cmp [--hex] FILE1 FILE2", |
| "Compare the file FILE1 with the FILE2 and inform the different values" |
| " if any." |
| }; |
| |
| |
| static char *color_list[16] = |
| { |
| "black", |
| "blue", |
| "green", |
| "cyan", |
| "red", |
| "magenta", |
| "brown", |
| "light-gray", |
| "dark-gray", |
| "light-blue", |
| "light-green", |
| "light-cyan", |
| "light-red", |
| "light-magenta", |
| "yellow", |
| "white" |
| }; |
| |
| static int color_number (char *str); |
| int blinking = 1; |
| |
| /* Convert the color name STR into the magical number. */ |
| static int |
| color_number (char *str) |
| { |
| char *ptr; |
| int i; |
| int color = 0; |
| int tmp_blinking = blinking; |
| |
| /* Find the separator. */ |
| for (ptr = str; *ptr && *ptr != '/'; ptr++) |
| ; |
| |
| /* If not found, return -1. */ |
| if (! *ptr) |
| return -1; |
| |
| /* Terminate the string STR. */ |
| *ptr++ = 0; |
| |
| /* If STR contains the prefix "blink-", then set the `blink' bit |
| in COLOR. */ |
| if (substring ("blink-", str, 0) <= 0) |
| { |
| if (tmp_blinking == 0) |
| return -1; |
| tmp_blinking = 0x80; |
| color = 0x80; |
| str += 6; |
| } |
| |
| /* Search for the color name. */ |
| for (i = 0; i < 16; i++) |
| if (grub_strcmp (color_list[i], str) == 0) |
| { |
| color |= i; |
| break; |
| } |
| |
| if (i == 16) |
| return -1; |
| |
| str = ptr; |
| nul_terminate (str); |
| |
| /* Search for the color name. */ |
| for (i = 0; i < 16; i++) |
| if (grub_strcmp (color_list[i], str) == 0) |
| { |
| if (i >= 8) |
| { |
| if (tmp_blinking == 0x80) |
| return -1; |
| tmp_blinking = 0; |
| } |
| color |= i << 4; |
| break; |
| } |
| |
| if (i == 16) |
| return -1; |
| |
| blinking = tmp_blinking; |
| return color; |
| } |
| |
| /* color */ |
| /* Set new colors used for the menu interface. Support two methods to |
| specify a color name: a direct integer representation and a symbolic |
| color name. An example of the latter is "blink-light-gray/blue". */ |
| static int |
| color_func (char *arg, int flags) |
| { |
| char *normal; |
| char *highlight; |
| char *helptext; |
| char *heading; |
| unsigned long long new_normal_color; |
| unsigned long long new_highlight_color; |
| unsigned long long new_helptext_color; |
| unsigned long long new_heading_color; |
| |
| blinking = 1; |
| normal = arg; |
| highlight = skip_to (0, arg); |
| helptext = skip_to (0, highlight); |
| heading = skip_to (0, helptext); |
| |
| new_normal_color = (unsigned long long)(long long)color_number (normal); |
| if ((long long)new_normal_color < 0 && ! safe_parse_maxint (&normal, &new_normal_color)) |
| return 0; |
| |
| if (new_normal_color & 0xFF00) /* disable blinking */ |
| blinking = 0; |
| new_helptext_color = new_normal_color; |
| new_heading_color = new_normal_color; |
| /* The second argument is optional, so set highlight_color |
| to inverted NORMAL_COLOR. */ |
| if (! *highlight) |
| new_highlight_color = (((new_normal_color >> 4) & 0xf) |
| | ((new_normal_color & 0xf) << 4)); |
| else |
| { |
| new_highlight_color = (unsigned long long)(long long)color_number (highlight); |
| if ((long long)new_highlight_color < 0 |
| && ! safe_parse_maxint (&highlight, &new_highlight_color)) |
| return 0; |
| if (new_highlight_color & 0xFF00) /* disable blinking */ |
| { |
| if (blinking == 0x80) |
| { |
| errnum = ERR_BAD_ARGUMENT; |
| return 0; |
| } |
| blinking = 0; |
| } |
| if (*helptext) |
| { |
| new_helptext_color = (unsigned long long)(long long)color_number (helptext); |
| if ((long long)new_helptext_color < 0 |
| && ! safe_parse_maxint (&helptext, &new_helptext_color)) |
| return 0; |
| if (new_helptext_color & 0xFF00) /* disable blinking */ |
| { |
| if (blinking == 0x80) |
| { |
| errnum = ERR_BAD_ARGUMENT; |
| return 0; |
| } |
| blinking = 0; |
| } |
| if (*heading) |
| { |
| new_heading_color = (unsigned long long)(long long)color_number (heading); |
| if ((long long)new_heading_color < 0 |
| && ! safe_parse_maxint (&heading, &new_heading_color)) |
| return 0; |
| if (new_heading_color & 0xFF00) /* disable blinking */ |
| { |
| if (blinking == 0x80) |
| { |
| errnum = ERR_BAD_ARGUMENT; |
| return 0; |
| } |
| blinking = 0; |
| } |
| } |
| } |
| } |
| |
| if (current_term->setcolor) |
| current_term->setcolor (new_normal_color, new_highlight_color, new_helptext_color, new_heading_color); |
| |
| return 1; |
| } |
| |
| static struct builtin builtin_color = |
| { |
| "color", |
| color_func, |
| BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_MENU | BUILTIN_HELP_LIST, |
| "color NORMAL [HIGHLIGHT [HELPTEXT [HEADING]]]", |
| "Change the menu colors. The color NORMAL is used for most" |
| " lines in the menu, and the color HIGHLIGHT is used to highlight the" |
| " line where the cursor points. If you omit HIGHLIGHT, then the" |
| " inverted color of NORMAL is used for the highlighted line. If you" |
| " omit HELPTEXT and/or HEADING, then NORMAL is used." |
| " The format of a color is \"FG/BG\". FG and BG are symbolic color names." |
| " A symbolic color name must be one of these: black, blue, green," |
| " cyan, red, magenta, brown, light-gray, dark-gray, light-blue," |
| " light-green, light-cyan, light-red, light-magenta, yellow and white." |
| " You can prefix \"blink-\" to FG if you want a blinking foreground color." |
| }; |
| |
| |
| /* configfile */ |
| static int |
| configfile_func (char *arg, int flags) |
| { |
| char *new_config = config_file; |
| |
| #ifndef GRUB_UTIL |
| if (*arg == 0 && *config_file && pxe_restart_config == 0) |
| { |
| if (configfile_in_menu_init == 0) |
| pxe_restart_config = configfile_in_menu_init = 1; |
| return 1; |
| } |
| #endif /* ! GRUB_UTIL */ |
| |
| if (grub_strlen(saved_dir) + grub_strlen(arg) + 20 >= sizeof(chainloader_file_orig)) |
| return ! (errnum = ERR_WONT_FIT); |
| |
| if (*arg == '/') |
| { |
| if (saved_partition != 0xFFFFFF) |
| { |
| if ((saved_partition & 0xFF00) == 0xFF00) |
| grub_sprintf (chainloader_file_orig, "(%d,%d)%s%s", saved_drive, (unsigned long)(unsigned char)(saved_partition>>16), saved_dir, arg); |
| else |
| if ((saved_partition & 0xFF0000) == 0xFF0000) |
| grub_sprintf (chainloader_file_orig, "(%d,%c)%s%s", saved_drive, (unsigned long)(unsigned char)((saved_partition>>8) + 'a'), saved_dir, arg); |
| else |
| grub_sprintf (chainloader_file_orig, "(%d,%d,%c)%s%s", saved_drive, (unsigned long)(unsigned char)(saved_partition>>16), (unsigned long)(unsigned char)((saved_partition>>8) + 'a'), saved_dir, arg); |
| } |
| else |
| grub_sprintf (chainloader_file_orig, "(%d)%s%s", saved_drive, saved_dir, arg); |
| } |
| else if (*arg == '(' && arg[1] == ')') |
| { |
| if (saved_partition != 0xFFFFFF) |
| { |
| if ((saved_partition & 0xFF00) == 0xFF00) |
| grub_sprintf (chainloader_file_orig, "(%d,%d)%s", saved_drive, (unsigned long)(unsigned char)(saved_partition>>16), (arg + 2)); |
| else |
| if ((saved_partition & 0xFF0000) == 0xFF0000) |
| grub_sprintf (chainloader_file_orig, "(%d,%c)%s", saved_drive, (unsigned long)(unsigned char)((saved_partition>>8) + 'a'), (arg + 2)); |
| else |
| grub_sprintf (chainloader_file_orig, "(%d,%d,%c)%s", saved_drive, (unsigned long)(unsigned char)(saved_partition>>16), (unsigned long)(unsigned char)((saved_partition>>8) + 'a'), (arg + 2)); |
| } |
| else |
| grub_sprintf (chainloader_file_orig, "(%d)%s", saved_drive, (arg + 2)); |
| } else if (*arg != '(') |
| { |
| if (saved_partition != 0xFFFFFF) |
| { |
| if ((saved_partition & 0xFF00) == 0xFF00) |
| grub_sprintf (chainloader_file_orig, "(%d,%d)%s", saved_drive, (unsigned long)(unsigned char)(saved_partition>>16), arg); |
| else |
| if ((saved_partition & 0xFF0000) == 0xFF0000) |
| grub_sprintf (chainloader_file_orig, "(%d,%c)%s", saved_drive, (unsigned long)(unsigned char)((saved_partition>>8) + 'a'), arg); |
| else |
| grub_sprintf (chainloader_file_orig, "(%d,%d,%c)%s", saved_drive, (unsigned long)(unsigned char)(saved_partition>>16), (unsigned long)(unsigned char)((saved_partition>>8) + 'a'), arg); |
| } |
| else |
| grub_sprintf (chainloader_file_orig, "(%d)%s", saved_drive, arg); |
| } |
| else |
| grub_memmove (chainloader_file_orig, arg, sizeof(chainloader_file_orig)); |
| //chainloader_file_orig[sizeof(chainloader_file_orig) - 1] = 0; |
| |
| arg = chainloader_file_orig; |
| |
| nul_terminate (arg); |
| |
| /* check possible filename overflow */ |
| #ifdef GRUB_UTIL |
| if (grub_strlen (arg) >= 0x70 /*sizeof (config_file)*/) |
| return ! (errnum = ERR_WONT_FIT); |
| #else |
| if (grub_strlen (arg) >= ((char *)0x8270 - new_config)) |
| return ! (errnum = ERR_WONT_FIT); |
| #endif |
| |
| /* Check if the file ARG is present. */ |
| if (! grub_open (arg)) |
| return 0; |
| |
| #ifndef GRUB_UTIL |
| if (current_drive == cdrom_drive) |
| configfile_opened = 1; |
| else |
| #endif /* ! GRUB_UTIL */ |
| grub_close (); |
| |
| //#ifndef GRUB_UTIL |
| // if (pxe_restart_config == 0) |
| // { |
| // if (configfile_in_menu_init) |
| // return 1; |
| // } |
| //#endif /* ! GRUB_UTIL */ |
| |
| /* Copy ARG to CONFIG_FILE. */ |
| while ((*new_config++ = *arg++) != 0) |
| ; |
| |
| //#ifdef GRUB_UTIL |
| /* Force to load the configuration file. */ |
| use_config_file = 1; |
| //#endif |
| |
| #ifndef GRUB_UTIL |
| if (pxe_restart_config == 0) |
| { |
| pxe_restart_config = /* configfile_in_menu_init = */ 1; |
| return 1; |
| } |
| #endif /* ! GRUB_UTIL */ |
| |
| /* Make sure that the user will not be authoritative. */ |
| auth = 0; |
| |
| saved_entryno = 0; |
| //force_cdrom_as_boot_device = 0; |
| boot_drive = (current_drive == 0xFFFF ? saved_drive : current_drive); |
| install_partition = (current_drive == 0xFFFF ? saved_partition : current_partition); |
| #ifdef GRUB_UTIL |
| buf_drive = -1; /* invalidate disk cache. */ |
| buf_track = -1; /* invalidate disk cache. */ |
| current_drive = GRUB_INVALID_DRIVE; |
| current_partition = 0xFFFFFF; |
| fsys_type = NUM_FSYS; |
| boot_part_addr = 0; |
| current_slice = 0; |
| /* Restart cmain. */ |
| grub_longjmp (restart_env, 0); |
| #else |
| ///* Restart pre_stage2. */ |
| //(*(char *)0x8205) |= 2; /* disable keyboard intervention */ |
| //chain_stage1(0, 0x8200, boot_part_addr); |
| /* Restart cmain. */ |
| asm volatile ("movl $0x7000, %esp"); /* set stack to STACKOFF */ |
| #ifdef HAVE_ASM_USCORE |
| asm volatile ("call _cmain"); |
| asm volatile ("jmp _stop"); |
| #else |
| asm volatile ("call cmain"); |
| asm volatile ("jmp stop"); |
| #endif |
| #endif /* ! GRUB_UTIL */ |
| |
| /* Never reach here. */ |
| return 1; |
| } |
| |
| static struct builtin builtin_configfile = |
| { |
| "configfile", |
| configfile_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST | BUILTIN_BOOTING, |
| "configfile FILE", |
| "Load FILE as the configuration file." |
| }; |
| |
| |
| #ifndef GRUB_UTIL |
| /* dd if=IF of=OF */ |
| static int |
| dd_func (char *arg, int flags) |
| { |
| char *p; |
| char *in_file = NULL, *out_file = NULL; |
| unsigned long long bs = 0; |
| unsigned long long count = 0; |
| unsigned long long skip = 0; |
| unsigned long long seek = 0; |
| unsigned long long old_part_start = part_start; |
| unsigned long long old_part_length = part_length; |
| // int in_fsys_type; |
| unsigned long in_drive; |
| unsigned long in_partition; |
| // int out_fsys_type; |
| unsigned long out_drive; |
| unsigned long out_partition; |
| unsigned long long in_filepos; |
| unsigned long long in_filemax; |
| unsigned long long out_filepos; |
| unsigned long long out_filemax; |
| unsigned long long buf_addr = 0x20000ULL; |
| unsigned long long buf_size = 0x10000ULL; |
| char tmp_in_file[16]; |
| char tmp_out_file[16]; |
| |
| for (;;) |
| { |
| if (grub_memcmp (arg, "if=", 3) == 0) |
| { |
| if (in_file) |
| return !(errnum = ERR_BAD_ARGUMENT); |
| in_file = arg + 3; |
| if (/* *in_file != '/' &&*/ *in_file != '(') |
| return !(errnum = ERR_DEV_FORMAT); |
| } |
| else if (grub_memcmp (arg, "of=", 3) == 0) |
| { |
| if (out_file) |
| return !(errnum = ERR_BAD_ARGUMENT); |
| out_file = arg + 3; |
| if (/* *out_file != '/' &&*/ *out_file != '(') |
| return !(errnum = ERR_DEV_FORMAT); |
| } |
| else if (grub_memcmp (arg, "bs=", 3) == 0) |
| { |
| if (bs) |
| return !(errnum = ERR_BAD_ARGUMENT); |
| p = arg + 3; |
| if (*p == '-') |
| return !(errnum = ERR_BAD_ARGUMENT); |
| if (! safe_parse_maxint (&p, &bs)) |
| return 0; |
| if (bs == 0 /*|| 0x100000 % bs*/) |
| return !(errnum = ERR_BAD_ARGUMENT); |
| } |
| else if (grub_memcmp (arg, "count=", 6) == 0) |
| { |
| if (count) |
| return !(errnum = ERR_BAD_ARGUMENT); |
| p = arg + 6; |
| if (*p == '-') |
| return !(errnum = ERR_BAD_ARGUMENT); |
| if (! safe_parse_maxint (&p, &count)) |
| return 0; |
| if (count == 0) |
| return !(errnum = ERR_BAD_ARGUMENT); |
| } |
| else if (grub_memcmp (arg, "skip=", 5) == 0) |
| { |
| if (skip) |
| return !(errnum = ERR_BAD_ARGUMENT); |
| p = arg + 5; |
| if (*p == '-') |
| return !(errnum = ERR_BAD_ARGUMENT); |
| if (! safe_parse_maxint (&p, &skip)) |
| return 0; |
| } |
| else if (grub_memcmp (arg, "seek=", 5) == 0) |
| { |
| if (seek) |
| return !(errnum = ERR_BAD_ARGUMENT); |
| p = arg + 5; |
| if (*p == '-') |
| return !(errnum = ERR_BAD_ARGUMENT); |
| if (! safe_parse_maxint (&p, &seek)) |
| return 0; |
| } |
| else if (grub_memcmp (arg, "buf=", 4) == 0) |
| { |
| if (buf_addr >= 0x100000) /* already at above 1M, so it is set previously. */ |
| return !(errnum = ERR_BAD_ARGUMENT); |
| p = arg + 4; |
| if (*p == '-') /* negative */ |
| return !(errnum = ERR_BAD_ARGUMENT); |
| if (! safe_parse_maxint (&p, &buf_addr)) |
| return 0; |
| if (buf_addr < 0x100000) /* cannot set buffer at below 1M */ |
| return !(errnum = ERR_BAD_ARGUMENT); |
| } |
| else if (grub_memcmp (arg, "buflen=", 7) == 0) |
| { |
| if (buf_size > 0x10000) /* already above 640K, so it is set previously. */ |
| return !(errnum = ERR_BAD_ARGUMENT); |
| p = arg + 7; |
| if (*p == '-') /* negative */ |
| return !(errnum = ERR_BAD_ARGUMENT); |
| if (! safe_parse_maxint (&p, &buf_size)) |
| return 0; |
| if (buf_size <= 0x10000 || buf_size > 0xFFFFFFFF) /* cannot set buffer size below 640K */ |
| return !(errnum = ERR_BAD_ARGUMENT); |
| } |
| else if (*arg) |
| return !(errnum = ERR_BAD_ARGUMENT); |
| else |
| break; |
| arg = skip_to (0, arg); |
| } |
| |
| if (! in_file || ! out_file) |
| return !(errnum = ERR_BAD_ARGUMENT); |
| if (bs == 0) |
| bs = 512; |
| |
| // if (*in_file == '/') |
| // { |
| // in_drive = saved_drive; |
| // in_partition = saved_partition; |
| // in_file--; |
| // *in_file = ')'; |
| // in_file--; |
| // *in_file = '('; |
| // if (! grub_open (in_file)) |
| // goto fail; |
| // in_filemax = filemax; |
| // grub_close (); |
| // } |
| // else |
| { |
| p = set_device (in_file); |
| if (errnum) |
| goto fail; |
| if (! p) |
| { |
| if (errnum == 0) |
| errnum = ERR_BAD_ARGUMENT; |
| goto fail; |
| } |
| in_drive = current_drive; |
| in_partition = current_partition; |
| /* if only the device portion is specified */ |
| if ((unsigned char)*p <= ' ') |
| { |
| in_file = p = tmp_in_file; |
| *p++ = '('; |
| *p++ = ')'; |
| *p++ = '+'; |
| *p++ = '1'; |
| *p = 0; |
| current_drive = saved_drive; |
| current_partition = saved_partition; |
| saved_drive = in_drive; |
| saved_partition = in_partition; |
| in_drive = current_drive; |
| in_partition = current_partition; |
| grub_open (in_file); |
| current_drive = saved_drive; |
| current_partition = saved_partition; |
| saved_drive = in_drive; |
| saved_partition = in_partition; |
| in_drive = current_drive; |
| in_partition = current_partition; |
| if (errnum) |
| goto fail; |
| in_filemax = (unsigned long long)(buf_geom.sector_size) * part_length; |
| grub_sprintf (in_file + 3, "0x%lx", (unsigned long long)part_length); |
| grub_close (); |
| } |
| else |
| { |
| //in_file--; |
| //*in_file = ')'; |
| //in_file--; |
| //*in_file = '('; |
| //current_drive = saved_drive; |
| //current_partition = saved_partition; |
| //saved_drive = in_drive; |
| //saved_partition = in_partition; |
| //in_drive = current_drive; |
| //in_partition = current_partition; |
| grub_open (in_file); |
| //current_drive = saved_drive; |
| //current_partition = saved_partition; |
| //saved_drive = in_drive; |
| //saved_partition = in_partition; |
| //in_drive = current_drive; |
| //in_partition = current_partition; |
| in_filemax = filemax; |
| if (errnum) |
| goto fail; |
| grub_close (); |
| } |
| } |
| // in_fsys_type = fsys_type; |
| |
| // if (*out_file == '/') |
| // { |
| // out_drive = saved_drive; |
| // out_partition = saved_partition; |
| // out_file--; |
| // *out_file = ')'; |
| // out_file--; |
| // *out_file = '('; |
| // if (! grub_open (out_file)) |
| // goto fail; |
| // out_filemax = filemax; |
| // grub_close (); |
| // } |
| // else |
| { |
| p = set_device (out_file); |
| if (errnum) |
| goto fail; |
| if (! p) |
| { |
| if (errnum == 0) |
| errnum = ERR_BAD_ARGUMENT; |
| goto fail; |
| } |
| out_drive = current_drive; |
| out_partition = current_partition; |
| /* if only the device portion is specified */ |
| if ((unsigned char)*p <= ' ') |
| { |
| out_file = p = tmp_out_file; |
| *p++ = '('; |
| *p++ = ')'; |
| *p++ = '+'; |
| *p++ = '1'; |
| *p = 0; |
| current_drive = saved_drive; |
| current_partition = saved_partition; |
| saved_drive = out_drive; |
| saved_partition = out_partition; |
| out_drive = current_drive; |
| out_partition = current_partition; |
| grub_open (out_file); |
| current_drive = saved_drive; |
| current_partition = saved_partition; |
| saved_drive = out_drive; |
| saved_partition = out_partition; |
| out_drive = current_drive; |
| out_partition = current_partition; |
| if (errnum) |
| goto fail; |
| out_filemax = (unsigned long long)(buf_geom.sector_size) * part_length; |
| grub_sprintf (out_file + 3, "0x%lx", (unsigned long long)part_length); |
| grub_close (); |
| } |
| else |
| { |
| //out_file--; |
| //*out_file = ')'; |
| //out_file--; |
| //*out_file = '('; |
| //current_drive = saved_drive; |
| //current_partition = saved_partition; |
| //saved_drive = out_drive; |
| //saved_partition = out_partition; |
| //out_drive = current_drive; |
| //out_partition = current_partition; |
| grub_open (out_file); |
| //current_drive = saved_drive; |
| //current_partition = saved_partition; |
| //saved_drive = out_drive; |
| //saved_partition = out_partition; |
| //out_drive = current_drive; |
| //out_partition = current_partition; |
| out_filemax = filemax; |
| if (errnum) |
| goto fail; |
| grub_close (); |
| } |
| } |
| // out_fsys_type = fsys_type; |
| |
| /* calculate in_filepos and out_filepos */ |
| in_filepos = skip * bs; |
| out_filepos = seek * bs; |
| if (count) |
| { |
| if (in_filemax > ((count + skip) * bs)) |
| in_filemax = ((count + skip) * bs); |
| if (out_filemax > ((count + seek) * bs)) |
| out_filemax = ((count + seek) * bs); |
| } |
| |
| if (in_drive == 0xFFFF && in_file == tmp_in_file && /* in_file is (md) */ |
| out_drive == 0xFFFF && out_file == tmp_out_file) /* out_file is (md) */ |
| { |
| unsigned long long tmp_part_start = part_start; |
| unsigned long long tmp_part_length = part_length; |
| |
| count = in_filemax - in_filepos; |
| if (count > out_filemax - out_filepos) |
| count = out_filemax - out_filepos; |
| |
| part_start = old_part_start; |
| part_length = old_part_length; |
| grub_memmove64 (out_filepos, in_filepos, count); |
| part_start = tmp_part_start; |
| part_length = tmp_part_length; |
| if (debug > 0) |
| { |
| grub_printf ("\nMoved 0x%lX bytes from 0x%lX to 0x%lX\n", (unsigned long long)count, (unsigned long long)in_filepos, (unsigned long long)out_filepos); |
| } |
| errnum = 0; |
| return count; |
| } |
| |
| /* (*p == '/') indicates out_file is not a block file */ |
| /* (*p != '/') indicates out_file is a block file */ |
| |
| #if 0 |
| if (out_drive != ram_drive && out_drive != 0xFFFF && *p != '/') |
| { |
| unsigned long j; |
| |
| /* check if it is a mapped memdrive */ |
| j = DRIVE_MAP_SIZE; /* real drive */ |
| #ifndef GRUB_UTIL |
| if (! unset_int13_handler (1)) /* map is hooked */ |
| for (j = 0; j < DRIVE_MAP_SIZE; j++) |
| { |
| if (drive_map_slot_empty (hooked_drive_map[j])) |
| { |
| j = DRIVE_MAP_SIZE; /* real drive */ |
| break; |
| } |
| |
| if (out_drive == hooked_drive_map[j].from_drive && hooked_drive_map[j].to_drive == 0xFF && !(hooked_drive_map[j].to_cylinder & 0x4000)) |
| break; /* memdrive */ |
| } |
| #endif /* ! GRUB_UTIL */ |
| |
| if (j == DRIVE_MAP_SIZE) /* real drive */ |
| { |
| /* this command is intended for running in command line and inhibited from running in menu.lst */ |
| if (flags & (BUILTIN_MENU | BUILTIN_SCRIPT)) |
| { |
| errnum = ERR_WRITE_TO_NON_MEM_DRIVE; |
| goto fail; |
| } |
| } |
| } |
| #endif |
| |
| { |
| unsigned long long in_pos = in_filepos; |
| unsigned long long out_pos = out_filepos; |
| unsigned long long tmp_size = buf_size; |
| |
| if (debug > 0) |
| { |
| count = in_filemax - in_filepos; |
| if (count > out_filemax - out_pos) |
| count = out_filemax - out_pos; |
| count = ((unsigned long)(count + buf_size - 1) / (unsigned long)buf_size); |
| grub_printf ("buf_size=0x%lX, loops=0x%lX. in_pos=0x%lX, out_pos=0x%lX\n", (unsigned long long)buf_size, (unsigned long long)count, (unsigned long long)in_pos, (unsigned long long)out_pos); |
| } |
| count = 0; |
| while (in_pos < in_filemax && out_pos < out_filemax) |
| { |
| if (debug > 0) |
| { |
| if (!((char)count & 7)) |
| grub_printf ("\r"); |
| grub_printf ("%08X ", (unsigned long)(count)); |
| } |
| /* open in_file */ |
| current_drive = saved_drive; |
| current_partition = saved_partition; |
| saved_drive = in_drive; |
| saved_partition = in_partition; |
| in_drive = current_drive; |
| in_partition = current_partition; |
| current_drive = saved_drive; |
| current_partition = saved_partition; |
| // fsys_type = in_fsys_type; |
| if (grub_open (in_file)) |
| { |
| filepos = in_pos; |
| //tmp_size = buf_size; |
| if (tmp_size > in_filemax - in_pos) |
| tmp_size = in_filemax - in_pos; |
| if (grub_read (buf_addr, tmp_size, 0xedde0d90) != tmp_size) /* read */ |
| { |
| if (errnum == 0) |
| errnum = ERR_READ; |
| } |
| { |
| int err = errnum; |
| grub_close (); |
| errnum = err; |
| } |
| } |
| current_drive = saved_drive; |
| current_partition = saved_partition; |
| saved_drive = in_drive; |
| saved_partition = in_partition; |
| in_drive = current_drive; |
| in_partition = current_partition; |
| if (errnum) |
| goto end; |
| |
| in_pos += tmp_size; |
| |
| /* open out_file */ |
| current_drive = saved_drive; |
| current_partition = saved_partition; |
| saved_drive = out_drive; |
| saved_partition = out_partition; |
| out_drive = current_drive; |
| out_partition = current_partition; |
| current_drive = saved_drive; |
| current_partition = saved_partition; |
| // fsys_type = out_fsys_type; |
| if (grub_open (out_file)) |
| { |
| filepos = out_pos; |
| if (tmp_size > out_filemax - out_pos) |
| tmp_size = out_filemax - out_pos; |
| if (grub_read (buf_addr, tmp_size, 0x900ddeed) != tmp_size) /* write */ |
| { |
| if (errnum == 0) |
| errnum = ERR_WRITE; |
| } |
| { |
| int err = errnum; |
| grub_close (); |
| errnum = err; |
| } |
| } |
| current_drive = saved_drive; |
| current_partition = saved_partition; |
| saved_drive = out_drive; |
| saved_partition = out_partition; |
| out_drive = current_drive; |
| out_partition = current_partition; |
| if (errnum) |
| goto end; |
| |
| out_pos += tmp_size; |
| count++; |
| } |
| |
| end: |
| |
| in_pos -= in_filepos; |
| out_pos -= out_filepos; |
| |
| if (debug > 0) |
| { |
| int err = errnum; |
| grub_printf ("\nBytes read / written = 0x%lX / 0x%lX\n", (unsigned long long)in_pos, (unsigned long long)out_pos); |
| errnum = err; |
| } |
| } |
| |
| fail: |
| |
| // if (*(long *)(in_file - 1) == 0x2F292869) /* i()/ */ |
| // *(unsigned short *)in_file = 0x3D66; /* f= */ |
| // if (*(long *)(out_file - 1) == 0x2F29286F) /* o()/ */ |
| // *(unsigned short *)out_file = 0x3D66; /* f= */ |
| |
| return !(errnum); |
| } |
| |
| static struct builtin builtin_dd = |
| { |
| "dd", |
| dd_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "dd if=IF of=OF [bs=BS] [count=C] [skip=IN] [seek=OUT] [buf=ADDR] [buflen=SIZE]", |
| "Copy file IF to OF. BS is blocksize, default to 512. C is blocks to copy," |
| " default is total blocks in IF. IN specifies number of blocks to skip when" |
| " read, default is 0. OUT specifies number of blocks to skip when write," |
| " default is 0. Skipped blocks are not touched. Both IF and OF must exist." |
| " dd can neither enlarge nor reduce the size of OF, the leftover tail" |
| " of IF will be discarded. OF cannot be a gzipped file. If IF is a gzipped" |
| " file, it will be decompressed automatically when copying. dd is dangerous," |
| " use at your own risk. To be on the safe side, you should only use dd to" |
| " write a file in memory. ADDR and SIZE are used for user-defined buffer." |
| }; |
| |
| |
| #endif /* ! GRUB_UTIL */ |
| /* debug */ |
| static int |
| debug_func (char *arg, int flags) |
| { |
| unsigned long long tmp_debug; |
| |
| if (! *arg) |
| { |
| ///* If ARG is empty, toggle the flag. */ |
| //debug = ! debug; |
| } |
| else if (grub_memcmp (arg, "on", 2) == 0) |
| debug = 2; |
| else if (grub_memcmp (arg, "normal", 6) == 0) |
| debug = 1; |
| else if (grub_memcmp (arg, "off", 3) == 0) |
| debug = 0; |
| else if (grub_memcmp (arg, "status", 6) == 0) |
| grub_printf (" Debug is now %d\n", (unsigned long)debug); |
| else if (safe_parse_maxint (&arg, &tmp_debug)) |
| debug = tmp_debug; |
| else |
| { |
| if (errnum == 0) |
| errnum = ERR_BAD_ARGUMENT; |
| return 0; |
| } |
| |
| return debug; |
| } |
| |
| static struct builtin builtin_debug = |
| { |
| "debug", |
| debug_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "debug [on | off | normal | status | INTEGER]", |
| "Turn on/off or display/set the debug level." |
| }; |
| |
| |
| /* default */ |
| static int |
| default_func (char *arg, int flags) |
| { |
| unsigned long long ull; |
| int len; |
| char *p; |
| #if defined(STAGE1_5) || defined(GRUB_UTIL) |
| // char mbr[SECTOR_SIZE]; |
| #endif |
| char *default_file = (char *) DEFAULT_FILE_BUF; |
| |
| #ifndef SUPPORT_DISKLESS |
| if (grub_memcmp (arg, "saved", 5) == 0) |
| { |
| default_entry = saved_entryno; |
| return 1; |
| } |
| #endif /* SUPPORT_DISKLESS */ |
| |
| if (safe_parse_maxint (&arg, &ull)) |
| { |
| default_entry = ull; |
| return 1; |
| } |
| |
| errnum = ERR_NONE; |
| |
| //printf("default_func open %s\n", arg); |
| /* Open the file. */ |
| if (! grub_open (arg)) |
| return ! errnum; |
| |
| if (compressed_file) |
| { |
| grub_close (); |
| return ! (errnum = ERR_DEFAULT_FILE); |
| } |
| |
| len = grub_read ((unsigned long long)(unsigned long)mbr, SECTOR_SIZE, 0xedde0d90); |
| grub_close (); |
| |
| //printf("default_func errnum=%d\n", errnum); |
| |
| if (len < 180 || filemax > 2048) |
| return ! (errnum = ERR_DEFAULT_FILE); |
| |
| //printf("default_func errnum=%d\n", errnum); |
| /* check file content for safety */ |
| p = mbr; |
| while (p < mbr + len - 100 && grub_memcmp (++p, warning_defaultfile, 73)); |
| |
| //printf("default_func errnum=%d\n", errnum); |
| //grub_printf ("p=%x, mbr=%x, len=%x, mbr + len - 160 = %x\n", p, mbr, len, mbr + len - 160); |
| if (p > mbr + len - 160) |
| return ! (errnum = ERR_DEFAULT_FILE); |
| |
| //printf("default_func errnum=%d\n", errnum); |
| len = grub_strlen (arg); |
| if (len >= DEFAULT_FILE_BUFLEN) |
| return ! (errnum = ERR_WONT_FIT); |
| |
| //printf("default_func errnum=%d\n", errnum); |
| grub_memmove (default_file, arg, len); |
| default_file[len] = 0; |
| boot_drive = current_drive; |
| install_partition = current_partition; |
| |
| p = mbr; |
| if (safe_parse_maxint (&p, &ull)) |
| { |
| default_entry = ull; |
| return 1; |
| } |
| |
| //printf("default_func errnum=%d\n", errnum); |
| errnum = 0; /* ignore error */ |
| return errnum; /* return false */ |
| } |
| |
| static struct builtin builtin_default = |
| { |
| "default", |
| default_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "default [NUM | `saved' | FILE]", |
| "Set the default entry to entry number NUM (if not specified, it is" |
| " 0, the first entry), or to the entry number saved by savedefault if" |
| " the key word `saved\' is specified, or to the entry number previously" |
| " saved in the specified file FILE. When FILE is specified, all subsequent" |
| " `savedefault\' commands will save default entry numbers into" |
| " FILE." |
| #if 0 |
| "default [NUM | `saved']", |
| "Set the default entry to entry number NUM (if not specified, it is" |
| " 0, the first entry) or the entry number saved by savedefault." |
| #endif |
| }; |
| |
| |
| #ifdef GRUB_UTIL |
| /* device */ |
| static int |
| device_func (char *arg, int flags) |
| { |
| char *drive = arg; |
| char *device; |
| |
| /* Get the drive number from DRIVE. */ |
| if (! set_device (drive)) |
| return 0; |
| |
| /* Get the device argument. */ |
| device = skip_to (0, drive); |
| |
| /* Terminate DEVICE. */ |
| nul_terminate (device); |
| |
| if (! *device || ! check_device (device)) |
| { |
| errnum = ERR_FILE_NOT_FOUND; |
| return 0; |
| } |
| |
| assign_device_name (current_drive, device); |
| |
| return 1; |
| } |
| |
| static struct builtin builtin_device = |
| { |
| "device", |
| device_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "device DRIVE DEVICE", |
| "Specify DEVICE as the actual drive for a BIOS drive DRIVE. This command" |
| " can be used only in the grub shell." |
| }; |
| #endif /* GRUB_UTIL */ |
| |
| |
| #ifdef SUPPORT_NETBOOT |
| /* dhcp */ |
| static int |
| dhcp_func (char *arg, int flags) |
| { |
| /* For now, this is an alias for bootp. */ |
| return bootp_func (arg, flags); |
| } |
| |
| static struct builtin builtin_dhcp = |
| { |
| "dhcp", |
| dhcp_func, |
| BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_MENU | BUILTIN_HELP_LIST, |
| "dhcp", |
| "Initialize a network device via DHCP." |
| }; |
| #endif /* SUPPORT_NETBOOT */ |
| |
| |
| static int terminal_func (char *arg, int flags); |
| |
| #ifdef SUPPORT_GRAPHICS |
| extern char splashimage[64]; |
| |
| static int |
| splashimage_func(char *arg, int flags) |
| { |
| //char splashimage[64]; |
| int i; |
| |
| /* If ARG is empty, we reset SPLASHIMAGE. */ |
| if (*arg) |
| { |
| /* filename can only be 64 characters due to our buffer size */ |
| if (strlen(arg) > 63) |
| return ! (errnum = ERR_WONT_FIT); |
| |
| // if (flags == BUILTIN_CMDLINE) { |
| if (! grub_open(arg)) |
| return 0; |
| grub_close(); |
| // } |
| } |
| |
| strcpy(splashimage, arg); |
| |
| /* get rid of TERM_NEED_INIT from the graphics terminal. */ |
| for (i = 0; term_table[i].name; i++) { |
| if (grub_strcmp (term_table[i].name, "graphics") == 0) { |
| term_table[i].flags &= ~TERM_NEED_INIT; |
| break; |
| } |
| } |
| |
| //graphics_set_splash (splashimage); |
| |
| if (/* flags == BUILTIN_CMDLINE && */ graphics_inited) { |
| graphics_end(); |
| if (! graphics_init()) |
| return ! (errnum = ERR_EXEC_FORMAT); |
| graphics_cls(); |
| } |
| |
| /* FIXME: should we be explicitly switching the terminal as a |
| * side effect here? */ |
| terminal_func("graphics", flags); |
| |
| return 1; |
| } |
| |
| static struct builtin builtin_splashimage = |
| { |
| "splashimage", |
| splashimage_func, |
| BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_MENU | BUILTIN_HELP_LIST, |
| "splashimage FILE", |
| "Load FILE as the background image when in graphics mode." |
| }; |
| |
| |
| /* foreground */ |
| static int |
| foreground_func(char *arg, int flags) |
| { |
| if (grub_strlen(arg) == 6) { |
| int r = ((hex(arg[0]) << 4) | hex(arg[1])) >> 2; |
| int g = ((hex(arg[2]) << 4) | hex(arg[3])) >> 2; |
| int b = ((hex(arg[4]) << 4) | hex(arg[5])) >> 2; |
| |
| foreground = (r << 16) | (g << 8) | b; |
| if (graphics_inited) |
| graphics_set_palette(15, r, g, b); |
| |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| static struct builtin builtin_foreground = |
| { |
| "foreground", |
| foreground_func, |
| BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_MENU | BUILTIN_HELP_LIST, |
| "foreground RRGGBB", |
| "Sets the foreground color when in graphics mode." |
| "RR is red, GG is green, and BB blue. Numbers must be in hexadecimal." |
| }; |
| |
| |
| /* background */ |
| static int |
| background_func(char *arg, int flags) |
| { |
| if (grub_strlen(arg) == 6) { |
| int r = ((hex(arg[0]) << 4) | hex(arg[1])) >> 2; |
| int g = ((hex(arg[2]) << 4) | hex(arg[3])) >> 2; |
| int b = ((hex(arg[4]) << 4) | hex(arg[5])) >> 2; |
| |
| background = (r << 16) | (g << 8) | b; |
| if (graphics_inited) |
| graphics_set_palette(0, r, g, b); |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| static struct builtin builtin_background = |
| { |
| "background", |
| background_func, |
| BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_MENU | BUILTIN_HELP_LIST, |
| "background RRGGBB", |
| "Sets the background color when in graphics mode." |
| "RR is red, GG is green, and BB blue. Numbers must be in hexadecimal." |
| }; |
| |
| #endif /* SUPPORT_GRAPHICS */ |
| |
| static int |
| in_range (char *range, unsigned long long val) |
| { |
| unsigned long long start_num; |
| unsigned long long end_num; |
| |
| for (;;) |
| { |
| if (! safe_parse_maxint (&range, &start_num)) |
| break; |
| if (val == start_num) |
| return 1; |
| if (*range == ',') |
| { |
| range++; |
| continue; |
| } |
| if (*range != ':') |
| break; |
| |
| range++; |
| if (! safe_parse_maxint (&range, &end_num)) |
| break; |
| if ((long long)val > (long long)start_num && (long long)val <= (long long)end_num) |
| return 1; |
| if (val > start_num && val <= end_num) |
| return 1; |
| if (*range != ',') |
| break; |
| |
| range++; |
| } |
| |
| errnum = 0; |
| return 0; |
| } |
| |
| /* checkrange */ |
| int |
| checkrange_func(char *arg, int flags) |
| { |
| struct builtin *builtin1; |
| unsigned long long ret; |
| char *arg1; |
| |
| arg1 = skip_to (0, arg); /* the command */ |
| |
| builtin1 = find_command (arg1); |
| |
| if ((int)builtin1 != -1) |
| if (! builtin1 || ! (builtin1->flags & flags)) |
| { |
| errnum = ERR_UNRECOGNIZED; |
| return 0; |
| } |
| |
| if ((int)builtin1 == -1 || ((builtin1->func) != errnum_func && (builtin1->func) != checkrange_func)) |
| errnum = 0; |
| |
| if ((int)builtin1 != -1) |
| ret = (builtin1->func) (skip_to (1, arg1), flags); |
| else |
| ret = command_func (arg1, flags); |
| |
| if ((int)builtin1 != -1) |
| if ((builtin1->func) == errnum_func /*|| (builtin1->func) == checkrange_func*/) |
| errnum = 0; |
| if (errnum) |
| return 0; |
| |
| return in_range (arg, ret); |
| } |
| |
| static struct builtin builtin_checkrange = |
| { |
| "checkrange", |
| checkrange_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "checkrange RANGE COMMAND", |
| "Return true if the return value of COMMAND is in RANGE and false otherwise." |
| }; |
| #ifndef GRUB_UTIL |
| /* checktime */ |
| static int |
| checktime_func(char *arg, int flags) |
| { |
| unsigned long date,time; |
| int day, month, year, sec, min, hour, dow, ii; |
| int limit[5][2] = {{0, 59}, {0, 23}, {1, 31}, {1, 12}, {0, 7}}; |
| int field[5]; |
| |
| auto int get_day_of_week (void); |
| int get_day_of_week (void) |
| { |
| int a, y, m; |
| |
| a = (14 - month) / 12; |
| y = year - a; |
| m = month + 12 * a - 2; |
| return (day + y + y / 4 - y / 100 + y / 400 + (31 * m / 12)) % 7; |
| } |
| |
| get_datetime(&date, &time); |
| |
| day = ((date >> 4) & 0xF) * 10 + (date & 0xF); |
| date >>= 8; |
| |
| month = ((date >> 4) & 0xF) * 10 + (date & 0xF); |
| date >>= 8; |
| |
| year = ((date >> 4) & 0xF) * 10 + (date & 0xF); |
| date >>= 8; |
| year += (((date >> 4) & 0xF) * 10 + (date & 0xF)) * 100; |
| |
| time >>= 8; |
| |
| sec = ((time >> 4) & 0xF) * 10 + (time & 0xF); |
| time >>= 8; |
| |
| min = ((time >> 4) & 0xF) * 10 + (time & 0xF); |
| time >>= 8; |
| |
| hour = ((time >> 4) & 0xF) * 10 + (time & 0xF); |
| |
| dow = get_day_of_week(); |
| |
| field[0] = min; |
| field[1] = hour; |
| field[2] = day; |
| field[3] = month; |
| field[4] = dow; |
| |
| if (! arg[0]) |
| { |
| grub_printf ("%d-%02d-%02d %02d:%02d:%02d %d\n", year, month, day, hour, min, sec, dow); |
| return 1; |
| } |
| |
| for (ii = 0; ii < 5; ii++) |
| { |
| char *p; |
| int ok = 0; |
| |
| if (! arg[0]) |
| break; |
| |
| p = arg; |
| while (1) |
| { |
| unsigned long long m1, m2, m3; |
| int j; |
| |
| if (*p == '*') |
| { |
| m1 = limit[ii][0]; |
| m2 = limit[ii][1]; |
| p++; |
| } |
| else |
| { |
| if (! safe_parse_maxint (&p, &m1)) |
| return 0; |
| |
| if (*p == '-') |
| { |
| p++; |
| if (! safe_parse_maxint (&p, &m2)) |
| return 0; |
| } |
| else |
| m2 = m1; |
| } |
| |
| if ((m1 < limit[ii][0]) || (m2 > limit[ii][1]) || (m1 > m2)) |
| return 0; |
| |
| if (*p == '/') |
| { |
| p++; |
| if (! safe_parse_maxint (&p, &m3)) |
| return 0; |
| } |
| else |
| m3 = 1; |
| |
| for (j = m1; j <= m2; j+= m3) |
| { |
| if (j == field[ii]) |
| { |
| ok = 1; |
| break; |
| } |
| } |
| |
| if (ok) |
| break; |
| |
| if (*p == ',') |
| p++; |
| else |
| break; |
| } |
| |
| if (! ok) |
| break; |
| |
| arg = skip_to (0, arg); |
| } |
| |
| return (ii == 5); |
| } |
| |
| static struct builtin builtin_checktime = |
| { |
| "checktime", |
| checktime_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "checktime min hour dom month dow", |
| "Check time." |
| }; |
| #endif |
| |
| /* clear */ |
| static int |
| clear_func() |
| { |
| if (current_term->cls) |
| current_term->cls(); |
| |
| return 1; |
| } |
| |
| static struct builtin builtin_clear = |
| { |
| "clear", |
| clear_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "clear", |
| "Clear the screen" |
| }; |
| |
| |
| #if 0 |
| /* displayapm */ |
| static int |
| displayapm_func (char *arg, int flags) |
| { |
| if (mbi.flags & MB_INFO_APM_TABLE) |
| { |
