blob: 1adae25829cc8e8b26c42a651a9c905db4f3f743 [file] [log] [blame] [raw]
/* common.c - miscellaneous shared variables and routines */
/*
* GRUB -- GRand Unified Bootloader
* Copyright (C) 1999,2000,2001,2002,2004 Free Software Foundation, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <shared.h>
#include <iso9660.h>
#include "pxe.h"
#ifdef SUPPORT_NETBOOT
#include <grub.h>
#include <bootp.h>
#endif
/*
* Shared BIOS/boot data.
*/
struct multiboot_info mbi;
#ifdef GRUB_UTIL
unsigned long saved_drive;
unsigned long saved_partition;
#endif
char saved_dir[256];
//unsigned long cdrom_drives[8] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
unsigned long cdrom_drive = GRUB_INVALID_DRIVE;
unsigned long force_cdrom_as_boot_device = 1;
unsigned long ram_drive;
unsigned long rd_base = 0; /* Note the rd_base value of -1 invalidates the ram drive. */
unsigned long rd_size = 0; /* The rd_size 0 stands for 4GB, not for length of 0. */
#ifdef GRUB_UTIL
unsigned long saved_mem_upper;
#endif
unsigned long saved_mem_lower;
unsigned long saved_mmap_addr;
unsigned long saved_mmap_length;
#ifndef STAGE1_5
#ifdef SOLARIS_NETBOOT
unsigned long dhcpack_length;
unsigned long dhcpack_buf;
#endif /* SOLARIS_NETBOOT */
/* This saves the maximum size of extended memory (in KB). */
unsigned long extended_memory;
unsigned long init_free_mem_start;
#endif
int is64bit = 0;
int errorcheck = 1;
/*
* Error code stuff.
*/
grub_error_t errnum = ERR_NONE;
#ifndef STAGE1_5
char *err_list[] =
{
[ERR_NONE] = 0,
[ERR_BAD_ARGUMENT] = "Invalid argument",
[ERR_BAD_FILENAME] = "Filename must be either an absolute pathname or blocklist",
[ERR_BAD_FILETYPE] = "Bad file or directory type",
[ERR_BAD_GZIP_DATA] = "Bad or corrupt data while decompressing file",
[ERR_BAD_GZIP_HEADER] = "Bad or incompatible header in compressed file",
[ERR_BAD_PART_TABLE] = "Partition table invalid or corrupt",
[ERR_BAD_VERSION] = "Mismatched or corrupt version of stage1/stage2",
[ERR_BELOW_1MB] = "Loading below 1MB is not supported",
[ERR_BOOT_COMMAND] = "Kernel must be loaded before booting",
[ERR_BOOT_FAILURE] = "Unknown boot failure",
[ERR_BOOT_FEATURES] = "Unsupported Multiboot features requested",
[ERR_DEV_FORMAT] = "Unrecognized device string, or you omitted the required DEVICE part which should lead the filename.",
[ERR_DEV_NEED_INIT] = "Device not initialized yet",
[ERR_DEV_VALUES] = "Invalid device requested",
[ERR_EXEC_FORMAT] = "Invalid or unsupported executable format",
[ERR_FILELENGTH] = "Filesystem compatibility error, cannot read whole file",
[ERR_FILENAME_FORMAT] = "The leading DEVICE of the filename to find must be stripped off,\n\tand DIR for set-root must begin in a slash(/).",
[ERR_FILE_NOT_FOUND] = "File not found",
[ERR_FSYS_CORRUPT] = "Inconsistent filesystem structure",
[ERR_FSYS_MOUNT] = "Cannot mount selected partition",
[ERR_GEOM] = "Selected cylinder exceeds maximum supported by BIOS",
[ERR_HD_VOL_START_0] = "The BPB hidden_sectors should not be zero for a hard-disk partition boot sector",
[ERR_IN_SITU_FLOPPY] = "Only hard drives could be mapped in situ.",
[ERR_IN_SITU_MEM] = "Should not use --mem together with --in-situ.",
