| /************************************************************************** |
| * forcedeth.c -- Etherboot device driver for the NVIDIA nForce |
| * media access controllers. |
| * |
| * Note: This driver is based on the Linux driver that was based on |
| * a cleanroom reimplementation which was based on reverse |
| * engineered documentation written by Carl-Daniel Hailfinger |
| * and Andrew de Quincey. It's neither supported nor endorsed |
| * by NVIDIA Corp. Use at your own risk. |
| * |
| * Written 2004 by Timothy Legge <tlegge@rogers.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| * Portions of this code based on: |
| * forcedeth: Ethernet driver for NVIDIA nForce media access controllers: |
| * |
| * (C) 2003 Manfred Spraul |
| * See Linux Driver for full information |
| * |
| * Linux Driver Version 0.22, 19 Jan 2004 |
| * |
| * |
| * REVISION HISTORY: |
| * ================ |
| * v1.0 01-31-2004 timlegge Initial port of Linux driver |
| * v1.1 02-03-2004 timlegge Large Clean up, first release |
| * |
| * Indent Options: indent -kr -i8 |
| ***************************************************************************/ |
| |
| /* to get some global routines like printf */ |
| #include "etherboot.h" |
| /* to get the interface to the body of the program */ |
| #include "nic.h" |
| /* to get the PCI support functions, if this is a PCI NIC */ |
| #include "pci.h" |
| /* Include timer support functions */ |
| #include "timer.h" |
| |
| #define drv_version "v1.1" |
| #define drv_date "02-03-2004" |
| |
| //#define TFTM_DEBUG |
| #ifdef TFTM_DEBUG |
| #define dprintf(x) printf x |
| #else |
| #define dprintf(x) |
| #endif |
| |
| typedef unsigned char u8; |
| typedef signed char s8; |
| typedef unsigned short u16; |
| typedef signed short s16; |
| typedef unsigned int u32; |
| typedef signed int s32; |
| |
| /* Condensed operations for readability. */ |
| #define virt_to_le32desc(addr) cpu_to_le32(virt_to_bus(addr)) |
| #define le32desc_to_virt(addr) bus_to_virt(le32_to_cpu(addr)) |
| |
| unsigned long BASE; |
| /* NIC specific static variables go here */ |
| |
| |
| /* |
| * Hardware access: |
| */ |
| |
| #define DEV_NEED_LASTPACKET1 0x0001 |
| #define DEV_IRQMASK_1 0x0002 |
| #define DEV_IRQMASK_2 0x0004 |
| #define DEV_NEED_TIMERIRQ 0x0008 |
| |
| enum { |
| NvRegIrqStatus = 0x000, |
| #define NVREG_IRQSTAT_MIIEVENT 0040 |
| #define NVREG_IRQSTAT_MASK 0x1ff |
| NvRegIrqMask = 0x004, |
| #define NVREG_IRQ_RX 0x0002 |
| #define NVREG_IRQ_RX_NOBUF 0x0004 |
| #define NVREG_IRQ_TX_ERR 0x0008 |
| #define NVREG_IRQ_TX2 0x0010 |
| #define NVREG_IRQ_TIMER 0x0020 |
| #define NVREG_IRQ_LINK 0x0040 |
| #define NVREG_IRQ_TX1 0x0100 |
| #define NVREG_IRQMASK_WANTED_1 0x005f |
| #define NVREG_IRQMASK_WANTED_2 0x0147 |
| #define NVREG_IRQ_UNKNOWN (~(NVREG_IRQ_RX|NVREG_IRQ_RX_NOBUF|NVREG_IRQ_TX_ERR|NVREG_IRQ_TX2|NVREG_IRQ_TIMER|NVREG_IRQ_LINK|NVREG_IRQ_TX1)) |
| |
| NvRegUnknownSetupReg6 = 0x008, |
| #define NVREG_UNKSETUP6_VAL 3 |
| |
| /* |
| * NVREG_POLL_DEFAULT is the interval length of the timer source on the nic |
| * NVREG_POLL_DEFAULT=97 would result in an interval length of 1 ms |
| */ |
| NvRegPollingInterval = 0x00c, |
| #define NVREG_POLL_DEFAULT 970 |
| NvRegMisc1 = 0x080, |
| #define NVREG_MISC1_HD 0x02 |
| #define NVREG_MISC1_FORCE 0x3b0f3c |
| |
| NvRegTransmitterControl = 0x084, |
| #define NVREG_XMITCTL_START 0x01 |
| NvRegTransmitterStatus = 0x088, |
| #define NVREG_XMITSTAT_BUSY 0x01 |
| |
| NvRegPacketFilterFlags = 0x8c, |
| #define NVREG_PFF_ALWAYS 0x7F0008 |
| #define NVREG_PFF_PROMISC 0x80 |
| #define NVREG_PFF_MYADDR 0x20 |
| |
| NvRegOffloadConfig = 0x90, |
| #define NVREG_OFFLOAD_HOMEPHY 0x601 |
| #define NVREG_OFFLOAD_NORMAL 0x5ee |
| NvRegReceiverControl = 0x094, |
| #define NVREG_RCVCTL_START 0x01 |
| NvRegReceiverStatus = 0x98, |
| #define NVREG_RCVSTAT_BUSY 0x01 |
| |
| NvRegRandomSeed = 0x9c, |
| #define NVREG_RNDSEED_MASK 0x00ff |
| #define NVREG_RNDSEED_FORCE 0x7f00 |
| |