| grub_printf ("APM BIOS information:\n" |
| " Version: 0x%x\n" |
| " 32-bit CS: 0x%x\n" |
| " Offset: 0x%x\n" |
| " 16-bit CS: 0x%x\n" |
| " 16-bit DS: 0x%x\n" |
| " 32-bit CS length: 0x%x\n" |
| " 16-bit CS length: 0x%x\n" |
| " 16-bit DS length: 0x%x\n", |
| (unsigned) apm_bios_info.version, |
| (unsigned) apm_bios_info.cseg, |
| apm_bios_info.offset, |
| (unsigned) apm_bios_info.cseg_16, |
| (unsigned) apm_bios_info.dseg_16, |
| (unsigned) apm_bios_info.cseg_len, |
| (unsigned) apm_bios_info.cseg_16_len, |
| (unsigned) apm_bios_info.dseg_16_len); |
| return 1; |
| } |
| |
| grub_printf ("No APM BIOS found or probe failed\n"); |
| |
| return 0; |
| } |
| |
| static struct builtin builtin_displayapm = |
| { |
| "displayapm", |
| displayapm_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "displayapm", |
| "Display APM BIOS information." |
| }; |
| #endif |
| |
| |
| /* displaymem */ |
| static int |
| displaymem_func (char *arg, int flags) |
| { |
| if (get_eisamemsize () != -1) |
| grub_printf (" EISA Memory BIOS Interface is present\n"); |
| if (get_mmap_entry ((void *) SCRATCHADDR, 0) != 0 |
| || *((int *) SCRATCHADDR) != 0) |
| grub_printf (" Address Map BIOS Interface is present\n"); |
| |
| grub_printf (" Lower memory: %uK, " |
| "Upper memory (to first chipset hole): %uK\n", |
| (unsigned long)saved_mem_lower, (unsigned long)saved_mem_upper); |
| |
| if (mbi.flags & MB_INFO_MEM_MAP) |
| { |
| struct AddrRangeDesc *map = (struct AddrRangeDesc *) saved_mmap_addr; |
| unsigned long end_addr = saved_mmap_addr + saved_mmap_length; |
| |
| grub_printf (" [Address Range Descriptor entries " |
| "immediately follow (values are 64-bit)]\n"); |
| while (end_addr > (unsigned long) map) |
| { |
| char *str; |
| |
| if (map->Type == MB_ARD_MEMORY) |
| str = "Usable RAM"; |
| else |
| str = "Reserved"; |
| grub_printf (" %s: Base: 0x%lX, Length: 0x%lX\n", |
| str, |
| (unsigned long long)(map->BaseAddr), |
| (unsigned long long)(map->Length)); |
| |
| map = ((struct AddrRangeDesc *) (((int) map) + 4 + map->size)); |
| } |
| } |
| |
| return 1; |
| } |
| |
| static struct builtin builtin_displaymem = |
| { |
| "displaymem", |
| displaymem_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "displaymem", |
| "Display what GRUB thinks the system address space map of the" |
| " machine is, including all regions of physical RAM installed." |
| }; |
| |
| |
| /* dump FROM TO */ |
| #ifdef GRUB_UTIL |
| static int |
| dump_func (char *arg, int flags) |
| { |
| char *from, *to; |
| FILE *fp; |
| char c; |
| |
| from = arg; |
| to = skip_to (0, arg); |
| if (! *from || ! *to) |
| { |
| errnum = ERR_BAD_ARGUMENT; |
| return 0; |
| } |
| |
| nul_terminate (from); |
| nul_terminate (to); |
| |
| if (! grub_open (from)) |
| return 0; |
| |
| fp = fopen (to, "w"); |
| if (! fp) |
| { |
| errnum = ERR_WRITE; |
| return 0; |
| } |
| |
| while (grub_read ((unsigned long long)(unsigned int)&c, 1, 0xedde0d90)) |
| if (fputc (c, fp) == EOF) |
| { |
| errnum = ERR_WRITE; |
| fclose (fp); |
| return 0; |
| } |
| |
| if (fclose (fp) == EOF) |
| { |
| errnum = ERR_WRITE; |
| return 0; |
| } |
| |
| grub_close (); |
| return 1; |
| } |
| |
| static struct builtin builtin_dump = |
| { |
| "dump", |
| dump_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT, |
| "dump FROM TO", |
| "Dump the contents of the file FROM to the file TO. FROM must be" |
| " a GRUB file and TO must be an OS file." |
| }; |
| #endif /* GRUB_UTIL */ |
| |
| |
| #ifdef GRUB_UTIL |
| static char embed_info[32]; |
| /* embed */ |
| /* Embed a Stage 1.5 in the first cylinder after MBR or in the |
| bootloader block in a FFS. */ |
| static int |
| embed_func (char *arg, int flags) |
| { |
| char *stage1_5; |
| char *device; |
| char *stage1_5_buffer = (char *) RAW_ADDR (0x100200); |
| unsigned long len, size; |
| unsigned long sector; |
| |
| stage1_5 = arg; |
| device = skip_to (0, stage1_5); |
| |
| /* Open a Stage 1.5. */ |
| if (! grub_open (stage1_5)) |
| return 0; |
| |
| /* Read the whole of the Stage 1.5. */ |
| len = grub_read ((unsigned long long)(unsigned int)stage1_5_buffer, -1ULL, 0xedde0d90); |
| grub_close (); |
| |
| if (errnum) |
| return 0; |
| |
| size = (len + SECTOR_SIZE - 1) / SECTOR_SIZE; |
| |
| /* Get the device where the Stage 1.5 will be embedded. */ |
| set_device (device); |
| if (errnum) |
| return 0; |
| |
| if (current_partition == 0xFFFFFF) |
| { |
| /* Embed it after the MBR. */ |
| |
| //#if defined(STAGE1_5) || defined(GRUB_UTIL) |
| //char mbr[SECTOR_SIZE]; |
| #define mbr ((char *) RAW_ADDR (0x100000)) |
| //#endif |
| #if 0 /* !!!! The obsolete EZ-BIOS no longer supported !!!! */ |
| char ezbios_check[2*SECTOR_SIZE]; |
| #endif |
| int i; |
| |
| /* Open the partition. */ |
| if (! open_partition ()) |
| return 0; |
| |
| /* No floppy has MBR. */ |
| if (! (current_drive & 0x80)) |
| { |
| errnum = ERR_DEV_VALUES; |
| return 0; |
| } |
| |
| /* Read the MBR of CURRENT_DRIVE. */ |
| //printf ("current_drive=%X, mbr=%X\n", current_drive, mbr); |
| if (! rawread (current_drive, PC_MBR_SECTOR, 0, SECTOR_SIZE, (unsigned long long)(unsigned int)mbr, 0xedde0d90)) |
| return 0; |
| |
| //printf ("current_drive=%X, mbr=%X\n", current_drive, mbr); |
| /* Sanity check. */ |
| if (! PC_MBR_CHECK_SIG (mbr)) |
| { |
| errnum = ERR_BAD_PART_TABLE; |
| return 0; |
| } |
| |
| /* Check if the disk can store the Stage 1.5. */ |
| for (i = 0; i < 4; i++) |
| if (PC_SLICE_TYPE (mbr, i) && PC_SLICE_START (mbr, i) - 1 < size) |
| { |
| errnum = ERR_NO_DISK_SPACE; |
| return 0; |
| } |
| |
| #if 0 /* !!!! The obsolete EZ-BIOS no longer supported !!!! */ |
| |
| /* Check for EZ-BIOS signature. It should be in the third |
| * sector, but due to remapping it can appear in the second, so |
| * load and check both. |
| */ |
| if (! rawread (current_drive, 1, 0, 2 * SECTOR_SIZE, ezbios_check)) |
| return 0; |
| |
| if (! memcmp (ezbios_check + 3, "AERMH", 5) |
| || ! memcmp (ezbios_check + 512 + 3, "AERMH", 5)) |
| { |
| /* The space after the MBR is used by EZ-BIOS which we must |
| * not overwrite. |
| */ |
| errnum = ERR_NO_DISK_SPACE; |
| return 0; |
| } |
| #endif |
| |
| sector = 1; |
| #undef mbr |
| } |
| else |
| { |
| /* Embed it in the bootloader block in the filesystem. */ |
| unsigned long start_sector; |
| |
| /* Open the partition. */ |
| if (! open_device ()) |
| return 0; |
| |
| /* Check if the current slice supports embedding. */ |
| if (fsys_table[fsys_type].embed_func == 0 |
| || ! fsys_table[fsys_type].embed_func (&start_sector, size)) |
| { |
| errnum = ERR_DEV_VALUES; |
| return 0; |
| } |
| |
| sector = part_start + start_sector; |
| } |
| |
| /* Clear the cache. */ |
| buf_track = -1; |
| |
| /* Now perform the embedding. */ |
| if (! devwrite ((unsigned long)(sector - part_start), size, stage1_5_buffer)) |
| return 0; |
| |
| grub_printf (" %d sectors are embedded.\n", (unsigned long)size); |
| grub_sprintf (embed_info, "%d+%d", (unsigned long)(sector - part_start), (unsigned long)size); |
| return 1; |
| } |
| |
| static struct builtin builtin_embed = |
| { |
| "embed", |
| embed_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST | BUILTIN_BOOTING, |
| "embed STAGE1_5 DEVICE", |
| "Embed the Stage 1.5 STAGE1_5 in the sectors after MBR if DEVICE" |
| " is a drive, or in the \"bootloader\" area if DEVICE is a FFS partition." |
| " Print the number of sectors which STAGE1_5 occupies if successful." |
| }; |
| #endif /* GRUB_UTIL */ |
| |
| |
| /* errnum */ |
| int |
| errnum_func (char *arg, int flags) |
| { |
| if (debug > 0) |
| grub_printf (" ERRNUM is %d\n", errnum); |
| return errnum; |
| } |
| |
| static struct builtin builtin_errnum = |
| { |
| "errnum", |
| errnum_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "errnum", |
| "Return the error number." |
| }; |
| |
| |
| /* errorcheck */ |
| static int |
| errorcheck_func (char *arg, int flags) |
| { |
| |
| /* If ARG is empty, toggle the flag. */ |
| if (! *arg) |
| { |
| errorcheck = ! errorcheck; |
| if (debug > 0) |
| grub_printf (" Error check is toggled now to be %s\n", (errorcheck ? "on" : "off")); |
| } |
| else if (grub_memcmp (arg, "on", 2) == 0) |
| errorcheck = 1; |
| else if (grub_memcmp (arg, "off", 3) == 0) |
| errorcheck = 0; |
| else if (grub_memcmp (arg, "status", 6) == 0) |
| { |
| if (debug > 0) |
| grub_printf (" Error check is now %s\n", (errorcheck ? "on" : "off")); |
| } |
| else |
| errnum = ERR_BAD_ARGUMENT; |
| |
| return errorcheck; |
| } |
| |
| static struct builtin builtin_errorcheck = |
| { |
| "errorcheck", |
| errorcheck_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "errorcheck [on | off | status]", |
| "Turn on/off or display the error check mode, or toggle it if no argument." |
| }; |
| |
| |
| /* fallback */ |
| static int |
| fallback_func (char *arg, int flags) |
| { |
| unsigned long i = 0; |
| int go=0; |
| if (memcmp(arg,"--go",4) == 0) |
| { |
| go = 1; |
| arg = skip_to (0, arg); |
| } |
| while (*arg) |
| { |
| unsigned long long entry; |
| unsigned long j; |
| |
| if (! safe_parse_maxint (&arg, &entry)) |
| return 0; |
| |
| /* Remove duplications to prevent infinite looping. */ |
| for (j = 0; j < i; j++) |
| if (entry == fallback_entries[j]) |
| break; |
| if (j != i) |
| continue; |
| |
| fallback_entries[i++] = entry; |
| if (i == MAX_FALLBACK_ENTRIES) |
| break; |
| |
| arg = skip_to (0, arg); |
| } |
| |
| if (i < MAX_FALLBACK_ENTRIES) |
| fallback_entries[i] = -1; |
| |
| fallback_entryno = (i == 0) ? -1 : 0; |
| if (go) return (errnum = MAX_ERR_NUM); |
| return 1; |
| } |
| |
| static struct builtin builtin_fallback = |
| { |
| "fallback", |
| fallback_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| #if 1 |
| "fallback NUM...", |
| "Go into unattended boot mode: if the default boot entry has any" |
| " errors, instead of waiting for the user to do anything, it" |
| " immediately starts over using the NUM entry (same numbering as the" |
| " `default' command). This obviously won't help if the machine" |
| " was rebooted by a kernel that GRUB loaded." |
| #endif |
| }; |
| |
| |
| /* command */ |
| char command_path[128]="(bd)/grub/"; |
| int |
| command_func (char *arg, int flags) |
| { |
| while (*arg == ' ' || *arg == '\t') arg++; |
| if ((unsigned char)*arg < 0x20) |
| { |
| if (debug > 0) |
| printf("Current default path: %s\n",command_path); |
| return 20; |
| } |
| |
| if (grub_memcmp (arg, "--set-path=", 11) == 0) |
| { |
| arg += 11; |
| if (strlen(arg) >= 127) |
| { |
| if (debug > 0) |
| printf("Set default command path error: PATH is too long \n"); |
| return 0; |
| } |
| if (! *arg) |
| return sprintf(command_path,"(bd)/grub/\0"); |
| int j; |
| |
| for (j = 0; j < 126; j++) |
| { |
| if (*arg == 0x20 || *arg == '\t' || *arg == 0) |
| { |
| break; |
| } |
| command_path[j] = *arg; |
| arg++; |
| } |
| |
| if (command_path[j-1] != '/') command_path[j++] = '/'; |
| command_path[j] = 0; |
| return 1; |
| } |
| if (! flags) /* check syntax only */ |
| { |
| if (*arg == '/' || *arg == '(' || *arg == '+') |
| return 1; |
| if (*arg >= '0' && *arg <= '9') |
| return 1; |
| if (*arg >= 'a' && *arg <= 'z') |
| return 1; |
| if (*arg >= 'A' && *arg <= 'Z') |
| return 1; |
| return 0; |
| } |
| |
| /* open the command file. */ |
| { |
| char *filename; |
| char command_filename[256]; |
| |
| grub_memmove (command_filename + 1, arg, sizeof(command_filename) - 2); |
| command_filename[0] = '/'; |
| command_filename[255] = 0; |
| nul_terminate (command_filename + 1); |
| filename = command_filename + 1; |
| |
| if ((*arg >= 'a' && *arg <= 'z') || (*arg >= 'A' && *arg <= 'Z')) |
| { |
| char filename_t[512];/* use 512 here instead of 256 to avoid buffer overflow in the following sprintf. */ |
| sprintf(filename_t,"%s%s\0",command_path,filename); |
| if ((! grub_open (filename_t)) && (! grub_open (filename - 1))) |
| { |
| if (debug > 0) |
| grub_printf ("Warning! No such command: %s\n", filename); |
| errnum = 0; /* No error, so that old menus will run smoothly. */ |
| return 0; /* return 0 indicating a failure or a false case. */ |
| } |
| errnum = 0; |
| } |
| else if (! grub_open (filename)) |
| { |
| return 0; /* return 'failure' with errnum set. */ |
| } |
| |
| if (filemax < 9ULL) |
| { |
| errnum = ERR_EXEC_FORMAT; |
| goto fail; |
| } |
| } |
| |
| /* check if we have enough memory. */ |
| { |
| unsigned long long memory_needed; |
| |
| arg = skip_to (0, arg); /* get argument of command */ |
| memory_needed = filemax + ((grub_strlen (arg) + 16) & ~0xF) + 16 + 16; |
| |
| /* The amount of free memory is (free_mem_end - free_mem_start) */ |
| |
| if (memory_needed > (free_mem_end - free_mem_start)) |
| { |
| errnum = ERR_WONT_FIT; |
| goto fail; |
| } |
| } |
| |
| /* Where is the free memory? build PSP, load the executable image. */ |
| { |
| unsigned long pid = 255; |
| unsigned long j; |
| unsigned long psp_len; |
| |
| for (j = 1; (unsigned long)&mem_alloc_array_start[j] < mem_alloc_array_end && mem_alloc_array_start[j].addr; j++) |
| if (pid < mem_alloc_array_start[j].pid) |
| pid = mem_alloc_array_start[j].pid; |
| pid++; /* new pid. */ |
| |
| /* j - 1 is possibly for free memory start */ |
| --j; |
| |
| if ((mem_alloc_array_start[j].addr & 0x01)) /* no free memory. */ |
| { |
| errnum = ERR_WONT_FIT; |
| goto fail; |
| } |
| |
| /* check sanity */ |
| if ((mem_alloc_array_start[j].addr & 0xFFFFFFF0) != free_mem_start) |
| { |
| errnum = ERR_INTERNAL_CHECK; |
| goto fail; |
| } |
| |
| ((unsigned long *)free_mem_start)[0] = psp_len = ((grub_strlen (arg) + 16) & ~0xF) + 16 + 16; |
| grub_memmove ((char *)(free_mem_start + 16), arg, grub_strlen (arg) + 1); /* copy args into somewhere in PSP. */ |
| *(unsigned long *)(free_mem_start + psp_len - 4) = psp_len; /* PSP length in bytes. it is in both the starting dword and the ending dword of the PSP. */ |
| *(unsigned long *)(free_mem_start + psp_len - 8) = psp_len - 16; /* args is here. */ |
| *(unsigned long *)(free_mem_start + psp_len - 12) = flags; /* flags is here. */ |
| /* (free_mem_start + pid - 16) is reserved for full pathname of the program file. */ |
| |
| /* kernel image is destroyed, so invalidate the kernel */ |
| if (kernel_type < KERNEL_TYPE_CHAINLOADER) |
| kernel_type = KERNEL_TYPE_NONE; |
| |
| if (grub_read ((unsigned long long)(free_mem_start + psp_len), -1ULL, 0xedde0d90) != filemax) |
| { |
| if (! errnum) |
| errnum = ERR_EXEC_FORMAT; |
| goto fail; |
| } |
| grub_close (); |
| |
| /* check exec signature. */ |
| if (*(unsigned long long *)(int)(free_mem_start + psp_len + filemax - 8) != 0xBCBAA7BA03051805ULL) |
| return ! (errnum = ERR_EXEC_FORMAT); |
| |
| /* allocate all memory to the program. */ |
| mem_alloc_array_start[j].addr |= 0x01; /* the memory is now in use. */ |
| mem_alloc_array_start[j].pid = pid; /* with this pid. */ |
| |
| psp_len += free_mem_start; |
| free_mem_start = free_mem_end; /* no free memory for other programs. */ |
| |
| /* call the new program. (free_mem_start + psp_len) = entry point of program. */ |
| pid = ((int (*)(void))(psp_len))(); /* pid holds return value. */ |
| |
| /* on exit, release the memory. */ |
| for (j = 1; (unsigned long)&mem_alloc_array_start[j] < mem_alloc_array_end && mem_alloc_array_start[j].addr; j++) |
| ; |
| --j; |
| mem_alloc_array_start[j].pid = 0; |
| free_mem_start = (mem_alloc_array_start[j].addr &= 0xFFFFFFF0); |
| return pid; |
| } |
| |
| //return 1; |
| |
| fail: |
| |
| grub_close (); |
| return 0; |
| } |
| |
| static struct builtin builtin_command = |
| { |
| "command", |
| command_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST | BUILTIN_BOOTING, |
| "command [--set-path=PATH] FILE [ARGS]", |
| "Run executable file FILE with arguments ARGS." |
| "--set-path sets a search PATH for executable files,default is (bd)/grub." |
| }; |
| |
| |
| /* commandline */ |
| int |
| commandline_func (char *arg, int flags) |
| { |
| int forever = 0; |
| char *config_entries = arg; |
| |
| enter_cmdline(config_entries, forever); |
| |
| return 1; |
| } |
| |
| static struct builtin builtin_commandline = |
| { |
| "commandline", |
| commandline_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST | BUILTIN_BOOTING, |
| #if 1 |
| "commandline", |
| "Enter command-line prompt mode." |
| #endif |
| }; |
| |
| |
| extern int bsd_evil_hack; |
| |
| extern unsigned long next_partition_drive; |
| extern unsigned long next_partition_dest; |
| extern unsigned long *next_partition_partition; |
| extern unsigned long *next_partition_type; |
| extern unsigned long *next_partition_start; |
| extern unsigned long *next_partition_len; |
| extern unsigned long *next_partition_offset; |
| extern unsigned long *next_partition_entry; |
| extern unsigned long *next_partition_ext_offset; |
| extern char *next_partition_buf; |
| |
| //extern unsigned long dest_partition; |
| //static unsigned long entry; |
| //static unsigned long ext_offset; |
| |
| /* Hide/Unhide CURRENT_PARTITION. */ |
| static int |
| set_partition_hidden_flag (int hidden) |
| { |
| unsigned long part = 0xFFFFFF; |
| unsigned long start, len, offset, ext_offset1; |
| unsigned long type, entry1; |
| #ifdef GRUB_UTIL |
| // char mbr[512]; |
| #endif |
| |
| /* The drive must be a hard disk. */ |
| if (! (current_drive & 0x80)) |
| { |
| errnum = ERR_BAD_ARGUMENT; |
| return 0; |
| } |
| |
| /* The partition must be a PC slice. */ |
| if ((current_partition >> 16) == 0xFF |
| || (current_partition & 0xFFFF) != 0xFFFF) |
| { |
| errnum = ERR_BAD_ARGUMENT; |
| return 0; |
| } |
| |
| /* Look for the partition. */ |
| while (( next_partition_drive = current_drive, |
| next_partition_dest = 0xFFFFFF, |
| next_partition_partition = &part, |
| next_partition_type = &type, |
| next_partition_start = &start, |
| next_partition_len = &len, |
| next_partition_offset = &offset, |
| next_partition_entry = &entry1, |
| next_partition_ext_offset = &ext_offset1, |
| next_partition_buf = mbr, |
| next_partition ())) |
| // while (next_partition (current_drive, 0xFFFFFF, &part, &type, |
| // &start, &len, &offset, &entry, |
| // &ext_offset, mbr)) |
| { |
| if (part == current_partition) |
| { |
| int is_hidden = (PC_SLICE_TYPE (mbr, entry1) & PC_SLICE_TYPE_HIDDEN_FLAG); |
| /* Found. */ |
| if (hidden == -1) /* status only */ |
| { |
| if (debug > 0) |
| grub_printf ("Partition (hd%d,%d) is %shidden.\n", (current_drive & 0x7F), (unsigned long)(unsigned char)(part>>16), (is_hidden ? "" : "not ")); |
| |
| return is_hidden; |
| } |
| |
| /* Check if the hidden flag need change. */ |
| if ((!hidden) != (!is_hidden)) |
| { |
| if (hidden) |
| PC_SLICE_TYPE (mbr, entry1) |= PC_SLICE_TYPE_HIDDEN_FLAG; |
| else |
| PC_SLICE_TYPE (mbr, entry1) &= ~PC_SLICE_TYPE_HIDDEN_FLAG; |
| |
| /* Write back the MBR to the disk. */ |
| buf_track = -1; |
| if (! rawwrite (current_drive, offset, mbr)) |
| return 0; |
| |
| if (debug > 0) |
| grub_printf ("Partition (hd%d,%d) successfully set %shidden.\n", (current_drive & 0x7F), (unsigned long)(unsigned char)(part>>16), (hidden ? "" : "un")); |
| } else { |
| if (debug > 0) |
| grub_printf ("Partition (hd%d,%d) was already %shidden.\n", (current_drive & 0x7F), (unsigned long)(unsigned char)(part>>16), (hidden ? "" : "un")); |
| |
| } |
| |
| /* Succeed. */ |
| return 1; |
| } |
| } |
| |
| return 0; |
| } |
| |
| |
| |
| static int real_root_func (char *arg1, int attempt_mnt); |
| /* find */ |
| /* Search for the filename ARG in all of partitions and optionally make that |
| * partition root("--set-root", Thanks to Chris Semler <csemler@mail.com>). |
| */ |
| static int |
| find_func (char *arg, int flags) |
| { |
| struct builtin *builtin1 = 0; |
| int ret; |
| char *filename; |
| unsigned long drive; |
| unsigned long tmp_drive = saved_drive; |
| unsigned long tmp_partition = saved_partition; |
| unsigned long got_file = 0; |
| char *set_root = 0; |
| unsigned long ignore_cd = 0; |
| unsigned long ignore_floppies = 0; |
| unsigned long ignore_oem = 0; |
| //char *in_drives = NULL; /* search in drive list */ |
| char root_found[16]; |
| |
| for (;;) |
| { |
| if (grub_memcmp (arg, "--set-root=", 11) == 0) |
| { |
| set_root = arg + 11; |
| if (*set_root && *set_root != ' ' && *set_root != '\t' && *set_root != '/') |
| return ! (errnum = ERR_FILENAME_FORMAT); |
| } |
| else if (grub_memcmp (arg, "--set-root", 10) == 0) |
| { |
| set_root = ""; |
| } |
| else if (grub_memcmp (arg, "--ignore-cd", 11) == 0) |
| { |
| ignore_cd = 1; |
| } |
| else if (grub_memcmp (arg, "--ignore-floppies", 17) == 0) |
| { |
| ignore_floppies = 1; |
| } |
| else if (grub_memcmp (arg, "--ignore-oem", 12) == 0) |
| { |
| ignore_oem = 1; |
| } |
| else |
| break; |
| arg = skip_to (0, arg); |
| } |
| |
| /* The filename should NOT have a DEVICE part. */ |
| filename = set_device (arg); |
| if (filename) |
| return ! (errnum = ERR_FILENAME_FORMAT); |
| |
| if (*arg == '/' || *arg == '+' || (*arg >= '0' && *arg <= '9')) |
| { |
| filename = arg; |
| arg = skip_to (0, arg); |
| } else { |
| filename = 0; |
| } |
| |
| /* arg points to command. */ |
| |
| // if (*arg >= 'a' && *arg <= 'z') |
| if (*arg) |
| { |
| builtin1 = find_command (arg); |
| if ((int)builtin1 != -1) |
| if (! builtin1 || ! (builtin1->flags & flags)) |
| { |
| errnum = ERR_UNRECOGNIZED; |
| return 0; |
| } |
| if ((int)builtin1 != -1) |
| arg = skip_to (1, arg); /* get argument of command */ |
| else |
| builtin1 = &builtin_command; |
| } |
| // else if (*arg) |
| // { |
| // errnum = ERR_UNRECOGNIZED; |
| // return 0; |
| // } |
| |
| errnum = 0; |
| |
| #ifdef FSYS_FB |
| if (fb_status) |
| { |
| current_drive = FB_DRIVE; |
| current_partition = 0xFFFFFF; |
| |
| if (filename == 0) |
| { |
| saved_drive = current_drive; |
| saved_partition = current_partition; |
| ret = builtin1 ? (builtin1->func) (arg, flags) : 1; |
| if (ret) |
| { |
| grub_sprintf (root_found, "(ud)"); |
| if (debug > 0) |
| grub_printf (" %s\n", root_found); |
| got_file = 1; |
| if (set_root) |
| goto found; |
| } |
| } |
| else if (open_device ()) |
| { |
| saved_drive = current_drive; |
| saved_partition = current_partition; |
| if (grub_open (filename)) |
| { |
| grub_close (); |
| ret = builtin1 ? (builtin1->func) (arg, flags) : 1; |
| if (ret) |
| { |
| grub_sprintf (root_found, "(ud)"); |
| if (debug > 0) |
| grub_printf (" %s\n", root_found); |
| got_file = 1; |
| if (set_root) |
| goto found; |
| } |
| } |
| } |
| |
| errnum = ERR_NONE; |
| } |
| #endif |
| |
| /* Hard disks. Search in hard disks first, since floppies are slow */ |
| #ifdef GRUB_UTIL |
| #define FIND_DRIVES 8 |
| #else |
| #define FIND_DRIVES (*((char *)0x475)) |
| #endif |
| for (drive = 0x80; drive < 0x80 + FIND_DRIVES; drive++) |
| #undef FIND_DRIVES |
| { |
| unsigned long part = 0xFFFFFF; |
| unsigned long start, len, offset, ext_offset1; |
| unsigned long type, entry1; |
| #if defined(STAGE1_5) || defined(GRUB_UTIL) |
| // char mbr[SECTOR_SIZE]; |
| #endif |
| |
| current_drive = drive; |
| while (( next_partition_drive = drive, |
| next_partition_dest = 0xFFFFFF, |
| next_partition_partition = &part, |
| next_partition_type = &type, |
| next_partition_start = &start, |
| next_partition_len = &len, |
| next_partition_offset = &offset, |
| next_partition_entry = &entry1, |
| next_partition_ext_offset = &ext_offset1, |
| next_partition_buf = mbr, |
| next_partition ())) |
| { |
| if (type != PC_SLICE_TYPE_NONE |
| && ! (ignore_oem == 1 && (type & ~PC_SLICE_TYPE_HIDDEN_FLAG) == 0x02) |
| && ! IS_PC_SLICE_TYPE_BSD (type) |
| && ! IS_PC_SLICE_TYPE_EXTENDED (type)) |
| { |
| current_partition = part; |
| if (filename == 0) |
| { |
| int bsd_part = (part >> 8) & 0xFF; |
| int pc_slice = part >> 16; |
| |
| saved_drive = current_drive; |
| saved_partition = current_partition; |
| |
| ret = builtin1 ? (builtin1->func) (arg, flags) : 1; |
| if (ret) |
| { |
| if (bsd_part == 0xFF) |
| grub_sprintf (root_found, "(hd%d,%d)", |
| (drive - 0x80), pc_slice); |
| else |
| grub_sprintf (root_found, "(hd%d,%d,%c)", |
| (drive - 0x80), pc_slice, (bsd_part + 'a')); |
| |
| if (debug > 0) |
| grub_printf (" %s\n", root_found); |
| got_file = 1; |
| if (set_root) |
| goto found; |
| } |
| } |
| else if (open_device ()) |
| { |
| saved_drive = current_drive; |
| saved_partition = current_partition; |
| if (grub_open (filename)) |
| { |
| int bsd_part = (part >> 8) & 0xFF; |
| int pc_slice = part >> 16; |
| |
| grub_close (); |
| |
| ret = builtin1 ? (builtin1->func) (arg, flags) : 1; |
| if (ret) |
| { |
| if (bsd_part == 0xFF) |
| grub_sprintf (root_found, "(hd%d,%d)", |
| (drive - 0x80), pc_slice); |
| else |
| grub_sprintf (root_found, "(hd%d,%d,%c)", |
| (drive - 0x80), pc_slice, (bsd_part + 'a')); |
| |
| if (debug > 0) |
| grub_printf (" %s\n", root_found); |
| got_file = 1; |
| if (set_root) |
| goto found; |
| } |
| } |
| } |
| } |
| |
| /* We want to ignore any error here. */ |
| errnum = ERR_NONE; |
| } |
| |
| /* next_partition always sets ERRNUM in the last call, so clear |
| it. */ |
| errnum = ERR_NONE; |
| } |
| |
| /* CD-ROM. */ |
| if (cdrom_drive != GRUB_INVALID_DRIVE && ! ignore_cd) |
| { |
| current_drive = cdrom_drive; |
| current_partition = 0xFFFFFF; |
| |
| if (filename == 0) |
| { |
| saved_drive = current_drive; |
| saved_partition = current_partition; |
| ret = builtin1 ? (builtin1->func) (arg, flags) : 1; |
| if (ret) |
| { |
| grub_sprintf (root_found, "(cd)"); |
| if (debug > 0) |
| grub_printf (" %s\n", root_found); |
| got_file = 1; |
| if (set_root) |
| goto found; |
| } |
| } |
| else if (open_device ()) |
| { |
| saved_drive = current_drive; |
| saved_partition = current_partition; |
| if (grub_open (filename)) |
| { |
| grub_close (); |
| ret = builtin1 ? (builtin1->func) (arg, flags) : 1; |
| if (ret) |
| { |
| grub_sprintf (root_found, "(cd)"); |
| if (debug > 0) |
| grub_printf (" %s\n", root_found); |
| got_file = 1; |
| if (set_root) |
| goto found; |
| } |
| } |
| } |
| |
| errnum = ERR_NONE; |
| } |
| |
| /* Floppies. */ |
| #ifdef GRUB_UTIL |
| #define FIND_DRIVES 8 |
| #else |
| #define FIND_DRIVES (((*(char*)0x410) & 1)?((*(char*)0x410) >> 6) + 1 : 0) |
| #endif |
| if (! ignore_floppies) |
| { |
| for (drive = 0; drive < 0 + FIND_DRIVES; drive++) |
| #undef FIND_DRIVES |
| { |
| current_drive = drive; |
| current_partition = 0xFFFFFF; |
| |
| if (filename == 0) |
| { |
| saved_drive = current_drive; |
| saved_partition = current_partition; |
| ret = builtin1 ? (builtin1->func) (arg, flags) : 1; |
| if (ret) |
| { |
| grub_sprintf (root_found, "(fd%d)", drive); |
| if (debug > 0) |
| grub_printf (" %s\n", root_found); |
| got_file = 1; |
| if (set_root) |
| goto found; |
| } |
| } |
| else if (open_device ()) |
| { |
| saved_drive = current_drive; |
| saved_partition = current_partition; |
| if (grub_open (filename)) |
| { |
| grub_close (); |
| ret = builtin1 ? (builtin1->func) (arg, flags) : 1; |
| if (ret) |
| { |
| grub_sprintf (root_found, "(fd%d)", drive); |
| if (debug > 0) |
| grub_printf (" %s\n", root_found); |
| got_file = 1; |
| if (set_root) |
| goto found; |
| } |
| } |
| } |
| |
| errnum = ERR_NONE; |
| } |
| } |
| |
| found: |
| saved_drive = tmp_drive; |
| saved_partition = tmp_partition; |
| |
| if (got_file) |
| { |
| errnum = ERR_NONE; |
| if (set_root) |
| { |
| int j; |
| |
| //return real_root_func (root_found, 1); |
| saved_drive = current_drive; |
| saved_partition = current_partition; |
| /* copy root prefix to saved_dir */ |
| for (j = 0; j < sizeof (saved_dir); j++) |
| { |
| char ch; |
| |
| ch = set_root[j]; |
| if (ch == 0 || ch == 0x20 || ch == '\t') |
| break; |
| if (ch == '\\') |
| { |
| saved_dir[j] = ch; |
| j++; |
| ch = set_root[j]; |
| if (! ch || j >= sizeof (saved_dir)) |
| { |
| j--; |
| saved_dir[j] = 0; |
| break; |
| } |
| } |
| saved_dir[j] = ch; |
| } |
| |
| if (saved_dir[j-1] == '/') |
| { |
| saved_dir[j-1] = 0; |
| } else |
| saved_dir[j] = 0; |
| } |
| return 1; |
| } |
| |
| errnum = ERR_FILE_NOT_FOUND; |
| return 0; |
| } |
| |
| static struct builtin builtin_find = |
| { |
| "find", |
| find_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "find [--set-root[=DIR]] [--ignore-floppies] [--ignore-cd] [FILENAME] [CONDITION]", |
| "Search for the filename FILENAME in all of partitions and print the list of" |
| " the devices which contain the file and suffice CONDITION. CONDITION is a" |
| " normal grub command, which return non-zero for TRUE and zero for FALSE." |
| " If the option --set-root is used and FILENAME is found on a device, then" |
| " stop the find immediately and set the device as new root." |
| " If the option --ignore-floppies is present, the search will bypass all" |
| " floppies. And --ignore-cd will skip (cd)." |
| }; |
| |
| |
| /* uuid */ |
| /* List filesystem UUID in all of partitions or search for filesystem |
| * with specified UUID and set the partition as root. |
| * Contributed by Jing Liu ( fartersh-1@yahoo.com ) |
| */ |
| static void print_root_device (void); |
| static void get_uuid (char* uuid_found); |
| static int |
| uuid_func (char *arg, int flags) |
| { |
| unsigned long drive; |
| unsigned long tmp_drive = saved_drive; |
| unsigned long tmp_partition = saved_partition; |
| char root_found[16] = ""; |
| char uuid_found[100]; |
| |
| if (*arg == '(') |
| { |
| set_device (arg); |
| if (errnum) |
| return 0; |
| if (! open_device ()) |
| return 0; |
| saved_drive = current_drive; |
| saved_partition = current_partition; |
| grub_memset (uuid_found, 0, 100); |
| if (errnum != ERR_FSYS_MOUNT && fsys_type < NUM_FSYS) |
| get_uuid (uuid_found); |
| arg = skip_to (0, arg); |
| if (! *arg ) |
| { |
| /* Print the type of the filesystem. */ |
| if (debug > 0) |
| { |
| print_root_device (); |
| grub_printf (" UUID is %s\n\t", ((*uuid_found) ? uuid_found : "(unsupported)")); |
| print_fsys_type (); |
| } |
| saved_drive = tmp_drive; |
| saved_partition = tmp_partition; |
| errnum = ERR_NONE; |
| return (*uuid_found); |
| } |
| saved_drive = tmp_drive; |
| saved_partition = tmp_partition; |
| errnum = ERR_NONE; |
| return ! grub_strcmp ((char*)uuid_found, arg); |
| } |
| |
| // if (! *arg && (flags & (BUILTIN_MENU | BUILTIN_SCRIPT))) |
| // { |
| // if (debug > 0) |
| // grub_printf ("uuid must be used with UUID argument in menu.lst.\n"); |
| // return ! (errnum = ERR_BAD_ARGUMENT); |
| // } |
| |
| errnum = 0; |
| /* Search in hard disks first, since floppies are slow */ |
| #ifdef GRUB_UTIL |
| #define FIND_DRIVES 8 |
| #else |
| #define FIND_DRIVES (*((char *)0x475)) |
| #endif |
| for (drive = 0x80; drive < 0x80 + FIND_DRIVES; drive++) |
| #undef FIND_DRIVES |
| { |
| unsigned long part = 0xFFFFFF; |
| unsigned long start, len, offset, ext_offset1; |
| unsigned long type, entry1; |
| |
| current_drive = drive; |
| while (( next_partition_drive = drive, |
| next_partition_dest = 0xFFFFFF, |
| next_partition_partition = &part, |
| next_partition_type = &type, |
| next_partition_start = &start, |
| next_partition_len = &len, |
| next_partition_offset = &offset, |
| next_partition_entry = &entry1, |
| next_partition_ext_offset = &ext_offset1, |
| next_partition_buf = mbr, |
| next_partition ())) |
| { |
| if (type != PC_SLICE_TYPE_NONE |
| && ! IS_PC_SLICE_TYPE_BSD (type) |
| && ! IS_PC_SLICE_TYPE_EXTENDED (type)) |
| { |
| current_partition = part; |
| if (open_device ()) |
| { |
| int bsd_part = (part >> 8) & 0xFF; |
| int pc_slice = part >> 16; |
| saved_drive = current_drive; |
| saved_partition = current_partition; |
| grub_memset(uuid_found, 0, 100); |
| if (errnum != ERR_FSYS_MOUNT && fsys_type < NUM_FSYS) |
| get_uuid(uuid_found); |
| if (*uuid_found) |
| { |
| if (! *arg ) |
| { |
| if (bsd_part == 0xFF) |
| grub_printf("(hd%d,%d): UUID is %s\n\t", (drive - 0x80), (unsigned long)(unsigned char)(part >> 16), uuid_found); |
| else |
| grub_printf ("(hd%d,%d,%c): UUID is %s\n\t", |
| (drive - 0x80), pc_slice, (bsd_part + 'a'), uuid_found); |
| print_fsys_type(); |
| } |
| else if (grub_strcmp((char*)uuid_found,arg) == 0) |
| { |
| if (bsd_part == 0xFF) |
| grub_sprintf(root_found,"(hd%d,%d)", (drive - 0x80), (unsigned long)(unsigned char)(part >> 16)); |
| else |
| grub_sprintf(root_found,"(hd%d,%d,%c)", |
| (drive - 0x80), pc_slice, (bsd_part + 'a')); |
| goto found; |
| } |
| } |
| else if (debug > 0) |
| { |
| if (bsd_part == 0xFF) |
| grub_printf("(hd%d,%d): UUID is (unsupported)\n\t", (drive - 0x80), (unsigned long)(unsigned char)(part >> 16)); |
| else |
| grub_printf("(hd%d,%d,%c): UUID is (unsupported)\n\t", |
| (drive - 0x80), pc_slice, (bsd_part + 'a')); |
| print_fsys_type(); |
| } |
| } |
| } |
| |
| /* We want to ignore any error here. */ |
| errnum = ERR_NONE; |
| } |
| |
| /* next_partition always sets ERRNUM in the last call, so clear it. */ |
| errnum = ERR_NONE; |
| } |
| |
| /* Floppies. */ |
| #ifdef GRUB_UTIL |
| #define FIND_DRIVES 8 |
| #else |
| #define FIND_DRIVES (((*(char*)0x410) & 1)?((*(char*)0x410) >> 6) + 1 : 0) |
| #endif |
| for (drive = 0; drive < 0 + FIND_DRIVES; drive++) |
| #undef FIND_DRIVES |
| { |
| current_drive = drive; |
| current_partition = 0xFFFFFF; |
| if (open_device ()) |
| { |
| saved_drive = current_drive; |
| saved_partition = current_partition; |
| grub_memset(uuid_found, 0, 100); |
| if (errnum != ERR_FSYS_MOUNT && fsys_type < NUM_FSYS) |
| get_uuid(uuid_found); |
| if (*uuid_found) |
| { |
| if (! *arg ) |
| { |
| grub_printf("(fd%d): UUID is %s\n\t", drive, uuid_found); |
| print_fsys_type(); |
| } |
| else if (grub_strcmp((char*)uuid_found,arg) == 0) |
| { |
| grub_sprintf(root_found,"(fd%d)", drive); |
| goto found; |
| } |
| } |
| else if (debug > 0) |
| { |
| grub_printf("(fd%d): UUID is (unsupported)\n\t", drive); |
| print_fsys_type(); |
| } |
| } |
| errnum = ERR_NONE; |
| } |
| |
| found: |
| saved_drive = tmp_drive; |
| saved_partition = tmp_partition; |
| errnum = ERR_NONE; |
| if (! *arg) |
| return 1; |
| |
| if (*root_found) |
| { |
| if (debug > 0) |
| grub_printf("setting root to %s\n", root_found); |
| return real_root_func(root_found,1); |
| } |
| |
| errnum = ERR_NO_PART; |
| return 0; |
| } |
| |
| static struct builtin builtin_uuid = |
| { |
| "uuid", |
| uuid_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "uuid [DEVICE] [UUID]", |
| "If DEVICE is not specified, search for filesystem with UUID in all" |
| " partitions and set the partition containing the filesystem as new" |
| " root(if UUID is specified), or just list uuid's of all filesystems" |
| " on all devices(if UUID is not specified). If DEVICE is specified," |
| " return true or false according to whether or not the DEVICE matches" |
| " the specified UUID(if UUID is specified), or just list the uuid of" |
| " DEVICE(if UUID is not specified)." |
| }; |
| |
| static void |
| get_uuid (char* uuid_found) |
| { |
| unsigned char uuid[32] = ""; |
| { |
| #ifdef FSYS_FAT |
| if (grub_memcmp(fsys_table[fsys_type].name, "fat", 3) == 0) |
| { |
| char fat_length[2]; |
| devread(0, 0x16, 2, (unsigned long long)(unsigned long)fat_length, 0xedde0d90); |
| if (*(unsigned short*)fat_length) |
| // FAT12/16 |
| devread(0, 0x27, 4, (unsigned long long)(unsigned long)uuid, 0xedde0d90); |
| else |
| // FAT32 |
| devread(0, 0x43, 4, (unsigned long long)(unsigned long)uuid, 0xedde0d90); |
| grub_sprintf(uuid_found, "%02X%02X-%02X%02X", uuid[3], uuid[2], uuid[1], uuid[0]); |
| return; |
| } |
| #endif |
| #ifdef FSYS_NTFS |
| if (grub_memcmp(fsys_table[fsys_type].name, "ntfs", 4) == 0) |
| { |
| devread(0, 0x48, 8, (unsigned long long)(unsigned long)uuid, 0xedde0d90); |
| grub_sprintf(uuid_found, "%02X%02X%02X%02X%02X%02X%02X%02X", uuid[7], uuid[6], uuid[5], uuid[4], uuid[3], uuid[2], uuid[1], uuid[0]); |
| return; |
| } |
| #endif |
| #ifdef FSYS_EXT2FS |
| if (grub_memcmp(fsys_table[fsys_type].name, "ext2fs", 6) == 0) |
| { |
| devread(2, 0x68, 16, (unsigned long long)(unsigned long)uuid, 0xedde0d90); |
| grub_sprintf(uuid_found, "%02x%02x%02x%02x-%02x%02x-%02x%02x-%02x%02x-%02x%02x%02x%02x%02x%02x", uuid[0], uuid[1], uuid[2], uuid[3], uuid[4], uuid[5], uuid[6], uuid[7], uuid[8], uuid[9], uuid[10], uuid[11], uuid[12], uuid[13], uuid[14], uuid[15]); |
| return; |
| } |
| #endif |
| #ifdef FSYS_REISERFS |
| if (grub_memcmp(fsys_table[fsys_type].name, "reiserfs", 8) == 0) |
| { |
| char version[9]; |
| devread(0x10, 52, 9, (unsigned long long)(unsigned long)version, 0xedde0d90); |
| if (grub_memcmp(version, "ReIsEr2Fs", 9) == 0 || grub_memcmp(version, "ReIsEr3Fs", 9) == 0) |
| devread(0x10, 84, 16, (unsigned long long)(unsigned long)uuid, 0xedde0d90); |
| else |
| { |
| devread(0x10, 0, 7, (unsigned long long)(unsigned long)version, 0xedde0d90); |
| if (grub_memcmp(version, "ReIsEr4", 7) == 0) |
| devread(0x10, 20, 16, (unsigned long long)(unsigned long)uuid, 0xedde0d90); |
| else |
| return; |
| } |
| grub_sprintf(uuid_found, "%02x%02x%02x%02x-%02x%02x-%02x%02x-%02x%02x-%02x%02x%02x%02x%02x%02x", uuid[0], uuid[1], uuid[2], uuid[3], uuid[4], uuid[5], uuid[6], uuid[7], uuid[8], uuid[9], uuid[10], uuid[11], uuid[12], uuid[13], uuid[14], uuid[15]); |
| return; |
| } |
| #endif |
| #ifdef FSYS_JFS |
| if (grub_memcmp(fsys_table[fsys_type].name, "jfs", 3) == 0) |
| { |
| devread(0x40, 136, 16, (unsigned long long)(unsigned long)uuid, 0xedde0d90); |
| grub_sprintf(uuid_found, "%02x%02x%02x%02x-%02x%02x-%02x%02x-%02x%02x-%02x%02x%02x%02x%02x%02x", uuid[0], uuid[1], uuid[2], uuid[3], uuid[4], uuid[5], uuid[6], uuid[7], uuid[8], uuid[9], uuid[10], uuid[11], uuid[12], uuid[13], uuid[14], uuid[15]); |
| return; |
| } |
| #endif |
| #ifdef FSYS_XFS |
| if (grub_memcmp(fsys_table[fsys_type].name, "xfs", 3) == 0) |
| { |
| devread(2, 32, 16, (unsigned long long)(unsigned long)uuid, 0xedde0d90); |
| grub_sprintf(uuid_found, "%02x%02x%02x%02x-%02x%02x-%02x%02x-%02x%02x-%02x%02x%02x%02x%02x%02x", uuid[0], uuid[1], uuid[2], uuid[3], uuid[4], uuid[5], uuid[6], uuid[7], uuid[8], uuid[9], uuid[10], uuid[11], uuid[12], uuid[13], uuid[14], uuid[15]); |
