| /* shared.h - definitions used in all GRUB-specific code */ |
| /* |
| * GRUB -- GRand Unified Bootloader |
| * Copyright (C) 1999,2000,2001,2002 Free Software Foundation, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| /* |
| * Generic defines to use anywhere |
| */ |
| |
| #ifndef GRUB_SHARED_HEADER |
| #define GRUB_SHARED_HEADER 1 |
| |
| #include <config.h> |
| |
| /* Add an underscore to a C symbol in assembler code if needed. */ |
| #ifdef HAVE_ASM_USCORE |
| # define EXT_C(sym) _ ## sym |
| #else |
| # define EXT_C(sym) sym |
| #endif |
| |
| /* Maybe redirect memory requests through grub_scratch_mem. */ |
| #ifdef GRUB_UTIL |
| extern char *grub_scratch_mem; |
| # define RAW_ADDR(x) ((x) + (int) grub_scratch_mem) |
| # define RAW_SEG(x) (RAW_ADDR ((x) << 4) >> 4) |
| #else |
| # define RAW_ADDR(x) (x) |
| # define RAW_SEG(x) (x) |
| #endif |
| |
| /* |
| * Integer sizes |
| */ |
| |
| #define MAXINT 0x7FFFFFFF |
| |
| /* Maximum command line size. Before you blindly increase this value, |
| see the comment in char_io.c (get_cmdline). */ |
| #define MAX_CMDLINE 1600 |
| #define NEW_HEAPSIZE 1500 |
| |
| /* 512-byte scratch area */ |
| #define SCRATCHADDR RAW_ADDR (0x77e00) |
| #define SCRATCHSEG RAW_SEG (0x77e0) |
| |
| /* |
| * This is the location of the raw device buffer. It is 31.5K |
| * in size. |
| */ |
| |
| #define BUFFERLEN 0x7e00 |
| #define BUFFERADDR RAW_ADDR (0x70000) |
| #define BUFFERSEG RAW_SEG (0x7000) |
| |
| #define BOOT_PART_TABLE RAW_ADDR (0x07be) |
| |
| /* |
| * BIOS disk defines |
| */ |
| #define BIOSDISK_READ 0x0 |
| #define BIOSDISK_WRITE 0x1 |
| #define BIOSDISK_ERROR_GEOMETRY 0x100 |
| #define BIOSDISK_FLAG_LBA_EXTENSION 0x1 |
| |
| /* |
| * This is the filesystem (not raw device) buffer. |
| * It is 32K in size, do not overrun! |
| */ |
| |
| #define FSYS_BUFLEN 0x8000 |
| #define FSYS_BUF RAW_ADDR (0x68000) |
| |
| /* Command-line buffer for Multiboot kernels and modules. This area |
| includes the area into which Stage 1.5 and Stage 1 are loaded, but |
| that's no problem. */ |
| #define MB_CMDLINE_BUF RAW_ADDR (0x2000) |
| #define MB_CMDLINE_BUFLEN 0x6000 |
| |
| /* The buffer for the password. */ |
| #define PASSWORD_BUF RAW_ADDR (0x78000) |
| #define PASSWORD_BUFLEN 0x200 |
| |
| /* The buffer for the command-line. */ |
| #define CMDLINE_BUF (PASSWORD_BUF + PASSWORD_BUFLEN) |
| #define CMDLINE_BUFLEN MAX_CMDLINE |
| |
| /* The kill buffer for the command-line. */ |
| #define KILL_BUF (CMDLINE_BUF + CMDLINE_BUFLEN) |
| #define KILL_BUFLEN MAX_CMDLINE |
| |
| /* The history buffer for the command-line. */ |
| #define HISTORY_BUF (KILL_BUF + KILL_BUFLEN) |
| #define HISTORY_SIZE 5 |
| #define HISTORY_BUFLEN (MAX_CMDLINE * HISTORY_SIZE) |
| |
| /* The buffer for the completion. */ |
| #define COMPLETION_BUF (HISTORY_BUF + HISTORY_BUFLEN) |
| #define COMPLETION_BUFLEN MAX_CMDLINE |
| |
| /* The buffer for the unique string. */ |
| #define UNIQUE_BUF (COMPLETION_BUF + COMPLETION_BUFLEN) |
| #define UNIQUE_BUFLEN MAX_CMDLINE |
| |
| /* The buffer for the menu entries. */ |
| #define MENU_BUF (UNIQUE_BUF + UNIQUE_BUFLEN) |
| #define MENU_BUFLEN (0x8000 + PASSWORD_BUF - UNIQUE_BUF) |
| |
| /* The size of the drive map. */ |
| #define DRIVE_MAP_SIZE 8 |
| |
| /* The size of the key map. */ |
| #define KEY_MAP_SIZE 128 |
| |
| /* The size of the io map. */ |
| #define IO_MAP_SIZE 128 |
| |
| /* |
| * Linux setup parameters |
| */ |
| |
| #define LINUX_MAGIC_SIGNATURE 0x53726448 /* "HdrS" */ |
| #define LINUX_DEFAULT_SETUP_SECTS 4 |
| #define LINUX_FLAG_CAN_USE_HEAP 0x80 |
| #define LINUX_INITRD_MAX_ADDRESS 0x38000000 |
| #define LINUX_MAX_SETUP_SECTS 63 |
| #define LINUX_BOOT_LOADER_TYPE 0x71 |
| #define LINUX_HEAP_END_OFFSET (0x7F00 - 0x200) |
| |