| NvRegUnknownSetupReg1 = 0xA0, |
| #define NVREG_UNKSETUP1_VAL 0x16070f |
| NvRegUnknownSetupReg2 = 0xA4, |
| #define NVREG_UNKSETUP2_VAL 0x16 |
| NvRegMacAddrA = 0xA8, |
| NvRegMacAddrB = 0xAC, |
| NvRegMulticastAddrA = 0xB0, |
| #define NVREG_MCASTADDRA_FORCE 0x01 |
| NvRegMulticastAddrB = 0xB4, |
| NvRegMulticastMaskA = 0xB8, |
| NvRegMulticastMaskB = 0xBC, |
| |
| NvRegTxRingPhysAddr = 0x100, |
| NvRegRxRingPhysAddr = 0x104, |
| NvRegRingSizes = 0x108, |
| #define NVREG_RINGSZ_TXSHIFT 0 |
| #define NVREG_RINGSZ_RXSHIFT 16 |
| NvRegUnknownTransmitterReg = 0x10c, |
| NvRegLinkSpeed = 0x110, |
| #define NVREG_LINKSPEED_FORCE 0x10000 |
| #define NVREG_LINKSPEED_10 10 |
| #define NVREG_LINKSPEED_100 100 |
| #define NVREG_LINKSPEED_1000 1000 |
| NvRegUnknownSetupReg5 = 0x130, |
| #define NVREG_UNKSETUP5_BIT31 (1<<31) |
| NvRegUnknownSetupReg3 = 0x134, |
| #define NVREG_UNKSETUP3_VAL1 0x200010 |
| NvRegTxRxControl = 0x144, |
| #define NVREG_TXRXCTL_KICK 0x0001 |
| #define NVREG_TXRXCTL_BIT1 0x0002 |
| #define NVREG_TXRXCTL_BIT2 0x0004 |
| #define NVREG_TXRXCTL_IDLE 0x0008 |
| #define NVREG_TXRXCTL_RESET 0x0010 |
| NvRegMIIStatus = 0x180, |
| #define NVREG_MIISTAT_ERROR 0x0001 |
| #define NVREG_MIISTAT_LINKCHANGE 0x0008 |
| #define NVREG_MIISTAT_MASK 0x000f |
| #define NVREG_MIISTAT_MASK2 0x000f |
| NvRegUnknownSetupReg4 = 0x184, |
| #define NVREG_UNKSETUP4_VAL 8 |
| |
| NvRegAdapterControl = 0x188, |
| #define NVREG_ADAPTCTL_START 0x02 |
| #define NVREG_ADAPTCTL_LINKUP 0x04 |
| #define NVREG_ADAPTCTL_PHYVALID 0x4000 |
| #define NVREG_ADAPTCTL_RUNNING 0x100000 |
| #define NVREG_ADAPTCTL_PHYSHIFT 24 |
| NvRegMIISpeed = 0x18c, |
| #define NVREG_MIISPEED_BIT8 (1<<8) |
| #define NVREG_MIIDELAY 5 |
| NvRegMIIControl = 0x190, |
| #define NVREG_MIICTL_INUSE 0x10000 |
| #define NVREG_MIICTL_WRITE 0x08000 |
| #define NVREG_MIICTL_ADDRSHIFT 5 |
| NvRegMIIData = 0x194, |
| NvRegWakeUpFlags = 0x200, |
| #define NVREG_WAKEUPFLAGS_VAL 0x7770 |
| #define NVREG_WAKEUPFLAGS_BUSYSHIFT 24 |
| #define NVREG_WAKEUPFLAGS_ENABLESHIFT 16 |
| #define NVREG_WAKEUPFLAGS_D3SHIFT 12 |
| #define NVREG_WAKEUPFLAGS_D2SHIFT 8 |
| #define NVREG_WAKEUPFLAGS_D1SHIFT 4 |
| #define NVREG_WAKEUPFLAGS_D0SHIFT 0 |
| #define NVREG_WAKEUPFLAGS_ACCEPT_MAGPAT 0x01 |
| #define NVREG_WAKEUPFLAGS_ACCEPT_WAKEUPPAT 0x02 |
| #define NVREG_WAKEUPFLAGS_ACCEPT_LINKCHANGE 0x04 |
| |
| NvRegPatternCRC = 0x204, |
| NvRegPatternMask = 0x208, |
| NvRegPowerCap = 0x268, |
| #define NVREG_POWERCAP_D3SUPP (1<<30) |
| #define NVREG_POWERCAP_D2SUPP (1<<26) |
| #define NVREG_POWERCAP_D1SUPP (1<<25) |
| NvRegPowerState = 0x26c, |
| #define NVREG_POWERSTATE_POWEREDUP 0x8000 |
| #define NVREG_POWERSTATE_VALID 0x0100 |
| #define NVREG_POWERSTATE_MASK 0x0003 |
| #define NVREG_POWERSTATE_D0 0x0000 |
| #define NVREG_POWERSTATE_D1 0x0001 |
| #define NVREG_POWERSTATE_D2 0x0002 |
| #define NVREG_POWERSTATE_D3 0x0003 |
| }; |
| |
| |
| |
| #define NV_TX_LASTPACKET (1<<0) |
| #define NV_TX_RETRYERROR (1<<3) |
| #define NV_TX_LASTPACKET1 (1<<8) |
| #define NV_TX_DEFERRED (1<<10) |
| #define NV_TX_CARRIERLOST (1<<11) |
| #define NV_TX_LATECOLLISION (1<<12) |
| #define NV_TX_UNDERFLOW (1<<13) |
| #define NV_TX_ERROR (1<<14) |
| #define NV_TX_VALID (1<<15) |
| |
| #define NV_RX_DESCRIPTORVALID (1<<0) |
| #define NV_RX_MISSEDFRAME (1<<1) |
| #define NV_RX_SUBSTRACT1 (1<<3) |
| #define NV_RX_ERROR1 (1<<7) |
| #define NV_RX_ERROR2 (1<<8) |
| #define NV_RX_ERROR3 (1<<9) |
| #define NV_RX_ERROR4 (1<<10) |
| #define NV_RX_CRCERR (1<<11) |
| #define NV_RX_OVERFLOW (1<<12) |
| #define NV_RX_FRAMINGERR (1<<13) |
| #define NV_RX_ERROR (1<<14) |
| #define NV_RX_AVAIL (1<<15) |
| |
| /* Miscelaneous hardware related defines: */ |
| #define NV_PCI_REGSZ 0x270 |
| |
| /* various timeout delays: all in usec */ |
| #define NV_TXRX_RESET_DELAY 4 |
| #define NV_TXSTOP_DELAY1 10 |
| #define NV_TXSTOP_DELAY1MAX 500000 |
| #define NV_TXSTOP_DELAY2 100 |
| #define NV_RXSTOP_DELAY1 10 |