| return; |
| } |
| #endif |
| } |
| } |
| |
| |
| /* fstest */ |
| static int |
| fstest_func (char *arg, int flags) |
| { |
| |
| /* If ARG is empty, toggle the flag. */ |
| if (! *arg) |
| { |
| if (disk_read_hook) |
| { |
| disk_read_hook = NULL; |
| if (debug > 0) |
| printf (" Filesystem tracing is now off\n"); |
| }else{ |
| disk_read_hook = disk_read_print_func; |
| if (debug > 0) |
| printf (" Filesystem tracing is now on\n"); |
| } |
| } |
| else if (grub_memcmp (arg, "on", 2) == 0) |
| disk_read_hook = disk_read_print_func; |
| else if (grub_memcmp (arg, "off", 3) == 0) |
| disk_read_hook = NULL; |
| else if (grub_memcmp (arg, "status", 6) == 0) |
| { |
| if (debug > 0) |
| grub_printf (" Filesystem tracing is now %s\n", (disk_read_hook ? "on" : "off")); |
| } |
| else |
| errnum = ERR_BAD_ARGUMENT; |
| |
| return (int)disk_read_hook; |
| } |
| |
| static struct builtin builtin_fstest = |
| { |
| "fstest", |
| fstest_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "fstest [on | off | status]", |
| "Turn on/off or display the fstest mode, or toggle it if no argument." |
| }; |
| |
| #ifdef SUPPORT_GFX |
| |
| /* graphics */ |
| static int |
| gfxmenu_func (char *arg, int flags) |
| { |
| //if (*arg) |
| //{ |
| /* filename can only be 64 characters due to our buffer size */ |
| if (strlen(arg) > 63) |
| return ! (errnum = ERR_WONT_FIT); |
| |
| if (! grub_open(arg)) |
| return 0; |
| grub_close(); |
| //} |
| |
| strcpy(graphics_file, arg); |
| |
| //memmove(graphics_file, arg, sizeof graphics_file - 1); |
| //graphics_file[sizeof graphics_file - 1] = 0; |
| gfx_drive = saved_drive; |
| gfx_partition = saved_partition; |
| |
| return 1; |
| } |
| |
| static struct builtin builtin_gfxmenu = |
| { |
| "gfxmenu", |
| gfxmenu_func, |
| BUILTIN_MENU | BUILTIN_HELP_LIST, |
| "gfxmenu FILE", |
| "Use the graphical menu from FILE." |
| }; |
| #endif |
| |
| |
| /* geometry */ |
| static int |
| geometry_func (char *arg, int flags) |
| { |
| // struct geometry tmp_geom; |
| char *msg; |
| // char *device = arg; |
| //#ifdef GRUB_UTIL |
| // char *ptr; |
| //#endif |
| |
| #ifndef GRUB_UTIL |
| int sync = 0; |
| |
| force_geometry_tune = 0; |
| for (;;) |
| { |
| if (grub_memcmp (arg, "--tune", 6) == 0) |
| { |
| force_geometry_tune = 1; |
| } |
| else if (grub_memcmp (arg, "--sync", 6) == 0) |
| { |
| sync = 1; |
| } |
| else |
| break; |
| arg = skip_to (0, arg); |
| } |
| #endif |
| |
| /* Get the drive and the partition. */ |
| if (! *arg || *arg == ' ' || *arg == '\t') |
| { |
| current_drive = saved_drive; |
| current_partition = saved_partition; |
| } |
| else |
| { |
| if (! set_device (arg)) |
| return 0; |
| } |
| |
| // /* Get the device number. */ |
| // set_device (device); |
| // if (errnum) |
| // return 0; |
| |
| /* Check for the geometry. */ |
| if (get_diskinfo (current_drive, &tmp_geom)) |
| { |
| #ifndef GRUB_UTIL |
| force_geometry_tune = 0; |
| #endif |
| errnum = ERR_NO_DISK; |
| return 0; |
| } |
| #ifndef GRUB_UTIL |
| force_geometry_tune = 0; |
| #endif |
| |
| #ifndef GRUB_UTIL |
| if (sync) |
| { |
| #define BS ((struct master_and_dos_boot_sector *)mbr) |
| |
| /* Read MBR or the floppy boot sector. */ |
| if (! rawread (current_drive, 0, 0, SECTOR_SIZE, (unsigned long long)(unsigned long)mbr, 0xedde0d90)) |
| return 0; |
| |
| if (current_drive == cdrom_drive || (current_drive >= (unsigned char)min_cdrom_id && current_drive < (unsigned char)(min_cdrom_id + atapi_dev_count))) |
| return 1; |
| if (current_drive & 0x80) |
| { |
| unsigned long start_cl, start_ch, start_dh, start_lba[4]; |
| unsigned long end_cl, end_ch, end_dh, end_lba[4]; |
| unsigned long entry1; |
| |
| if (current_drive >= 0x88 || current_drive >= 0x80 + (*(unsigned char *)0x475)) |
| return 1; |
| |
| /* repair partition table. */ |
| |
| for (entry1 = 0; entry1 < 4; entry1++) |
| { |
| /* get absolute starting and ending sector number. */ |
| start_lba[entry1] = PC_SLICE_START (mbr, entry1); |
| end_lba[entry1] = start_lba[entry1] + PC_SLICE_LENGTH (mbr, entry1) - 1; |
| /* skip null entry. */ |
| if (! start_lba[entry1] || ! end_lba[entry1]) |
| continue; |
| /* calculate the new CHS starting and ending values. */ |
| lba_to_chs (start_lba[entry1], &start_cl, &start_ch, &start_dh); |
| lba_to_chs (end_lba[entry1], &end_cl, &end_ch, &end_dh); |
| /* update values of the partition table in memory */ |
| PC_SLICE_HEAD (mbr, entry1) = start_dh; |
| PC_SLICE_SEC (mbr, entry1) = start_cl; |
| PC_SLICE_CYL (mbr, entry1) = start_ch; |
| PC_SLICE_EHEAD (mbr, entry1) = end_dh; |
| PC_SLICE_ESEC (mbr, entry1) = end_cl; |
| PC_SLICE_ECYL (mbr, entry1) = end_ch; |
| } |
| if (debug > 0) |
| grub_printf ("Writing MBR for drive 0x%X ... ", current_drive); |
| /* Write back/update the MBR. */ |
| if (! rawwrite (current_drive, 0, mbr)) |
| { |
| if (debug > 0) |
| grub_printf ("failure.\n"); |
| return 0; |
| } else { |
| if (debug > 0) |
| grub_printf ("success.\n"); |
| } |
| |
| /* repair BPB of each primary partition. */ |
| |
| for (entry1 = 0; entry1 < 4; entry1++) |
| { |
| /* skip null entry. */ |
| if (! start_lba[entry1] || ! end_lba[entry1]) |
| continue; |
| /* Read the first sector of the partition. */ |
| if (! rawread (current_drive, start_lba[entry1], 0, SECTOR_SIZE, (unsigned long long)(unsigned long)mbr, 0xedde0d90)) |
| continue; /* on read failure, try next entry */ |
| |
| /* try to find out the filesystem type */ |
| if (BS->boot_signature == 0xAA55 && ! probe_bpb(BS) && filesystem_type > 0) |
| { |
| if (BS->total_heads != tmp_geom.heads || BS->sectors_per_track != tmp_geom.sectors) |
| { |
| if (debug > 0) |
| grub_printf ("(hd%d,%d): Changing H/S=%d/%d to H/S=%d/%d ... ", (current_drive & 0x7F), entry1, BS->total_heads, BS->sectors_per_track, tmp_geom.heads, tmp_geom.sectors); |
| BS->total_heads = tmp_geom.heads; |
| BS->sectors_per_track = tmp_geom.sectors; |
| |
| /* Write back/update the floppy boot sector. */ |
| if (! rawwrite (current_drive, start_lba[entry1], mbr)) |
| { |
| if (debug > 0) |
| grub_printf ("failure.\n"); |
| return 0; |
| } else { |
| if (debug > 0) |
| grub_printf ("success.\n"); |
| } |
| } |
| } |
| } |
| } |
| else |
| { |
| if (current_drive >= 2) |
| return 1; |
| |
| /* repair floppy BPB */ |
| |
| /* try to find out the filesystem type */ |
| if (BS->boot_signature == 0xAA55 && ! probe_bpb(BS) && filesystem_type > 0) |
| { |
| if (BS->total_heads != tmp_geom.heads || BS->sectors_per_track != tmp_geom.sectors) |
| { |
| if (debug > 0) |
| grub_printf ("Floppy %d: Changing H/S=%d/%d to H/S=%d/%d ... ", current_drive, BS->total_heads, BS->sectors_per_track, tmp_geom.heads, tmp_geom.sectors); |
| BS->total_heads = tmp_geom.heads; |
| BS->sectors_per_track = tmp_geom.sectors; |
| |
| /* Write back/update the floppy boot sector. */ |
| if (! rawwrite (current_drive, 0, mbr)) |
| { |
| if (debug > 0) |
| grub_printf ("failure.\n"); |
| return 0; |
| } else { |
| if (debug > 0) |
| grub_printf ("success.\n"); |
| } |
| } |
| } |
| } |
| return 1; |
| #undef BS |
| } |
| #endif |
| |
| #if 0 |
| /* The situation described as follows should never occur. So comment |
| * out. Another reason to comment out: the SCRATCHSEG has only 512 |
| * byte room and it cannot hold a large 2048-byte cdrom sector. |
| * |
| * Commented out 2008-09-30 by Tinybit. |
| */ |
| |
| /* Attempt to read the first sector, because some BIOSes turns out not |
| to support LBA even though they set the bit 0 in the support |
| bitmap, only after reading something actually. */ |
| #ifdef GRUB_UTIL |
| if (current_drive != cdrom_drive) |
| #else |
| if (current_drive != cdrom_drive && (current_drive < (unsigned char)min_cdrom_id || current_drive >= (unsigned char)(min_cdrom_id + atapi_dev_count))) |
| #endif /* GRUB_UTIL */ |
| { |
| if (biosdisk (BIOSDISK_READ, current_drive, &tmp_geom, 0, 1, SCRATCHSEG)) |
| { |
| if (debug > 1) |
| printf("biosdisk read first sector of drive 0x%X: failure! errnum=%d\n", current_drive, errnum); |
| errnum = 0; |
| // errnum = ERR_READ; |
| // return 0; |
| } |
| } |
| #endif |
| |
| #ifdef GRUB_UTIL |
| arg/*ptr*/ = skip_to (0, arg/*device*/); |
| if (*arg/*ptr*/) |
| { |
| char *cylinder, *head, *sector, *total_sector; |
| unsigned long long num_cylinder, num_head, num_sector, num_total_sector; |
| |
| cylinder = arg/*ptr*/; |
| head = skip_to (0, cylinder); |
| sector = skip_to (0, head); |
| total_sector = skip_to (0, sector); |
| if (! safe_parse_maxint (&cylinder, &num_cylinder) |
| || ! safe_parse_maxint (&head, &num_head) |
| || ! safe_parse_maxint (§or, &num_sector)) |
| return 0; |
| |
| disks[current_drive].cylinders = num_cylinder; |
| disks[current_drive].heads = num_head; |
| disks[current_drive].sectors = num_sector; |
| |
| if (safe_parse_maxint (&total_sector, &num_total_sector)) |
| disks[current_drive].total_sectors = num_total_sector; |
| else |
| disks[current_drive].total_sectors |
| = num_cylinder * num_head * num_sector; |
| errnum = 0; |
| |
| tmp_geom = disks[current_drive]; |
| buf_drive = -1; |
| } |
| #endif /* GRUB_UTIL */ |
| |
| #ifdef GRUB_UTIL |
| msg = device_map[current_drive]; |
| #else |
| if (tmp_geom.flags & BIOSDISK_FLAG_BIFURCATE) |
| msg = "BIF"; |
| else if (tmp_geom.flags & BIOSDISK_FLAG_LBA_EXTENSION) |
| msg = "LBA"; |
| else |
| msg = "CHS"; |
| #endif |
| |
| grub_printf ("drive 0x%02X(%s): C/H/S=%d/%d/%d, Sector Count/Size=%ld/%d\n", |
| current_drive, msg, |
| tmp_geom.cylinders, tmp_geom.heads, tmp_geom.sectors, |
| (unsigned long long)tmp_geom.total_sectors, tmp_geom.sector_size); |
| #ifdef GRUB_UTIL |
| if (current_drive != cdrom_drive) |
| #else |
| if (current_drive != cdrom_drive && (current_drive < (unsigned char)min_cdrom_id || current_drive >= (unsigned char)(min_cdrom_id + atapi_dev_count))) |
| #endif /* GRUB_UTIL */ |
| if (current_drive & 0x80) |
| real_open_partition (1); |
| |
| return 1; |
| } |
| |
| static struct builtin builtin_geometry = |
| { |
| "geometry", |
| geometry_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| #ifdef GRUB_UTIL |
| "geometry [DRIVE] [CYLINDER HEAD SECTOR [TOTAL_SECTOR]]", |
| "Print the information for drive DRIVE or the current root device if DRIVE" |
| " is not specified. In the grub shell, you can" |
| " set the geometry of the drive arbitrarily. The number of the cylinders," |
| " the one of the heads, the one of the sectors and the one of the total" |
| " sectors are set to CYLINDER, HEAD, SECTOR and TOTAL_SECTOR," |
| " respectively. If you omit TOTAL_SECTOR, then it will be calculated based" |
| " on the C/H/S values automatically." |
| #else |
| "geometry [--tune] [--sync] [DRIVE]", |
| "Print the information for drive DRIVE or the current root device if DRIVE" |
| " is not specified. If --tune is specified, the geometry will change to the" |
| " tuned value. If --sync is specified, the C/H/S values in partition table" |
| " of DRIVE and H/S values in BPB of each primary partition of DRIVE" |
| "(or BPB of floppy DRIVE) will be updated according to the current" |
| " geometry of DRIVE in use." |
| #endif /* GRUB_UTIL */ |
| }; |
| |
| |
| /* halt */ |
| static int |
| halt_func (char *arg, int flags) |
| { |
| int no_apm; |
| |
| no_apm = (grub_memcmp (arg, "--no-apm", 8) == 0); |
| grub_halt (no_apm); |
| |
| /* Never reach here. */ |
| return 0; |
| } |
| |
| static struct builtin builtin_halt = |
| { |
| "halt", |
| halt_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST | BUILTIN_BOOTING, |
| "halt [--no-apm]", |
| "Halt your system. If APM is avaiable on it, turn off the power using" |
| " the APM BIOS, unless you specify the option `--no-apm'." |
| }; |
| |
| |
| /* help */ |
| #define MAX_SHORT_DOC_LEN 39 |
| #define MAX_LONG_DOC_LEN 72 |
| |
| static int |
| help_func (char *arg, int flags) |
| { |
| int all = 0; |
| |
| if (grub_memcmp (arg, "--all", sizeof ("--all") - 1) == 0) |
| { |
| all = 1; |
| arg = skip_to (0, arg); |
| } |
| |
| if (! *arg) |
| { |
| /* Invoked with no argument. Print the list of the short docs. */ |
| struct builtin **builtin; |
| int left = 1; |
| |
| for (builtin = builtin_table; *builtin != 0; builtin++) |
| { |
| int len; |
| int i; |
| |
| /* If this cannot be used in the command-line interface, |
| skip this. */ |
| if (! ((*builtin)->flags & BUILTIN_CMDLINE)) |
| continue; |
| |
| /* If this doesn't need to be listed automatically and "--all" |
| is not specified, skip this. */ |
| if (! all && ! ((*builtin)->flags & BUILTIN_HELP_LIST)) |
| continue; |
| |
| len = grub_strlen ((*builtin)->short_doc); |
| /* If the length of SHORT_DOC is too long, truncate it. */ |
| if (len > MAX_SHORT_DOC_LEN - 1) |
| len = MAX_SHORT_DOC_LEN - 1; |
| |
| for (i = 0; i < len; i++) |
| grub_putchar ((*builtin)->short_doc[i]); |
| |
| for (; i < MAX_SHORT_DOC_LEN; i++) |
| grub_putchar (' '); |
| |
| if (! left) |
| grub_putchar ('\n'); |
| |
| left = ! left; |
| } |
| |
| /* If the last entry was at the left column, no newline was printed |
| at the end. */ |
| if (! left) |
| grub_putchar ('\n'); |
| } |
| else |
| { |
| /* Invoked with one or more patterns. */ |
| do |
| { |
| struct builtin **builtin; |
| char *next_arg; |
| |
| /* Get the next argument. */ |
| next_arg = skip_to (0, arg); |
| |
| /* Terminate ARG. */ |
| nul_terminate (arg); |
| |
| for (builtin = builtin_table; *builtin; builtin++) |
| { |
| /* Skip this if this is only for the configuration file. */ |
| if (! ((*builtin)->flags & BUILTIN_CMDLINE)) |
| continue; |
| |
| if (substring (arg, (*builtin)->name, 0) < 1) |
| { |
| char *doc = (*builtin)->long_doc; |
| |
| /* At first, print the name and the short doc. */ |
| grub_printf ("%s: %s\n", |
| (*builtin)->name, (*builtin)->short_doc); |
| |
| /* Print the long doc. */ |
| while (*doc) |
| { |
| int len = grub_strlen (doc); |
| int i; |
| |
| /* If LEN is too long, fold DOC. */ |
| if (len > MAX_LONG_DOC_LEN) |
| { |
| /* Fold this line at the position of a space. */ |
| for (len = MAX_LONG_DOC_LEN; len > 0; len--) |
| if (doc[len - 1] == ' ') |
| break; |
| } |
| |
| grub_printf (" "); |
| for (i = 0; i < len; i++) |
| grub_putchar (*doc++); |
| grub_putchar ('\n'); |
| } |
| } |
| } |
| |
| arg = next_arg; |
| } |
| while (*arg); |
| } |
| |
| return 1; |
| } |
| |
| static struct builtin builtin_help = |
| { |
| "help", |
| help_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "help [--all] [PATTERN ...]", |
| "Display helpful information about builtin commands. Not all commands" |
| " aren't shown without the option `--all'." |
| }; |
| |
| |
| /* hiddenmenu */ |
| static int |
| hiddenmenu_func (char *arg, int flags) |
| { |
| show_menu = 0; |
| |
| while (*arg) |
| { |
| if (grub_memcmp (arg, "--silent", 8) == 0) |
| { |
| silent_hiddenmenu = 1; |
| } |
| else if (grub_memcmp (arg, "--off", 5) == 0) |
| { |
| /* set to the default values. */ |
| show_menu = 1; |
| silent_hiddenmenu = 0; |
| } |
| arg = skip_to (0, arg); |
| } |
| |
| return 1; |
| } |
| |
| static struct builtin builtin_hiddenmenu = |
| { |
| "hiddenmenu", |
| hiddenmenu_func, |
| BUILTIN_MENU, |
| #if 0 |
| "hiddenmenu [--silent]", |
| "Hide the menu." |
| #endif |
| }; |
| |
| |
| /* hide */ |
| static int |
| hide_func (char *arg, int flags) |
| { |
| /* If no arguments, hide current partition in the current drive. */ |
| if (! *arg || *arg == ' ' || *arg == '\t') |
| { |
| current_drive = saved_drive; |
| current_partition = saved_partition; |
| } |
| else if (! set_device (arg)) |
| return 0; |
| |
| return set_partition_hidden_flag (1); |
| } |
| |
| static struct builtin builtin_hide = |
| { |
| "hide", |
| hide_func, |
| BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_MENU | BUILTIN_HELP_LIST, |
| "hide [PARTITION]", |
| "Hide PARTITION by setting the \"hidden\" bit in" |
| " its partition type code. The default partition is the current" |
| " root device." |
| }; |
| |
| |
| /* hiddenflag [--set | --clear] [PARTITION] */ |
| static int |
| hiddenflag_func (char *arg, int flags) |
| { |
| int hidden = -1; /* -1 for status report */ |
| |
| for (;;) |
| { |
| if (grub_memcmp (arg, "--set", 5) == 0) |
| { |
| hidden = 1; |
| } |
| else if (grub_memcmp (arg, "--clear", 7) == 0) |
| { |
| hidden = 0; |
| } |
| else |
| break; |
| arg = skip_to (0, arg); |
| } |
| |
| if (! *arg || *arg == ' ' || *arg == '\t') |
| { |
| current_drive = saved_drive; |
| current_partition = saved_partition; |
| } |
| else if (! set_device (arg)) |
| return 0; |
| |
| return set_partition_hidden_flag (hidden); |
| } |
| |
| static struct builtin builtin_hiddenflag = |
| { |
| "hiddenflag", |
| hiddenflag_func, |
| BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_MENU | BUILTIN_HELP_LIST, |
| "hiddenflag [--set | --clear] [PARTITION]", |
| "Hide/unhide PARTITION by setting/clearing the \"hidden\" bit in" |
| " its partition type code, or report the hidden status." |
| " The default partition is the current root device." |
| }; |
| |
| |
| #ifdef SUPPORT_NETBOOT |
| /* ifconfig */ |
| static int |
| ifconfig_func (char *arg, int flags) |
| { |
| char *svr = 0, *ip = 0, *gw = 0, *sm = 0; |
| |
| if (! eth_probe ()) |
| { |
| grub_printf ("No ethernet card found.\n"); |
| errnum = ERR_DEV_VALUES; |
| return 0; |
| } |
| |
| while (*arg) |
| { |
| if (! grub_memcmp ("--server=", arg, sizeof ("--server=") - 1)) |
| svr = arg + sizeof("--server=") - 1; |
| else if (! grub_memcmp ("--address=", arg, sizeof ("--address=") - 1)) |
| ip = arg + sizeof ("--address=") - 1; |
| else if (! grub_memcmp ("--gateway=", arg, sizeof ("--gateway=") - 1)) |
| gw = arg + sizeof ("--gateway=") - 1; |
| else if (! grub_memcmp ("--mask=", arg, sizeof("--mask=") - 1)) |
| sm = arg + sizeof ("--mask=") - 1; |
| else |
| { |
| errnum = ERR_BAD_ARGUMENT; |
| return 0; |
| } |
| |
| arg = skip_to (0, arg); |
| } |
| |
| if (! ifconfig (ip, sm, gw, svr)) |
| { |
| errnum = ERR_BAD_ARGUMENT; |
| return 0; |
| } |
| |
| print_network_configuration (); |
| return 1; |
| } |
| |
| static struct builtin builtin_ifconfig = |
| { |
| "ifconfig", |
| ifconfig_func, |
| BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_MENU | BUILTIN_HELP_LIST, |
| "ifconfig [--address=IP] [--gateway=IP] [--mask=MASK] [--server=IP]", |
| "Configure the IP address, the netmask, the gateway and the server" |
| " address or print current network configuration." |
| }; |
| #endif /* SUPPORT_NETBOOT */ |
| |
| |
| #if 0 |
| /* impsprobe */ |
| static int |
| impsprobe_func (char *arg, int flags) |
| { |
| #ifdef GRUB_UTIL |
| /* In the grub shell, we cannot probe IMPS. */ |
| errnum = ERR_UNRECOGNIZED; |
| return 0; |
| #else /* ! GRUB_UTIL */ |
| if (!imps_probe ()) |
| { |
| if (debug > 0) |
| printf (" No MPS information found or probe failed\n"); |
| return 0; |
| } |
| |
| return 1; |
| #endif /* ! GRUB_UTIL */ |
| } |
| |
| static struct builtin builtin_impsprobe = |
| { |
| "impsprobe", |
| impsprobe_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT, |
| "impsprobe", |
| "Probe the Intel Multiprocessor Specification 1.1 or 1.4" |
| " configuration table and boot the various CPUs which are found into" |
| " a tight loop." |
| }; |
| #endif |
| |
| |
| /* initrd */ |
| static int |
| initrd_func (char *arg, int flags) |
| { |
| switch (kernel_type) |
| { |
| case KERNEL_TYPE_LINUX: |
| case KERNEL_TYPE_BIG_LINUX: |
| if (! load_initrd (arg)) |
| return 0; |
| break; |
| |
| default: |
| errnum = ERR_NEED_LX_KERNEL; |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| static struct builtin builtin_initrd = |
| { |
| "initrd", |
| initrd_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "initrd FILE [FILE ...]", |
| "Load an initial ramdisk FILE for a Linux format boot image and set the" |
| " appropriate parameters in the Linux setup area in memory. For Linux" |
| " 2.6+ kernels, multiple cpio files can be loaded." |
| }; |
| |
| |
| #ifdef GRUB_UTIL |
| //#ifdef GRUB_UTIL |
| //#define installaddr (*(unsigned long *)RAW_ADDR (0x100000)) |
| //#define installlist (*(unsigned long *)RAW_ADDR (0x100004)) |
| //#define stage2_first_buffer (*(char **)RAW_ADDR (0x100008)) |
| //#else |
| static unsigned long installaddr, installlist; |
| static char *stage2_first_buffer; |
| //#endif |
| static void disk_read_blocklist_func1 (unsigned long sector, unsigned long offset, unsigned long length); |
| |
| /* Write SECTOR to INSTALLLIST, and update INSTALLADDR and |
| INSTALLSECT. */ |
| static void |
| disk_read_blocklist_func1 (unsigned long sector, unsigned long offset, unsigned long length) |
| { |
| if (((unsigned long)debug) >= 0x7FFFFFFF) |
| printf("[%d]", sector); |
| |
| if (offset != 0 || blklst_last_length != SECTOR_SIZE) |
| { |
| /* We found a non-sector-aligned data block. */ |
| errnum = ERR_UNALIGNED; |
| return; |
| } |
| |
| blklst_last_length = length; |
| |
| if (*((unsigned long *) (installlist - 4)) |
| + *((unsigned short *) installlist) != sector |
| || installlist == (unsigned long) stage2_first_buffer + SECTOR_SIZE + 4) |
| { |
| installlist -= 8; |
| |
| if (*((unsigned long *) (installlist - 8))) |
| errnum = ERR_WONT_FIT; |
| else |
| { |
| *((unsigned short *) (installlist + 2)) = (installaddr >> 4); |
| *((unsigned long *) (installlist - 4)) = sector; |
| } |
| } |
| |
| *((unsigned short *) installlist) += 1; |
| installaddr += 512; |
| } |
| |
| //#ifdef GRUB_UTIL |
| //#define saved_sector (*(unsigned long *)RAW_ADDR (0x10000C)) |
| //#else |
| static unsigned long saved_sector; |
| //#endif |
| static void disk_read_savesect_func (unsigned long sector, unsigned long offset, unsigned long length); |
| |
| /* Save the first sector of Stage2 in STAGE2_SECT. */ |
| static void |
| disk_read_savesect_func (unsigned long sector, unsigned long offset, unsigned long length) |
| { |
| if (((unsigned long)debug) >= 0x7FFFFFFF) |
| printf ("[%d]", sector); |
| |
| /* ReiserFS has files which sometimes contain data not aligned |
| on sector boundaries. Returning an error is better than |
| silently failing. */ |
| if (offset != 0 || length != SECTOR_SIZE) |
| errnum = ERR_UNALIGNED; |
| |
| saved_sector = sector; |
| } |
| |
| /* install */ |
| static int |
| install_func (char *arg, int flags) |
| { |
| char *stage1_file, *dest_dev, *file, *addr; |
| char *stage1_buffer = (char *) RAW_ADDR (0x100200); |
| char *stage2_buffer = stage1_buffer + SECTOR_SIZE; |
| char *old_sect = stage2_buffer + SECTOR_SIZE; |
| char *stage2_second_buffer; |
| /* XXX: Probably SECTOR_SIZE is reasonable. */ |
| char *config_filename; |
| char *dummy; |
| unsigned long new_drive = GRUB_INVALID_DRIVE; |
| unsigned long dest_drive; |
| unsigned long dest_partition; |
| unsigned long dest_sector; |
| unsigned long src_drive, src_partition, src_part_start; |
| unsigned long i; |
| //struct geometry dest_geom, src_geom; |
| unsigned long stage2_first_sector, stage2_second_sector; |
| char *ptr; |
| /* Point to the location of the name of a configuration file in Stage 2. */ |
| char *config_file_location; |
| /* If FILE is a Stage 1.5? */ |
| int is_stage1_5 = 0; |
| /* Must call grub_close? */ |
| int is_open = 0; |
| /* If LBA is forced? */ |
| int is_force_lba = 0; |
| #ifndef NO_DECOMPRESSION |
| int no_decompression_bak = no_decompression; |
| #endif |
| /* Was the last sector full? */ |
| blklst_last_length = SECTOR_SIZE; |
| |
| stage2_first_buffer = old_sect + SECTOR_SIZE; |
| stage2_second_buffer = stage2_first_buffer + SECTOR_SIZE; |
| config_filename = stage2_second_buffer + SECTOR_SIZE; |
| dummy = config_filename + SECTOR_SIZE; |
| |
| #ifdef GRUB_UTIL |
| /* If the Stage 2 is in a partition mounted by an OS, this will store |
| the filename under the OS. */ |
| char *stage2_os_file = 0; |
| #endif /* GRUB_UTIL */ |
| |
| /* First, check the GNU-style long option. */ |
| while (1) |
| { |
| if (grub_memcmp ("--force-lba", arg, sizeof ("--force-lba") - 1) == 0) |
| { |
| is_force_lba = 1; |
| arg = skip_to (0, arg); |
| } |
| #ifdef GRUB_UTIL |
| else if (grub_memcmp ("--stage2=", arg, sizeof ("--stage2=") - 1) == 0) |
| { |
| stage2_os_file = arg + sizeof ("--stage2=") - 1; |
| arg = skip_to (0, arg); |
| nul_terminate (stage2_os_file); |
| } |
| #endif /* GRUB_UTIL */ |
| else |
| break; |
| } |
| |
| stage1_file = arg; |
| dest_dev = skip_to (0, stage1_file); |
| if (*dest_dev == 'd') |
| { |
| new_drive = 0; |
| dest_dev = skip_to (0, dest_dev); |
| } |
| file = skip_to (0, dest_dev); |
| addr = skip_to (0, file); |
| |
| /* Get the installation address. */ |
| { |
| unsigned long long ull; |
| if (! safe_parse_maxint (&addr, &ull)) |
| { |
| /* ADDR is not specified. */ |
| installaddr = 0; |
| ptr = addr; |
| errnum = 0; |
| } |
| else |
| { |
| installaddr = ull; |
| ptr = skip_to (0, addr); |
| } |
| } |
| |
| #ifndef NO_DECOMPRESSION |
| /* Do not decompress Stage 1 or Stage 2. */ |
| no_decompression = 1; |
| #endif |
| |
| /* Read Stage 1. */ |
| is_open = grub_open (stage1_file); |
| if (! is_open |
| || ! grub_read ((unsigned long long)(unsigned int)stage1_buffer, SECTOR_SIZE, 0xedde0d90) == SECTOR_SIZE) |
| goto fail; |
| |
| /* Read the old sector from DEST_DEV. */ |
| if (! set_device (dest_dev) |
| || ! open_partition () |
| || ! devread (0, 0, SECTOR_SIZE, (unsigned long long)(unsigned int)old_sect, 0xedde0d90)) |
| goto fail; |
| |
| /* Store the information for the destination device. */ |
| dest_drive = current_drive; |
| dest_partition = current_partition; |
| //dest_geom = buf_geom; |
| dest_sector = (unsigned long)part_start; |
| |
| /* Copy the possible DOS BPB, 59 bytes at byte offset 3. */ |
| grub_memmove (stage1_buffer + BOOTSEC_BPB_OFFSET, |
| old_sect + BOOTSEC_BPB_OFFSET, |
| BOOTSEC_BPB_LENGTH); |
| |
| /* If for a hard disk, copy the possible MBR/extended part table. */ |
| if (dest_drive & 0x80) |
| grub_memmove (stage1_buffer + STAGE1_WINDOWS_NT_MAGIC, |
| old_sect + STAGE1_WINDOWS_NT_MAGIC, |
| STAGE1_PARTEND - STAGE1_WINDOWS_NT_MAGIC); |
| |
| /* Check for the version and the signature of Stage 1. */ |
| if (*((short *)(stage1_buffer + STAGE1_VER_MAJ_OFFS)) != COMPAT_VERSION |
| || (*((unsigned short *) (stage1_buffer + BOOTSEC_SIG_OFFSET)) |
| != BOOTSEC_SIGNATURE)) |
| { |
| errnum = ERR_BAD_VERSION; |
| goto fail; |
| } |
| |
| /* This below is not true any longer. But should we leave this alone? */ |
| |
| /* If DEST_DRIVE is a floppy, Stage 2 must have the iteration probe |
| routine. */ |
| if (! (dest_drive & 0x80) |
| && (*((unsigned char *) (stage1_buffer + BOOTSEC_PART_OFFSET)) == 0x80 |
| || stage1_buffer[BOOTSEC_PART_OFFSET] == 0)) |
| { |
| errnum = ERR_BAD_VERSION; |
| goto fail; |
| } |
| |
| grub_close (); |
| |
| /* Open Stage 2. */ |
| is_open = grub_open (file); |
| if (! is_open) |
| goto fail; |
| |
| src_drive = current_drive; |
| src_partition = current_partition; |
| src_part_start = (unsigned long)part_start; |
| //src_geom = buf_geom; |
| |
| if (! new_drive) |
| new_drive = src_drive; |
| else if (src_drive != dest_drive) |
| grub_printf ("Warning: the option `d' was not used, but the Stage 1 will" |
| " be installed on a\ndifferent drive than the drive where" |
| " the Stage 2 resides.\n"); |
| |
| /* Set the boot drive. */ |
| *((unsigned char *) (stage1_buffer + STAGE1_BOOT_DRIVE)) = new_drive; |
| |
| /* Set the "force LBA" flag. */ |
| *((unsigned char *) (stage1_buffer + STAGE1_FORCE_LBA)) = is_force_lba; |
| |
| /* If DEST_DRIVE is a hard disk, enable the workaround, which is |
| for buggy BIOSes which don't pass boot drive correctly. Instead, |
| they pass 0x00 or 0x01 even when booted from 0x80. */ |
| if (dest_drive & BIOS_FLAG_FIXED_DISK) |
| /* Replace the jmp (2 bytes) with double nop's. */ |
| *((unsigned short *) (stage1_buffer + STAGE1_BOOT_DRIVE_CHECK)) |
| = 0x9090; |
| |
| /* Read the first sector of Stage 2. */ |
| disk_read_hook = disk_read_savesect_func; |
| if (grub_read ((unsigned long long)(unsigned int)stage2_first_buffer, SECTOR_SIZE, 0xedde0d90) != SECTOR_SIZE) |
| goto fail; |
| |
| stage2_first_sector = saved_sector; |
| |
| /* Read the second sector of Stage 2. */ |
| if (grub_read ((unsigned long long)(unsigned int)stage2_second_buffer, SECTOR_SIZE, 0xedde0d90) != SECTOR_SIZE) |
| goto fail; |
| |
| stage2_second_sector = saved_sector; |
| |
| /* Check for the version of Stage 2. */ |
| if (*((short *) (stage2_second_buffer + STAGE2_VER_MAJ_OFFS)) |
| != COMPAT_VERSION) |
| { |
| errnum = ERR_BAD_VERSION; |
| goto fail; |
| } |
| |
| /* Check for the Stage 2 id. */ |
| if (stage2_second_buffer[STAGE2_STAGE2_ID] != STAGE2_ID_STAGE2) |
| is_stage1_5 = 1; |
| |
| /* If INSTALLADDR is not specified explicitly in the command-line, |
| determine it by the Stage 2 id. */ |
| if (! installaddr) |
| { |
| if (! is_stage1_5) |
| /* Stage 2. */ |
| installaddr = 0x8000; |
| else |
| /* Stage 1.5. */ |
| installaddr = 0x2000; |
| } |
| |
| *((unsigned long *) (stage1_buffer + STAGE1_STAGE2_SECTOR)) |
| = stage2_first_sector; |
| *((unsigned short *) (stage1_buffer + STAGE1_STAGE2_ADDRESS)) |
| = installaddr; |
| *((unsigned short *) (stage1_buffer + STAGE1_STAGE2_SEGMENT)) |
| = installaddr >> 4; |
| |
| i = (unsigned long) stage2_first_buffer + SECTOR_SIZE - 4; |
| while (*((unsigned long *) i)) |
| { |
| if (i < (int) stage2_first_buffer |
| || (*((int *) (i - 4)) & 0x80000000) |
| || *((unsigned short *) i) >= 0xA00 |
| || *((short *) (i + 2)) == 0) |
| { |
| errnum = ERR_BAD_VERSION; |
| goto fail; |
| } |
| |
| *((int *) i) = 0; |
| *((int *) (i - 4)) = 0; |
| i -= 8; |
| } |
| |
| installlist = (int) stage2_first_buffer + SECTOR_SIZE + 4; |
| installaddr += SECTOR_SIZE; |
| |
| /* Read the whole of Stage2 except for the first sector. */ |
| filepos = SECTOR_SIZE; |
| |
| disk_read_hook = disk_read_blocklist_func1; |
| if (! grub_read ((unsigned long long)(unsigned int)dummy, -1ULL, 0xedde0d90)) |
| goto fail; |
| |
| disk_read_hook = 0; |
| |
| /* Find a string for the configuration filename. */ |
| config_file_location = stage2_second_buffer + STAGE2_VER_STR_OFFS; |
| while (*(config_file_location++)) |
| ; |
| |
| /* Set the "force LBA" flag for Stage2. */ |
| *((unsigned char *) (stage2_second_buffer + STAGE2_FORCE_LBA)) |
| = is_force_lba; |
| |
| if (*ptr == 'p') |
| { |
| *((long *) (stage2_second_buffer + STAGE2_INSTALLPART)) |
| = src_partition; |
| if (is_stage1_5) |
| { |
| /* Reset the device information in FILE if it is a Stage 1.5. */ |
| unsigned long device = 0xFFFFFFFF; |
| |
| grub_memmove (config_file_location, (char *) &device, |
| sizeof (device)); |
| } |
| |
| ptr = skip_to (0, ptr); |
| } |
| |
| if (*ptr) |
| { |
| grub_strcpy (config_filename, ptr); |
| nul_terminate (config_filename); |
| |
| if (! is_stage1_5) |
| /* If it is a Stage 2, just copy PTR to CONFIG_FILE_LOCATION. */ |
| grub_strcpy (config_file_location, ptr); |
| else |
| { |
| char *real_config; |
| unsigned long device; |
| |
| /* Translate the external device syntax to the internal device |
| syntax. */ |
| if (! (real_config = set_device (ptr))) |
| { |
| /* The Stage 2 PTR does not contain the device name, so |
| use the root device instead. */ |
| errnum = ERR_NONE; |
| current_drive = saved_drive; |
| current_partition = saved_partition; |
| real_config = ptr; |
| } |
| |
| if (current_drive == src_drive) |
| { |
| /* If the drive where the Stage 2 resides is the same as |
| the one where the Stage 1.5 resides, do not embed the |
| drive number. */ |
| current_drive = GRUB_INVALID_DRIVE; |
| } |
| |
| device = (current_drive << 24) | current_partition; |
| grub_memmove (config_file_location, (char *) &device, |
| sizeof (device)); |
| grub_strcpy (config_file_location + sizeof (device), |
| real_config); |
| } |
| |
| /* If a Stage 1.5 is used, then we need to modify the Stage2. */ |
| if (is_stage1_5) |
| { |
| char *real_config_filename = skip_to (0, ptr); |
| |
| is_open = grub_open (config_filename); |
| if (! is_open) |
| goto fail; |
| |
| /* Skip the first sector. */ |
| filepos = SECTOR_SIZE; |
| |
| disk_read_hook = disk_read_savesect_func; |
| if (grub_read ((unsigned long long)(unsigned int)stage2_buffer, SECTOR_SIZE, 0xedde0d90) != SECTOR_SIZE) |
| goto fail; |
| |
| disk_read_hook = 0; |
| grub_close (); |
| is_open = 0; |
| |
| /* Sanity check. */ |
| if (*(stage2_buffer + STAGE2_STAGE2_ID) != STAGE2_ID_STAGE2) |
| { |
| errnum = ERR_BAD_VERSION; |
| goto fail; |
| } |
| |
| /* Set the "force LBA" flag for Stage2. */ |
| *(stage2_buffer + STAGE2_FORCE_LBA) = is_force_lba; |
| |
| /* If REAL_CONFIG_FILENAME is specified, copy it to the Stage2. */ |
| if (*real_config_filename) |
| { |
| /* Specified */ |
| char *location; |
| |
| /* Find a string for the configuration filename. */ |
| location = stage2_buffer + STAGE2_VER_STR_OFFS; |
| while (*(location++)) |
| ; |
| |
| /* Copy the name. */ |
| grub_strcpy (location, real_config_filename); |
| } |
| |
| /* Write it to the disk. */ |
| buf_track = -1; |
| |
| #ifdef GRUB_UTIL |
| /* In the grub shell, access the Stage 2 via the OS filesystem |
| service, if possible. */ |
| if (stage2_os_file) |
| { |
| FILE *fp; |
| |
| fp = fopen (stage2_os_file, "r+"); |
| if (! fp) |
| { |
| errnum = ERR_FILE_NOT_FOUND; |
| goto fail; |
| } |
| |
| if (fseek (fp, SECTOR_SIZE, SEEK_SET) != 0) |
| { |
| fclose (fp); |
| errnum = ERR_BAD_VERSION; |
| goto fail; |
| } |
| |
| if (fwrite (stage2_buffer, 1, SECTOR_SIZE, fp) |
| != SECTOR_SIZE) |
| { |
| fclose (fp); |
| errnum = ERR_WRITE; |
| goto fail; |
| } |
| |
| fclose (fp); |
| } |
| else |
| #endif /* GRUB_UTIL */ |
| { |
| if (! devwrite ((unsigned long)(saved_sector - part_start), 1, stage2_buffer)) |
| goto fail; |
| } |
| } |
| } |
| |
| /* Clear the cache. */ |
| buf_track = -1; |
| |
| /* Write the modified sectors of Stage2 to the disk. */ |
| #ifdef GRUB_UTIL |
| if (! is_stage1_5 && stage2_os_file) |
| { |
| FILE *fp; |
| |
| fp = fopen (stage2_os_file, "r+"); |
| if (! fp) |
| { |
| errnum = ERR_FILE_NOT_FOUND; |
| goto fail; |
| } |
| |
| if (fwrite (stage2_first_buffer, 1, SECTOR_SIZE, fp) != SECTOR_SIZE) |
| { |
| fclose (fp); |
| errnum = ERR_WRITE; |
| goto fail; |
| } |
| |
| if (fwrite (stage2_second_buffer, 1, SECTOR_SIZE, fp) != SECTOR_SIZE) |
| { |
| fclose (fp); |
| errnum = ERR_WRITE; |
| goto fail; |
| } |
| |
| fclose (fp); |
| } |
| else |
| #endif /* GRUB_UTIL */ |
| { |
| /* The first. */ |
| current_drive = src_drive; |
| current_partition = src_partition; |
| |
| if (! open_partition ()) |
| goto fail; |
| |
| if (! devwrite (stage2_first_sector - src_part_start, 1, |
| stage2_first_buffer)) |
| goto fail; |
| |
| if (! devwrite (stage2_second_sector - src_part_start, 1, |
| stage2_second_buffer)) |
| goto fail; |
| } |
| |
| /* Write the modified sector of Stage 1 to the disk. */ |
| current_drive = dest_drive; |
| current_partition = dest_partition; |
| if (! open_partition ()) |
| goto fail; |
| |
| devwrite (0, 1, stage1_buffer); |
| |
| fail: |
| if (is_open) |
| grub_close (); |
| |
| disk_read_hook = 0; |
| |
| #ifndef NO_DECOMPRESSION |
| no_decompression = no_decompression_bak; |
| #endif |
| |
| // if (debug > 0) |
| // grub_printf ("\n\nNotice: the two commands SETUP and INSTALL will be removed soon! Please use the\nOS utility of BOOTLACE.COM to install GRLDR boot record to the MBR or to the\nboot area of a specified partition.\n\n"); |
| return ! errnum; |
| } |
| |
| static struct builtin builtin_install = |
| { |
| "install", |
| install_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST | BUILTIN_BOOTING, |
| "install [--stage2=STAGE2_FILE] [--force-lba] STAGE1 [d] DEVICE\n STAGE2 [ADDR] [p] [CONFIG_FILE] [REAL_CONFIG_FILE]", |
| "Install STAGE1 on DEVICE, and install a blocklist for loading STAGE2" |
| " as a Stage 2. If the option `d' is present, the Stage 1 will always" |
| " look for the disk where STAGE2 was installed, rather than using" |
| " the booting drive. The Stage 2 will be loaded at address ADDR, which" |
| " will be determined automatically if you don't specify it. If" |
| " the option `p' or CONFIG_FILE is present, then the first block" |
| " of Stage 2 is patched with new values of the partition and name" |
| " of the configuration file used by the true Stage 2 (for a Stage 1.5," |
| " this is the name of the true Stage 2) at boot time. If STAGE2 is a Stage" |
| " 1.5 and REAL_CONFIG_FILE is present, then the Stage 2 CONFIG_FILE is" |
| " patched with the configuration filename REAL_CONFIG_FILE." |
| " If the option `--force-lba' is specified, disable some sanity checks" |
| " for LBA mode. If the option `--stage2' is specified, rewrite the Stage" |
| " 2 via your OS's filesystem instead of the raw device." |
| }; |
| #endif /* GRUB_UTIL */ |
| |
| |
| /* is64bit */ |
| static int |
| is64bit_func (char *arg, int flags) |
| { |
| return is64bit; |
| } |
| |
| static struct builtin builtin_is64bit = |
| { |
| "is64bit", |
| is64bit_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "is64bit", |
| "Return true if CPU is 64-bit and false if not." |
| }; |
| |
| |
| /* kernel */ |
| static int |
| kernel_func (char *arg, int flags) |
| { |
| int len; |
| kernel_t suggested_type = KERNEL_TYPE_NONE; |
| unsigned long load_flags = 0; |
| |
| #ifndef AUTO_LINUX_MEM_OPT |
| load_flags |= KERNEL_LOAD_NO_MEM_OPTION; |
| #endif |
| |
| /* Deal with GNU-style long options. */ |
| while (1) |
| { |
| /* If the option `--type=TYPE' is specified, convert the string to |
| a kernel type. */ |
| if (grub_memcmp (arg, "--type=", 7) == 0) |
| { |
| arg += 7; |
| |
| if (grub_memcmp (arg, "netbsd", 6) == 0) |
| suggested_type = KERNEL_TYPE_NETBSD; |
| else if (grub_memcmp (arg, "freebsd", 7) == 0) |
| suggested_type = KERNEL_TYPE_FREEBSD; |
| else if (grub_memcmp (arg, "openbsd", 7) == 0) |
| /* XXX: For now, OpenBSD is identical to NetBSD, from GRUB's |
