| 1999-05-02 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp> |
| |
| * shared_src/asm.S (biosdisk_standard): Pop %ebp correctly, reported |
| by Pavel Roskin <pavel_roskin@geocities.com>. |
| |
| 1999-04-25 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp> |
| |
| * docs/menu.lst: Rewritten, so that it contains up-to-date |
| information and FAQish configuration examples. |
| |
| 1999-04-09 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp> |
| |
| * shared_src/asm.S (get_diskinfo_floppy): Correct the number of heads |
| and the one of cylinders. |
| |
| 1999-04-06 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp> |
| |
| * grub/asmstub.c (get_diskinfo): Compute the total number of sectors |
| for DRIVE. |
| |
| * shared_src/asm.S (get_diskinfo_standard): Clear the data segment |
| after calling int 0x13. Restore the base pointer after returning |
| to protected mode. |
| (get_diskinfo_floppy): Likewise. |
| |
| * shared_src/bios.c (get_diskinfo): Always set the size of DRP to |
| the max size of DRP, regardless of the major version of extensions. |
| |
| 1999-04-03 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp> |
| |
| * shared_src/shared.h (struct geometry): Declare total_sectors as |
| unsigned long instead of unsigned long long, because GRUB represents |
| a sector number by 4bytes integer, so it doesn't make sense. |
| |
| * shared_src/bios.c (biosdisk) [!NO_INT13_FALLBACK]: Recompute |
| TOTAL_SECTORS according to CHS information. |
| (get_diskinfo) [DEBUG]: Print the geometry of DRIVE. |
| |
| * shared_src/disk_io.c (real_open_partition): Set PART_LENGTH to |
| BUF_GEOM.TOTAL_SECTORS. |
| |
| 1999-04-01 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp> |
| |
| * docs/texinfo.tex: Copied from automake-1.4a. |
| |
| * configure.in (SHARED_SRC_RULES): Add bios into shared sources. |
| |
| * e2fs_stage1_5/Makefile.am (e2fs_stage1_5_exec_LDADD): Added bios.o. |
| * fat_stage1_5/Makefile.am (fat_stage1_5_exec_LDADD): Likewise. |
| * ffs_stage1_5/Makefile.am (ffs_stage1_5_exec_LDADD): Likewise. |
| * stage2/Makefile.am (stage2_exec_LDADD): Likewise. |
| * stage2_debug/Makefile.am (stage2_debug_exec_LDADD): Likewise. |
| |
| * shared_src/Makefile.am (EXTRA_DIST): Added bios.c. |
| |
| * shared_src/asm.S (biosdisk): Deleted. Now defined in bios.c. |
| (get_diskinfo): Likewise. |
| (biosdisk_int13_extensions): New function. |
| (biosdisk_standard): Likewise. |
| (check_int13_extensions): Likewise. |
| (get_diskinfo_int13_extensions): Likewise. |
| (get_diskinfo_standard): Likewise. |
| (get_diskinfo_floppy): Likewise. |
| |
| * shared_src/bios.c: New file. |
| |
| * shared_src/shared.h (struct geometry): Added new member, |
| total_sectors. |
| |
| 1999-03-28 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp> |
| |
| * shared_src/stage2.c (print_entries): Correctly assign MENU_ENTRIES |
| the entries starting from FIRST. |
| |
| 1999-03-27 Gordon Matzigkeit <gord@trick.fig.org> |
| |
| * Change everything to use memset and memmove instead of bzero and |
| bcopy. GNB's Not BSD. |
| |
| * shared_src/shared.h (grub_memset): Adapted from grub_bzero. |
| (grub_memmove): Adapted from grub_bcopy. |
| |
| * grub/asmstub.c (checkkey): Fix unterminated comment. |
| |
| * shared_src/char_io.c (grub_printf): Renamed from printf. |
| (grub_tolower): Renamed from tolower. |
| (grub_isspace): Renamed from isspace. |
| (grub_strncat): Renamed from strncat. |