| #define NV_RXSTOP_DELAY1MAX 500000 |
| #define NV_RXSTOP_DELAY2 100 |
| #define NV_SETUP5_DELAY 5 |
| #define NV_SETUP5_DELAYMAX 50000 |
| #define NV_POWERUP_DELAY 5 |
| #define NV_POWERUP_DELAYMAX 5000 |
| #define NV_MIIBUSY_DELAY 50 |
| #define NV_MIIPHY_DELAY 10 |
| #define NV_MIIPHY_DELAYMAX 10000 |
| |
| #define NV_WAKEUPPATTERNS 5 |
| #define NV_WAKEUPMASKENTRIES 4 |
| |
| /* General driver defaults */ |
| #define NV_WATCHDOG_TIMEO (2*HZ) |
| #define DEFAULT_MTU 1500 /* also maximum supported, at least for now */ |
| |
| #define RX_RING 4 |
| #define TX_RING 2 |
| /* limited to 1 packet until we understand NV_TX_LASTPACKET */ |
| #define TX_LIMIT_STOP 10 |
| #define TX_LIMIT_START 5 |
| |
| /* rx/tx mac addr + type + vlan + align + slack*/ |
| #define RX_NIC_BUFSIZE (DEFAULT_MTU + 64) |
| /* even more slack */ |
| #define RX_ALLOC_BUFSIZE (DEFAULT_MTU + 128) |
| |
| #define OOM_REFILL (1+HZ/20) |
| #define POLL_WAIT (1+HZ/100) |
| |
| struct ring_desc { |
| u32 PacketBuffer; |
| u16 Length; |
| u16 Flags; |
| }; |
| |
| |
| /* Define the TX Descriptor */ |
| static struct ring_desc tx_ring[TX_RING]; |
| |
| /* Create a static buffer of size RX_BUF_SZ for each |
| TX Descriptor. All descriptors point to a |
| part of this buffer */ |
| static unsigned char txb[TX_RING * RX_NIC_BUFSIZE]; |
| |
| /* Define the TX Descriptor */ |
| static struct ring_desc rx_ring[RX_RING]; |
| |
| /* Create a static buffer of size RX_BUF_SZ for each |
| RX Descriptor All descriptors point to a |
| part of this buffer */ |
| static unsigned char rxb[RX_RING * RX_NIC_BUFSIZE]; |
| |
| /* Private Storage for the NIC */ |
| struct forcedeth_private { |
| /* General data: |
| * Locking: spin_lock(&np->lock); */ |
| int in_shutdown; |
| u32 linkspeed; |
| int duplex; |
| int phyaddr; |
| |
| /* General data: RO fields */ |
| u8 *ring_addr; |
| u32 orig_mac[2]; |
| u32 irqmask; |
| /* rx specific fields. |
| * Locking: Within irq hander or disable_irq+spin_lock(&np->lock); |
| */ |
| struct ring_desc *rx_ring; |
| unsigned int cur_rx, refill_rx; |
| struct sk_buff *rx_skbuff[RX_RING]; |
| u32 rx_dma[RX_RING]; |
| unsigned int rx_buf_sz; |
| |
| /* |
| * tx specific fields. |
| */ |
| struct ring_desc *tx_ring; |
| unsigned int next_tx, nic_tx; |
| struct sk_buff *tx_skbuff[TX_RING]; |
| u32 tx_dma[TX_RING]; |
| u16 tx_flags; |
| } npx; |
| |
| static struct forcedeth_private *np; |
| |
| static inline void pci_push(u8 * base) |
| { |
| /* force out pending posted writes */ |
| readl(base); |
| } |
| static int reg_delay(int offset, u32 mask, |
| u32 target, int delay, int delaymax, const char *msg) |
| { |
| u8 *base = (u8 *) BASE; |
| |
| pci_push(base); |
| do { |
| udelay(delay); |
| delaymax -= delay; |
| if (delaymax < 0) { |
| if (msg) |
| printf(msg); |
| return 1; |
| } |
| } while ((readl(base + offset) & mask) != target); |
| return 0; |
| } |
| |
| #define MII_READ (-1) |
| #define MII_PHYSID1 0x02 /* PHYS ID 1 */ |
| #define MII_PHYSID2 0x03 /* PHYS ID 2 */ |
| #define MII_BMCR 0x00 /* Basic mode control register */ |
| #define MII_BMSR 0x01 /* Basic mode status register */ |
| #define MII_ADVERTISE 0x04 /* Advertisement control reg */ |
| #define MII_LPA 0x05 /* Link partner ability reg */ |
| |
| #define BMSR_ANEGCOMPLETE 0x0020 /* Auto-negotiation complete */ |
| |
| /* Link partner ability register. */ |
| #define LPA_SLCT 0x001f /* Same as advertise selector */ |
| #define LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */ |
| #define LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */ |
| #define LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */ |
| #define LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */ |
| #define LPA_100BASE4 0x0200 /* Can do 100mbps 4k packets */ |
| #define LPA_RESV 0x1c00 /* Unused... */ |
| #define LPA_RFAULT 0x2000 /* Link partner faulted */ |
| #define LPA_LPACK 0x4000 /* Link partner acked us */ |
| #define LPA_NPAGE 0x8000 /* Next page bit */ |
| |