| point of view. */ |
| suggested_type = KERNEL_TYPE_NETBSD; |
| else if (grub_memcmp (arg, "linux", 5) == 0) |
| suggested_type = KERNEL_TYPE_LINUX; |
| else if (grub_memcmp (arg, "biglinux", 8) == 0) |
| suggested_type = KERNEL_TYPE_BIG_LINUX; |
| else if (grub_memcmp (arg, "multiboot", 9) == 0) |
| suggested_type = KERNEL_TYPE_MULTIBOOT; |
| else |
| { |
| errnum = ERR_BAD_ARGUMENT; |
| return 0; |
| } |
| } |
| /* If the `--no-mem-option' is specified, don't pass a Linux's mem |
| option automatically. If the kernel is another type, this flag |
| has no effect. */ |
| else if (grub_memcmp (arg, "--no-mem-option", 15) == 0) |
| load_flags |= KERNEL_LOAD_NO_MEM_OPTION; |
| else |
| break; |
| |
| /* Try the next. */ |
| arg = skip_to (0, arg); |
| } |
| |
| len = grub_strlen (arg) + grub_strlen (kernel_option_video); |
| |
| /* Reset MB_CMDLINE. */ |
| mb_cmdline = (char *) MB_CMDLINE_BUF; |
| if (len + 1 > MB_CMDLINE_BUFLEN) |
| { |
| errnum = ERR_WONT_FIT; |
| return 0; |
| } |
| |
| /* Copy the command-line to MB_CMDLINE and append the kernel_option_video |
| * which might have been set by `setvbe'. |
| */ |
| grub_sprintf (mb_cmdline, "%s%s", arg, kernel_option_video); |
| |
| suggested_type = load_image (arg, mb_cmdline, suggested_type, load_flags); |
| if (suggested_type == KERNEL_TYPE_NONE) |
| return 0; |
| |
| kernel_type = suggested_type; |
| mb_cmdline += len + 1; |
| return 1; |
| } |
| |
| static struct builtin builtin_kernel = |
| { |
| "kernel", |
| kernel_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST | BUILTIN_BOOTING, |
| "kernel [--no-mem-option] [--type=TYPE] FILE [ARG ...]", |
| "Attempt to load the primary boot image from FILE. The rest of the" |
| " line is passed verbatim as the \"kernel command line\". Any modules" |
| " must be reloaded after using this command. The option --type is used" |
| " to suggest what type of kernel to be loaded. TYPE must be either of" |
| " \"netbsd\", \"freebsd\", \"openbsd\", \"linux\", \"biglinux\" and" |
| " \"multiboot\". The option --no-mem-option tells GRUB not to pass a" |
| " Linux's mem option automatically." |
| }; |
| |
| |
| /* lock */ |
| static int |
| lock_func (char *arg, int flags) |
| { |
| if (! auth && password) |
| { |
| errnum = ERR_PRIVILEGED; |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| static struct builtin builtin_lock = |
| { |
| "lock", |
| lock_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "lock", |
| "Break a command execution unless the user is authenticated." |
| }; |
| |
| |
| #ifndef STAGE1_5 |
| /* ls */ |
| static int |
| ls_func (char *arg, int flags) |
| { |
| /* If no arguments, list root dir of current root device. */ |
| if (! *arg || *arg == ' ' || *arg == '\t') |
| { |
| return dir ("/"); |
| } |
| |
| return dir (arg); |
| } |
| |
| static struct builtin builtin_ls = |
| { |
| "ls", |
| ls_func, |
| BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_MENU | BUILTIN_HELP_LIST, |
| "ls [FILE_OR_DIR]", |
| "List file or directory." |
| }; |
| #endif /* STAGE1_5 */ |
| |
| |
| /* makeactive */ |
| static int |
| makeactive_func (char *arg, int flags) |
| { |
| int status = 0; |
| int part = 0; |
| |
| if (grub_memcmp (arg, "--status", 8) == 0) |
| { |
| status = 1; |
| arg = skip_to (0, arg); |
| } |
| |
| /* Get the drive and the partition. */ |
| if (! *arg || *arg == ' ' || *arg == '\t') |
| { |
| current_drive = saved_drive; |
| current_partition = saved_partition; |
| } |
| else |
| { |
| if (! set_device (arg)) |
| return 0; |
| } |
| |
| /* The drive must be a hard disk. */ |
| if (! (current_drive & 0x80)) |
| { |
| errnum = ERR_DEV_VALUES; |
| return 0; |
| } |
| |
| /* The partition must be a primary partition. */ |
| if ((part = (current_partition >> 16)) > 3 |
| || (current_partition & 0xFFFF) != 0xFFFF) |
| { |
| errnum = ERR_DEV_VALUES; |
| return 0; |
| } |
| |
| /* Read the MBR in the scratch space. */ |
| if (! rawread (current_drive, 0, 0, SECTOR_SIZE, (unsigned long long)(unsigned long)mbr, 0xedde0d90)) |
| return 0; |
| |
| /* If the partition is an extended partition, setting the active |
| flag violates the specification by IBM. */ |
| if (IS_PC_SLICE_TYPE_EXTENDED (PC_SLICE_TYPE (mbr, part))) |
| { |
| errnum = ERR_DEV_VALUES; |
| return 0; |
| } |
| |
| if (status) |
| { |
| int active = (PC_SLICE_FLAG (mbr, part) == PC_SLICE_FLAG_BOOTABLE); |
| if (debug > 0) |
| grub_printf ("Partition (hd%d,%d) is %sactive.\n", (current_drive & 0x7F), part, ((active ? "" : "not "))); |
| |
| return active; |
| } |
| |
| /* Check if the active flag is disabled. */ |
| if (PC_SLICE_FLAG (mbr, part) != PC_SLICE_FLAG_BOOTABLE) |
| { |
| /* Clear all the active flags in this table. */ |
| { |
| int j; |
| for (j = 0; j < 4; j++) |
| PC_SLICE_FLAG (mbr, j) = 0; |
| } |
| |
| /* Set the flag. */ |
| PC_SLICE_FLAG (mbr, part) = PC_SLICE_FLAG_BOOTABLE; |
| |
| /* Write back the MBR. */ |
| if (! rawwrite (current_drive, 0, mbr)) |
| return 0; |
| |
| if (debug > 0) |
| grub_printf ("Partition (hd%d,%d) successfully set active.\n", (current_drive & 0x7F), part); |
| } |
| else |
| { |
| if (debug > 0) |
| grub_printf ("Partition (hd%d,%d) was already active.\n", (current_drive & 0x7F), part); |
| } |
| |
| return 1; |
| } |
| |
| static struct builtin builtin_makeactive = |
| { |
| "makeactive", |
| makeactive_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "makeactive [--status] [PART]", |
| "Activate the partition PART. PART defaults to the current root device." |
| " This command is limited to _primary_ PC partitions on a hard disk." |
| }; |
| |
| |
| #ifndef GRUB_UTIL |
| static unsigned long long start_sector, sector_count; |
| unsigned long long initrd_start_sector; |
| |
| /* Get the start sector number of the file. */ |
| static void disk_read_start_sector_func (unsigned long sector, unsigned long offset, unsigned long length); |
| static void |
| disk_read_start_sector_func (unsigned long sector, unsigned long offset, unsigned long length) |
| { |
| if (sector_count < 1) |
| { |
| start_sector = sector; |
| } |
| sector_count++; |
| } |
| |
| static void print_bios_total_drives(void); |
| static void |
| print_bios_total_drives(void) |
| { |
| grub_printf ("\nfloppies_orig=%d, harddrives_orig=%d, floppies_curr=%d, harddrives_curr=%d\n", |
| ((floppies_orig & 1)?(floppies_orig >> 6) + 1 : 0), harddrives_orig, |
| (((*(char*)0x410) & 1)?((*(char*)0x410) >> 6) + 1 : 0), (*(char*)0x475)); |
| } |
| |
| #endif |
| |
| unsigned long probed_total_sectors; |
| unsigned long probed_total_sectors_round; |
| unsigned long probed_heads; |
| unsigned long probed_sectors_per_track; |
| unsigned long probed_cylinders; |
| unsigned long sectors_per_cylinder; |
| |
| int filesystem_type; |
| |
| /* matrix of coefficients of linear equations |
| * |
| * C[n] * (H_count * S_count) + H[n] * S_count = LBA[n] - S[n] + 1 |
| * |
| * where n = 1, 2, 3, 4, 5, 6, 7, 8 |
| */ |
| /* This starts at offset 0x130 */ |
| long long L[9]; /* L[n] == LBA[n] - S[n] + 1 */ |
| long H[9]; |
| short C[9]; |
| short X; |
| short Y; |
| short Cmax; |
| long Hmax; |
| short Smax; |
| unsigned long Z; |
| |
| /* |
| * return: |
| * 0 success |
| * otherwise failure |
| * 1 no "55 AA" at the end |
| * |
| */ |
| |
| int |
| probe_bpb (struct master_and_dos_boot_sector *BS) |
| { |
| unsigned long i; |
| |
| /* first, check ext2 grldr boot sector */ |
| probed_total_sectors = BS->total_sectors_long; |
| |
| /* at 0D: (byte)Sectors per block. Valid values are 2, 4, 8, 16 and 32. */ |
| if (BS->sectors_per_cluster < 2 || 32 % BS->sectors_per_cluster) |
| goto failed_ext2_grldr; |
| |
| /* at 0E: (word)Bytes per block. |
| * Valid values are 0x400, 0x800, 0x1000, 0x2000 and 0x4000. |
| */ |
| if (BS->reserved_sectors != BS->sectors_per_cluster * 0x200) |
| goto failed_ext2_grldr; |
| |
| i = *(unsigned long *)((char *)BS + 0x2C); |
| if (BS->reserved_sectors == 0x400 && i != 2) |
| goto failed_ext2_grldr; |
| |
| if (BS->reserved_sectors != 0x400 && i != 1) |
| goto failed_ext2_grldr; |
| |
| /* at 14: Pointers per block(number of blocks covered by an indirect block). |
| * Valid values are 0x100, 0x200, 0x400, 0x800, 0x1000. |
| */ |
| |
| i = *(unsigned long *)((char *)BS + 0x14); |
| if (i < 0x100 || 0x1000 % i) |
| goto failed_ext2_grldr; |
| |
| /* at 10: Pointers in pointers-per-block blocks, that is, number of |
| * blocks covered by a double-indirect block. |
| * Valid values are 0x10000, 0x40000, 0x100000, 0x400000 and 0x1000000. |
| */ |
| |
| if (*(unsigned long *)((char *)BS + 0x10) != i * i) |
| goto failed_ext2_grldr; |
| |
| if (! BS->sectors_per_track || BS->sectors_per_track > 63) |
| goto failed_ext2_grldr; |
| |
| if (BS->total_heads > 256 /* (BS->total_heads - 1) >> 8 */) |
| goto failed_ext2_grldr; |
| |
| probed_heads = BS->total_heads; |
| probed_sectors_per_track = BS->sectors_per_track; |
| sectors_per_cylinder = probed_heads * probed_sectors_per_track; |
| probed_cylinders = (probed_total_sectors + sectors_per_cylinder - 1) / sectors_per_cylinder; |
| |
| filesystem_type = 5; |
| |
| /* BPB probe success */ |
| return 0; |
| |
| failed_ext2_grldr: |
| probed_total_sectors = BS->total_sectors_short ? BS->total_sectors_short : (BS->total_sectors_long ? BS->total_sectors_long : (unsigned long)BS->total_sectors_long_long); |
| #if 0 |
| if (probed_total_sectors != sector_count && sector_count != 1 && (! (probed_total_sectors & 1) || probed_total_sectors != sector_count - 1)) |
| goto failed_probe_BPB; |
| #endif |
| if (BS->bytes_per_sector != 0x200) |
| return 1; |
| if (! BS->sectors_per_cluster || 128 % BS->sectors_per_cluster) |
| return 1; |
| // if (! BS->reserved_sectors) /* NTFS reserved_sectors is 0 */ |
| // goto failed_probe_BPB; |
| if (BS->number_of_fats > (unsigned char)2 /* BS->number_of_fats && ((BS->number_of_fats - 1) >> 1) */) |
| return 1; |
| if (! BS->sectors_per_track || BS->sectors_per_track > 63) |
| return 1; |
| if (BS->total_heads > 256 /* (BS->total_heads - 1) >> 8 */) |
| return 1; |
| if (BS->media_descriptor < (unsigned char)0xF0) |
| return 1; |
| if (! BS->root_dir_entries && ! BS->total_sectors_short && ! BS->sectors_per_fat) /* FAT32 or NTFS */ |
| if (BS->number_of_fats && BS->total_sectors_long && BS->sectors_per_fat32) |
| { |
| filesystem_type = 3; |
| } |
| else if (! BS->number_of_fats && ! BS->total_sectors_long && ! BS->reserved_sectors && BS->total_sectors_long_long) |
| { |
| filesystem_type = 4; |
| } else |
| return 1; /* unknown NTFS-style BPB */ |
| else if (BS->number_of_fats && BS->sectors_per_fat) /* FAT12 or FAT16 */ |
| if ((probed_total_sectors - BS->reserved_sectors - BS->number_of_fats * BS->sectors_per_fat - (BS->root_dir_entries * 32 + BS->bytes_per_sector - 1) / BS->bytes_per_sector) / BS->sectors_per_cluster < 0x0ff8 ) |
| { |
| filesystem_type = 1; |
| } else { |
| filesystem_type = 2; |
| } |
| else |
| return 1; /* unknown BPB */ |
| |
| probed_heads = BS->total_heads; |
| probed_sectors_per_track = BS->sectors_per_track; |
| sectors_per_cylinder = probed_heads * probed_sectors_per_track; |
| probed_cylinders = (probed_total_sectors + sectors_per_cylinder - 1) / sectors_per_cylinder; |
| |
| /* BPB probe success */ |
| return 0; |
| |
| } |
| |
| /* on call: |
| * BS points to the bootsector |
| * start_sector1 is the start_sector of the bootimage in the real disk, if unsure, set it to 0 |
| * sector_count1 is the sector_count of the bootimage in the real disk, if unsure, set it to 1 |
| * part_start1 is the part_start of the partition in which the bootimage resides, if unsure, set it to 0 |
| * |
| * on return: |
| * 0 success |
| * otherwise failure |
| * |
| */ |
| |
| int |
| probe_mbr (struct master_and_dos_boot_sector *BS, unsigned long start_sector1, unsigned long sector_count1, unsigned long part_start1) |
| { |
| unsigned long i, j; |
| unsigned long lba_total_sectors = 0; |
| |
| /* probe the partition table */ |
| |
| Cmax = 0; Hmax = 0; Smax = 0; |
| for (i = 0; i < 4; i++) |
| { |
| int *part_entry; |
| /* the boot indicator must be 0x80 (for bootable) or 0 (for non-bootable) */ |
| if ((unsigned char)(BS->P[i].boot_indicator << 1))/* if neither 0x80 nor 0 */ |
| return 1; |
| /* check if the entry is empty, i.e., all the 16 bytes are 0 */ |
| part_entry = (int *)&(BS->P[i].boot_indicator); |
| if (*part_entry++ || *part_entry++ || *part_entry++ || *part_entry) |
| //if (*(long long *)&BS->P[i] || ((long long *)&BS->P[i])[1]) |
| { |
| /* valid partitions never start at 0, because this is where the MBR |
| * lives; and more, the number of total sectors should be non-zero. |
| */ |
| if (! BS->P[i].start_lba || ! BS->P[i].total_sectors) |
| return 2; |
| if (lba_total_sectors < BS->P[i].start_lba+BS->P[i].total_sectors) |
| lba_total_sectors = BS->P[i].start_lba+BS->P[i].total_sectors; |
| /* the partitions should not overlap each other */ |
| for (j = 0; j < i; j++) |
| { |
| if ((BS->P[j].start_lba <= BS->P[i].start_lba) && (BS->P[j].start_lba + BS->P[j].total_sectors >= BS->P[i].start_lba + BS->P[i].total_sectors)) |
| continue; |
| if ((BS->P[j].start_lba >= BS->P[i].start_lba) && (BS->P[j].start_lba + BS->P[j].total_sectors <= BS->P[i].start_lba + BS->P[i].total_sectors)) |
| continue; |
| if ((BS->P[j].start_lba < BS->P[i].start_lba) ? |
| (BS->P[i].start_lba - BS->P[j].start_lba < BS->P[j].total_sectors) : |
| (BS->P[j].start_lba - BS->P[i].start_lba < BS->P[i].total_sectors)) |
| return 3; |
| } |
| /* the cylinder number */ |
| C[i] = (BS->P[i].start_sector_cylinder >> 8) | ((BS->P[i].start_sector_cylinder & 0xc0) << 2); |
| if (Cmax < C[i]) |
| Cmax = C[i]; |
| H[i] = BS->P[i].start_head; |
| if (Hmax < H[i]) |
| Hmax = H[i]; |
| X = BS->P[i].start_sector_cylinder & 0x3f;/* the sector number */ |
| if (Smax < X) |
| Smax = X; |
| /* the sector number should not be 0. */ |
| ///* partitions should not start at the first track, the MBR-track */ |
| if (! X /* || BS->P[i].start_lba < Smax */) |
| return 4; |
| L[i] = BS->P[i].start_lba - X + 1; |
| if (start_sector1 == part_start1)/* extended partition is pretending to be a whole drive */ |
| L[i] +=(unsigned long) part_start1; |
| |
| C[i+4] = (BS->P[i].end_sector_cylinder >> 8) | ((BS->P[i].end_sector_cylinder & 0xc0) << 2); |
| if (Cmax < C[i+4]) |
| Cmax = C[i+4]; |
| H[i+4] = BS->P[i].end_head; |
| if (Hmax < H[i+4]) |
| Hmax = H[i+4]; |
| Y = BS->P[i].end_sector_cylinder & 0x3f; |
| if (Smax < Y) |
| Smax = Y; |
| if (! Y) |
| return 5; |
| L[i+4] = BS->P[i].start_lba + BS->P[i].total_sectors; |
| if (L[i+4] < Y) |
| return 6; |
| L[i+4] -= Y; |
| if (start_sector1 == part_start1)/* extended partition is pretending to be a whole drive */ |
| L[i+4] +=(unsigned long) part_start1; |
| |
| /* C[n] * (H_count * S_count) + H[n] * S_count = LBA[n] - S[n] + 1 = L[n] */ |
| |
| /* C[n] * (H * S) + H[n] * S = L[n] */ |
| |
| /* Check the large disk partition -- Win98 */ |
| if (Y == 63 && H[i+4] == Hmax && C[i+4] == Cmax |
| && (Hmax >= 254 || Cmax >= 1022) |
| /* && C[i+4] == 1023 */ |
| && (Cmax + 1) * (Hmax + 1) * 63 < L[i+4] + Y |
| /* && C[i] * (Hmax + 1) * 63 + H[i] * 63 + X - 1 == BS->P[i].start_lba */ |
| ) |
| { |
| if (C[i] * (Hmax+1) * 63 + H[i] * 63 > L[i]) |
| return 7; |
| if (C[i] * (Hmax+1) * 63 + H[i] * 63 < L[i]) |
| { |
| /* calculate CHS numbers from start LBA */ |
| if (X != ((unsigned long)L[i] % 63)+1 && X != 63) |
| return 8; |
| if (H[i]!=((unsigned long)L[i]/63)%(Hmax+1) && H[i]!=Hmax) |
| return 9; |
| if (C[i] != (((unsigned long)L[i]/63/(Hmax+1)) & 0x3ff) && C[i] != Cmax) |
| return 10; |
| } |
| C[i] = 0; |
| H[i] = 1; |
| L[i] = 63; |
| C[i+4] = 1; |
| H[i+4] = 0; |
| L[i+4] = (Hmax + 1) * 63; |
| } |
| |
| /* Check the large disk partition -- Win2K */ |
| else if (Y == 63 && H[i+4] == Hmax /* && C[i+4] == Cmax */ |
| && (C[i+4] + 1) * (Hmax + 1) * 63 < L[i+4] + Y |
| && ! (((unsigned long)L[i+4] + Y) % ((Hmax + 1) * 63)) |
| && ((((unsigned long)L[i+4] + Y) / ((Hmax + 1) * 63) - 1) & 0x3ff) == C[i+4] |
| ) |
| { |
| if (C[i] * (Hmax+1) * 63 + H[i] * 63 > L[i]) |
| return 11; |
| if (C[i] * (Hmax+1) * 63 + H[i] * 63 < L[i]) |
| { |
| if (((unsigned long)L[i] - H[i] * 63) % ((Hmax+1) * 63)) |
| return 12; |
| if (((((unsigned long)L[i] - H[i] * 63) / ((Hmax+1) * 63)) & 0x3ff) != C[i]) |
| return 13; |
| } |
| C[i] = 0; |
| H[i] = 1; |
| L[i] = 63; |
| C[i+4] = 1; |
| H[i+4] = 0; |
| L[i+4] = (Hmax + 1) * 63; |
| } |
| |
| /* Maximum of C[n] * (H * S) + H[n] * S = 1023 * 255 * 63 + 254 * 63 = 0xFB03C1 */ |
| |
| else if (L[i+4] > 0xFB03C1) /* Large disk */ |
| { |
| /* set H/S to max */ |
| if (Hmax < 254) |
| Hmax = 254; |
| Smax = 63; |
| if ((unsigned long)L[i+4] % Smax) |
| return 114; |
| if (H[i+4]!=((unsigned long)L[i+4]/63)%(Hmax+1) && H[i+4]!=Hmax) |
| return 115; |
| if (C[i+4] != (((unsigned long)L[i+4]/63/(Hmax+1)) & 0x3ff) && C[i+4] != Cmax) |
| return 116; |
| |
| if (C[i] * (Hmax+1) * 63 + H[i] * 63 > L[i]) |
| return 117; |
| if (C[i] * (Hmax+1) * 63 + H[i] * 63 < L[i]) |
| { |
| /* calculate CHS numbers from start LBA */ |
| if (X != ((unsigned long)L[i] % 63)+1 && X != 63) |
| return 118; |
| if (H[i]!=((unsigned long)L[i]/63)%(Hmax+1) && H[i]!=Hmax) |
| return 119; |
| if (C[i] != (((unsigned long)L[i]/63/(Hmax+1)) & 0x3ff) && C[i] != Cmax) |
| return 120; |
| } |
| C[i] = 0; |
| H[i] = 1; |
| L[i] = 63; |
| C[i+4] = 1; |
| H[i+4] = 0; |
| L[i+4] = (Hmax + 1) * 63; |
| } |
| } |
| else |
| { |
| /* empty entry, zero all the coefficients */ |
| C[i] = 0; |
| H[i] = 0; |
| L[i] = 0; |
| C[i+4] = 0; |
| H[i+4] = 0; |
| L[i+4] = 0; |
| } |
| } |
| |
| // for (i = 0; i < 4; i++) |
| // { |
| //grub_printf ("%d \t%d \t%d\n%d \t%d \t%d\n", C[i], H[i],(int)(L[i]), C[i+4], H[i+4],(int)(L[i+4])); |
| // } |
| for (i = 0; i < 8; i++) |
| { |
| if (C[i]) |
| break; |
| } |
| if (i == 8) /* all C[i] == 0 */ |
| { |
| for (i = 0; i < 8; i++) |
| { |
| if (H[i]) |
| break; |
| } |
| if (i == 8) /* all H[i] == 0 */ |
| return 14; |
| for (j = 0; j < i; j++) |
| if (L[j]) |
| return 15; |
| if (! L[i]) |
| return 16; |
| //if (*(long *)((char *)&(L[i]) + 4)) |
| if (L[i] > 0x7fffffff) |
| return 17; |
| if ((long)L[i] % H[i]) |
| return 18; |
| probed_sectors_per_track = (long)L[i] / H[i]; |
| if (probed_sectors_per_track > 63 || probed_sectors_per_track < Smax) |
| return 19; |
| Smax = probed_sectors_per_track; |
| for (j = i + 1; j < 8; j++) |
| { |
| if (H[j]) |
| { |
| if (probed_sectors_per_track * H[j] != L[j]) |
| return 20; |
| } |
| else if (L[j]) |
| return 21; |
| } |
| probed_heads = Hmax + 1; |
| #if 0 |
| if (sector_count1 == 1) |
| probed_cylinders = 1; |
| else |
| #endif |
| { |
| L[8] = sector_count1; /* just set to a number big enough */ |
| Z = sector_count1 / probed_sectors_per_track; |
| for (j = probed_heads; j <= 256; j++) |
| { |
| H[8] = Z % j;/* the remainder */ |
| if (L[8] > H[8]) |
| { |
| L[8] = H[8];/* the least residue */ |
| probed_heads = j;/* we got the optimum value */ |
| } |
| } |
| probed_cylinders = Z / probed_heads; |
| if (! probed_cylinders) |
| probed_cylinders = 1; |
| } |
| sectors_per_cylinder = probed_heads * probed_sectors_per_track; |
| probed_total_sectors_round = sectors_per_cylinder * probed_cylinders; |
| probed_total_sectors = lba_total_sectors; |
| } |
| else |
| { |
| if (i > 0) |
| { |
| C[8] = C[i]; H[8] = H[i]; L[8] = L[i]; |
| C[i] = C[0]; H[i] = H[0]; L[i] = L[0]; |
| C[0] = C[8]; H[0] = H[8]; L[0] = L[8]; |
| } |
| H[8] = 0; /* will store sectors per track */ |
| for (i = 1; i < 8; i++) |
| { |
| H[i] = C[0] * H[i] - C[i] * H[0]; |
| L[i] = C[0] * L[i] - C[i] * L[0]; |
| if (H[i]) |
| { |
| if (H[i] < 0) |
| { |
| H[i] = - H[i];/* H[i] < 0x080000 */ |
| L[i] = - L[i]; |
| } |
| /* Note: the max value of H[i] is 1024 * 256 * 2 = 0x00080000, |
| * so L[i] should be less than 0x00080000 * 64 = 0x02000000 */ |
| if (L[i] <= 0 || L[i] > 0x7fffffff) |
| return 22; |
| L[8] = ((long)L[i]) / H[i]; /* sectors per track */ |
| if (L[8] * H[i] != L[i]) |
| return 23; |
| if (L[8] > 63 || L[8] < Smax) |
| return 24; |
| Smax = L[8]; |
| if (H[8]) |
| { |
| /* H[8] is the old L[8] */ |
| if (L[8] != H[8]) |
| return 25; |
| } |
| else /* H[8] is empty, so store L[8] for the first time */ |
| H[8] = L[8]; |
| } |
| else if (L[i]) |
| return 26; |
| } |
| if (H[8]) |
| { |
| /* H[8] is sectors per track */ |
| L[0] -= H[0] * H[8]; |
| /* Note: the max value of H[8] is 63, the max value of C[0] is 1023, |
| * so L[0] should be less than 64 * 1024 * 256 = 0x01000000 */ |
| if (L[0] <= 0 || L[0] > 0x7fffffff) |
| return 27; |
| |
| /* L[8] is number of heads */ |
| L[8] = ((long)L[0]) / H[8] / C[0]; |
| if (L[8] * H[8] * C[0] != L[0]) |
| return 28; |
| if (L[8] > 256 || L[8] <= Hmax) |
| return 29; |
| probed_sectors_per_track = H[8]; |
| } |
| else /* fail to set L[8], this means all H[i]==0, i=1,2,3,4,5,6,7 */ |
| { |
| /* Now the only equation is: C[0] * H * S + H[0] * S = L[0] */ |
| for (i = 63; i >= Smax; i--) |
| { |
| L[8] = L[0] - H[0] * i; |
| if (L[8] <= 0 || L[8] > 0x7fffffff) |
| continue; |
| Z = L[8]; |
| if (Z % (C[0] * i)) |
| continue; |
| L[8] = Z / (C[0] * i); |
| if (L[8] <= 256 && L[8] > Hmax) |
| break;/* we have got the PROBED_HEADS */ |
| } |
| if (i < Smax) |
| return 30; |
| probed_sectors_per_track = i; |
| } |
| probed_heads = L[8]; |
| sectors_per_cylinder = probed_heads * probed_sectors_per_track; |
| probed_cylinders = (sector_count1 + sectors_per_cylinder - 1) / sectors_per_cylinder; |
| if (probed_cylinders < Cmax + 1) |
| probed_cylinders = Cmax + 1; |
| probed_total_sectors_round = sectors_per_cylinder * probed_cylinders; |
| probed_total_sectors = lba_total_sectors; |
| } |
| |
| |
| filesystem_type = 0; /* MBR device */ |
| |
| /* partition table probe success */ |
| return 0; |
| } |
| |
| //#include "fat.h" |
| |
| #ifndef GRUB_UTIL |
| |
| unsigned long long map_mem_min = 0x100000; |
| unsigned long long map_mem_max = (-4096ULL); |
| |
| /* map */ |
| /* Map FROM_DRIVE to TO_DRIVE. */ |
| int |
| map_func (char *arg, int flags) |
| { |
| char *to_drive; |
| char *from_drive; |
| unsigned long to, from, i = 0; |
| int j; |
| char *filename; |
| char *p; |
| unsigned long extended_part_start; |
| unsigned long extended_part_length; |
| |
| int err; |
| |
| //struct master_and_dos_boot_sector *BS = (struct master_and_dos_boot_sector *) RAW_ADDR (0x8000); |
| #define BS ((struct master_and_dos_boot_sector *)mbr) |
| |
| unsigned long long mem = -1ULL; |
| int read_Only = 0; |
| int fake_write = 0; |
| int unsafe_boot = 0; |
| int disable_lba_mode = 0; |
| int disable_chs_mode = 0; |
| unsigned long long sectors_per_track = -1ULL; |
| unsigned long long heads_per_cylinder = -1ULL; |
| unsigned long long to_filesize = 0; |
| unsigned long BPB_H = 0; |
| unsigned long BPB_S = 0; |
| int in_situ = 0; |
| int add_mbt = -1; |
| int prefer_top = 0; |
| filesystem_type = -1; |
| start_sector = sector_count = 0; |
| |
| for (;;) |
| { |
| if (grub_memcmp (arg, "--status", 8) == 0) |
| { |
| #ifndef GRUB_UTIL |
| // if (debug > 0) |
| { |
| print_bios_total_drives(); |
| printf ("\nNumber of ATAPI CD-ROMs: %d\n", atapi_dev_count); |
| } |
| #endif |
| |
| if (rd_base != -1ULL) |
| grub_printf ("\nram_drive=0x%X, rd_base=0x%lX, rd_size=0x%lX\n", ram_drive, rd_base, rd_size); |
| if (unset_int13_handler (1) && drive_map_slot_empty (bios_drive_map[0])) |
| { |
| grub_printf ("\nThe int13 hook is off. The drive map table is currently empty.\n"); |
| return 1; |
| } |
| |
| //struct drive_map_slot |
| //{ |
| /* Remember to update DRIVE_MAP_SLOT_SIZE once this is modified. |
| * The struct size must be a multiple of 4. |
| */ |
| |
| /* X=max_sector bit 7: read only or fake write */ |
| /* Y=to_sector bit 6: safe boot or fake write */ |
| /* ------------------------------------------- */ |
| /* X Y: meaning of restrictions imposed on map */ |
| /* ------------------------------------------- */ |
| /* 1 1: read only=0, fake write=1, safe boot=0 */ |
| /* 1 0: read only=1, fake write=0, safe boot=0 */ |
| /* 0 1: read only=0, fake write=0, safe boot=1 */ |
| /* 0 0: read only=0, fake write=0, safe boot=0 */ |
| |
| // unsigned char from_drive; |
| // unsigned char to_drive; /* 0xFF indicates a memdrive */ |
| // unsigned char max_head; |
| // unsigned char max_sector; /* bit 7: read only */ |
| /* bit 6: disable lba */ |
| |
| // unsigned short to_cylinder; /* max cylinder of the TO drive */ |
| /* bit 15: TO drive support LBA */ |
| /* bit 14: TO drive is CDROM(with big 2048-byte sector) */ |
| /* bit 13: FROM drive is CDROM(with big 2048-byte sector) */ |
| |
| // unsigned char to_head; /* max head of the TO drive */ |
| // unsigned char to_sector; /* max sector of the TO drive */ |
| /* bit 7: in-situ */ |
| /* bit 6: fake-write or safe-boot */ |
| |
| // unsigned long start_sector; |
| // unsigned long start_sector_hi; /* hi dword of the 64-bit value */ |
| // unsigned long sector_count; |
| // unsigned long sector_count_hi; /* hi dword of the 64-bit value */ |
| //}; |
| |
| /* From To MaxHead MaxSector ToMaxCylinder ToMaxHead ToMaxSector StartLBA_lo StartLBA_hi Sector_count_lo Sector_count_hi Hook Type */ |
| // if (debug > 0) |
| grub_printf ("\nFr To Hm Sm To_C _H _S Start_Sector Sector_Count DHR" |
| "\n-- -- -- -- ---- -- -- ---------------- ---------------- ---\n"); |
| if (! unset_int13_handler (1)) |
| for (i = 0; i < DRIVE_MAP_SIZE; i++) |
| { |
| if (drive_map_slot_empty (hooked_drive_map[i])) |
| break; |
| for (j = 0; j < DRIVE_MAP_SIZE; j++) |
| { |
| if (drive_map_slot_equal(bios_drive_map[j], hooked_drive_map[i])) |
| break; |
| } |
| // if (debug > 0) |
| grub_printf ("%02X %02X %02X %02X %04X %02X %02X %016lX %016lX %c%c%c\n", hooked_drive_map[i].from_drive, hooked_drive_map[i].to_drive, hooked_drive_map[i].max_head, hooked_drive_map[i].max_sector, hooked_drive_map[i].to_cylinder, hooked_drive_map[i].to_head, hooked_drive_map[i].to_sector, (unsigned long long)hooked_drive_map[i].start_sector, (unsigned long long)hooked_drive_map[i].sector_count, ((hooked_drive_map[i].to_cylinder & 0x4000) ? 'C' : hooked_drive_map[i].to_drive < 0x80 ? 'F' : hooked_drive_map[i].to_drive == 0xFF ? 'M' : 'H'), ((j < DRIVE_MAP_SIZE) ? '=' : '>'), ((hooked_drive_map[i].max_sector & 0x80) ? ((hooked_drive_map[i].to_sector & 0x40) ? 'F' : 'R') :((hooked_drive_map[i].to_sector & 0x40) ? 'S' : 'U'))); |
| } |
| for (i = 0; i < DRIVE_MAP_SIZE; i++) |
| { |
| if (drive_map_slot_empty (bios_drive_map[i])) |
| break; |
| if (! unset_int13_handler (1)) |
| { |
| for (j = 0; j < DRIVE_MAP_SIZE; j++) |
| { |
| if (drive_map_slot_equal(hooked_drive_map[j], bios_drive_map[i])) |
| break; |
| } |
| if (j < DRIVE_MAP_SIZE) |
| continue; |
| } |
| // if (debug > 0) |
| grub_printf ("%02X %02X %02X %02X %04X %02X %02X %016lX %016lX %c<%c\n", bios_drive_map[i].from_drive, bios_drive_map[i].to_drive, bios_drive_map[i].max_head, bios_drive_map[i].max_sector, bios_drive_map[i].to_cylinder, bios_drive_map[i].to_head, bios_drive_map[i].to_sector, (unsigned long long)bios_drive_map[i].start_sector, (unsigned long long)bios_drive_map[i].sector_count, ((bios_drive_map[i].to_cylinder & 0x4000) ? 'C' : bios_drive_map[i].to_drive < 0x80 ? 'F' : bios_drive_map[i].to_drive == 0xFF ? 'M' : 'H'), ((bios_drive_map[i].max_sector & 0x80) ? ((bios_drive_map[i].to_sector & 0x40) ? 'F' : 'R') :((bios_drive_map[i].to_sector & 0x40) ? 'S' : 'U'))); |
| } |
| return 1; |
| } |
| else if (grub_memcmp (arg, "--hook", 6) == 0) |
| { |
| unsigned long long first_entry = -1ULL; |
| |
| p = arg + 6; |
| if (*p == '=') |
| { |
| p++; |
| if (! safe_parse_maxint (&p, &first_entry)) |
| return 0; |
| if (first_entry > 0xFF) |
| return ! (errnum = ERR_BAD_ARGUMENT); |
| } |
| unset_int13_handler (0); |
| //if (! unset_int13_handler (1)) |
| // return ! (errnum = ERR_INT13_ON_HOOK); |
| if (drive_map_slot_empty (bios_drive_map[0])) |
| if (atapi_dev_count == 0) |
| return ! (errnum = ERR_NO_DRIVE_MAPPED); |
| if (first_entry <= 0xFF) |
| { |
| /* setup first entry */ |
| /* find first_entry in bios_drive_map */ |
| for (i = 0; i < DRIVE_MAP_SIZE - 1; i++) |
| { |
| if (drive_map_slot_empty (bios_drive_map[i])) |
| break; /* not found */ |
| if (bios_drive_map[i].from_drive == first_entry) |
| { |
| /* found */ |
| /* nothing to do if it is already the first entry */ |
| if (i == 0) |
| break; |
| /* backup this entry onto hooked_drive_map[0] */ |
| grub_memmove ((char *) &hooked_drive_map[0], (char *) &bios_drive_map[i], sizeof (struct drive_map_slot)); |
| /* move top entries downward */ |
| grub_memmove ((char *) &bios_drive_map[1], (char *) &bios_drive_map[0], sizeof (struct drive_map_slot) * i); |
| /* restore this entry onto bios_drive_map[0] from hooked_drive_map[0] */ |
| grub_memmove ((char *) &bios_drive_map[0], (char *) &hooked_drive_map[0], sizeof (struct drive_map_slot)); |
| break; |
| } |
| } |
| } |
| set_int13_handler (bios_drive_map); |
| buf_drive = -1; |
| buf_track = -1; |
| return 1; |
| } |
| else if (grub_memcmp (arg, "--unhook", 8) == 0) |
| { |
| //if (unset_int13_handler (1)) |
| // return ! (errnum = ERR_INT13_OFF_HOOK); |
| unset_int13_handler (0); |
| // int13_on_hook = 0; |
| buf_drive = -1; |
| buf_track = -1; |
| return 1; |
| } |
| else if (grub_memcmp (arg, "--unmap=", 8) == 0) |
| { |
| int drive; |
| char map_tmp[32]; |
| |
| p = arg + 8; |
| for (drive = 0xFF; drive >= 0; drive--) |
| { |
| if (drive != INITRD_DRIVE && in_range (p, drive) |
| #ifdef FSYS_FB |
| && drive != FB_DRIVE |
| #endif |
| ) |
| { |
| /* unmap drive */ |
| sprintf (map_tmp, "(0x%X) (0x%X)", drive, drive); |
| map_func (map_tmp, flags); |
| } |
| } |
| buf_drive = -1; |
| buf_track = -1; |
| return 1; |
| } |
| else if (grub_memcmp (arg, "--rehook", 8) == 0) |
| { |
| //if (unset_int13_handler (1)) |
| // return ! (errnum = ERR_INT13_OFF_HOOK); |
| unset_int13_handler (0); |
| // int13_on_hook = 0; |
| if (drive_map_slot_empty (bios_drive_map[0])) |
| if (atapi_dev_count == 0) |
| return 1;//! (errnum = ERR_NO_DRIVE_MAPPED); |
| // set_int13_handler (bios_drive_map); /* backup bios_drive_map onto hooked_drive_map */ |
| // unset_int13_handler (0); /* unhook it to avoid further access of hooked_drive_map by the call to map_func */ |
| // /* delete all memory mappings in hooked_drive_map */ |
| // for (i = 0; i < DRIVE_MAP_SIZE - 1; i++) |
| // { |
| // while (hooked_drive_map[i].to_drive == 0xFF && !(hooked_drive_map[i].to_cylinder & 0x4000)) |
| // { |
| // grub_memmove ((char *) &hooked_drive_map[i], (char *) &hooked_drive_map[i + 1], sizeof (struct drive_map_slot) * (DRIVE_MAP_SIZE - i)); |
| // } |
| // } |
| /* clear hooked_drive_map */ |
| grub_memset ((char *) hooked_drive_map, 0, sizeof (struct drive_map_slot) * (DRIVE_MAP_SIZE)); |
| |
| /* re-create (topdown) all memory map entries in hooked_drive_map from bios_drive_map */ |
| for (j = 0; j < DRIVE_MAP_SIZE - 1; j++) |
| { |
| unsigned long long top_start = 0; |
| unsigned long top_entry = DRIVE_MAP_SIZE; |
| /* find the top memory mapping in bios_drive_map */ |
| for (i = 0; i < DRIVE_MAP_SIZE - 1; i++) |
| { |
| if (bios_drive_map[i].to_drive == 0xFF && !(bios_drive_map[i].to_cylinder & 0x4000)) |
| { |
| if (top_start < bios_drive_map[i].start_sector) |
| { |
| top_start = bios_drive_map[i].start_sector; |
| top_entry = i; |
| } |
| } |
| } |
| if (top_entry >= DRIVE_MAP_SIZE) /* not found */ |
| break; /* end */ |
| /* move it to hooked_drive_map, by a copy and a delete */ |
| grub_memmove ((char *) &hooked_drive_map[j], (char *) &bios_drive_map[top_entry], sizeof (struct drive_map_slot)); |
| grub_memmove ((char *) &bios_drive_map[top_entry], (char *) &bios_drive_map[top_entry + 1], sizeof (struct drive_map_slot) * (DRIVE_MAP_SIZE - top_entry)); |
| } |
| /* now there should be no memory mappings in bios_drive_map. */ |
| |
| // /* delete all memory mappings in bios_drive_map */ |
| // for (i = 0; i < DRIVE_MAP_SIZE - 1; i++) |
| // { |
| // while (bios_drive_map[i].to_drive == 0xFF && !(bios_drive_map[i].to_cylinder & 0x4000)) |
| // { |
| // grub_memmove ((char *) &bios_drive_map[i], (char *) &bios_drive_map[i + 1], sizeof (struct drive_map_slot) * (DRIVE_MAP_SIZE - i)); |
| // } |
| // } |
| /* re-create all memory mappings stored in hooked_drive_map */ |
| for (i = 0; i < DRIVE_MAP_SIZE - 1; i++) |
| { |
| if (hooked_drive_map[i].to_drive == 0xFF && !(hooked_drive_map[i].to_cylinder & 0x4000)) |
| { |
| char tmp[128]; |
| #ifndef NO_DECOMPRESSION |
| int no_decompression_bak = no_decompression; |
| int is64bit_bak = is64bit; |
| #endif |
| sprintf (tmp, "--heads=%d --sectors-per-track=%d (md)0x%lX+0x%lX (0x%X)", (hooked_drive_map[i].max_head + 1), ((hooked_drive_map[i].max_sector) & 63), (unsigned long long)hooked_drive_map[i].start_sector, (unsigned long long)hooked_drive_map[i].sector_count, hooked_drive_map[i].from_drive); |
| |
| if (debug > 1) |
| { |
| printf ("Re-map the memdrive (0x%X):\n\tmap %s\n", hooked_drive_map[i].from_drive, tmp); |
| } |
| errnum = 0; |
| disable_map_info = 1; |
| #ifndef NO_DECOMPRESSION |
| if (hooked_drive_map[i].from_drive == INITRD_DRIVE) |
| { |
| no_decompression = 1; |
| is64bit = 0; |
| } |
| #endif |
| map_func (tmp, flags); |
| #ifndef NO_DECOMPRESSION |
| if (hooked_drive_map[i].from_drive == INITRD_DRIVE) |
| { |
| no_decompression = no_decompression_bak; |
| is64bit = is64bit_bak; |
| } |
| #endif |
| disable_map_info = 0; |
| |
| if (errnum) |
| { |
| if (debug > 0) |
| { |
| printf ("Fatal: Error %d occurred while 'map %s'. Please report this bug.\n", errnum, tmp); |
| } |
| return 0; |
| } |
| |
| if (hooked_drive_map[i].from_drive == INITRD_DRIVE) |
| linux_header->ramdisk_image = RAW_ADDR (initrd_start_sector << 9); |
| /* change the map options */ |
| for (j = 0; j < DRIVE_MAP_SIZE - 1; j++) |
| { |
| if (bios_drive_map[j].from_drive == hooked_drive_map[i].from_drive && bios_drive_map[j].to_drive == 0xFF && !(bios_drive_map[j].to_cylinder & 0x4000)) |
| { |
| bios_drive_map[j].max_head = hooked_drive_map[i].max_head; |
| bios_drive_map[j].max_sector = hooked_drive_map[i].max_sector; |
| bios_drive_map[j].to_cylinder = hooked_drive_map[i].to_cylinder; |
| bios_drive_map[j].to_head = hooked_drive_map[i].to_head; |
| bios_drive_map[j].to_sector = hooked_drive_map[i].to_sector; |
| break; |
| } |
| } |
| } |
| } |
| set_int13_handler (bios_drive_map); /* hook it */ |
| buf_drive = -1; |
| buf_track = -1; |
| return 1; |
| } |
| else if (grub_memcmp (arg, "--floppies=", 11) == 0) |
| { |
| unsigned long long floppies; |
| p = arg + 11; |
| if (! safe_parse_maxint (&p, &floppies)) |
| return 0; |
| if (floppies > 2) |
| return ! (errnum = ERR_INVALID_FLOPPIES); |
| #ifndef GRUB_UTIL |
| *((char *)0x410) &= 0x3e; |
| if (floppies) |
| *((char *)0x410) |= (floppies == 1) ? 1 : 0x41; |
| #endif |
| return 1; |
| } |
| else if (grub_memcmp (arg, "--harddrives=", 13) == 0) |
| { |
| unsigned long long harddrives; |
| p = arg + 13; |
| if (! safe_parse_maxint (&p, &harddrives)) |
| return 0; |
| if (harddrives > 127) |
| return ! (errnum = ERR_INVALID_HARDDRIVES); |
| #ifndef GRUB_UTIL |
| *((char *)0x475) = harddrives; |
| #endif |
| return 1; |
| } |
| else if (grub_memcmp (arg, "--ram-drive=", 12) == 0) |
| { |
| unsigned long long tmp; |
| p = arg + 12; |
| if (! safe_parse_maxint (&p, &tmp)) |
| return 0; |
| if (tmp > 254) |
| return ! (errnum = ERR_INVALID_RAM_DRIVE); |
| ram_drive = tmp; |
| |
| return 1; |
| } |
| else if (grub_memcmp (arg, "--rd-base=", 10) == 0) |
| { |
| unsigned long long tmp; |
| p = arg + 10; |
| if (! safe_parse_maxint_with_suffix (&p, &tmp, 9)) |
| return 0; |
| // if (tmp == 0xffffffff) |
| // return ! (errnum = ERR_INVALID_RD_BASE); |
| rd_base = tmp; |
| |
| return 1; |
| } |
| else if (grub_memcmp (arg, "--rd-size=", 10) == 0) |
| { |
| unsigned long long tmp; |
| p = arg + 10; |
| if (! safe_parse_maxint_with_suffix (&p, &tmp, 9)) |
| return 0; |
| // if (tmp == 0) |
| // return ! (errnum = ERR_INVALID_RD_SIZE); |
| rd_size = tmp; |
| |
| return 1; |
| } |
| else if (grub_memcmp (arg, "--memdisk-raw=", 14) == 0) |
| { |
| unsigned long long tmp; |
| p = arg + 14; |
| if (! safe_parse_maxint (&p, &tmp)) |
| return 0; |
| memdisk_raw = tmp; |
| return 1; |
| } |
| else if (grub_memcmp (arg, "--a20-keep-on=", 14) == 0) |
| { |
| unsigned long long tmp; |
| p = arg + 14; |
| if (! safe_parse_maxint (&p, &tmp)) |
| return 0; |
| a20_keep_on = tmp; |
| return 1; |
| } |
| else if (grub_memcmp (arg, "--safe-mbr-hook=", 16) == 0) |
| { |
| unsigned long long tmp; |
| p = arg + 16; |
| if (! safe_parse_maxint (&p, &tmp)) |
| return 0; |
| safe_mbr_hook = tmp; |
| return 1; |
| } |
| else if (grub_memcmp (arg, "--int13-scheme=", 15) == 0) |
| { |
| unsigned long long tmp; |
| p = arg + 15; |
| if (! safe_parse_maxint (&p, &tmp)) |
| return 0; |
| int13_scheme = tmp; |
| return 1; |
| } |
| else if (grub_memcmp (arg, "--mem-max=", 10) == 0) |
| { |
| unsigned long long num; |
| p = arg + 10; |
| if (! safe_parse_maxint_with_suffix (&p, &num, 9)) |
| return 0; |
| map_mem_max = (num<<9) & (-4096ULL); // convert to bytes, 4KB alignment, round down |
| if (is64bit) { |
| if (map_mem_max==0) |
| map_mem_max = (-4096ULL); |
| } else { |
| if (map_mem_max==0 || map_mem_max>(1ULL<<32)) |
| map_mem_max = (1ULL<<32); // 4GB |
| } |
| grub_printf("map_mem_max = 0x%lX sectors = 0x%lX bytes\n",map_mem_max>>9,map_mem_max); |
| return 1; |
| } |
| else if (grub_memcmp (arg, "--mem-min=", 10) == 0) |
| { |
| unsigned long long num; |
| p = arg + 10; |
| if (! safe_parse_maxint_with_suffix (&p, &num, 9)) |
| return 0; |
| map_mem_min = (((num<<9)+4095)&(-4096ULL)); // convert to bytes, 4KB alignment, round up |
| if (map_mem_min < (1ULL<<20)) |
| map_mem_min = (1ULL<<20); // 1MB |
| grub_printf("map_mem_min = 0x%lX sectors = 0x%lX bytes\n",map_mem_min>>9,map_mem_min); |