| #define LINUX_STAGING_AREA RAW_ADDR (0x100000) |
| #define LINUX_SETUP RAW_ADDR (0x90000) |
| #define LINUX_KERNEL RAW_ADDR (0x10000) |
| #define LINUX_KERNEL_MAXLEN 0x7F000 |
| #define LINUX_SETUP_SEG 0x9020 |
| #define LINUX_INIT_SEG 0x9000 |
| #define LINUX_SETUP_STACK 0x7F00 |
| |
| #define LINUX_FLAG_BIG_KERNEL 0x1 |
| |
| /* Linux's video mode selection support. Actually I hate it! */ |
| #define LINUX_VID_MODE_NORMAL 0xFFFF |
| #define LINUX_VID_MODE_EXTENDED 0xFFFE |
| #define LINUX_VID_MODE_ASK 0xFFFD |
| |
| #define CL_MY_LOCATION RAW_ADDR (0x97F00) |
| #define CL_MY_END_ADDR RAW_ADDR (0x97FFF) |
| #define CL_MAGIC 0xA33F |
| #define CL_BASE_ADDR RAW_ADDR (0x90000) |
| |
| /* |
| * General disk stuff |
| */ |
| |
| #define SECTOR_SIZE 0x200 |
| #define SECTOR_BITS 9 |
| #define BIOS_FLAG_FIXED_DISK 0x80 |
| |
| #define BOOTSEC_LOCATION RAW_ADDR (0x7C00) |
| #define BOOTSEC_SIGNATURE 0xAA55 |
| #define BOOTSEC_BPB_OFFSET 0x3 |
| #define BOOTSEC_BPB_LENGTH 0x3B |
| #define BOOTSEC_BPB_SYSTEM_ID 0x3 |
| #define BOOTSEC_BPB_HIDDEN_SECTORS 0x1C |
| #define BOOTSEC_PART_OFFSET 0x1BE |
| #define BOOTSEC_PART_LENGTH 0x40 |
| #define BOOTSEC_SIG_OFFSET 0x1FE |
| #define BOOTSEC_LISTSIZE 8 |
| |
| /* Not bad, perhaps. */ |
| #define NETWORK_DRIVE 0x20 |
| |
| /* |
| * GRUB specific information |
| * (in LSB order) |
| */ |
| |
| #include <stage1.h> |
| |
| #define STAGE2_VER_MAJ_OFFS 0x6 |
| #define STAGE2_INSTALLPART 0x8 |
| #define STAGE2_SAVED_ENTRYNO 0xc |
| #define STAGE2_STAGE2_ID 0x10 |
| #define STAGE2_FORCE_LBA 0x11 |
| #define STAGE2_VER_STR_OFFS 0x12 |
| |
| /* Stage 2 identifiers */ |
| #define STAGE2_ID_STAGE2 0 |
| #define STAGE2_ID_FFS_STAGE1_5 1 |
| #define STAGE2_ID_E2FS_STAGE1_5 2 |
| #define STAGE2_ID_FAT_STAGE1_5 3 |
| #define STAGE2_ID_MINIX_STAGE1_5 4 |
| #define STAGE2_ID_REISERFS_STAGE1_5 5 |
| #define STAGE2_ID_VSTAFS_STAGE1_5 6 |
| #define STAGE2_ID_JFS_STAGE1_5 7 |
| #define STAGE2_ID_XFS_STAGE1_5 8 |
| |
| #ifndef STAGE1_5 |
| # define STAGE2_ID STAGE2_ID_STAGE2 |
| #else |
| # if defined(FSYS_FFS) |
| # define STAGE2_ID STAGE2_ID_FFS_STAGE1_5 |
| # elif defined(FSYS_EXT2FS) |
| # define STAGE2_ID STAGE2_ID_E2FS_STAGE1_5 |
| # elif defined(FSYS_FAT) |
| # define STAGE2_ID STAGE2_ID_FAT_STAGE1_5 |
| # elif defined(FSYS_MINIX) |
| # define STAGE2_ID STAGE2_ID_MINIX_STAGE1_5 |
| # elif defined(FSYS_REISERFS) |
| # define STAGE2_ID STAGE2_ID_REISERFS_STAGE1_5 |
| # elif defined(FSYS_VSTAFS) |
| # define STAGE2_ID STAGE2_ID_VSTAFS_STAGE1_5 |
| # elif defined(FSYS_JFS) |
| # define STAGE2_ID STAGE2_ID_JFS_STAGE1_5 |
| # elif defined(FSYS_XFS) |
| # define STAGE2_ID STAGE2_ID_XFS_STAGE1_5 |
| # else |
| # error "unknown Stage 2" |
| # endif |
| #endif |
| |
| /* |
| * defines for use when switching between real and protected mode |
| */ |
| |
| #define CR0_PE_ON 0x1 |
| #define CR0_PE_OFF 0xfffffffe |
| #define PROT_MODE_CSEG 0x8 |
| #define PROT_MODE_DSEG 0x10 |
| #define PSEUDO_RM_CSEG 0x18 |
| #define PSEUDO_RM_DSEG 0x20 |
| #define STACKOFF (0x2000 - 0x10) |
| #define PROTSTACKINIT (FSYS_BUF - 0x10) |
| |
| |
| /* |
| * Assembly code defines |
| * |
| * "EXT_C" is assumed to be defined in the Makefile by the configure |
| * command. |
| */ |
| |
| #define ENTRY(x) .globl EXT_C(x) ; EXT_C(x): |
| #define VARIABLE(x) ENTRY(x) |
| |
| |
| #define K_RDWR 0x60 /* keyboard data & cmds (read/write) */ |
| #define K_STATUS 0x64 /* keyboard status */ |
| #define K_CMD 0x64 /* keybd ctlr command (write-only) */ |
| |
| #define K_OBUF_FUL 0x01 /* output buffer full */ |
| #define K_IBUF_FUL 0x02 /* input buffer full */ |
| |
| #define KC_CMD_WIN 0xd0 /* read output port */ |
| #define KC_CMD_WOUT 0xd1 /* write output port */ |
| #define KB_OUTPUT_MASK 0xdd /* enable output buffer full interrupt |