[ERR_NEED_LX_KERNEL] = "Linux kernel must be loaded before initrd",
[ERR_NEED_MB_KERNEL] = "Multiboot kernel must be loaded before modules",
[ERR_NO_DISK] = "Selected disk does not exist",
[ERR_NO_DISK_SPACE] = "No spare sectors on the disk",
[ERR_NO_PART] = "No such partition",
[ERR_NO_HEADS] = "The number of heads must be specified. The `--heads=0' option tells map to choose a value(but maybe unsuitable) for you",
[ERR_NO_SECTORS] = "The number of sectors per track must be specified. The `--sectors-per-track=0' option tells map to choose a value(but maybe unsuitable) for you",
[ERR_NON_CONTIGUOUS] = "File for drive emulation must be in one contiguous disk area",
[ERR_NUMBER_OVERFLOW] = "Overflow while parsing number",
[ERR_NUMBER_PARSING] = "Error while parsing number",
[ERR_OUTSIDE_PART] = "Attempt to access block outside partition",
[ERR_PRIVILEGED] = "Must be authenticated",
[ERR_READ] = "Disk read error",
[ERR_SYMLINK_LOOP] = "Too many symbolic links",
[ERR_UNALIGNED] = "File is not sector aligned",
[ERR_UNRECOGNIZED] = "Unrecognized command",
[ERR_WONT_FIT] = "Selected item cannot fit into memory",
[ERR_WRITE] = "Disk write error",
[ERR_INT13_ON_HOOK] = "The int13 handler already on hook",
[ERR_INT13_OFF_HOOK] = "The int13 handler not yet on hook",
[ERR_NO_DRIVE_MAPPED] = "Refuse to hook int13 because of empty drive map table",
[ERR_INVALID_HEADS] = "Invalid heads. Should be between 0 and 256(0 means auto)",
[ERR_INVALID_SECTORS] = "Invalid sectors. Should be between 0 and 63(0 means auto)",
[ERR_SPECIFY_GEOM] = "Should not specify geometry when mapping a whole drive or when emulating a hard disk with a logical partition",
[ERR_EXTENDED_PARTITION] = "Extended partition table is invalid, or its CHS values conflict with the BPB in a logical partition",
[ERR_DEL_MEM_DRIVE] = "You should delete other mem drive first, or use `--mem' option to force the deletion",
[ERR_SPECIFY_MEM] = "Should not specify `--mem' when mapping a whole drive",
[ERR_SPECIFY_RESTRICTION] = "Options --read-only, --fake-write and --unsafe-boot are mutually exclusive. Should not specify them repeatedly.",
[ERR_INVALID_FLOPPIES] = "Invalid floppies. Should be between 0 and 2",
[ERR_INVALID_HARDDRIVES] = "Invalid harddrives. Should be between 0 and 127",
[ERR_INVALID_LOAD_SEGMENT] = "Invalid load segment. Should be between 0 and 0x9FFF",
[ERR_INVALID_LOAD_OFFSET] = "Invalid load offset. Should be between 0 and 0xFFFF",
[ERR_INVALID_LOAD_LENGTH] = "Invalid load length. Should be between 512 and 0xA0000",
[ERR_INVALID_SKIP_LENGTH] = "Invalid skip length. Should be non-negative and less than the file size",
[ERR_INVALID_BOOT_CS] = "Invalid boot CS. Should be between 0 and 0xFFFF",
[ERR_INVALID_BOOT_IP] = "Invalid boot IP. Should be between 0 and 0xFFFF",
[ERR_INVALID_RAM_DRIVE] = "Invalid ram_drive. Should be between 0 and 254",
// [ERR_INVALID_RD_BASE] = "Invalid rd_base. Should not be 0xffffffff",
// [ERR_INVALID_RD_SIZE] = "Invalid rd_size. Should not be 0",
[ERR_MD_BASE] = "When mapping whole mem device at a fixed location, you must specify --mem to a value > 0.",
