| /* cmdline.c - the device-independent GRUB text command line */ |
| /* |
| * GRUB -- GRand Unified Bootloader |
| * Copyright (C) 1996 Erich Boleyn <erich@uruk.org> |
| * Copyright (C) 1999 Free Software Foundation, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include "shared.h" |
| |
| #ifndef GRUB_UTIL |
| |
| /* |
| * This is the Intel MultiProcessor Spec debugging/display code. |
| */ |
| |
| #define IMPS_DEBUG |
| #define KERNEL_PRINT(x) printf x |
| #define CMOS_WRITE_BYTE(x, y) cmos_write_byte(x, y) |
| #define CMOS_READ_BYTE(x) cmos_read_byte(x) |
| #define PHYS_TO_VIRTUAL(x) (x) |
| #define VIRTUAL_TO_PHYS(x) (x) |
| |
| static inline unsigned char |
| inb (unsigned short port) |
| { |
| unsigned char data; |
| |
| __asm __volatile ("inb %1,%0":"=a" (data):"d" (port)); |
| return data; |
| } |
| |
| static inline void |
| outb (unsigned short port, unsigned char val) |
| { |
| __asm __volatile ("outb %0,%1"::"a" (val), "d" (port)); |
| } |
| |
| |
| __inline__ static void |
| cmos_write_byte(int loc, int val) |
| { |
| outb(0x70, loc); |
| outb(0x71, val); |
| } |
| |
| __inline__ static unsigned |
| cmos_read_byte(int loc) |
| { |
| outb(0x70, loc); |
| return inb(0x71); |
| } |
| |
| #include "smp-imps.c" |
| |
| #endif /* ! GRUB_UTIL */ |
| |
| /* |
| * These are used for determining if the command-line should ask the user |
| * to correct errors during scripts. |
| */ |
| int fallback; |
| char *password; |
| |
| /* True when the debug mode is turned on, and false when it is turned off. */ |
| int debug = 0; |
| |
| /* Color settings */ |
| int normal_color; |
| int highlight_color; |
| |
| char * |
| skip_to(int after_equal, char *cmdline) |
| { |
| while (*cmdline && (*cmdline != (after_equal ? '=' : ' '))) |
| cmdline++; |
| |
| if (after_equal) |
| cmdline++; |
| |
| while (*cmdline == ' ') |
| cmdline++; |
| |
| return cmdline; |
| } |
| |
| |
| void |
| init_cmdline(void) |
| { |
| printf(" [ Minimal BASH-like line editing is supported. For the first word, TAB |
| lists possible command completions. Anywhere else TAB lists the possible |
| completions of a device/filename. ESC at any time exits. ]\n"); |
| } |
| |
| char commands[] = |
| " Possible commands are: \"pause= ...\", \"uppermem= <kbytes>\", \"root= <device>\", |
| \"rootnoverify= <device>\", \"chainloader= <file>\", \"kernel= <file> ...\", |
| \"testload= <file>\", \"read= <addr>\", \"displaymem\", \"impsprobe\", |
| \"fstest\", \"debug\", \"module= <file> ...\", \"modulenounzip= <file> ...\", |
| \"color= <normal> [<highlight>]\", \"makeactive\", \"boot\", \"quit\" and |
| \"install= <stage1_file> [d] <dest_dev> <file> <addr> [p] [<config_file>]\"\n"; |
| |
| static void |
| debug_fs_print_func(int sector) |
| { |
| printf("[%d]", sector); |
| } |
| |
| static int installaddr, installlist, installsect; |