| (grub_strstr): Renamed from strstr. |
| (grub_bcopy): Renamed from bcopy. |
| (grub_bzero): Renamed from bzero. |
| |
| From Bradford Hovinen: |
| * shared_src/char_io.c (get_cmdline): Add new argument to hide |
| password entry. |
| (grub_strcmp): New function. |
| * shared_src/shared.h (get_cmdline): Fix declaration. |
| (grub_strcmp): Declare. |
| * shared_src/stage2.c (run_menu): Use get_cmdline with an |
| ECHO_CHAR of `*'. This protects against both brute-force and |
| sidelong-glance password cracking attempts. |
| |
| * grub/main.c (usage): Display defaults for stage2 options. |
| |
| * grub/asmstub.c [WITHOUT_LIBC_STUBS]: Renamed from |
| NO_REMAPPING_LIBC_FUNCTIONS. |
| * grub/main.c: Likewise. |
| * shared_src/shared.h: Likewise. |
| |
| 1999-03-27 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp> |
| |
| * grub/asmstub.c (set_attrib): Use inch and addch, instead of |
| chgat, because chgat doesn't work as expected. |
| |
| 1999-03-26 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp> |
| |
| * grub/asmstub.c (grub_stage2) [HAVE_LIBCURSES]: Call nodelay. |
| (checkkey) [HAVE_LIBCURSES]: If getting an input character, then |
| ungetch it, because checkkey shouldn't modify the input queue. |
| |
| Use file descriptors instead of file pointers to support |
| >4GB disks in Linux. |
| |
| * grub/asmstub.c (grub_stage2): Call close instead of fclose. |
| (get_diskinfo): Call open instead of fopen. |
| (biosdisk) [__linux__]: Use _llseek instead of lseek. |
| (biosdisk): Call read instead of fread. |
| |
| Add options so that the user can specify the config file. |
| |
| * grub/Makefile.am (CPPFLAGS): Use -fwritable-strings, because |
| grub assumes that all strings resides at the data section. |
| |
| * grub/main.c: Define NO_REMAPPING_LIBC_FUNCTIONS before including |
| shared.h. |
| (OPT_CONFIG_FILE): New macro. |
| (OPT_INSTALL_PARTITION): Likewise. |
| (OPT_BOOT_DRIVE): Likewise. |
| (longopts): Add new options, config-file, install-partition and |
| boot-drive. |
| (usage): Add the documentation for them. |
| (main): Add handling code for OPT_CONFIG_FILE, OPT_INSTALL_PARTITION |
| and OPT_BOOT_DRIVE. |
| |
| * grub/asmstub.c: Define NO_REMAPPING_LIBC_FUNCTIONS before including |
| shared.h. |
| (config_file): Make it char * instead of char []. |
| (getrtsecs): Return current time instead of 0xff. |
| |
| * shared_src/shared.h [NO_REMAPPING_LIBC_FUNCTIONS]: Don't define |
| libc-API-compatible function names. |
| (config_file): Change the prototype from char [] to char *. |
| (grub_putchar): Renamed from putchar. |
| |
| 1999-03-25 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp> |
| |
| * char_io.c (get_cmdline): Call cl_setcpos even if lpos == llen, |
| because ncurses won't update the cursor position. |
| |
| * grub/main.c (OPT_HOLD): New macro. |
| (longopts): New option --hold. |
| (usage): Add the documentation about --hold. |
| (main): Set hold if --hold is specified. Wait until cleared. |
| |
| 1999-03-22 Gordon Matzigkeit <gord@trick.fig.org> |
| |
| * shared_src/cmdline.c (enter_cmdline): Check the return value of |
| set_device in the `root' command. |
| |
| * shared_src/char_io.c (memcheck): Special-case cur_part_desc and |
| reenable memory checking. |
| |
| 1999-03-21 Gordon Matzigkeit <gord@trick.fig.org> |
| |
| * shared_src/boot.c (load_image): Make sure we use the mapped |
| address before actually writing data to memaddr. |
| |
| * shared_src/char_io.c (get_cmdline): Only zero-terminate if there |