| enable data line |
| enable clock line */ |
| #define KB_A20_ENABLE 0x02 |
| |
| /* Codes for getchar. */ |
| #define ASCII_CHAR(x) ((x) & 0xFF) |
| #if !defined(GRUB_UTIL) || !defined(HAVE_LIBCURSES) |
| # define KEY_LEFT 0x4B00 |
| # define KEY_RIGHT 0x4D00 |
| # define KEY_UP 0x4800 |
| # define KEY_DOWN 0x5000 |
| # define KEY_IC 0x5200 /* insert char */ |
| # define KEY_DC 0x5300 /* delete char */ |
| # define KEY_BACKSPACE 0x0008 |
| # define KEY_HOME 0x4700 |
| # define KEY_END 0x4F00 |
| # define KEY_NPAGE 0x4900 |
| # define KEY_PPAGE 0x5100 |
| # define A_NORMAL 0x7 |
| # define A_REVERSE 0x70 |
| #elif defined(HAVE_NCURSES_CURSES_H) |
| # include <ncurses/curses.h> |
| #elif defined(HAVE_NCURSES_H) |
| # include <ncurses.h> |
| #elif defined(HAVE_CURSES_H) |
| # include <curses.h> |
| #endif |
| |
| /* In old BSD curses, A_NORMAL and A_REVERSE are not defined, so we |
| define them here if they are undefined. */ |
| #ifndef A_NORMAL |
| # define A_NORMAL 0 |
| #endif /* ! A_NORMAL */ |
| #ifndef A_REVERSE |
| # ifdef A_STANDOUT |
| # define A_REVERSE A_STANDOUT |
| # else /* ! A_STANDOUT */ |
| # define A_REVERSE 0 |
| # endif /* ! A_STANDOUT */ |
| #endif /* ! A_REVERSE */ |
| |
| /* Define ACS_* ourselves, since the definitions are not consistent among |
| various curses implementations. */ |
| #undef ACS_ULCORNER |
| #undef ACS_URCORNER |
| #undef ACS_LLCORNER |
| #undef ACS_LRCORNER |
| #undef ACS_HLINE |
| #undef ACS_VLINE |
| #undef ACS_LARROW |
| #undef ACS_RARROW |
| #undef ACS_UARROW |
| #undef ACS_DARROW |
| |
| #define ACS_ULCORNER '+' |
| #define ACS_URCORNER '+' |
| #define ACS_LLCORNER '+' |
| #define ACS_LRCORNER '+' |
| #define ACS_HLINE '-' |
| #define ACS_VLINE '|' |
| #define ACS_LARROW '<' |
| #define ACS_RARROW '>' |
| #define ACS_UARROW '^' |
| #define ACS_DARROW 'v' |
| |
| /* Special graphics characters for IBM displays. */ |
| #define DISP_UL 218 |
| #define DISP_UR 191 |
| #define DISP_LL 192 |
| #define DISP_LR 217 |
| #define DISP_HORIZ 196 |
| #define DISP_VERT 179 |
| #define DISP_LEFT 0x1b |
| #define DISP_RIGHT 0x1a |
| #define DISP_UP 0x18 |
| #define DISP_DOWN 0x19 |
| |
| /* Remap some libc-API-compatible function names so that we prevent |
| circularararity. */ |
| #ifndef WITHOUT_LIBC_STUBS |
| #define memmove grub_memmove |
| #define memcpy grub_memmove /* we don't need a separate memcpy */ |
| #define memset grub_memset |
| #define isspace grub_isspace |
| #define printf grub_printf |
| #define sprintf grub_sprintf |
| #undef putchar |
| #define putchar grub_putchar |
| #define strncat grub_strncat |
| #define strstr grub_strstr |
| #define memcmp grub_memcmp |
| #define strcmp grub_strcmp |
| #define tolower grub_tolower |
| #define strlen grub_strlen |
| #define strcpy grub_strcpy |
| #endif /* WITHOUT_LIBC_STUBS */ |
| |
| |
| #ifndef ASM_FILE |
| /* |
| * Below this should be ONLY defines and other constructs for C code. |
| */ |
| |
| /* multiboot stuff */ |
| |
| #include "mb_header.h" |
| #include "mb_info.h" |
| |
| /* For the Linux/i386 boot protocol version 2.02. */ |
| struct linux_kernel_header |
| { |
| char code1[0x0020]; |
| unsigned short cl_magic; /* Magic number 0xA33F */ |
| unsigned short cl_offset; /* The offset of command line */ |
| char code2[0x01F1 - 0x0020 - 2 - 2]; |
| unsigned char setup_sects; /* The size of the setup in sectors */ |
| unsigned short root_flags; /* If the root is mounted readonly */ |
| unsigned short syssize; /* obsolete */ |
| unsigned short swap_dev; /* obsolete */ |
| unsigned short ram_size; /* obsolete */ |
| unsigned short vid_mode; /* Video mode control */ |
| unsigned short root_dev; /* Default root device number */ |
| unsigned short boot_flag; /* 0xAA55 magic number */ |
