| /* |
| * Etherboot - BOOTP/TFTP Bootstrap Program |
| * |
| * w89c840.c -- This file implements the winbond-840 driver for etherboot. |
| * |
| */ |
| |
| /* |
| * Adapted by Igor V. Kovalenko |
| * -- <garrison@mail.ru> |
| * OR |
| * -- <iko@crec.mipt.ru> |
| * Initial adaptaion stage, including testing, completed 23 August 2000. |
| */ |
| |
| /* |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2, or (at |
| * your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| /* |
| * date version by what |
| * Written: Aug 20 2000 V0.10 iko Initial revision. |
| * changes: Aug 22 2000 V0.90 iko Works! |
| * Aug 23 2000 V0.91 iko Cleanup, posted to etherboot |
| * maintainer. |
| * Aug 26 2000 V0.92 iko Fixed Rx ring handling. |
| * First Linux Kernel (TM) |
| * successfully loaded using |
| * this driver. |
| * Jan 07 2001 V0.93 iko Transmitter timeouts are handled |
| * using timer2 routines. Proposed |
| * by Ken Yap to eliminate CPU speed |
| * dependency. |
| * Dec 12 2003 V0.94 timlegge Fixed issues in 5.2, removed |
| * interrupt usage, enabled |
| * multicast support |
| * |
| * This is the etherboot driver for cards based on Winbond W89c840F chip. |
| * |
| * It was written from skeleton source, with Donald Becker's winbond-840.c |
| * kernel driver as a guideline. Mostly the w89c840 related definitions |
| * and the lower level routines have been cut-and-pasted into this source. |
| * |
| * Frankly speaking, about 90% of the code was obtained using cut'n'paste |
| * sequence :) while the remainder appeared while brainstorming |
| * Linux Kernel 2.4.0-testX source code. Thanks, Donald and Linus! |
| * |
| * There was a demand for using this card in a rather large |
| * remote boot environment at MSKP OVTI Lab of |
| * Moscow Institute for Physics and Technology (MIPT) -- http://www.mipt.ru/ |
| * so you may count that for motivation. |
| * |
| */ |
| |
| /* |
| * If you want to see debugging output then define W89C840_DEBUG |
| */ |
| |
| /* |
| #define W89C840_DEBUG |
| */ |
| |
| /* |
| * Keep using IO_OPS for Etherboot driver! |
| */ |
| #define USE_IO_OPS |
| |
| #include "etherboot.h" |
| #include "nic.h" |
| #include "pci.h" |
| #include "timer.h" |
| |
| static const char *w89c840_version = "driver Version 0.94 - December 12, 2003"; |
| |
| typedef unsigned char u8; |
| typedef signed char s8; |
| typedef unsigned short u16; |
| typedef signed short s16; |
| typedef unsigned int u32; |
| typedef signed int s32; |
| |
| /* Linux support functions */ |
| #define virt_to_le32desc(addr) virt_to_bus(addr) |
| #define le32desc_to_virt(addr) bus_to_virt(addr) |
| |
| /* |
| #define cpu_to_le32(val) (val) |
| #define le32_to_cpu(val) (val) |
| */ |
| |
| /* Operational parameters that are set at compile time. */ |
| |
| /* Keep the ring sizes a power of two for compile efficiency. |
| The compiler will convert <unsigned>'%'<2^N> into a bit mask. |
| Making the Tx ring too large decreases the effectiveness of channel |
| bonding and packet priority. |
| There are no ill effects from too-large receive rings. */ |
| #define TX_RING_SIZE 2 |
| #define RX_RING_SIZE 2 |
| |
| /* The presumed FIFO size for working around the Tx-FIFO-overflow bug. |
| To avoid overflowing we don't queue again until we have room for a |
| full-size packet. |
| */ |
| #define TX_FIFO_SIZE (2048) |
| #define TX_BUG_FIFO_LIMIT (TX_FIFO_SIZE-1514-16) |
| |
| /* Operational parameters that usually are not changed. */ |
| /* Time in jiffies before concluding the transmitter is hung. */ |
| #define TX_TIMEOUT (10*TICKS_PER_MS) |
| |
| #define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/ |
| |
| /* |
| * Used to be this much CPU loops on Celeron@400 (?), |