| /* mii_rw: read/write a register on the PHY. |
| * |
| * Caller must guarantee serialization |
| */ |
| static int mii_rw(struct nic *nic __unused, int addr, int miireg, |
| int value) |
| { |
| u8 *base = (u8 *) BASE; |
| int was_running; |
| u32 reg; |
| int retval; |
| |
| writel(NVREG_MIISTAT_MASK, base + NvRegMIIStatus); |
| was_running = 0; |
| reg = readl(base + NvRegAdapterControl); |
| if (reg & NVREG_ADAPTCTL_RUNNING) { |
| was_running = 1; |
| writel(reg & ~NVREG_ADAPTCTL_RUNNING, |
| base + NvRegAdapterControl); |
| } |
| reg = readl(base + NvRegMIIControl); |
| if (reg & NVREG_MIICTL_INUSE) { |
| writel(NVREG_MIICTL_INUSE, base + NvRegMIIControl); |
| udelay(NV_MIIBUSY_DELAY); |
| } |
| |
| reg = |
| NVREG_MIICTL_INUSE | (addr << NVREG_MIICTL_ADDRSHIFT) | miireg; |
| if (value != MII_READ) { |
| writel(value, base + NvRegMIIData); |
| reg |= NVREG_MIICTL_WRITE; |
| } |
| writel(reg, base + NvRegMIIControl); |
| |
| if (reg_delay(NvRegMIIControl, NVREG_MIICTL_INUSE, 0, |
| NV_MIIPHY_DELAY, NV_MIIPHY_DELAYMAX, NULL)) { |
| dprintf(("mii_rw of reg %d at PHY %d timed out.\n", |
| miireg, addr)); |
| retval = -1; |
| } else if (value != MII_READ) { |
| /* it was a write operation - fewer failures are detectable */ |
| dprintf(("mii_rw wrote 0x%x to reg %d at PHY %d\n", |
| value, miireg, addr)); |
| retval = 0; |
| } else if (readl(base + NvRegMIIStatus) & NVREG_MIISTAT_ERROR) { |
| dprintf(("mii_rw of reg %d at PHY %d failed.\n", |
| miireg, addr)); |
| retval = -1; |
| } else { |
| /* FIXME: why is that required? */ |
| udelay(50); |
| retval = readl(base + NvRegMIIData); |
| dprintf(("mii_rw read from reg %d at PHY %d: 0x%x.\n", |
| miireg, addr, retval)); |
| } |
| if (was_running) { |
| reg = readl(base + NvRegAdapterControl); |
| writel(reg | NVREG_ADAPTCTL_RUNNING, |
| base + NvRegAdapterControl); |
| } |
| return retval; |
| } |
| |
| static void start_rx(struct nic *nic __unused) |
| { |
| u8 *base = (u8 *) BASE; |
| |
| dprintf(("start_rx\n")); |
| /* Already running? Stop it. */ |
| if (readl(base + NvRegReceiverControl) & NVREG_RCVCTL_START) { |
| writel(0, base + NvRegReceiverControl); |
| pci_push(base); |
| } |
| writel(np->linkspeed, base + NvRegLinkSpeed); |
| pci_push(base); |
| writel(NVREG_RCVCTL_START, base + NvRegReceiverControl); |
| pci_push(base); |
| } |
| |
| static void stop_rx(void) |
| { |
| u8 *base = (u8 *) BASE; |
| |
| dprintf(("stop_rx\n")); |
| writel(0, base + NvRegReceiverControl); |
| reg_delay(NvRegReceiverStatus, NVREG_RCVSTAT_BUSY, 0, |
| NV_RXSTOP_DELAY1, NV_RXSTOP_DELAY1MAX, |
| "stop_rx: ReceiverStatus remained busy"); |
| |
| udelay(NV_RXSTOP_DELAY2); |
| writel(0, base + NvRegLinkSpeed); |
| } |
| |
| static void start_tx(struct nic *nic __unused) |
| { |
| u8 *base = (u8 *) BASE; |
| |
| dprintf(("start_tx\n")); |
| writel(NVREG_XMITCTL_START, base + NvRegTransmitterControl); |
| pci_push(base); |
| } |
| |
| static void stop_tx(void) |
| { |
| u8 *base = (u8 *) BASE; |
| |
| dprintf(("stop_tx\n")); |
| writel(0, base + NvRegTransmitterControl); |
| reg_delay(NvRegTransmitterStatus, NVREG_XMITSTAT_BUSY, 0, |
| NV_TXSTOP_DELAY1, NV_TXSTOP_DELAY1MAX, |
| "stop_tx: TransmitterStatus remained busy"); |
| |
| udelay(NV_TXSTOP_DELAY2); |
| writel(0, base + NvRegUnknownTransmitterReg); |
| } |
| |
| |
| static void txrx_reset(struct nic *nic __unused) |
| { |
| u8 *base = (u8 *) BASE; |
| |
| dprintf(("txrx_reset\n")); |
| writel(NVREG_TXRXCTL_BIT2 | NVREG_TXRXCTL_RESET, |
| base + NvRegTxRxControl); |
| pci_push(base); |
| udelay(NV_TXRX_RESET_DELAY); |
| writel(NVREG_TXRXCTL_BIT2, base + NvRegTxRxControl); |
| pci_push(base); |
| } |
| |
| /* |
| * alloc_rx: fill rx ring entries. |
| * Return 1 if the allocations for the skbs failed and the |
| * rx engine is without Available descriptors |
| */ |
| static int alloc_rx(struct nic *nic __unused) |
| { |
| unsigned int refill_rx = np->refill_rx; |
| int i; |
| //while (np->cur_rx != refill_rx) { |