| unsigned short jump; /* Jump instruction */ |
| unsigned long header; /* Magic signature "HdrS" */ |
| unsigned short version; /* Boot protocol version supported */ |
| unsigned long realmode_swtch; /* Boot loader hook */ |
| unsigned long start_sys; /* Points to kernel version string */ |
| unsigned char type_of_loader; /* Boot loader identifier */ |
| unsigned char loadflags; /* Boot protocol option flags */ |
| unsigned short setup_move_size; /* Move to high memory size */ |
| unsigned long code32_start; /* Boot loader hook */ |
| unsigned long ramdisk_image; /* initrd load address */ |
| unsigned long ramdisk_size; /* initrd size */ |
| unsigned long bootsect_kludge; /* obsolete */ |
| unsigned short heap_end_ptr; /* Free memory after setup end */ |
| unsigned short pad1; /* Unused */ |
| unsigned long cmd_line_ptr; /* Points to the kernel command line */ |
| } __attribute__ ((packed)); |
| |
| /* Memory map address range descriptor used by GET_MMAP_ENTRY. */ |
| struct mmar_desc |
| { |
| unsigned long desc_len; /* Size of this descriptor. */ |
| unsigned long long addr; /* Base address. */ |
| unsigned long long length; /* Length in bytes. */ |
| unsigned long type; /* Type of address range. */ |
| }; |
| |
| /* VBE controller information. */ |
| struct vbe_controller |
| { |
| unsigned char signature[4]; |
| unsigned short version; |
| unsigned long oem_string; |
| unsigned long capabilities; |
| unsigned long video_mode; |
| unsigned short total_memory; |
| unsigned short oem_software_rev; |
| unsigned long oem_vendor_name; |
| unsigned long oem_product_name; |
| unsigned long oem_product_rev; |
| unsigned char reserved[222]; |
| unsigned char oem_data[256]; |
| } __attribute__ ((packed)); |
| |
| /* VBE mode information. */ |
| struct vbe_mode |
| { |
| unsigned short mode_attributes; |
| unsigned char win_a_attributes; |
| unsigned char win_b_attributes; |
| unsigned short win_granularity; |
| unsigned short win_size; |
| unsigned short win_a_segment; |
| unsigned short win_b_segment; |
| unsigned long win_func; |
| unsigned short bytes_per_scanline; |
| |
| /* >=1.2 */ |
| unsigned short x_resolution; |
| unsigned short y_resolution; |
| unsigned char x_char_size; |
| unsigned char y_char_size; |
| unsigned char number_of_planes; |
| unsigned char bits_per_pixel; |
| unsigned char number_of_banks; |
| unsigned char memory_model; |
| unsigned char bank_size; |
| unsigned char number_of_image_pages; |
| unsigned char reserved0; |
| |
| /* direct color */ |
| unsigned char red_mask_size; |
| unsigned char red_field_position; |
| unsigned char green_mask_size; |
| unsigned char green_field_position; |
| unsigned char blue_mask_size; |
| unsigned char blue_field_position; |
| unsigned char reserved_mask_size; |
| unsigned char reserved_field_position; |
| unsigned char direct_color_mode_info; |
| |
| /* >=2.0 */ |
| unsigned long phys_base; |
| unsigned long reserved1; |
| unsigned short reversed2; |
| |
| /* >=3.0 */ |
| unsigned short linear_bytes_per_scanline; |
| unsigned char banked_number_of_image_pages; |
| unsigned char linear_number_of_image_pages; |
| unsigned char linear_red_mask_size; |
| unsigned char linear_red_field_position; |
| unsigned char linear_green_mask_size; |
| unsigned char linear_green_field_position; |
| unsigned char linear_blue_mask_size; |
| unsigned char linear_blue_field_position; |
| unsigned char linear_reserved_mask_size; |
| unsigned char linear_reserved_field_position; |
| unsigned long max_pixel_clock; |
| |
| unsigned char reserved3[189]; |
| } __attribute__ ((packed)); |
| |
| |
| #undef NULL |
| #define NULL ((void *) 0) |
| |
| /* Error codes (descriptions are in common.c) */ |
| typedef enum |
| { |
| ERR_NONE = 0, |