| were leading blanks. This prevents accidental truncation of |
| commands. |
| |
| * grub/asmstub.c (get_diskinfo): Cache device geometries as well |
| as file handles. |
| Use the Linux HDIO_GETGEO ioctl to make a better guess at hard |
| disk geometries. |
| |
| 1999-03-16 Gordon Matzigkeit <gord@trick.fig.org> |
| |
| * shared_src/shared.h (geometry_t): Delete typedef, until we |
| actually use it. |
| |
| 1999-03-16 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp> |
| |
| * shared_src/asm.S (biosdisk): Use a structure for geometry |
| instead of a integer. |
| (get_diskinfo): Take a pointer to a geometry structure as the |
| second argument, and fill a geometry in it. Return 1 if an error |
| occurs, otherwise return 0. |
| * shared_src/boot.c (bsd_boot): Compute BIOS geometries for BSD. |
| * shared_src/cmdline.c (enter_cmdline): Declare dest_geom as |
| struct geometry. |
| * shared_src/disk_io.c (buf_geom): Declare as struct geometry. |
| * shared_src/filesys.h (SECTORS): Deleted. |
| (HEADS): Likewise. |
| (CYLINDERS): Likewise. |
| * shared_src/shared.h (BIOSDISK_FLAG_LBA_EXTENSION): New macro. |
| (struct geometry): New structure. |
| (buf_geom): Correct the prototype. |
| (get_diskinfo): Likewise. |
| (biosdisk): Likewise. |
| |
| 1999-03-15 Gordon Matzigkeit <gord@trick.fig.org> |
| |
| * grub/asmstub.c (doit): Nested function to get a clean stack |
| frame while in grub_stage2. |
| Use different assembler magic. From OKUJI Yoshinori. |
| |
| 1999-03-14 Gordon Matzigkeit <gord@trick.fig.org> |
| |
| * shared_src/stage2.c (run_menu): Use A_REVERSE and A_NORMAL |
| constants instead of magic numbers. |
| |
| * shared_src/shared.h (A_REVERSE): Renamed from ATTR_INVERSE for |
| compatibility with curses. |
| (A_NORMAL): Renamed from ATTR_NORMAL. |
| |
| * shared_src/cmdline.c (enter_cmdline): Change prompt to "grub> ". |
| (enter_cmdline): Only abort the boot if we are in a script. |
| |
| * shared_src/stage2.c (run_menu): Change prompts to "grub edit> ". |
| |
| * shared_src/char_io.c (memcheck): Use RAW_ADDR to compute memory |
| locations. |
| (get_cmdline): Change the `goto next line' code to account for |
| newlines deleting to end of line under curses. |
| |
| * Innumerable cleanups to fix warnings. There are still too many |
| typecasts in the wrong places (int variables used to hold |
| pointers, then casted to a pointer type), but things look better. |
| |
| * configure.in (CPPFLAGS): Bump up GCC warnings to -Wall |
| -Wmissing-prototypes -Wunused. |
| |
| * shared_src/shared.h: Delete stupid declarations, and totally |
| rearrange for clarity. |
| (inb, outb): Move to cmdline.c, since it's only used there. |
| (print_possibilities, fsmax, fsys_table): Move definitions to |
| disk_io.c. |
| |
| * grub/asmstub.c: Fill in more stubs. |
| |
| 1999-03-13 Gordon Matzigkeit <gord@trick.fig.org> |
| |
| * shared_src/gunzip.c (border): Rename to bitorder, to resolve |
| clash with curses. |
| * shared_src/stage2.c (timeout): Rename to grub_timeout. |
| |
| * configure.in: Check for curses libraries for use with |
| /sbin/grub. |
| |
| * shared_src/shared.h (KEY_DELETE): Rename to KEY_DC, for |
| compatibility with curses. |
| (KEY_INSERT): Rename to KEY_IC. |
| (KEY_PGDN): Rename to KEY_NPAGE. |
| (KEY_PGUP): Rename to KEY_PPAGE. |
| |
| * shared_src/asm.S (asm_getkey): Renamed to getkey. |
| |
| * shared_src/char_io.c (getkey): Delete, because it's useless. |