| * now using real timer and TX_TIMEOUT! |
| * #define TX_LOOP_COUNT 10000000 |
| */ |
| |
| #if !defined(__OPTIMIZE__) |
| #warning You must compile this file with the correct options! |
| #warning See the last lines of the source file. |
| #error You must compile this driver with "-O". |
| #endif |
| |
| enum chip_capability_flags {CanHaveMII=1, HasBrokenTx=2}; |
| |
| #ifdef USE_IO_OPS |
| #define W840_FLAGS (PCI_USES_IO | PCI_ADDR0 | PCI_USES_MASTER) |
| #else |
| #define W840_FLAGS (PCI_USES_MEM | PCI_ADDR1 | PCI_USES_MASTER) |
| #endif |
| |
| static u32 driver_flags = CanHaveMII | HasBrokenTx; |
| |
| /* This driver was written to use PCI memory space, however some x86 systems |
| work only with I/O space accesses. Pass -DUSE_IO_OPS to use PCI I/O space |
| accesses instead of memory space. */ |
| |
| #ifdef USE_IO_OPS |
| #undef readb |
| #undef readw |
| #undef readl |
| #undef writeb |
| #undef writew |
| #undef writel |
| #define readb inb |
| #define readw inw |
| #define readl inl |
| #define writeb outb |
| #define writew outw |
| #define writel outl |
| #endif |
| |
| /* Offsets to the Command and Status Registers, "CSRs". |
| While similar to the Tulip, these registers are longword aligned. |
| Note: It's not useful to define symbolic names for every register bit in |
| the device. The name can only partially document the semantics and make |
| the driver longer and more difficult to read. |
| */ |
| enum w840_offsets { |
| PCIBusCfg=0x00, TxStartDemand=0x04, RxStartDemand=0x08, |
| RxRingPtr=0x0C, TxRingPtr=0x10, |
| IntrStatus=0x14, NetworkConfig=0x18, IntrEnable=0x1C, |
| RxMissed=0x20, EECtrl=0x24, MIICtrl=0x24, BootRom=0x28, GPTimer=0x2C, |
| CurRxDescAddr=0x30, CurRxBufAddr=0x34, /* Debug use */ |
| MulticastFilter0=0x38, MulticastFilter1=0x3C, StationAddr=0x40, |
| CurTxDescAddr=0x4C, CurTxBufAddr=0x50, |
| }; |
| |
| /* Bits in the interrupt status/enable registers. */ |
| /* The bits in the Intr Status/Enable registers, mostly interrupt sources. */ |
| enum intr_status_bits { |
| NormalIntr=0x10000, AbnormalIntr=0x8000, |
| IntrPCIErr=0x2000, TimerInt=0x800, |
| IntrRxDied=0x100, RxNoBuf=0x80, IntrRxDone=0x40, |
| TxFIFOUnderflow=0x20, RxErrIntr=0x10, |
| TxIdle=0x04, IntrTxStopped=0x02, IntrTxDone=0x01, |
| }; |
| |
| /* Bits in the NetworkConfig register. */ |
| enum rx_mode_bits { |
| AcceptErr=0x80, AcceptRunt=0x40, |
| AcceptBroadcast=0x20, AcceptMulticast=0x10, |
| AcceptAllPhys=0x08, AcceptMyPhys=0x02, |
| }; |
| |
| enum mii_reg_bits { |
| MDIO_ShiftClk=0x10000, MDIO_DataIn=0x80000, MDIO_DataOut=0x20000, |
| MDIO_EnbOutput=0x40000, MDIO_EnbIn = 0x00000, |
| }; |
| |
| /* The Tulip Rx and Tx buffer descriptors. */ |
| struct w840_rx_desc { |
| s32 status; |
| s32 length; |
| u32 buffer1; |
| u32 next_desc; |
| }; |
| |
| struct w840_tx_desc { |
| s32 status; |
| s32 length; |
| u32 buffer1, buffer2; /* We use only buffer 1. */ |
| }; |
| |
| /* Bits in network_desc.status */ |
| enum desc_status_bits { |
| DescOwn=0x80000000, DescEndRing=0x02000000, DescUseLink=0x01000000, |
| DescWholePkt=0x60000000, DescStartPkt=0x20000000, DescEndPkt=0x40000000, |
| DescIntr=0x80000000, |
| }; |
| #define PRIV_ALIGN 15 /* Required alignment mask */ |
| #define PRIV_ALIGN_BYTES 32 |
| |
| static struct winbond_private |
| { |
| /* Descriptor rings first for alignment. */ |
| struct w840_rx_desc rx_ring[RX_RING_SIZE]; |
| struct w840_tx_desc tx_ring[TX_RING_SIZE]; |
| struct net_device *next_module; /* Link for devices of this type. */ |
| void *priv_addr; /* Unaligned address for kfree */ |
| const char *product_name; |
| /* Frequently used values: keep some adjacent for cache effect. */ |