| ERR_BAD_FILENAME, |
| ERR_BAD_FILETYPE, |
| ERR_BAD_GZIP_DATA, |
| ERR_BAD_GZIP_HEADER, |
| ERR_BAD_PART_TABLE, |
| ERR_BAD_VERSION, |
| ERR_BELOW_1MB, |
| ERR_BOOT_COMMAND, |
| ERR_BOOT_FAILURE, |
| ERR_BOOT_FEATURES, |
| ERR_DEV_FORMAT, |
| ERR_DEV_VALUES, |
| ERR_EXEC_FORMAT, |
| ERR_FILELENGTH, |
| ERR_FILE_NOT_FOUND, |
| ERR_FSYS_CORRUPT, |
| ERR_FSYS_MOUNT, |
| ERR_GEOM, |
| ERR_NEED_LX_KERNEL, |
| ERR_NEED_MB_KERNEL, |
| ERR_NO_DISK, |
| ERR_NO_PART, |
| ERR_NUMBER_PARSING, |
| ERR_OUTSIDE_PART, |
| ERR_READ, |
| ERR_SYMLINK_LOOP, |
| ERR_UNRECOGNIZED, |
| ERR_WONT_FIT, |
| ERR_WRITE, |
| ERR_BAD_ARGUMENT, |
| ERR_UNALIGNED, |
| ERR_PRIVILEGED, |
| ERR_DEV_NEED_INIT, |
| ERR_NO_DISK_SPACE, |
| ERR_NUMBER_OVERFLOW, |
| |
| MAX_ERR_NUM |
| } grub_error_t; |
| |
| extern unsigned long install_partition; |
| extern unsigned long boot_drive; |
| extern unsigned long install_second_sector; |
| extern struct apm_info apm_bios_info; |
| extern unsigned long boot_part_addr; |
| extern unsigned long boot_part_offset; |
| extern int saved_entryno; |
| extern unsigned char force_lba; |
| extern char version_string[]; |
| extern char config_file[]; |
| extern unsigned long linux_text_len; |
| |
| #ifdef GRUB_UTIL |
| /* If not using config file, this variable is set to zero, |
| otherwise non-zero. */ |
| extern int use_config_file; |
| /* If using the preset menu, this variable is set to non-zero, |
| otherwise zero. */ |
| extern int use_preset_menu; |
| /* If not using curses, this variable is set to zero, otherwise non-zero. */ |
| extern int use_curses; |
| /* The flag for verbose messages. */ |
| extern int verbose; |
| /* The flag for read-only. */ |
| extern int read_only; |
| /* The number of floppies to be probed. */ |
| extern int floppy_disks; |
| /* The map between BIOS drives and UNIX device file names. */ |
| extern char **device_map; |
| /* The filename which stores the information about a device map. */ |
| extern char *device_map_file; |
| /* The array of geometries. */ |
| extern struct geometry *disks; |
| /* Assign DRIVE to a device name DEVICE. */ |
| extern void assign_device_name (int drive, const char *device); |
| #endif |
| |
| #ifndef STAGE1_5 |
| /* GUI interface variables. */ |
| extern int fallback_entry; |
| extern int default_entry; |
| extern int current_entryno; |
| |
| /* The constants for password types. */ |
| typedef enum |
| { |
| PASSWORD_PLAIN, |
| PASSWORD_MD5, |
| PASSWORD_UNSUPPORTED |
| } |
| password_t; |
| |
| extern char *password; |
| extern password_t password_type; |
| extern int auth; |
| extern char commands[]; |
| |
| /* For `more'-like feature. */ |
| extern int max_lines; |
| extern int count_lines; |
| extern int use_pager; |
| #endif |
| |
| #ifndef NO_DECOMPRESSION |
| extern int no_decompression; |
| extern int compressed_file; |
| #endif |
| |
| /* instrumentation variables */ |
| extern void (*disk_read_hook) (int, int, int); |
| extern void (*disk_read_func) (int, int, int); |
| |
| #ifndef STAGE1_5 |
| /* The flag for debug mode. */ |
| extern int debug; |
| #endif /* STAGE1_5 */ |
| |
| extern unsigned long current_drive; |
| extern unsigned long current_partition; |
| |
| extern int fsys_type; |
| |
| /* The information for a disk geometry. The CHS information is only for |
| DOS/Partition table compatibility, and the real number of sectors is |
| stored in TOTAL_SECTORS. */ |
| struct geometry |
| { |
| /* The number of cylinders */ |
| unsigned long cylinders; |
| /* The number of heads */ |
| unsigned long heads; |
| /* The number of sectors */ |
| unsigned long sectors; |
| /* The total number of sectors */ |
| unsigned long total_sectors; |
| /* Flags */ |
| unsigned long flags; |
| }; |
| |
| extern long part_start; |
