patch-chinese.diff

diff -Naur grub-0.97_splash/stage2/builtins.c grub-0.97_chinese/stage2/builtins.c
--- grub-0.97_splash/stage2/builtins.c	2009-03-19 22:21:45.000000000 +0800
+++ grub-0.97_chinese/stage2/builtins.c	2009-03-19 22:40:59.000000000 +0800
@@ -455,7 +455,10 @@
   blocklist_func,
   BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST,
   "blocklist FILE",
-  "Print the blocklist notation of the file FILE."
+  "Print the blocklist notation of the file FILE.",
+  "blocklist FILE",
+  "\t´òÓ¡³öÎļþ FILE µÄ¡°¿éÇåµ¥¡±±í´ï·¨£¨¸Ã±í´ï·¨Ò²ÊǺϷ¨µÄ GRUB ÎļþÃû£¬"
+  "\n\t²¢ÇÒÍêÈ«µÈ¼ÛÓÚ FILE¡££©¡£"
 };
 
 #if ! defined(GRUB_UTIL) && ! defined (STAGE1_5)
@@ -1088,7 +1091,9 @@
   boot_func,
   BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST | BUILTIN_BOOTING,
   "boot",
-  "Boot the OS/chain-loader which has been loaded."
+  "Boot the OS/chain-loader which has been loaded.",
+  "boot",
+  "\tÒýµ¼ÒѼÓÔصIJÙ×÷ϵͳ»òÉÈÇøÁ´Ê½¼ÓÔØÆ÷¡£"  
 };
 #endif /* ! GRUB_UTIL */
 
@@ -1135,7 +1140,10 @@
   "bootp [--with-configfile]",
   "Initialize a network device via BOOTP. If the option `--with-configfile'"
   " is given, try to load a configuration file specified by the 150 vendor"
-  " tag."
+  " tag.",
+  "bootp [--with-configfile]",
+  "\tͨ¹ý BOOTP ³õÊÔ»¯ÍøÂçÉ豸¡£Èç¹ûʹÓÃÁË --with-configfile ²ÎÊý£¬´ËÃüÁî"
+  "\n\t½«»áÊÔͼȥ¼ÓÔØÒ»¸öÌض¨µÄÅäÖÃÎļþ¡£"  
 };
 #endif /* ! GRUB_UTIL */
 #endif /* SUPPORT_NETBOOT */
@@ -1318,7 +1326,9 @@
   BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST,
   "cat [--hex] [--skip=S] [--length=L] [--locate=STRING] FILE",
   "Print the contents of the file FILE, or print the locations "
-  "of the string STRING in FILE."
+  "of the string STRING in FILE.",
+  "cat [--hex] [--skip=S] [--length=L] [--locate=STRING] FILE",
+  "\tÏÔʾָ¶¨ÎļþµÄÄÚÈÝ£¬»òÕßÏÔʾÎļþÖÐÖ¸¶¨×Ö·û´®µÄλÖá£"
 };
 
 
@@ -1375,7 +1385,11 @@
   "cdrom --add-io-ports=P | --init | --stop",
   "Initialise/stop atapi cdroms or set additional I/O ports for a possible atapi cdrom device."
   " The high word of P specifies the base register of the control block registers, and"
-  " the low word of P specifies the base register of the command block registers."
+  " the low word of P specifies the base register of the command block registers.",
+  "cdrom --add-io-ports=P | --init | --stop",
+  "\t³õʼ»¯»òÕßÍ£Ö¹ËùÓÐµÄ ATAPI CDROM É豸, »òÕßΪһ¸ö¿ÉÄÜµÄ ATAPI CDROM"
+  "\n\tÉ豸ÉèÖø½¼ÓµÄ IO ¶Ë¿Ú¡£P µÄ¸ß×ÖÖ¸¶¨É豸¿ØÖƼĴæÆ÷×éµÄ¶Ë¿Ú»ùÖ·£¬P µÄ"
+  "\n\tµÍ×ÖÖ¸¶¨É豸ÃüÁî¼Ä´æÆ÷×éµÄ¶Ë¿Ú»ùÖ·¡£"
 };
 #endif /* ! defined(GRUB_UTIL) && ! defined (STAGE1_5) */
 
@@ -2390,7 +2404,19 @@
   " RAM boot file format. Use --disable-a20 if you wish to turn off"
   " A20 when transferring control to the boot image."
   " SL specifies length in bytes at the beginning of the image to be"
-  " skipped when loading."
+  " skipped when loading.",
+  "chainloader [--force] [--load-segment=LS] [--load-offset=LO]"
+  " [--load-length=LL] [--skip-length=SL] [--boot-cs=CS] [--boot-ip=IP]"
+  " [--ebx=EBX] [--edx=EDX] [--sdi] [--enable-a20] FILE",
+  "\t¼ÓÔØÁ´Ê½¼ÓÔØÆ÷ FILE¡£ÈôÖ¸¶¨ÁË --force, ÔòÇ¿ÖƼÓÔضø²»¼ì²éµÚÒ»ÉÈÇø"
+  "\n\tβ²¿µÄºÏ·¨Òýµ¼±êÇ©(55 AA)ÊÇ·ñ´æÔÚ¡£LS:LO ÓÃÓÚÖ¸¶¨ÓбðÓÚ 0000:7C00"
+  "\n\tµÄÆô¶¯Ó³Ïñ¼ÓÔصØÖ·¡£LL ÓÃÓÚÖ¸¶¨Æô¶¯Ó³ÏñµÄ³¤¶È£¨ÔÚ 512 ×Ö½ÚÖÁ 640K"
+  "\n\tÖ®¼ä£©¡£SL ÓÃÓÚÖ¸¶¨×°ÈëÆô¶¯Ó³Ïñ֮ǰÐèÒª´ÓÓ³Ïñ¿ªÍ·Ìø¹ýµÄ³¤¶È£¨ÒÔ×Ö½Ú"
+  "\n\t¼ÆÊý£©¡£CS:IP ÓÃÓÚÖ¸¶¨ÈÃÆô¶¯Ó³Ïñ»ñµÃ¿ØÖÆÐèÒªÌøתµ½µÄµØÖ·¡£EBX/EDX"
+  "\n\t·Ö±ðÓÃÓÚÖ¸¶¨ÔÚÆô¶¯Ó³Ïñ»ñµÃ¿ØÖƵÄÄÇÒ»¿Ì EBX/EDX ¼Ä´æÆ÷Ó¦ÓеÄÖµ¡£ÓÃ"
+  "\n\t--sdi ¿ÉÒÔÇ¿ÖÆ°Ñ FILE µ±×÷ Windows XP µÄÒ»¸öÄÚ´æÆô¶¯Îļþ¸ñʽ(System"
+  "\n\tDeployment Image)À´¶Ô´ý(Çë²Î¿¼Î¢ÈíÏàÓ¦Îĵµ)¡£Èç¹ûÄãÏ£ÍûÔÚ¿ØÖÆ´«µÝ¸ø"
+  "\n\tÆô¶¯Ó³ÏñʱÇÐ¶Ï CPU µÄµØÖ·Ïß A20£¬¿ÉÒÔÓà --disable-a20 ²ÎÊý×öµ½¡£"
 };
 
 
@@ -2481,7 +2507,9 @@
   BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST,
   "cmp FILE1 FILE2",
   "Compare the file FILE1 with the FILE2 and inform the different values"
-  " if any."
+  " if any.",
+  "cmp FILE1 FILE2",
+  "\t±È½ÏÁ½¸öÎļþ, ²¢ÇÒ±¨¸æÁ½ÕßÖ®¼äµÄ²»Í¬µÄÐÅÏ¢¡£"
 };
 
 
@@ -2679,7 +2707,16 @@
   " A symbolic color name must be one of these: black, blue, green,"
   " cyan, red, magenta, brown, light-gray, dark-gray, light-blue,"
   " light-green, light-cyan, light-red, light-magenta, yellow and white."
-  " You can prefix \"blink-\" to FG if you want a blinking foreground color."
+  " You can prefix \"blink-\" to FG if you want a blinking foreground color.",
+  "color NORMAL [HIGHLIGHT [HELPTEXT [HEADING]]]",
+  "\t¸Ä±ä²Ëµ¥µÄÑÕÉ«¡£Normal ÓÃÓÚÖ¸¶¨²Ëµ¥ÏîµÄδѡÖÐʱµÄÑÕÉ«£¬HIGHLIGHT Ôò"
+  "\n\tÓÃÓÚÖ¸¶¨²Ëµ¥ÏîµÄ±»Ñ¡ÖÐʱµÄÑÕÉ«¡£Èç¹ûÄãδָ¶¨ HIGHLIGHT É«£¬ÄÇô"
+  "\n\t½«Ê¹Óà NORMAL µÄ·´É«Öµ¡£Èç¹ûδָ¶¨ HELPTEXT »ò HEADING£¬ÄÇô"
+  "\n\t¾ÍÓà NORMAL µÄÑÕÉ«¡£FG ºÍ BG ÊÇÑÕÉ«µÄÃû³Æ£¬ÈçÏ£ºblack(ºÚ), "
+  "\n\tblue(À¶), green(ÂÌ), cyan(Çà), red(ºì), magenta(·Ûºì), brown(×Ø), "
+  "\n\tlight-gray(ÁÁ»Ò),dark-gray(°µ»Ò), light-blue(dzÀ¶), light-green(µ­ÂÌ), "
+  "\n\tlight-cyan(µ­Çà), light-red(Ã÷ºì), light-magenta(dzºì), yellow(»Æ)ºÍ "
+  "\n\twhite(°×)¡£ÈôÏëʹÓÃÉÁ˸µÄÇ°¾°É«£¬Äã¿ÉÒÔÔÚ FG ǰʹÓà blink- ǰ׺¡£"
 };
 
 
@@ -2835,7 +2872,9 @@
   configfile_func,
   BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST | BUILTIN_BOOTING,
   "configfile FILE",
-  "Load FILE as the configuration file."
+  "Load FILE as the configuration file.",
+  "configfile FILE",
+  "\t°ÑÎļþ FILE ×÷ΪÅäÖÃÎļþÁ¢¼´¼ÓÔØÖ´ÐУ¨Ö»Óе±¼ÓÔØʧ°Üʱ²Å·µ»Ø£©¡£"
 };
 
 
@@ -3285,7 +3324,15 @@
   " of IF will be discarded. OF cannot be a gzipped file. If IF is a gzipped"
   " file, it will be decompressed automatically when copying. dd is dangerous,"
   " use at your own risk. To be on the safe side, you should only use dd to"
-  " write a file in memory."
+  " write a file in memory.",
+  "dd if=IF of=OF [bs=BS] [count=C] [skip=IN] [seek=OUT]",
+  "\t¸´ÖÆÎļþ IF µ½ OF¡£BS ÊÇ¿é´óС£¬Ä¬ÈÏÖµ 512¡£C ÊÇÒª¸´ÖƵĿéÊý£¬"
+  "\n\tĬÈÏÖµÊÇ IF Ëù°üº¬µÄ¿éÊý¡£IN ÊǶÁ IF ʱҪÌø¹ýµÄ¿éÊý£¬Ä¬ÈÏÖµ 0¡£"
+  "\n\tOUT ÊÇд OF ʱҪÌø¹ýµÄ¿éÊý£¬Ä¬ÈÏÖµ 0¡£±»Ìø¹ýµÄ¿éµÄÄÚÈݱ£³Ö"
+  "\n\t²»±ä¡£IF ºÍ OF ±ØÐ붼´æÔÚ¡£¸´ÖƲ»»áµ¼Ö OF µÄ³¤¶ÈÔö¼õ£¬IF"
+  "\n\tÖÐÊ£ÓàµÄβ°Í½«¶ªÆú¡£OF ²»ÄÜÊÇ gzip ѹËõ¸ñʽ¡£Èç¹û IF ÊÇ gzip"
+  "\n\tѹËõ¸ñʽ£¬¸´ÖÆʱ½«×Ô¶¯¶ÔËü½âѹ¡£dd ÊÇÒ»ÌõΣÏÕÃüÁʹÓÃʱ"
+  "\n\tÄã×Ô¼ºÒª³Ðµ£·çÏÕ¡£±£ÏÕÆð¼û£¬ÄãÓ¦¸ÃÖ»ÓÃËüдÈëÄÚ´æÖеÄÎļþ¡£"
 };
 
 
@@ -3327,7 +3374,9 @@
   debug_func,
   BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST,
   "debug [on | off | normal | status | INTEGER]",
-  "Turn on/off or display/set the debug level."
+  "Turn on/off or display/set the debug level.",
+  "debug [on | off | normal | status | INTEGER]",
+  "\t´ò¿ª¡¢¹Ø±Õ »òÕß ÏÔʾ¡¢ÉèÖà DEBUG£¨µ÷ÊÔ¡¢³ý´í£©¼¶±ð¡£"
 };
 