| int chip_id, drv_flags; |
| struct pci_dev *pci_dev; |
| int csr6; |
| struct w840_rx_desc *rx_head_desc; |
| unsigned int cur_rx, dirty_rx; /* Producer/consumer ring indices */ |
| unsigned int rx_buf_sz; /* Based on MTU+slack. */ |
| unsigned int cur_tx, dirty_tx; |
| int tx_q_bytes; |
| unsigned int tx_full:1; /* The Tx queue is full. */ |
| /* These values are keep track of the transceiver/media in use. */ |
| unsigned int full_duplex:1; /* Full-duplex operation requested. */ |
| unsigned int duplex_lock:1; |
| unsigned int medialock:1; /* Do not sense media. */ |
| unsigned int default_port:4; /* Last dev->if_port value. */ |
| /* MII transceiver section. */ |
| int mii_cnt; /* MII device addresses. */ |
| u16 advertising; /* NWay media advertisement */ |
| unsigned char phys[2]; /* MII device addresses. */ |
| } w840private __attribute__ ((aligned (PRIV_ALIGN_BYTES))); |
| |
| /* NIC specific static variables go here */ |
| |
| static int ioaddr; |
| static unsigned short eeprom [0x40]; |
| static char rx_packet[PKT_BUF_SZ * RX_RING_SIZE]; |
| static char tx_packet[PKT_BUF_SZ * TX_RING_SIZE]; |
| |
| static int eeprom_read(long ioaddr, int location); |
| static int mdio_read(int base_address, int phy_id, int location); |
| #if 0 |
| static void mdio_write(int base_address, int phy_id, int location, int value); |
| #endif |
| |
| static void check_duplex(void); |
| static void set_rx_mode(void); |
| static void init_ring(void); |
| |
| #if defined(W89C840_DEBUG) |
| static void decode_interrupt(u32 intr_status) |
| { |
| printf("Interrupt status: "); |
| |
| #define TRACE_INTR(_intr_) \ |
| if (intr_status & (_intr_)) { printf (" " #_intr_); } |
| |
| TRACE_INTR(NormalIntr); |
| TRACE_INTR(AbnormalIntr); |
| TRACE_INTR(IntrPCIErr); |
| TRACE_INTR(TimerInt); |
| TRACE_INTR(IntrRxDied); |
| TRACE_INTR(RxNoBuf); |
| TRACE_INTR(IntrRxDone); |
| TRACE_INTR(TxFIFOUnderflow); |
| TRACE_INTR(RxErrIntr); |
| TRACE_INTR(TxIdle); |
| TRACE_INTR(IntrTxStopped); |
| TRACE_INTR(IntrTxDone); |
| |
| printf("\n"); |
| /*sleep(1);*/ |
| } |
| #endif |
| |
| /************************************************************************** |
| w89c840_reset - Reset adapter |
| ***************************************************************************/ |
| static void w89c840_reset(struct nic *nic) |
| { |
| int i; |
| |
| /* Reset the chip to erase previous misconfiguration. |
| No hold time required! */ |
| writel(0x00000001, ioaddr + PCIBusCfg); |
| |
| init_ring(); |
| |
| writel(virt_to_bus(w840private.rx_ring), ioaddr + RxRingPtr); |
| writel(virt_to_bus(w840private.tx_ring), ioaddr + TxRingPtr); |
| |
| for (i = 0; i < ETH_ALEN; i++) |
| writeb(nic->node_addr[i], ioaddr + StationAddr + i); |
| |
| /* Initialize other registers. */ |
| /* Configure the PCI bus bursts and FIFO thresholds. |
| 486: Set 8 longword cache alignment, 8 longword burst. |
| 586: Set 16 longword cache alignment, no burst limit. |
| Cache alignment bits 15:14 Burst length 13:8 |
| 0000 <not allowed> 0000 align to cache 0800 8 longwords |
| 4000 8 longwords 0100 1 longword 1000 16 longwords |
| 8000 16 longwords 0200 2 longwords 2000 32 longwords |
| C000 32 longwords 0400 4 longwords |
| Wait the specified 50 PCI cycles after a reset by initializing |
| Tx and Rx queues and the address filter list. */ |
| |
| writel(0xE010, ioaddr + PCIBusCfg); |
| |
| writel(0, ioaddr + RxStartDemand); |
| w840private.csr6 = 0x20022002; |
| check_duplex(); |
| set_rx_mode(); |
| |
| /* Do not enable the interrupts Etherboot doesn't need them */ |
| /* |
| writel(0x1A0F5, ioaddr + IntrStatus); |
| writel(0x1A0F5, ioaddr + IntrEnable); |
| */ |
| #if defined(W89C840_DEBUG) |