| |
| * shared_src/shared.h: Resolve name clashes with libc by renaming |
| overlapping functions to have grub_ prefixes, then defining |
| macros. |
| |
| * grub/asmstub.c (start_stage2): Make some assertions about our |
| scratch memory area. |
| |
| * shared_src/shared.h (end): Delete declaration. |
| (RAW_ADDR, RAW_SEG): Macros to redirect /sbin/grub memory requests |
| through grub_scratch_mem. |
| |
| * grub/asmstub.c (get_mem_map): Implement, simulating 4MB |
| contiguous memory. |
| (get_code_end): Implement, simulating with a malloced area. |
| grub/asmstub.c (start_stage2): Initialize grub_scratch_mem. |
| |
| * shared_src/asm.S (get_mem_map): Some BIOSes expect the high word |
| of %eax to be zero. |
| (get_code_end): Move this from common.c so that we can stub it out |
| in the simulator. |
| |
| * debian/rules: Make sure info files end up in /usr/info, not |
| /info. |
| |
| 1999-03-10 Gordon Matzigkeit <gord@trick.fig.org> |
| |
| * shared_src/asm.S (biosdisk): Make LBA mode work correctly. From |
| OKUJI Yoshinori. |
| Unconditionally define NO_INT13_FALLBACK until we release GRUB |
| 0.6. This will help debug any problems with the LBA support until |
| then. |
| |
| 1999-03-09 Gordon Matzigkeit <gord@trick.fig.org> |
| |
| * shared_src/asm.S (biosdisk): Compute location of |
| disk_address_packet correctly. From OKUJI Yoshinori. |
| |
| 1999-03-08 Gordon Matzigkeit <gord@trick.fig.org> |
| |
| * docs/grub.texi: New Texinfo documentation. |
| |
| * shared_src/disk_io.c (set_device): First stab at interpreting |
| Mach-style partition naming. |
| |
| * shared_src/stage2.c (run_menu): Don't say it was a failure if |
| enter_cmdline returns nonzero... just wait for a key. |
| |
| * shared_src/cmdline.c (enter_cmdline): Return nonzero, and avoid |
| the fallback command if we did an install. |
| |
| * shared_src/asm.S (_start): New explicit symbol to supress |
| warnings. |
| |
| * e2fs_stage1_5/Makefile.am (NO_FANCY_STUFF): Renamed to STAGE1_5, |
| since that describes this conditional more accurately. |
| * fat_stage1_5/Makefile.am: Likewise. |
| * ffs_stage1_5/Makefile.am: Likewise. |
| * shared_src/asm.S: Likewise. |
| * shared_src/char_io.c: Likewise. |
| * shared_src/common.c: Likewise. |
| * shared_src/disk_io.c: Likewise. |
| * shared_src/fsys_ext2fs.c: Likewise. |
| * shared_src/fsys_ffs.c: Likewise. |
| * shared_src/shared.h: Likewise. |
| |
| 1999-03-07 Gordon Matzigkeit <gord@trick.fig.org> |
| |
| * configure.in (SHARED_SRC_RULES): Automatically generate |
| Makefile dependencies for files in shared_src. |
| e2fs_stage1_5/Makefile.am: Use them. |
| fat_stage1_5/Makefile.am: Likewise. |
| ffs_stage1_5/Makefile.am: Likewise. |
| grub/Makefile.am: Likewise. |
| stage2/Makefile.am: Likewise. |
| stage2_debug/Makefile.am: Likewise. |
| |
| * shared_src/disk_inode.h: Fix typo: i_ic shouldn't be defined. |
| |
| * shared_src/fsys_ffs.c (block_map): Make static, since this |
| function isn't used outside of its defining file. |
| |
| * shared_src/disk_io.c [NO_FANCY_STUFF]: Eliminate a whole bunch |
| more functions from the stage1.5. From OKUJI Yoshinori. |
| * shared_src/fsys_ffs.c: Likewise. |
| * shared_src/char_io.c: Likewise. |
| |
| 1999-03-05 Gordon Matzigkeit <gord@trick.fig.org> |
| |
| * shared_src/char_io.c (getkey): Don't set BUF_DRIVE to -1. |
| BUF_DRIVE has nothing at all to do with getkey. |
| |
| * shared_src/common.c (err_list): Change description of ERR_GEOM |
