depcomp - grub4dos-solaris - Rivoreo Source Code Repositories

 #! /bin/sh

 # depcomp - compile a program generating dependencies as side-effects
 # Copyright (C) 1999 Free Software Foundation, Inc.

 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
 # the Free Software Foundation; either version 2, or (at your option)
 # any later version.

 # This program is distributed in the hope that it will be useful,
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.

 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
 # 02111-1307, USA.

 # Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.

 if test -z "$depmode" || test -z "$source" || test -z "$object"; then
   echo "depcomp: Variables source, object and depmode must be set" 1>&2
   exit 1
 fi
 # `libtool' can also be set to `yes' or `no'.

 depfile=${depfile-`echo "$object" | sed 's,\([^/]*\)$,.deps/\1,;s/\.\([^.]*\)$/.P\1/'`}
 tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}

 rm -f "$tmpdepfile"

 # Some modes work just like other modes, but use different flags.  We
 # parameterize here, but still list the modes in the big case below,
 # to make depend.m4 easier to write.  Note that we *cannot* use a case
 # here, because this file can only contain one case statement.
 if test "$depmode" = hp; then
   # HP compiler uses -M and no extra arg.
   gccflag=-M
   depmode=gcc
 fi

 if test "$depmode" = dashXmstdout; then
    # This is just like dashmstdout with a different argument.
    dashmflag=-xM
    depmode=dashmstdout
 fi

 case "$depmode" in
 gcc)
 ## There are various ways to get dependency output from gcc.  Here's
 ## why we pick this rather obscure method:
 ## - Don't want to use -MD because we'd like the dependencies to end
 ##   up in a subdir.  Having to rename by hand is ugly.
 ##   (We might end up doing this anyway to support other compilers.)
 ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
 ##   -MM, not -M (despite what the docs say).
 ## - Using -M directly means running the compiler twice (even worse
 ##   than renaming).
   if test -z "$gccflag"; then
     gccflag=-MD,
   fi
   if "$@" -Wp,"$gccflag$tmpdepfile"; then :
   else
     stat=$?
     rm -f "$tmpdepfile"
     exit $stat
   fi
   rm -f "$depfile"
   echo "$object : \\" > "$depfile"
   sed 's/^[^:]*: / /' < "$tmpdepfile" >> "$depfile"
 ## This next piece of magic avoids the `deleted header file' problem.
 ## The problem is that when a header file which appears in a .P file
 ## is deleted, the dependency causes make to die (because there is
 ## typically no way to rebuild the header).  We avoid this by adding
 ## dummy dependencies for each header file.  Too bad gcc doesn't do
 ## this for us directly.
   tr ' ' '
 ' < "$tmpdepfile" |
 ## Some versions of gcc put a space before the `:'.  On the theory
 ## that the space means something, we add a space to the output as
 ## well.
 ## Some versions of the HPUX 10.20 sed can't process this invocation
 ## correctly.  Breaking it into two sed invocations is a workaround.
     sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;

 hp)
   # This case exists only to let depend.m4 do its work.  It works by
   # looking at the text of this script.  This case will never be run,
   # since it is checked for above.
   exit 1
   ;;

 dashmd)
   # The Java front end to gcc doesn't run cpp, so we can't use the -Wp
   # trick.  Instead we must use -M and then rename the resulting .d
   # file.  This is also the case for older versions of gcc, which
   # don't implement -Wp.
   if "$@" -MD; then :
   else
     stat=$?
     rm -f FIXME
     exit $stat
   fi
   FIXME: rewrite the file
   ;;

 sgi)
   if test "$libtool" = yes; then
     "$@" "-Wc,-MDupdate,$tmpdepfile"
   else
     "$@" -MDupdate "$tmpdepfile"
   fi
   stat=$?
   if test $stat -eq 0; then :
   else
     stat=$?
     rm -f "$tmpdepfile"
     exit $stat
   fi
   rm -f "$depfile"
   echo "$object : \\" > "$depfile"
   sed 's/^[^:]*: / /' < "$tmpdepfile" >> "$depfile"
   tr ' ' '
 ' < "$tmpdepfile" | \
 ## Some versions of the HPUX 10.20 sed can't process this invocation
 ## correctly.  Breaking it into two sed invocations is a workaround.
     sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;