 
@@ -3415,7 +3464,12 @@
   " the key word `saved\' is specified, or to the entry number previously"
   " saved in the specified file FILE. When FILE is specified, all subsequent"
   " `savedefault\' commands will save default entry numbers into"
-  " FILE."
+  " FILE.",
+  "default [NUM | `saved' | FILE]",
+  "\tÉèÖÃĬÈÏÆô¶¯µÄ²Ëµ¥Èë¿ÚÏîΪ NUM (0 ´ú±íµÚÒ»Ïî)£¬»òÕßÓÉ savedefault"
+  "\n\tËù±£´æµÄÈë¿ÚÏÈç¹ûÖ¸¶¨Á˹ؼü×Ö saved£©£¬»òÕßÏÈÇ°±£´æÔÚÎļþ FILE"
+  "\n\tÖеÄÈë¿ÚÏî¡£µ±Ö¸¶¨ÁË FILE ʱ£¬ºóÐøµÄ savedefault ÃüÁ½«°ÑÈë¿ÚÏî"
+  "\n\t±£´æµ½ FILE ÖС£"
 #if 0
   "default [NUM | `saved']",
   "Set the default entry to entry number NUM (if not specified, it is"
@@ -3460,7 +3514,10 @@
   BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST,
   "device DRIVE DEVICE",
   "Specify DEVICE as the actual drive for a BIOS drive DRIVE. This command"
-  " can be used only in the grub shell."
+  " can be used only in the grub shell.",
+  "device DRIVE DEVICE",
+  "\tÖ¸¶¨ DEVICE ×÷Ϊ BIOS Çý¶¯Æ÷ DRIVE Ëù¶ÔÓ¦µÄʵ¼ÊÇý¶¯Æ÷¡£ÕâÌõÃüÁîÖ»ÓÃÓÚ"
+  "\n\t²Ù×÷ϵͳ Linux ϵÄÆô¶¯¹ÜÀí¹¤¾ß grub ÖУ¨Ëü½Ð×ö grub shell£©¡£"
 };
 #endif /* GRUB_UTIL */
 
@@ -3480,12 +3537,13 @@
   dhcp_func,
   BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_MENU | BUILTIN_HELP_LIST,
   "dhcp",
-  "Initialize a network device via DHCP."
+  "Initialize a network device via DHCP.",
+  "dhcp",
+  "\tͨ¹ý DHCP ³õÊÔ»¯ÍøÂçÉ豸¡£"
 };
 #endif /* SUPPORT_NETBOOT */
 
-
-static int terminal_func (char *arg, int flags);
+static int terminal_func (char *arg, int flags);
 
 #ifdef SUPPORT_GRAPHICS
 extern char splashimage[64];
@@ -3542,7 +3600,9 @@
   splashimage_func,
   BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_MENU | BUILTIN_HELP_LIST,
   "splashimage FILE",
-  "Load FILE as the background image when in graphics mode."
+  "Load FILE as the background image when in graphics mode.",
+  "splashimage FILE",
+  "\tͼÐÎģʽÏÂÔØÈë±³¾°Í¼Æ¬Îļþ¡£",
 };
 
 
@@ -3572,7 +3632,10 @@
   BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_MENU | BUILTIN_HELP_LIST,
   "foreground RRGGBB",
   "Sets the foreground color when in graphics mode."
-  "RR is red, GG is green, and BB blue. Numbers must be in hexadecimal."
+  "RR is red, GG is green, and BB blue. Numbers must be in hexadecimal.",
+  "foreground RRGGBB",
+  "\tÉèÖÃͼÐÎģʽϵÄÇ°¾°É«¡£RR ´ú±íºìÉ«, GG ´ú±íÂÌÉ«, BB ´ú±íÀ¶É«¡£"
+  "\n\tÕâЩÊýÖµ¶¼ÊÇÓÃÊ®Áù½øÖÆÀ´±íʾµÄ¡£"
 };
 
 
@@ -3601,7 +3664,10 @@
   BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_MENU | BUILTIN_HELP_LIST,
   "background RRGGBB",
   "Sets the background color when in graphics mode."
-  "RR is red, GG is green, and BB blue. Numbers must be in hexadecimal."
+  "RR is red, GG is green, and BB blue. Numbers must be in hexadecimal.",
+  "background RRGGBB",
+  "\tÉèÖÃͼÐÎģʽϵı³¾°É«¡£RR ´ú±íºìÉ«, GG ´ú±íÂÌÉ«, BB ´ú±íÀ¶É«¡£"
+  "\n\tÕâЩÊýÖµ¶¼ÊÇÓÃÊ®Áù½øÖÆÀ´±íʾµÄ¡£"
 };
 
 #endif /* SUPPORT_GRAPHICS */
@@ -3680,7 +3746,9 @@
   checkrange_func,
   BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST,
   "checkrange RANGE COMMAND",
-  "Return true if the return value of COMMAND is in RANGE and false otherwise."
+  "Return true if the return value of COMMAND is in RANGE and false otherwise.",
+  "checkrange RANGE COMMAND",
+  "\tÈç¹ûCOMMANDµÄ·µ»ØÖµ´¦ÓÚRANGEµ±ÖУ¬Ôò·µ»ØÕ棻·ñÔò·µ»Ø¼Ù¡£"
 };
 #ifndef GRUB_UTIL
 /* checktime */
@@ -3818,7 +3886,9 @@
   checktime_func,
   BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST,
   "checktime min hour dom month dow",
-  "Check time."
+  "Check time.",
+  "checktime min hour dom month dow",
+  "\t¼ì²éʱ¼ä¡£"
 };
 #endif
 
@@ -3838,7 +3908,9 @@
   clear_func,
   BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST,
   "clear",
-  "Clear the screen"
+  "Clear the screen",
+  "clear",
+  "\tÇåÆÁÄ»¡£"
 };
 
 
@@ -3880,7 +3952,9 @@
   displayapm_func,
   BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST,
   "displayapm",
-  "Display APM BIOS information."
+  "Display APM BIOS information.",
+  "displayapm",
+  "\tÏÔʾ APM BIOS µÄÏà¹ØÐÅÏ¢¡£"
 };
 #endif
 
@@ -3890,22 +3964,59 @@
 displaymem_func (char *arg, int flags)
 {
   if (get_eisamemsize () != -1)
-    grub_printf (" EISA Memory BIOS Interface is present\n");
+  {
+#ifdef SUPPORT_GRAPHICS
+	if (graphics_inited && ushFontReaded)
+		grub_printf (" EISAÄÚ´æBIOS½Ó¿Ú´æÔÚ\n");
+	else
+		grub_printf (" EISA Memory BIOS Interface is present\n");
+#else
+		grub_printf (" EISA Memory BIOS Interface is present\n");
+#endif
+}
   if (get_mmap_entry ((void *) SCRATCHADDR, 0) != 0
       || *((int *) SCRATCHADDR) != 0)
-    grub_printf (" Address Map BIOS Interface is present\n");
-
-  grub_printf (" Lower memory: %uK, "
+      {
+#ifdef SUPPORT_GRAPHICS
+	if (graphics_inited && ushFontReaded)
+	{
+      grub_printf (" µØÖ·±ä»»BIOS½Ó¿Ú´æÔÚ\n");
+      grub_printf (" µÍ¶ËÄÚ´æ: %uK, "
+	       "ÉÏλÄÚ´æ: %uK\n",
+	       saved_mem_lower, saved_mem_upper);
+	}
+	else
+	{
+      grub_printf (" Address Map BIOS Interface is present\n");
+      grub_printf (" Lower memory: %uK, "
 	       "Upper memory (to first chipset hole): %uK\n",
 	       saved_mem_lower, saved_mem_upper);
+	}
+#else
+      grub_printf (" Address Map BIOS Interface is present\n");
+      grub_printf (" Lower memory: %uK, "
+	       "Upper memory (to first chipset hole): %uK\n",
+	       saved_mem_lower, saved_mem_upper);
+#endif
+}
 
   if (mbi.flags & MB_INFO_MEM_MAP)
     {
       struct AddrRangeDesc *map = (struct AddrRangeDesc *) saved_mmap_addr;
       unsigned long end_addr = saved_mmap_addr + saved_mmap_length;
 
+#ifdef SUPPORT_GRAPHICS
+	if (graphics_inited && ushFontReaded)
+      grub_printf (" [µØÖ·ÇøÓòÃèÊö·û"
+		   "½ôËæÓÚ(ֵΪ64λ)]\n");
+	else
       grub_printf (" [Address Range Descriptor entries "
 		   "immediately follow (values are 64-bit)]\n");
+#else
+      grub_printf (" [Address Range Descriptor entries "
+		   "immediately follow (values are 64-bit)]\n");
+#endif
+
       while (end_addr > (unsigned long) map)
 	{
 	  char *str;
@@ -3914,6 +4025,16 @@
 	    str = "Usable RAM";
 	  else
 	    str = "Reserved";
+#ifdef SUPPORT_GRAPHICS
+	if (graphics_inited && ushFontReaded)
+	  grub_printf ("   %s:  »ùÖ·:  0x%x X 4GB + 0x%x,\n"
+		       "      ³¤¶È:   0x%x X 4GB + 0x%x ×Ö½Ú\n",
+		       str,
+		       (unsigned long) (map->BaseAddr >> 32),
+		       (unsigned long) (map->BaseAddr & 0xFFFFFFFF),
+		       (unsigned long) (map->Length >> 32),
+		       (unsigned long) (map->Length & 0xFFFFFFFF));
+	else
 	  grub_printf ("   %s:  Base Address:  0x%x X 4GB + 0x%x,\n"
 		       "      Length:   0x%x X 4GB + 0x%x bytes\n",
 		       str,
@@ -3921,7 +4042,15 @@
 		       (unsigned long) (map->BaseAddr & 0xFFFFFFFF),
 		       (unsigned long) (map->Length >> 32),
 		       (unsigned long) (map->Length & 0xFFFFFFFF));
-
+#else
+	  grub_printf ("   %s:  Base Address:  0x%x X 4GB + 0x%x,\n"
+		       "      Length:   0x%x X 4GB + 0x%x bytes\n",
+		       str,
+		       (unsigned long) (map->BaseAddr >> 32),
+		       (unsigned long) (map->BaseAddr & 0xFFFFFFFF),
+		       (unsigned long) (map->Length >> 32),
+		       (unsigned long) (map->Length & 0xFFFFFFFF));
+#endif
 	  map = ((struct AddrRangeDesc *) (((int) map) + 4 + map->size));
 	}
     }
@@ -3936,7 +4065,9 @@
   BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST,
   "displaymem",
   "Display what GRUB thinks the system address space map of the"
-  " machine is, including all regions of physical RAM installed."
+  " machine is, including all regions of physical RAM installed.",
+  "displaymem",
+  "\tÏÔʾ GRUB ËùÅжϵ½µÄµ±Ç°ÏµÍ³µÄÄÚ´æ·Ö²¼£¬°üÀ¨ËùÓÐÎïÀíÄÚ´æÇøÓò¡£"
 };
 
 
@@ -3995,7 +4126,10 @@
     BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT,
     "dump FROM TO",
     "Dump the contents of the file FROM to the file TO. FROM must be"
-    " a GRUB file and TO must be an OS file."
+    " a GRUB file and TO must be an OS file.",
+    "dump FROM TO",
+    "\tÏÔʾÖî¶àÎļþµÄÄÚÈÝ¡£×¢Ò⣬FROM ËùÖ¸¶¨µÄ±ØÐëÊÇÒ»¸ö GRUB Îļþ£¬TO Ëù"
+    "\n\tÖ¸¶¨µÄ±ØÐëÊÇÒ»¸ö²Ù×÷ϵͳÎļþ¡£ÕâÌõÃüÁîÖ»ÔÚ grub shell ÖвÅÓС£"
   };
 #endif /* GRUB_UTIL */
 
@@ -4142,7 +4276,11 @@
   "embed STAGE1_5 DEVICE",
   "Embed the Stage 1.5 STAGE1_5 in the sectors after MBR if DEVICE"
   " is a drive, or in the \"bootloader\" area if DEVICE is a FFS partition."
-  " Print the number of sectors which STAGE1_5 occupies if successful."
+  " Print the number of sectors which STAGE1_5 occupies if successful.",
+  "embed STAGE1_5 DEVICE",
+  "\tÈç¹ûÉ豸ÊǸöÇý¶¯Æ÷, Ôò½« Stage 1.5 ǶÈëµ½Ö÷Òýµ¼ÉÈÇøÖ®ºó. Èç¹ûÊÇ FFS"
+  "\n\t·ÖÇø, Ôò¿ÉǶÈëµ½¸ÃÉ豸µÄ¡°Òýµ¼´úÂ롱ÇøÖС£³É¹¦Ê±´òÓ¡³ö Stage 1.5 Ëù"
+  "\n\tÕ¼µÄÉÈÇøÊý¡£"
 };
 