| |
| static void |
| debug_fs_blocklist_func(int sector) |
| { |
| if (debug) |
| printf("[%d]", sector); |
| |
| if (*((unsigned long *)(installlist-4)) |
| + *((unsigned short *)installlist) != sector |
| || installlist == BOOTSEC_LOCATION+STAGE1_FIRSTLIST+4) |
| { |
| installlist -= 8; |
| |
| if (*((unsigned long *)(installlist-8))) |
| errnum = ERR_WONT_FIT; |
| else |
| { |
| *((unsigned short *)(installlist+2)) = (installaddr >> 4); |
| *((unsigned long *)(installlist-4)) = sector; |
| } |
| } |
| |
| *((unsigned short *)installlist) += 1; |
| installsect = sector; |
| installaddr += 512; |
| } |
| |
| |
| /* Run the command-line interface or execute a command from SCRIPT if |
| SCRIPT is not NULL. Return CMDLINE_OK if successful, CMDLINE_ABORT |
| if ``quit'' command is executed, and CMDLINE_ERROR if an error |
| occures or ESC is pushed. */ |
| cmdline_t |
| enter_cmdline (char *script, char *heap) |
| { |
| int bootdev, cmd_len, type = 0, run_cmdline = 1, have_run_cmdline = 0; |
| char *cur_heap = heap, *cur_entry = script, *old_entry; |
| |
| /* initialization */ |
| saved_drive = boot_drive; |
| saved_partition = install_partition; |
| current_drive = 0xFF; |
| errnum = 0; |
| |
| /* restore memory probe state */ |
| mbi.mem_upper = saved_mem_upper; |
| if (mbi.mmap_length) |
| mbi.flags |= MB_INFO_MEM_MAP; |
| |
| /* BSD and chainloading evil hacks !! */ |
| bootdev = set_bootdev(0); |
| |
| if (!script) |
| { |
| init_page(); |
| init_cmdline(); |
| } |
| |
| restart: |
| if (script) |
| { |
| if (errnum) |
| { |
| if (fallback < 0) |
| goto returnit; |
| print_error(); |
| if (password || errnum == ERR_BOOT_COMMAND) |
| { |
| printf("Press any key to continue..."); |
| (void) getkey (); |
| returnit: |
| return CMDLINE_OK; |
| } |
| |
| run_cmdline = 1; |
| if (!have_run_cmdline) |
| { |
| have_run_cmdline = 1; |
| putchar('\n'); |
| init_cmdline(); |
| } |
| } |
| else |
| { |
| run_cmdline = 0; |
| |
| /* update position in the boot script */ |
| old_entry = cur_entry; |
| while (*(cur_entry++)); |
| |
| /* copy to work area */ |
| memmove (cur_heap, old_entry, ((int)cur_entry) - ((int)old_entry)); |
| |
| printf("%s\n", old_entry); |
| } |
| } |
| else |
| { |
| cur_heap[0] = 0; |
| print_error(); |
| } |
| |
| if (run_cmdline && get_cmdline (PACKAGE "> ", commands, cur_heap, 2048, 0)) |
| return CMDLINE_ERROR; |
| |
| if (substring("boot", cur_heap) == 0 || (script && !*cur_heap)) |
| { |
| if ((type == 'f') | (type == 'n')) |
| bsd_boot(type, bootdev); |
| if (type == 'l') |
| linux_boot(); |
| if (type == 'L') |
| big_linux_boot(); |
| |
| if (type == 'c') |
| { |
| gateA20(0); |
| boot_drive = saved_drive; |
| chain_stage1(0, BOOTSEC_LOCATION, BOOTSEC_LOCATION-16); |
| } |
| |
| if (!type) |
| { |
| errnum = ERR_BOOT_COMMAND; |