| for (i = 0; i < RX_RING; i++) { |
| //int nr = refill_rx % RX_RING; |
| rx_ring[i].PacketBuffer = |
| virt_to_le32desc(&rxb[i * RX_NIC_BUFSIZE]); |
| rx_ring[i].Length = cpu_to_le16(RX_NIC_BUFSIZE); |
| wmb(); |
| rx_ring[i].Flags = cpu_to_le16(NV_RX_AVAIL); |
| /* printf("alloc_rx: Packet %d marked as Available\n", |
| refill_rx); */ |
| refill_rx++; |
| } |
| np->refill_rx = refill_rx; |
| if (np->cur_rx - refill_rx == RX_RING) |
| return 1; |
| return 0; |
| } |
| |
| static int update_linkspeed(struct nic *nic) |
| { |
| int adv, lpa, newdup; |
| u32 newls; |
| adv = mii_rw(nic, np->phyaddr, MII_ADVERTISE, MII_READ); |
| lpa = mii_rw(nic, np->phyaddr, MII_LPA, MII_READ); |
| dprintf(("update_linkspeed: PHY advertises 0x%hX, lpa 0x%hX.\n", |
| adv, lpa)); |
| |
| /* FIXME: handle parallel detection properly, handle gigabit ethernet */ |
| lpa = lpa & adv; |
| if (lpa & LPA_100FULL) { |
| newls = NVREG_LINKSPEED_FORCE | NVREG_LINKSPEED_100; |
| newdup = 1; |
| } else if (lpa & LPA_100HALF) { |
| newls = NVREG_LINKSPEED_FORCE | NVREG_LINKSPEED_100; |
| newdup = 0; |
| } else if (lpa & LPA_10FULL) { |
| newls = NVREG_LINKSPEED_FORCE | NVREG_LINKSPEED_10; |
| newdup = 1; |
| } else if (lpa & LPA_10HALF) { |
| newls = NVREG_LINKSPEED_FORCE | NVREG_LINKSPEED_10; |
| newdup = 0; |
| } else { |
| printf("bad ability %hX - falling back to 10HD.\n", lpa); |
| newls = NVREG_LINKSPEED_FORCE | NVREG_LINKSPEED_10; |
| newdup = 0; |
| } |
| if (np->duplex != newdup || np->linkspeed != newls) { |
| np->duplex = newdup; |
| np->linkspeed = newls; |
| return 1; |
| } |
| return 0; |
| } |
| |
| |
| |
| static int init_ring(struct nic *nic) |
| { |
| int i; |
| |
| np->next_tx = np->nic_tx = 0; |
| for (i = 0; i < TX_RING; i++) { |
| tx_ring[i].Flags = 0; |
| } |
| |
| np->cur_rx = 0; |
| np->refill_rx = 0; |
| for (i = 0; i < RX_RING; i++) { |
| rx_ring[i].Flags = 0; |
| } |
| return alloc_rx(nic); |
| } |
| |
| static void set_multicast(struct nic *nic) |
| { |
| |
| u8 *base = (u8 *) BASE; |
| u32 addr[2]; |
| u32 mask[2]; |
| u32 pff; |
| u32 alwaysOff[2]; |
| u32 alwaysOn[2]; |
| |
| memset(addr, 0, sizeof(addr)); |
| memset(mask, 0, sizeof(mask)); |
| |
| pff = NVREG_PFF_MYADDR; |
| |
| alwaysOn[0] = alwaysOn[1] = alwaysOff[0] = alwaysOff[1] = 0; |
| |
| addr[0] = alwaysOn[0]; |
| addr[1] = alwaysOn[1]; |
| mask[0] = alwaysOn[0] | alwaysOff[0]; |
| mask[1] = alwaysOn[1] | alwaysOff[1]; |
| |
| addr[0] |= NVREG_MCASTADDRA_FORCE; |
| pff |= NVREG_PFF_ALWAYS; |
| stop_rx(); |
| writel(addr[0], base + NvRegMulticastAddrA); |
| writel(addr[1], base + NvRegMulticastAddrB); |
| writel(mask[0], base + NvRegMulticastMaskA); |
| writel(mask[1], base + NvRegMulticastMaskB); |
| writel(pff, base + NvRegPacketFilterFlags); |
| start_rx(nic); |
| } |
| |
| /************************************************************************** |
| RESET - Reset the NIC to prepare for use |
| ***************************************************************************/ |
| static int forcedeth_reset(struct nic *nic) |
| { |
| u8 *base = (u8 *) BASE; |
| int ret, oom, i; |
| ret = 0; |
| dprintf(("forcedeth: open\n")); |
| |
| /* 1) erase previous misconfiguration */ |
| /* 4.1-1: stop adapter: ignored, 4.3 seems to be overkill */ |
| writel(NVREG_MCASTADDRA_FORCE, base + NvRegMulticastAddrA); |
| writel(0, base + NvRegMulticastAddrB); |
| writel(0, base + NvRegMulticastMaskA); |
| writel(0, base + NvRegMulticastMaskB); |
| writel(0, base + NvRegPacketFilterFlags); |
| writel(0, base + NvRegAdapterControl); |
| writel(0, base + NvRegLinkSpeed); |
| writel(0, base + NvRegUnknownTransmitterReg); |
| txrx_reset(nic); |
| writel(0, base + NvRegUnknownSetupReg6); |
| |
| /* 2) initialize descriptor rings */ |
| np->in_shutdown = 0; |
| oom = init_ring(nic); |
| |
| /* 3) set mac address */ |
| { |
| u32 mac[2]; |
| |
| mac[0] = |
| (nic->node_addr[0] << 0) + (nic->node_addr[1] << 8) + |
| (nic->node_addr[2] << 16) + (nic->node_addr[3] << 24); |
| mac[1] = |