 
@@ -4249,7 +4387,10 @@
   " errors, instead of waiting for the user to do anything, it"
   " immediately starts over using the NUM entry (same numbering as the"
   " `default' command). This obviously won't help if the machine"
-  " was rebooted by a kernel that GRUB loaded."
+  " was rebooted by a kernel that GRUB loaded.",
+  "fallback NUM...",
+  "\t½øÈëÎÞÈ˸ÉÔ¤Æô¶¯Ä£Ê½£ºÈç¹ûĬÈÏÆô¶¯Èë¿ÚÏî³ö´íʧ°Ü£¬Á¢¼´ÓÃÈë¿ÚÏî NUM"
+  "\n\tÀ´Æô¶¯£¨ÕâÀïµÄ¡°Èë¿ÚÏÓë default ÃüÁîÖеġ°Èë¿ÚÏÒâÒåÏàͬ£©¡£"
 #endif
 };
 
@@ -4273,7 +4414,9 @@
   BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST | BUILTIN_BOOTING,
 #if 1
   "commandline",
-  "Enter command-line prompt mode."
+  "Enter command-line prompt mode.",
+  "commandline",
+  "\t½øÈëÃüÁîÐÐÌáʾ·û·½Ê½¡£"
 #endif
 };
 
@@ -4718,7 +4861,14 @@
   " If the option --set-root is used and FILENAME is found on a device, then"
   " stop the find immediately and set the device as new root."
   " If the option --ignore-floppies is present, the search will bypass all"
-  " floppies. And --ignore-cd will skip (cd)."
+  " floppies. And --ignore-cd will skip (cd).",
+  "find [--set-root[=DIR]] [--ignore-floppies] [--ignore-cd] [FILENAME] [CONDITION]",
+  "\tÔÚËùÓзÖÇøÉϲéÕÒÎļþÃû, ²¢ÏÔʾ°üº¬¸ÃÎļþ²¢Âú×ã¸ø¶¨Ìõ¼þµÄÉ豸¡£"
+  "\n\tCONDITIONÊÇÒ»¸öÆÕͨµÄgrubÃüÁ·µ»Ø·ÇÁã±íʾÕ棬Áã±íʾ¼Ù¡£"
+  "\n\tÈç¹ûʹÓÃÁË --set-root Ñ¡Ïî, ÄÇôµ±ÔÚij¸öÉ豸ÉÏÕÒµ½ FILENAME ʱ,"
+  "\n\tÁ¢¼´Í£Ö¹²éÕÒ, ²¢½«´ËÉ豸É趨ΪÐ嵀 root É豸¡£Èç¹ûÖ¸¶¨ÁË"
+  "\n\t--ignore-floppies Ñ¡Ïî, ÄÇô²éÕÒ¹ý³Ì½«ÂÔ¹ýËùÓеÄÈíÅÌ¡£ÈôÖ¸¶¨"
+  "\n\t--ignore-cd Ôò»áÌø¹ý (cd)¡£"
 };
 
 
@@ -4930,7 +5080,14 @@
   " on all devices(if UUID is not specified). If DEVICE is specified," 
   " return true or false according to whether or not the DEVICE matches"
   " the specified UUID(if UUID is specified), or just list the uuid of"
-  " DEVICE(if UUID is not specified)."
+  " DEVICE(if UUID is not specified).",
+  "uuid [DEVICE] [UUID]",
+  "\tÈç¹û DEVICE δָ¶¨£¬ÔÚËùÓеķÖÇøÖÐËÑË÷´øÓÐ UUID µÄ"
+  "\n\t·ÖÇø£¬ÕÒµ½ºóÉèÖÃΪÐ嵀 root É豸£¨Èç¹ûÖ¸¶¨ÁË UUID£©£¬"
+  "\n\t»òÕßÖ»ÊÇÁгö¸÷¸ö·ÖÇøµÄ uuid£¨Èç¹ûδָ¶¨ UUID£©¡£"
+  "\n\tÈç¹ûÖ¸¶¨ÁË DEVICE£¬½ö½ö·µ»ØÒ»¸öÕæ¼ÙÖµ£¬±íʾÊÇ·ñÓë"
+  "\n\t¸ø¶¨µÄ UUID ÏàÆ¥Å䣨Èç¹ûÖ¸¶¨ÁË UUID£©£¬»òÕßÖ»ÊÇÁгö"
+  "\n\tDEVICE µÄ uuid Öµ£¨Èç¹ûδָ¶¨ UUID£©¡£"
 };
 
 static void
@@ -5048,7 +5205,9 @@
   fstest_func,
   BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST,
   "fstest [on | off | status]",
-  "Turn on/off or display the fstest mode, or toggle it if no argument."
+  "Turn on/off or display the fstest mode, or toggle it if no argument.",
+  "fstest [on | off | status]",
+  "\tÇл»ÎļþϵͳµÄ¸ú×Ù²âÊÔģʽ¡£"
 };
 
 #ifdef SUPPORT_GFX
@@ -5381,7 +5540,12 @@
   " tuned value. If --sync is specified, the C/H/S values in partition table"
   " of DRIVE and H/S values in BPB of each primary partition of DRIVE"
   "(or BPB of floppy DRIVE) will be updated according to the current"
-  " geometry of DRIVE in use."
+  " geometry of DRIVE in use.",
+  "geometry [--tune] [--sync] [DRIVE]",
+  "\tÊä³öÇý¶¯Æ÷µÄÏà¹ØÐÅÏ¢. Èç¹ûÖ¸¶¨ÁË --tune£¬ÄÇôÕâ¸öÇý¶¯Æ÷µÄ¼¸ºÎ²ÎÊý"
+  "\n\t½«±ä³Éµ÷ÕûºóµÄÖµ¡£Èç¹ûÖ¸¶¨ÁË --sync£¬ÄÇôÇý¶¯Æ÷µÄ·ÖÇø±íÒÔ¼°ÏàÓ¦"
+  "\n\tµÄ¸÷¸öÖ÷·ÖÇøµÄBPB±í£¨»òÕßÈíÅ̵ÄBPB±í£©¶¼Òª¸ù¾Ýµ±Ç°ÕýÔÚʹÓõÄ"
+  "\n\t¸ÃÇý¶¯Æ÷µÄ¼¸ºÎ²ÎÊý½øÐиüС£"
 #endif /* GRUB_UTIL */
 };
 
@@ -5406,7 +5570,10 @@
   BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST | BUILTIN_BOOTING,
   "halt [--no-apm]",
   "Halt your system. If APM is avaiable on it, turn off the power using"
-  " the APM BIOS, unless you specify the option `--no-apm'."
+  " the APM BIOS, unless you specify the option `--no-apm'.",
+  "halt [--no-apm]",
+  "\t¹Ø±Õϵͳ¡£Èç¹ûAPM(¸ß¼¶µçÔ´¹ÜÀí)¹¦ÄÜ´æÔÚ£¬½«Ê¹Óà APM BIOS ¹Ø±Õϵͳ£¬"
+  "\n\t³ý·ÇÖ¸¶¨ÁË --no-apm Ñ¡Ïî¡£"
 };
 
 
@@ -5491,13 +5658,25 @@
 	      if (substring (arg, (*builtin)->name, 0) < 1)
 		{
 		  char *doc = (*builtin)->long_doc;
-
+		  
 		  /* At first, print the name and the short doc.  */
-		  grub_printf ("%s: %s\n",
+		  if ((*builtin)->short_doc)
+		      grub_printf ("%s: %s\n",
 			       (*builtin)->name, (*builtin)->short_doc);
 
+#ifdef SUPPORT_GRAPHICS
+		  if (graphics_inited && ushFontReaded)
+		  {
+			if ((*builtin)->sc_long_doc)
+				grub_putstr ((*builtin)->sc_long_doc);
+			grub_putchar ('\n');
+			continue;
+		  }
+#endif
+
 		  /* Print the long doc.  */
-		  while (*doc)
+		  if (doc)
+		    while (*doc)
 		    {
 		      int len = grub_strlen (doc);
 		      //int i;
@@ -5534,7 +5713,9 @@
   BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST,
   "help [--all] [PATTERN ...]",
   "Display helpful information about builtin commands. Not all commands"
-  " aren't shown without the option `--all'."
+  " aren't shown without the option `--all'.",
+  "help [--all] [PATTERN ...]",
+  "\tÏÔʾÄÚ²¿ÃüÁîµÄ°ïÖúÐÅÏ¢¡£Òª²é¿´ËùÓÐÃüÁîµÄ°ïÖú£¬¿ÉʹÓà --all ²ÎÊý¡£"
 };
 
 
@@ -5592,7 +5773,10 @@
   "hide [PARTITION]",
   "Hide PARTITION by setting the \"hidden\" bit in"
   " its partition type code. The default partition is the current"
-  " root device."
+  " root device.",
+  "hide [PARTITION]",
+  "\tͨ¹ýÔÚ·ÖÇøÀàÐÍÂëÉÏÉèÖá°Òþ²Ø¡±±êÖ¾£¬À´Òþ²Ø·ÖÇø PARTITION¡£"
+  "\n\tĬÈϵķÖÇøÊǵ±Ç°µÄ¸ùÉ豸¡£"
 };
 
 
@@ -5637,6 +5821,10 @@
   "Hide/unhide PARTITION by setting/clearing the \"hidden\" bit in"
   " its partition type code, or report the hidden status."
   " The default partition is the current root device."
+  , "hiddenflag [--set | --clear] [PARTITION]",
+  "\tͨ¹ýÉèÖ㨻òÇå³ý£©·ÖÇøÀàÐÍÂëÖеġ°Òþ²Ø¡±±ê־λÀ´Òþ²Ø£¨»ò²»Òþ²Ø£©·ÖÇø"
+  "\n\tPARTITION¡£µ± --set ºÍ --clear ¶¼Î´Ö¸¶¨Ê±£¬Ö»±¨¸æ·ÖÇøµÄÒþ²Ø״̬¡£"
+  "\n\tµ± PARTITION δָ¶¨Ê±£¬Ê¹Óõ±Ç°µÄ¸ùÉ豸¡£"
 };
 
 
@@ -5649,7 +5837,14 @@
   
   if (! eth_probe ())
     {
-      grub_printf ("No ethernet card found.\n");
+#ifdef SUPPORT_GRAPHICS
+	if (graphics_inited && ushFontReaded)
+	  grub_printf ("δ·¢ÏÖÍø¿¨.\n");
+	else
+	  grub_printf ("No ethernet card found.\n");
+#else
+	grub_printf ("No ethernet card found.\n");
+#endif
       errnum = ERR_DEV_VALUES;
       return 0;
     }
@@ -5690,7 +5885,10 @@
   BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_MENU | BUILTIN_HELP_LIST,
   "ifconfig [--address=IP] [--gateway=IP] [--mask=MASK] [--server=IP]",
   "Configure the IP address, the netmask, the gateway and the server"
-  " address or print current network configuration."
+  " address or print current network configuration.",
+  "ifconfig [--address=IP] [--gateway=IP] [--mask=MASK] [--server=IP]",
+  "\tÖ¸¶¨ IP µØÖ·, ×ÓÍøÑÚÂë, Íø¹ØºÍ·þÎñÆ÷µØÖ·¡£²»´ø²ÎÊýʱ£¬½«ÏÔʾµ±Ç°µÄ"
+  "\n\tÍøÂçÅäÖá£"
 };
 #endif /* SUPPORT_NETBOOT */
 
@@ -5724,7 +5922,10 @@
   "impsprobe",
   "Probe the Intel Multiprocessor Specification 1.1 or 1.4"
   " configuration table and boot the various CPUs which are found into"
-  " a tight loop."
+  " a tight loop.",
+  "impsprobe",
+  "\t̽²â Intel ¶à´¦ÀíÆ÷¹æ·¶ 1.1/1.4 ÅäÖÃ±í²¢Ê¹ËùÕÒµ½µÄ¸÷´¦ÀíÆ÷Æô¶¯½øÈë"
+  "\n\t±ÕÑ­»·¡£"
 };
 #endif
 
@@ -5757,7 +5958,9 @@
   "initrd FILE [FILE ...]",
   "Load an initial ramdisk FILE for a Linux format boot image and set the"
   " appropriate parameters in the Linux setup area in memory. For Linux"
-  " 2.6+ kernels, multiple cpio files can be loaded."
+  " 2.6+ kernels, multiple cpio files can be loaded.",
+  "initrd FILE [FILE ...]",
+  "\t¼ÓÔØ Linux ¸ñʽµÄ³õʼ»¯ÐéÄâÅÌ, ²¢ÉèÖñØÒªµÄ²ÎÊý¡£"
 };
 