[ERR_RD_BASE] = "RD_BASE must be sector-aligned and non-zero for mapping at a fixed location",
[ERR_DOS_BACKUP] = "GRUB was not booted from DOS, or the backup copy of DOS at physical\naddress 0x200000 is corrupt",
[ERR_ENABLE_A20] = "Failed to turn on Gate A20!",
[ERR_DISABLE_A20] = "Failed to turn off Gate A20!",
[ERR_DEFAULT_FILE] = "Invalid DEFAULT file format. Please copy a valid DEFAULT file from the grub4dos release and try again. Also note that the DEFAULT file must be uncompressed.",
[ERR_PARTITION_TABLE_FULL] = "Cannot use --in-situ because the partition table is full(i.e., all the 4 entries are in use).",
[ERR_MD5_FORMAT] = "Unrecognized md5 string. You must create it using the MD5CRYPT command.",
[ERR_WRITE_GZIP_FILE] = "Attempt to write a gzip file",
[ERR_FUNC_CALL] = "Invalid function call",
// [ERR_WRITE_TO_NON_MEM_DRIVE] = "Only RAM drives can be written when running in a script",
[ERR_BAD_GZIP_CRC] = "Incorrect gunzip CRC checksum",
[ERR_FILESYSTEM_NOT_FOUND] = "File System not found",
/* this zfs file system is not found in the pool of the device */
[ERR_NO_BOOTPATH] = "No valid boot path found in the zfs label. This may be caused by attempting to boot from an off-lined device.",
[ERR_NEWER_VERSION] = "Newer on-disk pool version",
[ERR_NOTXPM] = "Image not in XPM graphics format",
[ERR_TOOMANYCOLORS] = "Image cannot use more than 14 colors",
[ERR_CORRUPTXPM] = "File contains corrupt XPM image data"
};
/* static for BIOS memory map fakery */
static struct AddrRangeDesc fakemap[3] =
{
{20, 0, 0, MB_ARD_MEMORY},
{20, 0x100000, 0, MB_ARD_MEMORY},
{20, 0x1000000, 0, MB_ARD_MEMORY}
};
/* A big problem is that the memory areas aren't guaranteed to be:
(1) contiguous, (2) sorted in ascending order, or (3) non-overlapping.
Thus this kludge. */
static unsigned long
mmap_avail_at (unsigned long bottom)
{
unsigned long long top;
unsigned long addr;
int cont;
top = bottom;
do
{
for (cont = 0, addr = saved_mmap_addr;
addr < saved_mmap_addr + saved_mmap_length;
addr += *((unsigned long *) addr) + 4)
{
struct AddrRangeDesc *desc = (struct AddrRangeDesc *) addr;
if (desc->Type == MB_ARD_MEMORY
&& desc->BaseAddr <= top
&& desc->BaseAddr + desc->Length > top)
{
top = desc->BaseAddr + desc->Length;
cont++;
}
}
}
while (cont);
/* For now, GRUB assumes 32bits addresses, so... */
if (top > 0xFFFFFFFF)
top = 0xFFFFFFFF;
return (unsigned long) top - bottom;
}
#endif /* ! STAGE1_5 */
/* This queries for BIOS information. */
void
init_bios_info (void)
{
#ifndef STAGE1_5
unsigned long cont, memtmp, addr;
int drive;
#endif
#ifndef GRUB_UTIL
#ifndef STAGE1_5
unsigned long force_pxe_as_boot_device;
#endif /* ! STAGE1_5 */
#endif /* ! GRUB_UTIL */
/*
* Get information from BIOS on installed RAM.
*/
#ifndef STAGE1_5
DEBUG_SLEEP
printf("\rGet lower memory... ");
#endif
saved_mem_lower = get_memsize (0); /* int12 --------safe enough */
#ifndef STAGE1_5
printf("\rGet upper memory... ");
#endif
saved_mem_upper = get_memsize (1); /* int15/88 -----safe enough */
#ifndef STAGE1_5
/*
* We need to call this somewhere before trying to put data
* above 1 MB, since without calling it, address line 20 will be wired
* to 0. Not too desirable.