 #nosideeffect)
   # This comment above is used by automake to tell side-effect
   # dependency tracking mechanisms from slower ones.

 dashmstdout)
   # Important note: in order to support this mode, a compiler *must*
   # always write the proprocessed file to stdout, regardless of -o,
   # because we must use -o when running libtool.
   test -z "$dashmflag" && dashmflag=-M
   ( IFS=" "
     case " $* " in
     *" --mode=compile "*) # this is libtool, let us make it quiet
       for arg
       do # cycle over the arguments
         case "$arg" in
 	"--mode=compile")
 	  # insert --quiet before "--mode=compile"
 	  set fnord "$@" --quiet
 	  shift # fnord
 	  ;;
 	esac
 	set fnord "$@" "$arg"
 	shift # fnord
 	shift # "$arg"
       done
       ;;
     esac
     "$@" $dashmflag | sed 's:^[^:]*\:[ 	]*:'"$object"'\: :' > "$tmpdepfile"
   ) &
   proc=$!
   "$@"
   stat=$?
   wait "$proc"
   if test "$stat" != 0; then exit $stat; fi
   rm -f "$depfile"
   cat < "$tmpdepfile" > "$depfile"
   tr ' ' '
 ' < "$tmpdepfile" | \
 ## Some versions of the HPUX 10.20 sed can't process this invocation
 ## correctly.  Breaking it into two sed invocations is a workaround.
     sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;

 dashXmstdout)
   # This case only exists to satisfy depend.m4.  It is never actually
   # run, as this mode is specially recognized in the preamble.
   exit 1
   ;;

 makedepend)
   # X makedepend
   (
     shift
     cleared=no
     for arg in "$@"; do
       case $cleared in no)
         set ""; shift
 	cleared=yes
       esac
       case "$arg" in
         -D*|-I*)
 	  set fnord "$@" "$arg"; shift;;
 	-*)
 	  ;;
 	*)
 	  set fnord "$@" "$arg"; shift;;
       esac
     done
     obj_suffix="`echo $object | sed 's/^.*\././'`"
     touch "$tmpdepfile"
     ${MAKEDEPEND-makedepend} 2>/dev/null -o"$obj_suffix" -f"$tmpdepfile" "$@"
   ) &
   proc=$!
   "$@"
   stat=$?
   wait "$proc"
   if test "$stat" != 0; then exit $stat; fi
   rm -f "$depfile"
   cat < "$tmpdepfile" > "$depfile"
   tail +3 "$tmpdepfile" | tr ' ' '
 ' | \
 ## Some versions of the HPUX 10.20 sed can't process this invocation
 ## correctly.  Breaking it into two sed invocations is a workaround.
     sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile" "$tmpdepfile".bak
   ;;

 cpp)
   # Important note: in order to support this mode, a compiler *must*
   # always write the proprocessed file to stdout, regardless of -o,
   # because we must use -o when running libtool.
   ( IFS=" "
     case " $* " in
     *" --mode=compile "*)
       for arg
       do # cycle over the arguments
         case "$arg" in
 	"--mode=compile")
 	  # insert --quiet before "--mode=compile"
 	  set fnord "$@" --quiet
 	  shift # fnord
 	  ;;
 	esac
 	set fnord "$@" "$arg"
 	shift # fnord
 	shift # "$arg"
       done
       ;;
     esac
     "$@" -E |
     sed -n '/^# [0-9][0-9]* "\([^"]*\)"/ s::'"$object"'\: \1:p' > "$tmpdepfile"
   ) &
   proc=$!
   "$@"
   stat=$?
   wait "$proc"
   if test "$stat" != 0; then exit $stat; fi
   rm -f "$depfile"
   cat < "$tmpdepfile" > "$depfile"
   sed < "$tmpdepfile" -e 's/^[^:]*: //' -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;

 none)
   exec "$@"
   ;;

 *)
   echo "Unknown depmode $depmode" 1>&2
   exit 1
   ;;
 esac

 exit 0
	#! /bin/sh

	# depcomp - compile a program generating dependencies as side-effects
	# Copyright (C) 1999 Free Software Foundation, Inc.

	# This program is free software; you can redistribute it and/or modify
	# it under the terms of the GNU General Public License as published by
	# the Free Software Foundation; either version 2, or (at your option)
	# any later version.