 
@@ -6332,7 +6535,15 @@
   " patched with the configuration filename REAL_CONFIG_FILE."
   " If the option `--force-lba' is specified, disable some sanity checks"
   " for LBA mode. If the option `--stage2' is specified, rewrite the Stage"
-  " 2 via your OS's filesystem instead of the raw device."
+  " 2 via your OS's filesystem instead of the raw device.",
+  "install [--stage2=STAGE2_FILE] [--force-lba] STAGE1 [d] DEVICE STAGE2 [ADDR] [p] [CONFIG_FILE] [REAL_CONFIG_FILE]",
+  "\t°²×° STAGE1 µ½Ö¸¶¨É豸ÉÏ, °²×°¼ÓÔØ STAGE2 ÐèÒªµÄ¿éÁÐ±íµ½ STAGE2 ÉÏ¡£"
+  "\n\tÈç¹ûʹÓÃÁËÑ¡Ïî'd', STAGE1 ×ÜÊÇÊÔͼʹÓð²×° STAGE2 µÄÇý¶¯Æ÷, ¶ø²»ÊÇ"
+  "\n\tÆô¶¯ÅÌ¡£STAGE2 ½«¼ÓÔØÔÚÖ¸¶¨µØÖ·ÉÏ, Èç¹ûδÉùÃ÷µØÖ·, Ôò×Ô¶¯¼ì²â¡£Èç¹û"
+  "\n\tʹÓÃÁËÑ¡Ïî 'p' »ò¸ø³öÁËÅäÖÃÎļþ, ½«ÐÞ¸Ä STAGE2 µÄµÚÒ»¸öÊý¾Ý¿é, ÐÞÕý"
+  "\n\tʵ¼Ê Stage2 Æô¶¯Ê±Ê¹ÓõÄÅäÖÃÎļþλÖ᣶ÔÓÚ Stage 1.5, ¸ÃֵΪ Stage2"
+  "\n\tµÄ·¾¶¡£Èç¹û°²×°µÄÊÇ Stage1.5, ÇÒÖ¸¶¨ÁËʵ¼ÊÅäÖÃÎļþ, Ôò½«¸ÃÅäÖÃÎļþ"
+  "\n\t·¾¶Ð´Èë Stage2 ÖС£"
 };
 
 
@@ -6442,7 +6653,13 @@
   " to suggest what type of kernel to be loaded. TYPE must be either of"
   " \"netbsd\", \"freebsd\", \"openbsd\", \"linux\", \"biglinux\" and"
   " \"multiboot\". The option --no-mem-option tells GRUB not to pass a"
-  " Linux's mem option automatically."
+  " Linux's mem option automatically.",
+  "kernel [--no-mem-option] [--type=TYPE] FILE [ARG ...]",
+  "\t³¢ÊÔÔØÈëÖ÷Òýµ¼Ó°ÏñÎļþ¡£ÆäËüÏ±»×÷ΪÄں˵ÄÃüÁîÐвÎÊý¶ø´«µÝ¸øÄںˡ£"
+  "\n\tʹÓôËÃüÁîÒÔÇ°£¬ÄÚºËËùÓõ½µÄÄ£¿éÓ¦¸Ã±»ÖØÐÂÔØÈë¡£²ÎÊý --type ÓÃÓÚ˵"
+  "\n\tÃ÷Äں˵ÄÀàÐÍ£¬°üÀ¨ netbsd, freebsd, openbsd, linux, biglinux ºÍ"
+  "\n\tmultiboot¡£²ÎÊý --no-mem-option ÓÃÓÚ˵Ã÷²»±Ø×Ô¶¯´«µÝ Linux µÄÄÚ´æ²Î"
+  "\n\tÊý¡£" 
 };
 
 
@@ -6465,7 +6682,9 @@
   lock_func,
   BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST,
   "lock",
-  "Break a command execution unless the user is authenticated."
+  "Break a command execution unless the user is authenticated.",
+  "lock",
+  "\tÈç¹ûÓû§Î´±»ÈÏÖ¤£¬ÔòÖÕÖ¹ÃüÁîµÄÖ´ÐС£"
 };
   
 
@@ -6489,7 +6708,9 @@
   ls_func,
   BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_MENU | BUILTIN_HELP_LIST,
   "ls [FILE_OR_DIR]",
-  "List file or directory."
+  "List file or directory.",
+  "ls [FILE_OR_DIR]",
+  "\tÁгöÎļþ»òĿ¼¡£"
 };
 #endif /* STAGE1_5 */
 
@@ -6591,7 +6812,9 @@
   BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST,
   "makeactive [--status] [PART]",
   "Activate the partition PART. PART defaults to the current root device."
-  " This command is limited to _primary_ PC partitions on a hard disk."
+  " This command is limited to _primary_ PC partitions on a hard disk.",
+  "makeactive [--status] [PART]",
+  "\t¼¤»î PART ·ÖÇø(»òµ±Ç°Ä¬ÈÏ·ÖÇø)¡£´ËÃüÁîÖ»ÄÜÓÃÓÚÓ²Å̵ġ°Ö÷¡±·ÖÇø¡£"
 };
 
 
@@ -8686,7 +8909,29 @@
   " memdrive is (-RESERV) in 512-byte-sectors. if RESERV is used and > 0,"
   " the memdrive will occupy the mem area starting at absolute physical"
   " address RESERV in 512-byte-sectors and ending at the end of this mem"
-  " block(usually the end of physical mem)."
+  " block(usually the end of physical mem).",
+  "map [--status] [--mem[=RESERV]] [--hook] [--unhook] [--unmap=DRIVES]\n [--rehook] [--floppies=M] [--harddrives=N] [--memdisk-raw=RAW]\n [--a20-keep-on=AKO] [--safe-mbr-hook=SMH] [--int13-scheme=SCH]\n [--ram-drive=RD] [--rd-base=ADDR] [--rd-size=SIZE] [[--read-only]\n [--fake-write] [--unsafe-boot] [--disable-chs-mode] [--disable-lba-mode]\n [--heads=H] [--sectors-per-track=S] TO_DRIVE FROM_DRIVE]",
+  "\t¶ÔÉ豸½øÐÐÓ³Éä¡£Õâ¶ÔÓÚÉÈÇøÁ´Ê½Òýµ¼ÊǺÜÓÐÓõŦÄÜ£¬±ÈÈç DOS¡£ÕâÀĿ"
+  "\n\tµÄÇý¶¯Æ÷ TO_DRIVE ¿ÉÒÔÊÇÒ»¸ö´ÅÅÌÎļþ£¨×¢Ò⣬µ±Ã»ÓÐÖ¸¶¨ --mem ʱ£¬Õâ"
+  "\n\tÒªÇó´ÅÅÌÎļþÊÇÁ¬Ðø´æ·ÅÓÚ½éÖÊÖеġ£ÁíÍ⣬ÈôʹÓÃÁË --read-only ²ÎÊý,"
+  "\n\t¸Ã¹¦Äܽ«Ê¹·ÂÕæ´ÅÅÌ´¦ÓÚÖ»¶Á; ÈôʹÓÃÁË --fake-write ²ÎÊý£¬¸Ã¹¦Äܽ«Ê¹"
+  "\n\t·ÂÕæ´ÅÅÌ´¦ÓÚ¼Ùд£¬¼´¼òµ¥µØ·µ»Ø¡°Ð´È롱³É¹¦£¬µ«Êµ¼ÊÉϲ»Ö´ÐÐдÈë²Ù×÷;"
+  "\n\tÈôʹÓÃÁË --unsafe-boot ²ÎÊý£¬¸Ã¹¦Äܽ«Ê¹·ÂÕæ´ÅÅ̵ĵÚÒ»ÉÈÇø´¦ÓÚ¿Éд;"
+  "\n\t£¨Ä¬ÈÏʱ·ÂÕæ´ÅÅ̵ĵÚÒ»ÉÈÇø±»±£»¤£¬²»Äܾ­ÓÉ int13/AH=03h ¶øдÈ룩¡£"
+  "\n\tÈôʹÓÃÁË --disable-chs-mode ²ÎÊý£¬CHS ·ÃÎʹ¦Äܽ«±»½ûÓÃ; ÈôʹÓÃÁË"
+  "\n\t--disable-lba-mode ²ÎÊý£¬ LBA ·ÃÎʹ¦Äܽ«±»½ûÓÃ; H ºÍ S Ö¸¶¨ÁËÐéÄâ´Å"
+  "\n\tÅ̵ÄÎïÀí²ÎÊý¡£ÈôʹÓÃÁË --status, --hook, --unhook, --rehook,"
+  "\n\t--floppies, --harddrives, --ram-drive, --rd-base, --rd-size,"
+  "\n\t--memdisk-raw, --a20-keep-on, --safe-mbr-hook, --int13-scheme Öî²ÎÊý"
+  "\n\tÖ®Ò»£¬ÄÇôÆäËüµÄÃüÁîÐвÎÊý½«±»ºöÂÔ¡£--floppies ÓÃÓÚÐÞ¸Ä BIOS Êý¾ÝÇø"
+  "\n\t0x410 ´¦µÄÈíÅ̸öÊýλÓò¡£--harddrives ÓÃÓÚÐÞ¸Ä BIOS Êý¾ÝÇø 0x475 ´¦µÄ"
+  "\n\tÓ²Å̸öÊý×Ö½Ú¡£--mem ²ÎÊýÖ¸¶¨Ê¹ÓÃÄÚ´æÀ´·ÂÕæ´ÅÅÌ£¨´Ëʱ TO_DRIVE ¿ÉÒÔÊÇ"
+  "\n\tgzip ¸ñʽµÄѹËõÎļþ£©¡£--ram-drive ÓÃÓÚÐ޸Ĵú±íÄÚ´æÅÌµÄ BIOS ´ÅÅ̺Å"
+  "\n\tÂë¡£--rd-base Ö¸¶¨ÄÚ´æÅ̵ÄÆðʼµØÖ·¡£--rd-size Ö¸¶¨ÄÚ´æÅ̵ĴóС£¨ÒÔ×Ö"
+  "\n\t½Ú¼ÆÊý£©¡£Èç¹û RESERV <= 0, ÄÇôÖÁÉÙ±£Áô (-RESERV * 512) ×Ö½ÚµÄÄÚ´æ"
+  "\n\tÓÃÀ´´æ·Å¸ÃÄÚ´æÅ̵ÄÉÈÇøÊý¾Ý£»Èç¹û RESERV > 0, ¸ÃÄÚ´æÅ̽«ÆðʼÓÚ¾ø¶ÔÎï"
+  "\n\tÀíµØÖ· (RESERV * 512)£¬¶øÖÕÖ¹ÓÚ¸ÃÆðʼµØÖ·ËùÔÚµÄÁ¬ÐøÄÚ´æ¿éµÄ½áβ£¨Í¨"
+  "\n\t³£µÈÓÚ»ò½Ó½üÓÚÎïÀíÄÚ´æµÄ½á⣩¡£"
 };
 #endif	/* ! GRUB_UTIL */
 
@@ -8753,7 +8998,9 @@
   md5crypt_func,
   BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST,
   "md5crypt",
-  "Generate a password in MD5 format."
+  "Generate a password in MD5 format.",
+  "md5crypt",
+  "\t²úÉúÒ»¸ö MD5 ¸ñʽµÄÃÜÂë¡£"
 };
 #endif /* USE_MD5_PASSWORDS */
 
@@ -8802,7 +9049,11 @@
   " interpretation of the file contents is made, so users of this"
   " command must know what the kernel in question expects). The"
   " rest of the line is passed as the \"module command line\", like"
-  " the `kernel' command."
+  " the `kernel' command.",
+  "module FILE [ARG ...]",
+  "\tΪ¶àÖØÆô¶¯Ó³Ïñ¸ñʽµÄÒýµ¼Ó³Ïñ¼ÓÔØÆô¶¯Ä£¿éÎļþ FILE£¨¶Ô¸ÃÎļþµÄÄÚÈݲ»"
+  "\n\t×÷ÈκνâÊÍ, Òò´ËʹÓÃÕâÌõÃüÁîµÄÓû§±ØÐëÁ˽âËùÌáµ½µÄÄÚºËÓ³ÏñµÄÒªÇ󣩡£"
+  "\n\tÆäÓà²ÎÊý×÷Ϊ¡°Ä£¿éÃüÁîÐС±´«µÝ, ¾ÍÏñ kernel ÃüÁîÄÇÑù¡£"
 };
 