| goto restart; |
| } |
| |
| /* this is the final possibility */ |
| multi_boot((int)entry_addr, (int)(&mbi)); |
| } |
| |
| /* get clipped command-line */ |
| cur_cmdline = skip_to(1, cur_heap); |
| cmd_len = 0; |
| while (cur_cmdline[cmd_len++]); |
| |
| if (substring("chainloader", cur_heap) < 1) |
| { |
| if (grub_open (cur_cmdline) && |
| (grub_read ((char *) BOOTSEC_LOCATION, SECTOR_SIZE) == SECTOR_SIZE) && |
| (*((unsigned short *) (BOOTSEC_LOCATION+BOOTSEC_SIG_OFFSET)) |
| == BOOTSEC_SIGNATURE)) |
| type = 'c'; |
| else if (!errnum) |
| { |
| errnum = ERR_EXEC_FORMAT; |
| type = 0; |
| } |
| } |
| else if (substring("pause", cur_heap) < 1) |
| { |
| if (ASCII_CHAR (getkey ()) == 27) |
| return CMDLINE_ERROR; |
| } |
| else if (substring("uppermem", cur_heap) < 1) |
| { |
| if (safe_parse_maxint(&cur_cmdline, (int *)&(mbi.mem_upper))) |
| mbi.flags &= ~MB_INFO_MEM_MAP; |
| } |
| else if (substring("root", cur_heap) < 1) |
| { |
| int hdbias = 0; |
| char *next_cmd = set_device (cur_cmdline); |
| |
| if (next_cmd) |
| { |
| char *biasptr = skip_to (0, next_cmd); |
| |
| /* this will respond to any "rootn<XXX>" command, |
| but that's OK */ |
| if (!errnum && (cur_heap[4] == 'n' || open_device() |
| || errnum == ERR_FSYS_MOUNT)) |
| { |
| errnum = 0; |
| saved_partition = current_partition; |
| saved_drive = current_drive; |
| |
| if (cur_heap[4] != 'n') |
| { |
| /* BSD and chainloading evil hacks !! */ |
| safe_parse_maxint(&biasptr, &hdbias); |
| errnum = 0; |
| bootdev = set_bootdev(hdbias); |
| |
| print_fsys_type(); |
| } |
| else |
| current_drive = -1; |
| } |
| } |
| } |
| else if (substring("kernel", cur_heap) < 1) |
| { |
| /* make sure it's at the beginning of the boot heap area */ |
| memmove (heap, cur_heap, |
| cmd_len + (((int)cur_cmdline) - ((int)cur_heap))); |
| cur_cmdline = heap + (((int)cur_cmdline) - ((int)cur_heap)); |
| cur_heap = heap; |
| if ((type = load_image()) != 0) |
| cur_heap = cur_cmdline + cmd_len; |
| } |
| else if (substring("module", cur_heap) < 1) |
| { |
| if (type == 'm') |
| { |
| #ifndef NO_DECOMPRESSION |
| /* this will respond to any "modulen<XXX>" command, |
| but that's OK */ |
| if (cur_heap[6] == 'n') |
| no_decompression = 1; |
| #endif /* NO_DECOMPRESSION */ |
| |
| if (load_module()) |
| cur_heap = cur_cmdline + cmd_len; |
| |
| #ifndef NO_DECOMPRESSION |
| no_decompression = 0; |
| #endif /* NO_DECOMPRESSION */ |
| } |
| else if (type == 'L' || type == 'l') |
| { |
| load_initrd (); |
| } |
| else |
| errnum = ERR_NEED_MB_KERNEL; |
| } |
| else if (substring("initrd", cur_heap) < 1) |
| { |
| if (type == 'L' || type == 'l') |
| { |
| load_initrd (); |
| } |
| else |
| errnum = ERR_NEED_LX_KERNEL; |
| } |
| else if (substring("install", cur_heap) < 1) |
| { |
| char *stage1_file = cur_cmdline, *dest_dev, *file, *addr; |