| return 1; |
| } |
| else if (grub_memcmp (arg, "--mem=", 6) == 0) |
| { |
| p = arg + 6; |
| if (! safe_parse_maxint_with_suffix (&p, &mem, 9)) |
| return 0; |
| if (mem == -1ULL) |
| mem = -2ULL;//return errnum = ERR_INVALID_MEM_RESERV; |
| } |
| else if (grub_memcmp (arg, "--mem", 5) == 0) |
| { |
| mem = 0; |
| } |
| else if (grub_memcmp (arg, "--top", 5) == 0) |
| { |
| prefer_top = 1; |
| } |
| else if (grub_memcmp (arg, "--read-only", 11) == 0) |
| { |
| if (read_Only || fake_write || unsafe_boot) |
| return !(errnum = ERR_SPECIFY_RESTRICTION); |
| read_Only = 1; |
| unsafe_boot = 1; |
| } |
| else if (grub_memcmp (arg, "--fake-write", 12) == 0) |
| { |
| if (read_Only || fake_write || unsafe_boot) |
| return !(errnum = ERR_SPECIFY_RESTRICTION); |
| fake_write = 1; |
| unsafe_boot = 1; |
| } |
| else if (grub_memcmp (arg, "--unsafe-boot", 13) == 0) |
| { |
| if (unsafe_boot) |
| return !(errnum = ERR_SPECIFY_RESTRICTION); |
| unsafe_boot = 1; |
| } |
| else if (grub_memcmp (arg, "--disable-chs-mode", 18) == 0) |
| { |
| disable_chs_mode = 1; |
| } |
| else if (grub_memcmp (arg, "--disable-lba-mode", 18) == 0) |
| { |
| disable_lba_mode = 1; |
| } |
| else if (grub_memcmp (arg, "--in-place", 10) == 0) |
| { |
| in_situ = 2; |
| } |
| else if (grub_memcmp (arg, "--in-situ", 9) == 0) |
| { |
| in_situ = 1; |
| } |
| else if (grub_memcmp (arg, "--heads=", 8) == 0) |
| { |
| p = arg + 8; |
| if (! safe_parse_maxint (&p, &heads_per_cylinder)) |
| return 0; |
| if ((unsigned long long)heads_per_cylinder > 256) |
| return ! (errnum = ERR_INVALID_HEADS); |
| } |
| else if (grub_memcmp (arg, "--sectors-per-track=", 20) == 0) |
| { |
| p = arg + 20; |
| if (! safe_parse_maxint (&p, §ors_per_track)) |
| return 0; |
| if ((unsigned long long)sectors_per_track > 63) |
| return ! (errnum = ERR_INVALID_SECTORS); |
| } |
| else if (grub_memcmp (arg, "--add-mbt=", 10) == 0) |
| { |
| unsigned long long num; |
| p = arg + 10; |
| if (! safe_parse_maxint (&p, &num)) |
| return 0; |
| add_mbt = num; |
| if (add_mbt < -1 || add_mbt > 1) |
| return 0; |
| } |
| else |
| break; |
| arg = skip_to (0, arg); |
| } |
| |
| to_drive = arg; |
| from_drive = skip_to (0, arg); |
| |
| // if (grub_memcmp (from_drive, "(hd+)", 5) == 0) |
| // { |
| // from = (unsigned char)(0x80 + (*(unsigned char *)0x475)); |
| // } |
| // else |
| // { |
| /* Get the drive number for FROM_DRIVE. */ |
| set_device (from_drive); |
| if (errnum) |
| return 0; |
| from = current_drive; |
| // } |
| |
| if (! (from & 0x80) && in_situ) |
| return ! (errnum = ERR_IN_SITU_FLOPPY); |
| /* Get the drive number for TO_DRIVE. */ |
| filename = set_device (to_drive); |
| |
| if (errnum) { |
| /* No device specified. Default to the root device. */ |
| current_drive = saved_drive; |
| //current_partition = saved_partition; |
| filename = 0; |
| errnum = 0; |
| } |
| |
| to = current_drive; |
| if (to == FB_DRIVE) |
| to = (unsigned char)(fb_status >> 8)/* & 0xff*/; |
| |
| if (! (to & 0x80) && in_situ) |
| return ! (errnum = ERR_IN_SITU_FLOPPY); |
| |
| /* if mem device is used, assume the --mem option */ |
| if (to == 0xffff || to == ram_drive || from == ram_drive) |
| { |
| if (mem == -1ULL) |
| mem = 0; |
| } |
| |
| if (mem != -1ULL && in_situ) |
| return ! (errnum = ERR_IN_SITU_MEM); |
| |
| if (in_situ == 1) |
| { |
| unsigned long current_partition_bak; |
| char *filename_bak; |
| char buf[16]; |
| |
| current_partition_bak = current_partition; |
| filename_bak = filename; |
| |
| /* read the first sector of drive TO */ |
| grub_sprintf (buf, "(%d)+1", to); |
| if (! grub_open (buf)) |
| return 0; |
| |
| if (grub_read ((unsigned long long)SCRATCHADDR, SECTOR_SIZE, 0xedde0d90) != SECTOR_SIZE) |
| { |
| grub_close (); |
| |
| /* This happens, if the file size is less than 512 bytes. */ |
| if (errnum == ERR_NONE) |
| errnum = ERR_EXEC_FORMAT; |
| |
| return 0; |
| } |
| grub_close (); |
| |
| current_partition = current_partition_bak; |
| filename = filename_bak; |
| |
| /* try to find an empty entry in the partition table */ |
| for (i = 0; i < 4; i++) |
| { |
| if (! *(((char *)SCRATCHADDR) + 0x1C2 + i * 16)) |
| break; /* consider partition type 00 as empty */ |
| if (! *(((char *)SCRATCHADDR) + 0x1C0 + i * 16) & 63) |
| break; /* invalid start sector number of 0 */ |
| if (! *(((char *)SCRATCHADDR) + 0x1C4 + i * 16) & 63) |
| break; /* invalid end sector number of 0 */ |
| if (! *(unsigned long *)(((char *)SCRATCHADDR) + 0x1C6 + i * 16)) |
| break; /* invalid start LBA of 0 */ |
| if (! *(unsigned long *)(((char *)SCRATCHADDR) + 0x1CA + i * 16)) |
| break; /* invalid sector count of 0 */ |
| } |
| |
| if (i >= 4) /* No empty entry. The partition table is full. */ |
| return ! (errnum = ERR_PARTITION_TABLE_FULL); |
| } |
| |
| if ((current_partition == 0xFFFFFF || (to >= 0x80 && to <= 0xFF)) && filename && (*filename == 0x20 || *filename == 0x09)) |
| { |
| if (to == 0xffff /* || to == ram_drive */) |
| { |
| if (((long long)mem) <= 0) |
| { |
| //grub_printf ("When mapping whole mem device at a fixed location, you must specify --mem to a value > 0.\n"); |
| return ! (errnum = ERR_MD_BASE); |
| } |
| start_sector = (unsigned long long)mem; |
| sector_count = 1; |
| //goto map_whole_drive; |
| }else if (to == ram_drive) |
| { |
| /* always consider this to be a fixed memory mapping */ |
| if ((rd_base & 0x1ff) || ! rd_base) |
| return ! (errnum = ERR_RD_BASE); |
| to = 0xffff; |
| mem = (rd_base >> SECTOR_BITS); |
| start_sector = (unsigned long long)mem; |
| sector_count = 1; |
| //goto map_whole_drive; |
| }else{ |
| /* when whole drive is mapped, the geometry should not be specified. */ |
| if ((long long)heads_per_cylinder > 0 || (long long)sectors_per_track > 0) |
| return ! (errnum = ERR_SPECIFY_GEOM); |
| /* when whole drive is mapped, the mem option should not be specified. |
| * but when we delete a drive map slot, the mem option means force. |
| */ |
| if (mem != -1ULL && to != from) |
| return ! (errnum = ERR_SPECIFY_MEM); |
| |
| sectors_per_track = 1;/* 1 means the specified geometry will be ignored. */ |
| heads_per_cylinder = 1;/* can be any value but ignored since #sectors==1. */ |
| /* Note: if the user do want to specify geometry for whole drive map, then |
| * use a command like this: |
| * |
| * map --heads=H --sectors-per-track=S (hd0)+1 (hd1) |
| * |
| * where S > 1 |
| */ |
| goto map_whole_drive; |
| } |
| } |
| |
| if (mem == -1ULL) |
| { |
| query_block_entries = -1; /* query block list only */ |
| blocklist_func (to_drive, flags); |
| if (errnum) |
| return 0; |
| if (query_block_entries != 1 && mem == -1ULL) |
| return ! (errnum = ERR_NON_CONTIGUOUS); |
| |
| start_sector = map_start_sector; /* in big 2048-byte sectors */ |
| //sector_count = map_num_sectors; |
| sector_count = (filemax + 0x1ff) >> SECTOR_BITS; /* in small 512-byte sectors */ |
| |
| if (start_sector == part_start && part_start && sector_count == 1) |
| sector_count = part_length; |
| } |
| |
| if ((to == 0xffff /* || to == ram_drive */) && sector_count == 1) |
| { |
| /* fixed memory mapping */ |
| grub_memmove64 ((unsigned long long)(unsigned long) BS, (start_sector << 9), SECTOR_SIZE); |
| }else{ |
| if (! grub_open (to_drive)) |
| return 0; |
| start_sector = sector_count = 0; |
| rawread_ignore_memmove_overflow = 1; |
| disk_read_hook = disk_read_start_sector_func; |
| /* Read the first sector of the emulated disk. */ |
| err = grub_read ((unsigned long long)(unsigned long) BS, SECTOR_SIZE, 0xedde0d90); |
| disk_read_hook = 0; |
| rawread_ignore_memmove_overflow = 0; |
| if (err != SECTOR_SIZE && from != ram_drive) |
| { |
| grub_close (); |
| /* This happens, if the file size is less than 512 bytes. */ |
| if (errnum == ERR_NONE) |
| errnum = ERR_EXEC_FORMAT; |
| return 0; |
| } |
| |
| to_filesize = gzip_filemax; |
| sector_count = (filemax + 0x1ff) >> SECTOR_BITS; /* in small 512-byte sectors */ |
| if (start_sector == part_start /* && part_start */ && sector_count == 1) |
| { |
| if (mem != -1ULL) |
| { |
| char buf[32]; |
| |
| grub_close (); |
| sector_count = part_length; |
| grub_sprintf (buf, "(%d)%ld+%ld", to, (unsigned long long)part_start, (unsigned long long)part_length); |
| if (! grub_open (buf)) |
| return 0; |
| filepos = SECTOR_SIZE; |
| } else if (part_start) { |
| sector_count = part_length; |
| } |
| } |
| |
| if (mem == -1ULL) |
| grub_close (); |
| if (to == 0xffff && sector_count == 1) |
| { |
| grub_printf ("For mem file in emulation, you should not specify sector_count to 1.\n"); |
| return 0; |
| } |
| } |
| |
| /* measure start_sector in small 512-byte sectors */ |
| if (buf_geom.sector_size == 2048) |
| start_sector *= 4; |
| |
| if (filemax < 512 || BS->boot_signature != 0xAA55) |
| goto geometry_probe_failed; |
| |
| /* probe the BPB */ |
| |
| if (probe_bpb(BS)) |
| goto failed_probe_BPB; |
| |
| if (debug > 0 && ! disable_map_info) |
| grub_printf ("%s BPB found %s 0xEB (jmp) leading the boot sector.\n", |
| filesystem_type == 1 ? "FAT12" : |
| filesystem_type == 2 ? "FAT16" : |
| filesystem_type == 3 ? "FAT32" : |
| filesystem_type == 4 ? "NTFS" : |
| /*filesystem_type == 5 ?*/ "EXT2 GRLDR", |
| (BS->dummy1[0] == (char)0xEB ? "with" : "but WITHOUT")); |
| |
| if (sector_count != 1) |
| { |
| if (debug > 0 && ! disable_map_info) |
| { |
| if (probed_total_sectors > sector_count) |
| grub_printf ("Warning: BPB total_sectors(%ld) is greater than the number of sectors in the whole disk image (%ld). The int13 handler will disable any read/write operations across the image boundary. That means you will not be able to read/write sectors (in absolute address, i.e., lba) %ld - %ld, though they are logically inside your file system.\n", (unsigned long long)probed_total_sectors, (unsigned long long)sector_count, (unsigned long long)sector_count, (unsigned long long)(probed_total_sectors - 1)); |
| else if (probed_total_sectors < sector_count && ! disable_map_info) |
| grub_printf ("info: BPB total_sectors(%ld) is less than the number of sectors in the whole disk image(%ld).\n", (unsigned long long)probed_total_sectors, (unsigned long long)sector_count); |
| } |
| } |
| |
| if (mem == -1ULL && (from & 0x80) && (to & 0x80) && (start_sector == part_start && part_start && sector_count == part_length)/* && BS->hidden_sectors >= probed_sectors_per_track */) |
| { |
| if (BS->hidden_sectors <= probed_sectors_per_track) |
| BS->hidden_sectors = (unsigned long)part_start; |
| extended_part_start = BS->hidden_sectors - probed_sectors_per_track; |
| extended_part_length = probed_total_sectors + probed_sectors_per_track; |
| if (debug > 0 && ! disable_map_info) |
| grub_printf ("\nBPB probed C/H/S = %d/%d/%d, BPB probed total sectors = %ld\n", probed_cylinders, probed_heads, probed_sectors_per_track, (unsigned long long)probed_total_sectors); |
| BPB_H = probed_heads; |
| BPB_S = probed_sectors_per_track; |
| if (in_situ) |
| { |
| //start_sector += probed_sectors_per_track; |
| //sector_count -= probed_sectors_per_track; |
| goto geometry_probe_ok; |
| } |
| |
| if (debug > 0 && ! disable_map_info) |
| grub_printf ("Try to locate extended partition (hd%d)%d+%d for the virtual (hd%d).\n", (to & 0x7f), extended_part_start, extended_part_length, (from & 0x7f)); |
| grub_sprintf ((char *)BS, "(hd%d)%d+%d", (to & 0x7f), extended_part_start, extended_part_length); |
| //j = filesystem_type; /* save filesystem_type */ |
| if (! grub_open ((char *)BS)) |
| return 0; |
| |
| //filesystem_type = j; /* restore filesystem_type */ |
| /* Read the first sector of the emulated disk. */ |
| if (grub_read ((unsigned long long)(unsigned int) BS, SECTOR_SIZE, 0xedde0d90) != SECTOR_SIZE) |
| { |
| grub_close (); |
| |
| /* This happens, if the file size is less than 512 bytes. */ |
| if (errnum == ERR_NONE) |
| errnum = ERR_EXEC_FORMAT; |
| |
| return 0; |
| } |
| grub_close (); |
| for (i = 0; i < 4; i++) |
| { |
| unsigned char sys = BS->P[i].system_indicator; |
| if (sys == 0x05 || sys == 0x0f || sys == 0) |
| { |
| *(long long *)&(BS->P[i].boot_indicator) = 0LL; |
| //*(long long *)&(BS->P[i].start_lba) = 0LL; |
| ((long long *)&(BS->P[i]))[1] = 0LL; |
| } |
| } |
| part_start = extended_part_start; |
| part_length = extended_part_length; |
| start_sector = extended_part_start; |
| sector_count = extended_part_length; |
| |
| /* when emulating a hard disk using a logical partition, the geometry should not be specified. */ |
| if ((long long)heads_per_cylinder > 0 || (long long)sectors_per_track > 0) |
| return ! (errnum = ERR_SPECIFY_GEOM); |
| |
| goto failed_probe_BPB; |
| } |
| //if (probed_cylinders * sectors_per_cylinder == probed_total_sectors) |
| goto geometry_probe_ok; |
| |
| failed_probe_BPB: |
| /* probe the partition table */ |
| |
| if (probe_mbr (BS, start_sector, sector_count, (unsigned long)part_start)) |
| goto geometry_probe_failed; |
| |
| if (sector_count != 1) |
| { |
| if (probed_total_sectors < probed_total_sectors_round && probed_total_sectors_round <= sector_count) |
| probed_total_sectors = probed_total_sectors_round; |
| if (debug > 0 && ! disable_map_info) |
| { |
| if (probed_total_sectors > sector_count) |
| grub_printf ("Warning: total_sectors calculated from partition table(%ld) is greater than the number of sectors in the whole disk image (%ld). The int13 handler will disable any read/write operations across the image boundary. That means you will not be able to read/write sectors (in absolute address, i.e., lba) %ld - %ld, though they are logically inside your emulated virtual disk(according to the partition table).\n", (unsigned long long)probed_total_sectors, (unsigned long long)sector_count, (unsigned long long)sector_count, (unsigned long long)(probed_total_sectors - 1)); |
| else if (probed_total_sectors < sector_count) |
| grub_printf ("info: total_sectors calculated from partition table(%ld) is less than the number of sectors in the whole disk image(%ld).\n", (unsigned long long)probed_total_sectors, (unsigned long long)sector_count); |
| } |
| } |
| |
| goto geometry_probe_ok; |
| |
| geometry_probe_failed: |
| |
| if (BPB_H || BPB_S) |
| { |
| if (mem != -1ULL) |
| grub_close (); |
| return ! (errnum = ERR_EXTENDED_PARTITION); |
| } |
| |
| /* possible ISO9660 image */ |
| if (filemax < 512 || BS->boot_signature != 0xAA55 || (unsigned char)from >= (unsigned char)0xA0) |
| { |
| if ((long long)heads_per_cylinder < 0) |
| heads_per_cylinder = 0; |
| if ((long long)sectors_per_track < 0) |
| sectors_per_track = 0; |
| } |
| |
| if ((long long)heads_per_cylinder < 0) |
| { |
| if (from & 0x80) |
| { |
| if (mem != -1ULL) |
| grub_close (); |
| return ! (errnum = ERR_NO_HEADS); |
| } |
| /* floppy emulation */ |
| switch (sector_count) |
| { |
| /* for the 5 standard floppy disks, offer a value */ |
| case 720: /* 360K */ |
| case 1440: /* 720K */ |
| case 2400: /* 1200K */ |
| case 2880: /* 1440K */ |
| case 5760: /* 2880K */ |
| heads_per_cylinder = 2; break; |
| default: |
| if (sector_count > 1 && sector_count < 5760 ) |
| { |
| heads_per_cylinder = 2; break; |
| } |
| else |
| { |
| if (mem != -1ULL) |
| grub_close (); |
| return ! (errnum = ERR_NO_HEADS); |
| } |
| } |
| if (debug > 0 && ! disable_map_info) |
| grub_printf ("\nAutodetect number-of-heads failed. Use default value %d\n", heads_per_cylinder); |
| } |
| else if (heads_per_cylinder == 0) |
| { |
| if (from & 0x80) |
| { |
| /* hard disk emulation */ |
| heads_per_cylinder = 255; /* 256 */ |
| } |
| else |
| { |
| /* floppy emulation */ |
| switch (sector_count) |
| { |
| case 320: /* 160K */ |
| case 360: /* 180K */ |
| case 500: /* 250K */ |
| heads_per_cylinder = 1; break; |
| case 1: /* a whole-disk emulation */ |
| heads_per_cylinder = 255; break; |
| default: |
| if (sector_count <= 63 * 1024 * 2 + 1) |
| heads_per_cylinder = 2; |
| else |
| heads_per_cylinder = 255; |
| } |
| } |
| if (debug > 0 && ! disable_map_info) |
| if (from < 0xA0) |
| grub_printf ("\nAutodetect number-of-heads failed. Use default value %d\n", heads_per_cylinder); |
| } |
| else |
| { |
| if (debug > 0 && ! disable_map_info) |
| grub_printf ("\nAutodetect number-of-heads failed. Use the specified %d\n", heads_per_cylinder); |
| } |
| |
| if ((long long)sectors_per_track < 0) |
| { |
| if (from & 0x80) |
| { |
| if (mem != -1ULL) |
| grub_close (); |
| return ! (errnum = ERR_NO_SECTORS); |
| } |
| /* floppy emulation */ |
| switch (sector_count) |
| { |
| /* for the 5 standard floppy disks, offer a value */ |
| case 720: /* 360K */ |
| case 1440: /* 720K */ |
| sectors_per_track = 9; break; |
| case 2400: /* 1200K */ |
| sectors_per_track = 15; break; |
| case 2880: /* 1440K */ |
| sectors_per_track = 18; break; |
| case 5760: /* 2880K */ |
| sectors_per_track = 36; break; |
| default: |
| if (sector_count > 1 && sector_count < 2880 ) |
| { |
| sectors_per_track = 18; break; |
| } |
| else if (sector_count > 2880 && sector_count < 5760 ) |
| { |
| sectors_per_track = 36; break; |
| } |
| else |
| { |
| if (mem != -1ULL) |
| grub_close (); |
| return ! (errnum = ERR_NO_SECTORS); |
| } |
| } |
| if (debug > 0 && ! disable_map_info) |
| grub_printf ("\nAutodetect sectors-per-track failed. Use default value %d\n", sectors_per_track); |
| } |
| else if (sectors_per_track == 0) |
| { |
| if (sector_count == 1) |
| sectors_per_track = 1; |
| else if (from & 0x80) |
| { |
| /* hard disk emulation */ |
| sectors_per_track = 63; |
| } |
| else |
| { |
| /* floppy emulation */ |
| switch (sector_count) |
| { |
| case 400: /* 200K */ |
| sectors_per_track = 5; break; |
| case 320: /* 160K */ |
| case 640: /* 320K */ |
| case 1280: /* 640K */ |
| sectors_per_track = 8; break; |
| case 360: /* 180K */ |
| case 720: /* 360K */ |
| case 1440: /* 720K */ |
| case 1458: /* 729K */ |
| case 1476: /* 738K */ |
| case 1494: /* 747K */ |
| case 1512: /* 756K */ |
| sectors_per_track = 9; break; |
| case 500: /* 250K */ |
| case 800: /* 400K */ |
| case 840: /* 420K */ |
| case 1000: /* 500K */ |
| case 1600: /* 800K */ |
| case 1620: /* 810K */ |
| case 1640: /* 820K */ |
| case 1660: /* 830K */ |
| case 1680: /* 840K */ |
| sectors_per_track = 10; break; |
| case 1804: /* 902K */ |
| sectors_per_track = 11; break; |
| case 1968: /* 984K */ |
| sectors_per_track = 12; break; |
| case 2132: /* 1066K */ |
| sectors_per_track = 13; break; |
| case 2400: /* 1200K */ |
| case 2430: /* 1215K */ |
| case 2460: /* 1230K */ |
| case 2490: /* 1245K */ |
| case 2520: /* 1260K */ |
| sectors_per_track = 15; break; |
| case 2720: /* 1360K */ |
| case 2754: /* 1377K */ |
| case 2788: /* 1394K */ |
| case 2822: /* 1411K */ |
| case 2856: /* 1428K */ |
| sectors_per_track = 17; break; |
| case 2880: /* 1440K */ |
| case 2916: /* 1458K */ |
| case 2952: /* 1476K */ |
| case 2988: /* 1494K */ |
| case 3024: /* 1512K */ |
| sectors_per_track = 18; break; |
| case 3116: /* 1558K */ |
| sectors_per_track = 19; break; |
| case 3200: /* 1600K */ |
| case 3240: /* 1620K */ |
| case 3280: /* 1640K */ |
| case 3320: /* 1660K */ |
| sectors_per_track = 20; break; |
| case 3360: /* 1680K */ |
| case 3402: /* 1701K */ |
| case 3444: /* 1722K */ |
| case 3486: /* 1743K */ |
| case 3528: /* 1764K */ |
| sectors_per_track = 21; break; |
| case 3608: /* 1804K */ |
| sectors_per_track = 22; break; |
| case 3772: /* 1886K */ |
| sectors_per_track = 23; break; |
| case 5760: /* 2880K */ |
| sectors_per_track = 36; break; |
| case 6396: /* 3198K */ |
| sectors_per_track = 39; break; |
| case 7216: /* 3608K */ |
| sectors_per_track = 44; break; |
| case 7380: /* 3690K */ |
| sectors_per_track = 45; break; |
| case 7544: /* 3772K */ |
| sectors_per_track = 46; break; |
| default: |
| if (sector_count <= 2881) |
| sectors_per_track = 18; |
| else if (sector_count <= 5761) |
| sectors_per_track = 36; |
| else |
| sectors_per_track = 63; |
| } |
| } |
| if (debug > 0 && ! disable_map_info) |
| if (from < 0xA0) |
| grub_printf ("\nAutodetect sectors-per-track failed. Use default value %d\n", sectors_per_track); |
| } |
| else |
| { |
| if (debug > 0 && ! disable_map_info) |
| grub_printf ("\nAutodetect sectors-per-track failed. Use the specified %d\n", sectors_per_track); |
| } |
| goto map_whole_drive; |
| |
| geometry_probe_ok: |
| |
| if (! disable_map_info) |
| { |
| if (debug > 0) |
| grub_printf ("\nprobed C/H/S = %d/%d/%d, probed total sectors = %ld\n", probed_cylinders, probed_heads, probed_sectors_per_track, (unsigned long long)probed_total_sectors); |
| if (mem != -1ULL && ((long long)mem) <= 0) |
| { |
| if (((unsigned long long)(-mem)) < probed_total_sectors && probed_total_sectors > 1 && filemax >= 512) |
| mem = - (unsigned long long)probed_total_sectors; |
| } |
| } |
| if (BPB_H || BPB_S) |
| if (BPB_H != probed_heads || BPB_S != probed_sectors_per_track) |
| { |
| if (mem != -1ULL) |
| grub_close (); |
| return ! (errnum = ERR_EXTENDED_PARTITION); |
| } |
| |
| if ((long long)heads_per_cylinder <= 0) |
| heads_per_cylinder = probed_heads; |
| else if (heads_per_cylinder != probed_heads) |
| { |
| if (debug > 0 && ! disable_map_info) |
| grub_printf ("\nWarning!! Probed number-of-heads(%d) is not the same as you specified.\nThe specified value %d takes effect.\n", probed_heads, heads_per_cylinder); |
| } |
| |
| if ((long long)sectors_per_track <= 0) |
| sectors_per_track = probed_sectors_per_track; |
| else if (sectors_per_track != probed_sectors_per_track) |
| { |
| if (debug > 0 && ! disable_map_info) |
| grub_printf ("\nWarning!! Probed sectors-per-track(%d) is not the same as you specified.\nThe specified value %d takes effect.\n", probed_sectors_per_track, sectors_per_track); |
| } |
| |
| map_whole_drive: |
| |
| if (from != ram_drive) |
| { |
| /* Search for an empty slot in BIOS_DRIVE_MAP. */ |
| for (i = 0; i < DRIVE_MAP_SIZE; i++) |
| { |
| /* Perhaps the user wants to override the map. */ |
| if (bios_drive_map[i].from_drive == from) |
| break; |
| |
| if (drive_map_slot_empty (bios_drive_map[i])) |
| break; |
| } |
| |
| if (i == DRIVE_MAP_SIZE) |
| { |
| if (mem != -1ULL) |
| grub_close (); |
| errnum = ERR_WONT_FIT; |
| return 0; |
| } |
| |
| /* If TO == FROM and whole drive is mapped, and, no map options occur, then delete the entry. */ |
| if (to == from && read_Only == 0 && fake_write == 0 && disable_lba_mode == 0 |
| && disable_chs_mode == 0 && start_sector == 0 && (sector_count == 0 || |
| /* sector_count == 1 if the user uses a special method to map a whole drive, e.g., map (hd1)+1 (hd0) */ |
| (sector_count == 1 && (long long)heads_per_cylinder <= 0 && (long long)sectors_per_track <= 1))) |
| goto delete_drive_map_slot; |
| } |
| |
| /* check whether TO is being mapped */ |
| //if (mem == -1) |
| for (j = 0; j < DRIVE_MAP_SIZE; j++) |
| { |
| if (unset_int13_handler (1)) |
| continue; /* not hooked */ |
| if (to != hooked_drive_map[j].from_drive) |
| continue; |
| #if 0 |
| if (! (hooked_drive_map[j].max_sector & 0x3F)) |
| disable_chs_mode = 1; |
| |
| /* X=max_sector bit 7: read only or fake write */ |
| /* Y=to_sector bit 6: safe boot or fake write */ |
| /* ------------------------------------------- */ |
| /* X Y: meaning of restrictions imposed on map */ |
| /* ------------------------------------------- */ |
| /* 1 1: read only=0, fake write=1, safe boot=0 */ |
| /* 1 0: read only=1, fake write=0, safe boot=0 */ |
| /* 0 1: read only=0, fake write=0, safe boot=1 */ |
| /* 0 0: read only=0, fake write=0, safe boot=0 */ |
| |
| if (!(read_Only | fake_write | unsafe_boot)) /* no restrictions specified */ |
| switch ((hooked_drive_map[j].max_sector & 0x80) | (hooked_drive_map[j].to_sector & 0x40)) |
| { |
| case 0xC0: read_Only = 0; fake_write = 1; unsafe_boot = 1; break; |
| case 0x80: read_Only = 1; fake_write = 0; unsafe_boot = 1; break; |
| case 0x00: read_Only = 0; fake_write = 0; unsafe_boot = 1; break; |
| /*case 0x40:*/ |
| default: read_Only = 0; fake_write = 0; unsafe_boot = 0; |
| } |
| |
| if (hooked_drive_map[j].max_sector & 0x40) |
| disable_lba_mode = 1; |
| #endif |
| |
| to = hooked_drive_map[j].to_drive; |
| if (to == 0xFF && !(hooked_drive_map[j].to_cylinder & 0x4000)) |
| to = 0xFFFF; /* memory device */ |
| if (start_sector == 0 && (sector_count == 0 || (sector_count == 1 && (long long)heads_per_cylinder <= 0 && (long long)sectors_per_track <= 1))) |
| { |
| sector_count = hooked_drive_map[j].sector_count; |
| heads_per_cylinder = hooked_drive_map[j].max_head + 1; |
| sectors_per_track = (hooked_drive_map[j].max_sector) & 0x3F; |
| } |
| start_sector += hooked_drive_map[j].start_sector; |
| |
| /* If TO == FROM and whole drive is mapped, and, no map options occur, then delete the entry. */ |
| if (to == from && read_Only == 0 && fake_write == 0 && disable_lba_mode == 0 |
| && disable_chs_mode == 0 && start_sector == 0 && (sector_count == 0 || |
| /* sector_count == 1 if the user uses a special method to map a whole drive, e.g., map (hd1)+1 (hd0) */ |
| (sector_count == 1 && (long long)heads_per_cylinder <= 0 && (long long)sectors_per_track <= 1))) |
| { |
| /* yes, delete the FROM drive(with slot[i]), not the TO drive(with slot[j]) */ |
| if (from != ram_drive) |
| goto delete_drive_map_slot; |
| } |
| |
| break; |
| } |
| |
| j = i; /* save i into j */ |
| //grub_printf ("\n debug 4 start_sector=%lX, part_start=%lX, part_length=%lX, sector_count=%lX, filemax=%lX\n", start_sector, part_start, part_length, sector_count, filemax); |
| |
| #ifndef GRUB_UTIL |
| /* how much memory should we use for the drive emulation? */ |
| if (mem != -1ULL) |
| { |
| unsigned long long start_byte; |
| unsigned long long bytes_needed; |
| unsigned long long base; |
| unsigned long long top_end; |
| |
| bytes_needed = base = top_end = 0ULL; |
| //if (to == 0xff) |
| //{ |
| // |
| //}else{ |
| if (start_sector == part_start && part_start == 0 && sector_count == 1) |
| sector_count = part_length; |
| |
| /* For GZIP disk image if uncompressed size >= 4GB, |
| high bits of filemax is wrong, sector_count is also wrong. */ |
| #if 0 |
| if ( compressed_file && (sector_count < probed_total_sectors) && filesystem_type > 0 ) |
| { /* adjust high bits of filemax and sector_count */ |
| unsigned long sizehi = (unsigned long)(probed_total_sectors >> (32-SECTOR_BITS)); |
| if ( (unsigned long)filemax < (unsigned long)(probed_total_sectors << SECTOR_BITS) ) |
| ++sizehi; |
| fsmax = filemax += (unsigned long long)sizehi << 32; |
| sector_count = filemax >> SECTOR_BITS; |
| grub_printf("Uncompressed size is probably %ld sectors\n",sector_count); |
| } |
| #endif |
| if ( (long long)mem < 0LL && sector_count < (-mem) ) |
| bytes_needed = (-mem) << SECTOR_BITS; |
| else |
| bytes_needed = sector_count << SECTOR_BITS; |
| |
| /* filesystem_type |
| * 0 an MBR device |
| * 1 FAT12 |
| * 2 FAT16 |
| * 3 FAT32 |
| * 4 NTFS |
| * -1 unknown filesystem(do not care) |
| * |
| * Note: An MBR device is a whole disk image that has a partition table. |
| */ |
| |
| if (add_mbt<0) |
| add_mbt = (filesystem_type > 0 && (from & 0x80) && (from < 0xA0))? 1: 0; /* known filesystem without partition table */ |
| |
| if (add_mbt) |
| bytes_needed += sectors_per_track << SECTOR_BITS; /* build the Master Boot Track */ |
| |
| bytes_needed = ((bytes_needed+4095)&(-4096ULL)); /* 4KB alignment */ |
| //} |
| if ((to == 0xffff || to == ram_drive) && sector_count == 1) |
| /* mem > 0 */ |
| bytes_needed = 0; |
| //base = 0; |
| |
| start_byte = start_sector << SECTOR_BITS; |
| if (to == ram_drive) |
| start_byte += rd_base; |
| /* we can list the total memory thru int15/E820. on the other hand, we can |
| * see thru our drive map slots how much memory have already been used for |
| * drive emulation. */ |
| /* the available memory can be calculated thru int15 and the slots. */ |
| /* total memory can always be calculated thru unhooked int15 */ |
| /* used memory can always be calculated thru drive map slots */ |
| /* the int15 handler: |
| * if not E820, return to the original int15 |
| * for each E820 usable memory, check how much have been used in slot, |
| * and return the usable memory minus used memory. |
| */ |
| /* once int13 hooked and at least 1 slot uses mem==1, also hook int15 |
| */ |
| |
| if (map_mem_max > 0x100000000ULL && ! is64bit) |
| map_mem_max = 0x100000000ULL; |
| if (map_mem_min < 0x100000ULL) |
| map_mem_min = 0x100000ULL; |
| |
| if (mbi.flags & MB_INFO_MEM_MAP) |
| { |
| struct AddrRangeDesc *map = (struct AddrRangeDesc *) saved_mmap_addr; |
| unsigned long end_addr = saved_mmap_addr + saved_mmap_length; |
| |
| for (; end_addr > (unsigned long) map; map = (struct AddrRangeDesc *) (((int) map) + 4 + map->size)) |
| { |
| unsigned long long tmpbase, tmpend, tmpmin; |
| if (map->Type != MB_ARD_MEMORY) |
| continue; |
| tmpmin = (map->BaseAddr > map_mem_min) ? |
| map->BaseAddr : map_mem_min; |
| tmpmin = ((tmpmin+4095)&(-4096ULL));/* 4KB alignment, round up */ |
| tmpend = (map->BaseAddr + map->Length < map_mem_max) ? |
| map->BaseAddr + map->Length : map_mem_max; |
| tmpend &= (-4096ULL); /* 4KB alignment, round down */ |
| if (tmpend < bytes_needed) |
| continue; |
| tmpbase = tmpend - bytes_needed; // maximum possible base for this region |
| //grub_printf("range b %lx l %lx -- tm %lx te %lx tb %lx\n",map->BaseAddr,map->Length,tmpmin,tmpend,tmpbase); |
| if (((long long)mem) > 0)//force the base value |
| { |
| if (tmpbase >= (mem << 9)) |
| tmpbase = (mem << 9); // move tmpbase down to forced value |
| else // mem base exceed maximum possible base for this region |
| continue; |
| } |
| if (tmpbase < tmpmin) // base fall below minimum address for this region |
| continue; |
| |
| for (i = 0; i < DRIVE_MAP_SIZE; i++) |
| { |
| |
| if (drive_map_slot_empty (bios_drive_map[i])) |
| break; |
| |
| /* TO_DRIVE == 0xFF indicates a MEM map */ |
| if (bios_drive_map[i].to_drive == 0xFF && !(bios_drive_map[i].to_cylinder & 0x4000)) |
| { |
| unsigned long long drvbase, drvend; |
| drvbase = (bios_drive_map[i].start_sector << SECTOR_BITS); |
| drvend = (bios_drive_map[i].sector_count << SECTOR_BITS) + drvbase; |
| drvend = ((drvend+4095)&(-4096ULL));/* 4KB alignment, round up */ |
| drvbase &= (-4096ULL); /* 4KB alignment, round down */ |
| //grub_printf("drv %02x: db %lx de %lx -- tb %lx te %lx\n",bios_drive_map[i].from_drive,drvbase,drvend,tmpbase,tmpend); |
| if (tmpbase < drvend && drvbase < tmpend) |
| { // overlapped address, move tmpend and tmpbase down |
| tmpend = drvbase; |
| if (tmpend >= bytes_needed) |
| { |
| if ((long long)mem <= 0) |
| { // decrease tmpbase |
| tmpbase = tmpend - bytes_needed; |
| if (tmpbase >= tmpmin) |
| { // recheck new tmpbase |
| i = -1; continue; |
| } |
| } |
| else |
| { // force base value, cannot decrease tmpbase |
| /* changed "<" to "<=". -- tinybit */ |
| if (tmpbase <= tmpend - bytes_needed) |
| { // there is still enough space below drvbase |
| continue; |
| } |
| } |
| } |
| /* not enough room for this memory area */ |
| // grub_printf("region can't be used bn %lx te %lx tb %lx\n",bytes_needed,tmpend,tmpbase); |
| tmpbase = 0; break; |
| } |
| } |
| } /* for (i = 0; i < DRIVE_MAP_SIZE; i++) */ |
| |
| if (tmpbase >= tmpmin) |
| { |
| /* check if the memory area overlaps the (md)... or (rd)... file. */ |
| if ( (to != 0xffff && to != ram_drive) /* TO is not in memory */ |
| || ((long long)mem) > 0 /* TO is in memory but is mapped at a fixed location */ |
| || !compressed_file /* TO is in memory and is normally mapped and uncompressed */ |
| /* Now TO is in memory and is normally mapped and compressed */ |
| || tmpbase + bytes_needed <= start_byte /* XXX: destination is below the gzip image */ |
| || tmpbase >= start_byte + to_filesize) /* XXX: destination is above the gzip image */ |
| { |
| if (prefer_top) |
| { |
| if (base < tmpbase) |
| { |
| base = tmpbase; top_end = tmpend; |
| } |
| continue; // find available region with highest address |
| } |
| else |
| { |
| base = tmpbase; top_end = tmpend; |
| break; // use the first available region |
| } |
| } |
| else |
| /* destination overlaps the gzip image */ |
| /* fail and try next memory block. */ |
| continue; |
| } |
| //if (to == 0xff) |
| //bytes_needed = 0; |
| |
| } /* for (; end_addr > (int) map; map = (struct AddrRangeDesc *) (((int) map) + 4 + map->size)) */ |
| |
| } /* if (mbi.flags & MB_INFO_MEM_MAP) */ |
| else |
| grub_printf ("\nFatal: Your BIOS has no support for System Memory Map(INT15/EAX=E820h).\nAs a result you cannot use the --mem option.\n"); |
| |
| if (base < map_mem_min) |
| { |
| grub_close (); |
| return ! (errnum = ERR_WONT_FIT); |
| } |
| |
| if (((long long)mem) > 0) |
| { |
| base = ((unsigned long long)mem << 9); |
| sector_count = (top_end - base) >> SECTOR_BITS; |
| }else{ |
| sector_count = bytes_needed >> SECTOR_BITS; |
| // now sector_count may be > part_length, reading so many sectors could cause failure |
| } |
| |
| bytes_needed = base; |
| if (add_mbt) /* no partition table */ |
| bytes_needed += sectors_per_track << SECTOR_BITS; /* build the Master Boot Track */ |
| |
| /* bytes_needed points to the first partition, base points to MBR */ |
| |
| //#undef MIN_EMU_BASE |
| // if (! grub_open (filename1)) |
| // return 0; |
| |
| /* the first sector already read at BS */ |
| #if 0 |
| if ((to != 0xffff && to != ram_drive) || ((long long)mem) <= 0) |
| { |
| #endif |
| /* if image is in memory and not compressed, we can simply move it. */ |
| if ((to == 0xffff || to == ram_drive) && !compressed_file) |
| { |
| if (bytes_needed != start_byte) |
| grub_memmove64 (bytes_needed, start_byte, filemax); |
| } else { |
| unsigned long long read_result; |
| grub_memmove64 (bytes_needed, (unsigned long long)(unsigned int)BS, SECTOR_SIZE); |
| /* read the rest of the sectors */ |
| if (filemax > SECTOR_SIZE) |
| { |
| read_result = grub_read ((bytes_needed + SECTOR_SIZE), -1ULL, 0xedde0d90); |
| if (read_result != filemax - SECTOR_SIZE) |
| { |
| //if ( !probed_total_sectors || read_result<(probed_total_sectors<<SECTOR_BITS) ) |
| //{ |
| unsigned long long required = (probed_total_sectors << SECTOR_BITS) - SECTOR_SIZE; |
| /* read again only required sectors */ |
| if ( ! probed_total_sectors |
| || required >= filemax - SECTOR_SIZE |
| || ( (filepos = SECTOR_SIZE), /* re-read from the second sector. */ |
| grub_read (bytes_needed + SECTOR_SIZE, required, 0xedde0d90) != required |
| ) |
| ) |
| { |
| grub_close (); |
| if (errnum == ERR_NONE) |
| errnum = ERR_READ; |
| return 0; |
| } |
| //} |
| } |
| } |
| } |
| grub_close (); |
| #if 0 |
| } |
| else if (/*(to == 0xffff || to == ram_drive) && */!compressed_file) |
| { |
| if (bytes_needed != start_byte) |
| grub_memmove64 (bytes_needed, start_byte, filemax); |
| grub_close (); |
| } |
| else |
| { |
| grub_memmove64 (bytes_needed, (unsigned long long)(unsigned int)BS, SECTOR_SIZE); |
| grub_read (bytes_needed + SECTOR_SIZE, -1ULL, 0xedde0d90); |
| grub_close (); |
| } |
| #endif |
| start_sector = base >> SECTOR_BITS; |
| to = 0xFFFF/*GRUB_INVALID_DRIVE*/; |
| |
| if (add_mbt) /* no partition table */ |
| { |
| unsigned long sectors_per_cylinder1, cylinder, sector_rem; |
| unsigned long head, sector; |
| |
| /* First sector of disk image has already been read to buffer BS/mbr */ |
| |
| /* modify the BPB drive number. required for FAT12/16/32/NTFS */ |
| if (filesystem_type != -1) |
| if (!*(char *)((int)BS + ((filesystem_type == 3) ? 0x41 : 0x25))) |
| *(char *)((int)BS + ((filesystem_type == 3) ? 0x40 : 0x24)) = from; |
| |
| /* modify the BPB hidden sectors. required for FAT12/16/32/NTFS/EXT2 */ |
| if (filesystem_type != -1 || *(unsigned long *)((int)BS + 0x1c) == (unsigned long)part_start) |
| *(unsigned long *)((int)BS + 0x1c) = sectors_per_track; |
| |
| grub_memmove64 (bytes_needed, (unsigned long long)(unsigned int)BS, SECTOR_SIZE); |
| |
| /* clear BS/mbr buffer */ |
| grub_memset(mbr, 0, SECTOR_SIZE); |
| |
| /* clear MS magic number */ |
| //*(long *)((int)mbr + 0x1b8) = 0; |
| /* Let MS magic number = virtual BIOS drive number */ |
| *(long *)((int)mbr + 0x1b8) = (unsigned char)from; |
| /* build the partition table */ |
| *(long *)((int)mbr + 0x1be) = 0x00010180L; |
| *(char *)((int)mbr + 0x1c2) = //((filesystem_type == -1 || filesystem_type == 5)? 0x83 : filesystem_type == 4 ? 0x07 : 0x0c); |
| filesystem_type == 1 ? 0x0E /* FAT12 */ : |
| filesystem_type == 2 ? 0x0E /* FAT16 */ : |
| filesystem_type == 3 ? 0x0C /* FAT32 */ : |
| filesystem_type == 4 ? 0x07 /* NTFS */ : |
| /*filesystem_type == 5 ?*/ 0x83 /* EXT2 */; |
| |
| //sector_count += sectors_per_track; /* already incremented above */ |
| |
| /* calculate the last sector's C/H/S value */ |
| sectors_per_cylinder1 = sectors_per_track * heads_per_cylinder; |
| cylinder = ((unsigned long)(sector_count - 1)) / sectors_per_cylinder1; /* XXX: 64-bit div */ |
| sector_rem = ((unsigned long)(sector_count - 1)) % sectors_per_cylinder1; /* XXX: 64-bit mod */ |
| head = sector_rem / (unsigned long)sectors_per_track; |
| sector = sector_rem % (unsigned long)sectors_per_track; |
| sector++; |
| *(char *)((int)mbr + 0x1c3) = head; |
| *(unsigned short *)((int)mbr + 0x1c4) = sector | (cylinder << 8) | ((cylinder >> 8) << 6); |
| *(unsigned long *)((int)mbr + 0x1c6) = sectors_per_track; /* start LBA */ |
| *(unsigned long *)((int)mbr + 0x1ca) = sector_count - sectors_per_track; /* sector count */ |
| *(long long *)((int)mbr + 0x1ce) = 0LL; |
| *(long long *)((int)mbr + 0x1d6) = 0LL; |
| *(long long *)((int)mbr + 0x1de) = 0LL; |
| *(long long *)((int)mbr + 0x1e6) = 0LL; |
| *(long long *)((int)mbr + 0x1ee) = 0LL; |
| *(long long *)((int)mbr + 0x1f6) = 0LL; |
| *(unsigned short *)((int)mbr + 0x1fe) = 0xAA55; |
| |
| /* compose a master boot record routine */ |
| *(char *)((int)mbr) = 0xFA; /* cli */ |
| *(unsigned short *)((int)mbr + 0x01) = 0xC033; /* xor AX,AX */ |
| *(unsigned short *)((int)mbr + 0x03) = 0xD08E; /* mov SS,AX */ |