| to be more informative. |
| |
| * Makefile.am (configure): Depend on debian/changelog. |
| |
| * configure.in (host_cpu): Make all fully i386-compatible CPUs be |
| identified as i386. |
| (AM_INIT_AUTOMAKE): Fetch values for PACKAGE and VERSION from |
| debian/changelog, so that we only have one file to update. |
| |
| * shared_src/asm.S (get_diskinfo): Fix a few bit-twiddling bugs in |
| the BIOS extension detection code. |
| (biosdisk) [AWARD_INT13_EXTENSIONS]: Preliminary implementation |
| of Award's encoding of cylinder bits 10 and 11. |
| (biosdisk) [NO_INT13_FALLBACK]: If defined, don't use the standard |
| disk interface if the extended interface fails. |
| |
| * configure.in: Make sure $(host_cpu) and $(host_vendor) are |
| substituted into the Makefile. |
| |
| * e2fs_stage1_5/Makefile.am (pkgdatadir): Install files in |
| $(datadir)/grub/$(host_cpu)-$(host_vendor). |
| * fat_stage1_5/Makefile.am: Likewise. |
| * ffs_stage1_5/Makefile.am: Likewise. |
| * stage1/Makefile.am: Likewise. |
| * stage2/Makefile.am: Likewise. |
| * stage2_debug/Makefile.am: Likewise. |
| |
| 1999-03-03 Gordon Matzigkeit <gord@trick.fig.org> |
| |
| * shared_src/asm.S (biosdisk): Use LBA mode if high nibble of |
| GEOMETRY is nonzero. |
| (get_diskinfo): Set high nibble of GEOMETRY (0xf0000000) to 1 if |
| LBA mode is detected. |
| |
| 1999-03-02 Gordon Matzigkeit <gord@trick.fig.org> |
| |
| * shared_src/disk_io.c (make_saved_active): Use BIOSDISK_READ and |
| BIOSDISK_WRITE. |
| |
| * shared_src/cmdline.c (enter_cmdline): Use BIOSDISK_WRITE. |
| |
| * shared_src/shared.h (BIOSDISK_SUBFUNC_READ, |
| BIOSDISK_SUBFUNC_WRITE): Delete constants. |
| |
| * shared_src/asm.S (biosdisk): Change subfunc argument to be |
| read=0, write=1. |
| |
| * configure.in: Drop redundant AC_PROG_INSTALL. From OKUJI |
| Yoshinori. |
| |
| 1999-03-01 Gordon Matzigkeit <gord@trick.fig.org> |
| |
| * debian/rules (binary-arch): Properly install README.debian. |
| |
| * acinclude.m4 (grub_OBJCOPY_ABSOLUTE): Don't forget to move the |
| old binary out of the way before reentering the loop. |
| (grub_ASM_ADDR32): Delete conftest files after running the test. |
| |
| * debian/rules (binary-arch): Remove empty /sbin directory until |
| /sbin/grub is installed. Use $(DESTDIR) instead of $(prefix) to |
| install files. |
| |
| * shared_src/asm.S (version_string): Set the version string from |
| the VERSION specified in configure.in. |
| |
| * Change all Makefiles into Makefile.ams. Many major build |
| environment changes to get Automake/Autoconf working nicely. |
| |
| 1999-02-28 Gordon Matzigkeit <gord@trick.fig.org> |
| |
| * NEWS: Moved from docs/NEWS. |
| |
| * configure.in, acinclude.m4: New files for Autoconf. From OKUJI |
| Yoshinori. |
| |
| * AUTHORS, INSTALL: New files. |
| |
| 1999-02-24 Gordon Matzigkeit <gord@trick.fig.org> |
| |
| * stage1/stage1.S (after_BPB): Do a hard disk probe first, so that |
| we can work with IDE floppies (like the LS-120). |
| |
| * Run GNU Indent on */*.[ch]. |
| |
| 1999-02-21 Gordon Matzigkeit <gord@trick.fig.org> |
| |
| * debian: Add to the distribution, since we maintain the GRUB |
| Debian package ourselves. |
| |
| * grub/asmstub.c: New file to implement stubbed assembly functions |
| under Unix. |
| |
| * stage1/Makefile: Delete spurious dependencies on Makefile. |
| * stage2/Makefile: Likewise. |
| * stage2_debug/Makefile: Likewise. |
| * grub/Makefile: Likewise. |
| |