| printf("winbond-840 : Done reset.\n"); |
| #endif |
| } |
| |
| #if 0 |
| static void handle_intr(u32 intr_stat) |
| { |
| if ((intr_stat & (NormalIntr|AbnormalIntr)) == 0) { |
| /* we are polling, do not return now */ |
| /*return 0;*/ |
| } else { |
| /* Acknowledge all of the current interrupt sources ASAP. */ |
| writel(intr_stat & 0x001ffff, ioaddr + IntrStatus); |
| } |
| |
| if (intr_stat & AbnormalIntr) { |
| /* There was an abnormal interrupt */ |
| printf("\n-=- Abnormal interrupt.\n"); |
| |
| #if defined(W89C840_DEBUG) |
| decode_interrupt(intr_stat); |
| #endif |
| |
| if (intr_stat & RxNoBuf) { |
| /* There was an interrupt */ |
| printf("-=- <=> No receive buffers available.\n"); |
| writel(0, ioaddr + RxStartDemand); |
| } |
| } |
| } |
| #endif |
| |
| /************************************************************************** |
| w89c840_poll - Wait for a frame |
| ***************************************************************************/ |
| static int w89c840_poll(struct nic *nic, int retrieve) |
| { |
| /* return true if there's an ethernet packet ready to read */ |
| /* nic->packet should contain data on return */ |
| /* nic->packetlen should contain length of data */ |
| int packet_received = 0; |
| |
| #if defined(W89C840_DEBUG) |
| u32 intr_status = readl(ioaddr + IntrStatus); |
| #endif |
| |
| do { |
| /* Code from netdev_rx(dev) */ |
| |
| int entry = w840private.cur_rx % RX_RING_SIZE; |
| |
| struct w840_rx_desc *desc = w840private.rx_head_desc; |
| s32 status = desc->status; |
| |
| if (status & DescOwn) { |
| /* DescOwn bit is still set, we should wait for RX to complete */ |
| packet_received = 0; |
| break; |
| } |
| |
| if ( !retrieve ) { |
| packet_received = 1; |
| break; |
| } |
| |
| if ((status & 0x38008300) != 0x0300) { |
| if ((status & 0x38000300) != 0x0300) { |
| /* Ingore earlier buffers. */ |
| if ((status & 0xffff) != 0x7fff) { |
| printf("winbond-840 : Oversized Ethernet frame spanned " |
| "multiple buffers, entry %d status %X !\n", |
| w840private.cur_rx, status); |
| } |
| } else if (status & 0x8000) { |
| /* There was a fatal error. */ |
| #if defined(W89C840_DEBUG) |
| printf("winbond-840 : Receive error, Rx status %X :", status); |
| if (status & 0x0890) { |
| printf(" RXLEN_ERROR"); |
| } |
| if (status & 0x004C) { |
| printf(", FRAME_ERROR"); |
| } |
| if (status & 0x0002) { |
| printf(", CRC_ERROR"); |
| } |
| printf("\n"); |
| #endif |
| |
| /* Simpy do a reset now... */ |
| w89c840_reset(nic); |
| |
| packet_received = 0; |
| break; |
| } |
| } else { |
| /* Omit the four octet CRC from the length. */ |
| int pkt_len = ((status >> 16) & 0x7ff) - 4; |
| |
| #if defined(W89C840_DEBUG) |
| printf(" netdev_rx() normal Rx pkt ring %d length %d status %X\n", entry, pkt_len, status); |
| #endif |
| |
| nic->packetlen = pkt_len; |
| |
| /* Check if the packet is long enough to accept without copying |
| to a minimally-sized skbuff. */ |
| |
| memcpy(nic->packet, le32desc_to_virt(w840private.rx_ring[entry].buffer1), pkt_len); |
| packet_received = 1; |
| |
| /* Release buffer to NIC */ |
| w840private.rx_ring[entry].status = DescOwn; |
| |
| #if defined(W89C840_DEBUG) |
| /* You will want this info for the initial debug. */ |
| printf(" Rx data %hhX:%hhX:%hhX:%hhX:%hhX:" |
| "%hhX %hhX:%hhX:%hhX:%hhX:%hhX:%hhX %hhX%hhX " |
| "%hhX.%hhX.%hhX.%hhX.\n", |
| nic->packet[0], nic->packet[1], nic->packet[2], nic->packet[3], |
| nic->packet[4], nic->packet[5], nic->packet[6], nic->packet[7], |
| nic->packet[8], nic->packet[9], nic->packet[10], |
| nic->packet[11], nic->packet[12], nic->packet[13], |
| nic->packet[14], nic->packet[15], nic->packet[16], |
| nic->packet[17]); |
| #endif |
| |