| char buffer[SECTOR_SIZE], old_sect[SECTOR_SIZE]; |
| int new_drive = 0xFF; |
| |
| dest_dev = skip_to(0, stage1_file); |
| if (*dest_dev == 'd') |
| { |
| new_drive = 0; |
| dest_dev = skip_to(0, dest_dev); |
| } |
| file = skip_to (0, dest_dev); |
| addr = skip_to (0, file); |
| |
| if (safe_parse_maxint (&addr, &installaddr) && |
| grub_open (stage1_file) && |
| grub_read (buffer, SECTOR_SIZE) == SECTOR_SIZE && |
| set_device (dest_dev) && open_partition () && |
| devread (0, 0, SECTOR_SIZE, old_sect)) |
| { |
| int dest_drive = current_drive; |
| struct geometry dest_geom = buf_geom; |
| int dest_sector = part_start, i; |
| |
| #ifndef NO_DECOMPRESSION |
| no_decompression = 1; |
| #endif |
| |
| /* copy possible DOS BPB, 59 bytes at byte offset 3 */ |
| memmove (buffer+BOOTSEC_BPB_OFFSET, old_sect+BOOTSEC_BPB_OFFSET, |
| BOOTSEC_BPB_LENGTH); |
| |
| /* if for a hard disk, copy possible MBR/extended part table */ |
| if ((dest_drive & 0x80) && current_partition == 0xFFFFFF) |
| memmove (buffer+BOOTSEC_PART_OFFSET, old_sect+BOOTSEC_PART_OFFSET, |
| BOOTSEC_PART_LENGTH); |
| |
| if (*((short *)(buffer+STAGE1_VER_MAJ_OFFS)) != COMPAT_VERSION |
| || (*((unsigned short *) (buffer+BOOTSEC_SIG_OFFSET)) |
| != BOOTSEC_SIGNATURE) |
| || (!(dest_drive & 0x80) |
| && (*((unsigned char *) (buffer+BOOTSEC_PART_OFFSET)) == 0x80 |
| || buffer[BOOTSEC_PART_OFFSET] == 0))) |
| { |
| errnum = ERR_BAD_VERSION; |
| } |
| else if (grub_open (file)) |
| { |
| if (!new_drive) |
| new_drive = current_drive; |
| |
| memmove ((char*)BOOTSEC_LOCATION, buffer, SECTOR_SIZE); |
| |
| *((unsigned char *)(BOOTSEC_LOCATION+STAGE1_FIRSTLIST)) |
| = new_drive; |
| *((unsigned short *)(BOOTSEC_LOCATION+STAGE1_INSTALLADDR)) |
| = installaddr; |
| |
| i = BOOTSEC_LOCATION+STAGE1_FIRSTLIST-4; |
| while (*((unsigned long *)i)) |
| { |
| if (i < BOOTSEC_LOCATION+STAGE1_FIRSTLIST-256 |
| || (*((int *)(i-4)) & 0x80000000) |
| || *((unsigned short *)i) >= 0xA00 |
| || *((short *) (i+2)) == 0) |
| { |
| errnum = ERR_BAD_VERSION; |
| break; |
| } |
| |
| *((int *)i) = 0; |
| *((int *)(i-4)) = 0; |
| i -= 8; |
| } |
| |
| installlist = BOOTSEC_LOCATION+STAGE1_FIRSTLIST+4; |
| debug_fs = debug_fs_blocklist_func; |
| |
| if (!errnum && |
| grub_read ((char *) SCRATCHADDR, SECTOR_SIZE) == SECTOR_SIZE) |
| { |
| if (*((short *)(SCRATCHADDR+STAGE2_VER_MAJ_OFFS)) |
| != COMPAT_VERSION) |
| errnum = ERR_BAD_VERSION; |
| else |
| { |
| int write_stage2_sect = 0, stage2_sect = installsect; |
| char *ptr; |
| |
| ptr = skip_to(0, addr); |
| |
| if (*ptr == 'p') |
| { |
| write_stage2_sect++; |
| *((long *)(SCRATCHADDR+STAGE2_INSTALLPART)) |
| = current_partition; |
| ptr = skip_to(0, ptr); |
| } |
| if (*ptr) |
| { |
| char *str |
| = ((char *) (SCRATCHADDR+STAGE2_VER_STR_OFFS)); |
| |
| write_stage2_sect++; |