| *(long *)((int)mbr + 0x05) = 0xFB7C00BC; /* mov SP,7C00 ; sti */ |
| *(long *)((int)mbr + 0x09) = 0x07501F50; /* push AX; pop DS */ |
| /* push AX; pop ES */ |
| *(long *)((int)mbr + 0x0d) = 0x7C1CBEFC; /* cld; mov SI,7C1C */ |
| *(long *)((int)mbr + 0x11) = 0x50061CBF; /* mov DI,061C ; push AX */ |
| *(long *)((int)mbr + 0x15) = 0x01E4B957; /* push DI ; mov CX, 01E4 */ |
| *(long *)((int)mbr + 0x19) = 0x1ECBA4F3; /* repz movsb;retf;push DS */ |
| *(long *)((int)mbr + 0x1d) = 0x537C00BB; /* mov BX,7C00 ; push BX */ |
| *(long *)((int)mbr + 0x21) = 0x520180BA; /* mov DX,0180 ; push DX */ |
| *(long *)((int)mbr + 0x25) = 0x530201B8; /* mov AX,0201 ; push BX */ |
| *(long *)((int)mbr + 0x29) = 0x5F13CD41; /* inc CX; int 13; pop DI */ |
| *(long *)((int)mbr + 0x2d) = 0x5607BEBE; /* mov SI,07BE ; push SI */ |
| *(long *)((int)mbr + 0x31) = 0xCBFA5A5D; /* pop BP;pop DX;cli;retf */ |
| grub_memmove64 (base, (unsigned long long)(unsigned int)mbr, SECTOR_SIZE); |
| } |
| else if ((from & 0x80) && (from < 0xA0)) /* the virtual drive is hard drive */ |
| { |
| /* First sector of disk image has already been read to buffer BS/mbr */ |
| if (*(long *)((int)mbr + 0x1b8) == 0) |
| /* Let MS magic number = virtual BIOS drive number */ |
| *(long *)((int)mbr + 0x1b8) = (unsigned char)from; |
| else if ((*(long *)((int)mbr + 0x1b8) & 0xFFFFFF00) == 0) |
| *(long *)((int)mbr + 0x1b8) |= (from << 8); |
| grub_memmove64 (base, (unsigned long long)(unsigned int)mbr, SECTOR_SIZE); |
| } |
| |
| /* if FROM is (rd), no mapping is established. but the image will be |
| * loaded into memory, and (rd) will point to it. Note that Master |
| * Boot Track and MBR code have been built as above when needed |
| * for ram_drive > 0x80. |
| */ |
| if (from == ram_drive) |
| { |
| rd_base = base; |
| rd_size = filemax;//(sector_count << SECTOR_BITS); |
| if (add_mbt) |
| rd_size += sectors_per_track << SECTOR_BITS; /* build the Master Boot Track */ |
| return 1; |
| } |
| } |
| #endif /* GRUB_UTIL */ |
| |
| if (in_situ) |
| bios_drive_map[j].to_cylinder = |
| filesystem_type == 1 ? 0x0E /* FAT12 */ : |
| filesystem_type == 2 ? 0x0E /* FAT16 */ : |
| filesystem_type == 3 ? 0x0C /* FAT32 */ : |
| filesystem_type == 4 ? 0x07 /* NTFS */ : |
| /*filesystem_type == 5 ?*/ 0x83 /* EXT2 */; |
| |
| /* if TO_DRIVE is whole floppy, skip the geometry lookup. */ |
| if (start_sector == 0 && sector_count == 0 && to < 0x04) |
| { |
| tmp_geom.flags &= ~BIOSDISK_FLAG_LBA_EXTENSION; |
| tmp_geom.sector_size = 512; |
| tmp_geom.cylinders = 80; /* does not care */ |
| tmp_geom.heads = 2; /* does not care */ |
| tmp_geom.sectors = 18; /* does not care */ |
| } |
| else |
| /* Get the geometry. This ensures that the drive is present. */ |
| if (to != PXE_DRIVE && get_diskinfo (to, &tmp_geom)) |
| { |
| return ! (errnum = ERR_NO_DISK); |
| } |
| |
| i = j; /* restore i from j */ |
| |
| bios_drive_map[i].from_drive = from; |
| bios_drive_map[i].to_drive = (unsigned char)to; /* to_drive = 0xFF if to == 0xffff */ |
| |
| /* if CHS disabled, let MAX_HEAD != 0 to ensure a non-empty slot */ |
| bios_drive_map[i].max_head = disable_chs_mode | (heads_per_cylinder - 1); |
| bios_drive_map[i].max_sector = (disable_chs_mode ? 0 : in_situ ? 1 : sectors_per_track) | ((read_Only | fake_write) << 7) | (disable_lba_mode << 6); |
| |
| /* bit 12 is for "TO drive is bifurcate" */ |
| |
| if (! in_situ) |
| bios_drive_map[i].to_cylinder = |
| ((tmp_geom.flags & BIOSDISK_FLAG_BIFURCATE) ? ((to & 0x100) >> 1) : |
| ((tmp_geom.flags & BIOSDISK_FLAG_LBA_EXTENSION) << 15)) | |
| ((tmp_geom.sector_size == 2048) << 14) | |
| ((from >= 0xA0) << 13) | /* assume cdrom if from_drive is 0xA0 or greater */ |
| ((!!(tmp_geom.flags & BIOSDISK_FLAG_BIFURCATE)) << 12) | |
| ((filesystem_type > 0) << 11) | /* has a known boot sector type */ |
| ((tmp_geom.cylinders - 1 > 0x3FF) ? 0x3FF : (tmp_geom.cylinders - 1)); |
| |
| bios_drive_map[i].to_head = tmp_geom.heads - 1; |
| |
| bios_drive_map[i].to_sector = tmp_geom.sectors | ((fake_write | ! unsafe_boot) << 6); |
| if (in_situ) |
| bios_drive_map[i].to_sector |= 0x80; |
| |
| bios_drive_map[i].start_sector = start_sector; |
| //bios_drive_map[i].start_sector_hi = 0; /* currently only low 32 bits are used. */ |
| initrd_start_sector = start_sector; |
| |
| bios_drive_map[i].sector_count = sector_count;//(sector_count & 0xfffffffe) | fake_write | ! unsafe_boot; |
| //bios_drive_map[i].sector_count_hi = 0; /* currently only low 32 bits are used. */ |
| |
| #ifndef GRUB_UTIL |
| /* increase the floppies or harddrives if needed */ |
| if (from & 0x80) |
| { |
| if (*((char *)0x475) == (char)(from - 0x80)) |
| { |
| *((char *)0x475) = (char)(from - 0x80 + 1); |
| if (debug > 0 && ! disable_map_info) |
| print_bios_total_drives(); |
| } |
| }else{ |
| if ((((*(char*)0x410) & 1)?((*(char*)0x410) >> 6) + 1 : 0) == ((char)from)) |
| { |
| *((char *)0x410) &= 0x3e; |
| *((char *)0x410) |= (((char)from) ? 0x41 : 1); |
| if (debug > 0 && ! disable_map_info) |
| print_bios_total_drives(); |
| } |
| } |
| #endif /* GRUB_UTIL */ |
| return 1; |
| |
| delete_drive_map_slot: |
| |
| // if (bios_drive_map[i].to_drive == 0xFF && !(bios_drive_map[i].to_cylinder & 0x4000)) |
| // for (j = DRIVE_MAP_SIZE - 1; j > i ; j--) |
| // { |
| // if (bios_drive_map[j].to_drive == 0xFF && !(bios_drive_map[j].to_cylinder & 0x4000)) |
| // { |
| // if (mem == -1) |
| // return ! (errnum = ERR_DEL_MEM_DRIVE); |
| // else /* force delete all subsequent MEM map slots */ |
| // grub_memmove ((char *) &bios_drive_map[j], (char *) &bios_drive_map[j + 1], sizeof (struct drive_map_slot) * (DRIVE_MAP_SIZE - j)); |
| // } |
| // } |
| |
| grub_memmove ((char *) &bios_drive_map[i], (char *) &bios_drive_map[i + 1], sizeof (struct drive_map_slot) * (DRIVE_MAP_SIZE - i)); |
| if (mem != -1ULL) |
| grub_close (); |
| |
| #undef BS |
| |
| #ifndef GRUB_UTIL |
| /* Search for the Max floppy drive number in the drive map table. */ |
| from = 0; |
| for (i = 0; i < DRIVE_MAP_SIZE; i++) |
| { |
| if (drive_map_slot_empty (bios_drive_map[i])) |
| break; |
| if (! (bios_drive_map[i].from_drive & 0x80) && from < bios_drive_map[i].from_drive + 1) |
| from = bios_drive_map[i].from_drive + 1; |
| } |
| |
| /* max possible floppies that can be handled in BIOS Data Area is 4 */ |
| if (from > 4) |
| from = 4; |
| if (from <= ((floppies_orig & 1) ? (floppies_orig >> 6) + 1 : 0)) |
| if ((((*(char*)0x410) & 1) ? ((*(char*)0x410) >> 6) + 1 : 0) > ((floppies_orig & 1) ? (floppies_orig >> 6) + 1 : 0)) |
| { |
| /* decrease the floppies */ |
| (*(char*)0x410) = floppies_orig; |
| if (debug > 0) |
| print_bios_total_drives(); |
| } |
| |
| /* Search for the Max hard drive number in the drive map table. */ |
| from = 0; |
| for (i = 0; i < DRIVE_MAP_SIZE; i++) |
| { |
| if (drive_map_slot_empty (bios_drive_map[i])) |
| break; |
| if ((bios_drive_map[i].from_drive & 0x80) && from < bios_drive_map[i].from_drive - 0x80 + 1) |
| from = bios_drive_map[i].from_drive - 0x80 + 1; |
| } |
| |
| if (from <= harddrives_orig) |
| if ((*(char*)0x475) > harddrives_orig) |
| { |
| /* decrease the harddrives */ |
| (*(char*)0x475) = harddrives_orig; |
| if (debug > 0) |
| print_bios_total_drives(); |
| } |
| |
| #endif /* ! GRUB_UTIL */ |
| return 1; |
| } |
| |
| static struct builtin builtin_map = |
| { |
| "map", |
| map_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "map [--status] [--mem[=RESERV]] [--hook] [--unhook] [--unmap=DRIVES]\n [--rehook] [--floppies=M] [--harddrives=N] [--memdisk-raw=RAW]\n [--a20-keep-on=AKO] [--safe-mbr-hook=SMH] [--int13-scheme=SCH]\n [--ram-drive=RD] [--rd-base=ADDR] [--rd-size=SIZE] [[--read-only]\n [--fake-write] [--unsafe-boot] [--disable-chs-mode] [--disable-lba-mode]\n [--heads=H] [--sectors-per-track=S] TO_DRIVE FROM_DRIVE]", |
| "Map the drive FROM_DRIVE to the drive TO_DRIVE. This is necessary" |
| " when you chain-load some operating systems, such as DOS, if such an" |
| " OS resides at a non-first drive. TO_DRIVE can be a disk file, this" |
| " indicates a disk emulation." |
| " If --read-only is given, the" |
| " emulated drive will be write-protected. If --fake-write is given," |
| " any write operations to the emulated drive are allowed but the data" |
| " written will be discarded. The --unsafe-boot switch enables the write" |
| " to the Master and DOS boot sectors of the emulated disk." |
| " If --disable-chs-mode is given, CHS access to the emulated drive will" |
| " be refused. If --disable-lba-mode is given, LBA access to the emulated" |
| " drive will be refused." |
| " if RAW=1," |
| " all memdrives will be accessed without using int15/ah=87h. if RAW=0, then" |
| " int15/ah=87h will be used to access memdrives." |
| " If one of --status, --hook, --unhook, --rehook, --floppies, --harddrives," |
| " --memdisk-raw, --a20-keep-on, --safe-mbr-hook, --int13-scheme," |
| " --ram-drive, --rd-base or --rd-size is" |
| " given, then any other command-line arguments will be ignored." |
| " The --mem option indicates a drive in" |
| " memory. if RESERV is used and <= 0, the minimum memory occupied by the" |
| " memdrive is (-RESERV) in 512-byte-sectors. if RESERV is used and > 0," |
| " the memdrive will occupy the mem area starting at absolute physical" |
| " address RESERV in 512-byte-sectors and ending at the end of this mem" |
| " block(usually the end of physical mem)." |
| }; |
| #endif /* ! GRUB_UTIL */ |
| |
| |
| #ifdef USE_MD5_PASSWORDS |
| /* md5crypt */ |
| static int |
| md5crypt_func (char *arg, int flags) |
| { |
| char crypted[36]; |
| char key[32]; |
| unsigned int seed; |
| int i; |
| const char *const seedchars = |
| "./0123456789ABCDEFGHIJKLMNOPQRST" |
| "UVWXYZabcdefghijklmnopqrstuvwxyz"; |
| |
| /* First create a salt. */ |
| |
| /* The magical prefix. */ |
| grub_memset (crypted, 0, sizeof (crypted)); |
| grub_memmove (crypted, "$1$", 3); |
| |
| /* Create the length of a salt. */ |
| #ifdef GRUB_UTIL |
| seed = currticks (); |
| #else |
| seed = *(unsigned int *)0x46C; |
| #endif |
| |
| /* Generate a salt. */ |
| for (i = 0; i < 8 && seed; i++) |
| { |
| /* FIXME: This should be more random. */ |
| crypted[3 + i] = seedchars[seed & 0x3f]; |
| seed >>= 6; |
| } |
| |
| /* A salt must be terminated with `$', if it is less than 8 chars. */ |
| crypted[3 + i] = '$'; |
| |
| #ifdef DEBUG_MD5CRYPT |
| grub_printf ("salt = %s\n", crypted); |
| #endif |
| |
| /* Get a password. */ |
| grub_memset (key, 0, sizeof (key)); |
| get_cmdline_str.prompt = "Password: "; |
| get_cmdline_str.maxlen = sizeof (key) - 1; |
| get_cmdline_str.echo_char = '*'; |
| get_cmdline_str.readline = 0; |
| get_cmdline_str.cmdline = key; |
| get_cmdline (get_cmdline_str); |
| |
| /* Crypt the key. */ |
| make_md5_password (key, crypted); |
| |
| grub_printf ("Encrypted: %s\n", crypted); |
| return 1; |
| } |
| |
| static struct builtin builtin_md5crypt = |
| { |
| "md5crypt", |
| md5crypt_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "md5crypt", |
| "Generate a password in MD5 format." |
| }; |
| #endif /* USE_MD5_PASSWORDS */ |
| |
| |
| /* module */ |
| static int |
| module_func (char *arg, int flags) |
| { |
| int len = grub_strlen (arg); |
| |
| switch (kernel_type) |
| { |
| case KERNEL_TYPE_MULTIBOOT: |
| if (mb_cmdline + len + 1 > (char *) MB_CMDLINE_BUF + MB_CMDLINE_BUFLEN) |
| { |
| errnum = ERR_WONT_FIT; |
| return 0; |
| } |
| grub_memmove (mb_cmdline, arg, len + 1); |
| if (! load_module (arg, mb_cmdline)) |
| return 0; |
| mb_cmdline += len + 1; |
| break; |
| |
| case KERNEL_TYPE_LINUX: |
| case KERNEL_TYPE_BIG_LINUX: |
| if (! load_initrd (arg)) |
| return 0; |
| break; |
| |
| default: |
| errnum = ERR_NEED_MB_KERNEL; |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| static struct builtin builtin_module = |
| { |
| "module", |
| module_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "module FILE [ARG ...]", |
| "Load a boot module FILE for a Multiboot format boot image (no" |
| " interpretation of the file contents is made, so users of this" |
| " command must know what the kernel in question expects). The" |
| " rest of the line is passed as the \"module command line\", like" |
| " the `kernel' command." |
| }; |
| |
| |
| /* modulenounzip */ |
| static int |
| modulenounzip_func (char *arg, int flags) |
| { |
| int ret; |
| #ifndef NO_DECOMPRESSION |
| int no_decompression_bak = no_decompression; |
| #endif |
| |
| #ifndef NO_DECOMPRESSION |
| no_decompression = 1; |
| #endif |
| |
| ret = module_func (arg, flags); |
| |
| #ifndef NO_DECOMPRESSION |
| no_decompression = no_decompression_bak; |
| #endif |
| |
| return ret; |
| } |
| |
| static struct builtin builtin_modulenounzip = |
| { |
| "modulenounzip", |
| modulenounzip_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "modulenounzip FILE [ARG ...]", |
| "The same as `module', except that automatic decompression is" |
| " disabled." |
| }; |
| |
| #ifdef SUPPORT_GRAPHICS |
| |
| /* outline [on | off | status] */ |
| static int |
| outline_func (char *arg, int flags) |
| { |
| |
| /* If ARG is empty, toggle the flag. */ |
| if (! *arg) |
| outline = ! outline; |
| else if (grub_memcmp (arg, "on", 2) == 0) |
| outline = 1; |
| else if (grub_memcmp (arg, "off", 3) == 0) |
| outline = 0; |
| else if (grub_memcmp (arg, "status", 6) == 0) |
| { |
| if (debug > 0) |
| grub_printf (" Character outline is now %s\n", (outline ? "on" : "off")); |
| } |
| else |
| errnum = ERR_BAD_ARGUMENT; |
| |
| return outline; |
| } |
| |
| static struct builtin builtin_outline = |
| { |
| "outline", |
| outline_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "outline [on | off | status]", |
| "Turn on/off or display the outline mode, or toggle it if no argument." |
| }; |
| #endif /* SUPPORT_GRAPHICS */ |
| |
| |
| /* pager [on|off] */ |
| static int |
| pager_func (char *arg, int flags) |
| { |
| |
| /* If ARG is empty, toggle the flag. */ |
| if (! *arg) |
| use_pager = ! use_pager; |
| else if (grub_memcmp (arg, "on", 2) == 0) |
| use_pager = 1; |
| else if (grub_memcmp (arg, "off", 3) == 0) |
| use_pager = 0; |
| else if (grub_memcmp (arg, "status", 6) == 0) |
| { |
| if (debug > 0) |
| grub_printf (" Internal pager is now %s\n", (use_pager ? "on" : "off")); |
| } |
| else |
| errnum = ERR_BAD_ARGUMENT; |
| |
| return use_pager; |
| } |
| |
| static struct builtin builtin_pager = |
| { |
| "pager", |
| pager_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "pager [on | off | status]", |
| "Turn on/off or display the pager mode, or toggle it if no argument." |
| }; |
| |
| |
| /* Convert a LBA address to a CHS address in the INT 13 format. */ |
| void |
| lba_to_chs (unsigned long lba, unsigned long *cl, unsigned long *ch, unsigned long *dh) |
| { |
| unsigned long cylinder, head, sector; |
| |
| sector = lba % buf_geom.sectors + 1; |
| head = (lba / buf_geom.sectors) % buf_geom.heads; |
| cylinder = lba / (buf_geom.sectors * buf_geom.heads); |
| |
| if (cylinder > 0x3FF) |
| cylinder = 0x3FF; |
| |
| if (cylinder >= buf_geom.cylinders) |
| cylinder = buf_geom.cylinders - 1; |
| |
| *cl = sector | ((cylinder & 0x300) >> 2); |
| *ch = cylinder & 0xFF; |
| *dh = head; |
| } |
| |
| /* partnew PART TYPE START LEN */ |
| static int |
| partnew_func (char *arg, int flags) |
| { |
| unsigned long long new_type, new_start, new_len; |
| unsigned long start_cl, start_ch, start_dh; |
| unsigned long end_cl, end_ch, end_dh; |
| unsigned long current_drive_bak; |
| unsigned long current_partition_bak; |
| char *filename; |
| unsigned long entry1, i; |
| unsigned long active = -1; |
| #if defined(STAGE1_5) || defined(GRUB_UTIL) |
| // char mbr[512]; |
| #endif |
| |
| if (grub_memcmp (arg, "--active", 8) == 0) |
| { |
| active = 0x80; |
| arg = skip_to (0, arg); |
| } |
| |
| /* Get the drive and the partition. */ |
| if (! set_device (arg)) |
| return 0; |
| |
| /* The drive must be a hard disk. */ |
| if (! (current_drive & 0x80)) |
| { |
| errnum = ERR_BAD_ARGUMENT; |
| return 0; |
| } |
| |
| entry1 = current_partition >> 16; |
| |
| /* The partition must a primary partition. */ |
| if (entry1 > 3 || (current_partition & 0xFFFF) != 0xFFFF) |
| { |
| errnum = ERR_BAD_ARGUMENT; |
| return 0; |
| } |
| |
| /* Get the new partition type. */ |
| arg = skip_to (0, arg); |
| if (! safe_parse_maxint (&arg, &new_type)) |
| return 0; |
| |
| /* The partition type is unsigned char. */ |
| if (new_type > 0xFF) |
| { |
| errnum = ERR_BAD_ARGUMENT; |
| return 0; |
| } |
| |
| /* Get the new partition start and length. */ |
| arg = skip_to (0, arg); |
| filename = arg; |
| |
| current_drive_bak = 0; |
| if ((! safe_parse_maxint (&arg, &new_start)) |
| || ((arg = skip_to (0, arg)), (! safe_parse_maxint (&arg, &new_len)))) |
| { |
| current_drive_bak = current_drive; |
| current_partition_bak = current_partition; |
| arg = filename; |
| filename = set_device (filename); |
| |
| if (errnum) |
| { |
| /* No device specified. Default to the root device. */ |
| current_drive = saved_drive; |
| current_partition = saved_partition; |
| filename = 0; |
| errnum = 0; |
| } |
| |
| if (current_drive != current_drive_bak) |
| { |
| if (debug > 0) |
| grub_printf ("Cannot create a partition in drive %X from a file in drive %X.\n", current_drive_bak, current_drive); |
| errnum = ERR_BAD_ARGUMENT; |
| return 0; |
| } |
| |
| if (current_partition == 0xFFFFFF) |
| { |
| if (debug > 0) |
| grub_printf ("Cannot create a partition with a blocklist of a whole drive.\n"); |
| errnum = ERR_BAD_ARGUMENT; |
| return 0; |
| } |
| |
| query_block_entries = -1; /* query block list only */ |
| blocklist_func (arg, flags); |
| if (errnum == 0) |
| { |
| if (query_block_entries != 1) |
| return ! (errnum = ERR_NON_CONTIGUOUS); |
| new_start = map_start_sector; |
| new_len = (filemax + 0x1ff) >> SECTOR_BITS; |
| } |
| else |
| return ! errnum; |
| |
| if (new_start == part_start && part_start && new_len == 1) |
| new_len = part_length; |
| |
| if (new_start < part_start || new_start + new_len > (unsigned long)(part_start + part_length)) |
| { |
| if (debug > 0) |
| grub_printf ("Cannot create a partition that exceeds the partition boundary.\n"); |
| return ! (errnum = ERR_BAD_ARGUMENT); |
| } |
| |
| /* Read the first sector. */ |
| if (! rawread (current_drive, new_start, 0, SECTOR_SIZE, (unsigned long long)(unsigned int)mbr, 0xedde0d90)) |
| return 0; |
| |
| #define BS ((struct master_and_dos_boot_sector *)mbr) |
| /* try to find out the filesystem type */ |
| if (BS->boot_signature == 0xAA55 && ! probe_bpb(BS)) |
| { |
| if ((new_type & 0xFFFFFFEF) == 0) /* auto filesystem type */ |
| { |
| new_type |= |
| filesystem_type == 1 ? 0x0E /* FAT12 */ : |
| filesystem_type == 2 ? 0x0E /* FAT16 */ : |
| filesystem_type == 3 ? 0x0C /* FAT32 */ : |
| filesystem_type == 4 ? 0x07 /* NTFS */ : |
| /*filesystem_type == 5 ?*/ 0x83 /* EXT2 */; |
| if (filesystem_type == 5) |
| new_type = 0x83; /* EXT2 */ |
| } |
| if (debug > 0) |
| grub_printf ("%s BPB found %s the leading 0xEB (jmp). Hidden sectors=0x%X\n", |
| (filesystem_type == 1 ? "FAT12" : |
| filesystem_type == 2 ? "FAT16" : |
| filesystem_type == 3 ? "FAT32" : |
| filesystem_type == 4 ? "NTFS" : |
| /*filesystem_type == 5 ?*/ "EXT2 GRLDR"), |
| (BS->dummy1[0] == (char)0xEB ? "with" : "but WITHOUT"), |
| BS->hidden_sectors); |
| if (BS->hidden_sectors != new_start) |
| { |
| if (debug > 0) |
| grub_printf ("Changing hidden sectors 0x%X to 0x%lX... ", BS->hidden_sectors, (unsigned long long)new_start); |
| BS->hidden_sectors = new_start; |
| /* Write back/update the boot sector. */ |
| if (! rawwrite (current_drive, new_start, mbr)) |
| { |
| if (debug > 0) |
| grub_printf ("failure.\n"); |
| return 0; |
| } else { |
| if (debug > 0) |
| grub_printf ("success.\n"); |
| } |
| } |
| } |
| #undef BS |
| |
| current_drive = current_drive_bak; |
| current_partition = current_partition_bak; |
| } |
| #if 0 |
| else |
| { |
| /* this command is intended for running in command line and inhibited from running in menu.lst */ |
| if (flags & (BUILTIN_MENU | BUILTIN_SCRIPT)) |
| { |
| if (debug > 0) |
| grub_printf ("This form of partnew is inhibited from running in a script.\n"); |
| return ! (errnum = ERR_BAD_ARGUMENT); |
| } |
| } |
| #endif |
| |
| /* Read the MBR. */ |
| if (! rawread (current_drive, 0, 0, SECTOR_SIZE, (unsigned long long)(unsigned int)mbr, 0xedde0d90)) |
| return 0; |
| |
| if (current_drive_bak) /* creating a partition from a file */ |
| { |
| /* if the entry is not empty, it should be a part of another |
| * partition, that is, it should be covered by another partition. */ |
| if (PC_SLICE_START (mbr, entry1) != 0 || PC_SLICE_LENGTH (mbr, entry1) != 0) |
| { |
| for (i = 0; i < 4; i++) |
| { |
| if (i == entry1) |
| continue; |
| if (PC_SLICE_START (mbr, entry1) < PC_SLICE_START (mbr, i)) |
| continue; |
| if (PC_SLICE_START (mbr, entry1) + PC_SLICE_LENGTH (mbr, entry1) |
| > PC_SLICE_START (mbr, i) + PC_SLICE_LENGTH (mbr, i)) |
| continue; |
| break; /* found */ |
| } |
| if (i >= 4) |
| { |
| /* not found */ |
| if (debug > 0) |
| grub_printf ("Cannot overwrite an independent partition.\n"); |
| return ! (errnum = ERR_BAD_ARGUMENT); |
| } |
| } |
| } |
| |
| #if 0 |
| /* Do not check this. The total_sectors might be too small |
| * for some buggy BIOSes. */ |
| /* Check if the new partition will fit in the disk. */ |
| if (new_start + new_len > buf_geom.total_sectors) |
| { |
| errnum = ERR_GEOM; |
| return 0; |
| } |
| #endif |
| |
| if (new_type == 0 && new_start == 0 && new_len == 0) |
| { |
| /* empty the entry */ |
| start_dh = start_cl = start_ch = end_dh = end_cl = end_ch = 0; |
| }else{ |
| if (new_start == 0 || new_len == 0) |
| { |
| errnum = ERR_BAD_PART_TABLE; |
| return 0; |
| } |
| /* Store the partition information in the MBR. */ |
| lba_to_chs (new_start, &start_cl, &start_ch, &start_dh); |
| lba_to_chs (new_start + new_len - 1, &end_cl, &end_ch, &end_dh); |
| } |
| |
| if (active == 0x80) |
| { |
| /* Activate this partition */ |
| PC_SLICE_FLAG (mbr, entry1) = 0x80; |
| } else { |
| if (PC_SLICE_FLAG (mbr, entry1) != 0x80) |
| PC_SLICE_FLAG (mbr, entry1) = 0; |
| } |
| |
| /* Deactivate other partitions */ |
| if (PC_SLICE_FLAG (mbr, entry1) == 0x80) |
| { |
| for (i = 0; i < 4; i++) |
| { |
| if (i == entry1) |
| continue; |
| if (PC_SLICE_FLAG (mbr, i) != 0) |
| { |
| if (debug > 0) |
| { |
| if (PC_SLICE_FLAG (mbr, i) == 0x80) |
| { |
| grub_printf ("The active flag(0x80) of partition %d was changed to 0.\n", (unsigned long)i); |
| } else { |
| grub_printf ("The invalid active flag(0x%X) of partition %d was changed to 0.\n", (unsigned long)(PC_SLICE_FLAG (mbr, i)), (unsigned long)i); |
| } |
| } |
| |
| PC_SLICE_FLAG (mbr, i) = 0; |
| } |
| } |
| } |
| PC_SLICE_HEAD (mbr, entry1) = start_dh; |
| PC_SLICE_SEC (mbr, entry1) = start_cl; |
| PC_SLICE_CYL (mbr, entry1) = start_ch; |
| PC_SLICE_TYPE (mbr, entry1) = new_type; |
| PC_SLICE_EHEAD (mbr, entry1) = end_dh; |
| PC_SLICE_ESEC (mbr, entry1) = end_cl; |
| PC_SLICE_ECYL (mbr, entry1) = end_ch; |
| PC_SLICE_START (mbr, entry1) = new_start; |
| PC_SLICE_LENGTH (mbr, entry1) = new_len; |
| |
| /* Make sure that the MBR has a valid signature. */ |
| PC_MBR_SIG (mbr) = PC_MBR_SIGNATURE; |
| |
| /* Write back the MBR to the disk. */ |
| buf_track = -1; |
| if (! rawwrite (current_drive, 0, mbr)) |
| return 0; |
| |
| return 1; |
| } |
| |
| static struct builtin builtin_partnew = |
| { |
| "partnew", |
| partnew_func, |
| BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_MENU | BUILTIN_HELP_LIST, |
| "partnew [--active] PART TYPE START [LEN]", |
| "Create a primary partition at the starting address START with the" |
| " length LEN, with the type TYPE. START and LEN are in sector units." |
| " If --active is used, the new partition will be active. START can be" |
| " a contiguous file that will be used as the content/data of the new" |
| " partition, in which case the LEN parameter is ignored, and TYPE can" |
| " be either 0x00 for auto or 0x10 for hidden-auto." |
| }; |
| |
| |
| /* parttype PART TYPE */ |
| static int |
| parttype_func (char *arg, int flags) |
| { |
| unsigned long long new_type = -1; |
| unsigned long part = 0xFFFFFF; |
| unsigned long start, len, offset, ext_offset1; |
| unsigned long type, entry1; |
| #if defined(STAGE1_5) || defined(GRUB_UTIL) |
| // char mbr[512]; |
| #endif |
| |
| /* Get the drive and the partition. */ |
| |
| if (! *arg || *arg == ' ' || *arg == '\t') |
| { |
| current_drive = saved_drive; |
| current_partition = saved_partition; |
| } else if (! set_device (arg)) |
| { |
| if (! safe_parse_maxint (&arg, &new_type)) |
| return 0; |
| current_drive = saved_drive; |
| current_partition = saved_partition; |
| } else { |
| /* Get the new partition type. */ |
| arg = skip_to (0, arg); |
| if (*arg && *arg != ' ' && *arg != '\t') |
| if (! safe_parse_maxint (&arg, &new_type)) |
| return 0; |
| } |
| |
| /* The drive must be a hard disk. */ |
| if (! (current_drive & 0x80)) |
| { |
| errnum = ERR_BAD_ARGUMENT; |
| return 0; |
| } |
| |
| /* The partition must be a PC slice. */ |
| if ((current_partition >> 16) == 0xFF |
| || (current_partition & 0xFFFF) != 0xFFFF) |
| { |
| errnum = ERR_BAD_ARGUMENT; |
| return 0; |
| } |
| |
| /* The partition type is unsigned char. */ |
| if (new_type != -1 && new_type > 0xFF) |
| { |
| errnum = ERR_BAD_ARGUMENT; |
| return 0; |
| } |
| |
| /* Look for the partition. */ |
| while (( next_partition_drive = current_drive, |
| next_partition_dest = 0xFFFFFF, |
| next_partition_partition = &part, |
| next_partition_type = &type, |
| next_partition_start = &start, |
| next_partition_len = &len, |
| next_partition_offset = &offset, |
| next_partition_entry = &entry1, |
| next_partition_ext_offset = &ext_offset1, |
| next_partition_buf = mbr, |
| next_partition ())) |
| { |
| if (part == current_partition) |
| { |
| /* Found. */ |
| |
| errnum = 0; |
| if (new_type == -1) /* return the current type */ |
| { |
| new_type = PC_SLICE_TYPE (mbr, entry1); |
| if (debug > 0) |
| printf ("Partition type for (hd%d,%d) is 0x%X.\n", (current_drive & 0x7F), (unsigned long)(unsigned char)(current_partition >> 16), (unsigned long)new_type); |
| return new_type; |
| } |
| |
| /* Set the type to NEW_TYPE. */ |
| PC_SLICE_TYPE (mbr, entry1) = new_type; |
| |
| /* Write back the MBR to the disk. */ |
| buf_track = -1; |
| if (! rawwrite (current_drive, offset, mbr)) |
| break; /* failure */ |
| |
| if (debug > 0) |
| printf ("Partition type for (hd%d,%d) set to 0x%X successfully.\n", (current_drive & 0x7F), (unsigned long)(unsigned char)(current_partition >> 16), (unsigned long)new_type); |
| /* Succeed. */ |
| errnum = 0; |
| return 1; |
| } |
| } |
| |
| /* The partition was not found. ERRNUM was set by next_partition. */ |
| return 0; |
| } |
| |
| static struct builtin builtin_parttype = |
| { |
| "parttype", |
| parttype_func, |
| BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_MENU | BUILTIN_HELP_LIST, |
| "parttype [PART] [TYPE]", |
| "Change the type of the partition PART to TYPE. If TYPE is omitted, return " |
| "the partition type of the specified device(instead of changing it). PART " |
| "default to the current root device." |
| }; |
| |
| |
| /* password */ |
| static int |
| password_func (char *arg, int flags) |
| { |
| int len; |
| password_t type = PASSWORD_PLAIN; |
| |
| #ifdef USE_MD5_PASSWORDS |
| if (grub_memcmp (arg, "--md5", 5) == 0) |
| { |
| type = PASSWORD_MD5; |
| arg = skip_to (0, arg); |
| } |
| #endif |
| if (grub_memcmp (arg, "--", 2) == 0) |
| { |
| type = PASSWORD_UNSUPPORTED; |
| arg = skip_to (0, arg); |
| } |
| |
| if ((flags & (BUILTIN_CMDLINE | BUILTIN_SCRIPT)) != 0) |
| { |
| /* Do password check! */ |
| char entered[32]; |
| |
| /* Wipe out any previously entered password */ |
| entered[0] = 0; |
| get_cmdline_str.prompt = "Password: "; |
| get_cmdline_str.maxlen = sizeof (entered) - 1; |
| get_cmdline_str.echo_char = '*'; |
| get_cmdline_str.readline = 0; |
| get_cmdline_str.cmdline = entered; |
| get_cmdline (get_cmdline_str); |
| |
| nul_terminate (arg); |
| if ((len = check_password (entered, arg, type)) != 0) |
| { |
| errnum = (len == 0xFFFF ? ERR_MD5_FORMAT : ERR_PRIVILEGED); |
| return 0; |
| } |
| } |
| else |
| { |
| len = grub_strlen (arg); |
| |
| /* PASSWORD NUL NUL ... */ |
| if (len + 2 > PASSWORD_BUFLEN) |
| { |
| errnum = ERR_WONT_FIT; |
| return 0; |
| } |
| |
| /* Copy the password and clear the rest of the buffer. */ |
| password = (char *) PASSWORD_BUF; |
| grub_memmove (password, arg, len); |
| grub_memset (password + len, 0, PASSWORD_BUFLEN - len); |
| password_type = type; |
| } |
| return 1; |
| } |
| |
| static struct builtin builtin_password = |
| { |
| "password", |
| password_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST | BUILTIN_NO_ECHO, |
| "password [--md5] PASSWD [FILE]", |
| "If used in the first section of a menu file, disable all" |
| " interactive editing control (menu entry editor and" |
| " command line). If the password PASSWD is entered, it loads the" |
| " FILE as a new config file and restarts the GRUB Stage 2. If you" |
| " omit the argument FILE, then GRUB just unlocks privileged" |
| " instructions. You can also use it in the script section, in" |
| " which case it will ask for the password, before continueing." |
| " The option --md5 tells GRUB that PASSWD is encrypted with" |
| " md5crypt." |
| }; |
| |
| |
| /* pause */ |
| static int |
| pause_func (char *arg, int flags) |
| { |
| char *p; |
| unsigned long long wait = -1; |
| int time1; |
| int time2 = -1; |
| |
| for (;;) |
| { |
| if (grub_memcmp (arg, "--wait=", 7) == 0) |
| { |
| p = arg + 7; |
| if (! safe_parse_maxint (&p, &wait)) |
| return 0; |
| } |
| else |
| break; |
| arg = skip_to (0, arg); |
| } |
| |
| printf("%s\n", arg); |
| |
| /* Get current time. */ |
| while ((time2 = getrtsecs ()) == 0xFF); |
| |
| for (;;) |
| { |
| /* Check if there is a key-press. */ |
| if (checkkey () != -1) |
| { |
| /* Check the special ESC key */ |
| if (ASCII_CHAR (getkey ()) == '\e') |
| return 0; /* abort this entry */ |
| else |
| return 1; /* end */ |
| } |
| |
| if (wait != -1 |
| && (time1 = getrtsecs ()) != time2 |
| && time1 != 0xFF) |
| { |
| if (wait == 0) |
| { |
| return 1; /* timed out, return as if a key is pressed */ |
| } |
| |
| time2 = time1; |
| wait--; |
| } |
| } |
| |
| return 1; |
| } |
| |
| static struct builtin builtin_pause = |
| { |
| "pause", |
| pause_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_NO_ECHO, |
| "pause [--wait=T] [MESSAGE ...]", |
| "Print MESSAGE, then wait until a key is pressed or T seconds has passed." |
| }; |
| |
| |
| #ifdef FSYS_PXE |
| /* pxe */ |
| static struct builtin builtin_pxe = |
| { |
| "pxe", |
| pxe_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST | BUILTIN_BOOTING, |
| "pxe [cmd] [parameters]", |
| "Call PXE command." |
| }; |
| #endif |
| |
| |
| #ifdef GRUB_UTIL |
| /* quit */ |
| static int |
| quit_func (char *arg, int flags) |
| { |
| stop (); |
| |
| /* Never reach here. */ |
| return 1; |
| } |
| |
| static struct builtin builtin_quit = |
| { |
| "quit", |
| quit_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST | BUILTIN_BOOTING, |
| "quit", |
| "Exit from the GRUB shell." |
| }; |
| #else |
| /* quit */ |
| static int |
| quit_func (char *arg, int flags) |
| { |
| unsigned long i; |
| register long Sum; |
| |
| /* check if we were launched from DOS. */ |
| if (*(long *)0x2A0000 != 0x50554B42) /* "BKUP" */ |
| { |
| return ! (errnum = ERR_DOS_BACKUP); |
| } |
| |
| for (i = 0, Sum = 0; i < (0xA0000 + 16) / 4; i++) |
| { |
| Sum += *(long *)(0x200000 + (i << 2)); |
| } |
| |
| if (Sum) |
| return ! (errnum = ERR_DOS_BACKUP); |
| |
| chainloader_disable_A20 = 0; |
| //grub_memmove((char *)0x110000, (char *)0x200000, 0xA0000); |
| |
| for (;;) |
| { |
| if (grub_memcmp (arg, "--disable-a20", 13) == 0) |
| { |
| chainloader_disable_A20 = 1; |
| } |
| else |
| break; |
| arg = skip_to (0, arg); |
| } |
| chain_load_segment = 0; |
| chain_load_offset = 0; |
| chain_boot_CS = *(unsigned short*)(0x2A0000 + 10); |
| chain_boot_IP = *(unsigned short*)(0x2A0000 + 8); |
| chain_load_length = 0xA0000; |
| chain_ebx = 0; |
| chain_ebx_set = 0; |
| chain_edx = 0; |
| chain_edx_set = 0; |
| chain_enable_gateA20 = ((*(short *)(0x2A0000 + 4)) != 0); |
| if (chainloader_disable_A20) |
| chain_enable_gateA20 = 0; |
| |
| /* move the code to a safe place at 0x2B0000 */ |
| grub_memmove((char *)HMA_ADDR, HMA_start, 0x200/*0xfff0*/); |
| |
| /* Turn off A20 here if the DOS image told us to do so. Note: we won't have |
| * access to the odd megas of the memory when A20 is off. |
| */ |
| if (!chain_enable_gateA20) |
| { |
| if (gateA20 (0)) |
| { |
| if (debug > 0) |
| grub_printf("\nGate A20 is turned off successfully.\n"); |
| } |
| else { |
| /* to asure A20 is on when we return to grub. */ |
| gateA20 (1); /* turn on A20 in case it is off */ |
| if (chainloader_disable_A20) |
| return ! (errnum = ERR_DISABLE_A20); |
| else |
| { |
| if (debug > 0) |
| grub_printf("\nFailed to turn off Gate A20!\n"); |
| chain_enable_gateA20 = 1; |
| } |
| } |
| } |
| |
| /* Jump to high memory area. This will move boot code at |
| * 0x110000 to the destination load-segment:load-offset; |
| * setup edx and ebx registers; switch to real mode; |
| * and jump to boot-cs:boot-ip. |
| */ |
| ((void (*)(void))HMA_ADDR)(); /* no return */ |
| |
| return 0; |
| } |
| |
| static struct builtin builtin_quit = |
| { |
| "quit", |
| quit_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST | BUILTIN_BOOTING, |
| "quit [--disable-a20]", |
| "Go back to DOS if GRUB was previously launched from DOS." |
| }; |
| #endif /* GRUB_UTIL */ |
| |
| |
| #ifdef SUPPORT_NETBOOT |
| #ifndef GRUB_UTIL |
| /* rarp */ |
| static int |
| rarp_func (char *arg, int flags) |
| { |
| if (! rarp ()) |
| { |
| if (errnum == ERR_NONE) |
| errnum = ERR_DEV_VALUES; |
| |
| return 0; |
| } |
| |
| /* Notify the configuration. */ |
| print_network_configuration (); |
| return 1; |
| } |
| |
| static struct builtin builtin_rarp = |
| { |
| "rarp", |
| rarp_func, |
| BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_MENU | BUILTIN_HELP_LIST, |
| "rarp", |
| "Initialize a network device via RARP." |
| }; |
| #endif /* ! GRUB_UTIL */ |
| #endif /* SUPPORT_NETBOOT */ |
| |
| |
| #ifndef GRUB_UTIL |
| static int |
| read_func (char *arg, int flags) |
| { |
| unsigned long long addr, val; |
| |
| if (! safe_parse_maxint (&arg, &addr)) |
| return 0; |
| |
| val = *(unsigned long *)(unsigned long)(RAW_ADDR (addr)); |
| if (debug > 0) |
| grub_printf ("Address 0x%lx: Value 0x%lx\n", addr, val); |
| return val; |
| } |
| |
| static struct builtin builtin_read = |
| { |
| "read", |
| read_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "read ADDR", |
| "Read a 32-bit value from memory at address ADDR and" |
| " display it in hex format." |
| }; |
| #endif /* ! GRUB_UTIL */ |
| |
| |
| int |
| parse_string (char *arg) |
| { |
| int len; |
| char *p; |
| char ch; |
| //int quote; |
| |
| //nul_terminate (arg); |
| #if 1 |
| for (len = 0,p = arg;(ch = *p);p++) |
| { |
| if (ch == '\\' && (ch = *++p)) |
| { |
| switch(ch) |
| { |
| case 't': |
| *arg++ = '\t'; |
| break; |
| case 'r': |
| *arg++ = '\r'; |
| break; |
| case 'n': |
| *arg++ = '\n'; |
| break; |
| case 'a': |
| *arg++ = '\a'; |
| break; |
| case 'b': |
| *arg++ = '\b'; |
| break; |
| case 'f': |
| *arg++ = '\f'; |
| break; |
| case 'v': |
| *arg++ = '\v'; |
| break; |
| case 'x': |
| { |
| /* hex */ |
| int val; |
| |
| p++; |
| ch = *p; |
| if (ch >= '0' && ch <= '9') |
| val = ch - '0'; |
| else if (ch >= 'A' && ch <= 'F') |
| val = ch - 'A' + 10; |
| else if (ch >= 'a' && ch <= 'f') |
| val = ch - 'a' + 10; |
| else |
| return len; /* error encountered */ |
| |
| p++; |
| ch = *p; |
| |
| if (ch >= '0' && ch <= '9') |
| val = (val << 4) + ch - '0'; |
| else if (ch >= 'A' && ch <= 'F') |
| val = (val << 4) + ch - 'A' + 10; |
| else if (ch >= 'a' && ch <= 'f') |
| val = (val << 4) + ch - 'a' + 10; |
| else |
| p--; |
| |
| *arg++ = val; |
| } |
| break; |
| default: |
| if (ch >= '0' && ch <= '7') |
| { |
| /* octal */ |
| int val = ch - '0'; |
| int i; |
| |
| for (i=0;i<2 && p[1] >= '0' && p[1] <= '7';i++) |
| { |
| p++; |
| val <<= 3; |
| val += *p - '0'; |
| } |
| |
| *arg++ = val; |
| break; |
| } else *arg++ = ch; |
| } |
| } else *arg++ = ch; |
| |
| len++; |
| } |
| #else |
| for (quote = len = 0, p = arg; (ch = *p); p++) |
| { |
| if (ch == '\\') |
| { |
| if (quote) |
| { |
| *arg++ = ch; |
| len++; |
| quote = 0; |
| continue; |
| } |
| quote = 1; |
| continue; |
| } |
| if (quote) |
| { |
| if (ch == 't') |
| { |
| *arg++ = '\t'; |
| len++; |
| quote = 0; |
| continue; |
| } |
| if (ch == 'r') |
| { |
| *arg++ = '\r'; |
| len++; |
| quote = 0; |
| continue; |
| } |
| if (ch == 'n') |
| { |
| *arg++ = '\n'; |
| len++; |
| quote = 0; |
| continue; |
| } |
| if (ch == 'a') |
| { |
| *arg++ = '\a'; |
| len++; |
| quote = 0; |
| continue; |
| } |
| if (ch == 'b') |
| { |
| *arg++ = '\b'; |
| len++; |
| quote = 0; |
| continue; |
| } |
| if (ch == 'f') |
| { |
| *arg++ = '\f'; |
| len++; |
| quote = 0; |
| continue; |
| } |
| if (ch == 'v') |
| { |
| *arg++ = '\v'; |
| len++; |
| quote = 0; |
| continue; |
| } |
| if (ch >= '0' && ch <= '7') |
| { |
| /* octal */ |
| int val = ch - '0'; |
| |
| if (p[1] >= '0' && p[1] <= '7') |
| { |
| val *= 8; |
| p++; |
| val += *p -'0'; |
| if (p[1] >= '0' && p[1] <= '7') |
| { |
| val *= 8; |
| p++; |
| val += *p -'0'; |
| } |
| } |
| *arg++ = val; |
| len++; |
| quote = 0; |
| continue; |
| } |
| if (ch == 'x') |
| { |
| /* hex */ |
| int val; |
| |
| p++; |
| ch = *p; |
| if (ch >= '0' && ch <= '9') |
| val = ch - '0'; |
| else if (ch >= 'A' && ch <= 'F') |
| val = ch - 'A' + 10; |
| else if (ch >= 'a' && ch <= 'f') |