| (nic->node_addr[4] << 0) + (nic->node_addr[5] << 8); |
| |
| writel(mac[0], base + NvRegMacAddrA); |
| writel(mac[1], base + NvRegMacAddrB); |
| } |
| |
| /* 4) continue setup */ |
| np->linkspeed = NVREG_LINKSPEED_FORCE | NVREG_LINKSPEED_10; |
| np->duplex = 0; |
| writel(NVREG_UNKSETUP3_VAL1, base + NvRegUnknownSetupReg3); |
| writel(0, base + NvRegTxRxControl); |
| pci_push(base); |
| writel(NVREG_TXRXCTL_BIT1, base + NvRegTxRxControl); |
| |
| reg_delay(NvRegUnknownSetupReg5, NVREG_UNKSETUP5_BIT31, |
| NVREG_UNKSETUP5_BIT31, NV_SETUP5_DELAY, |
| NV_SETUP5_DELAYMAX, |
| "open: SetupReg5, Bit 31 remained off\n"); |
| writel(0, base + NvRegUnknownSetupReg4); |
| |
| /* 5) Find a suitable PHY */ |
| writel(NVREG_MIISPEED_BIT8 | NVREG_MIIDELAY, base + NvRegMIISpeed); |
| for (i = 1; i < 32; i++) { |
| int id1, id2; |
| |
| id1 = mii_rw(nic, i, MII_PHYSID1, MII_READ); |
| if (id1 < 0) |
| continue; |
| id2 = mii_rw(nic, i, MII_PHYSID2, MII_READ); |
| if (id2 < 0) |
| continue; |
| dprintf(("open: Found PHY %04x:%04x at address %d.\n", |
| id1, id2, i)); |
| np->phyaddr = i; |
| |
| update_linkspeed(nic); |
| |
| break; |
| } |
| if (i == 32) { |
| printf("open: failing due to lack of suitable PHY.\n"); |
| ret = -1; |
| goto out_drain; |
| } |
| |
| printf("%d-Mbs Link, %s-Duplex\n", |
| np->linkspeed & NVREG_LINKSPEED_10 ? 10 : 100, |
| np->duplex ? "Full" : "Half"); |
| /* 6) continue setup */ |
| writel(NVREG_MISC1_FORCE | (np->duplex ? 0 : NVREG_MISC1_HD), |
| base + NvRegMisc1); |
| writel(readl(base + NvRegTransmitterStatus), |
| base + NvRegTransmitterStatus); |
| writel(NVREG_PFF_ALWAYS, base + NvRegPacketFilterFlags); |
| writel(NVREG_OFFLOAD_NORMAL, base + NvRegOffloadConfig); |
| |
| writel(readl(base + NvRegReceiverStatus), |
| base + NvRegReceiverStatus); |
| |
| /* FIXME: I cheated and used the calculator to get a random number */ |
| i = 75963081; |
| writel(NVREG_RNDSEED_FORCE | (i & NVREG_RNDSEED_MASK), |
| base + NvRegRandomSeed); |
| writel(NVREG_UNKSETUP1_VAL, base + NvRegUnknownSetupReg1); |
| writel(NVREG_UNKSETUP2_VAL, base + NvRegUnknownSetupReg2); |
| writel(NVREG_POLL_DEFAULT, base + NvRegPollingInterval); |
| writel(NVREG_UNKSETUP6_VAL, base + NvRegUnknownSetupReg6); |
| writel((np-> |
| phyaddr << NVREG_ADAPTCTL_PHYSHIFT) | |
| NVREG_ADAPTCTL_PHYVALID, base + NvRegAdapterControl); |
| writel(NVREG_UNKSETUP4_VAL, base + NvRegUnknownSetupReg4); |
| writel(NVREG_WAKEUPFLAGS_VAL, base + NvRegWakeUpFlags); |
| |
| /* 7) start packet processing */ |
| writel((u32) virt_to_le32desc(&rx_ring[0]), |
| base + NvRegRxRingPhysAddr); |
| writel((u32) virt_to_le32desc(&tx_ring[0]), |
| base + NvRegTxRingPhysAddr); |
| |
| |
| writel(((RX_RING - 1) << NVREG_RINGSZ_RXSHIFT) + |
| ((TX_RING - 1) << NVREG_RINGSZ_TXSHIFT), |
| base + NvRegRingSizes); |
| |
| i = readl(base + NvRegPowerState); |
| if ((i & NVREG_POWERSTATE_POWEREDUP) == 0) { |
| writel(NVREG_POWERSTATE_POWEREDUP | i, |
| base + NvRegPowerState); |
| } |
| pci_push(base); |
| udelay(10); |
| writel(readl(base + NvRegPowerState) | NVREG_POWERSTATE_VALID, |
| base + NvRegPowerState); |
| writel(NVREG_ADAPTCTL_RUNNING, base + NvRegAdapterControl); |
| |
| writel(0, base + NvRegIrqMask); |
| pci_push(base); |
| writel(NVREG_IRQSTAT_MASK, base + NvRegIrqStatus); |
| pci_push(base); |
| writel(NVREG_MIISTAT_MASK2, base + NvRegMIIStatus); |
| writel(NVREG_IRQSTAT_MASK, base + NvRegIrqStatus); |
| pci_push(base); |
| /* |
| writel(np->irqmask, base + NvRegIrqMask); |
| */ |
| writel(NVREG_MCASTADDRA_FORCE, base + NvRegMulticastAddrA); |
| writel(0, base + NvRegMulticastAddrB); |
| writel(0, base + NvRegMulticastMaskA); |
| writel(0, base + NvRegMulticastMaskB); |
| writel(NVREG_PFF_ALWAYS | NVREG_PFF_MYADDR, |
| base + NvRegPacketFilterFlags); |
| |
| set_multicast(nic); |
| //start_rx(nic); |
| start_tx(nic); |
| |
| if (! |
| (mii_rw(nic, np->phyaddr, MII_BMSR, MII_READ) & |
| BMSR_ANEGCOMPLETE)) { |