| } |
| |
| entry = (++w840private.cur_rx) % RX_RING_SIZE; |
| w840private.rx_head_desc = &w840private.rx_ring[entry]; |
| } while (0); |
| |
| return packet_received; |
| } |
| |
| /************************************************************************** |
| w89c840_transmit - Transmit a frame |
| ***************************************************************************/ |
| |
| static void w89c840_transmit( |
| struct nic *nic, |
| const char *d, /* Destination */ |
| unsigned int t, /* Type */ |
| unsigned int s, /* size */ |
| const char *p) /* Packet */ |
| { |
| /* send the packet to destination */ |
| unsigned entry; |
| int transmit_status; |
| |
| /* Caution: the write order is important here, set the field |
| with the "ownership" bits last. */ |
| |
| /* Fill in our transmit buffer */ |
| entry = w840private.cur_tx % TX_RING_SIZE; |
| |
| memcpy (tx_packet, d, ETH_ALEN); /* dst */ |
| memcpy (tx_packet + ETH_ALEN, nic->node_addr, ETH_ALEN);/* src */ |
| |
| *((char *) tx_packet + 12) = t >> 8; /* type */ |
| *((char *) tx_packet + 13) = t; |
| |
| memcpy (tx_packet + ETH_HLEN, p, s); |
| s += ETH_HLEN; |
| |
| while (s < ETH_ZLEN) |
| *((char *) tx_packet + ETH_HLEN + (s++)) = 0; |
| |
| w840private.tx_ring[entry].buffer1 = virt_to_le32desc(tx_packet); |
| |
| w840private.tx_ring[entry].length = (DescWholePkt | (u32) s); |
| if (entry >= TX_RING_SIZE-1) /* Wrap ring */ |
| w840private.tx_ring[entry].length |= (DescIntr | DescEndRing); |
| w840private.tx_ring[entry].status = (DescOwn); |
| w840private.cur_tx++; |
| |
| w840private.tx_q_bytes = (u16) s; |
| writel(0, ioaddr + TxStartDemand); |
| |
| /* Work around horrible bug in the chip by marking the queue as full |
| when we do not have FIFO room for a maximum sized packet. */ |
| |
| if ((w840private.drv_flags & HasBrokenTx) && w840private.tx_q_bytes > TX_BUG_FIFO_LIMIT) { |
| /* Actually this is left to help finding error tails later in debugging... |
| * See Linux kernel driver in winbond-840.c for details. |
| */ |
| w840private.tx_full = 1; |
| } |
| |
| #if defined(W89C840_DEBUG) |
| printf("winbond-840 : Transmit frame # %d size %d queued in slot %d.\n", w840private.cur_tx, s, entry); |
| #endif |
| |
| /* Now wait for TX to complete. */ |
| transmit_status = w840private.tx_ring[entry].status; |
| |
| load_timer2(TX_TIMEOUT); |
| |
| { |
| #if defined W89C840_DEBUG |
| u32 intr_stat = 0; |
| #endif |
| while (1) { |
| |
| #if defined(W89C840_DEBUG) |
| decode_interrupt(intr_stat); |
| #endif |
| |
| while ( (transmit_status & DescOwn) && timer2_running()) { |
| |
| transmit_status = w840private.tx_ring[entry].status; |
| } |
| |
| break; |
| } |
| } |
| |
| if ((transmit_status & DescOwn) == 0) { |
| |
| #if defined(W89C840_DEBUG) |
| printf("winbond-840 : transmission complete after wait loop iterations, status %X\n", |
| w840private.tx_ring[entry].status); |
| #endif |
| |
| return; |
| } |
| |
| /* Transmit timed out... */ |
| |
| printf("winbond-840 : transmission TIMEOUT : status %X\n", w840private.tx_ring[entry].status); |
| |
| return; |
| } |
| |
| /************************************************************************** |
| w89c840_disable - Turn off ethernet interface |
| ***************************************************************************/ |
| static void w89c840_disable(struct dev *dev) |
| { |
| struct nic *nic = (struct nic *)dev; |
| /* merge reset and disable */ |
| w89c840_reset(nic); |
| |
| /* Don't know what to do to disable the board. Is this needed at all? */ |
| /* Yes, a live NIC can corrupt the loaded memory later [Ken] */ |
| /* Stop the chip's Tx and Rx processes. */ |
| writel(w840private.csr6 &= ~0x20FA, ioaddr + NetworkConfig); |