 
@@ -8835,7 +9086,9 @@
   BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST,
   "modulenounzip FILE [ARG ...]",
   "The same as `module', except that automatic decompression is"
-  " disabled."
+  " disabled.",
+  "modulenounzip FILE [ARG ...]",
+  "\tÓë¡°module¡±ÃüÁîÏàͬ, ²î±ðÊÇ GRUB ²»»á¶Ô FILE ½øÐÐ×Ô¶¯½âѹËõ¡£"
 };
 
 #ifdef SUPPORT_GRAPHICS
@@ -8869,7 +9122,9 @@
   outline_func,
   BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST,
   "outline [on | off | status]",
-  "Turn on/off or display the outline mode, or toggle it if no argument."
+  "Turn on/off or display the outline mode, or toggle it if no argument.",
+  "outline [on | off | status]",
+  "\t´ò¿ª/¹Ø±Õ »òÕß ÏÔʾ×Ö·ûÂÖÀªÄ£Ê½¡£ÎÞ²ÎÊýʱ£¬Çл»×Ö·ûÂÖÀªÄ£Ê½¡£"
 };
 #endif /* SUPPORT_GRAPHICS */
 
@@ -8903,7 +9158,9 @@
   pager_func,
   BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST,
   "pager [on | off | status]",
-  "Turn on/off or display the pager mode, or toggle it if no argument."
+  "Turn on/off or display the pager mode, or toggle it if no argument.",
+  "pager [on | off | status]",
+  "\t´ò¿ª/¹Ø±Õ »òÕß ÏÔʾ·Öҳģʽ¡£ÎÞ²ÎÊýʱ£¬Çл»·Öҳģʽ¡£"
 };
 
 
@@ -9226,7 +9483,13 @@
   " If --active is used, the new partition will be active. START can be"
   " a contiguous file that will be used as the content/data of the new"
   " partition, in which case the LEN parameter is ignored, and TYPE can"
-  " be either 0x00 for auto or 0x10 for hidden-auto."
+  " be either 0x00 for auto or 0x10 for hidden-auto.",
+  "partnew [--active] PART TYPE START [LEN]",
+  "\t´´½¨Ò»¸öеÄÖ÷·ÖÇø¡£START ΪÆðʼÉÈÇøºÅ£¬LEN ΪÆä°üº¬µÄÉÈÇøÊý£¬TYPE"
+  "\n\tΪÆä·ÖÇøÀàÐÍ¡£Èç¹ûÓÃÁË --active£¬ÄÇôн¨µÄ·ÖÇø½«ÊÇ¡°¼¤»î¡±µÄ¡£"
+  "\n\tSTART ¿ÉÒÔÊÇÒ»¸öÁ¬ÐøµÄÎļþ£¨Ã»ÓÐËé¿é£©£¬¸ÃÎļþ½«±»ÓÃ×÷н¨·ÖÇø"
+  "\n\tµÄÄÚÈÝ£¨¼´·ÖÇøµÄÊý¾Ý£©£¬ÔÚÕâÖÖÇé¿öÏ£¬LEN ²ÎÊý±»ºöÂÔ£¬¶øÇÒ TYPE"
+  "\n\t¿ÉÒÔÊÇ 0x00 ±íʾ¡°×Ô¶¯¡±£¬Ò²¿ÉÒÔÊÇ 0x10 ±íʾ¡°Òþ²Ø-×Ô¶¯¡±¡£"
 };
 
 
@@ -9338,7 +9601,10 @@
   "parttype [PART] [TYPE]",
   "Change the type of the partition PART to TYPE. If TYPE is omitted, return "
   "the partition type of the specified device(instead of changing it). PART "
-  "default to the current root device."
+  "default to the current root device.",
+  "parttype [PART] [TYPE]",
+  "\t°ÑÖ¸¶¨·ÖÇø PART µÄ·ÖÇøÀàÐ͸ÄΪ TYPE¡£Èç¹ûÊ¡ÂÔ TYPE£¬ÔòÖ»·µ»ØÖ¸¶¨·ÖÇøµÄ"
+  "\n\tµ±Ç°ÀàÐͶø²»ÊÇÐÞ¸ÄÖ¸¶¨·ÖÇøµÄÀàÐÍ¡£Èç¹ûÊ¡ÂÔ PART£¬ÔòʹÓõ±Ç°Ä¬ÈÏ·ÖÇø¡£"
 };
 
 
@@ -9416,7 +9682,13 @@
   " instructions.  You can also use it in the script section, in"
   " which case it will ask for the password, before continueing."
   " The option --md5 tells GRUB that PASSWD is encrypted with"
-  " md5crypt."
+  " md5crypt.",
+  "password [--md5] PASSWD [FILE]",
+  "\tµ±Æä´¦Óڲ˵¥ÎļþµÄÊ×Ïîʱ£¬½«½ûÓÃËùÓеĽ»»¥Ê½²Ëµ¥±à¼­¹¦ÄÜ£¬°üÀ¨±à¼­"
+  "\n\t²Ëµ¥Ïî(`e')/½øÈëÃüÁîÐÐ(`c')¡£µ±ÕýÈ·ÊäÈëÃÜÂë(ÓÉ PASSWD Ö¸¶¨)ºó, ÔØÈë"
+  "\n\tеIJ˵¥Îļþ(ÓÉ FILE Ö¸¶¨)¡£Èç¹ûÄãûÓÐÖ¸¶¨ FILE ÏÄÇôÉÏÊö±»½ûÓÃ"
+  "\n\tµÄ¹¦Äܽ«±»ÆôÓÃÁË¡£µ±È»£¬ÄãÒ²¿ÉÒÔ½«´ËÃüÁîÓõ½Ä³¸ö²Ëµ¥ÏîÀÓÃÒÔÌá¸ß"
+  "\n\tϵͳ°²È«ÐÔ¡£²ÎÊý --md5 ˵Ã÷ÃÜÂë PASSWD ÊÇʹÓà md5crypt ¼ÓÃܵġ£"
 };
 
 
@@ -9482,7 +9754,10 @@
   pause_func,
   BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_NO_ECHO,
   "pause [--wait=T] [MESSAGE ...]",
-  "Print MESSAGE, then wait until a key is pressed or T seconds has passed."
+  "Print MESSAGE, then wait until a key is pressed or T seconds has passed.",
+  "pause [--wait=T] [MESSAGE ...]",
+  "\t´òÓ¡ÐÅÏ¢ MESSAGE£¬È»ºóµÈ´ý£¬Ö±µ½°´ÏÂÒ»¼ü£¬»òÕß T Ãë¹ýºó£¬ÃüÁî½áÊø£¬"
+  "\n\t¿ØÖÆ·µ»Øµ½ GRUB£¬¼ÌÐøÖ´ÐÐÏÂÒ»ÌõÃüÁî¡£"
 };
 
 
@@ -9516,7 +9791,9 @@
   quit_func,
   BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST | BUILTIN_BOOTING,
   "quit",
-  "Exit from the GRUB shell."
+  "Exit from the GRUB shell.",
+  "quit",
+  "\t´Ó GRUB ÃüÁîÐÐÖÐÍ˳ö¡£"
 };
 #else
 /* quit */
@@ -9609,7 +9886,9 @@
   quit_func,
   BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST | BUILTIN_BOOTING,
   "quit [--disable-a20]",
-  "Go back to DOS if GRUB was previously launched from DOS."
+  "Go back to DOS if GRUB was previously launched from DOS.",
+  "quit [--disable-a20]",
+  "\tÈç¹û GRUB ÏÈÇ°ÊÇ´Ó DOS Æô¶¯µÄ£¬¾Í·µ»Øµ½ DOS¡£"
 };
 #endif /* GRUB_UTIL */
 
@@ -9639,7 +9918,9 @@
   rarp_func,
   BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_MENU | BUILTIN_HELP_LIST,
   "rarp",
-  "Initialize a network device via RARP."
+  "Initialize a network device via RARP.",
+  "rarp",
+  "\tÓà RARP ³õʼ»¯ÍøÂçÉ豸¡£"
 };
 #endif /* ! GRUB_UTIL */
 #endif /* SUPPORT_NETBOOT */
@@ -9667,7 +9948,9 @@
   BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST,
   "read ADDR",
   "Read a 32-bit value from memory at address ADDR and"
-  " display it in hex format."
+  " display it in hex format.",
+  "read ADDR",
+  "\t´ÓÄÚ´æµÄÖ¸¶¨Î»ÖöÁÈ¡Ò»¸ö 32-bit µÄÖµ£¬²¢ÒÔÊ®Áù½øÖÆÐÎʽÏÔʾ³öÀ´¡£"
 };
 #endif /* ! GRUB_UTIL */
 
@@ -10011,7 +10294,9 @@
   write_func,
   BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST,
   "write [--offset=SKIP] ADDR_OR_FILE INTEGER_OR_STRING",
-  "Write a 32-bit value to memory or write a string to file(or device!)."
+  "Write a 32-bit value to memory or write a string to file(or device!).",
+  "write [--offset=SKIP] ADDR_OR_FILE INTEGER_OR_STRING",
+  "\tдһ¸ö32λµÄÖµµ½ÄÚ´æ»òÕßдһ¸ö×Ö·û´®µ½Îļþ£¨»òÉ豸£¡£©¡£"
 };
 
 
@@ -10031,7 +10316,9 @@
   reboot_func,
   BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST | BUILTIN_BOOTING,
   "reboot",
-  "Reboot your system."
+  "Reboot your system.",
+  "reboot",
+  "\tÖØÆôϵͳ¡£"
 };
 #endif /* ! GRUB_UTIL */
 
@@ -10304,6 +10591,78 @@
   return next ? 1 : (saved_drive & 0x80);
 }
 
+#ifdef SUPPORT_GRAPHICS
+/* Chinese Support by Gandalf
+ *    These codes used for defining a proper fontfile
+ */
+char fontfile[256];
+static int font_func (char *arg, int flags) {
+	//int i;
+
+	if (grub_strlen(arg) <= 0)
+	{
+#ifdef SUPPORT_GRAPHICS
+	if (graphics_inited && ushFontReaded)
+		grub_printf("µ±Ç°×ÖÌåÎļþ: %s", fontfile);
+	else
+		grub_printf("Current font file is: %s", fontfile);
+#else
+		grub_printf("Current font file is: %s", fontfile);
+#endif
+		return 1;
+	}
+	
+    while(arg[0]==' '||arg[0]=='\t') arg++;
+
+    if (strlen(arg) > 256)
+	return !(errnum = ERR_WONT_FIT);
+	
+//    if (flags == BUILTIN_CMDLINE) {
+	if (! grub_open(arg))
+	    return 0;
+	grub_close();
+//    }
+
+    strcpy(fontfile, arg);
+
+    /* get rid of TERM_NEED_INIT from the graphics terminal. */
+    for (i = 0; term_table[i].name; i++) {
+	if (grub_strcmp (term_table[i].name, "graphics") == 0) {
+	    term_table[i].flags &= ~TERM_NEED_INIT;
+	    break;
+	}
+    }
+    
+    //graphics_set_splash (splashimage);
+
+    if (/* flags == BUILTIN_CMDLINE && */ graphics_inited) {
+	graphics_end();
+	if (! graphics_init())
+		return !(errnum = ERR_EXEC_FORMAT);
+	graphics_cls();
+    }
+
+    /* FIXME: should we be explicitly switching the terminal as a 
+     * side effect here? */
+    terminal_func("graphics", flags);
+
+    return 1;
+}
+
+static struct builtin builtin_fontfile =
+{
+  "fontfile",
+  font_func,
+  BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_HELP_LIST,
+  "fontfile FILE",
+  "Specify the Chinese Font File. "
+  "If you want display chinese character, please run"
+  "splashimage command later.",
+  "fontfile FILE",
+  "\tÖ¸¶¨ÖÐÎÄ×ÖÌåÎļþ£¬²¢Çл»µ½¼òÌåÖÐÎÄÏÔʾ·½Ê½¡£"
+};
+#endif	/* SUPPORT_GRAPHICS */
+
 static int
 root_func (char *arg, int flags)
 {
@@ -10325,7 +10684,13 @@
   " optional HDBIAS parameter is a number to tell a BSD kernel"
   " how many BIOS drive numbers are on controllers before the current"
   " one. For example, if there is an IDE disk and a SCSI disk, and your"
-  " FreeBSD root partition is on the SCSI disk, then use a `1' for HDBIAS."
+  " FreeBSD root partition is on the SCSI disk, then use a `1' for HDBIAS.",
+  "root [DEVICE [HDBIAS]]",
+  "\tÉèÖøù·ÖÇøΪָ¶¨É豸(DEVICE), È»ºó³¢ÊԹҽӸ÷ÖÇøÒԵõ½·ÖÇø´óС(ÓÃÓÚ"
+  "\n\tÔÚES:ESIÖд«µÝ, ÉÈÇøÁ´Ê½Æô¶¯·½Ê½ÒªÇóÕâÑù)¡£BSD Çý¶¯ÀàÐÍÓÃÓÚÆô¶¯ BSD"
+  "\n\tµÄºËÐÄÆô¶¯), ºÍÈ·¶¨ BSD ×Ó·ÖÇøËùÔÚµÄ PC ·ÖÇø¡£¿ÉÑ¡µÄ´ÅÅÌÆ«ÒƲÎÊý, ÓÃ"
+  "\n\tÓÚ BSD ºËÐÄÈ·¶¨ÓжàÉÙ¸ö¿ØÖÆÆ÷ÔÚµ±Ç°¿ØÖÆÆ÷Ç°¡£±ÈÈç, ¼ÙÉèͬʱÓÐÒ»¸ö"
+  "\n\tIDE ºÍ SCSI ÅÌ, ¶ø BSD ¸ù·ÖÇøÔÚ SCSI ÅÌÉÏ, ÄÇô´ÅÅÌÆ«ÒƾÍΪ 1¡£"
 };
 