| printf("no link during initialization.\n"); |
| } |
| |
| udelay(10000); |
| out_drain: |
| return ret; |
| } |
| |
| //extern void hex_dump(const char *data, const unsigned int len); |
| |
| /************************************************************************** |
| POLL - Wait for a frame |
| ***************************************************************************/ |
| static int forcedeth_poll(struct nic *nic, int retrieve) |
| { |
| /* return true if there's an ethernet packet ready to read */ |
| /* nic->packet should contain data on return */ |
| /* nic->packetlen should contain length of data */ |
| |
| struct ring_desc *prd; |
| int len; |
| int i; |
| |
| i = np->cur_rx % RX_RING; |
| prd = &rx_ring[i]; |
| |
| if ( ! (prd->Flags & cpu_to_le16(NV_RX_DESCRIPTORVALID)) ) { |
| return 0; |
| } |
| |
| if ( ! retrieve ) return 1; |
| |
| /* got a valid packet - forward it to the network core */ |
| len = cpu_to_le16(prd->Length); |
| nic->packetlen = len; |
| //hex_dump(rxb + (i * RX_NIC_BUFSIZE), len); |
| memcpy(nic->packet, rxb + |
| (i * RX_NIC_BUFSIZE), nic->packetlen); |
| |
| wmb(); |
| np->cur_rx++; |
| alloc_rx(nic); |
| return 1; |
| } |
| |
| |
| /************************************************************************** |
| TRANSMIT - Transmit a frame |
| ***************************************************************************/ |
| static void forcedeth_transmit(struct nic *nic, const char *d, /* Destination */ |
| unsigned int t, /* Type */ |
| unsigned int s, /* size */ |
| const char *p) |
| { /* Packet */ |
| /* send the packet to destination */ |
| u8 *ptxb; |
| u16 nstype; |
| //u16 status; |
| u8 *base = (u8 *) BASE; |
| int nr = np->next_tx % TX_RING; |
| |
| /* point to the current txb incase multiple tx_rings are used */ |
| ptxb = txb + (nr * RX_NIC_BUFSIZE); |
| //np->tx_skbuff[nr] = ptxb; |
| |
| /* copy the packet to ring buffer */ |
| memcpy(ptxb, d, ETH_ALEN); /* dst */ |
| memcpy(ptxb + ETH_ALEN, nic->node_addr, ETH_ALEN); /* src */ |
| nstype = htons((u16) t); /* type */ |
| memcpy(ptxb + 2 * ETH_ALEN, (u8 *) & nstype, 2); /* type */ |
| memcpy(ptxb + ETH_HLEN, p, s); |
| |
| s += ETH_HLEN; |
| while (s < ETH_ZLEN) /* pad to min length */ |
| ptxb[s++] = '\0'; |
| |
| tx_ring[nr].PacketBuffer = (u32) virt_to_le32desc(ptxb); |
| tx_ring[nr].Length = cpu_to_le16(s - 1); |
| |
| wmb(); |
| tx_ring[nr].Flags = np->tx_flags; |
| |
| writel(NVREG_TXRXCTL_KICK, base + NvRegTxRxControl); |
| pci_push(base); |
| tx_ring[nr].Flags = np->tx_flags; |
| np->next_tx++; |
| } |
| |
| /************************************************************************** |
| DISABLE - Turn off ethernet interface |
| ***************************************************************************/ |
| static void forcedeth_disable(struct dev *dev __unused) |
| { |
| /* put the card in its initial state */ |
| /* This function serves 3 purposes. |
| * This disables DMA and interrupts so we don't receive |
| * unexpected packets or interrupts from the card after |
| * etherboot has finished. |
| * This frees resources so etherboot may use |
| * this driver on another interface |
| * This allows etherboot to reinitialize the interface |
| * if something is something goes wrong. |
| */ |
| u8 *base = (u8 *) BASE; |
| np->in_shutdown = 1; |
| stop_tx(); |
| stop_rx(); |
| |
| /* disable interrupts on the nic or we will lock up */ |
| writel(0, base + NvRegIrqMask); |
| pci_push(base); |
| dprintf(("Irqmask is zero again\n")); |
| |
| /* specia op:o write back the misordered MAC address - otherwise |
| * the next probe_nic would see a wrong address. |
| */ |
| writel(np->orig_mac[0], base + NvRegMacAddrA); |
| writel(np->orig_mac[1], base + NvRegMacAddrB); |
| } |
| |
| /************************************************************************** |
| IRQ - Enable, Disable, or Force interrupts |
| ***************************************************************************/ |