| extern long part_length; |
| |
| extern int current_slice; |
| |
| extern int buf_drive; |
| extern int buf_track; |
| extern struct geometry buf_geom; |
| |
| /* these are the current file position and maximum file position */ |
| extern int filepos; |
| extern int filemax; |
| |
| /* |
| * Common BIOS/boot data. |
| */ |
| |
| extern struct multiboot_info mbi; |
| extern unsigned long saved_drive; |
| extern unsigned long saved_partition; |
| #ifndef STAGE1_5 |
| extern unsigned long saved_mem_upper; |
| extern unsigned long extended_memory; |
| #endif |
| |
| /* |
| * Error variables. |
| */ |
| |
| extern grub_error_t errnum; |
| extern char *err_list[]; |
| |
| /* Simplify declaration of entry_addr. */ |
| typedef void (*entry_func) (int, int, int, int, int, int) |
| __attribute__ ((noreturn)); |
| |
| extern entry_func entry_addr; |
| |
| /* Enter the stage1.5/stage2 C code after the stack is set up. */ |
| void cmain (void); |
| |
| /* Halt the processor (called after an unrecoverable error). */ |
| void stop (void) __attribute__ ((noreturn)); |
| |
| /* Reboot the system. */ |
| void grub_reboot (void) __attribute__ ((noreturn)); |
| |
| /* Halt the system, using APM if possible. If NO_APM is true, don't use |
| APM even if it is available. */ |
| void grub_halt (int no_apm) __attribute__ ((noreturn)); |
| |
| /* Copy MAP to the drive map and set up int13_handler. */ |
| void set_int13_handler (unsigned short *map); |
| |
| /* Set up int15_handler. */ |
| void set_int15_handler (void); |
| |
| /* Restore the original int15 handler. */ |
| void unset_int15_handler (void); |
| |
| /* Track the int13 handler to probe I/O address space. */ |
| void track_int13 (int drive); |
| |
| /* The key map. */ |
| extern unsigned short bios_key_map[]; |
| extern unsigned short ascii_key_map[]; |
| extern unsigned short io_map[]; |
| |
| /* calls for direct boot-loader chaining */ |
| void chain_stage1 (unsigned long segment, unsigned long offset, |
| unsigned long part_table_addr) |
| __attribute__ ((noreturn)); |
| void chain_stage2 (unsigned long segment, unsigned long offset, |
| int second_sector) |
| __attribute__ ((noreturn)); |
| |
| /* do some funky stuff, then boot linux */ |
| void linux_boot (void) __attribute__ ((noreturn)); |
| |
| /* do some funky stuff, then boot bzImage linux */ |
| void big_linux_boot (void) __attribute__ ((noreturn)); |
| |
| /* booting a multiboot executable */ |
| void multi_boot (int start, int mb_info) __attribute__ ((noreturn)); |
| |
| /* If LINEAR is nonzero, then set the Intel processor to linear mode. |
| Otherwise, bit 20 of all memory accesses is always forced to zero, |
| causing a wraparound effect for bugwards compatibility with the |
| 8086 CPU. */ |
| void gateA20 (int linear); |
| |
| /* memory probe routines */ |
| int get_memsize (int type); |
| int get_eisamemsize (void); |
| |
| /* Fetch the next entry in the memory map and return the continuation |
| value. DESC is a pointer to the descriptor buffer, and CONT is the |
| previous continuation value (0 to get the first entry in the |
| map). */ |
| int get_mmap_entry (struct mmar_desc *desc, int cont); |
| |
| /* Get the linear address of a ROM configuration table. Return zero, |
| if fails. */ |
| unsigned long get_rom_config_table (void); |
| |
| /* Get APM BIOS information. */ |
| void get_apm_info (void); |
| |
| /* Get VBE controller information. */ |
| int get_vbe_controller_info (struct vbe_controller *controller); |
| |
| /* Get VBE mode information. */ |
| int get_vbe_mode_info (int mode_number, struct vbe_mode *mode); |
| |
| /* Set VBE mode. */ |
| int set_vbe_mode (int mode_number); |
| |
| /* Return the data area immediately following our code. */ |
| int get_code_end (void); |