 
@@ -10346,7 +10711,12 @@
   " is useful for when an OS is outside of the area of the disk that"
   " GRUB can read, but setting the correct root device is still"
   " desired. Note that the items mentioned in `root' which"
-  " derived from attempting the mount will NOT work correctly."
+  " derived from attempting the mount will NOT work correctly.",
+  "rootnoverify [DEVICE [HDBIAS]]",
+  "\tÀàËÆÓÚ¡°root¡±Ö¸Áî, µ«²»³¢ÊԹҽӸ÷ÖÇø¡£ÕâÓÃÓÚÓÐЩ²Ù×÷ϵͳ°²×°ÔÚ"
+  "\n\tGRUB ÄÜ·ÃÎʵ½µÄ´ÅÅÌÇøÓòÖ®Í⣬»òÕßÆäÎļþϵͳ²»Äܱ» GRUB ʶ±ð³öÀ´£¬"
+  "\n\tµ«ÄãÈÔÈ»Ïë°ÑÕâ¸öÉ豸ǿÖÆÉèÖÃΪ root É豸µÄÇé¿ö¡£ËµÃ÷£ºÕâÑùÒ»À´£¬"
+  "\n\tÔ­À´ÔÚ root ÃüÁîÖг¢ÊÔ¹Ò½ÓµÄÄÇЩÏîÄ¿£¬ÏÖÔÚ½«²»Æð×÷ÓÃÁË¡£"
 };
 
 
@@ -10683,7 +11053,13 @@
   " `fallback' is used, next fallback entry is saved."
   " If T is not 0, prompt the user to confirm the write operation by"
   " pressing the Y key, and if no key-press detected within T seconds,"
-  " the write will be discarded."
+  " the write will be discarded.",
+  "savedefault",
+  "\tÈç¹ûûÓÐÖ¸¶¨²ÎÊý£¬¾Í°Ñµ±Ç°²Ëµ¥Ïî±£´æΪĬÈϵÄÒýµ¼Ïî¡£Èç¹ûÖ¸¶¨Á˲ÎÊý"
+  "\n\tNUM£¬ÄÇô±£´æµÄ¾ÍÊÇËü¡£Èç¹ûÖ¸¶¨µÄÊǹؼü×Ö fallback£¬ÄÇô±£´æµÄÊÇ"
+  "\n\tfallback ÃüÁîËùÖ¸¶¨µÄ²Ëµ¥Ïî¡£Èç¹û T ²»ÊÇ 0£¬½«ÌáʾÓû§°´Ï Y ¼üÀ´"
+  "\n\tÈ·ÈÏдÅ̲Ù×÷£¬Èç¹ûÔÚ T ÃëÖ®ÄÚûÓа´¼ü£¬»òÕß°´¼ü²»ÊÇ Y£¬ÄÇôдÅ̱£´æ"
+  "\n\tµÄ²Ù×÷½«±»È¡Ïû¡£"
 };
 
 
@@ -10835,7 +11211,13 @@
   " PARITY is the type of parity, which is one of `no', `odd' and `even'."
   " STOP is the length of stop bit(s). The option --device can be used only"
   " in the grub shell, which specifies the file name of a tty device. The"
-  " default values are COM1, 9600, 8N1."
+  " default values are COM1, 9600, 8N1.",
+  "serial [--unit=UNIT] [--port=PORT] [--speed=SPEED] [--word=WORD] [--parity=PARITY] [--stop=STOP] [--device=DEV]",
+  "\t³õʼ»¯Ò»¸ö´®¿ÚÉ豸¡£UNIT ÓÃÓÚÖ¸¶¨ÒªÊ¹ÓõĴ®¿ÚÉ豸(È磬0 == COM1);"
+  "\n\tPORT ÓÃÓÚÖ¸¶¨¶Ë¿ÚºÅ; SPEED ÓÃÓÚÖ¸¶¨Í¨Ñ¶µÄÊýÂÊ; WORD Ϊ×Ö³¤;"
+  "\n\tPARITY ΪÆæżÀàÐÍ(È¡ `no', `odd' ºÍ `even' Ö®Ò»µÄÖµ¡£); STOP ÊÇÍ£Ö¹"
+  "\n\tλµÄ³¤¶ÈÖµ; Ñ¡Ïî --device ½öÓÃÓÚÃüÁîÐÐģʽ£¬ÓÃÒÔÖ¸¶¨ tty É豸µÄÎļþ"
+  "\n\tÃû¡£Ä¬ÈÏÖµÊÇÕâÑùµÄ£¬COM1, 9600, 8N1¡£"
 };
 #endif /* SUPPORT_SERIAL */
 
@@ -11087,7 +11469,18 @@
   " quote, doublequote, backquote, tilde, shift, backslash, bar, comma,"
   " less, period, greater, slash, question, alt, space, capslock, FX (X"
   " is a digit), and delete. If no argument is specified, reset key"
-  " mappings."
+  " mappings.",
+  "setkey [TO_KEY FROM_KEY]",
+  "\t¸Ä±ä¼üÅÌÓ³Éä¹Øϵ¡£°ÑFROM_KEYÓ³ÉäΪTO_KEY¡£ÕâÀïµÄ¼ü±ØÐëÊÇ×Öĸ, Êý×Ö,"
+  "\n\tºÍÒÔÏÂÌØÊâ¼ü: escape(תÒå), exclam(!), at(@), numbersign(#),"
+  "\n\tdollar($), parenright[)], caret(^), ampersand(&), asterisk(*),"
+  "\n\tplus(+), percent(%), minus(-), underscore(_), equal(=),"
+  "\n\tparenleft[(], backspace(Í˸ñ), tab(ÖƱí), bracketleft([),"
+  "\n\tbraceleft({), bracketright(]), braceright(}), enter(»Ø³µ),"
+  "\n\tcontrol(¿ØÖÆ), semicolon(;), colon(:), quote('), doublequote(\"),"
+  "\n\tslash(/), backquote(`), tilde(~), shift(»»µµ), backslash(\\),"
+  "\n\tbar(|), comma(,), less(<), period(.), greater(>), question(?),"
+  "\n\talt(½»»¥), space(¿Õ¸ñ), capslock(´óд), Fx(¹¦Äܼü) ºÍ delete(ɾ³ý)¡£"
 };
 
 
@@ -11418,7 +11811,14 @@
   " doesn't work in LBA mode, specify the option `--force-lba'."
   " If you install GRUB under the grub shell and you cannot unmount the"
   " partition where GRUB images reside, specify the option `--stage2'"
-  " to tell GRUB the file name under your OS."
+  " to tell GRUB the file name under your OS.",
+  "setup [--prefix=DIR] [--stage2=STAGE2_FILE] [--force-lba] INSTALL_DEVICE [IMAGE_DEVICE]",
+  "\t×Ô¶¯°²×° GRUB. ÕâÌõÃüÁîʹÓøüÁé»îµÄ install ÃüÁ GRUB °²×°µ½Ö¸¶¨"
+  "\n\tÉ豸ÉÏ¡£Èç¹û¸ø³öÁËÓ³ÏóÉ豸, ½«ÔÚ¸ÃÉ豸ѰÕÒ GRUB, ·ñÔòʹÓÃȱʡµÄ¸ùÉè"
+  "\n\t±¸¡£¸ùÉ豸¿ÉÓà root Ö¸ÁîÖ¸¶¨¡£Èç¹ûÄãÈ·ÈÏϵͳµÄ BIOS Ó¦¸ÃÖ§³Ö LBA Ä£"
+  "\n\tʽ, µ«ÊÇ GRUB ȴûÓй¤×÷ÓÚ¸Ãģʽ, ÔòÇëÖ¸¶¨ --force-lba ²ÎÊý¡£ÈçÈôÄã"
+  "\n\tÔÚÃüÁîÐÐÖÐÒÑ°²×°ÁËÒ»´Î GRUB, ¿ÉÊÇÄãÈ´ÎÞ·¨Ð¶ÔØ GRUB ³ÌÐòËùÔڵķÖÇø£¬"
+  "\n\tÇëÖ¸¶¨ `--stage2' ²ÎÊý¡£"
 };
 
 
@@ -11617,7 +12017,16 @@
   " If you specify --no-edit, the BASH-like editing feature will be disabled."
   " If --timeout is present, this command will wait at most for SECS"
   " seconds. The option --lines specifies the maximum number of lines."
-  " The option --silent is used to suppress messages."
+  " The option --silent is used to suppress messages.",
+  "terminal [--dumb] [--no-echo] [--no-edit] [--timeout=SECS] [--lines=LINES] [--silent] [console] [serial] [hercules] [graphics]",
+  "\tÑ¡ÔñÒ»¸öÖնˡ£µ±Ö¸¶¨Á˶à¸öÖÕ¶ËÒÔºó, °´ÈÎÒâ¼ü·½¿É¼ÌÐø²Ù×÷¡£Èç¹û¿ØÖÆ"
+  "\n\t̨ºÍ´®¿Ú¶¼±»Ö¸¶¨ÁË, ÄÇôÄãÊ×ÏÈÔÚÆäÖа´Ï¼üÅ̵ÄÖն˽«±»Ê×ÏÈÑ¡ÖС£"
+  "\n\tÈç¹ûûÓÐÖ¸¶¨ÈκβÎÊý, ÄÇô´ËÃüÁÏÔʾ³öµ±Ç°µÄÖÕ¶ËÉèÖÃ; ²ÎÊý --dumb"
+  "\n\tÓÃÒÔÖ¸¶¨Ò»¸öÑÆÖÕ¶Ë, ·ñÔò¼´Îª vt100 ¼æÈÝÐÍ; ÈôʹÓÃÁË --no-echo ²ÎÊý,"
+  "\n\tÆÁÄ»ÉϽ«²»»á»ØÏÔÊäÈëµÄ×Ö·û; ÈôʹÓÃÁË --no-edit ²ÎÊý, the BASH-like"
+  "\n\tµÄ±à¼­¹¦Äܽ«±»½ûÓÃ; ÈôʹÓÃÁË --timeout ²ÎÊý, ¸ÃÃüÁµÈ´ýÊýÃëÖÓ(ÓÉ"
+  "\n\tSECS Ö¸¶¨); ¿ÉʹÓà --lines Ö¸¶¨×î´óµÄÐÐÊý; ¿ÉʹÓà --silent Ñ¡Ïî¹Ø±Õ"
+  "\n\tÏûÏ¢ÏÔʾ¡£"
 };
 #endif /* SUPPORT_SERIAL || SUPPORT_HERCULES || SUPPORT_GRAPHICS */
 
@@ -11733,7 +12142,13 @@
   "Define the capabilities of your terminal. Use this command to"
   " define escape sequences, if it is not vt100-compatible."
   " You may use \\e for ESC and ^X for a control character."
-  " If no option is specified, the current settings are printed."
+  " If no option is specified, the current settings are printed.",
+  "terminfo [--name=NAME --cursor-address=SEQ [--clear-screen=SEQ]"
+  " [--enter-standout-mode=SEQ] [--exit-standout-mode=SEQ]]",
+  
+  "\tÖ¸¶¨Öն˵ŦÄÜ¡£Èç¹û´ËÖÕ¶ËΪ vt100 ¼æÈÝÐ͵ģ¬Ôò¿ÉÖ¸¶¨»»Âë˳Ðò(¼´Ê¹"
+  "\n\tÓà \\e ´ú±í ESC, ^X¡¡´ú±í¿ØÖÆÂë); ÔÚδ¸øÈκβÎÊýµÄÇé¿öÏ£¬½«¸ø³ö"
+  "\n\tµ±Ç°ÅäÖÃÐÅÏ¢¡£"
 };
 #endif /* SUPPORT_SERIAL */
 	  