| static void forcedeth_irq(struct nic *nic __unused, irq_action_t action __unused) |
| { |
| switch ( action ) { |
| case DISABLE : |
| break; |
| case ENABLE : |
| break; |
| case FORCE : |
| break; |
| } |
| } |
| |
| /************************************************************************** |
| PROBE - Look for an adapter, this routine's visible to the outside |
| ***************************************************************************/ |
| #define IORESOURCE_MEM 0x00000200 |
| #define board_found 1 |
| #define valid_link 0 |
| static int forcedeth_probe(struct dev *dev, struct pci_device *pci) |
| { |
| struct nic *nic = (struct nic *) dev; |
| unsigned long addr; |
| int sz; |
| u8 *base; |
| |
| if (pci->ioaddr == 0) |
| return 0; |
| |
| printf("forcedeth.c: Found %s, vendor=0x%hX, device=0x%hX\n", |
| pci->name, pci->vendor, pci->dev_id); |
| |
| nic->irqno = 0; |
| nic->ioaddr = pci->ioaddr & ~3; |
| |
| /* point to private storage */ |
| np = &npx; |
| |
| adjust_pci_device(pci); |
| |
| addr = pci_bar_start(pci, PCI_BASE_ADDRESS_0); |
| sz = pci_bar_size(pci, PCI_BASE_ADDRESS_0); |
| |
| /* BASE is used throughout to address the card */ |
| BASE = (unsigned long) ioremap(addr, sz); |
| if (!BASE) |
| return 0; |
| //rx_ring[0] = rx_ring; |
| //tx_ring[0] = tx_ring; |
| |
| /* read the mac address */ |
| base = (u8 *) BASE; |
| np->orig_mac[0] = readl(base + NvRegMacAddrA); |
| np->orig_mac[1] = readl(base + NvRegMacAddrB); |
| |
| nic->node_addr[0] = (np->orig_mac[1] >> 8) & 0xff; |
| nic->node_addr[1] = (np->orig_mac[1] >> 0) & 0xff; |
| nic->node_addr[2] = (np->orig_mac[0] >> 24) & 0xff; |
| nic->node_addr[3] = (np->orig_mac[0] >> 16) & 0xff; |
| nic->node_addr[4] = (np->orig_mac[0] >> 8) & 0xff; |
| nic->node_addr[5] = (np->orig_mac[0] >> 0) & 0xff; |
| #ifdef LINUX |
| if (!is_valid_ether_addr(dev->dev_addr)) { |
| /* |
| * Bad mac address. At least one bios sets the mac address |
| * to 01:23:45:67:89:ab |
| */ |
| printk(KERN_ERR |
| "%s: Invalid Mac address detected: %02x:%02x:%02x:%02x:%02x:%02x\n", |
| pci_name(pci_dev), dev->dev_addr[0], |
| dev->dev_addr[1], dev->dev_addr[2], |
| dev->dev_addr[3], dev->dev_addr[4], |
| dev->dev_addr[5]); |
| printk(KERN_ERR |
| "Please complain to your hardware vendor. Switching to a random MAC.\n"); |
| dev->dev_addr[0] = 0x00; |
| dev->dev_addr[1] = 0x00; |
| dev->dev_addr[2] = 0x6c; |
| get_random_bytes(&dev->dev_addr[3], 3); |
| } |
| #endif |
| printf("%s: MAC Address %!, ", pci->name, nic->node_addr); |
| |
| np->tx_flags = |
| cpu_to_le16(NV_TX_LASTPACKET | NV_TX_LASTPACKET1 | |
| NV_TX_VALID); |
| switch (pci->dev_id) { |
| case 0x01C3: // nforce |
| np->irqmask = NVREG_IRQMASK_WANTED_2; |
| np->irqmask |= NVREG_IRQ_TIMER; |
| break; |
| case 0x0066: // nforce2 |
| np->tx_flags |= cpu_to_le16(NV_TX_LASTPACKET1); |
| np->irqmask = NVREG_IRQMASK_WANTED_2; |
| np->irqmask |= NVREG_IRQ_TIMER; |
| break; |
| case 0x00D6: // nforce3 |
| np->tx_flags |= cpu_to_le16(NV_TX_LASTPACKET1); |
| np->irqmask = NVREG_IRQMASK_WANTED_2; |
| np->irqmask |= NVREG_IRQ_TIMER; |
| |
| } |
| dprintf(("%s: forcedeth.c: subsystem: %hX:%hX bound to %s\n", |
| pci->name, pci->vendor, pci->dev_id, pci->name)); |
| |
| forcedeth_reset(nic); |
| // if (board_found && valid_link) |
| /* point to NIC specific routines */ |
| dev->disable = forcedeth_disable; |
| nic->poll = forcedeth_poll; |
| nic->transmit = forcedeth_transmit; |
| nic->irq = forcedeth_irq; |
| return 1; |
| // } |
| /* else */ |
| } |
| |
| static struct pci_id forcedeth_nics[] = { |
| PCI_ROM(0x10de, 0x01C3, "nforce", "nForce Ethernet Controller"), |
| PCI_ROM(0x10de, 0x0066, "nforce2", "nForce2 Ethernet Controller"), |
| PCI_ROM(0x10de, 0x00D6, "nforce3", "nForce3 Ethernet Controller"), |
| }; |
| |
| struct pci_driver forcedeth_driver = { |
| .type = NIC_DRIVER, |
| .name = "forcedeth", |
| .probe = forcedeth_probe, |
| .ids = forcedeth_nics, |
| .id_count = sizeof(forcedeth_nics) / sizeof(forcedeth_nics[0]), |
| .class = 0, |
| }; |