| * shared_src/fsys_ext2fs.c (ext2fs_dir): Follow symbolic links |
| rather than giving an error. |
| |
| * shared_src/common.c (err_list): Use labeled elements to |
| associate messages with error codes. |
| * shared_src/shared.h: Make error codes into an enumerated type. |
| |
| * shared_src/common.c (err_list): Add ERR_SYMLINK_LOOP. |
| * shared_src/shared.h: Likewise. |
| |
| * shared_src/char_io.c (bcopy): Don't make any assumptions about |
| the length of an unsigned long. |
| |
| * grub/Makefile: Treat CFLAGS, CPPFLAGS, LDFLAGS according to |
| GNU standards. |
| * stage2/Makefile: Likewise. |
| * e2fs_stage1_5/Makefile: Likewise. |
| * fat_stage1_5/Makefile: Likewise. |
| * ffs_stage1_5/Makefile: Likewise. |
| |
| 1999-02-20 Gordon Matzigkeit <gord@trick.fig.org> |
| |
| * docs/index.html: Rename to grub.html, so that we don't hide |
| files in this directory from a web browser. |
| |
| 1999-02-15 Gordon Matzigkeit <gord@trick.fig.org> |
| |
| * Makefile.end (PROGS): Add grub. |
| |
| * grub/main.c: New file. |
| |
| * grub/Makefile: New directory to contain the stage2 Unix program. |
| |
| * shared_src/cmdline.c: Use substring. |
| * shared_src/fsys_ext2fs.c: Likewise. |
| * shared_src/fsys_fat.c: Likewise. |
| * shared_src/fsys_ffs.c: Likewise. |
| * shared_src/stage2.c: Likewise. |
| |
| * shared_src/shared.h: Delete strcmp, declare substring. |
| |
| * shared_src/char_io.c (strcmp): Rename to `substring', because |
| this function doesn't behave the same as libc's strcmp. |
| |
| 1999-02-14 Gordon Matzigkeit <gord@trick.fig.org> |
| |
| * shared_src/shared.h: (addr32, data32): Delete definitions. |
| |
| * stage1/stage1.S: Modify to use GAS's new .code16 semantics. |
| shared_src/asm.S: Likewise. |
| |
| * configure: Test to see if the `addr32' instruction is supported. |
| Ian Lance Taylor says that GAS's interpretation of `.code16' has |
| changed. Older versions always generated 32-bit code, but |
| implicitly inserted addr32 and data32 when .code16 was given. |
| Newer versions generate 16-bit code, and require manual addr32 and |
| data32 overrides. |
| |
| * shared_src/shared.h: Add some assertions to check that buffer |
| addresses are properly defined. |
| |
| 1999-02-12 Gordon Matzigkeit <gord@trick.fig.org> |
| |
| * shared_src/stage2.c (run_menu): Pause if we failed to boot both |
| the default and fallback entries. |
| |
| * configure: Check to make sure that GAS actually honors .code16 |
| directives. |
| |
| 1999-02-02 Gordon Matzigkeit <gord@trick.fig.org> |
| |
| * shared_src/asm.S: Fix typo that called interrupt 0xd (decimal |
| 13) instead of 0x13. |
| |
| 1999-01-31 Gordon Matzigkeit <gord@trick.fig.org> |
| |
| * e2fs_stage1_5/Makefile: Avoid gratuitous dependencies on |
| Makefile. |
| * fat_stage1_5/Makefile: Likewise. |
| * ffs_stage1_5/Makefile: Likewise. |
| |
| * Makefile.end (PROGS): Add e2fs_stage1_5, fat_stage1_5, and |
| grubinst. |
| (distclean): New GNU standard rule. |
| |
| 1998-10-23 Gordon Matzigkeit <gord@trick.fig.org> |
| |
| * configure: Accept `--host' as a synonym for `--target', and |
| accept a non-optional argument as the target name. Join the |
| prefix to the tool name with a hyphen. |
| |
| * shared_src/disk_io.c (print_fsys_type): Always print the |
| partition type. |
| |
| * shared_src/stage2.c (run_menu): Check to make sure that the |
| fallback entry is nonnegative. |
| (run_menu): For consistency, use `e' rather than enter to edit the |
| command entry. |