@@ -11823,7 +12238,13 @@
   " filepos=Y' reading has X and Y equal, then it is definitely"
   " consistent, and very likely works correctly subject to a"
   " consistent offset error. If this test succeeds, then a good next"
-  " step is to try loading a kernel."
+  " step is to try loading a kernel.",
+  "testload FILE",
+  "\tÓü¸ÖÖ²»Í¬µÄ·½Ê½¶ÁÈ¡Îļþ FILE µÄÕû¸öÄÚÈݲ¢±È½ÏËüÃÇ£¬ÒÔ²âÊÔÎļþϵͳ"
+  "\n\t´úÂëµÄÕýÈ·ÐÔ¡£Êä³ö¿´ÆðÀ´»áÓеã¶ù»ìÂÒ£¬µ«ÊÇ£¬Èç¹ûûÓб¨¸æ´íÎ󣬶øÇÒ"
+  "\n\t×îºóµÄ¡°i=X, filepos=Y¡±ÖÐµÄ X ºÍ Y ÊÇÏàµÈµÄ»°£¬ÄÇô´úÂëÎÞÒÉÊÇ¿É¿¿"
+  "\n\tµÄ£¬¶øÇҺܿÉÄÜÕýÈ·ÎÞÎóµØ¹¤×÷¶ø²»»á³öÏÖ±ðµÄ²î´í¡£Èç¹û²âÊԳɹ¦£¬ÏÂÒ»"
+  "\n\t²½¾¡¿É³¢ÊÔ¼ÓÔØÒ»¸öÄںˡ£"
 };
 #endif
 
@@ -11948,7 +12369,9 @@
   testvbe_func,
   BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST,
   "testvbe MODE",
-  "Test the VBE mode MODE. Hit any key to return."
+  "Test the VBE mode MODE. Hit any key to return.",
+  "testvbe MODE",
+  "\t²âÊÔËùÖ¸¶¨ MODE µÄ VBE ģʽ¡£"
 };
 
 static inline unsigned long vbe_far_ptr_to_linear (unsigned long ptr)
@@ -12098,7 +12521,10 @@
   "setvbe [MODE_3D]",
   "Set the VBE mode MODE_3D(which is of the form 1024x768x32) for each subsequent kernel command-line."
   " If no argument is specified, clear(nullify, invalidate) the video option"
-  " string setup by the previous setvbe command."
+  " string setup by the previous setvbe command.",
+  "setvbe [MODE_3D]",
+  "\tΪºóÐøµÄÿ¸ö kernel ÃüÁîÐÐÉèÖà VBE ģʽ MODE_3D(ÀýÈç 1024x768x32)¡£"
+  "\n\tÈô²»Ö¸¶¨²ÎÊý£¬ÔòÇå¿ÕÓÉÏÈÇ°µÄ setvbe ÃüÁîËùÉèÖõÄÊÓƵѡÏî×Ö·û´®¡£"
 };
 
 
@@ -12123,7 +12549,9 @@
   tftpserver_func,
   BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_MENU | BUILTIN_HELP_LIST,
   "tftpserver IPADDR",
-  "Override the TFTP server address."
+  "Override the TFTP server address.",
+  "tftpserver IPADDR",
+  "\tÖ¸¶¨ TFTP ·þÎñÆ÷µÄ IP µØÖ·¡£"
 };
 #endif /* SUPPORT_NETBOOT */
 
@@ -12198,7 +12626,9 @@
   tpm_func,
   BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST,
   "tpm --init",
-  "Initialise TPM."
+  "Initialise TPM.",
+  "tpm --init",
+  "\t³õʼ»¯TPM¡£"
 };
 #endif /* ! defined(GRUB_UTIL) && ! defined (STAGE1_5) */
 
@@ -12227,7 +12657,10 @@
   "unhide [PARTITION]",
   "Unhide PARTITION by clearing the \"hidden\" bit in its"
   " partition type code. The default partition is the current"
-  " root device."
+  " root device.",
+  "unhide [PARTITION]",
+  "\tͨ¹ýÇå³ý·ÖÇøÀàÐÍÂëÉϵġ°Òþ²Ø¡±±êÖ¾£¬À´½â³ý¶Ô·ÖÇø PARTITION µÄÒþ²Ø¡£"
+  "\n\tĬÈϵķÖÇøÊǵ±Ç°µÄ¸ùÉ豸¡£"
 };
 
 
@@ -12250,7 +12683,10 @@
   BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST,
   "uppermem KBYTES",
   "Force GRUB to assume that only KBYTES kilobytes of upper memory are"
-  " installed.  Any system address range maps are discarded."
+  " installed.  Any system address range maps are discarded.",
+  "uppermem KBYTES",
+  "\tÇ¿ÖÆ GRUB ³ÐÈÏϵͳÖÐÖ»°²×°ÁË (KBYTES) KB µÄÉÏλÄÚ´æ¡£ÂÔ¹ýÈκÎÐÎʽµÄ"
+  "\n\tϵͳÄÚ´æµØÖ·ÇøÓò²éÕÒ²½Öè¡£"
 };
 #endif
 
@@ -12354,7 +12790,9 @@
   BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_SCRIPT | BUILTIN_HELP_LIST,
   "vbeprobe [MODE]",
   "Probe VBE information. If the mode number MODE is specified, show only"
-  " the information about only the mode."
+  " the information about only the mode.",
+  "vbeprobe [MODE]",
+  "\tÕì²â VBE µÄÐÅÏ¢¡£Èç¹ûÖ¸¶¨ÁËÒ»¸öģʽ MODE£¬Ôò½öÏÔʾÕâ¸öģʽµÄÐÅÏ¢¡£"
 };
   
 
@@ -12407,6 +12845,7 @@
   &builtin_fallback,
   &builtin_find,
 #ifdef SUPPORT_GRAPHICS
+  &builtin_fontfile,			/* Chinese Support Function by Gandalf*/
   &builtin_foreground,
 #endif
   &builtin_fstest,
diff -Naur grub-0.97_splash/stage2/char_io.c grub-0.97_chinese/stage2/char_io.c
--- grub-0.97_splash/stage2/char_io.c	2009-03-03 00:27:08.000000000 +0800
+++ grub-0.97_chinese/stage2/char_io.c	2009-03-19 22:40:59.000000000 +0800
@@ -489,8 +489,17 @@
 {
   cls ();
 
+#ifdef SUPPORT_GRAPHICS
+if (graphics_inited && ushFontReaded)
+  grub_printf ("GNU GRUB  ÖÐÎÄ»¯°æ£Û°æ±¾ %s£Ý(%dK µÍ¶Ë / %dK ÉÏλ ÄÚ´æ)\n",
+	  version_string, saved_mem_lower, saved_mem_upper);
+else
   grub_printf ("GNU GRUB  version %s  (%dK lower / %dK upper memory)\n",
 	  version_string, saved_mem_lower, saved_mem_upper);
+#else
+  grub_printf ("GNU GRUB  version %s  (%dK lower / %dK upper memory)\n",
+	  version_string, saved_mem_lower, saved_mem_upper);
+#endif
 }
 
 #endif
diff -Naur grub-0.97_splash/stage2/cmdline.c grub-0.97_chinese/stage2/cmdline.c
--- grub-0.97_splash/stage2/cmdline.c	2009-02-15 21:36:01.000000000 +0800
+++ grub-0.97_chinese/stage2/cmdline.c	2009-03-19 22:40:59.000000000 +0800
@@ -58,10 +58,23 @@
 void
 print_cmdline_message (int forever)
 {
+#ifdef SUPPORT_GRAPHICS
+	if (graphics_inited && ushFontReaded)
+  printf (" £Û ÌṩÀàËÆ BASH µÄÐб༭¹¦ÄÜ¡£¶ÔÓÚµÚÒ»¸ö´Ê, TAB ¼üÁгö¿ÉÄܵÄ\n"
+	  "    ÍêÕûÃüÁî¡£·ñÔò¼´Áгö¿ÉÄܵÄÉ豸/Îļþ¡£%s £Ý\n",
+	  (forever ? "" : "  °´ `ESC` ¼´¿ÉÍ˳öµ±Ç°×´Ì¬¡£"));
+	else
   printf (" [ Minimal BASH-like line editing is supported.  For the first word, TAB\n"
 	  "   lists possible command completions.  Anywhere else TAB lists the possible\n"
 	  "   completions of a device/filename.%s ]\n",
 	  (forever ? "" : "  ESC at any time exits."));
+
+#else
+  printf (" [ Minimal BASH-like line editing is supported.  For the first word, TAB\n"
+	  "   lists possible command completions.  Anywhere else TAB lists the possible\n"
+	  "   completions of a device/filename.%s ]\n",
+	  (forever ? "" : "  ESC at any time exits."));
+#endif
 }
 
 /* Find the builtin whose command name is COMMAND and return the
diff -Naur grub-0.97_splash/stage2/graphics.c grub-0.97_chinese/stage2/graphics.c
--- grub-0.97_splash/stage2/graphics.c	2009-02-15 17:12:28.000000000 +0800
+++ grub-0.97_chinese/stage2/graphics.c	2009-03-19 22:40:59.000000000 +0800
@@ -1,4 +1,5 @@
 /* graphics.c - graphics mode support for GRUB */
+/* Chinese double-byte character support by Gandalf <f22_storm@163.com> */
 /* Implemented as a terminal type by Jeremy Katz <katzj@redhat.com> based
  * on a patch by Paulo César Pereira de Andrade <pcpa@conectiva.com.br>
  */
@@ -30,8 +31,13 @@
 #include <shared.h>
 #include <graphics.h>
 
+#define BASE_FONT_ADDR 0x500000;  /* Raw base address for Chinese Font.*/
+
+unsigned short stg2_ptborder = 0; /* Is called from stage2 drawing the menu border? */
+
 static int saved_videomode = 0;
 static unsigned char *font8x16 = 0;
+static int dbcs_ending_byte = 0;
 
 int outline = 0;
 int disable_space_highlight = 0;
@@ -62,6 +68,9 @@
 static int fontx = 0;
 static int fonty = 0;
 
+//static char* chrMsg = "(r)Powered by Gandalf, f22_storm@163.com, 07/15/2004";
+
+unsigned short ushFontReaded = 0;	/* font loaded? */
 /* global state so that we don't try to recursively scroll or cursor */
 static int no_scroll = 0;
 
@@ -124,11 +133,41 @@
         saved_videomode = set_videomode (0x12);
     }
 
+ 	if (! ushFontReaded)
+ 	{
+ 		ushFontReaded = 1;
+ 		
+ /* 		remove them all.    
+ 		grub_open("/boot/grub/fonts") ||
+ 		grub_open("/boot/fonts") ||
+ 		grub_open("/grub/fonts") ||
+ 		grub_open("/fonts") 
+ */		    		
+ 
+ 		if (grub_strlen (fontfile) > 0)
+ 		{
+ 			if (grub_open (fontfile) )
+ 			{
+ 				grub_read ((char *) RAW_ADDR (0x500000), -1, 0xedde0d90);
+ 
+ 				grub_close ();
+ 			}
+ 			else
+ 			{
+ 				ushFontReaded = 0;			
+ 				grub_printf ("load fontfile failed!\n");
+ 			}
+ 		}
+ 	}
+ 
     if (! read_image (splashimage))
     {
-        set_videomode (saved_videomode);
-        grub_printf("failed to read image\n");
-        return 0;
+ 		if (! ushFontReaded)
+ 		{
+ 			set_videomode (saved_videomode);
+ 			grub_printf ("failed to read image\n");
+ 			return 0;	/* graphics_init failure! */
+ 		}
     }
 
     font8x16 = (unsigned char *) graphics_get_font (); /* code in asm.S */
@@ -139,7 +178,7 @@
     graphics_highlight_color = ((graphics_normal_color >> 4) | 
 				((graphics_normal_color & 0xf) << 4));
 
-    return 1;
+    return 1;	/* graphics_init success */
 }
 
 /* Leave graphics mode */
@@ -150,9 +189,12 @@
     {
         set_videomode (saved_videomode);
         graphics_inited = 0;
+        ushFontReaded = 0;
     }
 }
 
+static unsigned char by[32], chsa[16], chsb[16];
+
 /* Print ch on the screen.  Handle any needed scrolling or the like */
 void
 graphics_putchar (int ch)
@@ -182,12 +224,12 @@
 
     text[fonty * 80 + fontx] = ch;
     text[fonty * 80 + fontx] &= 0x00ff;
-    if (graphics_current_color & 0xf0)
+    if (graphics_current_color == graphics_highlight_color)//if (graphics_current_color & 0xf0)
         text[fonty * 80 + fontx] |= 0x10000;//0x100;
 
     graphics_cursor(0);
 