*/
#ifndef GRUB_UTIL
debug = debug_boot + 1;
DEBUG_SLEEP
printf("\rTurning on gate A20... ");
#if 1
{
unsigned long j;
int wait;
int time1;
int time2;
if (gateA20 (1)) /* int15/24 -----safe enough */
{
/* wipe out the messages on success */
printf("\r \r");
wait = 0; /* sleep 0 second after A20 control */
} else {
printf("Failure! Report bug, please!\n");
wait = 5; /* sleep 5 second on failure */
}
/* Get current time. */
while ((time2 = getrtsecs ()) == 0xFF);
for (j = 0; j < 0x00800000; j++)
{
if ((time1 = getrtsecs ()) != time2 && time1 != 0xFF)
{
if (wait == 0)
break;
time2 = time1;
wait--;
}
}
}
#else
extern void grub2_gate_a20 (int on);
grub2_gate_a20 (1);
printf("\r \r"); /* wipe out the messages */
#endif
DEBUG_SLEEP
#endif
/* Store the size of extended memory in EXTENDED_MEMORY, in order to
tell it to non-Multiboot OSes. */
extended_memory = saved_mem_upper;
/*
* The MBI.MEM_UPPER variable only recognizes upper memory in the
* first memory region. If there are multiple memory regions,
* the rest are reported to a Multiboot-compliant OS, but otherwise
* unused by GRUB.
*/
addr = get_code_end ();
saved_mmap_addr = addr;
saved_mmap_length = 0;
cont = 0;
printf("\rGet E820 memory... ");
do
{
cont = get_mmap_entry ((void *) addr, cont); /* int15/e820 ------ will write memory! */
/* If the returned buffer's length is zero, quit. */
if (! *((unsigned long *) addr))
break;
saved_mmap_length += *((unsigned long *) addr) + 4;
addr += *((unsigned long *) addr) + 4;
}
while (cont);
if (! (saved_mmap_length))
printf("\rGet E801 memory... ");
if (saved_mmap_length)
{
unsigned long long max_addr;
/*
* This is to get the lower memory, and upper memory (up to the
* first memory hole), into the MBI.MEM_{LOWER,UPPER}
* elements. This is for OS's that don't care about the memory
* map, but might care about total RAM available.
*/
saved_mem_lower = mmap_avail_at (0) >> 10;
saved_mem_upper = mmap_avail_at (0x100000) >> 10;
/* Find the maximum available address. Ignore any memory holes. */
for (max_addr = 0, addr = saved_mmap_addr;
addr < saved_mmap_addr + saved_mmap_length;
addr += *((unsigned long *) addr) + 4)
{
struct AddrRangeDesc *desc = (struct AddrRangeDesc *) addr;
if (desc->Type == MB_ARD_MEMORY && desc->Length > 0
&& desc->BaseAddr + desc->Length > max_addr)
max_addr = desc->BaseAddr + desc->Length;
}
extended_memory = (max_addr - 0x100000) >> 10;
}
else if ((memtmp = get_eisamemsize ()) != -1) /* int15/e801 ------safe enough */
{
cont = memtmp & ~0xFFFF;
memtmp = memtmp & 0xFFFF;
if (cont != 0)
extended_memory = (cont >> 10) + 0x3c00;
else
extended_memory = memtmp;
saved_mem_upper = memtmp;
if (!cont || (memtmp == 0x3c00))
{
saved_mem_upper += (cont >> 10);
// /* XXX should I do this at all ??? */
//
// saved_mmap_addr = (unsigned long) fakemap;
// saved_mmap_length = sizeof (struct AddrRangeDesc) * 2;
// fakemap[0].Length = (saved_mem_lower << 10);
// fakemap[1].Length = (saved_mem_upper << 10);
// fakemap[2].Length = 0;
}
//else
{
/* XXX should I do this at all ??? */
saved_mmap_addr = (unsigned long) fakemap;
saved_mmap_length = sizeof (fakemap);
fakemap[0].Length = (saved_mem_lower << 10);
fakemap[1].Length = (memtmp << 10);
fakemap[2].Length = cont;
}
}