| } |
| |
| /************************************************************************** |
| w89c840_irq - Enable, Disable, or Force interrupts |
| ***************************************************************************/ |
| static void w89c840_irq(struct nic *nic __unused, irq_action_t action __unused) |
| { |
| switch ( action ) { |
| case DISABLE : |
| break; |
| case ENABLE : |
| break; |
| case FORCE : |
| break; |
| } |
| } |
| |
| /************************************************************************** |
| w89c840_probe - Look for an adapter, this routine's visible to the outside |
| ***************************************************************************/ |
| static int w89c840_probe(struct dev *dev, struct pci_device *p) |
| { |
| struct nic *nic = (struct nic *)dev; |
| u16 sum = 0; |
| int i, j; |
| unsigned short value; |
| |
| if (p->ioaddr == 0) |
| return 0; |
| |
| ioaddr = p->ioaddr; |
| nic->ioaddr = p->ioaddr & ~3; |
| nic->irqno = 0; |
| |
| |
| #if defined(W89C840_DEBUG) |
| printf("winbond-840: PCI bus %hhX device function %hhX: I/O address: %hX\n", p->bus, p->devfn, ioaddr); |
| #endif |
| |
| ioaddr = ioaddr & ~3; /* Mask the bit that says "this is an io addr" */ |
| |
| /* From Matt Hortman <mbhortman@acpthinclient.com> */ |
| if (p->vendor == PCI_VENDOR_ID_WINBOND2 |
| && p->dev_id == PCI_DEVICE_ID_WINBOND2_89C840) { |
| |
| /* detected "Winbond W89c840 Fast Ethernet PCI NIC" */ |
| |
| } else if ( p->vendor == PCI_VENDOR_ID_COMPEX |
| && p->dev_id == PCI_DEVICE_ID_COMPEX_RL100ATX) { |
| |
| /* detected "Compex RL100ATX Fast Ethernet PCI NIC" */ |
| |
| } else { |
| /* Gee, guess what? They missed again. */ |
| printf("device ID : %X - is not a Compex RL100ATX NIC.\n", p->dev_id); |
| return 0; |
| } |
| |
| printf(" %s\n", w89c840_version); |
| |
| adjust_pci_device(p); |
| |
| /* Ok. Got one. Read the eeprom. */ |
| for (j = 0, i = 0; i < 0x40; i++) { |
| value = eeprom_read(ioaddr, i); |
| eeprom[i] = value; |
| sum += value; |
| } |
| |
| for (i=0;i<ETH_ALEN;i++) { |
| nic->node_addr[i] = (eeprom[i/2] >> (8*(i&1))) & 0xff; |
| } |
| printf ("Ethernet addr: %!\n", nic->node_addr); |
| |
| #if defined(W89C840_DEBUG) |
| printf("winbond-840: EEPROM checksum %hX, got eeprom", sum); |
| #endif |
| |
| /* Reset the chip to erase previous misconfiguration. |
| No hold time required! */ |
| writel(0x00000001, ioaddr + PCIBusCfg); |
| |
| if (driver_flags & CanHaveMII) { |
| int phy, phy_idx = 0; |
| for (phy = 1; phy < 32 && phy_idx < 4; phy++) { |
| int mii_status = mdio_read(ioaddr, phy, 1); |
| if (mii_status != 0xffff && mii_status != 0x0000) { |
| w840private.phys[phy_idx++] = phy; |
| w840private.advertising = mdio_read(ioaddr, phy, 4); |
| |
| #if defined(W89C840_DEBUG) |
| printf("winbond-840 : MII PHY found at address %d, status " |
| "%X advertising %hX.\n", phy, mii_status, w840private.advertising); |
| #endif |
| |
| } |
| } |
| |
| w840private.mii_cnt = phy_idx; |
| |
| if (phy_idx == 0) { |
| printf("winbond-840 : MII PHY not found -- this device may not operate correctly.\n"); |
| } |
| } |
| |
| /* point to NIC specific routines */ |
| dev->disable = w89c840_disable; |
| nic->poll = w89c840_poll; |
| nic->transmit = w89c840_transmit; |
| nic->irq = w89c840_irq; |
| |
| w89c840_reset(nic); |
| |
| return 1; |
| } |
| |
| /* Read the EEPROM and MII Management Data I/O (MDIO) interfaces. These are |
| often serial bit streams generated by the host processor. |
| The example below is for the common 93c46 EEPROM, 64 16 bit words. */ |
| |
| /* Delay between EEPROM clock transitions. |
| No extra delay is needed with 33Mhz PCI, but future 66Mhz access may need |