| while (*(str++)); /* find string */ |
| while ((*(str++) = *(ptr++)) != 0); /* do copy */ |
| } |
| |
| grub_read ((char *) RAW_ADDR (0x100000), -1); |
| |
| buf_track = -1; |
| |
| if (!errnum |
| && (biosdisk(BIOSDISK_WRITE, |
| dest_drive, &dest_geom, |
| dest_sector, 1, (BOOTSEC_LOCATION>>4)) |
| || (write_stage2_sect |
| && biosdisk(BIOSDISK_WRITE, |
| current_drive, &buf_geom, |
| stage2_sect, 1, SCRATCHSEG)))) |
| errnum = ERR_WRITE; |
| } |
| } |
| |
| debug_fs = NULL; |
| } |
| |
| #ifndef NO_DECOMPRESSION |
| no_decompression = 0; |
| #endif |
| } |
| |
| /* Error running the install script, so drop to command line. */ |
| if (script) |
| { |
| fallback = -1; |
| return CMDLINE_ERROR; |
| } |
| } |
| else if (substring("testload", cur_heap) < 1) |
| { |
| type = 0; |
| if (grub_open (cur_cmdline)) |
| { |
| int i; |
| |
| debug_fs = debug_fs_print_func; |
| |
| /* |
| * Perform filesystem test on the specified file. |
| */ |
| |
| /* read whole file first */ |
| printf("Whole file: "); |
| |
| grub_read ((char *) RAW_ADDR (0x100000), -1); |
| |
| /* now compare two sections of the file read differently */ |
| |
| for (i = 0; i < 0x10ac0; i++) |
| { |
| *((unsigned char *) RAW_ADDR (0x200000+i)) = 0; |
| *((unsigned char *) RAW_ADDR (0x300000+i)) = 1; |
| } |
| |
| /* first partial read */ |
| printf("\nPartial read 1: "); |
| |
| filepos = 0; |
| grub_read ((char *) RAW_ADDR (0x200000), 0x7); |
| grub_read ((char *) RAW_ADDR (0x200007), 0x100); |
| grub_read ((char *) RAW_ADDR (0x200107), 0x10); |
| grub_read ((char *) RAW_ADDR (0x200117), 0x999); |
| grub_read ((char *) RAW_ADDR (0x200ab0), 0x10); |
| grub_read ((char *) RAW_ADDR (0x200ac0), 0x10000); |
| |
| /* second partial read */ |
| printf("\nPartial read 2: "); |
| |
| filepos = 0; |
| grub_read ((char *) RAW_ADDR (0x300000), 0x10000); |
| grub_read ((char *) RAW_ADDR (0x310000), 0x10); |
| grub_read ((char *) RAW_ADDR (0x310010), 0x7); |
| grub_read ((char *) RAW_ADDR (0x310017), 0x10); |
| grub_read ((char *) RAW_ADDR (0x310027), 0x999); |
| grub_read ((char *) RAW_ADDR (0x3109c0), 0x100); |
| |
| printf ("\nHeader1 = 0x%x, next = 0x%x, next = 0x%x, next = 0x%x\n", |
| *((int *) RAW_ADDR (0x200000)), |
| *((int *) RAW_ADDR (0x200004)), |
| *((int *) RAW_ADDR (0x200008)), |
| *((int *) RAW_ADDR (0x20000c))); |
| |
| printf ("Header2 = 0x%x, next = 0x%x, next = 0x%x, next = 0x%x\n", |
| *((int *) RAW_ADDR (0x300000)), |
| *((int *) RAW_ADDR (0x300004)), |
| *((int *) RAW_ADDR (0x300008)), |
| *((int *) RAW_ADDR (0x30000c))); |
| |
| for (i = 0; i < 0x10ac0 && *((unsigned char *) RAW_ADDR (0x200000+i)) |
| == *((unsigned char *) RAW_ADDR (0x300000+i)); i++); |
| |
| printf("Max is 0x10ac0: i=0x%x, filepos=0x%x\n", i, filepos); |
| |
| debug_fs = NULL; |
| } |
| } |
| else if (substring ("read", cur_heap) < 1) |