	# This program is distributed in the hope that it will be useful,
	# but WITHOUT ANY WARRANTY; without even the implied warranty of
	# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	# GNU General Public License for more details.

	# You should have received a copy of the GNU General Public License
	# along with this program; if not, write to the Free Software
	# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
	# 02111-1307, USA.

	# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.

	if test -z "$depmode" \|\| test -z "$source" \|\| test -z "$object"; then
	echo "depcomp: Variables source, object and depmode must be set" 1>&2
	exit 1
	fi
	# `libtool' can also be set to `yes' or `no'.

	depfile=${depfile-`echo "$object" \| sed 's,\([^/]\)$,.deps/\1,;s/\.\([^.]\)$/.P\1/'`}
	tmpdepfile=${tmpdepfile-`echo "$depfile" \| sed 's/\.\([^.]*\)$/.T\1/'`}

	rm -f "$tmpdepfile"

	# Some modes work just like other modes, but use different flags. We
	# parameterize here, but still list the modes in the big case below,
	# to make depend.m4 easier to write. Note that we cannot use a case
	# here, because this file can only contain one case statement.
	if test "$depmode" = hp; then
	# HP compiler uses -M and no extra arg.
	gccflag=-M
	depmode=gcc
	fi

	if test "$depmode" = dashXmstdout; then
	# This is just like dashmstdout with a different argument.
	dashmflag=-xM
	depmode=dashmstdout
	fi

	case "$depmode" in
	gcc)
	## There are various ways to get dependency output from gcc. Here's
	## why we pick this rather obscure method:
	## - Don't want to use -MD because we'd like the dependencies to end
	## up in a subdir. Having to rename by hand is ugly.
	## (We might end up doing this anyway to support other compilers.)
	## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
	## -MM, not -M (despite what the docs say).
	## - Using -M directly means running the compiler twice (even worse
	## than renaming).
	if test -z "$gccflag"; then
	gccflag=-MD,
	fi
	if "$@" -Wp,"$gccflag$tmpdepfile"; then :
	else
	stat=$?
	rm -f "$tmpdepfile"
	exit $stat
	fi
	rm -f "$depfile"
	echo "$object : \\" > "$depfile"
	sed 's/^[^:]*: / /' < "$tmpdepfile" >> "$depfile"
	## This next piece of magic avoids the `deleted header file' problem.
	## The problem is that when a header file which appears in a .P file
	## is deleted, the dependency causes make to die (because there is
	## typically no way to rebuild the header). We avoid this by adding
	## dummy dependencies for each header file. Too bad gcc doesn't do
	## this for us directly.
	tr ' ' '
	' < "$tmpdepfile" \|
	## Some versions of gcc put a space before the `:'. On the theory
	## that the space means something, we add a space to the output as
	## well.
	## Some versions of the HPUX 10.20 sed can't process this invocation
	## correctly. Breaking it into two sed invocations is a workaround.
	sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \| sed -e 's/$/ :/' >> "$depfile"
	rm -f "$tmpdepfile"
	;;

	hp)
	# This case exists only to let depend.m4 do its work. It works by
	# looking at the text of this script. This case will never be run,
	# since it is checked for above.
	exit 1
	;;

	dashmd)
	# The Java front end to gcc doesn't run cpp, so we can't use the -Wp
	# trick. Instead we must use -M and then rename the resulting .d
	# file. This is also the case for older versions of gcc, which
	# don't implement -Wp.
	if "$@" -MD; then :
	else
	stat=$?
	rm -f FIXME
	exit $stat
	fi
	FIXME: rewrite the file
	;;

	sgi)
	if test "$libtool" = yes; then
	"$@" "-Wc,-MDupdate,$tmpdepfile"
	else
	"$@" -MDupdate "$tmpdepfile"
	fi
	stat=$?
	if test $stat -eq 0; then :
	else
	stat=$?
	rm -f "$tmpdepfile"
	exit $stat
	fi
	rm -f "$depfile"
	echo "$object : \\" > "$depfile"
	sed 's/^[^:]*: / /' < "$tmpdepfile" >> "$depfile"
	tr ' ' '
	' < "$tmpdepfile" \| \
	## Some versions of the HPUX 10.20 sed can't process this invocation
	## correctly. Breaking it into two sed invocations is a workaround.
	sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \| sed -e 's/$/ :/' >> "$depfile"
	rm -f "$tmpdepfile"
	;;