printf("\r \r"); /* wipe out the messages */
mbi.mem_upper = saved_mem_upper;
mbi.mem_lower = saved_mem_lower;
mbi.mmap_addr = saved_mmap_addr;
mbi.mmap_length = saved_mmap_length;
#ifdef SUPPORT_NETBOOT
#ifdef SOLARIS_NETBOOT
/* leave room for dhcpack_buf */
dhcpack_buf = addr;
addr += sizeof (struct dhcp_t);
#endif
#endif
grub_putstr("Welcome to GRUB4DOS\n");
#ifndef GRUB_UTIL
is64bit = check_64bit ();
#endif
#if 1
/* Get the drive info. */
/* FIXME: This should be postponed until a Multiboot kernel actually
requires it, because this could slow down the start-up
unreasonably. */
mbi.drives_length = 0;
mbi.drives_addr = addr;
/* For now, GRUB doesn't probe floppies, since it is trivial to map
floppy drives to BIOS drives. */
#ifdef GRUB_UTIL
#define FIND_DRIVES 8
#else
#define FIND_DRIVES (*((char *)0x475))
#endif
if (debug > 1)
grub_printf ("hard drives: %d, int13: %X, int15: %X\n", FIND_DRIVES, *(unsigned long *)0x4C, *(unsigned long *)0x54);
DEBUG_SLEEP
for (drive = 0x80; drive < 0x80 + FIND_DRIVES; drive++)
{
struct drive_info *info = (struct drive_info *) addr;
// unsigned short *port;
/* Get the geometry. This ensures that the drive is present. */
if (debug > 1)
grub_printf ("get_diskinfo(%X), ", drive);
if (get_diskinfo (drive, &tmp_geom))
continue;//break;
if (debug > 1)
grub_printf (" %sC/H/S=%d/%d/%d, Sector Count/Size=%d/%d\n",
(tmp_geom.flags & BIOSDISK_FLAG_LBA_EXTENSION) ? "LBA, " : "",
tmp_geom.cylinders, tmp_geom.heads, tmp_geom.sectors,
tmp_geom.total_sectors, tmp_geom.sector_size);
/* Set the information. */
info->drive_number = drive;
info->drive_mode = ((tmp_geom.flags & BIOSDISK_FLAG_LBA_EXTENSION)
? MB_DI_LBA_MODE : MB_DI_CHS_MODE);
info->drive_cylinders = tmp_geom.cylinders;
info->drive_heads = tmp_geom.heads;
info->drive_sectors = tmp_geom.sectors;
addr += sizeof (struct drive_info);
info->size = addr - (unsigned long) info;
mbi.drives_length += info->size;
}
init_free_mem_start = addr;
DEBUG_SLEEP
#endif
/*
* Initialize other Multiboot Info flags.
*/
mbi.flags = (MB_INFO_MEMORY | MB_INFO_CMDLINE | MB_INFO_BOOTDEV | MB_INFO_DRIVE_INFO | MB_INFO_CONFIG_TABLE | MB_INFO_BOOT_LOADER_NAME);
if (saved_mmap_length)
mbi.flags |= MB_INFO_MEM_MAP;
#endif /* STAGE1_5 */
#ifndef GRUB_UTIL
#ifndef STAGE1_5
#ifdef FSYS_PXE
force_pxe_as_boot_device = 0;
if (! ((*(char *)0x8205) & 0x01)) /* if it is not disable pxe */
{
//pxe_detect();
if (! pxe_entry)
{
PXENV_GET_CACHED_INFO_t get_cached_info;
printf("\rbegin pxe scan... ");
pxe_scan ();
DEBUG_SLEEP
if (pxe_entry)
{
pxe_basemem = *((unsigned short*)0x413);
get_cached_info.PacketType = PXENV_PACKET_TYPE_DHCP_ACK;
get_cached_info.Buffer = get_cached_info.BufferSize = 0;
printf("\rbegin pxe call(type=DHCP_ACK)... ");
pxe_call (PXENV_GET_CACHED_INFO, &get_cached_info);
DEBUG_SLEEP
if (get_cached_info.Status)
{
grub_printf ("\nFatal: DHCP_ACK failure!\n");
goto pxe_init_fail;
}
discover_reply = LINEAR(get_cached_info.Buffer);
pxe_yip = discover_reply->yip;
pxe_sip = discover_reply->sip;
pxe_gip = discover_reply->gip;
pxe_mac_type = discover_reply->Hardware;
pxe_mac_len = discover_reply->Hardlen;
grub_memmove (&pxe_mac, &discover_reply->CAddr, pxe_mac_len);
get_cached_info.PacketType = PXENV_PACKET_TYPE_CACHED_REPLY;