| |
| /* low-level timing info */ |
| int getrtsecs (void); |
| int currticks (void); |
| |
| /* Clear the screen. */ |
| void cls (void); |
| |
| /* Turn off cursor. */ |
| void nocursor (void); |
| |
| /* Get the current cursor position (where 0,0 is the top left hand |
| corner of the screen). Returns packed values, (RET >> 8) is x, |
| (RET & 0xff) is y. */ |
| int getxy (void); |
| |
| /* Set the cursor position. */ |
| void gotoxy (int x, int y); |
| |
| /* Displays an ASCII character. IBM displays will translate some |
| characters to special graphical ones (see the DISP_* constants). */ |
| void grub_putchar (int c); |
| |
| /* Wait for a keypress, and return its packed BIOS/ASCII key code. |
| Use ASCII_CHAR(ret) to extract the ASCII code. */ |
| int getkey (void); |
| |
| /* Like GETKEY, but doesn't block, and returns -1 if no keystroke is |
| available. */ |
| int checkkey (void); |
| |
| /* Low-level disk I/O */ |
| int get_diskinfo (int drive, struct geometry *geometry); |
| int biosdisk (int subfunc, int drive, struct geometry *geometry, |
| int sector, int nsec, int segment); |
| void stop_floppy (void); |
| |
| /* Command-line interface functions. */ |
| #ifndef STAGE1_5 |
| |
| /* The flags for the builtins. */ |
| #define BUILTIN_CMDLINE 0x1 /* Run in the command-line. */ |
| #define BUILTIN_MENU 0x2 /* Run in the menu. */ |
| #define BUILTIN_TITLE 0x4 /* Only for the command title. */ |
| #define BUILTIN_SCRIPT 0x8 /* Run in the script. */ |
| #define BUILTIN_NO_ECHO 0x10 /* Don't print command on booting. */ |
| #define BUILTIN_HELP_LIST 0x20 /* Show help in listing. */ |
| |
| /* The table for a builtin. */ |
| struct builtin |
| { |
| /* The command name. */ |
| char *name; |
| /* The callback function. */ |
| int (*func) (char *, int); |
| /* The combination of the flags defined above. */ |
| int flags; |
| /* The short version of the documentation. */ |
| char *short_doc; |
| /* The long version of the documentation. */ |
| char *long_doc; |
| }; |
| |
| /* All the builtins are registered in this. */ |
| extern struct builtin *builtin_table[]; |
| |
| /* The constants for kernel types. */ |
| typedef enum |
| { |
| KERNEL_TYPE_NONE, /* None is loaded. */ |
| KERNEL_TYPE_MULTIBOOT, /* Multiboot. */ |
| KERNEL_TYPE_LINUX, /* Linux. */ |
| KERNEL_TYPE_BIG_LINUX, /* Big Linux. */ |
| KERNEL_TYPE_FREEBSD, /* FreeBSD. */ |
| KERNEL_TYPE_NETBSD, /* NetBSD. */ |
| KERNEL_TYPE_CHAINLOADER /* Chainloader. */ |
| } |
| kernel_t; |
| |
| extern kernel_t kernel_type; |
| extern int show_menu; |
| extern int grub_timeout; |
| |
| void init_builtins (void); |
| void init_config (void); |
| char *skip_to (int after_equal, char *cmdline); |
| struct builtin *find_command (char *command); |
| void print_cmdline_message (int forever); |
| void enter_cmdline (char *heap, int forever); |
| int run_script (char *script, char *heap); |
| #endif |
| |
| /* C library replacement functions with identical semantics. */ |
| void grub_printf (const char *format,...); |
| int grub_sprintf (char *buffer, const char *format, ...); |
| int grub_tolower (int c); |
| int grub_isspace (int c); |
| int grub_strncat (char *s1, const char *s2, int n); |
| void *grub_memmove (void *to, const void *from, int len); |
| void *grub_memset (void *start, int c, int len); |
| int grub_strncat (char *s1, const char *s2, int n); |
| char *grub_strstr (const char *s1, const char *s2); |
| int grub_memcmp (const char *s1, const char *s2, int n); |
| int grub_strcmp (const char *s1, const char *s2); |
| int grub_strlen (const char *str); |
| char *grub_strcpy (char *dest, const char *src); |
| |
| #ifndef GRUB_UTIL |
| typedef unsigned long grub_jmp_buf[6]; |
| #else |
| /* In the grub shell, use the libc jmp_buf instead. */ |