	#nosideeffect)
	# This comment above is used by automake to tell side-effect
	# dependency tracking mechanisms from slower ones.

	dashmstdout)
	# Important note: in order to support this mode, a compiler must
	# always write the proprocessed file to stdout, regardless of -o,
	# because we must use -o when running libtool.
	test -z "$dashmflag" && dashmflag=-M
	( IFS=" "
	case " $* " in
	" --mode=compile ") # this is libtool, let us make it quiet
	for arg
	do # cycle over the arguments
	case "$arg" in
	"--mode=compile")
	# insert --quiet before "--mode=compile"
	set fnord "$@" --quiet
	shift # fnord
	;;
	esac
	set fnord "$@" "$arg"
	shift # fnord
	shift # "$arg"
	done
	;;
	esac
	"$@" $dashmflag \| sed 's:^[^:]\:[ ]:'"$object"'\: :' > "$tmpdepfile"
	) &
	proc=$!
	"$@"
	stat=$?
	wait "$proc"
	if test "$stat" != 0; then exit $stat; fi
	rm -f "$depfile"
	cat < "$tmpdepfile" > "$depfile"
	tr ' ' '
	' < "$tmpdepfile" \| \
	## Some versions of the HPUX 10.20 sed can't process this invocation
	## correctly. Breaking it into two sed invocations is a workaround.
	sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \| sed -e 's/$/ :/' >> "$depfile"
	rm -f "$tmpdepfile"
	;;

	dashXmstdout)
	# This case only exists to satisfy depend.m4. It is never actually
	# run, as this mode is specially recognized in the preamble.
	exit 1
	;;

	makedepend)
	# X makedepend
	(
	shift
	cleared=no
	for arg in "$@"; do
	case $cleared in no)
	set ""; shift
	cleared=yes
	esac
	case "$arg" in
	-D\|-I)
	set fnord "$@" "$arg"; shift;;
	-*)
	;;
	*)
	set fnord "$@" "$arg"; shift;;
	esac
	done
	obj_suffix="`echo $object \| sed 's/^.*\././'`"
	touch "$tmpdepfile"
	${MAKEDEPEND-makedepend} 2>/dev/null -o"$obj_suffix" -f"$tmpdepfile" "$@"
	) &
	proc=$!
	"$@"
	stat=$?
	wait "$proc"
	if test "$stat" != 0; then exit $stat; fi
	rm -f "$depfile"
	cat < "$tmpdepfile" > "$depfile"
	tail +3 "$tmpdepfile" \| tr ' ' '
	' \| \
	## Some versions of the HPUX 10.20 sed can't process this invocation
	## correctly. Breaking it into two sed invocations is a workaround.
	sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \| sed -e 's/$/ :/' >> "$depfile"
	rm -f "$tmpdepfile" "$tmpdepfile".bak
	;;

	cpp)
	# Important note: in order to support this mode, a compiler must
	# always write the proprocessed file to stdout, regardless of -o,
	# because we must use -o when running libtool.
	( IFS=" "
	case " $* " in
	" --mode=compile ")
	for arg
	do # cycle over the arguments
	case "$arg" in
	"--mode=compile")
	# insert --quiet before "--mode=compile"
	set fnord "$@" --quiet
	shift # fnord
	;;
	esac
	set fnord "$@" "$arg"
	shift # fnord
	shift # "$arg"
	done
	;;
	esac
	"$@" -E \|
	sed -n '/^# [0-9][0-9]* "\([^"]*\)"/ s::'"$object"'\: \1:p' > "$tmpdepfile"
	) &
	proc=$!
	"$@"
	stat=$?
	wait "$proc"
	if test "$stat" != 0; then exit $stat; fi
	rm -f "$depfile"
	cat < "$tmpdepfile" > "$depfile"
	sed < "$tmpdepfile" -e 's/^[^:]*: //' -e 's/$/ :/' >> "$depfile"
	rm -f "$tmpdepfile"
	;;

	none)
	exec "$@"
	;;

	*)
	echo "Unknown depmode $depmode" 1>&2
	exit 1
	;;
	esac

	exit 0