| val = ch - 'a' + 10; |
| else |
| return len; /* error encountered */ |
| p++; |
| ch = *p; |
| if (ch >= '0' && ch <= '9') |
| val = val * 16 + ch - '0'; |
| else if (ch >= 'A' && ch <= 'F') |
| val = val * 16 + ch - 'A' + 10; |
| else if (ch >= 'a' && ch <= 'f') |
| val = val * 16 + ch - 'A' + 10; |
| else |
| p--; |
| *arg++ = val; |
| len++; |
| quote = 0; |
| continue; |
| } |
| if (ch) |
| { |
| *arg++ = ch; |
| len++; |
| quote = 0; |
| continue; |
| } |
| return len; |
| } |
| *arg++ = ch; |
| len++; |
| quote = 0; |
| } |
| #endif |
| // if (*arg) *arg = 0; |
| return len; |
| } |
| |
| #ifndef GRUB_UTIL |
| static int |
| write_func (char *arg, int flags) |
| { |
| unsigned long long addr; |
| unsigned long long val; |
| char *p; |
| unsigned long tmp_drive; |
| unsigned long tmp_partition; |
| unsigned long long offset; |
| unsigned long long len; |
| char tmp_file[16]; |
| //int block_file = 0; |
| |
| tmp_drive = saved_drive; |
| tmp_partition = saved_partition; |
| offset = 0; |
| for (;;) |
| { |
| if (grub_memcmp (arg, "--offset=", 9) == 0) |
| { |
| p = arg + 9; |
| if (! safe_parse_maxint (&p, &offset)) |
| return 0; |
| } |
| else |
| break; |
| arg = skip_to (0, arg); |
| } |
| |
| p = NULL; |
| addr = -1; |
| if (*arg == '/' || *arg == '(') |
| { |
| /* destination is device or file. */ |
| if (*arg == '(') |
| { |
| p = set_device (arg); |
| if (errnum) |
| goto fail; |
| if (! p) |
| { |
| if (errnum == 0) |
| errnum = ERR_BAD_ARGUMENT; |
| goto fail; |
| } |
| //if (*p != '/') |
| // block_file = 1; |
| saved_drive = current_drive; |
| saved_partition = current_partition; |
| /* if only the device portion is specified */ |
| if ((unsigned char)*p <= ' ') |
| { |
| p = tmp_file; |
| *p++ = '('; |
| *p++ = ')'; |
| *p++ = '+'; |
| *p++ = '1'; |
| *p = 0; |
| p = tmp_file; |
| grub_open (p); |
| if (errnum) |
| goto fail; |
| grub_sprintf (p + 3, "0x%lx", (unsigned long long)part_length); |
| grub_close (); |
| } |
| } |
| if (p != tmp_file) |
| p = arg; |
| grub_open (p); |
| current_drive = saved_drive; |
| current_partition = saved_partition; |
| if (errnum) |
| goto fail; |
| |
| #if 0 |
| if (current_drive != ram_drive && current_drive != 0xFFFF && block_file) |
| { |
| unsigned long j; |
| |
| /* check if it is a mapped memdrive */ |
| j = DRIVE_MAP_SIZE; /* real drive */ |
| #ifndef GRUB_UTIL |
| if (! unset_int13_handler (1)) /* map is hooked */ |
| for (j = 0; j < DRIVE_MAP_SIZE; j++) |
| { |
| if (drive_map_slot_empty (hooked_drive_map[j])) |
| { |
| j = DRIVE_MAP_SIZE; /* real drive */ |
| break; |
| } |
| |
| if (current_drive == hooked_drive_map[j].from_drive && hooked_drive_map[j].to_drive == 0xFF && !(hooked_drive_map[j].to_cylinder & 0x4000)) |
| break; /* memdrive */ |
| } |
| #endif /* ! GRUB_UTIL */ |
| |
| if (j == DRIVE_MAP_SIZE) /* real drive */ |
| { |
| /* this command is intended for running in command line and inhibited from running in menu.lst */ |
| if (flags & (BUILTIN_MENU | BUILTIN_SCRIPT)) |
| { |
| grub_close (); |
| errnum = ERR_WRITE_TO_NON_MEM_DRIVE; |
| goto fail; |
| } |
| } |
| } |
| #endif |
| |
| filepos = offset; |
| } |
| else |
| { |
| /* destination is memory address. */ |
| if (*arg < '0' || *arg > '9') |
| { |
| errnum = ERR_BAD_ARGUMENT; |
| goto fail; |
| } |
| if (! safe_parse_maxint (&arg, &addr)) |
| goto fail; |
| if (addr == -1) |
| { |
| errnum = ERR_BAD_ARGUMENT; |
| goto fail; |
| } |
| } |
| |
| /* destination is device or file if addr == -1 */ |
| /* destination is memory address if addr != -1 */ |
| |
| arg = skip_to (0, arg); /* INTEGER_OR_STRING */ |
| |
| if (addr == -1) |
| { |
| /* string */ |
| if (! *arg) |
| { |
| grub_close (); |
| errnum = ERR_BAD_ARGUMENT; |
| goto fail; |
| } |
| len = parse_string (arg); |
| if (saved_drive == 0xFFFF && p == tmp_file) /* (md) */ |
| { |
| grub_close (); |
| grub_memmove64 (offset, (unsigned long long)(unsigned int)arg, len); |
| if ((unsigned long)&saved_drive + 3 >= offset && (unsigned long)&saved_drive < offset + len) |
| tmp_drive = saved_drive; |
| if ((unsigned long)&saved_partition + 3 >= offset && (unsigned long)&saved_partition < offset + len) |
| tmp_partition = saved_partition; |
| errnum = 0; |
| goto succ; |
| } |
| /* write file */ |
| if (len > filemax - filepos) |
| len = filemax - filepos; |
| if (grub_read ((unsigned long long)(unsigned int)arg, len, 0x900ddeed) != len) /* write */ |
| { |
| if (errnum == 0) |
| errnum = ERR_WRITE; |
| } |
| { |
| int err = errnum; |
| grub_close (); |
| errnum = err; |
| } |
| succ: |
| if (errnum == 0 && debug > 0) |
| grub_printf ("0x%lX bytes written at offset 0x%lX.\n", (unsigned long long)len, (unsigned long long)offset); |
| } |
| else |
| { |
| /* integer */ |
| p = arg; |
| if (! safe_parse_maxint (&p, &val)) |
| goto fail; |
| *((unsigned *)(unsigned int) RAW_ADDR (addr += offset)) = (unsigned)val; |
| if (debug > 0) |
| grub_printf ("Address 0x%lx: Value 0x%x\n", (unsigned long long)addr, (*((unsigned *)(unsigned int) RAW_ADDR (addr)))); |
| if (addr != (int)&saved_drive) |
| saved_drive = tmp_drive; |
| if (addr != (int)&saved_partition) |
| saved_partition = tmp_partition; |
| errnum = 0; |
| return val; |
| } |
| |
| fail: |
| |
| saved_drive = tmp_drive; |
| saved_partition = tmp_partition; |
| return !(errnum); |
| } |
| |
| static struct builtin builtin_write = |
| { |
| "write", |
| write_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "write [--offset=SKIP] ADDR_OR_FILE INTEGER_OR_STRING", |
| "Write a 32-bit value to memory or write a string to file(or device!)." |
| }; |
| |
| |
| /* reboot */ |
| static int |
| reboot_func (char *arg, int flags) |
| { |
| grub_reboot (); |
| |
| /* Never reach here. */ |
| return 0; |
| } |
| |
| static struct builtin builtin_reboot = |
| { |
| "reboot", |
| reboot_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST | BUILTIN_BOOTING, |
| "reboot", |
| "Reboot your system." |
| }; |
| #endif /* ! GRUB_UTIL */ |
| |
| |
| /* Print the root device information. */ |
| static void |
| print_root_device (void) |
| { |
| if (saved_drive == NETWORK_DRIVE) |
| { |
| /* Network drive. */ |
| grub_printf (" (nd):"); |
| } |
| else |
| { |
| if (saved_drive & 0x80) |
| { |
| /* Hard disk drive. */ |
| grub_printf (" (hd%d", (saved_drive - 0x80)); |
| } |
| else |
| { |
| /* Floppy disk drive. */ |
| grub_printf (" (fd%d", saved_drive); |
| } |
| |
| if ((saved_partition & 0xFF0000) != 0xFF0000) |
| grub_printf (",%d", (unsigned long)(unsigned char)(saved_partition >> 16)); |
| |
| if ((saved_partition & 0x00FF00) != 0x00FF00) |
| grub_printf (",%c", (unsigned long)(unsigned char)((saved_partition >> 8) + 'a')); |
| |
| grub_printf ("):"); |
| } |
| } |
| |
| static int |
| real_root_func (char *arg, int attempt_mnt) |
| { |
| char *next; |
| unsigned long i, tmp_drive = 0; |
| unsigned long tmp_partition = 0; |
| char ch; |
| |
| /* Get the drive and the partition. */ |
| if (! *arg || *arg == ' ' || *arg == '\t') |
| { |
| current_drive = saved_drive; |
| current_partition = saved_partition; |
| next = 0; /* If ARG is empty, just print the current root device. */ |
| } |
| else if (grub_memcmp (arg, "endpart", 7) == 0) |
| { |
| unsigned long part = 0xFFFFFF; |
| unsigned long start, len, offset, ext_offset1; |
| unsigned long type, entry1; |
| |
| /* find MAX/END partition of the current root drive */ |
| |
| if (! (saved_drive & 0x80)) |
| { |
| grub_printf ("Cannot use 'endpart' with the current root device (fd%d).\n", saved_drive); |
| errnum = ERR_DEV_VALUES; |
| return 0; |
| } |
| |
| tmp_partition = saved_partition; |
| tmp_drive = saved_drive; |
| |
| current_partition = saved_partition; |
| current_drive = saved_drive; |
| next = arg + 7; |
| |
| while ((next_partition_drive = current_drive, |
| next_partition_dest = 0xFFFFFF, |
| next_partition_partition = &part, |
| next_partition_type = &type, |
| next_partition_start = &start, |
| next_partition_len = &len, |
| next_partition_offset = &offset, |
| next_partition_entry = &entry1, |
| next_partition_ext_offset = &ext_offset1, |
| next_partition_buf = mbr, |
| next_partition ())) |
| { |
| if (type != PC_SLICE_TYPE_NONE |
| && ! IS_PC_SLICE_TYPE_BSD (type) |
| && ! IS_PC_SLICE_TYPE_EXTENDED (type)) |
| { |
| saved_partition = current_partition; |
| current_partition = part; |
| if (attempt_mnt) |
| { |
| if (! open_device ()) |
| current_partition = saved_partition; |
| } |
| } |
| |
| /* We want to ignore any error here. */ |
| errnum = ERR_NONE; |
| } |
| |
| saved_drive = tmp_drive; |
| saved_partition = tmp_partition; |
| errnum = ERR_NONE; |
| |
| } |
| else if (grub_memcmp (arg, "bootdev", 7) == 0) |
| { |
| /* use original boot device */ |
| current_partition = install_partition; |
| current_drive = boot_drive; |
| next = arg + 7; |
| } |
| else |
| { |
| /* Call set_device to get the drive and the partition in ARG. */ |
| if (! (next = set_device (arg))) |
| return 0; |
| } |
| |
| if (next) |
| { |
| /* check the length of the root prefix, i.e., NEXT */ |
| for (i = 0; i < sizeof (saved_dir); i++) |
| { |
| ch = next[i]; |
| if (ch == 0 || ch == 0x20 || ch == '\t') |
| break; |
| if (ch == '\\') |
| { |
| //saved_dir[i] = ch; |
| i++; |
| ch = next[i]; |
| if (! ch || i >= sizeof (saved_dir)) |
| { |
| i--; |
| //saved_dir[i] = 0; |
| break; |
| } |
| } |
| } |
| |
| if (i >= sizeof (saved_dir)) |
| { |
| errnum = ERR_WONT_FIT; |
| return 0; |
| } |
| |
| tmp_partition = current_partition; |
| tmp_drive = current_drive; |
| } |
| |
| errnum = ERR_NONE; |
| |
| /* Ignore ERR_FSYS_MOUNT. */ |
| if (attempt_mnt) |
| { |
| if (! open_device () && errnum != ERR_FSYS_MOUNT) |
| return 0; |
| |
| #if 1 |
| if (next) |
| { |
| unsigned long long hdbias = 0; |
| char *biasptr; |
| |
| /* BSD and chainloading evil hacks !! */ |
| biasptr = skip_to (0, next); |
| safe_parse_maxint (&biasptr, &hdbias); |
| errnum = 0; |
| bootdev = set_bootdev (hdbias); |
| } |
| if (errnum) |
| return 0; |
| #endif |
| |
| if (fsys_type != NUM_FSYS || ! next) |
| /* Print the type of the filesystem. */ |
| { |
| if (debug > 0) |
| { |
| if (! next) |
| print_root_device (); |
| print_fsys_type (); |
| } |
| } |
| else |
| return ! (errnum = ERR_FSYS_MOUNT); |
| } |
| #if 1 |
| else if (next) |
| { |
| /* This is necessary, because the location of a partition table |
| must be set appropriately. */ |
| if (open_partition ()) |
| { |
| set_bootdev (0); |
| if (errnum) |
| return 0; |
| } |
| } |
| #endif |
| |
| if (next) |
| { |
| if (kernel_type == KERNEL_TYPE_CHAINLOADER) |
| { |
| if (is_io) |
| { |
| /* DL=drive, DH=media descriptor: 0xF0=floppy, 0xF8=harddrive */ |
| chainloader_edx = (tmp_drive & 0xFF) | 0xF000 | ((tmp_drive & 0x80) << 4); |
| chainloader_edx_set = 1; |
| |
| /* the user might wrongly set these argument, so force them to be correct */ |
| |
| chainloader_ebx = 0; // clear BX for WinME |
| chainloader_ebx_set = 1; |
| chainloader_load_segment = 0x0070; |
| chainloader_load_offset = 0; |
| chainloader_skip_length = 0x0800; |
| } else { |
| if (chainloader_edx_set) |
| { |
| chainloader_edx &= 0xFFFF0000; |
| chainloader_edx |= tmp_drive | ((tmp_partition >> 8) & 0xFF00); |
| } |
| |
| if (chainloader_ebx_set && chainloader_ebx) |
| { |
| chainloader_ebx &= 0xFFFF0000; |
| chainloader_ebx |= tmp_drive | ((tmp_partition >> 8) & 0xFF00); |
| } |
| } |
| } |
| |
| saved_partition = tmp_partition; |
| saved_drive = tmp_drive; |
| |
| /* copy root prefix to saved_dir */ |
| for (i = 0; i < sizeof (saved_dir); i++) |
| { |
| ch = next[i]; |
| if (ch == 0 || ch == 0x20 || ch == '\t') |
| break; |
| if (ch == '\\') |
| { |
| saved_dir[i] = ch; |
| i++; |
| ch = next[i]; |
| if (! ch || i >= sizeof (saved_dir)) |
| { |
| i--; |
| saved_dir[i] = 0; |
| break; |
| } |
| } |
| saved_dir[i] = ch; |
| } |
| |
| if (saved_dir[i-1] == '/') |
| { |
| saved_dir[i-1] = 0; |
| } else |
| saved_dir[i] = 0; |
| } |
| |
| if (debug > 0 && *saved_dir) |
| grub_printf ("The current working directory(i.e., the relative path) is %s\n", saved_dir); |
| |
| /* Clear ERRNUM. */ |
| errnum = 0; |
| /* If ARG is empty, then return TRUE for harddrive, and FALSE for floppy */ |
| return next ? 1 : (saved_drive & 0x80); |
| } |
| |
| static int |
| root_func (char *arg, int flags) |
| { |
| return real_root_func (arg, 1); |
| } |
| |
| static struct builtin builtin_root = |
| { |
| "root", |
| root_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "root [DEVICE [HDBIAS]]", |
| "Set the current \"root device\" to the device DEVICE, then" |
| " attempt to mount it to get the partition size (for passing the" |
| " partition descriptor in `ES:ESI', used by some chain-loaded" |
| " bootloaders), the BSD drive-type (for booting BSD kernels using" |
| " their native boot format), and correctly determine " |
| " the PC partition where a BSD sub-partition is located. The" |
| " optional HDBIAS parameter is a number to tell a BSD kernel" |
| " how many BIOS drive numbers are on controllers before the current" |
| " one. For example, if there is an IDE disk and a SCSI disk, and your" |
| " FreeBSD root partition is on the SCSI disk, then use a `1' for HDBIAS." |
| }; |
| |
| |
| /* rootnoverify */ |
| static int |
| rootnoverify_func (char *arg, int flags) |
| { |
| return real_root_func (arg, 0); |
| } |
| |
| static struct builtin builtin_rootnoverify = |
| { |
| "rootnoverify", |
| rootnoverify_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "rootnoverify [DEVICE [HDBIAS]]", |
| "Similar to `root', but don't attempt to mount the partition. This" |
| " is useful for when an OS is outside of the area of the disk that" |
| " GRUB can read, but setting the correct root device is still" |
| " desired. Note that the items mentioned in `root' which" |
| " derived from attempting the mount will NOT work correctly." |
| }; |
| |
| |
| static int time1; |
| static int time2; |
| |
| #if !defined(SUPPORT_DISKLESS) && !defined(GRUB_UTIL) |
| static unsigned long saved_sectors[2]; |
| static unsigned long saved_offsets[2]; |
| static unsigned long saved_lengths[2]; |
| static unsigned long long wait; |
| static unsigned long long entryno; |
| static char *default_file; |
| static int c; |
| static int deny_write; |
| |
| /* Save sector information about at most two sectors. */ |
| static void disk_read_savesect_func1 (unsigned long sector, unsigned long offset, unsigned long length); |
| static void |
| disk_read_savesect_func1 (unsigned long sector, unsigned long offset, unsigned long length) |
| { |
| if (blklst_num_sectors < 2) |
| { |
| saved_sectors[blklst_num_sectors] = sector; |
| saved_offsets[blklst_num_sectors] = offset; |
| saved_lengths[blklst_num_sectors] = length; |
| } |
| blklst_num_sectors++; |
| } |
| |
| static void prompt_user (void); |
| |
| static void |
| prompt_user (void) |
| { |
| int wait1; |
| |
| wait1 = wait; |
| |
| printf("\nAbout to write the entry number %d to file %s\n\n" |
| "Press Y to allow or N to deny.\n", entryno, default_file); |
| |
| /* Get current time. */ |
| while ((time1 = getrtsecs ()) == 0xFF); |
| |
| for (;;) |
| { |
| /* Check if ESC is pressed. */ |
| if (checkkey () != -1 /*&& ASCII_CHAR (getkey ()) == '\e'*/) |
| { |
| if ((c = ASCII_CHAR (getkey ())) == '\e') |
| { |
| deny_write = 2; /* abort this entry */ |
| break; |
| } |
| if (c == 'Y' || c == 'y') |
| { |
| deny_write = -1; |
| break; /* allow the write */ |
| } |
| if (c == 'N' || c == 'n') |
| { |
| deny_write = 1; |
| break; /* deny the write */ |
| } |
| |
| /* any other key restore the wait */ |
| wait1 = wait; |
| } |
| |
| if (wait1 != -1 |
| && (time1 = getrtsecs ()) != time2 |
| && time1 != 0xFF) |
| { |
| if (wait1 == 0) |
| { |
| deny_write = 1; |
| break; /* timed out, deny the write */ |
| } |
| |
| time2 = time1; |
| wait1--; |
| } |
| } |
| |
| } |
| |
| #endif /* ! SUPPORT_DISKLESS && ! GRUB_UTIL */ |
| |
| /* savedefault */ |
| static int |
| savedefault_func (char *arg, int flags) |
| { |
| #if !defined(SUPPORT_DISKLESS) && !defined(GRUB_UTIL) |
| unsigned long tmp_drive = saved_drive; |
| unsigned long tmp_partition = saved_partition; |
| |
| char *p; |
| // int ignore_error = 0; |
| |
| blklst_num_sectors = 0; |
| wait = 0; |
| default_file = (char *) DEFAULT_FILE_BUF; |
| time2 = -1; |
| deny_write = 0; |
| |
| /* This command is only useful when you boot an entry from the menu |
| interface. */ |
| // if (! (flags & BUILTIN_SCRIPT)) |
| // { |
| // errnum = ERR_UNRECOGNIZED; |
| // return 0; |
| // } |
| |
| for (;;) |
| { |
| /*if (grub_memcmp (arg, "--ignore-error", 14) == 0) |
| { |
| ignore_error = 1; |
| } |
| else*/ if (grub_memcmp (arg, "--wait=", 7) == 0) |
| { |
| p = arg + 7; |
| if (! safe_parse_maxint (&p, &wait)) |
| return 0; |
| } |
| else |
| break; |
| arg = skip_to (0, arg); |
| } |
| |
| /* Determine a saved entry number. */ |
| if (*arg) |
| { |
| if (grub_memcmp (arg, "fallback", sizeof ("fallback") - 1) == 0) |
| { |
| int i; |
| int index = 0; |
| |
| for (i = 0; i < MAX_FALLBACK_ENTRIES; i++) |
| { |
| if (fallback_entries[i] < 0) |
| break; |
| if (fallback_entries[i] == current_entryno) |
| { |
| index = i + 1; |
| break; |
| } |
| } |
| |
| if (index >= MAX_FALLBACK_ENTRIES || fallback_entries[index] < 0) |
| { |
| /* This is the last. */ |
| errnum = ERR_BAD_ARGUMENT; |
| return 0; |
| } |
| |
| entryno = fallback_entries[index]; |
| } |
| else if (! safe_parse_maxint (&arg, &entryno)) |
| return 0; |
| } |
| else |
| entryno = current_entryno; |
| |
| /* Open the default file. */ |
| saved_drive = boot_drive; |
| saved_partition = install_partition; |
| if (grub_open (default_file)) |
| { |
| unsigned long len, len1; |
| char buf[12]; |
| #ifdef STAGE1_5 |
| char mbr[512]; |
| #endif |
| |
| if (compressed_file) |
| { |
| errnum = ERR_DEFAULT_FILE; |
| goto fail; |
| } |
| |
| saved_lengths[0] = 0; |
| disk_read_hook = disk_read_savesect_func1; |
| len = grub_read ((unsigned long long)(unsigned int)mbr, 512, 0xedde0d90); |
| disk_read_hook = 0; |
| grub_close (); |
| |
| if (len != ((filemax <= 512) ? filemax : 512)) |
| { |
| /* Read file failure */ |
| errnum = ERR_READ; |
| goto fail; |
| } |
| |
| if (len < 180 || filemax > 2048) |
| { |
| /* This is too small or too large. Do not modify the file manually! */ |
| errnum = ERR_DEFAULT_FILE; |
| goto fail; |
| } |
| |
| /* check file content for safety */ |
| p = mbr; |
| while (p < mbr + len - 100 && |
| grub_memcmp (++p, warning_defaultfile, 73)); |
| |
| if (p > mbr + len - 160) |
| { |
| errnum = ERR_DEFAULT_FILE; |
| goto fail; |
| } |
| |
| if (blklst_num_sectors > 2 || blklst_num_sectors <= 0 || saved_lengths[0] <= 0 || saved_lengths[0] > SECTOR_SIZE) |
| { |
| /* Is this possible?! Too fragmented! */ |
| errnum = ERR_FSYS_CORRUPT; |
| goto fail; |
| } |
| |
| /* Set up a string to be written. */ |
| //grub_memset (mbr, '\n', 11); |
| len = grub_sprintf (buf, "%d", entryno); |
| len++; /* including the ending null. */ |
| |
| // if (saved_lengths[0] < len) |
| // { |
| //char sect[512]; |
| if (! rawread (current_drive, saved_sectors[0], 0, SECTOR_SIZE, (unsigned long long)(unsigned int)mbr, 0xedde0d90)) |
| goto fail; |
| |
| len1 = saved_lengths[0] < len ? saved_lengths[0] : len; |
| |
| /* it is not good to write a sector frequently, so check if we |
| * can skip the write. */ |
| |
| if (grub_memcmp (mbr + saved_offsets[0], buf, len1)) |
| { |
| grub_memmove (mbr + saved_offsets[0], buf, len1); |
| |
| /* confirm the write */ |
| if (wait && deny_write == 0) |
| prompt_user(); |
| |
| if (deny_write == 2) |
| return 0; |
| |
| if (deny_write <= 0 ) |
| { |
| if (! rawwrite (current_drive, saved_sectors[0], mbr)) |
| goto fail; |
| } |
| } |
| |
| /* The file is anchored to another file and the first few bytes |
| are spanned in two sectors. Uggh... */ |
| |
| //len = strlen(buf) + 1; /* entryno and the ending NULL */ |
| |
| /* only LEN bytes need to be written */ |
| if (saved_lengths[0] < len) |
| { |
| /* write the rest bytes to the second sector */ |
| if (! rawread (current_drive, saved_sectors[1], 0, 512, (unsigned long long)(unsigned int)mbr, 0xedde0d90)) |
| goto fail; |
| |
| /* skip the write if possible. */ |
| if (grub_memcmp (mbr + saved_offsets[1], |
| buf + saved_lengths[0], |
| len - saved_lengths[0])) |
| { |
| grub_memmove (mbr + saved_offsets[1], |
| buf + saved_lengths[0], |
| len - saved_lengths[0]); |
| |
| if (wait && deny_write == 0) |
| prompt_user(); |
| |
| if (deny_write == 2) |
| return 0; |
| |
| if (deny_write <= 0 ) |
| { |
| if (! rawwrite (current_drive, saved_sectors[1], mbr)) |
| goto fail; |
| } |
| } |
| } |
| // } |
| // else |
| // { |
| // /* This is a simple case. It fits into a single sector. */ |
| // if (! rawread (current_drive, saved_sectors[0], 0, SECTOR_SIZE, |
| // sect)) |
| // goto fail; |
| // grub_memmove (sect + saved_offsets[0], buf, len); |
| // if (! rawwrite (current_drive, saved_sectors[0], sect)) |
| // goto fail; |
| // } |
| |
| /* Clear the cache. */ |
| buf_track = -1; |
| } |
| |
| fail: |
| saved_drive = tmp_drive; |
| saved_partition = tmp_partition; |
| |
| if (errnum) |
| { |
| if (debug > 0) |
| grub_printf ("\nError occurred while savedefault.\n"); |
| /* ignore all errors, but return false. */ |
| return (errnum = 0); |
| } |
| |
| return ! errnum; |
| #else /* ! SUPPORT_DISKLESS && ! GRUB_UTIL */ |
| errnum = ERR_UNRECOGNIZED; |
| return 0; |
| #endif /* ! SUPPORT_DISKLESS && ! GRUB_UTIL */ |
| } |
| |
| static struct builtin builtin_savedefault = |
| { |
| "savedefault", |
| savedefault_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "savedefault [--wait=T] [NUM | `fallback']", |
| "Save the current entry as the default boot entry if no argument is" |
| " specified. If a number is specified, this number is saved. If" |
| " `fallback' is used, next fallback entry is saved." |
| " If T is not 0, prompt the user to confirm the write operation by" |
| " pressing the Y key, and if no key-press detected within T seconds," |
| " the write will be discarded." |
| }; |
| |
| |
| #ifdef SUPPORT_SERIAL |
| /* serial */ |
| static int |
| serial_func (char *arg, int flags) |
| { |
| unsigned short port = serial_hw_get_port (0); |
| unsigned int speed = 9600; |
| int word_len = UART_8BITS_WORD; |
| int parity = UART_NO_PARITY; |
| int stop_bit_len = UART_1_STOP_BIT; |
| |
| /* Process GNU-style long options. |
| FIXME: We should implement a getopt-like function, to avoid |
| duplications. */ |
| while (1) |
| { |
| if (grub_memcmp (arg, "--unit=", sizeof ("--unit=") - 1) == 0) |
| { |
| char *p = arg + sizeof ("--unit=") - 1; |
| unsigned long long unit; |
| |
| if (! safe_parse_maxint (&p, &unit)) |
| return 0; |
| |
| if (unit < 0 || unit > 3) |
| { |
| errnum = ERR_DEV_VALUES; |
| return 0; |
| } |
| |
| port = serial_hw_get_port (unit); |
| } |
| else if (grub_memcmp (arg, "--speed=", sizeof ("--speed=") - 1) == 0) |
| { |
| char *p = arg + sizeof ("--speed=") - 1; |
| unsigned long long num; |
| |
| if (! safe_parse_maxint (&p, &num)) |
| return 0; |
| |
| speed = (unsigned int) num; |
| } |
| else if (grub_memcmp (arg, "--port=", sizeof ("--port=") - 1) == 0) |
| { |
| char *p = arg + sizeof ("--port=") - 1; |
| unsigned long long num; |
| |
| if (! safe_parse_maxint (&p, &num)) |
| return 0; |
| |
| port = (unsigned short) num; |
| } |
| else if (grub_memcmp (arg, "--word=", sizeof ("--word=") - 1) == 0) |
| { |
| char *p = arg + sizeof ("--word=") - 1; |
| unsigned long long len; |
| |
| if (! safe_parse_maxint (&p, &len)) |
| return 0; |
| |
| switch (len) |
| { |
| case 5: word_len = UART_5BITS_WORD; break; |
| case 6: word_len = UART_6BITS_WORD; break; |
| case 7: word_len = UART_7BITS_WORD; break; |
| case 8: word_len = UART_8BITS_WORD; break; |
| default: |
| errnum = ERR_BAD_ARGUMENT; |
| return 0; |
| } |
| } |
| else if (grub_memcmp (arg, "--stop=", sizeof ("--stop=") - 1) == 0) |
| { |
| char *p = arg + sizeof ("--stop=") - 1; |
| unsigned long long len; |
| |
| if (! safe_parse_maxint (&p, &len)) |
| return 0; |
| |
| switch (len) |
| { |
| case 1: stop_bit_len = UART_1_STOP_BIT; break; |
| case 2: stop_bit_len = UART_2_STOP_BITS; break; |
| default: |
| errnum = ERR_BAD_ARGUMENT; |
| return 0; |
| } |
| } |
| else if (grub_memcmp (arg, "--parity=", sizeof ("--parity=") - 1) == 0) |
| { |
| char *p = arg + sizeof ("--parity=") - 1; |
| |
| if (grub_memcmp (p, "no", sizeof ("no") - 1) == 0) |
| parity = UART_NO_PARITY; |
| else if (grub_memcmp (p, "odd", sizeof ("odd") - 1) == 0) |
| parity = UART_ODD_PARITY; |
| else if (grub_memcmp (p, "even", sizeof ("even") - 1) == 0) |
| parity = UART_EVEN_PARITY; |
| else |
| { |
| errnum = ERR_BAD_ARGUMENT; |
| return 0; |
| } |
| } |
| # ifdef GRUB_UTIL |
| /* In the grub shell, don't use any port number but open a tty |
| device instead. */ |
| else if (grub_memcmp (arg, "--device=", sizeof ("--device=") - 1) == 0) |
| { |
| char *p = arg + sizeof ("--device=") - 1; |
| char dev[256]; /* XXX */ |
| char *q = dev; |
| |
| while (*p && ! grub_isspace (*p)) |
| *q++ = *p++; |
| |
| *q = 0; |
| serial_set_device (dev); |
| } |
| # endif /* GRUB_UTIL */ |
| else |
| break; |
| |
| arg = skip_to (0, arg); |
| } |
| |
| /* Initialize the serial unit. */ |
| if (! serial_hw_init (port, speed, word_len, parity, stop_bit_len)) |
| { |
| errnum = ERR_BAD_ARGUMENT; |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| static struct builtin builtin_serial = |
| { |
| "serial", |
| serial_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "serial [--unit=UNIT] [--port=PORT] [--speed=SPEED] [--word=WORD]\n [--parity=PARITY] [--stop=STOP] [--device=DEV]", |
| "Initialize a serial device. UNIT is a digit that specifies which serial" |
| " device is used (e.g. 0 == COM1). If you need to specify the port number," |
| " set it by --port. SPEED is the DTE-DTE speed. WORD is the word length," |
| " PARITY is the type of parity, which is one of `no', `odd' and `even'." |
| " STOP is the length of stop bit(s). The option --device can be used only" |
| " in the grub shell, which specifies the file name of a tty device. The" |
| " default values are COM1, 9600, 8N1." |
| }; |
| #endif /* SUPPORT_SERIAL */ |
| |
| |
| /* setkey */ |
| struct keysym |
| { |
| char *unshifted_name; /* the name in unshifted state */ |
| char *shifted_name; /* the name in shifted state */ |
| unsigned char unshifted_ascii; /* the ascii code in unshifted state */ |
| unsigned char shifted_ascii; /* the ascii code in shifted state */ |
| unsigned char keycode; /* keyboard scancode */ |
| }; |
| |
| /* The table for key symbols. If the "shifted" member of an entry is |
| NULL, the entry does not have shifted state. */ |
| static struct keysym keysym_table[] = |
| { |
| {"escape", 0, 0x1b, 0, 0x01}, |
| {"1", "exclam", '1', '!', 0x02}, |
| {"2", "at", '2', '@', 0x03}, |
| {"3", "numbersign", '3', '#', 0x04}, |
| {"4", "dollar", '4', '$', 0x05}, |
| {"5", "percent", '5', '%', 0x06}, |
| {"6", "caret", '6', '^', 0x07}, |
| {"7", "ampersand", '7', '&', 0x08}, |
| {"8", "asterisk", '8', '*', 0x09}, |
| {"9", "parenleft", '9', '(', 0x0a}, |
| {"0", "parenright", '0', ')', 0x0b}, |
| {"minus", "underscore", '-', '_', 0x0c}, |
| {"equal", "plus", '=', '+', 0x0d}, |
| {"backspace", 0, '\b', 0, 0x0e}, |
| {"tab", 0, '\t', 0, 0x0f}, |
| {"q", "Q", 'q', 'Q', 0x10}, |
| {"w", "W", 'w', 'W', 0x11}, |
| {"e", "E", 'e', 'E', 0x12}, |
| {"r", "R", 'r', 'R', 0x13}, |
| {"t", "T", 't', 'T', 0x14}, |
| {"y", "Y", 'y', 'Y', 0x15}, |
| {"u", "U", 'u', 'U', 0x16}, |
| {"i", "I", 'i', 'I', 0x17}, |
| {"o", "O", 'o', 'O', 0x18}, |
| {"p", "P", 'p', 'P', 0x19}, |
| {"bracketleft", "braceleft", '[', '{', 0x1a}, |
| {"bracketright", "braceright", ']', '}', 0x1b}, |
| {"enter", 0, '\n', 0, 0x1c}, |
| {"control", 0, 0, 0, 0x1d}, |
| {"a", "A", 'a', 'A', 0x1e}, |
| {"s", "S", 's', 'S', 0x1f}, |
| {"d", "D", 'd', 'D', 0x20}, |
| {"f", "F", 'f', 'F', 0x21}, |
| {"g", "G", 'g', 'G', 0x22}, |
| {"h", "H", 'h', 'H', 0x23}, |
| {"j", "J", 'j', 'J', 0x24}, |
| {"k", "K", 'k', 'K', 0x25}, |
| {"l", "L", 'l', 'L', 0x26}, |
| {"semicolon", "colon", ';', ':', 0x27}, |
| {"quote", "doublequote", '\'', '"', 0x28}, |
| {"backquote", "tilde", '`', '~', 0x29}, |
| {"shift", 0, 0, 0, 0x2a}, |
| {"backslash", "bar", '\\', '|', 0x2b}, |
| {"z", "Z", 'z', 'Z', 0x2c}, |
| {"x", "X", 'x', 'X', 0x2d}, |
| {"c", "C", 'c', 'C', 0x2e}, |
| {"v", "V", 'v', 'V', 0x2f}, |
| {"b", "B", 'b', 'B', 0x30}, |
| {"n", "N", 'n', 'N', 0x31}, |
| {"m", "M", 'm', 'M', 0x32}, |
| {"comma", "less", ',', '<', 0x33}, |
| {"period", "greater", '.', '>', 0x34}, |
| {"slash", "question", '/', '?', 0x35}, |
| {"alt", 0, 0, 0, 0x38}, |
| {"space", 0, ' ', 0, 0x39}, |
| {"capslock", 0, 0, 0, 0x3a}, |
| {"F1", 0, 0, 0, 0x3b}, |
| {"F2", 0, 0, 0, 0x3c}, |
| {"F3", 0, 0, 0, 0x3d}, |
| {"F4", 0, 0, 0, 0x3e}, |
| {"F5", 0, 0, 0, 0x3f}, |
| {"F6", 0, 0, 0, 0x40}, |
| {"F7", 0, 0, 0, 0x41}, |
| {"F8", 0, 0, 0, 0x42}, |
| {"F9", 0, 0, 0, 0x43}, |
| {"F10", 0, 0, 0, 0x44}, |
| /* Caution: do not add NumLock here! we cannot deal with it properly. */ |
| {"delete", 0, 0x7f, 0, 0x53} |
| }; |
| |
| static int find_key_code (char *key); |
| static int find_ascii_code (char *key); |
| |
| static int |
| find_key_code (char *key) |
| { |
| int i; |
| |
| for (i = 0; i < sizeof (keysym_table) / sizeof (keysym_table[0]); i++) |
| { |
| if (keysym_table[i].unshifted_name && |
| grub_strcmp (key, keysym_table[i].unshifted_name) == 0) |
| return keysym_table[i].keycode; |
| else if (keysym_table[i].shifted_name && |
| grub_strcmp (key, keysym_table[i].shifted_name) == 0) |
| return keysym_table[i].keycode; |
| } |
| |
| return 0; |
| } |
| |
| static int |
| find_ascii_code (char *key) |
| { |
| int i; |
| |
| for (i = 0; i < sizeof (keysym_table) / sizeof (keysym_table[0]); i++) |
| { |
| if (keysym_table[i].unshifted_name && |
| grub_strcmp (key, keysym_table[i].unshifted_name) == 0) |
| return keysym_table[i].unshifted_ascii; |
| else if (keysym_table[i].shifted_name && |
| grub_strcmp (key, keysym_table[i].shifted_name) == 0) |
| return keysym_table[i].shifted_ascii; |
| } |
| |
| return 0; |
| } |
| |
| static int |
| setkey_func (char *arg, int flags) |
| { |
| char *to_key, *from_key; |
| int to_code, from_code; |
| int map_in_interrupt = 0; |
| |
| to_key = arg; |
| from_key = skip_to (0, to_key); |
| |
| if (! *to_key) |
| { |
| /* If the user specifies no argument, reset the key mappings. */ |
| grub_memset (bios_key_map, 0, KEY_MAP_SIZE * sizeof (unsigned short)); |
| grub_memset (ascii_key_map, 0, KEY_MAP_SIZE * sizeof (unsigned short)); |
| |
| return 1; |
| } |
| else if (! *from_key) |
| { |
| /* The user must specify two arguments or zero argument. */ |
| errnum = ERR_BAD_ARGUMENT; |
| return 0; |
| } |
| |
| nul_terminate (to_key); |
| nul_terminate (from_key); |
| |
| to_code = find_ascii_code (to_key); |
| from_code = find_ascii_code (from_key); |
| if (! to_code || ! from_code) |
| { |
| map_in_interrupt = 1; |
| to_code = find_key_code (to_key); |
| from_code = find_key_code (from_key); |
| if (! to_code || ! from_code) |
| { |
| errnum = ERR_BAD_ARGUMENT; |
| return 0; |
| } |
| } |
| |
| if (map_in_interrupt) |
| { |
| int i; |
| |
| /* Find an empty slot. */ |
| for (i = 0; i < KEY_MAP_SIZE; i++) |
| { |
| if ((bios_key_map[i] & 0xff) == from_code) |
| /* Perhaps the user wants to overwrite the map. */ |
| break; |
| |
| if (! bios_key_map[i]) |
| break; |
| } |
| |
| if (i == KEY_MAP_SIZE) |
| { |
| errnum = ERR_WONT_FIT; |
| return 0; |
| } |
| |
| if (to_code == from_code) |
| /* If TO is equal to FROM, delete the entry. */ |
| grub_memmove ((char *) &bios_key_map[i], |
| (char *) &bios_key_map[i + 1], |
| sizeof (unsigned short) * (KEY_MAP_SIZE - i)); |
| else |
| bios_key_map[i] = (to_code << 8) | from_code; |
| |
| #ifndef GRUB_UTIL |
| /* Ugly but should work. */ |
| unset_int15_handler (); |
| set_int15_handler (); |
| #endif |
| } |
| else |
| { |
| int i; |
| |
| /* Find an empty slot. */ |
| for (i = 0; i < KEY_MAP_SIZE; i++) |
| { |
| if ((ascii_key_map[i] & 0xff) == from_code) |
| /* Perhaps the user wants to overwrite the map. */ |
| break; |
| |
| if (! ascii_key_map[i]) |
| break; |
| } |
| |
| if (i == KEY_MAP_SIZE) |
| { |
| errnum = ERR_WONT_FIT; |
| return 0; |
| } |
| |
| if (to_code == from_code) |
| /* If TO is equal to FROM, delete the entry. */ |
| grub_memmove ((char *) &ascii_key_map[i], |
| (char *) &ascii_key_map[i + 1], |
| sizeof (unsigned short) * (KEY_MAP_SIZE - i)); |
| else |
| ascii_key_map[i] = (to_code << 8) | from_code; |
| } |
| |
| return 1; |
| } |
| |
| static struct builtin builtin_setkey = |
| { |
| "setkey", |
| setkey_func, |
| BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_MENU | BUILTIN_HELP_LIST, |
| "setkey [TO_KEY FROM_KEY]", |
| "Change the keyboard map. The key FROM_KEY is mapped to the key TO_KEY." |
| " A key must be an alphabet, a digit, or one of these: escape, exclam," |
| " at, numbersign, dollar, percent, caret, ampersand, asterisk, parenleft," |
| " parenright, minus, underscore, equal, plus, backspace, tab, bracketleft," |
| " braceleft, bracketright, braceright, enter, control, semicolon, colon," |
| " quote, doublequote, backquote, tilde, shift, backslash, bar, comma," |
| " less, period, greater, slash, question, alt, space, capslock, FX (X" |
| " is a digit), and delete. If no argument is specified, reset key" |
| " mappings." |
| }; |
| |
| |
| #ifdef GRUB_UTIL |
| struct stage1_5_map { |
| char *fsys; |
| char *name; |
| }; |
| static struct stage1_5_map stage1_5_map[] = |
| { |
| {"ext2fs", "/e2fs_stage1_5"}, |
| {"fat", "/fat_stage1_5"}, |
| {"ntfs", "/ntfs_stage1_5"}, |
| {"ufs2", "/ufs2_stage1_5"}, |
| {"ffs", "/ffs_stage1_5"}, |
| {"iso9660", "/iso9660_stage1_5"}, |
| {"jfs", "/jfs_stage1_5"}, |
| {"minix", "/minix_stage1_5"}, |
| {"reiserfs", "/reiserfs_stage1_5"}, |
| {"vstafs", "/vstafs_stage1_5"}, |
| {"xfs", "/xfs_stage1_5"} |
| }; |
| |
| #ifdef GRUB_UTIL |
| static int check_file (char *file); |
| static void sprint_device (int drive, int partition); |
| static int embed_stage1_5 (char *stage1_5, int drive, int partition, int flags); |
| static char device[16]; |
| static char tmp[16]; |
| static char stage15[64]; |
| static char cmd_arg[256]; |
| static char stage1[64]; |
| static char stage2[64]; |
| static char config_filename[64]; |
| static char real_config_filename[64]; |
| #else |
| static char *device = (char *)0x700; // use only 16 bytes at 0x700 |
| static char *tmp = (char *)0x710; // use only 16 bytes at 0x710 |
| static char *stage15 = (char *)0x780; // use only 64 bytes at 0x780 |
| /* we cannot use 0x8000 because it is for mbr. So we use 1 sector below 0x2B0000 instead. */ |
| static char *cmd_arg = (char *)(HMA_ADDR - 0x200);//(char *)0x8000; // use 256 bytes at 0x8000 |
| static char *stage1 = (char *)(HMA_ADDR - 0x100);//(char *)0x8100; // use 64 bytes at 0x8100 |
| static char *stage2 = (char *)(HMA_ADDR - 0xC0);//(char *)0x8140; // use 64 bytes at 0x8140 |
| static char *config_filename = (char *)(HMA_ADDR - 0x80);//(char *)0x8180; // use 64 bytes at 0x8180 |
| static char *real_config_filename = (char *)(HMA_ADDR - 0x40);//(char *)0x81C0; // use 64 bytes at 0x81C0 |
| #endif |
| static char *buffer; |
| |
| /* Check if the file FILE exists like Autoconf. */ |
| static int |
| check_file (char *file) |
| { |
| int ret; |
| |
| grub_printf (" Checking if \"%s\" exists... ", file); |
| ret = grub_open (file); |
| if (ret) |
| { |
| grub_close (); |
| grub_printf ("yes\n"); |
| } |
| else |
| grub_printf ("no\n"); |
| |
| return ret; |
| } |
| |
| /* Construct a device name in DEVICE. */ |
| static void |
| sprint_device (int drive, int partition) |
| { |
| grub_sprintf (device, "(%cd%d", |
| ((drive & 0x80) ? 'h' : 'f'), |
| (drive & ~0x80)); |
| if ((partition & 0xFF0000) != 0xFF0000) |
| { |
| //char tmp[16]; |
| grub_sprintf (tmp, ",%d", (unsigned long)(unsigned char)(partition >> 16)); |
| grub_strncat (device, tmp, 16); |
| } |
| if ((partition & 0x00FF00) != 0x00FF00) |
| { |
| //char tmp[16]; |
| grub_sprintf (tmp, ",%c", (unsigned long)(unsigned char)('a' + (partition >> 8))); |
| grub_strncat (device, tmp, 16); |
| } |
| grub_strncat (device, ")", 16); |
| } |
| |
| static int |
| embed_stage1_5 (char *stage1_5, int drive, int partition, int flags) |
| { |
| /* We install GRUB into the MBR, so try to embed the |
| Stage 1.5 in the sectors right after the MBR. */ |
| sprint_device (drive, partition); |
| grub_sprintf (cmd_arg, "%s %s", stage1_5, device); |
| |
| /* Notify what will be run. */ |
| grub_printf (" Running \"embed %s\"... ", cmd_arg); |
| |
| embed_func (cmd_arg, flags); |
| if (! errnum) |
| { |
| /* Construct the blocklist representation. */ |
| grub_sprintf (buffer, "%s%s", device, embed_info); |
| grub_printf ("succeeded\n"); |
| return 1; |
| } |
| else |
| { |
| grub_printf ("failed (this is not fatal)\n"); |
| return 0; |
| } |
| } |
| |
| /* setup */ |
| static int |
| setup_func (char *arg, int flags) |
| { |
| /* Point to the string of the installed drive/partition. */ |
| char *install_ptr; |
| /* Point to the string of the drive/parition where the GRUB images |
| reside. */ |
| char *image_ptr; |
| unsigned long installed_drive, installed_partition; |
| unsigned long image_drive, image_partition; |
| unsigned long tmp_drive, tmp_partition; |
| int is_force_lba = 0; |
| char *stage2_arg = 0; |
| char *prefix = 0; |
| |
| tmp_drive = saved_drive; |
| tmp_partition = saved_partition; |
| |
| buffer = (char *) RAW_ADDR (0x100000); |
| |
| /* Check if the user specifies --force-lba. */ |
| while (1) |
| { |
| if (grub_memcmp ("--force-lba", arg, sizeof ("--force-lba") - 1) == 0) |
| { |
| is_force_lba = 1; |
| arg = skip_to (0, arg); |
| } |
| else if (grub_memcmp ("--prefix=", arg, sizeof ("--prefix=") - 1) == 0) |