| # include <setjmp.h> |
| # define grub_jmp_buf jmp_buf |
| #endif |
| |
| #ifdef GRUB_UTIL |
| # define grub_setjmp setjmp |
| # define grub_longjmp longjmp |
| #else /* ! GRUB_UTIL */ |
| int grub_setjmp (grub_jmp_buf env); |
| void grub_longjmp (grub_jmp_buf env, int val); |
| #endif /* ! GRUB_UTIL */ |
| |
| /* The environment for restarting Stage 2. */ |
| extern grub_jmp_buf restart_env; |
| /* The environment for restarting the command-line interface. */ |
| extern grub_jmp_buf restart_cmdline_env; |
| |
| /* misc */ |
| void init_page (void); |
| void print_error (void); |
| char *convert_to_ascii (char *buf, int c, ...); |
| int get_cmdline (char *prompt, char *cmdline, int maxlen, |
| int echo_char, int history); |
| int substring (char *s1, char *s2); |
| int nul_terminate (char *str); |
| int get_based_digit (int c, int base); |
| int safe_parse_maxint (char **str_ptr, int *myint_ptr); |
| int memcheck (int start, int len); |
| |
| #ifndef NO_DECOMPRESSION |
| /* Compression support. */ |
| int gunzip_test_header (void); |
| int gunzip_read (char *buf, int len); |
| #endif /* NO_DECOMPRESSION */ |
| |
| int rawread (int drive, int sector, int byte_offset, int byte_len, char *buf); |
| int devread (int sector, int byte_offset, int byte_len, char *buf); |
| int rawwrite (int drive, int sector, char *buf); |
| int devwrite (int sector, int sector_len, char *buf); |
| |
| /* Parse a device string and initialize the global parameters. */ |
| char *set_device (char *device); |
| int open_device (void); |
| int real_open_partition (int flags); |
| int open_partition (void); |
| int next_partition (unsigned long drive, unsigned long dest, |
| unsigned long *partition, int *type, |
| unsigned long *start, unsigned long *len, |
| unsigned long *offset, int *entry, |
| unsigned long *ext_offset, char *buf); |
| |
| /* Sets device to the one represented by the SAVED_* parameters. */ |
| int make_saved_active (void); |
| |
| /* Set or clear the current root partition's hidden flag. */ |
| int set_partition_hidden_flag (int hidden); |
| |
| /* Open a file or directory on the active device, using GRUB's |
| internal filesystem support. */ |
| int grub_open (char *filename); |
| |
| /* Read LEN bytes into BUF from the file that was opened with |
| GRUB_OPEN. If LEN is -1, read all the remaining data in the file. */ |
| int grub_read (char *buf, int len); |
| |
| /* Reposition a file offset. */ |
| int grub_seek (int offset); |
| |
| /* Close a file. */ |
| void grub_close (void); |
| |
| /* List the contents of the directory that was opened with GRUB_OPEN, |
| printing all completions. */ |
| int dir (char *dirname); |
| |
| int set_bootdev (int hdbias); |
| |
| /* Display statistics on the current active device. */ |
| void print_fsys_type (void); |
| |
| /* Display device and filename completions. */ |
| void print_a_completion (char *filename); |
| int print_completions (int is_filename, int is_completion); |
| |
| /* Copies the current partition data to the desired address. */ |
| void copy_current_part_entry (char *buf); |
| |
| #ifndef STAGE1_5 |
| void bsd_boot (kernel_t type, int bootdev, char *arg) |
| __attribute__ ((noreturn)); |
| |
| /* Define flags for load_image here. */ |
| /* Don't pass a Linux's mem option automatically. */ |
| #define KERNEL_LOAD_NO_MEM_OPTION (1 << 0) |
| |
| kernel_t load_image (char *kernel, char *arg, kernel_t suggested_type, |
| unsigned long load_flags); |
| |
| int load_module (char *module, char *arg); |
| int load_initrd (char *initrd); |
| |
| int check_password(char *entered, char* expected, password_t type); |
| #endif |
| |
| void init_bios_info (void); |
| |
| #endif /* ASM_FILE */ |
| |
| #endif /* ! GRUB_SHARED_HEADER */ |