| { |
| int myaddr; |
| if (safe_parse_maxint (&cur_cmdline, &myaddr)) |
| printf ("Address 0x%x: Value 0x%x", |
| myaddr, *((unsigned *) RAW_ADDR (myaddr))); |
| } |
| else if (substring ("fstest", cur_heap) == 0) |
| { |
| if (debug_fs) |
| { |
| debug_fs = NULL; |
| printf (" Filesystem tracing is now off\n"); |
| } |
| else |
| { |
| debug_fs = debug_fs_print_func; |
| printf (" Filesystem tracing is now on\n"); |
| } |
| } |
| else if (substring ("impsprobe", cur_heap) == 0) |
| { |
| #ifndef GRUB_UTIL |
| if (!imps_probe ()) |
| #endif |
| printf (" No MPS information found or probe failed\n"); |
| } |
| else if (substring ("displaymem", cur_heap) == 0) |
| { |
| if (get_eisamemsize () != -1) |
| printf (" EISA Memory BIOS Interface is present\n"); |
| if (get_mmap_entry ((void *) SCRATCHADDR, 0) != 0 || |
| *((int *) SCRATCHADDR) != 0) |
| printf (" Address Map BIOS Interface is present\n"); |
| |
| printf (" Lower memory: %uK, Upper memory (to first chipset hole): %uK\n", |
| mbi.mem_lower, mbi.mem_upper); |
| |
| if (mbi.flags & MB_INFO_MEM_MAP) |
| { |
| struct AddrRangeDesc *map = (struct AddrRangeDesc *) mbi.mmap_addr; |
| int end_addr = mbi.mmap_addr + mbi.mmap_length; |
| |
| printf (" [Address Range Descriptor entries immediately follow (values are 64-bit)]\n"); |
| while (end_addr > (int) map) |
| { |
| char *str; |
| |
| if (map->Type == MB_ARD_MEMORY) |
| str = "Usable RAM"; |
| else |
| str = "Reserved"; |
| printf (" %s: Base Address: 0x%x X 4GB + 0x%x, |
| Length: %u X 4GB + %u bytes\n", |
| str, map->BaseAddrHigh, map->BaseAddrLow, |
| map->LengthHigh, map->LengthLow); |
| |
| map = ((struct AddrRangeDesc *) (((int) map) + 4 + map->size)); |
| } |
| } |
| } |
| else if (substring ("makeactive", cur_heap) == 0) |
| make_saved_active(); |
| else if (substring ("debug", cur_heap) == 0) |
| { |
| if (debug) |
| { |
| debug = 0; |
| grub_printf (" Debug mode is turned off\n"); |
| } |
| else |
| { |
| debug = 1; |
| grub_printf (" Debug mode is turned on\n"); |
| } |
| } |
| else if (substring ("color", cur_heap) < 1) |
| { |
| char *normal; |
| char *highlight; |
| |
| normal = cur_cmdline; |
| highlight = skip_to (0, normal); |
| |
| if (safe_parse_maxint (&normal, &normal_color)) |
| { |
| /* The second argument is optional, so set highlight_color |
| to inverted NORMAL_COLOR. */ |
| if (*highlight == 0 |
| || ! safe_parse_maxint (&highlight, &highlight_color)) |
| highlight_color = ((normal_color >> 4) |
| | ((normal_color & 0xf) << 4)); |
| } |
| } |
| else if (substring ("quit", cur_heap) < 1) |
| { |
| #ifdef GRUB_UTIL |
| return CMDLINE_ABORT; |
| #else |
| grub_printf (" The quit command is ignored in Stage2\n"); |
| #endif |
| } |
| else if (*cur_heap && *cur_heap != ' ') |
| errnum = ERR_UNRECOGNIZED; |
| |
| goto restart; |
| } |