| a delay. Note that pre-2.0.34 kernels had a cache-alignment bug that |
| made udelay() unreliable. |
| The old method of using an ISA access as a delay, __SLOW_DOWN_IO__, is |
| depricated. |
| */ |
| #define eeprom_delay(ee_addr) readl(ee_addr) |
| |
| enum EEPROM_Ctrl_Bits { |
| EE_ShiftClk=0x02, EE_Write0=0x801, EE_Write1=0x805, |
| EE_ChipSelect=0x801, EE_DataIn=0x08, |
| }; |
| |
| /* The EEPROM commands include the alway-set leading bit. */ |
| enum EEPROM_Cmds { |
| EE_WriteCmd=(5 << 6), EE_ReadCmd=(6 << 6), EE_EraseCmd=(7 << 6), |
| }; |
| |
| static int eeprom_read(long addr, int location) |
| { |
| int i; |
| int retval = 0; |
| int ee_addr = addr + EECtrl; |
| int read_cmd = location | EE_ReadCmd; |
| writel(EE_ChipSelect, ee_addr); |
| |
| /* Shift the read command bits out. */ |
| for (i = 10; i >= 0; i--) { |
| short dataval = (read_cmd & (1 << i)) ? EE_Write1 : EE_Write0; |
| writel(dataval, ee_addr); |
| eeprom_delay(ee_addr); |
| writel(dataval | EE_ShiftClk, ee_addr); |
| eeprom_delay(ee_addr); |
| } |
| writel(EE_ChipSelect, ee_addr); |
| |
| for (i = 16; i > 0; i--) { |
| writel(EE_ChipSelect | EE_ShiftClk, ee_addr); |
| eeprom_delay(ee_addr); |
| retval = (retval << 1) | ((readl(ee_addr) & EE_DataIn) ? 1 : 0); |
| writel(EE_ChipSelect, ee_addr); |
| eeprom_delay(ee_addr); |
| } |
| |
| /* Terminate the EEPROM access. */ |
| writel(0, ee_addr); |
| return retval; |
| } |
| |
| /* MII transceiver control section. |
| Read and write the MII registers using software-generated serial |
| MDIO protocol. See the MII specifications or DP83840A data sheet |
| for details. |
| |
| The maximum data clock rate is 2.5 Mhz. The minimum timing is usually |
| met by back-to-back 33Mhz PCI cycles. */ |
| #define mdio_delay(mdio_addr) readl(mdio_addr) |
| |
| /* Set iff a MII transceiver on any interface requires mdio preamble. |
| This only set with older tranceivers, so the extra |
| code size of a per-interface flag is not worthwhile. */ |
| static char mii_preamble_required = 1; |
| |
| #define MDIO_WRITE0 (MDIO_EnbOutput) |
| #define MDIO_WRITE1 (MDIO_DataOut | MDIO_EnbOutput) |
| |
| /* Generate the preamble required for initial synchronization and |
| a few older transceivers. */ |
| static void mdio_sync(long mdio_addr) |
| { |
| int bits = 32; |
| |
| /* Establish sync by sending at least 32 logic ones. */ |
| while (--bits >= 0) { |
| writel(MDIO_WRITE1, mdio_addr); |
| mdio_delay(mdio_addr); |
| writel(MDIO_WRITE1 | MDIO_ShiftClk, mdio_addr); |
| mdio_delay(mdio_addr); |
| } |
| } |
| |
| static int mdio_read(int base_address, int phy_id, int location) |
| { |
| long mdio_addr = base_address + MIICtrl; |
| int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location; |
| int i, retval = 0; |
| |
| if (mii_preamble_required) |
| mdio_sync(mdio_addr); |
| |
| /* Shift the read command bits out. */ |
| for (i = 15; i >= 0; i--) { |
| int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0; |
| |
| writel(dataval, mdio_addr); |
| mdio_delay(mdio_addr); |
| writel(dataval | MDIO_ShiftClk, mdio_addr); |
| mdio_delay(mdio_addr); |
| } |
| /* Read the two transition, 16 data, and wire-idle bits. */ |
| for (i = 20; i > 0; i--) { |
| writel(MDIO_EnbIn, mdio_addr); |
| mdio_delay(mdio_addr); |
| retval = (retval << 1) | ((readl(mdio_addr) & MDIO_DataIn) ? 1 : 0); |
| writel(MDIO_EnbIn | MDIO_ShiftClk, mdio_addr); |
| mdio_delay(mdio_addr); |
| } |
| return (retval>>1) & 0xffff; |
| } |
| |
| #if 0 |
| static void mdio_write(int base_address, int phy_id, int location, int value) |
| { |
| long mdio_addr = base_address + MIICtrl; |
| int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location<<18) | value; |
| int i; |