get_cached_info.Buffer = get_cached_info.BufferSize = 0;
printf("\rbegin pxe call(type=CACHED_REPLY)... ");
pxe_call (PXENV_GET_CACHED_INFO, &get_cached_info);
DEBUG_SLEEP
if (get_cached_info.Status)
{
grub_printf ("\nFatal: CACHED_REPLY failure!\n");
pxe_init_fail:
pxe_keep = 0;
pxe_unload ();
DEBUG_SLEEP
pxe_entry = 0;
discover_reply = 0;
goto pxe_init_done;
}
discover_reply = LINEAR(get_cached_info.Buffer);
/* on pxe boot, we only use preset_menu */
if (preset_menu != (char*)0x800)
preset_menu = (char*)0x800;
if (*config_file)
*config_file = 0;
force_pxe_as_boot_device = 1;
if (bios_id != 1) /* if it is not Bochs ... */
goto set_root;; /* ... skip cdrom check. */
}
}
}
pxe_init_done:
grub_putstr("\r \r");
#endif /* FSYS_PXE */
#endif /* ! STAGE1_5 */
#endif /* ! GRUB_UTIL */
#if !defined(STAGE1_5) && !defined(GRUB_UTIL)
/* Set cdrom drive. */
/* Get the geometry. */
if (debug > 1)
printf("\rboot drive=%X, ", boot_drive);
cdrom_drive = get_cdinfo (boot_drive, &tmp_geom);
if (! cdrom_drive || cdrom_drive != boot_drive)
cdrom_drive = GRUB_INVALID_DRIVE;
if (cdrom_drive == GRUB_INVALID_DRIVE)
{
/* read the first sector of the drive */
if (((unsigned char)boot_drive) >= 0x80 + FIND_DRIVES)
{
struct disk_address_packet
{
unsigned char length;
unsigned char reserved;
unsigned short blocks;
unsigned long buffer;
unsigned long long block;
unsigned char dummy[16];
} __attribute__ ((packed)) *dap;
dap = (struct disk_address_packet *)0x580;
dap->length = 0x10;
dap->reserved = 0;
dap->blocks = 1;
dap->buffer = 0x5F80/*SCRATCHSEG*/ << 16;
dap->block = 0;
/* set a known value */
grub_memset ((char *)0x5F800, 0xEC, 0x800);
biosdisk_int13_extensions (0x4200, (unsigned char)boot_drive, dap);
/* see if it is a big sector */
{
char *p;
for (p = (char *)0x5FA00; p < (char *)0x60000; p++)
{
if ((*p) != (char)0xEC)
{
cdrom_drive = boot_drive;
break;
}
}
}
} /* if (geometry->flags & BIOSDISK_FLAG_LBA_EXTENSION) */
}
if (debug > 1)
printf("%s\n", cdrom_drive == GRUB_INVALID_DRIVE ? "Not CD":"Is CD");
DEBUG_SLEEP
#endif
#if !defined(STAGE1_5) && !defined(GRUB_UTIL)
if (cdrom_drive == GRUB_INVALID_DRIVE)
{
int err;
int version;
struct drive_parameters *drp = (struct drive_parameters *)0x600;
#undef FIND_DRIVES
#ifdef GRUB_UTIL
#define FIND_DRIVES 8
#else
#define FIND_DRIVES (*((char *)0x475))
#endif
for (drive = 0xFF; drive >= 0x7F; drive--)
{
if (drive >= 0x80 && drive < 0x80 + FIND_DRIVES)
continue;
/* Get the geometry. */
if (debug > 1)
grub_printf ("\rget_cdinfo(%X),", drive);
cdrom_drive = get_cdinfo (drive, &tmp_geom);
if (cdrom_drive)
{
if (drive != 0x7F)
break;
drive = cdrom_drive;
cdrom_drive = get_cdinfo (drive, &tmp_geom);
if (cdrom_drive == drive)
break;
drive = 0x7F;
}
cdrom_drive = GRUB_INVALID_DRIVE;
/* Some buggy BIOSes will hang at EBIOS `Get Drive Parameters' call
* (INT 13h function 48h). So we only do further checks for Bochs.
*/
if (bios_id != 1) /* if it is not Bochs ... */
continue; /* ... skip and try next drive. */
/* When qemu has a cdrom attached but not booted from cdrom, its
* `get bootable cdrom status call', the int13/ax=4B01, returns CF=0
* but with a wrong `Bootable CD-ROM Specification Packet' as follows:
*
* The first byte(packet size) is 0x13, all the rest bytes are 0's.