| { |
| prefix = arg + sizeof ("--prefix=") - 1; |
| arg = skip_to (0, arg); |
| nul_terminate (prefix); |
| } |
| #ifdef GRUB_UTIL |
| else if (grub_memcmp ("--stage2=", arg, sizeof ("--stage2=") - 1) == 0) |
| { |
| stage2_arg = arg; |
| arg = skip_to (0, arg); |
| nul_terminate (stage2_arg); |
| } |
| #endif /* GRUB_UTIL */ |
| else |
| break; |
| } |
| |
| install_ptr = arg; |
| image_ptr = skip_to (0, install_ptr); |
| |
| /* Make sure that INSTALL_PTR is valid. */ |
| set_device (install_ptr); |
| if (errnum) |
| goto fail;// return 1; |
| |
| installed_drive = current_drive; |
| installed_partition = current_partition; |
| |
| /* Mount the drive pointed by IMAGE_PTR. */ |
| if (*image_ptr) |
| { |
| /* If the drive/partition where the images reside is specified, |
| get the drive and the partition. */ |
| set_device (image_ptr); |
| if (errnum) |
| goto fail;// return 1; |
| } |
| else |
| { |
| /* If omitted, use SAVED_PARTITION and SAVED_DRIVE. */ |
| current_drive = saved_drive; |
| current_partition = saved_partition; |
| } |
| |
| image_drive = saved_drive = current_drive; |
| image_partition = saved_partition = current_partition; |
| |
| /* Open it. */ |
| if (! open_device ()) |
| goto fail; |
| |
| /* Check if stage1 exists. If the user doesn't specify the option |
| `--prefix', attempt /boot/grub and /grub. */ |
| /* NOTE: It is dangerous to run this command without `--prefix' in the |
| grub shell, since that affects `--stage2'. */ |
| if (! prefix) |
| { |
| prefix = "/boot/grub"; |
| grub_sprintf (stage1, "%s%s", prefix, "/stage1"); |
| if (! check_file (stage1)) |
| { |
| errnum = ERR_NONE; |
| prefix = "/grub"; |
| grub_sprintf (stage1, "%s%s", prefix, "/stage1"); |
| if (! check_file (stage1)) |
| goto fail; |
| } |
| } |
| else |
| { |
| grub_sprintf (stage1, "%s%s", prefix, "/stage1"); |
| if (! check_file (stage1)) |
| goto fail; |
| } |
| |
| /* The prefix was determined. */ |
| grub_sprintf (stage2, "%s%s", prefix, "/stage2"); |
| grub_sprintf (config_filename, "%s%s", prefix, "/menu.lst"); |
| *real_config_filename = 0; |
| |
| /* Check if stage2 exists. */ |
| if (! check_file (stage2)) |
| goto fail; |
| |
| { |
| char *fsys = fsys_table[fsys_type].name; |
| int i; |
| int size = sizeof (stage1_5_map) / sizeof (stage1_5_map[0]); |
| |
| /* Iterate finding the same filesystem name as FSYS. */ |
| for (i = 0; i < size; i++) |
| if (grub_strcmp (fsys, stage1_5_map[i].fsys) == 0) |
| { |
| /* OK, check if the Stage 1.5 exists. */ |
| //char stage15[64]; |
| |
| grub_sprintf (stage15, "%s%s", prefix, stage1_5_map[i].name); |
| if (check_file (stage15)) |
| { |
| if (embed_stage1_5 (stage15, installed_drive, installed_partition, flags) |
| || embed_stage1_5 (stage15, image_drive, image_partition, flags)) |
| { |
| grub_strcpy (real_config_filename, config_filename); |
| sprint_device (image_drive, image_partition); |
| grub_sprintf (config_filename, "%s%s", device, stage2); |
| grub_strcpy (stage2, buffer); |
| } |
| } |
| errnum = 0; |
| break; |
| } |
| } |
| |
| /* Construct a string that is used by the command "install" as its |
| arguments. */ |
| sprint_device (installed_drive, installed_partition); |
| |
| #if 1 |
| /* Don't embed a drive number unnecessarily. */ |
| grub_sprintf (cmd_arg, "%s%s%s%s %s%s %s p %s %s", |
| (is_force_lba? "--force-lba " : ""), |
| (stage2_arg? stage2_arg : ""), |
| (stage2_arg? " " : ""), |
| stage1, |
| ((installed_drive != image_drive) ? "d " : ""), |
| device, |
| stage2, |
| config_filename, |
| real_config_filename); |
| #else /* NOT USED */ |
| /* This code was used, because we belived some BIOSes had a problem |
| that they didn't pass a booting drive correctly. It turned out, |
| however, stage1 could trash a booting drive when checking LBA support, |
| because some BIOSes modified the register %dx in INT 13H, AH=48H. |
| So it becamed unclear whether GRUB should use a pre-defined booting |
| drive or not. If the problem still exists, it would be necessary to |
| switch back to this code. */ |
| grub_sprintf (cmd_arg, "%s%s%s%s d %s %s p %s %s", |
| (is_force_lba? "--force-lba " : ""), |
| (stage2_arg? stage2_arg : ""), |
| (stage2_arg? " " : ""), |
| stage1, |
| device, |
| stage2, |
| config_filename, |
| real_config_filename); |
| #endif /* NOT USED */ |
| |
| /* Notify what will be run. */ |
| grub_printf (" Running \"install %s\"... ", cmd_arg); |
| |
| /* Make sure that SAVED_DRIVE and SAVED_PARTITION are identical |
| with IMAGE_DRIVE and IMAGE_PARTITION, respectively. */ |
| saved_drive = image_drive; |
| saved_partition = image_partition; |
| |
| /* Run the command. */ |
| if (install_func (cmd_arg, flags)) |
| grub_printf ("succeeded\nDone.\n"); |
| else |
| grub_printf ("failed\n"); |
| |
| fail: |
| saved_drive = tmp_drive; |
| saved_partition = tmp_partition; |
| // if (debug > 0) |
| // grub_printf ("\n\nNotice: the two commands SETUP and INSTALL will be removed soon! Please use the\nOS utility of BOOTLACE.COM to install GRLDR boot record to the MBR or to the\nboot area of a specified partition.\n\n"); |
| return ! errnum; |
| } |
| |
| static struct builtin builtin_setup = |
| { |
| "setup", |
| setup_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST | BUILTIN_BOOTING, |
| "setup [--prefix=DIR] [--stage2=STAGE2_FILE] [--force-lba]\n INSTALL_DEVICE [IMAGE_DEVICE]", |
| "Set up the installation of GRUB automatically. This command uses" |
| " the more flexible command \"install\" in the backend and installs" |
| " GRUB into the device INSTALL_DEVICE. If IMAGE_DEVICE is specified," |
| " then find the GRUB images in the device IMAGE_DEVICE, otherwise" |
| " use the current \"root device\", which can be set by the command" |
| " \"root\". If you know that your BIOS should support LBA but GRUB" |
| " doesn't work in LBA mode, specify the option `--force-lba'." |
| " If you install GRUB under the grub shell and you cannot unmount the" |
| " partition where GRUB images reside, specify the option `--stage2'" |
| " to tell GRUB the file name under your OS." |
| }; |
| #endif /* GRUB_UTIL */ |
| |
| |
| #if defined(SUPPORT_SERIAL) || defined(SUPPORT_HERCULES) || defined(SUPPORT_GRAPHICS) |
| /* terminal */ |
| static int |
| terminal_func (char *arg, int flags) |
| { |
| /* The index of the default terminal in TERM_TABLE. */ |
| int default_term = -1; |
| struct term_entry *prev_term = current_term; |
| unsigned long long to = -1; |
| unsigned long long lines = 0; |
| int no_message = 0; |
| unsigned long term_flags = 0; |
| /* XXX: Assume less than 32 terminals. */ |
| unsigned long term_bitmap = 0; |
| |
| /* Get GNU-style long options. */ |
| while (1) |
| { |
| if (grub_memcmp (arg, "--dumb", sizeof ("--dumb") - 1) == 0) |
| term_flags |= TERM_DUMB; |
| else if (grub_memcmp (arg, "--no-echo", sizeof ("--no-echo") - 1) == 0) |
| /* ``--no-echo'' implies ``--no-edit''. */ |
| term_flags |= (TERM_NO_ECHO | TERM_NO_EDIT); |
| else if (grub_memcmp (arg, "--no-edit", sizeof ("--no-edit") - 1) == 0) |
| term_flags |= TERM_NO_EDIT; |
| else if (grub_memcmp (arg, "--timeout=", sizeof ("--timeout=") - 1) == 0) |
| { |
| char *val = arg + sizeof ("--timeout=") - 1; |
| |
| if (! safe_parse_maxint (&val, &to)) |
| return 0; |
| } |
| else if (grub_memcmp (arg, "--lines=", sizeof ("--lines=") - 1) == 0) |
| { |
| char *val = arg + sizeof ("--lines=") - 1; |
| |
| if (! safe_parse_maxint (&val, &lines)) |
| return 0; |
| |
| /* Probably less than four is meaningless.... */ |
| if (lines < 4) |
| { |
| errnum = ERR_BAD_ARGUMENT; |
| return 0; |
| } |
| } |
| else if (grub_memcmp (arg, "--silent", sizeof ("--silent") - 1) == 0) |
| no_message = 1; |
| else |
| break; |
| |
| arg = skip_to (0, arg); |
| } |
| |
| /* If no argument is specified, show current setting. */ |
| if (! *arg) |
| { |
| if (debug > 0) |
| grub_printf ("%s%s%s%s\n", |
| current_term->name, |
| (current_term->flags & TERM_DUMB ? " (dumb)" : ""), |
| (current_term->flags & TERM_NO_EDIT ? " (no edit)" : ""), |
| (current_term->flags & TERM_NO_ECHO ? " (no echo)" : "")); |
| return 1; |
| } |
| |
| while (*arg) |
| { |
| int i; |
| char *next = skip_to (0, arg); |
| |
| nul_terminate (arg); |
| |
| for (i = 0; term_table[i].name; i++) |
| { |
| if (grub_strcmp (arg, term_table[i].name) == 0) |
| { |
| if (term_table[i].flags & TERM_NEED_INIT) |
| { |
| errnum = ERR_DEV_NEED_INIT; |
| return 1; |
| } |
| |
| if (default_term < 0) |
| default_term = i; |
| |
| term_bitmap |= (1 << i); |
| break; |
| } |
| } |
| |
| if (! term_table[i].name) |
| { |
| errnum = ERR_BAD_ARGUMENT; |
| return 0; |
| } |
| |
| arg = next; |
| } |
| |
| /* If multiple terminals are specified, wait until the user pushes any |
| key on one of the terminals. */ |
| if (term_bitmap & ~(1 << default_term)) |
| { |
| time2 = -1; |
| |
| /* XXX: Disable the pager. */ |
| count_lines = -1; |
| |
| /* Get current time. */ |
| while ((time1 = getrtsecs ()) == 0xFF) |
| ; |
| |
| /* Wait for a key input. */ |
| while (to) |
| { |
| int i; |
| |
| for (i = 0; term_table[i].name; i++) |
| { |
| if (term_bitmap & (1 << i)) |
| { |
| if (term_table[i].checkkey () >= 0) |
| { |
| (void) term_table[i].getkey (); |
| default_term = i; |
| |
| goto end; |
| } |
| } |
| } |
| |
| /* Prompt the user, once per sec. */ |
| if ((time1 = getrtsecs ()) != time2 && time1 != 0xFF) |
| { |
| if (! no_message) |
| { |
| /* Need to set CURRENT_TERM to each of selected |
| terminals. */ |
| for (i = 0; term_table[i].name; i++) |
| if (term_bitmap & (1 << i)) |
| { |
| current_term = term_table + i; |
| grub_printf ("\rPress any key to continue.\n"); |
| } |
| |
| /* Restore CURRENT_TERM. */ |
| current_term = prev_term; |
| } |
| |
| time2 = time1; |
| if (to > 0) |
| to--; |
| } |
| } |
| } |
| |
| end: |
| current_term = term_table + default_term; |
| current_term->flags = term_flags; |
| |
| if (lines) |
| max_lines = lines; |
| else |
| max_lines = current_term->max_lines; |
| |
| /* If the interface is currently the command-line, |
| restart it to repaint the screen. */ |
| if (current_term != prev_term /*&& (flags & BUILTIN_CMDLINE)*/) |
| { |
| if (prev_term->shutdown) |
| prev_term->shutdown(); |
| if (current_term->startup) |
| current_term->startup(); |
| // grub_longjmp (restart_cmdline_env, 0); |
| } |
| |
| return 1; |
| } |
| |
| static struct builtin builtin_terminal = |
| { |
| "terminal", |
| terminal_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "terminal [--dumb] [--no-echo] [--no-edit] [--timeout=SECS]\n [--lines=LINES] [--silent] [console] [serial] [hercules] [graphics]", |
| "Select a terminal. When multiple terminals are specified, wait until" |
| " you push any key to continue. If both console and serial are specified," |
| " the terminal to which you input a key first will be selected. If no" |
| " argument is specified, print current setting. The option --dumb" |
| " specifies that your terminal is dumb, otherwise, vt100-compatibility" |
| " is assumed. If you specify --no-echo, input characters won't be echoed." |
| " If you specify --no-edit, the BASH-like editing feature will be disabled." |
| " If --timeout is present, this command will wait at most for SECS" |
| " seconds. The option --lines specifies the maximum number of lines." |
| " The option --silent is used to suppress messages." |
| }; |
| #endif /* SUPPORT_SERIAL || SUPPORT_HERCULES || SUPPORT_GRAPHICS */ |
| |
| |
| #ifdef SUPPORT_SERIAL |
| |
| #ifdef GRUB_UTIL |
| static struct terminfo term1; //struct takes up 200 bytes!! |
| static struct terminfo *term = &term1; |
| |
| static struct |
| { |
| const char *name; |
| char *var; |
| } |
| options[] = |
| { |
| {"--name=", term1.name}, |
| {"--cursor-address=", term1.cursor_address}, |
| {"--clear-screen=", term1.clear_screen}, |
| {"--enter-standout-mode=", term1.enter_standout_mode}, |
| {"--exit-standout-mode=", term1.exit_standout_mode} |
| }; |
| #else |
| static struct terminfo *term = (struct terminfo *)0x8000; //use 200 bytes |
| |
| static struct |
| { |
| const char *name; |
| char *var; |
| } |
| options[] = |
| { |
| {"--name=", ((struct terminfo *)0x8000)->name}, |
| {"--cursor-address=", ((struct terminfo *)0x8000)->cursor_address}, |
| {"--clear-screen=", ((struct terminfo *)0x8000)->clear_screen}, |
| {"--enter-standout-mode=", ((struct terminfo *)0x8000)->enter_standout_mode}, |
| {"--exit-standout-mode=", ((struct terminfo *)0x8000)->exit_standout_mode} |
| }; |
| #endif |
| |
| static int |
| terminfo_func (char *arg, int flags) |
| { |
| if (*arg) |
| { |
| grub_memset (term, 0, sizeof (struct terminfo)); |
| |
| while (*arg) |
| { |
| int i; |
| char *next = skip_to (0, arg); |
| |
| nul_terminate (arg); |
| |
| for (i = 0; i < sizeof (options) / sizeof (options[0]); i++) |
| { |
| const char *name = options[i].name; |
| int len = grub_strlen (name); |
| |
| if (! grub_memcmp (arg, name, len)) |
| { |
| grub_strcpy (options[i].var, ti_unescape_string (arg + len)); |
| break; |
| } |
| } |
| |
| if (i == sizeof (options) / sizeof (options[0])) |
| { |
| errnum = ERR_BAD_ARGUMENT; |
| return ! errnum; |
| } |
| |
| arg = next; |
| } |
| |
| if (term->name[0] == 0 || term->cursor_address[0] == 0) |
| { |
| errnum = ERR_BAD_ARGUMENT; |
| return ! errnum; |
| } |
| |
| ti_set_term (term); |
| } |
| else |
| { |
| /* No option specifies printing out current settings. */ |
| ti_get_term (term); |
| |
| grub_printf ("name=%s\n", |
| (ti_escape_string (term->name))); |
| grub_printf ("cursor_address=%s\n", |
| (ti_escape_string (term->cursor_address))); |
| grub_printf ("clear_screen=%s\n", |
| (ti_escape_string (term->clear_screen))); |
| grub_printf ("enter_standout_mode=%s\n", |
| (ti_escape_string (term->enter_standout_mode))); |
| grub_printf ("exit_standout_mode=%s\n", |
| (ti_escape_string (term->exit_standout_mode))); |
| } |
| |
| return 1; |
| } |
| |
| static struct builtin builtin_terminfo = |
| { |
| "terminfo", |
| terminfo_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "terminfo [--name=NAME --cursor-address=SEQ [--clear-screen=SEQ]" |
| "\n [--enter-standout-mode=SEQ] [--exit-standout-mode=SEQ]]", |
| |
| "Define the capabilities of your terminal. Use this command to" |
| " define escape sequences, if it is not vt100-compatible." |
| " You may use \\e for ESC and ^X for a control character." |
| " If no option is specified, the current settings are printed." |
| }; |
| #endif /* SUPPORT_SERIAL */ |
| |
| |
| #if 0 |
| /* testload */ |
| static int |
| testload_func (char *arg, int flags) |
| { |
| //int i; |
| |
| kernel_type = KERNEL_TYPE_NONE; |
| |
| if (! grub_open (arg)) |
| return 0; |
| |
| disk_read_hook = disk_read_print_func; |
| |
| /* Perform filesystem test on the specified file. */ |
| /* Read whole file first. */ |
| grub_printf ("Whole file: "); |
| |
| grub_read ((char *) RAW_ADDR (0x300000), -1); |
| |
| /* Now compare two sections of the file read differently. */ |
| |
| for (i = 0; i < 0x10ac0; i++) |
| { |
| *((unsigned char *) RAW_ADDR (0x400000 + i)) = 0; |
| *((unsigned char *) RAW_ADDR (0x500000 + i)) = 1; |
| } |
| |
| /* First partial read. */ |
| grub_printf ("\nPartial read 1: "); |
| |
| filepos = 0; |
| grub_read ((char *) RAW_ADDR (0x400000), 0x7); |
| grub_read ((char *) RAW_ADDR (0x400007), 0x100); |
| grub_read ((char *) RAW_ADDR (0x400107), 0x10); |
| grub_read ((char *) RAW_ADDR (0x400117), 0x999); |
| grub_read ((char *) RAW_ADDR (0x400ab0), 0x10); |
| grub_read ((char *) RAW_ADDR (0x400ac0), 0x10000); |
| |
| /* Second partial read. */ |
| grub_printf ("\nPartial read 2: "); |
| |
| filepos = 0; |
| grub_read ((char *) RAW_ADDR (0x500000), 0x10000); |
| grub_read ((char *) RAW_ADDR (0x510000), 0x10); |
| grub_read ((char *) RAW_ADDR (0x510010), 0x7); |
| grub_read ((char *) RAW_ADDR (0x510017), 0x10); |
| grub_read ((char *) RAW_ADDR (0x510027), 0x999); |
| grub_read ((char *) RAW_ADDR (0x5109c0), 0x100); |
| |
| grub_printf ("\nHeader1 = 0x%x, next = 0x%x, next = 0x%x, next = 0x%x\n", |
| *((int *) RAW_ADDR (0x400000)), |
| *((int *) RAW_ADDR (0x400004)), |
| *((int *) RAW_ADDR (0x400008)), |
| *((int *) RAW_ADDR (0x40000c))); |
| |
| grub_printf ("Header2 = 0x%x, next = 0x%x, next = 0x%x, next = 0x%x\n", |
| *((int *) RAW_ADDR (0x500000)), |
| *((int *) RAW_ADDR (0x500004)), |
| *((int *) RAW_ADDR (0x500008)), |
| *((int *) RAW_ADDR (0x50000c))); |
| |
| for (i = 0; i < 0x10ac0; i++) |
| if (*((unsigned char *) RAW_ADDR (0x400000 + i)) |
| != *((unsigned char *) RAW_ADDR (0x500000 + i))) |
| break; |
| |
| grub_printf ("Max is 0x10ac0: i=0x%x, filepos=0x%x\n", i, filepos); |
| disk_read_hook = 0; |
| grub_close (); |
| return 1; |
| } |
| |
| static struct builtin builtin_testload = |
| { |
| "testload", |
| testload_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT, |
| "testload FILE", |
| "Read the entire contents of FILE in several different ways and" |
| " compares them, to test the filesystem code. The output is somewhat" |
| " cryptic, but if no errors are reported and the final `i=X," |
| " filepos=Y' reading has X and Y equal, then it is definitely" |
| " consistent, and very likely works correctly subject to a" |
| " consistent offset error. If this test succeeds, then a good next" |
| " step is to try loading a kernel." |
| }; |
| #endif |
| |
| |
| #ifdef GRUB_UTIL |
| static struct vbe_controller controller1; //struct size 512 |
| static struct vbe_mode mode1; //struct size 255 |
| static struct vbe_controller *controller = &controller1; |
| static struct vbe_mode *mode = &mode1; |
| #else |
| static struct vbe_controller *controller = (struct vbe_controller *)0x8000;//use 512 bytes |
| static struct vbe_mode *mode = (struct vbe_mode *)0x700;//use 255 bytes |
| #endif |
| /* testvbe MODE */ |
| static int |
| testvbe_func (char *arg, int flags) |
| { |
| unsigned long long mode_number; |
| // struct vbe_controller controller; //struct size 512 |
| // struct vbe_mode mode; //struct size 255 |
| |
| if (! *arg) |
| { |
| errnum = ERR_BAD_ARGUMENT; |
| return 0; |
| } |
| |
| if (! safe_parse_maxint (&arg, &mode_number)) |
| return 0; |
| |
| /* Preset `VBE2'. */ |
| grub_memmove (controller->signature, "VBE2", 4); |
| |
| /* Detect VBE BIOS. */ |
| if (get_vbe_controller_info (controller) != 0x004F) |
| { |
| if (debug > 0) |
| grub_printf (" VBE BIOS is not present.\n"); |
| return 0; |
| } |
| |
| if (controller->version < 0x0200) |
| { |
| if (debug > 0) |
| grub_printf (" VBE version %d.%d is not supported.\n", |
| (unsigned long)(controller->version >> 8), |
| (unsigned long)(unsigned char)(controller->version)); |
| return 0; |
| } |
| |
| if (get_vbe_mode_info (mode_number, mode) != 0x004F |
| || (mode->mode_attributes & 0x0091) != 0x0091) |
| { |
| if (debug > 0) |
| grub_printf (" Mode 0x%x is not supported.\n", mode_number); |
| return 0; |
| } |
| |
| /* Now trip to the graphics mode. */ |
| if (set_vbe_mode (mode_number | (1 << 14)) != 0x004F) |
| { |
| if (debug > 0) |
| grub_printf (" Switching to Mode 0x%x failed.\n", mode_number); |
| return 0; |
| } |
| |
| /* Draw something on the screen... */ |
| { |
| unsigned char *base_buf = (unsigned char *) mode->phys_base; |
| int scanline = controller->version >= 0x0300 |
| ? mode->linear_bytes_per_scanline : mode->bytes_per_scanline; |
| /* FIXME: this assumes that any depth is a modulo of 8. */ |
| int bpp = mode->bits_per_pixel / 8; |
| int width = mode->x_resolution; |
| int height = mode->y_resolution; |
| int x, y; |
| unsigned color = 0; |
| |
| /* Iterate drawing on the screen, until the user hits any key. */ |
| while (checkkey () == -1) |
| { |
| for (y = 0; y < height; y++) |
| { |
| unsigned char *line_buf = base_buf + scanline * y; |
| |
| for (x = 0; x < width; x++) |
| { |
| unsigned char *buf = line_buf + bpp * x; |
| int i; |
| |
| for (i = 0; i < bpp; i++, buf++) |
| *buf = (color >> (i * 8)) & 0xff; |
| } |
| |
| color++; |
| } |
| } |
| |
| /* Discard the input. */ |
| getkey (); |
| } |
| |
| /* Back to the default text mode. */ |
| if (set_vbe_mode (0x03) != 0x004F) |
| { |
| #if 1 |
| if (debug > 0) |
| grub_printf ("\nSwitching to text mode failed!!\n"); |
| return 0; |
| #else |
| /* Why?! */ |
| grub_reboot (); |
| #endif |
| } |
| |
| return 1; |
| } |
| |
| static struct builtin builtin_testvbe = |
| { |
| "testvbe", |
| testvbe_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "testvbe MODE", |
| "Test the VBE mode MODE. Hit any key to return." |
| }; |
| |
| static inline unsigned long vbe_far_ptr_to_linear (unsigned long ptr) |
| { |
| unsigned short seg = (ptr >> 16); |
| unsigned short off = (ptr & 0xFFFF); |
| |
| return (seg << 4) + off; |
| } |
| |
| |
| static struct vbe_mode * |
| find_video_mode(/*struct vbe_controller *controller,*/ int width, int height, int depth, int *mode_number) |
| { |
| // if height == depth == 0, then width is not a width but a mode number |
| // static struct vbe_mode mode; |
| int i; |
| |
| if (!height && !depth) { |
| if (get_vbe_mode_info (width, mode) == 0x004F) |
| if ((mode->mode_attributes & 0x0091) == 0x0091) { |
| *mode_number = width; |
| return mode; |
| } |
| } |
| |
| for (i = 0; i<0x200; i++) |
| { |
| if (get_vbe_mode_info (i, mode) != 0x004F) |
| continue; |
| |
| /* Skip this, if this is not supported or linear frame buffer |
| mode is not support. */ |
| if ((mode->mode_attributes & 0x0091) != 0x0091) |
| continue; |
| |
| if (debug > 0) |
| printf("Mode (0x%x) %dx%dx%d %x %x\n", |
| (unsigned long)i, |
| (unsigned long)mode->x_resolution, |
| (unsigned long)mode->y_resolution, |
| (unsigned long)mode->bits_per_pixel, |
| (unsigned long)mode->mode_attributes, |
| (unsigned long)mode->phys_base); |
| |
| if ((mode->x_resolution == width) && |
| (mode->y_resolution == height) && |
| (mode->bits_per_pixel == depth)) { |
| *mode_number = i; |
| return mode; |
| } |
| } |
| return NULL; |
| } |
| |
| /* setvbe (Contributed by Gerardo Richarte. Thanks!) */ |
| /* set the `video=' option for the next `kernel' command. */ |
| static int |
| setvbe_func (char *arg, int flags) |
| { |
| int mode_number; |
| unsigned long long width = 10000; |
| unsigned long long height = 10000; |
| unsigned long long depth = 128; |
| |
| // struct vbe_controller controller; //struct size 512 |
| // struct vbe_mode mode; //struct size 255 |
| struct vbe_mode *mode2; |
| |
| if (!*arg) |
| { |
| *kernel_option_video = 0; /* initialize the string to be empty. */ |
| if (debug > 0) |
| grub_printf ("\nVideo option cleared. Nothing will be added to subsequent kernel command-line.\n"); |
| errnum = 0; |
| return 1; |
| } |
| |
| errnum = ERR_BAD_ARGUMENT; |
| if (! safe_parse_maxint (&arg, &width)) |
| return 0; |
| if (*arg == 'x') { |
| arg++; |
| if (! safe_parse_maxint (&arg, &height)) |
| return 0; |
| arg++; |
| if (! safe_parse_maxint (&arg, &depth)) |
| return 0; |
| } else { |
| height = depth = 0; |
| } |
| |
| if (debug > 0) |
| grub_printf ("Trying setvbe for resolution %dx%dx%d\n", (unsigned long)width, (unsigned long)height, (unsigned long)depth); |
| |
| /* Preset `VBE2'. */ |
| grub_memmove (controller->signature, "VBE2", 4); |
| |
| /* Detect VBE BIOS. */ |
| if (get_vbe_controller_info (controller) != 0x004F) |
| { |
| if (debug > 0) |
| grub_printf (" VBE BIOS is not present.\n"); |
| return 0; |
| } |
| |
| if (controller->version < 0x0200) |
| { |
| if (debug > 0) |
| grub_printf (" VBE version %d.%d is not supported.\n", |
| (unsigned long) (controller->version >> 8), |
| (unsigned long)(unsigned char) (controller->version)); |
| return 0; |
| } |
| |
| mode2 = find_video_mode(/*controller,*/ width, height, depth, &mode_number); |
| |
| if (!mode2) |
| { |
| if (debug > 0) |
| grub_printf (" Resolution %dx%dx%d not found. Try vbeprobe command to see available modes\n", (unsigned long)width, (unsigned long)height, (unsigned long)depth); |
| return 0; |
| } |
| |
| /* Now trip to the graphics mode. */ |
| if (set_vbe_mode (mode_number | (1 << 14)) != 0x004F) |
| { |
| if (debug > 0) |
| grub_printf (" Switching to Mode 0x%x failed.\n", (unsigned long)mode_number); |
| return 0; |
| } |
| |
| grub_sprintf (kernel_option_video, " video=%dx%dx%d@0x%x,%d", mode2->x_resolution, mode2->y_resolution, mode2->bits_per_pixel, mode2->phys_base, ((controller->version >= 0x0300) ? (mode2->linear_bytes_per_scanline) : (mode2->bytes_per_scanline))); |
| |
| if (debug > 0) |
| grub_printf ("\nThe option \"%s\" will be automatically\nappended to each subsequent kernel command-line.\n", kernel_option_video); |
| |
| errnum = 0; |
| return 1; |
| } |
| |
| static struct builtin builtin_setvbe = |
| { |
| "setvbe", |
| setvbe_func, |
| BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_MENU | BUILTIN_HELP_LIST, |
| "setvbe [MODE_3D]", |
| "Set the VBE mode MODE_3D(which is of the form 1024x768x32) for each subsequent kernel command-line." |
| " If no argument is specified, clear(nullify, invalidate) the video option" |
| " string setup by the previous setvbe command." |
| }; |
| |
| |
| #ifdef SUPPORT_NETBOOT |
| /* tftpserver */ |
| static int |
| tftpserver_func (char *arg, int flags) |
| { |
| if (! *arg || ! ifconfig (0, 0, 0, arg)) |
| { |
| errnum = ERR_BAD_ARGUMENT; |
| return 0; |
| } |
| |
| print_network_configuration (); |
| return 1; |
| } |
| |
| static struct builtin builtin_tftpserver = |
| { |
| "tftpserver", |
| tftpserver_func, |
| BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_MENU | BUILTIN_HELP_LIST, |
| "tftpserver IPADDR", |
| "Override the TFTP server address." |
| }; |
| #endif /* SUPPORT_NETBOOT */ |
| |
| |
| /* timeout */ |
| static int |
| timeout_func (char *arg, int flags) |
| { |
| unsigned long long ull; |
| if (! safe_parse_maxint (&arg, &ull)) |
| return 0; |
| |
| grub_timeout = ull; |
| return 1; |
| } |
| |
| static struct builtin builtin_timeout = |
| { |
| "timeout", |
| timeout_func, |
| BUILTIN_MENU, |
| #if 0 |
| "timeout SEC", |
| "Set a timeout, in SEC seconds, before automatically booting the" |
| " default entry (normally the first entry defined)." |
| #endif |
| }; |
| |
| |
| /* title */ |
| //static int |
| //title_func (char *arg, int flags) |
| //{ |
| // /* This function is not actually used at least currently. */ |
| // return 1; |
| //} |
| |
| struct builtin builtin_title = |
| { |
| "title", |
| NULL/*title_func*/, |
| 0/*BUILTIN_TITLE*/, |
| #if 0 |
| "title [NAME ...]", |
| "Start a new boot entry, and set its name to the contents of the" |
| " rest of the line, starting with the first non-space character." |
| #endif |
| }; |
| |
| |
| #if ! defined(GRUB_UTIL) && ! defined (STAGE1_5) |
| extern int tpm_init(void); |
| /* tpm */ |
| static int |
| tpm_func (char *arg, int flags) |
| { |
| for (;;) |
| { |
| if (grub_memcmp (arg, "--init", 6) == 0) |
| { |
| return tpm_init(); |
| } |
| else |
| return ! (errnum = ERR_BAD_ARGUMENT); |
| arg = skip_to (0, arg); |
| } |
| |
| return 1; |
| } |
| |
| static struct builtin builtin_tpm = |
| { |
| "tpm", |
| tpm_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "tpm --init", |
| "Initialise TPM." |
| }; |
| #endif /* ! defined(GRUB_UTIL) && ! defined (STAGE1_5) */ |
| |
| |
| /* unhide */ |
| static int |
| unhide_func (char *arg, int flags) |
| { |
| /* If no arguments, unhide current partition in the current drive. */ |
| if (! *arg || *arg == ' ' || *arg == '\t') |
| { |
| current_drive = saved_drive; |
| current_partition = saved_partition; |
| } |
| else if (! set_device (arg)) |
| return 0; |
| |
| return set_partition_hidden_flag (0); |
| } |
| |
| static struct builtin builtin_unhide = |
| { |
| "unhide", |
| unhide_func, |
| BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_MENU | BUILTIN_HELP_LIST, |
| "unhide [PARTITION]", |
| "Unhide PARTITION by clearing the \"hidden\" bit in its" |
| " partition type code. The default partition is the current" |
| " root device." |
| }; |
| |
| |
| #if 0 |
| /* uppermem */ |
| static int |
| uppermem_func (char *arg, int flags) |
| { |
| if (! safe_parse_maxint (&arg, (int *)(void *) &mbi.mem_upper)) |
| return 0; |
| |
| mbi.flags &= ~MB_INFO_MEM_MAP; |
| return 1; |
| } |
| |
| static struct builtin builtin_uppermem = |
| { |
| "uppermem", |
| uppermem_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "uppermem KBYTES", |
| "Force GRUB to assume that only KBYTES kilobytes of upper memory are" |
| " installed. Any system address range maps are discarded." |
| }; |
| #endif |
| |
| |
| /* vbeprobe */ |
| static int |
| vbeprobe_func (char *arg, int flags) |
| { |
| // struct vbe_controller controller; //struct size 512 |
| unsigned short *mode_list; |
| unsigned long long mode_number = -1; |
| |
| if (*arg) |
| { |
| if (! safe_parse_maxint (&arg, &mode_number)) |
| return 0; |
| } |
| |
| /* Set the signature to `VBE2', to obtain VBE 3.0 information. */ |
| grub_memmove (controller->signature, "VBE2", 4); |
| |
| if (get_vbe_controller_info (controller) != 0x004F) |
| { |
| if (debug > 0) |
| grub_printf (" VBE BIOS is not present.\n"); |
| return 0; |
| } |
| |
| /* Check the version. */ |
| if (controller->version < 0x0200) |
| { |
| if (debug > 0) |
| grub_printf (" VBE version %d.%d is not supported.\n", |
| (unsigned long) (controller->version >> 8), |
| (unsigned long)(unsigned char) (controller->version)); |
| return 0; |
| } |
| |
| /* Print some information. */ |
| if (debug > 0) |
| grub_printf (" VBE version %d.%d\n", |
| (unsigned long) (controller->version >> 8), |
| (unsigned long)(unsigned char) (controller->version)); |
| |
| /* Iterate probing modes. */ |
| for (mode_list |
| = (unsigned short *) vbe_far_ptr_to_linear (controller->video_mode); |
| *mode_list != 0xFFFF; |
| mode_list++) |
| { |
| // struct vbe_mode mode; //struct size 255 |
| |
| if (get_vbe_mode_info (*mode_list, mode) != 0x004F) |
| continue; |
| |
| /* Skip this, if this is not supported or linear frame buffer |
| mode is not support. */ |
| if ((mode->mode_attributes & 0x0081) != 0x0081) |
| continue; |
| |
| if (mode_number == -1 || mode_number == *mode_list) |
| { |
| char *model; |
| switch (mode->memory_model) |
| { |
| case 0x00: model = "Text"; break; |
| case 0x01: model = "CGA graphics"; break; |
| case 0x02: model = "Hercules graphics"; break; |
| case 0x03: model = "Planar"; break; |
| case 0x04: model = "Packed pixel"; break; |
| case 0x05: model = "Non-chain 4, 256 color"; break; |
| case 0x06: model = "Direct Color"; break; |
| case 0x07: model = "YUV"; break; |
| default: model = "Unknown"; break; |
| } |
| |
| if (debug > 0) |
| grub_printf (" 0x%x: %s, %ux%ux%u\n", |
| (unsigned long) *mode_list, |
| model, |
| (unsigned long) mode->x_resolution, |
| (unsigned long) mode->y_resolution, |
| (unsigned long) mode->bits_per_pixel); |
| |
| if (mode_number != -1) |
| break; |
| } |
| } |
| |
| if (mode_number != -1 && mode_number != *mode_list) |
| if (debug > 0) |
| grub_printf (" Mode 0x%x is not found or supported.\n", (unsigned long)mode_number); |
| |
| return 1; |
| } |
| |
| static struct builtin builtin_vbeprobe = |
| { |
| "vbeprobe", |
| vbeprobe_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "vbeprobe [MODE]", |
| "Probe VBE information. If the mode number MODE is specified, show only" |
| " the information about only the mode." |
| }; |
| |
| |
| int |
| builtin_cmd (char *cmd, char *arg, int flags) |
| { |
| struct builtin *builtin1 = 0; |
| |
| builtin1 = find_command (cmd); |
| |
| if ((int)builtin1 != -1) |
| { |
| if (! builtin1 || ! (builtin1->flags & flags)) |
| { |
| errnum = ERR_UNRECOGNIZED; |
| return 0; |
| } |
| else |
| { |
| return (builtin1->func) (arg, flags); |
| } |
| } |
| return 0; |
| /* if ((int)builtin1 != -1) |
| { |
| return (builtin1->func) (arg, flags); |
| } |
| else |
| { |
| return command_func (arg, flags); |
| } |
| */ |
| } |
| |
| static unsigned long long read_val(char **str_ptr) |
| { |
| char *p; |
| char *arg = *str_ptr; |
| unsigned long long val_t; |
| unsigned long long val; |
| while (*arg == ' ' || *arg == '\t') arg++; |
| p = arg; |
| if (*arg == '*') arg++; |
| if (! safe_parse_maxint_with_suffix (&arg, &val_t , 0)) |
| { |
| return 0; |
| } |
| val = val_t; |
| if (*p == '*') |
| { |
| val = *(unsigned long long *)(unsigned long)val_t; |
| } |
| while (*arg == ' ' || *arg == '\t') arg++; |
| *str_ptr = arg; |
| return val; |
| } |
| |
| static int |
| calc_func (char *arg, int flags) |
| { |
| unsigned long long val_t; |
| unsigned long long *val, val1, val2 = 0; |
| char O; |
| char *P = arg; |
| if (*P == '*') arg++; |
| if (! safe_parse_maxint_with_suffix (&arg, &val_t, 0)) |
| { |
| return 0; |
| } |
| val1 = val_t; |
| val = &val1; |
| if (*P == '*') |
| { |
| val = (unsigned long long *)(unsigned long)(val_t); |
| val1 = *val; |
| } |
| |
| while (*arg == ' ' || *arg == '\t') arg++; |
| if (*arg == '=') |
| { |
| arg++; |
| val1 = read_val(&arg); |
| *val = val1; |
| } |
| while (*arg) |
| { |
| val2 = 0ULL; |
| O = *arg; |
| arg++; |
| if (O == '>' || O == '<') |
| { |
| if (*arg != O) |
| return 0; |
| arg++; |
| } |
| else if ((O == '+' || O == '-') && (*arg == O)) |
| { |
| val2 = 1ULL; |
| arg++; |
| } |
| if (!val2) |
| val2 = read_val(&arg); |
| switch(O) |
| { |
| case '+': |
| *val += val2; |
| break; |
| case '-': |
| *val -= val2; |
| break; |
| case '*': |
| *val *= val2; |
| break; |
| case '/': |
| *(unsigned long *)val /= (unsigned long)val2; |
| break; |
| case '%': |
| *(unsigned long *)val %= (unsigned long)val2; |
| break; |
| case '&': |
| *val &= val2; |
| break; |
| case '|': |
| *val |= val2; |
| break; |
| case '^': |
| *val ^= val2; |
| break; |
| case '<': |
| *val <<= val2; |
| break; |
| case '>': |
| *val >>= val2; |
| break; |
| default: |
| return 0; |
| } |
| } |
| // val1 = *val; |
| if (debug > 0) |
| printf(" %ld (HEX:0x%lX)\n",*val,*val); |
| return *val; |
| } |
| |
| static struct builtin builtin_calc = |
| { |
| "calc", |
| calc_func, |
| BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST, |
| "calc [*INTEGER=] [*]INTEGER OPERATOR [[*]INTEGER]", |
| "GRUB4DOS Simple Calculator.\n" |
| "Available Operators: + - * / % << >> ^ & |" |
| "\nNote: this is a Simple Calculator and From left to right only." |
| }; |
| |
| /* The table of builtin commands. Sorted in dictionary order. */ |
| struct builtin *builtin_table[] = |
| { |
| #ifdef SUPPORT_GRAPHICS |
| &builtin_background, |
| #endif |
| &builtin_blocklist, |
| #ifndef GRUB_UTIL |
| &builtin_boot, |
| #ifdef SUPPORT_NETBOOT |
| &builtin_bootp, |
| #endif /* SUPPORT_NETBOOT */ |
| #endif /* ! GRUB_UTIL */ |
| &builtin_calc, |
| &builtin_cat, |
| #if ! defined(GRUB_UTIL) && ! defined (STAGE1_5) |
| &builtin_cdrom, |
| #endif |
| &builtin_chainloader, |
| &builtin_checkrange, |
| #ifndef GRUB_UTIL |
| &builtin_checktime, |
| #endif |
| &builtin_clear, |
| &builtin_cmp, |
| &builtin_color, |
| &builtin_command, |
| &builtin_commandline, |
| &builtin_configfile, |
| #ifndef GRUB_UTIL |
| &builtin_dd, |
| #endif |
| &builtin_debug, |
| &builtin_default, |
| #ifdef GRUB_UTIL |
| &builtin_device, |
| #endif /* GRUB_UTIL */ |
| #ifdef SUPPORT_NETBOOT |
| &builtin_dhcp, |
| #endif /* SUPPORT_NETBOOT */ |
| // &builtin_displayapm, |
| &builtin_displaymem, |
| #ifdef GRUB_UTIL |
| &builtin_dump, |
| &builtin_embed, |
| #endif /* GRUB_UTIL */ |
| &builtin_errnum, |
| &builtin_errorcheck, |
| &builtin_fallback, |
| &builtin_find, |
| #ifdef SUPPORT_GRAPHICS |
| &builtin_foreground, |
| #endif |
| &builtin_fstest, |
| &builtin_geometry, |
| #ifdef SUPPORT_GFX |
| &builtin_gfxmenu, |
| #endif |
| &builtin_halt, |
| &builtin_help, |
| &builtin_hiddenflag, |
| &builtin_hiddenmenu, |
| &builtin_hide, |
| #ifdef SUPPORT_NETBOOT |
| &builtin_ifconfig, |
| #endif /* SUPPORT_NETBOOT */ |
| // &builtin_impsprobe, |
| &builtin_initrd, |
| #ifdef GRUB_UTIL |
| &builtin_install, |
| #endif /* GRUB_UTIL */ |
| // &builtin_ioprobe, |
| &builtin_is64bit, |
| &builtin_kernel, |
| &builtin_lock, |
| #ifndef STAGE1_5 |
| &builtin_ls, |
| #endif /* STAGE1_5 */ |
| &builtin_makeactive, |
| #ifndef GRUB_UTIL |
| &builtin_map, |
| #endif /* ! GRUB_UTIL */ |
| #ifdef USE_MD5_PASSWORDS |
| &builtin_md5crypt, |
| #endif /* USE_MD5_PASSWORDS */ |
| &builtin_module, |
| &builtin_modulenounzip, |
| #ifdef SUPPORT_GRAPHICS |
| &builtin_outline, |
| #endif /* SUPPORT_GRAPHICS */ |
| &builtin_pager, |
| &builtin_partnew, |
| &builtin_parttype, |
| &builtin_password, |
| &builtin_pause, |
| #ifdef FSYS_PXE |
| &builtin_pxe, |
| #endif |
| //#ifdef GRUB_UTIL |
| &builtin_quit, |
| //#endif /* GRUB_UTIL */ |
| #ifndef GRUB_UTIL |
| #ifdef SUPPORT_NETBOOT |
| &builtin_rarp, |
| #endif /* SUPPORT_NETBOOT */ |
| &builtin_read, |
| &builtin_reboot, |
| #endif /* ! GRUB_UTIL */ |
| &builtin_root, |
| &builtin_rootnoverify, |
| &builtin_savedefault, |
| #ifdef SUPPORT_SERIAL |
| &builtin_serial, |
| #endif /* SUPPORT_SERIAL */ |
| &builtin_setkey, |
| #ifdef GRUB_UTIL |
| &builtin_setup, |
| #endif /* GRUB_UTIL */ |
| &builtin_setvbe, |
| #ifdef SUPPORT_GRAPHICS |
| &builtin_splashimage, |
| #endif /* SUPPORT_GRAPHICS */ |
| #if defined(SUPPORT_SERIAL) || defined(SUPPORT_HERCULES) || defined(SUPPORT_GRAPHICS) |
| &builtin_terminal, |
| #endif /* SUPPORT_SERIAL || SUPPORT_HERCULES SUPPORT_GRAPHICS */ |
| #ifdef SUPPORT_SERIAL |
| &builtin_terminfo, |
| #endif /* SUPPORT_SERIAL */ |
| // &builtin_testload, |
| &builtin_testvbe, |
| #ifdef SUPPORT_NETBOOT |
| &builtin_tftpserver, |
| #endif /* SUPPORT_NETBOOT */ |
| &builtin_timeout, |
| &builtin_title, |
| #if ! defined(GRUB_UTIL) && ! defined (STAGE1_5) |
| &builtin_tpm, |
| #endif /* ! defined(GRUB_UTIL) && ! defined (STAGE1_5) */ |
| &builtin_unhide, |
| // &builtin_uppermem, |
| &builtin_uuid, |
| &builtin_vbeprobe, |
| #ifndef GRUB_UTIL |
| &builtin_write, |
| #endif /* ! GRUB_UTIL */ |
| 0 |
| }; |