| |
| if (location == 4 && phy_id == w840private.phys[0]) |
| w840private.advertising = value; |
| |
| if (mii_preamble_required) |
| mdio_sync(mdio_addr); |
| |
| /* Shift the command bits out. */ |
| for (i = 31; i >= 0; i--) { |
| int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0; |
| |
| writel(dataval, mdio_addr); |
| mdio_delay(mdio_addr); |
| writel(dataval | MDIO_ShiftClk, mdio_addr); |
| mdio_delay(mdio_addr); |
| } |
| /* Clear out extra bits. */ |
| for (i = 2; i > 0; i--) { |
| writel(MDIO_EnbIn, mdio_addr); |
| mdio_delay(mdio_addr); |
| writel(MDIO_EnbIn | MDIO_ShiftClk, mdio_addr); |
| mdio_delay(mdio_addr); |
| } |
| return; |
| } |
| #endif |
| |
| static void check_duplex(void) |
| { |
| int mii_reg5 = mdio_read(ioaddr, w840private.phys[0], 5); |
| int negotiated = mii_reg5 & w840private.advertising; |
| int duplex; |
| |
| if (w840private.duplex_lock || mii_reg5 == 0xffff) |
| return; |
| |
| duplex = (negotiated & 0x0100) || (negotiated & 0x01C0) == 0x0040; |
| if (w840private.full_duplex != duplex) { |
| w840private.full_duplex = duplex; |
| |
| #if defined(W89C840_DEBUG) |
| printf("winbond-840 : Setting %s-duplex based on MII # %d negotiated capability %X\n", |
| duplex ? "full" : "half", w840private.phys[0], negotiated); |
| #endif |
| |
| w840private.csr6 &= ~0x200; |
| w840private.csr6 |= duplex ? 0x200 : 0; |
| } |
| } |
| |
| static void set_rx_mode(void) |
| { |
| u32 mc_filter[2]; /* Multicast hash filter */ |
| u32 rx_mode; |
| |
| /* Accept all multicasts from now on. */ |
| memset(mc_filter, 0xff, sizeof(mc_filter)); |
| |
| /* |
| * works OK with multicast enabled. |
| */ |
| |
| rx_mode = AcceptBroadcast | AcceptMyPhys | AcceptMulticast; |
| |
| writel(mc_filter[0], ioaddr + MulticastFilter0); |
| writel(mc_filter[1], ioaddr + MulticastFilter1); |
| w840private.csr6 &= ~0x00F8; |
| w840private.csr6 |= rx_mode; |
| writel(w840private.csr6, ioaddr + NetworkConfig); |
| |
| #if defined(W89C840_DEBUG) |
| printf("winbond-840 : Done setting RX mode.\n"); |
| #endif |
| } |
| |
| /* Initialize the Rx and Tx rings, along with various 'dev' bits. */ |
| static void init_ring(void) |
| { |
| int i; |
| char * p; |
| |
| w840private.tx_full = 0; |
| w840private.tx_q_bytes = w840private.cur_rx = w840private.cur_tx = 0; |
| w840private.dirty_rx = w840private.dirty_tx = 0; |
| |
| w840private.rx_buf_sz = PKT_BUF_SZ; |
| w840private.rx_head_desc = &w840private.rx_ring[0]; |
| |
| /* Initial all Rx descriptors. Fill in the Rx buffers. */ |
| |
| p = &rx_packet[0]; |
| |
| for (i = 0; i < RX_RING_SIZE; i++) { |
| w840private.rx_ring[i].length = w840private.rx_buf_sz; |
| w840private.rx_ring[i].status = 0; |
| w840private.rx_ring[i].next_desc = virt_to_le32desc(&w840private.rx_ring[i+1]); |
| |
| w840private.rx_ring[i].buffer1 = virt_to_le32desc(p + (PKT_BUF_SZ * i)); |
| w840private.rx_ring[i].status = DescOwn | DescIntr; |
| } |
| |
| /* Mark the last entry as wrapping the ring. */ |
| w840private.rx_ring[i-1].length |= DescEndRing; |
| w840private.rx_ring[i-1].next_desc = virt_to_le32desc(&w840private.rx_ring[0]); |
| |
| w840private.dirty_rx = (unsigned int)(i - RX_RING_SIZE); |
| |
| for (i = 0; i < TX_RING_SIZE; i++) { |
| w840private.tx_ring[i].status = 0; |
| } |
| return; |
| } |
| |
| |
| static struct pci_id w89c840_nics[] = { |
| PCI_ROM(0x1050, 0x0840, "winbond840", "Winbond W89C840F"), |
| PCI_ROM(0x11f6, 0x2011, "compexrl100atx", "Compex RL100ATX"), |
| }; |
| |
| struct pci_driver w89c840_driver = { |
| .type = NIC_DRIVER, |
| .name = "W89C840F", |
| .probe = w89c840_probe, |
| .ids = w89c840_nics, |
| .id_count = sizeof(w89c840_nics)/sizeof(w89c840_nics[0]), |
| .class = 0, |
| }; |