-    if ((fontx + 1) >= x1)
+    if (fontx + 1 >= x1)
     {
         if (fonty + 1 < y1)
             graphics_setxy(x0, fonty + 1);
@@ -537,24 +579,100 @@
 static unsigned char chr[16 << 2];
 static unsigned char mask[16];
 
+/* This function was modified by Gandalf for Chinese Support 
+ *
+ * Change Log:
+ *	N/A
+ * TODO:
+ *      There is a empty line of the center of Chinese Character. !!!
+ */
 static void
 graphics_cursor (int set)
 {
     unsigned char *pat, *mem, *ptr;
-    int i, ch, offset;
+    int i, ch, offset, n, ch1, ch2;
     int invert = 0;
 
     if (set && no_scroll)
         return;
 
     offset = cursorY * 80 + fontx;
+
     ch = text[fonty * 80 + fontx] & 0xff;
     if (ch != ' ' || ! disable_space_highlight)
 	invert = (text[fonty * 80 + fontx] & /*0xff00*/ 0xffff0000) != 0;
+
     pat = font8x16 + (ch << 4);
 
+    dbcs_ending_byte = 0;
+
+    if (ushFontReaded && ch >= 0xa1 &&
+	   (! stg2_ptborder ||
+		(ch != DISP_VERT &&
+		 ch != DISP_UR &&
+		 ch != DISP_LL &&
+		 ch != DISP_HORIZ &&
+		 ch != DISP_LR &&
+		 ch != DISP_UL
+		)
+	   )
+       )
+    {
+	/* here is one trick, look one line as a string with '\0' ended, so,
+	 * if the last byte is the 1st byte of a Chinese Character,,, ,,, */
+        for (n = 0; n < fontx; n++)
+        {
+            ch1 = text[fonty * 80 + n] & 0xff;
+            ch2 = text[fonty * 80 + n+1] & 0xff;
+
+            if ((ch1>=0xa1 && ch1<=0xfe)&&(ch2>=0xa1 && ch2<=0xfe))
+            {
+                if (n == fontx-1)
+                {
+		    int dotpos;
+
+		    dbcs_ending_byte = ch;
+                    dotpos = (ch1-0xa1)*94 + ch2 - 0xa1;
+                    dotpos<<=5;
+
+                    grub_memmove(by, (unsigned char *) RAW_ADDR (0x500000 + dotpos), 32);
+
+                    for (i = 0; i <32; i ++)
+                    {
+                        if (i%2)
+                            chsb[i/2] = by[i];
+                        else
+                            chsa[i/2] = by[i];	
+                    }
+                }
+		n++;
+            }
+        }
+	if (! dbcs_ending_byte)
+	{
+		if (fontx == 79)
+		{
+			graphics_putchar (' ');
+			text[fonty * 80 + fontx] = ch;
+			text[fonty * 80 + fontx] &= 0x00ff;
+			if (graphics_current_color == graphics_highlight_color)//if (graphics_current_color & 0xf0)
+				text[fonty * 80 + fontx] |= 0x10000;//0x100;
+		}
+		return;
+	}
+    }
+
     mem = (unsigned char*)VIDEOMEM + offset;
 
+    if (dbcs_ending_byte)
+    {
+        mem--;//mem = (unsigned char*)VIDEOMEM + offset -1;
+	offset--;
+        pat = chsa;
+    }
+
+write_char:
+
     if (set)
     {
         MapMask(15);
@@ -643,6 +761,17 @@
     }
 
     MapMask(15);
+    
+    if (dbcs_ending_byte)
+    {
+	dbcs_ending_byte = 0;
+
+	/* reset the mem position */
+	mem++;//mem += 1;//mem = (unsigned char*)VIDEOMEM + offset;
+	offset = cursorY * 80 + fontx;
+	pat = chsb;
+	goto write_char;
+    }
 }
 
 #endif /* SUPPORT_GRAPHICS */
diff -Naur grub-0.97_splash/stage2/shared.h grub-0.97_chinese/stage2/shared.h
--- grub-0.97_splash/stage2/shared.h	2009-03-14 15:07:18.000000000 +0800
+++ grub-0.97_chinese/stage2/shared.h	2009-03-19 22:40:59.000000000 +0800
@@ -434,6 +434,12 @@
  *  Below this should be ONLY defines and other constructs for C code.
  */
 
+
+extern char fontfile[256];
+unsigned short stg2_ptborder;
+extern int graphics_inited;
+extern unsigned short ushFontReaded;
+
 /* multiboot stuff */
 
 #include "mb_header.h"
@@ -1093,6 +1099,10 @@
   char *short_doc;
   /* The long version of the documentation.  */
   char *long_doc;
+  /* The short-chinese version of the documentation.  */
+  char *sc_short_doc;
+  /* The long version-chinese of the documentation.  */
+  char *sc_long_doc;
 };
 
 /* All the builtins are registered in this.  */
diff -Naur grub-0.97_splash/stage2/stage2.c grub-0.97_chinese/stage2/stage2.c
--- grub-0.97_splash/stage2/stage2.c	2009-02-21 22:44:08.000000000 +0800
+++ grub-0.97_chinese/stage2/stage2.c	2009-03-19 22:40:59.000000000 +0800
@@ -128,6 +128,12 @@
 static void
 print_default_help_message (char *config_entries)
 {
+#ifdef SUPPORT_GRAPHICS
+      if (graphics_inited && ushFontReaded)
+	grub_printf ("\n  Óà %c ºÍ %c Á½¼ü½«Ò»¸ö²Ëµ¥ÏîÖÃΪ¸ßÁÁ¡£",
+ 			DISP_UP, DISP_DOWN);
+      else
+#endif
       grub_printf ("\n Use the %c and %c keys to highlight an entry.",
 		   DISP_UP, DISP_DOWN);
       
@@ -143,18 +149,38 @@
 	    }
 #endif
 #endif
+
+#ifdef SUPPORT_GRAPHICS
+	  if (graphics_inited && ushFontReaded)
+	    grub_putstr ("°´»Ø³µ»ò b ¼üÆô¶¯¡£°´ p ¼üÈ¡µÃ\n"
+		    "  ÌØȨ¿ØÖƹ¦ÄÜ¡£");
+	  else
+#endif
 	  grub_putstr (" Press ENTER or \'b\' to boot.\n"
 		" Press \'p\' to gain privileged control.");
 	}
       else
 	{
 	  if (config_entries)
-	    grub_putstr (" Press ENTER or \'b\' to boot.\n"
-		    " Press \'e\' to edit the commands before booting, or \'c\' for a command-line.");
+#ifdef SUPPORT_GRAPHICS
+	    if (graphics_inited && ushFontReaded)
+		grub_putstr ("°´»Ø³µ»ò b ¼üÆô¶¯£»°´ e ¼ü¿ÉÔÚ\n"
+			"  Æô¶¯Ç°ÖðÌõ±à¼­²Ëµ¥ÖеÄÃüÁîÐòÁУ»°´ c ¼ü½øÈëÃüÁîÐС£");		
+	    else
+#endif
+		grub_putstr (" Press ENTER or \'b\' to boot.\n"
+			" Press \'e\' to edit the commands before booting, or \'c\' for a command-line.");
 	  else
-	    grub_putstr (" At a selected line, press \'e\' to\n"
-		" edit, \'d\' to delete, or \'O\'/\'o\' to open a new line before/after. When done,\n"
-		" press \'b\' to boot, \'c\' for a command-line, or ESC to go back to the main menu.");
+#ifdef SUPPORT_GRAPHICS
+	    if (graphics_inited && ushFontReaded)
+		grub_putstr ("  °´ e ¼ü±à¼­µ±Ç°ÐУ»°´ d ¼üɾ\n"
+			"  ³ýµ±Ç°ÐУ»°´ O ¼ü»ò o ¼ü·Ö±ðÔÚµ±Ç°ÐÐ֮ǰ»òÖ®ºó²åÈëÒ»¸öÐÂÐС£±à¼­½áÊøʱ£¬\n"
+			"  °´ b ¼üÆô¶¯£»°´ c ¼ü½øÈëÃüÁîÐУ»°´ Esc ¼üÍ˻ص½Ö÷²Ëµ¥¡£");
+	    else
+#endif
+		grub_putstr (" At a selected line, press \'e\' to\n"
+			" edit, \'d\' to delete, or \'O\'/\'o\' to open a new line before/after. When done,\n"
+			" press \'b\' to boot, \'c\' for a command-line, or ESC to go back to the main menu.");
 	}
 
       default_help_message_destoyed = 0;
@@ -367,6 +393,8 @@
   
   gotoxy (MENU_BOX_X - 2, y);
 
+  stg2_ptborder = 1;		/* Chinese Season */
+  
   grub_putchar (DISP_UL);
   for (i = 0; i < MENU_BOX_W + 1; i++)
     grub_putchar (DISP_HORIZ);
@@ -394,6 +422,8 @@
 
   gotoxy (MENU_BOX_X - 2, MENU_BOX_B + 1);
 
+  stg2_ptborder = 0;
+  
   if (current_term->setcolorstate)
     current_term->setcolorstate (COLOR_STATE_STANDARD);
 }
@@ -628,8 +658,14 @@
 	      /* Print a message.  */
 	      if (! silent_hiddenmenu)
 	      {
-		grub_printf ("\rPress any key to enter the menu... %d   ",
-				grub_timeout);
+#ifdef SUPPORT_GRAPHICS
+		if (graphics_inited && ushFontReaded)
+			grub_printf ("\r  °´ÈÎÒâ¼ü½øÈë²Ëµ¥¡­¡­ %d   ",
+					   grub_timeout);
+		else
+#endif
+			grub_printf ("\rPress any key to enter the menu... %d   ",
+					   grub_timeout);
 	      }
 	    }
 	}
@@ -665,7 +701,12 @@
       print_default_help_message (config_entries);
 
       if (current_term->flags & TERM_DUMB)
-	grub_printf ("\n\nThe selected entry is %d ", entryno);
+#ifdef SUPPORT_GRAPHICS
+	if (graphics_inited && ushFontReaded)
+		grub_printf ("\n\n  µ±Ç°Ñ¡ÖÐÏîΪ£º%d ", entryno);
+	else
+#endif
+		grub_printf ("\n\nThe selected entry is %d ", entryno);
       else
 	print_entries (first_entry, entryno, menu_entries, config_entries);
     }
@@ -700,14 +741,25 @@
 	      current_term->setcolorstate (COLOR_STATE_HELPTEXT);
 
 	  if (current_term->flags & TERM_DUMB)
-	      grub_printf ("\r    Entry %d will be booted automatically in %d seconds.   ", 
-			   entryno, grub_timeout);
+#ifdef SUPPORT_GRAPHICS
+	    if (graphics_inited && ushFontReaded)
+		grub_printf ("\r    ÌõÄ¿ %d ½«»á×Ô¶¯ÔËÐÐÓÚ %d ÃëÖ®ºó¡£  ", 
+				entryno, grub_timeout);
+	    else
+#endif
+		grub_printf ("\r    Entry %d will be booted automatically in %d seconds.   ", 
+				entryno, grub_timeout);
 	  else
 	    {
 	      int i;
 	      char tmp_buf[128];
 	      char ch = ' ';
 
+#ifdef SUPPORT_GRAPHICS
+	      if (graphics_inited && ushFontReaded)
+		grub_sprintf (tmp_buf, "  ¸ßÁÁÑ¡ÖеÄÌõÄ¿½«»á×Ô¶¯ÔËÐÐÓÚ %d ÃëÖ®ºó¡£  ", grub_timeout);
+	      else
+#endif
 	      grub_sprintf (tmp_buf, " The highlighted entry will be booted automatically in %d seconds.", grub_timeout);
 	      gotoxy (MENU_BOX_X - 2, MENU_BOX_H + 7);
 	      for (i = 0; i < 79; i++)
@@ -741,7 +793,14 @@
 	     since we're comming in here also on GRUB_TIMEOUT == -1 and
 	     hang in GETKEY */
 	  if (current_term->flags & TERM_DUMB)
-	    grub_printf ("\r    Highlighted entry is %d: ", entryno);
+	  {
+#ifdef SUPPORT_GRAPHICS
+	    if (graphics_inited && ushFontReaded)
+		grub_printf ("\r    ¸ßÁÁÑ¡ÖеÄÌõĿΪ %d: ", entryno);
+	    else
+#endif
+		grub_printf ("\r    Highlighted entry is %d: ", entryno);
+	  }
 
 	  c = /*ASCII_CHAR*/ (getkey ());
 
@@ -761,9 +820,6 @@
 	    {
 	      int i;
 
-	      if (current_term->setcolorstate)
-		  current_term->setcolorstate (COLOR_STATE_HELPTEXT);
-
 	      if (current_term->flags & TERM_DUMB)
 		grub_putchar ('\r');
 	      else