*
* So we need to call get_diskinfo() here as a workaround.
*
* (The bug was reported by Jacopo Lazzari. Thanks!)
*/
if (drive >= 0x80)
{
version = check_int13_extensions (drive);
if (! (version & 1)) /* not support functions 42h-44h, 47h-48h */
continue; /* failure, try next drive. */
/* It is safe to clear out DRP. */
grub_memset (drp, 0, sizeof (struct drive_parameters));
drp->size = sizeof (struct drive_parameters) - 16;
err = biosdisk_int13_extensions (0x4800, drive, drp);
if (! err && drp->bytes_per_sector == ISO_SECTOR_SIZE)
{
/* Assume it is CDROM. */
cdrom_drive = drive;
break;
}
} /* if (drive >= 0x80) */
} /* for (drive = 0x7F; drive < 0xff; drive++) */
} /* if (cdrom_drive == GRUB_INVALID_DRIVE) */
#undef FIND_DRIVES
// if (cdrom_drive != GRUB_INVALID_DRIVE)
// {
// /* skip pxe init if booting from cdrom */
// *(char *)0x8205 |= 0x01;
// }
if (debug > 1)
grub_printf(" cdrom_drive == %X.\n", cdrom_drive);
DEBUG_SLEEP
#endif /* ! STAGE1_5 && ! GRUB_UTIL */
/* check if the no-emulation-mode bootable cdrom exists. */
/* if cdrom_drive is active, we assume it is the boot device */
if (saved_entryno == 0 && force_cdrom_as_boot_device)
force_cdrom_as_boot_device = 0;
if (cdrom_drive != GRUB_INVALID_DRIVE && force_cdrom_as_boot_device)
{
boot_drive = cdrom_drive; /* force it to be the boot drive */
}
if (boot_drive == cdrom_drive)
/* force it to be "whole drive" without partition table */
install_partition = 0xFFFFFF;
#ifndef GRUB_UTIL
#ifndef STAGE1_5
set_root:
if (force_pxe_as_boot_device)
{
boot_drive = PXE_DRIVE;
install_partition = 0xFFFFFF;
}
#endif /* ! STAGE1_5 */
#endif /* ! GRUB_UTIL */
/* Set root drive and partition. */
saved_drive = boot_drive;
saved_partition = install_partition;
#ifndef GRUB_UTIL
#ifndef STAGE1_5
debug = 1;
if (! atapi_dev_count)
min_cdrom_id = (cdrom_drive < 0xE0 && cdrom_drive >= 0xC0) ? 0xE0 : 0xC0;
/* if grub.exe is booted as a Linux kernel, check the initrd disk. */
/* the real mode zero page(only the beginning 2 sectors, the boot params) is loaded at 0xA00 */
/* check the header signature "HdrS" (0x53726448) */
ram_drive = 0x7f; /* the default ram_drive is a floppy. */
if (*(unsigned long*)(int*)(0xA00 + 0x202) == 0x53726448)
{
unsigned long initrd_addr;
unsigned long initrd_size;
initrd_addr = *(unsigned long*)(int*)(0xA00 + 0x218);
initrd_size = *(unsigned long*)(int*)(0xA00 + 0x21c);
if (initrd_addr && initrd_size)
{
rd_base = initrd_addr;
rd_size = initrd_size;
/* check if there is a partition table */
if (*(unsigned short *)(initrd_addr + 0x40) == 0xAA55)
{
if (! probe_mbr ((struct master_and_dos_boot_sector *)initrd_addr, 0, initrd_size, 0))
ram_drive = 0xfe; /* partition table is valid, so let it be a harddrive */
else
grub_printf ("\nUnrecognized partition table for RAM DRIVE; assuming floppy. Please rebuild\nit using a Microsoft-compatible FDISK tool, if the INITRD is a hard-disk image.\n");
}
}
}
#endif /* ! STAGE1_5 */
#endif /* ! GRUB_UTIL */
/* Start main routine here. */
//grub_printf("Starting cmain() ... ");
#if !defined(STAGE1_5) && !defined(GRUB_UTIL)
DEBUG_SLEEP
#endif /* ! STAGE1_5 && ! GRUB_UTIL */
// cmain (); /* moved into asm.S and asmstub.c */
}